diff --git a/po/ca/ahcp.po b/po/ca/ahcp.po
deleted file mode 100644
index 51d63d6..0000000
--- a/po/ca/ahcp.po
+++ /dev/null
@@ -1,116 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-05 18:06+0200\n"
-"Last-Translator: Roger <roger.baig@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ca\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "Servidor AHCP"
-
-# Minor misspelling corrections
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP és un protocol de configuració automàtica per IPv6 i xarxes de doble "
-"pila IPv6/IPv4 dissenyat per fer servir en lloc del descobriment de rutes i "
-"DHCP en xarxes on es difícil o impossible configurar un servidor per "
-"cadascuna de les capes d'enllaç de broadcast, per exemple xarxes mòbils ad-"
-"hoc."
-
-# apòstrof+acrònims http://ca.wikipedia.org/wiki/Ap%C3%B2strof#Observacions
-msgid "Active AHCP Leases"
-msgstr "Leases actius d'AHCP"
-
-msgid "Address"
-msgstr "Adreça"
-
-msgid "Advanced Settings"
-msgstr "Configuració avançada"
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr "Servidors DNS anunciats"
-
-msgid "Announced NTP servers"
-msgstr "Servidors NTP anunciats"
-
-msgid "Announced prefixes"
-msgstr "Prefixos anunciats"
-
-msgid "Collecting data..."
-msgstr "Recopilant informació..."
-
-msgid "Forwarder"
-msgstr "Retransmissor"
-
-msgid "General Setup"
-msgstr "Configuració general"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 i IPv6"
-
-msgid "IPv4 only"
-msgstr "Només IPv4"
-
-msgid "IPv6 only"
-msgstr "Només IPv6"
-
-msgid "Lease directory"
-msgstr "Directori de Lease"
-
-msgid "Lease validity time"
-msgstr "Temps vàlid de Lease"
-
-msgid "Log file"
-msgstr "Fitxer de log"
-
-msgid "Multicast address"
-msgstr "Adreça multicast"
-
-msgid "Operation mode"
-msgstr "Mode d'operació"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Família de protocol"
-
-msgid "Served interfaces"
-msgstr "Interfícies servides"
-
-msgid "Server"
-msgstr "Servidor"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Especifica els servidors NTP IPv4 i IPv6 anunciats"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Especifica els servidors de noms IPv4 i IPv6 anunciats"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Especifica els prefixos de xarxa IPv4 i IPv6 anunciats en notació CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr "El servidor AHCP no està corrent."
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "El servidor AHCP està corrent amb ID %s."
-
-msgid "There are no active leases."
-msgstr "No hi ha Leases actius."
-
-msgid "Unique ID file"
-msgstr "Fitxer ID únic"
diff --git a/po/ca/asterisk.po b/po/ca/asterisk.po
deleted file mode 100644
index 9775758..0000000
--- a/po/ca/asterisk.po
+++ /dev/null
@@ -1,680 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-31 19:18+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Opcions Generals d'Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Directori AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Desa en memòria cau els sons gravats durant la gravació"
-
-#~ msgid "Debug Level"
-#~ msgstr "Nivell de depuració"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Desactiva algunes alertes"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Bolca el nucli en cas de fallada"
-
-#~ msgid "High Priority"
-#~ msgstr "Alta Prioritat"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Inicialitza Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Utilitza l'hora interna"
-
-#~ msgid "Log directory"
-#~ msgstr "Directori de registres"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Número màxim de trucades permeses"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Càrrega màxima per deixar d'acceptar trucades noves"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Desactiva els colors de consola"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Directori de memòria cau dels fitxers de so"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Executa amb els permisos del Grup"
-
-#~ msgid "The User to run as"
-#~ msgstr "Executa amb els permisos de l'Usuari"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Directori de bústia de correu"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Prefixa l'UniquID amb el nom del sistema"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "Munta les rutes de transcodificació via SLINEAR, no directament"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Transmet silenci SLINEAR mentre s'enregistri un canal"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Nivell de detall"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Secció Dialplan"
-
-#~ msgid "include"
-#~ msgstr "inclou"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Connector Dialplan"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Opcions generals de Dialplan"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Permet la transferència"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Buida les variables globals"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "Dialplan Goto"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Conferència Dialplan"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Dialplan Time"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Bústia de correu Dialplan"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Zones de marcatge per Dialplan"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "Prefix per afegir als Dialplan que coincideixin"
-
-#~ msgid "Match International prefix"
-#~ msgstr "Coincideix amb el prefix Internacional"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Prefix (0) per afegir/esborrar a/des de números internacionals"
-
-#~ msgid "localzone"
-#~ msgstr "zona local"
-
-#~ msgid "Match plan"
-#~ msgstr "Pla coincident"
-
-#~ msgid "Connection to use"
-#~ msgstr "Connexió a fer servir"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Mapa de Funcions Principals"
-
-#~ msgid "Attended transfer key"
-#~ msgstr "Tecla de transferència assistida"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "Tecla de transferència cega"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Tecla per desconnectar trucada"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Tecla per trucada en espera"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Funció de trucada en espera"
-
-#~ msgid "ADSI Park"
-#~ msgstr "Trucada en espera ADSI"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "Temps d'espera de transferència assistida (seg)"
-
-#~ msgid "One touch record key"
-#~ msgstr "Tecla de registre d'un toc"
-
-#~ msgid "Name of call context for parking"
-#~ msgstr "Nom del context de la trucada en espera"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Fitxer de so per reproduir a la trucada en espera"
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr "Temps màxim (en ms) entre dígits per l'activació de funció"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Mètode per trobar una ranura de trucada en espera"
-
-#~ msgid "parkedmusicclass"
-#~ msgstr "parkedmusicclass"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Reprodueix to de cortesia a"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Activa les trucades en espera"
-
-#~ msgid "Extension to dial to park"
-#~ msgstr "Extensió per marcar per deixar en espera una trucada"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Temps de trucada en espera (secs)"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "Rang d'extensions per trucada en espera"
-
-#~ msgid "Pickup extension"
-#~ msgstr "Connector de recol·lecció"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Segons a esperar entre dígits quan es transfereix"
-
-#~ msgid "sound when attended transfer is complete"
-#~ msgstr "so quan es completa la transferència assistida"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "so quan falla la transferència assitida"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Recarrega la configuració de maquinari"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Mètode de Reinici"
-
-#~ msgid "Parameter"
-#~ msgstr "Paràmetre"
-
-#~ msgid "Option type"
-#~ msgstr "Tipus d'opció"
-
-#~ msgid "User name"
-#~ msgstr "Nom d'usuari"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Opcions generals IAX"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Permet Codecs"
-
-#~ msgid "Static"
-#~ msgstr "Estàtic"
-
-#~ msgid "Write Protect"
-#~ msgstr "Protecció d'escriptura"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Conferència Meetme"
-
-#~ msgid "Admin PIN"
-#~ msgstr "PIN d'administrador"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "PIN de reunió"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Opcions generals de conferència Meetme"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Número de memòries intermitges d'àudio de 20 ms a utilitzar"
-
-#~ msgid "Modules"
-#~ msgstr "Mòduls"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Aplicació de recepció d'alarma"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Aplicació d'autenticació"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "Assegura't que asterisk no desa CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Comprova que el canal estigui disponible"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Escolta a qualsevol canal"
-
-#~ msgid "Control Playback Application"
-#~ msgstr "Aplicació de control de reproducció"
-
-#~ msgid "Cuts up variables"
-#~ msgstr "Talla les variables"
-
-#~ msgid "Database access functions"
-#~ msgstr "Funcions d'accés a base de dades"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Aplicació de marcatge"
-
-#~ msgid "Virtual Dictation Machine Application"
-#~ msgstr "Aplicació de màquina de dictat virtual"
-
-#~ msgid "Directed Call Pickup Support"
-#~ msgstr "Suport de recollida de trucades adreçades"
-
-#~ msgid "Extension Directory"
-#~ msgstr "Directori de connectors"
-
-#~ msgid "DISA (Direct Inward System Access) Application"
-#~ msgstr "Aplicació DISA (Direct Inward System Access)"
-
-#~ msgid "Dump channel variables Application"
-#~ msgstr "Bolca les variables de canal de l'aplicació"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Aplicació d'eco simple"
-
-#~ msgid "ENUM Lookup"
-#~ msgstr "Consulta ENUM"
-
-#~ msgid "Reevaluates strings"
-#~ msgstr "Reavalua cadenes"
-
-#~ msgid "Executes applications"
-#~ msgstr "Executa aplicacions"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "Interfície d'aplicació IVR externa"
-
-#~ msgid "Fork The CDR into 2 seperate entities"
-#~ msgstr "Bifurca el CDR en 2 entitats separades"
-
-#~ msgid "Get ADSI CPE ID"
-#~ msgstr "Obtingues la ADSI CPE ID"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Rutines de gestió de grup"
-
-#~ msgid "Encode and Stream via icecast and ices"
-#~ msgstr "Codifica i emet via icecast i ices"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Aplicació de transmissió d'imatge"
-
-#~ msgid "Look up Caller*ID name/number from black"
-#~ msgstr "Cerca la ID/nom/número de qui truca de negre"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr "Cerca la ID/nom/número de qui truca de la base de dades local"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Macros de connectors"
-
-#~ msgid "A simple math Application"
-#~ msgstr "Una aplicació de matemàtiques simple"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "Aplicació de suma de verificació MD5"
-
-#~ msgid "Digital Milliwatt (mu-law) Test Application"
-#~ msgstr "Aplicació de prova de milliwat digital (mu-law)"
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Registra una trucada i mescla l'àudio durant la gravació"
-
-#~ msgid "Call Parking and Announce Application"
-#~ msgstr "Aplicació d'anunci de trucades i trucada en espera"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Aplicació de reproducció trivial"
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Requereix que s'entri un número de telèfon"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "Encuament de trucades real"
-
-#~ msgid "Random goto"
-#~ msgstr "Goto aleatori"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Aplicació de lectura de variables"
-
-#~ msgid "Read in a file"
-#~ msgstr "Llegeix en un fitxer"
-
-#~ msgid "Realtime Data Lookup/Rewrite"
-#~ msgstr "Cerca/reescriptura de dades en temps real"
-
-#~ msgid "Trivial Record Application"
-#~ msgstr "Aplicació d'enregistrament trivial"
-
-#~ msgid "Say time"
-#~ msgstr "Digues l'hora"
-
-#~ msgid "Send DTMF digits Application"
-#~ msgstr "Envia aplicació de dígits DTMF"
-
-#~ msgid "Send Text Applications"
-#~ msgstr "Envia aplicacions de text"
-
-#~ msgid "Set CallerID Application"
-#~ msgstr "Estableix l'aplicació CallerID"
-
-#~ msgid "CDR user field apps"
-#~ msgstr "Aplicacions de camp d'usuari CDR"
-
-#~ msgid "load => .so ; Set CallerID Name"
-#~ msgstr "load =&gt; .so ; Estableix el nom CallerID"
-
-#~ msgid "load => .so ; Set CallerID Number"
-#~ msgstr "load =&gt; .so ; Estableix el número CallerID"
-
-#~ msgid "Set RDNIS Number"
-#~ msgstr "Estableix el número RDNIS"
-
-#~ msgid "Set ISDN Transfer Capability"
-#~ msgstr "Estableix la capacitat de transferència XDSI"
-
-#~ msgid "SMS/PSTN handler"
-#~ msgstr "Gestor SMS/PSTN"
-
-#~ msgid "Hangs up the requested channel"
-#~ msgstr "Penja el canal sol·licitat"
-
-#~ msgid "Stack Routines"
-#~ msgstr "Rutines de pila"
-
-#~ msgid "Generic System() application"
-#~ msgstr "Aplicació genèrica de System()"
-
-#~ msgid "Playback with Talk Detection"
-#~ msgstr "Playback amb Detecció de Parla"
-
-#~ msgid "Interface Test Application"
-#~ msgstr "Aplicació de proves d'interfície"
-
-#~ msgid "Transfer"
-#~ msgstr "Transfereix"
-
-#~ msgid "TXTCIDName"
-#~ msgstr "TXTCIDName"
-
-#~ msgid "Send URL Applications"
-#~ msgstr "Envia aplicacions d'URL"
-
-#~ msgid "Custom User Event Application"
-#~ msgstr "Aplicació d'esdeveniments personalitzats d'usuari"
-
-#~ msgid "Send verbose output"
-#~ msgstr "Envia sortida detallada"
-
-#~ msgid "Voicemail"
-#~ msgstr "Bústia de veu"
-
-#~ msgid "Waits until first ring after time"
-#~ msgstr "Espera fins el primer to després del temps"
-
-#~ msgid "Wait For Silence Application"
-#~ msgstr "Espera l'aplicació de silenci"
-
-#~ msgid "While Loops and Conditional Execution"
-#~ msgstr "Execució de bucles while i condicionals"
-
-#~ msgid "Comma Separated Values CDR Backend"
-#~ msgstr "Valors de Backend CDR separats per comes"
-
-#~ msgid "Customizable Comma Separated Values CDR Backend"
-#~ msgstr "Valors de Backend CDR personalitzats separats per comes"
-
-#~ msgid "Asterisk Call Manager CDR Backend"
-#~ msgstr "Backend CDR del gestor de trucades Asterisk"
-
-#~ msgid "MySQL CDR Backend"
-#~ msgstr "Backend CDR MySQL"
-
-#~ msgid "PostgreSQL CDR Backend"
-#~ msgstr "Backend CDR PostgreSQL"
-
-#~ msgid "SQLite CDR Backend"
-#~ msgstr "Backend CDR SQLite"
-
-#~ msgid "Agent Proxy Channel"
-#~ msgstr "Canal de l'Agent Proxy"
-
-#~ msgid "Option chan_iax2"
-#~ msgstr "Opció chan_iax2"
-
-#~ msgid "Local Proxy Channel"
-#~ msgstr "Canal de proxy local"
-
-#~ msgid "Session Initiation Protocol (SIP)"
-#~ msgstr "Protocol d'inicialització de sessió (SIP)"
-
-#~ msgid "Adaptive Differential PCM Coder/Decoder"
-#~ msgstr "Codificador/Decodificador PCM adaptatiu diferencial"
-
-#~ msgid "A-law Coder/Decoder"
-#~ msgstr "Codificador/Decodificador de llei A"
-
-#~ msgid "A-law and Mulaw direct Coder/Decoder"
-#~ msgstr "Codificador/Decodificador directe de llei A i Mu"
-
-#~ msgid "ITU G.726-32kbps G726 Transcoder"
-#~ msgstr "Transcodificador ITU G.726-32kbps G726"
-
-#~ msgid "GSM/PCM16 (signed linear) Codec Translation"
-#~ msgstr "Còdec de traducció GSM/PCM16 (lineal amb signe)"
-
-#~ msgid "Speex/PCM16 (signed linear) Codec Translator"
-#~ msgstr "Còdec de traducció Speex/PCM16 (lineal amb signe)"
-
-#~ msgid "Mu-law Coder/Decoder"
-#~ msgstr "Codificador/Decodificador llei Mu"
-
-#~ msgid "Sun Microsystems AU format (signed linear)"
-#~ msgstr "Format AU de Sun Microsystems (lineal amb signe)"
-
-#~ msgid "G.723.1 Simple Timestamp File Format"
-#~ msgstr "Format de fitxer de marca de temps simple G.723.1"
-
-#~ msgid "Raw G.726 (16/24/32/40kbps) data"
-#~ msgstr "Dades Raw G.726 (16/24/32/40kbps)"
-
-#~ msgid "Raw G729 data"
-#~ msgstr "Dades Raw G729"
-
-#~ msgid "Raw GSM data"
-#~ msgstr "Dades Raw GSM"
-
-#~ msgid "Raw h263 data"
-#~ msgstr "Dades Raw h263"
-
-#~ msgid "JPEG (Joint Picture Experts Group) Image"
-#~ msgstr "Imatge JPEG (Joint Picture Experts Group)"
-
-#~ msgid "Raw uLaw 8khz Audio support (PCM)"
-#~ msgstr "Suport d'àudio Raw llei-u 8khz (PCM)"
-
-#~ msgid "load => .so ; Raw aLaw 8khz PCM Audio support"
-#~ msgstr "load =&gt; .so ; suport d'àudio Raw llei-a 8khz PCM"
-
-#~ msgid "Raw Signed Linear Audio support (SLN)"
-#~ msgstr "Suport d'àudio Raw amb signe lineal (SLN)"
-
-#~ msgid "Dialogic VOX (ADPCM) File Format"
-#~ msgstr "Format de fitxer Dialogic VOX (ADPCM)"
-
-#~ msgid "Microsoft WAV format (8000hz Signed Line"
-#~ msgstr "Format Microsoft WAV (8000hz amb signe lineal)"
-
-#~ msgid "Microsoft WAV format (Proprietary GSM)"
-#~ msgstr "Format Microsoft WAV (GSM propietari)"
-
-#~ msgid "Caller ID related dialplan functions"
-#~ msgstr "Functions de dialplan relacionades amb la ID de qui truca"
-
-#~ msgid "ENUM Functions"
-#~ msgstr "Funcions ENUM"
-
-#~ msgid "URI encoding / decoding functions"
-#~ msgstr "Funcions de codificació / decodificació d'URI"
-
-#~ msgid "Asterisk Extension Language Compiler"
-#~ msgstr "Compilador del llenguatge de connectors d'Asterisk"
-
-#~ msgid "Text Extension Configuration"
-#~ msgstr "Configuració del connector de text"
-
-#~ msgid "load => .so ; Builtin dialplan functions"
-#~ msgstr "load =&gt; .s ; Funcions integrades dialplan"
-
-#~ msgid "Loopback Switch"
-#~ msgstr "Switch loopback"
-
-#~ msgid "Realtime Switch"
-#~ msgstr "Switch en temps real"
-
-#~ msgid "Outgoing Spool Support"
-#~ msgstr "Suport de gestió de cues sortint"
-
-#~ msgid "Wil Cal U (Auto Dialer)"
-#~ msgstr "Wil Cal U (Auto Marcatge)"
-
-#~ msgid "MySQL Config Resource"
-#~ msgstr "Configuració del recurs MySQL"
-
-#~ msgid "ODBC Config Resource"
-#~ msgstr "Configuració del recurs ODBC"
-
-#~ msgid "PGSQL Module"
-#~ msgstr "Mòdul PGSQL"
-
-#~ msgid "Cryptographic Digital Signatures"
-#~ msgstr "Signatures digitals criptogràfiques"
-
-#~ msgid "Call Parking Resource"
-#~ msgstr "Recurs de trucada en espera"
-
-#~ msgid "Indications Configuration"
-#~ msgstr "Configuració d'indicacions"
-
-#~ msgid "Call Monitoring Resource"
-#~ msgstr "Recurs de monitoreig de trucades"
-
-#~ msgid "Music On Hold Resource"
-#~ msgstr "Recurs de música en espera"
-
-#~ msgid "ODBC Resource"
-#~ msgstr "Recurs ODBC"
-
-#~ msgid "SMDI Module"
-#~ msgstr "Mòdul SMDI"
-
-#~ msgid "SNMP Module"
-#~ msgstr "Mòdul SNMP"
-
-#~ msgid "Music On Hold"
-#~ msgstr "Música en espera"
-
-#~ msgid "Application"
-#~ msgstr "Aplicació"
-
-#~ msgid "Directory of Music"
-#~ msgstr "Directori de música"
-
-#~ msgid "Option mode"
-#~ msgstr "Mode d'opció"
-
-#~ msgid "Random Play"
-#~ msgstr "Reproducció aleatòria"
-
-#~ msgid "DTMF mode"
-#~ msgstr "Mode DTMF"
-
-#~ msgid "Primary domain identity for From: headers"
-#~ msgstr "Domini d'identitat primari per les capçaleres From:"
-
-#~ msgid "From user (required by many SIP providers)"
-#~ msgstr "Usuari d'inici (requerit per diversos proveïdors SIP)"
-
-#~ msgid "Ring on incoming dialplan contexts"
-#~ msgstr "Truca en contextos d'entrades dialplan"
-
-#~ msgid "Allow Insecure for"
-#~ msgstr "Permet insegur per"
-
-#~ msgid "Mailbox for MWI"
-#~ msgstr "Bústia de veu per MWI"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "NAT entre el telèfon i l'Asterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "Comprova etiquetes a les capçaleres"
-
-#~ msgid "Reply Timeout (ms) for down connection"
-#~ msgstr "Temps d'esperi per contestar (ms) per caigudes de connexió"
-
-#~ msgid "Register connection"
-#~ msgstr "Registra connexió"
-
-#~ msgid "Dial own extension for mailbox"
-#~ msgstr "Truca el propi connector per la bústia de veu"
-
-#~ msgid "Client Type"
-#~ msgstr "Tipus de client"
-
-#~ msgid "Username"
-#~ msgstr "Nom d'usuari"
-
-#~ msgid "Section sipgeneral"
-#~ msgstr "Secció sipgeneral"
-
-#~ msgid "Allow codecs"
-#~ msgstr "Permet còdecs"
-
-#~ msgid "SIP realm"
-#~ msgstr "Reialme SIP"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "Opcions generals de bústia de veu"
-
-#~ msgid "From Email address of server"
-#~ msgstr "Adreça de correu electrònic d'origen del servidor"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "Bústies de la bústia de veu"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "El correu electrònic conté fitxers adjunts"
-
-#~ msgid "Email"
-#~ msgstr "Correu electrònic"
-
-#~ msgid "Display Name"
-#~ msgstr "Nom a mostrar"
-
-#~ msgid "Password"
-#~ msgstr "Contrasenya"
-
-#~ msgid "zone"
-#~ msgstr "zona"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Configuració de zona de veu"
-
-#~ msgid "Message Format"
-#~ msgstr "Format de missatge"
diff --git a/po/ca/base.po b/po/ca/base.po
deleted file mode 100644
index 2942d6a..0000000
--- a/po/ca/base.po
+++ /dev/null
@@ -1,3615 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-04-05 19:30+0200\n"
-"Last-Translator: Roger <roger.baig@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ca\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(finestra de %d minut, interval de %d segon)"
-
-msgid "(%s available)"
-msgstr "(%s disponible)"
-
-msgid "(empty)"
-msgstr "(buit)"
-
-msgid "(no interfaces attached)"
-msgstr "(sense interfícies adjuntes)"
-
-msgid "-- Additional Field --"
-msgstr "-- Camp addicional --"
-
-msgid "-- Please choose --"
-msgstr "-- Escull, si et plau --"
-
-msgid "-- custom --"
-msgstr "-- personalitzat --"
-
-msgid "1 Minute Load:"
-msgstr "Càrrega d'1 minut:"
-
-msgid "15 Minute Load:"
-msgstr "Càrrega de 15 minuts:"
-
-#, fuzzy
-msgid "40MHz 2nd channel above"
-msgstr "Canal 2on 40MHz per sobre"
-
-#, fuzzy
-msgid "40MHz 2nd channel below"
-msgstr "Canal 2on 40MHz per sota"
-
-msgid "5 Minute Load:"
-msgstr ""
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> port de consulta"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> port del servidor"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"Els servidors <abbr title=\"Domain Name System\">DNS</abbr> seran consultats "
-"per l'ordre del fitxer de resolució"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Adreça <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "Passarel·la <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-"Màscara de xarxa <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"Adreça <abbr title=\"Internet Protocol Version 6\">IPv6</abbr> o Xarxa (CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "Passarel·la <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Configuració <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Nom <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Adreça <abbr title=\"Media Access Control\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"Leases de <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-"<abbr title=\"maximal\">Max.</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"Grandària de paquet <abbr title=\"Extension Mechanisms for Domain Name System"
-"\">EDNS0</abbr> <abbr title=\"maximal\">Max.</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "Consultes concurrents <abbr title=\"maximal\">Max.</abbr>"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "Suport AR"
-
-msgid "ARP retry threshold"
-msgstr "Llindar de reintent ARP"
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr "Punt d'accés"
-
-msgid "Action"
-msgstr "Acció"
-
-msgid "Actions"
-msgstr "Accions"
-
-msgid "Activate this network"
-msgstr "Activa aquesta xarxa"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Rutes <abbr title=\"Internet Protocol Version 4\">IPv4</abbr> actives"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Rutes <abbr title=\"Internet Protocol Version 6\">IPv6</abbr> actives"
-
-msgid "Active Connections"
-msgstr "Connexions actives"
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Afegeix"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-"Afegeix el sufix de domini local als noms servits des dels fitxers de hosts"
-
-msgid "Add new interface..."
-msgstr "Afegeix una interfície nova..."
-
-msgid "Additional Hosts files"
-msgstr "Fitxers de Hosts addicionals"
-
-msgid "Address"
-msgstr "Adreça"
-
-msgid "Address to access local relay bridge"
-msgstr "Adreça per accedir al relay bridge local"
-
-msgid "Administration"
-msgstr "Administració"
-
-msgid "Advanced Settings"
-msgstr "Paràmetres avançats"
-
-msgid "Advertise IPv6 on network"
-msgstr "Anuncia IPv6 a la xarxa"
-
-msgid "Advertised network ID"
-msgstr "ID de xarxa anunciat"
-
-msgid "Alert"
-msgstr "Alerta"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Permet autenticació <abbr title=\"Secure Shell\">SSH</abbr> per contrasenya"
-
-msgid "Allow all except listed"
-msgstr "Permet-les totes menys les llistades"
-
-msgid "Allow listed only"
-msgstr "Permet només les llistades"
-
-msgid "Allow localhost"
-msgstr "Permetre el localhost"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Permetre a màquines remotes de connectar als ports reenviats de l'SSH local"
-
-msgid "Allow root logins with password"
-msgstr "Permetre l'accés del l'administrador amb paraula clau"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Permetre l'accés de l'usurari <em>root</em> amb paraula clau"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr "El rang permès és entre 1 i 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Es crearà una xarxa addicional si deixes això sense marcar."
-
-msgid "Antenna 1"
-msgstr "Antena 1"
-
-msgid "Antenna 2"
-msgstr "Antena 2"
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr "Qualsevol zona"
-
-msgid "Apply"
-msgstr "Aplica"
-
-msgid "Applying changes"
-msgstr "Aplicant els canvis"
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr "Estacions associades"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr "Autenticació"
-
-msgid "Authoritative"
-msgstr "Autoritzada"
-
-msgid "Authorization Required"
-msgstr "Es requereix autenticació"
-
-msgid "Auto Refresh"
-msgstr "Refresc automàtic"
-
-msgid "Available"
-msgstr "Disponible"
-
-msgid "Available packages"
-msgstr "Paquets disponibles"
-
-msgid "Average:"
-msgstr "Mitjana:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Endarrere"
-
-msgid "Back to Overview"
-msgstr "Endarrere cap a Resum"
-
-msgid "Back to configuration"
-msgstr "Endarrere cap a configuració"
-
-msgid "Back to overview"
-msgstr "Endarrere cap a resum"
-
-# Endarrere cap a resultats d'escaneig
-msgid "Back to scan results"
-msgstr ""
-
-msgid "Background Scan"
-msgstr "Escaneig de fons"
-
-msgid "Backup / Flash Firmware"
-msgstr "Còpia de seguretat / Recàrrega de programari"
-
-msgid "Backup / Restore"
-msgstr "Còpia de seguretat / Restauració"
-
-msgid "Backup file list"
-msgstr "Llista de fitxer de recuperació"
-
-msgid "Bad address specified!"
-msgstr "Adreça mal especificada!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr "Pont"
-
-msgid "Bridge interfaces"
-msgstr "Interfície pont"
-
-msgid "Bridge unit number"
-msgstr "Nombre d'unitat de pont"
-
-msgid "Bring up on boot"
-msgstr "Aixecar a l'engegada"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr "Botons"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "Ús de CPU (%)"
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr "Cancel·la"
-
-msgid "Chain"
-msgstr "Cadena"
-
-msgid "Changes"
-msgstr "Canvis"
-
-msgid "Changes applied."
-msgstr "Canvis aplicats."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Canvia la paraula clau de l'administrador per accedir al dispositiu"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check"
-msgstr "Comprovació"
-
-msgid "Checksum"
-msgstr "Suma de verificació"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr "Xifra"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr "Client"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr "Ordre"
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr "Compressió"
-
-msgid "Configuration"
-msgstr "Configuració"
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr "Confirmació"
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr "Límit de connexió"
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr "Codi de País"
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr "Crea / Assigna zona de tallafocs"
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Personalitza el comportament dels <abbr title=\"Light Emitting Diode\">LED</"
-"abbr>s del dispositiu si és possible."
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr "Opcions de DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr "Esborra"
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr "Descripció"
-
-msgid "Design"
-msgstr "Disseny"
-
-msgid "Destination"
-msgstr "Destí"
-
-msgid "Device"
-msgstr "Dispositiu"
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "Desactiva el temporitzador HW-Beacon"
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr "Optimització de distància"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distància al membre de la xarxa més allunyat en metres."
-
-msgid "Diversity"
-msgstr "Diversitat"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"El Dnsmasq és un servidor <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> combinat i un reenviador de <abbr title=\"Domain Name System"
-"\">DNS</abbr> per tallafocs <abbr title=\"Network Address Translation\">NAT</"
-"abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr "No enviïs les respostes de prova"
-
-msgid "Domain required"
-msgstr "Es requereix un domini"
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"No reenviïs les peticions <abbr title=\"Domain Name System\">DNS</abbr> "
-"sense el nom <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "Download and install package"
-msgstr "Descarrega i instal·la el paquet"
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"El Dropbear ofereix accés per la xarxa a consola <abbr title=\"Secure Shell"
-"\">SSH</abbr>i un servidor <abbr title=\"Secure Copy\">SCP</abbr> integrat"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> dinàmic"
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr "Mètode EAP"
-
-msgid "Edit"
-msgstr "Edita"
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Habilita l'<abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr "Activa/Desactiva"
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Habilita l'Spanning Tree Protocol a aquest pont"
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr "Encriptació"
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr "Error"
-
-msgid "Ethernet Adapter"
-msgstr "Adaptador Ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Switch Ethernet"
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "Fast Frames"
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr "Sistema de fitxers"
-
-msgid "Filter"
-msgstr "Filtre"
-
-msgid "Filter private"
-msgstr "Filtra privat"
-
-msgid "Filter useless"
-msgstr "Filtra els no útils"
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr "Cerca paquet"
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Tallafocs"
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr "Estat del tallafocs"
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr "Flags"
-
-msgid "Flash Firmware"
-msgstr "Actualitza el firmware"
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr "Força"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr "Llindar de Fragmentació"
-
-msgid "Frame Bursting"
-msgstr "Frame Bursting"
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr "Salts de freqüència"
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr "Vés a la pàgina de configuració"
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr "Penja"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Ací pots configurar els aspectes bàsics del teu dispositiu, com el nom de la "
-"màquina o el fus horari."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"No mostris l'<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Entrades de noms de màquina"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "Xarxa o adreça <abbr title=\"Internet Protocol Address\">IP</abbr>"
-
-msgid "Hostname"
-msgstr "Nom de màquina"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr "Noms de màquina"
-
-msgid "IP address"
-msgstr "Adreça IP"
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Identitat PEAP"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Si la teva memòria física és insuficient, les dades no usades es poden "
-"intercanviar a un dispositiu d'intercanvi, pel qual hi haurà una quantitat "
-"més gran de memòria <abbr title=\"Random Access Memory\">RAM</abbr> usable. "
-"Tingues en compte que intercanviar dades és un procés molt lent, ja que no "
-"es pot accedir al dispositiu d'intercanvi amb unes taxes tan altes com les "
-"de la <abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr "Ignora la interfície"
-
-msgid "Ignore resolve file"
-msgstr "Ignora el fitxer de Resolució"
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr "In"
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr "Script d'inici"
-
-msgid "Initscripts"
-msgstr "Scripts d'inici"
-
-msgid "Install"
-msgstr "Instal·la"
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr "Interfície"
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interfícies"
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr "Valor d'entrada invàlid"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Usuari i/o contrasenya invàlids! Si us plau prova-ho de nou."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Sembla que intentes actualitzar una imatge que no hi cap a la memòria flaix, "
-"si us plau verifica el fitxer d'imatge!"
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr "Registre del Kernel"
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr "Clau"
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr "Mata"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr "Llengua"
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr "Fitxer de Lease"
-
-msgid "Leasetime"
-msgstr "Temps del Lease"
-
-msgid "Leasetime remaining"
-msgstr "Temps de Lease restant"
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr "Límit"
-
-msgid "Link On"
-msgstr "Enllaç activat"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "Carrega"
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Hora local"
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr "Localitza les consultes"
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr "Registra consultes"
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr "Inici de sessió"
-
-msgid "Logout"
-msgstr "Final de sessió"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr "Filtre d'adreces MAC"
-
-msgid "MAC-Filter"
-msgstr "Filtre MAC"
-
-msgid "MAC-List"
-msgstr "Llista MAC"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr "Taxa Màxima"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr ""
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memòria"
-
-msgid "Memory usage (%)"
-msgstr "Ús de Memòria (%)"
-
-msgid "Metric"
-msgstr "Mètrica"
-
-msgid "Minimum Rate"
-msgstr "Taxa Mínima"
-
-msgid "Minimum hold time"
-msgstr ""
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Mode"
-
-msgid "Modem device"
-msgstr "Dispositiu de Modem"
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr "Punt de muntatge"
-
-#, fuzzy
-msgid "Mount Points"
-msgstr "Punt de muntatge"
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Els punts de muntatge defineixen en quin punt un dispositiu de memòria "
-"s'adjuntarà amb el sistema de fitxers"
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr "Sistemes de fitxers muntats"
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr "Taxa Multicast"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Nom"
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr "Navegació"
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "Xarxa"
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr "No hi ha cadenes a aquesta taula"
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-#, fuzzy
-msgid "No rules in this chain"
-msgstr "No hi ha regles en aquesta cadena"
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "D'acord"
-
-msgid "OPKG-Configuration"
-msgstr "Configuració d&#39;OPKG"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"En aquesta pàgina pots configurar les interfícies de xarxa. Pots fer un pont "
-"entre diverses interfícies clicant sobre el camp \"interfície pont\" i "
-"introduint els noms de les diverses interfícies de xarxa separats per "
-"espais. També pots fer servir la notació <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr> <samp>INTERFACE.VLANNR</samp> (<abbr title=\"per "
-"exemple\">p.e.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr "Opcions"
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr "Out"
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr "Canals d'exteriors"
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "Vista general"
-
-msgid "Owner"
-msgstr "Propietari"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr "Encapsulació PPPoA"
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "Nom del paquet"
-
-msgid "Packets"
-msgstr "Paquets"
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr "Contrasenya"
-
-msgid "Password authentication"
-msgstr "Autenticació per contrasenya"
-
-msgid "Password of Private Key"
-msgstr "Contrasenya de la clau privada"
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr "Ruta als Certificats CA"
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "Ruta a la clau privada"
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr "Arranca de nou"
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr "Si us plau entra el teu nom d'usuari i contrasenya."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Si us plau espera: Dispositiu arrancant-se de nou"
-
-msgid "Policy"
-msgstr "Política"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-#, fuzzy
-msgid "Prevents client-to-client communication"
-msgstr "Evita la comunicació Client a Client"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "continua"
-
-msgid "Processes"
-msgstr "Processos"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr "Llindar RTS/CTS"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Llegeix <code>/etc/ethers</code> per configurar el servidor <abbr title="
-"\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Arranca de nou"
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr "Arranca de nou el sistema operatiu del teu dispositiu"
-
-msgid "Receive"
-msgstr "Rep"
-
-msgid "Receiver Antenna"
-msgstr "Antena receptora"
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr "Referències"
-
-msgid "Regulatory Domain"
-msgstr "Domini regulatori"
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr "Esborra"
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr "Reemplaça entrada"
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Reinicia"
-
-msgid "Reset Counters"
-msgstr "Reinicia Comptadors"
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr "Reinicia Tallafocs"
-
-msgid "Restore backup"
-msgstr "Restaura còpia de seguretat"
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr "Reverteix"
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-#, fuzzy
-msgid "Routes"
-msgstr "Ruta"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Les rutes especifiquen per quina interfície i passarel·la es pot arribar a "
-"un cert ordinador o xarxa."
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Desa"
-
-msgid "Save & Apply"
-msgstr "Desa & Aplica"
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr "Escaneja"
-
-msgid "Scheduled Tasks"
-msgstr "Tasques programades"
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-#, fuzzy
-msgid "Separate Clients"
-msgstr "Aïlla clients"
-
-msgid "Separate WDS"
-msgstr "WDS Separats"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "Serveis"
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr "Mida"
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr "Salta al contingut"
-
-msgid "Skip to navigation"
-msgstr "Salta a la navegació"
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr "Programari"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr "Origen"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr "Inici"
-
-msgid "Start priority"
-msgstr "Prioritat d'inici"
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr "Rutes IPv4 estàtiques"
-
-msgid "Static IPv6 Routes"
-msgstr "Rutes IPv6 estàtiques"
-
-msgid "Static Leases"
-msgstr "Leases estàtics"
-
-msgid "Static Routes"
-msgstr "Rutes estàtiques"
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Estat"
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr "Ordre estricte"
-
-msgid "Submit"
-msgstr "Envia"
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr "Switch"
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "System Log"
-msgstr "Registre del sistema"
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr "Taula"
-
-msgid "Target"
-msgstr "Destí"
-
-msgid "Terminate"
-msgstr "Acaba"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"El fitxer de dispositiu de la memòria o partició (<abbr title=\"per exemple"
-"\">p.e.</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"El sistema the fitxers que es va fer servir per formatar la memòria (<abbr "
-"title=\"per exemple example\">p.e.</abbr> <samp><abbr title=\"Third Extended "
-"Filesystem\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr "S&#39;han desfet els següents canvis"
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"El sistema s'està actualitzant ara.<br />NO APAGUIS EL DISPOSITIU!<br /"
-">Espera uns minuts abans no intentis connectar-te de nou. Pot ser necessari "
-"que renovis l'adreça del teu ordinador per arribar al dipositiu de nou, "
-"depenent de la teva configuració"
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"La imatge pujada no conté un format suportat. Assegura't de triar el format "
-"d'imatge genèric per la teva plataforma."
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Aquest és l'únic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> a la teva xarxa local"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Aquest és el crontab del sistema en el qual es poden definir tasques "
-"programades."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Aquesta llista mostra una vista general sobre els processos corrent al "
-"sistema actualment i el seu estat."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Aquesta pàgina ofereix una vista general de les connexions de xarxa actives "
-"actualment."
-
-msgid "This section contains no values yet"
-msgstr "Aquesta secció no conté cap valor encara"
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Zona horària"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-#, fuzzy
-msgid "Traffic"
-msgstr "Tràfic"
-
-msgid "Transfer"
-msgstr "Transferència"
-
-msgid "Transmission Rate"
-msgstr "Taxa de transmissió"
-
-msgid "Transmit"
-msgstr "Transmet"
-
-msgid "Transmit Power"
-msgstr "Potència de transmissió"
-
-msgid "Transmitter Antenna"
-msgstr "Antena transmissora"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "Mode Turbo"
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr "Tipus"
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Canvis sense desar"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr "Fitxer pujat"
-
-msgid "Uptime"
-msgstr "Temps d'activitat"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Fes servir <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Usat"
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr "Nom d'usuari"
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "Versió"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr "Mode WMM"
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr "Alerta"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Alerta: Hi ha canvis que no s'han desat i que es perdran mentre s'arranca de "
-"nou!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr "Sense fils"
-
-msgid "Wireless Adapter"
-msgstr "Adaptador sense fils"
-
-msgid "Wireless Network"
-msgstr "Xarxa sense fils"
-
-msgid "Wireless Overview"
-msgstr "Resum sense fils"
-
-msgid "Wireless Security"
-msgstr "Seguretat sense fils"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Sense fils està deshabilitat o sense associar"
-
-msgid "Wireless is restarting..."
-msgstr "Sense fils està reiniciant..."
-
-msgid "Wireless network is disabled"
-msgstr "La xarxa sense fils està deshabilitada"
-
-msgid "Wireless network is enabled"
-msgstr "La xarxa sense fils està habilitada"
-
-msgid "Wireless restarted"
-msgstr "Sense fils reinciat"
-
-msgid "Wireless shut down"
-msgstr "Sense fils aturat"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Escriure les peticions DNS rebudes al syslog"
-
-msgid "XR Support"
-msgstr "Suport XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Pots activar o desactivar els scripts d'inici instal·lats ací. Els canvis "
-"s'aplicaran després d'arrancar de nou el dispositiu.<br /><strong>Atenció: "
-"Si desactives scripts d'inici necessaris com el \"network\", el teu "
-"dispositiu pot resultar inaccessible!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Has d'activar el Java Script al teu navegador o LuCI no funcionarà "
-"correctament."
-
-msgid "any"
-msgstr "qualsevol"
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr "pontejat"
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "crea un pont entre les interfícies especificades"
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "deshabilita"
-
-msgid "expired"
-msgstr "finalitzat"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"fitxer on els leases de <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> s'emmagatzemaran"
-
-msgid "forward"
-msgstr "transemès"
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "ajuda"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "si el destí és una xarxa"
-
-msgid "input"
-msgstr "entrada"
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "fitxer <abbr title=\"Domain Name System\">DNS</abbr> local"
-
-msgid "no"
-msgstr "no"
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "cap"
-
-msgid "off"
-msgstr "parat"
-
-msgid "on"
-msgstr "engegat"
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr "encaminat"
-
-msgid "tagged"
-msgstr "marcat"
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr "il·limitat"
-
-msgid "unspecified"
-msgstr "sense espeficicar"
-
-msgid "unspecified -or- create:"
-msgstr "sense espeficicar -o- crear:"
-
-msgid "untagged"
-msgstr "sense marcar"
-
-msgid "yes"
-msgstr "Sí"
-
-msgid "« Back"
-msgstr "« Endarrere"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Esperant un encaminador..."
-
-#~ msgid "Active Leases"
-#~ msgstr "Leases Actius"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encriptat\">Encr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr ""
-#~ "Escaneig <abbr title=\"Xarxa sense fils d&#39;àrea local\">WLAN</abbr>"
-
-#~ msgid "Create Network"
-#~ msgstr "Crea Xarxa"
-
-#~ msgid "Networks"
-#~ msgstr "Xarxes"
-
-#~ msgid "Power"
-#~ msgstr "Potència"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Xarxes sense fils del teu entorn local"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "Notació <abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>: "
-#~ "adreça/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "Servidor <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "Broadcast <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Adreça <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Els ports de xarxa del teu router es poden combinar amb diverses <abbr "
-#~ "title=\"Virtual Local Area Network\">VLAN</abbr>s en les que els "
-#~ "ordinador es poden comunicar directament entre ells. Les <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s es fan servir normalment per "
-#~ "separar segments de xarxa diferents. Normalment, hi ha un port de Pujada "
-#~ "per defecte per la següent xarxa major, com Internet, i altres ports per "
-#~ "una xarxa local."
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Fitxers a guardar quan s&#39;actualitzi un nou firmware"
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Aquí pots personalitzar la configuració i funcionalitats de <abbr title="
-#~ "\"Interfície de configuració Lua\">LuCI</abbr>"
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Accions Post-commit"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Aquestes comandes s&#39;executaran automàticament quan es publiqui una "
-#~ "configuració <abbr title=\"Configuració d&#39;Interfície Unificada\">UCI</"
-#~ "abbr> determinada, permetent que els canvis s&#39;apliquin a l&#39;"
-#~ "instant."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"Interfície d'Usuari\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "Servidor <abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Punt d'accés (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Opcions pppd addicionals"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Desconnexió Automàtica"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Arxiu de seguretat"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configura el servidor DNS local per fer servir els servidors anunciats "
-#~ "pel peer PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Script de connexió"
-
-#~ msgid "Create backup"
-#~ msgstr "Crea còpia de seguretat"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Script de desconnexió"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Edita llistes de paquets i destins d&#39;instal·lació"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Habilita IPv6 a l'enllaç PPP"
-
-#~ msgid "Firmware image"
-#~ msgstr "Imatge de firmware"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Ací pots crear una còpia de seguretat i restaurar la teva configuració "
-#~ "del router i - si és possible - reiniciar el router als paràmetres per "
-#~ "defecte."
-
-#~ msgid "Installation targets"
-#~ msgstr "Objectius d'instal·lació"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Mantingues els fitxers de configuració"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Permet que el pppd reemplaci la ruta per defecte actual per fer servir "
-#~ "les interfícies PPP després de connectar-se amb èxit"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr ""
-#~ "Permet que el pppd executi aquest script abans d'establir l'enllaç PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr ""
-#~ "Permet que el pppd executi aquest script abans de desconnectar l'enllaç "
-#~ "PPP"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Assegura't d'introduir el codi pin correcte o pots bloquejar la teva "
-#~ "targeta SIM!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "La majoria d'ells són servidors de xarxa, que ofereixen un cert servei "
-#~ "pel teu dispositiu o xarxa, com l'accés a consola, servir pàgines web com "
-#~ "el <abbr title=\"Interfície de configuració Lua\">LuCI</abbr>, fer "
-#~ "enrutament mesh, enviar e-mails, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Número de connexions de test fallades per iniciar reconnexió automàtica"
-
-#~ msgid "PIN code"
-#~ msgstr "Codi PIN"
-
-#~ msgid "Package lists"
-#~ msgstr "Llistes de paquets"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr ""
-#~ "Continua desfent tots els paràmetres i reiniciant els valors per defecte "
-#~ "del firmware?"
-
-#~ msgid "Processor"
-#~ msgstr "Processador"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Port Radius"
-
-#, fuzzy
-#~ msgid "Radius-Server"
-#~ msgstr "Servidor Radius"
-
-#~ msgid "Replace default route"
-#~ msgstr "Reemplaça la ruta per defecte"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Reinicia els valors per defecte del router"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Segons a esperar per tal que el modem estigui apunt abans de provar de "
-#~ "connectar-se"
-
-#~ msgid "Service type"
-#~ msgstr "Tipus de servei"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Els serveis i dimonis realitzen certes tasques al teu dispositiu."
-
-#~ msgid "Settings"
-#~ msgstr "Configuració"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Temps d'espera de configuració"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Ho sento, l'OpenWRT no suporta una actualització del sistema en aquesdta "
-#~ "plataforma.<br />Has actualitzar manualment el teu dispositiu."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Especifica arguments de línia de comanda addicionals pel pppd"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "El node de dispositiu del teu modem, p.e. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr ""
-#~ "Temps (en segons) després del qual les connexions sense fer servir es "
-#~ "tancaran"
-
-#~ msgid "Update package lists"
-#~ msgstr "Actualitza llistes de paquets"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr ""
-#~ "Penja una imatge d'OpenWRT per actualitzar el firmware del dispositiu."
-
-#~ msgid "Upload image"
-#~ msgstr "Penja imatge"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Fes servir peer DNS"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Necessites instal·lar \"comgt\" per suport UMTS/GPRS, \"ppp-mod-pppoe\" "
-#~ "per suport PPPoE, \"ppp-mod-pppoa\" per suport PPPoA o \"pptp\" per "
-#~ "suport PPtP"
-
-#~ msgid "back"
-#~ msgstr "enrere"
-
-#~ msgid "buffered"
-#~ msgstr "emmagatzemat en memòria intermèdia"
-
-#~ msgid "cached"
-#~ msgstr "emmagatzemat en memòria cau"
-
-#~ msgid "free"
-#~ msgstr "lliure"
-
-#~ msgid "static"
-#~ msgstr "estàtic"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Interfície de configuració Lua\">LuCI</abbr> és una "
-#~ "col·lecció de programari lliure Lua, incloent un framework web <abbr "
-#~ "title=\"Model-Vista-Control·lador\">MVC</abbr> i una interfície web per "
-#~ "dispositius empotrats. <abbr title=\"Interfície de configuració Lua"
-#~ "\">LuCI</abbr> està llicenciada sota la Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "Claus <abbr title=\"Secure Shell\">SSH</abbr>"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Un servidor web HTTP/1.1 lleuger escrit en C i LUA dissenyat per servir "
-#~ "LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Un servidor web petit, que es pot fer servir per servir el <abbr title="
-#~ "\"Interfície de configuració Lua\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "Sobre"
-
-#~ msgid "Addresses"
-#~ msgstr "Addreces"
-
-#~ msgid "Admin Password"
-#~ msgstr "Contrasenya d&#39;administrador"
-
-#~ msgid "Alias"
-#~ msgstr "Àlies"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Reialme d'Autenticació"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Port de pont"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Canvia la contrasenya de l'administrador del sistema (Usuari <code>root</"
-#~ "code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Client + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Fitxer de configuració"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Temps d'espera de la connexió excedit"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Desenvolupadors Contribuïdors"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP assignat"
-
-#~ msgid "Document root"
-#~ msgstr "Arrel del document"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Activa el Keep-Alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Pont Ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Ací pots enganxar les claus públiques <abbr title=\"Secure Shell\">SSH</"
-#~ "abbr> (una per línia) per l'autenticació <abbr title=\"Secure Shell"
-#~ "\">SSH</abbr> per clau pública."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Configuració IP"
-
-#~ msgid "Interface Status"
-#~ msgstr "Estat d'Interfície"
-
-#~ msgid "Lead Development"
-#~ msgstr "Desenvolupadors principals"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "No configurat"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Contrasenya canviada amb èxit"
-
-#~ msgid "Plugin path"
-#~ msgstr "Directori de connectors"
-
-#~ msgid "Ports"
-#~ msgstr "Ports"
-
-#~ msgid "Primary"
-#~ msgstr "Primari"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Pàgina d&#39;inici del projecte"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Gràcies a"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "El reialme que es mostrarà a la sol·licitiu d'autenticació per pàgines "
-#~ "protegides."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Error desconegut"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "per defecte a <code>/etc/httpd.conf</code>"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Llistes de paquets actualitzades"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Actualitza paquets instal·lats"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Ací també es poden veure els registres del kernel o dels serveis, per "
-#~ "tenir una vista general del seu estat actual.'iwscan = 'Escaneig <abbr "
-#~ "title=\"Xarxa sense fils d&#39;àrea local\">WLAN</abbr>"
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Ací pots trobar informació sobre l&#39;estat actual del sistema, com la "
-#~ "freqüència de rellotge de la <abbr title=\"Unitat Central de Processament"
-#~ "\">CPU</abbr>, l&#39;ús de memòria o les dades d&#39;interfície de xarxa."
-
-#~ msgid "Search file..."
-#~ msgstr "Cerca fitxer..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Interfície de configuració Lua\">LuCI</abbr> és una "
-#~ "interfície gràfica amigable, lliure i flexible per configurar l&#39;"
-#~ "OpenWRT Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "I ara diverteix-te amb el teu router!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Com que volem millorar aquesta interfície sempre, volem la teva opinió i "
-#~ "els teus suggeriments."
-
-#~ msgid "Hello!"
-#~ msgstr "Hola!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Alerta: A <abbr title=\"Interfície de configuració Lua\">LuCI</abbr> els "
-#~ "canvis s&#39;han de confirmar clicant \"Canvis --> Desa &amp; Aplica\" "
-#~ "abans que s&#39;apliquin."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "A les pàgines següents podràs ajustar tots els paràmetres importants del "
-#~ "teu router."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr ""
-#~ "L&#39;equip de <abbr title=\"Interfície de configuració Lua\">LuCI</abbr>"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Aquesta és l&#39;àrea d&#39;administració de <abbr title=\"Interfície de "
-#~ "configuració Lua\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Interfície d&#39;usuari"
-
-#~ msgid "enable"
-#~ msgstr "habilita"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr "(opcional)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "Port <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "Es consultarà el servidor <abbr title=\"Domain Name System\">DNS</abbr> "
-#~ "en l'ordre del fitxer de Resolució"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"màxims\">max.</abbr> leases <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "<abbr title=\"màxima\">max.</abbr> mida de paquet <abbr title=\"Extension "
-#~ "Mechanisms for Domain Name System\">EDNS0</abbr>"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "Aïllament d'AP"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Afegeix la xarxa sense fils a la xarxa física"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Mida de segment Clamp"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Crea Xarxa"
-
-#~ msgid "Devices"
-#~ msgstr "Dispositius"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "No reenviïs les cerques inverses per la xarxa local"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Habilita el Servidor TFTP"
-
-#~ msgid "Errors"
-#~ msgstr "Errors"
-
-#~ msgid "Essentials"
-#~ msgstr "Essencials"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Expandeix els Noms de Domini"
-
-#~ msgid "First leased address"
-#~ msgstr "Primera adreça de lease"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Resol problemes amb llocs web inassolibles, enviant formularis o altres "
-#~ "comportaments inesperats d'alguns ISPs."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Adreça <abbr title=\"Media Access Control\">MAC</abbr>"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Ací pots configurar els dispositius sense fils instal·lats."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignora <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Independent (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Connexió a Internet"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Uneix-te (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Leases"
-
-#~ msgid "Local Domain"
-#~ msgstr "Domini Local"
-
-#~ msgid "Local Network"
-#~ msgstr "Xarxa Local"
-
-#~ msgid "Local Server"
-#~ msgstr "Servidor Local"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Imatge de Càrrega de Xarxa"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Nom de Xarxa (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Número d'adreces de lease"
-
-#~ msgid "Path"
-#~ msgstr "Ruta"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Realitza accions"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Evita la comunicació Client a Client"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Proveeix (Punt d'Accés)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Fitxer de Resolució"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Arrel del Servidor TFTP"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "S&#39;han aplicat els següents canvis"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Quan s&#39;actualitza un nou firmware amb un <abbr title=\"Interfície de "
-#~ "configuració Lua\">LuCI</abbr> aquests fitxers s&#39;afegiran a la "
-#~ "instal·lació del nou firmware."
-
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "Wireless"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Amb el <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "els membres d'una xarxa poden rebre automàticament els seus paràmetres de "
-#~ "xarxa (adreça <abbr title=\"Internet Protocol\">IP</abbr>, màscara de "
-#~ "xarxa, servidor <abbr title=\"Domain Name System\">DNS</abbr>, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Pots fer servir diverses xarxes sense fils amb un sol dispositiu. Tingues "
-#~ "en compte que hi ha certes restriccions específiques del maquinari i dels "
-#~ "controlados. Normalment, pots operar 1 xarxa Ad-Hoc o fins a 3 xarxes en "
-#~ "mode Master i 1 xarxa en mode Client simultàniament.\"a_w_netid = \"Nom "
-#~ "de la xarxa (<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>)"
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Necessites instal·lar \"ppp-mod-pppoe\" per suport PPPoE o \"pptp\" per "
-#~ "suport PPtP"
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#~ msgid "additional hostfile"
-#~ msgstr "fitxer de noms addicional"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "afegeix Noms de Domini a les entrades de noms al fitxer resolv"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "estàtic"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "reconnecta automàticament"
-
-#~ msgid "concurrent queries"
-#~ msgstr "consultes concurrents"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "deshabilita el <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr> per aquesta interfície"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "desconnecta per inactivitat durant"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "no emmagatzemis en memòria cau els desconeguts"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "filtra les consultes <abbr title=\"Domain Name System\">DNS</abbr> no "
-#~ "útils de sistemes Windows"
-
-#~ msgid "installed"
-#~ msgstr "instal·lat"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "localitza el nom de màquina depenent de la seva subxarxa"
-
-#~ msgid "not installed"
-#~ msgstr "no instal·lat"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "evita emmagatzemar en memòria cau les respostes <abbr title=\"Domain Name "
-#~ "System\">DNS</abbr> negatives"
-
-#~ msgid "query port"
-#~ msgstr "port de consulta"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmès / rebut"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "Xarxes contingudes"
-
-#~ msgid "all"
-#~ msgstr "tots"
-
-#~ msgid "Code"
-#~ msgstr "Codi"
-
-#~ msgid "Distance"
-#~ msgstr "Distància"
-
-#~ msgid "Legend"
-#~ msgstr "Llegenda"
-
-#~ msgid "Library"
-#~ msgstr "Llibreria"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "pàgina de manual de &#39;%s&#39;"
-
-#~ msgid "Package Manager"
-#~ msgstr "Gestor de paquets"
-
-#~ msgid "Service"
-#~ msgstr "Servei"
-
-#~ msgid "Statistics"
-#~ msgstr "Estadístiques"
-
-#~ msgid "zone"
-#~ msgstr "Zona"
diff --git a/po/ca/commands.po b/po/ca/commands.po
deleted file mode 100644
index 6fbb983..0000000
--- a/po/ca/commands.po
+++ /dev/null
@@ -1,90 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/ca/coovachilli.po b/po/ca/coovachilli.po
deleted file mode 100644
index d4160d2..0000000
--- a/po/ca/coovachilli.po
+++ /dev/null
@@ -1,653 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-29 01:03+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
-
-#~ msgid "General configuration"
-#~ msgstr "Configuració general"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Configuració CoovaChilli general"
-
-#~ msgid "Command socket"
-#~ msgstr "Socket de comanda"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "SocketUNIX usat per comunicació amb chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Configuració d'interval de refresc"
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Re-llegeix el fitxer de configuració i les consultes DNS cada interval "
-#~ "segons. Això té el mateix efecte que enviar el senyal HUP. Si l'interval "
-#~ "és 0 (zero) es deshabilita la funció."
-
-#~ msgid "Pid file"
-#~ msgstr "Fitxer PID"
-
-#~ msgid "Filename to put the process id"
-#~ msgstr "Nom de fitxer on posar la ID de procés"
-
-#~ msgid "State directory"
-#~ msgstr "Directori d'estat"
-
-#~ msgid "Directory of non-volatile data"
-#~ msgstr "Directori de dades no volàtils"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "Configuració TUN/TAP"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Configuració de xarxa/tun"
-
-#~ msgid "Network down script"
-#~ msgstr "Script de baixada de xarxa"
-
-#~ msgid ""
-#~ "Script executed after a session has moved from authorized state to "
-#~ "unauthorized"
-#~ msgstr ""
-#~ "Script executat quan es mou una sessió des de l'estat autoritzat a no "
-#~ "autoritzat"
-
-#~ msgid "Network up script"
-#~ msgstr "Script de pujada de xarxa"
-
-#~ msgid "Script executed after the tun network interface has been brought up"
-#~ msgstr "Script executat després que la interfície de xarxa tun s'hagi alçat"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Servidor DNS primari"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Servidor DNS secundari"
-
-#~ msgid "Domain name"
-#~ msgstr "Nom de domini"
-
-#~ msgid ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-#~ msgstr ""
-#~ "S'utilitza per informar el client sobre el no mde domini a utilitzar per "
-#~ "les consultes DNS"
-
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Bateria d'adreces IP dinàmiques"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Especifica una bateria d'adreces IP dinàmiques"
-
-#~ msgid "IP down script"
-#~ msgstr "Scripts de baixada IP"
-
-#~ msgid "Script executed after the tun network interface has been taken down"
-#~ msgstr ""
-#~ "Script executat després que s'hagi abaixat la interfície de xarxa tun"
-
-#~ msgid "IP up script"
-#~ msgstr "Script de pujada IP"
-
-#~ msgid ""
-#~ "Script executed after the TUN/TAP network interface has been brought up"
-#~ msgstr ""
-#~ "Script executat després que s'hagi apujat la interfície de xarxa TUN/TAP"
-
-#~ msgid "Uplink subnet"
-#~ msgstr "Subxarxa de pujada"
-
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr "Adreça de xarxa de la interfície d'enllaç de pujada (notació CIDR)"
-
-#~ msgid "Static IP address pool"
-#~ msgstr "Bateria d'adreces IP estàtiques"
-
-#~ msgid "Specifies a pool of static IP addresses"
-#~ msgstr "Especifica una bateria d'adreces IP estàtiques"
-
-#~ msgid "TUN/TAP device"
-#~ msgstr "Dispositiu TUN/TAP"
-
-#~ msgid "The specific device to use for the TUN/TAP interface"
-#~ msgstr "El dispositiu específic utilitzar per la interfície TUN/TAP"
-
-#~ msgid "TX queue length"
-#~ msgstr "Llargària de la cua TX"
-
-#~ msgid "The TX queue length to set on the TUN/TAP interface"
-#~ msgstr "La llargària de la cua TX per establir la interfície TUN/TAP"
-
-#~ msgid "Use TAP device"
-#~ msgstr "Utilitza dispositiu TAP"
-
-#~ msgid "Use the TAP interface instead of TUN"
-#~ msgstr "Utilitza la interfície TAP en comptes de TUN"
-
-#~ msgid "DHCP configuration"
-#~ msgstr "Configuració DHCP"
-
-#~ msgid "Set DHCP options for connecting clients"
-#~ msgstr "Estebleix les opcions DHCP pels clients connectats"
-
-#~ msgid "DHCP end number"
-#~ msgstr "Número final de DHCP"
-
-#~ msgid "Where to stop assigning IP addresses (default 254)"
-#~ msgstr "Quan deixar d'assignar adreces IP (per defecte 254)"
-
-#~ msgid "DHCP interface"
-#~ msgstr "Interfície DHCP"
-
-#~ msgid "Ethernet interface to listen to for the downlink interface"
-#~ msgstr ""
-#~ "Interfície Ethernet per escoltar les connexions a la interfície de baixada"
-
-#~ msgid "Listen MAC address"
-#~ msgstr "Escolta adreça MAC"
-
-#~ msgid ""
-#~ "MAC address to listen to. If not specified the MAC address of the "
-#~ "interface will be used"
-#~ msgstr ""
-#~ "Adreça MAC per escoltar. Si no s'especifica, s'utilitzarà l'adreça MAC de "
-#~ "la interfície."
-
-#~ msgid "DHCP start number"
-#~ msgstr "Número d'inici de DHCP"
-
-#~ msgid "Where to start assigning IP addresses (default 10)"
-#~ msgstr "Quan començar a assignar adreces IP (per defecte 10)"
-
-#~ msgid "Enable IEEE 802.1x"
-#~ msgstr "Activa IEEE 802.1x"
-
-#~ msgid "Enable IEEE 802.1x authentication and listen for EAP requests"
-#~ msgstr "Activa l'autenticació IEEE 802.1x i escolta peticions EAP"
-
-#~ msgid "Leasetime"
-#~ msgstr "Temps de Lease"
-
-#~ msgid "Use a DHCP lease of seconds (default 600)"
-#~ msgstr "Utilitza un lease de segons (per defecte 600)"
-
-#~ msgid "Allow session update through RADIUS"
-#~ msgstr "Permet l'actualització de sessió a través de RADIUS"
-
-#~ msgid ""
-#~ "Allow updating of session parameters with RADIUS attributes sent in "
-#~ "Accounting-Response"
-#~ msgstr ""
-#~ "Permet l'actualització dels paràmetres de sessió amb atributs RADIUS "
-#~ "enviats per Accounting-Response"
-
-#~ msgid "Admin password"
-#~ msgstr "Contrasenya d'administració"
-
-#~ msgid ""
-#~ "Password to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Contrasenya per utilitzar per autenticació d'usuari administrador per "
-#~ "agafar configurcions Chilli i establir una sessió \"system\" de dispositiu"
-
-#~ msgid "Admin user"
-#~ msgstr "Usuari administrador"
-
-#~ msgid ""
-#~ "User-name to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Nom d'usuari per utilitzar per autenticació d'usuari administrador per "
-#~ "agafar configurcions Chilli i establir una sessió \"system\" de dispositiu"
-
-#~ msgid "Do not check disconnection requests"
-#~ msgstr "No comprovis les peticions de desconnexió"
-
-#~ msgid "Do not check the source IP address of radius disconnect requests"
-#~ msgstr ""
-#~ "No comprovis l'origen de l'adreça IP de les peticions de desconnexió "
-#~ "RADIUS"
-
-#~ msgid "RADIUS disconnect port"
-#~ msgstr "Port de desconnexió RADIUS"
-
-#~ msgid "UDP port to listen to for accepting radius disconnect requests"
-#~ msgstr "Port UDP per acceptar peticions de desconnexió RADIUS"
-
-#~ msgid "NAS IP"
-#~ msgstr "NAS IP"
-
-#~ msgid "Value to use in RADIUS NAS-IP-Address attribute"
-#~ msgstr "Valor per utilitzar a l'atribut RADIUS adreça NAS-IP"
-
-#~ msgid "NAS MAC"
-#~ msgstr "NAS MAC"
-
-#~ msgid "MAC address value to use in RADIUS Called-Station-ID attribute"
-#~ msgstr ""
-#~ "Valor d'adreça MAC per utilitzar a l'atribiut RADIUS Called-Station-ID"
-
-#~ msgid "Allow OpenID authentication"
-#~ msgstr "Permet autenticació OpenID"
-
-#~ msgid ""
-#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
-#~ "openidauth in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Permet autenticació OpenID enviant ChilliSpot-Config=allow-openidauth als "
-#~ "Access-Requests de RADIUS"
-
-#~ msgid "RADIUS accounting port"
-#~ msgstr "Port d'accounting RADIUS"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius accounting requests (default 1813)"
-#~ msgstr ""
-#~ "Port UDP a utilitzar per les peticions d'accounting RADIUS (per defecte "
-#~ "1813)"
-
-#~ msgid "RADIUS authentication port"
-#~ msgstr "Port d'autenticació RADIUS"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius authentication requests (default "
-#~ "1812)"
-#~ msgstr ""
-#~ "Port UDP a utilitzar per les peticions d'autenticació RADIUS (per defecte "
-#~ "1812)"
-
-#~ msgid "Option radiuscalled"
-#~ msgstr "Opció radiuscalled"
-
-#~ msgid "RADIUS listen address"
-#~ msgstr "Adreça per rebre connexions RADIUS"
-
-#~ msgid "Local interface IP address to use for the radius interface"
-#~ msgstr "Adreça IP d'interfície local per utilitzar per la interfície RADIUS"
-
-#~ msgid "RADIUS location ID"
-#~ msgstr "ID de localització RADIUS"
-
-#~ msgid "WISPr Location ID"
-#~ msgstr "ID de localització WISPr"
-
-#~ msgid "RADIUS location name"
-#~ msgstr "Nom de localització RADIUS"
-
-#~ msgid "WISPr Location Name"
-#~ msgstr "Nom de localització WISPr"
-
-#~ msgid "NAS ID"
-#~ msgstr "NAS ID"
-
-#~ msgid "Network access server identifier"
-#~ msgstr "Identificació de servidor d'accés de xarxa"
-
-#~ msgid "Option radiusnasip"
-#~ msgstr "Opció radiusnasip"
-
-#~ msgid "NAS port type"
-#~ msgstr "Tipus de port NAS"
-
-#~ msgid ""
-#~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
-#~ msgstr ""
-#~ "Valor de l'atribut NAS-Port-Type. Per defecte 19 (Wireless-IEEE-802.11)"
-
-#~ msgid "Send RADIUS VSA"
-#~ msgstr "Envia RADIUS VSA"
-
-#~ msgid "Send the ChilliSpot-OriginalURL RADIUS VSA in Access-Request"
-#~ msgstr "Envia el RADIUS VSA ChilliSpot-OriginalURl al Access-Request"
-
-#~ msgid "RADIUS secret"
-#~ msgstr "Secret RADIUS"
-
-#~ msgid "Radius shared secret for both servers"
-#~ msgstr "Secret compartit RADIUS pels dos servidors"
-
-#~ msgid "RADIUS server 1"
-#~ msgstr "Servidor RADIUS 1"
-
-#~ msgid "The IP address of radius server 1"
-#~ msgstr "L'adreça IP del servidor RADIUS 1"
-
-#~ msgid "RADIUS server 2"
-#~ msgstr "Servidor RADIUS 2"
-
-#~ msgid "The IP address of radius server 2"
-#~ msgstr "L'adreça IP del servidor RADIUS 2"
-
-#~ msgid "Swap octets"
-#~ msgstr "Intercanvia octets"
-
-#~ msgid ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
-#~ "to RADIUS attribtues"
-#~ msgstr ""
-#~ "Intercanvia el significat dels \"octets d'entrada\" i els \"octets de "
-#~ "sortida\" com es relacionen els atributs RADIUS"
-
-#~ msgid "Allow WPA guests"
-#~ msgstr "Permet convidats WPA"
-
-#~ msgid ""
-#~ "Allows WPA Guest authentication by sending ChilliSpot-Config=allow-wpa-"
-#~ "guests in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Permet l'autenticació de convidats WPA enviant un ChilliSpot-Config=allow-"
-#~ "wpa-guests als Access-Requests de RADIUS"
-
-#~ msgid "Proxy client"
-#~ msgstr "Client proxy"
-
-#~ msgid ""
-#~ "IP address from which radius requests are accepted. If omitted the server "
-#~ "will not accept radius requests"
-#~ msgstr ""
-#~ "Adreça IP des de la qual s'accepten les peticions RADIUS. Si s'omet, el "
-#~ "servidor no acceptarà peticions RADIUS"
-
-#~ msgid "Proxy listen address"
-#~ msgstr "Adreça que rep connexions del proxy"
-
-#~ msgid "Local interface IP address to use for accepting radius requests"
-#~ msgstr ""
-#~ "L'adreça IP de la interfície local a utilitzar per acceptar peticions "
-#~ "RADIUS"
-
-#~ msgid "Proxy port"
-#~ msgstr "Port proxy"
-
-#~ msgid "UDP Port to listen to for accepting radius requests"
-#~ msgstr "Port UDP a rebre connexions per acceptar peticions RADIUS"
-
-#~ msgid "Proxy secret"
-#~ msgstr "Secret de proxy"
-
-#~ msgid "Radius shared secret for clients"
-#~ msgstr "Secret compartit de RADIUS pels clients"
-
-#~ msgid "UAM configuration"
-#~ msgstr "Configuració UAM"
-
-#~ msgid "Unified Configuration Method settings"
-#~ msgstr "Preferències de Mètode de Configuració Unificat"
-
-#~ msgid "Use Chilli XML"
-#~ msgstr "Utilitza XML Chilli"
-
-#~ msgid "Return the so-called Chilli XML along with WISPr XML"
-#~ msgstr "Retorna l'XML Chilli juntament amb l'XML WISPr"
-
-#~ msgid "Default idle timeout"
-#~ msgstr "Temps d'espera d'inactivitat màxim per defecte"
-
-#~ msgid "Default idle timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Temps d'espera d'inactivitat màxim per defecte excepte si s'estableix pel "
-#~ "RADIUS (per defecte 0)"
-
-#~ msgid "Default interim interval"
-#~ msgstr "Interval provisional predeterminat"
-
-#~ msgid ""
-#~ "Default interim-interval for RADIUS accounting unless otherwise set by "
-#~ "RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Interval provisional predeterminat per accounting RADIUS excepte si "
-#~ "s'estableix pel RADIUS (per defecte 0)"
-
-#~ msgid "Default session timeout"
-#~ msgstr "Temps d'espera màxim de sessió per defecte"
-
-#~ msgid ""
-#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Temps d'espera màxim de sessió per defecte excepte si s'estableix pel "
-#~ "RADIUS (per defecte 0)"
-
-#~ msgid "Inspect DNS traffic"
-#~ msgstr "Inspeccions tràfic DNS"
-
-#~ msgid ""
-#~ "Inspect DNS packets and drop responses with any non- A, CNAME, SOA, or MX "
-#~ "records to prevent dns tunnels (experimental)"
-#~ msgstr ""
-#~ "Inspecciona paquets DNS i descarta ls respostes per qualsevol registre "
-#~ "que no sigui A, CNAME, SOA o MX per prevenir túnels DNS (experimental)"
-
-#~ msgid "Local users file"
-#~ msgstr "Fitxers d'usuaris local"
-
-#~ msgid ""
-#~ "A colon seperated file containing usernames and passwords of locally "
-#~ "authenticated users"
-#~ msgstr ""
-#~ "Un fitxer contenint usuaris i contrasenyes separats per punts d'usuaris "
-#~ "autenticats localment"
-
-#~ msgid "Location name"
-#~ msgstr "Nom de localització"
-
-#~ msgid "Human readable location name used in JSON interface"
-#~ msgstr "Nom de localització llegible utilitzat en l'interfície JSON"
-
-#~ msgid "Do not redirect to UAM server"
-#~ msgstr "No readrecis al servidor UAM"
-
-#~ msgid ""
-#~ "Do not return to UAM server on login success, just redirect to original "
-#~ "URL"
-#~ msgstr ""
-#~ "No retornis al servidor UAM amb quan s'iniciï la sessió amb èxit, "
-#~ "readreça només a la URL original"
-
-#~ msgid "Do not do WISPr"
-#~ msgstr "No facis WISPr"
-
-#~ msgid "Do not do any WISPr XML, assume the back-end is doing this instead"
-#~ msgstr "No facis cap XML WISPr, assumeix que el back-end ho està fent"
-
-#~ msgid "Post auth proxy"
-#~ msgstr "Proxy post autenticació"
-
-#~ msgid ""
-#~ "Used with postauthproxyport to define a post authentication HTTP proxy "
-#~ "server"
-#~ msgstr ""
-#~ "Utilitzat amb postauthproxyport per definir una autenticació HTTP "
-#~ "posterior de proxy server"
-
-#~ msgid "Post auth proxy port"
-#~ msgstr "Port proxy post autenticació"
-
-#~ msgid ""
-#~ "Used with postauthproxy to define a post authentication HTTP proxy server"
-#~ msgstr ""
-#~ "Utilitzat amb postauthproxy per definir un servidor proxy HTTP "
-#~ "d'autenticació posterior"
-
-#~ msgid "Allowed resources"
-#~ msgstr "Recursos permesos"
-
-#~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr ""
-#~ "Llista dels recursos que el client pot accedir sense autenticar-se primer"
-
-#~ msgid "Allow any DNS server"
-#~ msgstr "Permet qualsevol servidor DNS"
-
-#~ msgid "Allow any DNS server for unauthenticated clients"
-#~ msgstr "Permet qualsevol servidor DNS per clients no autenticats"
-
-#~ msgid "Allow any IP address"
-#~ msgstr "Permet qualsevol adreça IP"
-
-#~ msgid ""
-#~ "Allow clients to use any IP settings they wish by spoofing ARP "
-#~ "(experimental)"
-#~ msgstr ""
-#~ "Permet que els clients utilitzin qualsevol configuració IP que vulguin "
-#~ "fent ARP spoofind (experimental)"
-
-#~ msgid "Allowed domains"
-#~ msgstr "Dominis permesos"
-
-#~ msgid ""
-#~ "Defines a list of domain names to automatically add to the walled garden"
-#~ msgstr ""
-#~ "Defineix una llista de noms de domini per afegir automàticament al jardí "
-#~ "tancat"
-
-#~ msgid "UAM homepage"
-#~ msgstr "Pàgina d'inici UAM"
-
-#~ msgid "URL of homepage to redirect unauthenticated users to"
-#~ msgstr "URL de la pàgina d'inici per readreçar usuari no autenticats"
-
-#~ msgid "UAM static content port"
-#~ msgstr "Port de contingut estàtic UAM"
-
-#~ msgid "TCP port to bind to for only serving embedded content"
-#~ msgstr "Port TCP on escoltar per servir només contingut empotrat"
-
-#~ msgid "UAM listening address"
-#~ msgstr "Adreça per on escoltar UAM"
-
-#~ msgid "IP address to listen to for authentication of clients"
-#~ msgstr "Adreça IP on escoltar pels l'autenticació dels clients"
-
-#~ msgid "UAM logout IP"
-#~ msgstr "IP de final de sessió UAM"
-
-#~ msgid ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults "
-#~ "to 1.1.1.1)"
-#~ msgstr ""
-#~ "Utilitza aquesta adreça IP per finalitzar la sessió d'un que hi accedeix "
-#~ "instantàniament (per defecte 1.1.1.1)"
-
-#~ msgid "UAM listening port"
-#~ msgstr "Port on escoltar UAM"
-
-#~ msgid "TCP port to bind to for authenticating clients (default 3990)"
-#~ msgstr ""
-#~ "Port TCP per on escoltar l'autenticació de clients (per defecte 3990)"
-
-#~ msgid "UAM secret"
-#~ msgstr "Secret UAM"
-
-#~ msgid "Shared secret between uamserver and chilli"
-#~ msgstr "Secret compartit entre el uamserver i el chilli"
-
-#~ msgid "UAM server"
-#~ msgstr "Servidor UAM"
-
-#~ msgid "URL of web server to use for authenticating clients"
-#~ msgstr "URL del servidor URL a utilitzar per clients autenticats"
-
-#~ msgid "UAM user interface"
-#~ msgstr "Interfície d'usuari UAM"
-
-#~ msgid ""
-#~ "An init.d style program to handle local content on the uamuiport web "
-#~ "server"
-#~ msgstr ""
-#~ "Un programa de l'stil init.d per gestionar el contingut local al servidor "
-#~ "web uamuiport"
-
-#~ msgid "Use status file"
-#~ msgstr "Utilitza fitxer d'estat"
-
-#~ msgid ""
-#~ "Write the status of clients in a non-volatile state file (experimental)"
-#~ msgstr ""
-#~ "Escriu l'estat dels clients en un fitxer d'estat no volàtil (experimental)"
-
-#~ msgid "WISPr login url"
-#~ msgstr "URL d'inici de sessió WISPr"
-
-#~ msgid "Specific URL to be given in WISPr XML LoginURL"
-#~ msgstr "URL específica a donar a la URL d'inici de sessió de l'XML WISPr"
-
-#~ msgid "CGI program"
-#~ msgstr "Programa CGI"
-
-#~ msgid ""
-#~ "Executable to run as a CGI type program (like haserl) for URLs with "
-#~ "extention .chi"
-#~ msgstr ""
-#~ "Executable per executar com un programa de tipus CGI (com el haserl) per "
-#~ "URLs amb extensió .chi"
-
-#~ msgid "Web content directory"
-#~ msgstr "Directori de contingut web"
-
-#~ msgid "Directory where embedded local web content is placed"
-#~ msgstr "Directori on se situa el contingut web local empotrat"
-
-#~ msgid "MAC configuration"
-#~ msgstr "Configuració MAC"
-
-#~ msgid "Configure MAC authentication"
-#~ msgstr "Configura l'autenticació MAC"
-
-#~ msgid "Allowed MAC addresses"
-#~ msgstr "Adreces MAC permeses"
-
-#~ msgid "List of MAC addresses for which MAC authentication will be performed"
-#~ msgstr "Llista d'adreces MAC per les que es realitzarà autenticació MAC"
-
-#~ msgid "Authenticate locally allowed MACs"
-#~ msgstr "Autentica localment les MACs permeses"
-
-#~ msgid "Authenticate allowed MAC addresses without the use of RADIUS"
-#~ msgstr "Autentica les adreces MAC permeses sense l'ús del RADIUS"
-
-#~ msgid "Enable MAC authentification"
-#~ msgstr "Activa l'autenticació MAC"
-
-#~ msgid "Try to authenticate all users based on their mac address alone"
-#~ msgstr ""
-#~ "Intenta autenticar tots els usuaris basats només en la seva adreça MAC"
-
-#~ msgid "Password"
-#~ msgstr "Contrasenya"
-
-#~ msgid "Password used when performing MAC authentication"
-#~ msgstr "Contrasenya utilitzada quan es realitza autenticació MAC"
-
-#~ msgid "Suffix"
-#~ msgstr "Sufix"
-
-#~ msgid "coovachilli_macauth_macsuffix_desc"
-#~ msgstr ""
-#~ "Sufix per afegir a l'adreça MAC per formar el nm d'usuari, que s'enviarà "
-#~ "al servidor RADIUS"
diff --git a/po/ca/ddns.po b/po/ca/ddns.po
deleted file mode 100644
index 72c0263..0000000
--- a/po/ca/ddns.po
+++ /dev/null
@@ -1,95 +0,0 @@
-#  ddns.pot
-#  generated from ./applications/luci-ddns/luasrc/i18n/ddns.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2009-05-26 20:19+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Check for changed IP every"
-msgstr "Comprova si s'ha canviat la IP cada"
-
-#, fuzzy
-msgid "Check-time unit"
-msgstr "Unitat de temps de comprovació"
-
-#, fuzzy
-msgid "Custom update-URL"
-msgstr "URL d'actualització personalitzada"
-
-msgid "Dynamic DNS"
-msgstr "DNS dinàmic"
-
-#, fuzzy
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"El DNS dinàmic permet que el teu router sigui localitzable amb un nom de "
-"màquin fix mentre té una adreça IP dinàmica."
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "Força actualització cada"
-
-#, fuzzy
-msgid "Force-time unit"
-msgstr "Unitat de temps de forceig"
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-#, fuzzy
-msgid "Source of IP address"
-msgstr "Origen de l'adreça IP"
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/ca/diag_core.po b/po/ca/diag_core.po
deleted file mode 100644
index 90fefc5..0000000
--- a/po/ca/diag_core.po
+++ /dev/null
@@ -1,29 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/ca/diag_devinfo.po b/po/ca/diag_devinfo.po
deleted file mode 100644
index 27d2b46..0000000
--- a/po/ca/diag_devinfo.po
+++ /dev/null
@@ -1,205 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/ca/ffwizard.po b/po/ca/ffwizard.po
deleted file mode 100644
index 6217b8f..0000000
--- a/po/ca/ffwizard.po
+++ /dev/null
@@ -1,158 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/ca/firewall.po b/po/ca/firewall.po
deleted file mode 100644
index 3ca51b1..0000000
--- a/po/ca/firewall.po
+++ /dev/null
@@ -1,565 +0,0 @@
-#  luci-fw.pot
-#  generated from ./applications/luci-fw/luasrc/i18n/luci-fw.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2009-05-27 00:43+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr "Acció"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr "Adreça destí"
-
-msgid "Destination port"
-msgstr "Port de destí"
-
-#, fuzzy
-msgid "Destination zone"
-msgstr "Destí"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr "Descarta els paquets invàlids"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-#, fuzzy
-msgid "Enable SYN-flood protection"
-msgstr "Protecció SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr "Port extern"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Tallafocs"
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr "Entrada"
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-#, fuzzy
-msgid "Internal IP address"
-msgstr "Adreça interna"
-
-#, fuzzy
-msgid "Internal port"
-msgstr "Port extern"
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-#, fuzzy
-msgid "MSS clamping"
-msgstr "Clamping MSS"
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr "Sortida"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-#, fuzzy
-msgid "Source IP address"
-msgstr "Adreça MAC d'origen"
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-#, fuzzy
-msgid "Source address"
-msgstr "Adreça MAC d'origen"
-
-msgid "Source port"
-msgstr "Port d'origen"
-
-#, fuzzy
-msgid "Source zone"
-msgstr "Port d'origen"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"El tallafocs crea zones a les teves interfícies de xarxa per controlar el "
-"flux de tràfic de xarxa."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr "Zones"
-
-msgid "accept"
-msgstr "accepta"
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr "descarta"
-
-msgid "reject"
-msgstr "rebutja"
-
-#~ msgid "Destination"
-#~ msgstr "Destí"
-
-#~ msgid "Source"
-#~ msgstr "Origen"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Port intern (opcional)"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Regles avançades"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Les regles avançades et deixen personalitzar el teu tallafocs per les "
-#~ "teves necessitats. Només s'hi correspondran les connexions noves. Als "
-#~ "paquets que pertanyen una connexió oberta se'ls permet passar el "
-#~ "tallafocs automàticament."
-
-#~ msgid "Port forwarding"
-#~ msgstr "Readreçament de port"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "El readreçament de ports permet proveir serveis de la xarxa interna a una "
-#~ "xarxa externa."
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Readreçament de tràfic"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "El readreçament de tràfic et permet canviar l'adreça destí dels paquets "
-#~ "reenviats."
-
-#, fuzzy
-#~ msgid "Network"
-#~ msgstr "Xarxes"
-
-#~ msgid "Traffic Control"
-#~ msgstr "Control de tràfic"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Tràfic zona a zona"
-
-#, fuzzy
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Ací pots especificar quin tràfic de xarxes es permet entre les zones de "
-#~ "xarxa. Només s'hi correspondren les connexions noves. Als paquets que "
-#~ "pertanyen una connexió oberta se'ls permet passar el tallafocs "
-#~ "automàticament. Si experimentes problemes de connexió ocasionals, intenta "
-#~ "activar el Clamping MSS, si no desactiva'l per raons de rendiment."
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#, fuzzy
-#~ msgid "Destination IP"
-#~ msgstr "Destí"
-
-#, fuzzy
-#~ msgid "IP address"
-#~ msgstr "Adreça IP"
-
-#, fuzzy
-#~ msgid "Source MAC-address"
-#~ msgstr "Adreça MAC d'origen"
-
-#~ msgid "Custom forwarding"
-#~ msgstr "Reenviament personalitzat"
-
-#~ msgid "Input Zone"
-#~ msgstr "Zona d'entrada"
-
-#~ msgid "Output Zone"
-#~ msgstr "Zona de sortida"
-
-#~ msgid "External Zone"
-#~ msgstr "Zona externa"
-
-#~ msgid "Source MAC"
-#~ msgstr "MAC origen"
-
-#~ msgid "Defaults"
-#~ msgstr "Per defecte"
-
-#~ msgid ""
-#~ "These are the default settings that are used if no other rules match."
-#~ msgstr ""
-#~ "Aquesta és la configuració per defecte utilitzada si no hi ha cap altra "
-#~ "regla que es correspongui."
-
-#~ msgid ""
-#~ "Zones part the network interfaces into certain isolated areas to separate "
-#~ "network traffic. One or more networks can belong to a zone. The MASQ-flag "
-#~ "enables NAT masquerading for all outgoing traffic on this zone."
-#~ msgstr ""
-#~ "Les zones parteixen les interfícies de xarxa en certes àrees aïllades per "
-#~ "separar el tràfic de xarxa. Una o més xarxes poden pertànyer a una zona. "
-#~ "El flag MASQ activa el NAT masquerading per tot el tràfic sortint "
-#~ "d'aquesta zona."
-
-#~ msgid "MASQ"
-#~ msgstr "MASQ"
-
-#~ msgid "contained networks"
-#~ msgstr "Xarxes contingudes"
diff --git a/po/ca/freifunk-policyrouting.po b/po/ca/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/ca/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/ca/freifunk.po b/po/ca/freifunk.po
deleted file mode 100644
index 261c08a..0000000
--- a/po/ca/freifunk.po
+++ /dev/null
@@ -1,394 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-07-04 19:09+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr "Coordenades"
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr "Adreça electrònica"
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Hola i benvingut a la xarxa de"
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nom de màquina"
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Si estàs interessat en el nostre projecte, llavors contacta la comunitat "
-"local"
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"L'accés a Internet depèn de les condicions tècniques i organitzatives, i pot "
-"funcionar o no per tu."
-
-msgid "It is operated by"
-msgstr "És administrat per"
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr "Localització"
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memòria"
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr "Nickname"
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr "Avís"
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr "Telèfon"
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr "Nom real"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr "Això és un punt d'accés"
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Som una iniciativa per establir una xarxa mesh lliure, independent i oberta."
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr "Pots trobar més informació sobre la iniciativa global Freifunk a"
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/ca/hd_idle.po b/po/ca/hd_idle.po
deleted file mode 100644
index d66615e..0000000
--- a/po/ca/hd_idle.po
+++ /dev/null
@@ -1,53 +0,0 @@
-#  hd_idle.pot
-#  generated from ./applications/luci-hd_idle/luasrc/i18n/hd_idle.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2009-05-26 20:25+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Disk"
-msgstr "Disc"
-
-#, fuzzy
-msgid "Enable"
-msgstr "Habilita la depuració"
-
-msgid "Enable debug"
-msgstr "Habilita la depuració"
-
-#, fuzzy
-msgid "Idle-time"
-msgstr "Temps d'inactivitat"
-
-#, fuzzy
-msgid "Idle-time unit"
-msgstr "Unitat de temps d'inactivitat"
-
-msgid "Settings"
-msgstr "Configuració"
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle és un programa per ralentitzar els discos externs després d'un "
-"període de temps inactiu."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
diff --git a/po/ca/meshwizard.po b/po/ca/meshwizard.po
deleted file mode 100644
index 180d771..0000000
--- a/po/ca/meshwizard.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/ca/minidlna.po b/po/ca/minidlna.po
deleted file mode 100644
index 8df98a8..0000000
--- a/po/ca/minidlna.po
+++ /dev/null
@@ -1,163 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/ca/mmc_over_gpio.po b/po/ca/mmc_over_gpio.po
deleted file mode 100644
index c66873e..0000000
--- a/po/ca/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-27 00:44+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "Configuració"
diff --git a/po/ca/multiwan.po b/po/ca/multiwan.po
deleted file mode 100644
index d175246..0000000
--- a/po/ca/multiwan.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/ca/ntpc.po b/po/ca/ntpc.po
deleted file mode 100644
index 90f7699..0000000
--- a/po/ca/ntpc.po
+++ /dev/null
@@ -1,57 +0,0 @@
-#  ntpc.pot
-#  generated from ./applications/luci-ntpc/luasrc/i18n/ntpc.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2009-05-27 00:46+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Clock Adjustment"
-msgstr "Ajustament de rellotge"
-
-#, fuzzy
-msgid "Count of time measurements"
-msgstr "Compte de mesures d'horari"
-
-msgid "Current system time"
-msgstr "Horari del sistema actual"
-
-msgid "General"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-#, fuzzy
-msgid "Offset frequency"
-msgstr "Compensació de freqüència"
-
-msgid "Port"
-msgstr ""
-
-msgid "Synchronizes the system time"
-msgstr "Sincronitza l'hora del sistema"
-
-msgid "Time Server"
-msgstr ""
-
-#, fuzzy
-msgid "Time Servers"
-msgstr "Servidor d'horari"
-
-msgid "Time Synchronisation"
-msgstr "Sincronització d'horari"
-
-#, fuzzy
-msgid "Update interval (in seconds)"
-msgstr "Intèrval d'actualització (en s)"
-
-msgid "empty = infinite"
-msgstr "buit = infinit"
diff --git a/po/ca/olsr.po b/po/ca/olsr.po
deleted file mode 100644
index 50d78ee..0000000
--- a/po/ca/olsr.po
+++ /dev/null
@@ -1,584 +0,0 @@
-#  olsr.pot
-#  generated from ./applications/luci-olsr/luasrc/i18n/olsr.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-29 01:03+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Active MID announcements"
-msgstr "Anuncis MID actius"
-
-msgid "Active OLSR nodes"
-msgstr "Nodes OLSR actius"
-
-msgid "Active host net announcements"
-msgstr "Anuncis de xarxa de màquines actives"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr "Xarxa anunciada"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr "Compte de retransmissió previst"
-
-msgid "FIB metric"
-msgstr "Mètrica FIB"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr "Configuració general"
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr "Interval HNA"
-
-msgid "HNA validity time"
-msgstr "Temps de validesa HNA"
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr "Interval Hello"
-
-msgid "Hello validity time"
-msgstr "Temps de validesa Hello"
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr "Broadcast IPv4"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr "Protocol d'Internet"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr "Rutes OLSR conegudes"
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr "Envelliment LQ"
-
-msgid "LQ algorithm"
-msgstr "Algoritme LQ"
-
-msgid "LQ fisheye"
-msgstr "LQ fisheye"
-
-msgid "LQ level"
-msgstr "Nivell LQ"
-
-msgid "Last hop"
-msgstr "Últim salt"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr "Llibreria"
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr "IP d'interfície local"
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr "Interval MID"
-
-msgid "MID validity time"
-msgstr "Temps de validesa MID"
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Assegura't que l'OLSRd està corrent, que el connector \"txtinfo\" està "
-"carregat, configurat al port 2006, i que accepta connexions de \"127.0.0.1\"."
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr "IP del veí"
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr "Màscara de xarxa"
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr "Anuncis OLSR - HNA"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - Connectors"
-
-msgid "OLSR Daemon"
-msgstr "Dimoni OLSR"
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr "Connexions OLSR"
-
-msgid "OLSR gateway"
-msgstr "Passarel·la OLSR"
-
-msgid "OLSR node"
-msgstr "Node OLSR"
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Vista general d'anuncis de xarxa de màquines OLSR actives"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Vista general de les connexions OLSR establertes actualment"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Vista general dels nodes OLSR coneguts actualment"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Vista general de rutes conegudes actualment a altres nodes OLSR"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Vista general d'anuncis d'interfície múltiple coneguts"
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr "Configuració de connector"
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr "Taxa de sondeig"
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr "Prefix"
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr "Interfícies OSLR secundàries"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr "Interval TC"
-
-msgid "TC validity time"
-msgstr "Temps de validesa TC"
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "No s'ha pogut connectar al dimoni OLSR"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr "Utilitza histèresi"
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr "Voluntat"
diff --git a/po/ca/openvpn.po b/po/ca/openvpn.po
deleted file mode 100644
index 7ed806f..0000000
--- a/po/ca/openvpn.po
+++ /dev/null
@@ -1,554 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-28 12:55+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', o 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Accepta opcions rebudes del servidor"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr "Afegeix ruta després d'establir connexió"
-
-msgid "Additional authentication over TLS"
-msgstr "Autenticació addicional sobre TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Permet tràfic client a client"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Permet múltiples clients amb el mateix certificat"
-
-msgid "Allow only one session"
-msgstr "Permet només una sessió"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Permet al remot canviar la seva IP o port"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Màxim de clients connectats pemès"
-
-msgid "Allowed maximum of internal"
-msgstr "Màxim permès d'interns"
-
-msgid "Allowed maximum of new connections"
-msgstr "Màxim de noves connexions permesès"
-
-msgid "Append log to file"
-msgstr "Afegeix el registre al fitxer"
-
-msgid "Authenticate using username/password"
-msgstr "Autentica utilitzant nom d'usuari/contrasenya"
-
-msgid "Automatically redirect default route"
-msgstr "Readreça automàticament la ruta per defecte"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"A sota hi ha una llista d'instàncies OpenVPN configurades i el seu estat "
-"actual"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-"Crida l'script/comanda de desactivació abans de tancar el dispositiu TUN/TAP"
-
-msgid "Certificate authority"
-msgstr "Autoritat de certificat"
-
-msgid "Change process priority"
-msgstr "Canvia la prioritat del procés"
-
-msgid "Change to directory before initialization"
-msgstr "Canvia el directori abans de la inicialització"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Comprova el certificat de peer contra un CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Chroot al directori després de la inicialització"
-
-msgid "Client is disabled"
-msgstr "El client està deshabilitat"
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr "Configura el mode client"
-
-msgid "Configure server bridge"
-msgstr "Configura el pont de servidor"
-
-msgid "Configure server mode"
-msgstr "Configura el mode servidor"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Connecta't a través un proxy Socks5"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr "Interval de reintent de connexió"
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr "Dimonitza després d'inicialitzar"
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "Retarda l'obertura tun/tap i l'execució d'script d'activació"
-
-msgid "Diffie Hellman parameters"
-msgstr "Paràmetres Diffie-Hellman"
-
-msgid "Directory for custom client config files"
-msgstr "Directori per fitxers de configuració de client personalitzats"
-
-msgid "Disable Paging"
-msgstr "Desactiva Paging"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Desactiva xifratge de vector d'inicialització"
-
-msgid "Disable options consistency check"
-msgstr "Desactiva la comprovació de consistència d'opcions"
-
-msgid "Disable replay protection"
-msgstr "Desactiva la protecció de reproducció"
-
-msgid "Do not bind to local address and port"
-msgstr "No vinculis a adreça i port locals"
-
-msgid "Don't actually execute ifconfig"
-msgstr "No executis ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "No afegeixis rutes automàticament"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "No desis a la memòria cau contrasenyes --askpass o --auth-user-pass"
-
-msgid "Don't inherit global push options"
-msgstr "No heretis les opcions globals enviades pel servidor"
-
-msgid "Don't log timestamps"
-msgstr "No registris les marques horàries"
-
-msgid "Don't re-read key on restart"
-msgstr "No rellegeixis la clau al reiniciar"
-
-msgid "Don't require client certificate"
-msgstr "No requereixis el certificat de client"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "No utilitzis compressió adaptativa LZO"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "No alertis d'inconsistències ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Escriu els paràmetres al registre"
-
-msgid "Empirically measure MTU"
-msgstr "Mesura empíricament l'MTU"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Activa motor criptogràfic OpenSSL de maquinari"
-
-msgid "Enable Path MTU discovery"
-msgstr "Activa el Path MTU discovery"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Activa el mode d'encriptació de Clau Estàtica (no-TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Activa el TLS i assumeix el rol de client"
-
-msgid "Enable TLS and assume server role"
-msgstr "Activa el TLS i assumeix el rol de servidor"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Activa la fragmentació de datagrames interna"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Activa la interfície de gestió a <em>IP</em> <em>port</em>"
-
-msgid "Enabled"
-msgstr "Activat"
-
-msgid "Encryption cipher for packets"
-msgstr "Xifra d'encriptació per paquets"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Executa comanda després d'afegir les rutes"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Executa una ordre de consola quan hi hagi un canvi d'IP remot"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Surt en fallar la negociació TLS"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Aconsegueix contrasenya PEM de controlar tty abans de dimonitzar"
-
-msgid "HMAC authentication for packets"
-msgstr "Autenticació HMAC per paquets"
-
-msgid "Handling of authentication failures"
-msgstr "Gestió de fallades d'autenticació"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr "Si la resolució del nom de màquina falla, reintenta-ho"
-
-msgid "Instance \"%s\""
-msgstr "Instància \"%s\""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr "Mantingues l'adreça IP local al reiniciar"
-
-msgid "Keep remote IP address on restart"
-msgstr "Mantingues l'adreça IP remota al reiniciar"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Mantingues el dispositiu tun/tap obert al reiniciar"
-
-msgid "Key transition window"
-msgstr "Finestra de transició de clau"
-
-msgid "Limit repeated log messages"
-msgstr "Limita els missatges de registre repetits"
-
-msgid "Local certificate"
-msgstr "Certificat local"
-
-msgid "Local host name or ip address"
-msgstr "Nom de màquina local o adreça IP"
-
-msgid "Local private key"
-msgstr "Clau privada local"
-
-msgid "Major mode"
-msgstr "Mode major"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Fes que el dispositiu tun sigui apte per IPv6"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Número màxim de paquets TCP encuats a la sortida"
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Número de memòries intermitges de broadcast assignades"
-
-msgid "Number of lines for log file history"
-msgstr "Número de línies per historial de fitxer de registre"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Accepta connexions només d'un cert nom X509"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "Processa l'excés de temps d'espera de pings remots si la ruta existeix"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Instàncies OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Optimitza les escriptures TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Sortida al syslog i no dimonitzis"
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr "Fitxer PKCS#12 contenidor de claus"
-
-msgid "Pass environment variables to script"
-msgstr "Passa les variables d'ambient a l'script"
-
-msgid "Persist replay-protection state"
-msgstr "Persisteix l'estat de protecció de reproducció"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Persisteix/deixa de persistir ifconfig-pool"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Ping remot cada n segons sobre port TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Proxy timeout in seconds"
-msgstr "Temps d'espera màxim de proxy en segons"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Envia una opció ifconfig al remot"
-
-msgid "Push options to peer"
-msgstr "Envia opcions al peer"
-
-msgid "Query management channel for private key"
-msgstr "Consulta el canal de gestió per una clau privada"
-
-msgid "Randomly choose remote server"
-msgstr "Tria aleatòriament el servidor remot"
-
-msgid "Refuse connection if no custom client config"
-msgstr "Refusa la connexió si no hi ha configuració de client personalitzada"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Remapeja senyals SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Nom de màquina remot o adreça IP"
-
-msgid "Remote ping timeout"
-msgstr "Temps d'espera màxim de ping remot"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Renegocia clau de canal de dades després de bytes"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Renegocia clau de canal de dades després de paquets"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "Renegocia clau de canal de dades després de segons"
-
-msgid "Replay protection sliding window size"
-msgstr "Mida de la finestra lliscant de protecció de reproducció"
-
-msgid "Require explicit designation on certificate"
-msgstr "Requereix una designació explícita al certificat"
-
-msgid "Require explicit key usage on certificate"
-msgstr "Requereix ús de clau explícit al certificat"
-
-msgid "Restart after remote ping timeout"
-msgstr "Reinicia després d'excedir el temps d'espera de ping remot"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Temps d'espera de retransmissió en canal de control TLS"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Reintenta indefinidament en errors de proxy HTTP"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Reintenta indefinidament en errors de proxy Socks"
-
-msgid "Route subnet to client"
-msgstr "Enruta subxarxa al client"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Executa com un servidor inetd o xinetd"
-
-msgid "Run script cmd on client connection"
-msgstr "Executa l'script en connectar-se el client"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Executa l'script en desconnectar-te el client"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Executa els scripts d'activació/desactivació per tots els reinicis."
-
-msgid "Send notification to peer on disconnect"
-msgstr "Envia notificació al peer en desconnectar-se"
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr "Estableix el GID al grup"
-
-msgid "Set TCP/UDP MTU"
-msgstr "Estableix la MTU de TCP/UDP"
-
-msgid "Set UID to user"
-msgstr "Estableix l'UID per l'usuari"
-
-msgid "Set aside a pool of subnets"
-msgstr "Deixa de banda un conjunt de subxarxes"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Estableix les opcions de proxy HTTP exteses"
-
-msgid "Set output verbosity"
-msgstr "Estableix el detall de sortida"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-"Estableix la mida de les taules de dispersió d'adreces reals i virtuals"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Estableix la mida de memòria intermèdia de recepció TCP/UDP"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Estableix la mida de memòria intermèdia d'enviament TCP/UDP"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Estableix la mida de cua TX de tun/tap"
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr "Estableix la MTU del dispositiu tun/tap"
-
-msgid "Set tun/tap device overhead"
-msgstr "Estableix la càrrega (overhead) del dispositiu tun/tap"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Estableix el límit superior al TCP MSS"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Configuració d'ample de banda d'un peer"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Ordre a executar després que s'obri un dispositiu tun"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Ordre a executar després que es tanqui un dispositiu tun"
-
-msgid "Shell command to verify X509 name"
-msgstr "Ordre de comanda per verificar el nom X509"
-
-msgid "Silence the output of replay warnings"
-msgstr "Silencia la sortida d'alertes de reproducció"
-
-msgid "Size of cipher key"
-msgstr "Mida de la clau de xifratge"
-
-msgid "Specify a default gateway for routes"
-msgstr "Especifica una passarel·la per defecte per rutes"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Inicia l'OpenVPN en un estat d'hivernació"
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr "Iniciat"
-
-msgid "Status file format version"
-msgstr "Versió de format de fitxer d'estat"
-
-msgid "Switch to advanced configuration »"
-msgstr "Canvia a configuració avançada"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Port TCP/UDP tan per local com per remot"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Port TCP/UDP per local (defecte=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Port TCP/UDP per remot (defecte=1194)"
-
-msgid "TLS cipher"
-msgstr "Xifrador TLS"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "Pas TOS (aplica només a IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Directori temporal pel fitxer de retorn per la connexió de client"
-
-msgid "Timeframe for key exchange"
-msgstr "Calendari per intercanvi de claus"
-
-msgid "Type of used device"
-msgstr "Tipus de dispositiu utilitzat"
-
-msgid "Use fast LZO compression"
-msgstr "Utilitza compressió ràpida LZO"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Utilitza adreces individuals en comptes de subxarxes /30"
-
-msgid "Use protocol"
-msgstr "Utilitza protocol"
-
-msgid "Use tun/tap device node"
-msgstr "Utilitza un node de dispositiu tun/tap"
-
-msgid "Use username as common name"
-msgstr "Utilitza el nom d'usuari com a nom comú"
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr "Escriu registre al fitxer"
-
-msgid "Write process ID to file"
-msgstr "Escriu l'ID del procés al fitxer"
-
-msgid "Write status to file every n seconds"
-msgstr "Escriu l'estat al fitxer cada n segons"
-
-msgid "no"
-msgstr "no"
-
-msgid "tun/tap device"
-msgstr "dispositiu tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr "temps d'espera màxim d'inactivitat tun/tap"
-
-msgid "yes (%i)"
-msgstr "sí (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "Canvia a configuració bàsica"
diff --git a/po/ca/p2pblock.po b/po/ca/p2pblock.po
deleted file mode 100644
index fe99a77..0000000
--- a/po/ca/p2pblock.po
+++ /dev/null
@@ -1,46 +0,0 @@
-#  default.pot
-#  generated from ./i18n/english/luasrc/i18n/default.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2011-02-14 17:43+0100\n"
-"Last-Translator: Manuel Munz <freifunk@somakoma.de>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Block Time"
-msgstr "Temps de bloqueig"
-
-msgid "Enable P2P-Block"
-msgstr "Habilita el Blocat P2P"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Protocols de capa 7"
-
-msgid "P2P-Block"
-msgstr "Blocat P2P"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"El Blocat P2P és un mecanisme de llista grisa per blocar diversos protocols "
-"peer-tp-peer per clients que no estiguin a la llista blanca."
-
-msgid "Portrange"
-msgstr "Rang de ports"
-
-msgid "Whitelisted IPs"
-msgstr "IPs a la llista blanca"
-
-msgid "seconds"
-msgstr "segons"
diff --git a/po/ca/p910nd.po b/po/ca/p910nd.po
deleted file mode 100644
index 08fd9be..0000000
--- a/po/ca/p910nd.po
+++ /dev/null
@@ -1,48 +0,0 @@
-#  p910nd.pot
-#  generated from ./applications/luci-p910nd/luasrc/i18n/p910nd.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-26 20:56+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Bidirectional mode"
-msgstr "Mode bidireccional"
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Primer has d'instal·lar els paquets de suport USB (kmod-usb-printer) o de "
-"port paral·lel (kmod-lp)"
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Servidor d'impressió"
-
-#~ msgid "port_help"
-#~ msgstr ""
-#~ "El p910nd escolta al port 910+N. Per exemple, 9100 per la primera "
-#~ "impressora (la 0)."
diff --git a/po/ca/pbx-voicemail.po b/po/ca/pbx-voicemail.po
deleted file mode 100644
index bf633a6..0000000
--- a/po/ca/pbx-voicemail.po
+++ /dev/null
@@ -1,87 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/ca/pbx.po b/po/ca/pbx.po
deleted file mode 100644
index cde9320..0000000
--- a/po/ca/pbx.po
+++ /dev/null
@@ -1,448 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/ca/polipo.po b/po/ca/polipo.po
deleted file mode 100644
index 660f572..0000000
--- a/po/ca/polipo.po
+++ /dev/null
@@ -1,297 +0,0 @@
-#  polipo.pot
-#  generated from ./applications/luci-polipo/luasrc/i18n/polipo.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-27 01:30+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr "Clients permesos"
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Se suporta autenticació HTTP bàsica. Entra el nom d'usuari i contrasenya en "
-"format usuari:contrasenya."
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr "Adreça de servidor DNS"
-
-msgid "Delete cache files time"
-msgstr "Hora d'esborrat de fitxers de memòria cau"
-
-msgid "Disk cache location"
-msgstr "Localització de la memòria cau del disc"
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Activa si la memòria cau (proxy) és compartida per múltiples usuaris."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Mida de segment del primer PMM (en bytes)"
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Quanta RAM hauria de fer servir Polipo per la seva memòria cau"
-
-msgid "In RAM cache size (in bytes)"
-msgstr "Mida de memòria cau a la RAM (en bytes)"
-
-msgid "Listen address"
-msgstr "Adreça que rep connexions"
-
-msgid "Listen port"
-msgstr "Port que rep connexions"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Localització on polipo desarà els fitxers de memòria cau permanentment. Es "
-"recomana l'ús de dispositius d'emmagatzematge extern, perquè la memòria cau "
-"pot créixer considerablement. Deixa-ho buit per desactivar la memòria cau en "
-"disc."
-
-msgid "Log file location"
-msgstr "Localització de fitxer registre"
-
-msgid "Log to syslog"
-msgstr "Registra al syslog"
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr "Memòria cau en disc"
-
-msgid "PMM segments size (in bytes)"
-msgstr "Mida de segments MMS (en bytes)"
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr "Adreça de proxy pare"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Adreça de proxy pare (en format host:port), al que Polipo readreçarà les "
-"sol·licituds."
-
-msgid "Parent proxy authentication"
-msgstr "Autenticació de proxy pare"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipo és un proxy caché web petit i ràpid."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Multiplexació Poor Man's"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"Multiplexació Poor Man's (PMM) és una tècnica que multiplexa sol·licitant "
-"una instància en segments múltiples. Intenta reduir la latència causada per "
-"la feblesa del protocol HTTP. NOTA: algunes pàgines poden no funcionar amb "
-"la PMM activada."
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr "Consulta DNS per nom de màquina"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr "Consulta DNS per IPv6"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Estableix l'adreça de servidor DNS a utilitzar, si vols que Polipo faci "
-"servir un servidor DNS diferent al del sistema."
-
-msgid "Shared cache"
-msgstr "Memòria cau compartida"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Mida del primer segment PMM. Si no es defineix, per defecte és el doble de "
-"la mida de segment MMS."
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr "Instal·lació syslog"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"La interfície a la que Polipo rebrà les connexions. Per rebre-les a a totes "
-"les interfícies, utilitza 0.0.0.0 o :: (IPv6)."
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Mida de truncatge de fitxer de memòria cau (en bytes)"
-
-msgid "Truncate cache files time"
-msgstr "Hora de truncatge de fitxers de memòria cau"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"Es recomana l'ǘs de dispositius d'emmagatzematge externs, ja que el fitxer "
-"de registre és escrit freqüentment i pot créixer considerablement."
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid ""
-#~ "To enable polipo on-disk cache cleaning (highly recommended), you should "
-#~ "add a cron job in Scheduled Tasks services that will execute /usr/sbin/"
-#~ "polipo_purge script. For example to perform disk cache cleanup every day "
-#~ "at 6:00 in the morning you should add the following line in Scheduled "
-#~ "Tasks \"0 6 * * *\\t/usr/sbin/polipo_purge\" (without quotes)."
-#~ msgstr ""
-#~ "Per activar la neteja memòria cau en disc de polipo (altament recomenat), "
-#~ "hauries d'afegir una tasca de cron al servei de Tasques Programades que "
-#~ "executaran l'script /usr/sbin/polipo_purge. Per exemple, per executar la "
-#~ "neteja de memòria cau del disc cada dia a les 6:00 del matí, hauries "
-#~ "d'afegir la següent línia a les Tasques Programades: \"0 6 * * * /usr/"
-#~ "sbin/polipo_purge\" (sense cometes)."
-
-#~ msgid ""
-#~ "Size to which cached files should be truncated. (default value: 1048576)"
-#~ msgstr ""
-#~ "Mida a la qual els fitxers de memòria cau s'haurien de truncar (valor per "
-#~ "defecte: 1048576)"
-
-#~ msgid ""
-#~ "Time after which cached files will be truncated. (default value: 4d12h)"
-#~ msgstr ""
-#~ "Hora després de la qual els fitxers de memòria cau es truncaran (valor "
-#~ "per defecte: 4d12h)."
-
-#~ msgid "Time after which cached files will be deleted. (default value: 32d)"
-#~ msgstr ""
-#~ "Hora després de la qual els fitxers de memòria s'esborraran (valor per "
-#~ "defecte: 32d)."
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-#~ "that are allowed to connect. The format is IP address or network address "
-#~ "(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-#~ msgstr ""
-#~ "Quan l'adreça d'escolta s'estableix a 0.0.0.0 o :: (IPv6), has de llistar "
-#~ "els clients que es permeten per connectar. El format és adreça IP o "
-#~ "adreça de xarxa (192.168.1.123, 192.168.1.0/24, 2001:660:116::/47 (IPv6))."
-
-#~ msgid ""
-#~ "false = Do not query IPv6; reluctantly = Query both, prefer IPv4; happily "
-#~ "= Query both, prefer IPv6; true = Query only IPv6"
-#~ msgstr ""
-#~ "fals = No consultis IPv6; a contracor = Consulta els dos, prefereix IPv4; "
-#~ "feliçment = Consulta els dos, prefereix IPv6; cert = Consulta només IPv6"
-
-#~ msgid ""
-#~ "false = Never use system DNS resolver; reluctantly = Query DNS directly, "
-#~ "if DNS server is unavailable fail to system DNS resolver; happily = Query "
-#~ "DNS directly, if host could not be found fallback to system DNS resolver; "
-#~ "true = Always use system DNS resolver"
-#~ msgstr ""
-#~ "fals = mai utilitzis resoledor DNS; a contracor = Consulta DNS "
-#~ "directament, si el servidor DNS està indisponible no utilitzis el sistema "
-#~ "resoledor de DNS; feliçment = Consulta DNS directament, si la màquina no "
-#~ "es pot trobar, vés al sistema resoledor de DNS; cert = Utilitza sistema "
-#~ "resoledor DNS sempre"
-
-#~ msgid "Port on which Polipo will listen. (default value: 8123)"
-#~ msgstr "Port al que Polipo rebrà les connexions (valor per defecte: 8123)."
-
-#~ msgid "polipo_pmm_pmmsize_desc"
-#~ msgstr ""
-#~ "Per habilitar el PMM, la mida dels segments PMM s'ha d'establir a algun "
-#~ "valor positiu."
diff --git a/po/ca/qos.po b/po/ca/qos.po
deleted file mode 100644
index 10f1a78..0000000
--- a/po/ca/qos.po
+++ /dev/null
@@ -1,128 +0,0 @@
-#  qos.pot
-#  generated from ./applications/luci-qos/luasrc/i18n/qos.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2009-07-04 19:03+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#, fuzzy
-msgid "Calculate overhead"
-msgstr "Calcula càrrega (overhead)"
-
-#, fuzzy
-msgid "Classification Rules"
-msgstr "Classificació"
-
-#, fuzzy
-msgid "Classification group"
-msgstr "Classificació"
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr "Enllaç de baixada"
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-#, fuzzy
-msgid "Half-duplex"
-msgstr "Half-duplex"
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-#, fuzzy
-msgid "Ports"
-msgstr "Prioritat"
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr "Qualitat de Servei"
-
-msgid "Service"
-msgstr ""
-
-#, fuzzy
-msgid "Source host"
-msgstr "Adreça origen"
-
-#, fuzzy
-msgid "Target"
-msgstr "Adreça destí"
-
-msgid "Uplink"
-msgstr "Enllaç de pujada"
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-#, fuzzy
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Amb QoS pots prioritzar el tràfic de xarxa seleccionat per adreces, ports o "
-"serveis."
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr "exprés"
-
-msgid "low"
-msgstr "baix"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "prioritat"
-
-msgid "qos_connbytes"
-msgstr ""
-
-#~ msgid "Prioritization"
-#~ msgstr "Priorització"
-
-#~ msgid "source network / source host"
-#~ msgstr "xarxa d'origen / màquina d'origen"
-
-#~ msgid "target network / target host"
-#~ msgstr "xarxa de destí / màquina de destí"
-
-#~ msgid "portrange"
-#~ msgstr "rang de ports"
-
-#~ msgid "Bytes sent"
-#~ msgstr "Bytes enviats"
diff --git a/po/ca/radvd.po b/po/ca/radvd.po
deleted file mode 100644
index 33e1ba8..0000000
--- a/po/ca/radvd.po
+++ /dev/null
@@ -1,368 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-21 04:05+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/ca/rrdtool.po b/po/ca/rrdtool.po
deleted file mode 100644
index 7c03aad..0000000
--- a/po/ca/rrdtool.po
+++ /dev/null
@@ -1,359 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 16:39+0200\n"
-"PO-Revision-Date: 2009-05-27 01:49+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Wireless - Relació Senyal Soroll"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Nivell de soroll"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Potència de senyal"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Wireless - Qualitat de senyal"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Qualitat de senyal"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: Temps ICMP d'anada i tornada"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Tallafocs - Paquets processats"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "Paquets/s"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Cadena \"%di\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Enllaç de xarxa - Transferència en %pi"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "Bytes/s"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Bytes (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Enllaç de xarxa - Paquets en %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "Paquets/s"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Processats (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Descartats   (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Errors    (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Enllaç de xarxa - Multicast en %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "Paquets/s"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Paquets"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Enllaç de xarxa - Col·lisions en %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "Col·lisions/s"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Col·lisions"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Enllaç de xarxa - Errors on %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "Errors/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Processos"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Processos/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Procés %pi - temps de cpu usat"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffies"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "sistema"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "usuari"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Procés %pi - threads i processos"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "Compte"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Procés %pi - errors de pàgina"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Errors de pàgina"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "errors de pàgina"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Procés %pi - mida de memòria virtual"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bytes"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "memòria virtual"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Ús al Processador #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Transferència a %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "Bytes/s"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Paquets a %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "Paquets/s"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: Connexions TCP a Port %pi"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "Connexions/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Ús de l'espai de disc a %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Bytes"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: Interrupcions"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "Temes/s"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: Càrrega de Sistema"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Càrrega"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 min"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 min"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 min"
diff --git a/po/ca/samba.po b/po/ca/samba.po
deleted file mode 100644
index 657586b..0000000
--- a/po/ca/samba.po
+++ /dev/null
@@ -1,96 +0,0 @@
-#  samba.pot
-#  generated from ./applications/luci-samba/luasrc/i18n/samba.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-27 01:51+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#, fuzzy
-msgid "Allow guests"
-msgstr "Permet convidats"
-
-#, fuzzy
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Els usuaris del sistema poden arribar als directoris d'inici via compartició "
-"de xarxa."
-
-#, fuzzy
-msgid "Allowed users"
-msgstr "Usuaris permesos"
-
-#, fuzzy
-msgid "Create mask"
-msgstr "Crea màscara"
-
-msgid "Description"
-msgstr "Descripció"
-
-#, fuzzy
-msgid "Directory mask"
-msgstr "Màscara de directori"
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nom de màquina"
-
-msgid "Mask for new directories"
-msgstr "Màscara per directoris nous"
-
-msgid "Mask for new files"
-msgstr "Màscara per fitxers nous"
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr "Comparticions de xarxa"
-
-msgid "Path"
-msgstr ""
-
-#, fuzzy
-msgid "Read-only"
-msgstr "Només lectura"
-
-msgid "Share home-directories"
-msgstr "Comparteix directoris d'inici"
-
-msgid "Shared Directories"
-msgstr "Directoris compartits"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr "Grup de treball"
-
-#~ msgid "Shared Directory"
-#~ msgstr "Directori compartit"
-
-#~ msgid "Physical Path"
-#~ msgstr "Ruta física"
-
-#~ msgid "optional"
-#~ msgstr "opcional"
diff --git a/po/ca/splash.po b/po/ca/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/ca/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/ca/statistics.po b/po/ca/statistics.po
deleted file mode 100644
index 11cac08..0000000
--- a/po/ca/statistics.po
+++ /dev/null
@@ -1,672 +0,0 @@
-#  statistics.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/statistics.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-27 11:15+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Action (target)"
-msgstr "Acció (objectiu)"
-
-msgid "Add command for reading values"
-msgstr "Afegeix ordre per llegir valors"
-
-msgid "Add matching rule"
-msgstr "Afegeix regla coincident"
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr "Afegeix ordre de notificació"
-
-msgid "Base Directory"
-msgstr "Directori base"
-
-msgid "Basic monitoring"
-msgstr "Monitoreig bàsic"
-
-msgid "CPU Plugin Configuration"
-msgstr "Configuració del connector de CPU"
-
-msgid "CSV Output"
-msgstr "Sortida CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Configuració del connector CSV"
-
-msgid "Cache collected data for"
-msgstr "Emmagatzema en memòria cau les dades recollides de"
-
-msgid "Cache flush interval"
-msgstr "Interval de neteja de memòria cau"
-
-msgid "Chain"
-msgstr "Cadena"
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Configuració Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd és un petit dimoni per recollir dades de diverses fonts a través "
-"dels connectors. En aquesta pàgina pots canviar la configuració general pel "
-"dimoni collectd."
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr "Configuració del connector DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Configuració del connector DNS"
-
-msgid "Data collection interval"
-msgstr "Interval de recol·lecció de dades"
-
-msgid "Datasets definition file"
-msgstr "Fitxer de definició de dades"
-
-msgid "Destination ip range"
-msgstr "Rang d'IP destí"
-
-msgid "Directory for collectd plugins"
-msgstr "Directori pels connectors connectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Directori per sub-configuracions"
-
-msgid "Disk Plugin Configuration"
-msgstr "Configuració del connector de disc"
-
-msgid "Disk Space Usage"
-msgstr "Ús d'espai en disc"
-
-msgid "Disk Usage"
-msgstr "Ús de disc"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Mostra l'hora"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Configuració del connector d'adreça electrònica"
-
-msgid "Email"
-msgstr "Adreça electrònica"
-
-msgid "Enable this plugin"
-msgstr "Activa aquest connector"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Configuració del connector exec"
-
-msgid "Filter class monitoring"
-msgstr "Monitoreig de classe filter"
-
-msgid "Firewall"
-msgstr "Tallafocs"
-
-msgid "Flush cache after"
-msgstr "Neteja la memòria cau després de"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "Readreçant entre adreces que reben connexions i adreces de servidors"
-
-msgid "Graphs"
-msgstr "Gràfics"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Ací pots definir ordres externes que s'iniciaran pel collectd per llegir "
-"certs valors. Els valors es llegiran des del stdout"
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Ací pots definir ordres externes que s'iniciaran pel collectd quan s'aribi a "
-"uns certs valors llindars. Els valors que condueixin a la invocació, "
-"alimentaran als programes stdin"
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Ací pots definir diversos criteris pels que es seleccionaran les regles "
-"iptables monitoritzades ."
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nom de màquina"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr "Configuració de connector IRQ"
-
-msgid "Ignore source addresses"
-msgstr "Ignora adreces origen"
-
-msgid "Incoming interface"
-msgstr "Interfície entrant"
-
-msgid "Interface Plugin Configuration"
-msgstr "Configuració de connector d'interfície"
-
-msgid "Interfaces"
-msgstr "Interfícies"
-
-msgid "Interrupts"
-msgstr "Interrupcions"
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr "Configuració del connector iptables"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr "Màquina que rep connexions"
-
-msgid "Listen port"
-msgstr "Port que rep connexions"
-
-msgid "Listener interfaces"
-msgstr "Interfícies que reben connexions"
-
-msgid "Load Plugin Configuration"
-msgstr "Configuració de connector de càrrega"
-
-msgid "Maximum allowed connections"
-msgstr "Connexions màximes permeses"
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr "Monitoritza tots els ports locals que reben connexions"
-
-msgid "Monitor devices"
-msgstr "Monitoritza dispositius"
-
-msgid "Monitor disks and partitions"
-msgstr "Monitoritza els discs i les particions"
-
-msgid "Monitor filesystem types"
-msgstr "Monitoritza els tipus de sistema de fitxers"
-
-msgid "Monitor hosts"
-msgstr "Monitoritza màquines"
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr "Monitoritza interrupcions"
-
-msgid "Monitor local ports"
-msgstr "Monitoritza els ports locals"
-
-msgid "Monitor mount points"
-msgstr "Monitoritza punts de muntatge"
-
-msgid "Monitor processes"
-msgstr "Monitoritza processos"
-
-msgid "Monitor remote ports"
-msgstr "Monitoritza els ports remots"
-
-msgid "Name of the rule"
-msgstr "Nom de la regla"
-
-msgid "Netlink"
-msgstr "Enllaç de xarxa"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Configuració de connector d'enllaç de xarxa"
-
-msgid "Network"
-msgstr "Xarxa"
-
-msgid "Network Plugin Configuration"
-msgstr "Configuració del connector de xarxa"
-
-msgid "Network plugins"
-msgstr "Connectors de xarxa"
-
-msgid "Network protocol"
-msgstr "Protocol de xarxa"
-
-msgid "Number of threads for data collection"
-msgstr "Número de fils de recol·lecció de dades"
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr "Crea només RRAs mitjans"
-
-msgid "Options"
-msgstr "Opcions"
-
-msgid "Outgoing interface"
-msgstr "Interfície sortint"
-
-msgid "Output plugins"
-msgstr "Connectors de sortida"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Configuració del connector ping"
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Processos"
-
-msgid "Processes Plugin Configuration"
-msgstr "Configuració del connector de processos"
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Processador"
-
-msgid "Qdisc monitoring"
-msgstr "Monitoreig Qdisc"
-
-msgid "RRD XFiles Factor"
-msgstr "Factor RRD XFiles"
-
-msgid "RRD heart beat interval"
-msgstr "Interval de batec de cor RRD"
-
-msgid "RRD step interval"
-msgstr "Interval de pas RRD"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Configuració del connector RRDTool"
-
-msgid "Rows per RRA"
-msgstr "Files per RRA"
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Segons"
-
-msgid "Server host"
-msgstr "Màquina servidor"
-
-msgid "Server port"
-msgstr "Port del servidor"
-
-msgid "Shaping class monitoring"
-msgstr "Monitoreig de classe shaping"
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr "Rang d'IP origen"
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr "Directori d'emmagatzematge"
-
-msgid "Storage directory for the csv files"
-msgstr "Directori d'emmagatzematge dels fitxers CSV"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-"Emmagatzema els valors de dades com a relacions en comptes de com a valors "
-"absoluts"
-
-msgid "Stored timespans"
-msgstr "Marques de temps emmagatzemades"
-
-msgid "System Load"
-msgstr "Càrrega de sistema"
-
-msgid "System plugins"
-msgstr "Connectors de sistema"
-
-msgid "TCP Connections"
-msgstr "Connexions TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Configuració de connector TCPConns"
-
-msgid "TTL for network packets"
-msgstr "TTL pels paquets de xarxa"
-
-msgid "TTL for ping packets"
-msgstr "TTL per paquets ping"
-
-msgid "Table"
-msgstr "Taula"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-"El connector de cpu recull estadístiques bàsiques sobre l'ús del processador."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"El connector CSV desa les dades recollides en format CSV per ser processades "
-"posteriorment per programes externs."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"El connector DF recull dades sobre l'ús d'espai en disc de diferents "
-"dispositius, punts de muntatge i tipus de sistema de fitxers."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"El connector de disc recull estadístiques d'ús detallades per les particions "
-"seleccionades o per tot el disc."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"El connector DNS recull estadístiques detallades sobre el tràfic DNS a les "
-"interfícies seleccionades."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"El connector d'adreça electrònica crea un socket unix que es pot utilitzar "
-"per transmetre estadístiques d'email a un dimoni collectd. Aquest connector "
-"es fa servir en conjunció amb Mail::SpamAssassin::Plugin. Plugin::Collectd "
-"també es pot utilitzar d'altres maneres."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"El connector exec inicia ordres externes per llegir valors des de o a "
-"processos externs quan s'arriba a certs valors de llindar."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"El connector d'interfície recull estadístiques de tràfic a les interfícies "
-"seleccionades."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"El connector iptables monitoritzarà les regles de tallafocs seleccionades i "
-"recollirà informacions sobre els bytes i paquests processats per regla."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"El connector IRQ monitoritzarà la taxa de qüestions per segon per cada "
-"interrupció seleccionada. Si no se selecciona cap interrupció, es "
-"monitoritzen totes les interrupcions."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-"El connector de càrrega recull estadístiques sobre la càrrega de sistema "
-"general."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"El connector d'enllaç de xarxa recull informació extensa com estadístiques "
-"de qdisc-, class- i filter- per les interfícies seleccionades."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"El connector de xarxa proporciona comunicacions basades en xarxa entre "
-"diferents instàncies de collectd. El collectd pot operar tan en mode "
-"servidor com client. En el client mode les dades recollides localment es "
-"transferiran a la instància del servidor de collectd, en el mode servidor la "
-"instància rep dades de les altres màquines."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"El connector de ping enviarà ICMP Echo Replies a les màquines seleccionades "
-"i mesurarà el temps d'anada i tornada en cada màquina."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"El connector de processor recollirà informacions com el temps de cpu, errors "
-"de pàgina i ús de memòria dels processos seleccionats."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"El connector RRDTool desa les dades recollides als fitxers de base de dades "
-"RRD, la base dels diagrames.<br /><br /><strong>Alerta: Establir els valors "
-"incorrectes comportarà un consum molt alt de memòria al directori temporal. "
-"Això pot inutilitzar el dispositiu!</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"El paquet d'estadísitiques està basat en <a href=\"http://collectd.org/index."
-"shtml\">Collectd</a> i utilitza l'eina <a href=\"http://oss.oetiker.ch/"
-"rrdtool/\">RRD</a> per renderitzar imatges de diagrama de les dades "
-"recoliildes."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"El connector TCPConns recull informació sobre les connexions TCP obertes en "
-"els ports seleccionats."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"El connector unixsock crea un socket Unix que es pot fer servir per llegir "
-"dades recollides d'una instància collectd."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Aquesta secció defineix en quines interfícies el collectd rebrà connexions "
-"entrants."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Aquesta secció defineix a quins servidors s'enviaran les dades recollides "
-"localment."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Intenta resoldre el nom de màquina (fqdn)"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "Sock Unix"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Configuració de connector Unixsock"
-
-msgid "Used PID file"
-msgstr "Fitxer PID usat"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr "Monitoreig detallat"
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr "p.e. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "p.e. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "p.e. reject-with tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "màx. 16 caràcters"
-
-msgid "reduces rrd size"
-msgstr "redueix mida RRD"
-
-msgid "seconds; multiple separated by space"
-msgstr "segons; múltiples separats per espais"
-
-msgid "server interfaces"
-msgstr "interfícies de servidor"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "El connector Wireless recull estadístiques sobre la potència del senyal "
-#~ "sense fils, el soroll i la qualitat."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Configuració del connector Wireless"
diff --git a/po/ca/tinyproxy.po b/po/ca/tinyproxy.po
deleted file mode 100644
index 61eae38..0000000
--- a/po/ca/tinyproxy.po
+++ /dev/null
@@ -1,332 +0,0 @@
-#  tinyproxy.pot
-#  generated from ./applications/luci-tinyproxy/luasrc/i18n/tinyproxy.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-27 02:12+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr "Nivell de registre"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr "Màx servidors spare"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr "Mín servidors spare"
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr "Rebutja accés"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr "Màquina destí"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy és un proxy HTTP no caché petit i ràpid"
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr "Via proxy"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
-
-#~ msgid "Allow access from"
-#~ msgstr "Permet l'accés des de"
-
-#~ msgid "Allowed headers for anonymous proxy"
-#~ msgstr "Capçaleres permeses pel proxy anònim"
-
-#~ msgid "Bind outgoing traffic to address"
-#~ msgstr "Vincula el tràfic sortint a l'adreça"
-
-#~ msgid "Ports allowed for CONNECT method"
-#~ msgstr "Ports permesos pel mètode CONNECT"
-
-#~ msgid "0 = disabled, empty = all"
-#~ msgstr "0 = desactivats, buit = tots"
-
-#~ msgid "Error document"
-#~ msgstr "Document d'error"
-
-#~ msgid "Filter list"
-#~ msgstr "Llista de filtre"
-
-#~ msgid "Case sensitive filters"
-#~ msgstr "Filtres distingint majúscules i minúscules"
-
-#~ msgid "Filter list is a whitelist"
-#~ msgstr "La llista de filtre és una llista blanca"
-
-#~ msgid "Extended regular expression filters"
-#~ msgstr "Filtres d'expressions regulars exteses"
-
-#~ msgid "Filter URLs instead of domains"
-#~ msgstr "Filtra URLs en comptes de dominis"
-
-#~ msgid "Listen on address"
-#~ msgstr "Escolta a l'adreça"
-
-#~ msgid "Logfile"
-#~ msgstr "Fitxer de registre"
-
-#~ msgid "Maximum number of clients"
-#~ msgstr "Màxim número de clients"
-
-#~ msgid "Maximum requests per thread"
-#~ msgstr "Màximes peticions per fil"
-
-#~ msgid "Spare servers to start with"
-#~ msgstr "Servidors spare amb els que començar"
-
-#~ msgid "Statistic document"
-#~ msgstr "Document estadístic"
-
-#~ msgid "Write to syslog"
-#~ msgstr "Escriu al syslog"
-
-#~ msgid "Connection Timeout"
-#~ msgstr "Temps d'espera excedit"
-
-#~ msgid "Value of Via-Header"
-#~ msgstr "Valor de Via-Header"
-
-#~ msgid "Include client IP"
-#~ msgstr "Inclou client IP"
-
-#~ msgid "Upstream Control"
-#~ msgstr "Control de pujada"
-
-#~ msgid "Type"
-#~ msgstr "Tipus"
-
-#~ msgid "Upstream Proxy"
-#~ msgstr "Proxy de pujada"
diff --git a/po/ca/transmission.po b/po/ca/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/ca/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/ca/upnp.po b/po/ca/upnp.po
deleted file mode 100644
index ad0f408..0000000
--- a/po/ca/upnp.po
+++ /dev/null
@@ -1,161 +0,0 @@
-#  upnp.pot
-#  generated from ./applications/luci-upnp/luasrc/i18n/upnp.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-27 01:53+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr "Enllaç de baixada"
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr "Activa mode segur"
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permet als clients de la xarxa local configurar automàticament el "
-"router."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Enllaç de pujada"
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid "Log output"
-#~ msgstr "Registra la sortida"
-
-#~ msgid ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
-#~ msgstr ""
-#~ "Només s'hauria d'activar l'UPnP si és absolutament necessari, ja que en "
-#~ "poden resultar alts riscos de seguretat a la teva xarxa."
diff --git a/po/ca/ushare.po b/po/ca/ushare.po
deleted file mode 100644
index 5e0918f..0000000
--- a/po/ca/ushare.po
+++ /dev/null
@@ -1,50 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2009-05-27 01:53+0200\n"
-"Last-Translator: Eduard Duran <iopahopa@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Content directories"
-msgstr "Directoris de contingut"
-
-msgid "Disable telnet console"
-msgstr "Desactiva la consola telnet"
-
-msgid "Disable webinterface"
-msgstr "Desactiva la interfície web"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "Opcions"
-
-msgid "Servername"
-msgstr "Nom de servidor"
-
-msgid "Settings"
-msgstr "Configuració"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/ca/uvc_streamer.po b/po/ca/uvc_streamer.po
deleted file mode 100644
index b88074a..0000000
--- a/po/ca/uvc_streamer.po
+++ /dev/null
@@ -1,37 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/ca/vnstat.po b/po/ca/vnstat.po
deleted file mode 100644
index 9d23778..0000000
--- a/po/ca/vnstat.po
+++ /dev/null
@@ -1,59 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-16 20:54+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/ca/voice_core.po b/po/ca/voice_core.po
deleted file mode 100644
index a866bec..0000000
--- a/po/ca/voice_core.po
+++ /dev/null
@@ -1,14 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/ca/voice_diag.po b/po/ca/voice_diag.po
deleted file mode 100644
index bf65c14..0000000
--- a/po/ca/voice_diag.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/ca/watchcat.po b/po/ca/watchcat.po
deleted file mode 100644
index 91d83b9..0000000
--- a/po/ca/watchcat.po
+++ /dev/null
@@ -1,52 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/ca/wol.po b/po/ca/wol.po
deleted file mode 100644
index 0991ff5..0000000
--- a/po/ca/wol.po
+++ /dev/null
@@ -1,48 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2010-04-19 00:29+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/ca/wshaper.po b/po/ca/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/ca/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/cs/ahcp.po b/po/cs/ahcp.po
deleted file mode 100644
index 708d25c..0000000
--- a/po/cs/ahcp.po
+++ /dev/null
@@ -1,113 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 10:21+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "AHCP Server"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP je autokonfigurační protokol pro IPv6 a dual-stack IPv6/IPv4 sítě, "
-"vytvořený pro použití vedle funkcí router discovery (Vyhledávání směrovačů "
-"pomocí ICMP zpráv) a DHCP na sítích kde je obtížné či nemožné nakonfigurovat "
-"server v každé vrstvě broadcast domény, například mobilní ad-hoc sítě."
-
-msgid "Active AHCP Leases"
-msgstr "Aktivní AHCP zapůjčení"
-
-msgid "Address"
-msgstr "Adresa"
-
-msgid "Advanced Settings"
-msgstr "Pokročilé nastavení"
-
-msgid "Age"
-msgstr "Stáří"
-
-msgid "Announced DNS servers"
-msgstr "Oznámené DNS servery"
-
-msgid "Announced NTP servers"
-msgstr "Oznámené NTP servery"
-
-msgid "Announced prefixes"
-msgstr "Oznámené předčíslí"
-
-msgid "Collecting data..."
-msgstr "Probíhá shromažďování dat..."
-
-msgid "Forwarder"
-msgstr "Přesměrování"
-
-msgid "General Setup"
-msgstr "Obecné nastavení"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 a IPv6"
-
-msgid "IPv4 only"
-msgstr "pouze IPv4"
-
-msgid "IPv6 only"
-msgstr "Pouze IPv6"
-
-msgid "Lease directory"
-msgstr "Zapůjčené adresáře"
-
-msgid "Lease validity time"
-msgstr "Doba platnosti zapujčení"
-
-msgid "Log file"
-msgstr "Soubor protokolu"
-
-msgid "Multicast address"
-msgstr "Vícesměrové adresy"
-
-msgid "Operation mode"
-msgstr "Pracovní režim"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Rodina protokolů"
-
-msgid "Served interfaces"
-msgstr "Obsluhované rozhraní"
-
-msgid "Server"
-msgstr "Servr"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Specifikuje ohlášené IPv4 a IPv6 NTP servery"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Specifikuje ohlášené IPv4 a IPv6 názvové servery"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Specifikuje ohlášené IPv4 a IPv6 sítě předpony v CIDR notaci"
-
-msgid "The AHCP Service is not running."
-msgstr "Služba AHCP neběží"
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "Služba je spuštěna AHCP s ID %s."
-
-msgid "There are no active leases."
-msgstr "Neexistují žádné aktivní pronájmutí."
-
-msgid "Unique ID file"
-msgstr "Jedinečný ID soubor"
diff --git a/po/cs/asterisk.po b/po/cs/asterisk.po
deleted file mode 100644
index e85059c..0000000
--- a/po/cs/asterisk.po
+++ /dev/null
@@ -1,10 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
diff --git a/po/cs/base.po b/po/cs/base.po
deleted file mode 100644
index 51924ef..0000000
--- a/po/cs/base.po
+++ /dev/null
@@ -1,2998 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-25 12:19+0200\n"
-"Last-Translator: sasakara <sasakara@email.cz>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d minutové okno, %d sekundový interval)"
-
-msgid "(%s available)"
-msgstr "(%s k dispozici)"
-
-msgid "(empty)"
-msgstr "(prázdný)"
-
-msgid "(no interfaces attached)"
-msgstr "(bez rozhraní připojení)"
-
-msgid "-- Additional Field --"
-msgstr "-- Další pole --"
-
-msgid "-- Please choose --"
-msgstr "-- Prosím vyberte --"
-
-msgid "-- custom --"
-msgstr "-- vlastní --"
-
-msgid "1 Minute Load:"
-msgstr "Zatížení za 1 minutu:"
-
-msgid "15 Minute Load:"
-msgstr "Zatížení za 15 minut:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz druhý kanál nad hlavním"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz druhý kanál pod hlavním"
-
-msgid "5 Minute Load:"
-msgstr "Zatížení za 5 minut:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "port dotazů <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "port serveru <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servery budou dotazovány podle "
-"pořadí resolvfile"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protokol Verze 4\">IPv4</abbr>-Adresa"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Verze 4\">IPv4</abbr>-Brána"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protokol Verze 4\">IPv4</abbr>-Maska sítě"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protokol Verze 6\">IPv6</abbr>-Adresa nebo Síť (CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protokol Verze 6\">IPv6</abbr>-Brána"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Konfigurace"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Název"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-Adresa"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"Nejvyšší počet <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> výpůjček"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"Největší povolená velikost <abbr title=\"Extension Mechanisms for Domain "
-"Name System\">EDNS0</abbr> packetů"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "Nejvyšší počet souběžných dotazů"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "Podpora AR"
-
-msgid "ARP retry threshold"
-msgstr "ARP limit opakování"
-
-msgid "ATM Bridges"
-msgstr "ATM mosty"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "Identifikátor virtuálního kanálu ATM (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "Identifikátor virtuální cesty ATM (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"Otevře ATM mosty přes uzavřené ethernetové rozhraní v AAL5 připojení jako "
-"virtuální síťová rozhraní Linuxu, které mohou být použity ve spojení s DHCP "
-"nebo PPP vytáčeného připojení od poskytovatele sítě."
-
-msgid "ATM device number"
-msgstr "číslo ATM zařízení"
-
-msgid "Accept router advertisements"
-msgstr "Přijímat oznámení směrovačů"
-
-msgid "Access Concentrator"
-msgstr "Přístupový koncentrátor"
-
-msgid "Access Point"
-msgstr "Přístupový bod"
-
-msgid "Action"
-msgstr "Akce"
-
-msgid "Actions"
-msgstr "Akce"
-
-msgid "Activate this network"
-msgstr "Aktivovat tuto síť"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Aktivní záznamy ve směrovací tabulce <abbr title=\"Internet Protocol Version "
-"4\">IPv4</abbr>"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Aktivní záznamy ve směrovací tabulce <abbr title=\"Internet Protocol Version "
-"6\">IPv6</abbr>"
-
-msgid "Active Connections"
-msgstr "Aktivní spojení"
-
-msgid "Active DHCP Leases"
-msgstr "Aktivní propůjčené DHCP adresy (leases)"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Aktivní propůjčené DHCPv6 adresy (leases)"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Přidat"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Přidat lokální koncovku k doménovým jménům ze souboru hosts"
-
-msgid "Add new interface..."
-msgstr "Přidat rozhraní..."
-
-msgid "Additional Hosts files"
-msgstr "Dodatečné Hosts soubory"
-
-msgid "Address"
-msgstr "Adresa"
-
-msgid "Address to access local relay bridge"
-msgstr "Adresa pro přístup k místnímu relay bridge"
-
-msgid "Administration"
-msgstr "Správa"
-
-msgid "Advanced Settings"
-msgstr "Rozšířená nastavení"
-
-msgid "Advertise IPv6 on network"
-msgstr "Na síti oznamovat IPv6"
-
-msgid "Advertised network ID"
-msgstr "Oznamované ID sítě"
-
-msgid "Alert"
-msgstr "Upozornění"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "Povolit <abbr title=\"Secure Shell\">SSH</abbr> autentizaci heslem"
-
-msgid "Allow all except listed"
-msgstr "Povolit vše mimo uvedené"
-
-msgid "Allow listed only"
-msgstr "Povolit pouze uvedené"
-
-msgid "Allow localhost"
-msgstr "Povolit localhost"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Povolit vzdáleným hostitelům připojování k místním portům přesměrovaným "
-"pomocí SSH "
-
-msgid "Allow root logins with password"
-msgstr "Povolit přihlašovaní root účtu pomocí hesla"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Povolit <em>root</em> účtu přihlášení bez nastaveného hesla"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr "Povolit upstream odpovědi na 127.0.0.0/8 rozsah, např. pro RBL služby"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Hodnota musí ležet v intervalu 1 až 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-"Vždy použije kanál 40 MHz , i když překrývá sekundární kanál . Tato volba "
-"není v souladu s IEEE 802.11n-2009!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Pokud není zaškrtnuto, bude vytvořena dodatečná síť"
-
-msgid "Antenna 1"
-msgstr "Anténa 1"
-
-msgid "Antenna 2"
-msgstr "Anténa 2"
-
-msgid "Antenna Configuration"
-msgstr "Konfigurace antén"
-
-msgid "Any zone"
-msgstr "Libovolná zóna"
-
-msgid "Apply"
-msgstr "Použít"
-
-msgid "Applying changes"
-msgstr "Probíhá uplatňování nastavení"
-
-msgid "Assign interfaces..."
-msgstr "Přiřadit rozhraní..."
-
-msgid "Associated Stations"
-msgstr "Připojení klienti"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11 bezdrátový ovladač."
-
-msgid "Authentication"
-msgstr "Autentizace"
-
-msgid "Authoritative"
-msgstr "Autoritativní"
-
-msgid "Authorization Required"
-msgstr "Vyžadována autorizace"
-
-msgid "Auto Refresh"
-msgstr "Automaticky obnovovat"
-
-msgid "Available"
-msgstr "Dostupné"
-
-msgid "Available packages"
-msgstr "Dostupné balíčky"
-
-msgid "Average:"
-msgstr "Průměr:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Zpět"
-
-msgid "Back to Overview"
-msgstr "Zpět k přehledu"
-
-msgid "Back to configuration"
-msgstr "Zpět ke konfiguraci"
-
-msgid "Back to overview"
-msgstr "Zpět k přehledu"
-
-msgid "Back to scan results"
-msgstr "Zpět k výsledkům vyhledávání"
-
-msgid "Background Scan"
-msgstr "Vyhledávat na pozadí"
-
-msgid "Backup / Flash Firmware"
-msgstr "Zálohovat / nahrát firmware"
-
-msgid "Backup / Restore"
-msgstr "Zálohovat / obnovit"
-
-msgid "Backup file list"
-msgstr "Seznam souborů k zálohování"
-
-msgid "Bad address specified!"
-msgstr "Zadána neplatná adresa!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Seznam souborů k zálohování lze nalézt níže. Sestává se z konfiguračních "
-"souborů označených opkg, nezbyných systémových souborů a souborů "
-"vyhovujících uživatelem určeným vzorům."
-
-msgid "Bitrate"
-msgstr "Přenosová rychlost"
-
-msgid "Bogus NX Domain Override"
-msgstr "Přepíše falešnou hodnotu NX Domény. "
-
-msgid "Bridge"
-msgstr "Síťový most"
-
-msgid "Bridge interfaces"
-msgstr "Síťové mosty"
-
-msgid "Bridge unit number"
-msgstr "Číslo síťového mostu"
-
-msgid "Bring up on boot"
-msgstr "Zapnout po startu"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Broadcom 802.11 bezdrátový ovladač."
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Broadcom modul BCM 04x 802,11 bezdrátový ovladač."
-
-msgid "Buffered"
-msgstr "Bufferováno"
-
-msgid "Buttons"
-msgstr "Tlačítka"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "Vytížení CPU (%)"
-
-msgid "Cached"
-msgstr "V cache"
-
-msgid "Cancel"
-msgstr "Storno"
-
-msgid "Chain"
-msgstr "Řetěz"
-
-msgid "Changes"
-msgstr "Změny"
-
-msgid "Changes applied."
-msgstr "Změny aplikovány."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Změní administrátorské heslo pro přístup k zařízení"
-
-msgid "Channel"
-msgstr "Kanál"
-
-msgid "Check"
-msgstr "Kontrola"
-
-msgid "Checksum"
-msgstr "Kontrolní součet"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Zóna firewallu přiřazená k tomuto rozhraní. Pro odstranění rozhraní z "
-"přiřazené zóny vyberte volbu \"<em>nespecifikovaná</em>\". Pro vytvoření "
-"nové zóny a její následné přiřazení danému rozhraní vyplňte pole "
-"\"<em>vytvořit</em>\"."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Vyberte síť (ě), které chcete připojit k tomuto bezdrátovému rozhraní nebo "
-"vyplňte <em> vytvořit </ em> pole a pojmenujte novou síť."
-
-msgid "Cipher"
-msgstr "Šifra"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Pro stažení archivu tar s aktuální konfigurací stiskněte \"Vytvořit archiv"
-"\". Pro obnovení továrního nastavení stiskněte \"Obnovit výchozí\"."
-
-msgid "Client"
-msgstr "Klient"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "Klientské ID odesílané v DHCP požadavku"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Uzavírat neaktivní spojení po daném počtu sekund. Pro vypnutí časového "
-"omezení použijte jako hodntu nulu."
-
-msgid "Close list..."
-msgstr "Zavřít seznam..."
-
-msgid "Collecting data..."
-msgstr "Probíhá sběr dat..."
-
-msgid "Command"
-msgstr "Příkaz"
-
-msgid "Common Configuration"
-msgstr "Společná nastavení"
-
-msgid "Compression"
-msgstr "Komprese"
-
-msgid "Configuration"
-msgstr "Nastavení"
-
-msgid "Configuration applied."
-msgstr "Nastavení uplatněno."
-
-msgid "Configuration files will be kept."
-msgstr "Konfigurační soubory budou zachovány."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "Použít tento přípojný bod jako překryvné úložiště pro block-extroot"
-
-msgid "Confirmation"
-msgstr "Ověření"
-
-msgid "Connect"
-msgstr "Připojit"
-
-msgid "Connected"
-msgstr "Připojeno"
-
-msgid "Connection Limit"
-msgstr "Omezení počtu připojení"
-
-msgid "Connections"
-msgstr "Připojení"
-
-msgid "Country"
-msgstr "Země"
-
-msgid "Country Code"
-msgstr "Kód země"
-
-msgid "Cover the following interface"
-msgstr "Pokrýt následující rozhraní"
-
-msgid "Cover the following interfaces"
-msgstr "Pokrýt následující rozhraní"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Vytvořit / přiřadit zónu firewallu"
-
-msgid "Create Interface"
-msgstr "Vytvořit rozhraní"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Vytvořit síťový most přes více rozhraní"
-
-msgid "Critical"
-msgstr "Kritické"
-
-msgid "Cron Log Level"
-msgstr "Úroveň protokolování Cronu"
-
-msgid "Custom Interface"
-msgstr "Vlastní rozhraní"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Upraví chování <abbr title=\"Light Emitting Diode\">LED</abbr> diod zařízení."
-
-msgid "DHCP Leases"
-msgstr "DHCP výpůjčky"
-
-msgid "DHCP Server"
-msgstr "DHCP server"
-
-msgid "DHCP and DNS"
-msgstr "DHCP a DNS"
-
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-msgid "DHCP-Options"
-msgstr "Volby DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "DHCPv6 přidělené IP."
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Přeposílání DNS"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Ladění"
-
-msgid "Default %d"
-msgstr "Výchozí %d"
-
-msgid "Default gateway"
-msgstr "Výchozí brána"
-
-msgid "Default state"
-msgstr "Výchozí stav"
-
-msgid "Define a name for this network."
-msgstr "Jméno sítě"
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Další možnosti DHCP, například \"<code> 6,192.168.2.1,192.168.2.2 </ code>\", "
-"které odkazuje na  různé DNS servery pro klienty."
-
-msgid "Delete"
-msgstr "Odstranit"
-
-msgid "Delete this interface"
-msgstr "Odstranit toto rozhraní"
-
-msgid "Delete this network"
-msgstr "Odstranit tuto síť"
-
-msgid "Description"
-msgstr "Popis"
-
-msgid "Design"
-msgstr "Vzhled"
-
-msgid "Destination"
-msgstr "Cíl"
-
-msgid "Device"
-msgstr "Zařízení"
-
-msgid "Device Configuration"
-msgstr "Nastavení zařízení"
-
-msgid "Diagnostics"
-msgstr "Diagnostika"
-
-msgid "Directory"
-msgstr "Adresář"
-
-msgid "Disable"
-msgstr "Zakázat"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Pro toto rozhraní zakázat <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>."
-
-msgid "Disable DNS setup"
-msgstr "Zakázat nastavení DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Zakázat HW-Beacon časovač"
-
-msgid "Disabled"
-msgstr "Zakázáno"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Vyřadit upstream RFC1918 odpovědi."
-
-msgid "Displaying only packages containing"
-msgstr "Zobrazeny pouze balíčky obsahující"
-
-msgid "Distance Optimization"
-msgstr "Optimalizace na vzdálenost"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Vzdálenost nejodlehlejšího člena sítě v metrech"
-
-msgid "Diversity"
-msgstr "Diverzita"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq je kombinace <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> serveru a <abbr title=\"Domain Name System\">DNS</abbr>  "
-"forwarderu pro použití v <abbr title=\"Network Address Translation\">NAT</"
-"abbr> firewallech"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "Necachovat negativní odpovědi (např. pro neexistující domény)"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Nepřeposílat požadavky, které nemohou být zodpovězeny veřejnými jmennými "
-"servery"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Nepřeposílat reverzní dotazy na místní sítě"
-
-msgid "Do not send probe responses"
-msgstr "Neodpovídat na vyhledávání "
-
-msgid "Domain required"
-msgstr "Vyžadována doména"
-
-msgid "Domain whitelist"
-msgstr "Whitelist domén"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Nepřeposílat <abbr title=\"Domain Name System\">DNS</abbr> dotazy bez <abbr "
-"title=\"Domain Name System\">DNS</abbr> jména"
-
-msgid "Download and install package"
-msgstr "Stáhnout a nainstalovat balíček"
-
-msgid "Download backup"
-msgstr "Stáhnout zálohu"
-
-msgid "Dropbear Instance"
-msgstr "Instance Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear poskytuje <abbr title=\"Secure Shell\">SSH</abbr> přístup a <abbr "
-"title=\"Secure Copy\">SCP</abbr> server"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Dynamický <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "Dynamický tunel"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Pro klienty alokovat DHCP adresy dynamicky. Pokud je volba zakázána, budou "
-"obsloužení pouze klienti se statickými výpůjčkami."
-
-msgid "EAP-Method"
-msgstr "Metoda EAP"
-
-msgid "Edit"
-msgstr "Upravit"
-
-msgid "Edit this interface"
-msgstr "Upravit toto rozhraní"
-
-msgid "Edit this network"
-msgstr "Upravit tuto síť"
-
-msgid "Emergency"
-msgstr "Záchrana"
-
-msgid "Enable"
-msgstr "Povolit"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Povolit <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Povolit dynamickou aktualizaci koncového bodu HE.net "
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Na PPP spoji povolit vyjednání IPv6 "
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Povolit průchod jumbo rámců"
-
-msgid "Enable NTP client"
-msgstr "Povolit NTP klienta"
-
-msgid "Enable TFTP server"
-msgstr "Povolit TFTP server"
-
-msgid "Enable VLAN functionality"
-msgstr "Povolit funkcionalitu VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Povolit učení se za chodu."
-
-msgid "Enable this mount"
-msgstr "Povolit tento přípojný bod"
-
-msgid "Enable this swap"
-msgstr "Povolit tento swapovací oddíl"
-
-msgid "Enable/Disable"
-msgstr "Povolit/Zakázat"
-
-msgid "Enabled"
-msgstr "Povoleno"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Na tomto síťovém mostě povolit Spanning Tree Protocol"
-
-msgid "Encapsulation mode"
-msgstr "Režim zapouzdření"
-
-msgid "Encryption"
-msgstr "Šifrování"
-
-msgid "Erasing..."
-msgstr "Odstraňování..."
-
-msgid "Error"
-msgstr "Chyba"
-
-msgid "Ethernet Adapter"
-msgstr "Ethernetový adaptér"
-
-msgid "Ethernet Switch"
-msgstr "Ethernetový switch"
-
-msgid "Expand hosts"
-msgstr "Rozšířit hostitele"
-
-msgid "Expires"
-msgstr "Vyprší"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Čas vypršení vypůjčené adresy, minimum jsou 2 minuty (<code>2m</code>)."
-
-msgid "External system log server"
-msgstr "Externí protokolovací server"
-
-msgid "External system log server port"
-msgstr "Port externího protokolovacího serveru"
-
-msgid "Fast Frames"
-msgstr "Rychlé rámce"
-
-msgid "File"
-msgstr "Soubor"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Název souboru s bootovacím obrazem oznamovaný klientům"
-
-msgid "Filesystem"
-msgstr "Souborový systém"
-
-msgid "Filter"
-msgstr "Filtr"
-
-msgid "Filter private"
-msgstr "Filtrovat soukromé"
-
-msgid "Filter useless"
-msgstr "Filtrovat nepotřebné"
-
-msgid "Find and join network"
-msgstr "Vyhledat a připojit síť"
-
-msgid "Find package"
-msgstr "Vyhledat balíček"
-
-msgid "Finish"
-msgstr "Dokončit"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr "Nastavení firewallu"
-
-msgid "Firewall Status"
-msgstr "Stav firewallu"
-
-msgid "Firmware Version"
-msgstr "Verze firmwaru"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Pevný zdrojový port pro odchozí DNS dotazy"
-
-msgid "Flags"
-msgstr "Příznaky"
-
-msgid "Flash Firmware"
-msgstr "Nahrát firmware"
-
-msgid "Flash image..."
-msgstr "Nahrát obraz..."
-
-msgid "Flash new firmware image"
-msgstr "Nahrát nový obraz s firmwarem"
-
-msgid "Flash operations"
-msgstr "Operace nad flash pamětí"
-
-msgid "Flashing..."
-msgstr "Nahrávám..."
-
-msgid "Force"
-msgstr "Vynutit"
-
-msgid "Force 40MHz mode"
-msgstr "Vynutit 40MHz mód"
-
-msgid "Force CCMP (AES)"
-msgstr "Vynutit CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Na této síti vynutit DHCP i v případě detekování jiného serveru"
-
-msgid "Force TKIP"
-msgstr "Vynutit TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Vynutit TKIP a CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Přeposílat DHCP provoz"
-
-msgid "Forward broadcast traffic"
-msgstr "Přeposílat broadcasty"
-
-msgid "Forwarding mode"
-msgstr "Režim přeposílání"
-
-msgid "Fragmentation Threshold"
-msgstr "Hranice fragmentace"
-
-msgid "Frame Bursting"
-msgstr "Dávkování rámců"
-
-msgid "Free"
-msgstr "Volné"
-
-msgid "Free space"
-msgstr "Volné místo"
-
-msgid "Frequency Hopping"
-msgstr "Kmitočtové skákání"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "Pouze GPRS"
-
-msgid "Gateway"
-msgstr "Brána"
-
-msgid "Gateway ports"
-msgstr "Porty brány"
-
-msgid "General Settings"
-msgstr "Obecná nastavení"
-
-msgid "General Setup"
-msgstr "Obecné nastavení"
-
-msgid "Generate archive"
-msgstr "Vytvorǐt archív"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Generic 802.11%s Wireless Controller"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "Heslo nezměněno z důvodu nesouhlasu nového hesla a ověření hesla!"
-
-msgid "Go to password configuration..."
-msgstr "Přejít na nastavení hesla..."
-
-msgid "Go to relevant configuration page"
-msgstr "Přejít na související konfigurační stránku"
-
-msgid "HE.net password"
-msgstr "Heslo HE.net"
-
-msgid "HE.net user ID"
-msgstr "Uživatelské ID HE.net"
-
-msgid "HT capabilities"
-msgstr "Možnosti HT"
-
-msgid "HT mode"
-msgstr "Režim HT"
-
-msgid "Handler"
-msgstr "Handler"
-
-msgid "Hang Up"
-msgstr "Zavěsit"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Nastavení základních vlastností zařízení jako je časová zóna nebo název "
-"zařízení."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Vložte veřejné klíče (na každý řadek jeden) pro ověřovaní SSH přístupu."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Hermes 802.11b bezdrátový ovladač."
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Skrývat <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Záznamy hostitelů"
-
-msgid "Host expiry timeout"
-msgstr "Vypršení časového limitu hostitele"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"<abbr title=\"Internet Protocol Address\">IP</abbr> adresa hostitele nebo síť"
-
-msgid "Hostname"
-msgstr "Jméno hostitele"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Jméno hostitele odesílané s DHCP požadavky"
-
-msgid "Hostnames"
-msgstr "Jména hostitelů"
-
-msgid "IP address"
-msgstr "IP adresy"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "IPv4 firewall"
-
-msgid "IPv4 WAN Status"
-msgstr "Stav IPv4 WAN"
-
-msgid "IPv4 address"
-msgstr "IPv4 adresa"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 a IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "IPv4 broadcast"
-
-msgid "IPv4 gateway"
-msgstr "IPv4 brána"
-
-msgid "IPv4 netmask"
-msgstr "IPv4 maska sítě"
-
-msgid "IPv4 only"
-msgstr "Pouze IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "Délka IPv4 prefixu"
-
-msgid "IPv4-Address"
-msgstr "IPv4 adresa"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "IPv6 firewall"
-
-msgid "IPv6 WAN Status"
-msgstr "Stav IPv6 WAN"
-
-msgid "IPv6 address"
-msgstr "IPv6 adresa"
-
-msgid "IPv6 gateway"
-msgstr "IPv6 brána"
-
-msgid "IPv6 only"
-msgstr "Pouze IPv6"
-
-msgid "IPv6 prefix"
-msgstr "IPv6 prefix"
-
-msgid "IPv6 prefix length"
-msgstr "Délka IPv6 prefixu"
-
-msgid "IPv6-Address"
-msgstr "IPv6 adresa"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-in-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-over-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-over-IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "Identita"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr "Namísto pevného uzlu zařízení připojovat pomocí UUID"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr "Namísto pevného uzlu zařízení připojovat pomocí názvu oddílu"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Pokud není povoleno, není nastaven žádný výchozí směrovací záznam"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr " Pokud není povoleno, oznámené adresy DNS serverů budou ignorovány"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Pokud máte nedostatek fyzické paměti, nepoužívaná data mohou bít dočasně "
-"odložena do odkládacího zařízení, což bude mít za důsledek větší množství "
-"použitelné  <abbr title=\"Random Access Memory\">RAM</abbr>. Vezměte na "
-"vědomí, že odkládání dat je velice pomalý proces, stejně jako fakt, že "
-"přístup na odkládací zařízení je řádově pomalejší, než přístup do paměti "
-"<abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Ignorovat soubory Hosts"
-
-msgid "Ignore interface"
-msgstr "Ignorovat rozhraní"
-
-msgid "Ignore resolve file"
-msgstr "Ignorovat resolv soubor"
-
-msgid "Image"
-msgstr "Obraz"
-
-msgid "In"
-msgstr "Dovnitř"
-
-msgid "Inactivity timeout"
-msgstr "Časový limit nečinnosti"
-
-msgid "Inbound:"
-msgstr "příchozí"
-
-msgid "Info"
-msgstr "Info"
-
-msgid "Initscript"
-msgstr "Initskript"
-
-msgid "Initscripts"
-msgstr "Initskripty"
-
-msgid "Install"
-msgstr "Instalovat"
-
-msgid "Install package %q"
-msgstr "Instalovat balíček %q"
-
-msgid "Install protocol extensions..."
-msgstr "Instalovat protokolové rozšíření ..."
-
-msgid "Installed packages"
-msgstr "Nainstalované balíčky"
-
-msgid "Interface"
-msgstr "Rozhraní"
-
-msgid "Interface Configuration"
-msgstr "Konfigurace rozhraní"
-
-msgid "Interface Overview"
-msgstr "Přehled rozhraní"
-
-msgid "Interface is reconnecting..."
-msgstr "Rozhraní se znovu připojuje.."
-
-msgid "Interface is shutting down..."
-msgstr "Rozhraní se vypíná..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Rozhraní není přítomné nebo je dosud nepřipojeno"
-
-msgid "Interface reconnected"
-msgstr "Rozhraní bylo znovu připojeno"
-
-msgid "Interface shut down"
-msgstr "Rozhraní bylo vypnuto"
-
-msgid "Interfaces"
-msgstr "Rozhraní"
-
-# Není co dodat.
-msgid "Internal Server Error"
-msgstr "Vnitřní chyba serveru"
-
-msgid "Invalid"
-msgstr "Neplatná vstupní hodnota"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-"Uvedené VLAN ID je neplatné! Jsou povolena pouze ID z rozsahu %d až %d."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "Uvedené VLAN ID je neplatné! Každé ID musí být jedinečné."
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Špatné uživatelské jméno a/nebo heslo! Prosím zkuste to znovu."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Zdá se, že se pokoušíte zapsat obraz, který se nevejde do flash paměti. "
-"Prosím ověřte soubor s obrazem!"
-
-msgid "Java Script required!"
-msgstr "Vyžadován JavaScript!"
-
-msgid "Join Network"
-msgstr "Připojit k síti."
-
-msgid "Join Network: Settings"
-msgstr "Připojit k síti: nastavení."
-
-msgid "Join Network: Wireless Scan"
-msgstr "Připojit k síti: Vyhledání bezdrátových sítí"
-
-msgid "Keep settings"
-msgstr "Zachovat nastavení"
-
-msgid "Kernel Log"
-msgstr "Záznam jádra"
-
-msgid "Kernel Version"
-msgstr "Verze jádra"
-
-msgid "Key"
-msgstr "Klíč"
-
-msgid "Key #%d"
-msgstr "Klíč #%d"
-
-msgid "Kill"
-msgstr "Zabít"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "L2TP Server"
-
-msgid "LCP echo failure threshold"
-msgstr "LCP echo selhání prahové hodnoty."
-
-msgid "LCP echo interval"
-msgstr "LCP interval upozornění"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Popis"
-
-msgid "Language"
-msgstr "Jazyk"
-
-msgid "Language and Style"
-msgstr "Jazyk a styl"
-
-msgid "Lease validity time"
-msgstr "Doba platnosti zápůjčky"
-
-msgid "Leasefile"
-msgstr "Soubor zájpůjček"
-
-msgid "Leasetime"
-msgstr "Doba trvání zápůjčky."
-
-msgid "Leasetime remaining"
-msgstr "Zbývající doba trvání zápůjčky."
-
-msgid "Leave empty to autodetect"
-msgstr "Ponechte prázdné pro automatickou detekci."
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Ponecháte-li prázdné, použije stávající WAN adresu."
-
-msgid "Legend:"
-msgstr "Legenda:"
-
-msgid "Limit"
-msgstr "Limit"
-
-msgid "Link On"
-msgstr "Odkaz na"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Seznam <abbr title=\"Domain Name System\">DNS</abbr> serverů, na které "
-"přeposílat požadavky"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Seznam domén, pro které povolit odpovědi podle RFC1918"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "Seznam hostitelů, kteří udávají falešné hodnoty NX domén"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-"Poslouchat pouze na daném rozhraní, nebo pokud není specifikováno, na všech"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Port pro příchozí dotazy DNS"
-
-msgid "Load"
-msgstr "Zátěž"
-
-msgid "Load Average"
-msgstr "Zátěž průměrná"
-
-msgid "Loading"
-msgstr "Načítání"
-
-msgid "Local IPv4 address"
-msgstr "Místní IPv4 adresa"
-
-msgid "Local IPv6 address"
-msgstr "Místní IPv6 adresa"
-
-msgid "Local Startup"
-msgstr "Místní startup"
-
-msgid "Local Time"
-msgstr "Místní čas"
-
-msgid "Local domain"
-msgstr "Místní doména"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Specifikace místní domény. Jména shodná s touto doménou nikdy nebudou "
-"přesměrována ani rozlušťována pomocí DHCP nebo souborů hosts"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Přípona místní domény, připojená za názvy DHCP jmen a záznamů v souboru "
-"hosts"
-
-msgid "Local server"
-msgstr "Místní server"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Lokalizovat jméno v závislosti na dotazující se podsíti, pokud bylo nalezeno "
-"více IP adres"
-
-msgid "Localise queries"
-msgstr "Lokalizační dotazy"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Uzamknout kanál %d používaný %s"
-
-msgid "Log output level"
-msgstr "Úroveň logování"
-
-msgid "Log queries"
-msgstr "Dotazy pro logování"
-
-msgid "Logging"
-msgstr "Logování"
-
-msgid "Login"
-msgstr "Přihlásit"
-
-msgid "Logout"
-msgstr "Odhlásit"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "Nejnižší zapůjčenou adresu použít jako offset síťové adresy."
-
-msgid "MAC-Address"
-msgstr "MAC-Adresa"
-
-msgid "MAC-Address Filter"
-msgstr "Filtr MAC adres"
-
-msgid "MAC-Filter"
-msgstr "Filtr MAC"
-
-msgid "MAC-List"
-msgstr "Seznam Mac"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Nejvyšší míra"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Nejvyšší povolené množství aktivních DHCP zápůjček"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Nejvyšší povolené množství souběžných DNS dotazů"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Nejvyšší povolená velikost EDNS.0 UDP paketů"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Nejvyšší počet sekund čekání, než bude modem připraven"
-
-msgid "Maximum hold time"
-msgstr "Maximální doba držení"
-
-msgid "Maximum number of leased addresses."
-msgstr "Maximální počet zapůjčených adres."
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "Paměť"
-
-msgid "Memory usage (%)"
-msgstr "Využití paměti (%)"
-
-msgid "Metric"
-msgstr "Metrika"
-
-msgid "Minimum Rate"
-msgstr "Nejnižší hodnota"
-
-msgid "Minimum hold time"
-msgstr "Minimální čas zápůjčky"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Chybějící rozšíření protokolu %q"
-
-msgid "Mode"
-msgstr "Mód"
-
-msgid "Modem device"
-msgstr "Modemové zařízení"
-
-msgid "Modem init timeout"
-msgstr "Časový limit inicializace modemu"
-
-msgid "Monitor"
-msgstr "Sledování"
-
-msgid "Mount Entry"
-msgstr "Připojit vstup"
-
-msgid "Mount Point"
-msgstr "Přípojný bod"
-
-msgid "Mount Points"
-msgstr "Přípojné body"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Přípojné body-vstupy"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Přípojné body - změna vstupu"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Přípojný bod určuje místo v souborovém systému, na kterém bude připojeno "
-"paměťové zařízení."
-
-msgid "Mount options"
-msgstr "Volby připojení"
-
-msgid "Mount point"
-msgstr "Přípojný bod"
-
-msgid "Mounted file systems"
-msgstr "Připojené souborové systémy"
-
-msgid "Move down"
-msgstr "Přesunout dolů"
-
-msgid "Move up"
-msgstr "Přesunout nahoru"
-
-msgid "Multicast Rate"
-msgstr "Hodnota vícesměrového vysílání "
-
-msgid "Multicast address"
-msgstr "Adresa vícesměrového vysílání"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "Kandidáti NTP serveru"
-
-msgid "Name"
-msgstr "Název"
-
-msgid "Name of the new interface"
-msgstr "Název nového rozhraní"
-
-msgid "Name of the new network"
-msgstr "Název nové sítě"
-
-msgid "Navigation"
-msgstr "Navigace"
-
-msgid "Netmask"
-msgstr "Síťová maska"
-
-msgid "Network"
-msgstr "Síť"
-
-msgid "Network Utilities"
-msgstr "Síťové nástroje"
-
-msgid "Network boot image"
-msgstr "Síťový bootovací obraz "
-
-msgid "Network without interfaces."
-msgstr "Síť bez rozhraní"
-
-msgid "Next »"
-msgstr "Další »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Pro toto rozhraní není nastaven žádný DHCP server."
-
-msgid "No chains in this table"
-msgstr "Žádné řetězce v této tabulce"
-
-msgid "No files found"
-msgstr "Nebyly nalezeny žádné soubory"
-
-msgid "No information available"
-msgstr "Údaje nejsou k dispozici"
-
-msgid "No negative cache"
-msgstr "Žádná negativní mezipaměť"
-
-msgid "No network configured on this device"
-msgstr "Síť není nastavena na tomto zařízení"
-
-msgid "No network name specified"
-msgstr "Neuvedeno jméno sítě"
-
-msgid "No package lists available"
-msgstr "Seznam balíčků není k dispozici"
-
-msgid "No password set!"
-msgstr "Žádné heslo!"
-
-msgid "No rules in this chain"
-msgstr "Žádná pravidla v tomto řetězci"
-
-msgid "No zone assigned"
-msgstr "Žádná zóna nepřiřazena"
-
-msgid "Noise"
-msgstr "Šum"
-
-msgid "Noise:"
-msgstr "Šum:"
-
-msgid "None"
-msgstr "Žádný"
-
-msgid "Normal"
-msgstr "Normální"
-
-msgid "Not Found"
-msgstr "Nenalezeno"
-
-msgid "Not associated"
-msgstr "Neasociováno"
-
-msgid "Not connected"
-msgstr "Nepřipojeno"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Pozn: Konfigurační soubory budou vymazány"
-
-msgid "Notice"
-msgstr "Oznámení"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Konfigurace balíčků OPKG"
-
-msgid "Off-State Delay"
-msgstr "Vypnutí prodlevy"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Na této stránce můžete nastavit síťová rozhraní. Můžete přemostit několik "
-"rozhraní zaškrtnutím pole \"přemostit rozhraní\" a zápisem názvů rozhraní, "
-"vzájemně oddělených mezerami. Také můžete použít  <abbr title=\"Virtual "
-"Local Area Network\">VLAN</abbr> zápis <samp>INTERFACE.VLANNR</samp> (<abbr "
-"title=\"například\">např.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Zapnutí prodlevy"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr "Jedno jméno nebo mac adresa, musí být zadáno!"
-
-msgid "One or more fields contain invalid values!"
-msgstr "Jedno nebo více polí obsahuje neplatné hodnoty!"
-
-msgid "One or more required fields have no value!"
-msgstr "Jedno nebo více požadovaných polí neobsahuje hodnotu!"
-
-msgid "Open list..."
-msgstr "Otevřít seznam"
-
-msgid "Option changed"
-msgstr "Volba změněna"
-
-msgid "Option removed"
-msgstr "Volba odstraněna"
-
-msgid "Options"
-msgstr "Možnosti"
-
-msgid "Other:"
-msgstr "Ostatní:"
-
-msgid "Out"
-msgstr "Ven"
-
-msgid "Outbound:"
-msgstr "Odchozí:"
-
-msgid "Outdoor Channels"
-msgstr "Venkovní kanály"
-
-msgid "Override MAC address"
-msgstr "Přepsat MAC adresu"
-
-msgid "Override MTU"
-msgstr "Přepsat MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Přepsat bránu v DHCP odpovědích"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Přepsat síťovou masku, odesílanou klientům. Obvykle je spočítána podle "
-"subsítě, která je obsluhována."
-
-msgid "Override the table used for internal routes"
-msgstr "Přepsat tabulku, používanou pro vnitřní cesty"
-
-msgid "Overview"
-msgstr "Přehled"
-
-msgid "Owner"
-msgstr "Vlastník"
-
-msgid "PAP/CHAP password"
-msgstr "Heslo PAP/CHAP"
-
-msgid "PAP/CHAP username"
-msgstr "Uživatelské jméno PAP/CHAP"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "Zapouzdření PPPoA"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "Vyžadován balíček libiwinfo!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Seznamy balíčků jsou starší než 24 hodin."
-
-msgid "Package name"
-msgstr "Název balíčku"
-
-msgid "Packets"
-msgstr "Pakety"
-
-msgid "Part of zone %q"
-msgstr "Část zóny %q"
-
-msgid "Password"
-msgstr "Heslo"
-
-msgid "Password authentication"
-msgstr "Autentizace heslem"
-
-msgid "Password of Private Key"
-msgstr "Heslo privátního klíče"
-
-msgid "Password successfully changed!"
-msgstr "Heslo bylo úspěšně změněno!"
-
-msgid "Path to CA-Certificate"
-msgstr "Cesta k certifikátu CA"
-
-msgid "Path to Client-Certificate"
-msgstr "Cesta k certifikátu klienta"
-
-msgid "Path to Private Key"
-msgstr "Cesta k privátnímu klíči"
-
-msgid "Path to executable which handles the button event"
-msgstr "Cesta ke spustitelnému souboru, který obsluhuje událost tlačítka"
-
-msgid "Peak:"
-msgstr "Špička:"
-
-msgid "Perform reboot"
-msgstr "Provést restart"
-
-msgid "Perform reset"
-msgstr "Provést reset"
-
-msgid "Phy Rate:"
-msgstr "Fyzická rychlost:"
-
-msgid "Physical Settings"
-msgstr "Fyzické nastavení"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "Paketů"
-
-msgid "Please enter your username and password."
-msgstr "Prosím vložte vaše uživatelské jméno a heslo"
-
-msgid "Please wait: Device rebooting..."
-msgstr "Prosím počkejte: Provádím reboot..."
-
-msgid "Policy"
-msgstr "Politika"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr "Port %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "Port %d je neoznačený ve více VLAN!"
-
-msgid "Port status:"
-msgstr "Stav portu:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Po takovém množství LCP echo selhání předpokládám, že peer je mrtvý. "
-"Použijte 0 pro ignorování chyb."
-
-msgid "Prevents client-to-client communication"
-msgstr "Zabraňuje komunikaci klient-klient"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Prism2/2.5/3 802.11b Wireless Controller"
-
-msgid "Proceed"
-msgstr "Pokračovat"
-
-msgid "Processes"
-msgstr "Procesů"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protokol"
-
-msgid "Protocol family"
-msgstr "Rodina protokolů"
-
-msgid "Protocol of the new interface"
-msgstr "Protokol nového rozhraní"
-
-msgid "Protocol support is not installed"
-msgstr "Podpora pro protokol není nainstalována"
-
-msgid "Provide NTP server"
-msgstr "Poskytování NTP serveru"
-
-msgid "Provide new network"
-msgstr "Poskytování nové sítě"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Kvalita"
-
-msgid "RTS/CTS Threshold"
-msgstr "Práh RTS/CTS"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "RX Rate"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "RaLink 802.11%s Wireless Controller"
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr "Výběr ověřování portů"
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Přečtěte si <code>/etc/ethers</code> ke konfiguraci <abbr title=\"Dynamic "
-"Host Configuration Protocol\">DHCP</abbr> Serveru"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Opravdu odstranit toto rozhraní? Odstranění nelze vrátit zpět!\n"
-"Můžete ztratit přístup k zařízení, pokud jste připojeni prostřednictvím "
-"tohoto rozhraní."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Opravdu odstranit bezdrátovou síť? Odstranění nelze vrátit zpět!\n"
-"Můžete ztratit přístup k zařízení, pokud jste připojeni prostřednictvím této "
-"sítě."
-
-msgid "Really reset all changes?"
-msgstr "Opravdu resetovat všechny změny?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Opravdu vypnout rozhraní \"%s\" ?\n"
-"Můžete ztratit přístup k zařízení, pokud jste připojeni prostřednictvím "
-"tohoto rozhraní."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Opravdu vypnout síť ?\n"
-"Můžete ztratit přístup k zařízení, pokud jste připojeni prostřednictvím "
-"tohoto rozhraní."
-
-msgid "Really switch protocol?"
-msgstr "Opravdu prohodit protokol?"
-
-msgid "Realtime Connections"
-msgstr "Připojení v reálném čase"
-
-msgid "Realtime Graphs"
-msgstr "Grafy v reálném čase"
-
-msgid "Realtime Load"
-msgstr "Zátěž v reálném čase"
-
-msgid "Realtime Traffic"
-msgstr "Provoz v reálném čase"
-
-msgid "Realtime Wireless"
-msgstr "Wireless v reálném čase"
-
-msgid "Rebind protection"
-msgstr "Opětovné nastavení ochrany"
-
-msgid "Reboot"
-msgstr "Reboot"
-
-msgid "Rebooting..."
-msgstr "Rebootuji..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Rebootuje operační systém vašeho zařízení"
-
-msgid "Receive"
-msgstr ""
-
-msgid "Receiver Antenna"
-msgstr "Přijímací anténa"
-
-msgid "Reconnect this interface"
-msgstr "Přepojit toto rozhraní"
-
-msgid "Reconnecting interface"
-msgstr "Přepojuji rozhraní..."
-
-msgid "References"
-msgstr "Reference"
-
-msgid "Regulatory Domain"
-msgstr ""
-
-msgid "Relay"
-msgstr "Přenos"
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr "Vzdálená IPv4 adresa"
-
-msgid "Remove"
-msgstr "Odstranit"
-
-msgid "Repeat scan"
-msgstr "Opakovat skenování"
-
-msgid "Replace entry"
-msgstr "Nahradit vstup"
-
-msgid "Replace wireless configuration"
-msgstr "Nahradit bezdrátovou konfiguraci"
-
-# .. například Listina s DocSIS 3?
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Vyžadováno u některých ISP"
-
-msgid "Reset"
-msgstr "Reset"
-
-msgid "Reset Counters"
-msgstr "Resetovat čítače"
-
-msgid "Reset to defaults"
-msgstr "Obnovit na výchozí"
-
-msgid "Resolv and Hosts Files"
-msgstr "Soubory Resolv a Hosts"
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr "Restart"
-
-msgid "Restart Firewall"
-msgstr "Restartovat firewall"
-
-msgid "Restore backup"
-msgstr "Obnovit zálohu"
-
-msgid "Reveal/hide password"
-msgstr "Odhalit/skrýt heslo"
-
-msgid "Revert"
-msgstr "Vrátit zpět"
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr "Kořenový adresář souborů, přístupných přes TFTP"
-
-msgid "Router Model"
-msgstr "Model routeru"
-
-msgid "Router Name"
-msgstr "Název routeru"
-
-msgid "Router Password"
-msgstr "Heslo routeru"
-
-msgid "Routes"
-msgstr "Trasy"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Trasy určují, přes jaké rozhraní a bránu může být konkrétního hosta dosaženo"
-
-msgid "Rule #"
-msgstr "Pravidlo #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "Spustit kontrolu souborového systému před připojením zařízení"
-
-msgid "Run filesystem check"
-msgstr "Spustit kontrolu souborového systému"
-
-msgid "SSH Access"
-msgstr "Přístup přes SSH"
-
-msgid "SSH-Keys"
-msgstr "SSH klíče"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Uložit"
-
-msgid "Save & Apply"
-msgstr "Uložit & použít"
-
-msgid "Save &#38; Apply"
-msgstr "Uložit &#38; použít"
-
-msgid "Scan"
-msgstr ""
-
-msgid "Scheduled Tasks"
-msgstr "Naplánované úlohy"
-
-msgid "Section added"
-msgstr "Přidána sekce"
-
-msgid "Section removed"
-msgstr "Sekce odebrána"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Podrobnosti viz manuálová stránka příkazu \"mount\""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr "Oddělovat klienty"
-
-msgid "Separate WDS"
-msgstr "Oddělovat WDS"
-
-msgid "Server Settings"
-msgstr "Nastavení serveru"
-
-msgid "Service Name"
-msgstr "Název služby"
-
-msgid "Service Type"
-msgstr "Typ služby"
-
-msgid "Services"
-msgstr "Služby"
-
-msgid "Setup DHCP Server"
-msgstr "Nastavit DHCP server"
-
-msgid "Setup Time Synchronization"
-msgstr "Nastavit synchronizaci času"
-
-msgid "Show current backup file list"
-msgstr "Ukázat aktuální seznam záložních souborů"
-
-msgid "Shutdown this interface"
-msgstr "Shodit toho rozhraní"
-
-msgid "Shutdown this network"
-msgstr "Shodit tuto síť"
-
-msgid "Signal"
-msgstr "Signál"
-
-msgid "Signal:"
-msgstr "Signál:"
-
-msgid "Size"
-msgstr "Velikost"
-
-msgid "Skip"
-msgstr "Přeskočit"
-
-msgid "Skip to content"
-msgstr "Skočit na obsah"
-
-msgid "Skip to navigation"
-msgstr "Skočit na navigaci"
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr "Software"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Některá pole obsahují neplatné hodnoty, nelze uložit!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Omlouváme se, ale požadovaný objekt nebyl nalezen."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Omlouváme se, na serveru došlo k neočekávané vyjímce."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"Omlouváme se, ale v tomto zařízení není přítomná podpora pro upgrade "
-"systému. Nový obraz firmwaru musí být zapsán ručně. Prosím, obraťte se na "
-"OpenWRT wiki pro zařízení specifické instalační instrukce."
-
-msgid "Sort"
-msgstr "Seřadit"
-
-msgid "Source"
-msgstr "Zdroj"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Určuje množství neúspěšných ARP požadavků, po kterém je hostitel považován "
-"za mrtvého"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr "Určuje počet sekund, po kterém je hostitel považovám za mrtvého"
-
-msgid "Specify the secret encryption key here."
-msgstr "Zde nastavte soukromý šifrovací klíč"
-
-msgid "Start"
-msgstr "Start"
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr "Statické IPv4 trasy"
-
-msgid "Static IPv6 Routes"
-msgstr "Statické IPv6 trasy"
-
-msgid "Static Leases"
-msgstr ""
-
-msgid "Static Routes"
-msgstr "Statické trasy"
-
-msgid "Static WDS"
-msgstr "Statický WDS"
-
-msgid "Static address"
-msgstr "Statická adresa"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Stav"
-
-msgid "Stop"
-msgstr "Stop"
-
-msgid "Strict order"
-msgstr ""
-
-msgid "Submit"
-msgstr ""
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr ""
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr "Synchronizovat s prohlížečem"
-
-msgid "Synchronizing..."
-msgstr "Synchronizuji.."
-
-msgid "System"
-msgstr "System"
-
-msgid "System Log"
-msgstr "Systémový log"
-
-msgid "System Properties"
-msgstr "Vlastnosti systému"
-
-msgid "System log buffer size"
-msgstr "Velikost bufferu systémového logu"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Nastavení TFTP"
-
-msgid "TFTP server root"
-msgstr "Kořenový adresář TFTP serveru"
-
-msgid "TX"
-msgstr ""
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "Target"
-msgstr "Cíl"
-
-msgid "Terminate"
-msgstr "Ukončit"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"Sekce <em>Nastavení zařízení</em> pokrývá fyzické nastavení radiového "
-"hardwaru jako kanál, vysílací výkon nebo výběr antény, které je sdíleno mezi "
-"všemi bezdrátovými sítěmi (pokud hardware podporuje multi-SSID). Nastavení "
-"konkrétní sítě jako šifrování, operační mód jsou seskupeny v sekci "
-"<em>Nastavení rozhraní</em>"
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Balíček <em>libiwinfo-lua</em> není nainstalován. Tato komponenta musí být "
-"nainstalována, aby fungovalo nastavení bezdátové sítě."
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Povolené znaky jsou: <code>A-Z</code>, <code>a-z</code>, <code>0-9</code> a "
-"<code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"Soubor zařízení paměti nebo oddílu (<abbr title=\"například\">např.</abbr> "
-"<code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Souborový systém, který byl použit pro formátování paměti (<abbr title="
-"\"například\">napři.</abbr> <samp><abbr title=\"Souborový systém "
-"Ext3\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Obraz flash byl nahrán. Prosím porovnejte níže uvedený checksum a velikost "
-"souboru s originálním souborem pro zajištění integrity dat.<br /> Kliknutím "
-"na \"Pokračovat\" spustíte proceduru flashování."
-
-msgid "The following changes have been committed"
-msgstr "Následující změny byly provedeny"
-
-msgid "The following changes have been reverted"
-msgstr "Následující změny byly vráceny"
-
-msgid "The following rules are currently active on this system."
-msgstr "Následující pravidla jsou v nyní na tomto systému aktivní."
-
-msgid "The given network name is not unique"
-msgstr "Zadané jméno sítě není jedinečné"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"Tento hardware nepodporuje multi-SSID. Pokud budete pokračovat, existující "
-"konfigurace bude nahrazena."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr "Vybraný protokol potřebuje mít přiřazeno zařízení."
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"Systém maže konfigurační oddíl, po skončení procesu bude automaticky "
-"restartován."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr "Nejsou zde žádné nevyřízené změny k aplikaci!"
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr "Nejsou zde žádné nevyřízené změny!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Zatím zde není přiřazeno zařízení, prosím připojte nějaké v záložce "
-"\"Fyzické nastavení\""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Na tomto routeru není nastaveno heslo. Prosím, nastavte heslo uživatele root "
-"tak, abyste ochránili webové rozhraní a mohli povolit SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"Toto je 32 bajtové uživatelské ID, zapsané v hex tvaru, ne přihlašovací "
-"jméno."
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Zde vidíte obsah souboru /etc/rc.local. Příkazy, které sem vložíte (před "
-"příkaz 'exit 0') budou spuštěny na konci bootovacího procesu."
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Toto je systémový crontab, v němž můžete nastavit naplánované úlohy. "
-"Podrobnosti naleznete v crontab(5)."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"V tomto seznamu vidíte přehled aktuálně běžících systémových procesů a "
-"jejich stavy."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "Na této stránce si můžete nastavit vlastní události tlačítek."
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "Tato stránka zobrazuje přehled aktivních síťových spojení."
-
-msgid "This section contains no values yet"
-msgstr "Tato sekce zatím neobsahuje žádné hodnoty"
-
-msgid "Time Synchronization"
-msgstr "Synchronizace času"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "Synchronizace času dosud není nakonfigurována."
-
-msgid "Timezone"
-msgstr "Časová zóna"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Zde můžete nahrát dříve vygenerovaný záložní archiv, pokud chcete obnovit "
-"konfigurační soubory."
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "Provoz"
-
-msgid "Transfer"
-msgstr "Přenos"
-
-msgid "Transmission Rate"
-msgstr "Vysílací rychlost"
-
-msgid "Transmit"
-msgstr ""
-
-msgid "Transmit Power"
-msgstr "Vysílací výkon"
-
-msgid "Transmitter Antenna"
-msgstr "Anténa vysílače"
-
-msgid "Trigger"
-msgstr "Spouštění"
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr "ID tunelu"
-
-msgid "Tunnel Interface"
-msgstr "Rozhraní tunelu"
-
-msgid "Turbo Mode"
-msgstr "Turbo mód"
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr ""
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "USB zařízení"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr "Neznámý"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Neznámá chyba, heslo nebylo změněno!"
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Neuložené změny"
-
-msgid "Unsupported protocol type."
-msgstr "Nepodporovaný typ protokolu"
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Nahrát obraz pro upgrade systému, jímž bude přepsán běžící firmware. "
-"Zkontrolujte \"Keep settings\" za účelem udržení aktuální konfigurace "
-"(vyžaduje obraz OpenWrt kompatabilního firmwaru)."
-
-msgid "Upload archive..."
-msgstr "Nahrát archiv"
-
-msgid "Uploaded File"
-msgstr "Nahrát soubor"
-
-msgid "Uptime"
-msgstr "Uptime"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr ""
-
-msgid "Use DHCP gateway"
-msgstr "Použít DHCP bránu"
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr "Použít MTU na rozhraní tunelu"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Použít TTL na rozhraní tunelu"
-
-msgid "Use as root filesystem"
-msgstr "Použít jako kořenový souborový systém"
-
-msgid "Use broadcast flag"
-msgstr "Použít příznak broadcastu"
-
-msgid "Use custom DNS servers"
-msgstr "Použít vlastní DNS servery"
-
-msgid "Use default gateway"
-msgstr "Použít výchozí bránu"
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr "Použít směrovací tabulku"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Použitím tlačítka <em>Přidat</em> přidáte novou \"zápůjčku\" (lease). "
-"<em>MAC adresa</em> identifikuje počítač, <em>IPv4 adresa</em> určuje, jaká "
-"pevná adresa bude použita. <em>Hostname</em> je přiřazeno jako symbolické "
-"jméno."
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Použit"
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr "Uživatelské jméno"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Rozhraní VLAN"
-
-msgid "VLANs on %q"
-msgstr "VLANy na %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLANy na %q (%s)"
-
-msgid "VPN Server"
-msgstr "VPN server"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr "Ověřit"
-
-msgid "Version"
-msgstr "Verze"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr "Sdílený klíč WEP"
-
-msgid "WEP passphrase"
-msgstr "WEP heslo"
-
-msgid "WMM Mode"
-msgstr "WMM mód"
-
-msgid "WPA passphrase"
-msgstr "WPA heslo"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"Šifrování WPA vyžaduje nainstalovaný wpa_supplicant (pro klientský režim) "
-"nebo hostapd (pro AP a ad-hoc režim)."
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr "Varování"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Varování: Existují neuložené změny, které budou rebootem ztraceny!"
-
-msgid "Wifi"
-msgstr "WiFi"
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr "Bezdrátový adaptér"
-
-msgid "Wireless Network"
-msgstr "Bezdrátová síť"
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr "Bezdrátová síť je zakázána"
-
-msgid "Wireless network is enabled"
-msgstr "Bezdrátová síť je povolena"
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr "Zapisovat přijaté požadavky DNS do systemového logu"
-
-msgid "XR Support"
-msgstr "Podpora XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Zde můžete povolit nebo zakázat init skripty. Změny se projeví po restartu "
-"zařízení.<br /><strong>Varování: Pokud zakážete základní init skripty jako "
-"\"network\", vaše zařízení se může stát nepřístupným!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Aby LuCI fungoval správně, musíte mít v prohlížeči povolený Javascript."
-
-msgid "any"
-msgstr "libovolný"
-
-msgid "auto"
-msgstr ""
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr "přemostěný"
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "vytvoří most přes vybraná rozhraní"
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "zakázat"
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"Soubor, ve kterém budou uloženy zadané <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr> výpůjčky (leases)."
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "pomoc"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr ""
-
-msgid "input"
-msgstr "vstup"
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "místní <abbr title=\"Domain Name System\">DNS</abbr> soubor"
-
-msgid "no"
-msgstr "ne"
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "žádný"
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr "označený"
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr "neomezený"
-
-msgid "unspecified"
-msgstr "nespecifikovaný"
-
-msgid "unspecified -or- create:"
-msgstr "nespecifikovaný -nebo- vytvořit:"
-
-msgid "untagged"
-msgstr "neoznačený"
-
-msgid "yes"
-msgstr "ano"
-
-msgid "« Back"
-msgstr "« Zpět"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Čekám na router.."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Povolit zabudovaný NTP server"
-
-#~ msgid "Active Leases"
-#~ msgstr "Aktivní výpůjčky"
-
-#~ msgid "Open"
-#~ msgstr "Otevřít"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Přenosová rychlost"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Nastavení / Použít"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Nastavení / Změny"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Nastavení / Zrušit změny"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC adresa"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Šifrováno\">Šifr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scanování"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Síť přiřazená k tomuto bezdrátovému rozhraní. Pro nepřiřazování rozhraní "
-#~ "k žádné síti vyberte volbu \"<em>nespecifikovaná</em>\". Pro vytvoření "
-#~ "nové sítě vyplňte pole \"<em>vytvořit</em>\"."
-
-#~ msgid "Create Network"
-#~ msgstr "Vytvořit síť"
-
-#~ msgid "Networks"
-#~ msgstr "Sítě"
-
-#~ msgid "Power"
-#~ msgstr "Výkon"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Wifi sítě v místním prostředí"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-notace : "
-#~ "adresa/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr ""
-#~ "<abbr title=\"Internet Protokol Verze 4\">IPv4</abbr>-Všesměrové vysílání"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protokol Verze 6\">IPv6</abbr>-Adresa"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Nastavení IPv6"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Pozn: Pokud zde zvolíte rozhraní, které již je součástí jiné sítě, bude "
-#~ "přesunuto do této sítě."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Síťové porty na vašem routeru mohou být kombinovány do několika <abbr "
-#~ "title=\"Virtual Local Area Network\">VLAN</abbr>, ve kterých mohou "
-#~ "počítače navzájem komunikovat přímo. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr> jsou často používány za účelem oddělení různých "
-#~ "síťových segmentů. Často je zde jeden Uplink port, sloužící pro připojení "
-#~ "do větší sítě (třeba Internetu) a ostatní porty jsou využity pro místní "
-#~ "síť."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Povolit bufferování"
diff --git a/po/cs/commands.po b/po/cs/commands.po
deleted file mode 100644
index 849d4ff..0000000
--- a/po/cs/commands.po
+++ /dev/null
@@ -1,94 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 10:42+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr "Popis"
-
-msgid "Download"
-msgstr "Stáhnout"
-
-msgid "Failed to execute command!"
-msgstr "Chyba při zpracování příkazu!"
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr "Nahrávám"
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/cs/coovachilli.po b/po/cs/coovachilli.po
deleted file mode 100644
index 0dc5fc0..0000000
--- a/po/cs/coovachilli.po
+++ /dev/null
@@ -1,348 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-30 10:33+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Nastavení sítě"
-
-msgid "RADIUS configuration"
-msgstr "Nastavení RADIUS"
-
-msgid "UAM and MAC Authentication"
-msgstr "UAM a MAC ověřování"
-
-#~ msgid "General configuration"
-#~ msgstr "Obecná konfigurace"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Obecné nastavení CoovaChilli"
-
-#~ msgid "Command socket"
-#~ msgstr "Příkazový socket"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "UNIX socket, používaný pro komunikaci s chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Interval obnovení konfigurace"
-
-#~ msgid "Pid file"
-#~ msgstr "PID soubor"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "Nastavení TUN/TAP"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Nastavení sítě/Tun"
-
-#~ msgid "Network down script"
-#~ msgstr "Network down skript"
-
-#~ msgid "Network up script"
-#~ msgstr "Network up skript"
-
-#~ msgid "Script executed after the tun network interface has been brought up"
-#~ msgstr "Skript, spuštěný po nahození síťového rozhraní TUN"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Primární DNS server"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Sekundární DNS server"
-
-#~ msgid "Domain name"
-#~ msgstr "Doménové jméno"
-
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Pool dynamických IP adres"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Urči rozsah, z něhož se budou přidělovat dynamické IP adresy"
-
-#~ msgid "IP down script"
-#~ msgstr "IP down skript"
-
-#~ msgid "IP up script"
-#~ msgstr "IP up skript"
-
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr "Síťová adresa uplink rozhraní (CIDR notace)"
-
-#~ msgid "Static IP address pool"
-#~ msgstr "Pool statických IP adres"
-
-#~ msgid "Specifies a pool of static IP addresses"
-#~ msgstr "Určuje rozsah, z něhož se budou přidělovat statické IP adresy"
-
-#~ msgid "TX queue length"
-#~ msgstr "Délka odchozí fronty"
-
-#~ msgid "The TX queue length to set on the TUN/TAP interface"
-#~ msgstr "Délka odchozí fronty na zařízení TUN/TAP"
-
-#~ msgid "Use TAP device"
-#~ msgstr "Použít zařízení TAP"
-
-#~ msgid "Use the TAP interface instead of TUN"
-#~ msgstr "Použít TAP rozhraní namísto TUN"
-
-#~ msgid "DHCP configuration"
-#~ msgstr "Nastavení DHCP"
-
-#~ msgid "Set DHCP options for connecting clients"
-#~ msgstr "Nastavit možnosti DHCP pro příchozí klienty"
-
-#~ msgid "DHCP end number"
-#~ msgstr "DHCP koncové číslo"
-
-#~ msgid "Where to stop assigning IP addresses (default 254)"
-#~ msgstr "Kde přestat přidělovat IP adresy (standardně 254)"
-
-#~ msgid "DHCP interface"
-#~ msgstr "DHCP rozhraní"
-
-#~ msgid "Where to start assigning IP addresses (default 10)"
-#~ msgstr "Odkud začít přidělovat IP adresy"
-
-#~ msgid "Enable IEEE 802.1x"
-#~ msgstr "Povolit IEEE 802.1x"
-
-#~ msgid "Enable IEEE 802.1x authentication and listen for EAP requests"
-#~ msgstr "Povolit IEEE 802.1x autentizaci a naslouchat požadavkům EAP"
-
-#~ msgid "Admin password"
-#~ msgstr "Administrátorské heslo"
-
-#~ msgid "Admin user"
-#~ msgstr "Administrátorský uživatel"
-
-#~ msgid "Do not check disconnection requests"
-#~ msgstr "Neověřovat požadavky na odpojení"
-
-#~ msgid "Do not check the source IP address of radius disconnect requests"
-#~ msgstr ""
-#~ "Neověřovat zdrojovou IP adresu požadavku na odpojení protokolu RADIUS"
-
-#~ msgid "NAS IP"
-#~ msgstr "NAS IP"
-
-#~ msgid "NAS MAC"
-#~ msgstr "NAS MAC"
-
-#~ msgid "Allow OpenID authentication"
-#~ msgstr "Povolit autentizaci pomocí OpenID"
-
-#~ msgid "RADIUS server 1"
-#~ msgstr "RADIUS server 1"
-
-#~ msgid "The IP address of radius server 1"
-#~ msgstr "IP adresa prvního radius serveru"
-
-#~ msgid "RADIUS server 2"
-#~ msgstr "RADIUS server 2"
-
-#~ msgid "The IP address of radius server 2"
-#~ msgstr "IP adresa druhého radius serveru"
-
-#~ msgid ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
-#~ "to RADIUS attribtues"
-#~ msgstr ""
-#~ "Prohodit významy spojení \"vstupní oktety\" a \"výstupní oktety\", "
-#~ "vztahující se k atributům protokolu RADIUS"
-
-#~ msgid "Allow WPA guests"
-#~ msgstr "Povolit WPA hosty"
-
-#~ msgid "Proxy client"
-#~ msgstr "Proxy klient"
-
-#~ msgid ""
-#~ "IP address from which radius requests are accepted. If omitted the server "
-#~ "will not accept radius requests"
-#~ msgstr ""
-#~ "IP adresa, ze které budou přijímány požadavky radius. Pokud necháte "
-#~ "prázdné, server nebude přijímat požadavky protokolu RADIUS."
-
-#~ msgid "Proxy listen address"
-#~ msgstr "Naslouchající adresa Proxy"
-
-#~ msgid "Local interface IP address to use for accepting radius requests"
-#~ msgstr ""
-#~ "IP adresa místního rozhraní, určená pro naslouchání požadavkům protokolu "
-#~ "RADIUS"
-
-#~ msgid "Proxy port"
-#~ msgstr "Port Proxy"
-
-#~ msgid "UDP Port to listen to for accepting radius requests"
-#~ msgstr "UDP port, určený pro naslouchání požadavkům protokolu RADIUS"
-
-#~ msgid "UAM configuration"
-#~ msgstr "Konfigurace UAM"
-
-#~ msgid "Unified Configuration Method settings"
-#~ msgstr "Nastavení 'Unified Configuration Method'"
-
-#~ msgid "Use Chilli XML"
-#~ msgstr "Použít Chilli XML"
-
-#~ msgid "Default idle timeout"
-#~ msgstr "Výchozí časový limit nečinnosti"
-
-#~ msgid "Default idle timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Výchozí časový limit nečinnosti, pokud nebyl nastaven pomocí RADIUS "
-#~ "(standardně 0)"
-
-#~ msgid "Default session timeout"
-#~ msgstr "Výchozí časový limit sezení"
-
-#~ msgid ""
-#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Výchozí časový limit sezení, pokud není RADIUS nastaven jinak (standardně "
-#~ "0)"
-
-#~ msgid "Inspect DNS traffic"
-#~ msgstr "Kontrolovat DNS provoz"
-
-#~ msgid "Local users file"
-#~ msgstr "Soubor s místními uživateli"
-
-#~ msgid ""
-#~ "A colon seperated file containing usernames and passwords of locally "
-#~ "authenticated users"
-#~ msgstr ""
-#~ "Soubor, obsahující uživatelská jména a hesla místně ověřovaných "
-#~ "uživatelů. Jednotlivé položky jsou odděleny dvojtečkou."
-
-#~ msgid "Location name"
-#~ msgstr "Název umístění"
-
-#~ msgid "Human readable location name used in JSON interface"
-#~ msgstr "Čitelný název umístění, používán v rozhraní JSON"
-
-#~ msgid "Do not redirect to UAM server"
-#~ msgstr "Nepřesměrovávat na UAM server"
-
-#~ msgid ""
-#~ "Do not return to UAM server on login success, just redirect to original "
-#~ "URL"
-#~ msgstr ""
-#~ "Při úspěšném přihlášení nevracet na UAM server, pouze přesměrovat na "
-#~ "původní URL"
-
-#~ msgid "Do not do WISPr"
-#~ msgstr "Neprovádět WISPr"
-
-#~ msgid "Allowed resources"
-#~ msgstr "Povolené zdroje"
-
-#~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr "Seznam zdrojů, jež může klient využívat bez nutnosti autentizace"
-
-#~ msgid "Allow any DNS server"
-#~ msgstr "Povolit libovolný DNS server"
-
-#~ msgid "Allow any DNS server for unauthenticated clients"
-#~ msgstr "Povolí libovolný DNS server neověřeným klientům"
-
-#~ msgid "Allow any IP address"
-#~ msgstr "Povolit libovolnou IP adresu"
-
-#~ msgid "Allowed domains"
-#~ msgstr "Povolené domény"
-
-#~ msgid "UAM homepage"
-#~ msgstr "Domovská stránka UAM"
-
-#~ msgid "URL of homepage to redirect unauthenticated users to"
-#~ msgstr ""
-#~ "URL domovské stránky, na kterou budou přesměrováni neověření uživatelé"
-
-#~ msgid "IP address to listen to for authentication of clients"
-#~ msgstr "IP adresa, na které naslouchat za účelem ověřování klientů"
-
-#~ msgid "UAM logout IP"
-#~ msgstr "Odhlašovací IP UAM"
-
-#~ msgid ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults "
-#~ "to 1.1.1.1)"
-#~ msgstr ""
-#~ "Adresa, sloužící k okamžitému odhlášení klienta, pokud na ní přistoupí "
-#~ "(standardně 1.1.1.1)"
-
-#~ msgid "UAM listening port"
-#~ msgstr "Naslouchající port UAM"
-
-#~ msgid "UAM server"
-#~ msgstr "UAM server"
-
-#~ msgid "URL of web server to use for authenticating clients"
-#~ msgstr "URL web serveru, sloužícího k ověřování klientů"
-
-#~ msgid "UAM user interface"
-#~ msgstr "Uživatelské rozhraní UAM"
-
-#~ msgid "Use status file"
-#~ msgstr "Použít stavový soubor"
-
-#~ msgid ""
-#~ "Write the status of clients in a non-volatile state file (experimental)"
-#~ msgstr ""
-#~ "Zapisovat stavy klientů do stálého stavového souboru (experimentální)"
-
-#~ msgid "WISPr login url"
-#~ msgstr "Přihlašovací URL WISPr"
-
-#~ msgid "CGI program"
-#~ msgstr "CGI program"
-
-#~ msgid "Web content directory"
-#~ msgstr "Adresář s webovým obsahem"
-
-#~ msgid "Directory where embedded local web content is placed"
-#~ msgstr "Adresář, ve kterém je umístěn místní webový obsah."
-
-#~ msgid "MAC configuration"
-#~ msgstr "Nastavení MAC"
-
-#~ msgid "Configure MAC authentication"
-#~ msgstr "Nastavit ověřování pomocí MAC"
-
-#~ msgid "Allowed MAC addresses"
-#~ msgstr "Povolené MAC adresy"
-
-#~ msgid "List of MAC addresses for which MAC authentication will be performed"
-#~ msgstr "Seznam MAC adres, pro které bude prováděno ověřování pomocí MAC"
-
-#~ msgid "Authenticate locally allowed MACs"
-#~ msgstr "Ověřit lokálně povolené MAC"
-
-#~ msgid "Authenticate allowed MAC addresses without the use of RADIUS"
-#~ msgstr "Ověří povolené MAC adresy bez použití protokolu RADIUS"
-
-#~ msgid "Enable MAC authentification"
-#~ msgstr "Povolit ověřování pomocí MAC"
-
-#~ msgid "Password"
-#~ msgstr "Heslo"
-
-#~ msgid "Suffix"
-#~ msgstr "Přípona"
diff --git a/po/cs/ddns.po b/po/cs/ddns.po
deleted file mode 100644
index ba1c9ec..0000000
--- a/po/cs/ddns.po
+++ /dev/null
@@ -1,89 +0,0 @@
-# Generated from applications/luci-ddns/luasrc/model/cbi/ddns/ddns.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2010-04-02 13:44+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Check for changed IP every"
-msgstr "Zkontrolovat změnu IP každých"
-
-msgid "Check-time unit"
-msgstr ""
-
-msgid "Custom update-URL"
-msgstr ""
-
-msgid "Dynamic DNS"
-msgstr "Dynamické DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-
-msgid "Enable"
-msgstr "Povolit"
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "Vynutit aktualizaci každých"
-
-msgid "Force-time unit"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Interface"
-msgstr "Rozhraní"
-
-msgid "Network"
-msgstr "Síť"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr "Heslo"
-
-msgid "Service"
-msgstr "Služba"
-
-msgid "Source of IP address"
-msgstr ""
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Uživatelské jméno"
-
-msgid "custom"
-msgstr "vlastní"
-
-# Hours
-# Hodin
-msgid "h"
-msgstr "h"
-
-msgid "interface"
-msgstr "rozhraní"
-
-# Minutes (not minimum)
-# Minut
-msgid "min"
-msgstr "min"
-
-msgid "network"
-msgstr ""
diff --git a/po/cs/diag_core.po b/po/cs/diag_core.po
deleted file mode 100644
index 18b7f6e..0000000
--- a/po/cs/diag_core.po
+++ /dev/null
@@ -1,35 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 10:46+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr "Diagnostika"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"V tomto menu můžete nastavit síťovou diagnostiku, jako je skenování síťových "
-"zařízení a ping testů."
diff --git a/po/cs/diag_devinfo.po b/po/cs/diag_devinfo.po
deleted file mode 100644
index 8846061..0000000
--- a/po/cs/diag_devinfo.po
+++ /dev/null
@@ -1,205 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr "Přidat"
-
-msgid "Beginning of MAC address range"
-msgstr "Začátek rozsahu MAC adres"
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr "Konfigurace"
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr "Odstranit"
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr "Zařízení na síti"
-
-msgid "Edit"
-msgstr "Upravit"
-
-msgid "Enable"
-msgstr "Povolit"
-
-msgid "End of MAC address range"
-msgstr "Konec rozsahu MAC adres"
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr "IP adresa"
-
-msgid "Interface"
-msgstr "Rozhraní"
-
-msgid "Invalid"
-msgstr "Neplatný"
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "MAC adresa"
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Jak dlouho spát mezi požadavky (milisekundy, výchozí 100)"
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr "Jméno"
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr "Žádná zařízení SIP"
-
-msgid "No devices detected"
-msgstr "Nebyla detekována žádná zařízení"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Kolikrát odeslat požadavek (standardně 1)"
-
-msgid "OUI Owner"
-msgstr "Vlastník OUI"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr "Informace o telefonu"
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr "Telefony"
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr "Počet opakování"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr "Informace o zařízení SIP"
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr "Zařízení SIP na síti"
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr "Hledat zařízení na zadané síti"
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr "Uspat mezi jednotlivými požadavky"
-
-msgid "Subnet"
-msgstr "Podsíť"
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr "Časový limit"
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr "zkontrolovat ostatní sítě"
diff --git a/po/cs/ffwizard.po b/po/cs/ffwizard.po
deleted file mode 100644
index 6ed3d5d..0000000
--- a/po/cs/ffwizard.po
+++ /dev/null
@@ -1,162 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Povolit přenášení anonymních statistik o tomto uzlu."
-
-msgid "Channel"
-msgstr "Kanál"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr "Nastavit síť"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr "Propojit váš uzel s jinými pomocí tunelu skrz internet."
-
-msgid "DHCP IP range"
-msgstr "Rozsah IP adres DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP bude klientům automaticky přidělovat IP adresy"
-
-msgid "DNS Server"
-msgstr "DNS server"
-
-msgid "Enable DHCP"
-msgstr "Povolit DHCP"
-
-msgid "Gateway"
-msgstr "Brána"
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr "IP adresa"
-
-msgid "L2gvpn tunnel"
-msgstr "L2gvpn tunel"
-
-msgid "Limit download bandwidth"
-msgstr "Omezit šířku pásma pro stahování"
-
-msgid "Limit upload bandwidth"
-msgstr "Omezit šířku pásma pro nahrávání"
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr "Heslo"
-
-msgid "Password confirmation"
-msgstr "Potvrdit heslo"
-
-msgid "Password successfully changed"
-msgstr "Heslo bylo úspěšně změněno"
-
-msgid "Protect LAN"
-msgstr "Ochránit LAN"
-
-msgid "Protocol"
-msgstr "Protokol"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Zaškrtněte toto pole, pokud chcete nastavit vaše síťová rozhraní"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Zaškrtnutím povolíte ostatním využití vašeho rozhraní pro přístup k "
-"internetu."
-
-msgid "Share your internet connection"
-msgstr "Sdílet připojení k internetu"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "IPv6 adresy jsou počítány automaticky."
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr "Nastaví nové virtuální bezdrátové rozhraní v režimu Access Pointu"
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Tento průvodce vám pomůže s nastavením vašeho routeru pro Freifunk nebo "
-"podobnou komunitní bezdrátovou síť."
-
-msgid "Unknown Error"
-msgstr "Neznámá chyba"
-
-msgid "Username"
-msgstr "Uživatelské jméno"
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr "Průvodce"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr "DHCP"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr "Nastavit toto rozhraní."
-
-msgid "recommended"
-msgstr "doporučené"
-
-msgid "Basic settings"
-msgstr "Základní nastavení"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Základní nastavení není kompletní. Prosím pokračujte"
-
-msgid "Error"
-msgstr "Chyba"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr "Nemůžete použít průvodce, protože chybí některé nezbytné hodnoty."
-
-msgid "and fill out all required fields."
-msgstr "a vyplňte všechna požadovaná pole."
diff --git a/po/cs/firewall.po b/po/cs/firewall.po
deleted file mode 100644
index 84cc5db..0000000
--- a/po/cs/firewall.po
+++ /dev/null
@@ -1,575 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 22:47+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr "%s v %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s s %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s v %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(Nepojmenovaný vstup)"
-
-msgid "(Unnamed Rule)"
-msgstr "(Nepojmenované pravidlo)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(Nepojmenovaný SNAT)"
-
-msgid "-- Please choose --"
-msgstr "-- Prosím zvolte --"
-
-msgid "-- custom --"
-msgstr "-- vlastní --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> paketů za <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr "<var>%d</var> paketů za <var>%s</var>, burst <var>%d</var> paketů."
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> a omezit na %s"
-
-msgid "Action"
-msgstr "Akce"
-
-msgid "Add"
-msgstr "Přidat"
-
-msgid "Add and edit..."
-msgstr "Přidat a upravit"
-
-msgid "Advanced Settings"
-msgstr "Pokročilé nastavení"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Povolit přesměrování ze <em>zdrojových oblastí</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Povolit přesměrování do <em>zdrojových oblastí</em>:"
-
-msgid "Any"
-msgstr "Libovolné"
-
-msgid "Covered networks"
-msgstr "Pokryté sítě"
-
-msgid "Custom Rules"
-msgstr "Vlastní pravidla"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Vlastní pravidla vám umožňují spustit libovolné iptables příkazy, které "
-"nejsou jinak pokryté frameworkem firewallu. Příkazy jsou spuštěny po každém "
-"restartu firewallu, právě po načtení výchozí sady pravidel."
-
-msgid "Destination IP address"
-msgstr "Cílová IP adresa"
-
-msgid "Destination address"
-msgstr "Cílová adresa"
-
-msgid "Destination port"
-msgstr "Cílový port"
-
-msgid "Destination zone"
-msgstr "Cílová oblast"
-
-msgid "Do not rewrite"
-msgstr "Nepřepisovat"
-
-msgid "Drop invalid packets"
-msgstr "Zahazovat neplatné pakety"
-
-msgid "Enable"
-msgstr "Povolit"
-
-msgid "Enable NAT Loopback"
-msgstr "Povolit NAT Loopback"
-
-msgid "Enable SYN-flood protection"
-msgstr "Povolit ochranu proti SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr "Povolit logování v této oblasti"
-
-msgid "External IP address"
-msgstr "Vnější IP adresa"
-
-msgid "External port"
-msgstr "Vnější port"
-
-msgid "External zone"
-msgstr "Vnější zóna"
-
-msgid "Extra arguments"
-msgstr "Dodatečné argumenty"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall - Custom Rules"
-msgstr "Firewall - Vlastní pravidla"
-
-msgid "Firewall - Port Forwards"
-msgstr "Firewall - Přesměrování portů"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Firewall - Pravidla síťového provozu"
-
-msgid "Firewall - Zone Settings"
-msgstr "Firewall - Nastavení zón"
-
-msgid "Force connection tracking"
-msgstr "Vynutit sledování připojení"
-
-msgid "Forward"
-msgstr "Přesměrování"
-
-msgid "Forward to"
-msgstr "Přesměrovat na"
-
-msgid "From %s in %s"
-msgstr "Z %s v %s"
-
-msgid "From %s in %s with source %s"
-msgstr "Z %s v %s se zdrojovou %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "Z %s v %s se zdrojovou %s a %s"
-
-msgid "General Settings"
-msgstr "Obecné nastavení"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 a IPv6"
-
-msgid "IPv4 only"
-msgstr "pouze IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "pouze IPv6"
-
-msgid "Input"
-msgstr "Vstup"
-
-# nebo mimo zóny?
-msgid "Inter-Zone Forwarding"
-msgstr "Přesměrování mezi zónami"
-
-msgid "Internal IP address"
-msgstr "Vnitřní IP adresa"
-
-msgid "Internal port"
-msgstr "Vnitřní port"
-
-msgid "Internal zone"
-msgstr "Vnitřní zóna"
-
-msgid "Limit log messages"
-msgstr "Omezit logovací zprávy"
-
-msgid "MSS clamping"
-msgstr "MSS clamping"
-
-msgid "Masquerading"
-msgstr "Maškárádování"
-
-msgid "Match"
-msgstr "Shoda"
-
-msgid "Match ICMP type"
-msgstr "Odpovídá ICMP typu"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr "Vybrat provoz, přesměrovaný na zadaný port nebo rozsah portů"
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Vybrat příchozí provoz, směrovaný na zadaný cílový port nebo rozsah portů "
-"tohoto hostitele"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Vybrat příchozí provoz, pocházející ze zadaného portu nebo rozsahu portů "
-"klienta."
-
-msgid "Name"
-msgstr "Název"
-
-msgid "New SNAT rule"
-msgstr "Nové pravidlo SNAT"
-
-msgid "New forward rule"
-msgstr "Nové přesměrovací pravidlo"
-
-msgid "New input rule"
-msgstr "Nové vstupní pravidlo"
-
-msgid "New port forward"
-msgstr "Nové přesměrování portu"
-
-msgid "New source NAT"
-msgstr "Nový zdrojový NAT (SNAT)"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "Vybrat pouze příchozí provoz, směrovaný na danou IP adresu."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Vybrat pouze příchozí provoz z těchto MAC adres."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr "Vybrat pouze příchozí provoz z této IP nebo rozsahu IP adres."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Vybrat pouze příchozí provoz, pocházející ze zadaného portu nebo rozsahu "
-"portů klienta."
-
-msgid "Open ports on router"
-msgstr "Otevřené porty na routeru"
-
-msgid "Other..."
-msgstr "Ostatní ..."
-
-msgid "Output"
-msgstr "Výstup"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr "Předává další argumenty iptables. Používat opatrně!"
-
-msgid "Port Forwards"
-msgstr "Přesměrování portů"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"Přesměrování portů (port forwarding) umožňuje vzdáleným počítačům z "
-"Internetu připojení k vybraným počítačům nebo službám uvnitř privátní sítě "
-"LAN."
-
-msgid "Protocol"
-msgstr "Protokol"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Přesměrovat vybraný příchozí provoz na uvedený port vnitřního hostitele."
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Přesměrovat vybraný příchozí provoz na uvedeného vnitřního hostitele."
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Omezit maškarádování na uvedené cílové podsítě"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Omezit maškarádování na uvedené zdrojové podsítě"
-
-msgid "Restrict to address family"
-msgstr "Omezit na rodinu adres"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "Přepsat shodný provoz na uvedenou adresu."
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Přepsat shodný provoz na uvedený zdrojový port. Může zůstat prázdné, pak "
-"bude přepsána pouze IP adresa."
-
-msgid "Rewrite to source %s"
-msgstr "Přepsat na zdrojovou %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "Přepsat na zdrojovou %s, %s"
-
-msgid "SNAT IP address"
-msgstr "IP adresa SNATu"
-
-msgid "SNAT port"
-msgstr "Port SNATu"
-
-msgid "Source IP address"
-msgstr "Zdrojová IP adresa"
-
-msgid "Source MAC address"
-msgstr "Zdrojová MAC adresa"
-
-msgid "Source NAT"
-msgstr "Zdrojový NAT"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"Zdrojový NAT je specifická forma maškarádování, která umožňuje jemnozrnnou "
-"kontrolu nad zdrojovými IP, použitými pro odchozí provoz. Využívá se "
-"například pro mapování množství WAN adres do vnitřních podsítí."
-
-msgid "Source address"
-msgstr "Zdrojová adresa"
-
-msgid "Source port"
-msgstr "Zdrojový port"
-
-msgid "Source zone"
-msgstr "Zdrojová zóna"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"Firewall vytváří zóny přes vaše síťová rozhraní za účelem řízení síťového "
-"provozu."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"Níže uvedené možnosti řídí přesměrovací politiky mezi touto zónou (%s) a "
-"ostatními zónami. <em>Cílové zóny</em> pokrývají přesměrovávaný provoz, "
-"<strong>pocházející z %q</strong>. <em>Zdrojové zóny</em> porovnávají "
-"přesměrovávaný provoz z ostatních zón, <strong>zaměřený na %q</strong>. "
-"Přesměrovávací pravidlo je <em>jednosměrné</em>, například přesměrování z "
-"lan do wan <em>nepovoluje</em> přesměrování z wan do lan (a naopak)."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"Tato stránka vám umožňuje změnit pokročilé vlastností přesměrování portů. Ve "
-"většině případů není potřeba upravovat tato nastavení."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"Tato stránka vám umožňuje změnit pokročilé vlastnosti pravidla síťového "
-"provozu, například zdrojové a cílové hostitele."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Tato sekce definuje běžné možnosti %q. <em>Vstupní</em> a <em>výstupní</em> "
-"možnosti nastavují výchozí politiky pro provoz, vstupující do této zóny a "
-"vystupující z ní, zatímco <em>přesměrovací</em> možnosti popisují politiku "
-"pro přesměrování provozu mezi rozdílnými sítěmi uvnitř jedné zóny.<em> "
-"Pokryté sítě</em> určuje, které z dostupných sítí jsou členy této zóny."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "Na %s v %s na <var>tomto zařízení</var>"
-
-msgid "To %s in %s"
-msgstr "Na %s v %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "Na %s na <var>tomto zařízení</var>"
-
-msgid "To %s, %s in %s"
-msgstr "Na %s, %s v %s"
-
-msgid "To source IP"
-msgstr "Na zdrojovou IP"
-
-msgid "To source port"
-msgstr "Na zdrojový port"
-
-msgid "Traffic Rules"
-msgstr "Pravidla síťového provozu"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"Pravidla síťového provozu definují politiky pro cestování paketů mezi "
-"různými zónami, například pro odmítnutí provozu mezi jistými hostiteli nebo "
-"pro otevření WAN portů na routeru."
-
-msgid "Via %s"
-msgstr "Prostřednictvím %s"
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Lze určit více protokolů. Vyberte \"-- vlastní --\" a vkládejte protokoly "
-"oddělené mezerou."
-
-msgid "Zone %q"
-msgstr "Zóna %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Zóna => Přesměrování"
-
-msgid "Zones"
-msgstr "Zóny"
-
-msgid "accept"
-msgstr "přijmout"
-
-msgid "any"
-msgstr "libovolný"
-
-msgid "any host"
-msgstr "libovolný hostitel"
-
-msgid "any router IP"
-msgstr "libovolná IP routeru"
-
-msgid "any zone"
-msgstr "libovolná zóna"
-
-msgid "don't track"
-msgstr "nesledovat"
-
-msgid "drop"
-msgstr "zahodit"
-
-msgid "reject"
-msgstr "odmítnout"
-
-#~ msgid "Destination"
-#~ msgstr "Cíl"
-
-#~ msgid "Family"
-#~ msgstr "Rodina"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "Přesměrovat na %s v %s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "Přesměrovat na %s, %s v %s"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Zdroj"
-
-#~ msgid "To %s"
-#~ msgstr "Na %s"
-
-#~ msgid "To %s at %s"
-#~ msgstr "Na %s v %s"
-
-#~ msgid "Via"
-#~ msgstr "přes"
-
-#~ msgid "Accept forward"
-#~ msgstr "Přijmout přesměrování"
-
-#~ msgid "Accept input"
-#~ msgstr "Přijmout vstup"
-
-#~ msgid "Disable"
-#~ msgstr "Zakázat"
-
-#~ msgid "Discard forward"
-#~ msgstr "Zahodit přesměrování"
-
-#~ msgid "Discard input"
-#~ msgstr "Zahodit vstup"
-
-#~ msgid "Do not track forward"
-#~ msgstr "Nesledovat přesměrování"
-
-#~ msgid "Do not track input"
-#~ msgstr "Nesledovat vstup"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "IP rozsah"
-
-#~ msgid "IPs"
-#~ msgstr "IP"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MACs"
-#~ msgstr "MAC"
-
-#~ msgid "Refuse forward"
-#~ msgstr "Odmítnout přesměrování"
-
-#~ msgid "Refuse input"
-#~ msgstr "Odmítnout vstup"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "Pravidlo je zakázané"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "Pravidlo je povolené"
-
-#~ msgid "day"
-#~ msgstr "den"
-
-#~ msgid "hour"
-#~ msgstr "hodina"
-
-#~ msgid "minute"
-#~ msgstr "minuta"
-
-#~ msgid "not"
-#~ msgstr "ne"
-
-#~ msgid "port"
-#~ msgstr "port"
-
-#~ msgid "ports"
-#~ msgstr "porty"
-
-#~ msgid "second"
-#~ msgstr "sekunda"
-
-#~ msgid "type"
-#~ msgstr "typ"
-
-#~ msgid "types"
-#~ msgstr "typy"
diff --git a/po/cs/freifunk-policyrouting.po b/po/cs/freifunk-policyrouting.po
deleted file mode 100644
index d0fd884..0000000
--- a/po/cs/freifunk-policyrouting.po
+++ /dev/null
@@ -1,49 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr "Zóny firewallu"
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/cs/freifunk.po b/po/cs/freifunk.po
deleted file mode 100644
index 867d501..0000000
--- a/po/cs/freifunk.po
+++ /dev/null
@@ -1,397 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-30 22:25+0200\n"
-"Last-Translator: h0nzZik <jenda.tusil@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr "Základní nastavení"
-
-msgid "Basic settings"
-msgstr "Základní nastavení"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Základní nastavení není kompletní. Prosím přejděte na"
-
-msgid "Basic system settings"
-msgstr "Základní nastavení systému"
-
-msgid "Bitrate"
-msgstr "Datový tok"
-
-msgid "Channel"
-msgstr "Kanál"
-
-#, fuzzy
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-"Zkontrolovat dostupnost nové verze firmwaru a provést automatické "
-"aktualizace."
-
-msgid "Client network size"
-msgstr "Velikost klientské sítě"
-
-msgid "Community"
-msgstr "Komunita"
-
-msgid "Community profile"
-msgstr "Komunitní profil"
-
-msgid "Community settings"
-msgstr "Nastavení komunity"
-
-#, fuzzy
-msgid "Confirm Upgrade"
-msgstr "Potvrďte upgrade"
-
-msgid "Contact"
-msgstr "Kontakt"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr "Kontaktní informace není kompletní. Prosím pokračujte na"
-
-msgid "Coordinates"
-msgstr "Souřadnice"
-
-msgid "Country code"
-msgstr "Kód země"
-
-msgid "Default routes"
-msgstr "Výchozí trasy"
-
-#, fuzzy
-msgid "Disable default content"
-msgstr "Zakázat výchozí obsah"
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr "E-Mail"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr "Chyba"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "Najděte své souřadnice pomocí OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "Freifunk"
-
-msgid "Freifunk Overview"
-msgstr "Freifunk - Přehled"
-
-msgid "Freifunk Remote Update"
-msgstr "Freifunk - Vzdálené aktualizace"
-
-msgid "Gateway"
-msgstr "Brána"
-
-msgid "Go to"
-msgstr "Jít na"
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Dobrý den, vítejte v síti"
-
-msgid "Hide OpenStreetMap"
-msgstr "Skrýt OpenStreetMap"
-
-msgid "Homepage"
-msgstr "Domovská stránka"
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr "Pokud se zajímáte o náš projekt, kontaktujte místní komunitu"
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr "Rozhraní"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"Přístup k Internetu závisí na technických a organizačních podmínkách. Může "
-"(ale nemusí) vám fungovat."
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr "Uchovat nastavení"
-
-msgid "Latitude"
-msgstr "Zeměpisná šířka"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Místní čas"
-
-msgid "Location"
-msgstr "Umístění"
-
-msgid "Longitude"
-msgstr "Zeměpisná délka"
-
-msgid "Map"
-msgstr "Mapa"
-
-msgid "Map Error"
-msgstr "Chyba mapy"
-
-msgid "Memory"
-msgstr "Paměť"
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr "Režim"
-
-msgid "Network"
-msgstr "Síť"
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr "Přezdívka"
-
-msgid "No default routes known."
-msgstr "Nejsou známy výchozí cesty"
-
-msgid "Notice"
-msgstr "Upozornění"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr "Operátor"
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr "Přehled"
-
-msgid "Package libiwinfo required!"
-msgstr "Balíček libiwinfo je vyžadován!"
-
-msgid "Phone"
-msgstr "Telefon"
-
-msgid "Please fill in your contact details below."
-msgstr "Prosím níže vyplňte kontaktní detaily."
-
-msgid "Please set your contact information"
-msgstr "Prosím nastavte si vaše kontaktní informace"
-
-msgid "Power"
-msgstr "Výkon"
-
-msgid "Processor"
-msgstr "Procesor"
-
-msgid "Profile"
-msgstr "Profil"
-
-msgid "Profile (Expert)"
-msgstr "Profil (Expert)"
-
-msgid "Realname"
-msgstr "Skutečné jméno"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-"Kliknutím na mapu vyberte vaše umístění. Mapa se zobrazí, pouze pokud jste "
-"připojen do sítě Internet."
-
-msgid "Show OpenStreetMap"
-msgstr "Zobrazit OpenStreetMap"
-
-msgid "Show on map"
-msgstr "Zobrazit na mapě"
-
-msgid "Signal"
-msgstr "Signál"
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr "Statistiky"
-
-msgid "Status"
-msgstr "Stav"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr "Systém"
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/cs/hd_idle.po b/po/cs/hd_idle.po
deleted file mode 100644
index f8dba9b..0000000
--- a/po/cs/hd_idle.po
+++ /dev/null
@@ -1,50 +0,0 @@
-# Generated from applications/luci-hd-idle/luasrc/model/cbi/hd_idle.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2013-01-29 15:37+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "Disk"
-
-msgid "Enable"
-msgstr "Povolit"
-
-msgid "Enable debug"
-msgstr "Povolit ladění"
-
-msgid "Idle-time"
-msgstr "Čas nečinnosti"
-
-msgid "Idle-time unit"
-msgstr ""
-
-msgid "Settings"
-msgstr "Nastavení"
-
-# Hodin
-msgid "h"
-msgstr "h"
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-
-# Minut (ne minimum)
-msgid "min"
-msgstr "min"
diff --git a/po/cs/meshwizard.po b/po/cs/meshwizard.po
deleted file mode 100644
index 3bc6e1f..0000000
--- a/po/cs/meshwizard.po
+++ /dev/null
@@ -1,122 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 15:41+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "Kanál"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr "Nastavit toto rozhraní"
-
-msgid "DHCP IP range"
-msgstr "DHCP IP rozsah"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr "Povolit DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr "Povoleno"
-
-msgid "General Settings"
-msgstr "Hlavní nastavení"
-
-msgid "IPv6 Settings"
-msgstr "Nastavení IPv6"
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Rozhraní"
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr "Sdílet vaše internetové připojení"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr "doporučeno"
diff --git a/po/cs/minidlna.po b/po/cs/minidlna.po
deleted file mode 100644
index f0d2563..0000000
--- a/po/cs/minidlna.po
+++ /dev/null
@@ -1,167 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 15:49+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Rozšířené nastavení"
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Hlavní nastavení"
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr "Obrázky"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr "Port:"
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr "Video"
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/cs/mmc_over_gpio.po b/po/cs/mmc_over_gpio.po
deleted file mode 100644
index 14750a6..0000000
--- a/po/cs/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-24 14:46+0200\n"
-"Last-Translator: awm1 <awm1klimes8vladimir@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "Nastavení"
diff --git a/po/cs/multiwan.po b/po/cs/multiwan.po
deleted file mode 100644
index d175246..0000000
--- a/po/cs/multiwan.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/cs/ntpc.po b/po/cs/ntpc.po
deleted file mode 100644
index 57e605e..0000000
--- a/po/cs/ntpc.po
+++ /dev/null
@@ -1,55 +0,0 @@
-# Generated from applications/luci-ntpc/luasrc/model/cbi/ntpc/*.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-08-26 22:14+0200\n"
-"Last-Translator: jhenner <jhenner@redhat.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "Úprava času"
-
-msgid "Count of time measurements"
-msgstr "Počet měření času"
-
-msgid "Current system time"
-msgstr "Aktuální systémový čas"
-
-msgid "General"
-msgstr "Obecné nastavení"
-
-msgid "Hostname"
-msgstr "Adresa time serveru"
-
-msgid "Offset frequency"
-msgstr "Offsetová frekvence (chyba měření času)"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "Synchronizuje systémový čas s přesným reálným časem přes síť"
-
-msgid "Time Server"
-msgstr "Synchronizační server"
-
-msgid "Time Servers"
-msgstr "Synchronizační servery"
-
-msgid "Time Synchronisation"
-msgstr "Synchronizace času"
-
-msgid "Update interval (in seconds)"
-msgstr "Interval obnovy synchronizace (v sekundách)"
-
-msgid "empty = infinite"
-msgstr "prázdný = neustálé opakování"
diff --git a/po/cs/olsr.po b/po/cs/olsr.po
deleted file mode 100644
index 89e0baa..0000000
--- a/po/cs/olsr.po
+++ /dev/null
@@ -1,575 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/cs/openvpn.po b/po/cs/openvpn.po
deleted file mode 100644
index 07d2502..0000000
--- a/po/cs/openvpn.po
+++ /dev/null
@@ -1,549 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-30 14:29+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr "Přijmout nastavení, přijatá ze serveru"
-
-msgid "Add"
-msgstr "Přidat"
-
-msgid "Add route after establishing connection"
-msgstr "Přidat trasu po navázání spojení"
-
-msgid "Additional authentication over TLS"
-msgstr "Dodatečné ověření přes TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Povolit provoz typu klient-klient"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Povolit více klientů se stejným certifikátem"
-
-msgid "Allow only one session"
-msgstr "Povolit pouze jedno sezení"
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr "Maximální povolené množství připojených klientů"
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr "Maximální povolené množství nových připojení"
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr "Ověřit prostřednictvím uživatelského jména / hesla"
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr "Certifikační autorita"
-
-msgid "Change process priority"
-msgstr "Změnit prioritu procesu"
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr "Adresář s uživatelskými konfiguračními soubory"
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol"
-msgstr "Protokol"
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr "Služba"
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr "Start/Stop"
-
-msgid "Started"
-msgstr "Spuštěno"
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/cs/p2pblock.po b/po/cs/p2pblock.po
deleted file mode 100644
index 19a09a3..0000000
--- a/po/cs/p2pblock.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-30 10:31+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Block Time"
-msgstr "Doba blokování"
-
-msgid "Enable P2P-Block"
-msgstr "Povolení P2P-Block"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Layer7-Protokoly"
-
-msgid "P2P-Block"
-msgstr "P2P-Block"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr "Rozsah portů"
-
-msgid "Whitelisted IPs"
-msgstr "Povolené IP adresy"
-
-msgid "seconds"
-msgstr "vteřin"
diff --git a/po/cs/p910nd.po b/po/cs/p910nd.po
deleted file mode 100644
index 60a874f..0000000
--- a/po/cs/p910nd.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Bidirectional mode"
-msgstr "Obousměrný režim"
-
-msgid "Device"
-msgstr "Zařízení"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Nejprve je nutno nainstalovat balíčky přinášející podporu USB (kmod-usb-"
-"printer) či paralelního portu (kmod-lp)."
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Settings"
-msgstr "Nastavení"
-
-msgid "TCP listener port."
-msgstr "Naslouchající TCP port"
-
-msgid "enable"
-msgstr "Povolit"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - tiskový server"
-
-#~ msgid "port_help"
-#~ msgstr "Nápověda pro výběr portu"
diff --git a/po/cs/pbx-voicemail.po b/po/cs/pbx-voicemail.po
deleted file mode 100644
index 465d404..0000000
--- a/po/cs/pbx-voicemail.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 16:32+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr "SMTP heslo"
-
-msgid "SMTP Port Number"
-msgstr "SMTP číslo portu"
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr "SMTP uživatelské jméno"
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/cs/pbx.po b/po/cs/pbx.po
deleted file mode 100644
index cde9320..0000000
--- a/po/cs/pbx.po
+++ /dev/null
@@ -1,448 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/cs/polipo.po b/po/cs/polipo.po
deleted file mode 100644
index 88eeb3f..0000000
--- a/po/cs/polipo.po
+++ /dev/null
@@ -1,201 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr "Pokročilá nastavení"
-
-msgid "Allowed clients"
-msgstr "Povolení klienti"
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/cs/qos.po b/po/cs/qos.po
deleted file mode 100644
index 18c0b89..0000000
--- a/po/cs/qos.po
+++ /dev/null
@@ -1,110 +0,0 @@
-# Generated from applications/luci-qos/luasrc/model/cbi/qos/qos.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-07-06 13:07+0200\n"
-"Last-Translator: vojtom <mvojto@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr ""
-"Snažit se zabránit zahlcení linky snížením jejího maximálního povoleného "
-"zatížení síťovým provozem"
-
-msgid "Classification Rules"
-msgstr "Klasifikační pravidla"
-
-msgid "Classification group"
-msgstr "Klasifikační skupina"
-
-msgid "Destination host"
-msgstr "Cílová adresa"
-
-msgid "Downlink"
-msgstr "Stahování"
-
-msgid "Download speed (kbit/s)"
-msgstr "Rychlost stahování dat (kbit/s)"
-
-msgid "Enable"
-msgstr "Povolit"
-
-msgid "Half-duplex"
-msgstr "Poloviční duplex"
-
-msgid "Interfaces"
-msgstr "Síťová rozhraní"
-
-msgid "Internet Connection"
-msgstr "Připojení k internetu"
-
-msgid "Number of bytes"
-msgstr "Počet bytů"
-
-msgid "Ports"
-msgstr "Porty"
-
-msgid "Protocol"
-msgstr "Protokol"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "Quality of Service"
-
-msgid "Service"
-msgstr "Služba"
-
-msgid "Source host"
-msgstr "Zdrojová adresa"
-
-msgid "Target"
-msgstr "Cílová třída priority"
-
-msgid "Uplink"
-msgstr "Odesílání"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Rychlost odesílání dat (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Pomocí služby \"<abbr title=\"Quality of Service\">QoS</abbr>\" můžete "
-"nastavit prioritu síťového provozu na základě specifikace adres, portů či "
-"služeb."
-
-msgid "all"
-msgstr "vše"
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr "výchozí"
-
-msgid "express"
-msgstr "nejvyšší priorita (velké rámce)"
-
-msgid "low"
-msgstr "nízká priorita"
-
-msgid "normal"
-msgstr "normální priorita"
-
-msgid "priority"
-msgstr "nejvyšší priorita (malé rámce)"
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/cs/radvd.po b/po/cs/radvd.po
deleted file mode 100644
index b10ae9e..0000000
--- a/po/cs/radvd.po
+++ /dev/null
@@ -1,389 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-26 22:49+0200\n"
-"Last-Translator: jhenner <jhenner@redhat.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "6to4 interface"
-msgstr "6to4 rozhraní"
-
-msgid "Address"
-msgstr "Adresa"
-
-#, fuzzy
-msgid "Addresses"
-msgstr "Adresy"
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr "Oznamovat adresu routeru"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Oznamované doménové přípony"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"Oznamované IPv6 RDNSS. Pokud prázdné, bude použita stávající IPv6 adresa "
-"rozhraní."
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Oznamované IPv6 prefixy"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Oznamované IPv6 prefixy. Pokud prázdné, bude použit stávající prefix na "
-"rozhraní."
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-"Oznamovaná doba za kterou by sousední stroje měly být dosažitelné. 0 znamená "
-"neoznamovat."
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-"Oznamovaný výchozí počet hopů pro odchozí unicast pakety. 0 vypne oznamování "
-"počtu hopů."
-
-msgid "Advertises the default router preference"
-msgstr "Oznamovaný preferovaný router."
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr "Oznamovat MTU linky. 0 vypne oznamování MTU."
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-"Oznamovaný počet sekund po kterých adresa generovaná z prefixu bezestavové "
-"konfigurace zůstává preferovaná."
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-"Oznamovaný počet sekund po kterou je prefix validní pro potřeby zjištění "
-"stavu on-link/off-link."
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-"Oznamovaný počet sekund k vypršení platnosti preference routeru. 0 zančí že "
-"není žádný router preferován."
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-"Oznamovaný počet sekund k vypršení nabízení služeb Mobile IPv6 Home Agenta"
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-"Oznamovaný počet milisekund mezi Neighbor Solicitation zprávamy. 0 vypne "
-"oznamování."
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr "Autonomní"
-
-msgid "Clients"
-msgstr "Klienti"
-
-msgid "Configuration flag"
-msgstr "Konfigurační volba"
-
-msgid "Current hop limit"
-msgstr "Aktuální limit počtu hopů"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "Konfigurace DNSSL"
-
-msgid "Default lifetime"
-msgstr "Výchozí časový limit"
-
-msgid "Default preference"
-msgstr "Výchozí preference"
-
-msgid "Enable"
-msgstr "Zapnout"
-
-msgid "Enable advertisements"
-msgstr "Zapnout oznamování"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "Zapne oznamování routeru a hledání sousedů"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-"Zapne přídavný stavový administrovaný autokonfigurační protokol (RFC2462)"
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr "Zapne autokonfiguraci přídavného, neadresních informací (RFC2462)"
-
-msgid "General"
-msgstr "Obecné"
-
-msgid "Home Agent information"
-msgstr "Informace Home Agenta"
-
-msgid "Home Agent lifetime"
-msgstr "Časový limit Home Agenta"
-
-msgid "Home Agent preference"
-msgstr "Preferovaný Home Agent"
-
-msgid "Include Home Agent Information in the RA"
-msgstr "Zahrnout informace o Home Agentovi v oznámeních"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/cs/rrdtool.po b/po/cs/rrdtool.po
deleted file mode 100644
index 9a75cdf..0000000
--- a/po/cs/rrdtool.po
+++ /dev/null
@@ -1,355 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ASCII\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/cs/samba.po b/po/cs/samba.po
deleted file mode 100644
index c7879a1..0000000
--- a/po/cs/samba.po
+++ /dev/null
@@ -1,83 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 22:04+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow guests"
-msgstr "Povolení hosté"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Povoluje systémovým uživatelům přístup do jejich domácích adresářů skrze "
-"sdílení přes síť."
-
-msgid "Allowed users"
-msgstr "Povolení uživatelé"
-
-msgid "Create mask"
-msgstr "Vytvořit masku"
-
-msgid "Description"
-msgstr "Popis"
-
-msgid "Directory mask"
-msgstr "Maska adresáře"
-
-msgid "Edit Template"
-msgstr "Editovat šablonu"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-"Editovat šablonu, která je použita pro generování konfiguračního souboru pro "
-"sambu."
-
-msgid "General Settings"
-msgstr "Obecná nastavení"
-
-msgid "Hostname"
-msgstr "Název počítače."
-
-msgid "Mask for new directories"
-msgstr "Maska pro nové adresáře"
-
-msgid "Mask for new files"
-msgstr "Maska pro nové soubory"
-
-msgid "Name"
-msgstr "Jméno"
-
-msgid "Network Shares"
-msgstr "Síťová sdílení"
-
-msgid "Path"
-msgstr "Cesta"
-
-msgid "Read-only"
-msgstr "Pouze pro čtení"
-
-msgid "Share home-directories"
-msgstr "Sdílet domácí adresáře"
-
-msgid "Shared Directories"
-msgstr "Sdílené adresáře"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Toto je obsah souboru \"/etc/samba/smb.conf.template\", ze kterého je "
-"konfigurace samby generována. Hodnoty uzavřené rourou (\"|\"), by se neměly "
-"měnit. Tyto hodnoty jsou brány ze záložky \"Obecná nastavení\"."
-
-msgid "Workgroup"
-msgstr "Skupina"
diff --git a/po/cs/splash.po b/po/cs/splash.po
deleted file mode 100644
index 2720c04..0000000
--- a/po/cs/splash.po
+++ /dev/null
@@ -1,339 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Accept"
-msgstr "Přijmout"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-"Přístup k Internetu může být možný, nicméně pouze proto, že někteří "
-"aktivisté tohoto projektu sdílí jejich soukromé Internetové připojení. "
-"Těchto několik spojení je sdíleno mezi všemi uživateli. Z toho plyne, že "
-"dostupná šířka pásma je omezená a z tohoto důvodu vás žádáme, abyste "
-"nedělali žádné z následujících věcí:"
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "Aktivní klienti"
-
-msgid "Allowed hosts/subnets"
-msgstr "Povolení hostitelé/podsítě"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"Limit šířky pásma pro klienty je aktivován pouze v případě, že oba limity "
-"(upload a download) jsou nastaveny. Hodnotou 0 úplně vypnete toto omezení. "
-"Klienti na whitelistu nejsou omezeni."
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-"Staňte se aktivním členem této komunity a přispějte provozováním vlastního "
-"uzlu"
-
-msgid "Blacklist"
-msgstr "Blacklist"
-
-msgid "Blocked"
-msgstr "Zablokovaný"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr "Client-Splash"
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr "Rychlost stahování je pro klienty omezena na tuto hodnotu (kbyte/s)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr "Rychlost nahrávání je pro klienty omezena na tuto hodnotu (kbyte/s)"
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr "Odmítnout"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr "Darováním peněz nám pomůžete udržet tento projekt naživu"
-
-msgid "Download limit"
-msgstr "Limit stahování"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr "IP adresa"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Rozhraní"
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-"KB/s (Stahování/Nahrávání). Aktivním přispíváním tomuto projektu můžete moci "
-"odebrat tento limit."
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "MAC adresa"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "MAC adresy v tomto seznamu jsou blokovány"
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-"Mac adresy klientů na whitelistu. Tito nemusí přijímat splash a nejsou "
-"omezeni šířkou pásma."
-
-msgid "Netmask"
-msgstr "Síťová maska"
-
-msgid "Network"
-msgstr "Síť"
-
-msgid "No clients connected"
-msgstr "Žádní klienti nejsou připojeni"
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-"Vezměte prosím na vědomí, že nejsme žádní ISP, ale experimentální komunitní "
-"síť."
-
-msgid "Policy"
-msgstr "Politika"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Uložit"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "Zbývající čas"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-"Pokud se chcete zeptat, proč jste byli zablokováni nebo jak získat zpět "
-"přístup, můžete se pokusit kontaktovat vlastníka tohoto přístupového bodu:"
-
-msgid "Traffic in/out"
-msgstr "Provoz dovnitř/ven"
-
-msgid "Upload limit"
-msgstr "Limit nahrávání"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr "Vítejte"
-
-msgid "Whitelist"
-msgstr "Whitelist"
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-"Sem můžete vložit text, který se zobrazí klientům.<br />Můžete použít tyto "
-"značky: ###COMMUNITY###, ###COMMUNITY_URL###, ###CONTACTURL###, "
-"###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-"Váš přístup do této sítě byl zablokován, nejspíše jste udělal něco, co naše "
-"pravidla výslovně zakazují."
-
-msgid "Your bandwidth is limited to"
-msgstr "Vaše šířka pásma je omezena na"
-
-msgid "blacklisted"
-msgstr "na černé listině"
-
-msgid "expired"
-msgstr "prošlý"
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr "provádět nějaký z druhů nelegálních činností"
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr "dočasně zablokován"
-
-msgid "unknown"
-msgstr "neznámý"
-
-msgid "use filesharing applications on this network"
-msgstr "používat aplikace na sdílení souborů v této síti"
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr "plýtvat šířkou pásma nepotřebným stahováním nebo streamy"
-
-msgid "whitelisted"
-msgstr "na bílé listině"
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "Přijmutím těchto pravidel můžete začít používat tuto síť pro"
-
-#~ msgid "hour(s). After this time you need to accept these rules again."
-#~ msgstr "hodin. Po uplynutí této doby musíte přijmout pravidla znovu."
-
-#~ msgid "the owner of this access point."
-#~ msgstr "vlastník tohoto přístupového bodu."
diff --git a/po/cs/statistics.po b/po/cs/statistics.po
deleted file mode 100644
index cb60879..0000000
--- a/po/cs/statistics.po
+++ /dev/null
@@ -1,684 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Action (target)"
-msgstr "Akce (cíl)"
-
-msgid "Add command for reading values"
-msgstr "Přidat příkaz pro čtení hodnot"
-
-msgid "Add matching rule"
-msgstr "Přidat pravidlo pro výběr"
-
-msgid "Add multiple hosts separated by space."
-msgstr "Přidat více hostů, oddělených mezerou"
-
-msgid "Add notification command"
-msgstr "Přidat příkaz pro upozornění"
-
-msgid "Base Directory"
-msgstr "Základní adresář"
-
-msgid "Basic monitoring"
-msgstr "Základní sledování"
-
-msgid "CPU Plugin Configuration"
-msgstr "Nastavení CPU pluginu"
-
-msgid "CSV Output"
-msgstr "CSV výstup"
-
-msgid "CSV Plugin Configuration"
-msgstr "Nastavení CSV pluginu"
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr "Interval vyprazdňování mezipaměti"
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Nastavení Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd je malý daemon pro shromažďování dat z nejrůznějších zdrojů zkrz "
-"rozdílné pluginy. Na této stránce můžete změnit obecná nastavení daemonu "
-"collectd."
-
-msgid "Conntrack"
-msgstr "Conntrack"
-
-msgid "Conntrack Plugin Configuration"
-msgstr "Nastavení pluginu Conntrack"
-
-msgid "DF Plugin Configuration"
-msgstr "Nastavení pluginu DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Nastavení DNS pluginu"
-
-msgid "Data collection interval"
-msgstr "Interval sběru dat"
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr "Rozsah cílových IP adres"
-
-msgid "Directory for collectd plugins"
-msgstr "Adresář s pluginy pro collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Adresář pro pod-nastavení"
-
-msgid "Disk Plugin Configuration"
-msgstr "Nastavení Disk pluginu"
-
-msgid "Disk Space Usage"
-msgstr "Využití místa na disku"
-
-msgid "Disk Usage"
-msgstr "Využití disku"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Nastavení E-Mail pluginu"
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable this plugin"
-msgstr "Povolit tento plugin"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Nastavení pluginu Exec"
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr "Vyprázdnit cache po"
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr "Grafy"
-
-msgid "Group"
-msgstr "Skupina"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Zde můžete nastavit externí příkazy, které budou spuštěny v tomto pořadí "
-"daemonem collectd. Ze standardního výstupu příkazů vezme collectd potřebné "
-"hodnoty."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Zde můžete definovat různá kritéria, podle kterých budou vybrána sledovaná "
-"pravidla iptables."
-
-msgid "Host"
-msgstr "Hostitel"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr "IP nebo hostname, odkud získat txtinfo výstup"
-
-msgid "IRQ Plugin Configuration"
-msgstr "Nastavení IRQ pluginu"
-
-msgid "Ignore source addresses"
-msgstr "Ignorovat zdrojové adresy"
-
-msgid "Incoming interface"
-msgstr "Příchozí rozhraní"
-
-msgid "Interface Plugin Configuration"
-msgstr "Nastavení Interface pluginu"
-
-msgid "Interfaces"
-msgstr "Rozhraní"
-
-msgid "Interrupts"
-msgstr "Přerušení"
-
-msgid "Interval for pings"
-msgstr "Interval pro ping"
-
-msgid "Iptables Plugin Configuration"
-msgstr "Nastavení Iptables pluginu"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-"Pokud nic nevyberete, rozhraní pro monitoring budou určena automaticky."
-
-msgid "Listen host"
-msgstr "Naslouchající hostitel"
-
-msgid "Listen port"
-msgstr "Naslouchající port"
-
-msgid "Listener interfaces"
-msgstr "Rozhraní naslouchajícího"
-
-msgid "Load Plugin Configuration"
-msgstr "Načíst nastavení pluginů"
-
-msgid "Maximum allowed connections"
-msgstr "Maximální množství povolených spojení"
-
-msgid "Memory"
-msgstr "Pameť"
-
-msgid "Memory Plugin Configuration"
-msgstr "Nastavení pluginu Memory (Paměť)"
-
-msgid "Monitor all except specified"
-msgstr "Sledovat vše kromě vybraných"
-
-msgid "Monitor all local listen ports"
-msgstr "Monitorovat všechny naslouchající porty"
-
-msgid "Monitor devices"
-msgstr "Sledovat zařízení"
-
-msgid "Monitor disks and partitions"
-msgstr "Sledovat disky a oddíly"
-
-msgid "Monitor filesystem types"
-msgstr "Sledovat typy souborových systémů"
-
-msgid "Monitor hosts"
-msgstr "Sledovat hostitele"
-
-msgid "Monitor interfaces"
-msgstr "Sledovat rozhraní"
-
-msgid "Monitor interrupts"
-msgstr "Sledovat přerušení"
-
-msgid "Monitor local ports"
-msgstr "Sledovat místní porty"
-
-msgid "Monitor mount points"
-msgstr "Sledovat přípojné body"
-
-msgid "Monitor processes"
-msgstr "Sledovat procesy"
-
-msgid "Monitor remote ports"
-msgstr "Sledovat vzdálené porty"
-
-msgid "Name of the rule"
-msgstr "Název pravidla"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Nastavení pluginu Netlink"
-
-msgid "Network"
-msgstr "Síť"
-
-msgid "Network Plugin Configuration"
-msgstr "Nastavení pluginu Síť"
-
-msgid "Network plugins"
-msgstr "Síťové pluginy"
-
-msgid "Network protocol"
-msgstr "Síťový protokol"
-
-msgid "Number of threads for data collection"
-msgstr "Počet vláken pro sběr dat"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr "Nastavení pluginu OLSRd"
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr "Možnosti"
-
-msgid "Outgoing interface"
-msgstr "Odchozí rozhraní"
-
-msgid "Output plugins"
-msgstr "Výstupní pluginy"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Nastavení pluginu Ping"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Processes"
-msgstr "Procesy"
-
-msgid "Processes Plugin Configuration"
-msgstr "Nastavení pluginu Procesy"
-
-msgid "Processes to monitor separated by space"
-msgstr "Sledované procesy (oddělte mezerou)"
-
-msgid "Processor"
-msgstr "Procesor"
-
-msgid "Qdisc monitoring"
-msgstr "Sledování Qdisc"
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Nastavení pluginu RRDTool"
-
-msgid "Rows per RRA"
-msgstr "Řádky na jeden RRA"
-
-msgid "Script"
-msgstr "Skript"
-
-msgid "Seconds"
-msgstr "Sekundy"
-
-msgid "Server host"
-msgstr "Hostitel serveru"
-
-msgid "Server port"
-msgstr "Port serveru"
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr "Soubor socketu"
-
-msgid "Socket group"
-msgstr "Skupina socketů"
-
-msgid "Socket permissions"
-msgstr "Oprávnění socketu"
-
-msgid "Source ip range"
-msgstr "Rozsah zdrojových IP"
-
-msgid "Specifies what information to collect about links."
-msgstr "Určuje, jaké informace sbírat o odkazech."
-
-msgid "Specifies what information to collect about routes."
-msgstr "Určuje, jaké informace sbírat o cestách"
-
-msgid "Specifies what information to collect about the global topology."
-msgstr "Určuje, jaké informace sbírat o globální topologii"
-
-msgid "Statistics"
-msgstr "Statistiky"
-
-msgid "Storage directory"
-msgstr "Úložný adresář"
-
-msgid "Storage directory for the csv files"
-msgstr "Úložný adresář pro soubory CSV"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Ukládat data jako poměrné hodnoty místo absolutních"
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr "Zatížení systému"
-
-msgid "System plugins"
-msgstr "Systémové pluginy"
-
-msgid "TCP Connections"
-msgstr "TCP spojení"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Nastavení pluginu TCPConns"
-
-msgid "TTL for network packets"
-msgstr "TTL pro síťové pakety"
-
-msgid "TTL for ping packets"
-msgstr "TTL pro pakety pingu"
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr "Plugin Conntrack shromažďuje statistiky o počtu sledovaných spojení."
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr "Plugin CPU shromažďuje základní statistiky o vytížení procesoru."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"Plugin CSV ukládá shromážděná data ve formátu CSV. Data mohou být později "
-"zpracována externími programy."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"Plugin DF shromažďuje statistiky o využití diskového prostoru na různých "
-"zařízeních, přípojných bodech nebo typech souborových systémů."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"Plugin Disk shromažďuje podrobné statistiky o využívání vybraného oddílu "
-"nebo celého disku."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"Plugin DNS shromažďuje podrobné statistky o provozu, vztahující se k DNS, na "
-"vybraných rozhraních."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"Plugin Email vytváří unixový socket, které může být využit pro odeslání "
-"statistik o emailu běžícímu daemonu collectd. Plugin je primárně určen pro "
-"použití ve spojení s Mail::SpamAssasin::Plugin::Collectd, ale stejně dobře "
-"může být využit jinak."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"Plugin Interface shromažďuje statistiky o provozu na vybraných rozhraních."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"Plugin Iptables monitoruje vybraná pravidla firewallu a shromažďuje "
-"informace o zpracovaných bajtech a paketech pro každé pravidlo."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"Plugin IRQ monitoruje množství požadavků na přerušení pro každé vybrané "
-"přerušení. Pokud není vybráno žádné přerušení, jsou monitorována všechna."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-"Plugin Iwinfo shromažďuje statistiky o síle, šumu a kvalitě bezdrátového "
-"signálu."
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "Plugin Load shromažďuje statistiky o obecné zátěži systému."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr "Plugin Memory shromažďuje statistiky o využití paměti."
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"Plugin Netlink shromažďuje rozšířené informace jako statistiky qdisk, class "
-"a filtru pro vybraná rozhraní."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"Plugin Network poskytuje síťovou komunikaci mezi různými instancemi daemonu "
-"collectd. Collectd může pracovat v režimu klienta i serveru. V režimu "
-"klienta jsou lokálně shromažďovaná data odeslána instanci serveru, jako "
-"server naopak collectd přijímá data z ostatních hostitelů."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"Plugin Ping bude odesílat ICMP echo odpovědi vybraným hostům a měřit "
-"zpáteční čas pro každého hosta."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"Plugin Processes shromažďuje informace o procesorovém času, výpadcích "
-"stránky a využití paměti vybranými programy."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"Plugin Rrdtool ukládá shromažďená data v souborech databáze RRD.<br /><br /"
-"><strong>Varování: Nastavení špatných hodnot bude mít za následek velkou "
-"spotřebu paměti v dočasném adresáří. Zařízení ze tak může stát nepoužitelným!"
-"</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"Balíček Statistiky je založen na <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> a využívá <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> pro kreslení diagramů z collectd."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"Plugin Tcpconns shromažďuje informace o otevřených TCP spojeních na "
-"vybraných portech."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"Plugin Unixsock vytváří unixový socket, které může být využit pro čtení dat "
-"z běžící instance collectd."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Tato sekce určuje, na kterých rozhraních bude collectd čekat na příchozí "
-"spojení."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr "Tato sekce určuje, na které servery budou odeslána shromážděná data."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Konfigurace pluginu Unixsock"
-
-msgid "Used PID file"
-msgstr "Použitý soubor PID (identifikátoru procesu)"
-
-msgid "User"
-msgstr "Uživatel"
-
-msgid "Verbose monitoring"
-msgstr "Podrobný monitoring"
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr "Nastavení pluginu Wireless Iwinfo"
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr "max. 16 znaků"
-
-msgid "reduces rrd size"
-msgstr "redukovaná velikost rrd"
-
-msgid "seconds; multiple separated by space"
-msgstr "sekundy, více hodnot oddělených mezerou"
-
-msgid "server interfaces"
-msgstr "rozhraní serveru"
-
-#~ msgid "Installed network plugins:"
-#~ msgstr "Instalované síťové pluginy:"
-
-#~ msgid "Installed output plugins:"
-#~ msgstr "Instalované výstupní pluginy:"
-
-#~ msgid ""
-#~ "Network plugins are used to collect information about open tcp "
-#~ "connections, interface traffic, iptables rules etc."
-#~ msgstr ""
-#~ "Síťové pluginy jsou používány pro shromažďování informací o otevřených tcp "
-#~ "spojeních, provozu na rozhraní, pravidel iptables atd."
-
-#~ msgid ""
-#~ "Output plugins provide different possibilities to store collected data. "
-#~ "It is possible to enable multiple plugin at one, for example to store "
-#~ "collected data in rrd databases and to transmit the data over the network "
-#~ "to other collectd instances."
-#~ msgstr ""
-#~ "Výstupní pluginy poskytují různé možnosti ukládání sesbíraných dat. Plugin "
-#~ "je možné v jeden okamžik povolit vícekrát , například pro ukládání dat do "
-#~ "rrd databází a předávání dat po síti jiným instancím daemonu collectd."
-
-#~ msgid ""
-#~ "System plugins collecting values about system state and ressource usage "
-#~ "on the device.:"
-#~ msgstr ""
-#~ "Systémové pluginy, shromažďující hodnoty o systémovém stavu a zdrojích, "
-#~ "používaných zařízením:"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "Plugin Wireless shromažďuje statistiky o síle, šumu a kvalitě bezdrátového "
-#~ "signálu."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Nastavení pluginu Wireless"
diff --git a/po/cs/tinyproxy.po b/po/cs/tinyproxy.po
deleted file mode 100644
index 08ed7dc..0000000
--- a/po/cs/tinyproxy.po
+++ /dev/null
@@ -1,254 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/cs/transmission.po b/po/cs/transmission.po
deleted file mode 100644
index 251ad55..0000000
--- a/po/cs/transmission.po
+++ /dev/null
@@ -1,289 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Alternative download speed"
-msgstr "Alternativní rychlost stahování"
-
-msgid "Alternative speed enabled"
-msgstr "Alternativní rychlost povolena"
-
-msgid "Alternative speed time begin"
-msgstr "Začátek doby alternativní rychlosti"
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/cs/upnp.po b/po/cs/upnp.po
deleted file mode 100644
index 619fec0..0000000
--- a/po/cs/upnp.po
+++ /dev/null
@@ -1,151 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 21:54+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"ACL stanovují, které vnější porty by měly být přesměrovány na které vnitřní "
-"adresy a porty"
-
-msgid "Action"
-msgstr "Akce"
-
-msgid "Active UPnP Redirects"
-msgstr "Aktivní přesměrování UPnP"
-
-msgid "Advanced Settings"
-msgstr "Pokročilé nastavení"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "Povolit přesměrování pouze na dotazující ip adresy"
-
-msgid "Announced model number"
-msgstr "Oznámené číslo modelu"
-
-msgid "Announced serial number"
-msgstr "Oznámené sériové číslo"
-
-msgid "Clean rules interval"
-msgstr "Interval čištění pravidel"
-
-msgid "Clean rules threshold"
-msgstr "Práh čištění pravidel"
-
-msgid "Client Address"
-msgstr "Adresa klienta"
-
-msgid "Client Port"
-msgstr "Port klienta"
-
-msgid "Collecting data..."
-msgstr "Probíhá sběr dat.."
-
-msgid "Comment"
-msgstr "Komentář"
-
-msgid "Delete Redirect"
-msgstr "Odstranit přesměrování"
-
-msgid "Device UUID"
-msgstr "UUID zařízení"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Povolit funkčnost NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Povolit funkčnost UPnP"
-
-msgid "Enable additional logging"
-msgstr "Povolit přídavné logování"
-
-msgid "Enable secure mode"
-msgstr "Povolit bezpečný režim"
-
-msgid "External Port"
-msgstr "Vnější port"
-
-msgid "External ports"
-msgstr "Vnější porty"
-
-msgid "General Settings"
-msgstr "Obecné nastavení"
-
-msgid "Internal addresses"
-msgstr "Vnitřní adresy"
-
-msgid "Internal ports"
-msgstr "Vnitřní porty"
-
-msgid "MiniUPnP ACLs"
-msgstr "MiniUPnP ACL listy"
-
-msgid "MiniUPnP settings"
-msgstr "Nastavení MiniUPnP"
-
-msgid "Notify interval"
-msgstr "Interval oznamování"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Presentation URL"
-msgstr "Prezentace URL"
-
-msgid "Protocol"
-msgstr "Protokol"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Vypisovat extra ladící informace do systémového záznamu"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Hlásit uptime systému namísto uptime daemonu"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Spustit službu UPnP a NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Nejsou zde žádná aktivní přesměrování"
-
-msgid "UPNP"
-msgstr "UPNP"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP umožňuje klientům v místní síti automaticky nakonfigurovat router."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP umožňuje klientům v místní síti automaticky nakonfigurovat router."
-
-msgid "UPnP lease file"
-msgstr "Soubor UPnP výpůjček"
-
-msgid "Universal Plug & Play"
-msgstr "Univerzální Plug & Play"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Pouze informační hodnoty (v KByte/s)"
-
-msgid "enable"
-msgstr "povolit"
diff --git a/po/cs/ushare.po b/po/cs/ushare.po
deleted file mode 100644
index d908e91..0000000
--- a/po/cs/ushare.po
+++ /dev/null
@@ -1,53 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 21:49+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "Složky s obsahem"
-
-msgid "Disable telnet console"
-msgstr "Zakázat telnet konzoli"
-
-msgid "Disable webinterface"
-msgstr "Zakázat webové rozhraní"
-
-msgid "Enable"
-msgstr "Povolit"
-
-msgid "Interface"
-msgstr "Rozhraní"
-
-msgid "Options"
-msgstr "Možnosti"
-
-msgid "Servername"
-msgstr "Název serveru"
-
-msgid "Settings"
-msgstr "Nastavení"
-
-msgid "Username"
-msgstr "Uživatelské jméno"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"uShare je UPnP (TM) A/V & DLNA Media Server. Implementuje součást serveru, "
-"který poskytuje UPnP mediální zařízení s informacemi o dostupných "
-"multimediálních souborech."
diff --git a/po/cs/uvc_streamer.po b/po/cs/uvc_streamer.po
deleted file mode 100644
index 2a53342..0000000
--- a/po/cs/uvc_streamer.po
+++ /dev/null
@@ -1,44 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-24 14:51+0200\n"
-"Last-Translator: awm1 <awm1klimes8vladimir@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Počet snímků za sekundu"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Rozlišení"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Nastavení"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Stream z webkamery"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Toto menu umožňuje konfiguraci připojených webkamer kompatibilních s UVC. "
-"Videostream je dostupný přes webový prohlížeč na síťové adrese routeru, "
-"např. <a href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/cs/vnstat.po b/po/cs/vnstat.po
deleted file mode 100644
index 4818374..0000000
--- a/po/cs/vnstat.po
+++ /dev/null
@@ -1,64 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configuration"
-msgstr "Konfigurace"
-
-msgid "Daily traffic"
-msgstr "Denní přenos"
-
-msgid "Graphs"
-msgstr "Grafy"
-
-msgid "Hourly traffic"
-msgstr "Hodinový přenos"
-
-msgid "Monitor selected interfaces"
-msgstr "Sledovat vybraná zařízení"
-
-msgid "Monthly traffic"
-msgstr "Měsíční přenos"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Zatím nebyla nastavena žádná databáze. Přejděte na konfiguraci VnStatu a "
-"povolnet sledování jednoho nebo více zařízení."
-
-msgid "Restart VnStat"
-msgstr "Restartovat VnStat"
-
-msgid "Summary display"
-msgstr "Souhrn"
-
-msgid "Top 10 display"
-msgstr "Top 10"
-
-msgid "Update »"
-msgstr "Aktualizovat »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Grafy VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Sledování přenosu VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat je nástroj pro sledování přenosů dat pro Linux, který ukládá "
-"informace o síťovém provozu na vybraných zařízeních."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "Služba VnStat byla restartována"
diff --git a/po/cs/voice_core.po b/po/cs/voice_core.po
deleted file mode 100644
index e4eae35..0000000
--- a/po/cs/voice_core.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-29 21:47+0200\n"
-"Last-Translator: Astran <martin.hromadko@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Telefony"
-
-msgid "Voice"
-msgstr "Hlas"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "Telefony"
diff --git a/po/cs/voice_diag.po b/po/cs/voice_diag.po
deleted file mode 100644
index 4939d20..0000000
--- a/po/cs/voice_diag.po
+++ /dev/null
@@ -1,29 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Diagnostics"
-msgstr "Diagnostika"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Diagnostiky, dostupné na vašem zařízení, závisí na modulech, které máte "
-"nainstalovány."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Pod tímto menu se nachází možnosti, které vám umožní nastavovat a provádět "
-"testy hlasových operací vašeho systému. Tyto jsou známy pod názvem "
-"diagnostika."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "Diagnostika"
diff --git a/po/cs/watchcat.po b/po/cs/watchcat.po
deleted file mode 100644
index 6711b84..0000000
--- a/po/cs/watchcat.po
+++ /dev/null
@@ -1,70 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-24 15:54+0200\n"
-"Last-Translator: awm1 <awm1klimes8vladimir@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Forced reboot delay"
-msgstr "Prodleva nuceného restartu"
-
-msgid "Host address to ping"
-msgstr "Adresa zařízení, vůči kterému bude testování připojení (ping)"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"Perioda testování připojení; výchozí časovou jednotkou jsou sekundy, avšak "
-"použitím přípony \"m\" lze určit minuty, pomocí \"h\" hodiny a \"d\" dny"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"Pokud je nastaven periodický režim práce, tak tato hodnota vyjadřuje "
-"interval opakování restartu. V 'internetovém' režimu práce hodnota vyjadřuje "
-"nejdelší možnou dobu, po kterou smí být zařízení bez připojení k internetu, "
-"resp. nastavenému testovacímu zařízení - po jejím uplynutí je proveden "
-"automaticky reset. Výchozí jednotkou jsou sekundy, pomocí přípony \"m\" lze "
-"nastavit minuty, pomocí \"h\" hodiny a prostřednictvím \"d\" dny"
-
-msgid "Operating mode"
-msgstr "Pracovní režim"
-
-msgid "Period"
-msgstr "Perioda"
-
-msgid "Ping host"
-msgstr "Cílové zařízení příkazu ping"
-
-msgid "Ping period"
-msgstr "Interval opakování testu ping"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Nástroj Watchcat umožňuje nastavit periodický interval restartu zařízení a/"
-"nebo provést restart i tehdy, když dojde ke ztrátě připojení k internetu/"
-"danému zařízení po stanovenou dobu"
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"Pokud je nutno restartovat systém, provede Watchcat \"měkký\" restart "
-"(hodnota 0); zadáním nenulové hodnoty nastavíte interval (v sekundách), za "
-"který program provede \"tvrdý\" restart, pokud \"měkký\" selže."
diff --git a/po/cs/wol.po b/po/cs/wol.po
deleted file mode 100644
index e6e89ce..0000000
--- a/po/cs/wol.po
+++ /dev/null
@@ -1,54 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2012-04-24 15:34+0200\n"
-"Last-Translator: awm1 <awm1klimes8vladimir@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Vysílat broadcastem na všech rozhraních"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Vyberte zařízení, které má být probuzeno, nebo zadejte jeho MAC adresu"
-
-msgid "Host to wake up"
-msgstr "Adresa zařízení, které má být probuzeno"
-
-msgid "Network interface to use"
-msgstr "Použité síťové rozhraní"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Může se stát, že pro dané cílové zařízení bude fungovat pouze jeden z "
-"programů. Pokud první selže, vyzkoušejte další."
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Zde se nastaví síťové rozhraní, přes které budou zasílány WoL packety."
-
-msgid "Starting WoL utility:"
-msgstr "Spouštím nástroj WoL:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Funkce \"Wake on LAN\" umožňuje vzdáleně spouštět počítače v místní síti."
-
-msgid "Wake up host"
-msgstr "Adresa cílového zařízení"
-
-msgid "WoL program"
-msgstr "Program provádějící WoL"
diff --git a/po/cs/wshaper.po b/po/cs/wshaper.po
deleted file mode 100644
index 3ebbe00..0000000
--- a/po/cs/wshaper.po
+++ /dev/null
@@ -1,57 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-24 15:20+0200\n"
-"Last-Translator: awm1 <awm1klimes8vladimir@gmail.com>\n"
-"Language-Team: none\n"
-"Language: cs\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "Příchozí rychlost"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Rychlost stahování dat v kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Adresa počítače nebo sítě v CIDR notaci."
-
-msgid "Interface"
-msgstr "Síťové rozhraní"
-
-msgid "Low priority destination ports"
-msgstr "Cílové porty s nízkou prioritou"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Adresy cílových počítačů s nízkou prioritou"
-
-msgid "Low priority hosts (Source)"
-msgstr "Adresy zdrojových počítačů s nízkou prioritou"
-
-msgid "Low priority source ports"
-msgstr "Zdrojové porty s nízkou prioritou"
-
-msgid "Uplink"
-msgstr "Odchozí rychlost"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Rychlost odesílání dat v kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Nastavení skriptu Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Úkolem skriptu Wondershaper je řízení provozu na daném síťovém rozhraní. "
-"Snaží se zajistit nízké přenosové zpoždění pro \"interaktivní\" síťový "
-"provoz (např. SSH), a to především v okamžicích, kdy ostatní síťový provoz "
-"zahltí linku."
diff --git a/po/el/ahcp.po b/po/el/ahcp.po
deleted file mode 100644
index 682653b..0000000
--- a/po/el/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 16:25+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "Εξυπηρετητής AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr "Ενεργά AHCP Leases"
-
-msgid "Address"
-msgstr "Διεύθυνση"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr "Συλλέγονται δεδομένα..."
-
-msgid "Forwarder"
-msgstr "Προωθητής"
-
-msgid "General Setup"
-msgstr "Γενικές ρυθμίσεις"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 και IPv6"
-
-msgid "IPv4 only"
-msgstr "μόνο IPv4"
-
-msgid "IPv6 only"
-msgstr "μόνο IPv6"
-
-#, fuzzy
-msgid "Lease directory"
-msgstr "Κατάλογος leases"
-
-msgid "Lease validity time"
-msgstr "Χρόνος εγκυρότητας lease"
-
-msgid "Log file"
-msgstr "Αρχείο καταγραφής"
-
-msgid "Multicast address"
-msgstr "Διεύθυνση multicast"
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr "Θύρα"
-
-msgid "Protocol family"
-msgstr "Οικογένεια πρωτοκόλλου"
-
-msgid "Served interfaces"
-msgstr "Εξυπηρετούμενες διεπαφές"
-
-msgid "Server"
-msgstr "Εξυπηρετητής"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Καθορίζει τους εξυπηρετητές NTP σε IPv4 και IPv6 που ανακοινώνονται"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Καθορίζει τους εξυπηρετητές DNS σε IPv4 και IPv6 που ανακοινώνονται"
-
-#, fuzzy
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-"Καθορίζει τα προθέματα διευθύνσεων IPv4 και IPv6 που ανακοινώνονται, σε "
-"μορφή CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-#, fuzzy
-msgid "There are no active leases."
-msgstr "Δεν υπάρχουν ενεργά leases"
-
-msgid "Unique ID file"
-msgstr "Αρχείο μοναδικού αναγνωριστικού"
diff --git a/po/el/asterisk.po b/po/el/asterisk.po
deleted file mode 100644
index 7a0fee7..0000000
--- a/po/el/asterisk.po
+++ /dev/null
@@ -1,71 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-03-19 14:55+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Γενικές επιλογές του Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Φάκελος AGI"
-
-#~ msgid "Debug Level"
-#~ msgstr "Επίπεδο αποσφαλμάτωσης"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Απενεργοποίηση ορισμένων μηνυμάτων"
-
-#~ msgid "High Priority"
-#~ msgstr "Υψηλή Προτεραιότητα"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Αρχικοποίηση Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Χρήση εσωτερικού χρονόμετρου"
-
-#~ msgid "Log directory"
-#~ msgstr "Φάκελος καταγραφής"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Μέγιστος επιτρεπόμενος αριθμός κλήσεων"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Μέγιστος φόρτος για παύση εισερχόμενων κλήσεων"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Απενεργοποίηση χρωμάτων κονσόλας"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Κρυφός φάκελος αρχείων ήχου"
-
-#~ msgid "include"
-#~ msgstr "περιλαμβάνω"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Καθαρισμός γενικών μεταβλητών"
-
-#~ msgid "Connection to use"
-#~ msgstr "Χρήση σύνδεσης"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Μέθοδος Επανεκκίνησης"
-
-#~ msgid "Parameter"
-#~ msgstr "Παράμετρος"
-
-#~ msgid "JPEG (Joint Picture Experts Group) Image"
-#~ msgstr "Εικόνα JPEG (Joint Picture Experts Group)"
-
-#~ msgid "Application"
-#~ msgstr "Εφαρμογή"
diff --git a/po/el/base.po b/po/el/base.po
deleted file mode 100644
index ad57cc3..0000000
--- a/po/el/base.po
+++ /dev/null
@@ -1,3706 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-03-31 15:35+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(παράθυρο %d λεπτών, διάστημα %d δευτερολέπτων)"
-
-msgid "(%s available)"
-msgstr "(%s διαθέσιμα)"
-
-msgid "(empty)"
-msgstr "(κενό)"
-
-msgid "(no interfaces attached)"
-msgstr "(χωρίς προσαρτημένες διεπαφές)"
-
-msgid "-- Additional Field --"
-msgstr "-- Επιπλέον Πεδίο --"
-
-msgid "-- Please choose --"
-msgstr "-- Παρακαλώ επιλέξτε --"
-
-msgid "-- custom --"
-msgstr "-- προσαρμοσμένο --"
-
-msgid "1 Minute Load:"
-msgstr "Φορτίο 1 λεπτού:"
-
-msgid "15 Minute Load:"
-msgstr "Φορτίο 15 λεπτών:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz με δεύτερο κανάλι υψηλότερα"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz με δεύτερο κανάλι χαμηλότερα"
-
-msgid "5 Minute Load:"
-msgstr "Φορτίο 5 λεπτών:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "Θύρα ερωτημάτων <abbr title=\"Σύστημα Ονόματος Τομέα\">DNS</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "Θύρα εξυπηρετητή <abbr title=\"Σύστημα Ονόματος Τομέα\">DNS</abbr>"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"Οι <abbr title=\"Σύστημα Ονόματος Τομέα\">DNS</abbr> εξυπηρετητές θα "
-"ερωτηθούν με την σειρά εμφάνισης στο αρχείο resolvfile"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Διεύθυνση <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "Πύλη <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "Μάσκα <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"Διεύθυνση <abbr title=\"Internet Protocol Version 6\">IPv6</abbr> ή Δίκτυο "
-"(CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "Πύλη <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Παραμετροποίηση <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Όνομα <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Διεύθυνση <abbr title=\"Media Access Control\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"μέγιστο\">Μεγ.</abbr> πλήθος <abbr title=\"Πρωτόκολλο "
-"Παραμετροποίησης Δυναμικού Συστήματος\">DHCP</abbr> leases"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"μέγιστο\">Μεγ.</abbr> μέγεθος πακέτου <abbr title=\"Μηχανισμοί "
-"επεκτάσεων για Συστήματα Ονόματος Τομέα\">EDNS0</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"μέγιστο\">Μεγ.</abbr> πλήθος ταυτόχρονων ερωτηματων"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "Υποστήριξη AR"
-
-msgid "ARP retry threshold"
-msgstr "Όριο επαναδοκιμών ARP"
-
-msgid "ATM Bridges"
-msgstr "Γέφυρες ΑΤΜ"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "ATM Εικονικό Κανάλι Αναγνωριστή (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "ATM Εικονικό μονοπάτι Αναγνωριστή (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"Οι γέφυρες ATM αποκαλύπτουν ενθυλακωμένες ethernet σε συνδέσεις AAL5 σαν "
-"εικονικές διεπαφές δικτύου Linux, οι οποίες μπορούν να χρησιμοποιηθούν σε "
-"συνδυασμό με DHCP ή PPP για την κλήση προς τον παροχέα δικτύου."
-
-msgid "ATM device number"
-msgstr "Αριθμός συσκευής ATM"
-
-msgid "Accept router advertisements"
-msgstr "Αποδοχή διαφημίσεων δρομολογητή"
-
-msgid "Access Concentrator"
-msgstr "Συγκεντρωτής Πρόσβασης "
-
-msgid "Access Point"
-msgstr "Σημείο Πρόσβασης"
-
-msgid "Action"
-msgstr "Ενέργεια"
-
-msgid "Actions"
-msgstr "Ενέργειες"
-
-msgid "Activate this network"
-msgstr "Ενεργοποίηση αυτού του δικτύου"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Ενεργές Διαδρομές <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Ενεργές Διαδρομές <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "Active Connections"
-msgstr "Ενεργές Συνδέσεις"
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Προσθήκη"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-"Προσθήκη κατάληξης τοπικού τομέα για ονόματα εξυπηρετούμενα από αρχεία hosts "
-
-msgid "Add new interface..."
-msgstr "Προσθήκη νέας διεπαφής..."
-
-msgid "Additional Hosts files"
-msgstr "Επιπλέον αρχεία Hosts"
-
-msgid "Address"
-msgstr "Διεύθυνση"
-
-msgid "Address to access local relay bridge"
-msgstr "Διεύθυνση για πρόσβαση σε την τοπική γέφυρα αναμετάδοσης"
-
-msgid "Administration"
-msgstr "Διαχείριση"
-
-msgid "Advanced Settings"
-msgstr "Προχωρημένες Ρυθμίσεις"
-
-msgid "Advertise IPv6 on network"
-msgstr "Διαφήμιση IPv6 στο δίκτυο"
-
-msgid "Advertised network ID"
-msgstr "Διαφημιζόμενο αναγνωριστικό δικτύου"
-
-msgid "Alert"
-msgstr "Ειδοποίηση"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Επιτρέπει την εξουσιοδότηση <abbr title=\"Secure Shell\">SSH</abbr> με "
-"κωδικό πρόσβασης"
-
-msgid "Allow all except listed"
-msgstr "Να επιτρέπονται όλες, εκτός από αυτές στη λίστα"
-
-msgid "Allow listed only"
-msgstr "Να επιτρέπονται μόνο αυτές στην λίστα"
-
-msgid "Allow localhost"
-msgstr "Να επιτρέπεται το localhost"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Να επιτρέπεται σε απομακρυσμένα συστήματα να συνδέονται σε τοπικά "
-"προωθημένες SSH θύρες"
-
-msgid "Allow root logins with password"
-msgstr "Να επιτρέπονται root συνδέσεις με κωδικό πρόσβασης"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-"Να επιτρέπεται στον χρήστη <em>root</em> να συνδέετε με κωδικό πρόσβασης"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Να επιτρέπονται απαντήσεις από ανώτερο επίπεδο εντός του εύρους 127.0.0.0/8, "
-"π.χ. για υπηρεσίες RBL"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Το επιτρεπόμενο εύρος είναι από 1 έως 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Ένα επιπλέον δίκτυο θα δημιουργηθεί εάν αυτό αφεθεί κενό"
-
-msgid "Antenna 1"
-msgstr "Κεραία 1"
-
-msgid "Antenna 2"
-msgstr "Κεραία 2"
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr "Οιαδήποτε ζώνη"
-
-msgid "Apply"
-msgstr "Εφαρμογή"
-
-msgid "Applying changes"
-msgstr "Εφαρμογή αλλαγών"
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr "Συνδεδεμένοι Σταθμοί"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr "Εξουσιοδότηση"
-
-msgid "Authoritative"
-msgstr "Κύριος"
-
-msgid "Authorization Required"
-msgstr "Απαιτείται Εξουσιοδότηση"
-
-msgid "Auto Refresh"
-msgstr "Αυτόματη Ανανέωση"
-
-msgid "Available"
-msgstr "Διαθέσιμο"
-
-msgid "Available packages"
-msgstr "Διαθέσιμα πακέτα"
-
-msgid "Average:"
-msgstr "Μέσος Όρος:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Πίσω"
-
-msgid "Back to Overview"
-msgstr "Πίσω προς Επισκόπηση"
-
-msgid "Back to configuration"
-msgstr "Πίσω προς παραμετροποίηση"
-
-msgid "Back to overview"
-msgstr "Πίσω προς επισκόπηση"
-
-msgid "Back to scan results"
-msgstr "Πίσω στα αποτελέσματα σάρωσης"
-
-msgid "Background Scan"
-msgstr "Σάρωση Παρασκηνίου"
-
-msgid "Backup / Flash Firmware"
-msgstr "Αντίγραφο ασφαλείας / Εγγραφή FLASH Υλικολογισμικό"
-
-msgid "Backup / Restore"
-msgstr "Αποθήκευση / Επαναφορά Αντίγραφου Ασφαλείας"
-
-msgid "Backup file list"
-msgstr "Λίστα αρχείων για αντίγραφο ασφαλείας"
-
-#, fuzzy
-msgid "Bad address specified!"
-msgstr "Μη έγκυρη διεύθυνση!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Παρακάτω είναι η προκαθορισμένη λίστα αρχείων για αντιγραφή ασφαλείας. "
-"Αποτελείτε από αλλαγμένα αρχεία παραμετροποίησης σημαδεμένα από το opkg, "
-"ουσιώδη βασικά αρχεία καθώς και καθορισμένα από το χρήστη μοτίβα αντιγράφων "
-"ασφαλείας."
-
-msgid "Bitrate"
-msgstr "Ρυθμός δεδομένων"
-
-msgid "Bogus NX Domain Override"
-msgstr "Παράκαμψη Ψευδούς Τομέα NX"
-
-msgid "Bridge"
-msgstr "Γέφυρα"
-
-msgid "Bridge interfaces"
-msgstr "Γεφύρωμα διεπαφών"
-
-msgid "Bridge unit number"
-msgstr "Αριθμός μονάδας γέφυρας"
-
-msgid "Bring up on boot"
-msgstr "Ανέβασμα κατά την εκκίνηση"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr "Κουμπιά"
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr "Χρήση CPU (%)"
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr "Ακύρωση"
-
-msgid "Chain"
-msgstr "Αλυσίδα"
-
-msgid "Changes"
-msgstr "Αλλαγές"
-
-msgid "Changes applied."
-msgstr "Αλλαγές εφαρμόστηκαν."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Αλλάζει τον κωδικό διαχειριστή για πρόσβαση στη συσκευή"
-
-msgid "Channel"
-msgstr "Κανάλι"
-
-msgid "Check"
-msgstr "Έλεγχος"
-
-msgid "Checksum"
-msgstr "Άθροισμα Ελέγχου"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Επιλέξατε την ζώνη τείχους προστασίας που επιθυμητέ να αναθέσετε σε αυτήν "
-"την διεπαφή. Επιλέξτε <em>απροσδιόριστο</em> για να αφαιρέσετε την διεπαφή "
-"από την συσχετισμένη ζώνη ή συμπληρώστε το <em>δημιουργία</em> πεδίο για να "
-"προσδιορίσετε μία νέα ζώνη και να προσαρτήσετε την διεπαφή σε αυτό."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Κλικ στο \"Δημιουργία αρχείου\" για να κατεβάσετε ένα tar αρχείο με τα "
-"τρέχοντα αρχεία παραμετροποίησης. Για να επαναφέρετε το υλικολογισμικό στην "
-"αρχική του κατάσταση, κάντε κλικ στο \"Εκτέλεσε επαναφορά\" (δυνατό μόνο σε "
-"squashfs εικόνες)."
-
-msgid "Client"
-msgstr "Πελάτης"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "Αναγνωριστικό πελάτη που αποστέλλετε κατά την αίτηση DHCP"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Κλείσιμο, μη ενεργών συνδέσεων μετά το πέρας του ορισμένου αριθμού "
-"δευτερολέπτων, χρησιμοποιήστε 0 για να εξακολουθούν να υφίστανται επ' "
-"αόριστον"
-
-msgid "Close list..."
-msgstr "Κλείσιμο λίστας..."
-
-msgid "Collecting data..."
-msgstr "Συλλογή δεδομένων..."
-
-msgid "Command"
-msgstr "Εντολή"
-
-msgid "Common Configuration"
-msgstr "Κοινή Παραμετροποίηση"
-
-msgid "Compression"
-msgstr "Συμπίεση"
-
-msgid "Configuration"
-msgstr "Παραμετροποίηση"
-
-msgid "Configuration applied."
-msgstr "Η Παραμετροποίηση εφαρμόστηκε."
-
-msgid "Configuration files will be kept."
-msgstr "Τα αρχεία παραμετροποίησης θα διατηρηθούν."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Ορίζει το συγκεκριμένο σημείο προσάρτησης ως επικαλύπτον αποθηκευτικό χώρο "
-"για το block-extroot"
-
-msgid "Confirmation"
-msgstr "Επιβεβαίωση"
-
-msgid "Connect"
-msgstr "Σύνδεση"
-
-msgid "Connected"
-msgstr "Συνδεδεμένος"
-
-msgid "Connection Limit"
-msgstr "Όριο Συνδέσεων"
-
-msgid "Connections"
-msgstr "Συνδέσεις"
-
-msgid "Country"
-msgstr "Χώρα"
-
-msgid "Country Code"
-msgstr "Κωδικός Χώρας"
-
-msgid "Cover the following interface"
-msgstr "Κάλυψη της ακόλουθης διεπαφής"
-
-msgid "Cover the following interfaces"
-msgstr "Κάλυψη των ακόλουθων διεπαφών"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Δημιουργία / Ανάθεση ζώνης τείχους προστασίας"
-
-msgid "Create Interface"
-msgstr "Δημιουργία Διεπαφής"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr "Επίπεδο Καταγραφής Cron"
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Ρυθμίζει, αν είναι δυνατόν, την συμπεριφορά των <abbr title=\"Light Emitting "
-"Diode\">LED</abbr> της συσκευής."
-
-msgid "DHCP Leases"
-msgstr "DHCP Leases"
-
-msgid "DHCP Server"
-msgstr "Εξυπηρετητής DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP και DNS"
-
-msgid "DHCP client"
-msgstr "Πελάτης DHCP"
-
-msgid "DHCP-Options"
-msgstr "Επιλογές DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Προωθήσεις DNS"
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr "Αποσφαλμάτωση"
-
-msgid "Default %d"
-msgstr "Προεπιλογή %d"
-
-msgid "Default gateway"
-msgstr "Προεπιλεγμένη πύλη"
-
-msgid "Default state"
-msgstr "Προεπιλεγμένη κατάσταση"
-
-msgid "Define a name for this network."
-msgstr "Ορίστε ένα όνομα για αυτό το δίκτυο."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Ορίστε επιπλέον επιλογές DHCP, που διαφημίζουν διαφορετικούς εξυπηρετητές "
-"DNS στους πελάτες, για παράδειγμα \"<code>6,192.168.2.1,192.168.2.2</code>\"."
-
-msgid "Delete"
-msgstr "Διαγραφή"
-
-msgid "Delete this interface"
-msgstr "Διαγραφή αυτής της διεπαφής"
-
-msgid "Delete this network"
-msgstr "Διαγραφή αυτού του δικτύου"
-
-msgid "Description"
-msgstr "Περιγραφή"
-
-msgid "Design"
-msgstr "Εμφάνιση"
-
-msgid "Destination"
-msgstr "Προορισμός"
-
-msgid "Device"
-msgstr "Συσκευή"
-
-msgid "Device Configuration"
-msgstr "Παραμετροποίηση Συσκευής"
-
-msgid "Diagnostics"
-msgstr "Διαγνωστικά"
-
-msgid "Directory"
-msgstr "Κατάλογος"
-
-msgid "Disable"
-msgstr "Απενεργοποίηση"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Απενεργοποίηση <abbr title=\"Πρωτόκολλο Δυναμικής Απόδοσης Διεύθυνσης"
-"\">DHCP</abbr> για αυτή τη διεπαφή."
-
-msgid "Disable DNS setup"
-msgstr "Απενεργοποίηση ρυθμίσεων DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Απενεργοποίηση χρονιστή HW-Beacon"
-
-msgid "Disabled"
-msgstr "Απενεργοποιημένο"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Αγνόησε τις απαντήσεις ανοδικής ροής RFC1918"
-
-msgid "Displaying only packages containing"
-msgstr "Εμφάνιση μόνο πακέτων που περιέχουν"
-
-msgid "Distance Optimization"
-msgstr "Βελτιστοποίηση Απόστασης"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Απόσταση σε μέτρα από το πιο απομακρυσμένο μέλος του δικτύου."
-
-msgid "Diversity"
-msgstr "Διαφορική Λήψη"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Ο Dnsmasq είναι ένας συνδυασμός εξυπηρετητή <abbr title=\"Πρωτόκολλο "
-"Δυναμικής Απόδοσης Παραμέτρων Συστήματος\">DHCP</abbr> και προωθητή<abbr "
-"title=\"Σύστημα Ονόματος Τομέα\">DNS</abbr> για τείχη προστασίας <abbr title="
-"\"Μεταφραστή Διεύθυνσης Δικτύου\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-"Να μην αποθηκεύονται στη λανθάνουσα μνήμη οι αρνητικές απαντήσεις, π.χ. για "
-"μη υπαρκτούς τομείς."
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Να μην προωθούνται αιτήματα τα οποία δεν μπορούν να απαντηθούν από δημόσιους "
-"εξυπηρετητές ονομάτων"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr "Να μην στέλνονται απαντήσεις σε probes"
-
-msgid "Domain required"
-msgstr "Απαίτηση για όνομα τομέα"
-
-msgid "Domain whitelist"
-msgstr "Λευκή λίστα τομέων"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Να μην προωθούνται ερωτήματα <abbr title=\"Domain Name System\">DNS</abbr> "
-"χωρίς όνομα τομέα <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "Download and install package"
-msgstr "Κατέβασμα και εγκατάσταση πακέτου"
-
-msgid "Download backup"
-msgstr "Κατέβασμα αντιγράφου ασφαλείας"
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Το Dropbear προσφέρει πρόσβαση σε <abbr title=\"Secure Shell\">SSH</abbr> "
-"κέλυφος μέσω δικτύου και έναν ενσωματωμένο εξυπηρετητή <abbr title=\"Secure "
-"Copy\">SCP</abbr>"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Δυναμικό <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "Δυναμικό τούνελ"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Δυναμική απόδοση DHCP διευθύνσεων στους πελάτες. Σε περίπτωση "
-"απενεργοποίησης, μόνο πελάτες με στατικα leases θα εξυπηρετούνται."
-
-msgid "EAP-Method"
-msgstr "Μέθοδος EAP"
-
-msgid "Edit"
-msgstr "Επεξεργασία"
-
-msgid "Edit this interface"
-msgstr "Επεξεργασία αυτής της διεπαφής"
-
-msgid "Edit this network"
-msgstr "Επεξεργασία αυτού του δικτύου"
-
-msgid "Emergency"
-msgstr "Έκτακτη ανάγκη"
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Ενεργοποίηση <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Ενεργοποίηση ενημέρωσης δυναμικού τερματικού σημείου HE.net."
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Ενεργοποίηση διαπραγμάτευσης IPv6 πάνω στη PPP ζεύξη"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Ενεργοποίηση διέλευσης Jumbo Frame"
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr "Ενεργοποίηση εξυπηρετητή TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "Ενεργοποίηση λειτουργίας VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Ένεργοποίηση learning and aging"
-
-msgid "Enable this mount"
-msgstr "Ενεργοποίηση αυτής της προσάρτησης"
-
-msgid "Enable this swap"
-msgstr "Ενεργοποίηση αυτής της swap"
-
-msgid "Enable/Disable"
-msgstr "Ενεργοποίηση/Απενεργοποίηση"
-
-msgid "Enabled"
-msgstr "Ενεργοποιημένο"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr "Λειτουργία ενθυλάκωσης"
-
-msgid "Encryption"
-msgstr "Κρυπτογράφηση"
-
-msgid "Erasing..."
-msgstr "Διαγράφεται..."
-
-msgid "Error"
-msgstr "Σφάλμα"
-
-msgid "Ethernet Adapter"
-msgstr "Προσαρμογέας Ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Ethernet Switch"
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr "Λήγει"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Ο ελάχιστος χρόνος λήξεως των διευθύνσεων lease είναι 2 λεπτά (<code>2m</"
-"code>)."
-
-msgid "External system log server"
-msgstr "Εξωτερικός εξυπηρετητής καταγραφής συστήματος"
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "Γρήγορα Πλαίσια"
-
-msgid "File"
-msgstr "Αρχείο"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Όνομα αρχείου της εικόνας εκκίνησης που διαφημίζετε στους πελάτες"
-
-msgid "Filesystem"
-msgstr "Σύστημα Αρχείων"
-
-msgid "Filter"
-msgstr "Φίλτρο"
-
-msgid "Filter private"
-msgstr "Φιλτράρισμα ιδιωτικών"
-
-msgid "Filter useless"
-msgstr "Φιλτράρισμα άχρηστων"
-
-msgid "Find and join network"
-msgstr "Εύρεση και σύνδεση σε δίκτυο"
-
-msgid "Find package"
-msgstr "Εύρεση πακέτου"
-
-msgid "Finish"
-msgstr "Τέλος"
-
-msgid "Firewall"
-msgstr "Τείχος Προστασίας"
-
-msgid "Firewall Settings"
-msgstr "Ρυθμίσεις Τείχους Προστασίας"
-
-msgid "Firewall Status"
-msgstr "Κατάσταση Τείχους Προστασίας"
-
-msgid "Firmware Version"
-msgstr "Έκδοση Υλικολογισμικού"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr "Σημαίες"
-
-msgid "Flash Firmware"
-msgstr "Φλασάρισμα Firmware"
-
-msgid "Flash image..."
-msgstr "Φλασάρισμα εικόνας..."
-
-msgid "Flash new firmware image"
-msgstr "Φλασάρισμα νέας εικόνας υλικολογισμικού"
-
-msgid "Flash operations"
-msgstr "Λειτουργίες φλασάρισματος"
-
-msgid "Flashing..."
-msgstr "Φλασάρεται..."
-
-msgid "Force"
-msgstr "Επιβολή"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr "Επιβολή CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-"Επιβολή DHCP σε αυτό το δίκτυο ακόμα κι αν έχει εντοπιστεί άλλος εξυπηρετητής"
-
-msgid "Force TKIP"
-msgstr "Επιβολή TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Επιβολή TKIP και CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Προώθηση κίνησης DHCP"
-
-msgid "Forward broadcast traffic"
-msgstr "Προώθηση κίνησης broadcast"
-
-msgid "Forwarding mode"
-msgstr "Μέθοδος προώθησης"
-
-msgid "Fragmentation Threshold"
-msgstr "Όριο Κατακερµατισµού"
-
-msgid "Frame Bursting"
-msgstr "Bursting Πλαισίων"
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr "Ελεύθερος χώρος"
-
-msgid "Frequency Hopping"
-msgstr "Frequency Hopping"
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr "Πύλη"
-
-msgid "Gateway ports"
-msgstr "Θύρες πύλης"
-
-msgid "General Settings"
-msgstr "Γενικές Ρυθμίσεις"
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr "Μετάβαση στη σχετική σελίδα ρυθμίσεων"
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr "Κρέμασμα"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Εδώ μπορείτε να παραμετροποιήσετε βασικές πλευρές της συσκευής σας όπως το "
-"όνομα υπολογιστή ή τη ζώνη ώρας."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Κρυφό <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Καταχωρήσεις Υπολογιστών"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"<abbr title=\"Internet Protocol Address\">IP</abbr> Υπολογιστή ή Δικτύου"
-
-msgid "Hostname"
-msgstr "Όνομα Υπολογιστή"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr "Ονόματα Υπολογιστών"
-
-msgid "IP address"
-msgstr "Διεύθυνση IP"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "IPv4 Τείχος Προστασίας"
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr "Διεύθυνση IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 και IPv6"
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr "Πύλη IPv4"
-
-msgid "IPv4 netmask"
-msgstr "Μάσκα IPv4"
-
-msgid "IPv4 only"
-msgstr "Μόνο IPv4"
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr "IPv4-Διεύθυνση"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "IPv6 Τείχος Προστασίας"
-
-msgid "IPv6 WAN Status"
-msgstr "Κατάσταση IPv6 WAN"
-
-msgid "IPv6 address"
-msgstr "Διεύθυνση IPv6"
-
-msgid "IPv6 gateway"
-msgstr "Πύλη IPv6"
-
-msgid "IPv6 only"
-msgstr "Μόνο IPv6"
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-in-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Ταυτότητα"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Αν οριστεί, προσάρτησε τη συσκευή με βάση το UUID της αντί για το "
-"καθορισμένο όνομα της"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Αν οριστεί, προσάρτησε τη συσκευή με βάση την ετικέτα της αντί για το "
-"καθορισμένο όνομα της"
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Αν η φυσική μνήμη δεν είναι αρκετή, μη-χρησιμοποιούμενα δεδομένα μπορούν "
-"προσωρινά να εναλλάσσονται σε μία συσκευή swap με αποτέλεσμα περισσότερη "
-"ενεργή <abbr title=\"Random Access Memory\">RAM</abbr>. Η εναλλαγή δεδομένων "
-"είναι μία πολύ αργή διαδικασία αφού η συσκευή swap δεν μπορεί να "
-"προσπελαστεί με τους υψηλούς ρυθμούς μεταφοράς δεδομένων που διαθέτει η "
-"<abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr "Αγνόησε διεπαφή"
-
-msgid "Ignore resolve file"
-msgstr "Αγνόησε αρχείο resolve"
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr "Είσοδος"
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr "Πληροφορίες"
-
-msgid "Initscript"
-msgstr "Σενάριο εκκίνησης"
-
-msgid "Initscripts"
-msgstr "Σενάρια Εκκίνησης"
-
-msgid "Install"
-msgstr "Εγκατάσταση"
-
-msgid "Install package %q"
-msgstr "Εγκατάσταση πακέτου %q"
-
-msgid "Install protocol extensions..."
-msgstr "Εγκατάσταση επεκτάσεων πρωτοκόλλου..."
-
-msgid "Installed packages"
-msgstr "Εγκατεστημένα πακέτα"
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid "Interface Configuration"
-msgstr "Παραμετροποίηση Διεπαφής"
-
-msgid "Interface Overview"
-msgstr "Επισκόπηση Διεπαφής"
-
-msgid "Interface is reconnecting..."
-msgstr "Η διεπαφή επανασυνδέεται..."
-
-msgid "Interface is shutting down..."
-msgstr "Η διεπαφή απενεργοποιείται..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Η διεπαφή δεν υπάρχει ή δεν έχει συνδεθεί ακόμη."
-
-msgid "Interface reconnected"
-msgstr "Η διεπαφή επανασυνδέθηκε"
-
-msgid "Interface shut down"
-msgstr "Η διεπαφή απενεργοποιήθηκε"
-
-msgid "Interfaces"
-msgstr "Διεπαφές"
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr "Άκυρη τιμή εισόδου"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Άκυρο όνομα χρήστη και/ή κωδικός πρόσβασης! Παρακαλώ προσπαθήστε ξανά."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Φαίνεται πως προσπαθείτε να φλασάρετε μια εικόνα που δεν χωράει στην μνήμη "
-"flash, παρακαλώ επιβεβαιώστε το αρχείο εικόνας!"
-
-msgid "Java Script required!"
-msgstr "Απαιτείται Javascript!"
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr "Διατήρηση ρυθμίσεων"
-
-msgid "Kernel Log"
-msgstr "Καταγραφή Πυρήνα"
-
-msgid "Kernel Version"
-msgstr "Έκδοση Πυρήνα"
-
-msgid "Key"
-msgstr "Κλειδί"
-
-msgid "Key #%d"
-msgstr "Κλειδί #%d"
-
-msgid "Kill"
-msgstr "Σκότωμα"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Ετικέτα"
-
-msgid "Language"
-msgstr "Γλώσσα"
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr "Αρχείο Leases"
-
-msgid "Leasetime"
-msgstr "Χρόνος Lease"
-
-msgid "Leasetime remaining"
-msgstr "Υπόλοιπο χρόνου Lease"
-
-msgid "Leave empty to autodetect"
-msgstr "Αφήστε το κενό για να γίνει αυτόματη ανίχνευση"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Αφήστε το κενό για να γίνει χρήση της τρέχουσας διεύθυνσης WAN"
-
-msgid "Legend:"
-msgstr "Υπόμνημα:"
-
-msgid "Limit"
-msgstr "Όριο"
-
-msgid "Link On"
-msgstr "Αναμμένο με Ζεύξη"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "Φόρτος"
-
-msgid "Load Average"
-msgstr "Μέσος όρος φόρτου"
-
-msgid "Loading"
-msgstr "Φόρτωση"
-
-msgid "Local IPv4 address"
-msgstr "Τοπική διεύθυνση IPv4"
-
-msgid "Local IPv6 address"
-msgstr "Τοπική διεύθυνση IPv6"
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Τοπική Ώρα"
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr "Τοπικός εξυπηρετητής"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr "Τοπικά ερωτήματα"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Κλειδωμένο στο κανάλι %d που χρησιμοποιείται απ' το %s"
-
-msgid "Log output level"
-msgstr "Επίπεδο εξόδου αρχείων καταγραφής"
-
-msgid "Log queries"
-msgstr "Καταγραφή ερωτημάτων"
-
-msgid "Logging"
-msgstr "Καταγραφή"
-
-msgid "Login"
-msgstr "Σύνδεση"
-
-msgid "Logout"
-msgstr "Αποσύνδεση"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr "MAC-Διεύθυνση"
-
-msgid "MAC-Address Filter"
-msgstr "Φίλτρο MAC Διευθύνσεων"
-
-msgid "MAC-Filter"
-msgstr "MAC-Φίλτρο"
-
-msgid "MAC-List"
-msgstr "Λίστα MAC"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Μέγιστος Ρυθμός"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Μέγιστος επιτρεπόμενος αριθμός ενεργών DHCP leases"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Μέγιστος επιτρεπόμενος αριθμός ταυτόχρονων ερωτημάτων DNS"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Μέγιστο επιτρεπόμενο μέγεθος EDNS.0 UDP πακέτων"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-"Μέγιστος αριθμός δευτερολέπτων αναμονής ώστε το modem να καταστεί έτοιμο"
-
-msgid "Maximum hold time"
-msgstr "Μέγιστος χρόνος κράτησης"
-
-msgid "Maximum number of leased addresses."
-msgstr "Μέγιστος αριθμός διευθύνσεων lease"
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Μνήμη"
-
-msgid "Memory usage (%)"
-msgstr "Χρήση Μνήμης (%)"
-
-msgid "Metric"
-msgstr "Μέτρο"
-
-msgid "Minimum Rate"
-msgstr "Ελάχιστος Ρυθμός"
-
-msgid "Minimum hold time"
-msgstr "Ελάχιστος χρόνος κράτησης"
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Λειτουργία"
-
-msgid "Modem device"
-msgstr "Συσκευή Modem"
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr "Παρακολούθηση"
-
-#, fuzzy
-msgid "Mount Entry"
-msgstr "Προσάρτηση"
-
-msgid "Mount Point"
-msgstr "Σημείο Προσάρτησης"
-
-msgid "Mount Points"
-msgstr "Σημεία Προσάρτησης"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Σημεία Προσάρτησης - Είσοδος Προσάρτησης"
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Τα σημεία προσάρτησης ορίζουν σε ποιο σημείο στο σύστημα αρχείων θα "
-"προσαρτηθεί μία συσκευή μνήμης"
-
-msgid "Mount options"
-msgstr "Επιλογές προσάρτησης"
-
-msgid "Mount point"
-msgstr "Σημείο προσάρτησης"
-
-msgid "Mounted file systems"
-msgstr "Προσαρτημένα συστήματα αρχείων"
-
-msgid "Move down"
-msgstr "Μετακίνηση κάτω"
-
-msgid "Move up"
-msgstr "Μετακίνηση πάνω"
-
-msgid "Multicast Rate"
-msgstr "Ρυθμός Multicast"
-
-msgid "Multicast address"
-msgstr "Διεύθυνση Multicast"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Όνομα"
-
-msgid "Name of the new interface"
-msgstr "Όνομα νέας διεπαφής"
-
-msgid "Name of the new network"
-msgstr "Όνομα νέου δικτύου"
-
-msgid "Navigation"
-msgstr "Πλοήγηση"
-
-msgid "Netmask"
-msgstr "Μάσκα δικτύου"
-
-msgid "Network"
-msgstr "Δίκτυο"
-
-msgid "Network Utilities"
-msgstr "Εργαλεία Δικτύου"
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr "Επόμενο »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Δεν υπάρχει ρυθμισμένος DHCP εξυπηρετητής για αυτή τη διεπαφή"
-
-msgid "No chains in this table"
-msgstr "Δεν υπάρχουν αλυσίδες σε αυτόν τον πίνακα"
-
-msgid "No files found"
-msgstr "Δε βρέθηκαν αρχεία"
-
-msgid "No information available"
-msgstr "Δεν υπάρχουν πληροφορίες διαθέσιμες"
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr "Δεν υπάρχει παραμετροποιημένο δίκτυο σε αυτή τη συσκευή"
-
-msgid "No network name specified"
-msgstr "Δεν έχει οριστεί όνομα δικτύου"
-
-msgid "No package lists available"
-msgstr "Δεν υπάρχουν διαθέσιμες λίστες πακέτων"
-
-msgid "No password set!"
-msgstr "Δεν έχει οριστεί κωδικός πρόσβασης!"
-
-msgid "No rules in this chain"
-msgstr "Δεν υπάρχει κανόνας σε αυτή την αλυσίδα"
-
-msgid "No zone assigned"
-msgstr "Δεν έχει ανατεθεί ζώνη"
-
-msgid "Noise"
-msgstr "Θόρυβος"
-
-msgid "Noise:"
-msgstr "Θόρυβος:"
-
-msgid "None"
-msgstr "Κανένα"
-
-msgid "Normal"
-msgstr "Φυσιολογικό"
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr "Σημείωση: Τα αρχεία παραμετροποίησης θα διαγραφούν."
-
-msgid "Notice"
-msgstr "Επισήμανση"
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "Εντάξει"
-
-msgid "OPKG-Configuration"
-msgstr "Παραμετροποίηση OPKG"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Σε αυτή τη σελίδα μπορείτε να ρυθμίσετε τις διεπαφές δικτύου. Μπορείτε να "
-"γεφυρώσετε πολλαπλές διεπαφές τικάροντας το πεδίο \"γεφύρωμα διεπαφών\" και "
-"εισάγοντας τα ονόματα των διεπαφών δικτύου χωρισμένα με κενά. Μπορείτε "
-"επίσης να χρησιμοποιήσετε παράσταση τύπου <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr> <samp>INTERFACE.VLANNR</samp> (<abbr title="
-"\"παραδείγματος χάριν\">π.χ.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Ένα ή περισσότερα πεδία περιέχουν μη έγκυρες τιμές!"
-
-msgid "One or more required fields have no value!"
-msgstr "Ένα ή περισσότερα πεδία δεν περιέχουν τιμές!"
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr "Η επιλογή άλλαξε"
-
-msgid "Option removed"
-msgstr "Η επιλογή αφαιρέθηκε"
-
-msgid "Options"
-msgstr "Επιλογές"
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr "Έξοδος"
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr "Εξωτερικά Κανάλια"
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "Επισκόπηση"
-
-msgid "Owner"
-msgstr "Κάτοχος"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "Ενθυλάκωση PPPoA"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "Απαιτείται το πακέτο libiwinfo!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Οι λίστες πακέτων έχουν να ανανεωθούν πάνω από 24 ώρες"
-
-msgid "Package name"
-msgstr "Όνομα πακέτου"
-
-msgid "Packets"
-msgstr "Πακέτα"
-
-msgid "Part of zone %q"
-msgstr "Μέρος της ζώνης %q"
-
-msgid "Password"
-msgstr "Κωδικός Πρόσβασης"
-
-msgid "Password authentication"
-msgstr "Εξουσιοδότηση με κωδικό πρόσβασης"
-
-msgid "Password of Private Key"
-msgstr "Κωδικός Πρόσβασης του Ιδιωτικού Κλειδιού"
-
-msgid "Password successfully changed!"
-msgstr "Ο κωδικός πρόσβασης άλλαξε επιτυχώς!"
-
-msgid "Path to CA-Certificate"
-msgstr "Διαδρομή για Πιστοποιητικό CA"
-
-msgid "Path to Client-Certificate"
-msgstr "Διαδρομή για Πιστοποιητικό-Πελάτη"
-
-msgid "Path to Private Key"
-msgstr "Διαδρομή για Ιδιωτικό Κλειδί"
-
-msgid "Path to executable which handles the button event"
-msgstr "Διαδρομή για το εκτελέσιμο που χειρίζεται το γεγονός του κουμπιού"
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr "Εκτέλεση επανεκκίνησης"
-
-msgid "Perform reset"
-msgstr "Διενέργεια αρχικοποίησης"
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr "Πκτ."
-
-msgid "Please enter your username and password."
-msgstr "Παρακαλώ εισάγετε όνομα χρήστη και κωδικό πρόσβασης."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Παρακαλώ περιμένετε: Η συσκευή επανεκκινεί..."
-
-msgid "Policy"
-msgstr "Πολιτική"
-
-msgid "Port"
-msgstr "Θύρα"
-
-msgid "Port %d"
-msgstr "Θύρα %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-#, fuzzy
-msgid "Prevents client-to-client communication"
-msgstr "Αποτρέπει την επικοινωνία μεταξύ πελατών"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Συνέχεια"
-
-msgid "Processes"
-msgstr "Εργασίες"
-
-msgid "Prot."
-msgstr "Πρωτ."
-
-msgid "Protocol"
-msgstr "Πρωτόκολλο"
-
-msgid "Protocol family"
-msgstr "Οικογένεια πρωτοκόλλου"
-
-msgid "Protocol of the new interface"
-msgstr "Πρωτόκολλο νέας διεπαφής"
-
-msgid "Protocol support is not installed"
-msgstr "Η υποστήριξη πρωτοκόλλου δεν έχει εκγατασταθεί"
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Ψευδό Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr "Όριο RTS/CTS"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Διάβασμα του <code>/etc/ethers</code> για την παραμετροποίηση του "
-"εξυπηρετητή <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr "Αρχικοποίηση όλων των αλλαγών;"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr "Αλλαγή πρωτοκόλλου;"
-
-msgid "Realtime Connections"
-msgstr "Συνδέσεις πραγματικού χρόνου"
-
-msgid "Realtime Graphs"
-msgstr "Γραφήματα πραγματικού χρόνου"
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr "Κίνηση πραγματικού χρόνου"
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Επανεκκίνηση"
-
-msgid "Rebooting..."
-msgstr "Επανεκκίνηση..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Επανεκκίνηση του λειτουργικού συστήματος της συσκευής σας"
-
-msgid "Receive"
-msgstr "Λήψη"
-
-msgid "Receiver Antenna"
-msgstr "Κεραία Λήψης"
-
-msgid "Reconnect this interface"
-msgstr "Επανασύνδεση της διεπαφής"
-
-msgid "Reconnecting interface"
-msgstr "Επανασύνδεση της διεπαφής"
-
-msgid "References"
-msgstr "Αναφορές"
-
-msgid "Regulatory Domain"
-msgstr "Ρυθμιστική Περιοχή"
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr "Απομακρυσμένη διεύθυνση IPv4"
-
-msgid "Remove"
-msgstr "Αφαίρεση"
-
-msgid "Repeat scan"
-msgstr "Επανάληψη σάρωσης"
-
-msgid "Replace entry"
-msgstr "Αντικατάσταση καταχώρησης"
-
-msgid "Replace wireless configuration"
-msgstr "Αντικατάσταση ρυθμίσεων ασύρματης σύνδεσης"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Αρχικοποίηση"
-
-msgid "Reset Counters"
-msgstr "Αρχικοποίηση Μετρητών"
-
-msgid "Reset to defaults"
-msgstr "Αρχικοποίηση στις προεπιλεγμένες τιμές"
-
-msgid "Resolv and Hosts Files"
-msgstr "Αρχεία Resolv και Hosts"
-
-msgid "Resolve file"
-msgstr "Αρχείο Resolve"
-
-msgid "Restart"
-msgstr "Επανεκκίνηση"
-
-msgid "Restart Firewall"
-msgstr "Επανεκκίνηση Τείχους Προστασίας"
-
-msgid "Restore backup"
-msgstr "Επαναφορά αντιγράφου ασφαλείας"
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr "Αναίρεση"
-
-msgid "Root"
-msgstr "Root"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Κατάλογος Root για αρχεία που σερβίρονται μέσω TFTP"
-
-msgid "Router Model"
-msgstr "Μοντέλο Δρομολογητή"
-
-msgid "Router Name"
-msgstr "Όνομα Δρομολογητή"
-
-msgid "Router Password"
-msgstr "Κωδικός Πρόσβασης Δρομολογητή"
-
-#, fuzzy
-msgid "Routes"
-msgstr "Διαδρομές"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Οι διαδρομές ορίζουν τη διεπαφή και πύλη από την οποία κάποιος υπολογιστής ή "
-"δίκτυο μπορεί να είναι προσβάσιμο/ς."
-
-msgid "Rule #"
-msgstr "Κανόνας #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "Εκτέλεση ελέγχου του συστήματος αρχείων πριν προσαρτηθεί η συσκευή"
-
-msgid "Run filesystem check"
-msgstr "Εκτέλεση ελέγχου συστήματος αρχείων"
-
-msgid "SSH Access"
-msgstr "Πρόσβαση SSH"
-
-msgid "SSH-Keys"
-msgstr "Κλειδιά SSH"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Αποθήκευση"
-
-msgid "Save & Apply"
-msgstr "Αποθήκευση & Εφαρμογή"
-
-msgid "Save &#38; Apply"
-msgstr "Αποθήκευση &#38; Εφαρμογή"
-
-msgid "Scan"
-msgstr "Σάρωση"
-
-msgid "Scheduled Tasks"
-msgstr "Προγραμματισμένες Εργασίες"
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr "Δείτε το manpage του \"mount\" για λεπτομέρειες"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-#, fuzzy
-msgid "Separate Clients"
-msgstr "Απομόνωση Πελατών"
-
-msgid "Separate WDS"
-msgstr "Ξεχωριστά WDS"
-
-msgid "Server Settings"
-msgstr "Ρυθμίσεις Εξυπηρετητή"
-
-msgid "Service Name"
-msgstr "Όνομα Υπηρεσίας"
-
-msgid "Service Type"
-msgstr "Είδος Υπηρεσίας"
-
-msgid "Services"
-msgstr "Υπηρεσίες"
-
-msgid "Setup DHCP Server"
-msgstr "Ρύθμιση Εξυπηρετητή DHCP"
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr "Απενεργοποίηση αυτής της διεπαφής"
-
-msgid "Shutdown this network"
-msgstr "Απενεργοποίηση αυτού του δικτύου"
-
-msgid "Signal"
-msgstr "Σήμα"
-
-msgid "Signal:"
-msgstr "Σήμα:"
-
-msgid "Size"
-msgstr "Μέγεθος"
-
-msgid "Skip"
-msgstr "Παράκαμψη"
-
-msgid "Skip to content"
-msgstr "Παράκαμψη σε περιεχόμενο"
-
-msgid "Skip to navigation"
-msgstr "Παράκαμψη σε πλοήγηση"
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr "Λογισμικό"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Κάποια πεδία δεν είναι έγκυρα, δεν μπορούν να αποθηκευτούν οι τιμές!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr "Ταξινόμηση"
-
-msgid "Source"
-msgstr "Πηγή"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-#, fuzzy
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-"Προσδιορίζει την θύρα ακρόασης αυτού του στιγμιοτύπου <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr "Ορίστε το κρυφό κλειδί κρυπτογράφησης."
-
-msgid "Start"
-msgstr "Αρχή"
-
-msgid "Start priority"
-msgstr "Προτεραιότητα εκκίνησης"
-
-msgid "Startup"
-msgstr "Εκκίνηση"
-
-msgid "Static IPv4 Routes"
-msgstr "Στατικές Διαδρομές IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Στατικές Διαδρομές IPv6"
-
-msgid "Static Leases"
-msgstr "Στατικά Leases"
-
-msgid "Static Routes"
-msgstr "Στατικές Διαδρομές"
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr "Στατική διεύθυνση"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Κατάσταση"
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr "Αυστηρή σειρά"
-
-msgid "Submit"
-msgstr "Υποβολή"
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr "Switch"
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr "Συγχρονισμός..."
-
-msgid "System"
-msgstr "Σύστημα"
-
-msgid "System Log"
-msgstr "Καταγραφή Συστήματος"
-
-msgid "System Properties"
-msgstr "Ιδιότητες Συστήματος"
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Ρυθμίσεις TFTP"
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr "Πίνακας"
-
-msgid "Target"
-msgstr "Στόχος"
-
-msgid "Terminate"
-msgstr "Τερματισμός"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Οι επιτρεπόμενοι χαρακτήρες είναι: <code>A-Z</code>, <code>a-z</code>, "
-"<code>0-9</code> και <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"Το αρχείο συσκευής της μνήμης ή του διαμέρισματος (<abbr title="
-"\"παραδείγματος χάρην\">π.χ.</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Το σύστημα αρχείων που χρησιμοποιήθηκε για διαμόρφωση (<abbr title="
-"\"παραδείγματος χάρην\">π.χ.</abbr> <samp><abbr title=\"Third Extended "
-"Filesystem\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr "Οι παρακάτω αλλαγές έχουν υποβληθεί"
-
-msgid "The following changes have been reverted"
-msgstr "Οι παρακάτω αλλαγές έχουν αναιρεθεί"
-
-msgid "The following rules are currently active on this system."
-msgstr "Οι παρακάτω κανόνες είναι αυτή τη στιγμή ενεργοί σε αυτό το σύστημα."
-
-msgid "The given network name is not unique"
-msgstr "Το παρεχόμενο όνομα δικτύου δεν είναι μοναδικό"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"Το σύστημα φλασάρετε τώρα.<br /> ΜΗ ΣΒΗΣΕΤΕ ΤΗΝ ΣΥΣΚΕΥΗ!<br /> Περιμένετε "
-"λίγα λεπτά για να δοκιμάσετε επανασύνδεση. Ανάλογα με τις ρυθμίσεις σας, "
-"είναι πιθανό να χρειαστεί να ανανεώσετε την διεύθυνση του υπολογιστή σας για "
-"να αποκτήσετε ξανά πρόσβαση στη συσκευή."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"Η εικόνα που ανεβάσατε δεν περιέχει κάποια υποστηριζόμενη μορφή. Βεβαιωθείτε "
-"ότι επιλέξατε την γενική μορφή εικόνας για την πλατφόρμα σας."
-
-msgid "There are no active leases."
-msgstr "Δεν υπάρχουν ενεργά leases."
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Αυτός είναι ο μόνος <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> στο τοπικό δίκτυο"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Αυτό είναι το crontab του συστήματος στο οποίο μπορούν να οριστούν "
-"προγραμματισμένες εργασίες."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Αυτή η λίστα δίνει μία εικόνα των τρέχοντων εργασιών συστήματος και της "
-"κατάστασής τους."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Αυτή η σελίδα δίνει μία εικόνα για τις τρέχουσες ενεργές συνδέσεις δικτύου."
-
-msgid "This section contains no values yet"
-msgstr "Αυτό το τμήμα δεν περιέχει τιμές ακόμη"
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Ζώνη ώρας"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr "Διαθέσιμο Συνολικά"
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "Κίνηση"
-
-msgid "Transfer"
-msgstr "Μεταφέρθηκαν"
-
-msgid "Transmission Rate"
-msgstr "Ρυθμός Εκπομπής"
-
-msgid "Transmit"
-msgstr "Εκπομπή"
-
-msgid "Transmit Power"
-msgstr "Ισχύς Εκπομπής"
-
-msgid "Transmitter Antenna"
-msgstr "Κεραία Εκπομπής"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr "Διεπαφή Τούνελ"
-
-msgid "Turbo Mode"
-msgstr "Λειτουργία Turbo"
-
-msgid "Tx-Power"
-msgstr "Ισχύς Εκπομπής"
-
-msgid "Type"
-msgstr "Τύπος"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "Συσκευή USB"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr "Άγνωστο"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Άγνωστο Λάθος. ο κωδικός πρόσβασης δεν άλλαξε!"
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Μη-αποθηκευμένες Αλλαγές"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr "Το Αρχείο Ανέβηκε"
-
-msgid "Uptime"
-msgstr "Χρόνος εν λειτουργία"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Χρήση <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Χρήση πύλης DHCP"
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr "Χρήση προεπιλεγμένης πύλης"
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Σε χρήση"
-
-msgid "Used Key Slot"
-msgstr "Χρησιμοποιούμενη Υποδοχή Κλειδιού"
-
-msgid "Username"
-msgstr "Όνομα Χρήστη"
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr "Διεπαφή VLAN"
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr "Εξυπηρετητής VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "Έκδοση"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr "Μοιραζόμενο κλειδί WEP"
-
-msgid "WEP passphrase"
-msgstr "Κωδική φράση WEP"
-
-msgid "WMM Mode"
-msgstr "Υποστήριξη WMM"
-
-msgid "WPA passphrase"
-msgstr "Κωδική φράση WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr "Προειδοποίηση"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Προειδοποίηση: Υπάρχουν μη-αποθηκευμένες αλλαγές που θα χαθούν κατά την "
-"επανεκκίνηση!"
-
-msgid "Wifi"
-msgstr "Ασύρματο"
-
-msgid "Wireless"
-msgstr "Ασύρματο"
-
-msgid "Wireless Adapter"
-msgstr "Ασύρματος Προσαρμογέας"
-
-msgid "Wireless Network"
-msgstr "Ασύρματο Δίκτυο"
-
-msgid "Wireless Overview"
-msgstr "Επισκόπηση Ασύρματου Δικτύου"
-
-msgid "Wireless Security"
-msgstr "Ασφάλεια Ασύρματου Δικτύου"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Το ασύρματο δίκτυο είναι απενεργοποιημένο ή μη συνδεδεμένο"
-
-msgid "Wireless is restarting..."
-msgstr "Το ασύρματο δίκτυο επανεκκινείται..."
-
-msgid "Wireless network is disabled"
-msgstr "Το ασύρματο δίκτυο είναι ανενεργό"
-
-msgid "Wireless network is enabled"
-msgstr "Το ασύρματο δίκτυο είναι ενεργό"
-
-msgid "Wireless restarted"
-msgstr "Το ασύρματο δίκτυο επανεκκινήθηκε"
-
-msgid "Wireless shut down"
-msgstr "Το ασύρματο δίκτυο τερματίστηκε"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Καταγραφή των ληφθέντων DNS αιτήσεων στο syslog"
-
-msgid "XR Support"
-msgstr "Υποστήριξη XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Μπορείτε να ενεργοποιήσετε ή να απενεργοποιήσετε σενάρια εκκίνησης εδώ. Οι "
-"αλλαγές θα εφαρμοστούν αφού επανεκκινήσετε τη συσκευή.<br /"
-"><strong>Προειδοποίηση: Αν απενεργοποιήσετε απαραίτητα σενάρια εκκίνησης "
-"όπως το \"network\", η συσκευή σας μπορεί να καταστεί μη-προσβάσιμη!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr "αυτόματα"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-#, fuzzy
-msgid "creates a bridge over specified interface(s)"
-msgstr "δημιουργεί μία γέφυρα μεταξύ των ορισμένων διεπαφών"
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "ανενεργό"
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"αρχείο όπου θα αποθηκεύονται τα Leases του <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>"
-
-msgid "forward"
-msgstr "προώθηση"
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "βοήθεια"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "αν ο στόχος είναι ένα δίκτυο"
-
-msgid "input"
-msgstr "είσοδος"
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "τοπικό αρχείο <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "no"
-msgstr "όχι"
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "κανένα"
-
-msgid "off"
-msgstr "κλειστό"
-
-msgid "on"
-msgstr "ανοιχτό"
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr "απεριόριστα"
-
-msgid "unspecified"
-msgstr "μη-καθορισμένο"
-
-msgid "unspecified -or- create:"
-msgstr "μη-καθορισμένο -ή- δημιουργείστε:"
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr "ναι"
-
-msgid "« Back"
-msgstr "« Πίσω"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Αναμονή για δρομολογητή..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Ενεργοποίηση ενσωματωμένου εξυπηρετητή NTP"
-
-#~ msgid "Active Leases"
-#~ msgstr "Ενεργά Leases"
-
-#~ msgid "Open"
-#~ msgstr "Άνοιγμα"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Ρυθμός Δεδομένων"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Παραμετροποίηση / Εφαρμογή"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Παραμετροποίηση / Αλλαγές"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Παραμετροποίηση / Επαναφορά"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "Διεύθυνση MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">Κρυπτ.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "Σάρωση <abbr title=\"Wireless Local Area Network\">WLAN</abbr>"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Επιλέξατε το δίκτυο που επιθυμείτε να προσαρτήσετε σε αυτήν την ασύρματη "
-#~ "διεπαφή. Επιλέξτε <em>απροσδιόριστο</em> για να μην προσαρτηθεί "
-#~ "οποιοδήποτε ή συμπληρώστε το πεδίο <em>δημιουργία</em> για να "
-#~ "προσδιορίσετε ένα νέο δίκτυο."
-
-#~ msgid "Create Network"
-#~ msgstr "Δημιουργία Δικτύου"
-
-#~ msgid "Link"
-#~ msgstr "Ζεύξη"
-
-#~ msgid "Networks"
-#~ msgstr "Δίκτυα"
-
-#~ msgid "Power"
-#~ msgstr "Ισχύς"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Τοπικά Ασύρματα δίκτυα"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "Παράσταση <abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>: "
-#~ "διεύθυνση/πρόθεμα"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "Εξυπηρετητής <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Διεύθυνση <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Διαχείριση IPv6"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Σημείωση: Εάν επιλέξετε μια διεπαφή εδώ η οποία είναι μέρος ενός άλλου "
-#~ "δικτύου, θα μετακινηθεί σε αυτό το δίκτυο."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Οι πόρτες δικτύου του δρομολογητή σας μπορούν να συνδυαστούν σε πολλά "
-#~ "<abbr title=\"Virtual Local Area Network\">VLAN</abbr>s όπου οι "
-#~ "υπολογιστές να επικοινωνούν απευθείας μεταξύ τους. Τα <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s συχνά χρησιμοποιούνται για να "
-#~ "διαχωρίσουν διαφορετικά τμήματα του δικτύου. Συχνά υπάρχει μία "
-#~ "προεπιλεγμένη πόρτα Uplink για σύνδεση με ένα μεγαλύτερο δίκτυο όπως το "
-#~ "internet και άλλες πόρτες για σύνδεση με το τοπικό δίκτυο."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Ενεργοποίηση buffering"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6-over-IPv4"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Αρχεία που θα διατηρηθούν κατά το φλασάρισμα του firmware"
-
-#~ msgid "General"
-#~ msgstr "Γενικά"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Εδώ μπορείτε να προσαρμόσετε τις ρυθμίσεις και την λειτουργία του <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Ενέργειες μετά το commit"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Αυτές οι εντολές θα εκτελεστούν αυτόματα όταν μία ρύθμιση <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> γίνει commit επιτρέποντας "
-#~ "τις αλλαγές να εφαρμόζονται ακαριαία."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "Εξυπηρετητής <abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Σημείο πρόσβασης (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Επιπλέον επιλογές pppd"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Αυτόματη Αποσύνδεση"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Αρχείο αντιγράφων ασφαλείας"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Ρύθμιση του τοπικού εξυπηρετητή DNS να χρησιμοποιεί τους εξυπηρετητές "
-#~ "ονόματος που διαφημίζει ο ομότιμος PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Σενάριο σύνδεσης"
-
-#~ msgid "Create backup"
-#~ msgstr "Δημιουργία αντίγραφου ασφαλείας"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Σενάριο αποσύνδεσης"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Επεξεργασία λίστας πακέτων και προορισμών εγκατάστασης"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Ενεργοποίηση IPv6 σε ζεύξη PPP"
-
-#~ msgid "Firmware image"
-#~ msgstr "Εικόνα firmware"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Εδώ μπορείτε να κρατήσετε και να επαναφέρετε αντίγραφα ασφαλείας των "
-#~ "παραμέτρων του δρομολογητή σας και - αν είναι δυνατόν - να επαναφέρετε "
-#~ "τον δρομολογητή στις προεπιλεγμένες ρυθμίσεις."
-
-#~ msgid "Installation targets"
-#~ msgstr "Προορισμοί εγκατάστασης"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Διατήρηση αρχείων παραμετροποίησης"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Το pppd να αντικαθιστά την τρέχουσα προεπιλεγμένη διαδρομή για να "
-#~ "χρησιμοποιείται η διεπαφή PPP μετά από επιτυχημένη σύνδεση"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "Το pppd να τρέχει αυτό το σενάριο όταν η ζεύξη PPP εγκαθιδρύεται"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Το pppd να τρέχει αυτό το σενάριο πριν η ζεύξη PPP κλείσει"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Εξασφαλίστε ότι δηλώνετε το σωστό κωδικό pin εδώ αλλιώς μπορεί να "
-#~ "κλειδώσετε την κάρτα sim σας!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "Οι περισσότεροι είναι εξυπηρετητές δικτύου που προσφέρουν κάποιες "
-#~ "συγκεκριμένες υπηρεσίες για την συσκευή ή το δίκτυο σας όπως πρόσβαση στο "
-#~ "κέλυφος, υπηρεσίες ιστοσελίδων σαν το <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>, δρομολόγηση mesh, αποστολή ηλ. ταχυδρομείου, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Αριθμός αποτυχημένων δοκιμών για την εφαρμογή της αυτόματης επανασύνδεσης"
-
-#~ msgid "PIN code"
-#~ msgstr "Κωδικός PIN"
-
-#~ msgid "Package lists"
-#~ msgstr "Λίστες Πακέτων"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr ""
-#~ "Θέλετε να προχωρήσετε στην αναίρεση όλων των ρυθμίσεων και την επαναφορά "
-#~ "στις προεπιλεγμένες για το firmware;"
-
-#~ msgid "Processor"
-#~ msgstr "Επεξεργαστής"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Θύρα Radius"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Εξυπηρετητής Radius"
-
-#~ msgid "Replace default route"
-#~ msgstr "Αντικατάσταση προεπιλεγμένης διαδρομής"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Επαναφορά δρομολογητή στα προεπιλεγμένα"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Δευτερόλεπτα αναμονής ώστε το modem να προετοιμαστεί πριν την προσπάθεια "
-#~ "για σύνδεση"
-
-#~ msgid "Service type"
-#~ msgstr "Τύπος υπηρεσίες"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr ""
-#~ "Οι υπηρεσίες και οι δαίμονες εκτελούν κάποιες συγκεκριμένες εργασίες στην "
-#~ "συσκευή σας."
-
-#~ msgid "Settings"
-#~ msgstr "Ρυθμίσεις"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Καθορισμός χρόνου αναμονής"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Συγνώμη. Το OpenWrt δεν υποστηρίζει αναβάθμιση συστήματος σε αυτή την "
-#~ "πλατφόρμα.<br /> Χρειάζεται να φλασάρετε την συσκευή σας χειροκίνητα."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Ορισμός επιπλέον επιλογών pppd στην γραμμή εντολών"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "Ο κόμβος συσκευής του modem σας, π.χ. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr ""
-#~ "Χρόνος (σε δευτερόλεπτα) ύστερα από τον οποίο οι αχρησιμοποίητες "
-#~ "συνδέσεις θα κλείνουν"
-
-#~ msgid "Update package lists"
-#~ msgstr "Ενημέρωση λίστας πακέτων"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Ανεβάστε ένα αρχείο εικόνας OpenWrt για να φλασάρετε τη συσκευή."
-
-#~ msgid "Upload image"
-#~ msgstr "Ανέβασμα εικόνας"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Χρήση DNS ομότιμου"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Θα πρέπει να εγκαταστήσετε το \"comgt\" για υποστήριξη UMTS/GPRS, το "
-#~ "\"ppp-mod-pppoe\" για PPPoE, το \"ppp-mod-pppoa\" για PPPoA ή το \"pptp\" "
-#~ "για PPtP"
-
-#~ msgid "back"
-#~ msgstr "πίσω"
-
-#~ msgid "buffered"
-#~ msgstr "ενδιάμεση"
-
-#~ msgid "cached"
-#~ msgstr "λανθάνουσα"
-
-#~ msgid "free"
-#~ msgstr "ελεύθερη"
-
-#~ msgid "static"
-#~ msgstr "στατικό"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "Το <abbr title=\"Lua Configuration Interface\">LuCI</abbr> είναι μία "
-#~ "συλλογή από ελεύθερο λογισμικό Lua που συμπεριλαμβάνει ένα <abbr title="
-#~ "\"Model-View-Controller\">MVC</abbr>-Webframework και ένα περιβάλλον web "
-#~ "για embedded συσκευές. Το <abbr title=\"Lua Configuration Interface"
-#~ "\">LuCI</abbr> έχει άδεια λογισμικού Apache."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "Κλειδιά <abbr title=\"Secure Shell\">SSH</abbr>"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Ένας ελαφρύς εξυπηρετητής web HTTP/1.1 webserver γραμμένος σε C και Lua "
-#~ "και σχεδιασμένος να εξυπηρετεί το LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Ένας μικρός εξυπηρετητής web που μπορεί να χρησιμοποιηθεί για να "
-#~ "εξυπηρετεί το <abbr title=\"Lua Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "Περί"
-
-#~ msgid "Addresses"
-#~ msgstr "Διευθύνσεις"
-
-#~ msgid "Admin Password"
-#~ msgstr "Κωδικός Διαχειριστή"
-
-#~ msgid "Alias"
-#~ msgstr "Ψευδώνυμο"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Realm Εξουσιοδότησης"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Πόρτα Γέφυρας"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Αλλαγή κωδικού πρόσβασης του διαχειριστή του συστήματος (Χρήστης "
-#~ "<code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Πελάτης + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Αρχείο Παραμετροποίησης"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Χρόνος λήξης σύνδεσης"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Συνεισφορές στην Ανάπτυξη"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "Ανάθεση από DHCP"
-
-#~ msgid "Document root"
-#~ msgstr "Ρίζα εγγράφων"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Ενεργοποίηση Keep-Alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Γέφυρα Ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Εδώ μπορείτε να επικολλήσετε δημόσια <abbr title=\"Secure Shell\">SSH</"
-#~ "abbr>-κλειδιά (ένα ανά γραμμή) για εξουσιοδότηση δημόσιου-κλειδιού <abbr "
-#~ "title=\"Secure Shell\">SSH</abbr>."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Ρυθμίσεις IP"
-
-#~ msgid "Interface Status"
-#~ msgstr "Κατάσταση Διεπαφής"
-
-#~ msgid "Lead Development"
-#~ msgstr "Επικεφαλής Ανάπτυξης"
-
-#~ msgid "Master"
-#~ msgstr "Σημείο Πρόσβασης"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Σημείο Πρόσβασης + WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "Μη-ρυθμισμένο"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Ο κωδικός πρόσβασης αλλάχτηκε επιτυχώς"
-
-#~ msgid "Plugin path"
-#~ msgstr "Διαδρομή προσθέτων"
-
-#~ msgid "Ports"
-#~ msgstr "Θύρες"
-
-#~ msgid "Primary"
-#~ msgstr "Κύριο"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Ιστοσελίδα του Πρότζεκτ"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Ψευδό Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Ευχαριστίες"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "Το realm που θα εμφανίζεται κατά την προτροπή για εξουσιοδότηση για τις "
-#~ "προστατευμένες σελίδες."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Άγνωστο Σφάλμα"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "προεπιλεγμένο <code>/etc/httpd.conf</code>"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Η λίστα πακέτων ενημερώθηκε"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Αναβάθμιση εγκατεστημένων πακέτων"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Επίσης εδώ μπορείτε να δείτε τα αρχεία καταγραφής του πυρήνα ή των "
-#~ "υπηρεσιών ώστε να έχετε μια εικόνα για την τρέχουσα κατάσταση."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Εδώ μπορείτε να βρείτε πληροφορίες για την τρέχουσα κατάσταση του "
-#~ "συστήματος όπως την συχνότητα της <abbr title=\"Central Processing Unit"
-#~ "\">CPU</abbr>, τη χρήση μνήμης ή τον όγκο δεδομένων των διεπαφών δικτύου."
-
-#~ msgid "Search file..."
-#~ msgstr "Εύρεση αρχείου..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "Το <abbr title=\"Lua Configuration Interface\">LuCI</abbr> είναι ένα "
-#~ "ελεύθερο, ευέλικτο, και φιλικό προς το χρήστη γραφικό περιβάλλον για την "
-#~ "παραμετροποίηση του OpenWrt Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "Και τώρα διασκεδάστε με τον δρομολογητή σας!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Θέλοντας πάντα να βελτιώνουμε αυτό το περιβάλλον, περιμένουμε την "
-#~ "ανάδραση και τις προτάσεις σας."
-
-#~ msgid "Hello!"
-#~ msgstr "Γεια σας!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Σημείωση: Πριν εφαρμοστούν οι αλλαγές στο <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> πρέπει να επιβεβαιωθούν κλικάροντας το Αλλαγές - "
-#~ "Αποθήκευση &amp; Εφαρμογή."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "Στις επόμενες σελίδες μπορείτε να προσαρμόζετε τις πιο σημαντικές "
-#~ "ρυθμίσεις του δρομολογητή σας."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "Η ομάδα του <abbr title=\"Lua Configuration Interface\">LuCI</abbr>"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Αυτός είναι ο χώρος διαχείρισης του <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Περιβάλλον Χρήστη"
-
-#~ msgid "enable"
-#~ msgstr "ενεργό"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr " (προαιρετικό)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "Θύρα <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "Ο εξυπηρετητής <abbr title=\"Domain Name System\">DNS</abbr> θα ερωτάται "
-#~ "με την σειρά που δηλώνεται στο αρχείο resolv"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"μέγιστα\">μεγ.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "<abbr title=\"μέγιστο\">μεγ.</abbr> μέγεθος πακέτου <abbr title="
-#~ "\"Extension Mechanisms for Domain Name System\">EDNS0</abbr>"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "Απομόνωση AP"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Προσθήκη Ασύρματου δικτύου σε φυσικό δίκτυο"
-
-#~ msgid "Aliases"
-#~ msgstr "Ψευδώνυμα"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Μέγεθος Τμήματος Τεμαχισμού"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Δημιουργία Δικτύου"
-
-#~ msgid "Devices"
-#~ msgstr "Συσκευές"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Να μην προωθούνται αντίστροφες αναζητήσεις για τοπικά δίκτυα"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Ενεργός εξυπηρετητής TFTP"
-
-#~ msgid "Errors"
-#~ msgstr "Λάθη"
-
-#~ msgid "Essentials"
-#~ msgstr "Βασικά"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Ανάπτυξη ονομάτων υπολογιστών"
-
-#~ msgid "First leased address"
-#~ msgstr "Πρώτη διεύθυνση lease"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Επιλύει προβλήματα με μη-προσβάσιμους ιστοχώρους, την υποβολή φορμών ή "
-#~ "άλλες απροσδόκητες συμπεριφορές κάποιων ISP."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Διεύθυνση Υλικού"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Εδώ μπορείτε να ρυθμίσετε τις εγκατεστημένες ασύρματες συσκευές."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Αγνόησε <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Ανεξάρτητο (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Σύνδεση με Διαδίκτυο"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Συμμετοχή (Πελάτης)"
-
-#~ msgid "Leases"
-#~ msgstr "Leases"
-
-#~ msgid "Local Domain"
-#~ msgstr "Τοπικό Όνομα Τομέα"
-
-#~ msgid "Local Network"
-#~ msgstr "Τοπικό Δίκτυο"
-
-#~ msgid "Local Server"
-#~ msgstr "Τοπικός Διακομιστής"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Εικόνα Εκκίνησης Δικτύου"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Όνομα Δικτύου (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Αριθμός διευθύνσεων lease"
-
-#~ msgid "Path"
-#~ msgstr "Διαδρομή"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Εκτέλεση Ενεργειών"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Αποτρέπει την επικοινωνία μεταξύ Πελατών"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Παροχή (Σημείο Πρόσβασης)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Αρχείο Resolv"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Ρίζα εξυπηρετητή TFTP"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Οι παρακάτω αλλαγές έχουν εφαρμοστεί"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Τα παρακάτω αρχεία θα διατηρούνται όταν φλασάρεται το firmware μέσω του "
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>."
-
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "Ασύρματο"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Με τον <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> τα "
-#~ "μέλη του δικτύου μπορούν αυτόματα να λάβουν τις ρυθμίσεις δικτύου τους "
-#~ "(διεύθυνση <abbr title=\"Internet Protocol\">IP</abbr>, μάσκα δικτύου, "
-#~ "εξυπηρετητή <abbr title=\"Domain Name System\">DNS</abbr>, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Μια συσκευή μπορεί να λειτουργεί σε πολλά ασύρματα δίκτυα. Προσοχή όμως "
-#~ "γιατί υπάρχουν κάποιοι περιορισμοί από το υλικό και τον οδηγό. Κανονικά, "
-#~ "μπορούν να λειτουργούν: 1 δίκτυο Ad-Hoc ή μέχρι 3 δίκτυα AP και 1 πελάτη "
-#~ "ταυτόχρονα."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Χρειάζεται να εγκαταστήσετε το \"ppp-mod-pppoe\" για υποστήριξη PPPoE ή "
-#~ "το \"pptp\" για υποστήριξη PPtP"
-
-#~ msgid "additional hostfile"
-#~ msgstr "επιπλέον αρχείο ονομάτων υπολογιστών"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "προσθέτει τα ονόματα τομέα στις καταχωρήσεις του αρχείου resolv"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "στατικό"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "αυτόματη επανασύνδεση"
-
-#~ msgid "concurrent queries"
-#~ msgstr "ταυτόχρονα ερωτήματα"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "απενεργοποίηση <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr> για αυτή τη διεπαφή"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "αποσύνδεση όταν είναι αδρανές για"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "να μην διατηρούνται στην λανθάνουσα μνήμη τα άγνωστα"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "φιλτράρισμα άχρηστων ερωτημάτων <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr> των συστημάτων Windows"
-
-#~ msgid "installed"
-#~ msgstr "εγκατεστημένο"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "επιτρέπει τοπικό όνομα υπολογιστή με βάση το υποδίκτυο του"
-
-#~ msgid "not installed"
-#~ msgstr "μη-εγκατεστημένο"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "αποτρέπει τη διατήρηση των αρνητικών απαντήσεων <abbr title=\"Domain Name "
-#~ "System\">DNS</abbr> στην λανθάνουσα μνήμη"
-
-#~ msgid "query port"
-#~ msgstr "θύρα ερωτημάτων"
-
-#~ msgid "transmitted / received"
-#~ msgstr "απεσταλμένα / ληφθέντα"
-
-#~ msgid "Console Log Level"
-#~ msgstr "Επίπεδο Καταγραφής Τερματικού"
-
-#~ msgid "Log Size"
-#~ msgstr "Μέγεθος Αρχείου Καταγραφής"
-
-#~ msgid "Remote Syslog IP"
-#~ msgstr "Διεύθυνση Απομακρυσμένου Syslog"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "Δίκτυο"
-
-#~ msgid "all"
-#~ msgstr "όλα"
-
-#~ msgid "Code"
-#~ msgstr "Κωδικός"
-
-#~ msgid "Distance"
-#~ msgstr "Απόσταση"
-
-#~ msgid "Legend"
-#~ msgstr "Υπόμνημα"
-
-#~ msgid "Library"
-#~ msgstr "Βιβλιοθήκη"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "βλέπε &#39;%s&#39; manpage"
-
-#~ msgid "Package Manager"
-#~ msgstr "Διαχειριστής Πακέτων"
-
-#~ msgid "Service"
-#~ msgstr "Υπηρεσία"
-
-#~ msgid "Statistics"
-#~ msgstr "Στατιστικά"
-
-#~ msgid "zone"
-#~ msgstr "Ζώνη"
diff --git a/po/el/commands.po b/po/el/commands.po
deleted file mode 100644
index 0e9e65d..0000000
--- a/po/el/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/el/coovachilli.po b/po/el/coovachilli.po
deleted file mode 100644
index 90d693d..0000000
--- a/po/el/coovachilli.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-03-19 15:27+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
-
-#~ msgid "General configuration"
-#~ msgstr "Γενική παραμετροποίηση"
-
-#~ msgid "DHCP configuration"
-#~ msgstr "Παραμετροποίηση DHCP"
-
-#~ msgid "DHCP interface"
-#~ msgstr "Διεπαφή DHCP"
-
-#~ msgid "Enable IEEE 802.1x"
-#~ msgstr "Ενεργοποίηση IEEE 802.1x"
-
-#~ msgid "Admin password"
-#~ msgstr "Κωδικός πρόσβασης διαχειριστή"
-
-#~ msgid "Location name"
-#~ msgstr "Όνομα τοποθεσίας"
-
-#~ msgid "CGI program"
-#~ msgstr "Πρόγραμμα CGI"
-
-#~ msgid "Password"
-#~ msgstr "Κωδικός πρόσβασης"
diff --git a/po/el/ddns.po b/po/el/ddns.po
deleted file mode 100644
index 9512ab9..0000000
--- a/po/el/ddns.po
+++ /dev/null
@@ -1,96 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-03-18 17:08+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Check for changed IP every"
-msgstr "Έλεγχος για αλλαγή IP κάθε"
-
-msgid "Check-time unit"
-msgstr "Μονάδα χρόνου ελέγχου"
-
-msgid "Custom update-URL"
-msgstr "Προσαρμοσμένο URL-ενημέρωσης"
-
-msgid "Dynamic DNS"
-msgstr "Δυναμικό DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Το Δυναμικό DNS επιτρέπει στον δρομολογητή σας να είναι προσβάσιμος μέσω "
-"ενός σταθερού ονόματος υπολογιστή παρόλο που η διεύθυνση IP του μπορεί να "
-"αλλάζει δυναμικά."
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "Εξαναγκασμός ενημέρωσης κάθε"
-
-#, fuzzy
-msgid "Force-time unit"
-msgstr "Μονάδα χρόνου εξαναγκαστικής ενημέρωσης"
-
-msgid "Hostname"
-msgstr "Όνομα υπολογιστή"
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid "Network"
-msgstr "Δίκτυο"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr "Κωδικός πρόσβασης"
-
-msgid "Service"
-msgstr "Υπηρεσία"
-
-#, fuzzy
-msgid "Source of IP address"
-msgstr "Πηγή της διεύθυνσης IP"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Όνομα χρήστη"
-
-msgid "custom"
-msgstr "προσαρμοσμένο"
-
-# Hours
-msgid "h"
-msgstr "ω"
-
-msgid "interface"
-msgstr "διεπαφή"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "λεπτά"
-
-msgid "network"
-msgstr "δίκτυο"
-
-#, fuzzy
-#~ msgid "ddns_service_updateurl"
-#~ msgstr "Προσαρμογή URL ενημέρωσης"
diff --git a/po/el/diag_core.po b/po/el/diag_core.po
deleted file mode 100644
index 8e57c52..0000000
--- a/po/el/diag_core.po
+++ /dev/null
@@ -1,38 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 14:53+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configure Diagnostics"
-msgstr "Ρύθμιση Διαγνωστικών"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Η καταχωρήσεις στο μενού, σας επιτρέπουν να προβαίνετε σε διαγνωστικές "
-"δοκιμές στο σύστημά σας, για την διευκόλυνση αντιμετώπισης προβλημάτων."
-
-#, fuzzy
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Με αυτό το μενού, μπορείτε να παραμετροποιήσετε διαγνωστικά δικτύου, όπως "
-"σαρώσεις συσκευών δικτύου και δοκιμές ping."
diff --git a/po/el/diag_devinfo.po b/po/el/diag_devinfo.po
deleted file mode 100644
index 7a247cb..0000000
--- a/po/el/diag_devinfo.po
+++ /dev/null
@@ -1,209 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-19 15:30+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr "Προσθήκη"
-
-msgid "Beginning of MAC address range"
-msgstr "Αρχή εύρους διευθύνσεων MAC"
-
-msgid "Config Phone Scan"
-msgstr "Ρύθμιση Σάρωσης Τηλεφώνων"
-
-msgid "Configure"
-msgstr "Παραμετροποίηση"
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr "Διαγραφή"
-
-msgid "Device Scan Config"
-msgstr "Ρύθμιση Σάρωσης Συσκευών"
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr "Συσκευές στο Δίκτυο"
-
-msgid "Edit"
-msgstr "Επεξεργασία"
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid "End of MAC address range"
-msgstr "Τέλος εύρους διευθύνσεων MAC"
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr "Διεύθυνση IP"
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid "Invalid"
-msgstr "Μη έγκυρο"
-
-msgid "Link to Device"
-msgstr "Ζεύξη με Συσκευή"
-
-msgid "MAC Address"
-msgstr "Διεύθυνση MAC"
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr "Όνομα"
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr "Δεν υπάρχουν συσκευές SIP"
-
-msgid "No devices detected"
-msgstr "Δεν ανιχνεύτηκαν συσκευές"
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr "Ιδιοκτήτης OUI"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr "Πληροφορίες Τηλεφώνου"
-
-msgid "Phone Scan"
-msgstr "Σάρωση Τηλεφώνων"
-
-msgid "Phone Scanning Configuration"
-msgstr "Παραμετροποίηση Σάρωσης Τηλεφώνων"
-
-msgid "Phones"
-msgstr "Τηλέφωνα"
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr "Ανεπεξέργαστα"
-
-msgid "Repeat Count"
-msgstr "Επανάληψη Μέτρησης"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr "Πληροφορίες Συσκευής SIP"
-
-msgid "SIP Device Scan"
-msgstr "Σάρωση για συσκευές SIP"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Παραμετροποίηση Σάρωσης Συσκευών SIP"
-
-msgid "SIP Devices on Network"
-msgstr "Συσκευές SIP στο Δίκτυο"
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr "Σάρωση για συσκευές σε καθορισμένα δίκτυα."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr "Scans for devices on specified networks."
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr "Υποδίκτυο"
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr "έλεγχος άλλων δικτύων"
diff --git a/po/el/ffwizard.po b/po/el/ffwizard.po
deleted file mode 100644
index fd0e0c4..0000000
--- a/po/el/ffwizard.po
+++ /dev/null
@@ -1,181 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-31 15:37+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Να επιτρέπεται η μεταφορά ανώνυμων στατιστικών αυτού του κόμβου"
-
-msgid "Channel"
-msgstr "Κανάλι"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr "Επιλέξτε για να προστατέψετε το LAN σας από άλλους κόμβους ή πελάτες"
-
-msgid "Configure network"
-msgstr "Παραμετροποίηση δικτύου"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-"Συνδέστε τον κόμβο σας με άλλους κόμβους χρησιμοποιώντας τούνελ μέσω του "
-"διαδικτύου."
-
-msgid "DHCP IP range"
-msgstr "Εύρος DHCP IP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "Το DHCP θα αποδώσει αυτόματα διευθύνσεις ip στους πελάτες"
-
-msgid "DNS Server"
-msgstr "Εξυπηρετητής DNS"
-
-msgid "Enable DHCP"
-msgstr "Ενεργοποίηση DHCP"
-
-msgid "Gateway"
-msgstr "Πύλη"
-
-msgid "Heartbeat"
-msgstr "Καρδιακός Παλμός"
-
-msgid "IP address"
-msgstr "Διεύθυνση IP"
-
-msgid "L2gvpn tunnel"
-msgstr "Τούνελ L2gvpn"
-
-msgid "Limit download bandwidth"
-msgstr "Περιορισμός ταχύτητας κατεβάσματος"
-
-msgid "Limit upload bandwidth"
-msgstr "Περιορισμός ταχύτητας ανεβάσματος"
-
-msgid "Mesh IP address"
-msgstr "IP διεύθυνση πλέγματος"
-
-msgid "Mesh IPv6 Address"
-msgstr "IPv6 Διεύθυνση Δικτύου Πλέγματος"
-
-msgid "Netmask"
-msgstr "Μάσκα δικτύου"
-
-msgid "Password"
-msgstr "Κωδικός πρόσβασης"
-
-msgid "Password confirmation"
-msgstr "Επιβεβαίωση κωδικού πρόσβασης"
-
-msgid "Password successfully changed"
-msgstr "Ο κωδικός πρόσβασης άλλαξε επιτυχώς"
-
-msgid "Protect LAN"
-msgstr "Προστασία LAN"
-
-msgid "Protocol"
-msgstr "Πρωτόκολλο"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Επιλέξτε για να παραμετροποιήσετε τις διεπαφές δικτύου."
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Επιλέξτε για να επιτρέπεται σε άλλους να χρησιμοποιήσουν την σύνδεσή σας για "
-"πρόσβαση στο διαδίκτυο."
-
-msgid "Share your internet connection"
-msgstr "Διαμοιρασμός σύνδεσης διαδικτύου"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Το εύρος IP από το οποίο θα αποδίδονται στους πελάτες διευθύνσεις ip (π.χ. "
-"10.1.2.1/28). Εάν αυτό είναι εύρος εντός του δικτύου πλέγματος, τότε θα "
-"ανακοινώνεται ως HNA. Οποιοδήποτε άλλο εύρος θα χρησιμοποιεί το NAT. Εάν "
-"αφεθεί κενό τότε θα χρησιμοποιηθούν οι ρυθμίσεις από το προφίλ κοινότητας."
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "Η διεύθυνση ipv6 υπολογίζεται αυτόματα."
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-"Το πρωτόκολλο που θα χρησιμοποιήσετε για την διαδικτυακή συνδεσιμότητα. "
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Αυτή είναι μία μοναδική διεύθυνση στο πλέγμα (π.χ 10.1.1.1) και πρέπει να "
-"καταχωρηθεί στην τοπική σας κοινότητα."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Αυτή η επιλογή θα ρυθμίσει μία νέα εικονική ασύρματη διεπαφή σε λειτουργία "
-"Σημείου Πρόσβασης. "
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Αυτός ο οδηγός θα σας βοηθήσει να στήσετε το δρομολογητής σας για το "
-"Freifunk  ή άλλο παρόμοιο δίκτυο."
-
-msgid "Unknown Error"
-msgstr "Άγνωστο Σφάλμα"
-
-msgid "Username"
-msgstr "Όνομα χρήστη"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Εικονικό Σημείο Πρόσβασης (VAP)"
-
-msgid "Wizard"
-msgstr "Οδηγός"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-"Η συσκευή σας και οι γειτονικοί σας κόμβοι πρέπει να χρησιμοποιούν το ίδιο "
-"κανάλι."
-
-msgid "dhcp"
-msgstr "dhcp"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "static"
-msgstr "στατικό"
-
-msgid "Configure this interface."
-msgstr "Παραμετροποίηση αυτής της διεπαφής."
-
-msgid "recommended"
-msgstr "προτεινόμενο"
-
-msgid "Basic settings"
-msgstr "Βασικές ρυθμίσεις"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Οι βασικές ρυθμίσεις είναι ημιτελείς. Παρακαλώ προχωρήστε στο"
-
-msgid "Error"
-msgstr "Σφάλμα"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-"Δεν μπορείτε να χρησιμοποιήσετε τον οδηγό γιατί κάποιες απαραίτητες τιμές "
-"δεν έχουν συμπληρωθεί."
-
-msgid "and fill out all required fields."
-msgstr "και συμπληρώστε όλα τα απαραίτητα πεδία."
diff --git a/po/el/firewall.po b/po/el/firewall.po
deleted file mode 100644
index e923b28..0000000
--- a/po/el/firewall.po
+++ /dev/null
@@ -1,635 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-03-31 15:40+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr "%s%s με %s"
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr "-- Παρακαλώ επιλέξτε --"
-
-msgid "-- custom --"
-msgstr "-- προσαρμοσμένο --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> πκτ. ανά <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr "Ενέργεια"
-
-msgid "Add"
-msgstr "Προσθήκη"
-
-msgid "Add and edit..."
-msgstr "Προσθήκη και επεξεργασία..."
-
-msgid "Advanced Settings"
-msgstr "Ρυθμίσεις για προχωρημένους"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr "Οποιοδήποτε"
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr "Προσαρμοσμένοι Κανόνες"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr "Διεύθυνση IP προορισμού"
-
-msgid "Destination address"
-msgstr "Διεύθυνση προορισμού"
-
-msgid "Destination port"
-msgstr "Θύρα προορισμού"
-
-#, fuzzy
-msgid "Destination zone"
-msgstr "Ζώνη προορισμού"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr "Αγνόηση μη-έγκυρων πακετών"
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-#, fuzzy
-msgid "Enable SYN-flood protection"
-msgstr "Προστασία SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr "Εξωτερική διεύθυνση IP"
-
-msgid "External port"
-msgstr "Εξωτερική θύρα"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr "Επιπλέον παράμετροι"
-
-msgid "Firewall"
-msgstr "Τείχος προστασίας"
-
-msgid "Firewall - Custom Rules"
-msgstr "Τείχος προστασίας - Προσαρμοσμένοι Κανόνες"
-
-msgid "Firewall - Port Forwards"
-msgstr "Τείχος προστασίας - Προώθηση Θυρών"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Τείχος προστασίας - Κανόνες Κίνησεις"
-
-msgid "Firewall - Zone Settings"
-msgstr "Τείχος προστασίας - Ρυθμίσεις Ζώνης"
-
-msgid "Force connection tracking"
-msgstr "Επιβολή παρακολούθησης σύνδεσης"
-
-msgid "Forward"
-msgstr "Προώθηση"
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr "Απο %s στο %s"
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Γενικές Ρυθμίσεις"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 και IPv6"
-
-msgid "IPv4 only"
-msgstr "Μόνο IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "Μόνο IPv6"
-
-msgid "Input"
-msgstr "Είσοδος"
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-#, fuzzy
-msgid "Internal IP address"
-msgstr "Εσωτερική διεύθυνση"
-
-#, fuzzy
-msgid "Internal port"
-msgstr "Εξωτερική θύρα"
-
-msgid "Internal zone"
-msgstr "Εσωτερική ζώνη"
-
-msgid "Limit log messages"
-msgstr "Περιορισμός καταγραφών συστήματος"
-
-#, fuzzy
-msgid "MSS clamping"
-msgstr "Περιορισμός MSS"
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr "Όνομα"
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr "Άλλο..."
-
-msgid "Output"
-msgstr "Έξοδος"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr "Προώθηση Θυρών"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr "Πρωτόκολλο"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-#, fuzzy
-msgid "Source IP address"
-msgstr "Διεύθυνση MAC πηγής"
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-#, fuzzy
-msgid "Source address"
-msgstr "Διεύθυνση MAC πηγής"
-
-msgid "Source port"
-msgstr "Θύρα πηγής"
-
-#, fuzzy
-msgid "Source zone"
-msgstr "Θύρα πηγής"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"Το τείχος προστασίας δημιουργεί ζώνες πάνω στις διεπαφές δικτύου για να "
-"ελέγχει την δικτυακή κίνηση."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr "Ζώνες"
-
-msgid "accept"
-msgstr "αποδοχή"
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr "αγνόηση"
-
-msgid "reject"
-msgstr "απόρριψη"
-
-#~ msgid "Destination"
-#~ msgstr "Προορισμός"
-
-#~ msgid "Family"
-#~ msgstr "Οικογένεια"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "Προώθηση του %s στο %s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "Προώθηση στο %s, %s στο %s"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Πηγή"
-
-#~ msgid "To %s"
-#~ msgstr "Προς %s"
-
-#~ msgid "Accept forward"
-#~ msgstr "Αποδοχή προώθησης"
-
-#~ msgid "Accept input"
-#~ msgstr "Αποδοχή εισόδου"
-
-#~ msgid "Disable"
-#~ msgstr "Απενεργοποίηση"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "Εύρος IP"
-
-#~ msgid "IPs"
-#~ msgstr "IPs"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MACs"
-#~ msgstr "MACs"
-
-#~ msgid "Refuse forward"
-#~ msgstr "Άρνηση προώθησης"
-
-#~ msgid "Refuse input"
-#~ msgstr "Άρνηση εισόδου"
-
-#~ msgid "day"
-#~ msgstr "ημέρα"
-
-#~ msgid "hour"
-#~ msgstr "ώρα"
-
-#~ msgid "minute"
-#~ msgstr "λεπτό"
-
-#~ msgid "port"
-#~ msgstr "θύρα"
-
-#~ msgid "ports"
-#~ msgstr "θύρες"
-
-#~ msgid "second"
-#~ msgstr "δευτερόλεπτο"
-
-#~ msgid "type"
-#~ msgstr "τύπος"
-
-#~ msgid "types"
-#~ msgstr "τύποι"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Εσωτερική θύρα (προαιρετικό)"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Προχωρημένοι Κανόνες"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Οι προχωρημένοι κανόνες σας επιτρέπουν να προσαρμόσετε το τείχος "
-#~ "προστασίας στις δικές σας ανάγκες. Οι κανόνες θα εφαρμόζονται μόνο στις "
-#~ "νέες συνδέσεις. Πακέτα που ανήκουν σε ήδη ανοιχτές συνδέσεις, θα περνάνε "
-#~ "αυτόματα το τείχος προστασίας."
-
-#~ msgid "Port forwarding"
-#~ msgstr "Προώθηση θυρών"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "Η προώθηση θυρών επιτρέπει σε υπηρεσίες δικτύου που λειτουργούν μέσα σε "
-#~ "ένα εσωτερικό δίκτυο, να γίνονται διαθέσιμες και σε ένα εξωτερικό."
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Ανακατεύθυνση Κίνησης"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "Η ανακατεύθυνση κίνησης σας επιτρέπει να αλλάξετε την διεύθυνση "
-#~ "προορισμού των προωθημένων πακέτων."
-
-#, fuzzy
-#~ msgid "Network"
-#~ msgstr "Δίκτυα"
-
-#~ msgid "Traffic Control"
-#~ msgstr "Έλεγχος Κίνησης"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Κίνηση Ζώνης-προς-Ζώνη"
-
-#, fuzzy
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Εδώ μπορείτε να ορίσετε τι δικτυακή κίνηση επιτρέπεται μεταξύ δικτυακών "
-#~ "ζωνών. Θα εφαρμόζεται μόνο σε νέες συνδέσεις. Πακέτα που ανήκουν σε ήδη "
-#~ "ανοιχτές συνδέσεις θα περνάνε αυτόματα το τείχος προστασίας. Αν "
-#~ "αντιμετωπίζεται σποραδικά προβλήματα με τη σύνδεσή σας, δοκιμάστε να "
-#~ "ενεργοποιήσετε τον Περιορισμό MSS, αλλιώς απενεργοποιήστε το για "
-#~ "μεγαλύτερη απόδοση."
-
-#~ msgid "Zone"
-#~ msgstr "Ζώνη"
-
-#, fuzzy
-#~ msgid "Destination IP"
-#~ msgstr "Προορισμός"
-
-#, fuzzy
-#~ msgid "IP address"
-#~ msgstr "Διεύθυνση IP"
-
-#, fuzzy
-#~ msgid "Source MAC-address"
-#~ msgstr "Διεύθυνση MAC πηγής"
-
-#~ msgid "Custom forwarding"
-#~ msgstr "Προσαρμοσμένη προώθηση"
-
-#~ msgid "Input Zone"
-#~ msgstr "Ζώνη Εισόδου"
-
-#~ msgid "Output Zone"
-#~ msgstr "Ζώνη Εξόδου"
-
-#~ msgid "External Zone"
-#~ msgstr "Εξωτερική Ζώνη"
-
-#~ msgid "Source MAC"
-#~ msgstr "MAC πηγής"
-
-#~ msgid "Defaults"
-#~ msgstr "Προκαθορισμένα"
-
-#~ msgid ""
-#~ "These are the default settings that are used if no other rules match."
-#~ msgstr ""
-#~ "Αυτές είναι οι προκαθορισμένες ρυθμίσεις που χρησιμοποιούνται αν δεν "
-#~ "υπάρχει κάποιος άλλος κανόνας που ταιριάζει."
-
-#~ msgid ""
-#~ "Zones part the network interfaces into certain isolated areas to separate "
-#~ "network traffic. One or more networks can belong to a zone. The MASQ-flag "
-#~ "enables NAT masquerading for all outgoing traffic on this zone."
-#~ msgstr ""
-#~ "Οι ζώνες χωρίζουν τις δικτυακές διεπαφές σε απομονωμένες περιοχές ώστε να "
-#~ "διαχωρίζεται η δικτυακή κίνηση. Σε μία ζώνη μπορούν να ανήκουν ένα ή "
-#~ "περισσότερα δίκτυα. Η σημαία MASQ ενεργοποιεί NAT masquerading για όλη "
-#~ "την εξερχόμενη κίνηση της ζώνης."
-
-#~ msgid "MASQ"
-#~ msgstr "MASQ"
-
-#~ msgid "contained networks"
-#~ msgstr "δίκτυα που περιέχονται"
diff --git a/po/el/freifunk-policyrouting.po b/po/el/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/el/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/el/freifunk.po b/po/el/freifunk.po
deleted file mode 100644
index 8bb4490..0000000
--- a/po/el/freifunk.po
+++ /dev/null
@@ -1,401 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2012-03-18 15:11+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr "Βασικές Ρυθμίσεις"
-
-msgid "Basic settings"
-msgstr "Βασικές ρυθμίσεις"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr "Βασικές ρυθμίσεις συστήματος"
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr "Κανάλι"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr "Κοινότητα"
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr "Επικοινωνία"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr "Συντεταγμένες"
-
-msgid "Country code"
-msgstr "Κωδικός xώρας"
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr "Ηλ. Ταχυδρομείο"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr "Σφάλμα"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr "Πύλη"
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Γεια σας και καλώς ήλθατε στο δίκτυο"
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr "Αν ενδιαφέρεστε για το έργο μας, επικοινωνήστε με την τοπική κοινότητα"
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"Η πρόσβαση στο διαδίκτυο εξαρτάται από τις τεχνικές και τις οργανωτικές "
-"συνθήκες και μπορεί να λειτουργεί ή όχι για σας."
-
-msgid "It is operated by"
-msgstr "Διαχειρίζεται από"
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr "Γεωγραφικό πλάτος"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Τοπική Ώρα"
-
-msgid "Location"
-msgstr "Τοποθεσία"
-
-msgid "Longitude"
-msgstr "Γεωγραφικό μήκος"
-
-msgid "Map"
-msgstr "Χάρτης"
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr "Μνήμη"
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr "Δίκτυο"
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr "Ψευδώνυμο"
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr "Σημείωση"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr "Τηλέφωνο"
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr "Επεξεργαστής"
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr "Ονοματεπώνυμο"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr "Σήμα"
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr "Στατιστικά"
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr "Σύστημα"
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr "Αυτές είναι οι ρυθμίσεις της τοπικής σας κοινότητας."
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-"Αυτές οι σελίδες θα σας βοηθήσουν να ρυθμίσετε το δρομολογητή σας για το "
-"Freifunk ή παρόμοια ασύρματα κοινοτικά δίκτυα."
-
-msgid "This is the access point"
-msgstr "Αυτό είναι το access point"
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Είμαστε μία πρωτοβουλία για την εδραίωση ενός ελεύθερου, ανεξάρτητου και "
-"ανοιχτού ασύρματου mesh δικτύου."
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-"Μπορείτε να βρείτε περισσότερες πληροφορίες για την παγκόσμια πρωτοβουλία "
-"Freifunk στο"
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr "π.χ."
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
-
-#~ msgid "Source"
-#~ msgstr "Πηγή"
diff --git a/po/el/hd_idle.po b/po/el/hd_idle.po
deleted file mode 100644
index 2df9127..0000000
--- a/po/el/hd_idle.po
+++ /dev/null
@@ -1,48 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-03-18 15:14+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Disk"
-msgstr "Δίσκος"
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid "Enable debug"
-msgstr "Ενεργοποίηση αποσφαλμάτωσης"
-
-msgid "Idle-time"
-msgstr ""
-
-msgid "Idle-time unit"
-msgstr ""
-
-msgid "Settings"
-msgstr "Ρυθμίσεις"
-
-# Hours
-msgid "h"
-msgstr "ω"
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "λεπτά"
diff --git a/po/el/meshwizard.po b/po/el/meshwizard.po
deleted file mode 100644
index b531eed..0000000
--- a/po/el/meshwizard.po
+++ /dev/null
@@ -1,124 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-18 15:14+0200\n"
-"PO-Revision-Date: 2012-03-31 15:40+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "Κανάλι"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr "Καθαρισμός ρυθμίσεων"
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr "Ενεργοποίηση DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Γενικές Ρυθμίσεις"
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Διεπαφές"
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/el/minidlna.po b/po/el/minidlna.po
deleted file mode 100644
index 48c6188..0000000
--- a/po/el/minidlna.po
+++ /dev/null
@@ -1,164 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/el/mmc_over_gpio.po b/po/el/mmc_over_gpio.po
deleted file mode 100644
index 8aadeff..0000000
--- a/po/el/mmc_over_gpio.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2010-07-01 20:18+0200\n"
-"Last-Translator: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "Ρυθμίσεις"
diff --git a/po/el/multiwan.po b/po/el/multiwan.po
deleted file mode 100644
index 48d3165..0000000
--- a/po/el/multiwan.po
+++ /dev/null
@@ -1,118 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 15:16+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr "Διεύθυνση Προορισμού"
-
-msgid "Disable"
-msgstr "Απενεργοποίηση"
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr "Πρωτόκολλο"
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/el/ntpc.po b/po/el/ntpc.po
deleted file mode 100644
index c8f22eb..0000000
--- a/po/el/ntpc.po
+++ /dev/null
@@ -1,56 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-03-31 15:40+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Clock Adjustment"
-msgstr "Ρύθμιση Ρολογιού"
-
-msgid "Count of time measurements"
-msgstr "Πλήθος μετρήσεων ώρας"
-
-msgid "Current system time"
-msgstr "Τρέχουσα ώρα συστήματος"
-
-msgid "General"
-msgstr "Γενικά"
-
-msgid "Hostname"
-msgstr "Όνομα συστήματος"
-
-#, fuzzy
-msgid "Offset frequency"
-msgstr "Συχνότητα μετάθεσης"
-
-msgid "Port"
-msgstr "Θύρα"
-
-msgid "Synchronizes the system time"
-msgstr "Συγχρονίζει την ώρα του συστήματος"
-
-msgid "Time Server"
-msgstr ""
-
-#, fuzzy
-msgid "Time Servers"
-msgstr "Εξυπηρετητές Ώρας"
-
-msgid "Time Synchronisation"
-msgstr "Συγχρονισμός Ώρας"
-
-#, fuzzy
-msgid "Update interval (in seconds)"
-msgstr "Περίοδος ενημέρωσης (σε δευτερόλεπτα)"
-
-msgid "empty = infinite"
-msgstr "άδειο = άπειρος"
diff --git a/po/el/olsr.po b/po/el/olsr.po
deleted file mode 100644
index b973ad6..0000000
--- a/po/el/olsr.po
+++ /dev/null
@@ -1,581 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2012-03-31 15:41+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr "Ενεργοί κόμβοι OLSR"
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr "Προχωρημένες Ρυθμίσεις"
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr "Συσκευή"
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr "ETX"
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr "Ενεργοποίηση αυτής της διεπαφής."
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr "Πύλη"
-
-msgid "General Settings"
-msgstr "Γενικές Ρυθμίσεις"
-
-msgid "General settings"
-msgstr "Γενικές ρυθμίσεις"
-
-msgid "HNA"
-msgstr "HNA"
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr "Διευθύνσεις IP"
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Διεπαφές"
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr "Συνδέσεις σύνολο"
-
-msgid "Local interface IP"
-msgstr "IP τοπικής διεπαφής"
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "Δίκτυο"
-
-msgid "Network address"
-msgstr "Διεύθυνση δικτύου"
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr "OLSR Δαίμονας"
-
-msgid "OLSR Daemon - Interface"
-msgstr "OLSR Δαίμονας - Διεπαφή"
-
-msgid "OLSR connections"
-msgstr "OLSR συνδέσεις"
-
-msgid "OLSR gateway"
-msgstr "OLSR πύλη"
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr "Πόρτα"
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr "Διαδρομές"
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr "SmartGW"
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr "Τοπολογία"
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr "Έκδοση"
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/el/openvpn.po b/po/el/openvpn.po
deleted file mode 100644
index c10521f..0000000
--- a/po/el/openvpn.po
+++ /dev/null
@@ -1,560 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2012-03-18 15:23+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr "Προσθήκη"
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr "Επιτρέπουμε στον απομακρυσμένο να αλλάξει την IP ή τη θύρα"
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Παρακάτω είναι μία λίστα των ρυθμισμένων περιστατικών OpenVPN και της "
-"τρέχουσας κατάστασής τους"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr "Σύνδεση μέσω διαμεσολαβητή Socks5"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr "Διάστημα επαναπροσπάθειας σύνδεσης"
-
-msgid "Cryptography"
-msgstr "Κρυπτογραφία"
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr "Μη συνδέσεις σε τοπική διεύθυνση και θύρα"
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr "Ενεργοποιημένο"
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr "Εκτέλεση της εντολής κελύφους στην αλλαγή IP του απομακρυσμένου"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-"Αν αποτύχει η μετατροπή του ονόματος του μηχανήματος σε IP, ξαναπροσπάθησε"
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr "Όνομα τοπικού μηχανήματος ή διεύθυνση IP"
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Διεργασίες OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Θύρα"
-
-msgid "Protocol"
-msgstr "Πρωτόκολλο"
-
-msgid "Proxy timeout in seconds"
-msgstr "Τέλος χρόνου μεσολαβητή σε δευτερόλεπτα"
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr "Τυχαία επιλογή απομακρυσμένου διακομιστή"
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr "Όνομα απομακρυσμένου μηχανήματος ή διεύθυνση IP"
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Επαναπροσπάθεια για πάντα αν υπάρχουν λάθη HTTP στο μεσολαβητή"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Επαναπροσπάθεια για πάντα σε περίπτωση λαθών στο διαμεσολαβητή Socks5"
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr "Υπηρεσία"
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr "Ορισμός εκτεταμένων ρυθμίσεων διαμεσολαβητή HTTP"
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr "Εκκίνηση/Τερματισμός"
-
-msgid "Started"
-msgstr "Ξεκίνησε"
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr "Μετάβαση στις προχωρημένες ρυθμίσεις »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "TCP/UDP νούμερο θύρας για το τοπικό και το απομακρυσμένο"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "TCP/UDP αριθμός θύρας για το τοπικό (εξ'ορισμού=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "TCP/UDP αριθμός θύρας για τον απομακρυσμένο (εξ'ορισμού=1194)"
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr "Είδος χρησιμοποιούμενης συσκευής"
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr "όχι"
-
-msgid "tun/tap device"
-msgstr "Συσκευή tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr "ναι (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Μετάβαση στις βασικές επιλογές"
-
-#~ msgid "openvpn_%s"
-#~ msgstr "openvpn_%s"
-
-#~ msgid "openvpn_%s_desc"
-#~ msgstr "openvpn_%s_desc"
diff --git a/po/el/p2pblock.po b/po/el/p2pblock.po
deleted file mode 100644
index 9db357a..0000000
--- a/po/el/p2pblock.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-18 15:23+0200\n"
-"PO-Revision-Date: 2012-03-18 15:23+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr "δευτερόλεπτα"
diff --git a/po/el/p910nd.po b/po/el/p910nd.po
deleted file mode 100644
index fe0aa31..0000000
--- a/po/el/p910nd.po
+++ /dev/null
@@ -1,49 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2012-03-18 15:25+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Bidirectional mode"
-msgstr "Αμφίδρομη μέθοδος"
-
-msgid "Device"
-msgstr "Συσκευή"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Πρώτα πρέπει να εγκατασταθούν τα πακέτα για να υπάρξει υποστήριξη για USB "
-"(kmod-usb-printer) ή παράλληλη θύρα (kmod-lp)."
-
-msgid "Port"
-msgstr "Θύρα"
-
-msgid "Settings"
-msgstr "Ρυθμίσεις"
-
-msgid "TCP listener port."
-msgstr "Θύρα ακρόασης TCP"
-
-msgid "enable"
-msgstr "ενεργοποίηση"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Εξυπηρετητής εκτυπώσεων"
-
-#~ msgid "port_help"
-#~ msgstr "port_help"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr ""
-#~ "p910nd ανταποκρίνεται στην πόρτα 910+N. π.χ. 9100 για τον πρώτο εκτυπωτή"
diff --git a/po/el/pbx-voicemail.po b/po/el/pbx-voicemail.po
deleted file mode 100644
index fc0a2e3..0000000
--- a/po/el/pbx-voicemail.po
+++ /dev/null
@@ -1,94 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 15:26+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr "Όχι"
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
-
-#~ msgid "Enabled"
-#~ msgstr "Ενεργοποιημένο"
diff --git a/po/el/pbx.po b/po/el/pbx.po
deleted file mode 100644
index 0971805..0000000
--- a/po/el/pbx.po
+++ /dev/null
@@ -1,458 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-31 15:41+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr "Μην Ενοχλείτε"
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr "Ενεργοποιημένο"
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr "Πλήρες Όνομα"
-
-msgid "General Settings"
-msgstr "Γενικές Ρυθμίσεις"
-
-msgid "Google Accounts"
-msgstr "Λογαριασμοί Google"
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr "Λογαριασμοί Google Voice/Talk"
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr "Εισερχόμενες Κλήσεις"
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr "Όχι"
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr "Εξερχόμενες Κλήσεις"
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "Password"
-msgstr "Κωδικός πρόσβασης"
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr "Λογαριασμοί SIP"
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-#~ msgid "Account Status"
-#~ msgstr "Κατάσταση Λογαριασμού"
-
-#~ msgid "Account Status Message"
-#~ msgstr "Μήνυμα Κατάστασης Λογαριασμού"
diff --git a/po/el/polipo.po b/po/el/polipo.po
deleted file mode 100644
index e7a62dd..0000000
--- a/po/el/polipo.po
+++ /dev/null
@@ -1,207 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2012-03-18 15:29+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Γενικές Ρυθμίσεις"
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/el/qos.po b/po/el/qos.po
deleted file mode 100644
index 35c4d22..0000000
--- a/po/el/qos.po
+++ /dev/null
@@ -1,130 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-03-18 15:29+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#, fuzzy
-msgid "Calculate overhead"
-msgstr "Υπολογισμός Overhead"
-
-#, fuzzy
-msgid "Classification Rules"
-msgstr "Κατηγοριοποίηση"
-
-#, fuzzy
-msgid "Classification group"
-msgstr "Κατηγοριοποίηση"
-
-msgid "Destination host"
-msgstr ""
-
-#, fuzzy
-msgid "Downlink"
-msgstr "Ταχύτητα κατεβάσματος"
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-#, fuzzy
-msgid "Half-duplex"
-msgstr "Μη-ταυτόχρονη αμφίδρομη επικοινωνία"
-
-msgid "Interfaces"
-msgstr "Διεπαφές"
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-#, fuzzy
-msgid "Ports"
-msgstr "Προτεραιότητα"
-
-msgid "Protocol"
-msgstr "Πρωτόκολλο"
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr "Ποιότητα Υπηρεσίας"
-
-msgid "Service"
-msgstr "Υπηρεσία"
-
-#, fuzzy
-msgid "Source host"
-msgstr "Διεύθυνση πηγής"
-
-#, fuzzy
-msgid "Target"
-msgstr "Διεύθυνση στόχου"
-
-#, fuzzy
-msgid "Uplink"
-msgstr "Ταχύτητα ανεβάσματος"
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-#, fuzzy
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Με το QoS μπορείτε να ορίσετε προτεραιότητες στην κίνηση του δικτύου με βάση "
-"διευθύνσεις, θύρες ή υπηρεσίες."
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr "προεπιλογή"
-
-msgid "express"
-msgstr "εξπρές"
-
-msgid "low"
-msgstr "χαμηλή"
-
-msgid "normal"
-msgstr "κανονική"
-
-msgid "priority"
-msgstr "προτεραιότητα"
-
-msgid "qos_connbytes"
-msgstr ""
-
-#~ msgid "Prioritization"
-#~ msgstr "Προτεραιότητες"
-
-#~ msgid "source network / source host"
-#~ msgstr "πηγαίο δίκτυο / πηγαίος υπολογιστής"
-
-#~ msgid "target network / target host"
-#~ msgstr "δίκτυο στόχος / υπολογιστής στόχος"
-
-#~ msgid "portrange"
-#~ msgstr "εύρος θυρών"
-
-#~ msgid "Bytes sent"
-#~ msgstr "Απεσταλμένα byte"
diff --git a/po/el/radvd.po b/po/el/radvd.po
deleted file mode 100644
index 00763c9..0000000
--- a/po/el/radvd.po
+++ /dev/null
@@ -1,370 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 15:31+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: German\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "6to4 interface"
-msgstr "Διεπαφή 6to4"
-
-msgid "Address"
-msgstr "Διεύθυνση"
-
-msgid "Addresses"
-msgstr "Διευθύνσεις"
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr "Πελάτες"
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Διεπαφές"
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr "Radvd - DNSSL"
-
-msgid "Radvd - Interface %q"
-msgstr "Radvd - Διεπαφή %q"
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr "Radvd - RDNSS"
-
-msgid "Radvd - Route"
-msgstr "Radvd - Διαδρομή"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr "Διαδρομές"
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr "όχι"
-
-msgid "yes"
-msgstr "ναι"
diff --git a/po/el/rrdtool.po b/po/el/rrdtool.po
deleted file mode 100644
index 1d81166..0000000
--- a/po/el/rrdtool.po
+++ /dev/null
@@ -1,358 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/el/samba.po b/po/el/samba.po
deleted file mode 100644
index 7cc722d..0000000
--- a/po/el/samba.po
+++ /dev/null
@@ -1,78 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2012-03-18 15:31+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr ""
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-
-msgid "Allowed users"
-msgstr ""
-
-msgid "Create mask"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Directory mask"
-msgstr ""
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Mask for new directories"
-msgstr ""
-
-msgid "Mask for new files"
-msgstr ""
-
-msgid "Name"
-msgstr "Όνομα"
-
-msgid "Network Shares"
-msgstr ""
-
-msgid "Path"
-msgstr ""
-
-msgid "Read-only"
-msgstr ""
-
-msgid "Share home-directories"
-msgstr ""
-
-msgid "Shared Directories"
-msgstr ""
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr ""
diff --git a/po/el/splash.po b/po/el/splash.po
deleted file mode 100644
index 0d37a9c..0000000
--- a/po/el/splash.po
+++ /dev/null
@@ -1,312 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-18 15:31+0200\n"
-"PO-Revision-Date: 2012-03-18 15:31+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr "Διεύθυνση IP"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Διεπαφές"
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "Διεύθυνση MAC"
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "Δίκτυο"
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Αποθήκευση"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/el/statistics.po b/po/el/statistics.po
deleted file mode 100644
index c55afdf..0000000
--- a/po/el/statistics.po
+++ /dev/null
@@ -1,606 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-03-18 15:32+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-#, fuzzy
-msgid "Base Directory"
-msgstr "Κατάλογος βάσης"
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr "Έξοδος CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Ρυθμίσεις Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Το Collectd είναι ένας μικρός δαίμονας για τη συλλογή δεδομένων από διάφορες "
-"πηγές μέσω διάφορων προσθέτων. Σε αυτή τη σελίδα μπορείτε να αλλάξετε τις "
-"γενικές ρυθμίσεις του δαίμονα collectd."
-
-msgid "Conntrack"
-msgstr "Conntrack"
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr "Περίοδος συλλογής δεδομένων"
-
-msgid "Datasets definition file"
-msgstr "Αρχείο ορισμού συνόλων δεδομένων"
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr "Κατάλογος για πρόσθετα collectd"
-
-#, fuzzy
-msgid "Directory for sub-configurations"
-msgstr "Κατάλογος υπο-ρυθμίσεων"
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr "Χρήση Χώρου στον δίσκο"
-
-msgid "Disk Usage"
-msgstr "Χρήση Δίσκου"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Εμφάνιση χρονικού εύρους »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr "Ηλ. Ταχυδρομείο"
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Τείχος προστασίας"
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr "Γραφήματα"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Όνομα υπολογιστή"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Διεπαφές"
-
-msgid "Interrupts"
-msgstr "Διακοπές"
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr "Μνήμη"
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr "Όνομα κανόνα"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr "Δίκτυο"
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr "Πρόσθετα δικτύου"
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr "Αριθμός νημάτων για τη συλλογή δεδομένων"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr "Πρόσθετα εξόδου"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Διεργασίες"
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Επεξεργαστής"
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Δευτερόλεπτα"
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr "Στατιστικά"
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr "Φόρτος Συστήματος"
-
-msgid "System plugins"
-msgstr "Πρόσθετα συστήματος"
-
-msgid "TCP Connections"
-msgstr "Συνδέσεις TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr "Πίνακας"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"Το πακέτο στατιστικών βασίζεται στο <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> και χρησιμοποιεί το <a href=\"http://oss.oetiker.ch/rrdtool/"
-"\">RRD Tool</a> για να σχεδιάσει διαγράμματα από τα συλλεγόμενα δεδομένα."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr "Αρχείο PID σε χρήση"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr "Ασύρματο"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr "π.χ. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "π.χ. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/el/tinyproxy.po b/po/el/tinyproxy.po
deleted file mode 100644
index 718424e..0000000
--- a/po/el/tinyproxy.po
+++ /dev/null
@@ -1,283 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2012-03-18 16:25+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-"Το <em>μέσω proxy</em> δρομολογεί αιτήσεις προς τον συγκεκριμένο προορισμό "
-"μέσω του καθοριζόμενου διαμεσολαβητή ανωτέρου επιπέδου, Το <em>απόρριψη "
-"πρόσβασης</em> απενεργοποιεί τη χρήση διαμεσολαβητή ανωτέρου επιπέδου για το "
-"συγκεκριμένο προορισμό"
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"Προσθέτει μια κεφαλίδα HTTP \"X-Tinyproxy\" με τη διεύθυνση IP του πελάτη "
-"στις προωθούμενες αιτήσεις"
-
-msgid "Allowed clients"
-msgstr "Επιτρεπόμενοι πελάτες"
-
-msgid "Allowed connect ports"
-msgstr "Επιτρεπόμενες θύρες σύνδεσης"
-
-#, fuzzy
-msgid "Bind address"
-msgstr "Διεύθυνση στην οποία ακούει η υπηρεσία"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"Προεπιλεγμένα, χρησιμοποιούνται απλές κανονικές εκφράσεις POSIX για το "
-"φιλτράρισμα. Ενεργοποιήστε αυτή την επιλογή για να χρησιμοποιούνται "
-"εκτεταμένες κανονικές εκφράσεις"
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-"Προεπιλεγμένα, το φιλτράρισμα με συμβολοσειρές γίνεται χωρίς διάκριση πεζών "
-"κεφαλαίων. Ενεργοποιήστε αυτή την επιλογή για να γίνεται διάκριση πεζών "
-"κεφαλαίων"
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-"Προεπιλεγμένα, το φιλτράρισμα γίνεται βάσει του ονόματος τομέα. "
-"Ενεργοποιήστε αυτή την επιλογή για να γίνεται βάσει URL"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"Προεπιλεγμένα, οι κανόνες φιλτραρίσματος λειτουργούν ως μαύρη λίστα. "
-"Ενεργοποιήστε αυτή την επιλογή ώστε να επιτρέπονται μόνο τα ονόματα τομέα ή "
-"URLs που ταιριάζουν"
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-"Μπορεί να είναι μια IP διεύθυνση ή εύρος, ένα όνομα τομέα ή \".\" για "
-"οποιοδήποτε σύστημα χωρίς όνομα τομέα"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr "Χρονικό όριο σύνδεσης"
-
-msgid "Default deny"
-msgstr "Άρνηση προεπιλεγμένα"
-
-msgid "Enable Tinyproxy server"
-msgstr "Ενεργοποίηση διαμεσολαβητή Tinyproxy"
-
-msgid "Error page"
-msgstr "Σελίδα σφάλματος"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr "Φιλτράρισμα με Κανονικές Εκφράσεις"
-
-msgid "Filter by URLs"
-msgstr "Φιλτράρισμα με URL"
-
-msgid "Filter case-sensitive"
-msgstr "Φιλτράρισμα με διάκριση πεζών/κεφαλαίων"
-
-msgid "Filter file"
-msgstr "Αρχείο φίλτρων"
-
-msgid "Filtering and ACLs"
-msgstr "Φιλτράρισμα και λίστες ελέγχου πρόσβασης"
-
-msgid "General settings"
-msgstr "Γενικές ρυθμίσεις"
-
-msgid "Group"
-msgstr "Ομάδα"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-"Αρχείο προτύπου HTML που στέλνεται σε αιτήσεις για στατιστικά του συστήματος"
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "Αρχείο προτύπου HTML που στέλνεται όταν προκύπτουν σφάλματα HTML"
-
-msgid "Header whitelist"
-msgstr "Λευκή λίστα κεφαλίδων"
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-"Λίστα διευθύνσεων IP ή εύρη αυτών στις οποίες επιτρέπεται η χρήση του "
-"διαμεσολαβητή"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/el/transmission.po b/po/el/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/el/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/el/upnp.po b/po/el/upnp.po
deleted file mode 100644
index fb6ac69..0000000
--- a/po/el/upnp.po
+++ /dev/null
@@ -1,148 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/el/ushare.po b/po/el/ushare.po
deleted file mode 100644
index 331c8a0..0000000
--- a/po/el/ushare.po
+++ /dev/null
@@ -1,48 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-28 02:08+0200\n"
-"PO-Revision-Date: 2010-06-30 17:26+0200\n"
-"Last-Translator: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Content directories"
-msgstr "Φάκελοι περιεχομένου"
-
-msgid "Disable telnet console"
-msgstr "Απενεργοποίηση τερματικού telnet"
-
-msgid "Disable webinterface"
-msgstr "Απενεργοποίηση διεπαφής web"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "Επιλογές"
-
-msgid "Servername"
-msgstr "Όνομα εξυπηρετητή"
-
-msgid "Settings"
-msgstr "Ρυθμίσεις"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/el/uvc_streamer.po b/po/el/uvc_streamer.po
deleted file mode 100644
index f360173..0000000
--- a/po/el/uvc_streamer.po
+++ /dev/null
@@ -1,41 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-12 13:02+0200\n"
-"Last-Translator: elkos <elkosmas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Ανάλυση"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Ρυθμίσεις"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/el/vnstat.po b/po/el/vnstat.po
deleted file mode 100644
index 9d23778..0000000
--- a/po/el/vnstat.po
+++ /dev/null
@@ -1,59 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-16 20:54+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/el/voice_core.po b/po/el/voice_core.po
deleted file mode 100644
index 01abb41..0000000
--- a/po/el/voice_core.po
+++ /dev/null
@@ -1,18 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-02-16 19:15+0200\n"
-"Last-Translator: Jinxcat <bikkit@gmail.com>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Phones"
-msgstr "Τηλέφωνα"
-
-msgid "Voice"
-msgstr ""
diff --git a/po/el/voice_diag.po b/po/el/voice_diag.po
deleted file mode 100644
index 4ff4f86..0000000
--- a/po/el/voice_diag.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 17:15+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: none\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Diagnostics"
-msgstr "Διαγνωστικά"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Τα διαγνωστικά που είναι διαθέσιμα για την συσκευή σας, εξαρτώνται από τα "
-"αρθρώματα που έχετε εγκατεστημένα."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Κάτω από αυτό το μενού βρίσκονται επιλογές που σας επιτρέπουν να "
-"παραμετροποιήσετε και να πραγματοποιήσετε δοκιμές στις φωνητικές λειτουργίες "
-"του συστήματός σας. Είναι γνωστές ως διαγνωστικά."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/el/watchcat.po b/po/el/watchcat.po
deleted file mode 100644
index ceafe5d..0000000
--- a/po/el/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/el/wol.po b/po/el/wol.po
deleted file mode 100644
index 811596c..0000000
--- a/po/el/wol.po
+++ /dev/null
@@ -1,49 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2010-04-19 00:29+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/el/wshaper.po b/po/el/wshaper.po
deleted file mode 100644
index 5c73ae1..0000000
--- a/po/el/wshaper.po
+++ /dev/null
@@ -1,55 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-18 17:10+0200\n"
-"PO-Revision-Date: 2012-03-18 17:10+0200\n"
-"Last-Translator: Vasilis <acinonyx@openwrt.gr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr "Διεπαφή"
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/en/ahcp.po b/po/en/ahcp.po
deleted file mode 100644
index d5d5895..0000000
--- a/po/en/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-15 11:31+0200\n"
-"Last-Translator: madanadam <madanadam@gmail.com>\n"
-"Language-Team: none\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "AHCP Server"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-
-msgid "Active AHCP Leases"
-msgstr "Active AHCP Leases"
-
-msgid "Address"
-msgstr "Address"
-
-msgid "Advanced Settings"
-msgstr "Advanced Settings"
-
-msgid "Age"
-msgstr "Age"
-
-msgid "Announced DNS servers"
-msgstr "Announced DNS servers"
-
-msgid "Announced NTP servers"
-msgstr "Announced NTP servers"
-
-msgid "Announced prefixes"
-msgstr "Announced prefixes"
-
-msgid "Collecting data..."
-msgstr "Collecting data..."
-
-msgid "Forwarder"
-msgstr "Forwarder"
-
-msgid "General Setup"
-msgstr "General Setup"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 and IPv6"
-
-msgid "IPv4 only"
-msgstr "IPv4 only"
-
-msgid "IPv6 only"
-msgstr "IPv6 only"
-
-msgid "Lease directory"
-msgstr "Lease directory"
-
-msgid "Lease validity time"
-msgstr "Lease validity time"
-
-msgid "Log file"
-msgstr "Log file"
-
-msgid "Multicast address"
-msgstr "Multicast address"
-
-msgid "Operation mode"
-msgstr "Operation mode"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Protocol family"
-
-msgid "Served interfaces"
-msgstr "Served interfaces"
-
-msgid "Server"
-msgstr "Server"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Specifies the announced IPv4 and IPv6 NTP servers"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Specifies the announced IPv4 and IPv6 name servers"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-"Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-
-msgid "The AHCP Service is not running."
-msgstr "The AHCP Service is not running."
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "The AHCP Service is running with ID %s."
-
-msgid "There are no active leases."
-msgstr "There are no active leases."
-
-msgid "Unique ID file"
-msgstr "Unique ID file"
diff --git a/po/en/asterisk.po b/po/en/asterisk.po
deleted file mode 100644
index e462f56..0000000
--- a/po/en/asterisk.po
+++ /dev/null
@@ -1,680 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: 2011-06-03 10:45+0200\n"
-"Last-Translator: Ladislav <suspend@tiscali.cz>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Asterisk General Options"
-
-#~ msgid "AGI directory"
-#~ msgstr "AGI directory"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Cache recorded sound files during recording"
-
-#~ msgid "Debug Level"
-#~ msgstr "Debug Level"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Disable some warnings"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Dump core on crash"
-
-#~ msgid "High Priority"
-#~ msgstr "High Priority"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Initialise Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Use Internal Timing"
-
-#~ msgid "Log directory"
-#~ msgstr "Log directory"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Maximum number of calls allowed"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Maximum load to stop accepting new calls"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Disable console colors"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Sound files Cache directory"
-
-#~ msgid "The Group to run as"
-#~ msgstr "The Group to run as"
-
-#~ msgid "The User to run as"
-#~ msgstr "The User to run as"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Voicemail Spool directory"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Prefix UniquID with system name"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "Build transcode paths via SLINEAR, not directly"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Transmit SLINEAR silence while recording a channel"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Verbose Level"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Section dialplan"
-
-#~ msgid "include"
-#~ msgstr "include"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Dialplan Extension"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Dialplan General Options"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Allow transfer"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Clear global vars"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "Dialplan Goto"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Dialplan Conference"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Dialplan Time"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Dialplan Voicemail"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Dial Zones for Dialplan"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "Prefix to add matching dialplans"
-
-#~ msgid "Match International prefix"
-#~ msgstr "Match International prefix"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Prefix (0) to add/remove to/from international numbers"
-
-#~ msgid "localzone"
-#~ msgstr "localzone"
-
-#~ msgid "Match plan"
-#~ msgstr "Match plan"
-
-#~ msgid "Connection to use"
-#~ msgstr "Connection to use"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Feature Key maps"
-
-#~ msgid "Attended transfer key"
-#~ msgstr "Attended transfer key"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "Blind transfer key"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Key to Disconnect call"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Key to Park call"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Parking Feature"
-
-#~ msgid "ADSI Park"
-#~ msgstr "ADSI Park"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "Attended transfer timeout (sec)"
-
-#~ msgid "One touch record key"
-#~ msgstr "One touch record key"
-
-#~ msgid "Name of call context for parking"
-#~ msgstr "Name of call context for parking"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Sound file to play to parked caller"
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr "Max time (ms) between digits for feature activation"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Method to Find Parking slot"
-
-#~ msgid "parkedmusicclass"
-#~ msgstr "parkedmusicclass"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Play courtesy tone to"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Enable Parking"
-
-#~ msgid "Extension to dial to park"
-#~ msgstr "Extension to dial to park"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Parking time (secs)"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "Range of extensions for call parking"
-
-#~ msgid "Pickup extension"
-#~ msgstr "Pickup extension"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Seconds to wait bewteen digits when transferring"
-
-#~ msgid "sound when attended transfer is complete"
-#~ msgstr "sound when attended transfer is complete"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "Sound when attended transfer fails"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Reload Hardware Config"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Reboot Method"
-
-#~ msgid "Parameter"
-#~ msgstr "Parameter"
-
-#~ msgid "Option type"
-#~ msgstr "Option type"
-
-#~ msgid "User name"
-#~ msgstr "User name"
-
-#~ msgid "IAX General Options"
-#~ msgstr "IAX General Options"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Allow Codecs"
-
-#~ msgid "Static"
-#~ msgstr "Static"
-
-#~ msgid "Write Protect"
-#~ msgstr "Write Protect"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Meetme Conference"
-
-#~ msgid "Admin PIN"
-#~ msgstr "Admin PIN"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "Meeting PIN"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Meetme Conference General Options"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Number of 20ms audio buffers to be used"
-
-#~ msgid "Modules"
-#~ msgstr "Modules"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Alarm Receiver Application"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Authentication Application"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "Make sure asterisk doesnt save CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Check if channel is available"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Listen in on any channel"
-
-#~ msgid "Control Playback Application"
-#~ msgstr "Control Playback Application"
-
-#~ msgid "Cuts up variables"
-#~ msgstr "Cuts up variables"
-
-#~ msgid "Database access functions"
-#~ msgstr "Database access functions"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Dialing Application"
-
-#~ msgid "Virtual Dictation Machine Application"
-#~ msgstr "Virtual Dictation Machine Application"
-
-#~ msgid "Directed Call Pickup Support"
-#~ msgstr "Directed Call Pickup Support"
-
-#~ msgid "Extension Directory"
-#~ msgstr "Extension Directory"
-
-#~ msgid "DISA (Direct Inward System Access) Application"
-#~ msgstr "DISA (Direct Inward System Access) Application"
-
-#~ msgid "Dump channel variables Application"
-#~ msgstr "Dump channel variables Application"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Simple Echo Application"
-
-#~ msgid "ENUM Lookup"
-#~ msgstr "ENUM Lookup"
-
-#~ msgid "Reevaluates strings"
-#~ msgstr "Reevaluates strings"
-
-#~ msgid "Executes applications"
-#~ msgstr "Executes applications"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "External IVR application interface"
-
-#~ msgid "Fork The CDR into 2 seperate entities"
-#~ msgstr "Fork The CDR into 2 seperate entities"
-
-#~ msgid "Get ADSI CPE ID"
-#~ msgstr "Get ADSI CPE ID"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Group Management Routines"
-
-#~ msgid "Encode and Stream via icecast and ices"
-#~ msgstr "Encode and Stream via icecast and ices"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Image Transmission Application"
-
-#~ msgid "Look up Caller*ID name/number from black"
-#~ msgstr "Look up Caller*ID name/number from black"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr "Look up CallerID Name from local databas"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Extension Macros"
-
-#~ msgid "A simple math Application"
-#~ msgstr "A simple math Application"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "MD5 checksum Application"
-
-#~ msgid "Digital Milliwatt (mu-law) Test Application"
-#~ msgstr "Digital Milliwatt (mu-law) Test Application"
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Record a call and mix the audio during the recording"
-
-#~ msgid "Call Parking and Announce Application"
-#~ msgstr "Call Parking and Announce Application"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Trivial Playback Application"
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Require phone number to be entered"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "True Call Queueing"
-
-#~ msgid "Random goto"
-#~ msgstr "Random goto"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Read Variable Application"
-
-#~ msgid "Read in a file"
-#~ msgstr "Read in a file"
-
-#~ msgid "Realtime Data Lookup/Rewrite"
-#~ msgstr "Realtime Data Lookup/Rewrite"
-
-#~ msgid "Trivial Record Application"
-#~ msgstr "Trivial Record Application"
-
-#~ msgid "Say time"
-#~ msgstr "Say time"
-
-#~ msgid "Send DTMF digits Application"
-#~ msgstr "Send DTMF digits Application"
-
-#~ msgid "Send Text Applications"
-#~ msgstr "Send Text Applications"
-
-#~ msgid "Set CallerID Application"
-#~ msgstr "Set CallerID Application"
-
-#~ msgid "CDR user field apps"
-#~ msgstr "CDR user field apps"
-
-#~ msgid "load => .so ; Set CallerID Name"
-#~ msgstr "load =&gt; .so ; Set CallerID Name"
-
-#~ msgid "load => .so ; Set CallerID Number"
-#~ msgstr "load =&gt; .so ; Set CallerID Number"
-
-#~ msgid "Set RDNIS Number"
-#~ msgstr "Set RDNIS Number"
-
-#~ msgid "Set ISDN Transfer Capability"
-#~ msgstr "Set ISDN Transfer Capability"
-
-#~ msgid "SMS/PSTN handler"
-#~ msgstr "SMS/PSTN handler"
-
-#~ msgid "Hangs up the requested channel"
-#~ msgstr "Hangs up the requested channel"
-
-#~ msgid "Stack Routines"
-#~ msgstr "Stack Routines"
-
-#~ msgid "Generic System() application"
-#~ msgstr "Generic System() application"
-
-#~ msgid "Playback with Talk Detection"
-#~ msgstr "Playback with Talk Detection"
-
-#~ msgid "Interface Test Application"
-#~ msgstr "Interface Test Application"
-
-#~ msgid "Transfer"
-#~ msgstr "Transfer"
-
-#~ msgid "TXTCIDName"
-#~ msgstr "TXTCIDName"
-
-#~ msgid "Send URL Applications"
-#~ msgstr "Send URL Applications"
-
-#~ msgid "Custom User Event Application"
-#~ msgstr "Custom User Event Application"
-
-#~ msgid "Send verbose output"
-#~ msgstr "Send verbose output"
-
-#~ msgid "Voicemail"
-#~ msgstr "Voicemail"
-
-#~ msgid "Waits until first ring after time"
-#~ msgstr "Waits until first ring after time"
-
-#~ msgid "Wait For Silence Application"
-#~ msgstr "Wait For Silence Application"
-
-#~ msgid "While Loops and Conditional Execution"
-#~ msgstr "While Loops and Conditional Execution"
-
-#~ msgid "Comma Separated Values CDR Backend"
-#~ msgstr "Comma Separated Values CDR Backend"
-
-#~ msgid "Customizable Comma Separated Values CDR Backend"
-#~ msgstr "Customizable Comma Separated Values CDR Backend"
-
-#~ msgid "Asterisk Call Manager CDR Backend"
-#~ msgstr "Asterisk Call Manager CDR Backend"
-
-#~ msgid "MySQL CDR Backend"
-#~ msgstr "MySQL CDR Backend"
-
-#~ msgid "PostgreSQL CDR Backend"
-#~ msgstr "PostgreSQL CDR Backend"
-
-#~ msgid "SQLite CDR Backend"
-#~ msgstr "SQLite CDR Backend"
-
-#~ msgid "Agent Proxy Channel"
-#~ msgstr "Agent Proxy Channel"
-
-#~ msgid "Option chan_iax2"
-#~ msgstr "Option chan_iax2"
-
-#~ msgid "Local Proxy Channel"
-#~ msgstr "Local Proxy Channel"
-
-#~ msgid "Session Initiation Protocol (SIP)"
-#~ msgstr "Session Initiation Protocol (SIP)"
-
-#~ msgid "Adaptive Differential PCM Coder/Decoder"
-#~ msgstr "Adaptive Differential PCM Coder/Decoder"
-
-#~ msgid "A-law Coder/Decoder"
-#~ msgstr "A-law Coder/Decoder"
-
-#~ msgid "A-law and Mulaw direct Coder/Decoder"
-#~ msgstr "A-law and Mulaw direct Coder/Decoder"
-
-#~ msgid "ITU G.726-32kbps G726 Transcoder"
-#~ msgstr "ITU G.726-32kbps G726 Transcoder"
-
-#~ msgid "GSM/PCM16 (signed linear) Codec Translation"
-#~ msgstr "GSM/PCM16 (signed linear) Codec Translation"
-
-#~ msgid "Speex/PCM16 (signed linear) Codec Translator"
-#~ msgstr "Speex/PCM16 (signed linear) Codec Translator"
-
-#~ msgid "Mu-law Coder/Decoder"
-#~ msgstr "Mu-law Coder/Decoder"
-
-#~ msgid "Sun Microsystems AU format (signed linear)"
-#~ msgstr "Sun Microsystems AU format (signed linear)"
-
-#~ msgid "G.723.1 Simple Timestamp File Format"
-#~ msgstr "G.723.1 Simple Timestamp File Format"
-
-#~ msgid "Raw G.726 (16/24/32/40kbps) data"
-#~ msgstr "Raw G.726 (16/24/32/40kbps) data"
-
-#~ msgid "Raw G729 data"
-#~ msgstr "Raw G729 data"
-
-#~ msgid "Raw GSM data"
-#~ msgstr "Raw GSM data"
-
-#~ msgid "Raw h263 data"
-#~ msgstr "Raw h263 data"
-
-#~ msgid "JPEG (Joint Picture Experts Group) Image"
-#~ msgstr "JPEG (Joint Picture Experts Group) Image"
-
-#~ msgid "Raw uLaw 8khz Audio support (PCM)"
-#~ msgstr "Raw uLaw 8khz Audio support (PCM)"
-
-#~ msgid "load => .so ; Raw aLaw 8khz PCM Audio support"
-#~ msgstr "load =&gt; .so ; Raw aLaw 8khz PCM Audio support"
-
-#~ msgid "Raw Signed Linear Audio support (SLN)"
-#~ msgstr "Raw Signed Linear Audio support (SLN)"
-
-#~ msgid "Dialogic VOX (ADPCM) File Format"
-#~ msgstr "Dialogic VOX (ADPCM) File Format"
-
-#~ msgid "Microsoft WAV format (8000hz Signed Line"
-#~ msgstr "Microsoft WAV format (8000hz Signed Line"
-
-#~ msgid "Microsoft WAV format (Proprietary GSM)"
-#~ msgstr "Microsoft WAV format (Proprietary GSM)"
-
-#~ msgid "Caller ID related dialplan functions"
-#~ msgstr "Caller ID related dialplan functions"
-
-#~ msgid "ENUM Functions"
-#~ msgstr "ENUM Functions"
-
-#~ msgid "URI encoding / decoding functions"
-#~ msgstr "URI encoding / decoding functions"
-
-#~ msgid "Asterisk Extension Language Compiler"
-#~ msgstr "Asterisk Extension Language Compiler"
-
-#~ msgid "Text Extension Configuration"
-#~ msgstr "Text Extension Configuration"
-
-#~ msgid "load => .so ; Builtin dialplan functions"
-#~ msgstr "load =&gt; .so ; Builtin dialplan functions"
-
-#~ msgid "Loopback Switch"
-#~ msgstr "Loopback Switch"
-
-#~ msgid "Realtime Switch"
-#~ msgstr "Realtime Switch"
-
-#~ msgid "Outgoing Spool Support"
-#~ msgstr "Outgoing Spool Support"
-
-#~ msgid "Wil Cal U (Auto Dialer)"
-#~ msgstr "Wil Cal U (Auto Dialer)"
-
-#~ msgid "MySQL Config Resource"
-#~ msgstr "MySQL Config Resource"
-
-#~ msgid "ODBC Config Resource"
-#~ msgstr "ODBC Config Resource"
-
-#~ msgid "PGSQL Module"
-#~ msgstr "PGSQL Module"
-
-#~ msgid "Cryptographic Digital Signatures"
-#~ msgstr "Cryptographic Digital Signatures"
-
-#~ msgid "Call Parking Resource"
-#~ msgstr "Call Parking Resource"
-
-#~ msgid "Indications Configuration"
-#~ msgstr "Indications Configuration"
-
-#~ msgid "Call Monitoring Resource"
-#~ msgstr "Call Monitoring Resource"
-
-#~ msgid "Music On Hold Resource"
-#~ msgstr "Music On Hold Resource"
-
-#~ msgid "ODBC Resource"
-#~ msgstr "ODBC Resource"
-
-#~ msgid "SMDI Module"
-#~ msgstr "SMDI Module"
-
-#~ msgid "SNMP Module"
-#~ msgstr "SNMP Module"
-
-#~ msgid "Music On Hold"
-#~ msgstr "Music On Hold"
-
-#~ msgid "Application"
-#~ msgstr "Application"
-
-#~ msgid "Directory of Music"
-#~ msgstr "Directory of Music"
-
-#~ msgid "Option mode"
-#~ msgstr "Option mode"
-
-#~ msgid "Random Play"
-#~ msgstr "Random Play"
-
-#~ msgid "DTMF mode"
-#~ msgstr "DTMF mode"
-
-#~ msgid "Primary domain identity for From: headers"
-#~ msgstr "Primary domain identity for From: headers"
-
-#~ msgid "From user (required by many SIP providers)"
-#~ msgstr "From user (required by many SIP providers)"
-
-#~ msgid "Ring on incoming dialplan contexts"
-#~ msgstr "Ring on incoming dialplan contexts"
-
-#~ msgid "Allow Insecure for"
-#~ msgstr "Allow Insecure for"
-
-#~ msgid "Mailbox for MWI"
-#~ msgstr "Mailbox for MWI"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "NAT between phone and Asterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "Check tags in headers"
-
-#~ msgid "Reply Timeout (ms) for down connection"
-#~ msgstr "Reply Timeout (ms) for down connection"
-
-#~ msgid "Register connection"
-#~ msgstr "Register connection"
-
-#~ msgid "Dial own extension for mailbox"
-#~ msgstr "Dial own extension for mailbox"
-
-#~ msgid "Client Type"
-#~ msgstr "Client Type"
-
-#~ msgid "Username"
-#~ msgstr "Username"
-
-#~ msgid "Section sipgeneral"
-#~ msgstr "Section sipgeneral"
-
-#~ msgid "Allow codecs"
-#~ msgstr "Allow codecs"
-
-#~ msgid "SIP realm"
-#~ msgstr "SIP realm"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "Voicemail general options"
-
-#~ msgid "From Email address of server"
-#~ msgstr "From Email address of server"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "Voice Mail boxes"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "Email contains attachment"
-
-#~ msgid "Email"
-#~ msgstr "Email"
-
-#~ msgid "Display Name"
-#~ msgstr "Display Name"
-
-#~ msgid "Password"
-#~ msgstr "Password"
-
-#~ msgid "zone"
-#~ msgstr "zone"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Voice Zone settings"
-
-#~ msgid "Message Format"
-#~ msgstr "Message Format"
diff --git a/po/en/base.po b/po/en/base.po
deleted file mode 100644
index a268751..0000000
--- a/po/en/base.po
+++ /dev/null
@@ -1,3672 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-04-03 08:44+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d minute window, %d second interval)"
-
-msgid "(%s available)"
-msgstr "(%s available)"
-
-msgid "(empty)"
-msgstr "(empty)"
-
-msgid "(no interfaces attached)"
-msgstr "(no interfaces attached)"
-
-msgid "-- Additional Field --"
-msgstr "-- Additional Field --"
-
-msgid "-- Please choose --"
-msgstr "-- Please choose --"
-
-msgid "-- custom --"
-msgstr "-- custom --"
-
-msgid "1 Minute Load:"
-msgstr "1 Minute Load:"
-
-msgid "15 Minute Load:"
-msgstr "15 Minute Load:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz 2nd channel above"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz 2nd channel below"
-
-msgid "5 Minute Load:"
-msgstr "5 Minute Load:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "AR Support"
-
-msgid "ARP retry threshold"
-msgstr "ARP retry threshold"
-
-msgid "ATM Bridges"
-msgstr "ATM Bridges"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "ATM Virtual Channel Identifier (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "ATM Virtual Path Identifier (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-
-msgid "ATM device number"
-msgstr "ATM device number"
-
-msgid "Accept router advertisements"
-msgstr "Accept router advertisements"
-
-msgid "Access Concentrator"
-msgstr "Access Concentrator"
-
-msgid "Access Point"
-msgstr "Access Point"
-
-msgid "Action"
-msgstr "Action"
-
-msgid "Actions"
-msgstr "Actions"
-
-msgid "Activate this network"
-msgstr "Activate this network"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-
-msgid "Active Connections"
-msgstr "Active Connections"
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Add"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Add local domain suffix to names served from hosts files"
-
-msgid "Add new interface..."
-msgstr "Add new interface..."
-
-msgid "Additional Hosts files"
-msgstr "Additional Hosts files"
-
-msgid "Address"
-msgstr "Address"
-
-msgid "Address to access local relay bridge"
-msgstr "Address to access local relay bridge"
-
-msgid "Administration"
-msgstr "Administration"
-
-msgid "Advanced Settings"
-msgstr "Advanced Settings"
-
-msgid "Advertise IPv6 on network"
-msgstr "Advertise IPv6 on network"
-
-msgid "Advertised network ID"
-msgstr "Advertised network ID"
-
-msgid "Alert"
-msgstr "Alert"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-
-msgid "Allow all except listed"
-msgstr "Allow all except listed"
-
-msgid "Allow listed only"
-msgstr "Allow listed only"
-
-msgid "Allow localhost"
-msgstr "Allow localhost"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr "Allow remote hosts to connect to local SSH forwarded ports"
-
-msgid "Allow root logins with password"
-msgstr "Allow root logins with password"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Allow the <em>root</em> user to login with password"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Allowed range is 1 to 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "An additional network will be created if you leave this unchecked."
-
-msgid "Antenna 1"
-msgstr "Antenna 1"
-
-msgid "Antenna 2"
-msgstr "Antenna 2"
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr "Any zone"
-
-msgid "Apply"
-msgstr "Apply"
-
-msgid "Applying changes"
-msgstr "Applying changes"
-
-msgid "Assign interfaces..."
-msgstr "Assign interfaces..."
-
-msgid "Associated Stations"
-msgstr "Associated Stations"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr "Authentication"
-
-msgid "Authoritative"
-msgstr "Authoritative"
-
-msgid "Authorization Required"
-msgstr "Authorization Required"
-
-msgid "Auto Refresh"
-msgstr "Auto Refresh"
-
-msgid "Available"
-msgstr "Available"
-
-msgid "Available packages"
-msgstr "Available packages"
-
-msgid "Average:"
-msgstr "Average:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Back"
-
-msgid "Back to Overview"
-msgstr "Back to Overview"
-
-msgid "Back to configuration"
-msgstr "Back to configuration"
-
-msgid "Back to overview"
-msgstr "Back to overview"
-
-msgid "Back to scan results"
-msgstr "Back to scan results"
-
-msgid "Background Scan"
-msgstr "Background Scan"
-
-msgid "Backup / Flash Firmware"
-msgstr "Backup / Flash Firmware"
-
-msgid "Backup / Restore"
-msgstr "Backup / Restore"
-
-msgid "Backup file list"
-msgstr "Backup file list"
-
-msgid "Bad address specified!"
-msgstr "Bad address specified!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-
-msgid "Bitrate"
-msgstr "Bitrate"
-
-msgid "Bogus NX Domain Override"
-msgstr "Bogus NX Domain Override"
-
-msgid "Bridge"
-msgstr "Bridge"
-
-msgid "Bridge interfaces"
-msgstr "Bridge interfaces"
-
-msgid "Bridge unit number"
-msgstr "Bridge unit number"
-
-msgid "Bring up on boot"
-msgstr "Bring up on boot"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr "Buffered"
-
-msgid "Buttons"
-msgstr "Buttons"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "CPU usage (%)"
-
-msgid "Cached"
-msgstr "Cached"
-
-msgid "Cancel"
-msgstr "Cancel"
-
-msgid "Chain"
-msgstr "Chain"
-
-msgid "Changes"
-msgstr "Changes"
-
-msgid "Changes applied."
-msgstr "Changes applied."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Changes the administrator password for accessing the device"
-
-msgid "Channel"
-msgstr "Channel"
-
-msgid "Check"
-msgstr "Check"
-
-msgid "Checksum"
-msgstr "Checksum"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr "Cipher"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-
-msgid "Client"
-msgstr "Client"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "Client ID to send when requesting DHCP"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-
-msgid "Close list..."
-msgstr "Close list..."
-
-msgid "Collecting data..."
-msgstr "Collecting data..."
-
-msgid "Command"
-msgstr "Command"
-
-msgid "Common Configuration"
-msgstr "Common Configuration"
-
-msgid "Compression"
-msgstr "Compression"
-
-msgid "Configuration"
-msgstr "Configuration"
-
-msgid "Configuration applied."
-msgstr "Configuration applied."
-
-msgid "Configuration files will be kept."
-msgstr "Configuration files will be kept."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "Configures this mount as overlay storage for block-extroot"
-
-msgid "Confirmation"
-msgstr "Confirmation"
-
-msgid "Connect"
-msgstr "Connect"
-
-msgid "Connected"
-msgstr "Connected"
-
-msgid "Connection Limit"
-msgstr "Connection Limit"
-
-msgid "Connections"
-msgstr "Connections"
-
-msgid "Country"
-msgstr "Country"
-
-msgid "Country Code"
-msgstr "Country Code"
-
-msgid "Cover the following interface"
-msgstr "Cover the following interface"
-
-msgid "Cover the following interfaces"
-msgstr "Cover the following interfaces"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Create / Assign firewall-zone"
-
-msgid "Create Interface"
-msgstr "Create Interface"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Create a bridge over multiple interfaces"
-
-msgid "Critical"
-msgstr "Critical"
-
-msgid "Cron Log Level"
-msgstr "Cron Log Level"
-
-msgid "Custom Interface"
-msgstr "Custom Interface"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-
-msgid "DHCP Leases"
-msgstr "DHCP Leases"
-
-msgid "DHCP Server"
-msgstr "DHCP Server"
-
-msgid "DHCP and DNS"
-msgstr "DHCP and DNS"
-
-msgid "DHCP client"
-msgstr "DHCP client"
-
-msgid "DHCP-Options"
-msgstr "DHCP-Options"
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "DNS forwardings"
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr "Debug"
-
-msgid "Default %d"
-msgstr "Default %d"
-
-msgid "Default gateway"
-msgstr "Default gateway"
-
-msgid "Default state"
-msgstr "Default state"
-
-msgid "Define a name for this network."
-msgstr "Define a name for this network."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-
-msgid "Delete"
-msgstr "Delete"
-
-msgid "Delete this interface"
-msgstr "Delete this interface"
-
-msgid "Delete this network"
-msgstr "Delete this network"
-
-msgid "Description"
-msgstr "Description"
-
-msgid "Design"
-msgstr "Design"
-
-msgid "Destination"
-msgstr "Destination"
-
-msgid "Device"
-msgstr "Device"
-
-msgid "Device Configuration"
-msgstr "Device Configuration"
-
-msgid "Diagnostics"
-msgstr "Diagnostics"
-
-msgid "Directory"
-msgstr "Directory"
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "Disable HW-Beacon timer"
-
-msgid "Disabled"
-msgstr "Disabled"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr "Distance Optimization"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distance to farthest network member in meters."
-
-msgid "Diversity"
-msgstr "Diversity"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr "Do not send probe responses"
-
-msgid "Domain required"
-msgstr "Domain required"
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Don&#39;t forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests "
-"without <abbr title=\"Domain Name System\">DNS</abbr>-Name"
-
-msgid "Download and install package"
-msgstr "Download and install package"
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr "EAP-Method"
-
-msgid "Edit"
-msgstr "Edit"
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr "Enable/Disable"
-
-msgid "Enabled"
-msgstr "Enabled"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Enables the Spanning Tree Protocol on this bridge"
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr "Encryption"
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr "Error"
-
-msgid "Ethernet Adapter"
-msgstr "Ethernet Adapter"
-
-msgid "Ethernet Switch"
-msgstr "Ethernet Switch"
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "Fast Frames"
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr "Filesystem"
-
-msgid "Filter"
-msgstr "Filter"
-
-msgid "Filter private"
-msgstr "Filter private"
-
-msgid "Filter useless"
-msgstr "Filter useless"
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr "Find package"
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr "Firewall Settings"
-
-msgid "Firewall Status"
-msgstr "Firewall Status"
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr "Flags"
-
-msgid "Flash Firmware"
-msgstr "Flash Firmware"
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr "Force"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr "Fragmentation Threshold"
-
-msgid "Frame Bursting"
-msgstr "Frame Bursting"
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr "Frequency Hopping"
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr "General Setup"
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr "Go to relevant configuration page"
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr "Handler"
-
-msgid "Hang Up"
-msgstr "Hang Up"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Host entries"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr "Hostnames"
-
-msgid "IP address"
-msgstr "IP address"
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Identity"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr "Ignore interface"
-
-msgid "Ignore resolve file"
-msgstr "Ignore resolve file"
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr "In"
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr "Initscript"
-
-msgid "Initscripts"
-msgstr "Initscripts"
-
-msgid "Install"
-msgstr "Install"
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr "Invalid input value"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Invalid username and/or password! Please try again."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr "Join Network"
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr "Kernel Log"
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr "Key"
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr "Kill"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr "Language"
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr "Leasefile"
-
-msgid "Leasetime"
-msgstr "Leasetime"
-
-msgid "Leasetime remaining"
-msgstr "Leasetime remaining"
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr "Limit"
-
-msgid "Link On"
-msgstr "Link On"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "Load"
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Local Time"
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr "Localise queries"
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr "Log queries"
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr "Login"
-
-msgid "Logout"
-msgstr "Logout"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr "MAC-Address Filter"
-
-msgid "MAC-Filter"
-msgstr "MAC-Filter"
-
-msgid "MAC-List"
-msgstr "MAC-List"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr "Maximum Rate"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr "Maximum hold time"
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memory"
-
-msgid "Memory usage (%)"
-msgstr "Memory usage (%)"
-
-msgid "Metric"
-msgstr "Metric"
-
-msgid "Minimum Rate"
-msgstr "Minimum Rate"
-
-msgid "Minimum hold time"
-msgstr "Minimum hold time"
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Mode"
-
-msgid "Modem device"
-msgstr "Modem device"
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr "Mount Point"
-
-msgid "Mount Points"
-msgstr "Mount Points"
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr "Mounted file systems"
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr "Multicast Rate"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Name"
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr "Name of the new network"
-
-msgid "Navigation"
-msgstr "Navigation"
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "Network"
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr "No chains in this table"
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr "No rules in this chain"
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr "Noise"
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "OPKG-Configuration"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr "Options"
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr "Out"
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr "Outdoor Channels"
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "Overview"
-
-msgid "Owner"
-msgstr "Owner"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr "PPPoA Encapsulation"
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "Package name"
-
-msgid "Packets"
-msgstr "Packets"
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr "Password"
-
-msgid "Password authentication"
-msgstr "Password authentication"
-
-msgid "Password of Private Key"
-msgstr "Password of Private Key"
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr "Path to CA-Certificate"
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "Path to Private Key"
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr "Perform reboot"
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr "Physical Settings"
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr "Pkts."
-
-msgid "Please enter your username and password."
-msgstr "Please enter your username and password."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Please wait: Device rebooting..."
-
-msgid "Policy"
-msgstr "Policy"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr "Prevents client-to-client communication"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Proceed"
-
-msgid "Processes"
-msgstr "Processes"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS Threshold"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Reboot"
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr "Reboots the operating system of your device"
-
-msgid "Receive"
-msgstr "Receive"
-
-msgid "Receiver Antenna"
-msgstr "Receiver Antenna"
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr "References"
-
-msgid "Regulatory Domain"
-msgstr "Regulatory Domain"
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr "Remove"
-
-msgid "Repeat scan"
-msgstr "Repeat scan"
-
-msgid "Replace entry"
-msgstr "Replace entry"
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Reset"
-
-msgid "Reset Counters"
-msgstr "Reset Counters"
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr "Restart"
-
-msgid "Restart Firewall"
-msgstr "Restart Firewall"
-
-msgid "Restore backup"
-msgstr "Restore backup"
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr "Revert"
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr "Routes"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-
-msgid "Rule #"
-msgstr "Rule #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Save"
-
-msgid "Save & Apply"
-msgstr "Save & Apply"
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr "Scan"
-
-msgid "Scheduled Tasks"
-msgstr "Scheduled Tasks"
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr "Separate Clients"
-
-msgid "Separate WDS"
-msgstr "Separate WDS"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "Services"
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr "Signal"
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr "Size"
-
-msgid "Skip"
-msgstr "Skip"
-
-msgid "Skip to content"
-msgstr "Skip to content"
-
-msgid "Skip to navigation"
-msgstr "Skip to navigation"
-
-msgid "Slot time"
-msgstr "Slot time"
-
-msgid "Software"
-msgstr "Software"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr "Source"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr "Specifies the button state to handle"
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr "Start"
-
-msgid "Start priority"
-msgstr "Start priority"
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr "Static IPv4 Routes"
-
-msgid "Static IPv6 Routes"
-msgstr "Static IPv6 Routes"
-
-msgid "Static Leases"
-msgstr "Static Leases"
-
-msgid "Static Routes"
-msgstr "Static Routes"
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Stop"
-msgstr "Stop"
-
-msgid "Strict order"
-msgstr "Strict order"
-
-msgid "Submit"
-msgstr "Submit"
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr "Switch"
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr "System"
-
-msgid "System Log"
-msgstr "System Log"
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr "Table"
-
-msgid "Target"
-msgstr "Target"
-
-msgid "Terminate"
-msgstr "Terminate"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr "The following changes have been reverted"
-
-msgid "The following rules are currently active on this system."
-msgstr "The following rules are currently active on this system."
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "This is the system crontab in which scheduled tasks can be defined."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"This list gives an overview over currently running system processes and "
-"their status."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "This page gives an overview over currently active network connections."
-
-msgid "This section contains no values yet"
-msgstr "This section contains no values yet"
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Timezone"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "Traffic"
-
-msgid "Transfer"
-msgstr "Transfer"
-
-msgid "Transmission Rate"
-msgstr "Transmission Rate"
-
-msgid "Transmit"
-msgstr "Transmit"
-
-msgid "Transmit Power"
-msgstr "Transmit Power"
-
-msgid "Transmitter Antenna"
-msgstr "Transmitter Antenna"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "Turbo Mode"
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr "Type"
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Unsaved Changes"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr "Uploaded File"
-
-msgid "Uptime"
-msgstr "Uptime"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Use <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Used"
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr "Username"
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "Version"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr "WMM Mode"
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Warning: There are unsaved changes that will be lost while rebooting!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr "Wireless Adapter"
-
-msgid "Wireless Network"
-msgstr "Wireless Network"
-
-msgid "Wireless Overview"
-msgstr "Wireless Overview"
-
-msgid "Wireless Security"
-msgstr "Wireless Security"
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr "XR Support"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "creates a bridge over specified interface(s)"
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "disable"
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "help"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "if target is a network"
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-
-msgid "no"
-msgstr ""
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "none"
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr ""
-
-msgid "unspecified"
-msgstr ""
-
-msgid "unspecified -or- create:"
-msgstr "unspecified -or- create:"
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr ""
-
-msgid "« Back"
-msgstr "« Back"
-
-#~ msgid "Active Leases"
-#~ msgstr "Active Leases"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Bit Rate"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Configuration / Apply"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Configuration / Changes"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Configuration / Revert"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">Encr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-
-#~ msgid "Create Network"
-#~ msgstr "Create Network"
-
-#~ msgid "Link"
-#~ msgstr "Link"
-
-#~ msgid "Networks"
-#~ msgstr "Networks"
-
-#~ msgid "Power"
-#~ msgstr "Power"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Wifi networks in your local environment"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Files to be kept when flashing a new firmware"
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Post-commit actions"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "ARP ping retries"
-
-#~ msgid "ATM Settings"
-#~ msgstr "ATM Settings"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "Accept Router Advertisements"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Access point (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Additional pppd options"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "Allowed range is 1 to FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Automatic Disconnect"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Backup Archive"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-
-#~ msgid "Connect script"
-#~ msgstr "Connect script"
-
-#~ msgid "Create backup"
-#~ msgstr "Create backup"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Disconnect script"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Edit package lists and installation targets"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Enable IPv6 on PPP link"
-
-#~ msgid "Firmware image"
-#~ msgstr "Firmware image"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-
-#~ msgid "Installation targets"
-#~ msgstr "Installation targets"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Keep configuration files"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "Let pppd run this script after establishing the PPP link"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Let pppd run this script before tearing down the PPP link"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "Number of failed connection tests to initiate automatic reconnect"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN code"
-
-#~ msgid "PPP Settings"
-#~ msgstr "PPP Settings"
-
-#~ msgid "Package lists"
-#~ msgstr "Package lists"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Proceed reverting all settings and resetting to firmware defaults?"
-
-#~ msgid "Processor"
-#~ msgstr "Processor"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-Port"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-Server"
-
-#~ msgid "Replace default route"
-#~ msgstr "Replace default route"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Reset router to defaults"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-
-#~ msgid "Service type"
-#~ msgstr "Service type"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Services and daemons perform certain tasks on your device."
-
-#~ msgid "Settings"
-#~ msgstr "Settings"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Setup wait time"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Specify additional command line arguments for pppd here"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "The device node of your modem, e.g. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "Time (in seconds) after which an unused connection will be closed"
-
-#~ msgid "Update package lists"
-#~ msgstr "Update package lists"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Upload an OpenWrt image file to reflash the device."
-
-#~ msgid "Upload image"
-#~ msgstr "Upload image"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Use peer DNS"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-
-#~ msgid "back"
-#~ msgstr "back"
-
-#~ msgid "buffered"
-#~ msgstr "buffered"
-
-#~ msgid "cached"
-#~ msgstr "cached"
-
-#~ msgid "free"
-#~ msgstr "free"
-
-#~ msgid "static"
-#~ msgstr "static"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "About"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "Active IP Connections"
-
-#~ msgid "Addresses"
-#~ msgstr "Addresses"
-
-#~ msgid "Admin Password"
-#~ msgstr "Admin Password"
-
-#~ msgid "Alias"
-#~ msgstr "Alias"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Authentication Realm"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Bridge Port"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Client + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Configuration file"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Connection timeout"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Contributing Developers"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP assigned"
-
-#~ msgid "Document root"
-#~ msgstr "Document root"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Enable Keep-Alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Ethernet Bridge"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP Configuration"
-
-#~ msgid "Interface Status"
-#~ msgstr "Interface Status"
-
-#~ msgid "Lead Development"
-#~ msgstr "Lead Development"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "Not configured"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Password successfully changed"
-
-#~ msgid "Plugin path"
-#~ msgstr "Plugin path"
-
-#~ msgid "Ports"
-#~ msgstr "Ports"
-
-#~ msgid "Primary"
-#~ msgstr "Primary"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Project Homepage"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Thanks To"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Unknown Error"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "defaults to <code>/etc/httpd.conf</code>"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG error code %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Package lists updated"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Upgrade installed packages"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-
-#~ msgid "Search file..."
-#~ msgstr "Search file..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "And now have fun with your router!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-
-#~ msgid "Hello!"
-#~ msgstr "Hello!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "User Interface"
-
-#~ msgid "enable"
-#~ msgstr "enable"
-
-#~ msgid "(hidden)"
-#~ msgstr "(hidden)"
-
-#~ msgid "(optional)"
-#~ msgstr "(optional)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP-Isolation"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Add the Wifi network to physical network"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Attach to existing network"
-#~ msgstr "Attach to existing network"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Create Or Attach Network"
-
-#~ msgid "DHCP"
-#~ msgstr "DHCP"
-
-#~ msgid "Devices"
-#~ msgstr "Devices"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Don&#39;t forward reverse lookups for local networks"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Enable TFTP-Server"
-
-#~ msgid "Errors"
-#~ msgstr "Errors"
-
-#~ msgid "Essentials"
-#~ msgstr "Essentials"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Expand Hosts"
-
-#~ msgid "First leased address"
-#~ msgstr "First leased address"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Hardware Address"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Here you can configure installed wifi devices."
-
-#~ msgid ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-#~ msgstr ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignore <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Independent (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Internet Connection"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Join (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Leases"
-
-#~ msgid "Local Domain"
-#~ msgstr "Local Domain"
-
-#~ msgid "Local Network"
-#~ msgstr "Local Network"
-
-#~ msgid "Local Server"
-#~ msgstr "Local Server"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Network Boot Image"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Number of leased addresses"
-
-#~ msgid "Path"
-#~ msgstr "Path"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Perform Actions"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Prevents Client to Client communication"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Provide (Access Point)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Resolvfile"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "TFTP-Server Root"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "The following changes have been applied"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-
-#~ msgid "Wireless Scan"
-#~ msgstr "Wireless Scan"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-
-#~ msgid ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-#~ msgstr ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-
-#~ msgid ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-#~ msgstr ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-
-#~ msgid ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-#~ msgstr ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-
-#~ msgid "Zone"
-#~ msgstr "Zone"
-
-#~ msgid "additional hostfile"
-#~ msgstr "additional hostfile"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "adds domain names to hostentries in the resolv file"
-
-#~ msgid "automatic"
-#~ msgstr "automatic"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "automatically reconnect"
-
-#~ msgid "concurrent queries"
-#~ msgstr "concurrent queries"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "disconnect when idle for"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "don&#39;t cache unknown"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-
-#~ msgid "installed"
-#~ msgstr "installed"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "localises the hostname depending on its subnet"
-
-#~ msgid "manual"
-#~ msgstr "manual"
-
-#~ msgid "not installed"
-#~ msgstr "not installed"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-
-#~ msgid "query port"
-#~ msgstr "query port"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmitted / received"
-
-#~ msgid "all"
-#~ msgstr "all"
-
-#~ msgid "Code"
-#~ msgstr "Code"
-
-#~ msgid "Distance"
-#~ msgstr "Distance"
-
-#~ msgid "Legend"
-#~ msgstr "Legend"
-
-#~ msgid "Library"
-#~ msgstr "Library"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "see &#39;%s&#39; manpage"
-
-#~ msgid "Package Manager"
-#~ msgstr "Package Manager"
-
-#~ msgid "Service"
-#~ msgstr "Service"
-
-#~ msgid "Statistics"
-#~ msgstr "Statistics"
-
-#~ msgid "zone"
-#~ msgstr "Zone"
diff --git a/po/en/commands.po b/po/en/commands.po
deleted file mode 100644
index 754a229..0000000
--- a/po/en/commands.po
+++ /dev/null
@@ -1,95 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "A short textual description of the configured command"
-msgstr "A short textual description of the configured command"
-
-msgid "Access command with"
-msgstr "Access command with"
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr "Allow the user to provide additional command line arguments"
-
-msgid "Arguments:"
-msgstr "Arguments:"
-
-msgid "Binary data not displayed, download instead."
-msgstr "Binary data not displayed, download instead."
-
-msgid "Code:"
-msgstr "Code:"
-
-msgid "Collecting data..."
-msgstr "Collecting data..."
-
-msgid "Command"
-msgstr "Command"
-
-msgid "Command failed"
-msgstr "Command failed"
-
-msgid "Command line to execute"
-msgstr "Command line to execute"
-
-msgid "Command successful"
-msgstr "Command successful"
-
-msgid "Command:"
-msgstr "Command:"
-
-msgid "Configure"
-msgstr "Configure"
-
-msgid "Custom Commands"
-msgstr "Custom Commands"
-
-msgid "Custom arguments"
-msgstr "Custom arguments"
-
-msgid "Dashboard"
-msgstr "Dashboard"
-
-msgid "Description"
-msgstr "Description"
-
-msgid "Download"
-msgstr "Download"
-
-msgid "Failed to execute command!"
-msgstr "Failed to execute command!"
-
-msgid "Link"
-msgstr "Link"
-
-msgid "Loading"
-msgstr "Loading"
-
-msgid "Public access"
-msgstr "Public access"
-
-msgid "Run"
-msgstr "Run"
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-
-msgid "Waiting for command to complete..."
-msgstr "Waiting for command to complete..."
diff --git a/po/en/coovachilli.po b/po/en/coovachilli.po
deleted file mode 100644
index ebaa345..0000000
--- a/po/en/coovachilli.po
+++ /dev/null
@@ -1,639 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-03-18 05:30+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
-
-#, fuzzy
-#~ msgid "General configuration"
-#~ msgstr "General configuration"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "General CoovaChilli settings"
-
-#~ msgid "Command socket"
-#~ msgstr "Command socket"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "UNIX socket used for communication with chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Config refresh interval"
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-
-#~ msgid "Pid file"
-#~ msgstr "Pid file"
-
-#~ msgid "Filename to put the process id"
-#~ msgstr "Filename to put the process id"
-
-#~ msgid "State directory"
-#~ msgstr "State directory"
-
-#~ msgid "Directory of non-volatile data"
-#~ msgstr "Directory of non-volatile data"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "TUN/TAP configuration"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Network/Tun configuration"
-
-#~ msgid "Network down script"
-#~ msgstr "Network down script"
-
-#~ msgid ""
-#~ "Script executed after a session has moved from authorized state to "
-#~ "unauthorized"
-#~ msgstr ""
-#~ "Script executed after a session has moved from authorized state to "
-#~ "unauthorized"
-
-#~ msgid "Network up script"
-#~ msgstr "Network up script"
-
-#~ msgid "Script executed after the tun network interface has been brought up"
-#~ msgstr "Script executed after the tun network interface has been brought up"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Primary DNS Server"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Secondary DNS Server"
-
-#~ msgid "Domain name"
-#~ msgstr "Domain name"
-
-#~ msgid ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-#~ msgstr ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Dynamic IP address pool"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Specifies a pool of dynamic IP addresses"
-
-#~ msgid "IP down script"
-#~ msgstr "IP down script"
-
-#~ msgid "Script executed after the tun network interface has been taken down"
-#~ msgstr "Script executed after the tun network interface has been taken down"
-
-#~ msgid "IP up script"
-#~ msgstr "IP up script"
-
-#~ msgid ""
-#~ "Script executed after the TUN/TAP network interface has been brought up"
-#~ msgstr ""
-#~ "Script executed after the TUN/TAP network interface has been brought up"
-
-#~ msgid "Uplink subnet"
-#~ msgstr "Uplink subnet"
-
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr "Network address of the uplink interface (CIDR notation)"
-
-#~ msgid "Static IP address pool"
-#~ msgstr "Static IP address pool"
-
-#~ msgid "Specifies a pool of static IP addresses"
-#~ msgstr "Specifies a pool of static IP addresses"
-
-#~ msgid "TUN/TAP device"
-#~ msgstr "TUN/TAP device"
-
-#~ msgid "The specific device to use for the TUN/TAP interface"
-#~ msgstr "The specific device to use for the TUN/TAP interface"
-
-#~ msgid "TX queue length"
-#~ msgstr "TX queue length"
-
-#~ msgid "The TX queue length to set on the TUN/TAP interface"
-#~ msgstr "The TX queue length to set on the TUN/TAP interface"
-
-#~ msgid "Use TAP device"
-#~ msgstr "Use TAP device"
-
-#~ msgid "Use the TAP interface instead of TUN"
-#~ msgstr "Use the TAP interface instead of TUN"
-
-#~ msgid "DHCP configuration"
-#~ msgstr "DHCP configuration"
-
-#~ msgid "Set DHCP options for connecting clients"
-#~ msgstr "Set DHCP options for connecting clients"
-
-#~ msgid "DHCP end number"
-#~ msgstr "DHCP end number"
-
-#~ msgid "Where to stop assigning IP addresses (default 254)"
-#~ msgstr "Where to stop assigning IP addresses (default 254)"
-
-#~ msgid "DHCP interface"
-#~ msgstr "DHCP interface"
-
-#~ msgid "Ethernet interface to listen to for the downlink interface"
-#~ msgstr "Ethernet interface to listen to for the downlink interface"
-
-#~ msgid "Listen MAC address"
-#~ msgstr "Listen MAC address"
-
-#~ msgid ""
-#~ "MAC address to listen to. If not specified the MAC address of the "
-#~ "interface will be used"
-#~ msgstr ""
-#~ "MAC address to listen to. If not specified the MAC address of the "
-#~ "interface will be used"
-
-#~ msgid "DHCP start number"
-#~ msgstr "DHCP start number"
-
-#~ msgid "Where to start assigning IP addresses (default 10)"
-#~ msgstr "Where to start assigning IP addresses (default 10)"
-
-#~ msgid "Enable IEEE 802.1x"
-#~ msgstr "Enable IEEE 802.1x"
-
-#~ msgid "Enable IEEE 802.1x authentication and listen for EAP requests"
-#~ msgstr "Enable IEEE 802.1x authentication and listen for EAP requests"
-
-#~ msgid "Leasetime"
-#~ msgstr "Leasetime"
-
-#~ msgid "Use a DHCP lease of seconds (default 600)"
-#~ msgstr "Use a DHCP lease of seconds (default 600)"
-
-#~ msgid "Allow session update through RADIUS"
-#~ msgstr "Allow session update through RADIUS"
-
-#~ msgid ""
-#~ "Allow updating of session parameters with RADIUS attributes sent in "
-#~ "Accounting-Response"
-#~ msgstr ""
-#~ "Allow updating of session parameters with RADIUS attributes sent in "
-#~ "Accounting-Response"
-
-#~ msgid "Admin password"
-#~ msgstr "Admin password"
-
-#~ msgid ""
-#~ "Password to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Password to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-
-#~ msgid "Admin user"
-#~ msgstr "Admin user"
-
-#~ msgid ""
-#~ "User-name to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "User-name to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-
-#~ msgid "Do not check disconnection requests"
-#~ msgstr "Do not check disconnection requests"
-
-#~ msgid "Do not check the source IP address of radius disconnect requests"
-#~ msgstr "Do not check the source IP address of radius disconnect requests"
-
-#~ msgid "RADIUS disconnect port"
-#~ msgstr "RADIUS disconnect port"
-
-#~ msgid "UDP port to listen to for accepting radius disconnect requests"
-#~ msgstr "UDP port to listen to for accepting radius disconnect requests"
-
-#~ msgid "NAS IP"
-#~ msgstr "NAS IP"
-
-#~ msgid "Value to use in RADIUS NAS-IP-Address attribute"
-#~ msgstr "Value to use in RADIUS NAS-IP-Address attribute"
-
-#~ msgid "NAS MAC"
-#~ msgstr "NAS MAC"
-
-#~ msgid "MAC address value to use in RADIUS Called-Station-ID attribute"
-#~ msgstr "MAC address value to use in RADIUS Called-Station-ID attribute"
-
-#~ msgid "Allow OpenID authentication"
-#~ msgstr "Allow OpenID authentication"
-
-#~ msgid ""
-#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
-#~ "openidauth in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
-#~ "openidauth in RADIUS Access-Requests"
-
-#~ msgid "RADIUS accounting port"
-#~ msgstr "RADIUS accounting port"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius accounting requests (default 1813)"
-#~ msgstr ""
-#~ "The UDP port number to use for radius accounting requests (default 1813)"
-
-#~ msgid "RADIUS authentication port"
-#~ msgstr "RADIUS authentication port"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius authentication requests (default "
-#~ "1812)"
-#~ msgstr ""
-#~ "The UDP port number to use for radius authentication requests (default "
-#~ "1812)"
-
-#~ msgid "Option radiuscalled"
-#~ msgstr "Option radiuscalled"
-
-#~ msgid "RADIUS listen address"
-#~ msgstr "RADIUS listen address"
-
-#~ msgid "Local interface IP address to use for the radius interface"
-#~ msgstr "Local interface IP address to use for the radius interface"
-
-#~ msgid "RADIUS location ID"
-#~ msgstr "RADIUS location ID"
-
-#~ msgid "WISPr Location ID"
-#~ msgstr "WISPr Location ID"
-
-#~ msgid "RADIUS location name"
-#~ msgstr "RADIUS location name"
-
-#~ msgid "WISPr Location Name"
-#~ msgstr "WISPr Location Name"
-
-#~ msgid "NAS ID"
-#~ msgstr "NAS ID"
-
-#~ msgid "Network access server identifier"
-#~ msgstr "Network access server identifier"
-
-#~ msgid "Option radiusnasip"
-#~ msgstr "Option radiusnasip"
-
-#~ msgid "NAS port type"
-#~ msgstr "NAS port type"
-
-#~ msgid ""
-#~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
-#~ msgstr ""
-#~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
-
-#~ msgid "Send RADIUS VSA"
-#~ msgstr "Send RADIUS VSA"
-
-#~ msgid "Send the ChilliSpot-OriginalURL RADIUS VSA in Access-Request"
-#~ msgstr "Send the ChilliSpot-OriginalURL RADIUS VSA in Access-Request"
-
-#~ msgid "RADIUS secret"
-#~ msgstr "RADIUS secret"
-
-#~ msgid "Radius shared secret for both servers"
-#~ msgstr "Radius shared secret for both servers"
-
-#~ msgid "RADIUS server 1"
-#~ msgstr "RADIUS server 1"
-
-#~ msgid "The IP address of radius server 1"
-#~ msgstr "The IP address of radius server 1"
-
-#~ msgid "RADIUS server 2"
-#~ msgstr "RADIUS server 2"
-
-#~ msgid "The IP address of radius server 2"
-#~ msgstr "The IP address of radius server 2"
-
-#~ msgid "Swap octets"
-#~ msgstr "Swap octets"
-
-#~ msgid ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
-#~ "to RADIUS attribtues"
-#~ msgstr ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
-#~ "to RADIUS attribtues"
-
-#~ msgid "Allow WPA guests"
-#~ msgstr "Allow WPA guests"
-
-#~ msgid ""
-#~ "Allows WPA Guest authentication by sending ChilliSpot-Config=allow-wpa-"
-#~ "guests in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Allows WPA Guest authentication by sending ChilliSpot-Config=allow-wpa-"
-#~ "guests in RADIUS Access-Requests"
-
-#~ msgid "Proxy client"
-#~ msgstr "Proxy client"
-
-#~ msgid ""
-#~ "IP address from which radius requests are accepted. If omitted the server "
-#~ "will not accept radius requests"
-#~ msgstr ""
-#~ "IP address from which radius requests are accepted. If omitted the server "
-#~ "will not accept radius requests"
-
-#~ msgid "Proxy listen address"
-#~ msgstr "Proxy listen address"
-
-#~ msgid "Local interface IP address to use for accepting radius requests"
-#~ msgstr "Local interface IP address to use for accepting radius requests"
-
-#~ msgid "Proxy port"
-#~ msgstr "Proxy port"
-
-#~ msgid "UDP Port to listen to for accepting radius requests"
-#~ msgstr "UDP Port to listen to for accepting radius requests"
-
-#~ msgid "Proxy secret"
-#~ msgstr "Proxy secret"
-
-#~ msgid "Radius shared secret for clients"
-#~ msgstr "Radius shared secret for clients"
-
-#~ msgid "UAM configuration"
-#~ msgstr "UAM configuration"
-
-#~ msgid "Unified Configuration Method settings"
-#~ msgstr "Unified Configuration Method settings"
-
-#~ msgid "Use Chilli XML"
-#~ msgstr "Use Chilli XML"
-
-#~ msgid "Return the so-called Chilli XML along with WISPr XML"
-#~ msgstr "Return the so-called Chilli XML along with WISPr XML"
-
-#~ msgid "Default idle timeout"
-#~ msgstr "Default idle timeout"
-
-#~ msgid "Default idle timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr "Default idle timeout unless otherwise set by RADIUS (defaults to 0)"
-
-#~ msgid "Default interim interval"
-#~ msgstr "Default interim interval"
-
-#~ msgid ""
-#~ "Default interim-interval for RADIUS accounting unless otherwise set by "
-#~ "RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Default interim-interval for RADIUS accounting unless otherwise set by "
-#~ "RADIUS (defaults to 0)"
-
-#~ msgid "Default session timeout"
-#~ msgstr "Default session timeout"
-
-#~ msgid ""
-#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-
-#~ msgid "Inspect DNS traffic"
-#~ msgstr "Inspect DNS traffic"
-
-#~ msgid ""
-#~ "Inspect DNS packets and drop responses with any non- A, CNAME, SOA, or MX "
-#~ "records to prevent dns tunnels (experimental)"
-#~ msgstr ""
-#~ "Inspect DNS packets and drop responses with any non- A, CNAME, SOA, or MX "
-#~ "records to prevent dns tunnels (experimental)"
-
-#~ msgid "Local users file"
-#~ msgstr "Local users file"
-
-#~ msgid ""
-#~ "A colon seperated file containing usernames and passwords of locally "
-#~ "authenticated users"
-#~ msgstr ""
-#~ "A colon seperated file containing usernames and passwords of locally "
-#~ "authenticated users"
-
-#~ msgid "Location name"
-#~ msgstr "Location name"
-
-#~ msgid "Human readable location name used in JSON interface"
-#~ msgstr "Human readable location name used in JSON interface"
-
-#~ msgid "Do not redirect to UAM server"
-#~ msgstr "Do not redirect to UAM server"
-
-#~ msgid ""
-#~ "Do not return to UAM server on login success, just redirect to original "
-#~ "URL"
-#~ msgstr ""
-#~ "Do not return to UAM server on login success, just redirect to original "
-#~ "URL"
-
-#~ msgid "Do not do WISPr"
-#~ msgstr "Do not do WISPr"
-
-#~ msgid "Do not do any WISPr XML, assume the back-end is doing this instead"
-#~ msgstr "Do not do any WISPr XML, assume the back-end is doing this instead"
-
-#~ msgid "Post auth proxy"
-#~ msgstr "Post auth proxy"
-
-#~ msgid ""
-#~ "Used with postauthproxyport to define a post authentication HTTP proxy "
-#~ "server"
-#~ msgstr ""
-#~ "Used with postauthproxyport to define a post authentication HTTP proxy "
-#~ "server"
-
-#~ msgid "Post auth proxy port"
-#~ msgstr "Post auth proxy port"
-
-#~ msgid ""
-#~ "Used with postauthproxy to define a post authentication HTTP proxy server"
-#~ msgstr ""
-#~ "Used with postauthproxy to define a post authentication HTTP proxy server"
-
-#~ msgid "Allowed resources"
-#~ msgstr "Allowed resources"
-
-#~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr ""
-#~ "List of resources the client can access without first authenticating"
-
-#~ msgid "Allow any DNS server"
-#~ msgstr "Allow any DNS server"
-
-#~ msgid "Allow any DNS server for unauthenticated clients"
-#~ msgstr "Allow any DNS server for unauthenticated clients"
-
-#~ msgid "Allow any IP address"
-#~ msgstr "Allow any IP address"
-
-#~ msgid ""
-#~ "Allow clients to use any IP settings they wish by spoofing ARP "
-#~ "(experimental)"
-#~ msgstr ""
-#~ "Allow clients to use any IP settings they wish by spoofing ARP "
-#~ "(experimental)"
-
-#~ msgid "Allowed domains"
-#~ msgstr "Allowed domains"
-
-#~ msgid ""
-#~ "Defines a list of domain names to automatically add to the walled garden"
-#~ msgstr ""
-#~ "Defines a list of domain names to automatically add to the walled garden"
-
-#~ msgid "UAM homepage"
-#~ msgstr "UAM homepage"
-
-#~ msgid "URL of homepage to redirect unauthenticated users to"
-#~ msgstr "URL of homepage to redirect unauthenticated users to"
-
-#~ msgid "UAM static content port"
-#~ msgstr "UAM static content port"
-
-#~ msgid "TCP port to bind to for only serving embedded content"
-#~ msgstr "TCP port to bind to for only serving embedded content"
-
-#~ msgid "UAM listening address"
-#~ msgstr "UAM listening address"
-
-#~ msgid "IP address to listen to for authentication of clients"
-#~ msgstr "IP address to listen to for authentication of clients"
-
-#~ msgid "UAM logout IP"
-#~ msgstr "UAM logout IP"
-
-#~ msgid ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults "
-#~ "to 1.1.1.1)"
-#~ msgstr ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults "
-#~ "to 1.1.1.1)"
-
-#~ msgid "UAM listening port"
-#~ msgstr "UAM listening port"
-
-#~ msgid "TCP port to bind to for authenticating clients (default 3990)"
-#~ msgstr "TCP port to bind to for authenticating clients (default 3990)"
-
-#~ msgid "UAM secret"
-#~ msgstr "UAM secret"
-
-#~ msgid "Shared secret between uamserver and chilli"
-#~ msgstr "Shared secret between uamserver and chilli"
-
-#~ msgid "UAM server"
-#~ msgstr "UAM server"
-
-#~ msgid "URL of web server to use for authenticating clients"
-#~ msgstr "URL of web server to use for authenticating clients"
-
-#~ msgid "UAM user interface"
-#~ msgstr "UAM user interface"
-
-#~ msgid ""
-#~ "An init.d style program to handle local content on the uamuiport web "
-#~ "server"
-#~ msgstr ""
-#~ "An init.d style program to handle local content on the uamuiport web "
-#~ "server"
-
-#~ msgid "Use status file"
-#~ msgstr "Use status file"
-
-#~ msgid ""
-#~ "Write the status of clients in a non-volatile state file (experimental)"
-#~ msgstr ""
-#~ "Write the status of clients in a non-volatile state file (experimental)"
-
-#~ msgid "WISPr login url"
-#~ msgstr "WISPr login url"
-
-#~ msgid "Specific URL to be given in WISPr XML LoginURL"
-#~ msgstr "Specific URL to be given in WISPr XML LoginURL"
-
-#~ msgid "CGI program"
-#~ msgstr "CGI program"
-
-#~ msgid ""
-#~ "Executable to run as a CGI type program (like haserl) for URLs with "
-#~ "extention .chi"
-#~ msgstr ""
-#~ "Executable to run as a CGI type program (like haserl) for URLs with "
-#~ "extention .chi"
-
-#~ msgid "Web content directory"
-#~ msgstr "Web content directory"
-
-#~ msgid "Directory where embedded local web content is placed"
-#~ msgstr "Directory where embedded local web content is placed"
-
-#~ msgid "MAC configuration"
-#~ msgstr "MAC configuration"
-
-#~ msgid "Configure MAC authentication"
-#~ msgstr "Configure MAC authentication"
-
-#~ msgid "Allowed MAC addresses"
-#~ msgstr "Allowed MAC addresses"
-
-#~ msgid "List of MAC addresses for which MAC authentication will be performed"
-#~ msgstr ""
-#~ "List of MAC addresses for which MAC authentication will be performed"
-
-#~ msgid "Authenticate locally allowed MACs"
-#~ msgstr "Authenticate locally allowed MACs"
-
-#~ msgid "Authenticate allowed MAC addresses without the use of RADIUS"
-#~ msgstr "Authenticate allowed MAC addresses without the use of RADIUS"
-
-#~ msgid "Enable MAC authentification"
-#~ msgstr "Enable MAC authentification"
-
-#~ msgid "Try to authenticate all users based on their mac address alone"
-#~ msgstr "Try to authenticate all users based on their mac address alone"
-
-#~ msgid "Password"
-#~ msgstr "Password"
-
-#~ msgid "Password used when performing MAC authentication"
-#~ msgstr "Password used when performing MAC authentication"
-
-#~ msgid "Suffix"
-#~ msgstr "Suffix"
-
-#~ msgid "coovachilli_macauth_macsuffix_desc"
-#~ msgstr ""
-#~ "Suffix to add to the MAC address in order to form the User-Name, which is "
-#~ "sent to the radius server"
diff --git a/po/en/ddns.po b/po/en/ddns.po
deleted file mode 100644
index 13d9560..0000000
--- a/po/en/ddns.po
+++ /dev/null
@@ -1,88 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Check for changed IP every"
-msgstr "Check for changed IP every"
-
-msgid "Check-time unit"
-msgstr "Check-time unit"
-
-msgid "Custom update-URL"
-msgstr "Custom update-URL"
-
-msgid "Dynamic DNS"
-msgstr "Dynamic DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-
-msgid "Enable"
-msgstr "Enable"
-
-msgid "Event interface"
-msgstr "Event interface"
-
-msgid "Force update every"
-msgstr "Force update every"
-
-msgid "Force-time unit"
-msgstr "Force-time unit"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Network"
-msgstr "Network"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "On which interface up should start the ddns script process."
-
-msgid "Password"
-msgstr "Password"
-
-msgid "Service"
-msgstr "Service"
-
-msgid "Source of IP address"
-msgstr "Source of IP address"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Username"
-
-msgid "custom"
-msgstr "custom"
-
-# Hours
-msgid "h"
-msgstr "h"
-
-msgid "interface"
-msgstr "interface"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
-
-msgid "network"
-msgstr "network"
diff --git a/po/en/diag_core.po b/po/en/diag_core.po
deleted file mode 100644
index aa030ef..0000000
--- a/po/en/diag_core.po
+++ /dev/null
@@ -1,42 +0,0 @@
-# Diagnostics Core.
-# Copyright (C) 2009 Daniel Dickinson.
-# Daniel Dickinson <crazycshore@gmail.com>, 2009.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: diag-core 0.1\n"
-"PO-Revision-Date: 2009-07-17 04:54-0400\n"
-"Last-Translator: Daniel Dickinson <crazycshore@gmail.com>\n"
-"Language-Team: en <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configure Diagnostics"
-msgstr "Configure Diagnostics"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-
-#~ msgid "l_d_diag"
-#~ msgstr "Diagnostics"
diff --git a/po/en/diag_devinfo.po b/po/en/diag_devinfo.po
deleted file mode 100644
index 7adbbea..0000000
--- a/po/en/diag_devinfo.po
+++ /dev/null
@@ -1,213 +0,0 @@
-# Diagnostics (Device Info).
-# Copyright (C) 2009 Daniel Dickinson
-# Daniel Dickinson <crazycshore@gmail.com>, 2009.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2009-07-17 04:22-0400\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr "Add"
-
-msgid "Beginning of MAC address range"
-msgstr "Beginning of MAC address range"
-
-msgid "Config Phone Scan"
-msgstr "Config Phone Scan"
-
-msgid "Configure"
-msgstr "Configure"
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr "Delete"
-
-msgid "Device Scan Config"
-msgstr "Device Scan Config"
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr ""
-
-msgid "Devices on Network"
-msgstr "Devices on Network"
-
-msgid "Edit"
-msgstr "Edit"
-
-msgid "Enable"
-msgstr "Enable"
-
-msgid "End of MAC address range"
-msgstr "End of MAC address range"
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr "IP Address"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Invalid"
-msgstr "Invalid"
-
-msgid "Link to Device"
-msgstr "Link to Device"
-
-msgid "MAC Address"
-msgstr "MAC Address"
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr "MAC Device Override"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr "MAC range and information used to override system and IEEE databases"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Milliseconds to sleep between requests (default 100)"
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr "Name"
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr "No SIP devices"
-
-msgid "No devices detected"
-msgstr "No devices detected"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Number of times to send requests (default 1)"
-
-msgid "OUI Owner"
-msgstr "OUI Owner"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr "Phone Information"
-
-msgid "Phone Scan"
-msgstr "Phone Scan"
-
-msgid "Phone Scanning Configuration"
-msgstr "Phone Scanning Configuration"
-
-msgid "Phones"
-msgstr "Phones"
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr "Raw"
-
-msgid "Repeat Count"
-msgstr "Repeat Count"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr "SIP Device Information"
-
-msgid "SIP Device Scan"
-msgstr "SIP Device Scan"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "SIP Device Scanning Configuration"
-
-msgid "SIP Devices on Network"
-msgstr "SIP Devices on Network"
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr "Scan for devices on specified networks."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr "Scans for devices on specified networks."
-
-msgid "Sleep Between Requests"
-msgstr "Sleep Between Requests"
-
-msgid "Subnet"
-msgstr "Subnet"
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Time to wait for responses in seconds (default 10)"
-
-msgid "Timeout"
-msgstr "Timeout"
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr "check other networks"
diff --git a/po/en/ffwizard.po b/po/en/ffwizard.po
deleted file mode 100644
index ac523a4..0000000
--- a/po/en/ffwizard.po
+++ /dev/null
@@ -1,171 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-15 17:26+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: none\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Allow to transfer anonymous statistics about this node"
-
-msgid "Channel"
-msgstr "Channel"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr "Check this to protect your LAN from other nodes or clients"
-
-msgid "Configure network"
-msgstr "Configure network"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr "Connect your node with other nodes with a tunnel via the internet."
-
-msgid "DHCP IP range"
-msgstr "DHCP IP range"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP will automatically assign ip addresses to clients"
-
-msgid "DNS Server"
-msgstr "DNS Server"
-
-msgid "Enable DHCP"
-msgstr "Enable DHCP"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "Heartbeat"
-msgstr "Heartbeat"
-
-msgid "IP address"
-msgstr "IP address"
-
-msgid "L2gvpn tunnel"
-msgstr "L2gvpn tunnel"
-
-msgid "Limit download bandwidth"
-msgstr "Limit download bandwidth"
-
-msgid "Limit upload bandwidth"
-msgstr "Limit upload bandwidth"
-
-msgid "Mesh IP address"
-msgstr "Mesh IP address"
-
-msgid "Mesh IPv6 Address"
-msgstr "Mesh IPv6 Address"
-
-msgid "Netmask"
-msgstr "Netmask"
-
-msgid "Password"
-msgstr "Password"
-
-msgid "Password confirmation"
-msgstr "Password confirmation"
-
-msgid "Password successfully changed"
-msgstr "Password successfully changed"
-
-msgid "Protect LAN"
-msgstr "Protect LAN"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Select this checkbox to configure your network interfaces."
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Select this to allow others to use your connection to access the internet."
-
-msgid "Share your internet connection"
-msgstr "Share your internet connection"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "The ipv6 address is calculated automatically."
-
-msgid "The protocol to use for internet connectivity."
-msgstr "The protocol to use for internet connectivity."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr "This will setup a new virtual wireless interface in Access Point mode."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-
-msgid "Unknown Error"
-msgstr "Unknown Error"
-
-msgid "Username"
-msgstr "Username"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Virtual Access Point (VAP)"
-
-msgid "Wizard"
-msgstr "Wizard"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Your device and neighbouring nodes have to use the same channel."
-
-msgid "dhcp"
-msgstr "dhcp"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "static"
-msgstr "static"
-
-msgid "Configure this interface."
-msgstr "Configure this interface."
-
-msgid "recommended"
-msgstr "recommended"
-
-msgid "Basic settings"
-msgstr "Basic settings"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Basic settings are incomplete. Please go to"
-
-msgid "Error"
-msgstr "Error"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr "You can not use the wizard because some necessary values are missing."
-
-msgid "and fill out all required fields."
-msgstr "and fill out all required fields."
diff --git a/po/en/firewall.po b/po/en/firewall.po
deleted file mode 100644
index ecdbb08..0000000
--- a/po/en/firewall.po
+++ /dev/null
@@ -1,632 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr "Action"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr "Destination address"
-
-msgid "Destination port"
-msgstr "Destination port"
-
-msgid "Destination zone"
-msgstr "Destination zone"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr "Drop invalid packets"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr "Enable SYN-flood protection"
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr "External port"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/zones.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr "Forward"
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr "Input"
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr "Internal IP address"
-
-msgid "Internal port"
-msgstr "Internal port"
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr "MSS clamping"
-
-msgid "Masquerading"
-msgstr "Masquerading"
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr "Name"
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr "Output"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Redirect matched incoming traffic to the given port on the internal host"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Redirect matched incoming traffic to the specified internal host"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Traffic Redirection"
-# msgstr ""
-#
-# msgid ""
-# "Traffic redirection allows you to change the destination address of "
-# "forwarded packets."
-# msgstr ""
-#
-# msgid "Overview"
-# msgstr ""
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "Source zone"
-# msgstr ""
-#
-# msgid "Source MAC-address"
-# msgstr ""
-#
-# msgid "Source port"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-msgid "Source IP address"
-msgstr "Source IP address"
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr "Source address"
-
-msgid "Source port"
-msgstr "Source port"
-
-msgid "Source zone"
-msgstr "Source zone"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr "Zones"
-
-msgid "accept"
-msgstr "accept"
-
-msgid "any"
-msgstr "any"
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr "drop"
-
-msgid "reject"
-msgstr "reject"
-
-#~ msgid "Destination"
-#~ msgstr "Destination"
-
-#~ msgid "Source"
-#~ msgstr "Source"
-
-#~ msgid "(optional)"
-#~ msgstr "(optional)"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Internal port (optional)"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/trule.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "(optional)"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-# msgid "Source port"
-# msgstr ""
-#
-# msgid "Destination port"
-# msgstr ""
-#
-# msgid "Action"
-# msgstr ""
-#
-# msgid "drop"
-# msgstr ""
-#
-# msgid "accept"
-# msgstr ""
-#
-# msgid "reject"
-# msgstr ""
-#
-#~ msgid "Advanced Rules"
-#~ msgstr "Advanced Rules"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-
-#~ msgid "Device"
-#~ msgstr "Device"
-
-#~ msgid ""
-#~ "Match incoming traffic originating from the given source port or port "
-#~ "range on the client host"
-#~ msgstr ""
-#~ "Match incoming traffic originating from the given source port or port "
-#~ "range on the client host"
-
-#~ msgid "Overview"
-#~ msgstr "Overview"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/miniportfw.lua #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "(optional)"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-# msgid "External port"
-# msgstr ""
-#
-# msgid "Internal IP address"
-# msgstr ""
-#
-#~ msgid "Port forwarding"
-#~ msgstr "Port forwarding"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-
-#~ msgid "Rules"
-#~ msgstr "Rules"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/redirect.lua   #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-#~ msgid "Traffic Redirection"
-#~ msgstr "Traffic Redirection"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-
-#~ msgid "Network"
-#~ msgstr "Network"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/traffic.lua    #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-#~ msgid "Traffic Control"
-#~ msgstr "Traffic Control"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Zone-to-Zone traffic"
-
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-
-#~ msgid "Zone"
-#~ msgstr "Zone"
-
-#~ msgid "Destination IP"
-#~ msgstr "Destination IP"
-
-#~ msgid "IP address"
-#~ msgstr "IP address"
-
-#~ msgid "Source MAC-address"
-#~ msgstr "Source MAC-address"
diff --git a/po/en/freifunk-policyrouting.po b/po/en/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/en/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/en/freifunk.po b/po/en/freifunk.po
deleted file mode 100644
index 6532da1..0000000
--- a/po/en/freifunk.po
+++ /dev/null
@@ -1,394 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-30 06:42+0200\n"
-"PO-Revision-Date: 2009-07-06 23:21+0200\n"
-"Last-Translator: Jo-Philipp Wich <xm@subsignal.org>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr "Check for new firmware versions and perform automatic updates."
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr "Coordinates"
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr "E-Mail"
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr "Freifunk Remote Update"
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Hello and welcome in the network of"
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr "If you are interested in our project then contact the local community"
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-
-msgid "It is operated by"
-msgstr "It is operated by"
-
-msgid "Keep configuration"
-msgstr "Keep configuration"
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr "Location"
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memory"
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr "Nickname"
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr "Notice"
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr "Phone"
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr "Realname"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr "Start Upgrade"
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr "The installed firmware is the most recent version."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr "This is the access point"
-
-msgid "Update Settings"
-msgstr "Update Settings"
-
-msgid "Update available!"
-msgstr "Update available!"
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr "Verify downloaded images"
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-"You can find further information about the global Freifunk initiative at"
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/en/hd_idle.po b/po/en/hd_idle.po
deleted file mode 100644
index d3058a7..0000000
--- a/po/en/hd_idle.po
+++ /dev/null
@@ -1,48 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Disk"
-msgstr "Disk"
-
-msgid "Enable"
-msgstr "Enable"
-
-msgid "Enable debug"
-msgstr "Enable debug"
-
-msgid "Idle-time"
-msgstr "Idle-time"
-
-msgid "Idle-time unit"
-msgstr "Idle-time unit"
-
-msgid "Settings"
-msgstr "Settings"
-
-# Hours
-msgid "h"
-msgstr "h"
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
diff --git a/po/en/meshwizard.po b/po/en/meshwizard.po
deleted file mode 100644
index 180d771..0000000
--- a/po/en/meshwizard.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/en/minidlna.po b/po/en/minidlna.po
deleted file mode 100644
index 5934d42..0000000
--- a/po/en/minidlna.po
+++ /dev/null
@@ -1,195 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr "Album art names:"
-
-msgid "Announced model number:"
-msgstr "Announced model number:"
-
-msgid "Announced serial number:"
-msgstr "Announced serial number:"
-
-msgid "Browse directory"
-msgstr "Browse directory"
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr "Database directory:"
-
-msgid "Enable TIVO:"
-msgstr "Enable TIVO:"
-
-msgid "Enable inotify:"
-msgstr "Enable inotify:"
-
-msgid "Enable:"
-msgstr "Enable:"
-
-msgid "Friendly name:"
-msgstr "Friendly name:"
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr "Interfaces:"
-
-msgid "Log directory:"
-msgstr "Log directory:"
-
-msgid "Media directories:"
-msgstr "Media directories:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-
-msgid "Music"
-msgstr "Music"
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr "Notify interval in seconds."
-
-msgid "Notify interval:"
-msgstr "Notify interval:"
-
-msgid "Pictures"
-msgstr "Pictures"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-
-msgid "Port:"
-msgstr "Port:"
-
-msgid "Presentation URL:"
-msgstr "Presentation URL:"
-
-msgid "Root container:"
-msgstr "Root container:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-"Set this if you want to customize the name that shows up on your clients."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"Set this to enable inotify monitoring to automatically discover new files."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "Specify the path to the MiniSSDPd socket."
-
-msgid "Standard container"
-msgstr "Standard container"
-
-msgid "Strict to DLNA standard:"
-msgstr "Strict to DLNA standard:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr "Video"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr "miniSSDP socket:"
-
-#~ msgid "Network interfaces to serve, comma delimited list."
-#~ msgstr "Network interfaces to serve, comma delimited list."
-
-#~ msgid ""
-#~ "This is a list of file names to check for when searching for album art. "
-#~ "Note: names must be delimited with a forward slash '/'"
-#~ msgstr ""
-#~ "This is a list of file names to check for when searching for album art. "
-#~ "Note: names must be delimited with a forward slash '/'"
diff --git a/po/en/mmc_over_gpio.po b/po/en/mmc_over_gpio.po
deleted file mode 100644
index bd8f3c8..0000000
--- a/po/en/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-03-21 18:31+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "Settings"
diff --git a/po/en/multiwan.po b/po/en/multiwan.po
deleted file mode 100644
index 241e6d0..0000000
--- a/po/en/multiwan.po
+++ /dev/null
@@ -1,114 +0,0 @@
-#  multiwan.po
-#  generated from /tmp/i18n/luasrc/i18n/multiwan.en.lua
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Attempts Before WAN Failover"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Attempts Before WAN Recovery"
-
-msgid "Auto"
-msgstr "Auto"
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-
-msgid "DNS Server(s)"
-msgstr "DNS Server(s)"
-
-msgid "Default Route"
-msgstr "Default Route"
-
-msgid "Destination Address"
-msgstr "Destination Address"
-
-msgid "Disable"
-msgstr "Disable"
-
-msgid "Enable"
-msgstr "Enable"
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr "Failover Traffic Destination"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "Health Monitor ICMP Host(s)"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "Health Monitor ICMP Timeout"
-
-msgid "Health Monitor Interval"
-msgstr "Health Monitor Interval"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"Health Monitor detects and corrects network changes and failed connections."
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr "Load Balancer Distribution"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Load Balancer(Compatibility)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Load Balancer(Performance)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Multi-WAN Traffic Rules"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-
-msgid "None"
-msgstr "None"
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr "Ports"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr "Source Address"
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr "WAN Interfaces"
-
-msgid "WAN Uplink"
-msgstr "WAN Uplink"
-
-msgid "all"
-msgstr ""
diff --git a/po/en/ntpc.po b/po/en/ntpc.po
deleted file mode 100644
index 803a996..0000000
--- a/po/en/ntpc.po
+++ /dev/null
@@ -1,51 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Clock Adjustment"
-msgstr "Clock Adjustment"
-
-msgid "Count of time measurements"
-msgstr "Count of time measurements"
-
-msgid "Current system time"
-msgstr "Current system time"
-
-msgid "General"
-msgstr "General"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Offset frequency"
-msgstr "Offset frequency"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "Synchronizes the system time"
-
-msgid "Time Server"
-msgstr ""
-
-msgid "Time Servers"
-msgstr "Time Servers"
-
-msgid "Time Synchronisation"
-msgstr "Time Synchronisation"
-
-msgid "Update interval (in seconds)"
-msgstr "Update interval (in seconds)"
-
-msgid "empty = infinite"
-msgstr "empty = infinite"
diff --git a/po/en/olsr.po b/po/en/olsr.po
deleted file mode 100644
index b634214..0000000
--- a/po/en/olsr.po
+++ /dev/null
@@ -1,583 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Active MID announcements"
-msgstr "Active MID announcements"
-
-msgid "Active OLSR nodes"
-msgstr "Active OLSR nodes"
-
-msgid "Active host net announcements"
-msgstr "Active host net announcements"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr "Announced network"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr "Expected retransmission count"
-
-msgid "FIB metric"
-msgstr "FIB metric"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr "General settings"
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr "HNA interval"
-
-msgid "HNA validity time"
-msgstr "HNA validity time"
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr "Hello interval"
-
-msgid "Hello validity time"
-msgstr "Hello validity time"
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr "IPv4 broadcast"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr "Internet protocol"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr "Known OLSR routes"
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr "LQ aging"
-
-msgid "LQ algorithm"
-msgstr "LQ algorithm"
-
-msgid "LQ fisheye"
-msgstr "LQ fisheye"
-
-msgid "LQ level"
-msgstr "LQ level"
-
-msgid "Last hop"
-msgstr "Last hop"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr "Library"
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr "Local interface IP"
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr "MID interval"
-
-msgid "MID validity time"
-msgstr "MID validity time"
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr "Neighbour IP"
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr "Netmask"
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr "OLSR - HNA-Announcements"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - Plugins"
-
-msgid "OLSR Daemon"
-msgstr "OLSR Daemon"
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr "OLSR connections"
-
-msgid "OLSR gateway"
-msgstr "OLSR gateway"
-
-msgid "OLSR node"
-msgstr "OLSR node"
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Overview of currently active OLSR host net announcements"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Overview of currently established OLSR connections"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Overview of currently known OLSR nodes"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Overview of currently known routes to other OLSR nodes"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Overview of known multiple interface announcements"
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr "Plugin configuration"
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr "Pollrate"
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr "Prefix"
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr "Secondary OLSR interfaces"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr "TC interval"
-
-msgid "TC validity time"
-msgstr "TC validity time"
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "Unable to connect to the OLSR daemon!"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr "Use hysteresis"
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr "Willingness"
diff --git a/po/en/openvpn.po b/po/en/openvpn.po
deleted file mode 100644
index 710d723..0000000
--- a/po/en/openvpn.po
+++ /dev/null
@@ -1,552 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: 2012-04-03 08:45+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', or 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Accept options pushed from server"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr "Add route after establishing connection"
-
-msgid "Additional authentication over TLS"
-msgstr "Additional authentication over TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Allow client-to-client traffic"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Allow multiple clients with same certificate"
-
-msgid "Allow only one session"
-msgstr "Allow only one session"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Allow remote to change its IP or port"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Allowed maximum of connected clients"
-
-msgid "Allowed maximum of internal"
-msgstr "Allowed maximum of internal"
-
-msgid "Allowed maximum of new connections"
-msgstr "Allowed maximum of new connections"
-
-msgid "Append log to file"
-msgstr "Append log to file"
-
-msgid "Authenticate using username/password"
-msgstr "Authenticate using username/password"
-
-msgid "Automatically redirect default route"
-msgstr "Automatically redirect default route"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Below is a list of configured OpenVPN instances and their current state"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "Call down cmd/script before TUN/TAP close"
-
-msgid "Certificate authority"
-msgstr "Certificate authority"
-
-msgid "Change process priority"
-msgstr "Change process priority"
-
-msgid "Change to directory before initialization"
-msgstr "Change to directory before initialization"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Check peer certificate against a CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Chroot to directory after initialization"
-
-msgid "Client is disabled"
-msgstr "Client is disabled"
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr "Configure client mode"
-
-msgid "Configure server bridge"
-msgstr "Configure server bridge"
-
-msgid "Configure server mode"
-msgstr "Configure server mode"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Connect through Socks5 proxy"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr "Connection retry interval"
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr "Daemonize after initialization"
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "Delay tun/tap open and up script execution"
-
-msgid "Diffie Hellman parameters"
-msgstr "Diffie Hellman parameters"
-
-msgid "Directory for custom client config files"
-msgstr "Directory for custom client config files"
-
-msgid "Disable Paging"
-msgstr "Disable Paging"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Disable cipher initialisation vector"
-
-msgid "Disable options consistency check"
-msgstr "Disable options consistency check"
-
-msgid "Disable replay protection"
-msgstr "Disable replay protection"
-
-msgid "Do not bind to local address and port"
-msgstr "Do not bind to local address and port"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Don't actually execute ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "Don't add routes automatically"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "Don't cache --askpass or --auth-user-pass passwords"
-
-msgid "Don't inherit global push options"
-msgstr "Don't inherit global push options"
-
-msgid "Don't log timestamps"
-msgstr "Don't log timestamps"
-
-msgid "Don't re-read key on restart"
-msgstr "Don't re-read key on restart"
-
-msgid "Don't require client certificate"
-msgstr "Don't require client certificate"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Don't use adaptive lzo compression"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "Don't warn on ifconfig inconsistencies"
-
-msgid "Echo parameters to log"
-msgstr "Echo parameters to log"
-
-msgid "Empirically measure MTU"
-msgstr "Empirically measure MTU"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Enable OpenSSL hardware crypto engines"
-
-msgid "Enable Path MTU discovery"
-msgstr "Enable Path MTU discovery"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Enable Static Key encryption mode (non-TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Enable TLS and assume client role"
-
-msgid "Enable TLS and assume server role"
-msgstr "Enable TLS and assume server role"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Enable internal datagram fragmentation"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Enable management interface on <em>IP</em> <em>port</em>"
-
-msgid "Enabled"
-msgstr "Enabled"
-
-msgid "Encryption cipher for packets"
-msgstr "Encryption cipher for packets"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Execute shell cmd after routes are added"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Execute shell command on remote ip change"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Exit on TLS negotiation failure"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Get PEM password from controlling tty before we daemonize"
-
-msgid "HMAC authentication for packets"
-msgstr "HMAC authentication for packets"
-
-msgid "Handling of authentication failures"
-msgstr "Handling of authentication failures"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr "If hostname resolve fails, retry"
-
-msgid "Instance \"%s\""
-msgstr "Instance \"%s\""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr "Keep local IP address on restart"
-
-msgid "Keep remote IP address on restart"
-msgstr "Keep remote IP address on restart"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Keep tun/tap device open on restart"
-
-msgid "Key transition window"
-msgstr "Key transition window"
-
-msgid "Limit repeated log messages"
-msgstr "Limit repeated log messages"
-
-msgid "Local certificate"
-msgstr "Local certificate"
-
-msgid "Local host name or ip address"
-msgstr "Local host name or ip address"
-
-msgid "Local private key"
-msgstr "Local private key"
-
-msgid "Major mode"
-msgstr "Major mode"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Make tun device IPv6 capable"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Maximum number of queued TCP output packets"
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Number of allocated broadcast buffers"
-
-msgid "Number of lines for log file history"
-msgstr "Number of lines for log file history"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Only accept connections from given X509 name"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "Only process ping timeouts if routes exist"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "OpenVPN instances"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Optimize TUN/TAP/UDP writes"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Output to syslog and do not daemonize"
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr "PKCS#12 file containing keys"
-
-msgid "Pass environment variables to script"
-msgstr "Pass environment variables to script"
-
-msgid "Persist replay-protection state"
-msgstr "Persist replay-protection state"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Persist/unpersist ifconfig-pool"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Ping remote every n seconds over TCP/UDP port"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Proxy timeout in seconds"
-msgstr "Proxy timeout in seconds"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Push an ifconfig option to remote"
-
-msgid "Push options to peer"
-msgstr "Push options to peer"
-
-msgid "Query management channel for private key"
-msgstr "Query management channel for private key"
-
-msgid "Randomly choose remote server"
-msgstr "Randomly choose remote server"
-
-msgid "Refuse connection if no custom client config"
-msgstr "Refuse connection if no custom client config"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Remap SIGUSR1 signals"
-
-msgid "Remote host name or ip address"
-msgstr "Remote host name or ip address"
-
-msgid "Remote ping timeout"
-msgstr "Remote ping timeout"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Renegotiate data chan. key after bytes"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Renegotiate data chan. key after packets"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "Renegotiate data chan. key after seconds"
-
-msgid "Replay protection sliding window size"
-msgstr "Replay protection sliding window size"
-
-msgid "Require explicit designation on certificate"
-msgstr "Require explicit designation on certificate"
-
-msgid "Require explicit key usage on certificate"
-msgstr "Require explicit key usage on certificate"
-
-msgid "Restart after remote ping timeout"
-msgstr "Restart after remote ping timeout"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Retransmit timeout on TLS control channel"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Retry indefinitely on HTTP proxy errors"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Retry indefinitely on Socks proxy errors"
-
-msgid "Route subnet to client"
-msgstr "Route subnet to client"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Run as an inetd or xinetd server"
-
-msgid "Run script cmd on client connection"
-msgstr "Run script cmd on client connection"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Run script cmd on client disconnection"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Run up/down scripts for all restarts"
-
-msgid "Send notification to peer on disconnect"
-msgstr "Send notification to peer on disconnect"
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr "Set GID to group"
-
-msgid "Set TCP/UDP MTU"
-msgstr "Set TCP/UDP MTU"
-
-msgid "Set UID to user"
-msgstr "Set UID to user"
-
-msgid "Set aside a pool of subnets"
-msgstr "Set aside a pool of subnets"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Set extended HTTP proxy options"
-
-msgid "Set output verbosity"
-msgstr "Set output verbosity"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr "Set size of real and virtual address hash tables"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Set the TCP/UDP receive buffer size"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Set the TCP/UDP send buffer size"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Set tun/tap TX queue length"
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr "Set tun/tap device MTU"
-
-msgid "Set tun/tap device overhead"
-msgstr "Set tun/tap device overhead"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Set upper bound on TCP MSS"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Shaping for peer bandwidth"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Shell cmd to execute after tun device open"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Shell cmd to run after tun device close"
-
-msgid "Shell command to verify X509 name"
-msgstr "Shell command to verify X509 name"
-
-msgid "Silence the output of replay warnings"
-msgstr "Silence the output of replay warnings"
-
-msgid "Size of cipher key"
-msgstr "Size of cipher key"
-
-msgid "Specify a default gateway for routes"
-msgstr "Specify a default gateway for routes"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Start OpenVPN in a hibernating state"
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr "Started"
-
-msgid "Status file format version"
-msgstr "Status file format version"
-
-msgid "Switch to advanced configuration »"
-msgstr "Switch to advanced configuration »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "TCP/UDP port # for both local and remote"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "TCP/UDP port # for local (default=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "TCP/UDP port # for remote (default=1194)"
-
-msgid "TLS cipher"
-msgstr "TLS cipher"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "TOS passthrough (applies to IPv4 only)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Temporary directory for client-connect return file"
-
-msgid "Timeframe for key exchange"
-msgstr "Timeframe for key exchange"
-
-msgid "Type of used device"
-msgstr "Type of used device"
-
-msgid "Use fast LZO compression"
-msgstr "Use fast LZO compression"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Use individual addresses rather than /30 subnets"
-
-msgid "Use protocol"
-msgstr "Use protocol"
-
-msgid "Use tun/tap device node"
-msgstr "Use tun/tap device node"
-
-msgid "Use username as common name"
-msgstr "Use username as common name"
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr "Write log to file"
-
-msgid "Write process ID to file"
-msgstr "Write process ID to file"
-
-msgid "Write status to file every n seconds"
-msgstr "Write status to file every n seconds"
-
-msgid "no"
-msgstr "no"
-
-msgid "tun/tap device"
-msgstr "tun/tap device"
-
-msgid "tun/tap inactivity timeout"
-msgstr "tun/tap inactivity timeout"
-
-msgid "yes (%i)"
-msgstr "yes (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Switch to basic configuration"
diff --git a/po/en/p2pblock.po b/po/en/p2pblock.po
deleted file mode 100644
index 00cccc8..0000000
--- a/po/en/p2pblock.po
+++ /dev/null
@@ -1,28 +0,0 @@
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/en/p910nd.po b/po/en/p910nd.po
deleted file mode 100644
index 797b14d..0000000
--- a/po/en/p910nd.po
+++ /dev/null
@@ -1,45 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Bidirectional mode"
-msgstr "Bidirectional mode"
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Printer server"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr "p910nd listens on port 910+N. E.g. 9100 for the first printer."
diff --git a/po/en/pbx-voicemail.po b/po/en/pbx-voicemail.po
deleted file mode 100644
index 79c8848..0000000
--- a/po/en/pbx-voicemail.po
+++ /dev/null
@@ -1,169 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr "Email Addresses that Receive Voicemail"
-
-msgid "Enable Voicemail"
-msgstr "Enable Voicemail"
-
-msgid "Global Voicemail Setup"
-msgstr "Global Voicemail Setup"
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-
-msgid "Last Sent Voicemail Log"
-msgstr "Last Sent Voicemail Log"
-
-msgid "Local Storage Directory"
-msgstr "Local Storage Directory"
-
-msgid "No"
-msgstr "No"
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr "Outgoing mail (SMTP) Server"
-
-msgid "SMTP Password"
-msgstr "SMTP Password"
-
-msgid "SMTP Port Number"
-msgstr "SMTP Port Number"
-
-msgid "SMTP Server Authentication"
-msgstr "SMTP Server Authentication"
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr "SMTP Server Hostname or IP Address"
-
-msgid "SMTP User Name"
-msgstr "SMTP User Name"
-
-msgid "Secure Connection Using TLS"
-msgstr "Secure Connection Using TLS"
-
-msgid "Voicemail Setup"
-msgstr "Voicemail Setup"
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-
-msgid "Yes"
-msgstr "Yes"
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-
-#~ msgid "Directory to save voicemail into"
-#~ msgstr "Directory to save voicemail into"
-
-#~ msgid "Email addresses to forward to"
-#~ msgstr "Email addresses to forward to"
-
-#~ msgid "Enabled"
-#~ msgstr "Enabled"
-
-#~ msgid ""
-#~ "Here you can configure a global voicemail for this PBX. Since this system "
-#~ "is intended to run on embedded systems like routers, there is no local "
-#~ "storage of voicemail - it must be sent out by email. Therefore you need "
-#~ "to configure an outgoing mail (SMTP) server (for example the SMTP server "
-#~ "your ISP provides, or GMail), and provide a list of addresses the "
-#~ "voicemail will be sent to."
-#~ msgstr ""
-#~ "Here you can configure a global voicemail for this PBX. Since this system "
-#~ "is intended to run on embedded systems like routers, there is no local "
-#~ "storage of voicemail - it must be sent out by email. Therefore you need "
-#~ "to configure an outgoing mail (SMTP) server (for example the SMTP server "
-#~ "your ISP provides, or GMail), and provide a list of addresses the "
-#~ "voicemail will be sent to."
-
-#~ msgid ""
-#~ "In order for this PBX to send emails containing voicemail recordings, you "
-#~ "need to set up an SMTP server here. Your ISP usually provides an SMTP "
-#~ "server for that purpose. You can also set up a GMail, Yahoo, or other 3rd "
-#~ "party SMTP server."
-#~ msgstr ""
-#~ "In order for this PBX to send emails containing voicemail recordings, you "
-#~ "need to set up an SMTP server here. Your ISP usually provides an SMTP "
-#~ "server for that purpose. You can also set up a GMail, Yahoo, or other 3rd "
-#~ "party SMTP server."
-
-#~ msgid "SMTP port number"
-#~ msgstr "SMTP port number"
-
-#~ msgid "SMTP server authentication"
-#~ msgstr "SMTP server authentication"
-
-#~ msgid "SMTP server hostname or IP"
-#~ msgstr "SMTP server hostname or IP"
-
-#~ msgid "SMTP user name"
-#~ msgstr "SMTP user name"
-
-#~ msgid "Timeout before sending callers to voicemail"
-#~ msgstr "Timeout before sending callers to voicemail"
-
-#~ msgid "Use TLS (secure connection)"
-#~ msgstr "Use TLS (secure connection)"
-
-#~ msgid ""
-#~ "When you enable voicemail, you will have the opportunity to specify email "
-#~ "addresses which receive the message. You must also set up an SMTP server "
-#~ "below."
-#~ msgstr ""
-#~ "When you enable voicemail, you will have the opportunity to specify email "
-#~ "addresses which receive the message. You must also set up an SMTP server "
-#~ "below."
diff --git a/po/en/pbx.po b/po/en/pbx.po
deleted file mode 100644
index b467a4d..0000000
--- a/po/en/pbx.po
+++ /dev/null
@@ -1,467 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr "Advanced Settings"
-
-msgid "Available"
-msgstr "Available"
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-
-msgid "Away"
-msgstr "Away"
-
-msgid "Blacklisted Numbers"
-msgstr "Blacklisted Numbers"
-
-msgid "Call Routing"
-msgstr "Call Routing"
-
-msgid "Call-through Numbers"
-msgstr "Call-through Numbers"
-
-msgid "Copy-paste large lists of numbers here."
-msgstr "Copy-paste large lists of numbers here."
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr "Do Not Disturb"
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr "Dynamic List of Blacklisted Numbers"
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr "Enable Incoming Calls (Register via SIP)"
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr "Enable Outgoing Calls"
-
-msgid "Enabled"
-msgstr "Enabled"
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr "External SIP Port"
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr "Full Name"
-
-msgid "General Settings"
-msgstr "General Settings"
-
-msgid "Google Accounts"
-msgstr "Google Accounts"
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr "Google Voice/Talk Accounts"
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr "Incoming Calls"
-
-msgid "Insert QoS Rules"
-msgstr "Insert QoS Rules"
-
-msgid "Makes Outgoing Calls"
-msgstr "Makes Outgoing Calls"
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr "No"
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr "Outbound Proxy"
-
-msgid "Outgoing Calls"
-msgstr "Outgoing Calls"
-
-msgid "PBX Main Page"
-msgstr "PBX Main Page"
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "Password"
-msgstr "Password"
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr "Port Setting for SIP Devices"
-
-msgid "Providers Used for Outgoing Calls"
-msgstr "Providers Used for Outgoing Calls"
-
-msgid "QoS Settings"
-msgstr "QoS Settings"
-
-msgid "RTP Port Range End"
-msgstr "RTP Port Range End"
-
-msgid "RTP Port Range Start"
-msgstr "RTP Port Range Start"
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr "Receives Incoming Calls"
-
-msgid "Remote Usage"
-msgstr "Remote Usage"
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr "SIP Accounts"
-
-msgid "SIP Device/Softphone Accounts"
-msgstr "SIP Device/Softphone Accounts"
-
-msgid "SIP Provider Accounts"
-msgstr "SIP Provider Accounts"
-
-msgid "SIP Realm (needed by some providers)"
-msgstr "SIP Realm (needed by some providers)"
-
-msgid "SIP Server/Registrar"
-msgstr "SIP Server/Registrar"
-
-msgid "SIP Server/Registrar Port"
-msgstr "SIP Server/Registrar Port"
-
-msgid "Server Setting"
-msgstr "Server Setting"
-
-msgid "Server Setting for Local SIP Devices"
-msgstr "Server Setting for Local SIP Devices"
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr "Server Setting for Remote SIP Devices"
-
-msgid "Service Status"
-msgstr "Service Status"
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr "Space-Separated List of Blacklisted Numbers"
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr "Specify numbers individually here. Press enter to add more numbers."
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-
-msgid "Use this account to make outgoing calls."
-msgstr "Use this account to make outgoing calls."
-
-msgid "User Accounts"
-msgstr "User Accounts"
-
-msgid "User Agent String"
-msgstr "User Agent String"
-
-msgid "User Name"
-msgstr "User Name"
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr "Yes"
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr "You can specify a real name to show up in the Caller ID here."
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-#~ msgid "Account Status"
-#~ msgstr "Account Status"
-
-#~ msgid "Account Status Message"
-#~ msgstr "Account Status Message"
-
-#~ msgid "Domain Name/Dynamic Domain Name"
-#~ msgstr "Domain Name/Dynamic Domain Name"
-
-#~ msgid "Enable Incoming Calls (See Status, Message below)"
-#~ msgstr "Enable Incoming Calls (See Status, Message below)"
-
-#~ msgid "Service Control and Connection Status"
-#~ msgstr "Service Control and Connection Status"
diff --git a/po/en/polipo.po b/po/en/polipo.po
deleted file mode 100644
index 1bdb0c1..0000000
--- a/po/en/polipo.po
+++ /dev/null
@@ -1,284 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr "Allowed clients"
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr "DNS server address"
-
-msgid "Delete cache files time"
-msgstr "Delete cache files time"
-
-msgid "Disk cache location"
-msgstr "Disk cache location"
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Enable if cache (proxy) is shared by multiple users."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "First PMM segment size (in bytes)"
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "How much RAM should Polipo use for its cache."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "In RAM cache size (in bytes)"
-
-msgid "Listen address"
-msgstr "Listen address"
-
-msgid "Listen port"
-msgstr "Listen port"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-
-msgid "Log file location"
-msgstr "Log file location"
-
-msgid "Log to syslog"
-msgstr "Log to syslog"
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr "On-Disk Cache"
-
-msgid "PMM segments size (in bytes)"
-msgstr "PMM segments size (in bytes)"
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr "Parent proxy address"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-
-msgid "Parent proxy authentication"
-msgstr "Parent proxy authentication"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipo is a small and fast caching web proxy."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Poor Man&#39;s Multiplexing"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"Poor Man&#39;s Multiplexing (PMM) is a technique that simulates multiplexing "
-"by requesting an instance in multiple segments. It tries to lower the "
-"latency caused by the weakness of HTTP protocol. NOTE: some sites may not "
-"work with PMM enabled."
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr "Query DNS by hostname"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr "Query DNS for IPv6"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-
-msgid "Shared cache"
-msgstr "Shared cache"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr "Syslog facility"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr "To enable PMM, PMM segment size must be set to some positive value."
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Truncate cache files size (in bytes)"
-
-msgid "Truncate cache files time"
-msgstr "Truncate cache files time"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid ""
-#~ "To enable polipo on-disk cache cleaning (highly recommended), you should "
-#~ "add a cron job in Scheduled Tasks services that will execute /usr/sbin/"
-#~ "polipo_purge script. For example to perform disk cache cleanup every day "
-#~ "at 6:00 in the morning you should add the following line in Scheduled "
-#~ "Tasks \"0 6 * * *\\t/usr/sbin/polipo_purge\" (without quotes)."
-#~ msgstr ""
-#~ "To enable polipo on-disk cache cleaning (highly recommended), you should "
-#~ "add a cron job in Scheduled Tasks services that will execute /usr/sbin/"
-#~ "polipo_purge script. For example to perform disk cache cleanup every day "
-#~ "at 6:00 in the morning you should add the following line in Scheduled "
-#~ "Tasks \"0 6 * * *\t/usr/sbin/polipo_purge\" (without quotes)."
-
-#~ msgid ""
-#~ "Size to which cached files should be truncated. (default value: 1048576)"
-#~ msgstr ""
-#~ "Size to which cached files should be truncated. (default value: 1048576)"
-
-#~ msgid ""
-#~ "Time after which cached files will be truncated. (default value: 4d12h)"
-#~ msgstr ""
-#~ "Time after which cached files will be truncated. (default value: 4d12h)"
-
-#~ msgid "Time after which cached files will be deleted. (default value: 32d)"
-#~ msgstr "Time after which cached files will be deleted. (default value: 32d)"
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-#~ "that are allowed to connect. The format is IP address or network address "
-#~ "(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-#~ msgstr ""
-#~ "When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-#~ "that are allowed to connect. The format is IP address or network address "
-#~ "(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-
-#~ msgid ""
-#~ "false = Do not query IPv6; reluctantly = Query both, prefer IPv4; happily "
-#~ "= Query both, prefer IPv6; true = Query only IPv6"
-#~ msgstr ""
-#~ "false = Do not query IPv6; reluctantly = Query both, prefer IPv4; happily "
-#~ "= Query both, prefer IPv6; true = Query only IPv6"
-
-#~ msgid ""
-#~ "false = Never use system DNS resolver; reluctantly = Query DNS directly, "
-#~ "if DNS server is unavailable fail to system DNS resolver; happily = Query "
-#~ "DNS directly, if host could not be found fallback to system DNS resolver; "
-#~ "true = Always use system DNS resolver"
-#~ msgstr ""
-#~ "false = Never use system DNS resolver; reluctantly = Query DNS directly, "
-#~ "if DNS server is unavailable fail to system DNS resolver; happily = Query "
-#~ "DNS directly, if host could not be found fallback to system DNS resolver; "
-#~ "true = Always use system DNS resolver"
-
-#~ msgid "Port on which Polipo will listen. (default value: 8123)"
-#~ msgstr "Port on which Polipo will listen. (default value: 8123)"
diff --git a/po/en/qos.po b/po/en/qos.po
deleted file mode 100644
index ce26fd5..0000000
--- a/po/en/qos.po
+++ /dev/null
@@ -1,103 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2010-03-25 22:10+0100\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Calculate overhead"
-msgstr "Calculate overhead"
-
-msgid "Classification Rules"
-msgstr "Classification Rules"
-
-msgid "Classification group"
-msgstr "Classification group"
-
-msgid "Destination host"
-msgstr "Destination host"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr "Download speed (kbit/s)"
-
-msgid "Enable"
-msgstr "Enable"
-
-msgid "Half-duplex"
-msgstr "Half-duplex"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr "Number of bytes"
-
-msgid "Ports"
-msgstr "Ports"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr "Quality of Service"
-
-msgid "Service"
-msgstr "Service"
-
-msgid "Source host"
-msgstr "Source host"
-
-msgid "Target"
-msgstr "Target"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr "Upload speed (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-
-msgid "all"
-msgstr "all"
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr "default"
-
-msgid "express"
-msgstr "express"
-
-msgid "low"
-msgstr "low"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "priority"
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/en/radvd.po b/po/en/radvd.po
deleted file mode 100644
index 8e0fb01..0000000
--- a/po/en/radvd.po
+++ /dev/null
@@ -1,368 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-21 04:06+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/en/rrdtool.po b/po/en/rrdtool.po
deleted file mode 100644
index d780144..0000000
--- a/po/en/rrdtool.po
+++ /dev/null
@@ -1,358 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Wireless - Signal Noise Ratio"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Noise Level"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Signal Strength"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Wireless - Signal Quality"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Signal Quality"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: ICMP Roundtrip Times"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Firewall - Processed Packets"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "Packets/s"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Chain \"%di\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - Transfer on %pi"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "Bytes/s"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Bytes (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - Packets on %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "Packets/s"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Processed (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Dropped   (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Errors    (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - Multicast on %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "Packets/s"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Packets"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - Collisions on %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "Collisions/s"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Collisions"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - Errors on %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "Errors/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Processes"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Processes/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Process %pi - used cpu time"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffies"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "system"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "user"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Process %pi - threads and processes"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "Count"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Process %pi - page faults"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Pagefaults"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "page faults"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Process %pi - virtual memory size"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bytes"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "virtual memory"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Usage on Processor #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Transfer on %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "Bytes/s"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Packets on %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "Packets/s"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: TCP-Connections to Port %pi"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "Connections/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Disk Space Usage on %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Bytes"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: Interrupts"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "Issues/s"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: System Load"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Load"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 min"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 min"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 min"
diff --git a/po/en/samba.po b/po/en/samba.po
deleted file mode 100644
index f524c14..0000000
--- a/po/en/samba.po
+++ /dev/null
@@ -1,82 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-22 15:23+0100\n"
-"PO-Revision-Date: 2011-10-25 21:26+0200\n"
-"Last-Translator: awm1 <awm1klimes8vladimir@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: en\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Allow guests"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr "Allow system users to reach their home directories via network shares"
-
-msgid "Allowed users"
-msgstr "Allowed users"
-
-msgid "Create mask"
-msgstr "Create mask"
-
-msgid "Description"
-msgstr "Description"
-
-msgid "Directory mask"
-msgstr "Directory mask"
-
-msgid "Edit Template"
-msgstr "Edit template"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Edit the template that is used for generating the Samba configuration."
-
-msgid "General Settings"
-msgstr "General settings"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Mask for new directories"
-msgstr "Mask for new directories"
-
-msgid "Mask for new files"
-msgstr "Mask for new files"
-
-msgid "Name"
-msgstr "Name"
-
-msgid "Network Shares"
-msgstr "Network Shares"
-
-msgid "Path"
-msgstr "Path"
-
-msgid "Read-only"
-msgstr "Read-only"
-
-msgid "Share home-directories"
-msgstr "Share home-directories"
-
-msgid "Shared Directories"
-msgstr "Shared Directories"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your Samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"settings' tab."
-
-msgid "Workgroup"
-msgstr "Workgroup"
diff --git a/po/en/splash.po b/po/en/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/en/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/en/statistics.po b/po/en/statistics.po
deleted file mode 100644
index 5de0764..0000000
--- a/po/en/statistics.po
+++ /dev/null
@@ -1,661 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Action (target)"
-msgstr "Action (target)"
-
-msgid "Add command for reading values"
-msgstr "Add command for reading values"
-
-msgid "Add matching rule"
-msgstr "Add matching rule"
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr "Add notification command"
-
-msgid "Base Directory"
-msgstr "Base Directory"
-
-msgid "Basic monitoring"
-msgstr "Basic monitoring"
-
-msgid "CPU Plugin Configuration"
-msgstr "CPU Plugin Configuration"
-
-msgid "CSV Output"
-msgstr "CSV Output"
-
-msgid "CSV Plugin Configuration"
-msgstr "CSV Plugin Configuration"
-
-msgid "Cache collected data for"
-msgstr "Cache collected data for"
-
-msgid "Cache flush interval"
-msgstr "Cache flush interval"
-
-msgid "Chain"
-msgstr "Chain"
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Collectd Settings"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr "DF Plugin Configuration"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "DNS Plugin Configuration"
-
-msgid "Data collection interval"
-msgstr "Data collection interval"
-
-msgid "Datasets definition file"
-msgstr "Datasets definition file"
-
-msgid "Destination ip range"
-msgstr "Destination ip range"
-
-msgid "Directory for collectd plugins"
-msgstr "Directory for collectd plugins"
-
-msgid "Directory for sub-configurations"
-msgstr "Directory for sub-configurations"
-
-msgid "Disk Plugin Configuration"
-msgstr "Disk Plugin Configuration"
-
-msgid "Disk Space Usage"
-msgstr "Disk Space Usage"
-
-msgid "Disk Usage"
-msgstr "Disk Usage"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Display timespan »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "E-Mail Plugin Configuration"
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable this plugin"
-msgstr "Enable this plugin"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Exec Plugin Configuration"
-
-msgid "Filter class monitoring"
-msgstr "Filter class monitoring"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr "Flush cache after"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "Forwarding between listen and server addresses"
-
-msgid "Graphs"
-msgstr "Graphs"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr "IRQ Plugin Configuration"
-
-msgid "Ignore source addresses"
-msgstr "Ignore source addresses"
-
-msgid "Incoming interface"
-msgstr "Incoming interface"
-
-msgid "Interface Plugin Configuration"
-msgstr "Interface Plugin Configuration"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interrupts"
-msgstr "Interrupts"
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr "Iptables Plugin Configuration"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr "Listen host"
-
-msgid "Listen port"
-msgstr "Listen port"
-
-msgid "Listener interfaces"
-msgstr "Listener interfaces"
-
-msgid "Load Plugin Configuration"
-msgstr "Load Plugin Configuration"
-
-msgid "Maximum allowed connections"
-msgstr "Maximum allowed connections"
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr "Monitor all local listen ports"
-
-msgid "Monitor devices"
-msgstr "Monitor devices"
-
-msgid "Monitor disks and partitions"
-msgstr "Monitor disks and partitions"
-
-msgid "Monitor filesystem types"
-msgstr "Monitor filesystem types"
-
-msgid "Monitor hosts"
-msgstr "Monitor hosts"
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr "Monitor interrupts"
-
-msgid "Monitor local ports"
-msgstr "Monitor local ports"
-
-msgid "Monitor mount points"
-msgstr "Monitor mount points"
-
-msgid "Monitor processes"
-msgstr "Monitor processes"
-
-msgid "Monitor remote ports"
-msgstr "Monitor remote ports"
-
-msgid "Name of the rule"
-msgstr "Name of the rule"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Netlink Plugin Configuration"
-
-msgid "Network"
-msgstr "Network"
-
-msgid "Network Plugin Configuration"
-msgstr "Network Plugin Configuration"
-
-msgid "Network plugins"
-msgstr "Network plugins"
-
-msgid "Network protocol"
-msgstr "Network protocol"
-
-msgid "Number of threads for data collection"
-msgstr "Number of threads for data collection"
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr "Only create average RRAs"
-
-msgid "Options"
-msgstr "Options"
-
-msgid "Outgoing interface"
-msgstr "Outgoing interface"
-
-msgid "Output plugins"
-msgstr "Output plugins"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Ping Plugin Configuration"
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Processes"
-
-msgid "Processes Plugin Configuration"
-msgstr "Processes Plugin Configuration"
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Processor"
-
-msgid "Qdisc monitoring"
-msgstr "Qdisc monitoring"
-
-msgid "RRD XFiles Factor"
-msgstr "RRD XFiles Factor"
-
-msgid "RRD heart beat interval"
-msgstr "RRD heart beat interval"
-
-msgid "RRD step interval"
-msgstr "RRD step interval"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "RRDTool Plugin Configuration"
-
-msgid "Rows per RRA"
-msgstr "Rows per RRA"
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Seconds"
-
-msgid "Server host"
-msgstr "Server host"
-
-msgid "Server port"
-msgstr "Server port"
-
-msgid "Shaping class monitoring"
-msgstr "Shaping class monitoring"
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr "Source ip range"
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr "Storage directory"
-
-msgid "Storage directory for the csv files"
-msgstr "Storage directory for the csv files"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Store data values as rates instead of absolute values"
-
-msgid "Stored timespans"
-msgstr "Stored timespans"
-
-msgid "System Load"
-msgstr "System Load"
-
-msgid "System plugins"
-msgstr "System plugins"
-
-msgid "TCP Connections"
-msgstr "TCP Connections"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "TCPConns Plugin Configuration"
-
-msgid "TTL for network packets"
-msgstr "TTL for network packets"
-
-msgid "TTL for ping packets"
-msgstr "TTL for ping packets"
-
-msgid "Table"
-msgstr "Table"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr "The cpu plugin collects basic statistics about the processor usage."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"The interface plugin collects traffic statistics on selected interfaces."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "The load plugin collects statistics about the general system load."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"This section defines to which servers the locally collected data is sent to."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Try to lookup fully qualified hostname"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Unixsock Plugin Configuration"
-
-msgid "Used PID file"
-msgstr "Used PID file"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr "Verbose monitoring"
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr "e.g. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "e.g. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "e.g. reject-with tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "max. 16 chars"
-
-msgid "reduces rrd size"
-msgstr "reduces rrd size"
-
-msgid "seconds; multiple separated by space"
-msgstr "seconds; multiple separated by space"
-
-msgid "server interfaces"
-msgstr "server interfaces"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Wireless Plugin Configuration"
diff --git a/po/en/tinyproxy.po b/po/en/tinyproxy.po
deleted file mode 100644
index 4650f3e..0000000
--- a/po/en/tinyproxy.po
+++ /dev/null
@@ -1,331 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr "Log level"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr "Max. spare servers"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr "Min. spare servers"
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr "Reject access"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr "Target host"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr "Via proxy"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
-
-#~ msgid "Allow access from"
-#~ msgstr "Allow access from"
-
-#~ msgid "Allowed headers for anonymous proxy"
-#~ msgstr "Allowed headers for anonymous proxy"
-
-#~ msgid "Bind outgoing traffic to address"
-#~ msgstr "Bind outgoing traffic to address"
-
-#~ msgid "Ports allowed for CONNECT method"
-#~ msgstr "Ports allowed for CONNECT method"
-
-#~ msgid "0 = disabled, empty = all"
-#~ msgstr "0 = disabled, empty = all"
-
-#~ msgid "Error document"
-#~ msgstr "Error document"
-
-#~ msgid "Filter list"
-#~ msgstr "Filter list"
-
-#~ msgid "Case sensitive filters"
-#~ msgstr "Case sensitive filters"
-
-#~ msgid "Filter list is a whitelist"
-#~ msgstr "Filter list is a whitelist"
-
-#~ msgid "Extended regular expression filters"
-#~ msgstr "Extended regular expression filters"
-
-#~ msgid "Filter URLs instead of domains"
-#~ msgstr "Filter URLs instead of domains"
-
-#~ msgid "Listen on address"
-#~ msgstr "Listen on address"
-
-#~ msgid "Logfile"
-#~ msgstr "Logfile"
-
-#~ msgid "Maximum number of clients"
-#~ msgstr "Maximum number of clients"
-
-#~ msgid "Maximum requests per thread"
-#~ msgstr "Maximum requests per thread"
-
-#~ msgid "Spare servers to start with"
-#~ msgstr "Spare servers to start with"
-
-#~ msgid "Statistic document"
-#~ msgstr "Statistic document"
-
-#~ msgid "Write to syslog"
-#~ msgstr "Write to syslog"
-
-#~ msgid "Connection Timeout"
-#~ msgstr "Connection Timeout"
-
-#~ msgid "Value of Via-Header"
-#~ msgstr "Value of Via-Header"
-
-#~ msgid "Include client IP"
-#~ msgstr "Include client IP"
-
-#~ msgid "Upstream Control"
-#~ msgstr "Upstream Control"
-
-#~ msgid "Type"
-#~ msgstr "Type"
-
-#~ msgid "Upstream Proxy"
-#~ msgstr "Upstream Proxy"
diff --git a/po/en/transmission.po b/po/en/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/en/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/en/upnp.po b/po/en/upnp.po
deleted file mode 100644
index 0afabe2..0000000
--- a/po/en/upnp.po
+++ /dev/null
@@ -1,160 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr "Enable secure mode"
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid "Log output"
-#~ msgstr "Log output"
-
-#~ msgid ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
-#~ msgstr ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
diff --git a/po/en/ushare.po b/po/en/ushare.po
deleted file mode 100644
index 5e5d65f..0000000
--- a/po/en/ushare.po
+++ /dev/null
@@ -1,49 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Content directories"
-msgstr "Content directories"
-
-msgid "Disable telnet console"
-msgstr "Disable telnet console"
-
-msgid "Disable webinterface"
-msgstr "Disable webinterface"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "Options"
-
-msgid "Servername"
-msgstr "Servername"
-
-msgid "Settings"
-msgstr "Settings"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/en/uvc_streamer.po b/po/en/uvc_streamer.po
deleted file mode 100644
index 1d9825a..0000000
--- a/po/en/uvc_streamer.po
+++ /dev/null
@@ -1,40 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Frames per second"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Resolution"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Settings"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Webcam streaming"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/en/vnstat.po b/po/en/vnstat.po
deleted file mode 100644
index 9d23778..0000000
--- a/po/en/vnstat.po
+++ /dev/null
@@ -1,59 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-16 20:54+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/en/voice_core.po b/po/en/voice_core.po
deleted file mode 100644
index 297f873..0000000
--- a/po/en/voice_core.po
+++ /dev/null
@@ -1,23 +0,0 @@
-# Voice Core.
-# Copyright (C) 2009 Daniel Dickinson
-# Daniel Dickinson <crazycshore@gmail.com>, 2009.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2009-07-16 22:19-0400\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Phones"
-msgstr "Phones"
-
-msgid "Voice"
-msgstr ""
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "Phones"
diff --git a/po/en/voice_diag.po b/po/en/voice_diag.po
deleted file mode 100644
index 12bb459..0000000
--- a/po/en/voice_diag.po
+++ /dev/null
@@ -1,34 +0,0 @@
-# Voice Diagnostics.
-# Copyright (C) 2009 Daniel Dickinson
-# Daniel Dickinson <crazycshore@gmail.com>, 2009.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2009-07-16 22:26-0400\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Diagnostics"
-msgstr "Diagnostics"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system.  These are known as diagnostics."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "Diagnostics"
diff --git a/po/en/watchcat.po b/po/en/watchcat.po
deleted file mode 100644
index 18d19be..0000000
--- a/po/en/watchcat.po
+++ /dev/null
@@ -1,64 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Forced reboot delay"
-msgstr "Forced reboot delay"
-
-msgid "Host address to ping"
-msgstr "Host address to ping"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-
-msgid "Operating mode"
-msgstr "Operating mode"
-
-msgid "Period"
-msgstr "Period"
-
-msgid "Ping host"
-msgstr "Ping host"
-
-msgid "Ping period"
-msgstr "Ping period"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
diff --git a/po/en/wol.po b/po/en/wol.po
deleted file mode 100644
index 0df5a64..0000000
--- a/po/en/wol.po
+++ /dev/null
@@ -1,49 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Broadcast on all interfaces"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Choose the host to wake up or enter a custom MAC address to use"
-
-msgid "Host to wake up"
-msgstr "Host to wake up"
-
-msgid "Network interface to use"
-msgstr "Network interface to use"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Specifies the interface the WoL packet is sent on"
-
-msgid "Starting WoL utility:"
-msgstr "Starting WoL utility:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-
-msgid "Wake up host"
-msgstr "Wake up host"
-
-msgid "WoL program"
-msgstr "WoL program"
diff --git a/po/en/wshaper.po b/po/en/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/en/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/es/ahcp.po b/po/es/ahcp.po
deleted file mode 100644
index b86d357..0000000
--- a/po/es/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-22 21:50+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "Servidor AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP es un protocolo de autoconfiguración para redes con IPv6 o duales IPv6/"
-"IPv4 diseñado para ser usado en lugar de router discovery o DHCP en redes en "
-"las que es difícil o imposible configurar un servidor en cada capa de enlace "
-"del dominio de propagación como las redes móviles ad-hoc."
-
-# "Lease" en el sentido usado en DHCP no tiene una traducción clara en español y se puede usar la misma palabra en que en inglés.
-msgid "Active AHCP Leases"
-msgstr "Cesiones activas AHCP"
-
-msgid "Address"
-msgstr "Dirección"
-
-msgid "Advanced Settings"
-msgstr "Configuración avanzada"
-
-msgid "Age"
-msgstr "Vida"
-
-msgid "Announced DNS servers"
-msgstr "Servidores DNS declarados"
-
-msgid "Announced NTP servers"
-msgstr "Servidores NTP declarados"
-
-msgid "Announced prefixes"
-msgstr "Prefijos declarados"
-
-msgid "Collecting data..."
-msgstr "Obteniendo datos..."
-
-msgid "Forwarder"
-msgstr "Transmisor"
-
-msgid "General Setup"
-msgstr "Configuración general"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 only"
-msgstr "Sólo IPv4"
-
-msgid "IPv6 only"
-msgstr "Sólo IPv6"
-
-msgid "Lease directory"
-msgstr "Directorio de cesiones"
-
-msgid "Lease validity time"
-msgstr "Tiempo de validez de la cesión"
-
-msgid "Log file"
-msgstr "Fichero de registro"
-
-msgid "Multicast address"
-msgstr "Dirección multicast"
-
-msgid "Operation mode"
-msgstr "Modo de funcionamiento"
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Protocol family"
-msgstr "Familia de protocolos"
-
-msgid "Served interfaces"
-msgstr "Interfaces configurados"
-
-msgid "Server"
-msgstr "Servidor"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Especifica los servidores NTP IPv4 e IPv6 declarados"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Especifica los servidores de nombres IPv4 e IPv6 declarados"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Especifica los prefijos de red IPv4 e IPv6 declarados en notación CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr "El Servicio AHCP no está funcionando."
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "El Servicio AHCP está funcionando con el ID %s."
-
-msgid "There are no active leases."
-msgstr "No hay cesiones activas."
-
-msgid "Unique ID file"
-msgstr "ID único de fichero"
diff --git a/po/es/asterisk.po b/po/es/asterisk.po
deleted file mode 100644
index 8e2fe1e..0000000
--- a/po/es/asterisk.po
+++ /dev/null
@@ -1,355 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-04-16 00:52+0200\n"
-"Last-Translator: Jose <jarre2_es_jose@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Opciones Generales de Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Directorio AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Almacena los ficheros de sonido mientras se graba"
-
-#~ msgid "Debug Level"
-#~ msgstr "Nivel de Depuración"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Desactivar algunos avisos"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Volcar núcleo en caso de fallo"
-
-#~ msgid "High Priority"
-#~ msgstr "Prioridad Alta"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Inicializar Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Usar temporización interna"
-
-#~ msgid "Log directory"
-#~ msgstr "Directorio de registro"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Número máximo de llamadas permitidas"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Carga máxima para dejar de admitir nuevas llamadas"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Desactivar colores en la consola"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Directorio de caché de archivos de sonido"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Grupo en el que ejecutarse"
-
-#~ msgid "The User to run as"
-#~ msgstr "Usuario como el que se ejecutará"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Directorio de la cola de mensajes de voz"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Prefijo UniquID con el nombre del sistema"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr ""
-#~ "Construir las rutas de transcodificación usando SLINEAR, no directamente"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Transmitir silencio SLINEAR mientras graba un canal"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Nivel de detalle"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Sección Dialplan"
-
-#~ msgid "include"
-#~ msgstr "incluir"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Extensión Dialplan"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Opciones generales de Dialplan"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Permitir transferencia"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Limpiar las variables globales"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "Dialplan Goto"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Conferencia Dialplan"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Dialplan Time"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Buzón de voz de Dialplan"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Zonas de marcado para Dialplan"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "Prefijo para añadir coincidencias de plan de marcado"
-
-#~ msgid "Match International prefix"
-#~ msgstr "Coincidir con el prefijo internacional"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Prefijo (0) para añadir/eliminar a/de números internacionales"
-
-#~ msgid "localzone"
-#~ msgstr "zona local"
-
-#~ msgid "Match plan"
-#~ msgstr "Coincidir con el plan"
-
-#~ msgid "Connection to use"
-#~ msgstr "Conexión que se utilizará"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Mapa de Funciones Clave"
-
-#~ msgid "Attended transfer key"
-#~ msgstr "Tecla de transferencia asistida"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "Tecla de transferencia ciega"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Tecla para desconectar la llamada"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Tecla para retener la llamada"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Función de llamada en espera"
-
-#~ msgid "ADSI Park"
-#~ msgstr "Llamada en espera ADSI"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "Tiempo de espera de transferencia asistida (seg)"
-
-#~ msgid "One touch record key"
-#~ msgstr "Tecla de grabacion con una sola tecla"
-
-#~ msgid "Name of call context for parking"
-#~ msgstr "Nombre del contexto de la llamada en espera"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Archivo de sonido para reproducir en la llamada en espera"
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr "Tiempo máximo (en ms) entre digitos para la activación de funciones"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Método para encontrar una ranura de llamada en espera"
-
-#~ msgid "parkedmusicclass"
-#~ msgstr "parkedmusicclass"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Reproducir tono de cortesía en"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Activar llamadas en espera"
-
-#~ msgid "Extension to dial to park"
-#~ msgstr "Extensión a marcar para dejar en espera una llamada"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Tiempo de llamada en espera (segs)"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "Rango de extensiones para llamadas en espera"
-
-#~ msgid "Pickup extension"
-#~ msgstr "Extensión de Pickup"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Segundos de espera entre digitos mientras se transfiere"
-
-#~ msgid "sound when attended transfer is complete"
-#~ msgstr "sonido cuando se completa la transferencia asistida"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "sonido para cuando falla la transferencia asistida"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Recargar la configuración del Hardware"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Método de reinicio"
-
-#~ msgid "Parameter"
-#~ msgstr "Parámetro"
-
-#~ msgid "Option type"
-#~ msgstr "Tipo de opción"
-
-#~ msgid "User name"
-#~ msgstr "Nombre de Usuario"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Opciones Generales de IAX"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Permitir Codecs"
-
-#~ msgid "Static"
-#~ msgstr "Estático"
-
-#~ msgid "Write Protect"
-#~ msgstr "Protección contra escritura"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Conferencia Meetme (entre dos)"
-
-#~ msgid "Admin PIN"
-#~ msgstr "PIN de Administrador"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "PIN de Reunión (Meeting)"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Opciones generales de conferencia Meetme (entre dos)"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Número de memorias intermedias de audio de 20 ms a utilizar"
-
-#~ msgid "Modules"
-#~ msgstr "Módulos"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Aplicación de Recepción de Alarma"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Aplicación de autenticación"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "Asegúrate que asterisk no graba CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Comprueba que el canal esté disponible"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Escuchar en cualquier canal"
-
-#~ msgid "Control Playback Application"
-#~ msgstr "Aplicación para el control de reproducción"
-
-#~ msgid "Cuts up variables"
-#~ msgstr "Variables de corte"
-
-#~ msgid "Database access functions"
-#~ msgstr "Funciones de acceso a la Base de Datos"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Aplicación de marcado telefónico"
-
-#~ msgid "Virtual Dictation Machine Application"
-#~ msgstr "Aplicación de máquina de Dictado Virtual"
-
-#~ msgid "Directed Call Pickup Support"
-#~ msgstr "Apoyo a la captura de llamadas dirigidas"
-
-#~ msgid "Extension Directory"
-#~ msgstr "Directorio de Extensiones"
-
-#~ msgid "DISA (Direct Inward System Access) Application"
-#~ msgstr "Aplicación DISA (Acceso directo entrante al sistema)"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Aplicación de Eco Simple"
-
-#~ msgid "ENUM Lookup"
-#~ msgstr "Consulta ENUM"
-
-#~ msgid "Reevaluates strings"
-#~ msgstr "Reevaluar secuencia de caracteres"
-
-#~ msgid "Executes applications"
-#~ msgstr "Ejecuta aplicaciones"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "Interfaz de aplicación IVR externa"
-
-#~ msgid "Fork The CDR into 2 seperate entities"
-#~ msgstr "Bifurcar el CDR en 2 entidades separadas"
-
-#~ msgid "Get ADSI CPE ID"
-#~ msgstr "Obtener el ADSI CPE ID"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Rutinas de Administración de grupo"
-
-#~ msgid "Encode and Stream via icecast and ices"
-#~ msgstr "Codifica y emite a través de icecast e ices"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Aplicación de transmisión de imagen"
-
-#~ msgid "Look up Caller*ID name/number from black"
-#~ msgstr "Buscar la identidad del llamante nombre/número en la lista negra"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr ""
-#~ "Buscar el nombre de identidad del llamante en las bases de datos locales"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Macros de Extensión"
-
-#~ msgid "A simple math Application"
-#~ msgstr "Una simple aplicación matemática"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "Aplicación de suma de verificación MD5"
-
-#~ msgid "Digital Milliwatt (mu-law) Test Application"
-#~ msgstr "Aplicación de testeo de Milivatios Digitales (mu-law)"
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Grabar una llamada y mezclar el sonido durante la grabación"
-
-#~ msgid "Call Parking and Announce Application"
-#~ msgstr "Aplicación de Anuncio y Llamada en Espera"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Aplicación de reproducción trivial"
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Requiere que se introduzca un número de teléfono"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "Lista de espera real de llamadas"
-
-#~ msgid "Random goto"
-#~ msgstr "Goto (ir a) Aleatorio"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Aplicación de lectura de variables"
-
-#~ msgid "Read in a file"
-#~ msgstr "Leer en un archivo"
diff --git a/po/es/base.po b/po/es/base.po
deleted file mode 100644
index d55e15d..0000000
--- a/po/es/base.po
+++ /dev/null
@@ -1,3759 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2013-04-02 09:17+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(ventana de %d minutos, intervalo de %d segundos)"
-
-msgid "(%s available)"
-msgstr "(%s está disponible)"
-
-msgid "(empty)"
-msgstr "(vacío)"
-
-msgid "(no interfaces attached)"
-msgstr "(sin interfaces conectados)"
-
-msgid "-- Additional Field --"
-msgstr "-- Campo Adicional --"
-
-msgid "-- Please choose --"
-msgstr "-- Elija, por favor --"
-
-msgid "-- custom --"
-msgstr "-- introducir --"
-
-msgid "1 Minute Load:"
-msgstr "Carga a 1 minuto:"
-
-msgid "15 Minute Load:"
-msgstr "Carga a 15 minutos:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz 2º canal por encima"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz 2º canal por debajo"
-
-msgid "5 Minute Load:"
-msgstr "Carga a 5 minutos:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-"<abbr title=\"Identificador de conjunto de servicios básicos\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "Puerto de consultas al <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "Puerto del servidor <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"Los servidores de <abbr title=\"Domain Name System\">DNS</abbr> se consultan "
-"en el orden en que aparecen en el fichero resolv"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"<abbr title=\"Identificador de conjunto de servicios extendidos\">ESSID</"
-"abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Dirección <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr ""
-"Puerta de enlace <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "Máscara de red <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"Dirección o red (CIDR)<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr ""
-"Puerta de enlace <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Configuración de <abbr title=\"Light Emitting Diode\">LEDs</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Nombre del <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Dirección <abbr title=\"Media Access Control\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"Máximas cesiones <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr "Tamaño máximo de paquetes EDNS0"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "Máximo número de consultas concurrentes"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Pairwise: %s / Grupo: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "Soporte a AR"
-
-msgid "ARP retry threshold"
-msgstr "Umbral de reintento ARP"
-
-msgid "ATM Bridges"
-msgstr "Puente ATM"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "Identificador de canal virtual ATM (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "Identificador de camino virtual ATM (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"Los puentes ATM exponen conexiones AAL5 ethernet encapsuladas como "
-"interfaces de red Linux que se pueden usar junto a DHCP o PPP para conectar "
-"a la red del proveedor."
-
-msgid "ATM device number"
-msgstr "Número de dispositivo ATM"
-
-msgid "Accept router advertisements"
-msgstr "Aceptar anuncios del router"
-
-msgid "Access Concentrator"
-msgstr "Concentrador de acceso"
-
-msgid "Access Point"
-msgstr "Punto de Acceso"
-
-msgid "Action"
-msgstr "Acción"
-
-msgid "Actions"
-msgstr "Acciones"
-
-msgid "Activate this network"
-msgstr "Activar esta red"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Rutas activas <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Rutas activas <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "Active Connections"
-msgstr "Conexiones activas"
-
-msgid "Active DHCP Leases"
-msgstr "Cesiones DHCP activas"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Cesiones DHCPv6 activas"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Añadir"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-"Añadir el sufijo de dominio local a los nombres servidos desde el fichero de "
-"máquinas"
-
-msgid "Add new interface..."
-msgstr "Añadir nueva interfaz..."
-
-msgid "Additional Hosts files"
-msgstr "Ficheros de máquinas adicionales"
-
-msgid "Address"
-msgstr "Dirección"
-
-msgid "Address to access local relay bridge"
-msgstr "Dirección del puente relé local"
-
-msgid "Administration"
-msgstr "Administración"
-
-msgid "Advanced Settings"
-msgstr "Configuración avanzada"
-
-msgid "Advertise IPv6 on network"
-msgstr "Anunciar IPv6 en la red"
-
-msgid "Advertised network ID"
-msgstr "ID de red anunciado"
-
-msgid "Alert"
-msgstr "Alerta"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Permitir autenticación de contraseña via <abbr title=\"Secure Shell\">SSH</"
-"abbr>"
-
-msgid "Allow all except listed"
-msgstr "Permitir a todos excepto a los de la lista"
-
-msgid "Allow listed only"
-msgstr "Permitir a los pertenecientes en la lista"
-
-msgid "Allow localhost"
-msgstr "Permitir a la propia máquina"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr "Permitir a máquinas remotas conectar a puestos SSH locales traspasados"
-
-msgid "Allow root logins with password"
-msgstr "Permitir conexiones a root con contraseña"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Permitir al usuario <em>root</em> conectar con contraseña"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Permitir respuestas en el rango 127.0.0.0/8, por ejemplo para servicios RBL"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "El rango permitido es desde 1 hasta 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-"Usar canales de 40MHz aunque el canal secundario solape con otro. ¡El "
-"estándar IEEE 802.11n-2009 indica que no es correcto hacer esto!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Se creará una red adicional si deja esto desmarcado."
-
-msgid "Antenna 1"
-msgstr "Antena 1"
-
-msgid "Antenna 2"
-msgstr "Antena 2"
-
-msgid "Antenna Configuration"
-msgstr "Configuración de la antena"
-
-msgid "Any zone"
-msgstr "Cualquier zona"
-
-msgid "Apply"
-msgstr "Aplicar"
-
-msgid "Applying changes"
-msgstr "Aplicando cambios"
-
-msgid "Assign interfaces..."
-msgstr "Asigne interfaces..."
-
-msgid "Associated Stations"
-msgstr "Estaciones asociadas"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Controlador inalámbrico 802.11%s Atheros"
-
-msgid "Authentication"
-msgstr "Autentificación"
-
-msgid "Authoritative"
-msgstr "Autorizado"
-
-msgid "Authorization Required"
-msgstr "Conéctese"
-
-msgid "Auto Refresh"
-msgstr "Autorefresco"
-
-msgid "Available"
-msgstr "Disponible"
-
-msgid "Available packages"
-msgstr "Paquetes disponibles"
-
-msgid "Average:"
-msgstr "Media:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Volver"
-
-msgid "Back to Overview"
-msgstr "Volver al resumen"
-
-msgid "Back to configuration"
-msgstr "Volver a la configuración"
-
-msgid "Back to overview"
-msgstr "Volver al resumen"
-
-msgid "Back to scan results"
-msgstr "Volver a resultados de la exploración"
-
-msgid "Background Scan"
-msgstr "Exploración en segundo plano"
-
-msgid "Backup / Flash Firmware"
-msgstr "Copia de seguridad / Grabar firmware"
-
-msgid "Backup / Restore"
-msgstr "Salvar / Restaurar"
-
-msgid "Backup file list"
-msgstr "Salvar lista de ficheros"
-
-msgid "Bad address specified!"
-msgstr "¡Dirección no válida!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Lista de ficheros a los que hacer copia de seguridad. Es una lista de "
-"ficheros de configuración cambiados por ficheros marcados por opkg, ficheros "
-"esenciales base y los patrones de copia de seguridad definidos por el "
-"usuario."
-
-msgid "Bitrate"
-msgstr "Bitrate"
-
-msgid "Bogus NX Domain Override"
-msgstr "Ignorar dominio falso NX"
-
-msgid "Bridge"
-msgstr "Puente"
-
-msgid "Bridge interfaces"
-msgstr "Puentear interfaces"
-
-msgid "Bridge unit number"
-msgstr "Número de unidad del puente"
-
-msgid "Bring up on boot"
-msgstr "Activar en el arranque"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Controlador inalámbrico 802.11%s Broadcom"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Controlador inalámbrico 802.11 BCM%04x"
-
-msgid "Buffered"
-msgstr "En búfer"
-
-msgid "Buttons"
-msgstr "Botones"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "Uso de CPU (%)"
-
-msgid "Cached"
-msgstr "En caché"
-
-msgid "Cancel"
-msgstr "Cancelar"
-
-msgid "Chain"
-msgstr "Cadena"
-
-msgid "Changes"
-msgstr "Cambios"
-
-msgid "Changes applied."
-msgstr "Cambios aplicados."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Cambie la contraseña del administrador para acceder al dispositivo"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check"
-msgstr "Comprobar"
-
-msgid "Checksum"
-msgstr "Comprobación"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Elija la zona del cortafuegos a la que quiere asignar esta interfaz. "
-"Seleccione <em>no especificado</em> para eliminar la interfaz de la zona "
-"asociada o rellene el campo <em>crear</em> para definir una zona nueva a la "
-"que asignarla."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Elija la red o redes a las que quiere unir esta interfaz inalámbrica o vacíe "
-"el campo <em>crear</em> para definir una red nueva."
-
-msgid "Cipher"
-msgstr "Cifrado"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Pulse \"generar archivo\" para descargar un fichero tar con los ficheros de "
-"configuración actuales. Para reiniciar el firmware a su estado inicial pulse "
-"\"Reiniciar\" (sólo posible con imágenes squashfs)."
-
-msgid "Client"
-msgstr "Cliente"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "ID de cliente que se enviará al solicitar DHCP"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Cerrar las conexiones inactivas tras los segundos dados. Use 0 para una "
-"conexión permanente"
-
-msgid "Close list..."
-msgstr "Cerrar lista..."
-
-msgid "Collecting data..."
-msgstr "Un momento..."
-
-msgid "Command"
-msgstr "Comando"
-
-msgid "Common Configuration"
-msgstr "Configuración común"
-
-msgid "Compression"
-msgstr "Compresión"
-
-msgid "Configuration"
-msgstr "Configuración"
-
-msgid "Configuration applied."
-msgstr "Configuración establecida."
-
-msgid "Configuration files will be kept."
-msgstr "Se mantendrán los ficheros de configuración."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Configura este punto de montaje como almacenamiento de overlay para block-"
-"extroot"
-
-msgid "Confirmation"
-msgstr "Confirmación"
-
-msgid "Connect"
-msgstr "Conectar"
-
-msgid "Connected"
-msgstr "Conectado"
-
-msgid "Connection Limit"
-msgstr "Límite de conexión"
-
-msgid "Connections"
-msgstr "Conexiones"
-
-msgid "Country"
-msgstr "País"
-
-msgid "Country Code"
-msgstr "Código de país"
-
-msgid "Cover the following interface"
-msgstr "Cubre el interfaz siguiente"
-
-msgid "Cover the following interfaces"
-msgstr "Cubre los siguientes interfaces"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Crear / Asignar zona de seguridad"
-
-msgid "Create Interface"
-msgstr "Crear interfaz"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Crear un puente sobre múltiples interfaces"
-
-msgid "Critical"
-msgstr "Crítico"
-
-msgid "Cron Log Level"
-msgstr "Nivel de registro de cron"
-
-msgid "Custom Interface"
-msgstr "Interfaz propio"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Personaliza el comportamiento de los <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s del dispositivo, si es posible."
-
-msgid "DHCP Leases"
-msgstr "Cesiones DHCP"
-
-msgid "DHCP Server"
-msgstr "Servidor DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP y DNS"
-
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-msgid "DHCP-Options"
-msgstr "Opciones de DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "Cesiones DHCPv6"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Retransmisión DNS"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Depuración"
-
-msgid "Default %d"
-msgstr "%d por defecto"
-
-msgid "Default gateway"
-msgstr "Gateway por defecto"
-
-msgid "Default state"
-msgstr "Estado por defecto"
-
-msgid "Define a name for this network."
-msgstr "Definir un nombre para esta red."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Definir optiones adicionales DHCP, por ejemplo "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" que publica diferentes servidores "
-"DNS a los clientes."
-
-msgid "Delete"
-msgstr "Eliminar"
-
-msgid "Delete this interface"
-msgstr "Borrar esta interfaz"
-
-msgid "Delete this network"
-msgstr "Borrar esta red"
-
-msgid "Description"
-msgstr "Descripción"
-
-msgid "Design"
-msgstr "Diseño"
-
-msgid "Destination"
-msgstr "Destino"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid "Device Configuration"
-msgstr "Configuración del dispositivo"
-
-msgid "Diagnostics"
-msgstr "Diagnósticos"
-
-msgid "Directory"
-msgstr "Directorio"
-
-msgid "Disable"
-msgstr "Desactivar"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Desactivar <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-"para esta interfaz."
-
-msgid "Disable DNS setup"
-msgstr "Desactivar configuración de DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Desactivar el temporizador de baliza hardware"
-
-msgid "Disabled"
-msgstr "Desactivar"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Descartar respuestas RFC1918 salientes"
-
-msgid "Displaying only packages containing"
-msgstr "Mostrar sólo paquete que contienen"
-
-msgid "Distance Optimization"
-msgstr "Optimización de distancia"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distancia al miembro de la red mas lejana en metros."
-
-msgid "Diversity"
-msgstr "Diversidad"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq es un programa que combina un servidor <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr> y un reenviador <abbr title=\"Domain "
-"Name System\">DNS</abbr> para cortafuegos <abbr title=\"Network Address "
-"Translation\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "No guardar respuestas negativas, por ejemplo dominios inexistentes"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"No retransmitir peticiones que no se puedan responder por servidores de "
-"nombres públicos"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "No retransmitir búsquedas inversas para redes locales"
-
-msgid "Do not send probe responses"
-msgstr "No enviar respuestas de prueba"
-
-msgid "Domain required"
-msgstr "Dominio requerido"
-
-msgid "Domain whitelist"
-msgstr "Lista blanca de dominios"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"No reenviar peticiones de <abbr title=\"Domain Name System\">DNS</abbr> sin "
-"un nombre de <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "Download and install package"
-msgstr "Descargar e instalar paquete"
-
-msgid "Download backup"
-msgstr "Descargar copia de seguridad"
-
-msgid "Dropbear Instance"
-msgstr "Instancia Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear ofrece acceso <abbr title=\"Secure Shell\">SSH</abbr> y un servidor "
-"<abbr title=\"Secure Copy\">SCP</abbr>"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> dinámico"
-
-msgid "Dynamic tunnel"
-msgstr "Túnel dinámico"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Reparte direcciones DHCP dinámicamente a los clientes. Si se desactiva sólo "
-"se servirá a clientes con cesiones estáticas."
-
-msgid "EAP-Method"
-msgstr "Método EAP"
-
-msgid "Edit"
-msgstr "Editar"
-
-msgid "Edit this interface"
-msgstr "Editar esta interfaz"
-
-msgid "Edit this network"
-msgstr "Editar esta red"
-
-msgid "Emergency"
-msgstr "Emergencia"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Activar <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Activar actualización dinámica de punto final HE.net"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Activar negociación IPv6 en el enlace PPP"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Activar paso de tramas jumbo"
-
-msgid "Enable NTP client"
-msgstr "Activar cliente NTP"
-
-msgid "Enable TFTP server"
-msgstr "Activar servidor TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "Activar funcionalidad VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Activar aprendizaje y envejecimiento"
-
-msgid "Enable this mount"
-msgstr "Active este punto de montaje"
-
-msgid "Enable this swap"
-msgstr "Activar este swap"
-
-msgid "Enable/Disable"
-msgstr "Activar/Desactivar"
-
-msgid "Enabled"
-msgstr "Activado"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Activa el protocol STP en este puente"
-
-msgid "Encapsulation mode"
-msgstr "Modo de encapsulado"
-
-msgid "Encryption"
-msgstr "Encriptación"
-
-msgid "Erasing..."
-msgstr "Borrando..."
-
-msgid "Error"
-msgstr "Error"
-
-msgid "Ethernet Adapter"
-msgstr "Adaptador ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Switch ethernet"
-
-msgid "Expand hosts"
-msgstr "Expandir nombre de máquina"
-
-msgid "Expires"
-msgstr "Expira"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Tiempo de finalización de direcciones cedidas (mínimo dos minutos: <code>2m</"
-"code>)."
-
-msgid "External system log server"
-msgstr "Servidor externo de registro del sistema"
-
-msgid "External system log server port"
-msgstr "Puerto del servidor externo de registro del sistema"
-
-msgid "Fast Frames"
-msgstr "Tramas rápidas"
-
-msgid "File"
-msgstr "Fichero"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Nombre del fichero de imagen de arranque mostrado a los clientes"
-
-msgid "Filesystem"
-msgstr "Sistema de ficheros"
-
-msgid "Filter"
-msgstr "Filtro"
-
-msgid "Filter private"
-msgstr "Filtro privado"
-
-msgid "Filter useless"
-msgstr "Filtro inútil"
-
-msgid "Find and join network"
-msgstr "Encontrar y unirse a red"
-
-msgid "Find package"
-msgstr "Buscar paquete"
-
-msgid "Finish"
-msgstr "Terminar"
-
-msgid "Firewall"
-msgstr "Cortafuegos"
-
-msgid "Firewall Settings"
-msgstr "Configuración del cortafuegos"
-
-msgid "Firewall Status"
-msgstr "Estado del cortafuegos"
-
-msgid "Firmware Version"
-msgstr "Versión del firmware"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Puerto origen fijo para peticiones de DNS salientes"
-
-msgid "Flags"
-msgstr "Indicadores"
-
-msgid "Flash Firmware"
-msgstr "Grabar firmware"
-
-msgid "Flash image..."
-msgstr "Grabar imagen..."
-
-msgid "Flash new firmware image"
-msgstr "Grabar imágenes del firmware"
-
-msgid "Flash operations"
-msgstr "Operaciones de grabado"
-
-msgid "Flashing..."
-msgstr "Grabando..."
-
-msgid "Force"
-msgstr "Forzar"
-
-msgid "Force 40MHz mode"
-msgstr "Forzar modo 40MHz"
-
-msgid "Force CCMP (AES)"
-msgstr "Forzar CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Forzar DHCP en esta red aunque se detecte otro servidor."
-
-msgid "Force TKIP"
-msgstr "Forzar TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Forzar TKIP y CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Retransmitir tráfico DHCP"
-
-msgid "Forward broadcast traffic"
-msgstr "Retransmitir tráfico de propagación"
-
-msgid "Forwarding mode"
-msgstr "Modo de retransmisión"
-
-msgid "Fragmentation Threshold"
-msgstr "Umbral de fragmentación"
-
-# It should be "Frame Bursting" at once!
-msgid "Frame Bursting"
-msgstr "Frame Bursting"
-
-msgid "Free"
-msgstr "Libre"
-
-msgid "Free space"
-msgstr "Espacio libre"
-
-msgid "Frequency Hopping"
-msgstr "Saltos de Frecuencia"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "Sólo GPRS"
-
-msgid "Gateway"
-msgstr "Pasarela"
-
-msgid "Gateway ports"
-msgstr "Puertos del gateway"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "General Setup"
-msgstr "Configuración general"
-
-msgid "Generate archive"
-msgstr "Generar archivo"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Controlador inalámbrico 802.11%s genérico"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-"La confirmación y la contraseña no coinciden. ¡No se ha cambiado la "
-"contraseña!"
-
-msgid "Go to password configuration..."
-msgstr "Ir a configuración de contraseña..."
-
-msgid "Go to relevant configuration page"
-msgstr "Ir a la página principal de configuración"
-
-msgid "HE.net password"
-msgstr "Contraseña HE.net"
-
-msgid "HE.net user ID"
-msgstr "ID de usuario de HE.net"
-
-msgid "HT capabilities"
-msgstr "Habilidades HT"
-
-msgid "HT mode"
-msgstr "Modo HT"
-
-msgid "Handler"
-msgstr "Manejador"
-
-msgid "Hang Up"
-msgstr "Suspender"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Aspectos básicos de su dispositivo como la zona horaria o nombre de máquina."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr "Claves públicas SSH. Ponga una por línea."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Controlador inalámbrico 802.11b Hermes"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Ocultar <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Entradas de máquina"
-
-msgid "Host expiry timeout"
-msgstr "Espera para caducidad de máquinas"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"Dirección <abbr title=\"Internet Protocol Address\">IP</abbr> de máquina o "
-"red"
-
-msgid "Hostname"
-msgstr "Nombre de máquina"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Nombre de máquina a enviar cuando se solicite DHCP"
-
-msgid "Hostnames"
-msgstr "Nombres de máquina"
-
-msgid "IP address"
-msgstr "Dirección IP"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "Cortafuegos IPv4"
-
-msgid "IPv4 WAN Status"
-msgstr "Estado de la WAN IPv4"
-
-msgid "IPv4 address"
-msgstr "Dirección IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "Propagación IPv4"
-
-msgid "IPv4 gateway"
-msgstr "Gateway IPv4"
-
-msgid "IPv4 netmask"
-msgstr "Máscara de red IPv4"
-
-msgid "IPv4 only"
-msgstr "Sólo IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "Longitud de prefijo IPv4"
-
-msgid "IPv4-Address"
-msgstr "Dirección IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "Cortafuegos IPv6"
-
-msgid "IPv6 WAN Status"
-msgstr "Estado de la WAN IPv6"
-
-msgid "IPv6 address"
-msgstr "Dirección IPv6"
-
-msgid "IPv6 gateway"
-msgstr "Gateway IPv6"
-
-msgid "IPv6 only"
-msgstr "Sólo IPv6"
-
-msgid "IPv6 prefix"
-msgstr "Prefijo IPv6"
-
-msgid "IPv6 prefix length"
-msgstr "Longitud de prefijo IPv6"
-
-msgid "IPv6-Address"
-msgstr "Dirección IPv6"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-en-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-sobre-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-sobre-IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "Identidad"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Montar el dispositivo por su UUID en vez de un nodo fijo de dispositivo si "
-"se especifica"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Montar el dispositivo por la etiqueta de la partición en vez de por el nodo "
-"fijo de dispositivo si se especifica"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Si está desmarcado no se configurará una ruta por defecto"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-"Si está desmarcado las direcciones de servidor DNS anunciadas se ignorarán"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Si su dispositivo no tiene memoria <abbr title=\"Random Access Memory\">RAM</"
-"abbr> suficiente, los datos no utilizados pueden ser guardados temporalmente "
-"en un dispositivo de intercambio (swap-device) liberando el espacio que "
-"ocupan. Tenga en cuenta que el intercambio es un proceso lento porque los "
-"dispositivos de intercambio no pueden transferir volúmenes de información a "
-"alta velocidad tal y como hace la memoria <abbr title=\"Random Access Memory"
-"\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Ignorar fichero de máquinas"
-
-msgid "Ignore interface"
-msgstr "Ignorar interfaz"
-
-msgid "Ignore resolve file"
-msgstr "Ignorar el fichero resolv"
-
-msgid "Image"
-msgstr "Imagen"
-
-msgid "In"
-msgstr "Entrada"
-
-msgid "Inactivity timeout"
-msgstr "Espera de inactividad"
-
-msgid "Inbound:"
-msgstr "Entrantes:"
-
-msgid "Info"
-msgstr "Información"
-
-msgid "Initscript"
-msgstr "Nombre del script de inicio"
-
-msgid "Initscripts"
-msgstr "Scripts de inicio"
-
-msgid "Install"
-msgstr "Instalar"
-
-msgid "Install package %q"
-msgstr "Instalar el paquete %q"
-
-msgid "Install protocol extensions..."
-msgstr "Instalar extensiones de protocolo..."
-
-msgid "Installed packages"
-msgstr "Paquetes instalados"
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid "Interface Configuration"
-msgstr "Configuración del interfaz"
-
-msgid "Interface Overview"
-msgstr "Resumen de interfaces"
-
-msgid "Interface is reconnecting..."
-msgstr "Reconectando interfaz..."
-
-msgid "Interface is shutting down..."
-msgstr "Parando interfaz..."
-
-msgid "Interface not present or not connected yet."
-msgstr "El interfaz no existe o no está aún conectado."
-
-msgid "Interface reconnected"
-msgstr "Interfaz reconectado"
-
-msgid "Interface shut down"
-msgstr "Interfaz detenido"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internal Server Error"
-msgstr "Error interno del servidor"
-
-msgid "Invalid"
-msgstr "Valor ingresado inválido"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "¡ID VLAN no válido! Sólo se permiten IDs entre %d y %d."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "¡ID VLAN no válido! Sólo se permiten IDs únicos"
-
-msgid "Invalid username and/or password! Please try again."
-msgstr ""
-"¡Nombre de usuario o contraseña no válidos!. Pruebe de nuevo, por favor."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Parece que está intentando grabar una imagen de firmware mayor que la "
-"memoria flash de su equipo. ¡Por favor verifique el archivo!"
-
-msgid "Java Script required!"
-msgstr "¡Se necesita JavaScript!"
-
-msgid "Join Network"
-msgstr "Unirse a Red"
-
-msgid "Join Network: Settings"
-msgstr "Unirse a Red: Configuración"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Unirse a una red: Exploración inalámbrica"
-
-msgid "Keep settings"
-msgstr "Conservar la configuración del router"
-
-msgid "Kernel Log"
-msgstr "Registro del Kernel"
-
-msgid "Kernel Version"
-msgstr "Versión del Kernel"
-
-msgid "Key"
-msgstr "Clave"
-
-msgid "Key #%d"
-msgstr "Clave #%d"
-
-msgid "Kill"
-msgstr "Matar"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "Servidor L2TP"
-
-msgid "LCP echo failure threshold"
-msgstr "Umbral de fracaso en eco LCP"
-
-msgid "LCP echo interval"
-msgstr "Intervalo de eco LCP"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Etiqueta"
-
-msgid "Language"
-msgstr "Idioma"
-
-msgid "Language and Style"
-msgstr "Idioma y Estilo"
-
-msgid "Lease validity time"
-msgstr "Tiempo de validación de cesión"
-
-msgid "Leasefile"
-msgstr "Archivo de cesiones"
-
-msgid "Leasetime"
-msgstr "Tiempo de cesión"
-
-msgid "Leasetime remaining"
-msgstr "Tiempo de cesión restante"
-
-msgid "Leave empty to autodetect"
-msgstr "Dejar vacío para autodetectar"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Dejar vacío para usar la dirección WAN actual"
-
-msgid "Legend:"
-msgstr "Leyenda:"
-
-msgid "Limit"
-msgstr "Límite"
-
-msgid "Link On"
-msgstr "Enlace activado"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Lista de servidores <abbr title=\"Domain Name System\">DNS</abbr> a los que "
-"enviar solicitudes"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Lista de dominios a los que se permiten respuestas RFC1918"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "Lista de máquinas que proporcionan resultados de dominio NX falsos"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr "Escucha solo en la interfaz dada o, si no se especifica, en todas"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Puerto de escucha para consultas DNS entrantes"
-
-msgid "Load"
-msgstr "Carga"
-
-msgid "Load Average"
-msgstr "Carga Media"
-
-msgid "Loading"
-msgstr "Cargando"
-
-msgid "Local IPv4 address"
-msgstr "Dirección local IPv4"
-
-msgid "Local IPv6 address"
-msgstr "Dirección local IPv6"
-
-msgid "Local Startup"
-msgstr "Arranque local"
-
-msgid "Local Time"
-msgstr "Hora local"
-
-msgid "Local domain"
-msgstr "Dominio local"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Especificación de dominio local. Los nombres que coincidan con este dominio "
-"nunca se retransmiten y se resuelven desde DHCP o ficheros de máquina locales"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Sufijo del dominio local que se añade a los nombres DHCP y a las entradas "
-"del fichero de máquinas"
-
-msgid "Local server"
-msgstr "Servidor local"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Localizar nombre de máquina dependiendo de que la subred peticionaria si hay "
-"disponibles múltiples IPs"
-
-msgid "Localise queries"
-msgstr "Localizar consultas"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Bloqueado al canal %d usado por %s"
-
-msgid "Log output level"
-msgstr "Nivel de registro"
-
-msgid "Log queries"
-msgstr "Registrar consultas"
-
-msgid "Logging"
-msgstr "Registro"
-
-msgid "Login"
-msgstr "Iniciar sesión"
-
-msgid "Logout"
-msgstr "Cerrar sesión"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "Dirección cedida más baja como diferencia de la dirección de red."
-
-msgid "MAC-Address"
-msgstr "Dirección MAC"
-
-msgid "MAC-Address Filter"
-msgstr "Filtro por dirección MAC"
-
-msgid "MAC-Filter"
-msgstr "Filtro por dirección MAC"
-
-msgid "MAC-List"
-msgstr "Lista de direcciones MAC"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Ratio Máximo"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Número máximo de cesiones DHCP activas"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Número máximo de consultas DNS concurrentes"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Tamaño máximo de paquetes EDNS.0 paquetes UDP"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Segundos máximos de espera a que el módem esté activo"
-
-msgid "Maximum hold time"
-msgstr "Pausa máxima de transmisión"
-
-msgid "Maximum number of leased addresses."
-msgstr "Máximas cesiones activas."
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "Memoria"
-
-msgid "Memory usage (%)"
-msgstr "Uso de memoria (%)"
-
-msgid "Metric"
-msgstr "Métrica"
-
-msgid "Minimum Rate"
-msgstr "Ratio mínimo"
-
-msgid "Minimum hold time"
-msgstr "Pausa mínima de espera"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Extensión de protocolo faltante para %q"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid "Modem device"
-msgstr "Dispositivo de módem"
-
-msgid "Modem init timeout"
-msgstr "Espera de inicialización del modem"
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr "Entrada de montaje"
-
-msgid "Mount Point"
-msgstr "Punto de montaje"
-
-msgid "Mount Points"
-msgstr "Puntos de montaje"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Puntos de montaje - Entrada de montaje"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Puntos de montaje - Entrada de intercambio"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Los puntos de montaje definen el directorio en el que un dispositivo de "
-"memoria se unirá al sistema del archivos"
-
-msgid "Mount options"
-msgstr "Opciones de montaje"
-
-msgid "Mount point"
-msgstr "Punto de montaje"
-
-msgid "Mounted file systems"
-msgstr "Sistemas de archivo montados"
-
-msgid "Move down"
-msgstr "Bajar"
-
-msgid "Move up"
-msgstr "Subir"
-
-msgid "Multicast Rate"
-msgstr "Ratio multicast"
-
-msgid "Multicast address"
-msgstr "Dirección multicast"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "Servidores NTP a consultar"
-
-msgid "Name"
-msgstr "Nombre"
-
-msgid "Name of the new interface"
-msgstr "Nombre de la nueva interfaz"
-
-msgid "Name of the new network"
-msgstr "Nombre de la nueva red"
-
-msgid "Navigation"
-msgstr "Navegación"
-
-msgid "Netmask"
-msgstr "Máscara de red"
-
-msgid "Network"
-msgstr "Red"
-
-msgid "Network Utilities"
-msgstr "Utilidades de red"
-
-msgid "Network boot image"
-msgstr "Imagen de arranque en red"
-
-msgid "Network without interfaces."
-msgstr "Red sin interfaces."
-
-msgid "Next »"
-msgstr "Siguiente »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "No se ha configurado un servidor DHCP para esta interfaz"
-
-msgid "No chains in this table"
-msgstr "No hay cadenas en esta tabla"
-
-msgid "No files found"
-msgstr "No se han encontrado ficheros"
-
-msgid "No information available"
-msgstr "No hay información disponible"
-
-msgid "No negative cache"
-msgstr "Sin caché negativa"
-
-msgid "No network configured on this device"
-msgstr "No hay red configurada para este dispositivo"
-
-msgid "No network name specified"
-msgstr "No se ha especificado un nombre de red"
-
-msgid "No package lists available"
-msgstr "No hay listas de paquetes disponibles"
-
-msgid "No password set!"
-msgstr "¡Sin contraseña!"
-
-msgid "No rules in this chain"
-msgstr "No hay reglas en esta cadena"
-
-msgid "No zone assigned"
-msgstr "Sin zona asignada"
-
-msgid "Noise"
-msgstr "Ruido"
-
-msgid "Noise:"
-msgstr "Ruido:"
-
-msgid "None"
-msgstr "Ninguno"
-
-msgid "Normal"
-msgstr "Normal"
-
-msgid "Not Found"
-msgstr "No encontrado"
-
-msgid "Not associated"
-msgstr "No asociado"
-
-msgid "Not connected"
-msgstr "No conectado"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Nota: se borrarán los ficheros de configuración."
-
-msgid "Notice"
-msgstr "Aviso"
-
-msgid "Nslookup"
-msgstr "NSLookup"
-
-msgid "OK"
-msgstr "Aceptar"
-
-msgid "OPKG-Configuration"
-msgstr "Configuración de OPKG"
-
-msgid "Off-State Delay"
-msgstr "Retraso de desconexión"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Configure las interfaces de red. Puede hacer puentes con diferentes "
-"interfaces, marcando el campo \"puentear interfaces\" e introduciendo el "
-"nombre de las mismas separadas por espacios. También puede usar la notación "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr>, <samp>INTERFACE."
-"VLANNR</samp> (<abbr title=\"por ejemplo\">Ej.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Retraso de activación"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr "¡Debe especificar al menos un nombre de máquina o dirección mac!"
-
-msgid "One or more fields contain invalid values!"
-msgstr "¡Valores no válidos!"
-
-msgid "One or more required fields have no value!"
-msgstr "¡Campos vacíos!"
-
-msgid "Open list..."
-msgstr "Abrir lista..."
-
-msgid "Option changed"
-msgstr "Opción cambiada"
-
-msgid "Option removed"
-msgstr "Opción eliminada"
-
-msgid "Options"
-msgstr "Opciones"
-
-msgid "Other:"
-msgstr "Otros:"
-
-msgid "Out"
-msgstr "Salida"
-
-msgid "Outbound:"
-msgstr "Saliente:"
-
-msgid "Outdoor Channels"
-msgstr "Canales al aire libre"
-
-msgid "Override MAC address"
-msgstr "Ignorar dirección MAC"
-
-msgid "Override MTU"
-msgstr "Ignorar MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Ignorar la pasarela en las respuestas DHCP"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Ignorar la máscara de red enviada a los clientes. Normalmente se calcula "
-"desde la subred desde la que se sirve."
-
-msgid "Override the table used for internal routes"
-msgstr "Ignorar la tabla usada para rutas internas"
-
-msgid "Overview"
-msgstr "Descripción general"
-
-msgid "Owner"
-msgstr "Propietario"
-
-msgid "PAP/CHAP password"
-msgstr "Contraseña PAP/CHAP"
-
-msgid "PAP/CHAP username"
-msgstr "Nombre de usuario PAP/CHAP"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "Encapsulación PPPoA"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "¡Se necesita el paquete libiwinfo!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Las listas de paquetes tienen más de 24 horas"
-
-msgid "Package name"
-msgstr "Nombre del paquete"
-
-msgid "Packets"
-msgstr "Paquetes"
-
-msgid "Part of zone %q"
-msgstr "Parte de zona %q"
-
-msgid "Password"
-msgstr "Contraseña"
-
-msgid "Password authentication"
-msgstr "Autentificación de contraseña"
-
-msgid "Password of Private Key"
-msgstr "Contraseña de la Clave Privada"
-
-msgid "Password successfully changed!"
-msgstr "¡Contraseña cambiada!"
-
-msgid "Path to CA-Certificate"
-msgstr "Ruta al Certificado CA"
-
-msgid "Path to Client-Certificate"
-msgstr "Camino al certificado de cliente"
-
-msgid "Path to Private Key"
-msgstr "Ruta a la Clave Privada"
-
-msgid "Path to executable which handles the button event"
-msgstr "Ruta al ejecutable que maneja el evento button"
-
-msgid "Peak:"
-msgstr "Pico:"
-
-msgid "Perform reboot"
-msgstr "Rearrancar"
-
-msgid "Perform reset"
-msgstr "Reiniciar"
-
-msgid "Phy Rate:"
-msgstr "Ratio Phy:"
-
-msgid "Physical Settings"
-msgstr "Configuración física"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "Paq."
-
-msgid "Please enter your username and password."
-msgstr "Por favor introduzca su nombre de usuario y contraseña."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Espere, por favor: Rearrancando dispositivo..."
-
-msgid "Policy"
-msgstr "Política"
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Port %d"
-msgstr "Puerto %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "¡El puerto %d está desmarcado en múltiples VLANs!"
-
-msgid "Port status:"
-msgstr "Estado del puerto:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Asumir que el otro estará muerto tras estos fallos de echo LCP, use 0 para "
-"ignorar fallos"
-
-msgid "Prevents client-to-client communication"
-msgstr "Impide la comunicación cliente a cliente"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Controlador inalámbrico 802.11n Prism2/2.5/3"
-
-msgid "Proceed"
-msgstr "Proceder"
-
-msgid "Processes"
-msgstr "Procesos"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Protocol family"
-msgstr "Familia de procolo"
-
-msgid "Protocol of the new interface"
-msgstr "Protocolo de la nueva interfaz"
-
-msgid "Protocol support is not installed"
-msgstr "No está instalado el soporte al protocolo"
-
-msgid "Provide NTP server"
-msgstr "Introduzca el servidor NTP"
-
-msgid "Provide new network"
-msgstr "Introduzca una nueva red"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Calidad"
-
-msgid "RTS/CTS Threshold"
-msgstr "Umbral RTS/CTS"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "Ratio RX"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "Controlador inalámbrico 802.11%s RaLink"
-
-msgid "Radius-Accounting-Port"
-msgstr "Puerto de contabilidad Radius"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Secreto de contabilidad Radius"
-
-msgid "Radius-Accounting-Server"
-msgstr "Servidor de contabilidad Radius"
-
-msgid "Radius-Authentication-Port"
-msgstr "Puerto de autentificación Radius"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Secreto de autentificación Radius"
-
-msgid "Radius-Authentication-Server"
-msgstr "Servidor de autentificación Radius"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Leer <code>/etc/ethers</code> para configurar el servidor <abbr title="
-"\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"¿Está seguro de borrar esta interfaz?. ¡No será posible deshacer el "
-"borrado!\n"
-"Puede perder el acceso a este dispositivo si está conectado por esta "
-"interfaz."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"¿Está seguro de borrar esta red inalámbrica?. ¡No será posible deshacer el "
-"borrado!\n"
-"Puede perder el acceso a este dispositivo si está conectado por esta red."
-
-msgid "Really reset all changes?"
-msgstr "¿Está seguro de querer reiniciar todos los cambios?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"¿Está seguro de apagar la interfaz \"%s\"?.\n"
-"Puede perder el acceso a este dispositivo si está conectado por interfaz."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"¿Está seguro de querer apagar esta red?.\n"
-"Puede perder el acceso a este dispositivo si está conectado por esta red."
-
-msgid "Really switch protocol?"
-msgstr "¿Está seguro de querer cambiar el protocolo?"
-
-msgid "Realtime Connections"
-msgstr "Conexiones en tiempo real"
-
-msgid "Realtime Graphs"
-msgstr "Gráficas en tiempo real"
-
-msgid "Realtime Load"
-msgstr "Carga en tiempo real"
-
-msgid "Realtime Traffic"
-msgstr "Tráfico en tiempo real"
-
-msgid "Realtime Wireless"
-msgstr "Red inalámbrica en tiempo real"
-
-msgid "Rebind protection"
-msgstr "Protección contra reasociación"
-
-msgid "Reboot"
-msgstr "Rearrancar"
-
-msgid "Rebooting..."
-msgstr "Rearrancando..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Rearranque el sistema operativo de su dispositivo"
-
-msgid "Receive"
-msgstr "Recibir"
-
-msgid "Receiver Antenna"
-msgstr "Antena Receptora"
-
-msgid "Reconnect this interface"
-msgstr "Reconectar esta interfaz"
-
-msgid "Reconnecting interface"
-msgstr "Reconectando la interfaz"
-
-msgid "References"
-msgstr "Referencias"
-
-msgid "Regulatory Domain"
-msgstr "Dominio Regulador"
-
-msgid "Relay"
-msgstr "Relé"
-
-msgid "Relay Bridge"
-msgstr "Puente relé"
-
-msgid "Relay between networks"
-msgstr "Relé entre redes"
-
-msgid "Relay bridge"
-msgstr "Puente relé"
-
-msgid "Remote IPv4 address"
-msgstr "Dirección IPv4 remota"
-
-msgid "Remove"
-msgstr "Desinstalar"
-
-msgid "Repeat scan"
-msgstr "Repetir exploración"
-
-msgid "Replace entry"
-msgstr "Reemplazar entrada"
-
-msgid "Replace wireless configuration"
-msgstr "Cambiar la configuración inalámbrica"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Necesario para ciertos ISPs, por ejemplo Charter con DOCSIS 3"
-
-msgid "Reset"
-msgstr "Reiniciar"
-
-msgid "Reset Counters"
-msgstr "Reiniciar contadores"
-
-msgid "Reset to defaults"
-msgstr "Reiniciar a valores por defecto"
-
-msgid "Resolv and Hosts Files"
-msgstr "Ficheros Resolv y Hosts"
-
-msgid "Resolve file"
-msgstr "Fichero de resolución"
-
-msgid "Restart"
-msgstr "Rearrancar"
-
-msgid "Restart Firewall"
-msgstr "Rearrancar cortafuegos"
-
-msgid "Restore backup"
-msgstr "Restaurar copia de seguridad"
-
-msgid "Reveal/hide password"
-msgstr "Mostrar/ocultar contraseña"
-
-msgid "Revert"
-msgstr "Anular"
-
-msgid "Root"
-msgstr "Raíz"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Directorio raíz para los ficheros servidos por TFTP"
-
-msgid "Router Model"
-msgstr "Modelo de router"
-
-msgid "Router Name"
-msgstr "Nombre del router"
-
-msgid "Router Password"
-msgstr "Contraseña del router"
-
-msgid "Routes"
-msgstr "Rutas"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Las rutas especifican sobre qué interfaz y pasarela se puede llegar a una "
-"cierta máquina o red."
-
-msgid "Rule #"
-msgstr "Nº de regla"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "Comprobar el sistema de ficheros antes de montar el dispositivo"
-
-msgid "Run filesystem check"
-msgstr "Comprobar el sistema de ficheros"
-
-msgid "SSH Access"
-msgstr "Acceso SSH"
-
-msgid "SSH-Keys"
-msgstr "Claves SSH"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Guardar"
-
-msgid "Save & Apply"
-msgstr "Guardar y aplicar"
-
-msgid "Save &#38; Apply"
-msgstr "Guardar y aplicar"
-
-msgid "Scan"
-msgstr "Explorar"
-
-msgid "Scheduled Tasks"
-msgstr "Tareas programadas"
-
-msgid "Section added"
-msgstr "Sección añadida"
-
-msgid "Section removed"
-msgstr "Sección eliminada"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Vea la página del manual de \"mount\" para detalles"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"Enviar peticiones de echo LCP cada intervalo de segundos dado, solo efectivo "
-"usado conjuntamente con el umbral de fallo"
-
-msgid "Send router solicitations"
-msgstr "Enviar solicitudes de router"
-
-msgid "Separate Clients"
-msgstr "Aislar clientes"
-
-msgid "Separate WDS"
-msgstr "WDS aislado"
-
-msgid "Server Settings"
-msgstr "Configuración del servidor"
-
-msgid "Service Name"
-msgstr "Nombre de servicio"
-
-msgid "Service Type"
-msgstr "Tipo de servicio"
-
-msgid "Services"
-msgstr "Servicios"
-
-msgid "Setup DHCP Server"
-msgstr "Configuración del servidor DHCP"
-
-msgid "Setup Time Synchronization"
-msgstr "Sincronización horaria"
-
-msgid "Show current backup file list"
-msgstr "Mostrar lista de ficheros a salvar"
-
-msgid "Shutdown this interface"
-msgstr "Apagar esta interfaz"
-
-msgid "Shutdown this network"
-msgstr "Apagar esta red"
-
-msgid "Signal"
-msgstr "Señal"
-
-msgid "Signal:"
-msgstr "Señal:"
-
-msgid "Size"
-msgstr "Tamaño"
-
-msgid "Skip"
-msgstr "Saltar"
-
-msgid "Skip to content"
-msgstr "Saltar al contenido"
-
-msgid "Skip to navigation"
-msgstr "Saltar a navegación"
-
-msgid "Slot time"
-msgstr "Tiempo asignado"
-
-msgid "Software"
-msgstr "Instalación de programas"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Algunos campos no son válidos, ¡no se pueden guardar!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Objeto no encontrado."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "El servidor encontró un error inesperado."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"No está instalado el soporte para el sysupgrade, la nueva imagen debe "
-"grabarse manualmente. Por favor, mire el wiki de OpenWrt para instrucciones "
-"de instalación específicas."
-
-msgid "Sort"
-msgstr "Ordenar"
-
-msgid "Source"
-msgstr "Origen"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "Especifica el tiempo de prefijo anunciado preferido en segundos"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Especifica el tiempo de prefijo válido preferido en segundos"
-
-msgid "Specifies the button state to handle"
-msgstr "Especifica el estado de botón a manejar"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Especifica el directorio al que está enlazado el dispositivo"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-"Especifica los puertos de escucha de esta instancia de <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Especifica la cantidad de peticiones ARP fallidas hasta suponer muerta una "
-"máquina"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-"Especifica la cantidad de segundos a transcurrir hasta suponer muerta una "
-"máquina"
-
-msgid "Specify the secret encryption key here."
-msgstr "Especifica la clave secreta de encriptado."
-
-msgid "Start"
-msgstr "Arrancar"
-
-msgid "Start priority"
-msgstr "Prioridad de arranque"
-
-msgid "Startup"
-msgstr "Arranque"
-
-msgid "Static IPv4 Routes"
-msgstr "Rutas estáticas IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Rutas estáticas IPv6"
-
-msgid "Static Leases"
-msgstr "Cesiones estáticas"
-
-msgid "Static Routes"
-msgstr "Rutas estáticas"
-
-msgid "Static WDS"
-msgstr "WDS estático"
-
-msgid "Static address"
-msgstr "Dirección estática"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Las cesiones estáticas se usan para asignar direcciones IP fijas y nombres "
-"simbólicos de máquina a clientes DHCP. También son necesarias para "
-"configuraciones de interfaz no dinámica en las que a cada máquina siempre se "
-"le quiere servir la misma dirección IP."
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Stop"
-msgstr "Parar"
-
-msgid "Strict order"
-msgstr "Orden estricto"
-
-msgid "Submit"
-msgstr "Guardar"
-
-msgid "Swap Entry"
-msgstr "Entrada de intercambio"
-
-msgid "Switch"
-msgstr "Switch"
-
-msgid "Switch %q"
-msgstr "Switch %q"
-
-msgid "Switch %q (%s)"
-msgstr "Switch %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Intercambiar protocolo"
-
-msgid "Sync with browser"
-msgstr "Sincronizar con el navegador"
-
-msgid "Synchronizing..."
-msgstr "Sincronizando..."
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "System Log"
-msgstr "Registro del sistema"
-
-msgid "System Properties"
-msgstr "Propiedades del sistema"
-
-msgid "System log buffer size"
-msgstr "Tamaño del buffer de registro del sistema"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Configuración TFTP"
-
-msgid "TFTP server root"
-msgstr "Raíz del servidor TFTP"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "Ratio TX"
-
-msgid "Table"
-msgstr "Tabla"
-
-# Target = Meta --> Objetivo --> Destino?
-msgid "Target"
-msgstr "Objetivo"
-
-msgid "Terminate"
-msgstr "Terminar"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"La sección de <em>Configuración del dispositivo</em> ocupa la configuración "
-"física del hardware de radio como el canal, la potencia de transmisión o la "
-"selección de antena que se comparte entre todas las redes inalámbricas "
-"definidas (si el hardware de radio es capaz de ser multi-SSID). "
-"Configuración por red como encriptado o modo de operación se agrupan en "
-"<em>Configuración del interfaz</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"El paquete <em>libiwinfo-lua</em> no está instalado. ¡Debe instalarlo para "
-"poder configurar la conectividad inalambrica!"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"El prefijo IPv6 asignado por el proveedor, suele termina con <code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Los caracteres permitidos son: <code>A-Z</code>, <code>a-z</code>, "
-"<code>0-9</code> y <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"El archivo de dispositivo de memoria o partición (<abbr title=\"Por ejemplo"
-"\">e.j.</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"El sistema de archivo que fue utilizado para dar formato a la memoria (<abbr "
-"title=\"por ejemplo\">Ej.</abbr> <samp><abbr title=\"Third Extended "
-"Filesystem\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Imagen recibida. Verifique que la comprobación y tamaño del fichero recibido "
-"coinciden con los del original.<br />Pulse \"Proceder\" para empezar el "
-"grabado."
-
-msgid "The following changes have been committed"
-msgstr "Se han hecho los siguientes cambios"
-
-msgid "The following changes have been reverted"
-msgstr "Se han anulado los siguientes cambios"
-
-msgid "The following rules are currently active on this system."
-msgstr "Rutas activas."
-
-msgid "The given network name is not unique"
-msgstr "Nombre de red repetido"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"El hardware no es capaz de multi-SSD y la configuración actual se cambiará "
-"si continúa."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-"Longitud del prefijo IPv4 en bits, el resto se usará en direcciones IPv6."
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "Longitud del prefijo IPv6 en bits"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"Los puertos de red de este dispositivo se pueden combinar en varias <abbr "
-"title=\"Virtual Local Area Network\">VLAN</abbr>s en las que los ordenadores "
-"se pueden comunicar directamente entre ellos. Las <abbr title=\"Virtual "
-"Local Area Network\">VLAN</abbr>s se usan a menudo para separar diferentes "
-"segmentos de red. Es común que exista un puerto por defecto para subida "
-"hacia una red mayor como internet y el resto se dediquen a la red local."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "Este protocolo necesita estar asignado a un dispositivo"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"El sistema está borrando la partición de configuración y rearrancará cuando "
-"termine."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"Escribiendo en la memoria flash.<br />¡NO APAGUE EL DISPOSITIVO!<br /> "
-"Espere unos minutos antes de reconectar. Es posible que tenga que renovar la "
-"conexión de su ordenador para poder acceder de nuevo al dispositivo."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"El archivo con la imagen de firmware subido no tiene un formato adecuado. "
-"Asegúrese de haber elegido la imagen correcta para su plataforma."
-
-msgid "There are no active leases."
-msgstr "Sin cesiones activas."
-
-msgid "There are no pending changes to apply!"
-msgstr "¡No hay cambios pendientes!"
-
-msgid "There are no pending changes to revert!"
-msgstr "¡No hay cambios a anular!"
-
-msgid "There are no pending changes!"
-msgstr "¡Sin cambios pendientes!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"No hay dispositivo asignado aún, por favor enlace un dispositivo de red en "
-"la pestaña \"Configuración física\""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"No hay contraseñas en este router. Por favor, configure una contraseña para "
-"proteger el interfaz web y activar SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr "Dirección IPv4 del relé"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Lista de patrones shell con los ficheros y directorios que se deben incluir "
-"en un sysupgrade. Los ficheros modificados en /etc/config/ y ciertas otras "
-"configuraciones se guardarán automáticamente."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"Esto es el ID de usuario codificado como hexadecimal de 32 bytes, no el "
-"nombre de conexión"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Contenido de /etc/rc.local. Ponga sus propios comandos aquí (antes de 'exit "
-"0') para ejecutarlos al final del proceso de inicio."
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"Esta es la dirección de punto final asignada por el broker del túnel, suele "
-"terminar con <code>:2</code>"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Este es el único servidor <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> en la red de área local"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "Definición de tareas programadas para crontab."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-"Esta es normalmente la dirección del PoP más cercano operada por el broker "
-"del túnel"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr "Procesos de sistema que se están ejecutando actualmente y su estado."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "Configuración de acciones personalizadas para los botones"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "Conexiones de red activas."
-
-msgid "This section contains no values yet"
-msgstr "No hay reglas definidas"
-
-msgid "Time Synchronization"
-msgstr "Sincronización horaria"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "Sincronización horaria no configurada."
-
-msgid "Timezone"
-msgstr "Zona horaria"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Para restaurar los ficheros de configuración, debe subir primero una copia "
-"de seguridad."
-
-msgid "Total Available"
-msgstr "Total disponible"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "Tráfico"
-
-msgid "Transfer"
-msgstr "Transferencia"
-
-msgid "Transmission Rate"
-msgstr "Tasa de Transmisión"
-
-msgid "Transmit"
-msgstr "Transmitir"
-
-msgid "Transmit Power"
-msgstr "Potencia de transmisión"
-
-msgid "Transmitter Antenna"
-msgstr "Antena Transmisora"
-
-msgid "Trigger"
-msgstr "Disparador"
-
-msgid "Trigger Mode"
-msgstr "Modo de disparador"
-
-msgid "Tunnel ID"
-msgstr "ID de túnel"
-
-msgid "Tunnel Interface"
-msgstr "Interfaz de túnel"
-
-msgid "Turbo Mode"
-msgstr "Modo Turbo"
-
-msgid "Tx-Power"
-msgstr "Potencia-TX"
-
-msgid "Type"
-msgstr "Tipo"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "Sólo UMTS"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "Dispositivo USB"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Imposible repartir"
-
-msgid "Unknown"
-msgstr "Desconocido"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Error desconocido, ¡no se ha cambiado la contraseña!"
-
-msgid "Unmanaged"
-msgstr "No gestionado"
-
-msgid "Unsaved Changes"
-msgstr "Cambios no guardados"
-
-msgid "Unsupported protocol type."
-msgstr "Tipo de protocolo no soportado."
-
-msgid "Update lists"
-msgstr "Actualizar listas"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Suba una imagen compatible con sysupgrade para reemplazar el firmware "
-"actual. Puede marcar \"Conservar la configuración\" si lo desea (es "
-"necesario que la imagen de OpenWrt sea compatible)."
-
-msgid "Upload archive..."
-msgstr "Subir archivo..."
-
-msgid "Uploaded File"
-msgstr "Archivo subido"
-
-msgid "Uptime"
-msgstr "Tiempo activo"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Usar <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Usar pasarela DHCP"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Utiliza servidores DNS anunciados por otros"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Usa códigos de país ISO/IEC 3166 alpha2."
-
-msgid "Use MTU on tunnel interface"
-msgstr "MTU a usar en el interfaz de túnel"
-
-msgid "Use TTL on tunnel interface"
-msgstr "TTL a usar en el interfaz de túnel"
-
-msgid "Use as root filesystem"
-msgstr "Usar como raíz del sistema de ficheros"
-
-msgid "Use broadcast flag"
-msgstr "Usar marca de propagación"
-
-msgid "Use custom DNS servers"
-msgstr "Usar servidores DNS personalizados"
-
-msgid "Use default gateway"
-msgstr "Usar pasarela por defecto"
-
-msgid "Use gateway metric"
-msgstr "Usar métrica de la pasarela"
-
-msgid "Use preferred lifetime"
-msgstr "Usar tiempo de vida preferido"
-
-msgid "Use routing table"
-msgstr "Usar tabla de rutas"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Pulse el botón <em>Añadir</em> para insertar una nueva cesión. <em>Dirección "
-"MAC</em> identificará la máquina, <em>dirección IPv4</em> especificará la "
-"dirección fija a usar y <em>Nombre de máquina</em> se asignará como nombre "
-"simbólico."
-
-msgid "Use valid lifetime"
-msgstr "Usar tiempo de vida válido"
-
-msgid "Used"
-msgstr "Usado"
-
-msgid "Used Key Slot"
-msgstr "Espacio de clave usado"
-
-msgid "Username"
-msgstr "Nombre de usuario"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Interfaz VLAN"
-
-msgid "VLANs on %q"
-msgstr "VLANs en %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLANs en %q (%s)"
-
-msgid "VPN Server"
-msgstr "Servidor VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "Clase de vendedor a enviar cuando solicite DHCP"
-
-msgid "Verify"
-msgstr "Verificar"
-
-msgid "Version"
-msgstr "Versión"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "Sistema abierto WEP"
-
-msgid "WEP Shared Key"
-msgstr "Clave compartida WEP"
-
-msgid "WEP passphrase"
-msgstr "Frase de paso WEP"
-
-msgid "WMM Mode"
-msgstr "Modo WMM"
-
-msgid "WPA passphrase"
-msgstr "Frase de paso WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA-Encryption necesita que estén instalados wpa_supplicant (para el modo "
-"cliente o hostapd (para los modos AP y ad-hoc)."
-
-msgid "Waiting for changes to be applied..."
-msgstr "Esperando a que se realicen los cambios..."
-
-msgid "Waiting for command to complete..."
-msgstr "Esperando a que termine el comando..."
-
-msgid "Warning"
-msgstr "Aviso"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Advertencia: Hay cambios realizados que no han sido guardados, los mismos se "
-"perderán mientras se rearranca!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr "Red inalámbrica"
-
-msgid "Wireless Adapter"
-msgstr "Adaptador inalámbrico"
-
-msgid "Wireless Network"
-msgstr "Red inalámbrica"
-
-msgid "Wireless Overview"
-msgstr "Redes inalámbricas"
-
-msgid "Wireless Security"
-msgstr "Seguridad inalámbrica"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Red inalámbrica desconectada o no asociada"
-
-msgid "Wireless is restarting..."
-msgstr "Rearrancando red inalámbrica..."
-
-msgid "Wireless network is disabled"
-msgstr "Red inalámbrica desconectada"
-
-msgid "Wireless network is enabled"
-msgstr "Red inalámbrica conectada"
-
-msgid "Wireless restarted"
-msgstr "Red inalámbrica rearrancada"
-
-msgid "Wireless shut down"
-msgstr "Apagando red inalámbrica"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Escribir las peticiones de DNS recibidas en el registro del sistema"
-
-msgid "XR Support"
-msgstr "Soporte de XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Gestione los scripts de inicio. Los cambios serán aplicados tras reiniciar "
-"el equipo.<br /><strong>ADVERTENCIA: ¡Si desactiva scripts de inicio "
-"esenciales como\"network\", su equipo puede no arrancar o quedar "
-"inaccesible!.</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Debe activar Javascript en su navegador o LuCI no funcionará correctamente."
-
-msgid "any"
-msgstr "cualquiera"
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "puenteado"
-
-msgid "create:"
-msgstr "crear:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "crea un puente sobre la interfaz o interfaces asociadas"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "desabilitar"
-
-msgid "expired"
-msgstr "expirado"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"archivo en el que se guardarán las direcciones <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr> cedidas"
-
-msgid "forward"
-msgstr "retransmisión"
-
-msgid "full-duplex"
-msgstr "full dúplex"
-
-msgid "half-duplex"
-msgstr "half dúplex"
-
-msgid "help"
-msgstr "ayuda"
-
-msgid "hidden"
-msgstr "oculto"
-
-msgid "if target is a network"
-msgstr "si el destino es una red"
-
-msgid "input"
-msgstr "entrada"
-
-msgid "kB"
-msgstr "KB"
-
-msgid "kB/s"
-msgstr "KB/s"
-
-msgid "kbit/s"
-msgstr "Kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "Archvo <abbr title=\"Domain Name System\">DNS</abbr> local"
-
-msgid "no"
-msgstr "no"
-
-msgid "no link"
-msgstr "sin enlace"
-
-msgid "none"
-msgstr "ninguno"
-
-msgid "off"
-msgstr "parado"
-
-msgid "on"
-msgstr "activo"
-
-msgid "open"
-msgstr "abierto"
-
-msgid "routed"
-msgstr "enrutado"
-
-msgid "tagged"
-msgstr "marcado"
-
-msgid "unknown"
-msgstr "desconocido"
-
-msgid "unlimited"
-msgstr "ilimitado"
-
-msgid "unspecified"
-msgstr "no especificado"
-
-msgid "unspecified -or- create:"
-msgstr "no especificado -o- crear:"
-
-msgid "untagged"
-msgstr "desmarcado"
-
-msgid "yes"
-msgstr "sí"
-
-msgid "« Back"
-msgstr "« Volver"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Esperando al router..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Activar el servidor integrado NTP"
-
-#~ msgid "Active Leases"
-#~ msgstr "Cesiones activas"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Bitrate"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Configuración / Aplicar"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Configuración / Cambios"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Configuración / Anular"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "Encriptado"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "Explorar-<abbr title=\"Wireless Local Area Network\">WLAN</abbr>"
-
-#~ msgid "Create Network"
-#~ msgstr "Crear red"
-
-#~ msgid "Link"
-#~ msgstr "Enlace"
-
-#~ msgid "Networks"
-#~ msgstr "Redes"
-
-#~ msgid "Power"
-#~ msgstr "Potencia"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Redes inalámbricas en un entorno local"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "Notación-<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>: "
-#~ "dirección/prefijo"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "Servidor <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "Difusión-<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Dirección <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "Alias IP"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Configuración IPv6"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Los puertos de red de su router pueden ser combinados en diferentes <abbr "
-#~ "title=\"Virtual Local Area Network\">VLAN</abbr>s donde las computadoras "
-#~ "pueden comunicarse directamente con otras. Las <abbr title=\"Virtual "
-#~ "Local Area Network\">VLAN</abbr>s a menu son usadas para separar "
-#~ "diferentes segmentos de red. Además, usualmente hay un puerto de enlace "
-#~ "de subida (Uplink) para conectar a una red mas grande, por ejemplo "
-#~ "Internet y otro(s) puerto(s) para el acceso a la red local."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Activar buffering"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6-sobre-IPv4"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Archivos protegidos al instalar un nuevo firmware"
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Aquí puede personalizar las configuraciones y funcionalidad de <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Acciones luego de \"Post-commit\""
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Estos comandos se ejecutan automáticamente cuando una determinada "
-#~ "configuración de la <abbr title=\"Unified configuración Interface\"> UCI "
-#~ "</abbr> es aplicada permitiendo que los cambios sean efectivos "
-#~ "inmediatamente."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "<abbr title=\"User Interface\">Interfaz de Usuario</abbr> Web"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "Servidor <abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Punto de acceso (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Opciones adicional de pppd"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Desconectar automáticamente"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Archivo de copia de seguridad"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configurar el servidor DNS local para usar servidores de nombre sugeridos "
-#~ "por el par PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Script de conexión"
-
-#~ msgid "Create backup"
-#~ msgstr "Crear copia de respaldo"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Script de desconexión"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Editar listas de paquetes de instalación y los objetivos "
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Ativar IPv6 sobre enlace PPP"
-
-#~ msgid "Firmware image"
-#~ msgstr "Imágen del firmware"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Aquí puede realizar una copia de respaldo o bien restaurar la "
-#~ "configuración de su ruter y, si es posible, reiniciar el ruter a su "
-#~ "configuración de fábrica."
-
-#~ msgid "Installation targets"
-#~ msgstr "Destinos de instalación"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Mantener archivos de configuración"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Mantener conectada"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Permite que pppd reemplace la ruta por defecto actual para usar la "
-#~ "interfaz ppp como ruta por defecto luego de una conexión satisfactoria"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr ""
-#~ "Permite a pppd ejecutar este script luego de establecer un enlace PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Permite a pppd ejecutar este script antes de terminar el enlace PPP"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Asegurese de escribir correctamente el código pin aquí caso contrario "
-#~ "bloqueará su tarjeta sim!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "La mayoría de ellos son servidores de red, que ofrezcen un determinado "
-#~ "servicio para el dispositivo o la red como el acceso shell, servicio de "
-#~ "páginas web como <abbr title=\"Lua configuración Interface\"> LuCI </"
-#~ "abbr>, haciendo mesh-routing, el envío de mensajes de correo "
-#~ "electrónico, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Número de tests de conexión fallida para iniciar la reconexión automática"
-
-#~ msgid "PIN code"
-#~ msgstr "Código PIN"
-
-#~ msgid "Package lists"
-#~ msgstr "Listas de paquetes"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Proceder a configurar su router a los valores de fábrica?"
-
-#~ msgid "Processor"
-#~ msgstr "Procesador"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Puerto servidor Radius"
-
-#, fuzzy
-#~ msgid "Radius-Server"
-#~ msgstr "Servidor Radius"
-
-#~ msgid "Replace default route"
-#~ msgstr "Reemplazar la ruta por defecto"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Reiniciar router a su configuración de fábrica"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "Segundos a esperar al modem antes iniciar el intento de conexión"
-
-#~ msgid "Service type"
-#~ msgstr "Tipo de servicio"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Los servicios y demonios ejecutan ciertas tareas en su dispositivo."
-
-#~ msgid "Settings"
-#~ msgstr "Configuraciones"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Configurar tiempo de espera"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Lo lamento. OpenWrt y derivados no permite la actualización de esta "
-#~ "plataforma. <br /> Para poder flashear este dispositivo deberá hacerlo en "
-#~ "forma manual."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr ""
-#~ "Especifique aquí argumentos adicionales para la línea de comando de pppd"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "El nodo de dispositivo de su modem, ej. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr ""
-#~ "Tiempo (en segundos) luego de que una conexión no usada será cerrada"
-
-#~ msgid "Update package lists"
-#~ msgstr "Acutlizar listas de paquetes"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr ""
-#~ "Subir un archivo de imágen de OpenWrt o derivado para re-flashear el "
-#~ "dispositivo."
-
-#~ msgid "Upload image"
-#~ msgstr "Subir imágen"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Uso de pares de DNS "
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Es necesario instalar &amp;quot;comgt&amp;quot; para UMTS/GPRS, &amp;quot;"
-#~ "ppp-mod-pppoe&amp;quot; para PPPoE, &amp;quot;ppp-mod-pppoa&amp;quot; "
-#~ "para PPPoA o &amp;quot;pptp&amp;quot; para porte PPtP"
-
-#~ msgid "back"
-#~ msgstr "volver"
-
-#~ msgid "buffered"
-#~ msgstr "buffered"
-
-#~ msgid "cached"
-#~ msgstr "en caché "
-
-#~ msgid "free"
-#~ msgstr "libre"
-
-#~ msgid "static"
-#~ msgstr "estático"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> es una colección "
-#~ "libre de software Lua incluyendo un <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework y una interfaz web para dispositivos embebidos."
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> se encuentra "
-#~ "licenciado bajo la licencia Apache (Apache-License)."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Un servidor web HTTP/1.1 liviano escrito en C y Lua, diseñado para servir "
-#~ "LUCI "
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Un pequeño servidor web que puede ser usado para servir <abbr title=\"Lua "
-#~ "configuración Interface\"> LuCI </abbr>. "
-
-#~ msgid "About"
-#~ msgstr "Acerca de"
-
-#~ msgid "Addresses"
-#~ msgstr "Direcciones"
-
-#~ msgid "Admin Password"
-#~ msgstr "Contraseña de Admin"
-
-#~ msgid "Alias"
-#~ msgstr "Alias"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Autenticación Realm"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Puerto del puente"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Cambiar la clave del administrador del sistema (Usuario <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Cliente + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Fichero configuración"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Tiempo de conexión agotado"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Desarrolladores que contribuyen"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP asignado"
-
-#~ msgid "Document root"
-#~ msgstr "Raíz de documentos"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Habilitar Keep-Alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Puente ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Aquí puede pegar las claves públicas de <abbr title=\"Secure Shell\">SSH</"
-#~ "abbr> (una por línea) para la autenticación de claves públicas de <abbr "
-#~ "title=\"Secure Shell\">SSH</abbr>."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Configuración IP"
-
-#~ msgid "Interface Status"
-#~ msgstr "Interfaz de Estado "
-
-#~ msgid "Lead Development"
-#~ msgstr "Lider del desarrollo"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "No configurado"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Contraseña cambiada satisfactoriamente"
-
-#~ msgid "Plugin path"
-#~ msgstr "Ruta del plugin"
-
-#~ msgid "Ports"
-#~ msgstr "Puertos"
-
-#~ msgid "Primary"
-#~ msgstr "Primario"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Página del proyecto "
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-# Thanks to --> Gracias a -> Agradecemientos --> Agregadecemos a
-#~ msgid "Thanks To"
-#~ msgstr "Agregadecemos a"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "El nombre Realm el cual será mostrado en el símbolo de autenticación para "
-#~ "páginas protegidas. "
-
-#~ msgid "Unknown Error"
-#~ msgstr "Error desconocido"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "por defecto a <code>/etc/httpd.conf</code>"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Listas de paquetes actualizada"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Actualizar los paquetes instalados"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "También los archivos de registro del núcleo (kernel) o servicio se pueden "
-#~ "ver aquí para obtener una visión general sobre su estado actual."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Aquí pude encontrar información acerca del estado actual del sistema como "
-#~ "la frecuencia del reloj de la <abbr title=\"Central Processing Unit"
-#~ "\">CPU</abbr> clock frequency, uso de la memoria o datos de la interfaz "
-#~ "de red."
-
-#~ msgid "Search file..."
-#~ msgstr "Buscar archivo..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> interfaz gráfica "
-#~ "libre, flexible y amigable para configurar la distro OpenWrt (Kamikaze) y "
-#~ "derivados."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "Y ahora disfrute su router!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Como siempre queremos mejorar esta interfaz estamos esperando con interés "
-#~ "sus comentarios y sugerencias. "
-
-#~ msgid "Hello!"
-#~ msgstr "Hola !"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Aviso: En <abbr title=\"Lua Configuration Interface\">LuCI</abbr> los "
-#~ "cambios deben ser confirmados haciendo clic en \"Cambios\" y luego en "
-#~ "\"Guardar &amp; aplicar\" para que los cambios sean efectivos."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "En las páginas siguientes puede realizar todos los ajustes importantes de "
-#~ "su router."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "El grupo de <abbr title=\"Lua Configuration Interface\">LuCI</abbr>"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Éste es el área de administración de <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Interfaz de usuario"
-
-#~ msgid "enable"
-#~ msgstr "habilitar"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr ""
-#~ "<span class=\"translation-space\"> </span>\r\n"
-#~ "(opcional)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "Puerto <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "El Servidor <abbr title=\"Domain Name System\">DNS</abbr> serán "
-#~ "consultados de acuerdo al orden explicitado en el archivo \"resolv\""
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "Tamaño <abbr title=\"máximo\">máx.</abbr> de paquete <abbr title="
-#~ "\"Extension Mechanisms for Domain Name System\">EDNS0</abbr>"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "Aislamiento AP"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Añadir una red WiFi a la red física"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Tamaño del segmento de la abrazadera"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Crear red"
-
-#~ msgid "Devices"
-#~ msgstr "Dispositivos"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Hacer búqueda inversa para redes locales"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Activar Servidor TFTP"
-
-#~ msgid "Errors"
-#~ msgstr "Errores"
-
-#~ msgid "Essentials"
-#~ msgstr "Esencial"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Expandir hosts"
-
-#~ msgid "First leased address"
-#~ msgstr "Primer dirección otorgada"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Correge problemas con los sitios web inaccesibles, envío de formularios o "
-#~ "una conducta inesperada para algunos proveedores de servicios de Internet."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Dirección de Hardware"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Aquí puede configurar los dispositivos Wi-Fi instalados."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignorar <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Independiente (ad hoc) "
-
-#~ msgid "Internet Connection"
-#~ msgstr "Conexión a Internet "
-
-#~ msgid "Join (Client)"
-#~ msgstr "Únete (Cliente) "
-
-#~ msgid "Leases"
-#~ msgstr "Brindadas"
-
-#~ msgid "Local Domain"
-#~ msgstr "Dominio local"
-
-#~ msgid "Local Network"
-#~ msgstr "Red local"
-
-#~ msgid "Local Server"
-#~ msgstr "Servidor local"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Imágen de inicio en red"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Nombre de la red (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Número de direcciones otorogada"
-
-#~ msgid "Path"
-#~ msgstr "Ruta (path)"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Ejectuar acciones"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Impide la comunicación de cliente a cliente "
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Proporcionar (Punto de Acceso) "
-
-#~ msgid "Resolvfile"
-#~ msgstr "Archivo \"resolv\""
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Raíz del Servidor TFTP"
-
-#~ msgid "TX / RX"
-#~ msgstr "Tx / Rx"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Los siguientes cambios se han aplicado"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Cuando un nuevo firmware ha sido instalado con <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr> estos archivos serán agregados a la "
-#~ "nueva instalación automáticamente."
-
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "Inalámbrico"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Con <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "miembros de la red pueden automáticamente recibir su configuración (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, máscara de red, servidor "
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Puede correr varias redes Wi-Fi con un solo dispositivo. Tenga en cuenta "
-#~ "que hay restricciones que se aplican al propio hardware y al driver "
-#~ "específicamente. Normalmente puede operar 1 red Ad-Hoc o hasta 3 modo "
-#~ "Master y un Cliente de forma simultanea."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Es necesario instalar &amp;quot;ppp-mod-pppoe&amp;quot; para PPPoE o &amp;"
-#~ "quot;pptp&amp;quot; para PPtP support"
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#~ msgid "additional hostfile"
-#~ msgstr "archivo de host adicional"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "añadir nombre de dominios a entradas de host en el archivo resolv"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "estático"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "reconectar automáticamente"
-
-#~ msgid "concurrent queries"
-#~ msgstr "consultas simultaneas"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "desactivar <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr> para esta interfaz"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "desconecte cuando esté inactivo durante "
-
-#~ msgid "don't cache unknown"
-#~ msgstr "do cachear desconocido"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-
-#~ msgid "installed"
-#~ msgstr "instalado"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "Localización de nombre de host dependiendo de su subred"
-
-#~ msgid "not installed"
-#~ msgstr "no instalado"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "impedir cacheo de respuestas negativas de <abbr title=\"Domain Name System"
-#~ "\">DNS</abbr>"
-
-#~ msgid "query port"
-#~ msgstr "puerto de consulta"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmitido / recibido"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "redes contenidas"
-
-#~ msgid "all"
-#~ msgstr "todo"
-
-#~ msgid "Code"
-#~ msgstr "Código"
-
-#~ msgid "Distance"
-#~ msgstr "Distancia"
-
-#~ msgid "Legend"
-#~ msgstr "Leyenda"
-
-#~ msgid "Library"
-#~ msgstr "Biblioteca"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "ver las páginas de man de &amp;#39;%s&amp;#39;"
-
-#~ msgid "Package Manager"
-#~ msgstr "Gestor de Paquetes"
-
-#~ msgid "Service"
-#~ msgstr "Servicio"
-
-#~ msgid "Statistics"
-#~ msgstr "Estadísticas"
-
-#~ msgid "zone"
-#~ msgstr "Zona"
diff --git a/po/es/commands.po b/po/es/commands.po
deleted file mode 100644
index 8052452..0000000
--- a/po/es/commands.po
+++ /dev/null
@@ -1,97 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-24 10:16+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr "Descripción breve del comando a configurar"
-
-msgid "Access command with"
-msgstr "Acceder al comando con"
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-"Permitir ejecutar el comando y descargar su salida sin más autentificación"
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr "Permitir al usuario añadir parámetros de línea de comandos"
-
-msgid "Arguments:"
-msgstr "Parámetros:"
-
-msgid "Binary data not displayed, download instead."
-msgstr "No se pueden mostrar datos binarios, descárguelos."
-
-msgid "Code:"
-msgstr "Código:"
-
-msgid "Collecting data..."
-msgstr "Recuperando datos..."
-
-msgid "Command"
-msgstr "Comando"
-
-msgid "Command failed"
-msgstr "Falló"
-
-msgid "Command line to execute"
-msgstr "Comando a ejecutar"
-
-msgid "Command successful"
-msgstr "OK"
-
-msgid "Command:"
-msgstr "Comando:"
-
-msgid "Configure"
-msgstr "Configurar"
-
-msgid "Custom Commands"
-msgstr "Comandos propios"
-
-msgid "Custom arguments"
-msgstr "Parámetros propios"
-
-msgid "Dashboard"
-msgstr "Panel"
-
-msgid "Description"
-msgstr "Descripción"
-
-msgid "Download"
-msgstr "Descarga"
-
-msgid "Failed to execute command!"
-msgstr "¡Error al ejecutar el comando!"
-
-msgid "Link"
-msgstr "Enlace"
-
-msgid "Loading"
-msgstr "Cargando"
-
-msgid "Public access"
-msgstr "Acceso público"
-
-msgid "Run"
-msgstr "Ejecutar"
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-"Aquí puede configurar sus propios comandos shell para lanzarlos fácilmente "
-"desde el interfaz web."
-
-msgid "Waiting for command to complete..."
-msgstr "Esperando a que termine el comando..."
diff --git a/po/es/coovachilli.po b/po/es/coovachilli.po
deleted file mode 100644
index 886da59..0000000
--- a/po/es/coovachilli.po
+++ /dev/null
@@ -1,113 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-07-28 23:18+0200\n"
-"Last-Translator: Daniel <danips@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Configuración de Red"
-
-msgid "RADIUS configuration"
-msgstr "Configuración RADIUS"
-
-msgid "UAM and MAC Authentication"
-msgstr "Autenticación UAM y MAC"
-
-#~ msgid "General configuration"
-#~ msgstr "Configuración General"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Configuración General de CoovaChilli"
-
-#~ msgid "Command socket"
-#~ msgstr "Socket de Comando"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "SocketUNIX utilizado para comunicación con chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Configuración del intervalo de refresco "
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Vuelve a leer el fichero de configuracion y las consultas DNS cada "
-#~ "intervalo de segundos. Eso tiene el mismo efecto que enviar la señal HUP. "
-#~ "Si el intervalo es 0 (cero) se inhabilita la función."
-
-#~ msgid "Pid file"
-#~ msgstr "Fichero Pid"
-
-#~ msgid "Filename to put the process id"
-#~ msgstr "Nombre de archivo donde poner el ID del proceso"
-
-#~ msgid "State directory"
-#~ msgstr "Directorio de estado"
-
-#~ msgid "Directory of non-volatile data"
-#~ msgstr "Directorio de datos no volátiles"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "Configuración TUN / TAP"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Configuración de Red / Tun"
-
-#~ msgid ""
-#~ "Script executed after a session has moved from authorized state to "
-#~ "unauthorized"
-#~ msgstr ""
-#~ "Script ejecutado cuando el estado de una sesión es alterado de autorizado "
-#~ "a no autorizado"
-
-#~ msgid "Network up script"
-#~ msgstr "Script de subida de red"
-
-#~ msgid "Script executed after the tun network interface has been brought up"
-#~ msgstr ""
-#~ "Script ejecutado después de que la interfaz de red tun haya sido "
-#~ "levantado."
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Servidor DNS primario"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Servidor DNS secundario"
-
-#~ msgid "Domain name"
-#~ msgstr "Nombre de dominio"
-
-#~ msgid ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-#~ msgstr ""
-#~ "Se utiliza para informar al cliente sobre el nombre de dominio a utilizar "
-#~ "para las consultas DNS"
-
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Conjunto de direcciones IP Dinámicas"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Especifica un conjunto de direcciones IP Dinámicas"
-
-#~ msgid "IP down script"
-#~ msgstr "Scripts de bajada IP"
-
-#~ msgid "Script executed after the tun network interface has been taken down"
-#~ msgstr "Script ejecutado después de que la red de interfaz tun sea bajado"
-
-#~ msgid "IP up script"
-#~ msgstr "Script de subida IP"
diff --git a/po/es/ddns.po b/po/es/ddns.po
deleted file mode 100644
index c77f8b1..0000000
--- a/po/es/ddns.po
+++ /dev/null
@@ -1,89 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-11-01 23:37+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "Verificar cambios de IP cada"
-
-msgid "Check-time unit"
-msgstr "Unidad de tiempo"
-
-msgid "Custom update-URL"
-msgstr "URL de actualización personalizada"
-
-msgid "Dynamic DNS"
-msgstr "DNS dinámico"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"DNS Dinámico le permite conectar a su router con un nombre concreto aunque "
-"su dirección IP cambie dinámicamente."
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Event interface"
-msgstr "Interfaz de eventos"
-
-msgid "Force update every"
-msgstr "Forzar actualización cada"
-
-msgid "Force-time unit"
-msgstr "Unidad de tiempo"
-
-msgid "Hostname"
-msgstr "Nombre de máquina"
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid "Network"
-msgstr "Red"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "Tras qué interfaz debe arrancar ddns."
-
-msgid "Password"
-msgstr "Contraseña"
-
-msgid "Service"
-msgstr "Servicio"
-
-msgid "Source of IP address"
-msgstr "Dirección IP de origen"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Nombre de usuario"
-
-msgid "custom"
-msgstr "personalizado"
-
-# Hours
-msgid "h"
-msgstr "h"
-
-msgid "interface"
-msgstr "interfaz"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
-
-msgid "network"
-msgstr "red"
diff --git a/po/es/diag_core.po b/po/es/diag_core.po
deleted file mode 100644
index 8b9b3b5..0000000
--- a/po/es/diag_core.po
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-07-28 23:25+0200\n"
-"Last-Translator: Daniel <danips@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr "Configurar diagnósticos"
-
-msgid "Diagnostics"
-msgstr "Diagnósticos"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Los diagnósticos disponibles bajo este menú dependen de qué módulos haya "
-"instalado en su dispositivo."
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Este menú le permite realizar test de prueba de su sistema para ayudar en la "
-"resolución de problemas."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"En este menú puede configurar diagnósticos de red como el escaneo de equipos "
-"en red o pings."
-
-#~ msgid "l_d_diag"
-#~ msgstr "Diagnośticos"
diff --git a/po/es/diag_devinfo.po b/po/es/diag_devinfo.po
deleted file mode 100644
index 0b44ff3..0000000
--- a/po/es/diag_devinfo.po
+++ /dev/null
@@ -1,222 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-26 20:14+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Actions"
-msgstr "Acciones"
-
-msgid "Add"
-msgstr "Añadir"
-
-msgid "Beginning of MAC address range"
-msgstr "Inicio del rango de direcciones MAC"
-
-msgid "Config Phone Scan"
-msgstr "Configurar escaneo de teléfono"
-
-msgid "Configure"
-msgstr "Configurar"
-
-msgid "Configure Scans"
-msgstr "Explorar configuraciones"
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-"Configure la exploración de dispositivos en las redes especificadas. "
-"Reduciendo \"Espera\", \"Repeticiones\" y/o \"Parar entre peticiones\" puede "
-"acelerar las exploración, pero también puede que no encuentre algunos "
-"dispositivos."
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-"Configure la exploración de dispositivos SIP soportados en las redes "
-"especificadas. Reduciendo \"Espera\", \"Repeticiones\" y/o \"Parar entre "
-"peticiones\" puede acelerar la exploración, pero también puede que no "
-"encuentre algunos dispositivos."
-
-msgid "Delete"
-msgstr "Borrar"
-
-msgid "Device Scan Config"
-msgstr "Configuración del escaneo de dispositivos"
-
-msgid "Device Type"
-msgstr "Tipo de dispositivo"
-
-msgid "Devices discovered for"
-msgstr "Dispositivos encontrados para"
-
-msgid "Devices on Network"
-msgstr "Dispositivos en red"
-
-msgid "Edit"
-msgstr "Editar"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "End of MAC address range"
-msgstr "Fin del rango de direcciones MAC"
-
-msgid "Go to relevant configuration page"
-msgstr "Ir a la página de configuración pertinente"
-
-msgid "IP Address"
-msgstr "Dirección IP"
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid "Invalid"
-msgstr "No válido"
-
-msgid "Link to Device"
-msgstr "Enlazar con dispositivo"
-
-msgid "MAC Address"
-msgstr "Dirección MAC"
-
-msgid "MAC Device Info Overrides"
-msgstr "Ignorar la información del dispositivo MAC"
-
-msgid "MAC Device Override"
-msgstr "Ignorar MAC del dispositivo"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"Dirección MAC e información usada para ignorar el sistema y bases de datos "
-"IEEE"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Milisegundos a detenerse entre peticiones (100 por defecto)"
-
-msgid "Model"
-msgstr "Modelo"
-
-msgid "Name"
-msgstr "Nombre"
-
-msgid "Network Device Scan"
-msgstr "Exploración de dispositivos de red"
-
-msgid "Network Device Scanning Configuration"
-msgstr "Configuración de la exploración de dispositivos de red"
-
-msgid "Networks to scan for devices"
-msgstr "Redes en las que escanear dispositivos"
-
-msgid "Networks to scan for supported devices"
-msgstr "Redes en las que escanear dispositivos soportados"
-
-msgid "No SIP devices"
-msgstr "No hay dispositivos SIP"
-
-msgid "No devices detected"
-msgstr "No se detectan dispositivos"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Número de veces que se enviarán peticiones (1 por defecto)"
-
-msgid "OUI Owner"
-msgstr "Propietario del OUI"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Ignorar la información devuelta por el script de información MAC a "
-"dispositivo (mac-to-devinfo) para el rango de direcciones MAC que se "
-"especifica"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr "Realizar exploraciones (puede llevar unos minutos)"
-
-msgid "Phone Information"
-msgstr "Información de teléfono"
-
-msgid "Phone Scan"
-msgstr "Escanear teléfono"
-
-msgid "Phone Scanning Configuration"
-msgstr "Configuración del escaneo telefónico"
-
-msgid "Phones"
-msgstr "Teléfonos"
-
-msgid "Ports"
-msgstr "Puertos"
-
-msgid "Raw"
-msgstr "Sin tratar"
-
-msgid "Repeat Count"
-msgstr "Número de repeticiones"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr "Repetir exploraciones (puede llevar unos minutos)"
-
-msgid "SIP Device Information"
-msgstr "Información de dispositivos SIP"
-
-msgid "SIP Device Scan"
-msgstr "Escanear dispositivos SIP"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Configuración de escaneo de dispositivos SIP"
-
-msgid "SIP Devices on Network"
-msgstr "Dispositivos SIP en red"
-
-msgid "SIP devices discovered for"
-msgstr "Dispositivos SIP para los que descubrir"
-
-msgid "Scan for devices on specified networks."
-msgstr "Buscar dispositivos en las redes especificadas."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr "Explorar dispositivos SIP soportados en las redes especificadas."
-
-msgid "Scanning Configuration"
-msgstr "Configuración de la exploración"
-
-msgid "Scans for devices on specified networks."
-msgstr "Explora dispositivos en las redes especificadas."
-
-msgid "Sleep Between Requests"
-msgstr "Detenerse entre peticiones"
-
-msgid "Subnet"
-msgstr "Subred"
-
-msgid "This section contains no values yet"
-msgstr "Esta sección aún no tiene valores"
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Esperar de respuestas en segundos (10 por defecto)"
-
-msgid "Timeout"
-msgstr "Espera"
-
-msgid "Use Configuration"
-msgstr "Use la configuración"
-
-msgid "Vendor"
-msgstr "Vendedor"
-
-msgid "check other networks"
-msgstr "comprueba otras redes"
diff --git a/po/es/ffwizard.po b/po/es/ffwizard.po
deleted file mode 100644
index 5d86dfc..0000000
--- a/po/es/ffwizard.po
+++ /dev/null
@@ -1,172 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-15 21:47+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-"Permitir la transferencia de información estadística anónima sobre este nodo"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr "Proteger su LAN de otros nodos o clientes"
-
-msgid "Configure network"
-msgstr "Configurar red"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr "Conecte su nodo con otros vía un túnel por internet."
-
-msgid "DHCP IP range"
-msgstr "Rango de IPs de DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP asignará automáticamente direcciones IP a los clientes"
-
-msgid "DNS Server"
-msgstr "Servidor DNS"
-
-msgid "Enable DHCP"
-msgstr "Habilitar DHCP"
-
-msgid "Gateway"
-msgstr "Pasarela"
-
-msgid "Heartbeat"
-msgstr "Pulso"
-
-msgid "IP address"
-msgstr "Dirección IP"
-
-msgid "L2gvpn tunnel"
-msgstr "Túnel L2gvpn"
-
-msgid "Limit download bandwidth"
-msgstr "Límite de velocidad de descarga"
-
-msgid "Limit upload bandwidth"
-msgstr "Límite de velocidad de subida"
-
-msgid "Mesh IP address"
-msgstr "Dirección IP del mesh"
-
-msgid "Mesh IPv6 Address"
-msgstr "Dirección IPv6 del mesh"
-
-msgid "Netmask"
-msgstr "Máscara de red"
-
-msgid "Password"
-msgstr "Contraseña"
-
-msgid "Password confirmation"
-msgstr "Confirmación de contraseña"
-
-msgid "Password successfully changed"
-msgstr "Contraseña cambiada"
-
-msgid "Protect LAN"
-msgstr "Protege la LAN"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Configurar sus interfaces de red."
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr "Permitir a otros usar su conexión para acceder a internet."
-
-msgid "Share your internet connection"
-msgstr "Comparta su dirección de internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Rango IP de direcciones que se reparten a los clientes (ej. 10.1.2.1/28). Si "
-"el rango está dentro de su red mesh, se declarará como HNA. Cualquier otro "
-"rango usará NAT. Si se deja vacío se usarán los valores por defectos del "
-"perfil comunitario."
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "La dirección IPv6 se calcula automáticamente."
-
-msgid "The protocol to use for internet connectivity."
-msgstr "Protocolo usado para lo conectividad a internet."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Dirección única en el mesh (ej. 10.1.1.1) que tiene que estar registrada en "
-"su comunidad local."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Configurar un nuevo interfaz virtual inalámbrico en modo punto de acceso."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Este asistente le ayudará a configurar su router para Freifunk o una red "
-"comunitaria inalámbrica similar."
-
-msgid "Unknown Error"
-msgstr "Error desconocido"
-
-msgid "Username"
-msgstr "Nombre de usuario"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Punto de acceso virtual (VAP)"
-
-msgid "Wizard"
-msgstr "Asistente"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Su dispositivo y nodos vecinos tienen que usar el mismo canal."
-
-msgid "dhcp"
-msgstr "DHCP"
-
-msgid "kbit/s"
-msgstr "Kbit/s"
-
-msgid "static"
-msgstr "estático"
-
-msgid "Configure this interface."
-msgstr "Configurar esta interfaz."
-
-msgid "recommended"
-msgstr "recomendado"
-
-msgid "Basic settings"
-msgstr "Configuración básica"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "La configuración básica está incompleta. Por favor, vaya a"
-
-msgid "Error"
-msgstr "Error"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr "No puede usar el asistente porque faltan algunos valores necesarios."
-
-msgid "and fill out all required fields."
-msgstr "y rellene los campos requeridos."
diff --git a/po/es/firewall.po b/po/es/firewall.po
deleted file mode 100644
index 18186f1..0000000
--- a/po/es/firewall.po
+++ /dev/null
@@ -1,695 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2013-09-01 17:53+0200\n"
-"Last-Translator: Manuel <freifunk@somakoma.de>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr "%s en %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s con %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s en %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(Entrada sin nombre)"
-
-msgid "(Unnamed Rule)"
-msgstr "(Reglas sin nombre)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(SNAT sin nombre)"
-
-msgid "-- Please choose --"
-msgstr "-- Seleccione --"
-
-msgid "-- custom --"
-msgstr "-- propio --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> paquetes por <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-"<var>%d</var> paquetes por <var>%s</var>, máximo <var>%d</var> paquetes."
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> y límite a %s"
-
-msgid "Action"
-msgstr "Acción"
-
-msgid "Add"
-msgstr "Añadir"
-
-msgid "Add and edit..."
-msgstr "Añadir y editar..."
-
-msgid "Advanced Settings"
-msgstr "Configuración avanzada"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Permitir traspaso desde <em>zonas de origen</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Permitir traspaso a <em>zonas de destino</em>:"
-
-msgid "Any"
-msgstr "Cualquiera"
-
-msgid "Covered networks"
-msgstr "Redes cubiertas"
-
-msgid "Custom Rules"
-msgstr "Reglas propias"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Las reglas propias le permiten ejecutar comandos de iptables que no están "
-"disponibles en el marco del cortafuegos. Los comandos se ejecutarán tras "
-"cualquier rearranque del cortafuegos, justo tras haber cargado el conjunto "
-"de reglas por defecto."
-
-msgid "Destination IP address"
-msgstr "Dirección IP destino"
-
-msgid "Destination address"
-msgstr "Dirección de destino"
-
-msgid "Destination port"
-msgstr "Puerto de destino"
-
-msgid "Destination zone"
-msgstr "Zona de destino"
-
-msgid "Do not rewrite"
-msgstr "No reescribir"
-
-msgid "Drop invalid packets"
-msgstr "Descartar paquetes no válidos"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Enable NAT Loopback"
-msgstr "Activar bucle NAT"
-
-msgid "Enable SYN-flood protection"
-msgstr "Activar protección a inundación-SYN"
-
-msgid "Enable logging on this zone"
-msgstr "Activar registro en esta zona"
-
-msgid "External IP address"
-msgstr "Dirección IP externa"
-
-msgid "External port"
-msgstr "Puerto externo"
-
-msgid "External zone"
-msgstr "Zona externa"
-
-msgid "Extra arguments"
-msgstr "Parámetros extra"
-
-msgid "Firewall"
-msgstr "Cortafuegos"
-
-msgid "Firewall - Custom Rules"
-msgstr "Cortafuegos - Reglas propias"
-
-msgid "Firewall - Port Forwards"
-msgstr "Cortafuegos - traspasos de puerto"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Cortafuegos - Reglas de tráfico"
-
-msgid "Firewall - Zone Settings"
-msgstr "Cortafuegos - Configuración de la zona"
-
-msgid "Force connection tracking"
-msgstr "Forzar seguimiento de conexión"
-
-msgid "Forward"
-msgstr "Traspasar"
-
-msgid "Forward to"
-msgstr "Traspasar a"
-
-msgid "From %s in %s"
-msgstr "Desde %s en %s"
-
-msgid "From %s in %s with source %s"
-msgstr "Desde %s en %s con origen %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "Desde %s en %s con origen %s y %s"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 only"
-msgstr "Sólo IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "Sñolo IPv6"
-
-msgid "Input"
-msgstr "Entrada"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Traspaso entre zonas"
-
-msgid "Internal IP address"
-msgstr "Dirección IP interna"
-
-msgid "Internal port"
-msgstr "Puerto interno"
-
-msgid "Internal zone"
-msgstr "Zona interna"
-
-msgid "Limit log messages"
-msgstr "Limitar registro de mensajes"
-
-msgid "MSS clamping"
-msgstr "Fijado de MSS"
-
-msgid "Masquerading"
-msgstr "Enmascaramiento"
-
-msgid "Match"
-msgstr "Coincidir"
-
-msgid "Match ICMP type"
-msgstr "Coincidir con tipo ICMP"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr "Coincidir con tráfico traspasado al puerto o rango de puertos destino."
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Coincidir con tráfico de entrada dirigido al puerto o rango de puertos "
-"destino en esta máquina"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Coincidir con tráfico de entrada originado desde el puerto o rango de "
-"puertos origen en la máquina cliente."
-
-msgid "Name"
-msgstr "Nombre"
-
-msgid "New SNAT rule"
-msgstr "Nueva regla SNAT"
-
-msgid "New forward rule"
-msgstr "Nueva regla de traspaso"
-
-msgid "New input rule"
-msgstr "Nueva regla de entrada"
-
-msgid "New port forward"
-msgstr "Nuevo traspaso de puerto"
-
-msgid "New source NAT"
-msgstr "Nuevo origen NAT"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "Coincidir sólo con tráfico de entrada a esta dirección IP."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Coincidir sólo con tráfico de entrada desde estas MACs."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr "Coincidir sólo con tráfico de entrada desde esta IP o rango."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Coincidir sólo con tráfico de entrada originado desde el puerto o rango de "
-"puertos origen en la máquina cliente"
-
-msgid "Open ports on router"
-msgstr "Abrir puertos en el router"
-
-msgid "Other..."
-msgstr "Otros..."
-
-msgid "Output"
-msgstr "Salida"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr "Pasa más parámetros a IPTables. ¡Usar con cuidado!"
-
-msgid "Port Forwards"
-msgstr "Traspasos de puerto"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"El traspaso de puertos permite a ordenadores remotos en internet conectar a "
-"un ordenador o servicio específico en la LAN privada."
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Redirigir el tráfico de entrada que coincida al puerto en la máquina interna"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Redirigir el tráfico de entrada que coincida a la máquina interna"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Restringir enmascaramiento a las subredes destino"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Restringir enmascaramiento a las subredes origen"
-
-msgid "Restrict to address family"
-msgstr "Restringir a la familia de direcciones"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "Reescribir el tráfico que coincida a estas direcciones."
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Reescribir el tráfico que coincida con este puerto origen. Deje en blanco "
-"para reescribir sólo la dirección IP."
-
-msgid "Rewrite to source %s"
-msgstr "Reescribir a origen %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "Reescribir a origen %s, %s"
-
-msgid "SNAT IP address"
-msgstr "Dirección IP SNAT"
-
-msgid "SNAT port"
-msgstr "Puerto SNAT"
-
-msgid "Source IP address"
-msgstr "Dirección IP origen"
-
-msgid "Source MAC address"
-msgstr "Dirección MAC origen"
-
-msgid "Source NAT"
-msgstr "NAT origen"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"NAT origen es una forma específica de enmascaramiento que permite el control "
-"fino del origen IP que se usa en el tráfico de salida por ejemplo para "
-"dirigir múltiples direcciones WAN a las subredes internas."
-
-msgid "Source address"
-msgstr "Dirección origen"
-
-msgid "Source port"
-msgstr "Puerto origen"
-
-msgid "Source zone"
-msgstr "Zona origen"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"El cortafuegos crea zonas sobre sus interfaces de red para controlar el "
-"flujo del tráfico."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"Estas opciones controlan las políticas de traspaso entre esta zona (%s) y "
-"otras. <em>Las zonas origen</em> cubren el tráfico traspasado <strong>desde "
-"%q</strong>. <em>Las zonas origen</em> coinciden con el tráfico traspasado "
-"desde otras zonas <strong>dirigido a %q</strong>. La regla de traspaso es "
-"<em>unidireccional</em>, por ejemplo una regla de traspaso desde la LAN a la "
-"WAN <em>no</em> implica permiso para traspasar desde la WAN a la LAN "
-"también."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"Propiedades avanzadas de la entrada \"traspaso de puertos\". No suele ser "
-"necesario modificar esta configuración."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"Propiedades avanzadas de la entrada \"reglas de tráfico\", como "
-"coincidencias en puertos de origen y destino."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Esta sección define propierdades comunes de %q. Las opciones de <em>entrada</"
-"em> y la <em>salida</em> marcan las políticas por defecto para el tráfico "
-"que entra y deja esta zona mientras que la opción <em>traspaso</em> describe "
-"la política para tráfico traspasado desde diferentes redes en la zona. "
-"<em>Redes cubiertas</em> especifican qué redes disponibles son miembros de "
-"esta zona."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "A %s en %s por <var>este dispositivo</var>"
-
-msgid "To %s in %s"
-msgstr "A %s en %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "A %s por <var>este dispositivo</var>"
-
-msgid "To %s, %s in %s"
-msgstr "A %s, %s en %s"
-
-msgid "To source IP"
-msgstr "A IP origen"
-
-msgid "To source port"
-msgstr "A puerto origen"
-
-msgid "Traffic Rules"
-msgstr "Reglas de tráfico"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"Las reglas de tráfico definen políticas para tramas que se mueven entre "
-"zonas diferentes, por ejemplo para rechazar tráfico entre ciertas máquinas o "
-"puertos WAN abiertos en el router."
-
-msgid "Via %s"
-msgstr "Vía %s"
-
-msgid "Via %s at %s"
-msgstr "Vía %s a %s"
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Puede poner varios seleccionando \"-- propio --\" e introduciendo los "
-"protocolos separados por espacio."
-
-msgid "Zone %q"
-msgstr "Zona %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Zona ⇒ Traspasos"
-
-msgid "Zones"
-msgstr "Zonas"
-
-msgid "accept"
-msgstr "aceptar"
-
-msgid "any"
-msgstr "cualquiera"
-
-msgid "any host"
-msgstr "cualquier máquina"
-
-msgid "any router IP"
-msgstr "cualquier router IP"
-
-msgid "any zone"
-msgstr "cualquier zona"
-
-msgid "don't track"
-msgstr "no seguir"
-
-msgid "drop"
-msgstr "descartar"
-
-msgid "reject"
-msgstr "rechazar"
-
-#~ msgid "Destination"
-#~ msgstr "Destino"
-
-#~ msgid "Family"
-#~ msgstr "Familia"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "Traspasar a %s en %s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "Traspasar a %s, %s en %s"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Origen"
-
-#~ msgid "To %s"
-#~ msgstr "A %s"
-
-#~ msgid "To %s at %s"
-#~ msgstr "A %s en %s"
-
-#~ msgid "Via"
-#~ msgstr "Via"
-
-#~ msgid "Accept forward"
-#~ msgstr "Aceptar traspaso"
-
-#~ msgid "Accept input"
-#~ msgstr "Aceptar entrada"
-
-#~ msgid "Disable"
-#~ msgstr "Desactivar"
-
-#~ msgid "Discard forward"
-#~ msgstr "Descartar traspaso"
-
-#~ msgid "Discard input"
-#~ msgstr "Descartar entrada"
-
-#~ msgid "Do not track forward"
-#~ msgstr "No seguir traspaso"
-
-#~ msgid "Do not track input"
-#~ msgstr "No seguir entrada"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "Rango IP"
-
-#~ msgid "IPs"
-#~ msgstr "IPs"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MACs"
-#~ msgstr "MACs"
-
-#~ msgid "Refuse forward"
-#~ msgstr "Rechazar traspaso"
-
-#~ msgid "Refuse input"
-#~ msgstr "Rechazar entrada"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "La regla está desactivada"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "La regla está activada"
-
-#~ msgid "day"
-#~ msgstr "dia"
-
-#~ msgid "hour"
-#~ msgstr "hora"
-
-#~ msgid "minute"
-#~ msgstr "minuto"
-
-#~ msgid "not"
-#~ msgstr "no"
-
-#~ msgid "port"
-#~ msgstr "puerto"
-
-#~ msgid "ports"
-#~ msgstr "puertos"
-
-#~ msgid "second"
-#~ msgstr "segundo"
-
-#~ msgid "type"
-#~ msgstr "tipo"
-
-#~ msgid "types"
-#~ msgstr "tipos"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Puerto interno (opcional)"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Reglas avanzadas"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Las reglas avanzadas le permite personalizar el corta fuego según sus "
-#~ "necesidades. Sólamente las nuevas conexiones serán afectadas por las "
-#~ "reglas. Los paquetes pertenecientes a conexiones ya abierta, se les "
-#~ "permite el libre paso por el corta fuego."
-
-#~ msgid "Port forwarding"
-#~ msgstr "Reenvío de puerto"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "El reenvío de puerto permite proveer servicios de red en una red interna "
-#~ "a una red externa (por ejemplo Internet)"
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Redirección de tráfico"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "La redirección de tráfico permite cambiar la dirección de destino de los "
-#~ "paquetes reenviados."
-
-#, fuzzy
-#~ msgid "Network"
-#~ msgstr "Redes"
-
-#~ msgid "Traffic Control"
-#~ msgstr "Control de tráfico"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Tráfico Zona-a-Zona"
-
-#, fuzzy
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Aquí puede especificar qué tráfico de red is permitido, discho tráfico "
-#~ "fluirá entre las zonas de red definidas. Sólamente las nuevas conexiones "
-#~ "serán aplicadas por las reglas. Los paquetes pertenecientes a conexiones "
-#~ "ya abierta se les permitirá el paso sobre el corta fuego. Si experimenta "
-#~ "ocacionalmente problemas de conexión, intente activar MSS Clamping de "
-#~ "otra forma, deshabilitelo para mejorar considerablemente la performance."
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#, fuzzy
-#~ msgid "Destination IP"
-#~ msgstr "Destino"
-
-#, fuzzy
-#~ msgid "IP address"
-#~ msgstr "Dirección IP"
-
-#, fuzzy
-#~ msgid "Source MAC-address"
-#~ msgstr "Dirección MAC de origen"
-
-#~ msgid "Custom forwarding"
-#~ msgstr "Renvío personalizado"
-
-#~ msgid "Input Zone"
-#~ msgstr "Zona de entrada"
-
-#~ msgid "Output Zone"
-#~ msgstr "Zona de salida"
-
-#~ msgid "External Zone"
-#~ msgstr "Zona Externa"
-
-#~ msgid "Source MAC"
-#~ msgstr "MAC de Origen"
-
-#~ msgid "Defaults"
-#~ msgstr "De fábrica"
-
-#~ msgid ""
-#~ "These are the default settings that are used if no other rules match."
-#~ msgstr ""
-#~ "Estos son los valores por defecto que son usados si no hay otra regla a "
-#~ "aplicar."
-
-#~ msgid ""
-#~ "Zones part the network interfaces into certain isolated areas to separate "
-#~ "network traffic. One or more networks can belong to a zone. The MASQ-flag "
-#~ "enables NAT masquerading for all outgoing traffic on this zone."
-#~ msgstr ""
-#~ "Las zonas dividen las interfaces de red en varias partes aisladas para "
-#~ "separar el tráfico de red. Una o mas redes pueden pertenecer a una zona. "
-#~ "La bandera MASQ activa el enmascaramiento NAT para todo el tráfico "
-#~ "saliente sobre esa zona."
-
-#~ msgid "MASQ"
-#~ msgstr "MASQ"
-
-#~ msgid "contained networks"
-#~ msgstr "redes contenidas"
diff --git a/po/es/freifunk-policyrouting.po b/po/es/freifunk-policyrouting.po
deleted file mode 100644
index 8af3458..0000000
--- a/po/es/freifunk-policyrouting.po
+++ /dev/null
@@ -1,66 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-22 22:34+0200\n"
-"PO-Revision-Date: 2012-10-14 22:49+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-"Todo el tráfico desde interfaces de estas zonas se enviará por una pasarela "
-"de la red mesh."
-
-msgid "Enable Policy Routing"
-msgstr "Activar política de enrutado"
-
-msgid "Fallback to mesh"
-msgstr "Si falla usar mesh"
-
-msgid "Firewall zones"
-msgstr "Zonas del cortafuegos"
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-"Si no se recibe una ruta por defecto de la red mesh el tráfico de las zonas "
-"de cortafuegos seleccionado se enviará por esta conexión de red. Si no desea "
-"esto marque esta opción para bloquearlo."
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-"Si su pasarela no está disponible cambie a la pasarela por defecto de la "
-"mesh."
-
-msgid "Policy Routing"
-msgstr "Política de enrutamiento"
-
-msgid "Strict Filtering"
-msgstr "Filtrado estricto"
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
-"Estas páginas se pueden usar para definir la política de enrutamiento para "
-"ciertas zonas del cortafuegos. Esto es útil si quiere usar su conexión a "
-"internet pero no quiere compartirla con otros (por eso se llama \"Modo "
-"egoísta\"). Su propio tráfico se enviará por su conexión internet mientras "
-"que el tráfico del mes usará otra pasarela en la mesh."
diff --git a/po/es/freifunk.po b/po/es/freifunk.po
deleted file mode 100644
index 019b92b..0000000
--- a/po/es/freifunk.po
+++ /dev/null
@@ -1,411 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-12-02 20:36+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr "Malo (ETX > 10)"
-
-msgid "Basic Settings"
-msgstr "Configuración básica"
-
-msgid "Basic settings"
-msgstr "Configuración básica"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Configuración básica incompleta. Por favor vaya a"
-
-msgid "Basic system settings"
-msgstr "Configuración básica del sistema"
-
-msgid "Bitrate"
-msgstr "Bitrate"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-"Comprobar nuevas versiones de firmware y realizar actualizaciones "
-"automáticas."
-
-msgid "Client network size"
-msgstr "Tamaño de la red cliente"
-
-msgid "Community"
-msgstr "Comunidad"
-
-msgid "Community profile"
-msgstr "Perfil de la comunidad"
-
-msgid "Community settings"
-msgstr "Configuración de la comunidad"
-
-msgid "Confirm Upgrade"
-msgstr "Confirmar actualización"
-
-msgid "Contact"
-msgstr "Contacto"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr "La información de contacto no está completa. Por favor vaya a"
-
-msgid "Coordinates"
-msgstr "Coordenadas"
-
-msgid "Country code"
-msgstr "Código de país"
-
-msgid "Default routes"
-msgstr "Rutas por defecto"
-
-msgid "Disable default content"
-msgstr "Desactive contenido por defecto"
-
-msgid "Diversity is enabled for device"
-msgstr "Diversidad activar para el dispositivo"
-
-msgid "E-Mail"
-msgstr "E-Mail"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr "Editar índice"
-
-msgid "Enable IPv6"
-msgstr "Activar IPv6"
-
-msgid "Error"
-msgstr "Error"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "Busca sus coordenadas con OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "Freifunk"
-
-msgid "Freifunk Overview"
-msgstr "Resumen de Freifunk"
-
-msgid "Freifunk Remote Update"
-msgstr "Actualización remota de Freifunk"
-
-msgid "Gateway"
-msgstr "Pasarela"
-
-msgid "Go to"
-msgstr "Ir a"
-
-msgid "Good (2 < ETX < 4)"
-msgstr "Bueno  (2 < ETX < 4)"
-
-msgid "Green"
-msgstr "Verde"
-
-msgid "Hello and welcome in the network of"
-msgstr "Hola y bienvenido a la red de"
-
-msgid "Hide OpenStreetMap"
-msgstr "Ocultar OpenStreetMap"
-
-msgid "Homepage"
-msgstr "Página inicial"
-
-msgid "Hostname"
-msgstr "Nombre de máquina"
-
-msgid "IPv6 Config"
-msgstr "Configuración de IPv6"
-
-msgid "IPv6 Prefix"
-msgstr "Prefijo IPv6"
-
-msgid "IPv6 network in CIDR notation."
-msgstr "Red IPv6 en notación CIDR."
-
-msgid "If selected then the default content element is not shown."
-msgstr "No mostrar el contenido por defecto."
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Si se encuentra interesado en nuestro proyecto contácte, por favor, con su "
-"comunidad local mas cercana"
-
-msgid "Index Page"
-msgstr "Índice"
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"El acceso a Internet depende de condiciones tanto técnicas como "
-"organizativas por lo que puede no funcionarle."
-
-msgid "It is operated by"
-msgstr "Administrado por"
-
-msgid "Keep configuration"
-msgstr "Mantener configuración"
-
-msgid "Latitude"
-msgstr "Latitud"
-
-msgid "Legend"
-msgstr "Leyenda"
-
-msgid "Load"
-msgstr "Carga"
-
-msgid "Local Time"
-msgstr "Hora local"
-
-msgid "Location"
-msgstr "Lugar"
-
-msgid "Longitude"
-msgstr "Longitud"
-
-msgid "Map"
-msgstr "Mapa"
-
-msgid "Map Error"
-msgstr "Error en el map"
-
-msgid "Memory"
-msgstr "Memoria"
-
-msgid "Mesh prefix"
-msgstr "Prefijo mesh"
-
-msgid "Metric"
-msgstr "Métrica"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid "Network"
-msgstr "Red"
-
-msgid "Network for client DHCP addresses"
-msgstr "Red para las direcciones DHCP de los clientes"
-
-msgid "Nickname"
-msgstr "Apodo"
-
-msgid "No default routes known."
-msgstr "Sin rutas por defecto."
-
-msgid "Notice"
-msgstr "Aviso"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr "Administrador"
-
-msgid "Orange"
-msgstr "Naranja"
-
-msgid "Overview"
-msgstr "Repaso"
-
-msgid "Package libiwinfo required!"
-msgstr "¡Es necesario el paquete libiwinfo!"
-
-msgid "Phone"
-msgstr "Teléfono"
-
-msgid "Please fill in your contact details below."
-msgstr "Por favor, introduzca sus datos de contacto."
-
-msgid "Please set your contact information"
-msgstr "Por favor, configure su información de contacto"
-
-msgid "Power"
-msgstr "Potencia"
-
-msgid "Processor"
-msgstr "Procesador"
-
-msgid "Profile"
-msgstr "Perfil"
-
-msgid "Profile (Expert)"
-msgstr "Perfil (experto)"
-
-msgid "Realname"
-msgstr "Nombre real"
-
-msgid "Red"
-msgstr "Rojo"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-"Elija su posición pulsando el ratón sobre el mapa. El mapa solo aparecerá si "
-"está conectado a internet."
-
-msgid "Show OpenStreetMap"
-msgstr "Mostrar OpenStreetMap"
-
-msgid "Show on map"
-msgstr "Mostrar en el mapa"
-
-msgid "Signal"
-msgstr "Señal"
-
-msgid "Splash"
-msgstr "Presentación"
-
-msgid "Start Upgrade"
-msgstr "Iniciar actualización"
-
-msgid "Statistics"
-msgstr "Estadísticas"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr "Aún utilizable (4 < ETX < 10)"
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "TX"
-msgstr "TX"
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"El paquete <em>libiwinfo</em> no está instalado. ¡Debe instalarlo para que "
-"funcione la red inalámbrica!"
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-"El servicio OLSRd no está configurado para tomar los datos de posición desde "
-"la red.<br />Asegúrese de que el plugin \"nameservice\" está bien "
-"configurado y que la opción <em>latlon_file</em> está marcada."
-
-msgid "The installed firmware is the most recent version."
-msgstr "El firmare instalado está en la versión más reciente."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-"Configuración básica de su comunidad inalámbrica. Aquí puede definir los "
-"valores por defecto para el asistente SIN afectar a la configuración del "
-"router."
-
-msgid "These are the settings of your local community."
-msgstr "Configuración de su comunidad local."
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-"Configuración de su router para Freifunk o redes comunitarias similares."
-
-msgid "This is the access point"
-msgstr "Este es el punto de acceso"
-
-msgid "Update Settings"
-msgstr "Actualizar configuración"
-
-msgid "Update available!"
-msgstr "¡Actualización disponible!"
-
-msgid "Uptime"
-msgstr "Tiempo activo"
-
-msgid "Verify downloaded images"
-msgstr "Verificar las descargas"
-
-msgid "Very good (ETX < 2)"
-msgstr "Muy bueno (ETX < 2)"
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Somos una iniciativa que pretende crear una red libre, independiente y "
-"abierta utilizando una red mesh inalámbrica."
-
-msgid "Wireless Overview"
-msgstr "Resumen de red inalámbrica"
-
-msgid "Yellow"
-msgstr "Amarillo"
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-"Puede mostrar más contenido en el índice público poniendo XHTML válido en "
-"este formulario.<br />Las cabeceras deben ir entre &lt;h2&gt; y &lt;/h2&gt;."
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr "Puede obtener información acerca de la iniciativa global Freifunk en"
-
-msgid "You can manually edit the selected community profile here."
-msgstr "Edite el perfil comunitario local."
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr "Elija un perfil para editarlo. Para elegir el perfil vaya a"
-
-msgid "and fill out all required fields."
-msgstr "y rellene los campos requeridos."
-
-msgid "buffered"
-msgstr "en búfer"
-
-msgid "cached"
-msgstr "en caché"
-
-msgid "e.g."
-msgstr "ej."
-
-msgid "free"
-msgstr "libre"
-
-msgid "to disable it."
-msgstr "para desactivarlo."
-
-msgid "used"
-msgstr "usado"
-
-msgid "wireless settings"
-msgstr "configuración inalámbrica"
diff --git a/po/es/hd_idle.po b/po/es/hd_idle.po
deleted file mode 100644
index d36bd78..0000000
--- a/po/es/hd_idle.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-08-22 17:44+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "Disco"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Enable debug"
-msgstr "Activar depuración"
-
-msgid "Idle-time"
-msgstr "Tiempo de inactividad"
-
-msgid "Idle-time unit"
-msgstr "Unidad de tiempo"
-
-msgid "Settings"
-msgstr "Configuración"
-
-# Hours
-msgid "h"
-msgstr "h"
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle es un programa que gestiona el reposo de discos externos tras un "
-"tiempo de inactividad."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "minutos"
diff --git a/po/es/meshwizard.po b/po/es/meshwizard.po
deleted file mode 100644
index ff2bc91..0000000
--- a/po/es/meshwizard.po
+++ /dev/null
@@ -1,136 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-23 22:25+0200\n"
-"PO-Revision-Date: 2012-11-24 10:22+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr "Activar o desactivar la configuración IPv6 globalmente."
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr "Proteger la LAN de otros nodos y clientes"
-
-msgid "Cleanup config"
-msgstr "Borrar configuración"
-
-msgid "Configure this interface"
-msgstr "Configurar esta interfaz"
-
-msgid "DHCP IP range"
-msgstr "Rango IP de DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP asignará direcciones IP automáticamente a los clientes"
-
-msgid "Enable DHCP"
-msgstr "Activar DHCP"
-
-msgid "Enable RA"
-msgstr "Activar RA"
-
-msgid "Enabled"
-msgstr "Activado"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "IPv6 Settings"
-msgstr "Configuración IPv6"
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr "Borrar la configuración antes de establecer una nueva."
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Mesh IP address"
-msgstr "Dirección IP del mesh"
-
-msgid "Mesh IPv6 address"
-msgstr "Dirección IPv6 del mesh"
-
-msgid "Mesh Wizard"
-msgstr "Asistente del mesh"
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-"Nota: esto configurará esta interfaz para uso mesh, es decir: la añadirá a "
-"la zona \"freifunk\" y activará OSLR."
-
-msgid "Protect LAN"
-msgstr "Proteger LAN"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr "Permitir a otros usar su conexión para acceder a internet."
-
-msgid "Send router advertisements on this device."
-msgstr "Envía publicaciones de routers por este dispositivo."
-
-msgid "Share your internet connection"
-msgstr "Compartir su conexión a internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Rango IP desde el que asignar direcciones IP (ej. 10.1.2.1/28). Si el rango "
-"está dentro del de la mesh se declarará como HNA. Cualquier otro rango usará "
-"NAT. Si se deja vación tomará el del perfil de la comunidad."
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr "Este rango IP no está dentro del de la red mesh"
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-"Dirección única IPv6 en notación CIDR (p.e.: 2001:1:2:3::1/64) y que tiene "
-"que estar registrada en su comunidad local."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Esta dirección debe ser única en la mesh (ej. 10.1.1.1) y debe registrarse "
-"en su comunidad local."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Configurar un nuevo interfaz virtual inalámbrico en modo punto de acceso."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Este asistente le ayudará a configurar su ruter para Freifunk o una red "
-"comunitaria similar."
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Punto de acceso virtual (VAP)"
-
-msgid "Wizard"
-msgstr "Asistente"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Su dispositivo y los vecinos deben usar el mismo canal."
-
-msgid "recommended"
-msgstr "recomendado"
diff --git a/po/es/minidlna.po b/po/es/minidlna.po
deleted file mode 100644
index 33ebb8f..0000000
--- a/po/es/minidlna.po
+++ /dev/null
@@ -1,184 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-15 21:48+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Configuración avanzada"
-
-msgid "Album art names:"
-msgstr "Imágenes de álbumes:"
-
-msgid "Announced model number:"
-msgstr "Número de modelo declarado:"
-
-msgid "Announced serial number:"
-msgstr "Número de serie declarado:"
-
-msgid "Browse directory"
-msgstr "Ver directorio"
-
-msgid "Collecting data..."
-msgstr "Recopilando información..."
-
-msgid "Database directory:"
-msgstr "Directorio de la base de datos:"
-
-msgid "Enable TIVO:"
-msgstr "Activar TIVO:"
-
-msgid "Enable inotify:"
-msgstr "Activar inotify:"
-
-msgid "Enable:"
-msgstr "Activar:"
-
-msgid "Friendly name:"
-msgstr "Nombre amigable:"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "Interfaces:"
-msgstr "Interfaces:"
-
-msgid "Log directory:"
-msgstr "Directorio de registro:"
-
-msgid "Media directories:"
-msgstr "Directorios de medios:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNA es un servidor que buscar ser compatible con clientes DLNA/UPnP-AV."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Número de modelo que el demonio miniDLNA mostrará a los clientes en su "
-"descripción XML."
-
-msgid "Music"
-msgstr "Música"
-
-msgid "Network interfaces to serve."
-msgstr "Interfaces de red a usar."
-
-msgid "Notify interval in seconds."
-msgstr "Intervalo de notificación en segundos."
-
-msgid "Notify interval:"
-msgstr "Intervalo de notificación:"
-
-msgid "Pictures"
-msgstr "Imágenes"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-"Puerto para tráfico HTTP (descripciones, SOAP y transferencia de medios)."
-
-msgid "Port:"
-msgstr "Puerto:"
-
-msgid "Presentation URL:"
-msgstr "URL de presentación:"
-
-msgid "Root container:"
-msgstr "Raíz de contenidos:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Número de serie que el demonio miniDLNA informará a los clientes en su "
-"descripción XML."
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr "Personalizar el nombre mostrado a los clientes."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Indicar el directorio en el que MiniDLNA guardará su base de datos y la "
-"caché de álbumes."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr "Indicar el directorio donde MiniDLNA guardará su fichero de registro."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr "Inotify descubrirá automáticamente nuevos ficheros."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr "Envío de ficheros .jpg y .mp3 a un TiVo usando HMO."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Seguir estrictamente el estándar DLNA. Esto permite el reescalado desde el "
-"servidor de imágenes JPEG grandes que pueden perjudicar el rendimiento en "
-"(al menos) productos DLNA de Sony."
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Directorio a explorar. Si quiere restringir el directorio a un contenido "
-"específico puede añadir el tipo ('A' par audio, 'V' para vídeo o 'P' para "
-"imágenes), seguido por una coma al nombre del directorio (ej. media_dir=A,/"
-"mnt/media/Music). Se puede establecer varios directorios."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "Camino al socket de MiniSSDPd."
-
-msgid "Standard container"
-msgstr "Contenedor estándar"
-
-msgid "Strict to DLNA standard:"
-msgstr "Ceñirse al estándar DLNA:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"El servicio miniDLNA está activo, sirviendo %d ficheros de audio, %d de "
-"vídeo y %d de imágenes."
-
-msgid "The miniDLNA service is not running."
-msgstr "El servicio miniDLNA no está arrancado."
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr "Lista de nombres a comprobar para buscar imágenes de álbumes."
-
-msgid "Video"
-msgstr "Vídeo"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "Estado de miniDLNA"
-
-msgid "miniSSDP socket:"
-msgstr "Socket de miniSSDP:"
diff --git a/po/es/mmc_over_gpio.po b/po/es/mmc_over_gpio.po
deleted file mode 100644
index ee0b0c6..0000000
--- a/po/es/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-08-19 21:05+0200\n"
-"Last-Translator: josevteg <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr "Pin CLK"
-
-msgid "CS_pin"
-msgstr "Pin CS"
-
-msgid "DI_pin"
-msgstr "Pin DI"
-
-msgid "DO_pin"
-msgstr "Pin DO"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "MMC/SD driver configuration"
-msgstr "Configuración de controlador MMC/SD"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid "Name"
-msgstr "Nombre"
-
-msgid "Settings"
-msgstr "Configuración"
diff --git a/po/es/multiwan.po b/po/es/multiwan.po
deleted file mode 100644
index 1a54f75..0000000
--- a/po/es/multiwan.po
+++ /dev/null
@@ -1,124 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-23 23:07+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Reintentos ante fallo de la WAN"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Reintentos tras recuperar la WAN"
-
-msgid "Auto"
-msgstr "Auto"
-
-msgid "Collecting data..."
-msgstr "Recuperando datos..."
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Configure las reglas que redirigen el tráfico saliente a través de los "
-"enlaces WAN salientes especificados."
-
-msgid "DNS Server(s)"
-msgstr "Servidor/es DNS"
-
-msgid "Default Route"
-msgstr "Ruta por defecto"
-
-msgid "Destination Address"
-msgstr "Dirección de destino"
-
-msgid "Disable"
-msgstr "Desactivar"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Failing"
-msgstr "Fallando"
-
-msgid "Failover Traffic Destination"
-msgstr "Destino del tráfico en caso de fallo"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "Monitores de salud ICMP"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "Espera monitor de salud ICMP"
-
-msgid "Health Monitor Interval"
-msgstr "Intervalo del monitor de salud"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"El monitor de salud detecta y corrige cambios en la red y conexiones "
-"fallidas."
-
-msgid "KO"
-msgstr "KO"
-
-msgid "Load Balancer Distribution"
-msgstr "Distribución del balanceador de carga"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Balanceador de carga (compatibilidad)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Balanceador de carga (rendimiento)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr "Estado de Multi-WAN"
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Reglas de tráfico Multi-WAN"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Multi-WAN permite el use varios enlaces de salida para balancear la carga y "
-"control de fallos."
-
-msgid "None"
-msgstr "Ninguno"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "Ports"
-msgstr "Puertos"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Recovering"
-msgstr "Recuperación"
-
-msgid "Source Address"
-msgstr "Dirección origen"
-
-msgid "Unknown"
-msgstr "Desconocido"
-
-msgid "WAN Interfaces"
-msgstr "Interfaces WAN"
-
-msgid "WAN Uplink"
-msgstr "Enalce saliente WAN"
-
-msgid "all"
-msgstr "todos"
diff --git a/po/es/ntpc.po b/po/es/ntpc.po
deleted file mode 100644
index 40edf24..0000000
--- a/po/es/ntpc.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-11-25 11:14+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "Ajuste del Reloj"
-
-msgid "Count of time measurements"
-msgstr "Medida del tiempo"
-
-msgid "Current system time"
-msgstr "Hora actual del sistema"
-
-msgid "General"
-msgstr "General"
-
-msgid "Hostname"
-msgstr "Nombre de la máquina"
-
-msgid "Offset frequency"
-msgstr "Desplazamiento de frecuencia"
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Synchronizes the system time"
-msgstr "Sincronizar la hora del sistema"
-
-msgid "Time Server"
-msgstr "Servidor de tiempo"
-
-msgid "Time Servers"
-msgstr "Servidores de hora"
-
-msgid "Time Synchronisation"
-msgstr "Sincronización horaria"
-
-msgid "Update interval (in seconds)"
-msgstr "Intervalo de actualización (en segundos)"
-
-msgid "empty = infinite"
-msgstr "vacío = infinito"
diff --git a/po/es/olsr.po b/po/es/olsr.po
deleted file mode 100644
index 5cc285d..0000000
--- a/po/es/olsr.po
+++ /dev/null
@@ -1,672 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-15 21:36+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Active MID announcements"
-msgstr "Declaraciones MID activas"
-
-msgid "Active OLSR nodes"
-msgstr "Nodos OLSR activos"
-
-msgid "Active host net announcements"
-msgstr "Declaraciones activas de máquinas en la red"
-
-msgid "Advanced Settings"
-msgstr "Configuración avanzada"
-
-msgid "Allow gateways with NAT"
-msgstr "Permitir pasarelas con NAT"
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr "Permitir seleccionar una pasarela IPv4 con NAT"
-
-msgid "Announce uplink"
-msgstr "Declarar enlace de subida"
-
-msgid "Announced network"
-msgstr "Red declarada"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr "Ambos valores en notación decimal con punto."
-
-msgid "Broadcast address"
-msgstr "Dirección de propagación"
-
-msgid "Configuration"
-msgstr "Configuración"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid "Display"
-msgstr "Mostrar"
-
-msgid "Downlink"
-msgstr "Enlace de bajada"
-
-msgid "Download Config"
-msgstr "Configuración de descarga"
-
-msgid "ETX"
-msgstr "ETX"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-"Activar SmartGateway. Si se desactiva el resto de parámetros de SmartGateway "
-"se ignoran. \"No\" por defecto."
-
-msgid "Enable this interface."
-msgstr "Activar esta interfaz."
-
-msgid "Enabled"
-msgstr "Activado"
-
-msgid "Expected retransmission count"
-msgstr "Contador de retransmisión esperado"
-
-msgid "FIB metric"
-msgstr "Métrica FIB"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-"FIBMetric controla el valor métrico de los conjuntos OLSRd. \"Plano\" "
-"significa que la métrica es siempre 2. Este es el valor preferido porque "
-"ayuda al enrutador del kernel de linux a limpiar valores antiguos. \"Correct"
-"\" usa como métrica el número de saltos. \"Approx\" usa la cuenta de saltos "
-"también, pero solo la actualiza si cambia el siguiente salto también. Por "
-"defecto \"flat\"."
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr "Mecanismo Fisheye para TCs (marcado = activado). Activado por defecto"
-
-msgid "Gateway"
-msgstr "Pasarela"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "General settings"
-msgstr "Configuración general"
-
-msgid "HNA"
-msgstr "HNA"
-
-msgid "HNA Announcements"
-msgstr "Declaraciones HNA"
-
-msgid "HNA interval"
-msgstr "Intervalo HNA"
-
-msgid "HNA validity time"
-msgstr "Tiempo de validez de HNA"
-
-msgid "Hello"
-msgstr "Saludo"
-
-msgid "Hello interval"
-msgstr "Intervalo de saludo"
-
-msgid "Hello validity time"
-msgstr "Tiempo de validez del saludo"
-
-msgid "Hna4"
-msgstr "Hna4"
-
-msgid "Hna6"
-msgstr "Hna6"
-
-msgid "Hops"
-msgstr "Saltos"
-
-msgid "Hostname"
-msgstr "Nombre de máquina"
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-"Las máquinas de una red OLSR pueden declarar conectividad con redes externas "
-"usando mensajes HNA."
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-"Histéresis para la sensibilidad del enlace (sólo para métrica de saltos). La "
-"histéresis da más robustez a la sensibilidad de enlace pero retrasa el "
-"registro de vecinos. \"Sí\" por defecto"
-
-msgid "IP Addresses"
-msgstr "Direcciones IP"
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-"Versión IP a usar. Si se selecciona 6and4 se arrancarán una instancia de "
-"oslrd para cada protocolo."
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 broadcast"
-msgstr "Propagar IPv4"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-"Dirección de propagación IPv4 para paquetes salientes OLSR. Por ejemplo "
-"\"255.255.255.255\". Por defecto es \"0.0.0.0\" que hace que se use la "
-"interfaz de propagación IP."
-
-msgid "IPv4 source"
-msgstr "IPv4 origen"
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-"Dirección origen IPv4 para paquetes OLSR. Por defecto es \"0.0.0.0\" que "
-"hace que se use la interfaz de propagación IP."
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 multicast"
-msgstr "Multidifusión IPv6"
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-"Dirección IPv6 de multidifusión. Por defecto es \"FF02::6D\", la dirección "
-"de multidifusión local en routers MANET."
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-"La red IPv6 debe escribirse en notación completa y el prefijo debe estar en "
-"notación CIDR."
-
-msgid "IPv6 source"
-msgstr "IPv6 origen"
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-"Prefijo origen IPv6. OLSRd elegirá un interfaz IP que encaje con el prefijo "
-"de este parámetro. Por defecto es \"0::/0\" que provoca el uso de un "
-"interfaz IP no local."
-
-msgid "IPv6-Prefix of the uplink"
-msgstr "Prefijo IPv6 para el enlace de subida"
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-"Si la ruta a la pasarela actual cambia su ETX de se multiplica por este "
-"valor antes de compararse con el nuevo. El parámetro debe estar entre 0.1 y "
-"1.0, pero debería aproximarse a 1.0 si se cambia.<br /><b>AVISO:</b> No debe "
-"usarse junto con la métrica etx_ffeth!<br />Por defecto es 1.0."
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr "Este nodo usa NAT para conectar a internet. \"Sí\" por defecto."
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-"El modo de interfaz se usar para evitar traspaso innecesario de paquetes en "
-"interfaces de red conmutados. Los modos válidos son \"mesh\" y \"ether\". "
-"Por defecto es \"mesh\"."
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interfaces Defaults"
-msgstr "Valores por defecto de los interfaces"
-
-msgid "Internet protocol"
-msgstr "Protocolo de Internet"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-"Intervalo de sondeo de cambios de configuración a interfaces de red (en "
-"segundos). Por defecto es \"2.5\"."
-
-msgid "Known OLSR routes"
-msgstr "Rutas OLSR conocidas"
-
-msgid "LQ"
-msgstr "LQ"
-
-msgid "LQ aging"
-msgstr "LQ - Envejecimiento"
-
-msgid "LQ algorithm"
-msgstr "LQ - Algoritmo"
-
-msgid "LQ fisheye"
-msgstr "LQ - Ojo de pez"
-
-msgid "LQ level"
-msgstr "LQ - Nivel"
-
-msgid "Last hop"
-msgstr "Último salto"
-
-msgid "Legend"
-msgstr "Leyenda"
-
-msgid "Library"
-msgstr "Biblioteca"
-
-msgid "Link Quality Settings"
-msgstr "Configuración de calidad de enlace"
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-"Factor de envejecimiento de la calidad del enlace (sólo para CE nivel 2). "
-"Parámetro de ajuste para etx_float y etx_fpm, valores menores implican "
-"cambios más lentos en el valor ETX. (los valores permitidos están entre 0.01 "
-"y 1.0)"
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-"Algoritmo de calidad de enlace (solo para CE nivel 2).<br /><b>etx_float</"
-"b>: ETX en punto flotante con envejecimiento exponencial<br /><b>etx_fpm</"
-"b> : igual que etx_float, pero con aritmética entera<br /><b>etx_ff</b> : "
-"ETX freifunk, variante etx que usar todo el tráfico OLSR (en vez de sólo "
-"\"hellos\") para los cálculos ETX<br /><b>etx_ffeth</b>: variante "
-"incompatible de etx_ff que permite enlaces ethernet con ETX 0.1.<br />Por "
-"defecto \"etx_ff\""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-"Intercambio del nivel de calidad del enlace entre \"cuenta de saltos\" y "
-"enrutado \"basado en coste\" (principalmente ETX).<br /><b>0</b> = no usar "
-"calidad del enlace<br /><b>2</b> = use calidad del enlace para selección de "
-"MPR y enrutado<br />Por defecto es 2"
-
-msgid "LinkQuality Multiplicator"
-msgstr "Multilplicador de calidad de enlace"
-
-msgid "Links per node (average)"
-msgstr "Media de enlaces por nodo"
-
-msgid "Links total"
-msgstr "Enlaces totales"
-
-msgid "Local interface IP"
-msgstr "IP de la interfaz local"
-
-msgid "MID"
-msgstr "MID"
-
-msgid "MID interval"
-msgstr "Intervalo de MID"
-
-msgid "MID validity time"
-msgstr "Tiempo de validez de MID"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Main IP"
-msgstr "IP principal"
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Asegúrese de que OLSRd se está ejecutando, que el plugin \"txtinfo\" esté "
-"cargado, configurado en el puerto 2006 y que acepta conexiones desde "
-"127.0.0.1."
-
-msgid "Metric"
-msgstr "Métrica"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-"Multiplicar rutas por este factor. Valores entre 0,01 y 1. Sólo se usa si el "
-"nivel de CA es mayor que 0. Ejemplos:<br />reducir CE a la mitad a "
-"192.168.0.1: \"192.168.0.1 0.5\"<br />reducir CE a todos los nodos en esta "
-"interfaz el 20%: \"default 0.8\""
-
-msgid "NAT threshold"
-msgstr "Umbral NAT"
-
-msgid "NLQ"
-msgstr "NLQ"
-
-msgid "Neighbors"
-msgstr "Vecinos"
-
-msgid "Neighbour IP"
-msgstr "IP vecina"
-
-msgid "Neighbours"
-msgstr "Vecinos"
-
-msgid "Netmask"
-msgstr "Máscara de red"
-
-msgid "Network"
-msgstr "Red"
-
-msgid "Network address"
-msgstr "Dirección de red"
-
-msgid "Nic changes poll interval"
-msgstr "Intervalo de muestreo de cambios de nic"
-
-msgid "Nodes"
-msgstr "Nodos"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "OLSR - Display Options"
-msgstr "OLSR - Mostrar opciones"
-
-msgid "OLSR - HNA-Announcements"
-msgstr "OLSR - Declaraciones HNA"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - Plugins"
-
-msgid "OLSR Daemon"
-msgstr "Demonio OLSR"
-
-msgid "OLSR Daemon - Interface"
-msgstr "Demonio OLSR - Interfaz"
-
-msgid "OLSR connections"
-msgstr "Conexiones OLSR"
-
-msgid "OLSR gateway"
-msgstr "Puerta de enlace OLSR"
-
-msgid "OLSR node"
-msgstr "Nodo OLSR"
-
-msgid "Overview"
-msgstr "Resumen"
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Resumen de declaraciones OLSR de máquinas activas"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Resumen de conexiones de OLSR vivas"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Nodos conocidos OLSR"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Rutas conocidas a otros nodos OLSR"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr "Resumen de interfaces con OLSR en ejecución"
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Declaraciones de múltiples interfaces conocidas"
-
-msgid "Overview of smart gateways in this network"
-msgstr "Pasarelas inteligentes en esta red"
-
-msgid "Plugin configuration"
-msgstr "Configuración del plugin"
-
-msgid "Plugins"
-msgstr "Plugins"
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr "Ratio de muestreo de paquetes OLSR en segundos. Por defecto es 0.05."
-
-msgid "Pollrate"
-msgstr "Tasa de muestreo"
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Prefix"
-msgstr "Prefijo"
-
-msgid "Resolve"
-msgstr "Calcular"
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-"Calcula los nombres de máquina en las páginas de estado. Suele ser seguro, "
-"pero las páginas se cargarán lentamente si usa IPs públicas y tiene una "
-"configuración inestable de DNS."
-
-msgid "Routes"
-msgstr "Rutas"
-
-msgid "Secondary OLSR interfaces"
-msgstr "Interfaces OLSR secundarias"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-"Configura la dirección IP principal (IP originadora) del router. NUNCA debe "
-"cambiar mientras OLSRd esté activa. Por defecto es \"0.0.0.0\" que provoca "
-"el uso de la IP del primer interfaz."
-
-msgid "SmartGW"
-msgstr "SmartGW"
-
-msgid "SmartGW announcements"
-msgstr "Declaraciones SmartGW"
-
-msgid "SmartGateway is not configured on this system."
-msgstr "SmartGateway no está configurado."
-
-msgid "Source address"
-msgstr "Dirección origen"
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-"Especifica la velocidad del enlace en kilobits/s. El primer parámetro es la "
-"subida y el segundo la bajada. Por defecto es \"128 1024\"."
-
-msgid "Speed of the uplink"
-msgstr "Velocidad de subida"
-
-msgid "State"
-msgstr "Estado"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Success rate of packages received from the neighbour"
-msgstr "Ratio de éxito de paquetes recibidos de la vecindad"
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr "Ratio de éxito de paquetes enviados a la vecindad"
-
-msgid "TC"
-msgstr "TC"
-
-msgid "TC interval"
-msgstr "Intervalo TC"
-
-msgid "TC validity time"
-msgstr "Validez de TC"
-
-msgid "TOS value"
-msgstr "TOS"
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-"El demonio OLSR es una implementación del protocolo Optimized Link State "
-"Routing. Permite enrutado mesh para cualquier equipo en red. Funciona sobre "
-"cualquier tarjeta wi.fi que soporte el modo ad-hoc y cualquier dispositivo "
-"ethernet. Puede visitar <a href='http://www.olsr.org'>olsrd.org</a> para "
-"ayuda y documentación."
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-"Willingness fija a usar. Si no se establece se calculará dinámicamente "
-"basándose en el estado de la batería y la corriente. Por defecto es 3."
-
-msgid "The interface OLSRd should serve."
-msgstr "Interfaz a usar por OLSRD."
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-"Puerto a usar por OLSR. Debería ser 698 tal y como asigna IANA. Puede tener "
-"un valor entre 1 y 65535."
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-"Prefijo IPv6 a mostrar a clientes del enlace. Puede hacer que un cliente "
-"cambio su dirección IPv6 para usar la pasarela sin ningún tipo de traducción "
-"de dirección. La longitud máxima del prefijo es 64 bits. Por defecto es "
-"\"::/0\" (sin prefijo)."
-
-msgid "Timing and Validity"
-msgstr "Tiempo y validez"
-
-msgid "Topology"
-msgstr "Topología"
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-"Tipo de servicio para la cabecera de control de tráfico de IP. Por defecto "
-"es 16."
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "¡No puedo conectar con el demonio OLSR!"
-
-msgid "Uplink"
-msgstr "Enlace saliente"
-
-msgid "Uplink uses NAT"
-msgstr "El enlace saliente usa NAT"
-
-msgid "Use hysteresis"
-msgstr "Usar histéresis"
-
-msgid "Version"
-msgstr "Versión"
-
-msgid "WLAN"
-msgstr "WLAN"
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-"Aviso: kmod-ipip no está instalado. Sin kmod-ipip SmartGateway no funcionará."
-
-msgid "Weight"
-msgstr "Peso"
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-"Cuando hayan múltiples enlaces entre máquinas el peso del interfaz se usar "
-"para determinar qué enlace usar. Normalmente se calcula automáticamente "
-"basándose en las características de la interfaz, pero puede indicar un valor "
-"fijo. OLSRd elegirá enlaces con el valor menor.<br /><b>Nota:</b> El peso "
-"del interfaz se usao sólo cuando LinkQualityLevel está en 0. Para otros "
-"valores se usará el valor del interfaz EXT."
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-"Tipo de enlace exportado a otros nodos del mesh. Un enlace se detecta "
-"buscando una HNA local de 0.0.0.0/0, ::ffff:0:0/96 o 2000::/3. Por defecto "
-"\"both\"."
-
-msgid "Willingness"
-msgstr "Willingness"
diff --git a/po/es/openvpn.po b/po/es/openvpn.po
deleted file mode 100644
index 8b5e7ac..0000000
--- a/po/es/openvpn.po
+++ /dev/null
@@ -1,558 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-15 21:51+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', o 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Aceptar opciones envidadas desde el servidor"
-
-msgid "Add"
-msgstr "Añadir"
-
-msgid "Add route after establishing connection"
-msgstr "Añadir la ruta tras establecer la conexión"
-
-msgid "Additional authentication over TLS"
-msgstr "Autentificación adicional con TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Permitir el tráfico cliente-a-cliente"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Permitir múltiples clientes con el mismo certificado"
-
-msgid "Allow only one session"
-msgstr "Permitir sólo una sesión"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Permitir al conectado cambiar su IP o puerto"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Máximo de clientes conectados"
-
-msgid "Allowed maximum of internal"
-msgstr "Máximo de internos"
-
-msgid "Allowed maximum of new connections"
-msgstr "Máximo de nuevas conexiones"
-
-msgid "Append log to file"
-msgstr "Unir registro al fichero"
-
-msgid "Authenticate using username/password"
-msgstr "Autentificar con nombre usuario y contraseña"
-
-msgid "Automatically redirect default route"
-msgstr "Redirigir automáticamente la ruta por defecto"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr "Instancias OpenVPN configuradas y estado actual"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "Comando/script a llamar al cerrar el dispositivo TUn/TAP"
-
-msgid "Certificate authority"
-msgstr "Autoridad certificativa"
-
-msgid "Change process priority"
-msgstr "Cambiar la prioridad del proceso"
-
-msgid "Change to directory before initialization"
-msgstr "Cambiar a este directorio antes de inicializar"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Comprobar certificados contra un CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Restringir a este directorio tras inicializar"
-
-msgid "Client is disabled"
-msgstr "Cliente desactivado"
-
-msgid "Configuration category"
-msgstr "Categoría de configuración"
-
-msgid "Configure client mode"
-msgstr "Configurar el modo cliente"
-
-msgid "Configure server bridge"
-msgstr "Configurar el puente servidor"
-
-msgid "Configure server mode"
-msgstr "Configurar el modo servidor"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Conectar por un proxy Socks5"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "Conectar a la máquina remota usando un proxy HTTP"
-
-msgid "Connection retry interval"
-msgstr "Intervalo de reconexión"
-
-msgid "Cryptography"
-msgstr "Criptografía"
-
-msgid "Daemonize after initialization"
-msgstr "Demonizar tras inicialización"
-
-msgid "Delay n seconds after connection"
-msgstr "Espera tras conexión (segundos)"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "Espera para la apertura TUN/TAP y ejecución del script de arranque"
-
-msgid "Diffie Hellman parameters"
-msgstr "Parámetros Diffie-Hellman"
-
-msgid "Directory for custom client config files"
-msgstr "Directorio de configuraciones personalizadas"
-
-msgid "Disable Paging"
-msgstr "Desactivar paginación"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Desactivar vector de inicialización de cifrado"
-
-msgid "Disable options consistency check"
-msgstr "Desactivar comprobación de consistencia de opciones"
-
-msgid "Disable replay protection"
-msgstr "Desactivar la protección contra reproducción"
-
-msgid "Do not bind to local address and port"
-msgstr "No asociar a un puerto y dirección locales"
-
-msgid "Don't actually execute ifconfig"
-msgstr "No ejecutar ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "No añadir rutas automáticamente"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "No guardar las contraseñas --askpass o --auth-user-pass"
-
-msgid "Don't inherit global push options"
-msgstr "No heredar opciones push globales"
-
-msgid "Don't log timestamps"
-msgstr "No guardar en registro horas"
-
-msgid "Don't re-read key on restart"
-msgstr "No releer la clave al rearrancar"
-
-msgid "Don't require client certificate"
-msgstr "No es necesario certificado cliente"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "No usar compresión adaptativa LZO"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "No avisar de inconsistencias en ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Guardar parámetros en el registro"
-
-msgid "Empirically measure MTU"
-msgstr "Medir MTU empíricamente"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Motor criptográfico por hardware OpenSSL"
-
-msgid "Enable Path MTU discovery"
-msgstr "Detección de MTU"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Modo de encriptado de clave estática (no-TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Activar TLS y asumir el papel de cliente"
-
-msgid "Enable TLS and assume server role"
-msgstr "Activar TLS y asumir el papel de servidor"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Fragmentación de datagramas interna"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Interfaz de gestión en <em>IP</em> <em>puerto</em>"
-
-msgid "Enabled"
-msgstr "Activado"
-
-msgid "Encryption cipher for packets"
-msgstr "Cifra de encriptación de paquetes"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Comandos a ejecutar tras añadir rutas"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Comando a ejecutar si se cambia la IP remota"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-"Ejecutado en modo servidor en nuevas conexiones de clientes, cuando no se "
-"confía aún en el cliente"
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-"Ejecutado en modo servidor cuando una ruta, dirección IPv4 o dirección MAC "
-"se añade a la tabla de rutas interna de OpenVPN"
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Salir si falla la negociación"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Obtener la clave PEM del tty de control antes de demonizar"
-
-msgid "HMAC authentication for packets"
-msgstr "Autentificación HMAC de paquetes"
-
-msgid "Handling of authentication failures"
-msgstr "Gestión de fallos de autentificación"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-"Directriz para simplificar la expresión de --ping y --ping-restart en "
-"configuraciones en modo servido"
-
-msgid "If hostname resolve fails, retry"
-msgstr "Reintentar si falla la resolución de nombre de máquina"
-
-msgid "Instance \"%s\""
-msgstr "Instancia \"%s\""
-
-msgid "Invalid"
-msgstr "No válido"
-
-msgid "Keep local IP address on restart"
-msgstr "Mantener la dirección IP local al rearrancar"
-
-msgid "Keep remote IP address on restart"
-msgstr "Mantener la dirección IP remota al rearrancar"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Mantener el dispositivo TUN/TAP abierto al rearrancar"
-
-msgid "Key transition window"
-msgstr "Ventana de transición de clave"
-
-msgid "Limit repeated log messages"
-msgstr "Limitar mensajes repetidos al registro"
-
-msgid "Local certificate"
-msgstr "Certificado local"
-
-msgid "Local host name or ip address"
-msgstr "Nombre de máquina local o dirección IP"
-
-msgid "Local private key"
-msgstr "Clave privada local"
-
-msgid "Major mode"
-msgstr "Modo principal"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Habilitar IPv6 en dispositivo TUN"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Paquetes máximos en la cola de salida TCP"
-
-msgid "Networking"
-msgstr "Red"
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Número de buffers de propagación"
-
-msgid "Number of lines for log file history"
-msgstr "Líneas en el fichero de registro histórico"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Aceptar solo conexiones desde este nombre X509"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "Procesa solo las esperas a ping si existe la ruta"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Instancias OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Optimizar escrituras TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Escribir en SysLog y no demonizar"
-
-msgid "Overview"
-msgstr "Resumen"
-
-msgid "PKCS#12 file containing keys"
-msgstr "Fichero PKCS#12 de claves"
-
-msgid "Pass environment variables to script"
-msgstr "Pasar variables de entorno al script"
-
-msgid "Persist replay-protection state"
-msgstr "Estado continuo de protección antireproducción"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Mantener/no mantener el listado de interfaces"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Ping al remoto cada n segundos sobre un puerto TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr "Política sobre el uso de programas externos y scripts"
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Proxy timeout in seconds"
-msgstr "Espera del proxy en segundos"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Enviar un opción de ifconfig al puesto remoto"
-
-msgid "Push options to peer"
-msgstr "Enviar opciones al otro"
-
-msgid "Query management channel for private key"
-msgstr "Consulta el canal de gestión por la clave privada"
-
-msgid "Randomly choose remote server"
-msgstr "Elegir aleatoriamente un servidor remoto"
-
-msgid "Refuse connection if no custom client config"
-msgstr "Rechazar conexión si no tiene un fichero de conexión personalizado"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Redirigir señales SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Nombre de máquina remota o dirección IP"
-
-msgid "Remote ping timeout"
-msgstr "Espera a ping remoto"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Bytes tras los que renegociar la clave del canal del datos"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Paquetes tras los que renegociar la clave del canal del datos"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "Segundos tras los que renegociar la clave del canal del datos"
-
-msgid "Replay protection sliding window size"
-msgstr "Tamaño de la ventana deslizante de la protección de reproducción"
-
-msgid "Require explicit designation on certificate"
-msgstr "Designación explícita de certificado"
-
-msgid "Require explicit key usage on certificate"
-msgstr "Clave de uso explícita de certificado"
-
-msgid "Restart after remote ping timeout"
-msgstr "Rearrancar tras espera del ping remoto"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Espera de retransmisión en el canal de control TLS"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Reintentar indefinidamente en errores del proxy HTTP"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Reintentar indefinidamente en errores del proxy Socks"
-
-msgid "Route subnet to client"
-msgstr "Enrutar subred a cliente"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Ejecutar como servidor inetd o xinetd"
-
-msgid "Run script cmd on client connection"
-msgstr "Script a ejecutar tras una conexión de cliente"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Script a ejecutar tras una desconexión de cliente"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Ejecutar scripts de activación/desactivación en todos los rearranques"
-
-msgid "Send notification to peer on disconnect"
-msgstr "Enviar notificación al otro en caso de desconexión"
-
-msgid "Service"
-msgstr "Servicio"
-
-msgid "Set GID to group"
-msgstr "GID del grupo"
-
-msgid "Set TCP/UDP MTU"
-msgstr "MTU TCP/UDP"
-
-msgid "Set UID to user"
-msgstr "UID del usuario"
-
-msgid "Set aside a pool of subnets"
-msgstr "Reservar un bloque de subredes"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Opciones HTTP extendidas del proxy"
-
-msgid "Set output verbosity"
-msgstr "Nivel de detalle de mensajes"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr "Tamaño de las tablas real y virtual de hashes"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Tamaño del búfer de recepción TCP/UDP"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Tamaño del búfer de envío TCP/UDP"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Longitud de la cola de transmisión TUN/TAP"
-
-msgid "Set tun/tap adapter parameters"
-msgstr "Parámetros del adaptador TUN/TAP"
-
-msgid "Set tun/tap device MTU"
-msgstr "MTU del dispositivo TUN/TAP"
-
-msgid "Set tun/tap device overhead"
-msgstr "Sobrecarga del dispositivo TUN/TAP"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Límite superior de MSS de TCP"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Adaptar ancho de banda de clientes"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Comando shell a ejecutar tras abrir el dispositivo TUN"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Comando shell a ejecutar tras cerrar el dispositivo TUN"
-
-msgid "Shell command to verify X509 name"
-msgstr "Comando shell a ejecutar para verificar un nombre X509"
-
-msgid "Silence the output of replay warnings"
-msgstr "No mostrar avisos de reproducción"
-
-msgid "Size of cipher key"
-msgstr "Tamaño de la clave de cifrado"
-
-msgid "Specify a default gateway for routes"
-msgstr "Gateway por defecto"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Arrancar OpenVPN en estado hibernado"
-
-msgid "Start/Stop"
-msgstr "Arrancar/Parar"
-
-msgid "Started"
-msgstr "Arrancado"
-
-msgid "Status file format version"
-msgstr "Versión del formato del fichero de estado"
-
-msgid "Switch to advanced configuration »"
-msgstr "Cambiar a configuración avanzada »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Número de puerto TCP/UDP para local y remoto"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Número de puerto TCP/UDP para local (default=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Número de puerto TCP/UDP para remoto (default=1194)"
-
-msgid "TLS cipher"
-msgstr "Cifra TLS"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "Paso a través TOS (sólo para IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-"Directorio temporal para el fichero de retorno de la conexión del cliente"
-
-msgid "Timeframe for key exchange"
-msgstr "Tiempo de intercambio de clave"
-
-msgid "Type of used device"
-msgstr "Tipo de dispositivo usado"
-
-msgid "Use fast LZO compression"
-msgstr "Compresión rápida LZO"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Direcciones individuales en vez de subredes /30"
-
-msgid "Use protocol"
-msgstr "Protocolo"
-
-msgid "Use tun/tap device node"
-msgstr "Nodo de dispositivo TUN/TAP"
-
-msgid "Use username as common name"
-msgstr "Nombre de usuario como nombre común"
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr "Escribir registro a fichero"
-
-msgid "Write process ID to file"
-msgstr "Escribir ID del proceso a fichero"
-
-msgid "Write status to file every n seconds"
-msgstr "Segundos tras los que escribir el fichero de estado"
-
-msgid "no"
-msgstr "no"
-
-msgid "tun/tap device"
-msgstr "dispositivo TUN/TAP"
-
-msgid "tun/tap inactivity timeout"
-msgstr "Espera de inactividad tun/tap"
-
-msgid "yes (%i)"
-msgstr "sí (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Cambiar a configuración básica"
diff --git a/po/es/p2pblock.po b/po/es/p2pblock.po
deleted file mode 100644
index 1edc533..0000000
--- a/po/es/p2pblock.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-19 16:56+0200\n"
-"PO-Revision-Date: 2012-08-19 16:56+0200\n"
-"Last-Translator: josevteg <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Block Time"
-msgstr "Tiempo de bloqueo"
-
-msgid "Enable P2P-Block"
-msgstr "Activar bloqueo P2P"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Protocolo Layer7"
-
-msgid "P2P-Block"
-msgstr "Bloqueo de P2P"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"El bloqueo de P2P es un mecanismo de lista gris para bloquear varios "
-"protocolos punto a punto a clientes que no están en lista blanca."
-
-msgid "Portrange"
-msgstr "Rango de puertos"
-
-msgid "Whitelisted IPs"
-msgstr "IPs en la lista blanca"
-
-msgid "seconds"
-msgstr "segundos"
diff --git a/po/es/p910nd.po b/po/es/p910nd.po
deleted file mode 100644
index 3e3c30c..0000000
--- a/po/es/p910nd.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-08-19 16:56+0200\n"
-"Last-Translator: josevteg <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Bidirectional mode"
-msgstr "Modo bidireccional"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Debe instalar primero el soporte para puertos USB (kmod-usb-printer) o "
-"paralelo (kmod-lp)."
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Settings"
-msgstr "Configuración"
-
-msgid "TCP listener port."
-msgstr "Puerto de escucha TCP."
-
-msgid "enable"
-msgstr "activar"
-
-msgid "p910nd - Printer server"
-msgstr "Servidor de Impresión - p910nd"
-
-#~ msgid "port_help"
-#~ msgstr "puerto_ayuda"
diff --git a/po/es/pbx-voicemail.po b/po/es/pbx-voicemail.po
deleted file mode 100644
index 384e169..0000000
--- a/po/es/pbx-voicemail.po
+++ /dev/null
@@ -1,106 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-23 22:44+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr "Dirección de correo electrónica que recibe Voicemail"
-
-msgid "Enable Voicemail"
-msgstr "Activar Voicemail"
-
-msgid "Global Voicemail Setup"
-msgstr "Configuración global de Voicemail"
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-"Configure un correo de voz global para esta PBX. Como el sistema está "
-"diseñado para sistemas integrados como routers, no tiene un almacenamiento "
-"local y debe enviarse por correo. Por este motivo debe configurar un "
-"servidor SMTP de correo saliente (como ISP, Google o el correo de Yahoo) y "
-"establecer una lista de direcciones que recibirán el correo de voz grabado."
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-"Para usar esta PBX para enviar correos con grabaciones de correos de voz "
-"tiene que configurar un servidor SMTP. Su ISP es posible que tenga uno. "
-"También puede usar otros como los de Google o Yahoo."
-
-msgid "Last Sent Voicemail Log"
-msgstr "Último registro de Voicemail enviado"
-
-msgid "Local Storage Directory"
-msgstr "Directorio local de almacenamiento"
-
-msgid "No"
-msgstr "No"
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr "Servidor de correo SMTP saliente"
-
-msgid "SMTP Password"
-msgstr "Contraseña SMTP"
-
-msgid "SMTP Port Number"
-msgstr "Número de puerto SMTP"
-
-msgid "SMTP Server Authentication"
-msgstr "Autentificación de servidor SMTP"
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr "Nombre del servidor SMTP o dirección IP"
-
-msgid "SMTP User Name"
-msgstr "Nombre de usuario SMTP"
-
-msgid "Secure Connection Using TLS"
-msgstr "Asegurar la conexión con TLS"
-
-msgid "Voicemail Setup"
-msgstr "Configuración de Voicemail"
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-"Cuando active Voicemail tendrá que especificar direcciones de correo que "
-"recibirán los correos grabados así como un servidor SMTP."
-
-msgid "Yes"
-msgstr "Sí"
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-"También puede guardar copias de los mensajes de Voicemail en el dispositivo. "
-"El camino se creará si no existe. Tenga cuidado de no sobrepasar el espacio "
-"disponible en dispositivos pequeños como routers."
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
-"Su contraseña SMTP real no se muestra. Se cambiará solo cuando cambie el "
-"valor en esta caja."
diff --git a/po/es/pbx.po b/po/es/pbx.po
deleted file mode 100644
index 12ff378..0000000
--- a/po/es/pbx.po
+++ /dev/null
@@ -1,596 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-15 21:43+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Configuración avanzada"
-
-msgid "Available"
-msgstr "Disponible"
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr "Usar sólo caracteres alfanuméricos, espacio, coma y punto."
-
-msgid "Away"
-msgstr "No disponible"
-
-msgid "Blacklisted Numbers"
-msgstr "Lista negra"
-
-msgid "Call Routing"
-msgstr "Enrutado de llamadas"
-
-msgid "Call-through Numbers"
-msgstr "Números call-through"
-
-msgid "Copy-paste large lists of numbers here."
-msgstr "Pegue aquí grandes listas de números."
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-"Números a los que se permite llamar por este sistema y privilegios de "
-"usuario."
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr "Marca el resto de números en cualquier lugar"
-
-msgid "Do Not Disturb"
-msgstr "No molestar"
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr "Dominio/Dirección IP/Dominio dinámico"
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr "Lista dinámica de números en lista negra"
-
-msgid "Email"
-msgstr "e-mail"
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr "Permitir llamadas entrantes (registrar vía SIP)"
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr "Permitir llamadas entrantes (ver estado abajo)"
-
-msgid "Enable Outgoing Calls"
-msgstr "Permitir llamadas salientes"
-
-msgid "Enabled"
-msgstr "Activado"
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-"Números de teléfono de los que se reclina la llamada automáticamente. Es "
-"posible que tenga que omitir el código de país y ceros precedentes, pero "
-"experimente para asegurarse que bloquea los números correctamente."
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-"Ponga esta IP (o IP:puerto) en el parámetro Servidor/Registrador de los "
-"dispositivos SIP que usará SOLO localmente y nunca desde una posición remota."
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-"Ponga este nombre de máquina en el parámetro Servidor/Registrador de los "
-"dispositivos SIP que usará desde posiciones remotas (también vale "
-"localmente)."
-
-msgid "External SIP Port"
-msgstr "Puerto externo SIP"
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-"Para cada proveedor al que se habilita a hacer llamadas entrantes puede "
-"restringir a qué usuarios llamar. Si se deja vacío el sistema indicará que "
-"llamará a todos los usuarios que puedan recibir llamadas entrantes. Los "
-"nombres de usuario no válidos se rechazarán sin aviso. Estos nombres de "
-"usuario hacen ignorar la configuración de usuario de no recibir llamadas. De "
-"esta manera puede hacer que a ciertos usuarios sólo les llamen ciertos "
-"proveedores. Puede separar los nombres con espacios o poniéndolos en líneas "
-"diferentes."
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-"Para cada usuario habilitado a hacer llamadas salientes puede restringir qué "
-"proveedores usar. Por defecto todos los usuarios pueden usar a todos los "
-"proveedores. Para mostrarse en la lista el usuario debe poder hacer llamadas "
-"salientes (ver página \"Cuentas de usuario\"). Ponga los proveedores en "
-"formato username@some.host.name igual que se listan en \"Llamadas salientes"
-"\" arriba. Los nombres no válidos se rechazarán sin aviso.Puede separar los "
-"nombres con espacios o poniéndolos en líneas diferentes."
-
-msgid "Full Name"
-msgstr "Nombre completo"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "Google Accounts"
-msgstr "Cuentas en google"
-
-msgid "Google Talk Status"
-msgstr "Estado de Google Talk"
-
-msgid "Google Talk Status Message"
-msgstr "Mensaje de estado de Google Talk"
-
-msgid "Google Voice/Talk Accounts"
-msgstr "Cuentas Google Voice/Talk"
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-"Configure una cuenta SIP que usará para conectar con este servicio. Úsela "
-"tanpo en un adaptador de telefonía analógico (ATA) o en un programa SIP como "
-"CSipSimple, Linphone, o Sipdroid para smartphones, o Ekiga, Linphone, o X-"
-"Lite para ordenadores. Por defecto, todas las cuentas SIP sonarán a la vez "
-"si se hace una llamada desde una de las cuentas de su proveedor de VoIP o "
-"números GV."
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-"Si la configuración Servidor/Registrador en %s o %s no le funciona, prueba a "
-"poner %s o %s e introduzca este número de puerto en un campo separado que "
-"especifique el número de puerto del Servidor/Registrador. Algunos "
-"dispositivos tienen una configuración extraña que muestra este puerto desde "
-"el que el SIP origina peticiones en el mismo dispositivo SIP (el puerto "
-"asociado). El puerto que está configurando aquí NO es este puerto asociado "
-"sino el puerto en el que el servicio escucha."
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-"Si nota saltos o retrasos en el audio mientras realiza descargas puede "
-"querer activar QoS. QoS prioriza el tráfico a y desde su red para ciertos "
-"puertos y direcciones IP mejorando la latencia y el rendimiento del sonido "
-"en dicho caso. Al activarlo el PBX creará una regla QoS para este servicio, "
-"pero deberá rellenar en la página de configuración de QoS (Red/QoS) otros "
-"parámetros necesarios como la velocidad de subida y la de bajada."
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-"Si tiene más de una cuenta para hacer llamadas salientes, debe introducir "
-"una lista de números de teléfono y/o prefijos para cada proveedor. Los "
-"prefijos no válidos se rechazarán sin aviso y solo son caracteres válidos 0-"
-"9, X, Z, N, #, *, y +. La letra X equivale a 0-9, Z a 1-9 y N a 2-9. Por "
-"ejemplo para hacer llamadas a Alemania con su proveedor debe introducir 49. "
-"Para hacer llamadas a Estados Unidos 1NXXNXXXXXX. Si uno de sus proveedores "
-"puede hacer llamadas locales a un código de área como el 646 de Nueva York "
-"debe introducir 646NXXXXXX para ese proveedor. Debería dehar una cuenta con "
-"una lista vacía para que haga las llamadas por defecto en caso de que ningún "
-"prefijo encaje. El sistema reemplazará automáticamente la lista vacía con el "
-"mensaje de que el proveedor marca todos los números que no estén en los "
-"prefijos de otros proveedores. Sea todo lo específico que pueda (ej. "
-"1NXXNXXXXXX es mejor que 1). Todos los códigos internaciones de marcado se "
-"descartan (ej. 00, 011, 010, 0011). Las entradas pueden ser una lista "
-"separada por espacios y/o cambios de línea."
-
-msgid "Incoming Calls"
-msgstr "Llamadas entrantes"
-
-msgid "Insert QoS Rules"
-msgstr "Reglas QoS"
-
-msgid "Makes Outgoing Calls"
-msgstr "Realizar llamadas salientes"
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr "NOTA: Sin cuentas configuradas de Google o porveedor SIP."
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-"NOTA: Sin cuentas configuradas de Google o porveedor SIP para llamadas "
-"entrantes."
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-"NOTA: Sin cuentas configuradas de Google o porveedor SIP para llamadas "
-"salientes."
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr "NOTA: Sin cuentas locales configuradas."
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr "NOTA: Sin cuentas locales habilitadas para llamadas saientes."
-
-msgid "No"
-msgstr "No"
-
-msgid "Number of Seconds to Ring"
-msgstr "Número de segundos a sonar"
-
-msgid "Outbound Proxy"
-msgstr "Proxy saliente"
-
-msgid "Outgoing Calls"
-msgstr "Llamadas salientes"
-
-msgid "PBX Main Page"
-msgstr "Página principal de PBX"
-
-msgid "PBX Service Status"
-msgstr "Estado del servicio PBX"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "Password"
-msgstr "Contraseña"
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-"Puerto aleatorio entre 6500 y 9500 en el que escuche el servicio. No elija "
-"el estándar 5060 porque es susceptible de ataques por fuerza bruta. Cuando "
-"termine (1) pulsa \"Salvar y aplicar\" y (2) pulse \"Rearrancar servicio VoIP"
-"\". Finalmente (3) busque en la sección \"Dispositivo SIP/Cuentas softphone"
-"\" la configuración del puerto."
-
-msgid "Port Setting for SIP Devices"
-msgstr "Configuración de puerto para dispositivos SIP"
-
-msgid "Providers Used for Outgoing Calls"
-msgstr "Proveedores usados para llamadas salientess"
-
-msgid "QoS Settings"
-msgstr "Configuración de QoS"
-
-msgid "RTP Port Range End"
-msgstr "Fin del rango de puertos RTP"
-
-msgid "RTP Port Range Start"
-msgstr "Inicio del rango de puertos RTP"
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-"El tráfico RTP es el que lleva los paquetes de voz. Este es el inicio del "
-"rango de puertos que se usará para comunicaciones RTP. Suele ser correcto "
-"dejar el valor por defecto."
-
-msgid "Receives Incoming Calls"
-msgstr "Recibe llamadas entrantes"
-
-msgid "Remote Usage"
-msgstr "Uso remoto"
-
-msgid "Rings users enabled for incoming calls"
-msgstr "Llama a usuarios habilitados a recibir llamadas"
-
-msgid "SIP Accounts"
-msgstr "Cuentas SIP"
-
-msgid "SIP Device/Softphone Accounts"
-msgstr "Dispositivo SIP/Cuentas Softphone"
-
-msgid "SIP Provider Accounts"
-msgstr "Cuentas del proveedor SIP"
-
-msgid "SIP Realm (needed by some providers)"
-msgstr "Ámbito SIP (necesario para algunos proveedores)"
-
-msgid "SIP Server/Registrar"
-msgstr "Servidor/Registrador del SIP"
-
-msgid "SIP Server/Registrar Port"
-msgstr "Puerto del Servidor/Registrador del SIP"
-
-msgid "Server Setting"
-msgstr "Configuración del servidor"
-
-msgid "Server Setting for Local SIP Devices"
-msgstr "Dispositivos SIP locales"
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr "Dispositivos SIP remotos"
-
-msgid "Service Status"
-msgstr "Estado del servicio"
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-"Segundos que se llamará a los usuarios antes de colgar o pasar a correo voz "
-"(si el correo voz está instalado y habilitado)."
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr "Lista negra (separar números con espacios)"
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr "Números individuales. Pulse enter para añadir más."
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-"Estos números podrán llamar con los proveedores de este usuario. Los nombres "
-"de usuario no válidos se descartan sin aviso. Por favor, verifique que los "
-"números se aceptan."
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-"Aquí puede configurar un servicio de sistema telefónico (PBX) que le "
-"permitirá hacer llamadas por múltiples cuentas Google y SIP (como Sipgate, "
-"SipSorcery, and Betamax) y compartirlas entre muchos dispositivos SIP. Tenga "
-"en cuenta que las cuentas Google, SIP y locales deben configurarse en "
-"subsecciones diferentes. Debe añadir al menos una cuenta de usuarioa este "
-"PBX y configurar un dispositivo SIP o softphone para usarla para recibir las "
-"llamadas de sus cuentas Google/SIP. Configurar múltiples usuarios le "
-"permitirá hacer llamadas gratuitas entre los usuarios y compartir las "
-"cuentas Google/SIP configuradas. Si tiene más de una cuenta Google/SIP "
-"configurada tendrá que configurar cómo se enrutan en la página \"Enrutado de "
-"llamadas\". Si está interesado en usar su PBX desde cualquier sitio del "
-"mundo puede visitar la sección \"Uso remoto\" en la página \"Configuración "
-"avanzada\"."
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-"Nombre del servidor VoIP que usará para identificarse cuando se registre en "
-"proveedores de VoIP (SIP). Algunos requieres que sea una cadena específica a "
-"una dispositivo hardware."
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-"Indique las cuentas Google/SIP que usará para llamar a qué códigos de país/"
-"zona, qué usuarios pueden usuarios pueden usar qué cuentas SIP/Google y cómo "
-"se enrutan las llamadas entrantes, qué números pueden entrar en esta PBX con "
-"una contraseña y qué números están en lista negra."
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-"Configure sus cuentas Google (Talk y Voz) para empezar a usarlas para hacer "
-"y recibir llamadas (chat de voz y teléfono real). Haga al menos una llamada "
-"de voz con el plugin de Google Talk (instalable desde GMail) y desconéctese "
-"de la cuenta en cualquier otro sitio."
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-"Configure sus cuentas SIP (VoIP) como Sipgate, SipSorcery, los popular "
-"proveedores Betamax y cualquier otro proveedor para empezar a usarlos para "
-"hacer y recibir llamadas (uri SIP y teléfono real)."
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-"Debería ser \"Sí\" si tiene un DID (teléfono real) asociado a esta cuenta "
-"SIP o quiere recibir llamads uri SIP de este proveedor."
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-"Algunos de estos parámetros no suele ser necesario cambiarlos. Además puede "
-"configurar su sistema para usar con dispositivos SIP remotos y resolver "
-"problemas de calidad de llamada habilitando algunas reglas QoS."
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-"Use nombre de usuario númericos (cuatro o cinco dígitos) si conecta a "
-"teléfonos normales con ATAs a este sistema (para que puedan marcar números "
-"de usuario)."
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-"Cuenta para llamadas salientes como se configura en la sección \"Enrutado de "
-"llamadas\"."
-
-msgid "Use this account to make outgoing calls."
-msgstr "Cuenta para llamadas salientes."
-
-msgid "User Accounts"
-msgstr "Cuentas de usuario"
-
-msgid "User Agent String"
-msgstr "Cadena \"User Agent\""
-
-msgid "User Name"
-msgstr "Nombre de usuario"
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr "Usar proveedores habilitados para llamadas salientes"
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-"Cuando alguien inicia un chat de voz con su cuenta de GTalk o llame al "
-"número de GVoice (si tiene Google Voice) la llamada se transferirá a "
-"cualquier usuario que esté conectado (registrado usando un dispositivo SIP o "
-"softphone) y se le permitirá recibir la llamada. Si tiene Google Voice debe "
-"ir a la configuración de GVoice y traspasar las llamadas a Google chat para "
-"recibir las hechas a si número de GVoice. Si tiene problemas recibiendo "
-"llamadas de GVoice pruebe con la opción \"Call Screening\" en la "
-"configuración de GVoice. Asegúrese de que ningún otro cliente esté conectado "
-"con esta cuenta (navegador en gmail, o una aplicación para móvil o "
-"escritorio) ya que podría interferir."
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-"Cuando se salve su contraseña desaparece de este campo y no se muestra para "
-"su seguridad. La contraseña sólo se podrá cambiar si introduce un valor "
-"diferente al salvado."
-
-msgid "Yes"
-msgstr "Sí"
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-"Nombre de dominio, dirección IP externa o nombre de dominio dinámico. Si su "
-"dirección IP es dinámica y cambia su configuración podría resultar no "
-"válida. Se recomienda el uso de DNS dinámico en estos casos."
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr "Nombre real a mostrar en el \"Caller ID\"."
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-"Puede usar sus dispositivos SIP/softphones con este sistema desde una "
-"ubicación remota mientras su proveedor de internet le dé una dirección IP "
-"pública. Podrá llamar a usuarios locales gratis (ej. otros adaptadores de "
-"teléfonos analógicos) y podrá usar sus proveedores de VoIP para hacer "
-"llamadas como si estuviese en su PBX local. Tras configurar esta pestaña "
-"vuelva a la configuración de usuarios y veo el nuevo servidor y puerto que "
-"debe configurar en sus dispositivos SIP remotos. Tenga en cuenta que si este "
-"PBX no funciona en su router/pasarela, tendrá que configurar el traspaso de "
-"puertos (NAT) en su router/pasarela. Traspase los puertos indicados (Puerto "
-"SIP y rango RTP) hacia la dirección IP del dispositivo en que corre esta PBX."
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-"Su PIN desaparecerá cuando se salve para su protección. Se cambiará solo "
-"cuando introduzca un valor diferente al salvado. No se puede dejar el PIN "
-"vacío."
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-"Su contraseña desaparecerá cuando se salve para su protección. Sólo se puede "
-"cambiar si entra un valor diferente al salvado."
diff --git a/po/es/polipo.po b/po/es/polipo.po
deleted file mode 100644
index 84ba24e..0000000
--- a/po/es/polipo.po
+++ /dev/null
@@ -1,307 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-02 08:33+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Configuración Avanzada"
-
-msgid "Allowed clients"
-msgstr "Clientes permitos"
-
-msgid "Always use system DNS resolver"
-msgstr "Usar siempre el DNS del sistema"
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Autenticación soportada: Basic HTTP. Provee del nombre de usuario y "
-"contraseña in el formato username:password."
-
-msgid "Configuration"
-msgstr "Configuración"
-
-msgid "DNS and Query Settings"
-msgstr "Configuración de DNS y consultas"
-
-msgid "DNS server address"
-msgstr "Dirección del servidor DNS"
-
-msgid "Delete cache files time"
-msgstr "Tiempo para eliminar archivos de cache"
-
-msgid "Disk cache location"
-msgstr "Ubicación de la caché de disco"
-
-msgid "Do not query IPv6"
-msgstr "No consultar IPv6"
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Activar si la cache (proxy) es compartida por múltiples usuarios."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Tamaño del primer segmento PMM (en bytes)"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Cuánta RAM debe usar Polipo como caché."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "Tamaño (en bytes) de la cache en RAM"
-
-msgid "Listen address"
-msgstr "Dirección de escucha"
-
-msgid "Listen port"
-msgstr "Puerto de escucha"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Ubicación en la que Polipo creará archivos permanentemente. Se recomienda el "
-"uso de dispositivos de almacenamiento externo, ya que la caché puede "
-"aumentar considerablemente. Deje en blanco para desactivar la caché en disco."
-
-msgid "Log file location"
-msgstr "Ubicación del archivo de registro"
-
-msgid "Log to syslog"
-msgstr "Registrar en syslog"
-
-msgid "Logging and RAM"
-msgstr "Registro y RAM"
-
-msgid "Never use system DNS resolver"
-msgstr "Nunca usar el DNS del sistema"
-
-msgid "On-Disk Cache"
-msgstr "Cache en disco"
-
-msgid "PMM segments size (in bytes)"
-msgstr "Tamaño de segmentos PMM (en bytes)"
-
-msgid "Parent Proxy"
-msgstr "Proxy padre"
-
-msgid "Parent proxy address"
-msgstr "Dirección del proxy padre"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Dirección del proxy padre (en formato máquina:puerto), al cual Polipo "
-"traspasará las peticiones."
-
-msgid "Parent proxy authentication"
-msgstr "Autentificación con el proxy padre"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr "Estado de Polipo"
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipo es un servidor proxy web pequeño y rápido."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Multiplexación Poor Man's"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"La Multiplexación Poor Man's (PMM) simula multiplexación solicitando una "
-"instancia en múltiples segmentos. Intenta reducir la latencia provocada por "
-"la debilidad del protocolo HTTP. NOTA: algunos sitios pueden no funcionar "
-"con PMM habilitado."
-
-msgid "Port on which Polipo will listen"
-msgstr "Puerto de escucha de Polipo"
-
-msgid "Proxy"
-msgstr "Proxy"
-
-msgid "Query DNS by hostname"
-msgstr "Consultar DNS por nombre de máquina"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr "Consultar DNS directamente y si falla probar con el del sistema"
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-"Consultar DNS directamente y para máquinas desconocidas probar con el del "
-"sistema"
-
-msgid "Query DNS for IPv6"
-msgstr "Consulta DNS para IPv6"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr "Consultar IPv4 e IPv6, pero mejor IPv4"
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr "Consultar IPv4 e IPv6, pero mejor IPv6"
-
-msgid "Query only IPv6"
-msgstr "Consultar solo IPv6"
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Indique la dirección del servidor DNS a utilizar, si prefiere que Polipo "
-"utilice una dirección para el servidor DNS distinta al utilizado en el "
-"sistema."
-
-msgid "Shared cache"
-msgstr "Cache compartida"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Tamaño del primer segmento PMM. Si no se encuentra definido, su valor por "
-"defecto es el doble del tamaño del segmento PMM."
-
-msgid "Size to which cached files should be truncated"
-msgstr "Tamaño máximo de los ficheros caché"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Syslog facility"
-msgstr "Utilidad Syslog"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"Interfaz de escucha de Polipo. Para hacerlo en todas utilice 0.0.0.0 o :: "
-"(IPv6)."
-
-msgid "Time after which cached files will be deleted"
-msgstr "Tiempo tras el que se borrarán los ficheros en caché"
-
-msgid "Time after which cached files will be truncated"
-msgstr "Tiempo tras el que se truncarán los ficheros en caché"
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-"Para activar PMM, el tamaño de segmento PMM debe tener un valor positivo."
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Truncar el tamaño del archivo de la cache (en bytes)"
-
-msgid "Truncate cache files time"
-msgstr "Truncar tiempos en el archivo de cache"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"El uso de un dispositivo externo de almacenamiento es recomendado, debido a "
-"que el archivo log es escrito con mucha frecuencia y el mismo puede "
-"incrementar su tamaño de forma considerable."
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-"Si la dirección de escucha es 0.0.0.0 o :: (IPv6), debe listar a los "
-"clientes a los que se permitirá conectar. El formato es dirección IP o "
-"dirección de red (192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-
-msgid "enable"
-msgstr "activar"
-
-#~ msgid ""
-#~ "To enable polipo on-disk cache cleaning (highly recommended), you should "
-#~ "add a cron job in Scheduled Tasks services that will execute /usr/sbin/"
-#~ "polipo_purge script. For example to perform disk cache cleanup every day "
-#~ "at 6:00 in the morning you should add the following line in Scheduled "
-#~ "Tasks \"0 6 * * *\\t/usr/sbin/polipo_purge\" (without quotes)."
-#~ msgstr ""
-#~ "Para activar la limpieza de la cache en disco polipo (recomendada), se "
-#~ "recomienda agregar un trabajo al cron in los Servicios de Tareas "
-#~ "Programadas el cual ejecutará el script /usr/sbin/polipo_purge. Por "
-#~ "ejemplo para ejecutar una limpieza de la cache de disco todos los días a "
-#~ "las 6:00 a.m. deberá agregar la siguiente línea en el Servicio de Tareas "
-#~ "Programadas.-&amp;quot;0 6 * * * /usr/sbin/polipo_purge&amp;quot; (sin "
-#~ "las comillas)."
-
-#~ msgid ""
-#~ "Size to which cached files should be truncated. (default value: 1048576)"
-#~ msgstr ""
-#~ "Tamaño del archivo sobre el cual la cache deberá ser truncada. (valor por "
-#~ "defecto: 1048576)"
-
-#~ msgid ""
-#~ "Time after which cached files will be truncated. (default value: 4d12h)"
-#~ msgstr ""
-#~ "Tiempo transcurrido necesario antes de truncar los archivos cacheado. "
-#~ "(valor por defecto: 4d12h)"
-
-#~ msgid "Time after which cached files will be deleted. (default value: 32d)"
-#~ msgstr ""
-#~ "Tiempo transcurrido necesario antes de eliminar los archivos en la cache. "
-#~ "(valor por defecto: 32d)"
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-#~ "that are allowed to connect. The format is IP address or network address "
-#~ "(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-#~ msgstr ""
-#~ "Cuando la dirección a escuchar es establecida en 0.0.0.0 or :: (en caso "
-#~ "de utilizar IPv6), deberá listar los clientes que se encuentran permitos "
-#~ "a conectarse. El formato a utilizar deberá indicarse con la dirección IP "
-#~ "o bien la dirección de Red.Por ejemplo: (192.168.1.123, 192.168.1.0/24, "
-#~ "2001:660:116::/48 (IPv6))."
-
-#~ msgid ""
-#~ "false = Do not query IPv6; reluctantly = Query both, prefer IPv4; happily "
-#~ "= Query both, prefer IPv6; true = Query only IPv6"
-#~ msgstr ""
-#~ "false = No consulta IPv6, reluctantly = Consulta ambos, preferencia IPv4; "
-#~ "happily = Consulta ambos, preferencia IPv6; true = Consulta sólamente IPv6"
-
-#~ msgid ""
-#~ "false = Never use system DNS resolver; reluctantly = Query DNS directly, "
-#~ "if DNS server is unavailable fail to system DNS resolver; happily = Query "
-#~ "DNS directly, if host could not be found fallback to system DNS resolver; "
-#~ "true = Always use system DNS resolver"
-#~ msgstr ""
-#~ "false = Nunca use el sistema de resolución de DNS, reluctantly = "
-#~ "Consultar DNS directamente, si el servidor DNS no está disponible al "
-#~ "utilizar el sistema de resolución de DNS, hapilly = Consultar DNS "
-#~ "directamente, si el host no se pudo encontrar volver al sistema de "
-#~ "resolución de DNS; true = Siempre use el sistema de resolución de DNS"
-
-#~ msgid "Port on which Polipo will listen. (default value: 8123)"
-#~ msgstr "Puerto de escucha que Polipo utilizará. (valor por defecto: 8123)"
-
-#~ msgid "polipo_pmm_pmmsize_desc"
-#~ msgstr ""
-#~ "Para activar PMM, el tamaño del segmento PMM debe ser establecido a un "
-#~ "valor mayor a 0 (valor positivo)."
diff --git a/po/es/qos.po b/po/es/qos.po
deleted file mode 100644
index dcd9e86..0000000
--- a/po/es/qos.po
+++ /dev/null
@@ -1,120 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-09-01 20:08+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "Calcular sobrecarga"
-
-msgid "Classification Rules"
-msgstr "Reglas de clasificación"
-
-msgid "Classification group"
-msgstr "Grupo de clasificación"
-
-msgid "Destination host"
-msgstr "Máquina de destino"
-
-msgid "Downlink"
-msgstr "Enlace de bajada"
-
-msgid "Download speed (kbit/s)"
-msgstr "Velocidad de descarga (Kbit/s)"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Half-duplex"
-msgstr "Semi dúplex"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internet Connection"
-msgstr "Conexión a Internet"
-
-msgid "Number of bytes"
-msgstr "Número de bytes"
-
-msgid "Ports"
-msgstr "Puertos"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "Calidad de Servicio"
-
-msgid "Service"
-msgstr "Servicio"
-
-msgid "Source host"
-msgstr "Máquina origen"
-
-msgid "Target"
-msgstr "Objetivo"
-
-msgid "Uplink"
-msgstr "Enlace de subida"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Velocidad de subida (Kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Con QoS puede priorizar el tráfico de la red seleccionando por direcciones, "
-"puertos o servicios."
-
-msgid "all"
-msgstr "todos"
-
-msgid "allf"
-msgstr "-- ¿allf? --"
-
-msgid "default"
-msgstr "por defecto"
-
-msgid "express"
-msgstr "exprés"
-
-msgid "low"
-msgstr "bajo"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "prioritario"
-
-msgid "qos_connbytes"
-msgstr "-- ¿qos_connbytes? --"
-
-#~ msgid "Prioritization"
-#~ msgstr "Priorización"
-
-#~ msgid "source network / source host"
-#~ msgstr "red de origen / host de origen"
-
-#~ msgid "target network / target host"
-#~ msgstr "red de destino / host de destino"
-
-#~ msgid "portrange"
-#~ msgstr "rango de puerto"
-
-#~ msgid "Bytes sent"
-#~ msgstr "Bytes enviados"
diff --git a/po/es/radvd.po b/po/es/radvd.po
deleted file mode 100644
index 8656192..0000000
--- a/po/es/radvd.po
+++ /dev/null
@@ -1,412 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-26 17:12+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: German\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "6to4 interface"
-msgstr "Interfaz 6a4"
-
-msgid "Address"
-msgstr "Dirección"
-
-msgid "Addresses"
-msgstr "Direcciones"
-
-msgid "Advanced"
-msgstr "Avanzado"
-
-msgid "Advertise Home Agent flag"
-msgstr "Publicar marca de agente personal"
-
-msgid "Advertise router address"
-msgstr "Publicar dirección del router"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Publicar sufijos de dominio"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"RDNSS IPv6 publicado. Dejar en blanco para usar la dirección IPv6 de la "
-"interfaz"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Prefijo IPv6 publicado"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Prefijos IPv6 publicados. Dejar en blanco para usar el propio del interfaz"
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "Publica aptitudes móviles IPv6 del Home Agent (RFC3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr "Publica las aptitudes de registro del router móvil"
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-"Publica el alcance asumido en milisegundos de los vecinos en la RA si se "
-"especifica. 0 para desactivar"
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-"Publica la cuenta de saltos para paquetes salientes en el RA. Desactivar con "
-"0"
-
-msgid "Advertises the default router preference"
-msgstr "Publica la preferencia de router por defecto"
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr "Publica el MTU del enlace en la RA si se especifica. Desactivar con 0"
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-"Publica el tiempo de vida en segundos que se prefieren las direcciones "
-"generadas desde el prefijo vía una dirección de autoconfiguración sin estado."
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-"Publica el tiempo en segundos que el prefijo es válido para determinar que "
-"el enlace está activo."
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-"Publica tiempo de vida del router por defecto en segundos. 0 si el router no "
-"lo es"
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-"Publica tiempo en segundos que router ofrece servicios de Home Agent para "
-"IPv6 móvil"
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-"Publicar el tiempo de espera en milisegundos entre mensajes de solicitud de "
-"vecinos en la RA. Desactivar con 0"
-
-msgid "Advertising"
-msgstr "Publicación"
-
-msgid "Autonomous"
-msgstr "Autónomo"
-
-msgid "Clients"
-msgstr "Clientes"
-
-msgid "Configuration flag"
-msgstr "Marca de configuración"
-
-msgid "Current hop limit"
-msgstr "Límite de saltos actual"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "Configuración DNSSL"
-
-msgid "Default lifetime"
-msgstr "Vida por defecto"
-
-msgid "Default preference"
-msgstr "Preferencia por defecto"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Enable advertisements"
-msgstr "Activar publicaciones"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "Activar publicaciones y solicitudes de router"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr "Activa el protocolo adicional de autoconfiguración de estado (RFC2462)"
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-"Activa la configuración de información adicional que no sea de dirección "
-"(RFC2462)"
-
-msgid "General"
-msgstr "General"
-
-msgid "Home Agent information"
-msgstr "Información del \"Home Agent\""
-
-msgid "Home Agent lifetime"
-msgstr "Vida del \"Home Agent\""
-
-msgid "Home Agent preference"
-msgstr "Preferencia del \"Home Agent\""
-
-msgid "Include Home Agent Information in the RA"
-msgstr "Incluir información del \"Home Agent\" en el RA"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr "Incluir la opción de publicación móvil IPv6 a RA"
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-"Incluye la dirección de capa de enlace para el interfaz saliente en la RA"
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-"Se enviará la dirección del interfaz en vez del prefijo de red tal y como se "
-"requiere par IPv6 móvil"
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-"El enlace inferior no puede hacer redifusión, no se pueden enviar "
-"publicaciones no solicitadas"
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-"Este prefijo se puede usar como una dirección autónoma de configuración "
-"(RFC4862)"
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-"Este prefijo se puede usar para determinación de enlace activado (RFC4861)"
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid "Interface Configuration"
-msgstr "Configuración de la interfaz"
-
-msgid "Interface required"
-msgstr "Se necesita una interfaz"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Lifetime"
-msgstr "Vida"
-
-msgid "Link MTU"
-msgstr "MTU del enlace"
-
-msgid "Managed flag"
-msgstr "Marca de gestionado"
-
-msgid "Max. interval"
-msgstr "Intervalo máximo"
-
-msgid "Maximum advertisement interval"
-msgstr "Intervalo máximo de publicación"
-
-msgid "Minimum advertisement delay"
-msgstr "Retraso mínimo de publicación"
-
-msgid "Minimum advertisement interval"
-msgstr "Intervalo mínimo de publicación"
-
-msgid "Mobile IPv6"
-msgstr "IPv6 móvil"
-
-msgid "Mobile IPv6 interval option"
-msgstr "Opción de intervalo móvil IPv6"
-
-msgid "Mobile IPv6 router registration"
-msgstr "Registro de router móvil IPv6"
-
-msgid "Multicast"
-msgstr "Multidifusión"
-
-msgid "On-link"
-msgstr "Enlace activado (On-link)"
-
-msgid "On-link determination"
-msgstr "Determinar enlace activado"
-
-msgid "Preference"
-msgstr "Preferencia"
-
-msgid "Preferred lifetime"
-msgstr "Duración de vida preferida"
-
-msgid "Prefix"
-msgstr "Prefijo"
-
-msgid "Prefix Configuration"
-msgstr "Configuración del prefijo"
-
-msgid "Prefixes"
-msgstr "Prefijos"
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr "Configuración RDNSS"
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr "Radvd - DNSSL"
-
-msgid "Radvd - Interface %q"
-msgstr "Radvd - Interfaz %q"
-
-msgid "Radvd - Prefix"
-msgstr "Radvd - Prefijo"
-
-msgid "Radvd - RDNSS"
-msgstr "Radvd - RDNSS"
-
-msgid "Radvd - Route"
-msgstr "Radvd - Ruta"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-"Radvd es un demonio de publicación de enrutado de para IPv6. Atiende "
-"solicitudes de ruta y envía anuncios de ruta como se describe en RFC4861."
-
-msgid "Reachable time"
-msgstr "Tiempo alcanzable"
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-"Restringir comunicaciones a estos clientes, dejar en blanco para "
-"multidifusión"
-
-msgid "Retransmit timer"
-msgstr "Retraso de retransmisión"
-
-msgid "Route Configuration"
-msgstr "Configuración de rutas"
-
-msgid "Routes"
-msgstr "Rutas"
-
-msgid "Source link-layer address"
-msgstr "Dirección origen de enlace de red"
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-"Nombre lógicos del interfaz del que derivar un prefijo 6to4. La dirección "
-"IPv4 pública del interfaz se combina con 2002::/3 y el valor de la opción "
-"\"prefijo\""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr "Tiempo de vida asociado a la ruta en segundos."
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr "Nombre del interfaz lógico al que pertenece esta sección"
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-"Máximo tiempo que las entradas DNSSL se usan para resolución de nombres."
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-"Máximo tiempo que las entradas RDNSS se usan para resolución de nombres."
-
-msgid "Specifies the preference associated with the default router"
-msgstr "Preferencia asociada con el router por defecto"
-
-msgid "Suffix"
-msgstr "Sufijo"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Máximo tiempo en segundos entre envíos de publicaciones multidifusión desde "
-"el interfaz"
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-"Mínimo tiempo en segundos entre envíos de publicaciones multidifusión desde "
-"el interfaz"
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Mínimo tiempo en segundos entre envíos de publicaciones multidifusión no "
-"solicitadas desde el interfaz"
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr "Preferencia que el Home Agent enviará a esta RA"
-
-msgid "Timing"
-msgstr "Temporización"
-
-msgid "Unicast only"
-msgstr "Solo unidifusión"
-
-msgid "Valid lifetime"
-msgstr "Tiempo de vida válido"
-
-msgid "Validity time"
-msgstr "Tiempo de validez"
-
-msgid "default"
-msgstr "por defecto"
-
-msgid "high"
-msgstr "alto"
-
-msgid "low"
-msgstr "bajo"
-
-msgid "medium"
-msgstr "medio"
-
-msgid "no"
-msgstr "no"
-
-msgid "yes"
-msgstr "sí"
diff --git a/po/es/rrdtool.po b/po/es/rrdtool.po
deleted file mode 100644
index 3cf27a2..0000000
--- a/po/es/rrdtool.po
+++ /dev/null
@@ -1,360 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-04-16 01:53+0200\n"
-"Last-Translator: Jose <jarre2_es_jose@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Wireless - Relación señal/ruido"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Nivel de Ruido"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Fuerza de la señal"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Wireless - Calidad de la señal"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Calidad de señal"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: Tiempo de respuesta ICMP"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Firewall - Paquetes Procesados"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "Paquetes/s"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Cadena \\\"%di\\\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - Traslado en %pi"
-
-# Bytes/s
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "Bytes/s"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Bytes (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - Paquetes en %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "Paquetes/s"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Procesado (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Descartados (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Errores (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - Multicast en %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "Paquetes/s"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Paquetes"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - Colisiones en %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "Colisiones/s"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Colisiones"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - Errores en %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "Errores/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Procesos"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Procesos/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Proceso %pi -tiempo de cpu utilizado"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffies"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "sistema"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "usuario"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Procesos %pi - Hilos y procesos"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "contar"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Procesos %pi - página de errores"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Pagina de errores"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "Página de errores"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Proceso %pi - tamaño de la memoria virtual"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bytes"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "Memoria Virtual"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Uso en el procesador #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Transferencia en %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "Bytes/s"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Paquetes en %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "Paquetes/s"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: Conexiones TCP en el Puerto %pi"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "Conexiones/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Uso de espacio de disco en %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Bytes"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: Interrupciones"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "cuestiones/s"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: Carga de sistema"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Carga"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 minuto"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 minutos"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 minutos"
diff --git a/po/es/samba.po b/po/es/samba.po
deleted file mode 100644
index 950a817..0000000
--- a/po/es/samba.po
+++ /dev/null
@@ -1,92 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-08-22 17:45+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow guests"
-msgstr "Permitir invitados"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Permitir a los usuarios acceder a sus directorios de inicio vía "
-"comparticiones de red"
-
-msgid "Allowed users"
-msgstr "Usuarios permitidos"
-
-msgid "Create mask"
-msgstr "Crear máscara"
-
-msgid "Description"
-msgstr "Descripción"
-
-msgid "Directory mask"
-msgstr "Máscara de directorio"
-
-msgid "Edit Template"
-msgstr "Editar plantilla"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Editar la plantilla usada para generar la configuración de samba."
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "Hostname"
-msgstr "Nombre de máquina"
-
-msgid "Mask for new directories"
-msgstr "Máscara para directorios nuevos"
-
-msgid "Mask for new files"
-msgstr "Máscara para archivos nuevos"
-
-msgid "Name"
-msgstr "Nombre"
-
-msgid "Network Shares"
-msgstr "Comparticiones de red"
-
-msgid "Path"
-msgstr "Dirección"
-
-msgid "Read-only"
-msgstr "Solo lectura"
-
-msgid "Share home-directories"
-msgstr "Compartir directorios personales"
-
-msgid "Shared Directories"
-msgstr "Directorios compartidos"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Contenido del fichero '/etc/samba/smb.conf.template' desde el que se "
-"generará la configuración de samba. Los valores entre tuberías ('|') no "
-"deben cambiarse. Su valor se toma desde la pestaña 'Configuración General'."
-
-msgid "Workgroup"
-msgstr "Grupo de trabajo"
-
-#~ msgid "Shared Directory"
-#~ msgstr "Directorio compatido"
-
-#~ msgid "Physical Path"
-#~ msgstr "Ruta Física"
-
-#~ msgid "optional"
-#~ msgstr "opcional"
diff --git a/po/es/splash.po b/po/es/splash.po
deleted file mode 100644
index 8dfc24c..0000000
--- a/po/es/splash.po
+++ /dev/null
@@ -1,350 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-24 18:30+0200\n"
-"PO-Revision-Date: 2012-08-25 09:20+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Accept"
-msgstr "Aceptar"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-"El acceso a internet puede ser posible, sin embargo, porque otros miembros "
-"del proyecto comparten sus conexiones a internet privadas y estas pocas "
-"conexiones se comparten entre todos los usuarios. Por este motivo el ancho "
-"de banda está limitado y le pedimos que no haga:"
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "Clientes activos"
-
-msgid "Allowed hosts/subnets"
-msgstr "Máquinas y subredes permitidas"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"La limitación de ancho de banda sólo se activa cuando se establecen tanto el "
-"límite de subida como el de bajada. Ponga 0 para desactivarla. A los "
-"clientes en lista blanca no se les limita."
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-"Conviértase en un miembro activo de esta comunidad y ayude gestionando su "
-"propio nodo"
-
-msgid "Blacklist"
-msgstr "Lista negra"
-
-msgid "Blocked"
-msgstr "Bloqueado"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr "Tiempo de autorización"
-
-msgid "Client-Splash"
-msgstr "Cliente-Splash"
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr "Cliente-Splash es un sistema de autentificación para redes mesh."
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr "La velocidad de descarga de los clientes está limitada a (Kbytes/s)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-"Horas a las que se permitirá usar la red a los clientes que acepten la "
-"presentación."
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr "La velocidad de subida de los clientes está limitada a (Kbytes/s)"
-
-msgid "Contact"
-msgstr "Contacto"
-
-msgid "Decline"
-msgstr "Rechazar"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr "Haga una aportación para ayudarnos a mantener este proyecto vivo."
-
-msgid "Download limit"
-msgstr "Límite de descarga"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr "Zona del cortafuegos"
-
-msgid "General"
-msgstr "General"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nombre de máquina"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-"A estas máquinas y redes no se les mostrará la presentación y siempre serán "
-"bienvenidas."
-
-msgid "IP Address"
-msgstr "Dirección IP"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr "Si maneja su propio wi-fi use canales diferentes de los nuestros."
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr "Si es usuario habitual de esta red le pedimos apoyo:"
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr "Interceptar el tráfico cliente en esta interfaz"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interfaces that are used for Splash."
-msgstr "Interfaces usados para Splash."
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-"KB/s (Descarga/Subida). Puede evitar este límite contribuyendo activamente a "
-"este proyecto."
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "Dirección MAC"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "Direcciones MAC bloqueadas."
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-"Direcciones MAC de clientes en lista blanca. Estos no tendrán que aceptar la "
-"presentación ni tendrán limitado el ancho de banda."
-
-msgid "Netmask"
-msgstr "Máscara de red"
-
-msgid "Network"
-msgstr "Red"
-
-msgid "No clients connected"
-msgstr "Sin clientes conectados"
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-"Tenga presente que no somos un proveedor de acceso a internet sino una red "
-"comunitaria experimental."
-
-msgid "Policy"
-msgstr "Politica"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Guardar"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr "Zona del cortafuegos en la que está integradas las reglas del Splash"
-
-msgid "Splashtext"
-msgstr "Mensaje de presentación"
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "Tiempo restante"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-"Para preguntar porqué se le ha bloqueado o pedir acceso de nuevo intente "
-"contactar con el propietario de este punto de acceso:"
-
-msgid "Traffic in/out"
-msgstr "Tráfico entrante/saliente"
-
-msgid "Upload limit"
-msgstr "Límite de subida"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr "Bienvenido"
-
-msgid "Whitelist"
-msgstr "Lista blanca"
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr "Se ha conectado a la red libre mesh inalámbrica"
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-"Introduzca aquí el texto que se mostrará a los clientes.<br />Es posible "
-"usar las siguientes etiquetas: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### y ###ACCEPT###."
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-"Se le ha bloqueado el acceso a esta red, probablemente porque hizo algo "
-"prohibido explícitamente en sus reglas."
-
-msgid "Your bandwidth is limited to"
-msgstr "Su ancho de banda está limitado a"
-
-msgid "blacklisted"
-msgstr "en lista negra"
-
-msgid "expired"
-msgstr "caducado"
-
-msgid "optional when using host addresses"
-msgstr "opcional si usa direcciones de máquina"
-
-msgid "perform any kind of illegal activities"
-msgstr "llevar a cabo cualquier tipo de actividades ilegales"
-
-msgid "splashed"
-msgstr "Recibido"
-
-msgid "temporarily blocked"
-msgstr "bloqueado temporalmente"
-
-msgid "unknown"
-msgstr "desconocido"
-
-msgid "use filesharing applications on this network"
-msgstr "usar aplicaciones de compartición de ficheros en esta red"
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr "malgastar ancho de banda con descargas innecesarias o multimedia"
-
-msgid "whitelisted"
-msgstr "en lista blanca"
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "Si acepta estas reglas pordrá usar esta red para"
-
-#~ msgid "Edit Splash text"
-#~ msgstr "Editar la página de bienvenida"
-
-#~ msgid "hour(s). After this time you need to accept these rules again."
-#~ msgstr "hora/horas. Tras este tiempo deberá aceptar las reglas de nuevo."
-
-#~ msgid "the owner of this access point."
-#~ msgstr "el propietario de este punto de acceso."
diff --git a/po/es/statistics.po b/po/es/statistics.po
deleted file mode 100644
index 3571a53..0000000
--- a/po/es/statistics.po
+++ /dev/null
@@ -1,721 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-12-12 20:19+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Action (target)"
-msgstr "Acción (objetivo)"
-
-msgid "Add command for reading values"
-msgstr "Añadir comando para leer valores"
-
-msgid "Add matching rule"
-msgstr "Añadir regla"
-
-msgid "Add multiple hosts separated by space."
-msgstr "Añadir múltiples máquinas separadas por espacio."
-
-msgid "Add notification command"
-msgstr "Añadir comando de notificación"
-
-msgid "Base Directory"
-msgstr "Directorio Base"
-
-msgid "Basic monitoring"
-msgstr "Monitorización básica"
-
-msgid "CPU Plugin Configuration"
-msgstr "Configuración del plugin de CPU"
-
-msgid "CSV Output"
-msgstr "Salida CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Configuración del plugin de CSV"
-
-msgid "Cache collected data for"
-msgstr "Almacenar datos recogidos para"
-
-msgid "Cache flush interval"
-msgstr "Intervalo de limpieza del caché"
-
-msgid "Chain"
-msgstr "Cadena"
-
-msgid "CollectLinks"
-msgstr "Enlaces"
-
-msgid "CollectRoutes"
-msgstr "Rutas"
-
-msgid "CollectTopology"
-msgstr "Topología"
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Configuración de Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd is un demonio para la recolección de datos desde varias fuentes a "
-"través de la utilización de diferentes plugins. Aquí puede cambiar la "
-"configuración general del demonio que maneja collectd."
-
-msgid "Conntrack"
-msgstr "Seguimiento"
-
-msgid "Conntrack Plugin Configuration"
-msgstr "Configuración del seguimiento"
-
-msgid "DF Plugin Configuration"
-msgstr "Configuración del plugin DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Configuración del plugin DNS"
-
-msgid "Data collection interval"
-msgstr "Intervalo de recolección de datos"
-
-msgid "Datasets definition file"
-msgstr "Archivo de definición de conjunto de datos"
-
-msgid "Destination ip range"
-msgstr "Rango IP de destino"
-
-msgid "Directory for collectd plugins"
-msgstr "Directorio para los plugins de collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Directorio para las sub-configuraciones"
-
-msgid "Disk Plugin Configuration"
-msgstr "Configuración del plugin Disco"
-
-msgid "Disk Space Usage"
-msgstr "Espacio en disco ocupado"
-
-msgid "Disk Usage"
-msgstr "Disco ocupado"
-
-msgid "Display Host »"
-msgstr "Mostrar máquina »"
-
-msgid "Display timespan »"
-msgstr "Mostrar lapso de tiempo »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Configuración del plugin email"
-
-msgid "Email"
-msgstr "Correo electrónico"
-
-msgid "Enable this plugin"
-msgstr "Activar este plugin"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Configuración del plugin Exec"
-
-msgid "Filter class monitoring"
-msgstr "Monitorización del filtro de clases"
-
-msgid "Firewall"
-msgstr "Cortafuegos"
-
-msgid "Flush cache after"
-msgstr "Vaciar caché tras"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "Retransmitir entre las direcciones de escucha y servidor"
-
-msgid "Graphs"
-msgstr "Gráficas"
-
-msgid "Group"
-msgstr "Grupo"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Aquí puede definir los comandos externos que iniciará collectd para leer "
-"ciertos valores. Los valores se leen desde la salida estándar (stdout)."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Aquí puede definir los comandos externos que iniciará collectd cuando se "
-"alcancen ciertos valores umbral."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Aquí puede definir varios criterios de selección de reglas de iptables "
-"monitorizadas."
-
-msgid "Host"
-msgstr "Máquina"
-
-msgid "Hostname"
-msgstr "Nombre de máquina"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr "IP o nombre de máquina desde la que obtener la salida de txtinfo"
-
-msgid "IRQ Plugin Configuration"
-msgstr "Configuración del plugin IRQ"
-
-msgid "Ignore source addresses"
-msgstr "Ignorar direcciones de origen"
-
-msgid "Incoming interface"
-msgstr "Interfaz de entrada"
-
-msgid "Interface Plugin Configuration"
-msgstr "Configuración del interfaz de plugins"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interrupts"
-msgstr "Interrupciones"
-
-msgid "Interval for pings"
-msgstr "Intervalo entre pings"
-
-msgid "Iptables Plugin Configuration"
-msgstr "Configuración del plugin Iptables"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr "No marcar para determinar automáticamente que interfaces monitorizar."
-
-msgid "Listen host"
-msgstr "Máquina de escucha"
-
-msgid "Listen port"
-msgstr "Puerto de escucha"
-
-msgid "Listener interfaces"
-msgstr "Interfaces para escuchar"
-
-msgid "Load Plugin Configuration"
-msgstr "Configuración del plugin de carga"
-
-msgid "Maximum allowed connections"
-msgstr "Máximo número de conexiones"
-
-msgid "Memory"
-msgstr "Memoria"
-
-msgid "Memory Plugin Configuration"
-msgstr "Configuración del plugin Memoria"
-
-msgid "Monitor all except specified"
-msgstr "Monitorizar todos menos los especificados"
-
-msgid "Monitor all local listen ports"
-msgstr "Monitorizar todos los puertos de escucha locales"
-
-msgid "Monitor devices"
-msgstr "Dispositivos a monitonizar"
-
-msgid "Monitor disks and partitions"
-msgstr "Monitorizar discos y particiones"
-
-msgid "Monitor filesystem types"
-msgstr "Monitorizar tipos de sistema de archivos"
-
-msgid "Monitor hosts"
-msgstr "Monitorizar máquinas"
-
-msgid "Monitor interfaces"
-msgstr "Monitorizar interfaces"
-
-msgid "Monitor interrupts"
-msgstr "Monitorizar interrupciones"
-
-msgid "Monitor local ports"
-msgstr "Monitorizar puertos locales"
-
-msgid "Monitor mount points"
-msgstr "Monitorizar puntos de montaje"
-
-msgid "Monitor processes"
-msgstr "Monitorizar procesos"
-
-msgid "Monitor remote ports"
-msgstr "Monitorizar puertos remotos"
-
-msgid "Name of the rule"
-msgstr "Nombre de la regla"
-
-msgid "Netlink"
-msgstr "Enlace de red"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Configuración del plugin \"enlace de red\""
-
-msgid "Network"
-msgstr "Red"
-
-msgid "Network Plugin Configuration"
-msgstr "Configuración del plugin \"Red\""
-
-msgid "Network plugins"
-msgstr "Plugins de red"
-
-msgid "Network protocol"
-msgstr "Protocolo de red"
-
-msgid "Number of threads for data collection"
-msgstr "Número de hilos para recolección de datos"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr "Configuración del plugin \"OLSRd\""
-
-msgid "Only create average RRAs"
-msgstr "Crear sólo RRAs medias"
-
-msgid "Options"
-msgstr "Opciones"
-
-msgid "Outgoing interface"
-msgstr "Interfaz de salida"
-
-msgid "Output plugins"
-msgstr "Plugins de salida"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Configuración del plugin \"Ping\""
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Processes"
-msgstr "Procesos"
-
-msgid "Processes Plugin Configuration"
-msgstr "Configuración del plugin \"Procesos\""
-
-msgid "Processes to monitor separated by space"
-msgstr "Procesos a monitorizar (separados por espacios)"
-
-msgid "Processor"
-msgstr "Procesador"
-
-msgid "Qdisc monitoring"
-msgstr "Monitorización Qdisc"
-
-msgid "RRD XFiles Factor"
-msgstr "Factor XFiles RRD"
-
-msgid "RRD heart beat interval"
-msgstr "Intervalo de pulso RRD"
-
-msgid "RRD step interval"
-msgstr "Intervalo de paso RRD"
-
-msgid "RRDTool"
-msgstr "Herramienta RRD"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Configuración del plugin \"Herramienta RRD\""
-
-msgid "Rows per RRA"
-msgstr "Filas por RRA"
-
-msgid "Script"
-msgstr "Guión"
-
-msgid "Seconds"
-msgstr "Segundos"
-
-msgid "Server host"
-msgstr "Máquina servidor"
-
-msgid "Server port"
-msgstr "Puerto servidor"
-
-msgid "Shaping class monitoring"
-msgstr "Monitorización de la clase shaping"
-
-msgid "Socket file"
-msgstr "Fichero de sockets"
-
-msgid "Socket group"
-msgstr "Grupo socket"
-
-msgid "Socket permissions"
-msgstr "Permisos para socket"
-
-msgid "Source ip range"
-msgstr "Rango de direcciones IP origen"
-
-msgid "Specifies what information to collect about links."
-msgstr "Especifica qué información recolectar sobre enlaces."
-
-msgid "Specifies what information to collect about routes."
-msgstr "Especifica qué información recolectar sobre rutas."
-
-msgid "Specifies what information to collect about the global topology."
-msgstr "Especifica qué información recolectar sobre la topología global."
-
-msgid "Statistics"
-msgstr "Estadísticas"
-
-msgid "Storage directory"
-msgstr "Directorio de guardado"
-
-msgid "Storage directory for the csv files"
-msgstr "Directorio para guardar archivos csv"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Guardar datos como ratios en vez de valores absolutos"
-
-msgid "Stored timespans"
-msgstr "Intervalos almacenados"
-
-msgid "System Load"
-msgstr "Carga del sistema"
-
-msgid "System plugins"
-msgstr "Plugins del sistema"
-
-msgid "TCP Connections"
-msgstr "Conexiones TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Configuración del plugin \"Conexiones TCP\""
-
-msgid "TTL for network packets"
-msgstr "TTL para paquetes de red"
-
-msgid "TTL for ping packets"
-msgstr "TTL para paquetes de ping"
-
-msgid "Table"
-msgstr "Tabla"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-"El plugin NUT obtiene información sobre Sistemas de Alimentación "
-"Ininterrumpida."
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-"El plugin OLSRd lee información sobre redes distribuidas desde el plugin "
-"txtinfo de OLSRd."
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-"El plugin \"Seguimiento\" recoge estadísticas sobre el número de conexiones "
-"analizadas."
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-"El plugin \"CPU\" recolecta estadísticas básicas acerca del uso del "
-"procesador."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"El plugin \"CSV\" almacena los datos recolectados en un archivo con formato "
-"csv para su procesado posterior con programas de terceros."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"El plugin \"DF\" recolecta estadísticas acerca del uso del espacio en disco "
-"en diferentes dispositivos, puntos de montaje y tipos de sistema de archivos."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"El plugin \"Disco\" recolecta estadísticas detallada acerca de su "
-"utilización para las particiones seleccionadas o bien el disco completo."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"El plugin \"DNS\" recolecta estadísticas detalladas acerca del trafico DNS "
-"en las interfaces seleccionadas."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"El plugin \"eMail\" crea un socket de unix (unix-socket) que puede "
-"utilizarse para transmitir estadísticas de email a un demonio collectd en "
-"ejecución. Este plugin fue desarrollado, en primer instancia, para ser "
-"utilizado en conjunto con Mail::SpamAssasin::Plugin::Collectd pero puede "
-"utilizarse de diferentes formas."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"El plugin \"Exec\" inicia comandos externos para leer valores o notificar a "
-"procesos externos cuando determinados valores se alcanzan."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"El plugin \"Interface\" recoge estadísticas de tráfico en las interfaces "
-"seleccionadas."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"El plugin \"Iptables\" monitoriza las reglas seleccionadas del cortafuegos y "
-"recoge información de bytes y paquetes procesados por cada regla."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"El plugin IRQ monitorizará las activaciones por segundo de cada interrupción "
-"elegida. Si no se selecciona ninguna se monitorizarán todas."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-"El plugin \"iwinfo\" recolecta estadísticas sobre la potencia de la señal "
-"inalámbrica, ruido y calidad."
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-"El plugin \"carga\" recoge estadísticas sobre la carga general del sistema."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr "El plugin \"memoria\" recoge estadísticas sobre el uso de memoria."
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"El plugin \"netlink\" recoge informaciones extendidas como estadísticas "
-"qdisc-, clase- y filtro- para las interfaces seleccionadas."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"El plugin \"red\" proporciona comunicación entre diferentes instancias de "
-"collectd. Collectd puede operar tanto en modo cliente como en modo servidor. "
-"En modo cliente la información recogida se envía a una instancia que se "
-"encuentre en modo servidor. En modo servidor la instancia recibe datos de "
-"otras máquinas."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"El plugin \"ping\" enviará ecos ICMP a las máquinas elegifas para medir el "
-"tiempo de viaje para cada host."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"El plugin \"procesos\" recoge información como tiempo de CPU, fallos de "
-"página y uso de memoria de los procesos elegidos."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"El plugin \"rrdtool\" almacena datos en ficheros de bb.dd. RRD que son la "
-"base para los diagramas.<br /><br /><strong>¡Ojo: Configurar valores "
-"incorrectos puede hacer que se use mucho espacio en el directorio temporal y "
-"puede hacer que el dispositivo funcione mal!</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"El paquete \"estadísticas\" está basado en <a href=\"http://collectd.org/"
-"index.shtml\">Collectd</a> y utiliza <a href=\"http://oss.oetiker.ch/rrdtool/"
-"\">RRD Tool</a> para dibujar gráficos con los datos recogidos."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"El plugin \"tcpconns\" recoge información de conexiones TCP abiertas en los "
-"puertos seleccionados."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"El plugin \"unixsock\" crea un socket UNIX que se puede usar para leer los "
-"datos recogidos por una instancia collectd."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Esta sección define sobre qué interfaces collectd esperará conexiones "
-"entrantes."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Esta sección define a qué servidores se envían los datos recolectados "
-"localmente."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Intenta resolver el nombre de máquina cualificado"
-
-msgid "UPS"
-msgstr "SAI"
-
-msgid "UPS Plugin Configuration"
-msgstr "Configuración del plugin SAI"
-
-msgid "UPS name in NUT ups@host format"
-msgstr "Nombre del SAI en el formato de NUT sai@máquina"
-
-msgid "UnixSock"
-msgstr "Socket UNIX"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Configuración del plugin \"UnixSock\""
-
-msgid "Used PID file"
-msgstr "Archivo PID utilizado"
-
-msgid "User"
-msgstr "Usuario"
-
-msgid "Verbose monitoring"
-msgstr "Monitorización detallada"
-
-msgid "Wireless"
-msgstr "Red inalámbrica"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr "Configuración plugin \"Wireless iwinfo\""
-
-msgid "e.g. br-ff"
-msgstr "p.e. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "p.e. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "p.e. reject-with tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "16 caracteres máximo"
-
-msgid "reduces rrd size"
-msgstr "reduce el tamaño RRD"
-
-msgid "seconds; multiple separated by space"
-msgstr "segundos (varios separados por espacio)"
-
-msgid "server interfaces"
-msgstr "interfaces servidores"
-
-#~ msgid "Installed network plugins:"
-#~ msgstr "Plugins de red instalados:"
-
-#~ msgid "Installed output plugins:"
-#~ msgstr "Plugins de salida instalados:"
-
-#~ msgid ""
-#~ "Network plugins are used to collect information about open tcp "
-#~ "connections, interface traffic, iptables rules etc."
-#~ msgstr ""
-#~ "Los plugins de red se usan para recolectar información sobre conexiones TCP, "
-#~ "tráfico en los interfaces, reglas de iptables, etc."
-
-#~ msgid ""
-#~ "Output plugins provide different possibilities to store collected data. "
-#~ "It is possible to enable multiple plugin at one, for example to store "
-#~ "collected data in rrd databases and to transmit the data over the network "
-#~ "to other collectd instances."
-#~ msgstr ""
-#~ "Los plugins de salida ofrecen varias posibilidades para almacenar los datos. "
-#~ "Es posible activar varios plugins a la vez, por ejemplo para almacenar "
-#~ "datos recolectados en bases de datos RRD y para transmitir los datos sobre "
-#~ "la red a otras instancias de collectd."
-
-#~ msgid ""
-#~ "System plugins collecting values about system state and ressource usage "
-#~ "on the device.:"
-#~ msgstr ""
-#~ "Los plugins del sistema recolectan valores sobre el estado y el uso de "
-#~ "recursos del dispositivo.:"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "El plugin \"inalámbrico\" recoge estadísticas sobre fuerza de la señal, ruido "
-#~ "y calidad."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Configuración del plugin \"Wireless\""
-
-#~ msgid "Filepath of the unix socket"
-#~ msgstr "Ruta de archivo para el socket de unix"
-
-#~ msgid "Group ownership of the unix socket"
-#~ msgstr "Grupo (dueño) del socket de unix "
-
-#~ msgid "group name"
-#~ msgstr "nombre del grupo"
-
-#~ msgid "File permissions of the unix socket"
-#~ msgstr "Permisos de archivos del socket de unix"
-
-#~ msgid "octal"
-#~ msgstr "octal"
diff --git a/po/es/tinyproxy.po b/po/es/tinyproxy.po
deleted file mode 100644
index c9faff1..0000000
--- a/po/es/tinyproxy.po
+++ /dev/null
@@ -1,354 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-10-07 15:08+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-"<em>Vía proxy</em> enruta las peticiones al destino vía el proxy superior "
-"especificado, <em>Rechazar acceso</em> desactiva cualquier proxy superior al "
-"destino"
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"Añade una cabecera HTTP con \"X-Tinyproxy\" con la dirección IP del cliente "
-"a las peticiones retransmitidas"
-
-msgid "Allowed clients"
-msgstr "Clientes permitidos"
-
-msgid "Allowed connect ports"
-msgstr "Puertos permitidos"
-
-msgid "Bind address"
-msgstr "Dirección de asociación"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"Expresiones regulares extendidas. Por defecto se filtra con expresiones "
-"regulares POSIX básicas"
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr "Distinguir mayúsculas y minúsculas"
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr "Comparar con URLs. Por defecto el filtro se basa en nombres de dominio"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"Tratar el fichero de filtro como una lista de máquinas a permitir. Por "
-"defecto actúa como una lista negra"
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-"Puede ser un rango de IPs, un nombre de dominio o \".\" para cualquier "
-"máquina sin dominio"
-
-msgid "Configuration"
-msgstr "Configuración"
-
-msgid "Connection timeout"
-msgstr "Espera de conexión"
-
-msgid "Default deny"
-msgstr "Denegar por defecto"
-
-msgid "Enable Tinyproxy server"
-msgstr "Activar el servidor Tinyproxy"
-
-msgid "Error page"
-msgstr "Página de error"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr "No se han podido obtener estadísticas de:"
-
-msgid "Filter by RegExp"
-msgstr "Filtrar por RegExp"
-
-msgid "Filter by URLs"
-msgstr "Filtrar por URLs"
-
-msgid "Filter case-sensitive"
-msgstr "Distinguir entre mayúsculas y minúsculas"
-
-msgid "Filter file"
-msgstr "Fichero de filtro"
-
-msgid "Filtering and ACLs"
-msgstr "Filtrado y ACLs"
-
-msgid "General settings"
-msgstr "Configuración general"
-
-msgid "Group"
-msgstr "Grupo"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-"FIchero con la plantilla HTML a usar para las peticiones de estadísticas"
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "Fichero con la plantilla HTTP a usar cuando ocurra algún error"
-
-msgid "Header whitelist"
-msgstr "Cabeceras autorizadas"
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr "Direcciones IP o rangos a los que se permite usar el servidor proxy"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-"Lista de puertos permitidos al método CONNECT. Use 0 para todos los puertos"
-
-msgid "Listen address"
-msgstr "Dirección de escucha"
-
-msgid "Listen port"
-msgstr "Puerto de escucha"
-
-msgid "Log file"
-msgstr "Registro"
-
-msgid "Log file to use for dumping messages"
-msgstr "Fichero de volcado de mensajes"
-
-msgid "Log level"
-msgstr "Nivel de registro"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr "Nivel de registro del proceso Tinyproxy"
-
-msgid "Max. clients"
-msgstr "Clientes máximos"
-
-msgid "Max. requests per server"
-msgstr "Peticiones máximas por servidor"
-
-msgid "Max. spare servers"
-msgstr "Procesos servidores máximos"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr "Máximo de clientes conectados simultáneamente"
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-"Peticiones máximas por proceso. Si se supera el proceso es arrancado de "
-"nuevo. Para ilimitados indique 0."
-
-msgid "Maximum number of prepared idle processes"
-msgstr "Máximo de procesos inactivos"
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr "Segundos máximos que se tiene una conexión inactiva abierta"
-
-msgid "Min. spare servers"
-msgstr "Procesos servidores mínimos"
-
-msgid "Minimum number of prepared idle processes"
-msgstr "Mínimo de procesos inactivos"
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr "Procesos inactivos a arrancar cuando se lanza Tinyproxy"
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr "Fichero plano con URLs o dominios a filtrar. Uno por línea"
-
-msgid "Policy"
-msgstr "Política"
-
-msgid "Privacy settings"
-msgstr "Configuración de privacidad"
-
-msgid "Reject access"
-msgstr "Rechazar acceso"
-
-msgid "Server Settings"
-msgstr "Configuración del servidor"
-
-msgid "Server limits"
-msgstr "Límites del servidor"
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-"Nombres de cabeceras HTTP que se dejan pasar. el resto se descartan. Deje en "
-"blanco para desactivar el filtrado de cabeceras"
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr "Puerto de escucha de peticiones"
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr "Nombre de máquina a usar en la cabecera HTTP \"Via\""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-"Dirección a la que se asocia Tinyproxy para peticiones de traspaso salientes"
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr "Direcciones de escucha de peticiones"
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr "Nombre de grupo en el que se ejecuta el proceso Tinyproxy"
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-"Proxy superior a usar para llegar a la máquina destino. El formato es "
-"<code>dirección_puerto</code>"
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr "Nombre de usuario con en el que se ejecuta el proceso Tinyproxy"
-
-msgid "Start spare servers"
-msgstr "Arrancar servidores libres"
-
-msgid "Statistics page"
-msgstr "Estadísticas"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Target host"
-msgstr "Máquina destino"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr "Estado de Tinyproxy"
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy es un proxy sin cache HTTP/HTTPS pequeño y rápido"
-
-msgid "Upstream Proxies"
-msgstr "Proxies superiores"
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-"Las reglas de proxy superior definen qué servidores usar cuando se accede a "
-"ciertas direcciones IP o dominios."
-
-msgid "Use syslog"
-msgstr "Usar SysLog"
-
-msgid "User"
-msgstr "Usuario"
-
-msgid "Via hostname"
-msgstr "Nombre de máquina en \"Via\""
-
-msgid "Via proxy"
-msgstr "Via proxy"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr "Escribe los mensajes de registro en SysLog en vez de en un fichero"
-
-msgid "X-Tinyproxy header"
-msgstr "Cabecera X-Tinyproxy"
-
-#~ msgid "Allow access from"
-#~ msgstr "Permitir acceso desde"
-
-#~ msgid "Allowed headers for anonymous proxy"
-#~ msgstr "Encabezados permitidos de proxies anónimos"
-
-#~ msgid "Bind outgoing traffic to address"
-#~ msgstr "Ligar tráfico de salida a la dirección"
-
-#~ msgid "Ports allowed for CONNECT method"
-#~ msgstr "Puertos permitidos para el método CONNECT"
-
-#~ msgid "0 = disabled, empty = all"
-#~ msgstr "0 = Deshabilitado, vacío = todos"
-
-#~ msgid "Error document"
-#~ msgstr "Error en documento"
-
-#~ msgid "Filter list"
-#~ msgstr "Lista de filtros"
-
-#~ msgid "Case sensitive filters"
-#~ msgstr "Filtros de mayúsculas y minúsculas "
-
-#~ msgid "Filter list is a whitelist"
-#~ msgstr "La Lista de Filtros es una lista blanca"
-
-#~ msgid "Extended regular expression filters"
-#~ msgstr "Filtros extendido para expresiones regulares"
-
-#~ msgid "Filter URLs instead of domains"
-#~ msgstr "Filtrar URLs en vez de dominios"
-
-#~ msgid "Listen on address"
-#~ msgstr "Escuchar en dirección"
-
-#~ msgid "Logfile"
-#~ msgstr "Logfile"
-
-#~ msgid "Maximum number of clients"
-#~ msgstr "Número máximo de clientes"
-
-#~ msgid "Maximum requests per thread"
-#~ msgstr "Máximas peticiones por hilo"
-
-#~ msgid "Spare servers to start with"
-#~ msgstr "Spare servers to start with"
-
-#~ msgid "Statistic document"
-#~ msgstr "Documento de estadística"
-
-#~ msgid "Write to syslog"
-#~ msgstr "Escribir al syslog"
-
-#~ msgid "Connection Timeout"
-#~ msgstr "Tiempo agotado para la conexión"
-
-#~ msgid "Value of Via-Header"
-#~ msgstr "Valor para Via-Header"
-
-#~ msgid "Include client IP"
-#~ msgstr "Incluir IP del cliente"
-
-#~ msgid "Upstream Control"
-#~ msgstr "Control de subida (upstream)"
-
-#~ msgid "Type"
-#~ msgstr "Tipo"
-
-#~ msgid "Upstream Proxy"
-#~ msgstr "Proxy de subida (upstream)"
diff --git a/po/es/transmission.po b/po/es/transmission.po
deleted file mode 100644
index 9eeb2fb..0000000
--- a/po/es/transmission.po
+++ /dev/null
@@ -1,299 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-21 22:06+0200\n"
-"PO-Revision-Date: 2012-08-26 10:47+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Alternative download speed"
-msgstr "Velocidad de descarga alternativa"
-
-msgid "Alternative speed enabled"
-msgstr "Velocidad alternativa activada"
-
-msgid "Alternative speed time begin"
-msgstr "Hora de inicio de la velocidad alternativa"
-
-msgid "Alternative speed time day"
-msgstr "Día de la velocidad alternativa"
-
-msgid "Alternative speed time end"
-msgstr "Hora de fin de la velocidad alternativa"
-
-msgid "Alternative speed timing enabled"
-msgstr "Temporización alternativa de la velocidad activada"
-
-msgid "Alternative upload speed"
-msgstr "Velocidad de subida alternativa"
-
-msgid "Automatically start added torrents"
-msgstr "Arrancar automáticamente los torrents al añadirlos"
-
-msgid "Bandwidth settings"
-msgstr "Configuración del ancho de banda"
-
-msgid "Binding address IPv4"
-msgstr "Dirección IPv4 a asociar"
-
-msgid "Binding address IPv6"
-msgstr "Dirección IPv6 a asociar"
-
-msgid "Block list enabled"
-msgstr "Lista de bloques activada"
-
-msgid "Blocklist URL"
-msgstr "URL de la lista de bloques"
-
-msgid "Blocklists"
-msgstr "Listas de bloques"
-
-msgid "Cache size in MB"
-msgstr "Tamaño de la caché en MB"
-
-msgid "Config file directory"
-msgstr "Directorio del fichero de configuración"
-
-msgid "DHT enabled"
-msgstr "DHT activado"
-
-msgid "Debug"
-msgstr "Depurar"
-
-msgid "Download directory"
-msgstr "Directorio de descargas"
-
-msgid "Download queue enabled"
-msgstr "Cola de descargas activada"
-
-msgid "Download queue size"
-msgstr "Tamaño de la cola de descargas"
-
-msgid "Enable watch directory"
-msgstr "Activar directorio a observar"
-
-msgid "Enabled"
-msgstr "Activado"
-
-msgid "Encryption"
-msgstr "Encriptado"
-
-msgid "Error"
-msgstr "Error"
-
-msgid "Fast"
-msgstr "Rápido"
-
-msgid "Files and Locations"
-msgstr "Ficheros y posiciones"
-
-msgid "Forced"
-msgstr "Forzado"
-
-msgid "Full"
-msgstr "Lleno"
-
-msgid "Global peer limit"
-msgstr "Límite global de máquinas"
-
-msgid "Global settings"
-msgstr "Configuración global"
-
-msgid "Idle seeding limit"
-msgstr "Límite de sembrado en vacío"
-
-msgid "Idle seeding limit enabled"
-msgstr "Límite de sembrado en vacío activado"
-
-msgid "Incomplete directory"
-msgstr "Directorio incompleto"
-
-msgid "Incomplete directory enabled"
-msgstr "Directorio incompleto activado"
-
-msgid "Info"
-msgstr "Información"
-
-msgid "LPD enabled"
-msgstr "LPD activado"
-
-msgid "Lazy bitfield enabled"
-msgstr "Lazy bitfield activado"
-
-msgid "Message level"
-msgstr "Nivel de mensajes"
-
-msgid "Miscellaneous"
-msgstr "Varios"
-
-msgid "None"
-msgstr "Ninguno"
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-"Número/en bits. Empiece con 0 y por cada día que quiera que se active el "
-"programados sume: Para domingo - 1, lunes - 2, martes - 4, miércoles - 8, "
-"jueves - 16, viernes - 32, sábado - 64"
-
-msgid "Off"
-msgstr "Apagado"
-
-msgid "Open Web Interface"
-msgstr "Interfaz de red abierta"
-
-msgid "PEX enabled"
-msgstr "PEX activado"
-
-msgid "Peer Port settings"
-msgstr "Configuración de puertos"
-
-msgid "Peer congestion algorithm"
-msgstr "Algoritmo de congestión"
-
-msgid "Peer limit per torrent"
-msgstr "Límite por torrent"
-
-msgid "Peer port"
-msgstr "Puerto"
-
-msgid "Peer port random high"
-msgstr "Puerto más alto"
-
-msgid "Peer port random low"
-msgstr "Puerto más bajo"
-
-msgid "Peer port random on start"
-msgstr "Puerto aleatorio al arrancar"
-
-msgid "Peer settings"
-msgstr "Configuración de peer"
-
-msgid "Peer socket tos"
-msgstr "Peer socket tos"
-
-msgid "Port forwarding enabled"
-msgstr "Traspaso de puertos activado"
-
-msgid "Preferred"
-msgstr "Preferente"
-
-msgid "Prefetch enabled"
-msgstr "Activar prefetch"
-
-msgid "Queue stalled enabled"
-msgstr "Activar bloqueo de cola"
-
-msgid "Queue stalled minutes"
-msgstr "Minutos de bloqueo de cola"
-
-msgid "Queueing"
-msgstr "Colas"
-
-msgid "RPC URL"
-msgstr "URL RPC"
-
-msgid "RPC authentication required"
-msgstr "Autentificación RPC obligatoria"
-
-msgid "RPC bind address"
-msgstr "Dirección de asociación RPC"
-
-msgid "RPC enabled"
-msgstr "RPC activado"
-
-msgid "RPC password"
-msgstr "Contraseña RPC"
-
-msgid "RPC port"
-msgstr "Puerto RPC"
-
-msgid "RPC settings"
-msgstr "Configuración RPC"
-
-msgid "RPC username"
-msgstr "Nombre de usuario RPC"
-
-msgid "RPC whitelist"
-msgstr "Lista blanca RPC"
-
-msgid "RPC whitelist enabled"
-msgstr "Activar listas blancas RPC"
-
-msgid "Ratio limit"
-msgstr "Límite de ratio"
-
-msgid "Ratio limit enabled"
-msgstr "Límite de ratio activado"
-
-msgid "Rename partial files"
-msgstr "Renombrar ficheros parciales"
-
-msgid "Run daemon as user"
-msgstr "Ejecutar demonio como usuario"
-
-msgid "Scheduling"
-msgstr "Programación"
-
-msgid "Scrape paused torrents enabled"
-msgstr "Activar scrape de torrents en pausa"
-
-msgid "Script torrent done enabled"
-msgstr "Activar script de fin de torrent"
-
-msgid "Script torrent done filename"
-msgstr "Nombre de fichero del script"
-
-msgid "Seed queue enabled"
-msgstr "Cola de seed activada"
-
-msgid "Seed queue size"
-msgstr "Tamaño máximo de la cola de seed"
-
-msgid "Speed limit down"
-msgstr "Velocidad mínima"
-
-msgid "Speed limit down enabled"
-msgstr "Velocidad mínima activada"
-
-msgid "Speed limit up"
-msgstr "Velocidad máxima"
-
-msgid "Speed limit up enabled"
-msgstr "Velocidad máxima activada"
-
-msgid "Transmission"
-msgstr "Transmission"
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-"Configuración. El demonio Transmission es un cliente de bittorrent simple."
-
-msgid "Trash original torrent files"
-msgstr "Eliminar los ficheros torrent originales"
-
-msgid "Upload slots per torrent"
-msgstr "Ranuras de subida por torrent"
-
-msgid "Watch directory"
-msgstr "Directorio a vigilar"
-
-msgid "in minutes from midnight"
-msgstr "en minutos para la media noche"
-
-msgid "preallocation"
-msgstr "precolocación"
-
-msgid "uTP enabled"
-msgstr "uTP activado"
diff --git a/po/es/upnp.po b/po/es/upnp.po
deleted file mode 100644
index 3ad9b01..0000000
--- a/po/es/upnp.po
+++ /dev/null
@@ -1,165 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-10-07 16:11+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"Los ACL especifican qué puertos externos pueden ser redirigidos hacia qué "
-"direcciones y puertos internas"
-
-msgid "Action"
-msgstr "Acción"
-
-msgid "Active UPnP Redirects"
-msgstr "Redirecciones UPnP activas"
-
-msgid "Advanced Settings"
-msgstr "Configuración avanzada"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "Permitir añadir redirecciones sólo a IPs que lo soliciten"
-
-msgid "Announced model number"
-msgstr "Número de modelo declarado"
-
-msgid "Announced serial number"
-msgstr "Número de serie declarado"
-
-msgid "Clean rules interval"
-msgstr "Intervalo de borrado de reglas"
-
-msgid "Clean rules threshold"
-msgstr "Umbral de borrado de reglas"
-
-msgid "Client Address"
-msgstr "Dirección del cliente"
-
-msgid "Client Port"
-msgstr "Puerto del cliente"
-
-msgid "Collecting data..."
-msgstr "Un momento..."
-
-msgid "Comment"
-msgstr "Comentario"
-
-msgid "Delete Redirect"
-msgstr "Borrar redirección"
-
-msgid "Device UUID"
-msgstr "UUID del dispositivo"
-
-msgid "Downlink"
-msgstr "Enlace para bajada"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Activar la funcionalidad NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Activar la funcionalidad UPnP"
-
-msgid "Enable additional logging"
-msgstr "Activar registro adicional"
-
-msgid "Enable secure mode"
-msgstr "Habilitar modo seguro"
-
-msgid "External Port"
-msgstr "Puerto externo"
-
-msgid "External ports"
-msgstr "Puertos externos"
-
-msgid "General Settings"
-msgstr "Configuración general"
-
-msgid "Internal addresses"
-msgstr "Direcciones internas"
-
-msgid "Internal ports"
-msgstr "Puertos internos"
-
-msgid "MiniUPnP ACLs"
-msgstr "ACLs MiniUPnP"
-
-msgid "MiniUPnP settings"
-msgstr "Configuración MiniUPnP"
-
-msgid "Notify interval"
-msgstr "Intervalo de notificación"
-
-msgid "Port"
-msgstr "Puerto"
-
-msgid "Presentation URL"
-msgstr "URL de presentación"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Escribir información de depuración extra en el registro del sistema"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Informar del tiempo activo del sistema en vez de el del demonio"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Arrancar servicio UPnP y NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Sin redirecciones activas."
-
-msgid "UPNP"
-msgstr "UPnP"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permite que los puestos de la red local configuren automáticamente el "
-"router."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permite que los puestos de la red local configuren automáticamente el "
-"router."
-
-msgid "UPnP lease file"
-msgstr "Tiempo de cesión UPnP"
-
-msgid "Universal Plug & Play"
-msgstr "Plug & Play universal"
-
-msgid "Uplink"
-msgstr "Enlace de subida"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Valor en KBytes/s (sólo informativo)"
-
-msgid "enable"
-msgstr "activar"
-
-#~ msgid "Log output"
-#~ msgstr "Loguear salida"
-
-#~ msgid ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
-#~ msgstr ""
-#~ "UPNP sólo deberia habilitarse si es abasolutamente necesario ya que puede "
-#~ "comprometer la seguridad de su red."
diff --git a/po/es/ushare.po b/po/es/ushare.po
deleted file mode 100644
index e8422b9..0000000
--- a/po/es/ushare.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-08-25 09:23+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "Directorios de contenido"
-
-msgid "Disable telnet console"
-msgstr "Inhabilitar consola telnet"
-
-msgid "Disable webinterface"
-msgstr "Inhabilitar interfaz web"
-
-msgid "Enable"
-msgstr "Activar"
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid "Options"
-msgstr "Opciones"
-
-msgid "Servername"
-msgstr "Nombre para el servidor"
-
-msgid "Settings"
-msgstr "Configuración"
-
-msgid "Username"
-msgstr "Nombre de usuario"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"uShare es un servidor UPnP (TM) A/V y DLNA. Implementa el componente del "
-"servidor que proporciona a los dispositivos UPnP la información disponible "
-"en los ficheros multimedia."
diff --git a/po/es/uvc_streamer.po b/po/es/uvc_streamer.po
deleted file mode 100644
index ed16567..0000000
--- a/po/es/uvc_streamer.po
+++ /dev/null
@@ -1,43 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-15 23:39+0200\n"
-"Last-Translator: jarre2 <jarre2_es_jose@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Cuadros por segundo"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Resolución"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Ajustes"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Hacer Streaming con Webcam"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Configure una webcam compatible con Linux-UVC Diríjase con su navegador a: "
-"<a href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/es/vnstat.po b/po/es/vnstat.po
deleted file mode 100644
index b91e1bb..0000000
--- a/po/es/vnstat.po
+++ /dev/null
@@ -1,68 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-07 15:08+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: German\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configuration"
-msgstr "Configuración"
-
-msgid "Daily traffic"
-msgstr "Tráfico diario"
-
-msgid "Graphs"
-msgstr "Gráficas"
-
-msgid "Hourly traffic"
-msgstr "Tráfico por horas"
-
-msgid "Monitor selected interfaces"
-msgstr "Monitorizar las interfaces seleccionadas"
-
-msgid "Monthly traffic"
-msgstr "Tráfico mensual"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Todavía no se ha configurado ninguna base de datos. Vaya a la configuración "
-"de VnStat y habilite la monitorización para una o más interfaces."
-
-msgid "Restart VnStat"
-msgstr "Rearrancar VnStat"
-
-msgid "Summary display"
-msgstr "Mostrar Resumen"
-
-msgid "Top 10 display"
-msgstr "Mostrar Top 10"
-
-msgid "Update »"
-msgstr "Actualizar »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Graficas de VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Monitor de trafico de VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat es un monitor de tráfico de red para Linux que mantiene un registro "
-"del trafico de red de la interfaz o interfaces seleccionadas."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "El servicio VnStat ha sido reiniciado"
diff --git a/po/es/voice_core.po b/po/es/voice_core.po
deleted file mode 100644
index 74e2c23..0000000
--- a/po/es/voice_core.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-07-28 23:17+0200\n"
-"Last-Translator: Daniel <danips@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Teléfonos"
-
-msgid "Voice"
-msgstr "Voz"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/es/voice_diag.po b/po/es/voice_diag.po
deleted file mode 100644
index f2f4da2..0000000
--- a/po/es/voice_diag.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-16 00:58+0200\n"
-"Last-Translator: Jose <jarre2_es_jose@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Diagnostics"
-msgstr "Diagnósticos"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Los tipos de diagnósticos disponibles en el dispositivo dependen de los "
-"módulos que ha instalado."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"En este menú hay opciones que permite realizar pruebas de configuración y "
-"funcionamiento de las operaciones de voz en su sistema. Estas opciones se "
-"conocen como diagósticos."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/es/watchcat.po b/po/es/watchcat.po
deleted file mode 100644
index 54fcead..0000000
--- a/po/es/watchcat.po
+++ /dev/null
@@ -1,66 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-23 23:07+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Forced reboot delay"
-msgstr "Espera para forzar reinicio"
-
-msgid "Host address to ping"
-msgstr "Dirección de máquina a la que hacer ping"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"Cada cuánto comprobar la conexión a internet. Por defecto son segundos, pero "
-"puede añadir 'm' para minutos, 'h' para horas o 'd' para días"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"En modo periódico define el período de rearranque. En modo internet define "
-"el mayor período de tiempo sin acceso a internet antes de provocar un "
-"reinicio. Por defecto son segundos, pero puede añadir 'm' para minutos, 'h' "
-"para horas o 'd' para días"
-
-msgid "Operating mode"
-msgstr "Modo de operar"
-
-msgid "Period"
-msgstr "Período"
-
-msgid "Ping host"
-msgstr "Máquina a la que hacer ping"
-
-msgid "Ping period"
-msgstr "Período de ping"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Watchcat permite configurar un reinicio periódico si la conexión a internet "
-"si pierde durante un cierto tiempo."
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"Watchcat provocará por defecto un reinicio suave. Poniendo un valor mayor "
-"que cero se provocará un reinicio completo si el anterior ha fallado"
diff --git a/po/es/wol.po b/po/es/wol.po
deleted file mode 100644
index c2d1b89..0000000
--- a/po/es/wol.po
+++ /dev/null
@@ -1,56 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2012-08-22 21:41+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: none\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Propagar en todas las interfaces"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Elija la máquina a despertar o introduzca su dirección MAC"
-
-msgid "Host to wake up"
-msgstr "Máquina a despertar"
-
-msgid "Network interface to use"
-msgstr "Interfaz de red a utilizar"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"A veces, sólo se inicia una de las dos herramientas. Si una falla, intente "
-"con la otra"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Especifica la interfaz donde se envían los paquetes WoL"
-
-msgid "Starting WoL utility:"
-msgstr "Iniciando utilidad WoL:"
-
-# Wake on LAN es un término habitualmente utilizado en el español para referirse a esa misma función de encendido remoto a través de la red
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LAN permite arrancar ordenadores conectados en una red local de "
-"forma remota."
-
-msgid "Wake up host"
-msgstr "Despertar máquina"
-
-msgid "WoL program"
-msgstr "Programa WoL"
diff --git a/po/es/wshaper.po b/po/es/wshaper.po
deleted file mode 100644
index f586cb4..0000000
--- a/po/es/wshaper.po
+++ /dev/null
@@ -1,57 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-16 01:00+0200\n"
-"PO-Revision-Date: 2012-09-03 18:57+0200\n"
-"Last-Translator: José Vicente <josevteg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "Enlace de bajada"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Ancho de banda de bajada en Kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Máquina o red en notación CIDR."
-
-msgid "Interface"
-msgstr "Interfaz"
-
-msgid "Low priority destination ports"
-msgstr "Puertos de destino de prioridad baja"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Máquinas de prioridad baja (destino)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Máquinas de prioridad baja (origen)"
-
-msgid "Low priority source ports"
-msgstr "Puertos de origen de prioridad baja"
-
-msgid "Uplink"
-msgstr "Enlace de salida"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Ancho de banda de subida en Kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Configuración de Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper modela el tráfico para asegurar latencias bajas al tráfico "
-"interactivo incluso cuando la conexión a Internet esté muy saturada."
diff --git a/po/fr/ahcp.po b/po/fr/ahcp.po
deleted file mode 100644
index 6e3b281..0000000
--- a/po/fr/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-06 13:06+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "Serveur AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP est un protocole d'auto-configuration pour les réseaux IPv6 et double-"
-"pile IPv6/IPv4, destiné à remplacer la recherche de routeur et le service "
-"DHCP sur des réseaux où il est difficile, voire impossible de configurer un "
-"tel serveur pour tous les domaines de diffusion au niveau lien, par exemple "
-"pour des réseaux ad-hoc mobiles."
-
-msgid "Active AHCP Leases"
-msgstr "Baux AHCP actifs"
-
-msgid "Address"
-msgstr "Adresse"
-
-msgid "Advanced Settings"
-msgstr "Paramètres avancés"
-
-msgid "Age"
-msgstr "Age"
-
-msgid "Announced DNS servers"
-msgstr "Serveurs DNS publiés"
-
-msgid "Announced NTP servers"
-msgstr "Serveurs NTP publiés"
-
-msgid "Announced prefixes"
-msgstr "Préfixes publiés"
-
-msgid "Collecting data..."
-msgstr "Récupération des données…"
-
-msgid "Forwarder"
-msgstr "Transmetteur"
-
-msgid "General Setup"
-msgstr "Paramètres principaux"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 et IPv6"
-
-msgid "IPv4 only"
-msgstr "IPv4 seulement"
-
-msgid "IPv6 only"
-msgstr "IPv6 seulement"
-
-msgid "Lease directory"
-msgstr "Répertoire d'un bail"
-
-msgid "Lease validity time"
-msgstr "Date de validité d'un bail"
-
-msgid "Log file"
-msgstr "Fichier journal"
-
-msgid "Multicast address"
-msgstr "Adresse multidiffusion"
-
-msgid "Operation mode"
-msgstr "Mode de fonctionnement"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Famille de protocole"
-
-msgid "Served interfaces"
-msgstr "Interfaces gérés"
-
-msgid "Server"
-msgstr "Serveur"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Décrit les serveurs NTP IPv4 et IPv6 publiés"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Décrit les serveurs de noms IPv4 et IPv6 publiés"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Décrit les préfixes réseaux IPv4 et IPv6 publiés en notation CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr "Le service AHCP n'est pas en fonctionnement."
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "Le service AHCP est en fonctionnement avec l'ID s."
-
-msgid "There are no active leases."
-msgstr "Il n'y a aucun bail actif."
-
-msgid "Unique ID file"
-msgstr "Fichier de l'ID unique"
diff --git a/po/fr/asterisk.po b/po/fr/asterisk.po
deleted file mode 100644
index 75c1d38..0000000
--- a/po/fr/asterisk.po
+++ /dev/null
@@ -1,569 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-11-23 22:34+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Paramètres généraux d'Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Répertoire AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Mes les sons enregistrés en cache pendant l'enregistrement"
-
-#~ msgid "Debug Level"
-#~ msgstr "Niveau de déboguage"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Désactiver certaines alertes"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Créer une image-core en cas de crash"
-
-#~ msgid "High Priority"
-#~ msgstr "Priorité haute"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Initialise le chiffrage"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Utiliser un délai interne"
-
-#~ msgid "Log directory"
-#~ msgstr "Répertoire des journaux"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Nombre maximum d'appels autorisés"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Charge maximum jusqu'à laquelle on accepte de nouveaux appels"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Désactiver les couleurs de la console"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Répertoire de cache des ficihers-sons"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Exécuté avec ce groupe"
-
-#~ msgid "The User to run as"
-#~ msgstr "Exécuté avec cet utilisateur"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Répertoire de stockage du répondeur"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Préfixer le « UniquID » avec le nom du système"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "Construire des chemins de traduction via SLINEAR, pas directement"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Transmettre le silence SLINEAR lors de l'enregistrement d'un canal"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Niveau de verbosité"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Section du plan de numérotation"
-
-#~ msgid "include"
-#~ msgstr "Inclure"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Extension du plan de numérotation"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Paramètres généraux du plan de numérotation"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Permettre le transfert"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Effacer les variables globales"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Règles d'aiguillage pour la conférence"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Règles d'aiguillage liées au temps"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Règles d'aiguillage de la messagerie vocale"
-
-#~ msgid "Match International prefix"
-#~ msgstr "Préfixe correspondant à l'international"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Préfixe (0) à ajouter à/retirer d'un numéro international"
-
-#~ msgid "localzone"
-#~ msgstr "zone locale"
-
-#~ msgid "Match plan"
-#~ msgstr "Règle de correspondance"
-
-#~ msgid "Connection to use"
-#~ msgstr "Connexion à utiliser"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "Touche de transfert en aveugle"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Touche pour déconnecter un appel"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Touche pour parquer un appel"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Capacité de mise en parking"
-
-#~ msgid "ADSI Park"
-#~ msgstr "Parking ADSI"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "Délai max d'un transfert programmé (secondes)"
-
-#~ msgid "Name of call context for parking"
-#~ msgstr "Nom du contexte d'appel pour une mise en parking"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Fichier-son à jouer aux appelants mis en parking"
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr ""
-#~ "Durée max (en ms) entre les chiffres pour l'activation d'une commande"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Méthode pour trouver une place de parking"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Jouer une tonalité de courtoisie à"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Activer la mise en parking"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Durée de mise en parking (secondes)"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Attente en secondes entre les chiffres Lors d'un transfert"
-
-#~ msgid "sound when attended transfer is complete"
-#~ msgstr "Son joué quand un transfert programmé est effectué"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "Son joué quand nu transfert programmé rate"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Relit la configuration matérielle"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Méthode de redémarrage"
-
-#~ msgid "Parameter"
-#~ msgstr "Paramètre"
-
-#~ msgid "Option type"
-#~ msgstr "Type d'option"
-
-#~ msgid "User name"
-#~ msgstr "Nom d'utilisateur"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Paramètres généraux du protocole IAX"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Codecs autorisés"
-
-#~ msgid "Static"
-#~ msgstr "Statique"
-
-#~ msgid "Write Protect"
-#~ msgstr "Protection contre l'écriture"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Conférence « Meetme »"
-
-#~ msgid "Admin PIN"
-#~ msgstr "ID d'administrateur"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "Code de conférence"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Options générales de conférence « Meetme »"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Nombre de buffers audio de 20 ms à utiliser"
-
-#~ msgid "Modules"
-#~ msgstr "Modules"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Application de réception d'alarme"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Application d'authentification"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "S'assure qu'Asterisk ne sauve pas le CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Vérifie que le canal est libre"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Écoute sur n'importe quel canal"
-
-#~ msgid "Database access functions"
-#~ msgstr "Fonctions d'accès aux bases de données"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Application de numérotation"
-
-#~ msgid "Virtual Dictation Machine Application"
-#~ msgstr "Application de dictaphone virtuel"
-
-#~ msgid "Dump channel variables Application"
-#~ msgstr "Application de copie des variables d'un canal"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Application de simple écho"
-
-#~ msgid "ENUM Lookup"
-#~ msgstr "Résolution d'un ENUM"
-
-#~ msgid "Reevaluates strings"
-#~ msgstr "Ré-évaluer les chaînes"
-
-#~ msgid "Executes applications"
-#~ msgstr "Lance les applications"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "Interface d'application SVI externe"
-
-#~ msgid "Fork The CDR into 2 seperate entities"
-#~ msgstr "Dupliquer le CDR en deux entités séparées"
-
-#~ msgid "Get ADSI CPE ID"
-#~ msgstr "Obtenir le « ADSI CPE ID »"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Fonctions de gestion des groupes"
-
-#~ msgid "Encode and Stream via icecast and ices"
-#~ msgstr "Coder et diffuser via icecast et ices"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Application d'envoi d'image"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr "Rechercher le nom de l'appelant dans la base locale"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Macros d'extension"
-
-#~ msgid "A simple math Application"
-#~ msgstr "Une simple application mathématique"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "Application de signature MD5"
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Enregistre un appelle et mixe le son pendant l'enregistrement"
-
-#~ msgid "Call Parking and Announce Application"
-#~ msgstr "Application de mise en parking d'appel et annonce"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Application de simple écoute"
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Nécessite d'entrer un numéro de téléphone"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "Véritable sérialisation des appels"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Application de lecture d'une variable"
-
-#~ msgid "Read in a file"
-#~ msgstr "Lire dans un fichier"
-
-#~ msgid "Realtime Data Lookup/Rewrite"
-#~ msgstr "Recherche/ré-écriture de données en temps-réel"
-
-#~ msgid "Trivial Record Application"
-#~ msgstr "Application de simple enregistrement"
-
-#~ msgid "Say time"
-#~ msgstr "Dis l'heure"
-
-#~ msgid "Send DTMF digits Application"
-#~ msgstr "Application d'envoi de chiffres en DTMF"
-
-#~ msgid "Send Text Applications"
-#~ msgstr "Applications d'envoi de texte"
-
-#~ msgid "Set CallerID Application"
-#~ msgstr "Application de positionnement de l'identifiant de l'appelant"
-
-#~ msgid "load => .so ; Set CallerID Name"
-#~ msgstr ""
-#~ "charger => .so ; Positionner le nom dans l'identifiant de l'appelant"
-
-#~ msgid "load => .so ; Set CallerID Number"
-#~ msgstr ""
-#~ "charger => .so ; Positionner le numéro dans l'identifiant de l'appelant"
-
-#~ msgid "Set RDNIS Number"
-#~ msgstr "Positionner le numéro RDNIS"
-
-#~ msgid "Set ISDN Transfer Capability"
-#~ msgstr "Activer la possibilité de transfert RNIS"
-
-#~ msgid "SMS/PSTN handler"
-#~ msgstr "Gestionnaire SMS/RTC"
-
-#~ msgid "Hangs up the requested channel"
-#~ msgstr "Raccroche le canal demandé"
-
-#~ msgid "Stack Routines"
-#~ msgstr "Empile les routines"
-
-#~ msgid "Generic System() application"
-#~ msgstr "Application générique System()"
-
-#~ msgid "Playback with Talk Detection"
-#~ msgstr "Jouer un son avec la détection de parole"
-
-#~ msgid "Interface Test Application"
-#~ msgstr "Application de test d'interface"
-
-#~ msgid "Transfer"
-#~ msgstr "Transfert"
-
-#~ msgid "Send URL Applications"
-#~ msgstr "Applications d'envois d'URL"
-
-#~ msgid "Send verbose output"
-#~ msgstr "Envoyer une sortie détaillée"
-
-#~ msgid "Voicemail"
-#~ msgstr "Répondeur"
-
-#~ msgid "Wait For Silence Application"
-#~ msgstr "Application d'attente de silence"
-
-#~ msgid "Session Initiation Protocol (SIP)"
-#~ msgstr "Session Initiation Protocol (SIP)"
-
-#~ msgid "Adaptive Differential PCM Coder/Decoder"
-#~ msgstr "Codec PCM différentiel adaptatif (ADPCM)"
-
-#~ msgid "A-law Coder/Decoder"
-#~ msgstr "Codec loi-A"
-
-#~ msgid "A-law and Mulaw direct Coder/Decoder"
-#~ msgstr "Codec loi-A et loi-Mu directs"
-
-#~ msgid "ITU G.726-32kbps G726 Transcoder"
-#~ msgstr "Transcodeur G726 (ITU G.726 32 kbit/s)"
-
-#~ msgid "GSM/PCM16 (signed linear) Codec Translation"
-#~ msgstr "Codec de traduction GSM/PCM16 (linéaire signé)"
-
-#~ msgid "Speex/PCM16 (signed linear) Codec Translator"
-#~ msgstr "Codec de traduction Speex/PCM16 (linéaire signé)"
-
-#~ msgid "Mu-law Coder/Decoder"
-#~ msgstr "Codec loi-Mu"
-
-#~ msgid "Sun Microsystems AU format (signed linear)"
-#~ msgstr "Format Sun Microsystems AU (linéaire signé)"
-
-#~ msgid "G.723.1 Simple Timestamp File Format"
-#~ msgstr "Format de fichier G.723.1 à horodatage simple"
-
-#~ msgid "Raw G.726 (16/24/32/40kbps) data"
-#~ msgstr "Données brutes G.726 (16/24/32/40 kbit/s)"
-
-#~ msgid "Raw G729 data"
-#~ msgstr "Données brutes G729"
-
-#~ msgid "Raw GSM data"
-#~ msgstr "Données brutes GSM"
-
-#~ msgid "Raw h263 data"
-#~ msgstr "Données brutes h263"
-
-#~ msgid "JPEG (Joint Picture Experts Group) Image"
-#~ msgstr "Image JPEG (Joint Picture Experts Group)"
-
-#~ msgid "Raw uLaw 8khz Audio support (PCM)"
-#~ msgstr "Gestion de l'audio en loi-µ 8 kHz brute (PCM)"
-
-#~ msgid "load => .so ; Raw aLaw 8khz PCM Audio support"
-#~ msgstr "Charger => .so ; Gestion de l'audio en loi-A brute PCM 8 kHz"
-
-#~ msgid "Raw Signed Linear Audio support (SLN)"
-#~ msgstr "Gestion de l'audio en linéaire signé brut (SLN)"
-
-#~ msgid "Dialogic VOX (ADPCM) File Format"
-#~ msgstr "Format de fichier Dialogic VOX (ADPCM)"
-
-#~ msgid "Microsoft WAV format (8000hz Signed Line"
-#~ msgstr "Format Microsoft WAV (8 kHz linéaire signé)"
-
-#~ msgid "Microsoft WAV format (Proprietary GSM)"
-#~ msgstr "Format Microsoft WAV (GSM propriétaire)"
-
-#~ msgid "Caller ID related dialplan functions"
-#~ msgstr "Fonctions d'aiguillage des appels liées à l'identifiant d'appel"
-
-#~ msgid "ENUM Functions"
-#~ msgstr "Fonctions ENUM"
-
-#~ msgid "URI encoding / decoding functions"
-#~ msgstr "Fonctions de codage/décodage des URI"
-
-#~ msgid "Asterisk Extension Language Compiler"
-#~ msgstr "Compilateur du langage d'extension d'Asterisk"
-
-#~ msgid "Text Extension Configuration"
-#~ msgstr "Configuration de l'extension Texte"
-
-#~ msgid "load => .so ; Builtin dialplan functions"
-#~ msgstr "charger => .so ; fonctions natives d'aiguillages des appels"
-
-#~ msgid "Outgoing Spool Support"
-#~ msgstr "Gestion d'un spool sortant"
-
-#~ msgid "Wil Cal U (Auto Dialer)"
-#~ msgstr "Wil Cal U (composeur automatique)"
-
-#~ msgid "MySQL Config Resource"
-#~ msgstr "Ressource de configuration de MySQL"
-
-#~ msgid "ODBC Config Resource"
-#~ msgstr "Ressource de configuration d'ODBC"
-
-#~ msgid "PGSQL Module"
-#~ msgstr "Module PGSQL"
-
-#~ msgid "Cryptographic Digital Signatures"
-#~ msgstr "Signatures de chiffrage numérique"
-
-#~ msgid "Call Parking Resource"
-#~ msgstr "Ressource de mise en parking des appels"
-
-#~ msgid "Call Monitoring Resource"
-#~ msgstr "Ressource de supervision des appels"
-
-#~ msgid "Music On Hold Resource"
-#~ msgstr "Ressource de mise en attente musicale"
-
-#~ msgid "ODBC Resource"
-#~ msgstr "Ressource ODBC"
-
-#~ msgid "SMDI Module"
-#~ msgstr "Module SMDI"
-
-#~ msgid "SNMP Module"
-#~ msgstr "Module SNMP"
-
-#~ msgid "Music On Hold"
-#~ msgstr "Mise en attente musicale"
-
-#~ msgid "Application"
-#~ msgstr "Application"
-
-#~ msgid "Directory of Music"
-#~ msgstr "Répertoire sonore"
-
-#~ msgid "Random Play"
-#~ msgstr "morceau choisi aléatoirement"
-
-#~ msgid "DTMF mode"
-#~ msgstr "Mode DTMF"
-
-#~ msgid "Primary domain identity for From: headers"
-#~ msgstr "Identité du domaine primaire pour les entêtes « From: »"
-
-#~ msgid "From user (required by many SIP providers)"
-#~ msgstr "Utilisateur « From » (requis par de nombreux fournisseurs SIP)"
-
-#~ msgid "Allow Insecure for"
-#~ msgstr "Autoriser le mode non sécurisé pour"
-
-#~ msgid "Mailbox for MWI"
-#~ msgstr "Boîte aux lettres pour MWI"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "NAT entre le téléphone et Asterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "Vérifier les « tags » dans les entêtes"
-
-#~ msgid "Reply Timeout (ms) for down connection"
-#~ msgstr "Délai de réponse (en ms) indiquant une connexion tombée"
-
-#~ msgid "Register connection"
-#~ msgstr "Connexion au registre"
-
-#~ msgid "Client Type"
-#~ msgstr "Type de client"
-
-#~ msgid "Username"
-#~ msgstr "Nom d'utilisateur"
-
-#~ msgid "Section sipgeneral"
-#~ msgstr "Section générale SIP"
-
-#~ msgid "Allow codecs"
-#~ msgstr "Codecs autorisés"
-
-#~ msgid "SIP realm"
-#~ msgstr "Domaine SIP"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "Options générales de la messagerie vocale"
-
-#~ msgid "From Email address of server"
-#~ msgstr "Adresse de courrier électronique source du serveur"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "Boîtes de messagerie vocale"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "Courriel contenant une pièce-jointe"
-
-#~ msgid "Email"
-#~ msgstr "Courriel"
-
-#~ msgid "Display Name"
-#~ msgstr "Nom affiché"
-
-#~ msgid "Password"
-#~ msgstr "Mot de passe"
-
-#~ msgid "zone"
-#~ msgstr "zone"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Paramètres de la zone Voix"
-
-#~ msgid "Message Format"
-#~ msgstr "Format de message"
diff --git a/po/fr/base.po b/po/fr/base.po
deleted file mode 100644
index ee90e27..0000000
--- a/po/fr/base.po
+++ /dev/null
@@ -1,3919 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-11-06 16:16+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(fenêtre de %d minutes, intervalle de %d secondes)"
-
-msgid "(%s available)"
-msgstr "(%s disponible)"
-
-msgid "(empty)"
-msgstr "(vide)"
-
-msgid "(no interfaces attached)"
-msgstr "(pas d'interface connectée)"
-
-msgid "-- Additional Field --"
-msgstr "-- Champ Supplémentaire --"
-
-msgid "-- Please choose --"
-msgstr "-- Choisir --"
-
-msgid "-- custom --"
-msgstr "-- autre --"
-
-msgid "1 Minute Load:"
-msgstr "Charge sur 1 minute :"
-
-msgid "15 Minute Load:"
-msgstr "Charge sur 15 minutes :"
-
-msgid "40MHz 2nd channel above"
-msgstr "2ème canal 40MHz supérieur"
-
-msgid "40MHz 2nd channel below"
-msgstr "2ème canal 40MHz inférieur"
-
-msgid "5 Minute Load:"
-msgstr "Charge sur 5 minutes :"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "Port des requêtes <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "Port du serveur <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"Les serveurs <abbr title=\"Domain Name System\">DNS</abbr> seront<br/"
-">interrogés dans l'ordre du fichier de résolution"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Adresse <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "Passerelle <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "Masque réseau <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"Adresse ou réseau <abbr title=\"Internet Protocol Version 6\">IPv6</abbr> "
-"(notation CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "Passerelle <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr ""
-"Configuration des <abbr title=\"Diode Électro-Luminescente\">DEL</abbr>s"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Nom de la <abbr title=\"Diode Électro-Luminescente\">DEL</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Adresse <abbr title=\"Media Access Control\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"Nombre de baux <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> maximum"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"taille maximum des paquets <abbr title=\"Extension Mechanisms for Domain "
-"Name System\">EDNS0</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "Maximum de requêtes concurrentes"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "Gestion du mode AR"
-
-msgid "ARP retry threshold"
-msgstr "Niveau de ré-essai ARP"
-
-msgid "ATM Bridges"
-msgstr "Ponts ATM"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-"Identifiant de canal virtuel (<abbr title=\"Virtual Channel Idendifier"
-"\">VCI</abbr>) ATM"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-"Identifiant de chemin virtuel (<abbr title=\"Virtual Path Idendifier\">VPI</"
-"abbr>) ATM"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"Les ponts ATM présentent l'Ethernet encapsulé dans des connexions AAL5 comme "
-"des interfaces réseau virtuelles Linux qui peuvent être utilisées avec DHCP "
-"ou PPP pour se connecter au réseau du fournisseur d'accès."
-
-msgid "ATM device number"
-msgstr "Numéro de périphérique ATM"
-
-msgid "Accept router advertisements"
-msgstr "Accepter les publications du routeur"
-
-msgid "Access Concentrator"
-msgstr "Concentrateur d'accès"
-
-msgid "Access Point"
-msgstr "Point d'accès"
-
-msgid "Action"
-msgstr "Action"
-
-msgid "Actions"
-msgstr "Actions"
-
-msgid "Activate this network"
-msgstr "Activer ce réseau"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Routes <abbr title=\"Internet Protocol Version 4\">IPv4</abbr> actives"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Routes <abbr title=\"Internet Protocol Version 6\">IPv6</abbr> actives"
-
-msgid "Active Connections"
-msgstr "Connexions actives"
-
-msgid "Active DHCP Leases"
-msgstr "Bails DHCP actifs"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Bails DHCPv6 actifs"
-
-msgid "Ad-Hoc"
-msgstr "Ad-hoc"
-
-msgid "Add"
-msgstr "Ajouter"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-"Ajouter le suffixe du domaine local aux noms résolus d'après le fichier hosts"
-
-msgid "Add new interface..."
-msgstr "Ajout d'une nouvelle interface..."
-
-msgid "Additional Hosts files"
-msgstr "Fichiers hosts supplémetaires"
-
-msgid "Address"
-msgstr "Adresse"
-
-msgid "Address to access local relay bridge"
-msgstr "Adresse pour accéder au pont-relais local"
-
-msgid "Administration"
-msgstr "Administration"
-
-msgid "Advanced Settings"
-msgstr "Paramètres avancés"
-
-msgid "Advertise IPv6 on network"
-msgstr "Publier l'adressage IPv6 sur le réseau"
-
-msgid "Advertised network ID"
-msgstr "ID réseau publiée"
-
-msgid "Alert"
-msgstr "Alerte"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Autoriser l'authentification <abbr title=\"Secure Shell\">SSH</abbr> par mot "
-"de passe"
-
-msgid "Allow all except listed"
-msgstr "Autoriser tout sauf ce qui est listé"
-
-msgid "Allow listed only"
-msgstr "Autoriser seulement ce qui est listé"
-
-msgid "Allow localhost"
-msgstr "Autoriser l'hôte local"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Permettre à des hôtes distants de se conecter à des ports SSH locaux "
-"correspondants (« forwarded »)"
-
-msgid "Allow root logins with password"
-msgstr "Autoriser les connexions administrateur avec mot de passe"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-"Autoriser l'utilisateur <em>root</em> à se connecter avec un mot de passe"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Autorise les réponses de l'amont dans la plage 127.0.0.0/8, par ex. pour les "
-"services RBL"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "La gamme autorisée va de 1 à 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Un réseau supplémentaire sera créé si vous laissé ceci décoché."
-
-msgid "Antenna 1"
-msgstr "Antenne 1"
-
-msgid "Antenna 2"
-msgstr "Antenne 2"
-
-msgid "Antenna Configuration"
-msgstr "Configuration de l'antenne"
-
-msgid "Any zone"
-msgstr "N'importe quelle zone"
-
-msgid "Apply"
-msgstr "Appliquer"
-
-msgid "Applying changes"
-msgstr "Changements en cours"
-
-msgid "Assign interfaces..."
-msgstr "Affecte les interfaces…"
-
-msgid "Associated Stations"
-msgstr "Équipements associés"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Contrôleur sans fil Atheros 802.11%s "
-
-msgid "Authentication"
-msgstr "Authentification"
-
-msgid "Authoritative"
-msgstr "Autoritaire"
-
-msgid "Authorization Required"
-msgstr "Autorisation requise"
-
-msgid "Auto Refresh"
-msgstr "Rafraîchissement automatique"
-
-msgid "Available"
-msgstr "Disponible"
-
-msgid "Available packages"
-msgstr "Paquets disponibles"
-
-msgid "Average:"
-msgstr "Moyenne :"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Retour"
-
-msgid "Back to Overview"
-msgstr "Retour à la vue générale"
-
-msgid "Back to configuration"
-msgstr "Retour à la configuration"
-
-msgid "Back to overview"
-msgstr "Retour à la vue générale"
-
-msgid "Back to scan results"
-msgstr "Retour aux résultats de la recherche"
-
-msgid "Background Scan"
-msgstr "Recherche en arrière-plan"
-
-msgid "Backup / Flash Firmware"
-msgstr "Sauvegarde / Mise à jour du micrologiciel"
-
-msgid "Backup / Restore"
-msgstr "Sauvegarder / Restaurer"
-
-msgid "Backup file list"
-msgstr "Liste des fichiers de sauvegarde"
-
-msgid "Bad address specified!"
-msgstr "Adresse spécifiée incorrecte!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Voici la liste des fichiers à sauvegarder. Elle est constituée des fichiers "
-"de configuration modifiés marqués par opkg, des fichiers de base essentiels, "
-"et des motifs de sauvegarde définis par l'utilisateur."
-
-msgid "Bitrate"
-msgstr "Débit"
-
-msgid "Bogus NX Domain Override"
-msgstr "Contourne les «  NX Domain » bogués"
-
-msgid "Bridge"
-msgstr "Pont"
-
-msgid "Bridge interfaces"
-msgstr "Interfaces en pont"
-
-msgid "Bridge unit number"
-msgstr "Numéro d'unité du pont"
-
-msgid "Bring up on boot"
-msgstr "L'activer au démarrage"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Contrôleur sans fil Broadcom 802.11%s"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Contrôleur sans fil Broadcom BCM%04x 802.11"
-
-msgid "Buffered"
-msgstr "Temporisé"
-
-msgid "Buttons"
-msgstr "Boutons"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "Utilisation CPU (%)"
-
-msgid "Cached"
-msgstr "Mis en cache"
-
-msgid "Cancel"
-msgstr "Annuler"
-
-msgid "Chain"
-msgstr "Chaîne"
-
-msgid "Changes"
-msgstr "Changements"
-
-msgid "Changes applied."
-msgstr "Changements appliqués."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Change le mot de passe administrateur pour accéder à l'équipement"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check"
-msgstr "Vérification"
-
-msgid "Checksum"
-msgstr "Somme de contrôle"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Choisissez la zone de pare-feu à laquelle vous voulez affecter cette "
-"interface. Sélectionnez <em>non précisé</em> pour retirer l'interface de la "
-"zone associée, ou remplissez le champ <em>créer</em> pour définir une "
-"nouvelle zone et y inclure cette interface."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Choisissez le(s) réseau(x)  que vous souhaitez attachez a cette interface "
-"sans-fil ou remplissez le <em>créer</em>  champ pour définir un nouveau "
-"réseau. "
-
-msgid "Cipher"
-msgstr "Code de chiffrement"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Cliquer sur \"Construire l'archive\" pour télécharger une archive tar des "
-"fichiers de la configuration actuelle. Pour réinitialiser le micrologiciel "
-"dans son état initial, cliquer sur \"Réinitialiser\" (possible seulement "
-"avec les images de type squashfs)."
-
-msgid "Client"
-msgstr "Client"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "Identifiant client à envoyer dans les requêtes DHCP"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Fermer une connexion inactive après le délai donné en secondes, mettre 0 "
-"pour garder les connexions"
-
-msgid "Close list..."
-msgstr "Fermer la liste…"
-
-msgid "Collecting data..."
-msgstr "Récupération de données..."
-
-msgid "Command"
-msgstr "Commande"
-
-msgid "Common Configuration"
-msgstr "Configuration commune"
-
-msgid "Compression"
-msgstr "Compression"
-
-msgid "Configuration"
-msgstr "Configuration"
-
-msgid "Configuration applied."
-msgstr "Configuration appliquée."
-
-msgid "Configuration files will be kept."
-msgstr "Les fichiers de configuration seront préservés."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Configure ce point de montage comme remplacement externe du système de "
-"fichier racine"
-
-msgid "Confirmation"
-msgstr "Confirmation"
-
-msgid "Connect"
-msgstr "Se connecter"
-
-msgid "Connected"
-msgstr "Connecté"
-
-msgid "Connection Limit"
-msgstr "Limite de connexion"
-
-msgid "Connections"
-msgstr "Connexions"
-
-msgid "Country"
-msgstr "Pays"
-
-msgid "Country Code"
-msgstr "Code pays"
-
-msgid "Cover the following interface"
-msgstr "Couvre l'interface suivante"
-
-msgid "Cover the following interfaces"
-msgstr "Couvre les interfaces suivantes"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Créer / Assigner une zone du pare-feu"
-
-msgid "Create Interface"
-msgstr "Créer une interface"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Créer un pont par dessus plusieurs interfaces"
-
-msgid "Critical"
-msgstr "Critique"
-
-msgid "Cron Log Level"
-msgstr "Niveau de journalisation de Cron"
-
-msgid "Custom Interface"
-msgstr "Interface spécifique"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Personnaliser le comportement des <abbr title=\"Diode Électro-Luminescente"
-"\">DEL</abbr>s si possible."
-
-msgid "DHCP Leases"
-msgstr "Baux DHCP"
-
-msgid "DHCP Server"
-msgstr "Serveur DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP et DNS"
-
-msgid "DHCP client"
-msgstr "client DHCP"
-
-msgid "DHCP-Options"
-msgstr "Options DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "Bails DHCPv6"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "transmissions DNS"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Deboguage"
-
-msgid "Default %d"
-msgstr "%d par défaut"
-
-msgid "Default gateway"
-msgstr "Passerelle par défaut"
-
-msgid "Default state"
-msgstr "État par défaut"
-
-msgid "Define a name for this network."
-msgstr "Donne un nom à ce réseau."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Définir des options DHCP supplémentaires, par exemple "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" qui publie différents serveurs "
-"DNS à ses clients."
-
-msgid "Delete"
-msgstr "Effacer"
-
-msgid "Delete this interface"
-msgstr "Supprimer cette interface"
-
-msgid "Delete this network"
-msgstr "Supprimer ce réseau"
-
-msgid "Description"
-msgstr "Description"
-
-msgid "Design"
-msgstr "Apparence"
-
-msgid "Destination"
-msgstr "Destination"
-
-msgid "Device"
-msgstr "Équipement"
-
-msgid "Device Configuration"
-msgstr "Configuration de l'équipement"
-
-msgid "Diagnostics"
-msgstr "Diagnostics"
-
-msgid "Directory"
-msgstr "Répertoire"
-
-msgid "Disable"
-msgstr "Désactiver"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Désactiver <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-"pour cette interface."
-
-msgid "Disable DNS setup"
-msgstr "Désactiver la configuration DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Désactiver l'émission périodique de balises wifi (« HW-Beacon »)"
-
-msgid "Disabled"
-msgstr "Désactivé"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Jeter les réponses en RFC1918 amont"
-
-msgid "Displaying only packages containing"
-msgstr "N'afficher que les paquets contenant"
-
-msgid "Distance Optimization"
-msgstr "Optimisation de la distance"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distance au membre du réseau le plus éloigné, en mètres."
-
-msgid "Diversity"
-msgstr "Diversité"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq est un serveur <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> combiné à un relais <abbr title=\"Domain Name System\">DNS</"
-"abbr> pour les pare-feu <abbr title=\"Network Address Translation\">NAT</"
-"abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-"Ne pas mettre en cache les réponses négatives, par ex. pour des domaines "
-"inexistants"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Ne pas transmettre les requêtes qui ne peuvent être résolues par les "
-"serveurs de noms publics"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-"Ne pas transmettre les requêtes de recherche inverse pour les réseaux locaux"
-
-msgid "Do not send probe responses"
-msgstr "Ne pas envoyer de réponses de test"
-
-msgid "Domain required"
-msgstr "Domaine nécessaire"
-
-msgid "Domain whitelist"
-msgstr "Liste blanche de domaines"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Ne pas transmettre de requêtes <abbr title=\"Domain Name System\">DNS</abbr> "
-"sans nom <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "Download and install package"
-msgstr "Télécharge et installe le paquet"
-
-msgid "Download backup"
-msgstr "Télécharger la sauvegarde"
-
-msgid "Dropbear Instance"
-msgstr "Session Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear est un serveur <abbr title=\"Secure Shell\">SSH</abbr> et intègre "
-"un serveur <abbr title=\"Secure Copy\">SCP</abbr>"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> dynamique"
-
-msgid "Dynamic tunnel"
-msgstr "Tunnel dynamique"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Alloue dynamiquement des adresses pour les clients du DHCP. Si désactivé, "
-"seuls les clients ayant des baux statiques seront gérés."
-
-msgid "EAP-Method"
-msgstr "Méthode EAP"
-
-msgid "Edit"
-msgstr "Éditer"
-
-msgid "Edit this interface"
-msgstr "Éditer cette interface"
-
-msgid "Edit this network"
-msgstr "Éditer ce réseau"
-
-msgid "Emergency"
-msgstr "Urgence"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Activer le protocole <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Activer la mise à jour dynamique de l'extrémité du tunnel chez HE.net"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Activer la négociation IPv6 sur le lien PPP"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Activer la circulation de très grandes trames (Jumbo)"
-
-msgid "Enable NTP client"
-msgstr "Activer client NTP"
-
-msgid "Enable TFTP server"
-msgstr "Activer le serveur TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "Acviter la gestion des VLANs"
-
-msgid "Enable learning and aging"
-msgstr "Activer l'apprentissage et la péremption"
-
-msgid "Enable this mount"
-msgstr "Activer ce montage"
-
-msgid "Enable this swap"
-msgstr "Activer cette mémoire d'échange (swap)"
-
-msgid "Enable/Disable"
-msgstr "Activer/Désactiver"
-
-msgid "Enabled"
-msgstr "Activé"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-"Activer le protocole <abbr title=\"Spanning Tree Protocol\">STP</abbr> sur "
-"ce pont"
-
-msgid "Encapsulation mode"
-msgstr "Mode encapsulé"
-
-msgid "Encryption"
-msgstr "Chiffrement"
-
-msgid "Erasing..."
-msgstr "Effacement…"
-
-msgid "Error"
-msgstr "Erreur"
-
-msgid "Ethernet Adapter"
-msgstr "Module Ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Commutateur Ethernet"
-
-msgid "Expand hosts"
-msgstr "Étendre le nom d'hôte"
-
-msgid "Expires"
-msgstr "Expire"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Délai d'expiration des adresses allouées, le minimum est de 2 minutes "
-"(<code>2m</code>)."
-
-msgid "External system log server"
-msgstr "Serveur distant de journaux système"
-
-msgid "External system log server port"
-msgstr "Port du serveur distant de journaux système"
-
-msgid "Fast Frames"
-msgstr "Trames rapides"
-
-msgid "File"
-msgstr "Fichier"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Nom de fichier d'une image de démarrage publiée aux clients"
-
-msgid "Filesystem"
-msgstr "Système de fichiers"
-
-msgid "Filter"
-msgstr "Filtrer"
-
-msgid "Filter private"
-msgstr "Filtrer les requêtes privées"
-
-msgid "Filter useless"
-msgstr "Filtrer les requêtes inutiles"
-
-msgid "Find and join network"
-msgstr "Cherche et rejoint un réseau"
-
-msgid "Find package"
-msgstr "Trouver un paquet"
-
-msgid "Finish"
-msgstr "Terminer"
-
-msgid "Firewall"
-msgstr "Pare-feu"
-
-msgid "Firewall Settings"
-msgstr "Paramètres du pare-feu"
-
-msgid "Firewall Status"
-msgstr "État du pare-feu"
-
-msgid "Firmware Version"
-msgstr "Version du micrologiciel"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Port source fixe pour les requêtes DNS sortantes"
-
-msgid "Flags"
-msgstr "Options"
-
-msgid "Flash Firmware"
-msgstr "Mise à jour du micrologiciel"
-
-msgid "Flash image..."
-msgstr "Écriture de l'image…"
-
-msgid "Flash new firmware image"
-msgstr "Écrire l'image du nouveau micrologiciel"
-
-msgid "Flash operations"
-msgstr "Opérations d'écriture"
-
-msgid "Flashing..."
-msgstr "Écriture…"
-
-msgid "Force"
-msgstr "Forcer"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr "Forcer CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Force le DHCP sur ce réseau même si un autre serveur est détecté."
-
-msgid "Force TKIP"
-msgstr "Forcer TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Forcer TKIP et CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Transmettre le trafic DHCP"
-
-msgid "Forward broadcast traffic"
-msgstr "Transmettre le trafic de diffusion"
-
-msgid "Forwarding mode"
-msgstr "Mode de transmission"
-
-msgid "Fragmentation Threshold"
-msgstr "Seuil de fragmentation"
-
-msgid "Frame Bursting"
-msgstr "Rafale de trames"
-
-msgid "Free"
-msgstr "Libre"
-
-msgid "Free space"
-msgstr "Espace libre"
-
-msgid "Frequency Hopping"
-msgstr "Sauts en fréquence"
-
-msgid "GHz"
-msgstr "Ghz"
-
-msgid "GPRS only"
-msgstr "seulement GPRS"
-
-msgid "Gateway"
-msgstr "Passerelle"
-
-msgid "Gateway ports"
-msgstr "Ports de la passerelle"
-
-msgid "General Settings"
-msgstr "Paramètres généraux"
-
-msgid "General Setup"
-msgstr "Configuration générale"
-
-msgid "Generate archive"
-msgstr "Construire l'archive"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Contrôleur sans fil générique 802.11%s"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-"La confirmation du nouveau mot de passe ne correspond pas, changement "
-"annulé !"
-
-msgid "Go to password configuration..."
-msgstr "Aller à la configuration du mot de passe…"
-
-msgid "Go to relevant configuration page"
-msgstr "Aller à la page de configuration correspondante"
-
-msgid "HE.net password"
-msgstr "Mot de passe HE.net"
-
-msgid "HE.net user ID"
-msgstr "Identifiant HE.net"
-
-msgid "HT capabilities"
-msgstr "Capacités HT"
-
-msgid "HT mode"
-msgstr "Mode HT"
-
-msgid "Handler"
-msgstr "Gestionnaire"
-
-msgid "Hang Up"
-msgstr "Signal (HUP)"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Ici, vous pouvez configurer les aspects basiques de votre routeur comme son "
-"nom ou son fuseau horaire."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Vous pouvez copier ici des clés SSH publiques (une par ligne) pour une "
-"authentification SSH sur clés publiques."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Contrôleur sans fil Hermes 802.11b"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Cacher le ESSID"
-
-msgid "Host entries"
-msgstr "Entrées d'hôtes"
-
-msgid "Host expiry timeout"
-msgstr "Délai d'expiration pour les hôtes"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "adresse IP ou réseau"
-
-msgid "Hostname"
-msgstr "Nom d'hôte"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Nom d'hôte à envoyer dans une requête DHCP"
-
-msgid "Hostnames"
-msgstr "Noms d'hôtes"
-
-msgid "IP address"
-msgstr "Adresse IP"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "Pare-feu IPv4"
-
-msgid "IPv4 WAN Status"
-msgstr "État IPv4 du WAN"
-
-msgid "IPv4 address"
-msgstr "Adresse IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 et IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "Diffusion IPv4"
-
-msgid "IPv4 gateway"
-msgstr "Passerelle IPv4"
-
-msgid "IPv4 netmask"
-msgstr "Masque-réseau IPv4"
-
-msgid "IPv4 only"
-msgstr "IPv4 seulement"
-
-msgid "IPv4 prefix length"
-msgstr "longueur du préfixe IPv4"
-
-msgid "IPv4-Address"
-msgstr "Adresse IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "Pare-feu IPv6"
-
-msgid "IPv6 WAN Status"
-msgstr "Était IPv6 du WAN"
-
-msgid "IPv6 address"
-msgstr "Adresse IPv6"
-
-msgid "IPv6 gateway"
-msgstr "Passerelle IPv6"
-
-msgid "IPv6 only"
-msgstr "IPv6 seulement"
-
-msgid "IPv6 prefix"
-msgstr "Préfixe IPv6"
-
-msgid "IPv6 prefix length"
-msgstr "longueur du préfixe IPv6"
-
-msgid "IPv6-Address"
-msgstr "Adresse IPv6"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6 dans IPv4 (RFC 4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6 sur IPv4 (6ème)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6 sur IPv4 (6 vers 4)"
-
-msgid "Identity"
-msgstr "Identité"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Monte le périphérique identifié par cet UUID au lieu d'un nom de "
-"périphérique fixe"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Monte le périphérique identifié par cette étiquette au lieu d'un nom de "
-"périphérique fixe"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Décoché, aucune route par défaut n'est configurée"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr "Décoché, les adresses des serveurs DNS publiés sont ignorées"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Si la mémoire physique n'est pas en quantité suffisante, les données "
-"inutilisées peuvent être temporairement transférée sur une partition "
-"d'échange, relevant la quantité de RAM disponible. Ce processus est lent car "
-"la mémoire d'échange ne peut être accédée aux taux de transfert de la RAM."
-
-msgid "Ignore Hosts files"
-msgstr "Ignorer le fichiers Hosts"
-
-msgid "Ignore interface"
-msgstr "Ignorer l'interface"
-
-msgid "Ignore resolve file"
-msgstr "Ignorer le fichier de résolution"
-
-msgid "Image"
-msgstr "Image"
-
-msgid "In"
-msgstr "Entrée"
-
-msgid "Inactivity timeout"
-msgstr "Délai d'inactivité"
-
-msgid "Inbound:"
-msgstr "Intérieur :"
-
-msgid "Info"
-msgstr "Info"
-
-msgid "Initscript"
-msgstr "Script d'initialisation"
-
-msgid "Initscripts"
-msgstr "Scripts d'initialisation"
-
-msgid "Install"
-msgstr "Installer"
-
-msgid "Install package %q"
-msgstr "Installer le paquet %q"
-
-msgid "Install protocol extensions..."
-msgstr "Installation des extensions de protocole…"
-
-msgid "Installed packages"
-msgstr "Paquets installés"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Interface Configuration"
-msgstr "Configuration de l'interface"
-
-msgid "Interface Overview"
-msgstr "Vue d'ensemble de l'interface"
-
-msgid "Interface is reconnecting..."
-msgstr "L'interface se reconnecte…"
-
-msgid "Interface is shutting down..."
-msgstr "L'interface s'arrête…"
-
-msgid "Interface not present or not connected yet."
-msgstr "L'interface n'est pas présente ou pas encore connectée."
-
-msgid "Interface reconnected"
-msgstr "Interface reconnectée"
-
-msgid "Interface shut down"
-msgstr "Interface arrêtée"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internal Server Error"
-msgstr "Erreur Serveur Interne"
-
-msgid "Invalid"
-msgstr "Erreur : donnée entrée invalide"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-"Identifiant VLAN invalide !Seuls les IDs entre %d et %d sont autorisés."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-"Identifiant VLAN donné invalide ! Seuls les identifiants uniques sont "
-"autorisés"
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Nom d'utilisateur et/ou mot de passe invalides ! Réessayez !"
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Il semble que vous essayez de programmer votre routeur avec une image qui ne "
-"tient pas dans sa mémoire flash, vérifiez s'il vous plait votre fichier-"
-"image !"
-
-msgid "Java Script required!"
-msgstr "Nécessite un Script Java !"
-
-msgid "Join Network"
-msgstr "Rejoindre un réseau"
-
-msgid "Join Network: Settings"
-msgstr "Rejoindre un réseau : paramètres"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Rejoindre un réseau : recherche des réseaux sans-fil"
-
-msgid "Keep settings"
-msgstr "Garder le paramètrage"
-
-msgid "Kernel Log"
-msgstr "Journal du noyau"
-
-msgid "Kernel Version"
-msgstr "Version du noyau"
-
-msgid "Key"
-msgstr "Clé"
-
-msgid "Key #%d"
-msgstr "Clé n° %d"
-
-msgid "Kill"
-msgstr "Tuer"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "Serveur L2TP"
-
-msgid "LCP echo failure threshold"
-msgstr "Seuil d'erreur des échos LCP"
-
-msgid "LCP echo interval"
-msgstr "Intervalle entre échos LCP"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Étiquette"
-
-msgid "Language"
-msgstr "Langue"
-
-msgid "Language and Style"
-msgstr "Langue et apparence"
-
-msgid "Lease validity time"
-msgstr "Durée de validité d'un bail"
-
-msgid "Leasefile"
-msgstr "Fichier de baux"
-
-msgid "Leasetime"
-msgstr "Durée du bail"
-
-msgid "Leasetime remaining"
-msgstr "Durée de validité"
-
-msgid "Leave empty to autodetect"
-msgstr "Laisser vide pour l'auto-détection"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Laisser vide pour utiliser l'adresse WAN actuelle"
-
-msgid "Legend:"
-msgstr "Légende :"
-
-msgid "Limit"
-msgstr "Limite"
-
-msgid "Link On"
-msgstr "Lien établi"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Liste des serveurs auquels sont transmis les requêtes <abbr title=\"Domain "
-"Name System\">DNS</abbr>"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Liste des domaines où sont permises les réponses de type RFC1918"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-"Liste des hôtes qui fournissent des résultats avec des « NX domain » bogués"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr "Écouter seulement sur l'interface spécifié, sinon sur toutes"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Port d'écoute des requêtes DNS entrantes"
-
-msgid "Load"
-msgstr "Charger"
-
-msgid "Load Average"
-msgstr "Charge moyenne"
-
-msgid "Loading"
-msgstr "Chargement"
-
-msgid "Local IPv4 address"
-msgstr "Adresse IPv4 locale"
-
-msgid "Local IPv6 address"
-msgstr "Adresse IPv6 locale"
-
-msgid "Local Startup"
-msgstr "Démarrage local"
-
-msgid "Local Time"
-msgstr "Heure Locale"
-
-msgid "Local domain"
-msgstr "Domaine local"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Domaine local à préciser. Les noms correspondants à ce domaine ne sont "
-"jamais transmis, mais résolus seulement depuis le serveur DHCP ou le fichier "
-"Hosts"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Suffixe du domaine local ajouté aux noms du serveur DHCP et du fichier Hosts"
-
-msgid "Local server"
-msgstr "Serveur local"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Trouve le nom d'hôte suivant le sous-réseau d'où vient la requête si "
-"plusieurs adresses IPs sont possibles"
-
-msgid "Localise queries"
-msgstr "Localiser les requêtes"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Verrouilé sur le canal %d utilisé par %s"
-
-msgid "Log output level"
-msgstr "Niveau de journalisation"
-
-msgid "Log queries"
-msgstr "Journaliser les requêtes"
-
-msgid "Logging"
-msgstr "Journalisation"
-
-msgid "Login"
-msgstr "Connexion"
-
-msgid "Logout"
-msgstr "Déconnexion"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-"Adresse allouée la plus basse, spécifiée par un décalage à partir de "
-"l'adresse réseau."
-
-msgid "MAC-Address"
-msgstr "Adresse MAC"
-
-msgid "MAC-Address Filter"
-msgstr "Filtrage par adresses MAC"
-
-msgid "MAC-Filter"
-msgstr "Filtrage par adresses MAC"
-
-msgid "MAC-List"
-msgstr "Liste des adresses MAC"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Débit maximum"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Nombre maximum de baux DHCP actifs"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Nombre maximum de requêtes DNS au même moment"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Taille maximum autorisée des paquets UDP EDNS.0"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Délai d'attente maximum que le modem soit prêt"
-
-msgid "Maximum hold time"
-msgstr "Temps de maintien maximum"
-
-msgid "Maximum number of leased addresses."
-msgstr "Nombre maximum d'adresses allouées."
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "Mémoire"
-
-msgid "Memory usage (%)"
-msgstr "Utilisation Mémoire (%)"
-
-msgid "Metric"
-msgstr "Metrique"
-
-msgid "Minimum Rate"
-msgstr "Débit minimum"
-
-msgid "Minimum hold time"
-msgstr "Temps de maintien mimimum"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Extention de protocole manquante pour le proto %q"
-
-msgid "Mode"
-msgstr "Mode"
-
-msgid "Modem device"
-msgstr "Interface Modem"
-
-msgid "Modem init timeout"
-msgstr "Délai max. d'initialisation du modem"
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr "Montage"
-
-msgid "Mount Point"
-msgstr "Point de montage"
-
-msgid "Mount Points"
-msgstr "Point de montage"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Points de montage - élément à monter"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Points de montage - partition d'échange"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Les points de montage définissent l'attachement d'un périphérique au système "
-"de fichier"
-
-msgid "Mount options"
-msgstr "Options de montage"
-
-msgid "Mount point"
-msgstr "Point de montage"
-
-msgid "Mounted file systems"
-msgstr "Systèmes de fichiers montés"
-
-msgid "Move down"
-msgstr "Descendre"
-
-msgid "Move up"
-msgstr "Monter"
-
-msgid "Multicast Rate"
-msgstr "Débit multidiffusion"
-
-msgid "Multicast address"
-msgstr "Adresse multidiffusion"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "Serveurs NTP candidats"
-
-msgid "Name"
-msgstr "Nom"
-
-msgid "Name of the new interface"
-msgstr "Nom de la nouvelle interface"
-
-msgid "Name of the new network"
-msgstr "Nom du nouveau réseau"
-
-msgid "Navigation"
-msgstr "Navigation"
-
-msgid "Netmask"
-msgstr "Masque de réseau"
-
-msgid "Network"
-msgstr "Réseau"
-
-msgid "Network Utilities"
-msgstr "Utilitaires réseau"
-
-msgid "Network boot image"
-msgstr "Image de démarrage réseau"
-
-msgid "Network without interfaces."
-msgstr "Réseau sans interfaces."
-
-msgid "Next »"
-msgstr "Prochain »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Aucun serveur DHCP configuré sur cette interface"
-
-msgid "No chains in this table"
-msgstr "Aucune chaîne dans cette table"
-
-msgid "No files found"
-msgstr "Aucun fichier trouvé"
-
-msgid "No information available"
-msgstr "Information indisponible"
-
-msgid "No negative cache"
-msgstr "Pas de cache négatif"
-
-msgid "No network configured on this device"
-msgstr "Ce périphérique n'a aucune adresse configurée"
-
-msgid "No network name specified"
-msgstr "Aucun nom de réseau donné"
-
-msgid "No package lists available"
-msgstr "Aucune liste de paquets disponible"
-
-msgid "No password set!"
-msgstr "Pas de mot de passe positionné !"
-
-msgid "No rules in this chain"
-msgstr "Aucune règle dans cette chaîne"
-
-msgid "No zone assigned"
-msgstr "Aucune zone attribuée"
-
-msgid "Noise"
-msgstr "Bruit"
-
-msgid "Noise:"
-msgstr "Bruit :"
-
-msgid "None"
-msgstr "Vide"
-
-msgid "Normal"
-msgstr "Normal"
-
-msgid "Not Found"
-msgstr "Pas trouvé"
-
-msgid "Not associated"
-msgstr "Pas associé"
-
-msgid "Not connected"
-msgstr "Non connecté"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Note : les fichiers de configuration seront effacés."
-
-msgid "Notice"
-msgstr "Note"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Configuration OPKG"
-
-msgid "Off-State Delay"
-msgstr "Durée éteinte"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Dans cette page vous pourrez configurer les interfaces réseaux. Vous pouvez "
-"bridger différentes interfaces en cochant le champ \"bridger les interfaces"
-"\" et en saisissant les noms des interfaces réseau séparées par des espaces. "
-"Vous pouvez aussi utiliser la notation VLAN, INTERFACE.VLANNB (ex : eth0.1)."
-
-msgid "On-State Delay"
-msgstr "Durée allumée"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Un ou plusieurs champs contiennent des valeurs incorrectes !"
-
-msgid "One or more required fields have no value!"
-msgstr "Un ou plusieurs champs n'ont pas de valeur !"
-
-msgid "Open list..."
-msgstr "Ouvrir la liste…"
-
-msgid "Option changed"
-msgstr "Option modifiée"
-
-msgid "Option removed"
-msgstr "Option retirée"
-
-msgid "Options"
-msgstr "Options"
-
-msgid "Other:"
-msgstr "Autres :"
-
-msgid "Out"
-msgstr "Sortie"
-
-msgid "Outbound:"
-msgstr "Extérieur :"
-
-msgid "Outdoor Channels"
-msgstr "Canaux en extérieur"
-
-msgid "Override MAC address"
-msgstr "Modifier l'adresse MAC"
-
-msgid "Override MTU"
-msgstr "Modifier le MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Modifier la passerelle dans les réponses DHCP"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Remplacer le masque réseau envoyés aux clients. Il est normalement calculé à "
-"partir du sous-réseau géré."
-
-msgid "Override the table used for internal routes"
-msgstr "Modifier la table utilisée pour les routes internes"
-
-msgid "Overview"
-msgstr "Vue d'ensemble"
-
-msgid "Owner"
-msgstr "Propriétaire"
-
-msgid "PAP/CHAP password"
-msgstr "Mot de passe PAP/CHAP"
-
-msgid "PAP/CHAP username"
-msgstr "Identifiant PAP/CHAP"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "code PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "PPPoA Encapsulation"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "Nécessite le paquet libiwinfo !"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Les listes de paquets ont plus de 24 heures"
-
-msgid "Package name"
-msgstr "Nom du paquet"
-
-msgid "Packets"
-msgstr "Paquets"
-
-msgid "Part of zone %q"
-msgstr "Fait partie de la zone %q"
-
-msgid "Password"
-msgstr "Mot de passe"
-
-msgid "Password authentication"
-msgstr "Authentification par mot de passe"
-
-msgid "Password of Private Key"
-msgstr "Mot de passe de la clé privée"
-
-msgid "Password successfully changed!"
-msgstr "Mot de passe changé avec succès !"
-
-msgid "Path to CA-Certificate"
-msgstr "Chemin de la CA"
-
-msgid "Path to Client-Certificate"
-msgstr "Chemin du certificat-client"
-
-msgid "Path to Private Key"
-msgstr "Chemin de la clé privée"
-
-msgid "Path to executable which handles the button event"
-msgstr "Chemin du programme exécutable gérant les évènements liés au bouton"
-
-msgid "Peak:"
-msgstr "Pic :"
-
-msgid "Perform reboot"
-msgstr "Redémarrer"
-
-msgid "Perform reset"
-msgstr "Réinitialiser"
-
-msgid "Phy Rate:"
-msgstr "Débit de la puce:"
-
-msgid "Physical Settings"
-msgstr "Paramètres physiques"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "Pqts."
-
-msgid "Please enter your username and password."
-msgstr "Saisissez votre nom d'utilisateur et mot de passe."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Patientez s'il vous plaît: équipement en cours de redémarrage..."
-
-msgid "Policy"
-msgstr "Politique"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr "Port %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "Le port %d n'est pas marqué dans plusieurs VLANs !"
-
-msgid "Port status:"
-msgstr "Statut du port :"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Suppose que le distant a disparu une fois le nombre donné d'erreurs d'échos "
-"LCP ; utiliser 0 pour ignorer ces erreurs"
-
-msgid "Prevents client-to-client communication"
-msgstr "Empêche la communication directe entre clients"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Contrôleur sans fil Prism2/2.5/3 802.11b"
-
-msgid "Proceed"
-msgstr "Continuer"
-
-msgid "Processes"
-msgstr "Processus"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protocole"
-
-msgid "Protocol family"
-msgstr "Famille du protocole"
-
-msgid "Protocol of the new interface"
-msgstr "Protocole de la nouvelle interface"
-
-msgid "Protocol support is not installed"
-msgstr "La gestion du protocole n'est pas installée"
-
-msgid "Provide NTP server"
-msgstr "Fournir serveur NTP"
-
-msgid "Provide new network"
-msgstr "Donner un nouveau réseau"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Qualitée"
-
-msgid "RTS/CTS Threshold"
-msgstr "Seuil RTS/CTS"
-
-msgid "RX"
-msgstr "Reçu"
-
-msgid "RX Rate"
-msgstr "Débit en réception"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "Contrôleur sans fil RaLink 802.11%s"
-
-msgid "Radius-Accounting-Port"
-msgstr "Port de la comptabilisation Radius"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Secret de la comptabilisation Radius"
-
-msgid "Radius-Accounting-Server"
-msgstr "Serveur de la comptabilisation Radius"
-
-msgid "Radius-Authentication-Port"
-msgstr "Port de l'authentification Radius"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Secret de l'authentification Radius"
-
-msgid "Radius-Authentication-Server"
-msgstr "Serveur de l'authentification Radius"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr "Lire /etc/ethers pour configurer le serveur DHCP"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Vraiment supprimer cet interface? L'effacement ne peut être annulé!\n"
-"Vous pourriez perdre l'accès à l'équipement si vous y êtes connecté par "
-"cette interface."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Vraiment supprimer ce réseau sans-fil? effacement ne peut être annulé!\n"
-"Vous pourriez perdre l'accès à l'équipement si vous y êtes connecté par ce "
-"réseau."
-
-msgid "Really reset all changes?"
-msgstr "Vraiment ré-initialiser toutes les modifications ?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Vraiment arrêter cet interface « %s »?\n"
-"Vous pourriez perdre l'accès à l'équipement si vous y êtes connecté par "
-"cette interface."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Vraiment arrêter cet interface « %s » ?\n"
-"Vous pourriez perdre l'accès à l'équipement si vous y êtes connecté par "
-"cette interface."
-
-msgid "Really switch protocol?"
-msgstr "Vraiment changer de protocole ?"
-
-msgid "Realtime Connections"
-msgstr "Connexions temps-réel"
-
-msgid "Realtime Graphs"
-msgstr "Graphiques temps-réel"
-
-msgid "Realtime Load"
-msgstr "Charge temps-réel"
-
-msgid "Realtime Traffic"
-msgstr "Trafic temps-réel"
-
-msgid "Realtime Wireless"
-msgstr "Qualité de réception actuelle"
-
-msgid "Rebind protection"
-msgstr "Protection contre l'attaque « rebind »"
-
-msgid "Reboot"
-msgstr "Redémarrage"
-
-msgid "Rebooting..."
-msgstr "Redémarre…"
-
-msgid "Reboots the operating system of your device"
-msgstr "Redémarrage du système d'exploitation de votre équipement"
-
-msgid "Receive"
-msgstr "Reçoit"
-
-msgid "Receiver Antenna"
-msgstr "Antenne émettrice"
-
-msgid "Reconnect this interface"
-msgstr "Reconnecter cet interface"
-
-msgid "Reconnecting interface"
-msgstr "Reconnecte cet interface"
-
-msgid "References"
-msgstr "Références"
-
-msgid "Regulatory Domain"
-msgstr "Domaine de certification"
-
-msgid "Relay"
-msgstr "Relais"
-
-msgid "Relay Bridge"
-msgstr "Pont-relais"
-
-msgid "Relay between networks"
-msgstr "Relais entre réseaux"
-
-msgid "Relay bridge"
-msgstr "Pont-relais"
-
-msgid "Remote IPv4 address"
-msgstr "Adresse IPv4 distante"
-
-msgid "Remove"
-msgstr "Désinstaller"
-
-msgid "Repeat scan"
-msgstr "Répéter la recherche"
-
-msgid "Replace entry"
-msgstr "Remplacer l'entrée"
-
-msgid "Replace wireless configuration"
-msgstr "Remplacer la configuration sans-fil"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Nécessaire avec certains FAIs, par ex. : Charter avec DOCSIS 3"
-
-msgid "Reset"
-msgstr "Remise à zéro"
-
-msgid "Reset Counters"
-msgstr "Remise à zéro des compteurs"
-
-msgid "Reset to defaults"
-msgstr "Ré-initialisation"
-
-msgid "Resolv and Hosts Files"
-msgstr "Fichiers Resolv et Hosts"
-
-msgid "Resolve file"
-msgstr "Fichier de résolution des noms"
-
-msgid "Restart"
-msgstr "Redémarrer"
-
-msgid "Restart Firewall"
-msgstr "Redémarrer le pare-feu"
-
-msgid "Restore backup"
-msgstr "Restaurer une sauvegarde"
-
-msgid "Reveal/hide password"
-msgstr "Montrer/cacher le mot de passe"
-
-msgid "Revert"
-msgstr "Revenir"
-
-msgid "Root"
-msgstr "Racine"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Répertoire racine des fichiers fournis par TFTP"
-
-msgid "Router Model"
-msgstr "Modèle de routeur"
-
-msgid "Router Name"
-msgstr "Nom du routeur"
-
-msgid "Router Password"
-msgstr "Mot de passe du routeur"
-
-msgid "Routes"
-msgstr "Routes"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Avec les routes statiques vous pouvez spécifier à travers quelle interface "
-"ou passerelle un réseau peut être contacté."
-
-msgid "Rule #"
-msgstr "N° de règle"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-"Faire un vérification du système de fichiers avant de monter le périphérique"
-
-msgid "Run filesystem check"
-msgstr "Faire une vérification du système de fichiers"
-
-msgid "SSH Access"
-msgstr "Accès SSH"
-
-msgid "SSH-Keys"
-msgstr "Clés SSH"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Sauvegarder"
-
-msgid "Save & Apply"
-msgstr "Sauvegarder et Appliquer"
-
-msgid "Save &#38; Apply"
-msgstr "Sauvegarder et appliquer"
-
-msgid "Scan"
-msgstr "Scan"
-
-msgid "Scheduled Tasks"
-msgstr "Tâches Régulières"
-
-msgid "Section added"
-msgstr "Section ajoutée"
-
-msgid "Section removed"
-msgstr "Section retirée"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Voir le manuel de « mount » pour les détails"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"Envoyer des demandes d'échos LCP à intervalles donnés, en secondes ; utile "
-"uniqument associé à un seuil d'erreurs"
-
-msgid "Send router solicitations"
-msgstr "Envoyer des sollicitations au routeur"
-
-msgid "Separate Clients"
-msgstr "Isoler les clients"
-
-msgid "Separate WDS"
-msgstr "WDS séparé"
-
-msgid "Server Settings"
-msgstr "Paramètres du serveur"
-
-msgid "Service Name"
-msgstr "Nom du service"
-
-msgid "Service Type"
-msgstr "Type du service"
-
-msgid "Services"
-msgstr "Services"
-
-msgid "Setup DHCP Server"
-msgstr "Configurer le serveur DHCP"
-
-msgid "Setup Time Synchronization"
-msgstr "Configurer la synchronisation de l'heure"
-
-msgid "Show current backup file list"
-msgstr "Afficher la liste des fichiers de la sauvegarde actuelle"
-
-msgid "Shutdown this interface"
-msgstr "Arrêter cet interface"
-
-msgid "Shutdown this network"
-msgstr "Arrêter ce réseau"
-
-msgid "Signal"
-msgstr "Signal"
-
-msgid "Signal:"
-msgstr "Signal :"
-
-msgid "Size"
-msgstr "Taille"
-
-msgid "Skip"
-msgstr "Passer au suivant"
-
-msgid "Skip to content"
-msgstr "Skip to content"
-
-msgid "Skip to navigation"
-msgstr "Skip to navigation"
-
-msgid "Slot time"
-msgstr "Tranche de temps"
-
-msgid "Software"
-msgstr "Logiciels"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Certains champs sont invalides, ne peut sauvegarder les valeurs !"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Désolé, l'objet que vous avez demandé n'as pas été trouvé."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Désolé, le serveur à rencontré une erreur inattendue."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"Désolé, il n'y a pas de gestion de mise à jour disponible, une nouvelle "
-"image du micrologiciel doit être écrite manuellement. Reportez-vous S.V.P. "
-"au wiki OpenWrt pour connaître les instructions d'installation spécifiques à "
-"votre matériel."
-
-msgid "Sort"
-msgstr "Trier"
-
-msgid "Source"
-msgstr "Source"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "Indique la durée de préférence du préfixe publiée, en secondes"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Indique la durée de validité du préfixe publiée, en secondes"
-
-msgid "Specifies the button state to handle"
-msgstr "Indique l'état du bouton à gérer"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Indique le répertoire auquel le périphérique est rattaché"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Indique le port d'écoute de cette instance <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Indique le nombre de requêtes ARP ratées au delà duquel les hôtes seront "
-"supposés disparus"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr "Indique le délai après quoi les hôtes seront supposés disparus"
-
-msgid "Specify the secret encryption key here."
-msgstr "Spécifiez ici la clé secrète de chiffrage."
-
-msgid "Start"
-msgstr "Démarrer"
-
-msgid "Start priority"
-msgstr "Priorité de démarrage"
-
-msgid "Startup"
-msgstr "Démarrage"
-
-msgid "Static IPv4 Routes"
-msgstr "Routes IPv4 statiques"
-
-msgid "Static IPv6 Routes"
-msgstr "Routes IPv6 statiques"
-
-msgid "Static Leases"
-msgstr "Baux Statiques"
-
-msgid "Static Routes"
-msgstr "Routes statiques"
-
-msgid "Static WDS"
-msgstr "WDS statique"
-
-msgid "Static address"
-msgstr "Adresse statique"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Les baux statiques sont utilisés pour donner des adresses IP fixes et des "
-"noms symboliques à des clients DHCP. Il sont également nécessaires pour les "
-"interfaces sans configuration dynamique où l'on fournit un bail aux seuls "
-"hôtes configurés."
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Stop"
-msgstr "Arrêter"
-
-msgid "Strict order"
-msgstr "Ordre stricte"
-
-msgid "Submit"
-msgstr "Soumettre"
-
-msgid "Swap Entry"
-msgstr "Élement de partition d'échange"
-
-msgid "Switch"
-msgstr "Commutateur"
-
-msgid "Switch %q"
-msgstr "Commutateur %q"
-
-msgid "Switch %q (%s)"
-msgstr "Commutateur %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Protocole du commutateur"
-
-msgid "Sync with browser"
-msgstr "Synchro avec le navigateur"
-
-msgid "Synchronizing..."
-msgstr "Synchronisation…"
-
-msgid "System"
-msgstr "Système"
-
-msgid "System Log"
-msgstr "Journal système"
-
-msgid "System Properties"
-msgstr "Propriétés système"
-
-msgid "System log buffer size"
-msgstr "Taille du tampon du journal système"
-
-msgid "TCP:"
-msgstr "TCP :"
-
-msgid "TFTP Settings"
-msgstr "Paramètres TFTP"
-
-msgid "TFTP server root"
-msgstr "Racine du serveur TFTP"
-
-msgid "TX"
-msgstr "Transmis"
-
-msgid "TX Rate"
-msgstr "Débit en émission"
-
-msgid "Table"
-msgstr "Table"
-
-msgid "Target"
-msgstr "Cible"
-
-msgid "Terminate"
-msgstr "Terminer"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"La section <em>Configuration de l'équipement</em> couvre les paramètres "
-"physiques du matériel radio comme le canal, la puissance d'émission ou la "
-"sélection de l'antenne, qui sont partagés entre tous les réseaux sans-fil "
-"définis (si le matériel radio gère plusieurs réseaux SSID). Les paramètres "
-"dépendant de chaque réseau comme le chiffrage ou le mode de fonctionnement "
-"sont groupés dans <em>Configuration de l'interface</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Le paquet <em>libiwinfo-lua</em> n'est pas installé. Vous devez l'installer "
-"pour une configuration sans-fil fonctionnelle !"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"Le préfixe IPv6 attribué par le fournisseur, se termine généralement par "
-"<code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Les caractères autorisés sont : <code>A-Z</code>, <code>a-z</code>, "
-"<code>0-9</code> et <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr "Le périphérique de bloc contenant la partition (ex : /dev/sda1)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Le système de fichiers utilisé pour formatter le support de stockage (ex : "
-"ext3)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"L'image du micrologiciel a été chargée. Ci-dessous la taille et la somme de "
-"contrôle de cette image, comparez-les avec le fichier original pour vous "
-"assurer de son intégrité.<br /> Cliquez sur \"Continuer\" pour lancer la "
-"procédure d'écriture."
-
-msgid "The following changes have been committed"
-msgstr "Les changements suivants ont été appliqués"
-
-msgid "The following changes have been reverted"
-msgstr "Les changements suivants ont été annulés"
-
-msgid "The following rules are currently active on this system."
-msgstr "Les règles suivantes sont actuellement actives sur ce système."
-
-msgid "The given network name is not unique"
-msgstr "Le nom de réseau donné n'est pas unique"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"Le matériel ne sait pas gérer plusieurs SSID et la configuration existante "
-"sera remplacée si vous continuez."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-"La longueur du préfixe IPv4 en bits, le reste est utilisé dans les adresses "
-"IPv6"
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "La longueur du préfixe IPv6 en bits"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"Les ports de votre équipement peuvent être configurés pour combiner "
-"plusieurs <abbr title=\"Virtual Local Area Network\">VLANs</abbr> dans "
-"lesquels les machines connectées peuvent dialoguer directement l'une avec "
-"l'autre. Les <abbr title=\"Virtual Local Area Network\">VLAN</abbr>s sont "
-"souvent utilisés pour séparer différences sous-réseaux. Bien souvent il y a "
-"un port d'uplink pour une connexion vers un réseau plus vaste, comme "
-"internet et les autres ports sont réservés au réseau local."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "Le protocole sélectionné nécessite l'attribution d'un périphérique"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"Le système est en train d'effacer la partition de configuration et "
-"redémarrera tout seul une fois cela fini."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-
-msgid "There are no active leases."
-msgstr "Il n'y a aucun bail actif."
-
-msgid "There are no pending changes to apply!"
-msgstr "Il n'y a aucun changement en attente d'être appliqués !"
-
-msgid "There are no pending changes to revert!"
-msgstr "Il n'y a aucun changement à annuler !"
-
-msgid "There are no pending changes!"
-msgstr "Il n'y a aucun changement en attente !"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Il n'y a aucun périphérique attribué pour l'instant, liez s.v.p. un "
-"périphérique réseau dans l'onglet \"Paramètres du matériel\""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Ce routeur n'a pas de mot de passe configuré. Veuillez configurer un mot de "
-"passe pour l'utilisateur root pour protéger l'accès de votre interface web "
-"et activer l'accès par SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr "L'adresse IPv4 du relais"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Voici la liste des motifs de type glob shell utilisés pour sélectionner les "
-"fichiers et répertoires à inclure durant la mise à jour système. Les "
-"fichiers modifiés dans /etc/config/ et certains autres sont automatiquement "
-"conservés."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"Il s'agit de l'identifiant de 32 octets codés en hexa, pas du nom de "
-"connexion"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Voici le contenu de /etc/rc.local. Placez-y vos propres commandes (avant le "
-"« exit 0 ») pour qu'ils soient exécutés en fin de démarrage."
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"Il s'agit de l'adresse de l'extrémité locale attribuée par le fournisseur de "
-"tunnels, elle se termine habituellement avec <code>:2</code>"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr "C'est le seul serveur DHCP sur le réseau local"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Ceci est le système crontab avec lequel sont définies les tâches récurrentes."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-"Il s'agit habituellement de l'adresse du plus proche PoP géré par le "
-"fournisseur de tunnels"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Cette liste donne une vue d'ensemble des processus en exécution et leur "
-"statut."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "Cette page permet la configuration d'actions spécifiques des boutons"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Cette page donne une vue d'ensemble des connexions réseaux actuellement "
-"actives."
-
-msgid "This section contains no values yet"
-msgstr "Cette section ne contient pas encore de valeur"
-
-msgid "Time Synchronization"
-msgstr "Synchronisation de l'heure"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "La synchronisation de l'heure n'est pas encore configurée."
-
-msgid "Timezone"
-msgstr "Fuseau horaire"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Pour restaurer les fichiers de configuration, vous pouvez charger ici une "
-"archive de sauvegarde construite précédemment."
-
-msgid "Total Available"
-msgstr "Total disponible"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "Trafic"
-
-msgid "Transfer"
-msgstr "Transfert"
-
-msgid "Transmission Rate"
-msgstr "Débit d'émission"
-
-msgid "Transmit"
-msgstr "Transmet"
-
-msgid "Transmit Power"
-msgstr "Puissance d'émission"
-
-msgid "Transmitter Antenna"
-msgstr "Antenne émettrice"
-
-msgid "Trigger"
-msgstr "Déclenchement"
-
-msgid "Trigger Mode"
-msgstr "Mode de déclenchement"
-
-msgid "Tunnel ID"
-msgstr "ID du tunnel"
-
-msgid "Tunnel Interface"
-msgstr "Interface du tunnel"
-
-msgid "Turbo Mode"
-msgstr "Mode Turbo"
-
-msgid "Tx-Power"
-msgstr "Puissance d'émission"
-
-msgid "Type"
-msgstr "Type"
-
-msgid "UDP:"
-msgstr "UDP :"
-
-msgid "UMTS only"
-msgstr "seulement UMTS"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "Périphérique USB"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Impossible d'envoyer"
-
-msgid "Unknown"
-msgstr "Inconnu"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Erreur inconnue, mot de passe inchangé !"
-
-msgid "Unmanaged"
-msgstr "non-géré"
-
-msgid "Unsaved Changes"
-msgstr "Changements non appliqués"
-
-msgid "Unsupported protocol type."
-msgstr "Type de protocole non pris en charge."
-
-msgid "Update lists"
-msgstr "Mettre les listes à jour"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Envoyer ici une image compatible avec le système de mise à jour pour "
-"remplacer le micrologiciel actuel. Cochez \"Garder la configuration\" pour "
-"maintenir la configuration actuelle (nécessite une image de micrologiciel "
-"OpenWRT compatible)."
-
-msgid "Upload archive..."
-msgstr "Envoi de l'archive…"
-
-msgid "Uploaded File"
-msgstr "Fichier Uploadé"
-
-msgid "Uptime"
-msgstr "Uptime"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Utiliser /etc/ethers"
-
-msgid "Use DHCP gateway"
-msgstr "Utiliser la passerelle DHCP"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Utiliser les serveurs DNS publiés par le distant"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Utiliser les codes-pays ISO/IEC 3166 alpha2."
-
-msgid "Use MTU on tunnel interface"
-msgstr "Utiliser le MTU sur l'interface du tunnel"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Utiliser le TTL sur l'interface du tunnel"
-
-msgid "Use as root filesystem"
-msgstr "Utiliser comme racine du système de fichiers"
-
-msgid "Use broadcast flag"
-msgstr "Utiliser une marque de diffusion"
-
-msgid "Use custom DNS servers"
-msgstr "Utiliser des serveurs DNS spécifiques"
-
-msgid "Use default gateway"
-msgstr "Utiliser la passerelle par défaut"
-
-msgid "Use gateway metric"
-msgstr "Utiliser la métrique de la passerelle"
-
-msgid "Use preferred lifetime"
-msgstr "Utiliser la durée de préférence"
-
-msgid "Use routing table"
-msgstr "Utiliser la table de routage"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Utiliser le bouton <em>Ajouter</em> pour créer un nouveau bail. "
-"L'<em>adresse MAC</em> identifie l'hôte, l'<em>adresse IPv4</em> décrit "
-"l'adresse fixe à utiliser et le <em>nom d'hôte</em> sera le nom symbolique "
-"attribué à l'hôte qui fait la demande."
-
-msgid "Use valid lifetime"
-msgstr "Utiliser la durée de validité"
-
-msgid "Used"
-msgstr "Utilisé"
-
-msgid "Used Key Slot"
-msgstr "Clé utilisée"
-
-msgid "Username"
-msgstr "Nom d'utilisateur"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Interface du VLAN"
-
-msgid "VLANs on %q"
-msgstr "VLANs sur %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLANs sur %q (%s)"
-
-msgid "VPN Server"
-msgstr "Serveur VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "Classe de fournisseur à envoyer dans les requêtes DHCP"
-
-msgid "Verify"
-msgstr "Vérifier"
-
-msgid "Version"
-msgstr "Version"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "Système ouvert WEP"
-
-msgid "WEP Shared Key"
-msgstr "Clé partagée WEP"
-
-msgid "WEP passphrase"
-msgstr "Mot de passe WEP"
-
-msgid "WMM Mode"
-msgstr "Mode WMM"
-
-msgid "WPA passphrase"
-msgstr "Mot de passe WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"Le chiffrage WPA nécessite l'installation du paquet wpa_supplicant (en mode "
-"client) ou hostapd (en mode Point d'accès ou Ad-hoc)."
-
-msgid "Waiting for changes to be applied..."
-msgstr "En attente de l'application des changements..."
-
-msgid "Waiting for command to complete..."
-msgstr "En attente de la fin de la commande..."
-
-msgid "Warning"
-msgstr "Attention"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Attention : il reste des changements non appliqués qui seront perdus après "
-"redémarrage !"
-
-msgid "Wifi"
-msgstr "Wi-Fi"
-
-msgid "Wireless"
-msgstr "Sans-fil"
-
-msgid "Wireless Adapter"
-msgstr "Module Wi-Fi"
-
-msgid "Wireless Network"
-msgstr "Réseau sans-fil"
-
-msgid "Wireless Overview"
-msgstr "Présentation des réseaux sans-fil"
-
-msgid "Wireless Security"
-msgstr "Sécurité des réseaux sans-fil"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Le Wi-Fi est désactivé ou non associé"
-
-msgid "Wireless is restarting..."
-msgstr "Le Wi-Fi est ré-initialisé…"
-
-msgid "Wireless network is disabled"
-msgstr "Le réseau Wi-Fi est désactivé"
-
-msgid "Wireless network is enabled"
-msgstr "Le réseau Wi-Fi est activé"
-
-msgid "Wireless restarted"
-msgstr "Wi-Fi ré-initialisé"
-
-msgid "Wireless shut down"
-msgstr "Wi-Fi arrêté"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Écrire les requêtes DNS reçues dans syslog"
-
-msgid "XR Support"
-msgstr "Gestion du mode XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Vous pouvez ici activer ou désactiver les scripts d'initialisation "
-"installés. Les changements seront pris en compte après un redémarrage.<br/"
-"><strong>Attention: Si vous désactivez des scripts essentiels comme \"réseau"
-"\", votre équipement pourrait ne plus être accessible&#160;!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Vous devez activer Java Script dans votre navigateur pour que LuCI "
-"fonctionne correctement."
-
-msgid "any"
-msgstr "n'importe lequel"
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "ponté"
-
-msgid "create:"
-msgstr "créer:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "créer un bridge entre plusieurs interfaces"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "désactiver"
-
-msgid "expired"
-msgstr "expiré"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr "fichier dans lequel les baux DHCP seront stockés"
-
-msgid "forward"
-msgstr "transfert"
-
-msgid "full-duplex"
-msgstr "full-duplex"
-
-msgid "half-duplex"
-msgstr "half-duplex"
-
-msgid "help"
-msgstr "aide"
-
-msgid "hidden"
-msgstr "cacher"
-
-msgid "if target is a network"
-msgstr "si la destination est un réseau"
-
-msgid "input"
-msgstr "entrée"
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "fichier de résolution local"
-
-msgid "no"
-msgstr "non"
-
-msgid "no link"
-msgstr "pas de lien"
-
-msgid "none"
-msgstr "aucun"
-
-msgid "off"
-msgstr "Arrêté"
-
-msgid "on"
-msgstr "Actif"
-
-msgid "open"
-msgstr "ouvrir"
-
-msgid "routed"
-msgstr "routé"
-
-msgid "tagged"
-msgstr "marqué"
-
-msgid "unknown"
-msgstr "inconnu"
-
-msgid "unlimited"
-msgstr "non limité"
-
-msgid "unspecified"
-msgstr "non précisé"
-
-msgid "unspecified -or- create:"
-msgstr "non précisé -ou- créer :"
-
-msgid "untagged"
-msgstr "non marqué"
-
-msgid "yes"
-msgstr "oui"
-
-msgid "« Back"
-msgstr "« Retour"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Attente du routeur…"
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Activer le serveur NTP intégré"
-
-#~ msgid "Active Leases"
-#~ msgstr "Baux actifs"
-
-#~ msgid "Open"
-#~ msgstr "Ouvert"
-
-#~ msgid "KB"
-#~ msgstr "Ko"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Débit"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Configuration / Appliquer"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Configuration / Changements"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Configuration / Annuler les changements"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "Adresse MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "Chiffré"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "Recherche <abbr title=\"Wireless Local Area Network\">WLAN</abbr>"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Choisissez le réseau auquel vous voulez affecter cette interface sans-"
-#~ "fil. Sélectionnez <em>non précisé</em> pour ne pas l'affecter à un réseau "
-#~ "ou remplissez le champ <em>créer</em> pour définir un nouveau réseau."
-
-#~ msgid "Create Network"
-#~ msgstr "Créer un réseau"
-
-#~ msgid "Link"
-#~ msgstr "Lien"
-
-#~ msgid "Networks"
-#~ msgstr "Réseaux"
-
-#~ msgid "Power"
-#~ msgstr "Puissance"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Réseaux Wi-Fi dans votre environnement"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "Adresse/préfixe en notation <abbr title=\"Classless Inter-Domain Routing"
-#~ "\">CIDR</abbr>"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "Serveur <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "Diffusion <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Adresse <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "Alias IP"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Configuration IPv6"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Note : si vous choisissez ici une interface faisant partie d'un autre "
-#~ "réseau, il sera déplacé dans ce réseau."
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Vraiment supprimer cet interface ? L'effacement ne peut être annulé !"
-#~ "\\nVous pourriez perdre l'accès à ce routeur si vous y êtes connecté par "
-#~ "cette interface."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Vraiment supprimer ce réseau sans-fil ? effacement ne peut être annulé !"
-#~ "\\nVous pourriez perdre l'accès à ce routeur si vous y êtes connecté par "
-#~ "ce réseau."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Vraiment arrêter cet interface « %s » ?\\nVous pourriez perdre l'accès à "
-#~ "ce routeur si vous y êtes connecté par cette interface."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Vraiment arrêter ce réseau ?\\nVous pourriez perdre l'accès à ce routeur "
-#~ "si vous y êtes connecté par ce réseau."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Les ports de votre routeur peuvent être configurés pour combiner "
-#~ "plusieurs VLANs dans lesquels les machines connectées peuvent dialoguer "
-#~ "directement l'une avec l'autre. Les VLANs sont souvent utilisés pour "
-#~ "séparer différences sous-réseaux. Bien souvent il y a un port d'uplink "
-#~ "pour une connexion vers un réseau plus vaste, comme internet et les "
-#~ "autres ports sont réservés au réseau local."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Activer l'utilisation de tampons"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6 par dessus IPv4"
-
-#~ msgid "Custom Files"
-#~ msgstr "Fichiers spécifiques"
-
-#~ msgid "Custom files"
-#~ msgstr "Fichiers spécifiques"
-
-#~ msgid "Detected Files"
-#~ msgstr "Fichiers détectés"
-
-#~ msgid "Detected files"
-#~ msgstr "Fichiers détectés"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Fichiers à conserver lors d'une mise à jour du micrologiciel"
-
-#~ msgid "General"
-#~ msgstr "Général"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Ici, vous pouvez personnaliser les réglages et les fonctionnalités de "
-#~ "LuCI."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Actions post-changements"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr ""
-#~ "Les fichiers suivants ont été détectés par le système et seront "
-#~ "automatiquement préservés pendant la mise à jour"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Ces commandes seront executées automatiquement lorsqu'une configuration "
-#~ "UCI est appliquée, les changement prenant effet immédiatement."
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr ""
-#~ "Voici une liste de motifs de sélection shell pour sélectionner les "
-#~ "fichiers et répertoires à inclure durant une mise à jour"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "IU Web"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "Serveur <abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "Paramètres AHCP"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "Essais de ping ARP"
-
-#~ msgid "ATM Settings"
-#~ msgstr "Paramètres ATM"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "Accepter les publications du routeur"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Point d'accès (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Options pppd supplémentaires"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "Plage autorisée de 1 à FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Déconnexion automatique"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Archive à restaurer"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configurer le serveur DNS local pour utiliser le serveur de nom fourni "
-#~ "par le pair PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Script de Connexion"
-
-#~ msgid "Create backup"
-#~ msgstr "Créer une archive de sauvegarde"
-
-#~ msgid "Default"
-#~ msgstr "Défaut"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Script de Déconnexion"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Editer la liste des paquets et le répertoire de destination"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "Activer les VLANs 4K"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Activer l'IPv6 sur le lien PPP"
-
-#~ msgid "Firmware image"
-#~ msgstr "Firmware image"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "Transmission du DHCP"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "Transmission des diffusions"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "Identifiant du tunnel HE.net"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Ici, vous pouvez sauvegarder et restaurer la configuration de votre "
-#~ "routeur et, si possible, restaurer la configuration par défaut du routeur."
-
-#~ msgid "Installation targets"
-#~ msgstr "Répertoires de destination"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Keep configuration files"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Maintenir la connexion"
-
-#~ msgid "Kernel"
-#~ msgstr "Noyau"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Laisser pppd remplacer la route par défaut courante pour utiliser "
-#~ "l'interface PPP après l'établissement de la connexion"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "pppd exécutera ce script après l'établissement du lien PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "pppd exécutera ce script avant de déconnecter le lien PPP"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Assurez-vous de fournir le bon code PIN ou vous pourriez bloquer votre "
-#~ "carte SIM !"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "La plupart d'entre eux sont des serveurs réseaux, qui vous offrent "
-#~ "certains services comme un accès shell, accéder à des pages comme LuCI, "
-#~ "faire du routage mesh, envoyer des e-mails ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "Reconnexion si la connexion est perdue"
-
-#~ msgid "Override Gateway"
-#~ msgstr "Remplacer la passerelle"
-
-#~ msgid "PIN code"
-#~ msgstr "code PIN"
-
-#~ msgid "PPP Settings"
-#~ msgstr "Paramètres PPP"
-
-#~ msgid "Package lists"
-#~ msgstr "Listes de paquets"
-
-#~ msgid ""
-#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
-#~ "VLAN ID added to received untagged frames."
-#~ msgstr ""
-#~ "Le numéro de port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> indique "
-#~ "l'identifiant VLAN attribué aux trames non marquées"
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "Port PVIDs sur %q"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr ""
-#~ "Etes-vous sûr de vouloir revenir à la configuration par défaut du "
-#~ "firmware ?"
-
-#~ msgid "Processor"
-#~ msgstr "Processeur"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Port Radius"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Serveur Radius"
-
-#~ msgid "Relay Settings"
-#~ msgstr "Paramètres du relais"
-
-#~ msgid "Replace default route"
-#~ msgstr "Remplacer la route par défaut"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Revenir à la configuration par défaut du routeur"
-
-#~ msgid "Routing table ID"
-#~ msgstr "ID de la table de routage"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Secondes à attendre pour que le modem soit prêt avant d'essayer de se "
-#~ "connecter"
-
-#~ msgid "Send Router Solicitiations"
-#~ msgstr "Envoyer des sollicitations de routeur"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "Adresse IPv4 du serveur"
-
-#~ msgid "Service type"
-#~ msgstr "Type de service"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr ""
-#~ "Les services et démons accomplissent certaines tâches sur votre "
-#~ "équipement."
-
-#~ msgid "Settings"
-#~ msgstr "Réglages"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Délai d'initialisation"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr ""
-#~ "Spécifiez ici des arguments de ligne de commande supplémentaire pour pppd"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "Le noeud d'interface de votre modem, e.g. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "Délai d'inactivité à partir duquel la connexion est coupée"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "Serveur de temps (rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "Configurion du tunnel"
-
-#~ msgid "Update package lists"
-#~ msgstr "Mettre à jour la liste des paquets"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Upload an OpenWrt image file to reflash the device."
-
-#~ msgid "Upload image"
-#~ msgstr "Upload image"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Utiliser le DNS fourni"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr ""
-#~ "Vous pouvez indiquer plusieurs serveurs DNS ici, tapez Entrée pour "
-#~ "ajouter un nouvel élément. Les serveurs ajoutés ici remplaceront ceux "
-#~ "attribués automatiquement."
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Vous avez besoin d'installer \"comgt\" pour le support UMTS/GPRS, \"ppp-"
-#~ "mod-pppoe\" pour le PPPoE, \"ppp-mod-pppoa\" pour le PPPoA ou \"pptp\" "
-#~ "pour le PPtP"
-
-#~ msgid "back"
-#~ msgstr "retour"
-
-#~ msgid "buffered"
-#~ msgstr "bufferisé"
-
-#~ msgid "cached"
-#~ msgstr "mis en cache"
-
-#~ msgid "free"
-#~ msgstr "libre"
-
-#~ msgid "static"
-#~ msgstr "statique"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> est une suite "
-#~ "logicielle d'applications Lua incluant un <abbr title=\"Model-View-"
-#~ "Controller\">MVC</abbr>-Webframework et une interface web pour "
-#~ "équipements embarqués. <abbr title=\"Lua Configuration Interface\">LuCI</"
-#~ "abbr> est sous license Apache."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "Clés <abbr title=\"Secure Shell\">SSH</abbr>"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr "Un serveur web HTTP/1.1 léger écrit en C et en Lua, créé pour LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr "Un serveur web léger qui peut être utilisé pour LuCI."
-
-#~ msgid "About"
-#~ msgstr "A propos"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "Connexions IP actives"
-
-#~ msgid "Addresses"
-#~ msgstr "Adresses"
-
-#~ msgid "Admin Password"
-#~ msgstr "Mot de passe administrateur"
-
-#~ msgid "Alias"
-#~ msgstr "Alias"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Domaine d'authentification"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Port du pont"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "Changer le mot de passe du système (Utilisateur \"root\")"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Client + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Fichier de configuration"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Délai de connexion"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Contributeurs"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP désigné"
-
-#~ msgid "Document root"
-#~ msgstr "Page racine"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Activer le maintien (Keep-Alive)"
-
-#~ msgid "Enable device"
-#~ msgstr "Activer ce périphérique"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Pont Ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Vous pouvez copier ici des clés SSH publiques (une par ligne) pour une "
-#~ "authentification SSH sur clés publiques."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Configuration IP"
-
-#~ msgid "Interface Status"
-#~ msgstr "État de l'interface"
-
-#~ msgid "Lead Development"
-#~ msgstr "Développeurs principaux"
-
-#~ msgid "Master"
-#~ msgstr "Point d'accès"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Point d'accès + WDS"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "Cette interface n'a Aucune adresse configurée."
-
-#~ msgid "Not configured"
-#~ msgstr "Pas configuré"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Mot de passe changé avec succès"
-
-#~ msgid "Plugin path"
-#~ msgstr "Chemin du greffon"
-
-#~ msgid "Ports"
-#~ msgstr "Ports"
-
-#~ msgid "Primary"
-#~ msgstr "Primaire"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Page d'accueil du projet"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "<abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-#~ msgid "Thanks To"
-#~ msgstr "Merci à"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr "Le domaine qui sera affiché lors de la fenêtre d'authentification."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Erreur inconnue"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "fichier de configuration par défaut : /etc/httpd.conf"
-
-#~ msgid "Enable this switch"
-#~ msgstr "Activer ce switch"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "Code d'erreur OPKG %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Liste des paquets mise à jour"
-
-#~ msgid "Reset switch during setup"
-#~ msgstr "Ré-initialiser le switch pendant la configuration"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Mettre à jour les paquets installés"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Les journaux des services ou du noyau peuvent être vus ici afin d'obtenir "
-#~ "un aperçu de leur état."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Ici, vous trouverez des informations sur l'état actuel du système comme "
-#~ "la fréquence processeur, utilisation mémoire et trafic réseau."
-
-#~ msgid "Search file..."
-#~ msgstr "Chercher un fichier..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> est une interface "
-#~ "graphique libre, flexible, et orientée utilisateur pour configurer "
-#~ "OpenWrt Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "Et maintenant que la fête commence !"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Nous souhaitons améliorer l'interface de manière permanente, vos retours "
-#~ "et suggestions sont primordiaux."
-
-#~ msgid "Hello!"
-#~ msgstr "Bonjour !"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Vous trouverez une page de navigation sur le côté gauche permettant "
-#~ "d'accèder aux différentes pages de configuration."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "Dans les pages suivantes vous pouvez ajuster tous les réglages importants "
-#~ "de votre routeur."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "L'équipe LuCI"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr "Voici la page d'administration de LuCI."
-
-#~ msgid "User Interface"
-#~ msgstr "Interface utilisateur"
-
-#~ msgid "enable"
-#~ msgstr "activer"
-
-#~ msgid "(hidden)"
-#~ msgstr "(caché)"
-
-#~ msgid "(optional)"
-#~ msgstr "(optionnel)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "Port <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "Les serveurs <abbr title=\"Domain Name System\">DNS</abbr> du fichier de "
-#~ "résolution seront interrogés dans l'ordre"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "Nombre <abbr title=\"maximal\">max.</abbr> d'attributions <abbr title="
-#~ "\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr "taille maximum du paquet. EDNS.0 "
-
-#~ msgid "AP-Isolation"
-#~ msgstr "Isolation AP"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Ajouter ce réseau Wi-Fi au réseau physique"
-
-#~ msgid "Aliases"
-#~ msgstr "Alias"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Créer un réseau"
-
-#~ msgid "Devices"
-#~ msgstr "Equipements"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr ""
-#~ "Ne pas transmettre les requêtes de recherche inverse pour les réseaux "
-#~ "locaux"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Activer le serveur TFTP"
-
-#~ msgid "Errors"
-#~ msgstr "Erreurs"
-
-#~ msgid "Essentials"
-#~ msgstr "Essentiel"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Etendre le nom d'hôte"
-
-#~ msgid "First leased address"
-#~ msgstr "Première adresse attribuée"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Addresse matériel"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Ici vous pouvez configurer les équipements Wi-Fi installés."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignorer /etc/hosts"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Ad-Hoc"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Connexion Internet"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Client"
-
-#~ msgid "Leases"
-#~ msgstr "Baux"
-
-#~ msgid "Local Domain"
-#~ msgstr "Domaine local"
-
-#~ msgid "Local Network"
-#~ msgstr "Réseau Local"
-
-#~ msgid "Local Server"
-#~ msgstr "Serveur local"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Image de démarrage réseau"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr "Nom du réseau (ESSID)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Nombre d'adresses attribuées"
-
-#~ msgid "Path"
-#~ msgstr "Chemin"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Accomplir les actions"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Empêche la communication directe Client à Client"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Point d'accès"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Fichier de résolution"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Racine du serveur TFTP"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Les changements suivants ont été appliqués"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Lors d'une nouvelle installation, ces fichiers seront ajoutés à la "
-#~ "nouvelle installation."
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Avec DHCP, les machines connectées au réseau peuvent recevoir leurs "
-#~ "réglages réseau directement (adresse IP, masque de réseau, serveur "
-#~ "DNS, ...)"
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Vous pouvez faire fonctionner plusieurs réseaux Wi-Fi sur un seul "
-#~ "équipement. Il existe des limitations matérielles et liées au pilote. En "
-#~ "général vous pouvez faire fonctionner simultanément 1 réseau Ad-Hoc et 3 "
-#~ "points d'accès simultanément."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Vous avez besoin d'installer \"ppp-mod-pppoe\" pour le support PPPoE ou "
-#~ "\"pptp\" pour le PPtP"
-
-#~ msgid "Zone"
-#~ msgstr "Zone"
-
-#~ msgid "additional hostfile"
-#~ msgstr "fichiers de noms d'hôtes supplémentaires"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "concatène le nom de domaine aux noms d'hôtes"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "statique"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "reconnecter automatiquement"
-
-#~ msgid "concurrent queries"
-#~ msgstr "Requêtes concurrentes maximum"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr "désactiver DHCP sur cette interface"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "déconnecter après une inactivité de"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "Ne pas mettre en cache les requêtes négatives"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr "filtre les requêtes inutiles émises par les systèmes Windows"
-
-#~ msgid "installed"
-#~ msgstr "installé"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "localiser la réponse suivant l'émetteur de la requête"
-
-#~ msgid "not installed"
-#~ msgstr "pas installé"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr "empêche la mise en cache de requêtes DNS erronnées"
-
-#~ msgid "query port"
-#~ msgstr "port de requête"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmis / reçu"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "réseaux compris"
-
-#~ msgid "all"
-#~ msgstr "tous"
-
-#~ msgid "Code"
-#~ msgstr "Code"
-
-#~ msgid "Distance"
-#~ msgstr "Distance"
-
-#~ msgid "Legend"
-#~ msgstr "Légende"
-
-#~ msgid "Library"
-#~ msgstr "Bibliothèque"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "voir la page de man de '%s'"
-
-#~ msgid "Package Manager"
-#~ msgstr "Gestionnaire de paquets"
-
-#~ msgid "Service"
-#~ msgstr "Service"
-
-#~ msgid "Statistics"
-#~ msgstr "Statistiques"
-
-#~ msgid "zone"
-#~ msgstr "Zone"
diff --git a/po/fr/commands.po b/po/fr/commands.po
deleted file mode 100644
index 554e19c..0000000
--- a/po/fr/commands.po
+++ /dev/null
@@ -1,98 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-26 00:08+0200\n"
-"Last-Translator: val56 <valentin_sonet@hotmail.fr>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr "Une courte description de la commande configurée"
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-#, fuzzy
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-"Autoriser l'utilisateur à fournir des arguments de commandes supplémentaires"
-
-msgid "Arguments:"
-msgstr "Arguments :"
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr "Code : "
-
-msgid "Collecting data..."
-msgstr "Récupération des données ..."
-
-msgid "Command"
-msgstr "Commande"
-
-msgid "Command failed"
-msgstr "Echec de la commande"
-
-msgid "Command line to execute"
-msgstr "Ligne de commande à exécuter"
-
-msgid "Command successful"
-msgstr "Commande réussie"
-
-msgid "Command:"
-msgstr "Commande :"
-
-msgid "Configure"
-msgstr "Configurer"
-
-msgid "Custom Commands"
-msgstr "Commandes personnalisées"
-
-msgid "Custom arguments"
-msgstr "Arguments personnalisés"
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr "Description"
-
-msgid "Download"
-msgstr "Télécharger"
-
-msgid "Failed to execute command!"
-msgstr "Echec de l'exécution de la commande ! "
-
-msgid "Link"
-msgstr "Lien"
-
-msgid "Loading"
-msgstr "Chargement"
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr "Exécuter"
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-"Cette page vous permet de configurer des commandes shell personnalisées, "
-"pouvant être invoquées facilement depuis l'interface web."
-
-msgid "Waiting for command to complete..."
-msgstr "En attente de la commande pour finir..."
diff --git a/po/fr/coovachilli.po b/po/fr/coovachilli.po
deleted file mode 100644
index b95bb44..0000000
--- a/po/fr/coovachilli.po
+++ /dev/null
@@ -1,26 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-11-06 13:16+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Configuration Réseau"
-
-msgid "RADIUS configuration"
-msgstr "Configuration RADIUS"
-
-msgid "UAM and MAC Authentication"
-msgstr "Authentification UAM et MAC"
diff --git a/po/fr/ddns.po b/po/fr/ddns.po
deleted file mode 100644
index 189e8fa..0000000
--- a/po/fr/ddns.po
+++ /dev/null
@@ -1,89 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-11-06 13:19+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "Vérifier si l'adresse IP a changé toutes les"
-
-msgid "Check-time unit"
-msgstr "Unité de temps pour la vérification"
-
-msgid "Custom update-URL"
-msgstr "URL de mise à jour personnalisée"
-
-msgid "Dynamic DNS"
-msgstr "DNS Dynamique"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Le DNS Dynamique permet au routeur d'être joint avec un nom d'hôte fixe bien "
-"que changeant dynamiquement d'adresse IP."
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "Event interface"
-msgstr "Événement sur l'interface"
-
-msgid "Force update every"
-msgstr "Vérification forcée toutes les"
-
-msgid "Force-time unit"
-msgstr "Unité de temps pour la vérification forcée"
-
-msgid "Hostname"
-msgstr "Nom d'hôte"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Network"
-msgstr "Réseau"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "Sur quelle interface devrait démarrer le processus du script ddns."
-
-msgid "Password"
-msgstr "Mot de passe"
-
-msgid "Service"
-msgstr "Service"
-
-msgid "Source of IP address"
-msgstr "Source de l'adresse IP"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Nom d'utilisateur"
-
-msgid "custom"
-msgstr "personnalisé"
-
-# Hours
-msgid "h"
-msgstr "h"
-
-msgid "interface"
-msgstr "interface"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
-
-msgid "network"
-msgstr "réseau"
diff --git a/po/fr/diag_core.po b/po/fr/diag_core.po
deleted file mode 100644
index a5b4e6a..0000000
--- a/po/fr/diag_core.po
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-06 13:21+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr "Configuration des diagnostics"
-
-msgid "Diagnostics"
-msgstr "Diagnostiques"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Les diagnostics disponible ci-dessous dépendent des modules que vous avez "
-"installé sur votre appareil. "
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Les items de ce menu vous permettent d'accomplir des diagnostics sur votre "
-"système pour vous aider à le dépanner."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Ce menu vous permet de configurer des diagnostics réseau, comme des "
-"recherches de périphérique réseau et des tests par ping."
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d_diag"
diff --git a/po/fr/diag_devinfo.po b/po/fr/diag_devinfo.po
deleted file mode 100644
index 940cbf1..0000000
--- a/po/fr/diag_devinfo.po
+++ /dev/null
@@ -1,220 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-26 00:14+0200\n"
-"Last-Translator: val56 <valentin_sonet@hotmail.fr>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Actions"
-msgstr "Actions"
-
-msgid "Add"
-msgstr "Ajouter"
-
-msgid "Beginning of MAC address range"
-msgstr "Début de la plage d'adresses MAC"
-
-msgid "Config Phone Scan"
-msgstr "Configurer la recherche de téléphone"
-
-msgid "Configure"
-msgstr "Configurer"
-
-msgid "Configure Scans"
-msgstr "Configurer la recherche"
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-"Configurer la recherche d'appareils sur un réseau spécifié. Réduire le "
-"'Timeout', 'Repeat Count', et/ou  'Sleep Between Requests' peut augmenter la "
-"vitesse des scans, mais peut aussi ne pas trouver certains appareils."
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-"Configurer la recherche d'appareils SIP supporté sur un réseau spécifié. "
-"Réduire le 'Timeout', 'Repeat Count', et/ou 'Sleep Between Requests' peut "
-"augmenter la vitesse des scans, mais peut aussi ne pas trouver certains "
-"appareils."
-
-msgid "Delete"
-msgstr "Supprimer"
-
-msgid "Device Scan Config"
-msgstr "Configuration de la recherche de périphériques"
-
-msgid "Device Type"
-msgstr "Type d'appareil"
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr "Périphériques sur le réseau"
-
-msgid "Edit"
-msgstr "Éditer"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "End of MAC address range"
-msgstr "Fin de la plage d'adresses MAC"
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr "Adresse IP"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Invalid"
-msgstr "Invalide"
-
-msgid "Link to Device"
-msgstr "Lien vers le périphérique"
-
-msgid "MAC Address"
-msgstr "Adresse MAC"
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr "Modification de MAC de périphériques"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"Gamme d'adresses MAC et informations utilisées pour modifier les bases "
-"système et IEEE"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Durée d'attente en millisecondes entre les requêtes (par défaut 100)"
-
-msgid "Model"
-msgstr "Modèle"
-
-msgid "Name"
-msgstr "Nom"
-
-msgid "Network Device Scan"
-msgstr "Analyse des périphériques réseau"
-
-msgid "Network Device Scanning Configuration"
-msgstr "Configuration de l'analyse des périphériques réseau"
-
-msgid "Networks to scan for devices"
-msgstr "Réseaux à scanner pour les périphériques "
-
-msgid "Networks to scan for supported devices"
-msgstr "Réseaux à scanner pour les périphériques supporté"
-
-msgid "No SIP devices"
-msgstr "Pas de périphérique SIP"
-
-msgid "No devices detected"
-msgstr "Pas de périphérique détecté"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Nombre de tentatives d'envois des requêtes (1 par défaut)"
-
-msgid "OUI Owner"
-msgstr "OUI du fabricant"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Modifie les informations renvoyées par le script d'information « MAC vers "
-"Périphérique » (mac-to-devinfo) pour une gamme donnée d'adresses MAC"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr "Faire un scan ( Cela peut prendre quelques minutes)"
-
-msgid "Phone Information"
-msgstr "Informations concernant le téléphone"
-
-msgid "Phone Scan"
-msgstr "Recherche d'un téléphone"
-
-msgid "Phone Scanning Configuration"
-msgstr "Configuration de la recherche d'un téléphone"
-
-msgid "Phones"
-msgstr "Téléphones"
-
-msgid "Ports"
-msgstr "Ports"
-
-msgid "Raw"
-msgstr "Brut"
-
-msgid "Repeat Count"
-msgstr "Nombre de tentatives"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr "Refaire scans (cela peut prendre quelques minutes )"
-
-msgid "SIP Device Information"
-msgstr "Informations concernant le périphérique SIP"
-
-msgid "SIP Device Scan"
-msgstr "Recherche de périphérique SIP"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Configuration de la recherche de périphériques SIP"
-
-msgid "SIP Devices on Network"
-msgstr "Périphériques SIP sur le réseau"
-
-msgid "SIP devices discovered for"
-msgstr "Périphériques SIP  découvert pour"
-
-msgid "Scan for devices on specified networks."
-msgstr "Rechercher des périphériques sur les réseaux spécifiés."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr "Rechercher des périphériques SIP supportés sur les réseaux spécifiés."
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr "Recherches des périphériques sur les réseaux spécifiés."
-
-msgid "Sleep Between Requests"
-msgstr "Attente entre les requêtes"
-
-msgid "Subnet"
-msgstr "Sous-réseau"
-
-msgid "This section contains no values yet"
-msgstr "Cette partie ne contient pas encore de valeur."
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Durée d'attente des réponses en secondes (par défaut 10)"
-
-msgid "Timeout"
-msgstr "Timeout"
-
-msgid "Use Configuration"
-msgstr "Utiliser la configuration"
-
-msgid "Vendor"
-msgstr "Vendeur"
-
-msgid "check other networks"
-msgstr "Explorer d'autres réseaux"
diff --git a/po/fr/ffwizard.po b/po/fr/ffwizard.po
deleted file mode 100644
index b4ed531..0000000
--- a/po/fr/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/fr/firewall.po b/po/fr/firewall.po
deleted file mode 100644
index 56e237f..0000000
--- a/po/fr/firewall.po
+++ /dev/null
@@ -1,689 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2013-02-26 00:44+0200\n"
-"Last-Translator: val56 <valentin_sonet@hotmail.fr>\n"
-"Language-Team: French\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr "-- Choisissez SVP --"
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr "Action"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr "Paramètres avancés"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Permettre la transmission des <em>zones source</em> :"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Permettre la transmission vers les <em>zones destination</em> :"
-
-msgid "Any"
-msgstr "N'importe lequel"
-
-msgid "Covered networks"
-msgstr "Réseaux couverts"
-
-msgid "Custom Rules"
-msgstr "Régles spécifiques"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr "Adresse IP de destination"
-
-msgid "Destination address"
-msgstr "Adresse de destination"
-
-msgid "Destination port"
-msgstr "Port de destination"
-
-msgid "Destination zone"
-msgstr "Zone de destination"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr "Supprimer les paquets invalides"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "Enable NAT Loopback"
-msgstr "Activer le NAT sur la boucle-locale"
-
-msgid "Enable SYN-flood protection"
-msgstr "Activer la protection contre le SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr "Activer les traces (logs) sur cette zone"
-
-msgid "External IP address"
-msgstr "Adresse IP externe"
-
-msgid "External port"
-msgstr "Port externe"
-
-msgid "External zone"
-msgstr "Zone externe"
-
-msgid "Extra arguments"
-msgstr ""
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#  applications/luci-fw/luasrc/model/cbi/luci_fw/zones.lua                    #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-msgid "Firewall"
-msgstr "Pare-feu"
-
-msgid "Firewall - Custom Rules"
-msgstr "Pare-feu -- Règles personnalisées"
-
-msgid "Firewall - Port Forwards"
-msgstr "Pare-feu -- Redirections de ports"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Pare-feu -- Règles de trafic"
-
-msgid "Firewall - Zone Settings"
-msgstr "Pare-feu - Configuration des zones"
-
-msgid "Force connection tracking"
-msgstr "Forcer le suivi des connexions"
-
-msgid "Forward"
-msgstr "Transfert"
-
-msgid "Forward to"
-msgstr "Transférer à"
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Paramètres généraux"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 et IPv6"
-
-msgid "IPv4 only"
-msgstr "IPv4 seulement"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "IPv6 seulement"
-
-msgid "Input"
-msgstr "Entrée"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Transmission entre zones"
-
-msgid "Internal IP address"
-msgstr "Adresse IP interne"
-
-msgid "Internal port"
-msgstr "Port interne"
-
-msgid "Internal zone"
-msgstr "Zone interne"
-
-msgid "Limit log messages"
-msgstr "Limiter les messages de journalisation"
-
-msgid "MSS clamping"
-msgstr "Contrainte du MSS"
-
-msgid "Masquerading"
-msgstr "Masquage"
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr "Type ICMP correspondant"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Prendre en compte le trafic dirigé vers le port de destination donné (ou la "
-"gamme de ports) sur cet hôte"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr "Nom"
-
-msgid "New SNAT rule"
-msgstr "Nouvelle règle SNAT"
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr "Nouvelle règle d'entrée"
-
-msgid "New port forward"
-msgstr "Nouvelle redirection de port"
-
-msgid "New source NAT"
-msgstr "Nouvelle source NAT"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Montrer seulement le trafic entrant provenant de ces adresses MAC."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr "Ports ouverts sur le routeur"
-
-msgid "Other..."
-msgstr "Autre..."
-
-msgid "Output"
-msgstr "Sortie"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr "Redirections de port"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"La redirection de port permet aux ordinateurs distants sur Internet, de se "
-"connecter à un ordinateur ou service spécifié dans le réseau local privé."
-
-msgid "Protocol"
-msgstr "Protocole"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Rediriger le trafic entrant correspondant vers le port donné sur l'hôte "
-"interne"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Rediriger le trafic entrant correspondant vers l'hôte interne spécifié"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-"Restreindre la substitution d'adresses (Masquerade) à ces sous-réseaux "
-"destinataires"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-"Restreindre la substitution d'adresses (Masquerade) à ces sous-réseaux "
-"sources"
-
-msgid "Restrict to address family"
-msgstr "Restreindre à cette famille d'adresses"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr "Adresse IP SNAT"
-
-msgid "SNAT port"
-msgstr "Port SNAT"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#  applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua                    #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Traffic Redirection"
-# msgstr ""
-#
-# msgid ""
-# "Traffic redirection allows you to change the destination address of "
-# "forwarded packets."
-# msgstr ""
-#
-# msgid "Overview"
-# msgstr ""
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "Source zone"
-# msgstr ""
-#
-# msgid "Source MAC-address"
-# msgstr ""
-#
-# msgid "Source port"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-msgid "Source IP address"
-msgstr "Adresse IP source"
-
-msgid "Source MAC address"
-msgstr "Adresse MAC source"
-
-msgid "Source NAT"
-msgstr "Source NAT"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr "Adresse source"
-
-msgid "Source port"
-msgstr "Port source"
-
-msgid "Source zone"
-msgstr "Zone source"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"Le pare-feu crée des zones sur les interfaces réseau pour contrôler le flux "
-"du trafic réseau."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"Les options ci-dessous contrôlent les politiques de transmission entre cette "
-"zone (%s) et les autres zones. <em>Zones de destination</em> couvre le "
-"trafic transfmis <strong>venant de %q</strong>. <em>Zones source</em> "
-"correspond au trafic transféré d'autres zones <strong> à destination de %q</"
-"strong>. La règle de transmission est <em>unidirectionnelle</em>, la "
-"transmission du LAN au WAN n'implique <em>pas</em> également l'autorisation "
-"de transmission du WAN au LAN."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"Cette page vous permet de modifier les propriétés avancées parmi les entrées "
-"de redirection de port. Dans la plupart des cas, cela n'est pas nécessaire "
-"de modifier ces paramètres."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Cette section définit des propriétés communes de %q. Les options <em>entrée</"
-"em> et <em>sortie</em> définissent les politiques par défaut pour le trafic "
-"entrant et sortant de cette zone, tandis que l'option <em>transmission</em> "
-"décrit la politique pour le trafic transmis entre différents réseaux dans "
-"cette zone. Les <em>réseaux couverts</em> indiquent quels réseaux "
-"disponibles sont membre de cette zone."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr "Règles de trafic"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr "Zone %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Zone ⇒ Transmissions"
-
-msgid "Zones"
-msgstr "Zones"
-
-msgid "accept"
-msgstr "accepter"
-
-#, fuzzy
-msgid "any"
-msgstr "tous"
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr "ignorer"
-
-msgid "reject"
-msgstr "rejeter"
-
-#~ msgid "Destination"
-#~ msgstr "Destination"
-
-#~ msgid "Family"
-#~ msgstr "Famille"
-
-#~ msgid "Source"
-#~ msgstr "Source"
-
-#~ msgid "Via"
-#~ msgstr "Via"
-
-#~ msgid "(optional)"
-#~ msgstr "(optionnel)"
-
-#~ msgid "Intended destination address"
-#~ msgstr "Adresse de destination voulue"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Port interne (optionnel)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Options avancées"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#  applications/luci-fw/luasrc/model/cbi/luci_fw/trule.lua                    #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "(optional)"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-# msgid "Source port"
-# msgstr ""
-#
-# msgid "Destination port"
-# msgstr ""
-#
-# msgid "Action"
-# msgstr ""
-#
-# msgid "drop"
-# msgstr ""
-#
-# msgid "accept"
-# msgstr ""
-#
-# msgid "reject"
-# msgstr ""
-#
-#~ msgid "Advanced Rules"
-#~ msgstr "Règles avancées"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Les règles avancées vous laissent personnaliser le pare-feu selon vos "
-#~ "besoins. Seules les nouvelles connexions seront prises en compte. Les "
-#~ "paquets appartenant à des connexions déjà ouvertes sont automatiquement "
-#~ "admis à passer le pare-feu."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Règles spécifiques (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Équipement"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "Pour le DNAT, sélectionne le trafic entrant correspondant à l'adresse IP "
-#~ "destinataire. Pour le SNAT, ré-écrit l'adresse source avec l'adresse "
-#~ "donnée."
-
-#~ msgid ""
-#~ "Match incoming traffic originating from the given source port or port "
-#~ "range on the client host"
-#~ msgstr ""
-#~ "Prendre en compte le trafic entrant provenant du port source donné (ou la "
-#~ "gamme de ports) sur l'hôte client"
-
-#~ msgid "Overview"
-#~ msgstr "Vue d'ensemble"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#  applications/luci-fw/luasrc/model/cbi/luci_fw/miniportfw.lua               #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "(optional)"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-# msgid "External port"
-# msgstr ""
-#
-# msgid "Internal IP address"
-# msgstr ""
-#
-#~ msgid "Port forwarding"
-#~ msgstr "Redirection de port"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "La redirection de port vous permet d'exposer des services réseaux de "
-#~ "votre réseau local au réseau externe."
-
-#~ msgid "Redirection type"
-#~ msgstr "Type de redirection"
-
-#~ msgid "Redirections"
-#~ msgstr "Redirections"
-
-#~ msgid "Rules"
-#~ msgstr "Règles"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#  applications/luci-fw/luasrc/model/cbi/luci_fw/redirect.lua                 #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-#~ msgid "Traffic Redirection"
-#~ msgstr "Redirection du trafic"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "La redirection de trafic vous permet de changer l'adresse de destination "
-#~ "des paquets transférés."
-
-#~ msgid "Network"
-#~ msgstr "Réseau"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#  applications/luci-fw/luasrc/model/cbi/luci_fw/traffic.lua                  #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Name"
-# msgstr ""
-#
-#~ msgid "Traffic Control"
-#~ msgstr "Contrôle de trafic"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Trafic zone-à-zone"
-
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Ici, vous pouvez spécifier quel trafic réseau est autorisé à transiter "
-#~ "entre les zones réseau. Seules les nouvelles connexions seront prises en "
-#~ "compte. Les paquets appartenant à des connexions déjà ouvertes sont "
-#~ "automatiquement admis à passer le pare-feu. Si vous subissez des "
-#~ "problèmes de connexion occasionnels, essayer d'activer le MSS clamping; "
-#~ "sinon laissez-le désactivé pour des raisons de performance."
-
-#~ msgid "Zone"
-#~ msgstr "Zone"
-
-#~ msgid "Destination IP"
-#~ msgstr "IP de destination"
-
-#~ msgid "IP address"
-#~ msgstr "Adresse IP"
-
-#~ msgid "Source MAC-address"
-#~ msgstr "Adresse MAC source"
diff --git a/po/fr/freifunk-policyrouting.po b/po/fr/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/fr/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/fr/freifunk.po b/po/fr/freifunk.po
deleted file mode 100644
index d69b1f1..0000000
--- a/po/fr/freifunk.po
+++ /dev/null
@@ -1,389 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/fr/hd_idle.po b/po/fr/hd_idle.po
deleted file mode 100644
index 4b54e27..0000000
--- a/po/fr/hd_idle.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-11-06 15:20+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "Disque"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "Enable debug"
-msgstr "Activer le débogage"
-
-msgid "Idle-time"
-msgstr "Temps d'inactivité"
-
-msgid "Idle-time unit"
-msgstr "Unité de temps"
-
-msgid "Settings"
-msgstr "Réglages"
-
-# Hours
-msgid "h"
-msgstr "h"
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle est un utilitaire pour arrêter la rotation des disques externes "
-"après une période d'inactivité."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
diff --git a/po/fr/meshwizard.po b/po/fr/meshwizard.po
deleted file mode 100644
index 2c2f312..0000000
--- a/po/fr/meshwizard.po
+++ /dev/null
@@ -1,139 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-11-23 22:20+0200\n"
-"PO-Revision-Date: 2011-11-23 22:20+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr "Cochez ceci pour protéger votre réseau LAN des autres nœuds ou clients"
-
-msgid "Cleanup config"
-msgstr "Nettoyer la config"
-
-msgid "Configure this interface"
-msgstr "Configurer cette interface"
-
-msgid "DHCP IP range"
-msgstr "Gamme d'adresses IP pour DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "Le serveur DHCP donnera automatiquement des adresses IP aux clients"
-
-msgid "Enable DHCP"
-msgstr "Activer le serveur DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Paramètres généraux"
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-"Si vous sélectionnez ceci, la configuration sera nettoyée avant de "
-"positionner de nouvelles options de configuration."
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Mesh IP address"
-msgstr "Adresse IP maillée"
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr "Assistant de Maillage"
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr "Protéger le LAN"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Sélectionnez ceci pour permettre aux autres d'utiliser votre connexion pour "
-"accéder à Internet."
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr "Partager votre connexion Internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"La gamme d'adresses IP utilisée pour attribuer des adresses IP aux clients "
-"(par ex. 10.1.2.1/28). Si ce lot d'adresses est compris dans le réseau "
-"maillé, il sera annoncé comme HNA, sinon du NAT sera utilisé. Si ce champ "
-"reste vide, les valeurs par défaut du profil de la communauté seront "
-"utilisées."
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr "L'adresse IP donnée n'est pas dans le réseau maillé"
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"C'est une adresse unique dans le réseau maillé (par ex. 10.1.1.1) et doit "
-"être enregistré dans votre communauté locale."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Cela configurera une nouvelle interface sans-fil virtuelle en mode Point "
-"d'Accès."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Cet assistant vous aidera à configurer votre routeur pour le réseau maillé "
-"Freifunk ou un autre réseau sans-fil communautaire du même genre."
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Point d'accès virtuel (VAP)"
-
-msgid "Wizard"
-msgstr "Assistant"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Votre matériel et les nœuds voisins doivent utiliser le même canal."
-
-msgid "recommended"
-msgstr "recommandé"
diff --git a/po/fr/minidlna.po b/po/fr/minidlna.po
deleted file mode 100644
index d638b0c..0000000
--- a/po/fr/minidlna.po
+++ /dev/null
@@ -1,164 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/fr/mmc_over_gpio.po b/po/fr/mmc_over_gpio.po
deleted file mode 100644
index 64dc899..0000000
--- a/po/fr/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-11-06 16:06+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr "CLK_pin"
-
-msgid "CS_pin"
-msgstr "CS_pin"
-
-msgid "DI_pin"
-msgstr "DI_pin"
-
-msgid "DO_pin"
-msgstr "DO_pin"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "MMC/SD driver configuration"
-msgstr "Configuration driver MMC/SD"
-
-msgid "Mode"
-msgstr "Mode"
-
-msgid "Name"
-msgstr "Nom"
-
-msgid "Settings"
-msgstr "Configuration"
diff --git a/po/fr/multiwan.po b/po/fr/multiwan.po
deleted file mode 100644
index 39b1421..0000000
--- a/po/fr/multiwan.po
+++ /dev/null
@@ -1,125 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-06 16:07+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Essais avant de déclarer un WAN défaillant"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Essais avant de déclarer qu'un WAN est rétabli"
-
-msgid "Auto"
-msgstr "Auto"
-
-msgid "Collecting data..."
-msgstr "Collection de données..."
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Configuration de règles pour diriger le trafic sortant à travers des liens "
-"WAN sécifiés."
-
-msgid "DNS Server(s)"
-msgstr "Serveur(s) DNS"
-
-msgid "Default Route"
-msgstr "Route par défaut"
-
-msgid "Destination Address"
-msgstr "Adresse de destination"
-
-msgid "Disable"
-msgstr "Désactiver"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "Failing"
-msgstr "Défaillance"
-
-msgid "Failover Traffic Destination"
-msgstr "Destination du trafic en cas de défaillance"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "Hôte(s) à pinguer pour valider le lien"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "Delai max du ping de validation du lien"
-
-msgid "Health Monitor Interval"
-msgstr "Invervalle de validation du lien"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"La validation de liens détecte et corrige les changements du réseau et les "
-"connexions défaillantes."
-
-msgid "KO"
-msgstr "KO"
-
-msgid "Load Balancer Distribution"
-msgstr "Distribution d'équilibrage de charge"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Équilibrage de charge (compatibilité)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Équilibrage de charge (performance)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr "Statut Multi-WAN"
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Règles de trafic avec des liens sortants multiples"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Multi-WAN permet l'utilisation de liens sortants multiples pour la "
-"l'équilibrage de charge et la répartition sur les autres en cas de "
-"défaillance."
-
-msgid "None"
-msgstr "Aucun"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "Ports"
-msgstr "Ports"
-
-msgid "Protocol"
-msgstr "Protocole"
-
-msgid "Recovering"
-msgstr "Récupération"
-
-msgid "Source Address"
-msgstr "Adresse source"
-
-msgid "Unknown"
-msgstr "Inconnu"
-
-msgid "WAN Interfaces"
-msgstr "Interfaces WAN"
-
-msgid "WAN Uplink"
-msgstr "Lien remontant WAN"
-
-msgid "all"
-msgstr "tous"
diff --git a/po/fr/ntpc.po b/po/fr/ntpc.po
deleted file mode 100644
index d417e15..0000000
--- a/po/fr/ntpc.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-11-06 16:08+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "Ajustement de l'horloge"
-
-msgid "Count of time measurements"
-msgstr "Nombre de mesures du temps"
-
-msgid "Current system time"
-msgstr "Temps système actuel"
-
-msgid "General"
-msgstr "Général"
-
-msgid "Hostname"
-msgstr "Nom d'hôte"
-
-msgid "Offset frequency"
-msgstr "Décalage en fréquence"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "Synchronise le temps système"
-
-msgid "Time Server"
-msgstr "Serveur temps "
-
-msgid "Time Servers"
-msgstr "Serveurs de temps"
-
-msgid "Time Synchronisation"
-msgstr "Synchronisation du temps"
-
-msgid "Update interval (in seconds)"
-msgstr "Intervalle de mise à jour (en secondes)"
-
-msgid "empty = infinite"
-msgstr "vide = infini"
diff --git a/po/fr/olsr.po b/po/fr/olsr.po
deleted file mode 100644
index c646fa8..0000000
--- a/po/fr/olsr.po
+++ /dev/null
@@ -1,581 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-01-15 05:35+0200\n"
-"Last-Translator: desillu <ledesillusionniste@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr "IPv6 multidiffusion"
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/fr/openvpn.po b/po/fr/openvpn.po
deleted file mode 100644
index 6959dd7..0000000
--- a/po/fr/openvpn.po
+++ /dev/null
@@ -1,580 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-01-15 07:15+0200\n"
-"Last-Translator: desillu <ledesillusionniste@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p' ou 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Accepter les options envoyées par le serveur"
-
-msgid "Add"
-msgstr "Ajouter"
-
-msgid "Add route after establishing connection"
-msgstr "Ajouter un routage après l'établissement de la connexion"
-
-msgid "Additional authentication over TLS"
-msgstr "Authentification supplémentaire par dessus TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Autoriser le trafic entre clients"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Permettre à plusieurs clients d'utiliser le même certificat"
-
-msgid "Allow only one session"
-msgstr "Autoriser seulement une session"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Autoriser l'hôte distant à changer d'adresse IP ou de port"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Maximum autorisé de clients connectés"
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr "Maximum autorisé de nouvelles connexions"
-
-msgid "Append log to file"
-msgstr "Ajouter les journaux en fin de ce fichier"
-
-msgid "Authenticate using username/password"
-msgstr "S'authentifier par identifiant/mot-de-passe"
-
-msgid "Automatically redirect default route"
-msgstr "Rediriger automatiquement la route par défaut"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Voici ci-dessous la liste d'instances OpenVPN configurées et leur état "
-"courant"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-"Appelle une commande/script d'arrêt avant que le périphérique TUN/TAP soit "
-"fermé"
-
-msgid "Certificate authority"
-msgstr "Autorité des certificats"
-
-msgid "Change process priority"
-msgstr "Modifier la priorité du processus"
-
-msgid "Change to directory before initialization"
-msgstr "Aller dans ce répertorie avant l'initialisation"
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-"Confronter le certificat du distant à une liste des certificats révoqués "
-"(CRL)"
-
-msgid "Chroot to directory after initialization"
-msgstr "Faire un « chroot » dans ce répertoire après initialisation"
-
-msgid "Client is disabled"
-msgstr "Client désactivé"
-
-msgid "Configuration category"
-msgstr "Catégorie de configuration"
-
-msgid "Configure client mode"
-msgstr "Configurer le mode client"
-
-msgid "Configure server bridge"
-msgstr "Configurer le mode pont"
-
-msgid "Configure server mode"
-msgstr "Configurer le mode serveur"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Se connecter via un proxy Socks5"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "Se connecter à un hôte distant via un mandataire HTTP"
-
-msgid "Connection retry interval"
-msgstr "Intervalle entre 2 tentatives de connexion"
-
-msgid "Cryptography"
-msgstr "Cryptage"
-
-msgid "Daemonize after initialization"
-msgstr "Transformer en démon après l'initialisation"
-
-msgid "Delay n seconds after connection"
-msgstr "Attends n secondes après la connexion"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-"Attends avant l'ouverture de tun/tap et l'exécution de scripts de mise en "
-"marche"
-
-msgid "Diffie Hellman parameters"
-msgstr "Paramètres Diffie Hellman"
-
-msgid "Directory for custom client config files"
-msgstr "Répertoire contenant vos fichiers de config client spécifiques"
-
-msgid "Disable Paging"
-msgstr "Désactiver la pagination"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Désactivé le vecteur d'initialisation cipher"
-
-msgid "Disable options consistency check"
-msgstr "Désactiver la vérification de la cohérence des options"
-
-msgid "Disable replay protection"
-msgstr "Désactiver la protection anti-rejeu"
-
-msgid "Do not bind to local address and port"
-msgstr "Ne pas attacher à l'adresse et au port local"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Ne pas exécuter réellement ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "Ne pas ajouter de routes automatiquement"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-"Ne pas copier en cache les mots de passe des options --askpass ou --auth-"
-"user-pass"
-
-msgid "Don't inherit global push options"
-msgstr "Ne pas hériter des options d'envoi globales"
-
-msgid "Don't log timestamps"
-msgstr "Ne pas journaliser les horodatages"
-
-msgid "Don't re-read key on restart"
-msgstr "Ne pas relire la clef au redémarrage"
-
-msgid "Don't require client certificate"
-msgstr "Ne pas exiger un certificat client"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Ne pas utiliser la compression adaptative LZO"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "Ne pas alerter en cas d'incohérence d'ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Écrire les paramètres dans le journal"
-
-msgid "Empirically measure MTU"
-msgstr "Mesurer le MTU empiriquement"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Activer les systèmes de cryptages OpenSSL matériels"
-
-msgid "Enable Path MTU discovery"
-msgstr "Activer la découverte du MTU du chemin"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Activer le mode de cryptage à clef statique (non TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Activer le TLS et prendre le rôle du client"
-
-msgid "Enable TLS and assume server role"
-msgstr "Activer le TLS et prendre le rôle du serveur"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Autoriser la fragmentation des datagrammes en interne"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Activer l'interface de gestion sur <em>IP</em> <em>port</em>"
-
-msgid "Enabled"
-msgstr "Activé"
-
-msgid "Encryption cipher for packets"
-msgstr "Méthode de chiffrement des paquets"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Exécuter une commande shell après l'ajout des routes"
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-"Exécuter une commande Shell suite à un changement d'IP de l'hôte distant"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-"Lancé en mode serveur pour les nouvelles connexions client, quand le client "
-"n'est pas encore reconnu"
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-"Lancé en mode serveur à chaque fois qu'une adresse/route IPv4 ou une adresse "
-"MAC est ajoutée à la table de routage interne d'OpenVPN"
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Arrêter suite à l'échec de la négociation TLS"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-"Obtenir le mot de passe du certificat depuis le terminal avant de passer en "
-"mode démon"
-
-msgid "HMAC authentication for packets"
-msgstr "Authentification HMAC des paquets"
-
-msgid "Handling of authentication failures"
-msgstr "Gestion des erreurs d'authentification"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-"Aide pour simplifier l'expression des --ping et --ping-restart dans les "
-"configurations en mode serveur"
-
-msgid "If hostname resolve fails, retry"
-msgstr "Si la résolution du nom de l'hôte échoue, ré-essayer"
-
-msgid "Instance \"%s\""
-msgstr "Instance \"%s\""
-
-msgid "Invalid"
-msgstr "Invalide"
-
-msgid "Keep local IP address on restart"
-msgstr "Conserver l'adresse IP locale lors du redémarrage"
-
-msgid "Keep remote IP address on restart"
-msgstr "Conserver l'adresse IP distante lors du redémarrage"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Conserver le périphérique tun/tap ouvert au redémarrage"
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr "Limiter les messages répétés dans les journaux"
-
-msgid "Local certificate"
-msgstr "Certificat local"
-
-msgid "Local host name or ip address"
-msgstr "Nom ou adresse IP de l'hôte local"
-
-msgid "Local private key"
-msgstr "Clef privée locale"
-
-msgid "Major mode"
-msgstr "Mode principal"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Rendre le périphérique tun compatible IPv6"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Nombre maximum de paquets TCP en attente d'émission"
-
-msgid "Networking"
-msgstr "Réseau"
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Nombre de tampons de diffusion alloués"
-
-msgid "Number of lines for log file history"
-msgstr "Nombre de lignes de l'historique du fichier-journal"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Accepte seulement des connexions du nom X509 donné"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-"Traiter l'expiration des délais des pings seulement si les routes existent"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Instances OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Optimiser les écritures TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Envoyer à syslog et ne pas transformer en démon"
-
-msgid "Overview"
-msgstr "Vue d'ensemble"
-
-msgid "PKCS#12 file containing keys"
-msgstr "Fichier au format PKCS#12 contenant les clefs"
-
-msgid "Pass environment variables to script"
-msgstr "Transmettre les variables d'environnement au script"
-
-msgid "Persist replay-protection state"
-msgstr "Reconduire l'état de protection anti-rejeu"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Reconduire ou non le lot d'ifconfig"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-"Envoyer un ping à l'hôte distant toutes les n secondes sur le port TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr "Règle de sécurité appliqué à l'usage de programmes et scripts externes"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol"
-msgstr "Protocole"
-
-msgid "Proxy timeout in seconds"
-msgstr "Délai d'attente du mandataire, en secondes"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Envoyer une option ifconfig au distant"
-
-msgid "Push options to peer"
-msgstr "Envoyer les options au client"
-
-msgid "Query management channel for private key"
-msgstr "Canal de requête de gestion pour clef privée"
-
-msgid "Randomly choose remote server"
-msgstr "Choisir au hasard un serveur distant"
-
-msgid "Refuse connection if no custom client config"
-msgstr "Refuser la connexion en l'absence de config client spécifique"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Rediriger les signaux SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Nom ou adresse IP de l'hôte distant"
-
-msgid "Remote ping timeout"
-msgstr "Délai de ping du distant"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Renégocier la clé du canal de données après tant d'octets"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Renégocier la clé du canal de données après tant de paquets"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-"Renégocier la clé du canal de données après tant de temps (en secondes)"
-
-msgid "Replay protection sliding window size"
-msgstr "Taille de la fenêtre glissante pour la protection anti-rejeu"
-
-msgid "Require explicit designation on certificate"
-msgstr "Exiger l'appellation explicite sur le certificat"
-
-msgid "Require explicit key usage on certificate"
-msgstr "Exiger l'utilisation explicite de la clé sur le certificat"
-
-msgid "Restart after remote ping timeout"
-msgstr "Redémarrer aprés le dépassement du délai de ping du distant"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Renvoyer l'expiration du délai sur le canal de contrôle TLS"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Ré-essayer indéfiniment suite à des erreurs du proxy HTTP"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Ré-essayer indéfiniment suite à des erreurs du proxy Socks"
-
-msgid "Route subnet to client"
-msgstr "Router le sous-réseau vers le client"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Exécuter en tant que serveur inetd ou xinetd"
-
-msgid "Run script cmd on client connection"
-msgstr "Exécuter une commande de script lors de la connexion d'un client"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Exécuter une commande de script lors de la déconnexion d'un client"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Exécuter les scripts up/down à tous les redémarrages"
-
-msgid "Send notification to peer on disconnect"
-msgstr "Envoyer une notification au distant à la déconnexion"
-
-msgid "Service"
-msgstr "Service"
-
-msgid "Set GID to group"
-msgstr "Utiliser le GID de ce groupe"
-
-msgid "Set TCP/UDP MTU"
-msgstr "Définir le MTU TCP/UDP"
-
-msgid "Set UID to user"
-msgstr "Utiliser l'UID de cet utilisateur"
-
-msgid "Set aside a pool of subnets"
-msgstr "Mettre de coté un lot de sous-réseaux"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Définir les options de mandataire HTTP étendu"
-
-msgid "Set output verbosity"
-msgstr "Définir la verbosité des écrits"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-"Définir la taille des tables de haché des adresses réelles et virtuelles"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Définir la taille de la pile de réception TCP/UDP"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Définir la taille de la pile d'envoi TCP/UDP"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Définir la taille de la pile TX tun/tap"
-
-msgid "Set tun/tap adapter parameters"
-msgstr "Définir les paramètres de l'adaptateur tun/tap"
-
-msgid "Set tun/tap device MTU"
-msgstr "Définir le MTU du périphérique tun/tap"
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Définir la borne supérieure du MSS TCP"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Gère la bande-passante du distant"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Commande Shell à exécuter après l'ouverture du périphérique tun"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Commande Shell à exécuter après la fermeture du périphérique tun"
-
-msgid "Shell command to verify X509 name"
-msgstr "Commande shell de vérification du nom X509"
-
-msgid "Silence the output of replay warnings"
-msgstr "Supprime les messages d'alertes anti-rejeu"
-
-msgid "Size of cipher key"
-msgstr "Taille de la clé de cryptage"
-
-msgid "Specify a default gateway for routes"
-msgstr "Définir la passerelle par défaut des routes"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Démarrer OpenVPN dans un état d'hibernation"
-
-msgid "Start/Stop"
-msgstr "Démarrer/Arrêter"
-
-msgid "Started"
-msgstr "Démarré"
-
-msgid "Status file format version"
-msgstr "Version du format du fichier de status"
-
-msgid "Switch to advanced configuration »"
-msgstr "Afficher les paramètres de configuration avancés"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Numéro de port TCP/UDP valable pour l'hôte local et l'hôte distant"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Numéro de port TCP/UDP pour l'hôte local (par défaut 1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Numéro de port TCP/UDP pour l'hôte distant (par défaut 1194)"
-
-msgid "TLS cipher"
-msgstr "Méthode de chiffrement TLS"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Répertoire pour le fichier temporaire lié à la connexion d'un client"
-
-msgid "Timeframe for key exchange"
-msgstr "Période d'un échange de clés"
-
-msgid "Type of used device"
-msgstr "Type de périphérique utilisé"
-
-msgid "Use fast LZO compression"
-msgstr "Utiliser la compression LZO rapide"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Utiliser des adresses individuelles plutôt que des sous-réseaux en /30"
-
-msgid "Use protocol"
-msgstr "Utiliser le protocole"
-
-msgid "Use tun/tap device node"
-msgstr "Utiliser le périphérique tun/tap"
-
-msgid "Use username as common name"
-msgstr "Utiliser le nom d'utilisateur comme nom « commun » (du certificat)"
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr "Écrire le journal dans le fichier"
-
-msgid "Write process ID to file"
-msgstr "Écrire le numéro de processus dans le fichier"
-
-msgid "Write status to file every n seconds"
-msgstr "Écrire le status dans le fichier chaque n secondes"
-
-msgid "no"
-msgstr "non"
-
-msgid "tun/tap device"
-msgstr "Périphérique tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr "Délai d'inactivité tun/tap"
-
-msgid "yes (%i)"
-msgstr "oui (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "Afficher les paramètres de configuration standards"
-
-#~ msgid "openvpn_%s"
-#~ msgstr "openvpn_%s"
-
-#~ msgid "openvpn_%s_desc"
-#~ msgstr "openvpn_%s_desc"
diff --git a/po/fr/p2pblock.po b/po/fr/p2pblock.po
deleted file mode 100644
index 524d3d0..0000000
--- a/po/fr/p2pblock.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-06-13 21:39+0200\n"
-"PO-Revision-Date: 2012-01-15 07:06+0200\n"
-"Last-Translator: desillu <ledesillusionniste@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Block Time"
-msgstr "Temps de blocage"
-
-msgid "Enable P2P-Block"
-msgstr "Activer le blocage P2P"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Protocoles de couche 7"
-
-msgid "P2P-Block"
-msgstr "Blocage P2P"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"Le blocage P2P est un mécanisme de liste grise pour bloquer divers "
-"protocoles de pair-à-pair de clients non autorisés."
-
-msgid "Portrange"
-msgstr "Gamme de ports"
-
-msgid "Whitelisted IPs"
-msgstr "Adresses IP autorisées"
-
-msgid "seconds"
-msgstr "secondes"
diff --git a/po/fr/p910nd.po b/po/fr/p910nd.po
deleted file mode 100644
index 275f1b5..0000000
--- a/po/fr/p910nd.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-01-15 07:08+0200\n"
-"Last-Translator: desillu <ledesillusionniste@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Bidirectional mode"
-msgstr "Mode bi-directionnel"
-
-msgid "Device"
-msgstr "Périphérique"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Vous devez d'abord installer les paquets pour gérer des imprimantes USB "
-"(kmod-usb-printer) ou sur port parallèle (kmod-lp)."
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Settings"
-msgstr "Paramètres"
-
-msgid "TCP listener port."
-msgstr "Port d'écoute TCP."
-
-msgid "enable"
-msgstr "activer"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Serveur d'impression"
-
-#~ msgid "port_help"
-#~ msgstr "aide_port"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr ""
-#~ "p910nd écoute sur le port 910+N, par exemple 9100 pour la première "
-#~ "imprimante."
diff --git a/po/fr/pbx-voicemail.po b/po/fr/pbx-voicemail.po
deleted file mode 100644
index 0ccaa50..0000000
--- a/po/fr/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/fr/pbx.po b/po/fr/pbx.po
deleted file mode 100644
index 40f51eb..0000000
--- a/po/fr/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/fr/polipo.po b/po/fr/polipo.po
deleted file mode 100644
index f4e49ae..0000000
--- a/po/fr/polipo.po
+++ /dev/null
@@ -1,206 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/fr/qos.po b/po/fr/qos.po
deleted file mode 100644
index ae901a0..0000000
--- a/po/fr/qos.po
+++ /dev/null
@@ -1,106 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-11-06 16:08+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "Calculer la surcharge"
-
-msgid "Classification Rules"
-msgstr "Règles de classification"
-
-msgid "Classification group"
-msgstr "Groupe de classification"
-
-msgid "Destination host"
-msgstr "Hôte destinataire"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr "Vitesse de téléchargement (kbit/s)"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "Half-duplex"
-msgstr "Demi-duplex"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr "Nombre d'octets"
-
-msgid "Ports"
-msgstr "Ports"
-
-msgid "Protocol"
-msgstr "Protocole"
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr "Qualité de service"
-
-msgid "Service"
-msgstr "Service"
-
-msgid "Source host"
-msgstr "Hôte source"
-
-msgid "Target"
-msgstr "Cible"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr "Vitesse de téléversement (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Avec la <abbr title=\"Quality of Service\">QoS</abbr>, vous pouvez donner "
-"des priorités au trafic réseau en fonction des adresses, des ports ou des "
-"services concernés."
-
-msgid "all"
-msgstr "tous"
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr "par défaut"
-
-msgid "express"
-msgstr "express"
-
-msgid "low"
-msgstr "lent"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "prioritaire"
-
-msgid "qos_connbytes"
-msgstr "qos_connbytes"
diff --git a/po/fr/radvd.po b/po/fr/radvd.po
deleted file mode 100644
index b26e6e0..0000000
--- a/po/fr/radvd.po
+++ /dev/null
@@ -1,472 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-11-23 22:32+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: German\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "6to4 interface"
-msgstr "Interface 6to4"
-
-msgid "Address"
-msgstr "Adresse"
-
-msgid "Addresses"
-msgstr "Adresses"
-
-msgid "Advanced"
-msgstr "Avancé"
-
-msgid "Advertise Home Agent flag"
-msgstr "Drapeau de publication de l'agent Personnel (Home Agent)"
-
-msgid "Advertise router address"
-msgstr "Publier l'adresse du routeur"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Suffixes de domaines publiés"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"IPv6 RDNSS publié. S'il est vide, l'adresse IPv6 courante de l'interface est "
-"utilisée"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Préfixes IPv6 publiés"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Préfixes IPv6 publiés. Si c'est vide, le préfixe actuel de l'interface est "
-"utilisé"
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "Publie la capacité Home Agent d'IPv6 Mobile (RFC 3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr "Publie la capacité d'enregistrement d'un Routeur Mobile (NEMO basique)"
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-"Publie le temps d'accès présumé en milli-secondes des voisins dans le RA "
-"s'il est spécifié. 0 désactive les publications d'accessibilité"
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-"Publie le nombre de sauts par défaut pour les paquets unicast sortants dans "
-"le RA. 0 désactive les publications de nombre de sauts"
-
-msgid "Advertises the default router preference"
-msgstr "Publie la préférence du routeur par défaut"
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-"Publie la valeur donnée de MTU dans les messages RA. 0 désactive la "
-"publication du MTU"
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-"Publie la durée du routeur par défaut, en secondes. 0 indique que le nœud "
-"n'est pas un routeur par défaut"
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-"Publie la durée en secondes pendant laquelle le routeur offre les services "
-"IPv6 Mobile d'agent personnel (Home Agent)"
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-"Publie le temps d'attente en millisecondes entre deux messages de "
-"sollicitation de voisinage dans le RA. 0 indique de ne pas retransmettre les "
-"publications"
-
-msgid "Advertising"
-msgstr "Publication"
-
-msgid "Autonomous"
-msgstr "Autonome"
-
-msgid "Clients"
-msgstr "Clients"
-
-msgid "Configuration flag"
-msgstr "Drapeau de configuration"
-
-msgid "Current hop limit"
-msgstr "Limite de sauts actuelle"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "Configuration DNSSL"
-
-msgid "Default lifetime"
-msgstr "Durée de vie par défaut"
-
-msgid "Default preference"
-msgstr "Préférence par défaut"
-
-msgid "Enable"
-msgstr "Activer"
-
-msgid "Enable advertisements"
-msgstr "Activer les publications"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "Activer les publications et sollicitations du routeur"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-"Active le protocole d'auto-configuration administrée à états supplémentaire "
-"(RFC 2462)"
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-"Active l'auto-configuration d'informations autres que l'adresse "
-"supplémentaires (RFC 2462)"
-
-msgid "General"
-msgstr "Général"
-
-msgid "Home Agent information"
-msgstr "Informations de l'agent personnel (Home Agent)"
-
-msgid "Home Agent lifetime"
-msgstr "Durée de vie de l'agent personnel (Home Agent)"
-
-msgid "Home Agent preference"
-msgstr "Préférence de l'agent personnel (Home Agent)"
-
-msgid "Include Home Agent Information in the RA"
-msgstr "Inclure les informations de l'agent personnel (Home Agent) dans le RA"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-"Inclure l'option de l'intervalle de publication de Mobile IPv6 dans le RA"
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr "Inclure l'adresse de niveau lien de l'interface sortante dans le RA"
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-"Indique que l'adresse de l'interface est envoyée à la place du préfixe "
-"réseau, comme demandé par la norme IPv6 Mobile"
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-"Indique que le lien sous-jacent ne peut faire de publication « broadcast », "
-"pour éviter l'envoi de publications non sollicitées"
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-"Indique que ce préfixe peut être utilisé pour la configuration autonome des "
-"adresses (RFC 4862)"
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-"Indique que ce préfixe peut être utilisé pour la détermination des adresses "
-"liées-au-support (On-Link, RFC 4861)"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Interface Configuration"
-msgstr "Configuration de l'interface"
-
-msgid "Interface required"
-msgstr "Interface nécessaire"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Lifetime"
-msgstr "Durée de vie"
-
-msgid "Link MTU"
-msgstr "MTU du lien"
-
-msgid "Managed flag"
-msgstr "Indicateur de gestion"
-
-msgid "Max. interval"
-msgstr "Intervalle Max"
-
-msgid "Maximum advertisement interval"
-msgstr "Intervalle maximum de publication"
-
-msgid "Minimum advertisement delay"
-msgstr "Délai de publication minimum"
-
-msgid "Minimum advertisement interval"
-msgstr "Intervalle minimum de publication"
-
-msgid "Mobile IPv6"
-msgstr "IPv6 Mobile"
-
-msgid "Mobile IPv6 interval option"
-msgstr "Option d'intervalle pour l'IPv6 Mobile"
-
-msgid "Mobile IPv6 router registration"
-msgstr "Enregistrement du routeur pour IPv6 Mobile"
-
-msgid "Multicast"
-msgstr "Multicast"
-
-msgid "On-link"
-msgstr "lié-au-support (On-link)"
-
-msgid "On-link determination"
-msgstr "Détermination de la liaison-au-support (On-link)"
-
-msgid "Preference"
-msgstr "Préférence"
-
-msgid "Preferred lifetime"
-msgstr "Durée de vie préférée"
-
-msgid "Prefix"
-msgstr "Préfixe"
-
-msgid "Prefix Configuration"
-msgstr "Configuration du préfixe"
-
-msgid "Prefixes"
-msgstr "Préfixes"
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr "Configuration RDNSS"
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr "Radvd - DNSSL"
-
-msgid "Radvd - Interface %q"
-msgstr "Radvd - Interface %q"
-
-msgid "Radvd - Prefix"
-msgstr "Radvd - Préfixe"
-
-msgid "Radvd - RDNSS"
-msgstr "Radvd - RDNSS"
-
-msgid "Radvd - Route"
-msgstr "Radvd - Routage"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-"Radvd est un démon de publication de routage pour IPv6. Il écoute des "
-"sollicitations de routage (Router Sollicitation) et envoie des publications "
-"de routage (Router Advertisement) comme décrit dans la RFC 4861."
-
-msgid "Reachable time"
-msgstr "temps d'accès"
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-"Restreint la communication aux clients spécifiés, laissez vide pour utiliser "
-"le multicast"
-
-msgid "Retransmit timer"
-msgstr "Délai de retransmission"
-
-msgid "Route Configuration"
-msgstr "Configuration du routage"
-
-msgid "Routes"
-msgstr "Routes"
-
-msgid "Source link-layer address"
-msgstr "Adresse-source de niveau lien"
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-"Décrit le nom d'une interface logique de laquelle le préfixe 6to4 sera "
-"déduit. Les adresses IPv4 des interfaces publiques sont combinées avec "
-"2002::/3 et la valeur de l'option de préfixe"
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-"Indique le nom de l'interface logique auquelle cette section est rattachée"
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr "Indique la préférence associée au routeur par défaut"
-
-msgid "Suffix"
-msgstr "Suffixe"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Temps maximum autorisé entre deux émissions de publications multicast non "
-"sollicitées du routeur depuis cette interface, en secondes"
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-"Temps minimum autorisé entre deux émissions de publications multicast du "
-"routeur depuis cette interface, en secondes"
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Temps minimum autorisé entre deux émissions de publications multicast non "
-"sollicitées du routeur depuis cette interface, en secondes"
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr "Préférence pour l'agent personnel (Home Agent) envoyant ce RA"
-
-msgid "Timing"
-msgstr "Délai"
-
-msgid "Unicast only"
-msgstr "Unicast seulement"
-
-msgid "Valid lifetime"
-msgstr "Durée de la validité"
-
-msgid "Validity time"
-msgstr "Durée de validité"
-
-msgid "default"
-msgstr "Défaut"
-
-msgid "high"
-msgstr "haut"
-
-msgid "low"
-msgstr "bas"
-
-msgid "medium"
-msgstr "moyen"
-
-msgid "no"
-msgstr "non"
-
-msgid "yes"
-msgstr "oui"
-
-#~ msgid "Advertised IPv6 prefix"
-#~ msgstr "Préfixe IPv6 publié"
-
-#~ msgid ""
-#~ "Advertised IPv6 prefix. If empty, the current interface prefix is used"
-#~ msgstr ""
-#~ "Préfixe IPv6 publié. S'il est vide, le préfixe actuel de l'interface est "
-#~ "utilisé"
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that addresses generated from "
-#~ "the prefix via stateless address autoconfiguration remain preferred. Use "
-#~ "0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Publie la durée en secondes pendant laquelle les adresses générées depuis "
-#~ "le préfixe via l'auto-configuration sans état restent préférées. 0 "
-#~ "indique une durée infinie"
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that the prefix is valid for the "
-#~ "purpose of on-link determination. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Publie la durée en secondes pendant laquelle le préfixe est valable pour "
-#~ "le choix des adresses liées-au-support (on-link). 0 indique une durée "
-#~ "infinie"
-
-#~ msgid ""
-#~ "Indicates whether that RDNSS continues to be available to hosts even if "
-#~ "they moved to a different subnet"
-#~ msgstr ""
-#~ "Indique si le RDNSS contine d'être disponible aux hôtes même s'ils ont "
-#~ "migré sur un sous-réseau différent"
-
-#~ msgid "Open"
-#~ msgstr "Ouvert"
-
-#~ msgid ""
-#~ "Specifies the lifetime associated with the route in seconds. Use 0 to "
-#~ "specify an infinite lifetime"
-#~ msgstr ""
-#~ "Précise la durée de vie d'une route, en secondes. Utiliser 0 pour une "
-#~ "durée de vie infinie"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the DNSSL entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Indique la durée maximum d'utilisation des entrées DNSSL pour la "
-#~ "résolution de nom. Utiliser 0 pour une durée infinie"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the RDNSS entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Indique la durée maximum d'utilisation des entrées RDNSS pour la "
-#~ "résolution de nom. Utiliser 0 pour une durée infinie"
diff --git a/po/fr/rrdtool.po b/po/fr/rrdtool.po
deleted file mode 100644
index 95545db..0000000
--- a/po/fr/rrdtool.po
+++ /dev/null
@@ -1,358 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/fr/samba.po b/po/fr/samba.po
deleted file mode 100644
index 8877900..0000000
--- a/po/fr/samba.po
+++ /dev/null
@@ -1,84 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-11-23 22:36+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Invités autorisés"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Autoriser les utilisateurs système à atteindre leurs dossiers personnels via "
-"les partages réseau"
-
-msgid "Allowed users"
-msgstr "Utilisateurs autorisés"
-
-msgid "Create mask"
-msgstr "Maque de création"
-
-msgid "Description"
-msgstr "Description"
-
-msgid "Directory mask"
-msgstr "Masque des dossiers"
-
-msgid "Edit Template"
-msgstr "Éditer le modèle"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Éditer le modèle utilisé pour générer la configuration Samba."
-
-msgid "General Settings"
-msgstr "Paramètres généraux"
-
-msgid "Hostname"
-msgstr "Nom d'hôte"
-
-msgid "Mask for new directories"
-msgstr "Masque pour les nouveaux dossiers"
-
-msgid "Mask for new files"
-msgstr "Masque pour les nouveaux fichiers"
-
-msgid "Name"
-msgstr "Nom"
-
-msgid "Network Shares"
-msgstr "Partages réseau"
-
-msgid "Path"
-msgstr "Chemin"
-
-msgid "Read-only"
-msgstr "Lecture seule"
-
-msgid "Share home-directories"
-msgstr "Partager les dossiers personnels"
-
-msgid "Shared Directories"
-msgstr "Dossiers partagés"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Voici le contenu du fichier '/etc/samba/smb.conf.template' d'où sera généré "
-"votre configuration Samba. Les valeurs entre les symboles barre-verticale "
-" (« | ») ne doivent pas être modifiées, elles proviennent de l'onglet "
-"« Paramètres généraux »."
-
-msgid "Workgroup"
-msgstr "Groupe de travail"
diff --git a/po/fr/splash.po b/po/fr/splash.po
deleted file mode 100644
index 3fe2aed..0000000
--- a/po/fr/splash.po
+++ /dev/null
@@ -1,337 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: \n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: Manuel Munz <freifunk@somakoma.de>\n"
-"Language-Team: \n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Accept"
-msgstr "Accepter"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "Clients actifs"
-
-msgid "Allowed hosts/subnets"
-msgstr "Hôtes/sous-réseaux autorisés"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"La limitation de bande-passante des clients est activée seulement quand les "
-"limites montante et descendante sont données. Utilisez ici une valeur de 0 "
-"pour complètement désactiver cette limitation. Les clients autorisés (liste-"
-"blanche) ne sont pas limités."
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr "interdire (liste-noire)"
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr "Durée d'autorisation"
-
-msgid "Client-Splash"
-msgstr "Client-Splash"
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-"Client-Splash est un système d'authentification de HotSpot pour des réseaux "
-"sans-fil maillés."
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-"La vitesse de téléchargement des clients est limitée à cette valeur (en ko/s)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-"Les clients qui auront passé la page d'accueil seront autorisés à utiliser "
-"le réseau pendant ce nombre d'heures donné."
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr "La vitesse montante des clients sera limitée à cette valeur (en ko/s)"
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr "Refuser"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr "Limite en télé-chargement"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr "Zone du pare-feu"
-
-msgid "General"
-msgstr "Général"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hôte"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-"Les hôtes et réseaux listés ici sont exclus de l'accueil du HotSpot, ils ne "
-"seront jamais autorisés."
-
-msgid "IP Address"
-msgstr "Adresse IP"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr "Intercepter le trafic-client sur cette interface"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interfaces that are used for Splash."
-msgstr "Interfaces utilisés pour l'accueil."
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "Adresse MAC"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "Les adresses MAC de cette liste sont bloquées."
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-"Adresses MAC des clients autorisés d'office. Ils n'ont pas à accepter la "
-"page d'accueil et ne sont pas limités en bande-passante."
-
-msgid "Netmask"
-msgstr "Masque"
-
-msgid "Network"
-msgstr "Réseau"
-
-msgid "No clients connected"
-msgstr "Aucun client connecté"
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr "Politique"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Sauvegarder"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr "Les règles du HotSpot sont intégrés dans cette zone du pare-feu"
-
-msgid "Splashtext"
-msgstr "Texte de la page d'accueil"
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "Temps restant"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr "Trafic entrant/sortant"
-
-msgid "Upload limit"
-msgstr "Limite du trafic montant"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr "Liste-blanche"
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr "interdit (par liste-noire)"
-
-msgid "expired"
-msgstr "terminé"
-
-msgid "optional when using host addresses"
-msgstr "optionnel quand on utilise des adresses d'hôtes"
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr "À l'accueil"
-
-msgid "temporarily blocked"
-msgstr "bloqué(s) temporairement"
-
-msgid "unknown"
-msgstr "inconnu"
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr "autorisés par liste blanche"
-
-#~ msgid "Edit Splash text"
-#~ msgstr "Modifier le texte de la page d'accueil"
-
-#~ msgid ""
-#~ "You can change the text that is displayed to clients here.<br /> It is "
-#~ "possible to use the following markers: ###COMMUNITY###, "
-#~ "###COMMUNITY_URL###, ###LEASETIME### and ###ACCEPT###.<br />Click here to "
-#~ "<a href='/luci/splash/'>test the splash page</a> after you saved it."
-#~ msgstr ""
-#~ "Vous pouvez changer ici le texte qui sera présenté aux clients.<br /> Il "
-#~ "est possible d'y inclure les marqueurs suivants : ###COMMUNITY###, "
-#~ "###COMMUNITY_URL###, ###LEASETIME### et ###ACCEPT###.<br />Cliquez ici <a "
-#~ "href=\\'/luci/splash/\\'>tester la page d'accueil</a> une fois celle-ci "
-#~ "sauvegardée."
diff --git a/po/fr/statistics.po b/po/fr/statistics.po
deleted file mode 100644
index f1fec69..0000000
--- a/po/fr/statistics.po
+++ /dev/null
@@ -1,669 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-11-23 22:32+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Action (target)"
-msgstr "Action (cible)"
-
-msgid "Add command for reading values"
-msgstr "Ajoute une commande pour lire des valeurs"
-
-msgid "Add matching rule"
-msgstr "Ajouter une règle à surveiller"
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr "Ajoute une commande de notification"
-
-msgid "Base Directory"
-msgstr "Répertoire de base"
-
-msgid "Basic monitoring"
-msgstr "Surveillance de base"
-
-msgid "CPU Plugin Configuration"
-msgstr "Configuration du greffon sur le CPU"
-
-msgid "CSV Output"
-msgstr "Sortie au format CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Configuration du greffon CSV"
-
-msgid "Cache collected data for"
-msgstr "Mettre en cache les données collectées pendant"
-
-msgid "Cache flush interval"
-msgstr "Intervalle de vidange du cache"
-
-msgid "Chain"
-msgstr "Chaîne"
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Paramètres Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd est un petit démon collectant des données de sources variées à "
-"travers différents greffons. Sur ce page, vous pouvez modifier les "
-"paramètres généraux de ce démon collectd."
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr "Configuration du greffon DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Configuration du greffon DNS"
-
-msgid "Data collection interval"
-msgstr "Période de récupération des données"
-
-msgid "Datasets definition file"
-msgstr "Fichier de définition des lots de données"
-
-msgid "Destination ip range"
-msgstr "plage réseau de destination"
-
-msgid "Directory for collectd plugins"
-msgstr "Répertoire pour les greffons Collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Répertoire pour les sous-configurations"
-
-msgid "Disk Plugin Configuration"
-msgstr "Configuration du greffon Disque"
-
-msgid "Disk Space Usage"
-msgstr "Utilisation de l'espace-disque"
-
-msgid "Disk Usage"
-msgstr "Espace-disque"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Période affichée »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Configuration du greffon des courriels"
-
-msgid "Email"
-msgstr "Courriel"
-
-msgid "Enable this plugin"
-msgstr "Activer ce greffon"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Configuration du greffon Exec"
-
-msgid "Filter class monitoring"
-msgstr "Surveillance des filtres"
-
-msgid "Firewall"
-msgstr "Pare-feu"
-
-msgid "Flush cache after"
-msgstr "Vidanger le cache après"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "Transfert entre les adresses en écoute et du serveur"
-
-msgid "Graphs"
-msgstr "Graphiques"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Vous pouvez définir ici des commandes externes qui seront démarrées par "
-"collectd pour lire certaines valeurs. Ces valeurs seront lisibles depuis "
-"stdout."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Vous pouvez définir ici des commandes externes qui seront démarrées par "
-"collectd quand certaines valeurs-seuil seront atteintes. Les valeurs "
-"induisant ces démarrages seront fournies aux commandes externes via stdin."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Vous pouvez définir ici les critères variés pour sélectionner les règles "
-"iptables à surveiller."
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nom de l'hôte"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr "Configuration du greffon IRQ"
-
-msgid "Ignore source addresses"
-msgstr "Ignorer les adresses-source"
-
-msgid "Incoming interface"
-msgstr "Interface entrante"
-
-msgid "Interface Plugin Configuration"
-msgstr "Configuration du greffon des Interfaces"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interrupts"
-msgstr "Interruptions"
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr "Configuration du greffon IPtables"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr "Hôte en écoute"
-
-msgid "Listen port"
-msgstr "Port en écoute"
-
-msgid "Listener interfaces"
-msgstr "Interfaces en écoute"
-
-msgid "Load Plugin Configuration"
-msgstr "Configuration du greffon de charge-système"
-
-msgid "Maximum allowed connections"
-msgstr "Nb de Connexions autorisées au maximum"
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr "Surveiller tous les ports en écoute locaux"
-
-msgid "Monitor devices"
-msgstr "Périphériques à surveiller"
-
-msgid "Monitor disks and partitions"
-msgstr "Disques et partitions à surveiller"
-
-msgid "Monitor filesystem types"
-msgstr "types de systèmes de fichier à surveiller"
-
-msgid "Monitor hosts"
-msgstr "Hôtes à surveiller"
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr "Surveiller les interruptions"
-
-msgid "Monitor local ports"
-msgstr "Surveiller les ports locaux"
-
-msgid "Monitor mount points"
-msgstr "Points de montage à surveiller"
-
-msgid "Monitor processes"
-msgstr "Processus à surveiller"
-
-msgid "Monitor remote ports"
-msgstr "Surveiller les ports destinataires"
-
-msgid "Name of the rule"
-msgstr "Nom de la règle"
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr "Configuration du greffon du lien-réseau"
-
-msgid "Network"
-msgstr "Réseau"
-
-msgid "Network Plugin Configuration"
-msgstr "Configuration du greffon réseau"
-
-msgid "Network plugins"
-msgstr "Greffons liés au réseau"
-
-msgid "Network protocol"
-msgstr "Protocole réseau"
-
-msgid "Number of threads for data collection"
-msgstr "Nombre de fils pour la récupération des données"
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr "Créer seulement des RRAs moyens"
-
-msgid "Options"
-msgstr "Options"
-
-msgid "Outgoing interface"
-msgstr "Interface sortante"
-
-msgid "Output plugins"
-msgstr "Greffons liés aux résultats"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Configuration du greffon Ping"
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Processus"
-
-msgid "Processes Plugin Configuration"
-msgstr "Configuration du greffon des processus"
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Processeur"
-
-msgid "Qdisc monitoring"
-msgstr "Surveillance Qdisc"
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr "Intervalle de la pulsation RRD"
-
-msgid "RRD step interval"
-msgstr "Intervalle d'avancement RRD"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Configuration du greffon RRDTool"
-
-msgid "Rows per RRA"
-msgstr "Lignes par RRA"
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Secondes"
-
-msgid "Server host"
-msgstr "Hôte du serveur"
-
-msgid "Server port"
-msgstr "Port du serveur"
-
-msgid "Shaping class monitoring"
-msgstr "Surveillance liées à la priorité"
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr "plage réseau source"
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr "Répertoire de stockage"
-
-msgid "Storage directory for the csv files"
-msgstr "Répertoire de stockage pour les fichiers CSV"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Stocke les données sous forme de taux plutôt que de valeurs absolues"
-
-msgid "Stored timespans"
-msgstr "Durée de la période enregistrée"
-
-msgid "System Load"
-msgstr "Charge-système"
-
-msgid "System plugins"
-msgstr "Greffons liés au système"
-
-msgid "TCP Connections"
-msgstr "Connexions TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Configuration du plugin des connexions TCP"
-
-msgid "TTL for network packets"
-msgstr "TTL des paquets-réseau"
-
-msgid "TTL for ping packets"
-msgstr "TTL des paquets ping"
-
-msgid "Table"
-msgstr "Table"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr "Le greffon sur le CPU récupère des données sur l'usage du processeur."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"Le greffon CSV stocke les données collectées dans des fichiers au format CSV "
-"pour être traités ultérieurement par des programmes externes."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"Le plugin DF récupère des données sur l'utilisation de l'espace-disque sur "
-"différents périphériques, points de montage ou types de systèmes de fichiers."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"Le greffon Disque récupère des informations détaillées sur des disques ou "
-"partitions sélectionnées."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"Le greffon DNS récupère des données détaillées à propos du trafic lié au DNS "
-"sur des interfaces sélectionnées."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"Le greffon des courriels crée une socket UNIX qui peut être utilisée pour "
-"transmettre des données sur les courriels à un démon collectd en fonction. "
-"Ce greffon est d'abord destiné à être utilisé avec Mail::SpamAssasin::"
-"Plugin::Collectd mais peut être utilisé d'autres manières également."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"Le greffon Exec lance des commandes externes pour lire des valeurs ou "
-"notifie des processus externes quand certains seuils ont été atteints."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"Ce greffon des interfaces collecte des statistiques de trafic sur les "
-"interfaces sélectionnées."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"Le greffon IPtables surveillera des règles de pare-feu sélectionnées et "
-"collectera des informations sur les octets et paquets IP traités par chaque "
-"règle."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"Le greffon IRG surveillera le taux d'apparitions par seconde de chaque "
-"interruption sélectionnée. Si aucune interruption n'est sélectionnée, toutes "
-"sont surveillées."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-"Le greffon de charge-système collecte des données sur la charge générale du "
-"système."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"Le greffon de lien-réseau récupère sur les interfaces sélectionnées des "
-"informations avancées liées à la QOS, aux classes et au filtrage."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"Le greffon réseau fournit des communications-réseau entre différentes "
-"instances collectd : ce programme peut fonctionner à la fois comme client et "
-"serveur. En mode client, les données collectées localement sont transférées "
-"à un serveur, en mode serveur, l'instance collectd locale reçoit des "
-"informations d'autres hôtes."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"Le greffon ping envoie des paquets ICMP « echo reply » aux hôtes définis et "
-"mesure le temps d'aller-retour avec chacun."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"Le greffon des processus récupère des informations comme le temps CPU, les "
-"défauts de page et l'utilisation mémoire des processus définis."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"Le greffon RRDTool stocke les informations récupérées dans des fichiers de "
-"base de données RRD, sur lesquels s'appuient la génération de graphes.<br /"
-"><br /><strong>Attention : Un mauvais paramètrage peut entraîner une très "
-"grande consommation mémoire dans le répertoire temporaire, qui peut rendre "
-"le matériel inutilisable !</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"Ce paquet d'outils statistiques s'appuie sur le logiciel <a href=\"http://"
-"collectd.org/index.shtml\">Collectd</a> et utilise <a href=\"http://oss."
-"oetiker.ch/rrdtool/\">RRD Tool</a> pour calculer les graphes issus des "
-"données collectées."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"Le greffon des connexions TCP récupère des informations sur les ouvertures "
-"de connexions TCP sur les ports spécifiés."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Cette section définit sur quelles interfaces collectd écoutera des "
-"connexions entrantes."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Cette section définit à quels serveurs sont envoyées les données collectées "
-"localement."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Tente de récupérer des noms d'hôtes complètement qualifiés"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "Socket Unix"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Configuration du greffon de socket Unix"
-
-msgid "Used PID file"
-msgstr "Fichier PID utilisé"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr "Surveillance verbeuse"
-
-msgid "Wireless"
-msgstr "Sans-fil"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr "p.ex. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "p.ex. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "p.ex. reject-with tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "Max. 16 caractères"
-
-msgid "reduces rrd size"
-msgstr "Diminuer la taille RRD"
-
-msgid "seconds; multiple separated by space"
-msgstr "En secondes ; séparer différentes valeurs par des espaces"
-
-msgid "server interfaces"
-msgstr "Interfaces du serveur"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "Le greffon sans-fil récupère des informations sur la puissance du signal "
-#~ "wifi, sa qualité et sur le bruit."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Configuration du greffon sans-fil"
diff --git a/po/fr/tinyproxy.po b/po/fr/tinyproxy.po
deleted file mode 100644
index ca78ca4..0000000
--- a/po/fr/tinyproxy.po
+++ /dev/null
@@ -1,372 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-11-06 16:09+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-"<em>Via proxy</em> route les requêtes vers la cible donnée via le mandataire "
-"amont donné, <em>Reject access</em> interdit tout mandataire amont comme "
-"cible"
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"Ajoute un en-tête HTTP \"X-Tinyproxy\" avec l'adresse IP du client aux "
-"requêtes retransmises"
-
-msgid "Allowed clients"
-msgstr "Clients autorisés"
-
-msgid "Allowed connect ports"
-msgstr "Ports de connexion autorisés"
-
-msgid "Bind address"
-msgstr "Adresse en écoute"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"Par défaut, le filtrage utilise des expressions POSIX basiques. Activez-ceci "
-"pour permettre l'utilisation d'expressions régulières étendues"
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-"Par défaut, les chaînes de caractères des filtres sont utilisées sans faire "
-"attention à leurs casses. Activez-ceci pour les rendre sensible à la casse "
-"des caractères"
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-"Par défaut, le filtrage s'effectue sur les noms de domaines. Activez-ceci "
-"pour l'appliquer plutôt aux URLs"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"Par défaut, les règles de filtrages décrivent ce qui doit être interdit. "
-"Activez cette option pour n'autoriser que les noms de domaines ou URLs qui "
-"correspondent aux règles"
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-"Ce peut être soit une adresse ou une gamme d'adresses IP, un nom de domaine, "
-"ou \".\" pour n'importe quel nom d'hôte sans domaine"
-
-msgid "Configuration"
-msgstr "Configuration"
-
-msgid "Connection timeout"
-msgstr "Délai de connexion"
-
-msgid "Default deny"
-msgstr "Interdit par défaut"
-
-msgid "Enable Tinyproxy server"
-msgstr "Activer le serveur Tinyproxy"
-
-msgid "Error page"
-msgstr "Page d'erreur"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr "Filtrage par RegExp"
-
-msgid "Filter by URLs"
-msgstr "Filtrage par URLs"
-
-msgid "Filter case-sensitive"
-msgstr "Filtrage sensible à la casse"
-
-msgid "Filter file"
-msgstr "Fichier des filtres"
-
-msgid "Filtering and ACLs"
-msgstr "Filtrage et ACLs"
-
-msgid "General settings"
-msgstr "Paramètres généraux"
-
-msgid "Group"
-msgstr "Groupe"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-"Modèle de fichier HTML à utiliser pour les requêtes de statistiques des hôtes"
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "Modèle de fichier HTML à utiliser quand une erreur HTTP survient"
-
-msgid "Header whitelist"
-msgstr "Liste des en-têtes autorisés"
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-"Liste des adresses IP ou gammes d'adresses IP autorisées à utiliser le "
-"serveur mandataire"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-"Liste des ports autorisés pour la méthode CONNECT. Une valeur \"0\" unique "
-"autorises tous les ports"
-
-msgid "Listen address"
-msgstr "Adresse en écoute"
-
-msgid "Listen port"
-msgstr "Port en écoute"
-
-msgid "Log file"
-msgstr "Fichier journal"
-
-msgid "Log file to use for dumping messages"
-msgstr "Fichier-journal utilisé pour y copier les messages"
-
-msgid "Log level"
-msgstr "Niveau de log"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr "Verbosité du journal du processus Tinyproxy"
-
-msgid "Max. clients"
-msgstr "Nombre max. de clients"
-
-msgid "Max. requests per server"
-msgstr "Nombre max. de requêtes par serveur"
-
-msgid "Max. spare servers"
-msgstr "Nombre Maximum de processus serveur"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr "Nombre max autorisé de clients connectés en même temps"
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-"Nombre maximum autorisé de requêtes par processus. S'il est dépassé, le "
-"processus est relancé. Un zéro désactive cette limite."
-
-msgid "Maximum number of prepared idle processes"
-msgstr "Nombre maximum de processus lancés, prêts à traiter des requêtes"
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-"Une connexion inactive est maintenue ouverte pendant cette durée maximum (en "
-"secondes)"
-
-msgid "Min. spare servers"
-msgstr "Nombre Minimum de processus serveur"
-
-msgid "Minimum number of prepared idle processes"
-msgstr "Nombre minimum de processus lancés, prêts à traiter des requêtes"
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-"Nombre de processus lancés en sus, prêts à traiter des requêtes, au "
-"démarrage de Tinyproxy"
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-"Fichier-texte contenant les URLs ou noms de domaines à filtrer, un par ligne"
-
-msgid "Policy"
-msgstr "Action"
-
-msgid "Privacy settings"
-msgstr "Paramètres de confidentialité"
-
-msgid "Reject access"
-msgstr "Refuser l'accès"
-
-msgid "Server Settings"
-msgstr "Paramètres du serveur"
-
-msgid "Server limits"
-msgstr "Limites du serveur"
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-"Indique les noms des entêtes HTTP qui sont autorisées à transiter, tous les "
-"autres seront retirés. Laisser vide pour désactiver le filtrage des entêtes"
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr "Indique le port HTTP où Tinyproxy est en écoute de requêtes"
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-"Indique le nom d'hôte que Tinyproxy utilisera dans l'entête HTTP « Via »"
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-"Décrit l'adresse que Tinyproxy utilisera pour les requêtes retransmises à "
-"l'extérieur"
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr "Indique les adresses où Tinyproxy est en écoute de requêtes"
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-"Indique le nom de groupe sous lequel les processus Tinyproxy fonctionnent"
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-"Indique un mandataire amont à utiliser pour atteindre l'hôte cible. Le "
-"format est <code>adresse:port</code>"
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-"Indique le nom d'utilisateur sous lequel les processus Tinyproxy fonctionnent"
-
-msgid "Start spare servers"
-msgstr "Serveurs en surplus au démarrage"
-
-msgid "Statistics page"
-msgstr "Page de statistiques"
-
-msgid "Status"
-msgstr "Statut"
-
-msgid "Target host"
-msgstr "Hôte de destination"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr "Statut Tinyproxy"
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-
-msgid "Upstream Proxies"
-msgstr "Mandataires amont"
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-"Les règles de mandataires amont définissent les serveurs mandataire à "
-"utiliser pour l'accès à certaines adresses IP ou domaines."
-
-msgid "Use syslog"
-msgstr "Utiliser syslog"
-
-msgid "User"
-msgstr "Utilisateur"
-
-msgid "Via hostname"
-msgstr "nom d'hôte « Via »"
-
-msgid "Via proxy"
-msgstr "Via proxy"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr "Envoyer les messages à syslog plutôt que dans un fichier-journal"
-
-msgid "X-Tinyproxy header"
-msgstr "Entête X-Tinyproxy"
-
-#~ msgid "Allow access from"
-#~ msgstr "Allow access from"
-
-#~ msgid "Allowed headers for anonymous proxy"
-#~ msgstr "Allowed headers for anonymous proxy"
-
-#~ msgid "Bind outgoing traffic to address"
-#~ msgstr "Lier le trafic sortant à l'adresse ip"
-
-#~ msgid "Ports allowed for CONNECT method"
-#~ msgstr "Ports allowed for CONNECT method"
-
-#~ msgid "0 = disabled, empty = all"
-#~ msgstr "0 = disabled, empty = all"
-
-#~ msgid "Error document"
-#~ msgstr "Fichier d'erreur"
-
-#~ msgid "Filter list"
-#~ msgstr "Liste de filtres"
-
-#~ msgid "Case sensitive filters"
-#~ msgstr "Case sensitive filters"
-
-#~ msgid "Filter list is a whitelist"
-#~ msgstr "Filter list is a whitelist"
-
-#~ msgid "Extended regular expression filters"
-#~ msgstr "Extended regular expression filters"
-
-#~ msgid "Filter URLs instead of domains"
-#~ msgstr "Filter URLs instead of domains"
-
-#~ msgid "Listen on address"
-#~ msgstr "Listen on address"
-
-#~ msgid "Logfile"
-#~ msgstr "Chemin du fichier de log"
-
-#~ msgid "Maximum number of clients"
-#~ msgstr "Nombre maximum de clients"
-
-#~ msgid "Maximum requests per thread"
-#~ msgstr "Maximum de connexion par processus"
-
-#~ msgid "Spare servers to start with"
-#~ msgstr "Nombre de processus serveur lancés au demarrage"
-
-#~ msgid "Statistic document"
-#~ msgstr "Fichier de statistiques"
-
-#~ msgid "Write to syslog"
-#~ msgstr "Écrire dans le journal système (Syslog)"
-
-#~ msgid "Connection Timeout"
-#~ msgstr "Délai de connexion"
-
-#~ msgid "Value of Via-Header"
-#~ msgstr "Valeur de l'entête \"VIA\" utilisée comme nom d'hôte"
-
-#~ msgid "Include client IP"
-#~ msgstr "Inclure l'ip du client"
-
-#~ msgid "Upstream Control"
-#~ msgstr "Upstream Control"
-
-#~ msgid "Type"
-#~ msgstr "Type"
-
-#~ msgid "Upstream Proxy"
-#~ msgstr "Proxy"
diff --git a/po/fr/transmission.po b/po/fr/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/fr/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/fr/upnp.po b/po/fr/upnp.po
deleted file mode 100644
index 0fbb2fc..0000000
--- a/po/fr/upnp.po
+++ /dev/null
@@ -1,158 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-11-06 16:09+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"Les ACLs définissent quels ports externes peuvent être redirigés, vers "
-"quelles adresses et ports internes"
-
-msgid "Action"
-msgstr "Action"
-
-msgid "Active UPnP Redirects"
-msgstr "Redirections UPnP actives"
-
-msgid "Advanced Settings"
-msgstr "Paramètres avancés"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-"Permet d'ajouter des redirections seulement vers les adresses IP qui font "
-"des demandes"
-
-msgid "Announced model number"
-msgstr "Numéro de modèle déclaré"
-
-msgid "Announced serial number"
-msgstr "Numéro de série déclaré"
-
-msgid "Clean rules interval"
-msgstr "Intervalle des règles de nettoyage"
-
-msgid "Clean rules threshold"
-msgstr "Niveau des règles de nettoyage"
-
-msgid "Client Address"
-msgstr "Adresse du client"
-
-msgid "Client Port"
-msgstr "Port du client"
-
-msgid "Collecting data..."
-msgstr "Récupération des données…"
-
-msgid "Comment"
-msgstr "Commentaire"
-
-msgid "Delete Redirect"
-msgstr "Détruire la redirection"
-
-msgid "Device UUID"
-msgstr "UUID du périphérique"
-
-msgid "Downlink"
-msgstr "Lien descendant"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Activer la fonctionnalité NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Activer la fonctionnalité UPnP"
-
-msgid "Enable additional logging"
-msgstr "Activer la journalisation additionnelle"
-
-msgid "Enable secure mode"
-msgstr "Activer le mode sécurisé"
-
-msgid "External Port"
-msgstr "Port externe"
-
-msgid "External ports"
-msgstr "Ports externes"
-
-msgid "General Settings"
-msgstr "Paramètres généraux"
-
-msgid "Internal addresses"
-msgstr "Adresses internes"
-
-msgid "Internal ports"
-msgstr "Ports internes"
-
-msgid "MiniUPnP ACLs"
-msgstr "ACLs MiniUPnP"
-
-msgid "MiniUPnP settings"
-msgstr "Paramètres MiniUPnP"
-
-msgid "Notify interval"
-msgstr "Intervalle de notification"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Presentation URL"
-msgstr "URL de présentation"
-
-msgid "Protocol"
-msgstr "Protocole"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Rajoute des informations de debug dans le journal-système"
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-"Indiquer la durée de fonctionnement du système plutôt que celle du démon UPnP"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Démarrer les services UPnP et NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Il n'y a pas de redirections actives."
-
-msgid "UPNP"
-msgstr "UPNP"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permet à des clients du réseau local de configurer automatiquement le "
-"routeur."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permet à des clients du réseau local de configurer automatiquement le "
-"routeur."
-
-msgid "UPnP lease file"
-msgstr "Fichier des baux UPnP"
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Lien remontant"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Valeur en Ko/s, pour information seulement"
-
-msgid "enable"
-msgstr "activer"
diff --git a/po/fr/ushare.po b/po/fr/ushare.po
deleted file mode 100644
index 2b7e8a1..0000000
--- a/po/fr/ushare.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-06-22 21:41+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Content directories"
-msgstr "Répertoires de contenus"
-
-msgid "Disable telnet console"
-msgstr "Désactiver la console Telnet"
-
-msgid "Disable webinterface"
-msgstr "Désactiver l'interface web"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "Options"
-
-msgid "Servername"
-msgstr "Nom du serveur"
-
-msgid "Settings"
-msgstr "Paramètres"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/fr/uvc_streamer.po b/po/fr/uvc_streamer.po
deleted file mode 100644
index 5295f33..0000000
--- a/po/fr/uvc_streamer.po
+++ /dev/null
@@ -1,43 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-11-23 22:22+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "images par seconde"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Résolution"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Paramètres"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Flux de la webcam"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Configurer votre webcam compatible Linux-UVC. Entrez par exemple <a href="
-"\"http://%s:%i/\">http://%s:%i/</a> dans votre navigateur"
diff --git a/po/fr/vnstat.po b/po/fr/vnstat.po
deleted file mode 100644
index 23b644a..0000000
--- a/po/fr/vnstat.po
+++ /dev/null
@@ -1,68 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-11-23 22:33+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: German\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configuration"
-msgstr "Configuration"
-
-msgid "Daily traffic"
-msgstr "Trafic quotidien"
-
-msgid "Graphs"
-msgstr "Graphes"
-
-msgid "Hourly traffic"
-msgstr "Trafic horaire"
-
-msgid "Monitor selected interfaces"
-msgstr "Surveiller les interfaces sélectionnées"
-
-msgid "Monthly traffic"
-msgstr "Trafic mensuel"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Aucun enregistrement n'a encore été configuré. Allez dans la configuration "
-"de VnStat et activez la surveillance d'une ou plusieurs interface(s)."
-
-msgid "Restart VnStat"
-msgstr "Redémarrer VnStat"
-
-msgid "Summary display"
-msgstr "Résumé"
-
-msgid "Top 10 display"
-msgstr "Top 10"
-
-msgid "Update »"
-msgstr "Mise à jour »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Graphiques VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Surveillance du trafic VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat est un outil de surveillance du réseau pour Linux qui garde un "
-"journal du trafic du ou des interface(s) sélectionnée(s)."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "Le service VnStat a été redémarré."
diff --git a/po/fr/voice_core.po b/po/fr/voice_core.po
deleted file mode 100644
index 71ef062..0000000
--- a/po/fr/voice_core.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-06 16:09+0200\n"
-"Last-Translator: hogsim <hogsim@gmail.com>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Téléphones"
-
-msgid "Voice"
-msgstr "Voix"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "Téléphones"
diff --git a/po/fr/voice_diag.po b/po/fr/voice_diag.po
deleted file mode 100644
index c550f06..0000000
--- a/po/fr/voice_diag.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-01-15 07:08+0200\n"
-"Last-Translator: desillu <ledesillusionniste@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Diagnostics"
-msgstr "Diagnostics"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Les diagnostics disponibles pour votre périphérique dépendent des modules "
-"que vous avez installé."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Ce menu contient des options vous permettant de configurer et lancer des "
-"tests sur les fonctions vocales de votre système. Ils sont nommés "
-"diagnostics."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/fr/watchcat.po b/po/fr/watchcat.po
deleted file mode 100644
index 9c9ff04..0000000
--- a/po/fr/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/fr/wol.po b/po/fr/wol.po
deleted file mode 100644
index a7815a5..0000000
--- a/po/fr/wol.po
+++ /dev/null
@@ -1,56 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2011-11-23 22:22+0200\n"
-"Last-Translator: fredb <fblistes+luci@free.fr>\n"
-"Language-Team: French\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Émettre sur toutes les interfaces"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Choisir l'hôte à réveiller ou entrer une adresse MAC à utiliser"
-
-msgid "Host to wake up"
-msgstr "Hôte à réveiller"
-
-msgid "Network interface to use"
-msgstr "Interface réseau à utiliser"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Parfois seul un des deux outils fonctionne. Si l'un échoue, essayez l'autre"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-"Spécifie l'interface sur laquelle le paquet <abbr title=\"Wake on LAN\">WoL</"
-"abbr> est envoyé"
-
-msgid "Starting WoL utility:"
-msgstr "Démarrer l'utilitaire <abbr title=\"Wake on LAN\">WoL</abbr> :"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LAN est un mécanisme pour démarrer à distance les ordinateurs du "
-"réseau local."
-
-msgid "Wake up host"
-msgstr "Réveiller l'hôte"
-
-msgid "WoL program"
-msgstr "Programme <abbr title=\"Wake on LAN\">WoL</abbr>"
diff --git a/po/fr/wshaper.po b/po/fr/wshaper.po
deleted file mode 100644
index ad334c0..0000000
--- a/po/fr/wshaper.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid "Downlink"
-msgstr "Lien descendant (télé-chargement)"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Bande-passante descendante en kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Hôte ou réseau en notation CIDR."
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Low priority destination ports"
-msgstr "Ports-cible à faible priorité"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hôtes-cible à faible priorité"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hôtes-source à faible priorité"
-
-msgid "Low priority source ports"
-msgstr "Ports-source à faible priorité"
-
-msgid "Uplink"
-msgstr "Lien montant (envois)"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Bande-passante montante en kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Paramètres Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper gère la priorités entre les flux pour assurer une faible "
-"latence au trafic interactif même quand votre connexion Internet est très "
-"chargée."
diff --git a/po/he/ahcp.po b/po/he/ahcp.po
deleted file mode 100644
index 7ae52f9..0000000
--- a/po/he/ahcp.po
+++ /dev/null
@@ -1,118 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 03:44+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "שרת AHCP"
-
-# מי שמבין את המונחים הטכניים שיעבור על זה ויתקן.
-#, fuzzy
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP הוא פרוטוקול להגדרה אוטומטית של רשתות IPV6 ו- dual-stack IPv6/IPv4, אשר "
-"עוצב לשימוש כתחליף לגילוי נתבים ול- DHCP ברשתות שבהן קשה או בלתי אפשרי "
-"להגדיר שרת בתוך כל שם מתחם לשידור שכבת קישור, לדוגמה רשתות אד-הוק ניידות."
-
-#, fuzzy
-msgid "Active AHCP Leases"
-msgstr "החכרות AHCP קיימות"
-
-msgid "Address"
-msgstr "כתובת"
-
-msgid "Advanced Settings"
-msgstr "הגדרות מתקדמות"
-
-msgid "Age"
-msgstr "גיל"
-
-msgid "Announced DNS servers"
-msgstr "שרתי DNS מוכרזים"
-
-msgid "Announced NTP servers"
-msgstr "שרתי NTP מוכרזים"
-
-msgid "Announced prefixes"
-msgstr "קידומות מוכרזות"
-
-msgid "Collecting data..."
-msgstr "אוסף נתונים..."
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr "התקנה כללית"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 ו- IPv6"
-
-msgid "IPv4 only"
-msgstr "IPv4 בלבד"
-
-msgid "IPv6 only"
-msgstr "IPv6 בלבד"
-
-#, fuzzy
-msgid "Lease directory"
-msgstr "ספריית החכרות"
-
-# תו
-msgid "Lease validity time"
-msgstr "תוקף ההקצאה"
-
-msgid "Log file"
-msgstr "קובץ רישום"
-
-msgid "Multicast address"
-msgstr "כתובת Multicast"
-
-# אפשר גם מצב פעולה
-msgid "Operation mode"
-msgstr "מצב הפעלה"
-
-msgid "Port"
-msgstr "פורט"
-
-msgid "Protocol family"
-msgstr "משפחת פרוטוקולים"
-
-msgid "Served interfaces"
-msgstr "סיגמנטים מופעלים"
-
-msgid "Server"
-msgstr "שרת"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "שרתי NTP ברשתות IPV4 IPV6"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "שרתי DNS ברשתות IPV4 IPV6"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "קידומת שרתים (CIDR)"
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr "אין הקצאות פעילות."
-
-msgid "Unique ID file"
-msgstr "קובץ מזהה יחודי"
diff --git a/po/he/asterisk.po b/po/he/asterisk.po
deleted file mode 100644
index 25ed5bb..0000000
--- a/po/he/asterisk.po
+++ /dev/null
@@ -1,194 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-07-14 12:48+0200\n"
-"Last-Translator: zstorch <zstorch@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "הגדרות כלליות של Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "תיקית AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "שמור את קבצי הקול במהלך ההקלטה"
-
-#~ msgid "Debug Level"
-#~ msgstr "רמת מצב ניפוי שגיאות"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "בטל חלק מהאזהרות"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "תעד את מצב הליבה בעת נפילת המערכת"
-
-#~ msgid "High Priority"
-#~ msgstr "עדיפות גבוהה"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "מפעיל את Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "השתמש בשעון הפנימי"
-
-#~ msgid "Log directory"
-#~ msgstr "תיקית התיעוד"
-
-# צריך לבדוק אם מדובר על שיחות "בו זמנית" אם כן חשוב לציין אם לא הנל טעות חמורה
-#, fuzzy
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "מקסימום שיחות בו זמנית"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "מקסימות שיחות שבו המערכת תדחה שיחות נוספות"
-
-#~ msgid "Disable console colors"
-#~ msgstr "בטל צבעים במסוף"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "תיקית קבצי הקול"
-
-#~ msgid "The Group to run as"
-#~ msgstr "הפעל עם הרשאות קבוצת"
-
-#~ msgid "The User to run as"
-#~ msgstr "הפעל עם הרשאות משתמש"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "תיקית התא קולי"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "הוסף לUniquID את שם המערכת"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "המר תבניות קול ישירות עם SLINEAR"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "שדר שקט של SLINEAR במהלך הקלטה"
-
-#~ msgid "Verbose Level"
-#~ msgstr "רמת דו\"ח המערכת"
-
-#~ msgid "Time Zone"
-#~ msgstr "אזור זמן"
-
-#~ msgid "Section dialplan"
-#~ msgstr "מחלקה בתוכנית השיחות"
-
-#~ msgid "include"
-#~ msgstr "כולל"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "שלוחה בתוכנית השיחות"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "הגדרות כללית של תוכנית השיחות"
-
-#~ msgid "Allow transfer"
-#~ msgstr "אפשר העברה"
-
-#~ msgid "Clear global vars"
-#~ msgstr "נקה משתנים כללים"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "\"לך אל\" בתוכנית השיחות"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "שיחת ועידה בתוכנית השיחות"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "זמן בתוכנית השיחות"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "תא קולי בתוכנית השיחות"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "אזורי חיוג עבור תוכנית השיחות"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "קידומת להוספה עבור תוכניות שיחה דומות"
-
-#~ msgid "Match International prefix"
-#~ msgstr "השווה קידומת בין לאומית"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "קידומת (0) להוספה או הסרה במספר בין לאומי"
-
-#~ msgid "localzone"
-#~ msgstr "מיקום"
-
-#~ msgid "Match plan"
-#~ msgstr "תוכנית מתאימה"
-
-#~ msgid "Connection to use"
-#~ msgstr "השתמש בחיבור מסוג"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "מיפוי מקשים יעודיים"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "נתב (NAT) בין מכשיר הטלפון לAsterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "בדוק את התגיות בהקדמה"
-
-#, fuzzy
-#~ msgid "Reply Timeout (ms) for down connection"
-#~ msgstr "החזר את פרק זמן (timeout) במילישניות עבור חבורים סגורים"
-
-#~ msgid "Register connection"
-#~ msgstr "חיבור רשום (מנוי)"
-
-#~ msgid "Dial own extension for mailbox"
-#~ msgstr "חיוג סיפרה בודדת עבור תא דואר"
-
-#~ msgid "Client Type"
-#~ msgstr "סוג הלקוח"
-
-#~ msgid "Username"
-#~ msgstr "שם משתמש"
-
-#~ msgid "Allow codecs"
-#~ msgstr "מקודדים מאושרים"
-
-#~ msgid "SIP realm"
-#~ msgstr "מתחם SIP"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "הגדרות כלליות עבור התא קולי"
-
-#~ msgid "From Email address of server"
-#~ msgstr "שדה דואר אלקטרוני מאת (של השרת)"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "תאים קוליים"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "מצורף תוכן ההודעה"
-
-#~ msgid "Email"
-#~ msgstr "דואר אלקטרוני"
-
-#~ msgid "Display Name"
-#~ msgstr "שם תצוגה"
-
-#~ msgid "Password"
-#~ msgstr "סיסמה"
-
-#~ msgid "zone"
-#~ msgstr "אזור"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "הגדרות אזוריות עבור הקול"
-
-#~ msgid "Message Format"
-#~ msgstr "תבנית ההודעה"
diff --git a/po/he/base.po b/po/he/base.po
deleted file mode 100644
index 50358d7..0000000
--- a/po/he/base.po
+++ /dev/null
@@ -1,2789 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-02 14:32+0200\n"
-"Last-Translator: oranav <oranav@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-msgid "(%s available)"
-msgstr "(%s פנוי)"
-
-msgid "(empty)"
-msgstr "(ריק)"
-
-msgid "(no interfaces attached)"
-msgstr "(אין ממשק מצורף)"
-
-msgid "-- Additional Field --"
-msgstr "-- שדה נוסף --"
-
-msgid "-- Please choose --"
-msgstr "-- נא לבחור --"
-
-msgid "-- custom --"
-msgstr "-- מותאם אישית --"
-
-msgid "1 Minute Load:"
-msgstr "עומס במשך דקה:"
-
-msgid "15 Minute Load:"
-msgstr "עומס במשך רבע שעה:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40Mhz, הערוץ הנוסף מעל"
-
-msgid "40MHz 2nd channel below"
-msgstr "40Mhz, הערוץ הנוסף מתחת"
-
-msgid "5 Minute Load:"
-msgstr "עומס במשך 5 דקות:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> יציאת שאילתא"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> יציאת שרת"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "כתובות <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"כתובת או רשת (CIDR) <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "הגדרות <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "שם <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "כתובת-<abbr title=\"Media Access Control\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr "תמיכת AR"
-
-#, fuzzy
-msgid "ARP retry threshold"
-msgstr "סף נסיונות של ARP"
-
-#, fuzzy
-msgid "ATM Bridges"
-msgstr "גשרי ATM"
-
-#, fuzzy
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "מזהה ערוצים ווירטואליים של ATM"
-
-#, fuzzy
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "מזהה נתיבים ווירטואליים של ATM  (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr "מס' התקן של ATM"
-
-msgid "Accept router advertisements"
-msgstr "אפשר פרסומות נתב"
-
-#, fuzzy
-msgid "Access Concentrator"
-msgstr "מרכז גישות"
-
-msgid "Access Point"
-msgstr "נקודת גישה"
-
-msgid "Action"
-msgstr "פעולה"
-
-msgid "Actions"
-msgstr "פעולות"
-
-msgid "Activate this network"
-msgstr "הפעל רשת זו"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-
-msgid "Active Connections"
-msgstr "חיבורים פעילים"
-
-msgid "Active DHCP Leases"
-msgstr "הרשאות DHCP פעילות"
-
-msgid "Active DHCPv6 Leases"
-msgstr "הרשאות DHCPv6 פעילות"
-
-# צריך אימות של מישהו שמבין יותר במושגים האלו אם צריך בכלל לתרגם את זה או להשאיר כמו שזה
-#, fuzzy
-msgid "Ad-Hoc"
-msgstr "אד-הוק"
-
-msgid "Add"
-msgstr "הוסף"
-
-#, fuzzy
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "הוסף דומיין מקומי לשמות המוגשים מהקבצים של המארח"
-
-msgid "Add new interface..."
-msgstr "הוסף ממשק חדש..."
-
-msgid "Additional Hosts files"
-msgstr "קבצי מארח נוספים"
-
-msgid "Address"
-msgstr "כתובת"
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-#, fuzzy
-msgid "Administration"
-msgstr "מנהלה"
-
-msgid "Advanced Settings"
-msgstr "הגדרות מתקדמות"
-
-msgid "Advertise IPv6 on network"
-msgstr "פרסם IPv6 ברשת"
-
-# זהות?
-#, fuzzy
-msgid "Advertised network ID"
-msgstr "פרסם פרטי זהות של הרשת"
-
-#, fuzzy
-msgid "Alert"
-msgstr "אזעקה"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-
-#, fuzzy
-msgid "Allow all except listed"
-msgstr "אפשר הכל חוץ מהרשומים"
-
-msgid "Allow listed only"
-msgstr "אפשר רשומים בלבד"
-
-#, fuzzy
-msgid "Allow localhost"
-msgstr "אפשר localhost"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr "הטווח המורשה הוא 1 עד 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-#, fuzzy
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "רשת נוספת תווצר אם תשאיר את זה לא מסומן"
-
-msgid "Antenna 1"
-msgstr "אנטנה 1"
-
-msgid "Antenna 2"
-msgstr "אנטנה 2"
-
-msgid "Antenna Configuration"
-msgstr "הגדרות אנטנה"
-
-# אזור?
-#, fuzzy
-msgid "Any zone"
-msgstr "כל תחום"
-
-msgid "Apply"
-msgstr "החל"
-
-msgid "Applying changes"
-msgstr "מחיל הגדרות"
-
-msgid "Assign interfaces..."
-msgstr "הקצה ממשקים"
-
-msgid "Associated Stations"
-msgstr "תחנות קשורות"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "שלט אלחוטי Atheros 802.11%s"
-
-msgid "Authentication"
-msgstr "אימות"
-
-msgid "Authoritative"
-msgstr "מוסמך"
-
-msgid "Authorization Required"
-msgstr "דרוש אימות"
-
-msgid "Auto Refresh"
-msgstr "רענון אוטומטי"
-
-msgid "Available"
-msgstr "זמין"
-
-msgid "Available packages"
-msgstr "חבילות זמינות"
-
-msgid "Average:"
-msgstr "ממוצע:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "חזרה"
-
-msgid "Back to Overview"
-msgstr "חזרה לסקירה"
-
-msgid "Back to configuration"
-msgstr "חזרה להגדרות"
-
-msgid "Back to overview"
-msgstr "חזרה לסקירה"
-
-msgid "Back to scan results"
-msgstr "חזרה לתוצאות סריקה"
-
-msgid "Background Scan"
-msgstr "סריקת רקע"
-
-msgid "Backup / Flash Firmware"
-msgstr "גיבוי / קושחת פלאש"
-
-msgid "Backup / Restore"
-msgstr "גיבוי / שחזור"
-
-msgid "Backup file list"
-msgstr "גיבוי רשימת קבצים"
-
-msgid "Bad address specified!"
-msgstr "פורטה כתובת לא תקינה"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"למטה יש את הרשימה הסופית של קבצים לגיבוי. היא מורכבת ע\"י קבצי הגדרות ששונו, "
-"המסומנים ב opkg ׁOpen PacKaGe Managementׂ, קבצי בסיס חיוניים ותבניות הגיבוי "
-"המוגדרות ע\"י המשתמש."
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr "גשר"
-
-msgid "Bridge interfaces"
-msgstr "ממשקי גשר"
-
-msgid "Bridge unit number"
-msgstr "מס' יח' גשר"
-
-#, fuzzy
-msgid "Bring up on boot"
-msgstr "הבא באיתחול"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "שלט אלחוטי Broadcom 802.11%s"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "שלט אלחוטי Broadcom BCM%04x 802.11"
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr "כפתורים"
-
-msgid "CPU"
-msgstr "מעבד"
-
-msgid "CPU usage (%)"
-msgstr "שימוש מעבד (%)"
-
-msgid "Cached"
-msgstr "שמור במטמון"
-
-msgid "Cancel"
-msgstr "בטל"
-
-msgid "Chain"
-msgstr "שרשרת"
-
-msgid "Changes"
-msgstr "שינויים"
-
-msgid "Changes applied."
-msgstr "השינויים הוחלו"
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "משנה את סיסמת המנהל לגישה למכשיר"
-
-msgid "Channel"
-msgstr "ערוץ"
-
-msgid "Check"
-msgstr "לבדוק"
-
-msgid "Checksum"
-msgstr ""
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr ""
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr "סגור חיבורים לא פעילים אחרי מספר השניות שהוגדר, הזן 0 על-מנת לא לסגור"
-
-msgid "Close list..."
-msgstr "סגור רשימה..."
-
-msgid "Collecting data..."
-msgstr "אוסף מידע..."
-
-msgid "Command"
-msgstr "פקודה"
-
-msgid "Common Configuration"
-msgstr "הגדרות נפוצות"
-
-msgid "Compression"
-msgstr "דחיסה"
-
-msgid "Configuration"
-msgstr "הגדרות"
-
-msgid "Configuration applied."
-msgstr "הגדרות הוחלו"
-
-msgid "Configuration files will be kept."
-msgstr "קבצי ההגדרות ישמרו."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr "אישור"
-
-msgid "Connect"
-msgstr "התחבר"
-
-msgid "Connected"
-msgstr "מחובר"
-
-msgid "Connection Limit"
-msgstr "מגבלת חיבורים"
-
-msgid "Connections"
-msgstr "חיבורים"
-
-msgid "Country"
-msgstr "מדינה"
-
-msgid "Country Code"
-msgstr "קוד מדינה"
-
-msgid "Cover the following interface"
-msgstr "כסה את הממשק הבא"
-
-msgid "Cover the following interfaces"
-msgstr "כסה את הממשקים הבאים"
-
-msgid "Create / Assign firewall-zone"
-msgstr "צור / הקצה תחום-חומת אש"
-
-msgid "Create Interface"
-msgstr "צור ממשק"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "צור גשר בין מספר ממשקים"
-
-msgid "Critical"
-msgstr "קריטי"
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr "ממשק מותאם אישית"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"מתאים את הגדרות ה-<abbr title=\"Light Emitting Diode\">LED</abbr>-ים במכשיר "
-"(אם אפשרי)."
-
-msgid "DHCP Leases"
-msgstr "הרשאות DHCP"
-
-msgid "DHCP Server"
-msgstr "שרת DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP ו- DNS"
-
-msgid "DHCP client"
-msgstr "לקוח DHCP"
-
-msgid "DHCP-Options"
-msgstr "אפשרויות-DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "הרשאות DHCPv6"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr "הגדר שם לרשת זו"
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"הגדר אפשרויות DHCP נוספות, למשל \"<code>6,192.168.2.1,192.168.2.2</code>\" "
-"אשר מציגות שרתי DNS שונים ללקוח"
-
-msgid "Delete"
-msgstr "למחוק"
-
-msgid "Delete this interface"
-msgstr "מחק ממשק זה"
-
-msgid "Delete this network"
-msgstr "מחק רשת זו"
-
-msgid "Description"
-msgstr "תיאור"
-
-msgid "Design"
-msgstr "עיצוב"
-
-msgid "Destination"
-msgstr "יעד"
-
-msgid "Device"
-msgstr "מכשיר"
-
-msgid "Device Configuration"
-msgstr "הגדרות מכשיר"
-
-msgid "Diagnostics"
-msgstr "אבחון"
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr ""
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr "מציג רק חבילות המכילות"
-
-msgid "Distance Optimization"
-msgstr ""
-
-msgid "Distance to farthest network member in meters."
-msgstr "מרחק לנק' הרשת הרחוקה ביותר במטרים"
-
-msgid "Diversity"
-msgstr "גיוון"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr ""
-
-msgid "Domain required"
-msgstr ""
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-
-msgid "Download and install package"
-msgstr "הורד והתקן חבילות"
-
-msgid "Download backup"
-msgstr "הורד גיבוי"
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear מאפשר גישת <abbr title=\"Secure Shell\">SSH</abbr> רשתית ושרת <abbr "
-"title=\"Secure Copy\">SCP</abbr> מובנה"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr "<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> דינאמי"
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr ""
-
-msgid "Edit"
-msgstr "ערוך"
-
-msgid "Edit this interface"
-msgstr "ערוך ממשק זה"
-
-msgid "Edit this network"
-msgstr "ערוך רשת זו"
-
-msgid "Emergency"
-msgstr "מצב חרום"
-
-msgid "Enable"
-msgstr "אפשר"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "אפשר <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr "אפשר שרת TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "אפשר תפקוד VLAN"
-
-msgid "Enable learning and aging"
-msgstr "אפשר למידה והזדקנות"
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr ""
-
-msgid "Enabled"
-msgstr "אפשר"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr "הצפנה"
-
-msgid "Erasing..."
-msgstr "מוחק..."
-
-msgid "Error"
-msgstr "שגיאה"
-
-msgid "Ethernet Adapter"
-msgstr ""
-
-msgid "Ethernet Switch"
-msgstr ""
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr ""
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr ""
-
-msgid "Filter"
-msgstr ""
-
-msgid "Filter private"
-msgstr ""
-
-msgid "Filter useless"
-msgstr ""
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr ""
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr ""
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr ""
-
-msgid "Flash Firmware"
-msgstr ""
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr ""
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr ""
-
-msgid "Frame Bursting"
-msgstr ""
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr ""
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr ""
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "Host entries"
-msgstr ""
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr "כתבות IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 ו-IPv6"
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr ""
-
-msgid "Ignore resolve file"
-msgstr ""
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr ""
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr ""
-
-msgid "Initscripts"
-msgstr ""
-
-msgid "Install"
-msgstr ""
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "מספר VLAN שגוי! רק ערכים בין %d לבין %d הם חוקיים."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "שם משתמש ו/או סיסמה שגויים! אנא נסה שנית."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr ""
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr ""
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr ""
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr ""
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr ""
-
-msgid "Leasetime"
-msgstr ""
-
-msgid "Leasetime remaining"
-msgstr ""
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr ""
-
-msgid "Link On"
-msgstr ""
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "עומס"
-
-msgid "Load Average"
-msgstr "עומס ממוצע"
-
-msgid "Loading"
-msgstr "טוען"
-
-msgid "Local IPv4 address"
-msgstr "כתובת IPv4 מקומית"
-
-msgid "Local IPv6 address"
-msgstr "כתובת IPv6 מקומית"
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr "שרת מקומי"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr ""
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr ""
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr ""
-
-msgid "Logout"
-msgstr ""
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr ""
-
-msgid "MAC-Filter"
-msgstr ""
-
-msgid "MAC-List"
-msgstr ""
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr ""
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr ""
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory usage (%)"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Minimum Rate"
-msgstr ""
-
-msgid "Minimum hold time"
-msgstr ""
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Modem device"
-msgstr ""
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr ""
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr ""
-
-msgid "Mount Points"
-msgstr ""
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr ""
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr ""
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "שם"
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr ""
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr "אין רשימת חבילות זמינה"
-
-msgid "No password set!"
-msgstr "לא הוגדרה סיסמה!"
-
-msgid "No rules in this chain"
-msgstr ""
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr "לא מחובר"
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "OPKG-Configuration"
-msgstr ""
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "ישנם שדות המכילים ערכים בלתי חוקיים!"
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr ""
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr ""
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Owner"
-msgstr ""
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr ""
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "שם החבילה"
-
-msgid "Packets"
-msgstr ""
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password authentication"
-msgstr ""
-
-msgid "Password of Private Key"
-msgstr ""
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr ""
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "נתיב למפתח הפרטי"
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr ""
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr "אנא הזן את שם המשתמש והסיסמה שלך:"
-
-msgid "Please wait: Device rebooting..."
-msgstr "אנא המתן: המכשיר מאותחל מחדש..."
-
-msgid "Policy"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr ""
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Prot."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr ""
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr ""
-
-msgid "RX"
-msgstr ""
-
-msgid "RX Rate"
-msgstr "קצב קליטה"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr ""
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr ""
-
-msgid "Receive"
-msgstr ""
-
-msgid "Receiver Antenna"
-msgstr ""
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr ""
-
-msgid "Regulatory Domain"
-msgstr ""
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr ""
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr ""
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr ""
-
-msgid "Reset Counters"
-msgstr ""
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr ""
-
-msgid "Restore backup"
-msgstr ""
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr ""
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr "הרץ בדיקת מערכת קבצים"
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Save & Apply"
-msgstr ""
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr ""
-
-msgid "Scheduled Tasks"
-msgstr ""
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr ""
-
-msgid "Separate WDS"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "שירותים"
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr ""
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr "דלג אל התוכן"
-
-msgid "Skip to navigation"
-msgstr "דלג אל הניווט"
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr "תוכנה"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "חלק מהשדות אינם תקינים, אין אפשרות לשמור את הערכים!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "סליחה, אך האובייקט שביקשת אינו נמצא."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "סליחה, השרת נתקל בשגיאה לא צפויה."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"סליחה, אין תמיכה בעדכון מערכת, ולכן קושחה חדשה חייבת להיצרב ידנית. אנא פנה "
-"אל ה-wiki של OpenWrt עבור הוראות ספציפיות למכשיר שלך."
-
-msgid "Sort"
-msgstr "מיין"
-
-msgid "Source"
-msgstr "מקור"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr ""
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr "אתחול"
-
-msgid "Static IPv4 Routes"
-msgstr "ניתובי IPv4 סטטיים"
-
-msgid "Static IPv6 Routes"
-msgstr "ניתובי IPv6 סטטיים"
-
-msgid "Static Leases"
-msgstr "הקצאות סטטיות"
-
-msgid "Static Routes"
-msgstr "ניתובים סטטיים"
-
-msgid "Static WDS"
-msgstr "WDS סטטי"
-
-msgid "Static address"
-msgstr "כתובת סטטית"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"הקצאות סטטיות נועדו להקצות כתובות IP קבועות ואת שם הרשת שלהן ללקוחות DHCP. "
-"הן נחוצות גם עבור הגדרות ממשק שאינן דינאמיות, בהן מטופלות רק ישויות בעלות "
-"הקצאה מתאימה."
-
-msgid "Status"
-msgstr "מצב"
-
-msgid "Stop"
-msgstr "עצור"
-
-msgid "Strict order"
-msgstr ""
-
-msgid "Submit"
-msgstr "שלח"
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr ""
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "System Log"
-msgstr ""
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "הגדרות TFTP"
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr "שידור"
-
-msgid "TX Rate"
-msgstr "קצב שידור"
-
-msgid "Table"
-msgstr "טבלה"
-
-msgid "Target"
-msgstr "יעד"
-
-msgid "Terminate"
-msgstr ""
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr ""
-
-msgid "The following rules are currently active on this system."
-msgstr "החוקים הבאים מאופשרים כרגע במערכת זו."
-
-msgid "The given network name is not unique"
-msgstr "השם שניתן לרשת איננו ייחודי"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr "החומרה אינה תומכת בריבוי SSID ולכן ההגדרות הנוכחיות יוחלפו אם תמשיך."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr "רשימה זו מציגה סקירה של תהליכי המערכת הרצים כרגע ואת מצבם."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "דף זה מאפשר להגדיר פעולות מיוחדות עבור הלחצנים."
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "דף זה מציג סקירה של חיבורי הרשת הפעילים כרגע."
-
-msgid "This section contains no values yet"
-msgstr "אזור זה עדיין לא מכיל ערכים."
-
-msgid "Time Synchronization"
-msgstr "סנכרון זמן"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "סנכרון זמן עדיין לא הוגדר."
-
-msgid "Timezone"
-msgstr "אזור זמן"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"על מנת לשחזר את קבצי ההגדרות, באפשרותך להעלות ארכיון גיבוי שנוצר לפני כן."
-
-msgid "Total Available"
-msgstr "סה\"כ פנוי"
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "תעבורה"
-
-msgid "Transfer"
-msgstr "העברה"
-
-msgid "Transmission Rate"
-msgstr "קצב שידור"
-
-msgid "Transmit"
-msgstr "שידור"
-
-msgid "Transmit Power"
-msgstr "עוצמת שידור"
-
-msgid "Transmitter Antenna"
-msgstr "אנטנת שידור"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr ""
-
-msgid "Tx-Power"
-msgstr "עוצמת שידור"
-
-msgid "Type"
-msgstr ""
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr ""
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr ""
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr "השתמש בדגל broadcast"
-
-msgid "Use custom DNS servers"
-msgstr "השתמש בשרתי DNS מותאמים אישית"
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr "השתמש בטבלת ניתוב"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr ""
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr "שם משתמש"
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr "שרת VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "גרסה"
-
-msgid "WDS"
-msgstr ""
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr "סיסמת WEP"
-
-msgid "WMM Mode"
-msgstr ""
-
-msgid "WPA passphrase"
-msgstr "סיסמת WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr "אזהרה"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "אזהרה: ישנם שינויים שלא נשמרו ויאבדו בעת הפעלה מחדש!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr ""
-
-msgid "Wireless Network"
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr "רשת אלחוטית מנוטרלת"
-
-msgid "Wireless network is enabled"
-msgstr "רשת אלחוטית מאופשרת"
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr ""
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "אתה חייב להפעיל את Java Script בדפדפן שלך; אחרת, LuCI לא יפעל כראוי."
-
-msgid "any"
-msgstr "כלשהו"
-
-msgid "auto"
-msgstr "אוטומטי"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr ""
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "בטל"
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-
-msgid "forward"
-msgstr "קדימה"
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "עזרה"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "אם היעד הוא רשת"
-
-msgid "input"
-msgstr "קלט"
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-
-msgid "no"
-msgstr "לא"
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "ללא"
-
-msgid "off"
-msgstr "כבוי"
-
-msgid "on"
-msgstr "פועל"
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr "מנותב"
-
-msgid "tagged"
-msgstr "מתויג"
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr "ללא הגבלה"
-
-msgid "unspecified"
-msgstr "לא מוגדר"
-
-msgid "unspecified -or- create:"
-msgstr "לא מוגדר -או- יצר"
-
-msgid "untagged"
-msgstr "לא מתויג"
-
-msgid "yes"
-msgstr "כן"
-
-msgid "« Back"
-msgstr "<< אחורה"
-
-#~ msgid "Freifunk"
-#~ msgstr "אריג"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "רשתות Wifi בסביבתך"
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "האם למחוק את הרשת האלחוטית הזו? המחיקה אינה ניתנת לביטול!\n"
-#~ "ייתכן ותאבד גישה לנתב הזה אם אתה מחובר דרך השרת הזו."
-
-#~ msgid "static"
-#~ msgstr "סטטי"
diff --git a/po/he/commands.po b/po/he/commands.po
deleted file mode 100644
index 0e9e65d..0000000
--- a/po/he/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/he/coovachilli.po b/po/he/coovachilli.po
deleted file mode 100644
index 04efb54..0000000
--- a/po/he/coovachilli.po
+++ /dev/null
@@ -1,26 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 03:37+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr ""
-
-msgid "Network Configuration"
-msgstr "תצורת רשת"
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr "אימות UAM ן- MAC"
diff --git a/po/he/ddns.po b/po/he/ddns.po
deleted file mode 100644
index 1e66f7f..0000000
--- a/po/he/ddns.po
+++ /dev/null
@@ -1,93 +0,0 @@
-# Generated from applications/luci-ddns/luasrc/model/cbi/ddns/ddns.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-09-10 04:26+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "בצע בדיקה ל- IP שהתחלף כל"
-
-msgid "Check-time unit"
-msgstr "בדוק-יחידת זמן"
-
-#, fuzzy
-msgid "Custom update-URL"
-msgstr "עדכן URL באופן ידני"
-
-msgid "Dynamic DNS"
-msgstr "DNS דינאמי"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"שירות DDNS מאפשר גישה לנתב שלך ע\"י שם דומיין קבוע, בעוד כתובת ה- IP שלך "
-"משתנה באופן דינמי."
-
-msgid "Enable"
-msgstr "אפשר"
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "אלץ עדכון כל"
-
-#, fuzzy
-msgid "Force-time unit"
-msgstr "יחידת זמן של אילוץ"
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr "ממשק"
-
-msgid "Network"
-msgstr "רשת"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr "סיסמא"
-
-msgid "Service"
-msgstr "שירות"
-
-msgid "Source of IP address"
-msgstr "מקור כתובת IP"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "שם משתמש"
-
-msgid "custom"
-msgstr "מותאם אישית"
-
-# Hours
-msgid "h"
-msgstr "ש'"
-
-msgid "interface"
-msgstr "ממשק"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "דק'"
-
-msgid "network"
-msgstr "רשת"
diff --git a/po/he/diag_core.po b/po/he/diag_core.po
deleted file mode 100644
index b4d73e0..0000000
--- a/po/he/diag_core.po
+++ /dev/null
@@ -1,30 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/he/diag_devinfo.po b/po/he/diag_devinfo.po
deleted file mode 100644
index 7161955..0000000
--- a/po/he/diag_devinfo.po
+++ /dev/null
@@ -1,206 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/he/ffwizard.po b/po/he/ffwizard.po
deleted file mode 100644
index 3b13704..0000000
--- a/po/he/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/he/firewall.po b/po/he/firewall.po
deleted file mode 100644
index f35686a..0000000
--- a/po/he/firewall.po
+++ /dev/null
@@ -1,429 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr ""
-
-msgid "Destination port"
-msgstr ""
-
-msgid "Destination zone"
-msgstr ""
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr ""
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr ""
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr ""
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr ""
-
-msgid "Internal port"
-msgstr ""
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr ""
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr ""
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-msgid "Source IP address"
-msgstr ""
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid "Source port"
-msgstr ""
-
-msgid "Source zone"
-msgstr ""
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr ""
-
-msgid "accept"
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr ""
diff --git a/po/he/freifunk-policyrouting.po b/po/he/freifunk-policyrouting.po
deleted file mode 100644
index 8d83098..0000000
--- a/po/he/freifunk-policyrouting.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/he/freifunk.po b/po/he/freifunk.po
deleted file mode 100644
index e9f603d..0000000
--- a/po/he/freifunk.po
+++ /dev/null
@@ -1,388 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-22 02:48+0200\n"
-"Last-Translator: citizen.amitai <citizen.amitai@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr "חלש"
-
-msgid "Basic Settings"
-msgstr "הגדרות בסיס"
-
-msgid "Basic settings"
-msgstr "הגדרות בסיס"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "לא סיימת להגדיר את הגדרות הבסיס. תחזור ל"
-
-msgid "Basic system settings"
-msgstr "הגדרות מערכת"
-
-msgid "Bitrate"
-msgstr "קצב העברה"
-
-msgid "Channel"
-msgstr "ערוץ"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr "בדוק אם קיים גרסת חומרה חדשה ובצע עדכון אוטומטי"
-
-msgid "Client network size"
-msgstr "גודל הרשת"
-
-msgid "Community"
-msgstr "קהילה"
-
-msgid "Community profile"
-msgstr "פרופיל הקהילה"
-
-msgid "Community settings"
-msgstr "הגדרות קהילה"
-
-msgid "Confirm Upgrade"
-msgstr "אשר שדרוג"
-
-msgid "Contact"
-msgstr "צור קשר"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr "קוד מדינה"
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr "אימייל"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr "ערוך דף אינדקס"
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr "שגיאה"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "מצא את המיקום שלך עם OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "אריג"
-
-msgid "Freifunk Overview"
-msgstr "סקירה כללית על אריג"
-
-msgid "Freifunk Remote Update"
-msgstr "עדכון מרחוק "
-
-msgid "Gateway"
-msgstr "שער"
-
-msgid "Go to"
-msgstr "עבור אל"
-
-msgid "Good (2 < ETX < 4)"
-msgstr "טוב"
-
-msgid "Green"
-msgstr "ירוק"
-
-msgid "Hello and welcome in the network of"
-msgstr "שלום וברוך הבא לרשת "
-
-msgid "Hide OpenStreetMap"
-msgstr "הסתר OpenStreetMap"
-
-msgid "Homepage"
-msgstr "דף הבית"
-
-msgid "Hostname"
-msgstr "שם מחשב"
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr "אם מסומן, תוכן ברירת המחדל לא יופיע"
-
-msgid "If you are interested in our project then contact the local community"
-msgstr "אם הנכם מעוניינים בפרוייקט שלנו אנא צרו קשר עם הקהילה באזורכם"
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr "ממשק"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr "זה מופעל ע\"י"
-
-msgid "Keep configuration"
-msgstr "שמור הגדרות"
-
-msgid "Latitude"
-msgstr "רוחב"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr "טען"
-
-msgid "Local Time"
-msgstr "זמן מקומי"
-
-msgid "Location"
-msgstr "מיקום"
-
-msgid "Longitude"
-msgstr "אורך"
-
-msgid "Map"
-msgstr "מפה"
-
-msgid "Map Error"
-msgstr "שגיאת מפה"
-
-msgid "Memory"
-msgstr "זכרון"
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr "מצב"
-
-msgid "Network"
-msgstr "רשת"
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr "כינוי"
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr "סקירה"
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr "אנא הזינו פרטי יצירת קשר"
-
-msgid "Power"
-msgstr "כח"
-
-msgid "Processor"
-msgstr "מעבד"
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr "פרופיל (מומחה)"
-
-msgid "Realname"
-msgstr "שם אמיתי"
-
-msgid "Red"
-msgstr "אדום"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr "פתח OpenStreetMap"
-
-msgid "Show on map"
-msgstr "הצג על גבי מפה"
-
-msgid "Signal"
-msgstr "אות"
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr "התחל שדרוג"
-
-msgid "Statistics"
-msgstr "סטטיסטיקה"
-
-msgid "Status"
-msgstr "סטטוס"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr "מתפקד"
-
-msgid "System"
-msgstr "מערכת"
-
-msgid "TX"
-msgstr "TX"
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr "יוזמה לביסוס רשת אריג אל-חוטית שתהיה חינמית, נגישה, ועצמאית"
-
-msgid "Wireless Overview"
-msgstr "סקירת הרשת האלחוטית"
-
-msgid "Yellow"
-msgstr "צהוב"
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/he/hd_idle.po b/po/he/hd_idle.po
deleted file mode 100644
index 6a268f4..0000000
--- a/po/he/hd_idle.po
+++ /dev/null
@@ -1,52 +0,0 @@
-# Generated from applications/luci-hd-idle/luasrc/model/cbi/hd_idle.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2011-06-25 11:35+0200\n"
-"Last-Translator: GiladL <gl1000007@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Disk"
-msgstr "כונן"
-
-msgid "Enable"
-msgstr "אפשר"
-
-msgid "Enable debug"
-msgstr "אפשר ניפוי שגיאות"
-
-msgid "Idle-time"
-msgstr "זמן חוסר פעילות"
-
-msgid "Idle-time unit"
-msgstr "יחידת זמן חוסר פעילות"
-
-msgid "Settings"
-msgstr "הגדרות"
-
-# Hours
-msgid "h"
-msgstr "ש'"
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle הינה תוכנת שירות שמטרתה להקטין את מהירות הסיבוב של כוננים חיצוניים "
-"לאחר זמן מסוים של חוסר פעילות."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "דק'"
diff --git a/po/he/meshwizard.po b/po/he/meshwizard.po
deleted file mode 100644
index f887a89..0000000
--- a/po/he/meshwizard.po
+++ /dev/null
@@ -1,119 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/he/minidlna.po b/po/he/minidlna.po
deleted file mode 100644
index 48c6188..0000000
--- a/po/he/minidlna.po
+++ /dev/null
@@ -1,164 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/he/mmc_over_gpio.po b/po/he/mmc_over_gpio.po
deleted file mode 100644
index bf506c0..0000000
--- a/po/he/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 04:34+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr "אפשר"
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr "שם"
-
-msgid "Settings"
-msgstr "הגדרות"
diff --git a/po/he/multiwan.po b/po/he/multiwan.po
deleted file mode 100644
index 2188822..0000000
--- a/po/he/multiwan.po
+++ /dev/null
@@ -1,115 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/he/ntpc.po b/po/he/ntpc.po
deleted file mode 100644
index 9d2bee6..0000000
--- a/po/he/ntpc.po
+++ /dev/null
@@ -1,59 +0,0 @@
-# Generated from applications/luci-ntpc/luasrc/model/cbi/ntpc/*.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2011-06-25 11:40+0200\n"
-"Last-Translator: GiladL <gl1000007@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-# התאמת שעון?
-#, fuzzy
-msgid "Clock Adjustment"
-msgstr "כיוון שעון"
-
-#, fuzzy
-msgid "Count of time measurements"
-msgstr "ספירת יחידות זמן"
-
-msgid "Current system time"
-msgstr "זמן מערכת נוכחי"
-
-msgid "General"
-msgstr "כללי"
-
-msgid "Hostname"
-msgstr "שם מארח"
-
-#, fuzzy
-msgid "Offset frequency"
-msgstr "תדירות סטייה"
-
-msgid "Port"
-msgstr "פורט"
-
-msgid "Synchronizes the system time"
-msgstr "מסנכרן את זמן המערכת"
-
-msgid "Time Server"
-msgstr ""
-
-msgid "Time Servers"
-msgstr "שרתי זמן"
-
-msgid "Time Synchronisation"
-msgstr "סנכרון זמן"
-
-msgid "Update interval (in seconds)"
-msgstr "מרווח בין עדכונים (בשניות)"
-
-msgid "empty = infinite"
-msgstr "ריק = אינסופי"
diff --git a/po/he/olsr.po b/po/he/olsr.po
deleted file mode 100644
index 7c5e5bb..0000000
--- a/po/he/olsr.po
+++ /dev/null
@@ -1,576 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/he/openvpn.po b/po/he/openvpn.po
deleted file mode 100644
index bf02ef3..0000000
--- a/po/he/openvpn.po
+++ /dev/null
@@ -1,547 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/he/p2pblock.po b/po/he/p2pblock.po
deleted file mode 100644
index 5b2679b..0000000
--- a/po/he/p2pblock.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 03:39+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Block Time"
-msgstr "זמן חסימה"
-
-msgid "Enable P2P-Block"
-msgstr "אפשר חסימת P2P"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "פרוטוקולי Layer7"
-
-msgid "P2P-Block"
-msgstr "חסימת P2P"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"חסימת P2P הינו מנגנון ליצירת 'רשימה אפורה', במטרה לחסום סוגים שונים של "
-"פרוטוקולי P2P עבור לקוחות שאינם ב'רשימה הלבנה'."
-
-msgid "Portrange"
-msgstr "טווח פורטים"
-
-msgid "Whitelisted IPs"
-msgstr "כתובות IP ברשימה הלבנה"
-
-msgid "seconds"
-msgstr "שניות"
diff --git a/po/he/p910nd.po b/po/he/p910nd.po
deleted file mode 100644
index e553966..0000000
--- a/po/he/p910nd.po
+++ /dev/null
@@ -1,47 +0,0 @@
-#  p910nd.pot
-#  generated from ./applications/luci-p910nd/luasrc/i18n/p910nd.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 03:43+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Bidirectional mode"
-msgstr "מצב דו-כיווני."
-
-msgid "Device"
-msgstr "התקן"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"ראשית עליך להתקין את החבילות כדי לקבל תמיכה ב- USB (kmod-usb-printer) או "
-"בחיבור מקבילי (kmod-lp)."
-
-# "יציאה" או "יציאת התקן" ?
-#, fuzzy
-msgid "Port"
-msgstr "יציאת התקן"
-
-msgid "Settings"
-msgstr "הגדרות"
-
-msgid "TCP listener port."
-msgstr "יציאת האזנה ל- TCP"
-
-msgid "enable"
-msgstr "לאפשר"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - שרת מדפסות"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr "p910nd מאזין לפורט 910+N (למשל 9100) עבור המדפסת הראשונה."
diff --git a/po/he/pbx-voicemail.po b/po/he/pbx-voicemail.po
deleted file mode 100644
index be25f0b..0000000
--- a/po/he/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/he/pbx.po b/po/he/pbx.po
deleted file mode 100644
index de74ec9..0000000
--- a/po/he/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/he/polipo.po b/po/he/polipo.po
deleted file mode 100644
index 931228e..0000000
--- a/po/he/polipo.po
+++ /dev/null
@@ -1,202 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/he/qos.po b/po/he/qos.po
deleted file mode 100644
index fc8cd58..0000000
--- a/po/he/qos.po
+++ /dev/null
@@ -1,103 +0,0 @@
-# Generated from applications/luci-qos/luasrc/model/cbi/qos/qos.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2010-03-25 22:10+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/he/radvd.po b/po/he/radvd.po
deleted file mode 100644
index 63ec168..0000000
--- a/po/he/radvd.po
+++ /dev/null
@@ -1,367 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/he/rrdtool.po b/po/he/rrdtool.po
deleted file mode 100644
index 32b74f7..0000000
--- a/po/he/rrdtool.po
+++ /dev/null
@@ -1,356 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/he/samba.po b/po/he/samba.po
deleted file mode 100644
index dd21a4a..0000000
--- a/po/he/samba.po
+++ /dev/null
@@ -1,73 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Allow guests"
-msgstr ""
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-
-msgid "Allowed users"
-msgstr ""
-
-msgid "Create mask"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Directory mask"
-msgstr ""
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Mask for new directories"
-msgstr ""
-
-msgid "Mask for new files"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr ""
-
-msgid "Path"
-msgstr ""
-
-msgid "Read-only"
-msgstr ""
-
-msgid "Share home-directories"
-msgstr ""
-
-msgid "Shared Directories"
-msgstr ""
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr ""
diff --git a/po/he/splash.po b/po/he/splash.po
deleted file mode 100644
index 6402360..0000000
--- a/po/he/splash.po
+++ /dev/null
@@ -1,330 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-09-10 04:38+0200\n"
-"PO-Revision-Date: 2012-09-10 04:58+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-"החיבור לאינטרנט יכול להתאפשר בגלל שכמה פעילים של הפרוייקט משתפים את חיבור "
-"האינטרנט האישי שלהם. אותם חיבורים מעטים משותפים בין כל המשתמשים. משמע רוחב "
-"הפס הזמין מוגבל ולכן אנו מבקשים מכם לא לעשות את הדברים הבאים:"
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr "הפוך לחבר פעיל של הקהילה ועזור ע\"י תפעול נקודה של עצמך"
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr "חסומים"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr "דחה"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr "תרום כסף על מנת שנוכל לשמור על הפרוייקט הזה חי."
-
-msgid "Download limit"
-msgstr "הגבלת הורדה"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr "כללי"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr "כתובת IP"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr "אם הנך מפעיל מכשירי wifi של עצמך השתמש בערוצים שונים משלנו."
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr "אם הנך משתמש ברשת זו על בסיס קבוע אנו מבקשים את תמיכתך:"
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "ממשקים"
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-"KB/s (הורדה/העלאה). הנך יכול להוריד מגבלה זו ע\"י תרומה פעילה לפרוייקט זה."
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "כתובת MAC"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "כתובות MAC ברשימה זו הינם חסומים."
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "רשת"
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr "שים לב שאנו לא ספק אינטרנט אלא רשת חברתית נסיונית."
-
-msgid "Policy"
-msgstr "מדיניות"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "שמור"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "זמן שנותר"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-"על מנת לשאול לסיבה שבגגלה נחסמת או לבקש גישה מחדש הנך יכול לנסות ליצור קשר "
-"עם הבעלים של נקודת גישה זו:"
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr "הגבלת העלאה"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr "ברוכים הבאים"
-
-msgid "Whitelist"
-msgstr ""
-
-#, fuzzy
-msgid "You are now connected to the free wireless mesh network"
-msgstr "הנך מחובר כעת לרשת האלחוטית החינמית"
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-"הגישה שלך לרשת זו נחסמה, ככל הנראה בגלל שעשית משהו שהחוקים שלנו אוסרים "
-"במפורש."
-
-msgid "Your bandwidth is limited to"
-msgstr "רוחב הפס שלך מוגבל ל"
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr "פג תוקף"
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr "בצע פעילות בלתי חוקית מכל סוג שהוא"
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr "חסום זמנית"
-
-msgid "unknown"
-msgstr "לא ידוע"
-
-msgid "use filesharing applications on this network"
-msgstr "השתמש בתוכנות לשיתוף קבצים ברשת זו."
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr "לבזבז רוחב פס עם הורדות או שידורים מיותרים"
-
-msgid "whitelisted"
-msgstr ""
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "ע\"י הסכמתך לחוקים האלו הנך יכול להשתמש ברשת זו בשביל"
-
-#~ msgid "hour(s). After this time you need to accept these rules again."
-#~ msgstr "שעה(ות). לאחר זמן זה תצטרך לקבל את החוקים האלו שוב."
-
-#~ msgid "the owner of this access point."
-#~ msgstr "הבעלים של נקודת גישה זו."
diff --git a/po/he/statistics.po b/po/he/statistics.po
deleted file mode 100644
index 6ad7475..0000000
--- a/po/he/statistics.po
+++ /dev/null
@@ -1,598 +0,0 @@
-#  statistics.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/statistics.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 04:59+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr "הוסף פקודה לקריאת נתונים"
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/he/tinyproxy.po b/po/he/tinyproxy.po
deleted file mode 100644
index 5c4dddd..0000000
--- a/po/he/tinyproxy.po
+++ /dev/null
@@ -1,255 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/he/transmission.po b/po/he/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/he/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/he/upnp.po b/po/he/upnp.po
deleted file mode 100644
index 9f717c8..0000000
--- a/po/he/upnp.po
+++ /dev/null
@@ -1,144 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/he/ushare.po b/po/he/ushare.po
deleted file mode 100644
index 4858a9a..0000000
--- a/po/he/ushare.po
+++ /dev/null
@@ -1,52 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-06-24 18:47+0200\n"
-"Last-Translator: GiladL <gl1000007@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Content directories"
-msgstr "ספריות תוכן"
-
-# האם לכתוב טלנט באנגלית (telenet) או בתעתיק עברי (טלנט)?
-msgid "Disable telnet console"
-msgstr "השבת קונסולת telnet"
-
-msgid "Disable webinterface"
-msgstr "השבת מנשק רשת"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "אפשרויות"
-
-msgid "Servername"
-msgstr "שם שרת"
-
-msgid "Settings"
-msgstr "הגדרות"
-
-msgid "Username"
-msgstr ""
-
-# זה שם של תוכנה ולא צריך לתרגם אותו
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/he/uvc_streamer.po b/po/he/uvc_streamer.po
deleted file mode 100644
index 6728905..0000000
--- a/po/he/uvc_streamer.po
+++ /dev/null
@@ -1,45 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 03:50+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "פריימים לשניה"
-
-# אפשר גם אבחנה
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "רזולוציה"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "הגדרות"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "שידור באמצעות מצלמת רשת"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-#, fuzzy
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"הגדר את מצלמת הרשת התואמת Linux-UVC שלך. הפנה את הדפדפן שלך לכתובת כמו <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>."
diff --git a/po/he/vnstat.po b/po/he/vnstat.po
deleted file mode 100644
index f0ef3a7..0000000
--- a/po/he/vnstat.po
+++ /dev/null
@@ -1,58 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/he/voice_core.po b/po/he/voice_core.po
deleted file mode 100644
index 74440e3..0000000
--- a/po/he/voice_core.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-10 03:44+0200\n"
-"Last-Translator: Snoof <sagim9@gmail.com>\n"
-"Language-Team: none\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "טלפונים"
-
-msgid "Voice"
-msgstr "קול"
-
-# מה בדיוק מתרגמים כאן? אם זה phones אז התרגום הוא טלפונים. אם זה l_v_adminphones אז זה מונח טכני וצריך להשאיר אותו ללא שינוי
-#~ msgid "l_v_adminphones"
-#~ msgstr "טלפונים"
diff --git a/po/he/voice_diag.po b/po/he/voice_diag.po
deleted file mode 100644
index 3cd1c9f..0000000
--- a/po/he/voice_diag.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/he/watchcat.po b/po/he/watchcat.po
deleted file mode 100644
index ceafe5d..0000000
--- a/po/he/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/he/wol.po b/po/he/wol.po
deleted file mode 100644
index 811596c..0000000
--- a/po/he/wol.po
+++ /dev/null
@@ -1,49 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2010-04-19 00:29+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/he/wshaper.po b/po/he/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/he/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/hu/ahcp.po b/po/hu/ahcp.po
deleted file mode 100644
index 3826a8d..0000000
--- a/po/hu/ahcp.po
+++ /dev/null
@@ -1,115 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-31 15:46+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "AHCP kiszolgáló"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"Az AHCP egy olyan automatikus konfigurációs protokoll IPv6 és kettős IPv6/"
-"IPv4 hálózatokhoz, mely a DHCP és a router dicovery protokoll helyett "
-"használható olyan hálózatokok ahol nehéz vagy lehetetlen beállítani külön "
-"kiszolgálót minden kapcsolati réteg tartományon belül, mint például a mobil "
-"eseti hálózatok."
-
-msgid "Active AHCP Leases"
-msgstr "Aktív AHCP bérletek"
-
-msgid "Address"
-msgstr "Cím"
-
-msgid "Advanced Settings"
-msgstr "Haladó beállítások"
-
-msgid "Age"
-msgstr "Kor"
-
-msgid "Announced DNS servers"
-msgstr "Bejelentett névkiszolgálók"
-
-msgid "Announced NTP servers"
-msgstr "Bejelentett NTP kiszolgálók"
-
-msgid "Announced prefixes"
-msgstr "Bejelentett előtagok"
-
-msgid "Collecting data..."
-msgstr "Adatok összegyűjtése..."
-
-msgid "Forwarder"
-msgstr "Továbbító"
-
-msgid "General Setup"
-msgstr "Általános beállítások"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 és IPv6"
-
-msgid "IPv4 only"
-msgstr "csak IPv4"
-
-msgid "IPv6 only"
-msgstr "csak IPv6"
-
-msgid "Lease directory"
-msgstr "Bérlet könytár"
-
-msgid "Lease validity time"
-msgstr "Bérlet érvényességi ideje"
-
-msgid "Log file"
-msgstr "Napló fájl"
-
-msgid "Multicast address"
-msgstr "Multicast cím"
-
-msgid "Operation mode"
-msgstr "Működési mód"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Protokoll család"
-
-msgid "Served interfaces"
-msgstr "Kiszolgált interfészek"
-
-msgid "Server"
-msgstr "Kiszolgáló"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "A bejelentett IPv4 és IPv6 NTP kiszolgálók részletezése"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "A bejelentett IPv4 és IPv6 névkiszolgálók részletezése"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-"A bejelentett IPv4 és IPv6 hálózati előtagok részletezése CIDR jelölésben"
-
-msgid "The AHCP Service is not running."
-msgstr "Az AHCP szolgáltatás nem fut"
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "Az AHCP szolgáltatás fut, azonosítója:%s."
-
-msgid "There are no active leases."
-msgstr "Nincsenek aktív bérletek."
-
-msgid "Unique ID file"
-msgstr "Egyedi azonosító fájl"
diff --git a/po/hu/asterisk.po b/po/hu/asterisk.po
deleted file mode 100644
index c6a5d81..0000000
--- a/po/hu/asterisk.po
+++ /dev/null
@@ -1,134 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-18 23:18+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Általános Asterisk beállítások"
-
-#~ msgid "AGI directory"
-#~ msgstr "AGI könyvtár"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "A felvett hang fájlok gyorsítótárazása a felvétel alatt"
-
-#~ msgid "Debug Level"
-#~ msgstr "Nyomkövetési szint"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Néhány figyelmeztetés letilása"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Memóriatartalom kiírása összeomláskor"
-
-#~ msgid "High Priority"
-#~ msgstr "Magas prioritás"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Titkosítás inicializálása"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Belső időzítés használata"
-
-#~ msgid "Log directory"
-#~ msgstr "Napló könyvtár"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "A hivások megengedett maximális száma"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "A CPU maximális terhelése új hívások fogadásához"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Konzol színek letiltása"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "A gyorsítótárazott hang fájlok könyvtára"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Csoport futtatása mint"
-
-#~ msgid "The User to run as"
-#~ msgstr "Felhasználó futtatása mint"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Hangposta puffer könyvtár"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Rendszer név használata UniquID előtagként"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Részletes szint"
-
-#~ msgid "Time Zone"
-#~ msgstr "Időzóna"
-
-#~ msgid "include"
-#~ msgstr "tartalmaz"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Átvitel engedélyezése"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Globális változók törlése"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Várakoztatás engedélyezése"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Várakoztatási idő (másodperc)"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Újraindítás módja"
-
-#~ msgid "Parameter"
-#~ msgstr "Paraméter"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Általános IAX beállítások"
-
-#~ msgid "Static"
-#~ msgstr "Statikus"
-
-#~ msgid "Write Protect"
-#~ msgstr "Írásvédelem"
-
-#~ msgid "Modules"
-#~ msgstr "Modulok"
-
-#~ msgid "DTMF mode"
-#~ msgstr "DTMF mód"
-
-#~ msgid "Client Type"
-#~ msgstr "Ügyfél típusa"
-
-#~ msgid "Username"
-#~ msgstr "Felhasználónév"
-
-#~ msgid "Email"
-#~ msgstr "E-mail"
-
-#~ msgid "Display Name"
-#~ msgstr "Megjelenítendő név"
-
-#~ msgid "Password"
-#~ msgstr "Jelszó"
-
-#~ msgid "zone"
-#~ msgstr "zóna"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Hang zóna beállítások"
-
-#~ msgid "Message Format"
-#~ msgstr "Üzenet formátuma"
diff --git a/po/hu/base.po b/po/hu/base.po
deleted file mode 100644
index 2835cf7..0000000
--- a/po/hu/base.po
+++ /dev/null
@@ -1,3130 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-24 19:26+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d perces ablak, %d másodperces intervallum)"
-
-msgid "(%s available)"
-msgstr "(%s elérhető)"
-
-msgid "(empty)"
-msgstr "(üres)"
-
-msgid "(no interfaces attached)"
-msgstr "(nincs csatalkoztatott interfész)"
-
-msgid "-- Additional Field --"
-msgstr "-- További mező --"
-
-msgid "-- Please choose --"
-msgstr "-- Kérem válasszon --"
-
-msgid "-- custom --"
-msgstr "-- egyéni --"
-
-msgid "1 Minute Load:"
-msgstr "Terhelés (utolsó 1 perc):"
-
-msgid "15 Minute Load:"
-msgstr "Terhelés (utolsó 15 perc):"
-
-msgid "40MHz 2nd channel above"
-msgstr "40 MHz, második csatorna felette"
-
-msgid "40MHz 2nd channel below"
-msgstr "40 MHz, második csatorna alatta"
-
-msgid "5 Minute Load:"
-msgstr "Terhelés (utolsó 5 perc):"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> lekérdezési port"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> szerver port"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"<abbr title=\"Domain Name System\">DNS</abbr> szerverek a resolv fájl "
-"sorrendjében"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-cím"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-útválasztó"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-cím, vagy hálózat "
-"(CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-útválasztó"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> konfiguráció"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Név"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-cím"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> bérlés"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> csomagméret"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">Max.</abbr> párhuzamos lekérdezés"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "AR Támogatás"
-
-msgid "ARP retry threshold"
-msgstr "ARP újrapróbálkozási küszöbérték"
-
-msgid "ATM Bridges"
-msgstr "ATM Hidak"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "ATM Virtuális Csatorna Azonosító (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "ATM Virtuális Út Azonosító (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"Az ATM hidak az AAL5-be ágyazott ethernet kapcsolatokat mint virtuális Linux "
-"hálózati interfész mutatják, mely így DHCP-vel vagy PPP-vel összekapcsolva "
-"használható a szolgáltatói hálózatba történő betárcsázáshoz."
-
-msgid "ATM device number"
-msgstr "ATM eszközszám"
-
-msgid "Accept router advertisements"
-msgstr "Router hirdetések elfogadása"
-
-msgid "Access Concentrator"
-msgstr "Elérési központ"
-
-msgid "Access Point"
-msgstr "Hozzáférési pont"
-
-msgid "Action"
-msgstr "Művelet"
-
-msgid "Actions"
-msgstr "Műveletek"
-
-msgid "Activate this network"
-msgstr "Hálózat aktiválása"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Aktív <abbr title=\"Internet Protocol Version 4\">IPv4</abbr> útvonalak"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Aktív <abbr title=\"Internet Protocol Version 6\">IPv6</abbr> útvonalak"
-
-msgid "Active Connections"
-msgstr "Aktív kapcsolatok"
-
-msgid "Active DHCP Leases"
-msgstr "Aktív DHCP bérletek"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Aktív DHCPv6 bérletek"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Hozzáadás"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-"Helyi tartomány utótag hozzáadása a hosts fájlokból kiszolgált nevekhez"
-
-msgid "Add new interface..."
-msgstr "Új interfész hozzáadása..."
-
-msgid "Additional Hosts files"
-msgstr "További 'hosts' fájlok"
-
-msgid "Address"
-msgstr "Cím"
-
-msgid "Address to access local relay bridge"
-msgstr "Helyi közvetítő híd elérési címe"
-
-msgid "Administration"
-msgstr "Adminisztráció"
-
-msgid "Advanced Settings"
-msgstr "Haladó beállítások"
-
-msgid "Advertise IPv6 on network"
-msgstr "IPv6 hirdetése a hálózaton"
-
-msgid "Advertised network ID"
-msgstr "Hirdetett hálózati azonosító"
-
-msgid "Alert"
-msgstr "Riasztás"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"<abbr title=\"Secure Shell\">SSH</abbr> jelszó hitelesítés engedélyezése"
-
-msgid "Allow all except listed"
-msgstr "Összes engedélyezése a felsoroltakon kívül"
-
-msgid "Allow listed only"
-msgstr "Csak a felsoroltak engedélyezése"
-
-msgid "Allow localhost"
-msgstr "Lolcalhost engedélyezése"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Távoli hostok csatlakozásának engedélyezése a helyi SSH továbbított "
-"portokhoz."
-
-msgid "Allow root logins with password"
-msgstr "root jelszavas bejelentkezésének engedélyezése"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Engedélyezi a <em>root</em> felhasználó jelszavas bejelentkezését"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"A 127.0.0.0/8-as tartományba eső DNS válaszok engedélyezése (pl. RBL "
-"szervizek)"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Engedélyezett tartomány 1-től 65535-ig"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-"40 MHz csatornaszélesség használata akkor is, ha a másodlagos csatorna "
-"átfedésben van. Ezen opció használata nem felel meg az IEE 902.11n-2009 "
-"szabványnak!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Amennyiben ezt jelöletlenül hagyja, egy további hálózat jön létre"
-
-msgid "Antenna 1"
-msgstr "1-es antenna"
-
-msgid "Antenna 2"
-msgstr "2-es antenna"
-
-msgid "Antenna Configuration"
-msgstr "Antenna beállítások"
-
-msgid "Any zone"
-msgstr "Bármelyik zóna"
-
-msgid "Apply"
-msgstr "Alkalmaz"
-
-msgid "Applying changes"
-msgstr "Módosítások alkalmazása"
-
-msgid "Assign interfaces..."
-msgstr "Interfészek összekapcsolása..."
-
-msgid "Associated Stations"
-msgstr "Kapcsolódó kliensek"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s vezeték-nélküli vezérlő"
-
-msgid "Authentication"
-msgstr "Hitelesítés"
-
-msgid "Authoritative"
-msgstr "Hiteles"
-
-msgid "Authorization Required"
-msgstr "Hitelesítés szükséges"
-
-msgid "Auto Refresh"
-msgstr "Automatikus frissítés"
-
-msgid "Available"
-msgstr "Elérhető"
-
-msgid "Available packages"
-msgstr "Elérhető csomagok"
-
-msgid "Average:"
-msgstr "Átlag:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Vissza"
-
-msgid "Back to Overview"
-msgstr "Vissza az áttekintéshez"
-
-msgid "Back to configuration"
-msgstr "Vissza a beállításokhoz"
-
-msgid "Back to overview"
-msgstr "Vissza az áttekintéshez"
-
-msgid "Back to scan results"
-msgstr "Vissza a felderítési eredményekhez"
-
-msgid "Background Scan"
-msgstr "Felderítés a háttérben"
-
-msgid "Backup / Flash Firmware"
-msgstr "Mentés / Firmware frissítés"
-
-msgid "Backup / Restore"
-msgstr "Mentés / Visszaállítás"
-
-msgid "Backup file list"
-msgstr "Mentési fájl lista"
-
-msgid "Bad address specified!"
-msgstr "Hibás címet adott meg!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Alább található a biztonsági mentésbe kerülő fájlok listája. A lista az opkg "
-"által megjelölt módosított konfigurációs fájlokból, fontos alapvető "
-"fájlokból valamint a felhasználó által megadott mintáknak megfelelő "
-"fájlokból áll."
-
-msgid "Bitrate"
-msgstr "Bitráta"
-
-msgid "Bogus NX Domain Override"
-msgstr "Hamis NX tartomány felülbírálása"
-
-msgid "Bridge"
-msgstr "Híd"
-
-msgid "Bridge interfaces"
-msgstr "Híd interfészek"
-
-msgid "Bridge unit number"
-msgstr "Híd eszközszám"
-
-msgid "Bring up on boot"
-msgstr "Hozza fel a rendszer indításakor"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Broadcom 802.11%s vezeték-nélküli vezérlő"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Broadcom BCM%04x 802.11 vezeték-nélküli vezérlő"
-
-msgid "Buffered"
-msgstr "Átmeneti tárban van"
-
-msgid "Buttons"
-msgstr "Gombok"
-
-msgid "CPU"
-msgstr "Processzor"
-
-msgid "CPU usage (%)"
-msgstr "Processzor használat (%)"
-
-msgid "Cached"
-msgstr "Gyorsítótárban van"
-
-msgid "Cancel"
-msgstr "Mégsem"
-
-msgid "Chain"
-msgstr "Lánc"
-
-msgid "Changes"
-msgstr "Módosítások"
-
-msgid "Changes applied."
-msgstr "A módosítások alkalmazva."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-"Itt módosíthatja az eszköz eléréséhez szükséges adminisztrátori jelszót"
-
-msgid "Channel"
-msgstr "Csatorna"
-
-msgid "Check"
-msgstr "Ellenőrzés"
-
-msgid "Checksum"
-msgstr "Ellenőrző összeg"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Válassza ki a tűzfal zónát amit hozzá akar rendelni ehhez az interfészhez. "
-"Válassza a <em>nincs megadva</em> elemet az interfésznek a hozzárendelt "
-"zónából történő eltávolításához, vagy töltse ki az <em>új</em> mezőt új zóna "
-"megadásához és csatlakoztassa az interfészt ahhoz."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Válassza ki azokat a hálózatokat, amelyeket csatlakoztatni akar ehhez a "
-"vezetéknélküli interfészhez, vagy töltse ki az <em>új</em> mezőt egy új "
-"hálózat definiálásához."
-
-msgid "Cipher"
-msgstr "Titkosító"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Kattintson az \"Archívum készítése\" gombra a jelenlegi konfiguráció tar "
-"archívumként történő letöltéséhez. A firmware kezdeti állapotának "
-"visszaállításához kattintson a \"Visszaállítás végrehajtása\" gombra (csak "
-"squashfs image-ek esetén lehetséges)."
-
-msgid "Client"
-msgstr "Ügyfél"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "DHCP kérés során küldendő kliens azonosító"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Inaktív kapcsolatok bezárása a megadott másodpercek után, használjon 0-t "
-"állandó kapcsolathoz"
-
-msgid "Close list..."
-msgstr "Lista bezárása..."
-
-msgid "Collecting data..."
-msgstr "Adatok összegyűjtése..."
-
-msgid "Command"
-msgstr "Parancs"
-
-msgid "Common Configuration"
-msgstr "Álatános beállítás"
-
-msgid "Compression"
-msgstr "Tömörítés"
-
-msgid "Configuration"
-msgstr "Beállítás"
-
-msgid "Configuration applied."
-msgstr "Beállítások alkalmazva."
-
-msgid "Configuration files will be kept."
-msgstr "A konfigurációs fájlok megmaradnak."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Beállítja ezt a csatlakozási pontot block-extroot részére mint overlay tároló"
-
-msgid "Confirmation"
-msgstr "Megerősítés"
-
-msgid "Connect"
-msgstr "Kapcsolódás"
-
-msgid "Connected"
-msgstr "Kapcsolódva"
-
-msgid "Connection Limit"
-msgstr "Kapcsolati korlát"
-
-msgid "Connections"
-msgstr "Kapcsolatok"
-
-msgid "Country"
-msgstr "Ország"
-
-msgid "Country Code"
-msgstr "Országkód"
-
-msgid "Cover the following interface"
-msgstr "A következő interfészt tartalmazza"
-
-msgid "Cover the following interfaces"
-msgstr "A következő interfészeket tartalmazza"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Tűzfal zóna készítés / hozzárendelés"
-
-msgid "Create Interface"
-msgstr "Új interfész"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Híd létrehozása több interfész között"
-
-msgid "Critical"
-msgstr "Kritikus"
-
-msgid "Cron Log Level"
-msgstr "Cron naplózási szint"
-
-msgid "Custom Interface"
-msgstr "Egyéni interfész"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Az eszköz <abbr title=\"Light Emitting Diode\">LED</abbr>-jei működésének "
-"testreszabása."
-
-msgid "DHCP Leases"
-msgstr "DHCP bérletek"
-
-msgid "DHCP Server"
-msgstr "DHCP kiszolgáló"
-
-msgid "DHCP and DNS"
-msgstr "DHCP és DNS"
-
-msgid "DHCP client"
-msgstr "DHCP ügyfél"
-
-msgid "DHCP-Options"
-msgstr "DHCP beállítások"
-
-msgid "DHCPv6 Leases"
-msgstr "DHCPv6 bérletek"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "DNS továbbítások"
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr "Hibakeresés"
-
-msgid "Default %d"
-msgstr "Alapértelmezés %d"
-
-msgid "Default gateway"
-msgstr "Alapértelmezett átjáró"
-
-msgid "Default state"
-msgstr "Alapértelmezett állapot"
-
-msgid "Define a name for this network."
-msgstr "Adja meg a hálózat nevét."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Adjon meg további DHCP opciókat, például \"<code>6,192.168.2.1,192.168.2.2</"
-"code>\", mely különböző DNS kiszolgálókat hirdet az ügyfelek részére."
-
-msgid "Delete"
-msgstr "Törlés"
-
-msgid "Delete this interface"
-msgstr "Interfész törlése"
-
-msgid "Delete this network"
-msgstr "Hálózat törlése"
-
-msgid "Description"
-msgstr "Leírás"
-
-msgid "Design"
-msgstr "Megjelenés"
-
-msgid "Destination"
-msgstr "Cél"
-
-msgid "Device"
-msgstr "Eszköz"
-
-msgid "Device Configuration"
-msgstr "Eszköz beállítások"
-
-msgid "Diagnostics"
-msgstr "Diagnosztika"
-
-msgid "Directory"
-msgstr "Könyvtár"
-
-msgid "Disable"
-msgstr "Letiltás"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> tiltása ezen "
-"az interfészen."
-
-msgid "Disable DNS setup"
-msgstr "DNS beállítás letiltása"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Hardveres beacon időzítő letiltása"
-
-msgid "Disabled"
-msgstr "Letiltva"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Beérkező RFC1918 DHCP válaszok elvetése. "
-
-msgid "Displaying only packages containing"
-msgstr "Csak azon csomagok megjelenítése, amelyek tartalmazzák"
-
-msgid "Distance Optimization"
-msgstr "Távolság optimalizáció"
-
-msgid "Distance to farthest network member in meters."
-msgstr "A hálózat legtávolabbi tagjának távolsága méterben."
-
-msgid "Diversity"
-msgstr "Diverzitás"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"A Dnsmasq egy kombinált <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-kiszolgáló és  <abbr title=\"Domain Name System\">DNS</abbr>-"
-"továbbító <abbr title=\"Network Address Translation\">NAT</abbr> tűzfalak "
-"számára"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-"Ne gyorsítótárazza a negatív válaszokat, pl. nem létező domain-ok esetén"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Ne továbbítsa a publikus név szerverek által nem megválaszolható kéréseket"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Ne továbbítson fordított keresési kéréseket a helyi hálózathoz"
-
-msgid "Do not send probe responses"
-msgstr "Ne válaszoljon a szondázásra"
-
-msgid "Domain required"
-msgstr "Tartomány szükséges"
-
-msgid "Domain whitelist"
-msgstr "Tartomány fehérlista"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Ne továbbítsa a <abbr title=\"Domain Name System\">DNS</abbr>-név nélküli "
-"<abbr title=\"Domain Name System\">DNS</abbr>-kéréseket "
-
-msgid "Download and install package"
-msgstr "Csomag letöltése és telepítése"
-
-msgid "Download backup"
-msgstr "Biztonsági mentés letöltése"
-
-msgid "Dropbear Instance"
-msgstr "Dropbear példány"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"A Dropbear a hálózaton <abbr title=\"Secure Shell\">SSH</abbr> hozzáférést "
-"tesz lehetővé, valamint integrált <abbr title=\"Secure Copy\">SCP</abbr> "
-"szolgáltatást nyújt."
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Dinamikus <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "Dinamikus alagút"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Az ügyfelek számára kiosztott DHCP címek dinamikus lefoglalása. Letiltása "
-"esetén csak a statikus DHCP bérlettel rendelkező kliensek lesznek "
-"kiszolgálva."
-
-msgid "EAP-Method"
-msgstr "EAP metódus"
-
-msgid "Edit"
-msgstr "Szerkesztés"
-
-msgid "Edit this interface"
-msgstr "Interfész szerkesztése"
-
-msgid "Edit this network"
-msgstr "Hálózat szerkesztése"
-
-msgid "Emergency"
-msgstr "Vészhelyzet"
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "<abbr title=\"Spanning Tree Protocol\">STP</abbr> engedélyezése"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "HE.net dinamikus végpont frissítésének engedélyezése"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "IPv6 egyeztetés engedélyezése a PPP linken"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Óriás keretek átengedésének engedélyezése"
-
-msgid "Enable NTP client"
-msgstr "NTP-kliens engedélyezése"
-
-msgid "Enable TFTP server"
-msgstr "TFTP kiszolgáló engedélyezése"
-
-msgid "Enable VLAN functionality"
-msgstr "VLAN funkció engedélyezése"
-
-msgid "Enable learning and aging"
-msgstr "Tanulás és aging engedélyezése"
-
-msgid "Enable this mount"
-msgstr "A csatolás engedélyezése"
-
-msgid "Enable this swap"
-msgstr "A lapozó terület engedélyezése"
-
-msgid "Enable/Disable"
-msgstr "Engedélyezés/Letiltás"
-
-msgid "Enabled"
-msgstr "Engedélyezve"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "A Spanning Tree prokoll engedélyezése erre a hídra"
-
-msgid "Encapsulation mode"
-msgstr "Beágyazási mód"
-
-msgid "Encryption"
-msgstr "Titkosítás"
-
-msgid "Erasing..."
-msgstr "Törlés..."
-
-msgid "Error"
-msgstr "Hiba"
-
-msgid "Ethernet Adapter"
-msgstr "Ethernet adapter"
-
-msgid "Ethernet Switch"
-msgstr "Ethernet switch"
-
-msgid "Expand hosts"
-msgstr "Gépek kibontása"
-
-msgid "Expires"
-msgstr "Lejárat"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr "A bérelt címek lejárati ideje, a minimális érték 2 perc."
-
-msgid "External system log server"
-msgstr "Külső rendszernapló kiszolgáló"
-
-msgid "External system log server port"
-msgstr "Külső rendszernapló kiszolgáló port"
-
-msgid "Fast Frames"
-msgstr "Gyors keretek"
-
-msgid "File"
-msgstr "Fájl"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "A kliensek részére közzétett betöltö kép fájlneve"
-
-msgid "Filesystem"
-msgstr "Fájlrendszer"
-
-msgid "Filter"
-msgstr "Szűrő"
-
-msgid "Filter private"
-msgstr "Privát kérések szűrése"
-
-msgid "Filter useless"
-msgstr "Használhahatlan kérések szűrése"
-
-msgid "Find and join network"
-msgstr "Hálózatok keresése és csatlakozás"
-
-msgid "Find package"
-msgstr "Csomag keresése"
-
-msgid "Finish"
-msgstr "Befejezés"
-
-msgid "Firewall"
-msgstr "Tűzfal"
-
-msgid "Firewall Settings"
-msgstr "Tűzfal Beállítások"
-
-msgid "Firewall Status"
-msgstr "Tűzfal Állapot"
-
-msgid "Firmware Version"
-msgstr "Tűzfal verzió"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Rögzített forrás port a kimenő DNS kérésekhez"
-
-msgid "Flags"
-msgstr "Flag-ek"
-
-msgid "Flash Firmware"
-msgstr "Firmware flash-elés"
-
-msgid "Flash image..."
-msgstr "Flash image..."
-
-msgid "Flash new firmware image"
-msgstr "Új firmware image flash-elése"
-
-msgid "Flash operations"
-msgstr "Flash műveletek"
-
-msgid "Flashing..."
-msgstr "Flash-elés..."
-
-msgid "Force"
-msgstr "Kényszerítés"
-
-msgid "Force 40MHz mode"
-msgstr "40 MHz mód erőltetése"
-
-msgid "Force CCMP (AES)"
-msgstr "CCMP (AES) kényszerítése"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-"DHCP kényszerítése ezen a hálózaton még akkor is ha van másik szerver "
-"észlelve."
-
-msgid "Force TKIP"
-msgstr "TKIP kényszerítése"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "TKIP és CCMP (AES) kényszerítése"
-
-msgid "Forward DHCP traffic"
-msgstr "DHCP forgalom továbbítás"
-
-msgid "Forward broadcast traffic"
-msgstr "Broadcast forgalom továbbítás"
-
-msgid "Forwarding mode"
-msgstr "Továbbítás módja"
-
-msgid "Fragmentation Threshold"
-msgstr "Széttagoltság küszöb"
-
-msgid "Frame Bursting"
-msgstr ""
-
-msgid "Free"
-msgstr "Szabad"
-
-msgid "Free space"
-msgstr "Szabad hely"
-
-msgid "Frequency Hopping"
-msgstr "Frekvencia ugrás"
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr "Csak GPRS"
-
-msgid "Gateway"
-msgstr "Átjáró"
-
-msgid "Gateway ports"
-msgstr "Átjáró portok"
-
-msgid "General Settings"
-msgstr "Általános beállítások"
-
-msgid "General Setup"
-msgstr "Általános beállítások"
-
-msgid "Generate archive"
-msgstr "Archívum készítése"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Általános 802.11%s vezeték-nélküli vezérlő"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "A megadott jelszavak nem egyeznek, a jelszó nem lett megváltoztatva!"
-
-msgid "Go to password configuration..."
-msgstr "Ugrás a jelszó beállításhoz..."
-
-msgid "Go to relevant configuration page"
-msgstr "Ugrás a tárgyhoz tartozó beállításokhoz"
-
-msgid "HE.net password"
-msgstr "HE.net jelszó"
-
-msgid "HE.net user ID"
-msgstr "HE.net felhasználói azonosító"
-
-msgid "HT capabilities"
-msgstr "HT képességek"
-
-msgid "HT mode"
-msgstr "HT mód"
-
-msgid "Handler"
-msgstr "Kezelő"
-
-msgid "Hang Up"
-msgstr "Befejezés"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Itt állíthatja be az eszköz alapvető tulajdonságait, mint például a gépnév "
-"vagy az időzóna."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Nyilvános kulcs alapú SSH azonosításhoz itt adhat meg nyilvános SSH "
-"kulcsokat (soronként egyet)."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr> elrejtése"
-
-msgid "Host entries"
-msgstr "Host bejegyzések"
-
-msgid "Host expiry timeout"
-msgstr "Host lejárati idő"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> vagy hálózat"
-
-msgid "Hostname"
-msgstr "Gépnév"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "DHCP kérés során küldendő gépnév"
-
-msgid "Hostnames"
-msgstr "Gépnevek"
-
-msgid "IP address"
-msgstr "IP cím"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "IPv4 tűzfal"
-
-msgid "IPv4 WAN Status"
-msgstr "IPv4 WAN állapot"
-
-msgid "IPv4 address"
-msgstr "IPv4 cím"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 és IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "IPv4 broadcast"
-
-msgid "IPv4 gateway"
-msgstr "IPv4 átjáró"
-
-msgid "IPv4 netmask"
-msgstr "IPv4 hálózati maszk"
-
-msgid "IPv4 only"
-msgstr "csak IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "IPv4 prefix hossza"
-
-msgid "IPv4-Address"
-msgstr "IPv4-cím"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "IPv6 tűzfal"
-
-msgid "IPv6 WAN Status"
-msgstr "IPv6 WAN állapot"
-
-msgid "IPv6 address"
-msgstr "IPv6 cím"
-
-msgid "IPv6 gateway"
-msgstr "IPv6 átjáró"
-
-msgid "IPv6 only"
-msgstr "csak IPv6"
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr "IPv6 prefix hossz"
-
-msgid "IPv6-Address"
-msgstr "IPv6-cím"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6 IPv4-ben (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Identitás"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Megadás esetén az eszköz csomópont helyett UUID alapján történő csatolása"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Megadás esetén az eszköz csomópont helyett címke alapján történő csatolása"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Ha nincs kiválasztva, akkor nincs alapértelmezett útvonal beállítva"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-"Ha nincs kiválasztva, akkor a hirdetett DNS kiszolgáló címeket nem veszi "
-"figyelembe"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Ha a fizikai memória túl kevés a nem használt adatok ideiglenesen áttehetők "
-"egy swap-eszközre mely így nagyobb mennyiségű használható <abbr title="
-"\"Random Access Memory\">RAM</abbr>-ot eredményez. Az adatok áttétele egy "
-"nagyon lassú folyamat mivel a swap-eszköz nem érhető el akkora sebességgel "
-"mint a <abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "A hosts fájlok figyelmen kívül hagyása"
-
-msgid "Ignore interface"
-msgstr "Interfész figyelmen kívül hagyása"
-
-msgid "Ignore resolve file"
-msgstr "A resolve fájl figyelmen kívül hagyása"
-
-msgid "Image"
-msgstr "Image"
-
-msgid "In"
-msgstr "Be"
-
-msgid "Inactivity timeout"
-msgstr "Inaktivitási időtúllépés"
-
-msgid "Inbound:"
-msgstr "Bejövő"
-
-msgid "Info"
-msgstr "Információk"
-
-msgid "Initscript"
-msgstr "Indítási állomány"
-
-msgid "Initscripts"
-msgstr "Indítási állományok"
-
-msgid "Install"
-msgstr "Telepítés"
-
-msgid "Install package %q"
-msgstr "%q csomag telepítése"
-
-msgid "Install protocol extensions..."
-msgstr "Protokoll kiterjesztések telepítése..."
-
-msgid "Installed packages"
-msgstr "Telepített csomagok"
-
-msgid "Interface"
-msgstr "Interfész"
-
-msgid "Interface Configuration"
-msgstr "Interfész beállítások"
-
-msgid "Interface Overview"
-msgstr "Interfész áttekintés"
-
-msgid "Interface is reconnecting..."
-msgstr "Interfész újracsatlakoztatása..."
-
-msgid "Interface is shutting down..."
-msgstr "Interfész leállítása..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Az interfész nincs jelen, vagy még nincs csatlakoztatva."
-
-msgid "Interface reconnected"
-msgstr "Interfész újracsatlakoztatva"
-
-msgid "Interface shut down"
-msgstr "Interfész leállítás"
-
-msgid "Interfaces"
-msgstr "Interfészek"
-
-msgid "Internal Server Error"
-msgstr "Belső szerverhiba"
-
-msgid "Invalid"
-msgstr "Érvénytelen"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-"A megadott VLAN azonosító érvénytelen. Az azonosítónak %d és %d közé kell "
-"esnie."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-"A megadott VLAN azonosító érvénytelen! Minden VLAN-hoz egyedi azonosító kell."
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Érvénytelen felhasználói név és/vagy jelszó! Kérem próbálja újra!"
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Úgy tűnik, hogy a flash-elendő kép-file nem fér el a Flash-memóriába. Kérem "
-"ellenőrizze a kép fájlt!"
-
-msgid "Java Script required!"
-msgstr "Javascript szükséges!"
-
-msgid "Join Network"
-msgstr "Csatlakozás a hálózathoz"
-
-msgid "Join Network: Settings"
-msgstr "Csatlakozás a hálózathoz: Beállítások"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Csatlakozás a hálózathoz: vezetéknélküli hálózatok keresése"
-
-msgid "Keep settings"
-msgstr "Beállítások megtartása"
-
-msgid "Kernel Log"
-msgstr "Kernel napló"
-
-msgid "Kernel Version"
-msgstr "Kernel verzió"
-
-msgid "Key"
-msgstr "Kulcs"
-
-msgid "Key #%d"
-msgstr "Kulcs #%d"
-
-msgid "Kill"
-msgstr "Kilövés"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr "LCP echo hibaküszöb"
-
-msgid "LCP echo interval"
-msgstr "LCP Echo időtartam"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Címke"
-
-msgid "Language"
-msgstr "Nyelv"
-
-msgid "Language and Style"
-msgstr "Nyelv és megjelenés"
-
-msgid "Lease validity time"
-msgstr "Bérlet érvényességi ideje"
-
-msgid "Leasefile"
-msgstr "Bérlet fájl"
-
-msgid "Leasetime"
-msgstr "Bérlet időtartama"
-
-msgid "Leasetime remaining"
-msgstr "A bérletből hátralévő idő"
-
-msgid "Leave empty to autodetect"
-msgstr "Automatikus észleléshez hagyja üresen"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "A jelenlegi WAN cím használatához hagyja üresen"
-
-msgid "Legend:"
-msgstr "Jelmagyarázat:"
-
-msgid "Limit"
-msgstr "Korlát"
-
-msgid "Link On"
-msgstr "Kapcsolat létrehozva"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"<abbr title=\"Domain Name System\">DNS</abbr> szerverek listája, ahová a "
-"kérések továbbításra kerülnek"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Domain-ok listája, melyeknél az RFC1918 válaszok megengedettek"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "A hamis NX tartomány eredményeket szolgáltató gépek listája"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-"Csak a megadott interfészen hallgat, vagy az összesen, amennyiben nem adja "
-"meg"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Szerver port a beérkező DNS kérések számára"
-
-msgid "Load"
-msgstr "Terhelés"
-
-msgid "Load Average"
-msgstr "Átlagos terhelés"
-
-msgid "Loading"
-msgstr "Betöltés"
-
-msgid "Local IPv4 address"
-msgstr "Helyi IPv4 cím"
-
-msgid "Local IPv6 address"
-msgstr "Helyi IPv6 cím"
-
-msgid "Local Startup"
-msgstr "Helyi indítóscript"
-
-msgid "Local Time"
-msgstr "Helyi idő"
-
-msgid "Local domain"
-msgstr "Helyi tartomány"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Helyi tartomány meghatározása. Az ezzel a tartománnyal egyező nevek soha "
-"nincsenek továbbítva és csak DHCP-n vagy host fájlok által kerülnek "
-"feloldásra"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"A helyi tartomány utótag csatolása a DHCP nevekhez és hosts fájl "
-"bejegyzésekhez"
-
-msgid "Local server"
-msgstr "Helyi kiszolgáló"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr ""
-
-msgid "Locked to channel %d used by %s"
-msgstr "Zárolt a %d csatornára az %s által."
-
-msgid "Log output level"
-msgstr "Napló kimeneti szintje"
-
-msgid "Log queries"
-msgstr "Kérések naplózása"
-
-msgid "Logging"
-msgstr "Naplózás"
-
-msgid "Login"
-msgstr "Bejelentkezés"
-
-msgid "Logout"
-msgstr "Kijelentkezés"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "A legalacsonyabb bérleti címnek az interfész címétől való távolsága"
-
-msgid "MAC-Address"
-msgstr "MAC-cím"
-
-msgid "MAC-Address Filter"
-msgstr "MAC-cím szűrő"
-
-msgid "MAC-Filter"
-msgstr "MAC-szűrő"
-
-msgid "MAC-List"
-msgstr "MAC-lista"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Maximális sebesség"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Aktív DHCP bérletek maximális száma"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Párhuzamos DNS kérések maximális száma"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "EDNS.0 UDP csomagok maximális mérete"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Maximális várakozási idő a modem kész állapotára (másodpercben)"
-
-msgid "Maximum hold time"
-msgstr "Maximális tartási idő"
-
-msgid "Maximum number of leased addresses."
-msgstr "DHCP címek maximális száma"
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memória"
-
-msgid "Memory usage (%)"
-msgstr "Memória használat (%)"
-
-msgid "Metric"
-msgstr "Metrika"
-
-msgid "Minimum Rate"
-msgstr "Minimális sebesség"
-
-msgid "Minimum hold time"
-msgstr "Minimális tartási idő"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Hiányzó protokoll kiterjesztés a %q progokoll számára"
-
-msgid "Mode"
-msgstr "Mód"
-
-msgid "Modem device"
-msgstr "Modemeszköz"
-
-msgid "Modem init timeout"
-msgstr "Modem inicializálás időtúllépés"
-
-msgid "Monitor"
-msgstr "Ellenőrzés"
-
-msgid "Mount Entry"
-msgstr "Csatolási bejegyzés"
-
-msgid "Mount Point"
-msgstr "Csatolási pont"
-
-msgid "Mount Points"
-msgstr "Csatolási pontok"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Csatolási pontok - Csatolási bejegyzés"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Csatolási pontok - Lapozóterület bejegyzés"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"A csatolási pontok határozzák meg, hogy egy memória eszköz hová lesz "
-"csatlakoztatva a fájlendszeren belül "
-
-msgid "Mount options"
-msgstr "Csatolási beállítások"
-
-msgid "Mount point"
-msgstr "Csatolási pont"
-
-msgid "Mounted file systems"
-msgstr "Csatolt fájlrendszerek"
-
-msgid "Move down"
-msgstr "Mozgatás lefelé"
-
-msgid "Move up"
-msgstr "Mozgatás felfelé"
-
-msgid "Multicast Rate"
-msgstr "Multicast sebesség"
-
-msgid "Multicast address"
-msgstr "Multicast cím"
-
-msgid "NAS ID"
-msgstr "NAS azonosító"
-
-msgid "NTP server candidates"
-msgstr "Kijelölt NTP kiszolgálók"
-
-msgid "Name"
-msgstr "Név"
-
-msgid "Name of the new interface"
-msgstr "Az új interfész neve"
-
-msgid "Name of the new network"
-msgstr "Az új hálózat neve"
-
-msgid "Navigation"
-msgstr "Navigáció"
-
-msgid "Netmask"
-msgstr "Hálózati maszk"
-
-msgid "Network"
-msgstr "Hálózat"
-
-msgid "Network Utilities"
-msgstr "Hálózati eszközök"
-
-msgid "Network boot image"
-msgstr "Hálózati rendszertöltő lemezkép"
-
-msgid "Network without interfaces."
-msgstr "Interfészhez nem rendelt hálózat"
-
-msgid "Next »"
-msgstr "Következő »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Ehhez az interfészhez nincs DHCP kiszolgáló beállítva"
-
-msgid "No chains in this table"
-msgstr "Ez a tábla nem tartalmaz láncokat."
-
-msgid "No files found"
-msgstr "Nem találhatók fájlok"
-
-msgid "No information available"
-msgstr "Nincs elérhető információ"
-
-msgid "No negative cache"
-msgstr "Nincs negatív gyorsítótár"
-
-msgid "No network configured on this device"
-msgstr "Ehhez az eszközhöz nincs hálózat beállítva"
-
-msgid "No network name specified"
-msgstr "Nincs megadva hálózatnév"
-
-msgid "No package lists available"
-msgstr "Csomaglisták nem állnak rendelkezésre"
-
-msgid "No password set!"
-msgstr "Nincs jelszó!"
-
-msgid "No rules in this chain"
-msgstr "Ez a lánc nem tartalmaz szabályokat"
-
-msgid "No zone assigned"
-msgstr "Nincs hozzárendelt zóna"
-
-msgid "Noise"
-msgstr "Zaj"
-
-msgid "Noise:"
-msgstr "Zaj:"
-
-msgid "None"
-msgstr "Nincs"
-
-msgid "Normal"
-msgstr "Normál"
-
-msgid "Not Found"
-msgstr "Nem található"
-
-msgid "Not associated"
-msgstr "Nincs hozzárendelve"
-
-msgid "Not connected"
-msgstr "Nincs kapcsolódva"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Megjegyzés: konfigurációs fájlok törölve lesznek."
-
-msgid "Notice"
-msgstr "Megjegyzés"
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "OPKG-Beállítások"
-
-msgid "Off-State Delay"
-msgstr "Kikapcsolt állapot késleltetés"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Ezen az oldalon a hálózati interfészeket állíthatja be. Több interfész "
-"között híd hozható létre a \"híd interfész\" mező bejelölésével és több "
-"hálózati interfész nevének szóközzel történő elválasztásával. Lehetőség van "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> jelölés "
-"<samp>INTERFÉSZ.VLANSZÁM</samp> használatára is, pl. <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Bekapcsolt állapot késleltetés"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Egy vagy több mező érvénytelen adatot tartalmaz!"
-
-msgid "One or more required fields have no value!"
-msgstr "Egy vagy több kötelezően kitöltendő mező üres!"
-
-msgid "Open list..."
-msgstr "Lista megnyitása..."
-
-msgid "Option changed"
-msgstr "Beállítás módosítva"
-
-msgid "Option removed"
-msgstr "Beállítás eltávolítva"
-
-msgid "Options"
-msgstr "Lehetőségek"
-
-msgid "Other:"
-msgstr "Egyéb:"
-
-msgid "Out"
-msgstr "Ki"
-
-msgid "Outbound:"
-msgstr "Kimenő:"
-
-msgid "Outdoor Channels"
-msgstr "Kültéri csatornák"
-
-msgid "Override MAC address"
-msgstr "MAC cím felülbírálása"
-
-msgid "Override MTU"
-msgstr "MTU felülbíráslás"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Átjáró felülbírálása a DHCP válaszokban"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Az ügyfelek részére küldött hálózati masz felülbírálása. Ez alapesetben a "
-"kiszolgált alhálózat alapján kerül meghatározásra."
-
-msgid "Override the table used for internal routes"
-msgstr "A belső útvonalakhoz használt tábla felülbírálása"
-
-msgid "Overview"
-msgstr "Áttekintés"
-
-msgid "Owner"
-msgstr "Tulajdonos"
-
-msgid "PAP/CHAP password"
-msgstr "PAP/CHAP jelszó"
-
-msgid "PAP/CHAP username"
-msgstr "PAP/CHAP felhasználói név"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "PPPoA beágyazás"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "A libiwinfo csomag szükséges!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "A csomag listák 24 óránál régebbiek"
-
-msgid "Package name"
-msgstr "Csomagnév"
-
-msgid "Packets"
-msgstr "Csomagok"
-
-msgid "Part of zone %q"
-msgstr "A %q zóna része"
-
-msgid "Password"
-msgstr "Jelszó"
-
-msgid "Password authentication"
-msgstr "Jelszó hitelesítés"
-
-msgid "Password of Private Key"
-msgstr "A privát kulcsh jelszava"
-
-msgid "Password successfully changed!"
-msgstr "A jelszó megváltoztatása sikeres!"
-
-msgid "Path to CA-Certificate"
-msgstr "CA tanúsítvány elérési útja"
-
-msgid "Path to Client-Certificate"
-msgstr "Kliens tanúsítvány elérési útja"
-
-msgid "Path to Private Key"
-msgstr "A privát kulcs elérési útja"
-
-msgid "Path to executable which handles the button event"
-msgstr "A gomb eseményeit kezelő végrehajtható állomány elérési útja"
-
-msgid "Peak:"
-msgstr "Csúcs:"
-
-msgid "Perform reboot"
-msgstr "Újraindítás végrehajtása"
-
-msgid "Perform reset"
-msgstr "Visszaállítás végrehajtása"
-
-msgid "Phy Rate:"
-msgstr "Phy sebesség:"
-
-msgid "Physical Settings"
-msgstr "Fizikai beállítások"
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr "csom."
-
-msgid "Please enter your username and password."
-msgstr "Adja meg a felhasználónevét és a jelszavát."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Kérem várjon: az eszköz újraindul..."
-
-msgid "Policy"
-msgstr "Szabály"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr "Port %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "A %d port egyszerre több VLAN-ban is cimkézetlen!"
-
-msgid "Port status:"
-msgstr "Port állapot:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"A peer halottnak tekintése a megadott számú LCP echo hibák után. Használjon "
-"0-t a hibák figyelmen kívül hagyásához."
-
-msgid "Prevents client-to-client communication"
-msgstr "Ügyfél-ügyfél közötti kommunikáció megakadályozása"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Folytatás"
-
-msgid "Processes"
-msgstr "Folyamatok"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Protocol family"
-msgstr "Protokoll család"
-
-msgid "Protocol of the new interface"
-msgstr "Az új interfész protokollja"
-
-msgid "Protocol support is not installed"
-msgstr "Protokoll támogatás nincs telepítve"
-
-msgid "Provide NTP server"
-msgstr "NTP kiszolgáló"
-
-msgid "Provide new network"
-msgstr "Új hálózat nyújtása"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Ál Ad-hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Minőség"
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS küszöbérték"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "RX sebesség"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr "Radius-Hitelesítés-Port"
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr "Radius-Hitelesítés-Kiszolgáló"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Az <code>/etc/ethers</code> fájl olvasása a <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr> kiszolgáló beállításához"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Biztosan törli az interfészt? A törlés nem visszavonható!\n"
-" Lehet, hogy elveszti a hozzáférést az eszközhöz, amennyiben ezen az "
-"interfészen keresztül kapcsolódik."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Biztosan törli ezt a vezetéknélküli hálózatot? A törlés nem visszavonható!\n"
-"Lehet, hogy elveszti a hozzáférést az eszközhöz, amennyiben ezen a hálózaton "
-"keresztül kapcsolódik."
-
-msgid "Really reset all changes?"
-msgstr "Biztos, hogy visszavonja az összes módosítást?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Biztos, hogy leállítja a \"%s\" interfészt?\n"
-" Lehet, hogy elveszti a hozzáférést az eszközhöz, amennyiben ezen az "
-"interfészen keresztül kapcsolódik."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Biztos, hogy leállítja a hálózatot?!\n"
-" Lehet, hogy elveszti a hozzáférést az eszközhöz, amennyiben ezen a "
-"hálózaton keresztül kapcsolódik."
-
-msgid "Really switch protocol?"
-msgstr "Biztos, hogy cserélni szeretné a protokollt?"
-
-msgid "Realtime Connections"
-msgstr "Valósidejű kapcsolatok"
-
-msgid "Realtime Graphs"
-msgstr "Valósidejű grafikonok"
-
-msgid "Realtime Load"
-msgstr "Valósidejű terhelés"
-
-msgid "Realtime Traffic"
-msgstr "Valósidejű forgalom"
-
-msgid "Realtime Wireless"
-msgstr "Valósidejű vezetéknélküli adatok"
-
-msgid "Rebind protection"
-msgstr "Rebind elleni védelem"
-
-msgid "Reboot"
-msgstr "Újraindítás"
-
-msgid "Rebooting..."
-msgstr "Újraindítás..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Újraindítja az eszköz operációs rendszerét"
-
-msgid "Receive"
-msgstr "Fogadás"
-
-msgid "Receiver Antenna"
-msgstr "Vevő antenna"
-
-msgid "Reconnect this interface"
-msgstr "Csatlakoztassa újra az interfészt"
-
-msgid "Reconnecting interface"
-msgstr "Interfész újracsatlakoztatása"
-
-msgid "References"
-msgstr "Hivatkozások"
-
-msgid "Regulatory Domain"
-msgstr "Szabályozó tartomány"
-
-msgid "Relay"
-msgstr "Átjátszás"
-
-msgid "Relay Bridge"
-msgstr "Átjátszó híd"
-
-msgid "Relay between networks"
-msgstr "Átjátszás hálózatok között"
-
-msgid "Relay bridge"
-msgstr "Átjátszó híd"
-
-msgid "Remote IPv4 address"
-msgstr "Távoli IPv4 cím"
-
-msgid "Remove"
-msgstr "Eltávolítás"
-
-msgid "Repeat scan"
-msgstr "Felderítés ismétlése"
-
-msgid "Replace entry"
-msgstr "Bejegyés lecserélése"
-
-msgid "Replace wireless configuration"
-msgstr "Vezetéknélküli beállítások lecserélése"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-"Szükséges bizonyos internetszolgáltatók esetén, pl. Charter 'DOCSIS 3'-al"
-
-msgid "Reset"
-msgstr "Visszaállítás"
-
-msgid "Reset Counters"
-msgstr "Számlálók nullázása"
-
-msgid "Reset to defaults"
-msgstr "Alapértelmezések visszaállítása"
-
-msgid "Resolv and Hosts Files"
-msgstr "Resolv és hosts fájlok"
-
-msgid "Resolve file"
-msgstr "Resolv fájl"
-
-msgid "Restart"
-msgstr "Újraindítás"
-
-msgid "Restart Firewall"
-msgstr "Tűzfal újraindítása"
-
-msgid "Restore backup"
-msgstr "Biztonsági mentés visszaállítása"
-
-msgid "Reveal/hide password"
-msgstr "Jelszó mutatása/elrejtése"
-
-msgid "Revert"
-msgstr "Visszavonás"
-
-msgid "Root"
-msgstr "Gyökérkönyvtár"
-
-msgid "Root directory for files served via TFTP"
-msgstr "TFTP-n keresztül megosztott fájlok gyökérkönyvtára"
-
-msgid "Router Model"
-msgstr "Router modell"
-
-msgid "Router Name"
-msgstr "Router név"
-
-msgid "Router Password"
-msgstr "Router jelszó"
-
-msgid "Routes"
-msgstr "Útvonalak"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Az útvonalak határozzák meg, hogy bizonyos gépek illetve hálózatok melyik "
-"interfészen keresztül érhetők el."
-
-msgid "Rule #"
-msgstr "Szabály #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "Fájlrendszer ellenőrzés futtatása az eszköz csatolása előtt"
-
-msgid "Run filesystem check"
-msgstr "Fájlrendszer ellenőrzés futtatása"
-
-msgid "SSH Access"
-msgstr "SSH hozzáférés"
-
-msgid "SSH-Keys"
-msgstr "SSH kulcsok"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Mentés"
-
-msgid "Save & Apply"
-msgstr "Mentés & Alkalmazás"
-
-msgid "Save &#38; Apply"
-msgstr "Mentés &#38; Alkalmazás"
-
-msgid "Scan"
-msgstr "Felderítés"
-
-msgid "Scheduled Tasks"
-msgstr "Ütemezett feladatok"
-
-msgid "Section added"
-msgstr "Szakasz hozzáadva"
-
-msgid "Section removed"
-msgstr "Szakasz eltávolítva"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Részletekért lásd a 'mount' man oldalát"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"LCP echo kérések küldése a másodpercben megadott időközönként, csak a "
-"hibaküszöbbel együtt van hatása."
-
-msgid "Send router solicitations"
-msgstr "Router kérelmezések küldése"
-
-msgid "Separate Clients"
-msgstr "Kliensek szétválasztása"
-
-msgid "Separate WDS"
-msgstr "WDS szétválasztása"
-
-msgid "Server Settings"
-msgstr "Kiszolgáló beállításai"
-
-msgid "Service Name"
-msgstr "Szolgáltatás neve"
-
-msgid "Service Type"
-msgstr "Szolgáltatás típusa"
-
-msgid "Services"
-msgstr "Szolgáltatások"
-
-msgid "Setup DHCP Server"
-msgstr "DHCP kiszolgáló beállítása"
-
-msgid "Setup Time Synchronization"
-msgstr "Idő szinkronizálás beállítása"
-
-msgid "Show current backup file list"
-msgstr "Mentendő fájlok aktuális listájának megjelenítése"
-
-msgid "Shutdown this interface"
-msgstr "Interfész leállítása"
-
-msgid "Shutdown this network"
-msgstr "Hálózat leállítása"
-
-msgid "Signal"
-msgstr "Jel"
-
-msgid "Signal:"
-msgstr "Jel:"
-
-msgid "Size"
-msgstr "Méret"
-
-msgid "Skip"
-msgstr "Ugrás"
-
-msgid "Skip to content"
-msgstr "Ugrás a tartalomhoz"
-
-msgid "Skip to navigation"
-msgstr "Ugrás a navigációhoz"
-
-msgid "Slot time"
-msgstr "Időrés"
-
-msgid "Software"
-msgstr "Szoftver"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Néhán mező érvénytelen, az értékek nem menthetők!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Sajnálom, a kért objektum nem található."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Sajnálom, a szerver váratlan hibát észlelt."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"Sajnáljuk, a 'sysupgrade' támogatás nem elérhető, az új firmware fájl "
-"telepítését manuálisan kell elvégezni. Az eszközhöz tartozó telepítési "
-"utasításokért keresse fel az OpenWrt wiki-t."
-
-msgid "Sort"
-msgstr "Sorbarendezés"
-
-msgid "Source"
-msgstr "Forrás"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr "Meghatározza a gomb kezelendő állapotát"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Megadja az eszköz csatlakozási könyvtárát."
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Megadja a <em>Dropbear</em> példány portját"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Megadja a maximális sikertelen ARP kérések számát, amik után a host nem "
-"elérhetőnek tekinthető"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-"Megadja a másodpercek számát, amik után a host nem elérhetőnek tekinthető"
-
-msgid "Specify the secret encryption key here."
-msgstr "Itt adja meg a titkosító kulcsot."
-
-msgid "Start"
-msgstr "Indítás"
-
-msgid "Start priority"
-msgstr "Indítás prioritása"
-
-msgid "Startup"
-msgstr "Rendszerindítás"
-
-msgid "Static IPv4 Routes"
-msgstr "Statikus IPv4 útvonalak"
-
-msgid "Static IPv6 Routes"
-msgstr "Statikus IPv6 útvonalak"
-
-msgid "Static Leases"
-msgstr "Statikus bérletek"
-
-msgid "Static Routes"
-msgstr "Statikus útvonalak"
-
-msgid "Static WDS"
-msgstr "Statikus WDS"
-
-msgid "Static address"
-msgstr "Statikus cím"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"A statikus bérletekkel a DHCP kliensekhez fix IP-címet és hostnevet "
-"rendelhet. Olyan nem dinamikus interfész konfigurációk esetén is "
-"szükségesek, ahol a csak a megfelelő bérlettel rendelkező hosztok kerülnek "
-"kiszolgálásra."
-
-msgid "Status"
-msgstr "Állapot"
-
-msgid "Stop"
-msgstr "Leállítás"
-
-msgid "Strict order"
-msgstr "Kötött sorrend"
-
-msgid "Submit"
-msgstr "Elküldés"
-
-msgid "Swap Entry"
-msgstr "Lapozóterület"
-
-msgid "Switch"
-msgstr "Kapcsoló"
-
-msgid "Switch %q"
-msgstr "Kapcsoló %q"
-
-msgid "Switch %q (%s)"
-msgstr "Kapcsoló %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Protokoll csere"
-
-msgid "Sync with browser"
-msgstr "Szinkronizálás a böngészővel"
-
-msgid "Synchronizing..."
-msgstr "Szinkronizálás..."
-
-msgid "System"
-msgstr "Rendszer"
-
-msgid "System Log"
-msgstr "Rendszernapló"
-
-msgid "System Properties"
-msgstr "Rendszer tulajdonságok"
-
-msgid "System log buffer size"
-msgstr "Rendszer napló puffer méret"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "TFTP beállítások"
-
-msgid "TFTP server root"
-msgstr "TFTP szerver gyökér könyvtár"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "TX sebesség"
-
-msgid "Table"
-msgstr "Tábla"
-
-msgid "Target"
-msgstr "Cél"
-
-msgid "Terminate"
-msgstr "Megszakítás"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"Az <em>Eszköz beállítások</em> szakasz a rádió hardver fizikai beállításait, "
-"úgymint csatorna, adóteljesítmény vagy antenna választás teszi lehetővé, "
-"amelyen az összes definiált vezeték nélküli hálózat (ha a rádió hardver "
-"multi-SSID képes) osztozik. A hálózatonkénti beállítások, mint az "
-"titkosítás, mód az <em>Interfész beállítások</em> alá vannak csoportosítva."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"A <em>libiwinfo-lua</em> nincs telepítve. A vezetéknélküli beállítás "
-"működéséhez ezt az összetevőt telepítnei kell."
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"A következő karakterek használhatók: <code>A-Z</code>, <code>a-z</code>, "
-"<code>0-9</code> and <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"A memória vagy partíció eszköz fájlja (<abbr title=\"például\">pl.</abbr> "
-"<code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"A memória formázásához használt fájlrendszer típusa (<abbr title=\"for "
-"example\">pl.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</"
-"abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Az image feltöltve. Alább található a fájl ellenőrző összege és mérete, "
-"hasonlítsa össze az eredeti fájllal a feltöltött adatok sértetlenségének "
-"ellenőrzéséhez.<br />Kattintson az alábbi \"Folytatás\" gombra a flash-elési "
-"eljárás elindításához."
-
-msgid "The following changes have been committed"
-msgstr "A következő módosítások lettek alkalmazva"
-
-msgid "The following changes have been reverted"
-msgstr "A következő módosítások lettek visszavonva"
-
-msgid "The following rules are currently active on this system."
-msgstr "Jelenleg a következő szabályok aktívak a rendszeren."
-
-msgid "The given network name is not unique"
-msgstr "A megadott hálózati név már létezik"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"A hardver nem képes többszörös SSID kezelésre ezért a meglévő beállítások "
-"elvesznek ha folytatja."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"Az eszközön található hálózati portok kombinálhatók több <abbr "
-"title=\"Virtual Local Area Network\">VLAN</abbr>-ba, amelyekben a számítógépek "
-"közvetlenül kommunikálhatnak egmással. A <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>-ok gyakran a hálózati szegmensek elkülönítésére "
-"használják. Gyakran van egy alapértelmezett Uplink port a következő nagyobb "
-"hálózathoz (pl. az internet) való kapcsolódásra és a többi port a helyi "
-"hálózathoz."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "A kiválasztott protokoll eszköz hozzárendelést igényel"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr "A rendszer most törli a konfigurációs partíciót majd újraindul."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"A rendszer frissítése folyamatban.<br /> NE KAPCSOLJA KI AZ ESZKÖZT!<br /> "
-"Várjon néhány percet, amíg az eszköz ismételten elérhető. Az eszköz "
-"eléréséhez a beállításaitól függően szükséges lehet a számítógépe IP-címének "
-"megújítása."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"A feltöltött image fájl formátuma nem támogatott. Ügyeljen arra, hogy a "
-"platformjának megfelelő általános image formátumot válassza ki."
-
-msgid "There are no active leases."
-msgstr "Nincsenek aktív bérletek."
-
-msgid "There are no pending changes to apply!"
-msgstr "Nincsenek alkalmazásra váró módosítások!"
-
-msgid "There are no pending changes to revert!"
-msgstr "Nincsenek visszavonásra váró változtatások!"
-
-msgid "There are no pending changes!"
-msgstr "Nincsenek el nem mentett változtatások!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Nincs hozzárendelt eszköz, kérem csatoljon egy hálózati eszközt a \"Fizikai "
-"beállítások\" fülön."
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"A routeren jelenleg nincs jelszó beállítva. Állítsa be a root felhasználó "
-"jelszavát a felhasználói felület védelme és az SSH elérés engélyezése "
-"érdekében."
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Ez egy shell mintákból álló lista a rendszer frissítés során megőrzendő "
-"fájlok és könytárak meghatározására. Az /etc/config/ könyvtárban található "
-"módosított fájlok és bizonyos további beállítások automatikusan megőrződnek."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"Ez a 32 bájtos hexadecimálan kódolt felhasználói azonosító, nem a "
-"bejelentkezési név"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Ez a /etc/rc.local fájl tartalma. Ide írhatja be a saját parancsait (az "
-"'exit 0' sor elé) a boot folyamat végén történő futtatásukhoz."
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Ez az egyetlen <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> a helyi hálózaton"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "Ez a rendszer crontab, amiben időzített feladatok definiálhatók."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Ez a lista a rendszerben jelenleg futó folyamatokról és azok állapotáról ad "
-"áttekintést."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "Ez a lap a gombok egyedi működésének beállítását teszi lehetővé"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Ez a lap a rendszerben jelenleg aktív hálózati kapcsolatokról ad áttekintést."
-
-msgid "This section contains no values yet"
-msgstr "Ez a szakasz még nem tartalmaz értékeket"
-
-msgid "Time Synchronization"
-msgstr "Idő szinkronizálás"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "Idő szinkronizálás még nincs beállítva."
-
-msgid "Timezone"
-msgstr "Időzóna"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Itt tölthet fel egy korábban létrehozott biztonsági mentés archívumot a "
-"konfigurációs fájlok visszaállításához."
-
-msgid "Total Available"
-msgstr "Összes elérhető"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "Forgalom"
-
-msgid "Transfer"
-msgstr "Átvitel"
-
-msgid "Transmission Rate"
-msgstr "Átviteli sebesség"
-
-msgid "Transmit"
-msgstr "Küldés"
-
-msgid "Transmit Power"
-msgstr "Adóteljesítmény"
-
-msgid "Transmitter Antenna"
-msgstr "Adó antenna"
-
-msgid "Trigger"
-msgstr "Trigger"
-
-msgid "Trigger Mode"
-msgstr "Trigger mód"
-
-msgid "Tunnel ID"
-msgstr "Tunnel azonosító"
-
-msgid "Tunnel Interface"
-msgstr "Tunnel interfész"
-
-msgid "Turbo Mode"
-msgstr "Turbó mód"
-
-msgid "Tx-Power"
-msgstr "Adóteljesítmény"
-
-msgid "Type"
-msgstr "Típus"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "Csak UTMS"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "USB eszköz"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Nem indiítható"
-
-msgid "Unknown"
-msgstr "Ismeretlen"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Ismeretlen hiba, a jelszó nem lett megváltoztatva!"
-
-msgid "Unmanaged"
-msgstr "Nem kezelt"
-
-msgid "Unsaved Changes"
-msgstr "El nem mentett módosítások"
-
-msgid "Unsupported protocol type."
-msgstr "Nem támogatott protokoll típus."
-
-msgid "Update lists"
-msgstr "Listák frissítése"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Itt tölthet fel egy új sysupgrade-kompatibilis képet a futó firmware "
-"lecseréléséhez. A jelenlegi beállítások megtartásához jelölje be a "
-"\"Beállítások megtartása\" négyzetet (OpenWrt-vel kompatibilis firmware kép "
-"szükséges)."
-
-msgid "Upload archive..."
-msgstr "Archívum feltöltése..."
-
-msgid "Uploaded File"
-msgstr "Feltöltött fájl"
-
-msgid "Uptime"
-msgstr "Működési idő"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "<code>/etc/ethers</code> használata"
-
-msgid "Use DHCP gateway"
-msgstr "DHCP kiszolgáló használata"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Másik fél által ajánlott DNS szerverek használata"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "ISO/IEC 3166 alpha2 országkódok használata"
-
-msgid "Use MTU on tunnel interface"
-msgstr "MTU használata az alagút interfészen"
-
-msgid "Use TTL on tunnel interface"
-msgstr "TTL használata az alagút interfészen"
-
-msgid "Use as root filesystem"
-msgstr "Gyökér fájlrenszerként történő használat"
-
-msgid "Use broadcast flag"
-msgstr "Broadcast flag használata"
-
-msgid "Use custom DNS servers"
-msgstr "Egyedi DNS szerverek használata"
-
-msgid "Use default gateway"
-msgstr "Alapértelmezett átjáró használata"
-
-msgid "Use gateway metric"
-msgstr "Átjáró metrikájának használata"
-
-msgid "Use preferred lifetime"
-msgstr "Előnyben részesített élettartam használata"
-
-msgid "Use routing table"
-msgstr "Útválasztó tábla használata"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Használja a <em>Hozzáadás</em> gombot új bérleti bejegyzés hozzáadásához. A "
-"<em>MAC-cím</em> azonosítja a gépet. az <em>IPv4-cím</em> adja meg a "
-"használandó rögzített IP címet és a <em>Gépnév</em> lesz szimbolikus névként "
-"hozzárendelve az igénylő géphez."
-
-msgid "Use valid lifetime"
-msgstr "Érvényességi időtartam használata"
-
-msgid "Used"
-msgstr "Használt"
-
-msgid "Used Key Slot"
-msgstr "Használt kulcsindex"
-
-msgid "Username"
-msgstr "Felhasználónév"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "VLAN interfész"
-
-msgid "VLANs on %q"
-msgstr "VLAN-ok %q-n"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLAN-ok %q-n (%s)"
-
-msgid "VPN Server"
-msgstr "VPN kiszolgáló"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "DHCP kérés során küldendő 'Vendor Class'"
-
-msgid "Verify"
-msgstr "Ellenőrzés"
-
-msgid "Version"
-msgstr "Verzió"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "WEP nyílt rendszer"
-
-msgid "WEP Shared Key"
-msgstr "WEP megosztott kulcs"
-
-msgid "WEP passphrase"
-msgstr "WEP jelmondat"
-
-msgid "WMM Mode"
-msgstr "WMM mód"
-
-msgid "WPA passphrase"
-msgstr "WPA jelmondat"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA titkosításhoz kliens módnál 'wpa_supplicant', hozzáférési pont illetve "
-"ad-hoc módnál 'hostapd' telepítése szükséges."
-
-msgid "Waiting for changes to be applied..."
-msgstr "Várakozás a változtatások alklamazására..."
-
-msgid "Waiting for command to complete..."
-msgstr "Várakozás a parancs befejezésére..."
-
-msgid "Warning"
-msgstr "Figyelmeztetés"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Figyelem: vannak el nem mentett változások melyek el fognak veszni az "
-"újraindítás során!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr "Vezetéknélküli rész"
-
-msgid "Wireless Adapter"
-msgstr "Vezetéknélküli adapter"
-
-msgid "Wireless Network"
-msgstr "Vezetéknélküli hálózat"
-
-msgid "Wireless Overview"
-msgstr "Vezetéknélküli rész áttekintés"
-
-msgid "Wireless Security"
-msgstr "Vezetéknélküli biztonság"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Vezetéknélküli hálózat le van tiltva vagy nincs kapcsolódva"
-
-msgid "Wireless is restarting..."
-msgstr "Vezetéknélküli rész újraindítása folyamatban..."
-
-msgid "Wireless network is disabled"
-msgstr "Vezetéknélküli hálózat letiltva"
-
-msgid "Wireless network is enabled"
-msgstr "Vezetéknélküli hálózat engedélyezve"
-
-msgid "Wireless restarted"
-msgstr "Vezetéknélküli rész újraindítva"
-
-msgid "Wireless shut down"
-msgstr "Vezetéknélküli rész leállítása"
-
-msgid "Write received DNS requests to syslog"
-msgstr "A kapott DNS kéréseket írja a rendszernaplóba"
-
-msgid "XR Support"
-msgstr "XR támogatás"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Itt engedélyezheti vagy tilthatja le a telepített indítási állományokat. A "
-"módosítások a rendszer újraindítása után lesznek alakalmazva.<br /"
-"><strong>Figyelem: alapvető indítási állomány pl. \"network\" letiltása "
-"esetén, az eszköz elérhetetlenné válhat!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Engélyezze a Java Szkripteket a böngészőjében, mert anélkül a LuCI nem fog "
-"megfelelően működni."
-
-msgid "any"
-msgstr "bármelyik"
-
-msgid "auto"
-msgstr "automatikus"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "áthidalt"
-
-msgid "create:"
-msgstr "új:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "híd létrehozása a megadott interfész(ek) között"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "letiltás"
-
-msgid "expired"
-msgstr "lejárt"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"fájl ahová a <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-"bérletek tárolásra kerülnek"
-
-msgid "forward"
-msgstr "továbbítás"
-
-msgid "full-duplex"
-msgstr "full-duplex"
-
-msgid "half-duplex"
-msgstr "half-duplex"
-
-msgid "help"
-msgstr "súgó"
-
-msgid "hidden"
-msgstr "rejtett"
-
-msgid "if target is a network"
-msgstr "ha a cél hálózat"
-
-msgid "input"
-msgstr "bemenet"
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "helyi <abbr title=\"Domain Name System\">DNS</abbr> fájl"
-
-msgid "no"
-msgstr "nem"
-
-msgid "no link"
-msgstr "nincs link"
-
-msgid "none"
-msgstr "nincs"
-
-msgid "off"
-msgstr "ki"
-
-msgid "on"
-msgstr "be"
-
-msgid "open"
-msgstr "nyitás"
-
-msgid "routed"
-msgstr "irányított"
-
-msgid "tagged"
-msgstr "cimkézett"
-
-msgid "unknown"
-msgstr "ismeretlen"
-
-msgid "unlimited"
-msgstr "korlátlan"
-
-msgid "unspecified"
-msgstr "nincs meghatározva"
-
-msgid "unspecified -or- create:"
-msgstr "nincs magadva -vagy- új:"
-
-msgid "untagged"
-msgstr "cimkézetlen"
-
-msgid "yes"
-msgstr "igen"
-
-msgid "« Back"
-msgstr "« Vissza"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Várakozás a routerre..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Beépített NTP kiszolgáló engedélyezése"
-
-#~ msgid "Active Leases"
-#~ msgstr "Aktív bérletek"
-
-#~ msgid "Open"
-#~ msgstr "Megnyitás"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Bit ráta"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Beállítások / Alkalmaz"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Beállítások / Módosítások"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Beállítások / Visszavonás"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC cím"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">Titkosított</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-felderítés"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Válassza ki azt a hálózatot amihez ezt a vezetéknélküli interfészt "
-#~ "csatlakoztatni akarja. Válassza a <em>nincs megadva</em> elemet ha nem "
-#~ "akarja semmilyen hálózathoz csatlakoztatni vagy töltse ki az <em>új</em> "
-#~ "mezőt új hálózat létrehozásához."
-
-#~ msgid "Create Network"
-#~ msgstr "Új hálózat"
-
-#~ msgid "Link"
-#~ msgstr "Kapcsolat"
-
-#~ msgid "Networks"
-#~ msgstr "Hálózatok"
-
-#~ msgid "Power"
-#~ msgstr "Teljesítmény"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Wifi hálózatok az Ön környezetében"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-jelölés: cím/"
-#~ "előtag"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Szerver"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-cím"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "Alternatív IP címek"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "IPv6 beállítás"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Megjegyzés: ha olyan interfészt választ ami másik hálózat része, akkor az "
-#~ "ebbe a hálózatba lesz áthelyezve."
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Biztos, hogy törölni akarja ezt az interfészt? A törlés nem "
-#~ "visszavonható! Elvesztheti a hozzáférést ehhez a routerhez, ha ezen az "
-#~ "interfészen keresztül kapcsolódik hozzá."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Biztos, hogy törölni akarja ezt a vezetéknélküli hálózatot? A törlés nem "
-#~ "visszavonható! Elvesztheti a hozzáférést ehhez a routerhez, ha ezen a "
-#~ "vezetéknélküli hálózaton keresztül kapcsolódik hozzá. "
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Biztos, hogy leállítja a \"%s\" interfészt? Elvesztheti a hozzáféreést "
-#~ "ehhez a routerher ha ezen az interfészen kapcsolódik hozzá."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Biztos, hogy leállítja a hálózatot? Elvesztheti a hozzáférést ehhez a "
-#~ "routerhez, ha ezen a hálózaton keresztül pacsolódik hozzá."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "A hálózati portok a routeren összekapcsolhatók több <abbr title=\"Virtual "
-#~ "Local Area Network\">VLAN</abbr>-ba, melyeken belül a számítógépek "
-#~ "közvetlenül tudnak kommunikálni egymással. A <abbr title=\"Virtual Local "
-#~ "Area Network\">VLAN</abbr>-okat gyakran használják különböző "
-#~ "hálózatrészek szétválasztására. Általában van egy felmenő port a "
-#~ "következő nagyobb hálózathoz mint az internet, és további portok a helyi "
-#~ "hálózathoz."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Átmeneti tárazás engedélyezése"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6 IPv4 felett"
-
-#~ msgid "Time Synchronisation"
-#~ msgstr "Idő szinkronizálás"
-
-#~ msgid "Client Port"
-#~ msgstr "Ügyfél port"
-
-#~ msgid "Statistics"
-#~ msgstr "Statisztikák"
-
-#~ msgid "Client Address"
-#~ msgstr "Ügyfél cím"
-
-#~ msgid "Active UPnP Redirects"
-#~ msgstr "Aktív UPnP átirányítások"
-
-#~ msgid "Age"
-#~ msgstr "Kor"
-
-#~ msgid "The AHCP Service is not running."
-#~ msgstr "Az AHCP szolgáltatás nem fut."
-
-#~ msgid "VnStat Traffic Monitor"
-#~ msgstr "VnStat forgalom figyelő"
-
-#~ msgid "AHCP Server"
-#~ msgstr "AHCP kiszolgáló"
-
-#~ msgid "The AHCP Service is running with ID %s."
-#~ msgstr "Az AHCP szolgáltatás fut, azonosítója: %s."
-
-#~ msgid "SIP devices on Network"
-#~ msgstr "SIP eszközök a hálózaton"
-
-#~ msgid "Devices on Network"
-#~ msgstr "Eszközök a hálózaton"
-
-#~ msgid "There are no active redirects."
-#~ msgstr "Nincsenek aktív átirányítások."
-
-#~ msgid "SIP Devices on Network"
-#~ msgstr "SIP eszközök a hálózaton"
-
-#~ msgid "Active AHCP Leases"
-#~ msgstr "Aktív AHCP bérletek"
diff --git a/po/hu/commands.po b/po/hu/commands.po
deleted file mode 100644
index 5cd0ec7..0000000
--- a/po/hu/commands.po
+++ /dev/null
@@ -1,98 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-24 18:47+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr "A beállított parancs rövid szöveges leírása"
-
-msgid "Access command with"
-msgstr "Parancs hozzáférése"
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-"Engedélyezi a parancs végrehajtását és kimenetének letöltését előzetes "
-"hitelesítés nélkül"
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr "A felhasználó által további parancsori argumentumok adhatók meg"
-
-msgid "Arguments:"
-msgstr "Argumentumok:"
-
-msgid "Binary data not displayed, download instead."
-msgstr "Bináris adat nem jelenik meg, töltse le helyette."
-
-msgid "Code:"
-msgstr "Kód:"
-
-msgid "Collecting data..."
-msgstr "Adatgyűjtés..."
-
-msgid "Command"
-msgstr "Paracs"
-
-msgid "Command failed"
-msgstr "Parancs végrehajtás sikertelen"
-
-msgid "Command line to execute"
-msgstr "Futtatandó parancssor"
-
-msgid "Command successful"
-msgstr "Parancs végrehajtás sikeres"
-
-msgid "Command:"
-msgstr "Parancs:"
-
-msgid "Configure"
-msgstr "Beállítás"
-
-msgid "Custom Commands"
-msgstr "Egyedi parancsok"
-
-msgid "Custom arguments"
-msgstr "Egyedi argumentumok"
-
-msgid "Dashboard"
-msgstr "Vezérlőpult"
-
-msgid "Description"
-msgstr "Leírás"
-
-msgid "Download"
-msgstr "Letöltés"
-
-msgid "Failed to execute command!"
-msgstr "Parancs végrehajtása sikertelen!"
-
-msgid "Link"
-msgstr "Link"
-
-msgid "Loading"
-msgstr "Betöltés"
-
-msgid "Public access"
-msgstr "Nyilvános hozzáférés"
-
-msgid "Run"
-msgstr "Futtatás"
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-"Ezen az oldalon egyéni shell parancsokat állíthat be, amelyeket könnyen "
-"felhasználhat a webes felületen."
-
-msgid "Waiting for command to complete..."
-msgstr "Várakozás a parancs befejezésére..."
diff --git a/po/hu/coovachilli.po b/po/hu/coovachilli.po
deleted file mode 100644
index 5ac8278..0000000
--- a/po/hu/coovachilli.po
+++ /dev/null
@@ -1,26 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-07-05 16:44+0200\n"
-"Last-Translator: Gyula <pro564@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Hálózati konfiguráció"
-
-msgid "RADIUS configuration"
-msgstr "RADIUS konfiguráció"
-
-msgid "UAM and MAC Authentication"
-msgstr "UAM és MAC azonosítás"
diff --git a/po/hu/ddns.po b/po/hu/ddns.po
deleted file mode 100644
index 9a482c0..0000000
--- a/po/hu/ddns.po
+++ /dev/null
@@ -1,91 +0,0 @@
-# Generated from applications/luci-ddns/luasrc/model/cbi/ddns/ddns.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2013-01-28 13:49+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "IP-cím változás ellenőrzése minden"
-
-msgid "Check-time unit"
-msgstr "Időegység"
-
-msgid "Custom update-URL"
-msgstr "Egyéni update-URL"
-
-msgid "Dynamic DNS"
-msgstr "Dinamikus DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"A dinamikus DNS lehetővé teszi, hogy a routere elérhető legyen egy fix host "
-"névvel akkor is ha dinamikusan változó IP címmel rendelkezik."
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "Event interface"
-msgstr "Esemény interfész"
-
-msgid "Force update every"
-msgstr "Frissítés erőltetése minden"
-
-msgid "Force-time unit"
-msgstr "Időegység"
-
-msgid "Hostname"
-msgstr "Hostnév"
-
-msgid "Interface"
-msgstr "Interfész"
-
-msgid "Network"
-msgstr "Hálózat"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "Melyik interfész indulása váltsa ki a ddns script indítását."
-
-msgid "Password"
-msgstr "Jelszó"
-
-msgid "Service"
-msgstr "Szervíz"
-
-msgid "Source of IP address"
-msgstr "Az IP cím forrása"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Felhasználónév"
-
-msgid "custom"
-msgstr "egyéni"
-
-# Hours
-msgid "h"
-msgstr "óra"
-
-msgid "interface"
-msgstr "interfész"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "perc"
-
-msgid "network"
-msgstr "hálózat"
diff --git a/po/hu/diag_core.po b/po/hu/diag_core.po
deleted file mode 100644
index f9f6e66..0000000
--- a/po/hu/diag_core.po
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-07-05 16:44+0200\n"
-"Last-Translator: Gyula <pro564@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr "Diagnosztikai beállítások"
-
-msgid "Diagnostics"
-msgstr "Diagnosztika"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Az itt található statisztikák attól függően változnak, hogy milyen modulokat "
-"telepítettél az eszközödre."
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Ennek a menünek az elemei lehetővé teszik hálózati diagnosztikai tesztek "
-"elvégzését a rendszeren a hibaelhárítás megkönnyítésére."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Ebben a menüben beállíthatók a hálózati diagnosztika elemei, mint például "
-"eszközök keresése és ping teszt."
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d_diag"
diff --git a/po/hu/diag_devinfo.po b/po/hu/diag_devinfo.po
deleted file mode 100644
index e2acfdd..0000000
--- a/po/hu/diag_devinfo.po
+++ /dev/null
@@ -1,215 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-29 18:51+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr "Hozzáadás"
-
-msgid "Beginning of MAC address range"
-msgstr "MAC cím tartomány kezdete"
-
-msgid "Config Phone Scan"
-msgstr "Telefon keresés beállításai"
-
-msgid "Configure"
-msgstr "Beállítás"
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr "Törlés"
-
-msgid "Device Scan Config"
-msgstr "Eszköz keresés beállításai"
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Felfedezett eszközök"
-
-msgid "Devices on Network"
-msgstr "Eszközök a hálózatban"
-
-msgid "Edit"
-msgstr "Szerkesztés"
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "End of MAC address range"
-msgstr "MAC cím tartomány vége"
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr "IP cím"
-
-msgid "Interface"
-msgstr "Interfész"
-
-msgid "Invalid"
-msgstr "Érvénytelen"
-
-msgid "Link to Device"
-msgstr "Eszközre mutató hivatkozás"
-
-msgid "MAC Address"
-msgstr "MAC cím"
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr "MAC eszköz felülbírálása"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"A rendszer és IEEE adatbázisok felülbíráláshoz használt MAC cím tartomány és "
-"információ"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-"A kérések küldése közötti szünet időtartama ezredmásodpercben "
-"(alapértelmezés: 100)"
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr "Név"
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr "Nem találhatóak SIP eszközök"
-
-msgid "No devices detected"
-msgstr "Nem található semmilyen eszköz"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Az elküldött kérések száma (alapértelmezés: 1)"
-
-msgid "OUI Owner"
-msgstr "OUI tulajdonos"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"A meghatározott tartományba tartozó MAC címeknél felülbírálja a 'MAC to "
-"Device Info' szkript (mac-to-devinfo) által visszadott információt."
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr "Telefon információ"
-
-msgid "Phone Scan"
-msgstr "Telefon keresés"
-
-msgid "Phone Scanning Configuration"
-msgstr "Telefon keresési beállítások"
-
-msgid "Phones"
-msgstr "Telefonok"
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr "Nyers"
-
-msgid "Repeat Count"
-msgstr "Ismétlés száma"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr "SIP eszköz információ"
-
-msgid "SIP Device Scan"
-msgstr "SIP eszközök keresése"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "SIP eszköz keresés beállításai"
-
-msgid "SIP Devices on Network"
-msgstr "SIP eszközök a hálózatban"
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr "Eszközök keresése a megadott hálózatokban."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr "Scans for devices on specified networks."
-
-msgid "Sleep Between Requests"
-msgstr "Kérések közötti szünet"
-
-msgid "Subnet"
-msgstr "Alhálózat"
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Várakozási idő a válasz beérkezésére (alapértelemezés: 10)"
-
-msgid "Timeout"
-msgstr "Várakozási idő"
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr "egyéb hálózatok ellenőrzése"
diff --git a/po/hu/ffwizard.po b/po/hu/ffwizard.po
deleted file mode 100644
index 6bae6c5..0000000
--- a/po/hu/ffwizard.po
+++ /dev/null
@@ -1,175 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Névtelen statisztikák küldésének engedélyezése erről a csomópontról"
-
-msgid "Channel"
-msgstr "Csatorna"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Pipáld be ezt, hogy megvédd a LAN-od más csomópontoktól vagy kliensektől"
-
-msgid "Configure network"
-msgstr "Hálózat beállítása"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-"Csomópontod összekötése más csomópontokkal internetes alagút segítségével"
-
-msgid "DHCP IP range"
-msgstr "DHCP IP tartomány"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "A DHCP automatikusan ki fog osztani IP címeket a klienseknek"
-
-msgid "DNS Server"
-msgstr "DNS szerver"
-
-msgid "Enable DHCP"
-msgstr "DHCP bekapcsolása"
-
-msgid "Gateway"
-msgstr "Átjáró"
-
-msgid "Heartbeat"
-msgstr "Szívverés"
-
-msgid "IP address"
-msgstr "IP cím"
-
-msgid "L2gvpn tunnel"
-msgstr "L2gvpn alagút"
-
-msgid "Limit download bandwidth"
-msgstr "Letöltési sávszélesség korlátozása"
-
-msgid "Limit upload bandwidth"
-msgstr "Feltöltési sávszélesség korlátozása"
-
-msgid "Mesh IP address"
-msgstr "Háló IP cím"
-
-msgid "Mesh IPv6 Address"
-msgstr "Háló IPv6 cím"
-
-msgid "Netmask"
-msgstr "Hálózati maszk"
-
-msgid "Password"
-msgstr "Jelszó"
-
-msgid "Password confirmation"
-msgstr "Jelszó megerősítése"
-
-msgid "Password successfully changed"
-msgstr "Jelszó sikeresen megváltoztatva"
-
-msgid "Protect LAN"
-msgstr "A LAN védelme"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Válaszd ezt a jelölőnégyzetet a hálózati interfészeid beállításához"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Válaszd ezt, ha engedélyezni akarod másoknak, hogy elérjék az internetet a "
-"kapcsolatodon keresztül"
-
-msgid "Share your internet connection"
-msgstr "Internetkapcsolatod megosztása"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Az az IP tartomány, amelyből kikerülnek a kliensek címei (pl. 10.1.2.1/28). "
-"Ha ez egy, a hálózatodon található tartomány, akkor HNA-ként lesz "
-"bejelentve. Minden más tartomány NAT-ot fog használni. Ha üresen hagyod, "
-"akkor a közösségi profilból kiolvasott alapértelmezések lesznek használatban."
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "Az IPv6 cím automatikusan számolódik."
-
-msgid "The protocol to use for internet connectivity."
-msgstr "Az internetes tevékenységekhez használt protokoll"
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Ez egy egyedi cím a hálózaton (pl. 10.1.1.1), és a helyi közösségnél kell "
-"regisztrálva lennie."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Ez létre fog hozni egy új virtuális vezeték nélküli interfészt Access Point "
-"módban."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Ez a varázsló segíteni fog téged a router beállításában Freifunk és más "
-"hasonló vezeték nélküli közösségi hálózatokhoz."
-
-msgid "Unknown Error"
-msgstr "Ismeretlen hiba"
-
-msgid "Username"
-msgstr "Felhasználói név"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Virtuális hozzáférési pont (VAP)"
-
-msgid "Wizard"
-msgstr "Varázsló"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-"Az eszközödnek és a szomszédos csomópontoknak ugyanazt a csatornát kell "
-"használniuk."
-
-msgid "dhcp"
-msgstr "dhcp"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "static"
-msgstr "állandó"
-
-msgid "Configure this interface."
-msgstr "Interfész beállítása."
-
-msgid "recommended"
-msgstr "ajánlott"
-
-msgid "Basic settings"
-msgstr "Alapvető beállítások"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Az alapvető beállítások nem teljesek. Kérem, menjen ide:"
-
-msgid "Error"
-msgstr "Hiba"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr "Nem használhatod a varázslót, mert néhány szükséges érték hiányzik."
-
-msgid "and fill out all required fields."
-msgstr "és töltse ki az összes szükséges mezőt."
diff --git a/po/hu/firewall.po b/po/hu/firewall.po
deleted file mode 100644
index 7abf182..0000000
--- a/po/hu/firewall.po
+++ /dev/null
@@ -1,563 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-27 13:16+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr "%s%s %s-el"
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr "(Névtelen bejegyzés)"
-
-msgid "(Unnamed Rule)"
-msgstr "(Névtelen szabály)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(Névtelen SNAT)"
-
-msgid "-- Please choose --"
-msgstr "-- Kérem válasszon --"
-
-msgid "-- custom --"
-msgstr "-- egyéni --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> csomag/<var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr "<var>%d</var> csom. <var>%s</var>-enként, burst <var>%d</var> csom."
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> és korlátozás %s-re"
-
-msgid "Action"
-msgstr "Művelet"
-
-msgid "Add"
-msgstr "Hozzáadás"
-
-msgid "Add and edit..."
-msgstr "Hozzáadás és szerkesztés..."
-
-msgid "Advanced Settings"
-msgstr "Haladó beállítások"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Továbbítás engedélyezése ezekből a <em>forrás zónákból</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Továbbítás engedélyezése ezekbe a <em>cél zónákba</em>:"
-
-msgid "Any"
-msgstr "Bármelyik"
-
-msgid "Covered networks"
-msgstr "Lefedett hálózatok"
-
-msgid "Custom Rules"
-msgstr "Egyéni szabályok"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Az egyedi szabályok lehetővé teszik tetszőleges iptables parancsok "
-"futtatását melyekre a tűzfal keretrendszer egyébként nem biztosít "
-"lehetőséget. A parancsok a tűzfal minden újraindításakor futtatásra "
-"kerülnek, közvetlenül az alapértelmezett szabálykészletek betöltése után."
-
-msgid "Destination IP address"
-msgstr "Cél IP-cím"
-
-msgid "Destination address"
-msgstr "Cél cím"
-
-msgid "Destination port"
-msgstr "Cél port"
-
-msgid "Destination zone"
-msgstr "Cél zóna"
-
-msgid "Do not rewrite"
-msgstr "Ne írja felül"
-
-msgid "Drop invalid packets"
-msgstr "Érvénytelen csomagok eldobása"
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "Enable NAT Loopback"
-msgstr "NAT visszacsatolás engedélyezése"
-
-msgid "Enable SYN-flood protection"
-msgstr "SYN-flood védelem engedélyezése"
-
-msgid "Enable logging on this zone"
-msgstr "Naplózás engeélyezése ezen a zónán"
-
-msgid "External IP address"
-msgstr "Külső IP cím"
-
-msgid "External port"
-msgstr "Külső port"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr "További argumentumok"
-
-msgid "Firewall"
-msgstr "Tűzfal"
-
-msgid "Firewall - Custom Rules"
-msgstr "Tűzfal - Egyéni szabályok"
-
-msgid "Firewall - Port Forwards"
-msgstr "Tűzfal - Port továbbítások"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Tűzfal - Forgalmi szabályok"
-
-msgid "Firewall - Zone Settings"
-msgstr "Tűzfal - Zóna beállítások"
-
-msgid "Force connection tracking"
-msgstr "Kapcsolat követés kényszerítése"
-
-msgid "Forward"
-msgstr "Továbbítás"
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr "%s felől %s-ben"
-
-msgid "From %s in %s with source %s"
-msgstr "%s felől %s-ben %s forrással"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "%s felől %s-ben %s és %s forrással"
-
-msgid "General Settings"
-msgstr "Általános beállítások"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 és IPv6"
-
-msgid "IPv4 only"
-msgstr "csak IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "csak IPv6"
-
-msgid "Input"
-msgstr "Bemenet"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Zónák-közötti továbbítás"
-
-msgid "Internal IP address"
-msgstr "Belső IP cím"
-
-msgid "Internal port"
-msgstr "Belső port"
-
-msgid "Internal zone"
-msgstr "Belső zóna"
-
-msgid "Limit log messages"
-msgstr "Napló üzenetek korlátozása"
-
-msgid "MSS clamping"
-msgstr "MSS clamping engegélyezése"
-
-msgid "Masquerading"
-msgstr "Álcázás"
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr "ICMP típus egyezése"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-"Továbbított forgalom szűrése a megadott cél port, vagy port tartomány "
-"szerint."
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Bejövő forgalom továbbítása a megadott cél port, vagy porttartomány egyezése "
-"esetén"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Az ügyfél gép megadott portjáról, vagy port tartományából indított forgalom "
-"szűrése. "
-
-msgid "Name"
-msgstr "Név"
-
-msgid "New SNAT rule"
-msgstr "Új SNAT szabály"
-
-msgid "New forward rule"
-msgstr "Új továbbítási szabály"
-
-msgid "New input rule"
-msgstr "Új bemeneti szabály"
-
-msgid "New port forward"
-msgstr "Új port továbbítás"
-
-msgid "New source NAT"
-msgstr "Új forrás NAT"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "Csak a megadott IP címre irányított bejövő forgalmat egyeztesse."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Csak a megadott MAC címekről érkező bejövő forgalmat egyeztesse."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-"Csak a megadott IP címről illetve IP címtartományból érkező bejövő forgalmat "
-"egyeztesse."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Csak az ügyfél gép megadott forrás portjáról illetve forrás port "
-"tartományába tartozó portról indított bejövő forgalmat egyeztesse."
-
-msgid "Open ports on router"
-msgstr "Port megnyitása a routeren"
-
-msgid "Other..."
-msgstr "Egyéb..."
-
-msgid "Output"
-msgstr "Kimenet"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-"További argumentumok küldése az iptables részére. Használja körültekintően!"
-
-msgid "Port Forwards"
-msgstr "Port továbbítás"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"A port továbbítás lehetővé teszi az interneten lévő távoli számítógépeknek a "
-"privát helyi hálózat bizonyos számítógépéhez vagy szolgáltatásához történő "
-"csatlakozását."
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr "Átirányítja az egyező bejövő forgalmat a belső gép megadott portjához"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Átirányítja az egyező bejövő forgalmat a megadott belső géphez"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Álcázás korlátozása a megadott cél alhálózatokra"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Álcázás korlátozása a megadott forrás alhálózatokra"
-
-msgid "Restrict to address family"
-msgstr "Korlátozás cím családra"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "Az összeíllő forgalom átírása a megadott címre."
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Az összeillő forgalom átírása a megadott forrás portra. Amennyibe üresen van "
-"hagyva, csak az IP cím kerül átírásra."
-
-msgid "Rewrite to source %s"
-msgstr "Átírás %s forrásra"
-
-msgid "Rewrite to source %s, %s"
-msgstr "Átírás %s, %s forrásra"
-
-msgid "SNAT IP address"
-msgstr "SNAT IP cím"
-
-msgid "SNAT port"
-msgstr "SNAT port"
-
-msgid "Source IP address"
-msgstr "Forrás IP cím"
-
-msgid "Source MAC address"
-msgstr "Forrás MAC cím"
-
-msgid "Source NAT"
-msgstr "Forrás NAT"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"A forrás NAT az álcázás olyan speciális formája, mely lehetővé teszi a "
-"kimenő forgalomhoz használt forrás IP címek aprólékos szabályozását, például "
-"több WAN cím hozzárendelését a belső alhálózatokhoz."
-
-msgid "Source address"
-msgstr "Forrás cím"
-
-msgid "Source port"
-msgstr "Forrás port"
-
-msgid "Source zone"
-msgstr "Forrás zóna"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"A tűzfal zónákat határoz meg a hálózati interfészek fölött a hálózati "
-"forgalom áramlásának szabályozására."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"Ez a lap lehetővé teszi a port továbbítási bejegyzések speciális "
-"tulajdonságainak módosítását. A legtöbb esetben ezeknek a beállításoknak a "
-"módosítása nem szükséges."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"Ez a lap lehetővé teszi a forgalmi szabály bejegyzés speciális "
-"tulajdonságainak módosítását, mint a forrás- és célgépek megfeleltetése."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr "Forrás IP-re"
-
-msgid "To source port"
-msgstr "Forrás portra"
-
-msgid "Traffic Rules"
-msgstr "Forgalmi szabályok"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"A forgalmi szabályok a különböző zónák között utazó csomagokra vonatkozó "
-"házirendet határozzák meg, például bizonyos gépek közötti forgalom "
-"megakadályozához vagy WAN portok megnyitásához a routeren."
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Az \"-- egyéni --\" lehetőség választásával több protokoll megadása "
-"lehetséges egymástól szóközzell elválasztva."
-
-msgid "Zone %q"
-msgstr "Zóna %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Zóna ⇒ Továbbítások"
-
-msgid "Zones"
-msgstr "Zónák"
-
-msgid "accept"
-msgstr "elfogadás"
-
-msgid "any"
-msgstr "bármelyik"
-
-msgid "any host"
-msgstr "bármelyik gép"
-
-msgid "any router IP"
-msgstr "bármelyik router IP"
-
-msgid "any zone"
-msgstr "bármelyik zóna"
-
-msgid "don't track"
-msgstr "ne kövesse"
-
-msgid "drop"
-msgstr "eldobás"
-
-msgid "reject"
-msgstr "visszautasítás"
-
-#~ msgid "Destination"
-#~ msgstr "Cél"
-
-#~ msgid "Family"
-#~ msgstr "Család"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "Továbbítás ide:%s/%s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "Továbbítás ide: %s, %s/%s"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Forrás"
-
-#~ msgid "Via"
-#~ msgstr "Keresztül"
-
-#~ msgid "Accept forward"
-#~ msgstr "Továbbítás engedélyezése"
-
-#~ msgid "Accept input"
-#~ msgstr "Bemenet engedélyezése"
-
-#~ msgid "Disable"
-#~ msgstr "Letiltás"
-
-#~ msgid "Discard forward"
-#~ msgstr "Kimenet eldobása"
-
-#~ msgid "Discard input"
-#~ msgstr "Bemenet eldobása"
-
-#~ msgid "Do not track forward"
-#~ msgstr "Ne kövesse a továbbítást"
-
-#~ msgid "Do not track input"
-#~ msgstr "Ne kövesse a bemenetet"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "IP tartomány"
-
-#~ msgid "IPs"
-#~ msgstr "IP-k"
-
-#~ msgid "MAC"
-#~ msgstr "MAC cím"
-
-#~ msgid "MACs"
-#~ msgstr "MAC címek"
-
-#~ msgid "Refuse forward"
-#~ msgstr "Továbbítás megtagadása"
-
-#~ msgid "Refuse input"
-#~ msgstr "Bemenet megtagadása"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "Szabály letiltva"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "Szabály engedélyezve"
-
-#~ msgid "day"
-#~ msgstr "nap"
-
-#~ msgid "hour"
-#~ msgstr "óra"
-
-#~ msgid "minute"
-#~ msgstr "perc"
-
-#~ msgid "not"
-#~ msgstr "nem"
-
-#~ msgid "port"
-#~ msgstr "port"
-
-#~ msgid "ports"
-#~ msgstr "portok"
-
-#~ msgid "second"
-#~ msgstr "másodperc"
-
-#~ msgid "type"
-#~ msgstr "típus"
-
-#~ msgid "types"
-#~ msgstr "típusok"
diff --git a/po/hu/freifunk-policyrouting.po b/po/hu/freifunk-policyrouting.po
deleted file mode 100644
index 8d83098..0000000
--- a/po/hu/freifunk-policyrouting.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/hu/freifunk.po b/po/hu/freifunk.po
deleted file mode 100644
index a14be13..0000000
--- a/po/hu/freifunk.po
+++ /dev/null
@@ -1,386 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/hu/hd_idle.po b/po/hu/hd_idle.po
deleted file mode 100644
index 424532e..0000000
--- a/po/hu/hd_idle.po
+++ /dev/null
@@ -1,52 +0,0 @@
-# Generated from applications/luci-hd-idle/luasrc/model/cbi/hd_idle.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-07-10 21:04+0200\n"
-"Last-Translator: Gyula <pro564@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "Lemez"
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "Enable debug"
-msgstr "Hibakeresés engedélyezése"
-
-msgid "Idle-time"
-msgstr "Üresjárati idő"
-
-msgid "Idle-time unit"
-msgstr "Üresjárati idő egysége"
-
-msgid "Settings"
-msgstr "Beállítások"
-
-# Hours
-msgid "h"
-msgstr "óra"
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle egy a külső lemezek adott üresjárati idő után történő leállítására "
-"szolgáló segédprogram."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "perc"
diff --git a/po/hu/meshwizard.po b/po/hu/meshwizard.po
deleted file mode 100644
index f887a89..0000000
--- a/po/hu/meshwizard.po
+++ /dev/null
@@ -1,119 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/hu/minidlna.po b/po/hu/minidlna.po
deleted file mode 100644
index 52fbe74..0000000
--- a/po/hu/minidlna.po
+++ /dev/null
@@ -1,199 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-09 19:18+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Advanced Settings"
-msgstr "Haladó beállítások"
-
-msgid "Album art names:"
-msgstr "Borító album nevek:"
-
-msgid "Announced model number:"
-msgstr "Közölt modellszám:"
-
-msgid "Announced serial number:"
-msgstr "Közölt sorozatszám:"
-
-msgid "Browse directory"
-msgstr "Könyvtár tallózása"
-
-msgid "Collecting data..."
-msgstr "Adatok gyűjtése..."
-
-msgid "Database directory:"
-msgstr "Adatbázis könyvtár:"
-
-msgid "Enable TIVO:"
-msgstr "TIVO engedélyezése:"
-
-msgid "Enable inotify:"
-msgstr "Inotify engedélyezése:"
-
-msgid "Enable:"
-msgstr "Engedélyezés:"
-
-msgid "Friendly name:"
-msgstr "Egyéni név:"
-
-msgid "General Settings"
-msgstr "Általános beállítások"
-
-msgid "Interfaces:"
-msgstr "Interfészek:"
-
-msgid "Log directory:"
-msgstr "Napló könyvtár:"
-
-msgid "Media directories:"
-msgstr "Média könyvtárak:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"A MiniDLNA egy szerver alkalmazás, ami teljes mértékben kompatibilis a DLNA/"
-"UPnP-AV képes kliensekkel."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"A miniDLNA által az XML leírásban jelentett modellszám a kliensek számára."
-
-msgid "Music"
-msgstr "Zene"
-
-msgid "Network interfaces to serve."
-msgstr "Kiszolgált hálózati interfészek."
-
-msgid "Notify interval in seconds."
-msgstr "Értesítés intervalluma másodpercben."
-
-msgid "Notify interval:"
-msgstr "Értesítési intervallum:"
-
-msgid "Pictures"
-msgstr "Képek"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "HTTP forgalom (leírások, SOAP, média átvitel) portja."
-
-msgid "Port:"
-msgstr "Port:"
-
-msgid "Presentation URL:"
-msgstr "Szolgáltatott URL:"
-
-msgid "Root container:"
-msgstr "Gyökér konténer:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"A miniDLNA által az XML leírásban jelentett szériaszám a kliensek számára."
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-"Állítsa be, amennyiben a kliensek számára megjelenő nevet szeretné testre "
-"szabni."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Állítsa be, ha meg szeretné adni azt könyvtárat, ahová a a MiniDLNA az "
-"adatbázisát, illetve az album borító gyorsítótárat rögzítse."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-"Áttítsa be, ha meg szeretné adni azt a könyvtárat, ahová a MiniDLNA a napló "
-"állományait mentse."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"Engedélyezze az új fájlok automatikus felfedezéséhez szükséges inotify "
-"monitorozáshoz."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"Engedélyezze a .jpg és .mp3 fájlok közvetítéséhez TiVo támogatott HMO-k felé."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Engedélyezze a DLNA követelmények szigorú betartásához. Ez lehetővé teszi a "
-"nagyon nagy JPEG képek szerver oldali leméretezését, amik pl. a Sony DLNA "
-"termékek JPEG kiszolgáló teljesítményére nincsenek kedvező hatással."
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Állítsa be a vizsgálandó könyvtárra. Ha a könyvtárat egy adott típusú "
-"tartalom szerint szeretné korlátozni, akkor a neve előtt vesszővel "
-"elválasztva megadhatja a típust ('A' az audió, 'V' a videó, 'P' a képek "
-"számára. pl.: media_dir=A,/mnt/media/Music). Több könyvtár is megadható."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "A MiniSSDPd socket elérési útját határozza meg."
-
-msgid "Standard container"
-msgstr "Szabvány konténer"
-
-msgid "Strict to DLNA standard:"
-msgstr "DLNA követelmények szigorú betartása:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"A miniDLNA szolgáltatás aktív, %d hang, %d videó, %d kép fájl található. "
-
-msgid "The miniDLNA service is not running."
-msgstr "A miniDLNA szolgáltatás nem aktív."
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr "Fájlnevek listája, amik ellenőrzésre kerülnek albumborító keresésekor."
-
-msgid "Video"
-msgstr "Videó"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "miniDLNA állapot"
-
-msgid "miniSSDP socket:"
-msgstr "miniSSDP socket:"
-
-#~ msgid "Network interfaces to serve, comma delimited list."
-#~ msgstr "Kiszolgált hálózati interfészek vesszővel elválasztott listája."
-
-#~ msgid ""
-#~ "This is a list of file names to check for when searching for album art. "
-#~ "Note: names must be delimited with a forward slash '/'"
-#~ msgstr ""
-#~ "Ez egy lista azokról a fájlnevekről, amelyeket ellenőrizni kell a "
-#~ "lemezborító keresésekor. Megjegyzés: a neveket per jellel ('/') kell "
-#~ "elválasztani egymástól."
diff --git a/po/hu/mmc_over_gpio.po b/po/hu/mmc_over_gpio.po
deleted file mode 100644
index 758c711..0000000
--- a/po/hu/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-30 19:09+0200\n"
-"Last-Translator: romboyco <romboyco@gmail.com>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr "CLK_pin"
-
-msgid "CS_pin"
-msgstr "CS_pin"
-
-msgid "DI_pin"
-msgstr "DI_pin"
-
-msgid "DO_pin"
-msgstr "DO_pin"
-
-msgid "Enable"
-msgstr "Bekapcsolás"
-
-msgid "MMC/SD driver configuration"
-msgstr "MMC/SD driver konfiguráció"
-
-msgid "Mode"
-msgstr "Mód"
-
-msgid "Name"
-msgstr "Név"
-
-msgid "Settings"
-msgstr "Beállítások"
diff --git a/po/hu/multiwan.po b/po/hu/multiwan.po
deleted file mode 100644
index 20ff8d6..0000000
--- a/po/hu/multiwan.po
+++ /dev/null
@@ -1,124 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-30 19:12+0200\n"
-"Last-Translator: romboyco <romboyco@gmail.com>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Próbálkozások WAN átállás előtt"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Probálkozások WAN helyreállítás előtt"
-
-msgid "Auto"
-msgstr "Automatikus"
-
-msgid "Collecting data..."
-msgstr "Adatok gyűjtése..."
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Szabályok beállítása a kimenő forgalom megadott WAN kapcsolatra "
-"irányításához."
-
-msgid "DNS Server(s)"
-msgstr "DNS kiszolgáló(k)"
-
-msgid "Default Route"
-msgstr "Alapértelmezett útvonal"
-
-msgid "Destination Address"
-msgstr "Cél cím"
-
-msgid "Disable"
-msgstr "Letiltás"
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "Failing"
-msgstr "Csökkenő"
-
-msgid "Failover Traffic Destination"
-msgstr "Failover forgalom cél"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "ICMP gépek kapcsolat monitorozáshoz"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "ICMP csomagok időtúllépése a kapcsolat monitorozásánál"
-
-msgid "Health Monitor Interval"
-msgstr "Kapcsolat monitorozási intervallum"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"A kapcsolat monitorozás megállapítja és korrigálja a hálózati változásokat "
-"és sikertelen kapcsolatokat."
-
-msgid "KO"
-msgstr "KO"
-
-msgid "Load Balancer Distribution"
-msgstr "Load balancer megosztás"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Terhelés kiegyensúlyozás (kompatibilitás)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Terhelés kiegyensúlyozás (teljesítmény)"
-
-msgid "Multi-WAN"
-msgstr "Többszörös WAN"
-
-msgid "Multi-WAN Status"
-msgstr "Többszörös WAN állapot"
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Többszörös WAN forgalmi szabályok"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"A Multi-WAN lehetővé teszi több kapcsolat használatát egyidejűleg, vagy az "
-"elsődleges kapcsolat esetleges hibája esetén."
-
-msgid "None"
-msgstr "Nincs"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "Ports"
-msgstr "Portok"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Recovering"
-msgstr "Helyreállítás"
-
-msgid "Source Address"
-msgstr "Forrás cím"
-
-msgid "Unknown"
-msgstr "Ismeretlen"
-
-msgid "WAN Interfaces"
-msgstr "WAN interfészek"
-
-msgid "WAN Uplink"
-msgstr "WAN kapcsolat"
-
-msgid "all"
-msgstr "összes"
diff --git a/po/hu/ntpc.po b/po/hu/ntpc.po
deleted file mode 100644
index f69046f..0000000
--- a/po/hu/ntpc.po
+++ /dev/null
@@ -1,55 +0,0 @@
-# Generated from applications/luci-ntpc/luasrc/model/cbi/ntpc/*.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-07-10 21:05+0200\n"
-"Last-Translator: Gyula <pro564@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "Óra igazítás"
-
-msgid "Count of time measurements"
-msgstr "Időmérések száma"
-
-msgid "Current system time"
-msgstr "Jelenlegi rendszeridő"
-
-msgid "General"
-msgstr "Általános"
-
-msgid "Hostname"
-msgstr "Gépnév"
-
-msgid "Offset frequency"
-msgstr "Frekvencia eltolás"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "A rendszeridő szinkronizálása"
-
-msgid "Time Server"
-msgstr "Időszerver"
-
-msgid "Time Servers"
-msgstr "Időkiszolgálók"
-
-msgid "Time Synchronisation"
-msgstr "Idő szinkronizálás"
-
-msgid "Update interval (in seconds)"
-msgstr "Frissítési időköz (másodpercben)"
-
-msgid "empty = infinite"
-msgstr "üres = végtelen"
diff --git a/po/hu/olsr.po b/po/hu/olsr.po
deleted file mode 100644
index 7c5e5bb..0000000
--- a/po/hu/olsr.po
+++ /dev/null
@@ -1,576 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/hu/openvpn.po b/po/hu/openvpn.po
deleted file mode 100644
index 826e161..0000000
--- a/po/hu/openvpn.po
+++ /dev/null
@@ -1,557 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-09 19:22+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p' vagy 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "A kiszolgáló által küldött opciók elfogadás"
-
-msgid "Add"
-msgstr "Hozzáadás"
-
-msgid "Add route after establishing connection"
-msgstr "Útvonal hozzáadása a kapcsolat létrejötte után"
-
-msgid "Additional authentication over TLS"
-msgstr "További hitelesítés TLS-en keresztül"
-
-msgid "Allow client-to-client traffic"
-msgstr "Ügyfél-ügyfél közötti kapcsolat engedélyezése"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Több ügyfél engedélyezése ugyanazzal a tanúsítvánnyal"
-
-msgid "Allow only one session"
-msgstr "Csak egy munkafolyamat engedélyezése"
-
-msgid "Allow remote to change its IP or port"
-msgstr "A távoli gép IP címének vagy portjának megváltozatásának engedélyezése"
-
-msgid "Allowed maximum of connected clients"
-msgstr "A csatlakozott ügyfelek maximális megengedett száma"
-
-msgid "Allowed maximum of internal"
-msgstr "Belső kapcsolatok maximális száma"
-
-msgid "Allowed maximum of new connections"
-msgstr "Az új kapcsolatok maximálisan megengedett száma"
-
-msgid "Append log to file"
-msgstr "Napló hozzáfűzése fájlhoz"
-
-msgid "Authenticate using username/password"
-msgstr "Azonosítás felhasználónév és jelszó használatával"
-
-msgid "Automatically redirect default route"
-msgstr "Az alapértelmezett útvonal automatikus átirányítása"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Az alábbi listában találhatóak a beállított OpenVPN példányok és azok "
-"aktuális állapota"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "A TUN/TAP interfész lezárása előtt futtatandó shell script."
-
-msgid "Certificate authority"
-msgstr "Hitelesítésszolgáltató"
-
-msgid "Change process priority"
-msgstr "Folyamat prioritásának módosítása"
-
-msgid "Change to directory before initialization"
-msgstr "Váltás a könyvtárra inicializáslás előtt"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Kliens tanúsítvány összevetése a tiltólistával."
-
-msgid "Chroot to directory after initialization"
-msgstr "Gyökérkönyvtár váltás inicializáció után"
-
-msgid "Client is disabled"
-msgstr "Ügyfél letiltva"
-
-msgid "Configuration category"
-msgstr "Beállítások / Visszavonás"
-
-msgid "Configure client mode"
-msgstr "Ügyfél mód beállítása"
-
-msgid "Configure server bridge"
-msgstr "Kiszolgáló híd beállítása"
-
-msgid "Configure server mode"
-msgstr "Kiszolgáló mód beállítása"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Kapcsolódás Sock5 proxy-n keresztül"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "Kapcsolódás a távoli géphez HTTP proxyn keresztül"
-
-msgid "Connection retry interval"
-msgstr "Kapcsolódás újrapróbálkozási időköz"
-
-msgid "Cryptography"
-msgstr "Titkosítás"
-
-msgid "Daemonize after initialization"
-msgstr "Váltás démon módba inicializálás után"
-
-msgid "Delay n seconds after connection"
-msgstr "Kapcsolat felépítés után 'n' másodperc késleltetés"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr "Diffie Hellman paraméterek"
-
-msgid "Directory for custom client config files"
-msgstr "Egyéni ügyfél konfigurációs fájlok könyvtára "
-
-msgid "Disable Paging"
-msgstr "Lapozás letiltása"
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr "Újrajátszás védelem letiltása"
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr "Időbélyegeket ne naplózza"
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr "A paramétereket írja a naplóba"
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr "Engedélyezve"
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr "Érvénytelen"
-
-msgid "Keep local IP address on restart"
-msgstr "Helyi IP cím megtartása újraindításkor"
-
-msgid "Keep remote IP address on restart"
-msgstr "Távoli IP cím megtartása újraindításkor"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "tun/tap eszközök nyitva tartása újraindításkor"
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr "Helyi tanúsítvány"
-
-msgid "Local host name or ip address"
-msgstr "Helyi gép név vagy IP cím"
-
-msgid "Local private key"
-msgstr "Helyi privát kulcs"
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "A sorbaállított kimenő TCP csomagok maximális száma"
-
-msgid "Networking"
-msgstr "Hálózatkezelés"
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Lefoglalt broadcast pufferek száma"
-
-msgid "Number of lines for log file history"
-msgstr "Naplófájl történet sorainak száma"
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "OpenVPN példányok"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr "Áttekintés"
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Proxy timeout in seconds"
-msgstr "Proxy várakozási idő (másodperc)"
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr "Kapcsolat megtagadás ha nincs egyéni ügyfél konfiguráció"
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr "Távoli gép név vagy IP cím"
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr "Szolgáltatás"
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr "Indítás/Leállítás"
-
-msgid "Started"
-msgstr "Elindítva"
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr "Váltás haladó beállításokra »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr "TLS titkosító"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr "A használt eszköz típusa"
-
-msgid "Use fast LZO compression"
-msgstr "Gyors LZO tömörítés használata"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Egyedi címek használata /30 alhálózat helyett"
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr "Napló írása fájlba"
-
-msgid "Write process ID to file"
-msgstr "Folyamat azonosító (PID) fájlba írása"
-
-msgid "Write status to file every n seconds"
-msgstr "Állapot fájlba írása 'n' másodpercenként"
-
-msgid "no"
-msgstr "nem"
-
-msgid "tun/tap device"
-msgstr "tun/tap/ eszköz"
-
-msgid "tun/tap inactivity timeout"
-msgstr "tun/tap tétlenségi idő"
-
-msgid "yes (%i)"
-msgstr "igen (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Váltás alap beállításokra"
-
-#~ msgid "openvpn_%s"
-#~ msgstr "openvpn_%s"
-
-#~ msgid "openvpn_%s_desc"
-#~ msgstr "openvpn_%s_desc"
diff --git a/po/hu/p2pblock.po b/po/hu/p2pblock.po
deleted file mode 100644
index 4f1dffa..0000000
--- a/po/hu/p2pblock.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-01 19:16+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Block Time"
-msgstr "Blokkolási idő"
-
-msgid "Enable P2P-Block"
-msgstr "P2P-Block engedélyezése"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Layer7 protokollok"
-
-msgid "P2P-Block"
-msgstr "P2P-Block"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"A P2P-Block különféle peer-to-peer protokollok blokkolására szolgáló "
-"mechanizmus, a fehérlistában nem szereplő ügyfelek részére."
-
-msgid "Portrange"
-msgstr "Port tartomány"
-
-msgid "Whitelisted IPs"
-msgstr "Fehérlistás IP címek"
-
-msgid "seconds"
-msgstr "másodperc"
diff --git a/po/hu/p910nd.po b/po/hu/p910nd.po
deleted file mode 100644
index 4eb563b..0000000
--- a/po/hu/p910nd.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-28 16:41+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Bidirectional mode"
-msgstr "Kétirányú mód"
-
-msgid "Device"
-msgstr "Eszköz"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"A p910nd használata előtt szükséges az USB (kmod-usb-printer), vagy "
-"párhuzamos (kmod-lp) portokat támogató csomagok telepítése."
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Settings"
-msgstr "Beállítások"
-
-msgid "TCP listener port."
-msgstr "TCP port"
-
-msgid "enable"
-msgstr "Engedélyezés"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Nyomtató szerver"
-
-#~ msgid "port_help"
-#~ msgstr "port_súgó"
diff --git a/po/hu/pbx-voicemail.po b/po/hu/pbx-voicemail.po
deleted file mode 100644
index be25f0b..0000000
--- a/po/hu/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/hu/pbx.po b/po/hu/pbx.po
deleted file mode 100644
index de74ec9..0000000
--- a/po/hu/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/hu/polipo.po b/po/hu/polipo.po
deleted file mode 100644
index 931228e..0000000
--- a/po/hu/polipo.po
+++ /dev/null
@@ -1,202 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/hu/qos.po b/po/hu/qos.po
deleted file mode 100644
index 446f73c..0000000
--- a/po/hu/qos.po
+++ /dev/null
@@ -1,108 +0,0 @@
-# Generated from applications/luci-qos/luasrc/model/cbi/qos/qos.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-12-30 19:18+0200\n"
-"Last-Translator: romboyco <romboyco@gmail.com>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "Többletforgalom számítása"
-
-msgid "Classification Rules"
-msgstr "Besorolási szabályok"
-
-msgid "Classification group"
-msgstr "Besorolási csoport"
-
-msgid "Destination host"
-msgstr "Cél gép"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Download speed (kbit/s)"
-msgstr "Letöltési sebesség (kbit/s)"
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "Half-duplex"
-msgstr "Fél-duplex"
-
-msgid "Interfaces"
-msgstr "Interfészek"
-
-msgid "Internet Connection"
-msgstr "Internet kapcsolat"
-
-msgid "Number of bytes"
-msgstr "Bájtok száma"
-
-msgid "Ports"
-msgstr "Portok"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "Quality of Service"
-
-msgid "Service"
-msgstr "Szolgáltatás"
-
-msgid "Source host"
-msgstr "Forrás gép"
-
-msgid "Target"
-msgstr "Cél"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Feltöltési sebesség (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"A <abbr title=\"Quality of Service\">QoS</abbr> segítségével beállítható "
-"cím, portok vagy szolgáltatások alapján kiválasztott hálózati forgalom "
-"prioritása."
-
-msgid "all"
-msgstr "összes"
-
-msgid "allf"
-msgstr "allf"
-
-msgid "default"
-msgstr "alapértelmezett"
-
-msgid "express"
-msgstr "sürgős"
-
-msgid "low"
-msgstr "alacsony"
-
-msgid "normal"
-msgstr "normál"
-
-msgid "priority"
-msgstr "prioritás"
-
-msgid "qos_connbytes"
-msgstr "qos_connbytes"
diff --git a/po/hu/radvd.po b/po/hu/radvd.po
deleted file mode 100644
index 63ec168..0000000
--- a/po/hu/radvd.po
+++ /dev/null
@@ -1,367 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/hu/rrdtool.po b/po/hu/rrdtool.po
deleted file mode 100644
index 582c939..0000000
--- a/po/hu/rrdtool.po
+++ /dev/null
@@ -1,359 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-01 10:38+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Vezetéknélküli - Jel-zaj arány"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Zajszint"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Jelerősség"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Vezetéknélküli - Jel minőség"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Jelminőség"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: ICMP oda-vissza idő"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Tűzfal - feldolgozott csomagok"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "csomag/másodperc"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Lánc \\\"%di\\\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - %pi forgalma"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "bájt/másodperc"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "bájtok (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - %pi csomagjai"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "csomag/másodperc"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "feldolgozva (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "eldobva (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "hibák (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - multicast %pi-n"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "csomag/másodperc"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "csomagok"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - ütközések %pi-n"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "ütközés/másodperc"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Ütközések"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - hibák %pi-n"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "hiba/másodperc"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Folyamatok"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "folyamat/másodperc"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Folyamat %pi - processzor idő"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "jiffie-k"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "rendszer"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "felhasználó"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Folyamat %pi - szálak és folyamatok"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "darab"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Folyamat %pi - laphibák"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Laphibák"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "laphibák"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Folymat %pi - virtuális memória mérete"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bájtok"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "virtuális memória"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: %pi processzor kihasználtsága"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: %di forgalma"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "bájt/másodperc"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: %di csomagjai"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "csomag/másodperc"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: TCP kapcsolatok a %pi portra"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "kapcsolat/másodperc"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: lemezterület felhasználás %di-n"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "bájt"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: megszakítások"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "darab/másodperc"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: Rendszer terhelés"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Terhelés"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 perc"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 perc"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 perc"
diff --git a/po/hu/samba.po b/po/hu/samba.po
deleted file mode 100644
index 64d1e22..0000000
--- a/po/hu/samba.po
+++ /dev/null
@@ -1,84 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-06 10:56+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Vendég hozzáférés"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"A rendszerfelhasználók hálózati megosztáson keresztül hozzáférhetnek a home "
-"könyvtárukhoz."
-
-msgid "Allowed users"
-msgstr "Engedélyezett felhasználók"
-
-msgid "Create mask"
-msgstr "Létrehozási maszk"
-
-msgid "Description"
-msgstr "Leírás"
-
-msgid "Directory mask"
-msgstr "Könyvtár maszk"
-
-msgid "Edit Template"
-msgstr "Sablon szerkesztése"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-"Itt szerkesztheti a sablont, ami a végleges samba konfiguráció "
-"elkészítéséhez kerül felhasználásra."
-
-msgid "General Settings"
-msgstr "Általános beállítások"
-
-msgid "Hostname"
-msgstr "Gépnév"
-
-msgid "Mask for new directories"
-msgstr "Új könyvtárak maszkja"
-
-msgid "Mask for new files"
-msgstr "Új fájlok maszkja"
-
-msgid "Name"
-msgstr "Név"
-
-msgid "Network Shares"
-msgstr "Hálózati megosztások"
-
-msgid "Path"
-msgstr "Elérési út"
-
-msgid "Read-only"
-msgstr "Csak olvasható"
-
-msgid "Share home-directories"
-msgstr "Home könyvtárak megosztása"
-
-msgid "Shared Directories"
-msgstr "Megosztott könyvtárak"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Itt látható a /etc/samba/smb.conf.template file tartalma, ami a samba "
-"konfiguráció előállításához kerül felhasználásra. A pipe szimbólumok ('|') "
-"közé zárt értékek módosítása nem szükséges, az értéküket az általános "
-"beállítások fülről kapják."
-
-msgid "Workgroup"
-msgstr "Munkacsoport"
diff --git a/po/hu/splash.po b/po/hu/splash.po
deleted file mode 100644
index ccd7d6b..0000000
--- a/po/hu/splash.po
+++ /dev/null
@@ -1,308 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/hu/statistics.po b/po/hu/statistics.po
deleted file mode 100644
index 8777a49..0000000
--- a/po/hu/statistics.po
+++ /dev/null
@@ -1,684 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-30 09:26+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Action (target)"
-msgstr "Tevékenység (cél)"
-
-msgid "Add command for reading values"
-msgstr "Érték olvasására szolgáló parancs hozzáadása"
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr "Értesítési parancs hozzáadása"
-
-msgid "Base Directory"
-msgstr "Alapkönyvtár"
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr "CPU bővítmény beállítása"
-
-msgid "CSV Output"
-msgstr "CSV kimenet"
-
-msgid "CSV Plugin Configuration"
-msgstr "CSV bővítmény konfigurálása"
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr "Gyorsítótár ürítési időköz"
-
-msgid "Chain"
-msgstr "Lánc"
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Collectd beállítások"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"A collectd változatos forrásokból különféle bővítményeken keresztül történő "
-"adatgyűjtésre szolgáló kisméretű démon. Ezen az oldalon módosíthatja a "
-"collectd démon általános beállításait."
-
-msgid "Conntrack"
-msgstr "Conntrack"
-
-msgid "Conntrack Plugin Configuration"
-msgstr "Conntrack bővítmény beállítása"
-
-msgid "DF Plugin Configuration"
-msgstr "DF bővítmény beállítása"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "DNS bővítmény beállítása"
-
-msgid "Data collection interval"
-msgstr "Adatgyűjtési időszak"
-
-msgid "Datasets definition file"
-msgstr "Adatkészlet leíró fálj"
-
-msgid "Destination ip range"
-msgstr "Cél IP tartomány"
-
-msgid "Directory for collectd plugins"
-msgstr "collect bővítmények könyvtára"
-
-msgid "Directory for sub-configurations"
-msgstr "Al-beállítások könyvtára"
-
-msgid "Disk Plugin Configuration"
-msgstr "Lemez bővítmény beállítása"
-
-msgid "Disk Space Usage"
-msgstr "Felhasznált lemezterület"
-
-msgid "Disk Usage"
-msgstr "Lemezhasználat"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Időszak megjelenítése »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "E-Mail bővítmény beállítása"
-
-msgid "Email"
-msgstr "E-mail"
-
-msgid "Enable this plugin"
-msgstr "Bővítmény engedélyezése"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Exec bővítmény beállítása"
-
-msgid "Filter class monitoring"
-msgstr "Szűrő osztály figyelése"
-
-msgid "Firewall"
-msgstr "Tűzfal"
-
-msgid "Flush cache after"
-msgstr "Gyorsítótár ürítése ezután:"
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr "Grafikonok"
-
-msgid "Group"
-msgstr "Csoport"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Itt megadhatók külső parancsok amelyek a collectd által lesznek futtatva "
-"bizonyos értékeke beolvasására. Az értékek a szabványos kimenetről lesznek "
-"beolvasva."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Itt megadhatók külső parancsok amelyek a collectd által lesznek futtatva "
-"amikor bizonyos küszbértékek elérésre kerülnek. A hívást kiváltó értékek a "
-"meghívott programok szabványos bemenetére lesznek küldve."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Itt addhatók meg különböző feltételek, amelyek alapján a megfigyelt iptables "
-"szabályok kiválasztásra kerülnek."
-
-msgid "Host"
-msgstr "Gép"
-
-msgid "Hostname"
-msgstr "Gépnév"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-"Annak a gépnek a neve vagy IP címe ahonnan a txtinfo kimenete származik"
-
-msgid "IRQ Plugin Configuration"
-msgstr "IRQ bővítmény beállítása"
-
-msgid "Ignore source addresses"
-msgstr "Forrás címek figyelmen kívül hagyása"
-
-msgid "Incoming interface"
-msgstr "Bejövő interfész"
-
-msgid "Interface Plugin Configuration"
-msgstr "Interfész bővítmény beállítása"
-
-msgid "Interfaces"
-msgstr "Interfészek"
-
-msgid "Interrupts"
-msgstr "Megszakítások"
-
-msgid "Interval for pings"
-msgstr "Ping-ek közötti idő"
-
-msgid "Iptables Plugin Configuration"
-msgstr "Iptables bővítmény beállítása"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-"Bejelölés nélkül a figyelendő iterfészek automatikusan kerülnek "
-"kiválasztásra."
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr "Terhelés bővítmény beállítása"
-
-msgid "Maximum allowed connections"
-msgstr "Megengedett kapcsolatok maximális száma"
-
-msgid "Memory"
-msgstr "Memória"
-
-msgid "Memory Plugin Configuration"
-msgstr "Memória bővítmény beállítása"
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr "Eszközök figyelése"
-
-msgid "Monitor disks and partitions"
-msgstr "Lemezek és partíciók figyelése"
-
-msgid "Monitor filesystem types"
-msgstr "Fájlrendszer típusok figyelése"
-
-msgid "Monitor hosts"
-msgstr "Gépek figyelése"
-
-msgid "Monitor interfaces"
-msgstr "Interfészek figyelése"
-
-msgid "Monitor interrupts"
-msgstr "Megszakítások figyelése"
-
-msgid "Monitor local ports"
-msgstr "Helyi portok figyelése"
-
-msgid "Monitor mount points"
-msgstr "Csatolási pontok figyelése"
-
-msgid "Monitor processes"
-msgstr "Folyamatok figyelése"
-
-msgid "Monitor remote ports"
-msgstr "Távoli portok figyelése"
-
-msgid "Name of the rule"
-msgstr "A szabály neve"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Netlink bővítmény beállítása"
-
-msgid "Network"
-msgstr "Hálózat"
-
-msgid "Network Plugin Configuration"
-msgstr "Hálózat bővítmény beállítása"
-
-msgid "Network plugins"
-msgstr "Hálózati bővítmények"
-
-msgid "Network protocol"
-msgstr "Hálózati protokoll"
-
-msgid "Number of threads for data collection"
-msgstr "Az adatgyűjtő szálak száma"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr "OLSRd bővítmény beállítása"
-
-msgid "Only create average RRAs"
-msgstr "Csak átlag RRA-k létrehozása"
-
-msgid "Options"
-msgstr "Lehetőségek"
-
-msgid "Outgoing interface"
-msgstr "Kimenő interfész"
-
-msgid "Output plugins"
-msgstr "Kimeneti bővítmények"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Ping bővítmény beállítása"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Processes"
-msgstr "Folyamatok"
-
-msgid "Processes Plugin Configuration"
-msgstr "Folyamatok bővítmény beállítása"
-
-msgid "Processes to monitor separated by space"
-msgstr "Figyelendő folyamatok szóközzel elválasztva"
-
-msgid "Processor"
-msgstr "Processzor"
-
-msgid "Qdisc monitoring"
-msgstr "Qdisc figyelés"
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "RRDTool bővítmény beállítása"
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr "Parancsfájl"
-
-msgid "Seconds"
-msgstr "másodperc"
-
-msgid "Server host"
-msgstr "Kiszolgáló gép"
-
-msgid "Server port"
-msgstr "Kiszolgáló port"
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr "Socket fájlok"
-
-msgid "Socket group"
-msgstr "Socket csoport"
-
-msgid "Socket permissions"
-msgstr "Socket jogosultságok"
-
-msgid "Source ip range"
-msgstr "Forrás IP tartomány"
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-"Azt határozza meg, hogy az kapcsolatokról milyen információkat kell gyűjteni."
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-"Azt határozza meg, hogy az útvonalakról milyen információkat kell gyűjteni."
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-"Azt határozza meg, hogy a globális topológiáról milyen információkat kell "
-"gyűjteni."
-
-msgid "Statistics"
-msgstr "Statisztikák"
-
-msgid "Storage directory"
-msgstr "Tárolási könyvtár"
-
-msgid "Storage directory for the csv files"
-msgstr "A csv fájlok tárolási könyvtára"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Az adatok arányként történő tárolása abszolút értékek helyett"
-
-msgid "Stored timespans"
-msgstr "Tárolt időszakok"
-
-msgid "System Load"
-msgstr "Rendszerterhelés"
-
-msgid "System plugins"
-msgstr "Rendszer bővítmények"
-
-msgid "TCP Connections"
-msgstr "TCP kapcsolatok"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "TCPConns bővítény beállítása"
-
-msgid "TTL for network packets"
-msgstr "TTL a hálózati csomagokhoz"
-
-msgid "TTL for ping packets"
-msgstr "TTL a ping csomagokhoz"
-
-msgid "Table"
-msgstr "Táblázat"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-"Az OLSRd bővítmény a összekapcsolt hálózatokról olvas információkat az OLSRd "
-"txttinfo bővítményén keresztül."
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-"A conntrack bővítmény a nyomon követett kapcsolatok számáról gyűjt "
-"statisztikákat."
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-"A processzor bővítmény a processzorhasználatról gyűjt alapvető "
-"statisztikákat."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"A csv bővítmény segítségével az összegyűjtött adatok csv formátumú fájlba "
-"menthetők külső programmal történő további feldolgozás céljára."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"A df bővítmény a lemezterület használatáról gyűjt statisztikákat különböző "
-"eszközökön, csatolási pontokon vagy fájlrendszereken."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"A lemez bővítmény részletes használati statisztikákat készít a kiválasztott "
-"paticiókhoz vagy teljes lemezekhez."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"A DNS bővítmény részletes adatokat gyűjt a kiválasztott interfészek DNS-hez "
-"tartozó forgalmáról."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"Az exec bővítmény külső parancsokat indít értékek olvasására vagy külső "
-"folyamatok értesítésére bizonyos küszöbértékek elérése esetén."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr "A memória bővítmény a memórahasználatról gyűjt információkat."
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"A ping bővítmény ICMP echo kéréseket küld a kiválasztott gépekre és méri az "
-"oda-vissza eltelt időt minden gép esetében."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"A statisztikai csomag a <a href=\"http://collectd.org/index.shtml"
-"\">collectd</a> segédprogramon alapul és az <a href=\"http://oss.oetiker.ch/"
-"rrdtool/\">RRD Tool</a> segédprogramot használja a grafikonok elkészítésére "
-"az összegyűjtött adatokból."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"A tcpconns bővítmény a kiválasztott portokon lévő TCP kapcsolatokról gyűjt "
-"információkat."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"A unixsock bővítmény létrehoz egy unix socket-et melyen keresztül "
-"kiolvashatók az összegyűjtött adatok egy futó collectd-ből. "
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Ez a szakasz határozza meg, hogy a helyileg összegyűjtött adatokat melyik "
-"kiszolgálókra kell továbbítani."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "UnixSock bővítmény beállítása"
-
-msgid "Used PID file"
-msgstr "Használt PID fájl"
-
-msgid "User"
-msgstr "Felhasználó"
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr "Vezeték nélküli"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr "iwinfo vezeték nélküli bővítmény beállítása"
-
-msgid "e.g. br-ff"
-msgstr "pl. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "pl. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "pl. reject-with tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "max. 16 karakter"
-
-msgid "reduces rrd size"
-msgstr "csökkenti az rrd adatbázis méretét"
-
-msgid "seconds; multiple separated by space"
-msgstr "másodpercek; több szóközzel elválasztott érték is megadható"
-
-msgid "server interfaces"
-msgstr "kiszolgáló interfész"
-
-#~ msgid "Installed network plugins:"
-#~ msgstr "Telepített hálózati bővítmények:"
-
-#~ msgid "Installed output plugins:"
-#~ msgstr "Telepített kimeneti bővítmények:"
-
-#~ msgid ""
-#~ "Network plugins are used to collect information about open tcp "
-#~ "connections, interface traffic, iptables rules etc."
-#~ msgstr ""
-#~ "A hálózati bővítmények nyitott TCP kapcsolatok, interfész forgalom, iptables "
-#~ "szabályok és ehhez hasonló információk gyűjtésére használhatók."
-
-#~ msgid ""
-#~ "Output plugins provide different possibilities to store collected data. "
-#~ "It is possible to enable multiple plugin at one, for example to store "
-#~ "collected data in rrd databases and to transmit the data over the network "
-#~ "to other collectd instances."
-#~ msgstr ""
-#~ "A kimeneti bővítmények különféle lehetőségeket biztosítanak az összegyűjtött "
-#~ "adatok tárolásához. Lehetőség van többféle bővítmény egyidejű "
-#~ "engedélyezésére, például az összegyűjtött adatok RRD adatbázisban történő "
-#~ "tárolására és egyidejűleg hálózaton keresztül másik collectd példányhoz való "
-#~ "továbbítására."
-
-#~ msgid ""
-#~ "System plugins collecting values about system state and ressource usage "
-#~ "on the device.:"
-#~ msgstr ""
-#~ "A rendszer bővítmények a rendszer állapotáról és az erőforrások "
-#~ "használatáról gyűjtenek adatokat az eszközön."
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "A vezetéknélküli bővítmény vezetéknélküli jelerősségről, zajról és "
-#~ "minőségről gyűjt információkat."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Vezetéknélküli bővítmény beállítása"
diff --git a/po/hu/tinyproxy.po b/po/hu/tinyproxy.po
deleted file mode 100644
index 5c4dddd..0000000
--- a/po/hu/tinyproxy.po
+++ /dev/null
@@ -1,255 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/hu/transmission.po b/po/hu/transmission.po
deleted file mode 100644
index 040f838..0000000
--- a/po/hu/transmission.po
+++ /dev/null
@@ -1,300 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-17 20:30+0200\n"
-"PO-Revision-Date: 2012-04-26 14:30+0200\n"
-"Last-Translator: Gyula <pro564@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Alternative download speed"
-msgstr "Alternatív letöltési sebesség"
-
-msgid "Alternative speed enabled"
-msgstr "Alternatív sebesség engedélyezve"
-
-msgid "Alternative speed time begin"
-msgstr "Alternatív sebesség kezdő időpont"
-
-msgid "Alternative speed time day"
-msgstr "Alternatív sebesség napok"
-
-msgid "Alternative speed time end"
-msgstr "Alternatív sebesség záró időpont"
-
-msgid "Alternative speed timing enabled"
-msgstr "Alternatív sebesség időzítés engedélyezve"
-
-msgid "Alternative upload speed"
-msgstr "Alternatív feltöltési sebesség"
-
-msgid "Automatically start added torrents"
-msgstr "Hozzáadott torrentek automatikus indítása"
-
-msgid "Bandwidth settings"
-msgstr "Sávszélesség beállítások"
-
-msgid "Binding address IPv4"
-msgstr "Rögzített IPv4 cím"
-
-msgid "Binding address IPv6"
-msgstr "Rögzített IPv6 cím"
-
-msgid "Block list enabled"
-msgstr "Tiltólista engedélyezés"
-
-msgid "Blocklist URL"
-msgstr "Tiltólista URL"
-
-msgid "Blocklists"
-msgstr "Tiltólista"
-
-msgid "Cache size in MB"
-msgstr "Puffer méret (MB)"
-
-msgid "Config file directory"
-msgstr "Beállítási fájl könyvtára"
-
-msgid "DHT enabled"
-msgstr "DHT engedélyezve"
-
-msgid "Debug"
-msgstr "Nyomkövetés"
-
-msgid "Download directory"
-msgstr "Letöltési könyvtár"
-
-msgid "Download queue enabled"
-msgstr "Letöltési sor engedélyezve"
-
-msgid "Download queue size"
-msgstr "Letöltési sor mérete"
-
-msgid "Enable watch directory"
-msgstr "Figyelt könyvtár(aut. indítás)"
-
-msgid "Enabled"
-msgstr "Engedélyezve"
-
-msgid "Encryption"
-msgstr "Titkosítás"
-
-msgid "Error"
-msgstr "Hiba"
-
-msgid "Fast"
-msgstr "Gyors"
-
-msgid "Files and Locations"
-msgstr "Fájlok és helyek"
-
-msgid "Forced"
-msgstr "Erőltetve"
-
-msgid "Full"
-msgstr "Teljes"
-
-msgid "Global peer limit"
-msgstr "Globális partnerkorlát"
-
-msgid "Global settings"
-msgstr "Globális beálllítások"
-
-msgid "Idle seeding limit"
-msgstr "Üresjárati seedkorlát"
-
-msgid "Idle seeding limit enabled"
-msgstr "Üresjárati seedkorlát engedélyezése"
-
-msgid "Incomplete directory"
-msgstr "Befejezetlen fájlok mappája"
-
-msgid "Incomplete directory enabled"
-msgstr "Befejezetlen fájlok mappájának engedélyezése"
-
-msgid "Info"
-msgstr "Infó"
-
-msgid "LPD enabled"
-msgstr "LPD engedélyezése"
-
-msgid "Lazy bitfield enabled"
-msgstr "Lazy bitfield engedélyezése"
-
-msgid "Message level"
-msgstr "Naplózási szint"
-
-msgid "Miscellaneous"
-msgstr "Egyéb"
-
-msgid "None"
-msgstr "Nincs"
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-"Szám/bitmező. Kezdj 0-val, és minden napnál, amikor az ütemezőt be akarod "
-"kapcsolni, adj hozzá egy értéket. Vasárnap - 1, Hétfő - 2, Kedd - 4, Szerda "
-"- 8, Csütörtök - 16, Péntek - 32, Szombat - 64"
-
-msgid "Off"
-msgstr "Ki"
-
-msgid "Open Web Interface"
-msgstr "Webes felület megnyitása"
-
-msgid "PEX enabled"
-msgstr "PEX engedélyezése"
-
-msgid "Peer Port settings"
-msgstr "Partner port beállítások"
-
-msgid "Peer congestion algorithm"
-msgstr "Partner torlódási algoritmus"
-
-msgid "Peer limit per torrent"
-msgstr "Torrentenkénti partnerkorlát"
-
-msgid "Peer port"
-msgstr "Partner port"
-
-msgid "Peer port random high"
-msgstr "Véletlenszerű magas partner port"
-
-msgid "Peer port random low"
-msgstr "Véletlenszerű alacsony partner port"
-
-msgid "Peer port random on start"
-msgstr "Véletlenszerű partner port induláskor"
-
-msgid "Peer settings"
-msgstr "Partner beállítások"
-
-msgid "Peer socket tos"
-msgstr "Partner szolgáltatás típus"
-
-msgid "Port forwarding enabled"
-msgstr "Portátirányítás engedélyezése"
-
-msgid "Preferred"
-msgstr "Előnyben részesített"
-
-msgid "Prefetch enabled"
-msgstr "Előtöltés engedélyezése"
-
-msgid "Queue stalled enabled"
-msgstr "Elakadt sor engedélyezése"
-
-msgid "Queue stalled minutes"
-msgstr "Elakadás időtartama"
-
-msgid "Queueing"
-msgstr "Sorbaállítás"
-
-msgid "RPC URL"
-msgstr "RPC URL"
-
-msgid "RPC authentication required"
-msgstr "RPC azonosítás megkövetelése"
-
-msgid "RPC bind address"
-msgstr "RPC cím rögzítése"
-
-msgid "RPC enabled"
-msgstr "RPC engedélyezése"
-
-msgid "RPC password"
-msgstr "RPC jelszó"
-
-msgid "RPC port"
-msgstr "RPC port"
-
-msgid "RPC settings"
-msgstr "RPC beállítások"
-
-msgid "RPC username"
-msgstr "RPC felhasználónév"
-
-msgid "RPC whitelist"
-msgstr "RPC fehérlista"
-
-msgid "RPC whitelist enabled"
-msgstr "RPC fehérlista engedélyezése"
-
-msgid "Ratio limit"
-msgstr "Aránykorlát"
-
-msgid "Ratio limit enabled"
-msgstr "Aránykorlát engedélyezése"
-
-msgid "Rename partial files"
-msgstr "Félkész fájlok átnevezése"
-
-msgid "Run daemon as user"
-msgstr "Daemon indítása, mint"
-
-msgid "Scheduling"
-msgstr "Ütemezés"
-
-msgid "Scrape paused torrents enabled"
-msgstr "Álló torrentek adatainak lekérdezése"
-
-msgid "Script torrent done enabled"
-msgstr "Letöltés utáni script engedélyezése"
-
-msgid "Script torrent done filename"
-msgstr "Letöltés utáni script fájlneve"
-
-msgid "Seed queue enabled"
-msgstr "Feltöltési sor engedélyezése"
-
-msgid "Seed queue size"
-msgstr "Feltöltési sor mérete"
-
-msgid "Speed limit down"
-msgstr "Letöltési korlát"
-
-msgid "Speed limit down enabled"
-msgstr "Letöltési korlát engedélyezése"
-
-msgid "Speed limit up"
-msgstr "Feltöltési korlát"
-
-msgid "Speed limit up enabled"
-msgstr "Feltöltési korlát engedélyezése"
-
-msgid "Transmission"
-msgstr "Transmission"
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-"A Transmission daemon egy egyszerű bittorrent kliens, itt módosíthatod a "
-"beállításait."
-
-msgid "Trash original torrent files"
-msgstr "Eredeti torrent fájlok eldobása"
-
-msgid "Upload slots per torrent"
-msgstr "Feltöltési szálak torrentenként"
-
-msgid "Watch directory"
-msgstr "Figyelt könyvtár"
-
-msgid "in minutes from midnight"
-msgstr "percek száma éjféltől"
-
-msgid "preallocation"
-msgstr "előre lefoglalás"
-
-msgid "uTP enabled"
-msgstr "uTP engedélyezése"
diff --git a/po/hu/upnp.po b/po/hu/upnp.po
deleted file mode 100644
index c5dbe2e..0000000
--- a/po/hu/upnp.po
+++ /dev/null
@@ -1,155 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-31 18:32+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"Az ACL-ek határozzák meg, hogy melyik külső portok melyik belső portokra és "
-"címekre kerülhetnek továbbításra"
-
-msgid "Action"
-msgstr "Művelet"
-
-msgid "Active UPnP Redirects"
-msgstr "Aktív UPnP átirányítások"
-
-msgid "Advanced Settings"
-msgstr "Haladó beállítások"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-"Kizárólag a kérést küldő IP címre történő továbbítás hozzáadásának "
-"engedélyezése"
-
-msgid "Announced model number"
-msgstr "Közzétett modelszám"
-
-msgid "Announced serial number"
-msgstr "Közzétett sorozatszám"
-
-msgid "Clean rules interval"
-msgstr "Szabály törlési időköz"
-
-msgid "Clean rules threshold"
-msgstr "Szabály törlési küszöbérték"
-
-msgid "Client Address"
-msgstr "Ügyfél cím"
-
-msgid "Client Port"
-msgstr "Ügyfél port"
-
-msgid "Collecting data..."
-msgstr "Adatok összegyűjtése..."
-
-msgid "Comment"
-msgstr "Megjegyzés"
-
-msgid "Delete Redirect"
-msgstr "Átirányítás törlése"
-
-msgid "Device UUID"
-msgstr "Eszköz UUID"
-
-msgid "Downlink"
-msgstr "Letöltés"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "NAT-PMP funkció engedélyezése"
-
-msgid "Enable UPnP functionality"
-msgstr "UPnP funkció engedélyezése"
-
-msgid "Enable additional logging"
-msgstr "További naplózás engedélyezése"
-
-msgid "Enable secure mode"
-msgstr "Biztonságos mód engedélyezése"
-
-msgid "External Port"
-msgstr "Külső port"
-
-msgid "External ports"
-msgstr "Külső portok"
-
-msgid "General Settings"
-msgstr "Általános beállítások"
-
-msgid "Internal addresses"
-msgstr "Belső címek"
-
-msgid "Internal ports"
-msgstr "Belső portok"
-
-msgid "MiniUPnP ACLs"
-msgstr "MiniUPnP ACL-ek"
-
-msgid "MiniUPnP settings"
-msgstr "MiniUPnP beállítások"
-
-msgid "Notify interval"
-msgstr "Értesítési időköz"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Presentation URL"
-msgstr "Bemutatkozó URL"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "További nyomkövetési információk írása a rendszernaplóba."
-
-msgid "Report system instead of daemon uptime"
-msgstr "A démon helyett a rendszer működési idejét jeleníti meg"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "UPnP és NAT-PMP szolgáltatás elindítása"
-
-msgid "There are no active redirects."
-msgstr "Nincsenek aktív átírányítások."
-
-msgid "UPNP"
-msgstr "UPNP"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"Az UPnP lehetővé teszi a hálózatban lévő ügyfelek számára hogy automatikusan "
-"beállítsák a routert."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"Az UPnP lehetővé teszi a hálózatban lévő ügyfelek számára hogy automatikusan "
-"beállítsák a routert."
-
-msgid "UPnP lease file"
-msgstr "UPnP bérlet fájl"
-
-msgid "Universal Plug & Play"
-msgstr "Univerzális Plug and Play"
-
-msgid "Uplink"
-msgstr "Feltöltés"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Érték KByte/s-ban, csak tájékoztató jellegű"
-
-msgid "enable"
-msgstr "engedélyezés"
diff --git a/po/hu/ushare.po b/po/hu/ushare.po
deleted file mode 100644
index 6efa521..0000000
--- a/po/hu/ushare.po
+++ /dev/null
@@ -1,53 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-13 18:29+0200\n"
-"Last-Translator: Gábor <vargalex@freemail.hu>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "Megosztott könyvtárak"
-
-msgid "Disable telnet console"
-msgstr "Telnet-konzol tiltása"
-
-msgid "Disable webinterface"
-msgstr "Web felület tiltása"
-
-msgid "Enable"
-msgstr "Engedélyezés"
-
-msgid "Interface"
-msgstr "Interfész"
-
-msgid "Options"
-msgstr "Opciók"
-
-msgid "Servername"
-msgstr "Szerver név"
-
-msgid "Settings"
-msgstr "Beállítások"
-
-msgid "Username"
-msgstr "Felhasználónév"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"Az uShare egy UPnP (TM) A/V & DLNA média szerver. A szerver komponenst "
-"valósítja meg, amely információt szolgáltat az elérhető multimédia fájlokról "
-"az uPnP média eszközök számára."
diff --git a/po/hu/uvc_streamer.po b/po/hu/uvc_streamer.po
deleted file mode 100644
index d38d667..0000000
--- a/po/hu/uvc_streamer.po
+++ /dev/null
@@ -1,43 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-30 09:02+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Másodpercenkénti képkockák"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Felbontás"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Beállítások"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Webkamera stream-elés"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Állítsa be a Linux-UVC kompatibilis webkameráját. Nyissa meg böngészővel "
-"pl.  <a href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/hu/vnstat.po b/po/hu/vnstat.po
deleted file mode 100644
index b198c5d..0000000
--- a/po/hu/vnstat.po
+++ /dev/null
@@ -1,65 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr "Beállítások"
-
-msgid "Daily traffic"
-msgstr "Napi forgalom"
-
-msgid "Graphs"
-msgstr "Grafikonok"
-
-msgid "Hourly traffic"
-msgstr "Óránkénti forgalom"
-
-msgid "Monitor selected interfaces"
-msgstr "Kiválasztott interfészek figyelése"
-
-msgid "Monthly traffic"
-msgstr "Havi forgalom"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Adatbázis még nem lett beállítva. Engedélyezze egy vagy több interfész "
-"figyelését a VnStat beállításoknál."
-
-msgid "Restart VnStat"
-msgstr "VnStat újraíndítása"
-
-msgid "Summary display"
-msgstr "Összefoglaló nézet"
-
-msgid "Top 10 display"
-msgstr "Top 10 nézet"
-
-msgid "Update »"
-msgstr "Frissítés »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "VnStat grafikonok"
-
-msgid "VnStat Traffic Monitor"
-msgstr "VnStat Forgalom Figyelő"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat egy hálózati forgalom figyelő alkalmazás Linux alá ami naplózza a "
-"kiválasztott interfész(ek) hálózati forgalmát."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "A VnStat szolgáltatás újra lett índítva."
diff --git a/po/hu/voice_core.po b/po/hu/voice_core.po
deleted file mode 100644
index 07eaa14..0000000
--- a/po/hu/voice_core.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-01 09:34+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Phones"
-msgstr "Telefonok"
-
-msgid "Voice"
-msgstr "Hang"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/hu/voice_diag.po b/po/hu/voice_diag.po
deleted file mode 100644
index 79d2379..0000000
--- a/po/hu/voice_diag.po
+++ /dev/null
@@ -1,30 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Diagnostics"
-msgstr "Diagnosztika"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Az eszközön elérhető diagnosztikai lehetőségek a telepített összetevőktől "
-"függenek."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Ez alatt a menüpont alatt olyan lehetőségek vannak, amelyek lehetővé teszik, "
-"hogy beállítsa és tesztelje az eszköz hangrendszerének a működését. Ezek "
-"diagnosztikaként ismertek."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/hu/watchcat.po b/po/hu/watchcat.po
deleted file mode 100644
index 4615993..0000000
--- a/po/hu/watchcat.po
+++ /dev/null
@@ -1,56 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-23 13:09+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Forced reboot delay"
-msgstr "Kényszerített újraindítás késleltetése"
-
-msgid "Host address to ping"
-msgstr "Pingelendő szerver címe"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/hu/wol.po b/po/hu/wol.po
deleted file mode 100644
index a3b18cc..0000000
--- a/po/hu/wol.po
+++ /dev/null
@@ -1,58 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2012-04-06 10:42+0200\n"
-"Last-Translator: juhosg <juhosg@openwrt.org>\n"
-"Language-Team: none\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Szórás az összes interfészen"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-"Válassza ki a felélesztendő gépet, vagy adja meg a haszálandó egyedi MAC "
-"címet"
-
-msgid "Host to wake up"
-msgstr "Felélesztendő gép"
-
-msgid "Network interface to use"
-msgstr "Használandó interfész"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Néha csak az egyik eszköz működik. Ha valamelyik nem működik, próbálja ki a "
-"másikat."
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-"Megadja azt az interfészt amelyiken keresztül a WoL csomag kiküldésre kerül"
-
-msgid "Starting WoL utility:"
-msgstr "WoL segédprogram elindítása:"
-
-msgid "Wake on LAN"
-msgstr "Felélesztés hálózaton keresztül"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"A felélesztés hálózaton keresztül a helyi hálózatban lévő számítógépek "
-"távoli elindítására szolgáló módszer."
-
-msgid "Wake up host"
-msgstr "Gép felélesztése"
-
-msgid "WoL program"
-msgstr "WoL program"
diff --git a/po/hu/wshaper.po b/po/hu/wshaper.po
deleted file mode 100644
index d9d843c..0000000
--- a/po/hu/wshaper.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Downlink"
-msgstr "Letöltés"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Letöltési sebesség kbit/másodberc-ben"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Gép vagy hálózat (CIDR jelöléssel)"
-
-msgid "Interface"
-msgstr "Interfész"
-
-msgid "Low priority destination ports"
-msgstr "Alacsony prioritású cél portok"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Alacson prioritású cél gépek"
-
-msgid "Low priority hosts (Source)"
-msgstr "Alacsony prioritású forrás gépek"
-
-msgid "Low priority source ports"
-msgstr "Alacson prioritású forrás portok"
-
-msgid "Uplink"
-msgstr "Feltöltés"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Feltöltési sebesség kbit/másodperc-ben"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Wondershaper beállítások"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"A Wondershaper 'traffic shaping'-et használatával biztosítja az interaktív "
-"forgalom alacsony késleletetését még akkor is ha az internet kapcsolat "
-"erősen leterhelt."
diff --git a/po/it/ahcp.po b/po/it/ahcp.po
deleted file mode 100644
index 3b673cc..0000000
--- a/po/it/ahcp.po
+++ /dev/null
@@ -1,113 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-03 12:53+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "Server AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP è un protocollo di configurazione automatica per reti IPv6 e dual-stack "
-"IPv6/IPv4 progettato per essere usato al posto del router discovery e DHCP "
-"su reti dove è difficile o impossibile configurare un server all'interno di "
-"ogni dominio di broadcast, per esempio reti ad-hoc mobili."
-
-msgid "Active AHCP Leases"
-msgstr "Lease AHCP Attivi"
-
-msgid "Address"
-msgstr "Indirizzo"
-
-msgid "Advanced Settings"
-msgstr "Impostazioni Avanzate"
-
-msgid "Age"
-msgstr "Età"
-
-msgid "Announced DNS servers"
-msgstr "Server DNS indicati"
-
-msgid "Announced NTP servers"
-msgstr "Server NTP indicati"
-
-msgid "Announced prefixes"
-msgstr "Prefissi indicati"
-
-msgid "Collecting data..."
-msgstr "Raccolta dei dati..."
-
-msgid "Forwarder"
-msgstr "Mittente"
-
-msgid "General Setup"
-msgstr "Setup Generale"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 only"
-msgstr "Solo IPv4"
-
-msgid "IPv6 only"
-msgstr "Solo IPv6"
-
-msgid "Lease directory"
-msgstr "Directory di Lease"
-
-msgid "Lease validity time"
-msgstr "Tempo di validità del Lease"
-
-msgid "Log file"
-msgstr "File di log"
-
-msgid "Multicast address"
-msgstr "Indirizzo Multicast"
-
-msgid "Operation mode"
-msgstr "Modalità di funzionamento"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Protocol family"
-msgstr "Protocollo famiglia"
-
-msgid "Served interfaces"
-msgstr "Interfacce servite"
-
-msgid "Server"
-msgstr "Server"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Specifica i server NTP IPv4 e IPv6 annunciati"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Specifica il server dei nomi IPv4 e IPv6"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Specifica i prefissi delle reti IPv4 e IPv6 in notazione CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr "Il servizio AHCP non è in esecuzione."
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "Il servizio AHCP è in esecuzione con ID %s."
-
-msgid "There are no active leases."
-msgstr "Non ci sono leases attivi."
-
-msgid "Unique ID file"
-msgstr "File degli Unique ID"
diff --git a/po/it/asterisk.po b/po/it/asterisk.po
deleted file mode 100644
index 9eb24da..0000000
--- a/po/it/asterisk.po
+++ /dev/null
@@ -1,162 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-04-19 23:40+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Asterisk Opzioni Generali"
-
-#~ msgid "AGI directory"
-#~ msgstr "AGI directory"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Cache dei file audio registrati durante la registrazione"
-
-#~ msgid "Debug Level"
-#~ msgstr "Livello di debug"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Disattivare alcuni avvis"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Effettua il core dump al crash"
-
-#~ msgid "High Priority"
-#~ msgstr "Alta Priorità"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Usa temporizzazione interna"
-
-#~ msgid "Log directory"
-#~ msgstr "Accedi alla directory"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Numero massimo di chiamate consentite"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Smettere di accettare carico massimo di nuove chiamate"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Disabilitare la console dei colori"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Cache directori files suoni"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Prefisso UniquID con il nome di sistema"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "Costruire percorsi di transcodifica via SLINEAR, non direttamente"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Livello verbose"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Sezione dialplan"
-
-#~ msgid "include"
-#~ msgstr "include"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Estensione Dialplan"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Opzioni generali Dialplan"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Permettere il trasferimento"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Cancella le variabili globali"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Conferenza Dialplan"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "Aggiungere il prefisso corrispondente per Dialplans"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr ""
-#~ "Prefisso (0) per aggiungere / rimuovere a / da numeri internazionali"
-
-#~ msgid "localzone"
-#~ msgstr "localzone"
-
-#~ msgid "Connection to use"
-#~ msgstr "Connessione da utilizzare"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Caratteristica chiave delle mappe"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Chiave per disconnettere una chiamata"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Chiave di riserva per chiamata"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Riserva futura"
-
-#~ msgid "ADSI Park"
-#~ msgstr "Riserva ADSI"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Ascolta il tono di cortesia per"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Abilita la sosta"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Ora di sosta (in secondi)"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "Gamma di estensioni per la sosta di chiamata"
-
-#~ msgid "Pickup extension"
-#~ msgstr "Estensione Pickup"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Secondi di attesa tra le cifre per il trasferimento"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "Suono quando il trasferimento non ha partecipato"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Ricarica Hardware Config"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Metodo per riavviare"
-
-#~ msgid "Parameter"
-#~ msgstr "Parametro"
-
-#~ msgid "Option type"
-#~ msgstr "Tipo di opzione"
-
-#~ msgid "User name"
-#~ msgstr "Usare il nome"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Opzione generale per IAX"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Lasciare il codec"
-
-#~ msgid "Static"
-#~ msgstr "Statico"
-
-#~ msgid "Write Protect"
-#~ msgstr "Protezione da scrittura"
-
-#~ msgid "Message Format"
-#~ msgstr "Formato messaggio"
diff --git a/po/it/base.po b/po/it/base.po
deleted file mode 100644
index 3e9cb3e..0000000
--- a/po/it/base.po
+++ /dev/null
@@ -1,3750 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2013-02-10 19:40+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d finestra in minuti , %d secondi intervallo)"
-
-msgid "(%s available)"
-msgstr "(%s disponibile)"
-
-msgid "(empty)"
-msgstr "(vuoto)"
-
-msgid "(no interfaces attached)"
-msgstr "(nessuna interfaccia collegata)"
-
-msgid "-- Additional Field --"
-msgstr "-- Campo aggiuntivo --"
-
-msgid "-- Please choose --"
-msgstr "-- Per favore scegli --"
-
-msgid "-- custom --"
-msgstr "-- personalizzato --"
-
-msgid "1 Minute Load:"
-msgstr "Carico in 1 minuto:"
-
-msgid "15 Minute Load:"
-msgstr "Carico in 15 minut:"
-
-msgid "40MHz 2nd channel above"
-msgstr "secondo canale superiore a 40MHz"
-
-msgid "40MHz 2nd channel below"
-msgstr "secondo canale inferiore a 40MHz"
-
-msgid "5 Minute Load:"
-msgstr "Carico in 5 minuti:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-"<abbr title=\"Servizio basilare di impostazione Identificatore\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "Richiesta porta <abbr title=\"Sistema Nome Dominio\">DNS</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "Porta Server <abbr title=\"Sistema Nome Dominio\">DNS</abbr>"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"<abbr title=\"Sistema Nome Dominio\">DNS</abbr> I server che verranno "
-"interrogati nell'ordine del resolv file"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Impostazione Identificatore Servizio Esteso\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Indirizzo <abbr title=\"Protocollo Internet Versione 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "Gateway <abbr title=\"Protocollo Internet Versione 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-"Maschera di rete <abbr title=\"Protocollo Internet Versione 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"Indirizzo <abbr title=\"Protocollo Internet Versione 6\">IPv6</abbr> o rete "
-"(CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "Gateway <abbr title=\"Protocollo Internet Versione 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Configurazione <abbr title=\"Diodo ad Emissione di Luce\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Diodo ad Emissione di Luce\">LED</abbr> Nome"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Indirizzo <abbr title=\"Controllo Accesso Supporto\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"maximal\">Max.</abbr> Contratto <abbr title=\"Configurazione "
-"Protocollo Host Dinamico\">DHCP</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"maximal\">Max.</abbr> dimensione pacchetti <abbr "
-"title=\"Estensione Meccanismi per il Sistema dei Nomi dei "
-"Domini\">EDNS0</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">Max.</abbr> Richiesta in uso"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Accoppiata: %s / Gruppo: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "Supporto AR"
-
-msgid "ARP retry threshold"
-msgstr "riprova soglia ARP"
-
-msgid "ATM Bridges"
-msgstr "Ponti ATM"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "Identificatore Canale Virtuale ATM (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "Identificatore Percorso Virtuale ATM (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"I ponti ATM incapsulano connessioni in AAL5, in modo che i dispositivi "
-"virtuali si possono interfacciare con le reti virtuali Linux in congiunzione "
-"con la comunicazione DHCP o PPP dell'ISP."
-
-msgid "ATM device number"
-msgstr "Numero dispositivo ATM "
-
-msgid "Accept router advertisements"
-msgstr "Accetta gli annunci di router"
-
-msgid "Access Concentrator"
-msgstr "Accesso Concentratore"
-
-msgid "Access Point"
-msgstr "Punto di Accesso"
-
-msgid "Action"
-msgstr "Azione"
-
-msgid "Actions"
-msgstr "Azioni"
-
-msgid "Activate this network"
-msgstr "Attiva questa rete"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Instradamento <abbr title=\"Protocollo Internet Versione 4\">IPv4</abbr> "
-"attivo"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Instradamento <abbr title=\"Protocollo Internet Versione 6\">IPv6</abbr> "
-"attivo"
-
-msgid "Active Connections"
-msgstr "Connessioni attive"
-
-msgid "Active DHCP Leases"
-msgstr "Attiva contratti DHCP"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Attiva contratti DHCPv6"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Aggiungi"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Aggiungere il suffisso di dominio locale ai nomi serviti dal file hosts"
-
-msgid "Add new interface..."
-msgstr "Aggiungi nuova interfaccia..."
-
-msgid "Additional Hosts files"
-msgstr "File Hosts Aggiuntivo"
-
-msgid "Address"
-msgstr "Indirizzo"
-
-msgid "Address to access local relay bridge"
-msgstr "Indirizzo per accedere al ponte locale di trasmissione"
-
-msgid "Administration"
-msgstr "Amministrazione"
-
-msgid "Advanced Settings"
-msgstr "Opzioni Avanzate"
-
-msgid "Advertise IPv6 on network"
-msgstr "Annuncia IPv6 sulla rete"
-
-msgid "Advertised network ID"
-msgstr "ID di Rete Annunciato"
-
-msgid "Alert"
-msgstr "Avviso"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Permetti autenticazione <abbr title=\"Secure Shell\">SSH</abbr> tramite "
-"password"
-
-msgid "Allow all except listed"
-msgstr "Consenti tutti tranne quelli nell'elenco"
-
-msgid "Allow listed only"
-msgstr "Consenti solo quelli nell'elenco"
-
-msgid "Allow localhost"
-msgstr "Permetti localhost"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Permetti agli host remoti di connettersi tramite ssh reindirizzando le porte"
-
-msgid "Allow root logins with password"
-msgstr "Permetti l'accesso a root con password"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Abilita l'utente root con l'accesso via password"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Permetti le risposte upstream nell'intervallo 127.0.0.0/8, per esempio nei "
-"servizi RBL"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Intervallo permesso 1-65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-"Usare sempre i canali a 40MHz anche se con le sovrapposizioni dei canali "
-"secondari. Utilizzando questa opzione non è conforme con gli standard IEEE "
-"802.11n-2009!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Sarà creata una rete aggiuntiva se lasci questo senza spunta."
-
-msgid "Antenna 1"
-msgstr "Antenna 1"
-
-msgid "Antenna 2"
-msgstr "Antenna 2"
-
-msgid "Antenna Configuration"
-msgstr "Configurazione dell'Antenna"
-
-msgid "Any zone"
-msgstr "Qualsiasi Zona"
-
-msgid "Apply"
-msgstr "Applica"
-
-msgid "Applying changes"
-msgstr "Applica modifiche"
-
-msgid "Assign interfaces..."
-msgstr "Assegna Interfacce..."
-
-msgid "Associated Stations"
-msgstr "Dispositivi Wi-Fi connessi"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Dispositivo Wireless Atheros 802.11%s"
-
-msgid "Authentication"
-msgstr "Autenticazione PEAP"
-
-msgid "Authoritative"
-msgstr "Autoritativo"
-
-msgid "Authorization Required"
-msgstr "Autorizzazione richiesta"
-
-msgid "Auto Refresh"
-msgstr "Aggironamento Automatico"
-
-msgid "Available"
-msgstr "Disponibili"
-
-msgid "Available packages"
-msgstr "Pacchetti disponibili"
-
-msgid "Average:"
-msgstr "Media:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Indietro"
-
-msgid "Back to Overview"
-msgstr "Ritorna alla panoramica"
-
-msgid "Back to configuration"
-msgstr "Indietro alla configurazione"
-
-msgid "Back to overview"
-msgstr "Ritorna alla panoramica"
-
-msgid "Back to scan results"
-msgstr "Ritorno ai risultati della scansione"
-
-msgid "Background Scan"
-msgstr "Scansione in background"
-
-msgid "Backup / Flash Firmware"
-msgstr "Copia di Sicurezza / Flash Firmware"
-
-msgid "Backup / Restore"
-msgstr "Copia di Sicurezza / Ripristina"
-
-msgid "Backup file list"
-msgstr "Elenco dei file di cui effettuare una copia di sicurezza"
-
-msgid "Bad address specified!"
-msgstr "E' stato specificato un indirizzo errato!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Di seguito l'elenco dei file di cui effettuare la copia di sicurezza. Essa è "
-"composta dai file di configurazione modificati installati da opkg, file di "
-"base essenziali e i file di backup definiti dall'utente."
-
-msgid "Bitrate"
-msgstr "Bitrate"
-
-msgid "Bogus NX Domain Override"
-msgstr "Ignora Dominio Bogus NX"
-
-msgid "Bridge"
-msgstr "Ponte"
-
-msgid "Bridge interfaces"
-msgstr "Interfacce Ponte"
-
-msgid "Bridge unit number"
-msgstr "Numero Unità Ponte"
-
-msgid "Bring up on boot"
-msgstr "Attivare all'avvio"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Dispositivo Wireless Broadcom 802.11%s"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Dispositivo Wireless Broadcom BCM%04x 802.11"
-
-msgid "Buffered"
-msgstr "Buffered"
-
-msgid "Buttons"
-msgstr "Pulsanti"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "Uso CPU (%)"
-
-msgid "Cached"
-msgstr "Nella cache"
-
-msgid "Cancel"
-msgstr "Annulla"
-
-msgid "Chain"
-msgstr "Catena"
-
-msgid "Changes"
-msgstr "Modifiche"
-
-msgid "Changes applied."
-msgstr "Modifiche applicate."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Cambia la password di amministratore per accedere al dispositivo"
-
-msgid "Channel"
-msgstr "Canale"
-
-msgid "Check"
-msgstr "Verifica"
-
-msgid "Checksum"
-msgstr "Checksum"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Scegli la zona del firewall che si desidera assegnare a questa interfaccia. "
-"Selezionare <em>non specificato</em> per rimuovere l'interfaccia dalla zona "
-"associata o compilare il campo <em>crea</em> per definire una nuova zona e "
-"collegare l'interfaccia ad esso."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Segliere la/le rete/reti a cui vuoi collegare questa interfaccia wireless o "
-"riempire il campo <em>crea<em> per definire una nuova rete."
-
-msgid "Cipher"
-msgstr "Cifratura"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Premi su \"Genera archivio\" per scaricare un archivio tar di backup dei file "
-"di configurazione attuali. Per ripristinare il firmware al suo stato "
-"iniziale premi \"Esegui RIpristino\" (solo per firmware basati su squashfs)."
-
-msgid "Client"
-msgstr "Cliente"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "ID Cliente da inviare all'interno della richiesta DHCP"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Chiudi le connessioni inattive dopo x secondi, usa 0 per connessioni "
-"persistenti"
-
-msgid "Close list..."
-msgstr "Scegliere dall'elenco..."
-
-msgid "Collecting data..."
-msgstr "Raccolgo i dati..."
-
-msgid "Command"
-msgstr "Comando"
-
-msgid "Common Configuration"
-msgstr "Configurazioni Comuni"
-
-msgid "Compression"
-msgstr "Compressione"
-
-msgid "Configuration"
-msgstr "Configurazione"
-
-msgid "Configuration applied."
-msgstr "Configurazione salvata."
-
-msgid "Configuration files will be kept."
-msgstr "I file di configurazione verranno mantenuti."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Configura questo mount come memoria di sovrapposizione per il blocco-extroot"
-
-msgid "Confirmation"
-msgstr "Conferma"
-
-msgid "Connect"
-msgstr "Connetti"
-
-msgid "Connected"
-msgstr "Connesso"
-
-msgid "Connection Limit"
-msgstr "Limite connessioni"
-
-msgid "Connections"
-msgstr "Connessioni"
-
-msgid "Country"
-msgstr "Nazione"
-
-msgid "Country Code"
-msgstr "Codice Nazione"
-
-msgid "Cover the following interface"
-msgstr "Coprire la seguente interfaccia"
-
-msgid "Cover the following interfaces"
-msgstr "Coprire le seguenti interfacce"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Crea / Assegna zona firewall"
-
-msgid "Create Interface"
-msgstr "Crea Interfaccia"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Crea un ponte tra interfaccie multiple"
-
-msgid "Critical"
-msgstr "Critico"
-
-msgid "Cron Log Level"
-msgstr "Livello di log del Cron"
-
-msgid "Custom Interface"
-msgstr "Interfaccia personalizzata"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Personalizza la configurazione dei <abbr title=\"Light Emitting "
-"Diode\">LED</abbr> del sistema se possibile."
-
-msgid "DHCP Leases"
-msgstr "Contratta DHCP"
-
-msgid "DHCP Server"
-msgstr "Server DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP e DNS"
-
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-msgid "DHCP-Options"
-msgstr "Opzioni DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "Locazioni DHCPv6"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Inoltri DNS"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Debug"
-
-msgid "Default %d"
-msgstr "Predefinito %d"
-
-msgid "Default gateway"
-msgstr "Gateway predefinito"
-
-msgid "Default state"
-msgstr "Stato Predefinito"
-
-msgid "Define a name for this network."
-msgstr "Definisci un nome per questa rete."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Definisci opzioni DHCP aggiuntive, per esempio "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" fornisce differenti server DNS ai "
-"client."
-
-msgid "Delete"
-msgstr "Elimina"
-
-msgid "Delete this interface"
-msgstr "Rimuovi questa interfaccia"
-
-msgid "Delete this network"
-msgstr "Rimuovi questa rete"
-
-msgid "Description"
-msgstr "Descrizione"
-
-msgid "Design"
-msgstr "Disegno"
-
-msgid "Destination"
-msgstr "Destinazione"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid "Device Configuration"
-msgstr "Configurazione del dispositivo"
-
-msgid "Diagnostics"
-msgstr "Diagnostica"
-
-msgid "Directory"
-msgstr "Cartella"
-
-msgid "Disable"
-msgstr "Disabilita"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Disabilita <abbr title=\"Protocollo di Configurazione Host "
-"Dinamico\">DHCP</abbr> per questa interfaccia."
-
-msgid "Disable DNS setup"
-msgstr "Disabilita il setup dei DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Disabilita Timer Beacon HW"
-
-msgid "Disabled"
-msgstr "Disabilitato"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Ignora risposte RFC1918 upstream"
-
-msgid "Displaying only packages containing"
-msgstr "Visualizza solo i pacchetti contenenti"
-
-msgid "Distance Optimization"
-msgstr "Ottimizzazione distanza"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distanza del membro più lontano della rete in metri."
-
-msgid "Diversity"
-msgstr "Diversità"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq è un server <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> e inoltratore <abbr title=\"Domain Name "
-"System\">DNS</abbr> per firewall <abbr title=\"Network Address "
-"Translation\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "Non memorizzare le repliche negative, es. per domini non esistenti"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Non inoltrare le richieste che non possono essere risolte dai name server "
-"pubblici"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Non proseguire con le ricerche inverse per le reti locali."
-
-msgid "Do not send probe responses"
-msgstr "Disabilita Probe-Responses"
-
-msgid "Domain required"
-msgstr "Dominio richiesto"
-
-msgid "Domain whitelist"
-msgstr "Elenco Domini consentiti"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Non inoltrare le richieste <abbr title=\"Domain Name System\">DNS</abbr> "
-"senza nome <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "Download and install package"
-msgstr "Scarica e installa pacchetto"
-
-msgid "Download backup"
-msgstr "Download backup"
-
-msgid "Dropbear Instance"
-msgstr "Instanza di Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear offre accesso <abbr title=\"Secure Shell\">SSH</abbr> e integra un "
-"server <abbr title=\"Secure Copy\">SCP</abbr>"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> dinamico"
-
-msgid "Dynamic tunnel"
-msgstr "Dynamic tunnel"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Fornisci dinamicamente gli indirizzi DHCP ai client. Se disabilitato, solo i "
-"client con un indirizzo statico saranno serviti."
-
-msgid "EAP-Method"
-msgstr "Metodo EAP"
-
-msgid "Edit"
-msgstr "Modifica"
-
-msgid "Edit this interface"
-msgstr "Modifica questa interfaccia"
-
-msgid "Edit this network"
-msgstr "Modifica questa rete"
-
-msgid "Emergency"
-msgstr "Emergenza"
-
-msgid "Enable"
-msgstr "Abilita"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Abilita <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Abilitazione aggiornamento endpoint dinamico HE.net"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Attiva la negoziazione IPv6 sul collegamento PPP"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Abilita Jumbo Frame passthrough"
-
-msgid "Enable NTP client"
-msgstr "Attiva il client NTP"
-
-msgid "Enable TFTP server"
-msgstr "Abilita il server TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "Abilita la funzionalità VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Attivare l'apprendimento e l'invecchiamento"
-
-msgid "Enable this mount"
-msgstr "Abilita questo mount"
-
-msgid "Enable this swap"
-msgstr "Abilita questo swap"
-
-msgid "Enable/Disable"
-msgstr "Abilita/Disabilita"
-
-msgid "Enabled"
-msgstr "Abilitato"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Abilita il protocollo di Spanning Tree su questo bridge"
-
-msgid "Encapsulation mode"
-msgstr "Modalità di incapsulamento"
-
-msgid "Encryption"
-msgstr "Crittografia"
-
-msgid "Erasing..."
-msgstr "Cancellazione..."
-
-msgid "Error"
-msgstr "Errore"
-
-msgid "Ethernet Adapter"
-msgstr "Scheda di Rete"
-
-msgid "Ethernet Switch"
-msgstr "Switch di Rete"
-
-msgid "Expand hosts"
-msgstr "Espandi gli hosts"
-
-msgid "Expires"
-msgstr "Scadenze"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Tempo di scadenza di indirizzi localizzati, il minimo è di 2 minuti (<code> "
-"2m </ code>)."
-
-msgid "External system log server"
-msgstr "Server Log di Sistema esterno"
-
-msgid "External system log server port"
-msgstr "Porta Server Log di Sistema esterno"
-
-msgid "Fast Frames"
-msgstr "Frame veloci"
-
-msgid "File"
-msgstr "File"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Nome del file dell'immagine di avvio annunciato ai clienti."
-
-msgid "Filesystem"
-msgstr "Filesystem"
-
-msgid "Filter"
-msgstr "Filtro"
-
-msgid "Filter private"
-msgstr "Filtra privati"
-
-msgid "Filter useless"
-msgstr "Filtra inutili"
-
-msgid "Find and join network"
-msgstr "Trova e aggiungi una rete"
-
-msgid "Find package"
-msgstr "Cerca pacchetto"
-
-msgid "Finish"
-msgstr "Fine"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr "Impostazioni Firewall"
-
-msgid "Firewall Status"
-msgstr "Stato del Firewall"
-
-msgid "Firmware Version"
-msgstr "Versione del Firmware"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Porta di origine fissa per le richieste DNS in uscita"
-
-msgid "Flags"
-msgstr "Flags"
-
-msgid "Flash Firmware"
-msgstr "Flash Firmware"
-
-msgid "Flash image..."
-msgstr "Flash immagine..."
-
-msgid "Flash new firmware image"
-msgstr "Flash immagine nuovo firmware"
-
-msgid "Flash operations"
-msgstr "Operazioni Flash"
-
-msgid "Flashing..."
-msgstr "Flashing..."
-
-msgid "Force"
-msgstr "Forza"
-
-msgid "Force 40MHz mode"
-msgstr "Forza la modalità a 40MHz"
-
-msgid "Force CCMP (AES)"
-msgstr "Forza CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Forza DHCP su questa rete, anche se un altro server viene rilevato."
-
-msgid "Force TKIP"
-msgstr "Forza TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Forza TKIP e CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Inoltra il traffico DHCP"
-
-msgid "Forward broadcast traffic"
-msgstr "Inoltra il traffico broadcast"
-
-msgid "Forwarding mode"
-msgstr "Modalità di Inoltro"
-
-msgid "Fragmentation Threshold"
-msgstr "Soglia di frammentazione"
-
-msgid "Frame Bursting"
-msgstr "Frame Bursting"
-
-msgid "Free"
-msgstr "Disponibile"
-
-msgid "Free space"
-msgstr "Spazio libero"
-
-msgid "Frequency Hopping"
-msgstr "Frequency Hopping"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "Solo GPRS"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "Gateway ports"
-msgstr "Porte Gateway"
-
-msgid "General Settings"
-msgstr "Opzioni Generali"
-
-msgid "General Setup"
-msgstr "Impostazioni Generali"
-
-msgid "Generate archive"
-msgstr "Genera Archivio"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Dispositivo Wireless 802.11%s Generico"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-"La conferma della password assegnata non ha prodotto risultati, la password "
-"non è stata cambiata!"
-
-msgid "Go to password configuration..."
-msgstr "Vai alla configurazione della password..."
-
-msgid "Go to relevant configuration page"
-msgstr "Vai alla pagina di configurazione relativa"
-
-msgid "HE.net password"
-msgstr "Password HE.net"
-
-msgid "HE.net user ID"
-msgstr "ID Utente HE.net"
-
-msgid "HT capabilities"
-msgstr "capacità HT"
-
-msgid "HT mode"
-msgstr "Modalità HT"
-
-msgid "Handler"
-msgstr "Gestore"
-
-msgid "Hang Up"
-msgstr "Hangup"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Qui puoi configurare gli aspetti base del tuo dispositivo come l&#39;"
-"hostname o il fuso orario."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Qui è possibile incollare le chiavi pubbliche SSH (uno per riga) per "
-"l'autenticazione con chiave pubblica SSH."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Dispositivo Wireless Hermes 802.11b"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Nascondi <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Campi host"
-
-msgid "Host expiry timeout"
-msgstr "Timeout scadenza Host"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"<abbr title=\"Internet Protocol Address\">IP</abbr> dell&#39;host o rete"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Nome host da inviare al momento della richiesta DHCP"
-
-msgid "Hostnames"
-msgstr "Hostname"
-
-msgid "IP address"
-msgstr "Indirizzo IP"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "IPv4 Firewall"
-
-msgid "IPv4 WAN Status"
-msgstr "Stato WAN IPv4"
-
-msgid "IPv4 address"
-msgstr "Indirizzi IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "trasmissione IPv4"
-
-msgid "IPv4 gateway"
-msgstr "Gateway IPv4"
-
-msgid "IPv4 netmask"
-msgstr "Maschera rete IPv4"
-
-msgid "IPv4 only"
-msgstr "Solo IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "Lunghezza prefisso IPv4"
-
-msgid "IPv4-Address"
-msgstr "Indirizzo-IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "IPv6 Firewall"
-
-msgid "IPv6 WAN Status"
-msgstr "Stato WAN IPv6"
-
-msgid "IPv6 address"
-msgstr "Indirizzi IPv6"
-
-msgid "IPv6 gateway"
-msgstr "Gateway IPv6"
-
-msgid "IPv6 only"
-msgstr "Solo IPv6"
-
-msgid "IPv6 prefix"
-msgstr "Prefisso IPv6"
-
-msgid "IPv6 prefix length"
-msgstr "Lunghezza prefisso IPv6"
-
-msgid "IPv6-Address"
-msgstr "Indirizzo-IPv6"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-in-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-su-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-su-IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "Identità PEAP"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Se specificato, montare il dispositivo dal suo UUID invece che dal nodo di "
-"dispositivo fisso"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Se specificato, montare il dispositivo dall'etichetta della partizione al "
-"posto di un nodo di un dispositivo fisso"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Se deselezionata, alcun percorso predefinito è configurato"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-"Se deselezionata, gli indirizzi ai Server DNS annunciati saranno ignorati"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Se la tua memoria è insufficiente i dati non usati possono venire "
-"temporaneamente spostati in un'area di swap risultando in un più grande "
-"quantitativo di <abbr title=\"Random Access Memory\">RAM</abbr> usabile. "
-"Sappi che spostare dati in swap è un processo molto lento e che il "
-"dispositivo di swap non può essere acceduto alle alte velocità della <abbr "
-"title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Ignora i files Hosts"
-
-msgid "Ignore interface"
-msgstr "Ignora interfaccia"
-
-msgid "Ignore resolve file"
-msgstr "Ignora file resolv"
-
-msgid "Image"
-msgstr "Immagine"
-
-msgid "In"
-msgstr "In"
-
-msgid "Inactivity timeout"
-msgstr "Tempo di Inattività"
-
-msgid "Inbound:"
-msgstr "in entrata:"
-
-msgid "Info"
-msgstr "Informazioni"
-
-msgid "Initscript"
-msgstr "Script di avvio"
-
-msgid "Initscripts"
-msgstr "Scripts di avvio"
-
-msgid "Install"
-msgstr "Installa"
-
-msgid "Install package %q"
-msgstr "Installa il pacchetto %q"
-
-msgid "Install protocol extensions..."
-msgstr "Installa le estensioni del protocollo..."
-
-msgid "Installed packages"
-msgstr "Pacchetti installati"
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid "Interface Configuration"
-msgstr "Configurazione Interfaccia"
-
-msgid "Interface Overview"
-msgstr "Riassunto Interfaccia"
-
-msgid "Interface is reconnecting..."
-msgstr "L'interfaccia si sta ricollegando..."
-
-msgid "Interface is shutting down..."
-msgstr "L'intefaccia si sta spegnendo..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Interfaccia non presente o non ancora connessa."
-
-msgid "Interface reconnected"
-msgstr "Interfaccia ricollegata."
-
-msgid "Interface shut down"
-msgstr "Interfaccia spenta"
-
-msgid "Interfaces"
-msgstr "Interfacce"
-
-msgid "Internal Server Error"
-msgstr "Errore del Server Interno"
-
-msgid "Invalid"
-msgstr "Valore immesso non valido"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "ID VLAN non valido! Solo gli ID compresi tra %d e %d sono consentiti."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "ID VLAN non valido! Solo gli ID unici sono consentiti"
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Username o password non validi! Per favore riprova."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Sembra tu stia provando a flashare un'immagine più grande delle dimensioni "
-"della memoria flash, per favore controlla il file!"
-
-msgid "Java Script required!"
-msgstr "Richiesto Java Script!"
-
-msgid "Join Network"
-msgstr "Aggiungi Rete"
-
-msgid "Join Network: Settings"
-msgstr "Aggiunta Rete: Impostazioni"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Aggiunta Rete: Rilevamento Wireless"
-
-msgid "Keep settings"
-msgstr "Mantieni le Impostazioni"
-
-msgid "Kernel Log"
-msgstr "Log del kernel"
-
-msgid "Kernel Version"
-msgstr "Versione del kernel"
-
-msgid "Key"
-msgstr "Chiave"
-
-msgid "Key #%d"
-msgstr "Chiave #%d"
-
-msgid "Kill"
-msgstr "Uccidi"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "Server L2TP"
-
-msgid "LCP echo failure threshold"
-msgstr "fallimento soglia echo LCP"
-
-msgid "LCP echo interval"
-msgstr "Intervallo echo LCP"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Etichetta"
-
-msgid "Language"
-msgstr "Lingua"
-
-msgid "Language and Style"
-msgstr "Lingua e Stile"
-
-msgid "Lease validity time"
-msgstr "Periodo di Validità del Lease"
-
-msgid "Leasefile"
-msgstr "File di lease"
-
-msgid "Leasetime"
-msgstr "Tempo di lease"
-
-msgid "Leasetime remaining"
-msgstr "Tempo lease residuo"
-
-msgid "Leave empty to autodetect"
-msgstr "Lasciare vuoto per l'autorilevamento"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Lasciare vuoto per usare l'indirizzo WAN attuale"
-
-msgid "Legend:"
-msgstr "Legenda:"
-
-msgid "Limit"
-msgstr "Limite"
-
-msgid "Link On"
-msgstr "Collegamento on"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Elenco di Server <abbr title=\"Sistema Nome Dimio\">DNS</abbr>a cui inoltrare "
-"le richieste in"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Elenco di domini da consentire le risposte RFC1918 per"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "Elenco degli host che forniscono falsi risultati di dominio NX"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr "Ascolta solo l'interfaccia data o, se non specificato, su tutte"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Porta di ascolto per le richieste DNS in entrata"
-
-msgid "Load"
-msgstr "Carico"
-
-msgid "Load Average"
-msgstr "Carico Medio"
-
-msgid "Loading"
-msgstr "Caricamento"
-
-msgid "Local IPv4 address"
-msgstr "Indirizzo IPv4 locale"
-
-msgid "Local IPv6 address"
-msgstr "Indirizzo IPv6 locale"
-
-msgid "Local Startup"
-msgstr "Avvio Locale"
-
-msgid "Local Time"
-msgstr "Ora locale"
-
-msgid "Local domain"
-msgstr "Dominio Locale"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Specifiche dominio locale. I nomi di dominio corrispondenti a questi criteri "
-"non sono mai inoltrate e risolti solo da DHCP o file hosts"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Suffisso di dominio locale aggiunto ai nomi dei DHCP e voci del file hosts"
-
-msgid "Local server"
-msgstr "Server Locale"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Localizzare nome host a seconda della sottorete richiedente se sono "
-"disponibili IP multipli"
-
-msgid "Localise queries"
-msgstr "Localizza richieste"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Bloccato al canale %d utilizzato da %s"
-
-msgid "Log output level"
-msgstr "Livello di dettaglio registro"
-
-msgid "Log queries"
-msgstr "Logga richieste"
-
-msgid "Logging"
-msgstr "Logging"
-
-msgid "Login"
-msgstr "Login"
-
-msgid "Logout"
-msgstr "Logout"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr "Filtro dei MAC-Address"
-
-msgid "MAC-Filter"
-msgstr "Filtro MAC"
-
-msgid "MAC-List"
-msgstr "Lista MAC"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Velocità massima"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr "Velocità massima"
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memoria"
-
-msgid "Memory usage (%)"
-msgstr "Uso Memory (%)"
-
-msgid "Metric"
-msgstr "Metrica"
-
-msgid "Minimum Rate"
-msgstr "Velocità minima"
-
-msgid "Minimum hold time"
-msgstr "Velocità minima"
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Modalità"
-
-msgid "Modem device"
-msgstr "Dispositivo modem"
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr "Punto di mount"
-
-msgid "Mount Points"
-msgstr "Punto di mount"
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"I punti di mount definiscono in quale punto un dispositivo di memoria verrà "
-"attaccato al tuo filesystem"
-
-msgid "Mount options"
-msgstr "Opzioni di mount"
-
-msgid "Mount point"
-msgstr "Punto di mount"
-
-msgid "Mounted file systems"
-msgstr "File system montati"
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr "Velocità multicast"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr "ID della NAS"
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Name of the new interface"
-msgstr "Nome della nuova interfaccia"
-
-msgid "Name of the new network"
-msgstr "Nome della nuova rete"
-
-msgid "Navigation"
-msgstr "Navigazione"
-
-msgid "Netmask"
-msgstr "Maschera di rete"
-
-msgid "Network"
-msgstr "Rete"
-
-msgid "Network Utilities"
-msgstr "Utilità di Rete"
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr "Prossimo »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr ""
-
-msgid "No files found"
-msgstr "Nessun file trovato"
-
-msgid "No information available"
-msgstr "Nessuna informazione disponibile"
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr "Nessuna rete è configurata su questo dispositivo"
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr ""
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr "Rumore"
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr "Nessuno"
-
-msgid "Normal"
-msgstr "Normale"
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr "Non associato"
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr "Avviso"
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Configurazione di OPKG"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"In questa pagina puoi configurare le interfacce di rete.Puoi unire più "
-"interfacce spuntando la voce \"unisci interfacce\" e inserendo i nomi di più "
-"interfacce di rete separate da spazi. Puoi anche usare la notazione <abbr "
-"title=\"Virtual Local Area Network\">VLAN</abbr> <samp>INTERFACCIA.VLANNUM</"
-"samp> (<abbr title=\"per esempio\">e.s.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Uno o più campi contengono valori non validi!"
-
-msgid "One or more required fields have no value!"
-msgstr "Uno o più campi obbligatori sono vuoti!"
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr "Opzione cambiata"
-
-msgid "Option removed"
-msgstr "Opzione cancellata"
-
-msgid "Options"
-msgstr "Opzioni"
-
-msgid "Other:"
-msgstr "Altro:"
-
-msgid "Out"
-msgstr ""
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr ""
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "Riassunto"
-
-msgid "Owner"
-msgstr "Proprietario"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr "Incapsulamento PPPoA"
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr "E' richiesto il pacchetto libiwinfo!"
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "Nome pacchetto"
-
-msgid "Packets"
-msgstr "Pacchetti"
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr "Password"
-
-msgid "Password authentication"
-msgstr "Password di authenticazione"
-
-msgid "Password of Private Key"
-msgstr "Password della chiave privata"
-
-msgid "Password successfully changed!"
-msgstr "Password cambiata con successo!"
-
-msgid "Path to CA-Certificate"
-msgstr "Percorso al certificato CA"
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "Percorso alla chiave privata"
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr "Picco:"
-
-msgid "Perform reboot"
-msgstr "Esegui un riavvio"
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr "Per favore inserisci il tuo username e la password."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Per favore attendi: Riavvio del dispositivo..."
-
-msgid "Policy"
-msgstr ""
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Port %d"
-msgstr "Porta %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr "Impedisci la comunicazione fra Client"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Continuare"
-
-msgid "Processes"
-msgstr "Processi"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protocollo"
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr "Soglia RTS/CTS"
-
-msgid "RX"
-msgstr ""
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Leggi <code>/etc/ethers</code> per configurare il server <abbr title="
-"\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr "Connessioni in tempo reale"
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr "Carico in tempo reale"
-
-msgid "Realtime Traffic"
-msgstr "Traffico in tempo reale"
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Riavvia"
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr "Riavvia il sistema operativo del tuo dispositivo"
-
-msgid "Receive"
-msgstr "Ricezione"
-
-msgid "Receiver Antenna"
-msgstr "Antenna ricevente"
-
-msgid "Reconnect this interface"
-msgstr "Ricollega questa interfaccia"
-
-msgid "Reconnecting interface"
-msgstr "Sto ricollegando l'interfaccia"
-
-msgid "References"
-msgstr ""
-
-msgid "Regulatory Domain"
-msgstr ""
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr "Rimuovi"
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr "Sostituisci campo"
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Reset"
-
-msgid "Reset Counters"
-msgstr "Azzera Contatori"
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr "File Resolve"
-
-msgid "Restart"
-msgstr "Riavvia"
-
-msgid "Restart Firewall"
-msgstr "Riavvia Firewall"
-
-msgid "Restore backup"
-msgstr "Ripristina backup"
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr "Ripristina"
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr "Modello Router"
-
-msgid "Router Name"
-msgstr "Nome Router"
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr "Route"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Le route specificano attraverso quale interfaccia e gateway un certo host o "
-"rete può essere raggiunto."
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid "Save"
-msgstr "Salva"
-
-msgid "Save & Apply"
-msgstr "Salva & applica"
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr "Scan"
-
-msgid "Scheduled Tasks"
-msgstr "Operazioni programmate"
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr "Isola utenti"
-
-msgid "Separate WDS"
-msgstr "WDS separati"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "Servizi"
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr "Segnale"
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr "Dimensione"
-
-msgid "Skip"
-msgstr "Salta"
-
-msgid "Skip to content"
-msgstr "Salta a contenuto"
-
-msgid "Skip to navigation"
-msgstr "Salta a navigazione"
-
-msgid "Slot time"
-msgstr "Slot time"
-
-msgid "Software"
-msgstr "Software"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Alcuni campi non sono validi, non è possibile salvare i valori!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Siamo spiacenti, l'oggetto che hai richiesto non è stato trovato."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Spiacente, il server ha rilevato un errore imprevisto."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"Spiacenti, non è presente alcun supporto sysupgrade, una nuova immagine "
-"firmware deve essere memorizzata (Flash) manualmente. Si prega di fare "
-"riferimento al wiki di OpenWrt per le istruzioni di installazione di "
-"dispositivi specifici."
-
-msgid "Sort"
-msgstr "Elenca"
-
-msgid "Source"
-msgstr "Origine"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-"Specifica la durata dell'annuncio con prefisso preferito della durata in "
-"secondi"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-"Specifica la validità dell'annuncio con prefisso preferito della durata in "
-"secondi"
-
-msgid "Specifies the button state to handle"
-msgstr "Specifica lo stato del pulsante da gestire"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Specifica la cartella a cui è collegato il dispositivo in"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Specifica la porta di ascolto di questa istanza <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Consente di specificare la quantità massima di richieste ARP fallite finché "
-"gli host si presume siano morti."
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-"Specifica la quantità massima di secondi dopo di che si presume che gli host "
-"siano morti."
-
-msgid "Specify the secret encryption key here."
-msgstr "Specificare la chiave di cifratura qui."
-
-msgid "Start"
-msgstr "Inizio"
-
-msgid "Start priority"
-msgstr "Priorità di avvio"
-
-msgid "Startup"
-msgstr "Avvio"
-
-msgid "Static IPv4 Routes"
-msgstr "Instradamento statico IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Instradamento statico IPv6"
-
-msgid "Static Leases"
-msgstr "Leases statici"
-
-msgid "Static Routes"
-msgstr "Instradamenti Statici"
-
-msgid "Static WDS"
-msgstr "WDS statico"
-
-msgid "Static address"
-msgstr "Indirizzo Statico"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Leasing statici vengono utilizzati per assegnare indirizzi IP fissi e nomi "
-"host simbolici ai client DHCP. Essi sono necessari anche per interfacce di "
-"configurazione non dinamici, dove solo gli host con lease corrispondente "
-"servito vengono serviti."
-
-msgid "Status"
-msgstr "Stato"
-
-msgid "Stop"
-msgstr "Ferma"
-
-msgid "Strict order"
-msgstr "Ordine severo"
-
-msgid "Submit"
-msgstr "Invia"
-
-msgid "Swap Entry"
-msgstr "Scambia ingresso"
-
-msgid "Switch"
-msgstr "Switch"
-
-msgid "Switch %q"
-msgstr "Switch %q"
-
-msgid "Switch %q (%s)"
-msgstr "Switch %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Cambia protocollo"
-
-msgid "Sync with browser"
-msgstr "Sincronizza con il browser"
-
-msgid "Synchronizing..."
-msgstr "Sincronizzazione..."
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "System Log"
-msgstr "Log di sistema"
-
-msgid "System Properties"
-msgstr "Proprietà di Sistema"
-
-msgid "System log buffer size"
-msgstr "Dimensione Buffer Log di Sistema"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Impostazioni TFTP"
-
-msgid "TFTP server root"
-msgstr "Server TFTP principale"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "Velocità di TX"
-
-msgid "Table"
-msgstr "Tabella"
-
-msgid "Target"
-msgstr "Destinazione"
-
-msgid "Terminate"
-msgstr "Termina"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"La sezione <em>Configurazione del Dispositivo</em> illustra le impostazioni "
-"fisiche del hardware radio come canale, la potenza di trasmissione o la "
-"selezione dell'antenna che viene condiviso tra tutte le reti wireless "
-"definite (se l'hardware radio è multi-SSID compatibilie). Per le "
-"impostazioni di rete come la crittografia o la modalità di funzionamento "
-"sono raggruppati nella <em>configurazione dell'interfaccia</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Il pacchetto <em>libiwinfo-lua</em> non è installato. È necessario "
-"installare questo componente per il lavoro di configurazione wireless!"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"Il prefisso IPv6 assegnati dal provider, si conclude di solito con "
-"<code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"Il file del dispositivo di memoria o della partizione (<abbr title=\"per "
-"esempio\">e.s.</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Il filesystem usato per formattare la memoria (<abbr title=\"per esempio\">e."
-"s.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr "Le seguenti modifiche sono state annullate"
-
-msgid "The following rules are currently active on this system."
-msgstr "Le seguenti regole sono al momento attive su questo sistema."
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Questo è l&#39;unico server <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> nella tua rete locale"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Questa è la crontab del sistema nella quale possono essere definiti le "
-"operazioni da programmare."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Questa lista da un riassunto dei processi correntemente attivi e del loro "
-"stato."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "Questa pagina ti da una riassunto delle connessioni al momento attive."
-
-msgid "This section contains no values yet"
-msgstr "Questa sezione non contiene ancora valori"
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Fuso orario"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr "Totale"
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "Traffico"
-
-msgid "Transfer"
-msgstr ""
-
-msgid "Transmission Rate"
-msgstr "Velocità di transmissione"
-
-msgid "Transmit"
-msgstr "Trasmissione"
-
-msgid "Transmit Power"
-msgstr "Potenza di trasmissione"
-
-msgid "Transmitter Antenna"
-msgstr "Antenna trasmettente"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "Modalità turbo"
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr "Tipo"
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Modifiche non salvate"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Carica un'immagine sysupgrade compatibile quì per sostituire il firmware in "
-"esecuzione. Attivare la spunta \"Mantieni Impostazioni\" per mantenere la "
-"configurazione corrente (richiede un immagine del firmware OpenWrt "
-"compatibile)."
-
-msgid "Upload archive..."
-msgstr "Carica archivio..."
-
-msgid "Uploaded File"
-msgstr "Invia file"
-
-msgid "Uptime"
-msgstr "Tempo di attività"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Usa <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Usa il DHCP del gateway"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Usa i server DNS annunciati dal peer"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Usa i codici delle nazioni ISO/IEC 3166 alpha2."
-
-msgid "Use MTU on tunnel interface"
-msgstr "Usa MTU nel tunnel dell'interfaccia"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Usa TTL nel tunnel dell'interfaccia"
-
-msgid "Use as root filesystem"
-msgstr "Utilizzare come filesystem di root"
-
-msgid "Use broadcast flag"
-msgstr "Usa flag broadcast"
-
-msgid "Use custom DNS servers"
-msgstr "Usa server DNS personalizzati"
-
-msgid "Use default gateway"
-msgstr "Usa il gateway predefinito"
-
-msgid "Use gateway metric"
-msgstr "Usa la metrica del gateway"
-
-msgid "Use preferred lifetime"
-msgstr "Utilizzare durata preferita"
-
-msgid "Use routing table"
-msgstr "Utilizzare tabella di instradamento"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Utilizzare il pulsante <em>Aggiungi</ em> per aggiungere una nuova voce di "
-"locazione. L'<em>Indirizzo-MAC</ em> identifica l'host, l'<em>Indirizzo-"
-"IPv4</ em> specifica l'indirizzo fisso da utilizzare e il <em> Nome Host</ "
-"em> è assegnato come nome simbolico alla richiesta dell'host."
-
-msgid "Use valid lifetime"
-msgstr "Utilizzare durata valida"
-
-msgid "Used"
-msgstr "Usato"
-
-msgid "Used Key Slot"
-msgstr "Slot Chiave Usata"
-
-msgid "Username"
-msgstr "Nome Utente"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Interfaccia VLAN"
-
-msgid "VLANs on %q"
-msgstr "VLANs su %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLANs su %q (%s)"
-
-msgid "VPN Server"
-msgstr "Server VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "Classe del Produttore da 'inviare al momento della richiesta DHCP"
-
-msgid "Verify"
-msgstr "Verifica"
-
-msgid "Version"
-msgstr "Versione"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "Sistema Aperto WEP"
-
-msgid "WEP Shared Key"
-msgstr "Chiave Condivisa WEP"
-
-msgid "WEP passphrase"
-msgstr "frase di accesso WEP"
-
-msgid "WMM Mode"
-msgstr "Modalità WMM"
-
-msgid "WPA passphrase"
-msgstr "frase di accesso WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"La crittografia WPA richiede wpa_supplicant (per la modalità client) o "
-"hostapd (per AP e modalità ad hoc) per essere installato."
-
-msgid "Waiting for changes to be applied..."
-msgstr "In attesa delle modifiche da applicare ..."
-
-msgid "Waiting for command to complete..."
-msgstr "In attesa del comando da completare..."
-
-msgid "Warning"
-msgstr "Avviso"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Attenzione: Ci sono modifiche non salvate che verranno persi riavviando!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless Adapter"
-msgstr "Dispositivo Wireless"
-
-msgid "Wireless Network"
-msgstr "Rete Wireless"
-
-msgid "Wireless Overview"
-msgstr "Panoramica Wireless"
-
-msgid "Wireless Security"
-msgstr "Sicurezza Wireless"
-
-msgid "Wireless is disabled or not associated"
-msgstr "La rete Wireless è disattivata o non associata"
-
-msgid "Wireless is restarting..."
-msgstr "Riavvio della Wireless..."
-
-msgid "Wireless network is disabled"
-msgstr "La rete Wireless è disattivata"
-
-msgid "Wireless network is enabled"
-msgstr "La rete wireless è attivata"
-
-msgid "Wireless restarted"
-msgstr "Wireless riavviato"
-
-msgid "Wireless shut down"
-msgstr "Wireless spento"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Scrittura delle richiesta DNS ricevute nel syslog"
-
-msgid "XR Support"
-msgstr "Supporto XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"È possibile abilitare o disabilitare gli script di inizializzazione "
-"installati qui. Le modifiche saranno applicate dopo il riavvio del "
-"dispositivo <br/><strong>Attenzione: Se si disattiva gli script di "
-"inizializzazione essenziali come ad esempio la \"rete\", il dispositivo "
-"potrebbe diventare inaccessibile!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"È necessario attivare Java Script nel tuo browser o LuCI non funzionerà "
-"correttamente."
-
-msgid "any"
-msgstr "qualsiasi"
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "ponte"
-
-msgid "create:"
-msgstr "crea:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "Crea un ponte sulle interfacce selezionate"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "disabilita"
-
-msgid "expired"
-msgstr "scaduto"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"file dove vengono salvati le richieste <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr> assegnate"
-
-msgid "forward"
-msgstr "inoltro"
-
-msgid "full-duplex"
-msgstr "full-duplex"
-
-msgid "half-duplex"
-msgstr "half-duplex"
-
-msgid "help"
-msgstr "aiuto"
-
-msgid "hidden"
-msgstr "nascosto"
-
-msgid "if target is a network"
-msgstr "se la destinazione è una rete"
-
-msgid "input"
-msgstr "ingresso"
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "File <abbr title=\"Sistema Nome Dominio\">DNS</abbr> locale"
-
-msgid "no"
-msgstr "no"
-
-msgid "no link"
-msgstr "Nessun collegamento"
-
-msgid "none"
-msgstr "nessuna"
-
-msgid "off"
-msgstr "spento"
-
-msgid "on"
-msgstr "acceso"
-
-msgid "open"
-msgstr "apri"
-
-msgid "routed"
-msgstr "instradato"
-
-msgid "tagged"
-msgstr "etichettato"
-
-msgid "unknown"
-msgstr "sconosciuto"
-
-msgid "unlimited"
-msgstr "illimitato"
-
-msgid "unspecified"
-msgstr "non specificato"
-
-msgid "unspecified -or- create:"
-msgstr "non specificato - o - creato:"
-
-msgid "untagged"
-msgstr "non etichettato"
-
-msgid "yes"
-msgstr "Sì"
-
-msgid "« Back"
-msgstr "« Indietro"
-
-#~ msgid "Active Leases"
-#~ msgstr "Lease attivi"
-
-#~ msgid "Open"
-#~ msgstr "Apri"
-
-#~ msgid "KB"
-#~ msgstr "KB"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Bit Rate"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Configurazione / Applica"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Configurazioni / cambiamenti"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Configuration / Annullali"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">Encr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">Scansione WLAN</abbr>"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Scegli quale rete vuoi attaccare all'interfaccia wireless. Selezionando "
-#~ "<em>unspecified</em> per non associarne alcuna o <em>create</em> per "
-#~ "definirne una nuova ora."
-
-#~ msgid "Create Network"
-#~ msgstr "Crea rete"
-
-#~ msgid "Link"
-#~ msgstr "Collegamento"
-
-#~ msgid "Networks"
-#~ msgstr "Reti"
-
-#~ msgid "Power"
-#~ msgstr "Potenza"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Reti Wifi nell&#39;ambiente circostante"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "Notazione <abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>: "
-#~ "indirizzo/prefisso"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "Broadcast <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Indirizzo <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Nota: Se scegli un interfaccia qui che fa parte di un altro network, sarà "
-#~ "spostata in questo network."
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Vuoi davvero cancellare questa interfaccia? Non potrai tornare indietro!"
-#~ "\\nPotresti perdere l'accesso a questo router se stai usando questa "
-#~ "interfaccia."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Vuoi davvero cancellare questa rete wireless? Non potrai tornare indietro!"
-#~ "\\nPotresti perdere l'accesso a questo router se stai usando questa rete."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Vuoi davvero spegnere questa interfaccia \"%s\" ?\\nPotresti perdere "
-#~ "l'accesso a questo router se stai usando questa interfaccia."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Le porte di rete del tuo router possono essere combinate in molte <abbr "
-#~ "title=\"Virtual Local Area Network\">VLAN</abbr> nelle quali i computer "
-#~ "possono comunicare direttamente fra di loro. Le <abbr title=\"Virtual "
-#~ "Local Area Network\">VLAN</abbr> sono spesso usate per separare segmenti "
-#~ "di rete differenti. Spesso c&#39;è come predefinita una porta per la "
-#~ "connessione alla prossiam rete più grande come Internet e altre porte per "
-#~ "le reti locali."
-
-#~ msgid "Custom Files"
-#~ msgstr "Files personalizzati"
-
-#~ msgid "Custom files"
-#~ msgstr "Files personalizzati"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Files da conservare quando si aggiorna un nuovo firmware"
-
-#~ msgid "General"
-#~ msgstr "Generale"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Qui puoi personalizzare i settaggi e le funzionalità di <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Azioni post-modifica"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Questi comandi verranno eseguiti automaticamente quando un comando di "
-#~ "configurazione <abbr title=\"Unified Configuration Interface\">UCI</abbr> "
-#~ "viene applicato permettendo alle modifiche di essere applicate "
-#~ "immediatamente."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "<abbr title=\"User Interface\">UI</abbr> web"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "Server <abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "tentativi ping ARP "
-
-#~ msgid "ATM Settings"
-#~ msgstr "Impostazioni ATM"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "Accetta annunciamenti router"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Access point (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Opzioni pppd aggiuntive"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "Intervallo ammesso è tra 1 e FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Disconnetti automaticamente"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Archivio di backup"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configura il server DNS locale per usare i server DNS negoziati da PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Script connessione"
-
-#~ msgid "Create backup"
-#~ msgstr "Crea un backup"
-
-#~ msgid "Default"
-#~ msgstr "Default"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Script disconnessione"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Modifica lista dei pacchetti e destinazione dell'installazione"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "Abilita 4K VLANs"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Attiva IPv6 sul collegamento PPP"
-
-#, fuzzy
-#~ msgid "Firmware image"
-#~ msgstr "Firmware image"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Qui puoi salvare e ripristinare la configurazione del tuo router e - se "
-#~ "possibile - resettare il router con le impostazioni predefinite."
-
-#~ msgid "Installation targets"
-#~ msgstr "Destinazione installazione"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Conserva i files di configurazione"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid "Kernel"
-#~ msgstr "Kernel"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Consenti a pppd di sostituire la route di default con la route corrente "
-#~ "per usare l&#39;interfaccia PPP dopo una connessione riuscita"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr ""
-#~ "Permette a pppd di avviare questo script dopo l&#39;avvenuta connessione "
-#~ "PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr ""
-#~ "Permette a pppd di avviare questo script prima della disconnessione PPP"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Fai attenzione di inserire il codice PIN corretto qui o potresti bloccare "
-#~ "la tua sim card!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "Molti di loro sono servers, che offrono un determinato servizio al tuo "
-#~ "dispositivo o alla tua rete come accesso shell, servire pagine web come "
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>, fare mesh "
-#~ "routing, inviare e-mails, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "Numero di test di connettività falliti prima di una riconnessione"
-
-#~ msgid "PIN code"
-#~ msgstr "Codice PIN"
-
-#~ msgid "PPP Settings"
-#~ msgstr "Opzioni PPP"
-
-#~ msgid "Package lists"
-#~ msgstr "Lista pacchetti"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr ""
-#~ "Procedi annullando tutte le modifiche e resettando ai predefiniti del "
-#~ "firmware?"
-
-#~ msgid "Processor"
-#~ msgstr "Processore"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Porta Radius"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Server Radius"
-
-#~ msgid "Relay Settings"
-#~ msgstr "Opzioni Relay"
-
-#~ msgid "Replace default route"
-#~ msgstr "Sostituisci route di default"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Ripristina il router come predefinito"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Secondi da attendere prima che il modem diventi pronto prima di provare a "
-#~ "connettersi"
-
-#~ msgid "Service type"
-#~ msgstr "Tipo di servizio"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Servizi e demoni svolgono alcune azioni sul tuo dispositivo."
-
-#~ msgid "Settings"
-#~ msgstr "Impostazioni"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Tempo di attesa inizializzazione"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Specifica opzioni linea di comando aggiuntive per pppd qui"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "Il device node del tuo modem, e.s. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr ""
-#~ "Tempo (in secondi) dopo il quale una connessione inattiva verrà chiusa"
-
-#~ msgid "Update package lists"
-#~ msgstr "Aggiorna lista pacchetti"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Upload an OpenWrt image file to reflash the device."
-
-#~ msgid "Upload image"
-#~ msgstr "Upload image"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Usa DNS ottenuti"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Devi installare \"comgt\" per il supporto UMTS/GPRS, \"ppp-mod-pppoe\" "
-#~ "per PPPoE, \"ppp-mod-pppoa\" per PPPoA e \"pptp\" per PPtP"
-
-#~ msgid "back"
-#~ msgstr "indietro"
-
-#~ msgid "buffered"
-#~ msgstr "in buffer"
-
-#~ msgid "cached"
-#~ msgstr "in cache"
-
-#~ msgid "free"
-#~ msgstr "libera"
-
-#~ msgid "static"
-#~ msgstr "statico"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> è una collezione "
-#~ "di software libero scritto in Lua comprendente un Webframework e "
-#~ "interfaccia web <abbr title=\"Model-View-Controller\">MVC</abbr> per "
-#~ "dispositivi integrati. <abbr title=\"Lua Configuration Interface\">LuCI</"
-#~ "abbr> è rilasciato sotto la Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "Chiavi <abbr title=\"Secure Shell\">SSH</abbr>s"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Un piccolo e leggero web-server scritto in C è disegnato per integrarsi "
-#~ "con LuCi"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Un piccolo webserver che può essere usato per servire <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "Informazioni su"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "Connessioni IP attive"
-
-#~ msgid "Addresses"
-#~ msgstr "Indirizzi"
-
-#~ msgid "Admin Password"
-#~ msgstr "Password di Amministratore"
-
-#~ msgid "Alias"
-#~ msgstr "Alias"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Authentication Realm"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Porta Bridge"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Cambia la password dell'amministratore di sistema (Utente <code>root</"
-#~ "code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Client + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "File di configurazione"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Timeout Connessione"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Contributing Developers"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP assegnato"
-
-#~ msgid "Document root"
-#~ msgstr "Radice dei documenti"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Abilita Keep-Alive"
-
-#~ msgid "Enable device"
-#~ msgstr "Abilita dispositivo"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Qui puoi incollare le tue chiavi <abbr title=\"Secure Shell\">SSH</abbr> "
-#~ "(una per linea) per l&#39;autenticazione <abbr title=\"Secure Shell"
-#~ "\">SSH</abbr> a chiave pubblica."
-
-#~ msgid "Interface Status"
-#~ msgstr "Stato Interfaccia"
-
-#~ msgid "Lead Development"
-#~ msgstr "Lead Development"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "Nessun indirizzo è configurato su questa interfaccia."
-
-#~ msgid "Not configured"
-#~ msgstr "Non configurato"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Password cambiata con successo"
-
-#~ msgid "Plugin path"
-#~ msgstr "Percorso plugin"
-
-#~ msgid "Ports"
-#~ msgstr "Porte"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Sito del progetto"
-
-#~ msgid "Thanks To"
-#~ msgstr "Ringraziamenti"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "Il realm che verrà visualizzato al prompt di autenticazione per le pagine "
-#~ "protette."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Errore sconosciuto"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "predefinito <code>/etc/httpd.conf</code>"
-
-#~ msgid "Enable this switch"
-#~ msgstr "Abilita questo switch"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG codice di errore %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Lista pacchetti aggiornata"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Upgrade installed packages"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Inoltre i log del kernel o dei servizi sono visualizzabili qui per avere "
-#~ "un riassunto dello stato attuale."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Qui puoi trovare informazione sullo stato del sistema come frequenza di "
-#~ "clock della <abbr title=\"Central Processing Unit\">CPU</abbr>, uso della "
-#~ "memoria o dati della scheda di rete."
-
-#~ msgid "Search file..."
-#~ msgstr "Cerca file..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> è un&#39;"
-#~ "interfaccia grafica gratuita, flessibile, e amichevole per configurare "
-#~ "OpenWrt Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "Ed ora buon divertimento con il tuo router!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "dal momento che vogliamo migliorare quest&#39;interfaccia accettiamo "
-#~ "suggerimenti."
-
-#~ msgid "Hello!"
-#~ msgstr "Ciao!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Nota: Le modifiche devono essere confermate in <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr> cliccando Modifiche - Salva e "
-#~ "Applica prima di essere applicate."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "Nelle seguenti pagine puoi impostare tutti i settaggi più importanti del "
-#~ "tuo router"
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "Il Team di <abbr title=\"Lua Configuration Interface\">LuCI</abbr>"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Questa è l&#39;area d&#39;amministrazione di <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Interfaccia utente"
-
-#~ msgid "enable"
-#~ msgstr "abilita"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr " (opzionale)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "Porta <abbr title=\"Domain Name System\">DNS</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "I server <abbr title=\"Domain Name System\">DNS</abbr> verranno "
-#~ "contattati nell&#39;ordine del file resolv"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "Numero massimo di lease <abbr title=\"Dynamic Host Configuration Protocol"
-#~ "\">DHCP</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "Dimensione massima pacchetto <abbr title=\"Extension Mechanisms for "
-#~ "Domain Name System\">EDNS0</abbr>"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "Isolazione AP"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Aggiungi la rete Wifi alla rete fisica"
-
-#~ msgid "Aliases"
-#~ msgstr "Alias"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Crea rete"
-
-#~ msgid "Devices"
-#~ msgstr "Dispositivi"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Non inoltrare richieste per le reti locali"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Abilita server TFTP"
-
-#~ msgid "Errors"
-#~ msgstr "Errori"
-
-#~ msgid "Essentials"
-#~ msgstr "Essenziali"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Espandi host"
-
-#~ msgid "First leased address"
-#~ msgstr "Primo indirizzo offerto"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Hardware Address"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Qui puoi configurare i tuoi dispositivi wireless installati."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignora <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Independente (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Connessione Internet"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Partecipa (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Lease"
-
-#~ msgid "Local Domain"
-#~ msgstr "Dominio locale"
-
-#~ msgid "Local Network"
-#~ msgstr "Rete locale"
-
-#~ msgid "Local Server"
-#~ msgstr "Server locale"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Immagine boot da rete"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Nome rete (<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Numero di indirizzi offerti"
-
-#~ msgid "Path"
-#~ msgstr "Percorso"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Esegui azioni"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Impedisci la comunicazione fra Client"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Offri (Access Point)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "File resolv"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Radice del server TFTP"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Le seguenti modifiche sono state applicate"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Quando si aggiorna un firmware con <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> questi files verranno aggiunti al nuovo firmware."
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Con <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> i "
-#~ "membri della rete possono ricevere automaticamente le loro impostazioni "
-#~ "di rete (indirizzi <abbr title=\"Internet Protocol\">IP</abbr>, maschere "
-#~ "di rete, server <abbr title=\"Domain Name System\">DNS</abbr>, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Puoi avere più reti wifi con un solo dispositivo. Sappi ceh ci sono "
-#~ "alcune restrizioni relative all&#39;hardware ed al driver.Normalmente "
-#~ "puoi avere 1 rete Ad-Hoc o fino a 3 reti Master e uan rete in modalità "
-#~ "Client contemporaneamente."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Devi installare \"ppp-mod-pppoe\" per il supporto PPPoE e \"pptp\" per "
-#~ "PPtP"
-
-#~ msgid "additional hostfile"
-#~ msgstr "file hosts aggiuntivo"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "aggiungi nomi di dominio nel file resolv"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "statico"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "riconnetti automaticamente"
-
-#~ msgid "concurrent queries"
-#~ msgstr "richieste contemporanee"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "disabilita <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr> per queste interfacce"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "disconnetti quando non usata per"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "non tenere sconosciuti in cache"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "Filtra richieste <abbr title=\"Domain Name System\">DNS</abbr> inutili di "
-#~ "sistemi windows"
-
-#~ msgid "installed"
-#~ msgstr "installato"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "localizza l&#39;hostname a seconda delle sue sottoreti"
-
-#~ msgid "not installed"
-#~ msgstr "non installato"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "impedisci la cache di risposte <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr> negative"
-
-#~ msgid "query port"
-#~ msgstr "porta per le richieste"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmessi / ricevuti"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "Rete"
-
-#~ msgid "all"
-#~ msgstr "tutti"
-
-#~ msgid "Code"
-#~ msgstr "Codice"
-
-#~ msgid "Distance"
-#~ msgstr "Distanza"
-
-#~ msgid "Legend"
-#~ msgstr "Legenda"
-
-#~ msgid "Library"
-#~ msgstr "Libreria"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "leggi il manuale di &#39;%s&#39;"
-
-#~ msgid "Package Manager"
-#~ msgstr "Gestore pacchetti"
-
-#~ msgid "Service"
-#~ msgstr "Servizio"
-
-#~ msgid "Statistics"
-#~ msgstr "Statistiche"
-
-#~ msgid "zone"
-#~ msgstr "Zona"
diff --git a/po/it/commands.po b/po/it/commands.po
deleted file mode 100644
index c14b910..0000000
--- a/po/it/commands.po
+++ /dev/null
@@ -1,99 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-03 13:52+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr "Una breve descrizione testuale del comando configurato"
-
-msgid "Access command with"
-msgstr "Accesso comando con"
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-"Consentire l'esecuzione del comando e il download del suo output senza "
-"previa autenticazione"
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-"Consente all'utente di fornire ulteriori argomenti della riga di comando"
-
-msgid "Arguments:"
-msgstr "Argomenti:"
-
-msgid "Binary data not displayed, download instead."
-msgstr "I dati binari non vengono visualizzati, ma possono essere scaricati."
-
-msgid "Code:"
-msgstr "Codice:"
-
-msgid "Collecting data..."
-msgstr "Raccolta dei dati..."
-
-msgid "Command"
-msgstr "Comando"
-
-msgid "Command failed"
-msgstr "Comando fallito"
-
-msgid "Command line to execute"
-msgstr "Riga di comando da eseguire"
-
-msgid "Command successful"
-msgstr "Comando riuscito"
-
-msgid "Command:"
-msgstr "Comando:"
-
-msgid "Configure"
-msgstr "Configura"
-
-msgid "Custom Commands"
-msgstr "Comandi Personalizzati"
-
-msgid "Custom arguments"
-msgstr "Argomenti Personalizzati"
-
-msgid "Dashboard"
-msgstr "Dashboard"
-
-msgid "Description"
-msgstr "Descrizione"
-
-msgid "Download"
-msgstr "Download"
-
-msgid "Failed to execute command!"
-msgstr "Impossibile eseguire il comando!"
-
-msgid "Link"
-msgstr "Collegamento"
-
-msgid "Loading"
-msgstr "Caricamento"
-
-msgid "Public access"
-msgstr "Accesso Pubblico"
-
-msgid "Run"
-msgstr "Esegui"
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-"Questa pagina consente di configurare i comandi della shell personalizzate "
-"che possono essere facilmente richiamati dall'interfaccia web."
-
-msgid "Waiting for command to complete..."
-msgstr "In attesa del comando da completare..."
diff --git a/po/it/coovachilli.po b/po/it/coovachilli.po
deleted file mode 100644
index dbf5b96..0000000
--- a/po/it/coovachilli.po
+++ /dev/null
@@ -1,75 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2013-02-03 13:43+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Configurazione della Rete"
-
-msgid "RADIUS configuration"
-msgstr "Configurazione RAGGIO"
-
-msgid "UAM and MAC Authentication"
-msgstr "Autenticazione UAM e MAC"
-
-#~ msgid "General configuration"
-#~ msgstr "Configurazione generale"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Impostazioni generali di CoovaChilli"
-
-#~ msgid "Command socket"
-#~ msgstr "Socket di comando"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "Socket UNIX usato per la comunicazione con chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Intervallo di aggiornamento configurazione"
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Rilegge il file di configurazione ed esegue una ricerca DNS ogni "
-#~ "intervallo in secondi. Questo ha lo stesso risultato dell'invio del "
-#~ "segnale HUP. Se l'intervallo è 0 (zero) questa funzionalità è "
-#~ "disabilitata."
-
-#~ msgid "Pid file"
-#~ msgstr "File Pid"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "Configurazione TUN/TAP"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Configurazione Rete/TUN"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Server DNS Primario"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Server DNS Secondario"
-
-#~ msgid "Domain name"
-#~ msgstr "Nome di dominio"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Specifica un pool di indirizzi IP dinamici"
-
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr "Indirizzo di rete dell'interfaccia di uplink (CIDR notazione)"
diff --git a/po/it/ddns.po b/po/it/ddns.po
deleted file mode 100644
index 1e6d24d..0000000
--- a/po/it/ddns.po
+++ /dev/null
@@ -1,89 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2013-02-03 13:53+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "Controlla se cambia l'IP ogni"
-
-msgid "Check-time unit"
-msgstr "Check-time unit"
-
-msgid "Custom update-URL"
-msgstr "URL di aggiornamento personalizzato"
-
-msgid "Dynamic DNS"
-msgstr "DNS Dinamico"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"DNS Dinamico permette al tuo router di essere raggiunto con un indirizzo "
-"statico anche nel caso in cui tu disponga di un indirizzo IP dinamico."
-
-msgid "Enable"
-msgstr "Abilita"
-
-msgid "Event interface"
-msgstr "Evento interfaccia"
-
-msgid "Force update every"
-msgstr "Forza aggiornamento ogni"
-
-msgid "Force-time unit"
-msgstr "Unità di tempo per l'aggiornamento"
-
-msgid "Hostname"
-msgstr "Nome Host"
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid "Network"
-msgstr "Rete"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "Su quale interfaccia dovrebbe iniziare il processo di script DDNS."
-
-msgid "Password"
-msgstr "Password"
-
-msgid "Service"
-msgstr "Servizio"
-
-msgid "Source of IP address"
-msgstr "Origine dell'indirizzo IP"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Nome Utente"
-
-msgid "custom"
-msgstr "personalizzato"
-
-# Hours
-msgid "h"
-msgstr "o"
-
-msgid "interface"
-msgstr "interfaccia"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
-
-msgid "network"
-msgstr "rete"
diff --git a/po/it/diag_core.po b/po/it/diag_core.po
deleted file mode 100644
index 39d4ced..0000000
--- a/po/it/diag_core.po
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-03 13:54+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr "Configura Diagnostici"
-
-msgid "Diagnostics"
-msgstr "Diagnostiche"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Le funzioni di diagnostica disponibili in questo menu dipendono dai moduli "
-"che avete installato sul vostro dispositivo."
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Gli stumenti nel menù possono servirti per diagnosi e test per aiutarti "
-"nello scoprire le problematiche."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Con questo menu puoi configurare la diagnostica di rete, come la scansione "
-"di un dispositivo di rete o dei ping di test."
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d_diag"
diff --git a/po/it/diag_devinfo.po b/po/it/diag_devinfo.po
deleted file mode 100644
index 767245c..0000000
--- a/po/it/diag_devinfo.po
+++ /dev/null
@@ -1,221 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-09 20:40+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Actions"
-msgstr "Azioni"
-
-msgid "Add"
-msgstr "Aggiungi"
-
-msgid "Beginning of MAC address range"
-msgstr "Inizio del campo di indirizzi MAC"
-
-msgid "Config Phone Scan"
-msgstr "Configura Scansione Telefono"
-
-msgid "Configure"
-msgstr "Configura"
-
-msgid "Configure Scans"
-msgstr "Configura Scansioni"
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-"Configurare la scansione per i dispositivi su reti specifiche. Diminuendo il "
-"'Timeout', 'Numero Ripetizioni' e/o ''Pausa tra le Richieste'  è possibile "
-"aumentare la velocità delle scansioni, ma può anche non riuscire a trovare "
-"alcuni dispositivo."
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-"Configurare la scansione dei dispositivi SIP supportati  su reti specifiche. "
-"Diminuendo il 'Timeout', 'Numero ripetizioni' e / o ''Pausa tra le "
-"richieste' è possibile aumentare la velocità delle scansioni, ma può anche "
-"non riuscire a trovare alcuni dispositivo."
-
-msgid "Delete"
-msgstr "Elimina"
-
-msgid "Device Scan Config"
-msgstr "Configura Scansione Periferica"
-
-msgid "Device Type"
-msgstr "Tipo di Periferica"
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr "Periferiche in Rete"
-
-msgid "Edit"
-msgstr "Modifica"
-
-msgid "Enable"
-msgstr "Attiva"
-
-msgid "End of MAC address range"
-msgstr "Fine intervallo dell' indirizzo MAC"
-
-msgid "Go to relevant configuration page"
-msgstr "Vai alla pagina di configurazione rilevanti"
-
-msgid "IP Address"
-msgstr "Indirizzo IP"
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid "Invalid"
-msgstr "Non valido"
-
-msgid "Link to Device"
-msgstr "Collegamento alla Periferica"
-
-msgid "MAC Address"
-msgstr "Indirizzo MAC"
-
-msgid "MAC Device Info Overrides"
-msgstr "Informazioni su Sostituzioni della Periferica MAC"
-
-msgid "MAC Device Override"
-msgstr "Sostituzione del MAC del dispositivo"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"La gamma e le informazioni MAC  utilizzate per eseguire la sostituzione dei "
-"database di sistema e IEEE"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Millisecondi di attesa tra le richieste (predefinito: 100)"
-
-msgid "Model"
-msgstr "Modello"
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Network Device Scan"
-msgstr "Dispositivo Scansione della Rete"
-
-msgid "Network Device Scanning Configuration"
-msgstr "Configurazione Dispositivo di Scansione della Rete"
-
-msgid "Networks to scan for devices"
-msgstr "Reti da scandire per i dispositivi"
-
-msgid "Networks to scan for supported devices"
-msgstr "Reti da scandire per i dispositivi supportati"
-
-msgid "No SIP devices"
-msgstr "Nessun dispositivo SIP"
-
-msgid "No devices detected"
-msgstr "Nessun dispositivo rilevato"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Numero di volte delle richieste da inviare (predefinito: 1)"
-
-msgid "OUI Owner"
-msgstr "Proprietario OUI"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Ignora le informazioni restituite dal MAC su Script per le Informazioni sul "
-"dispositivo (mac-in-devinfo) per un determinato intervallo di indirizzi MAC"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr "Rilevamento (richiede alcuni minuti)"
-
-msgid "Phone Information"
-msgstr "Informazione Telefono"
-
-msgid "Phone Scan"
-msgstr "Rilevamento Telefono"
-
-msgid "Phone Scanning Configuration"
-msgstr "Configurazione Rilevamento Telefono"
-
-msgid "Phones"
-msgstr "Telefoni"
-
-msgid "Ports"
-msgstr "Porte"
-
-msgid "Raw"
-msgstr "Raw"
-
-msgid "Repeat Count"
-msgstr "Ripetizione Conteggio"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr "Ripetizione Rilevamento (richiede alcuni minuti)"
-
-msgid "SIP Device Information"
-msgstr "Informazioni Periferica SIP"
-
-msgid "SIP Device Scan"
-msgstr "Rilevamento Periferica SIP"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Configurazione Rilevamento Periferica SIP"
-
-msgid "SIP Devices on Network"
-msgstr "Periferiche SIP in Rete"
-
-msgid "SIP devices discovered for"
-msgstr "Periferiche SIP rilevate per"
-
-msgid "Scan for devices on specified networks."
-msgstr "Rilevamento per periferiche su reti specificate."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr "Rilevamento per periferiche SIP supportate sulle reti specificate."
-
-msgid "Scanning Configuration"
-msgstr "Configurazione Rilevamento"
-
-msgid "Scans for devices on specified networks."
-msgstr "Rilevamento periferiche sulle reti specificate."
-
-msgid "Sleep Between Requests"
-msgstr "Attendi tra le richieste"
-
-msgid "Subnet"
-msgstr "Sottorete"
-
-msgid "This section contains no values yet"
-msgstr "Questa sezione non contiene ancora valori"
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Tempo di attesa per le risposte in secondi (predefinito: 10)"
-
-msgid "Timeout"
-msgstr "Timeout"
-
-msgid "Use Configuration"
-msgstr "Usa Configurazione"
-
-msgid "Vendor"
-msgstr "Produttore"
-
-msgid "check other networks"
-msgstr "Controlla altre reti"
diff --git a/po/it/ffwizard.po b/po/it/ffwizard.po
deleted file mode 100644
index f00ce41..0000000
--- a/po/it/ffwizard.po
+++ /dev/null
@@ -1,180 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-09 21:27+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Permette di trasferire le statistiche in forma anonima su questo nodo"
-
-msgid "Channel"
-msgstr "Canale"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Selezionare questa opzione per proteggere la LAN da altri nodi o clienti"
-
-msgid "Configure network"
-msgstr "Configura la Rete"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr "Collegare il nodo con gli altri nodi con un tunnel via Internet."
-
-msgid "DHCP IP range"
-msgstr "Intervallo IP DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP assegna automaticamente gli indirizzi IP ai client"
-
-msgid "DNS Server"
-msgstr "Server DNS"
-
-msgid "Enable DHCP"
-msgstr "Attiva DHCP"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "Heartbeat"
-msgstr "Heartbeat"
-
-msgid "IP address"
-msgstr "Indirizzo IP"
-
-msgid "L2gvpn tunnel"
-msgstr "Tunnel L2gvpn"
-
-msgid "Limit download bandwidth"
-msgstr "Limitare la banda passante in download"
-
-msgid "Limit upload bandwidth"
-msgstr "Limitare la banda passante in upload"
-
-msgid "Mesh IP address"
-msgstr "Indirizzo IP Mesh"
-
-msgid "Mesh IPv6 Address"
-msgstr "Indirizzo IPv6 Mesh"
-
-msgid "Netmask"
-msgstr "Maschera Rete"
-
-msgid "Password"
-msgstr "Password"
-
-msgid "Password confirmation"
-msgstr "Conferma Password"
-
-msgid "Password successfully changed"
-msgstr "Password modificata correttamente"
-
-msgid "Protect LAN"
-msgstr "Proteggi LAN"
-
-msgid "Protocol"
-msgstr "Protocollo"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-"Selezionare questa casella di controllo per configurare le interfacce di "
-"rete"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Selezionare questa opzione per consentire ad altri di utilizzare la "
-"connessione per accedere a Internet."
-
-msgid "Share your internet connection"
-msgstr "Condividi la tua connessione a Internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"L'intervallo di IP i quali vengono assegnati ai client gli indirizzi IP (ad "
-"esempio 10.1.2.1/28). Se si tratta di un intervallo all'interno della rete "
-"Mesh, allora sarà annunciato come HNA. Ogni altro intervallo userà il NAT. "
-"Se lasciato vuoto, le impostazioni predefinite del profilo della comunità "
-"verrà utilizzato."
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "L'indirizzo IPv6 viene calcolato automaticamente."
-
-msgid "The protocol to use for internet connectivity."
-msgstr "Il protocollo da utilizzare per la connettività internet."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Si tratta di un indirizzo univoco nella mesh (ad esempio 10.1.1.1) e deve "
-"essere registrato presso la comunità locale."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"In questo modo isi mposta una nuova interfaccia virtuale wireless in "
-"modalità Punto di Accesso."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Questa procedura guidata vi aiuterà a configurare il router per Freifunk o "
-"un'altra comunità di Rete wireless simile."
-
-msgid "Unknown Error"
-msgstr "Errore Sconosciuto"
-
-msgid "Username"
-msgstr "Nome Utente"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Punto di Accesso Virtuale (VAP)"
-
-msgid "Wizard"
-msgstr "Procedura Guidata"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Il dispositivo e nodi adiacenti devono utilizzare lo stesso canale."
-
-msgid "dhcp"
-msgstr "dhcp"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "static"
-msgstr "statico"
-
-msgid "Configure this interface."
-msgstr "Configura questa interfaccia."
-
-msgid "recommended"
-msgstr "raccomandato"
-
-msgid "Basic settings"
-msgstr "Impostazioni Base"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Le impostazioni base sono incomplete. Andare in"
-
-msgid "Error"
-msgstr "Errore"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-"Non è possibile utilizzare la procedura guidata perché alcuni valori "
-"necessari sono mancanti."
-
-msgid "and fill out all required fields."
-msgstr "e compilare tutti i campi richiesti."
diff --git a/po/it/firewall.po b/po/it/firewall.po
deleted file mode 100644
index 2fcfd64..0000000
--- a/po/it/firewall.po
+++ /dev/null
@@ -1,499 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-04-19 23:05+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr "%s%s con %s"
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr " -- Selezionare --"
-
-msgid "-- custom --"
-msgstr " -- personalizzata --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> e limita a %s"
-
-msgid "Action"
-msgstr "Azione"
-
-msgid "Add"
-msgstr "Aggiungi"
-
-msgid "Add and edit..."
-msgstr "Aggiungi e edita..."
-
-msgid "Advanced Settings"
-msgstr "Opzioni Avanzate"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Permetti routing da <em>zone di origini</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Permetti rountin a <em>zone di destinazione</em>:"
-
-msgid "Any"
-msgstr "Qualsiasi"
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr "Regole Personalizzate"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Le regole personalizzate ti permettorno di eseguire comandi iptables "
-"arbitrari che non solo altrimenti coperti dall'applicazione firewall. I "
-"comandi sono eseguiti dopo ogni riavvio del firewall, giusto dopo le altre "
-"regole che son state caricate."
-
-msgid "Destination IP address"
-msgstr "Indirizzo IP destinazione"
-
-msgid "Destination address"
-msgstr "Indirizzo di destinazione"
-
-msgid "Destination port"
-msgstr "Porta di destinazione"
-
-msgid "Destination zone"
-msgstr "Zona di destinazione"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr ""
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr "Porta Esterna"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr "Firewall - Opzioni delle Zone"
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Opzioni Generali"
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 only"
-msgstr "Solo IPv4"
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr "Solo IPv6"
-
-msgid "Input"
-msgstr ""
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr "Indirizzo IP Interno"
-
-msgid "Internal port"
-msgstr "Porta interna"
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr ""
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr ""
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr "Protocollo"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# msgid "Traffic Redirection"
-# msgstr ""
-# msgid ""
-# "Traffic redirection allows you to change the destination address of "
-# "forwarded packets."
-# msgstr ""
-# msgid "Overview"
-# msgstr ""
-# msgid "Name"
-# msgstr ""
-# msgid "Source zone"
-# msgstr ""
-# msgid "Source MAC-address"
-# msgstr ""
-# msgid "Source port"
-# msgstr ""
-# msgid "Protocol"
-# msgstr ""
-msgid "Source IP address"
-msgstr "Indirizzo IP di origine"
-
-msgid "Source MAC address"
-msgstr "Indirizzo MAC di origine"
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr "Indirizzo di origine"
-
-msgid "Source port"
-msgstr "Porta di origine"
-
-msgid "Source zone"
-msgstr "Zona di origine"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr ""
-
-msgid "accept"
-msgstr "accetta"
-
-msgid "any"
-msgstr "qualsiasi"
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr "rifiuta"
-
-#~ msgid "Destination"
-#~ msgstr "Destinazione"
-
-#~ msgid "Source"
-#~ msgstr "Origine"
-
-#~ msgid "Accept input"
-#~ msgstr "Accetta INPUT"
-
-#~ msgid "(optional)"
-#~ msgstr "(facoltativo)"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Porta interna (opzionale)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Opzioni Avanzate"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Regole Avanzate"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Le regole avanzate consentono di personalizzare il firewall per le tue "
-#~ "necessità. Solo le nuove connessioni saranno combinate. I pacchetti "
-#~ "appartenenti alle connessioni già aperte sono automaticamente autorizzate "
-#~ "ad oltrepassare il firewall."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Regole Personalizzate (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Dispositivo"
-
-#~ msgid "Rules"
-#~ msgstr "Regole"
diff --git a/po/it/freifunk-policyrouting.po b/po/it/freifunk-policyrouting.po
deleted file mode 100644
index 61ac6c0..0000000
--- a/po/it/freifunk-policyrouting.po
+++ /dev/null
@@ -1,69 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-02-09 20:22+0200\n"
-"PO-Revision-Date: 2013-02-09 20:27+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-"Tutto il traffico dalle interfacce appartenenti a tali zone saranno inviate "
-"tramite un gateway nella rete mesh."
-
-msgid "Enable Policy Routing"
-msgstr "Attiva la politica di instradamento"
-
-msgid "Fallback to mesh"
-msgstr "Posizione di sicurezza in mesh"
-
-msgid "Firewall zones"
-msgstr "Zone Firewall"
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-"Se nessun percorso predefinito viene ricevuto dalla rete mesh, il traffico "
-"che fa parte delle zone del firewall selezionato verranno instradate tramite "
-"la connessione a Internet come ripiego. Se non si desidera questo  invece "
-"di bloccare il traffico è necessario selezionare questa opzione."
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-"Se il proprio gateway non è disponibile, ripiego per il gateway predefinito "
-"mash."
-
-msgid "Policy Routing"
-msgstr "Politica di Instradamento"
-
-msgid "Strict Filtering"
-msgstr "Livello massimo di filtraggio"
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
-"Queste pagine possono essere utilizzati per impostare la politica di "
-"instradamento per le zone del firewall determinati. Questo è utile se è "
-"necessario utilizzare la vostra connessione internet per de stesso, ma non "
-"si desidera condividere con gli altri (questo è il motivo per cui può anche "
-"essere chiamato 'Modalità Ego'). Il tuo traffico viene poi inviato tramite "
-"la tua connessione a Internet mentre il traffico proveniente dalla rete "
-"utilizzerà un altro gateway in mesh."
diff --git a/po/it/freifunk.po b/po/it/freifunk.po
deleted file mode 100644
index 601d67f..0000000
--- a/po/it/freifunk.po
+++ /dev/null
@@ -1,417 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2013-02-09 20:21+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr "Difettoso (ETX > 10)"
-
-msgid "Basic Settings"
-msgstr "Impostazioni Base"
-
-msgid "Basic settings"
-msgstr "Impostazioni Base"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Le impostazioni base sono incomplete. Si prega di andare a"
-
-msgid "Basic system settings"
-msgstr "Impostazioni Base del Sistema"
-
-msgid "Bitrate"
-msgstr "Bitrate"
-
-msgid "Channel"
-msgstr "Canale"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-"Verificare la presenza di nuove versioni del firmware ed eseguire gli "
-"aggiornamenti automatici."
-
-msgid "Client network size"
-msgstr "Dimensione Rete Client"
-
-msgid "Community"
-msgstr "Comunità"
-
-msgid "Community profile"
-msgstr "Profilo Comunità"
-
-msgid "Community settings"
-msgstr "Impostazioni Comunità"
-
-msgid "Confirm Upgrade"
-msgstr "Conferma Aggiornamento"
-
-msgid "Contact"
-msgstr "Contatto"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr "Le informazioni di contatto sono incomplete. Si prega di andare a"
-
-msgid "Coordinates"
-msgstr "Coordinate"
-
-msgid "Country code"
-msgstr "Codice Nazione"
-
-msgid "Default routes"
-msgstr "Instradamenti Predefiniti"
-
-msgid "Disable default content"
-msgstr "Disattivare contenuto predefinito"
-
-msgid "Diversity is enabled for device"
-msgstr "La diversità è abilitata per il dispositivo"
-
-msgid "E-Mail"
-msgstr "E-Mail"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr "Modifica indice pagina"
-
-msgid "Enable IPv6"
-msgstr "Attiva IPv6"
-
-msgid "Error"
-msgstr "Errore"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "Trova le coordinate con OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "Freifunk"
-
-msgid "Freifunk Overview"
-msgstr "Panoramica Freifunk"
-
-msgid "Freifunk Remote Update"
-msgstr "Aggiornamento Remoto Freifunk"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "Go to"
-msgstr "Vai a"
-
-msgid "Good (2 < ETX < 4)"
-msgstr "Buono (2 < ETX < 4)"
-
-msgid "Green"
-msgstr "Verde"
-
-msgid "Hello and welcome in the network of"
-msgstr "Ciao e benvenuto nella rete di"
-
-msgid "Hide OpenStreetMap"
-msgstr "Nascondi OpenStreetMap"
-
-msgid "Homepage"
-msgstr "Homepage"
-
-msgid "Hostname"
-msgstr "Nome Host"
-
-msgid "IPv6 Config"
-msgstr "Configura IPv6"
-
-msgid "IPv6 Prefix"
-msgstr "Prefisso IPv6"
-
-msgid "IPv6 network in CIDR notation."
-msgstr "Rete IPv6 in notazione CIDR."
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-"Se selezionata, l'elemento di contenuto predefinito non viene visualizzato."
-
-msgid "If you are interested in our project then contact the local community"
-msgstr "Se siete interessati al nostro progetto, contattare la comunità locale"
-
-msgid "Index Page"
-msgstr "Indice Pagina"
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"L'accesso a Internet dipende dalle condizioni tecniche e organizzative e può "
-"o non può funzionare per voi."
-
-msgid "It is operated by"
-msgstr "E' gestito da"
-
-msgid "Keep configuration"
-msgstr "Mantieni configurazione"
-
-msgid "Latitude"
-msgstr "Latitudine"
-
-msgid "Legend"
-msgstr "Legenda"
-
-msgid "Load"
-msgstr "Carica"
-
-msgid "Local Time"
-msgstr "Ora Locale"
-
-msgid "Location"
-msgstr "Posizione"
-
-msgid "Longitude"
-msgstr "Longitudine"
-
-msgid "Map"
-msgstr "Mappa"
-
-msgid "Map Error"
-msgstr "Errore Mappa"
-
-msgid "Memory"
-msgstr "Memoria"
-
-msgid "Mesh prefix"
-msgstr "Prefisso Rete"
-
-msgid "Metric"
-msgstr "Metrica"
-
-msgid "Mode"
-msgstr "Modalità"
-
-msgid "Network"
-msgstr "Rete"
-
-msgid "Network for client DHCP addresses"
-msgstr "Rete per indirizzi Client DHCP"
-
-msgid "Nickname"
-msgstr "Nome Nick"
-
-msgid "No default routes known."
-msgstr "Nessun instradamento predefinito conosciuto."
-
-msgid "Notice"
-msgstr "Avviso"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr "Operatore"
-
-msgid "Orange"
-msgstr "Arancio"
-
-msgid "Overview"
-msgstr "Panoramica"
-
-msgid "Package libiwinfo required!"
-msgstr "Il pacchetto libiwinfo è richiesto!"
-
-msgid "Phone"
-msgstr "Telefono"
-
-msgid "Please fill in your contact details below."
-msgstr "Inserisci i tuoi dati di contatto qui sotto."
-
-msgid "Please set your contact information"
-msgstr "Vi preghiamo di impostare le informazioni di contatto"
-
-msgid "Power"
-msgstr "Potenza"
-
-msgid "Processor"
-msgstr "Processore"
-
-msgid "Profile"
-msgstr "Profilo"
-
-msgid "Profile (Expert)"
-msgstr "Profilo (Esperto)"
-
-msgid "Realname"
-msgstr "Nome Reale"
-
-msgid "Red"
-msgstr "Rosso"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-"Selezionare la propria posizione con un clic del mouse sulla mappa. La mappa "
-"viene visualizzata solo se si è connessi a Internet."
-
-msgid "Show OpenStreetMap"
-msgstr "Mostra OpenStreetMap"
-
-msgid "Show on map"
-msgstr "Mostra sulla mappa"
-
-msgid "Signal"
-msgstr "Segnale"
-
-msgid "Splash"
-msgstr "Splash"
-
-msgid "Start Upgrade"
-msgstr "Avvia Aggiornamento"
-
-msgid "Statistics"
-msgstr "Statistiche"
-
-msgid "Status"
-msgstr "Stato"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr "Ancora utilizzabile (4 < ETX < 10)"
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "TX"
-msgstr "TX"
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Il pacchetto <em>libiwinfo</em> non è installato. Si deve installare questo "
-"componente per usare di configurazione wireless!"
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-"Il servizio OLSRd non è configurato per acquisire i dati di posizione della "
-"rete. <br/> Assicurarsi che il plugin nameservice sia configurato "
-"correttamente e che l'opzione <em>latlon_file</ em> è abilitata."
-
-msgid "The installed firmware is the most recent version."
-msgstr "Il firmware installato è la versione più recente."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-"Queste sono le impostazioni di base per la vostra comunità locale wireless. "
-"Queste impostazioni definiscono i valori predefiniti per la procedura "
-"guidata e non influenzano la configurazione attuale del router."
-
-msgid "These are the settings of your local community."
-msgstr "Queste sono le impostazioni della vostra comunità locale."
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-"Queste pagine vi aiuteranno a configurare il router per Freifunk o reti "
-"wireless della comunità simile."
-
-msgid "This is the access point"
-msgstr "Questo è il punto di accesso"
-
-msgid "Update Settings"
-msgstr "Aggiorna impostazioni"
-
-msgid "Update available!"
-msgstr "Aggiornamento disponibile!"
-
-msgid "Uptime"
-msgstr "Tempo di attività"
-
-msgid "Verify downloaded images"
-msgstr "Verifica delle immagini scaricate"
-
-msgid "Very good (ETX < 2)"
-msgstr "Molto buono (ETX < 2)"
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Siamo un'iniziativa per creare una rete libera, indipendente e aperto "
-"wireless mesh."
-
-msgid "Wireless Overview"
-msgstr "Panoramica Wireless"
-
-msgid "Yellow"
-msgstr "Giallo"
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-"È possibile visualizzare contenuti aggiuntivi nella pagina indice pubblica "
-"inserendo XHTML valida nel modulo sottostante. <br/> I titoli dovrebbero "
-"essere racchiusi tra &lt;h2&gt; e &lt;/h2&gt;."
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-"È possibile trovare ulteriori informazioni sull'iniziativa Freifunk globale "
-"a"
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-"È possibile modificare manualmente il profilo selezionato della comunità qui"
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-"È necessario selezionare un profilo prima di poterlo modificare. Per "
-"selezionare un profilo andare a"
-
-msgid "and fill out all required fields."
-msgstr "e compilare tutti i campi richiesti."
-
-msgid "buffered"
-msgstr "buffered"
-
-msgid "cached"
-msgstr "in memoria cache"
-
-msgid "e.g."
-msgstr "es."
-
-msgid "free"
-msgstr "libero"
-
-msgid "to disable it."
-msgstr "per disattivarlo."
-
-msgid "used"
-msgstr "usato"
-
-msgid "wireless settings"
-msgstr "Impostazioni Wireless"
diff --git a/po/it/hd_idle.po b/po/it/hd_idle.po
deleted file mode 100644
index 09c7c09..0000000
--- a/po/it/hd_idle.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2013-02-03 13:54+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "Disco"
-
-msgid "Enable"
-msgstr "Abilita"
-
-msgid "Enable debug"
-msgstr "Abilita debug"
-
-msgid "Idle-time"
-msgstr "Tempo di inattività"
-
-msgid "Idle-time unit"
-msgstr "Unità di misura del tempo di inattività"
-
-msgid "Settings"
-msgstr "Opzioni"
-
-# Hours
-msgid "h"
-msgstr "ora/e"
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"HD-idle è un programma per mettere in standby i dischi esterni dopo un "
-"periodo di inattività."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
diff --git a/po/it/meshwizard.po b/po/it/meshwizard.po
deleted file mode 100644
index 61186c1..0000000
--- a/po/it/meshwizard.po
+++ /dev/null
@@ -1,142 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-02-06 18:07+0200\n"
-"PO-Revision-Date: 2013-02-09 20:46+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr "Attivare o disattivare la configurazione IPv6 a livello globale."
-
-msgid "Channel"
-msgstr "Canale"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr "Abilita per proteggere la tua LAN da altri nodi o clienti"
-
-msgid "Cleanup config"
-msgstr "Ripulisci config"
-
-msgid "Configure this interface"
-msgstr "Configura questa interfaccia"
-
-msgid "DHCP IP range"
-msgstr "Range DHCP IP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP assegnerà indirizzi ip ai client"
-
-msgid "Enable DHCP"
-msgstr "Abilità DHCP"
-
-msgid "Enable RA"
-msgstr "Attiva RA"
-
-msgid "Enabled"
-msgstr "Attivato"
-
-msgid "General Settings"
-msgstr "Impostazioni generali"
-
-msgid "IPv6 Settings"
-msgstr "Impostazioni IPv6"
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-"Se questa opzione è selezionata, config viene pulita prima di nuove opzioni "
-"di configurazione."
-
-msgid "Interfaces"
-msgstr "Interfacce"
-
-msgid "Mesh IP address"
-msgstr "Rete indirizzo IP"
-
-msgid "Mesh IPv6 address"
-msgstr "Rete indirizzo IPv6"
-
-msgid "Mesh Wizard"
-msgstr "Configurazione Rete"
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-"Nota: questo permette di configurare questa interfaccia per il funzionamento "
-"in rete, vale a dire aggiungere nella zona 'Freifunk' e consentire OLSR."
-
-msgid "Protect LAN"
-msgstr "Proteggi LAN"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Selezionare per permettere ad altri di usare la tua connessione per accedere "
-"a internet."
-
-msgid "Send router advertisements on this device."
-msgstr "Inviare annunci router su questo dispositivo."
-
-msgid "Share your internet connection"
-msgstr "Condividi la tua connessione internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Il range IP dal quale i client ricevono gli indirizzi (es. 10.1.2.1/28). Se "
-"questa subnet è all'interno della tua rete mesh, sarà annunciata as HNA. "
-"Ogni altro range userà il NAT. Se lasciato vuoto allora la scelta "
-"predefinita della community sarà usata."
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr "L'IP dato non è all'interno del range degli indirizzi di rete mesh"
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-"Si tratta di un indirizzo IPv6 unico in notazione CIDR (ad esempio "
-"2001:1:2:3::1/64) e deve essere registrato presso la comunità locale."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Questo è un indirizzo univoco nella mesh (es. 10.1.1.1) e deve essere "
-"accordato con la tua community."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Questo confgurerà una nuova interfaccia wireless virtuale in modalità Access "
-"Point."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Questo wizard ti assisterà nel setup del tuo router per l'uso in una rete "
-"wireless comunitaria come Freifunk o Ninux."
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Punto di Accesso Virtuale (VAP)"
-
-msgid "Wizard"
-msgstr "Creazione guidata"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Il tuo device a i nodi confinanti devono sare lo stesso canale."
-
-msgid "recommended"
-msgstr "raccomandato"
diff --git a/po/it/minidlna.po b/po/it/minidlna.po
deleted file mode 100644
index 8eb8507..0000000
--- a/po/it/minidlna.po
+++ /dev/null
@@ -1,194 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-09 21:07+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Opzioni avanzate"
-
-msgid "Album art names:"
-msgstr "Nome Copertina Album:"
-
-msgid "Announced model number:"
-msgstr "Numero modello annunciato:"
-
-msgid "Announced serial number:"
-msgstr "Numero seriale annunciato:"
-
-msgid "Browse directory"
-msgstr "Esplora directory"
-
-msgid "Collecting data..."
-msgstr "Recuperando i dati..."
-
-msgid "Database directory:"
-msgstr "Directory database:"
-
-msgid "Enable TIVO:"
-msgstr "Abilita TIVO:"
-
-msgid "Enable inotify:"
-msgstr "Abilita inotify:"
-
-msgid "Enable:"
-msgstr "Abilita:"
-
-msgid "Friendly name:"
-msgstr "Nome Comune:"
-
-msgid "General Settings"
-msgstr "Impostazioni generali"
-
-msgid "Interfaces:"
-msgstr "Interfaccie:"
-
-msgid "Log directory:"
-msgstr "Directory di log:"
-
-msgid "Media directories:"
-msgstr "Cartelle Supporto:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNA è un server il cui intento è di essere completamente compatibile "
-"con i DLNA/UPnP-AV client disponibili."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Numero del modello che il demone miniDLNA riporterà ai client nella sua "
-"descrizione XML."
-
-msgid "Music"
-msgstr "Musica"
-
-msgid "Network interfaces to serve."
-msgstr "Interfaccia di rete usata."
-
-msgid "Notify interval in seconds."
-msgstr "Intervallo di notifica in secondi."
-
-msgid "Notify interval:"
-msgstr "Intervallo di notifica:"
-
-msgid "Pictures"
-msgstr "Immagini"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "Porta per traffico (descrizione, SOAP, trasferimento supporto) HTTP:"
-
-msgid "Port:"
-msgstr "Porta:"
-
-msgid "Presentation URL:"
-msgstr "URL di Presentazione:"
-
-msgid "Root container:"
-msgstr "Contenitore Principale:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Serial number che il server miniDLNA invierà ai client nella descrizione "
-"XML."
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr "Imposta se si desidera personalizzare il nome da mostrare ai client."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Impostare questa opzione se si desidera specificare la cartella in cui si "
-"desidera archiviare i database MiniDLNA e le copertine della cache album."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-"Impostare questa opzione se si desidera specificare la cartella in cui si "
-"desidera che MiniDLNA archivi i propri file di registro."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"Impostare questa opzione per consentire il monitoraggio inotify per rilevare "
-"automaticamente i nuovi file."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"Impostare questo per abilitare il supporto per lo streaming di file .jpg e "
-".mp3 ad un supporto TiVo che supporta HMO."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Impostare questo parametro per far rispettare rigorosamente gli standard "
-"DLNA. Ciò consentirà sul lato server il ridimensionamento delle immagini "
-"JPEG di grandi dimensioni che possono influire negativamente sulle "
-"prestazioni JPEG del servizio su (almeno)  i prodotti Sony DLNA."
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Impostare la cartella che si desidera sottoporre a scansione. Se si desidera "
-"limitare la directory per un tipo di contenuto specifico, è possibile "
-"anteporre il tipo ('A' per l'audio, 'V' per video, 'P' per le immagini), "
-"seguito da una virgola, nella cartella (es. media_dir = A,/mnt/media/Music). "
-"Cartelle multiple possono essere specificate."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "Specificare il percorso del socket MiniSSDPd."
-
-msgid "Standard container"
-msgstr "Contenitore Standard"
-
-msgid "Strict to DLNA standard:"
-msgstr "Scrupolosamente DLNA standard:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"Il servizio miniDLNA è attivo, servo %d audio, %d video, %d file di "
-"immagine."
-
-msgid "The miniDLNA service is not running."
-msgstr "Il servizio miniDLNA non è in esecuzione."
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-"Questo è un elenco di nomi di file per verificare la presenza durante la "
-"ricerca di copertine degli album."
-
-msgid "Video"
-msgstr "Video"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "Stato miniDLNA"
-
-msgid "miniSSDP socket:"
-msgstr "Socket miniSSDP:"
diff --git a/po/it/mmc_over_gpio.po b/po/it/mmc_over_gpio.po
deleted file mode 100644
index e0f371a..0000000
--- a/po/it/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-02-03 13:57+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr "CLK_pin"
-
-msgid "CS_pin"
-msgstr "CS_pin"
-
-msgid "DI_pin"
-msgstr "DI_pin"
-
-msgid "DO_pin"
-msgstr "DO_pin"
-
-msgid "Enable"
-msgstr "Attiva"
-
-msgid "MMC/SD driver configuration"
-msgstr "Configurazione driver MMC/SD"
-
-msgid "Mode"
-msgstr "Modalità"
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Settings"
-msgstr "Opzioni"
diff --git a/po/it/multiwan.po b/po/it/multiwan.po
deleted file mode 100644
index 863b351..0000000
--- a/po/it/multiwan.po
+++ /dev/null
@@ -1,124 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-03 14:00+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Tentativi su WAN prima del Failover"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Tentativi su WAN prima del Recovery"
-
-msgid "Auto"
-msgstr "Auto"
-
-msgid "Collecting data..."
-msgstr "Raccolta di dati..."
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Configura le regole per inviare direttamente in uscita il traffico su una "
-"uplink Wan specifico."
-
-msgid "DNS Server(s)"
-msgstr "DNS Server(s)"
-
-msgid "Default Route"
-msgstr "Default Route"
-
-msgid "Destination Address"
-msgstr "Indirizzo di destinazione"
-
-msgid "Disable"
-msgstr "Disable"
-
-msgid "Enable"
-msgstr "Enable"
-
-msgid "Failing"
-msgstr "Fallimento"
-
-msgid "Failover Traffic Destination"
-msgstr "Destinazione del traffico in failover"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "Health Monitor ICMP Host(s)"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "Health Monitor ICMP Timeout"
-
-msgid "Health Monitor Interval"
-msgstr "Health Monitor Interval"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"L'health monitor monitora e identifica i cambiamenti e la manca di "
-"connessioni."
-
-msgid "KO"
-msgstr "KO"
-
-msgid "Load Balancer Distribution"
-msgstr "Bilanciamento del carico"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Carica Bilanciatore (Compatibilità)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Carica Bilanciatore (Performance)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr "Stato Multi-WAN"
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Regole del Traffico Multi-WAN"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Multi-WAN permette di usare uplink multipi per il bilanciamento del carico e "
-"la ridondanza da failover."
-
-msgid "None"
-msgstr "None"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "Ports"
-msgstr "Porte"
-
-msgid "Protocol"
-msgstr "Protocollo"
-
-msgid "Recovering"
-msgstr "Recupero"
-
-msgid "Source Address"
-msgstr "Indirizzo sorgente"
-
-msgid "Unknown"
-msgstr "Sconosciuto"
-
-msgid "WAN Interfaces"
-msgstr "Interfaccia WAN"
-
-msgid "WAN Uplink"
-msgstr "Collegamento ascendente WAN"
-
-msgid "all"
-msgstr "all"
diff --git a/po/it/ntpc.po b/po/it/ntpc.po
deleted file mode 100644
index 4b027b7..0000000
--- a/po/it/ntpc.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2013-02-03 13:56+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "Impostazione Ora"
-
-msgid "Count of time measurements"
-msgstr "Conteggio delle misure del tempo"
-
-msgid "Current system time"
-msgstr "Ora corrente del sistema"
-
-msgid "General"
-msgstr "Generale"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Offset frequency"
-msgstr "Offset delle frequenza"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Synchronizes the system time"
-msgstr "Sincronizza l'ora di sistema"
-
-msgid "Time Server"
-msgstr "Server Orologio"
-
-msgid "Time Servers"
-msgstr "Server dell'ora"
-
-msgid "Time Synchronisation"
-msgstr "Sincronizzazione dell'ora"
-
-msgid "Update interval (in seconds)"
-msgstr "Intervallo di aggiornamento (in secondi)"
-
-msgid "empty = infinite"
-msgstr "vuoto = infinito"
diff --git a/po/it/olsr.po b/po/it/olsr.po
deleted file mode 100644
index ed71673..0000000
--- a/po/it/olsr.po
+++ /dev/null
@@ -1,613 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-02-10 15:13+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Active MID announcements"
-msgstr "Annunci MID attivi"
-
-msgid "Active OLSR nodes"
-msgstr "Nodi OLSR attivi"
-
-msgid "Active host net announcements"
-msgstr "Annunci rete host attiva"
-
-msgid "Advanced Settings"
-msgstr "Opzioni avanzate"
-
-msgid "Allow gateways with NAT"
-msgstr "Permetti gateway con NAT"
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr "Permetti l'uso di gateway in uscita con NAT"
-
-msgid "Announce uplink"
-msgstr "Annuncia uplink"
-
-msgid "Announced network"
-msgstr "Rete da annnunciare"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr "Entrambi i valori devono essere nella notazione decimale puntata"
-
-msgid "Broadcast address"
-msgstr "Indirizzo di broadcast"
-
-msgid "Configuration"
-msgstr "Configurazione"
-
-msgid "Device"
-msgstr "Periferica"
-
-msgid "Display"
-msgstr "Display"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Download Config"
-msgstr "Configurazione Download"
-
-msgid "ETX"
-msgstr "ETX"
-
-msgid "Enable"
-msgstr "Attiva"
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-"Abitita SmartGateway. Se è disattivata, tutti gli altri parametri "
-"SmartGateway verrano ignorati. Predefinito è \"no\"."
-
-msgid "Enable this interface."
-msgstr "Attiva questa interfaccia."
-
-msgid "Enabled"
-msgstr "Attivato"
-
-msgid "Expected retransmission count"
-msgstr "Expected retransmission count"
-
-msgid "FIB metric"
-msgstr "Metrica FIB"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "General Settings"
-msgstr "Impostazioni Generali"
-
-msgid "General settings"
-msgstr "Impostazioni Generali"
-
-msgid "HNA"
-msgstr "HNA"
-
-msgid "HNA Announcements"
-msgstr "Annuncio di HNA"
-
-msgid "HNA interval"
-msgstr "Intervallo HNA"
-
-msgid "HNA validity time"
-msgstr "Durata di validità HNA"
-
-msgid "Hello"
-msgstr "Ciao"
-
-msgid "Hello interval"
-msgstr "Intervallo Saluto"
-
-msgid "Hello validity time"
-msgstr "Durata validità Saluto"
-
-msgid "Hna4"
-msgstr "Hna4"
-
-msgid "Hna6"
-msgstr "Hna6"
-
-msgid "Hops"
-msgstr "Hops"
-
-msgid "Hostname"
-msgstr "Nome Host"
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-"Isteresi del link (solo per la metrica hopocount). L'isteresi aggiunge "
-"robustezza alla sensibilità del link ma rallenta la registrazione dei "
-"vicini. Default è \"si\""
-
-msgid "IP Addresses"
-msgstr "Indirizzi IP"
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-"Versione IP da usare. Se entrambe sono selezionate una istanza di olsrd è "
-"avviata per ogni versione."
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-"Indirizzo di broadcast per i pacchetti OLSR. Per esempio potresti avere "
-"255.255.255.255. Default is 0.0.0.0, il che abilita l'uso dell'ip di "
-"broadcast di default."
-
-msgid "IPv4 source"
-msgstr "IPv4 source"
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-"IPv4 source per i pacchetti uscenti da OLSR. Predefinito \"0.0.0.0\", il che "
-"abilita l'uso dell'IP dell'interfaccia di uscita."
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 multicast"
-msgstr "IPv6 multicast"
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-"IPv6 network deve essere specificata in full notation, il prefisso deve "
-"essere in CIDR notation."
-
-msgid "IPv6 source"
-msgstr "IPv6 source"
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-"IPv6 src prefix. OLSRd sceglierà uno degli IP dell'interfaccia che matchano "
-"questo parametro. Predefinito è \"0::/0\", il che abilita l'uso di un IP non-"
-"linklocal."
-
-msgid "IPv6-Prefix of the uplink"
-msgstr "IPv6-Prefix dell' uplink"
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-"Se la rotta del gateway attuale viene modificata, il valore di ETX del "
-"gateway è moltiplicata per questo valore prima che sia comparato con nuovo "
-"valore.Il parametro può essere compreso tra 0.1 e 1.0, ma si consiglia un "
-"valore vicino a 1.0. <br /><b>ATTENZIONE:</b> Questo valore non deve essere "
-"utilizzato insieme con la metrica etx_ffeth!<br />Defaults a \"1.0\"."
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-"Se questo nodo usa un NAT per connettersi a Internet. Predefinito è \"si\"."
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "Impossibile connetersi al demone OLSR!"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr "L'uplink usa il NAT"
-
-msgid "Use hysteresis"
-msgstr "Usa l'isteresi"
-
-msgid "Version"
-msgstr "Versione"
-
-msgid "WLAN"
-msgstr "WLAN"
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr "Peso"
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-"Quando link multipli esisto tra gli hosts il peso dell'interfaccia viene "
-"usato. Normalmente il peso è automaticamente calcolato dal demone olsrd in "
-"base alle caratteristiche del link, ma qui puoi specificare un valore di "
-"contrappeso. OLSRd sceglierà il link con il più basso valore.<br><b>Nota:</"
-"b>Il peso dell'interfaccia è uso quando LinkQualityLevel è 0. Per ogni altro "
-"valore di LinkQualityLevel,  il valore di ETX è usato."
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-"Quale tipo di uplink è mostrato agli altri nodi. Un uplink è individuato "
-"cercando un HNA del tipo 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. Default "
-"setting is \"both\"."
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/it/openvpn.po b/po/it/openvpn.po
deleted file mode 100644
index 0ee9306..0000000
--- a/po/it/openvpn.po
+++ /dev/null
@@ -1,553 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-20 10:36+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr "Accetta opzioni inviate dal server"
-
-msgid "Add"
-msgstr "Aggiungi"
-
-msgid "Add route after establishing connection"
-msgstr "Aggiungi rotte dopo aver stabilito la connessione"
-
-msgid "Additional authentication over TLS"
-msgstr "Autenticazione addizionale over TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Permetti traffico client-client"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Permetti più client con lo stesso certificato"
-
-msgid "Allow only one session"
-msgstr "Permetti solo una sessione"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Permetti ai remote di cambiare il proprio IP o porta"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Numero massimo di clienti connessi"
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr "Numero massimo di nuove connessioni ammesse"
-
-msgid "Append log to file"
-msgstr "Appendi il log al file"
-
-msgid "Authenticate using username/password"
-msgstr "Autenticazione usando username/passoword"
-
-msgid "Automatically redirect default route"
-msgstr "Modifica automaticamente la default route"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Sotto c'è una lista di istanze di OpenVPN configurate e il loro stato "
-"corrente"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr "Cambia priorità del processo"
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr "Connetti attraverso un proxy Socks5"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "Connetti attraverso un proxy HTTP"
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr "Non effettuare il bind sull'indirizzo/porta locale"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Non eseguire realmente ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "Non aggiungere rotte automaticamente"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr "Non loggare il timestamps"
-
-msgid "Don't re-read key on restart"
-msgstr "Non rileggere le chiavi al riavvio"
-
-msgid "Don't require client certificate"
-msgstr "Non richiedere certificati dei client"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Non usare compressione lzo adattiva"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr "Misura empericamente l'MTU"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Abilita il supporto criptografico hardware per OpenSSL"
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Abilita frammentazione interna dei datagram"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr "Abilitato"
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Esegui un comando shell dopo che le rotte sono aggiunte"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Esegui un comando shell al cambio di ip remoto"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr "Istanza \"%s\""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr "Mantieni l'IP local al riavvio"
-
-msgid "Keep remote IP address on restart"
-msgstr "Mantieni l'IP remoto al riavvio"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Mantienti il device tun/tap aperto al riavvio"
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr "Limita le ripetizioni di messaggi nel log"
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr "Chiave privata local"
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr "Rendi il device tun ipv6 ready"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "OpenVPN istanze"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Ottimizza le scritture su TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr "Anteprima"
-
-msgid "PKCS#12 file containing keys"
-msgstr "PKCS#12 file containing keys"
-
-msgid "Pass environment variables to script"
-msgstr "Passa le variabili d'ambiente allo script"
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Protocol"
-msgstr "Protocollo"
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr "Avviato"
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr "Passa alla configurazione avanzata »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr "no"
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr "si (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Passa alla configurazione base"
diff --git a/po/it/p2pblock.po b/po/it/p2pblock.po
deleted file mode 100644
index 3be5010..0000000
--- a/po/it/p2pblock.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-20 10:18+0200\n"
-"PO-Revision-Date: 2012-04-20 10:21+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Block Time"
-msgstr "Periodo di censura"
-
-msgid "Enable P2P-Block"
-msgstr "Abilita la censura del P2P"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Protocolli di Layer7"
-
-msgid "P2P-Block"
-msgstr "Censura P2P"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"La censura, block, del P2P è un meccanismo per bloccare diversi protocolli "
-"peer-to-peer da parte di clienti non apparteneti alla whitelist."
-
-msgid "Portrange"
-msgstr "Range delle porte"
-
-msgid "Whitelisted IPs"
-msgstr "IP in whitelist"
-
-msgid "seconds"
-msgstr "secondi"
diff --git a/po/it/p910nd.po b/po/it/p910nd.po
deleted file mode 100644
index 8fd0dca..0000000
--- a/po/it/p910nd.po
+++ /dev/null
@@ -1,49 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-19 23:31+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Bidirectional mode"
-msgstr "Modalità bidirezionale"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Devi prima aver installato i pacchetti per avere il supporto dell'USB (kmod-"
-"usb-printer) o della porta parallela (kmod-lp)."
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Settings"
-msgstr "Impostazioni"
-
-msgid "TCP listener port."
-msgstr "Porta d'ascolto TCP."
-
-msgid "enable"
-msgstr "Attiva"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Server di stampa"
-
-#~ msgid "port_help"
-#~ msgstr "Porta d'aiuto"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr ""
-#~ "p910nd è in ascolto sulla porta 910+N. Ad es. 9100 per la prima stampante."
diff --git a/po/it/pbx-voicemail.po b/po/it/pbx-voicemail.po
deleted file mode 100644
index fe8c4bf..0000000
--- a/po/it/pbx-voicemail.po
+++ /dev/null
@@ -1,110 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-09 21:15+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr "Indirizzi e-mail che ricevono Voicemail"
-
-msgid "Enable Voicemail"
-msgstr "Attiva Voicemail"
-
-msgid "Global Voicemail Setup"
-msgstr "Attiva Voicemail"
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-"Qui è possibile configurare un messaggio vocale globale per questo PBX. "
-"Poiché questo sistema è destinato a girare su sistemi embedded come router, "
-"non vi è alcuna memorizzazione locale di segreteria - deve essere inviato "
-"via e-mail. Pertanto, è necessario configurare un server di posta in uscita "
-"(SMTP) (ad esempio del vostro ISP, di Google, Server Yahoo  SMTP), e di "
-"fornire un elenco di indirizzi che ricevono posta vocale registrato."
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-"Affinché questo PBX possa inviare messaggi di posta elettronica contenenti "
-"le registrazioni vocali, è necessario impostare un server SMTP qui. Il tuo "
-"ISP in genere fornisce un server SMTP per tale scopo. È inoltre possibile "
-"impostare un terzo SMTP  come quello fornito da Google o Yahoo."
-
-msgid "Last Sent Voicemail Log"
-msgstr "Ultimo file di registro Voicemail inviato"
-
-msgid "Local Storage Directory"
-msgstr "Cartella di memorizzazione Locale"
-
-msgid "No"
-msgstr "No"
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr "Server posta in uscita (SMTP)"
-
-msgid "SMTP Password"
-msgstr "Password SMTP"
-
-msgid "SMTP Port Number"
-msgstr "Numero Porta SMTP"
-
-msgid "SMTP Server Authentication"
-msgstr "Autenticazione Server SMTP"
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr "Nome Host Server SMTP o Indirizzo IP"
-
-msgid "SMTP User Name"
-msgstr "Nome Utente SMTP"
-
-msgid "Secure Connection Using TLS"
-msgstr "Connessione Sicura utilizzando TLS"
-
-msgid "Voicemail Setup"
-msgstr "Impostazione Voicemail"
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-"Quando si attiva la segreteria telefonica, si avrà la possibilità di "
-"specificare gli indirizzi e-mail che ricevono i messaggi vocali registrati. "
-"È inoltre necessario impostare un server SMTP di seguito."
-
-msgid "Yes"
-msgstr "Sì"
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-"È inoltre possibile conservare copie dei messaggi vocali sul dispositivo che "
-"esegue il PBX. Il percorso specificato in questo campo viene creato se non "
-"esiste. Attenzione lo spazio è limitato sui dispositivi embedded come "
-"router, e abilitare questa opzione solo se si sa cosa si sta facendo."
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
-"La tua password SMTP reale non viene visualizzata per la vostra protezione. "
-"Verrà modificato solo quando si modifica il valore in questa casella."
diff --git a/po/it/pbx.po b/po/it/pbx.po
deleted file mode 100644
index 3c9a190..0000000
--- a/po/it/pbx.po
+++ /dev/null
@@ -1,452 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-15 19:31+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Opzioni avanzate"
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/it/polipo.po b/po/it/polipo.po
deleted file mode 100644
index 6bc0669..0000000
--- a/po/it/polipo.po
+++ /dev/null
@@ -1,219 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-02-09 19:56+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Impostazioni avanzate"
-
-msgid "Allowed clients"
-msgstr "Clients permessi"
-
-# che è sto DNS RESOLVER?
-msgid "Always use system DNS resolver"
-msgstr "Usa sempre DNS resolver"
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Autenticazione base HTTP supportata. Fornire username e password in formato "
-"username:password."
-
-msgid "Configuration"
-msgstr "Configurazione"
-
-msgid "DNS and Query Settings"
-msgstr "Settaggi DNS e Query"
-
-msgid "DNS server address"
-msgstr "Indirizzo del server DNS"
-
-msgid "Delete cache files time"
-msgstr "Svuota la cache file dopo"
-
-msgid "Disk cache location"
-msgstr "Percorso della cache del disco"
-
-msgid "Do not query IPv6"
-msgstr "Non ignorare query IPv6"
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Abilita se la cache (del proxy) e' condivisa tra gli utenti."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Dimensione del primo segmento PMM (in bytes)"
-
-msgid "General Settings"
-msgstr "Impostazioni genarali"
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Quanta RAM dovrebbe Polipo usa come sua cache."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "In RAM cache size (in bytes)"
-
-msgid "Listen address"
-msgstr "Indirizzi ip da \"ascoltare\""
-
-msgid "Listen port"
-msgstr "Porta"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Percorso dove polipo memorizzerà i files di cache permanentemente. L'uso di "
-"un dispositivo di memorizzazione esterno è raccomandato. Lasciare vuoto per "
-"disabilitare la cache sul disco."
-
-msgid "Log file location"
-msgstr "Percorso del file di log"
-
-msgid "Log to syslog"
-msgstr "Pubblica il log nel syslog"
-
-msgid "Logging and RAM"
-msgstr "Registra in RAM"
-
-msgid "Never use system DNS resolver"
-msgstr "Non usare mai DNS RESOLVER"
-
-msgid "On-Disk Cache"
-msgstr "On-Disk Cache"
-
-msgid "PMM segments size (in bytes)"
-msgstr "DImensione segmenti PMM  (in bytes)"
-
-msgid "Parent Proxy"
-msgstr "Parent Proxy"
-
-msgid "Parent proxy address"
-msgstr "Indirizzo parent proxy"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Indirizzi del parent proxy (nel formato ip:porta), al quale Polipo dovrà "
-"inoltrare le richieste."
-
-msgid "Parent proxy authentication"
-msgstr "Autentificazione Parent proxy"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr "Stato Polipo"
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipo è un piccolo e veloce webcache proxy."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Poor Man's Multiplexing"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"Poor Man's Multiplexing (PMM) è una tecnica che simula il multiplexing "
-"richiedendo una nuova istanza del segmento. Questo server per abbassare la "
-"latenza causata dalla debolezza del protocollo HTTP. NOTA: alcuni siti "
-"potrebbero non funzionare con PMM abilitato."
-
-msgid "Port on which Polipo will listen"
-msgstr "Porta sulla quale Polipo deve rimanere in ascolto"
-
-msgid "Proxy"
-msgstr "Proxy"
-
-msgid "Query DNS by hostname"
-msgstr "Richiesta DNS da parte dell'host"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr "Abilita"
diff --git a/po/it/qos.po b/po/it/qos.po
deleted file mode 100644
index f8bc57c..0000000
--- a/po/it/qos.po
+++ /dev/null
@@ -1,105 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2013-02-03 13:45+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "Calcola l'overhead"
-
-msgid "Classification Rules"
-msgstr "Regole di classificazione"
-
-msgid "Classification group"
-msgstr "Gruppo di Priorità"
-
-msgid "Destination host"
-msgstr "Host di destinazione"
-
-msgid "Downlink"
-msgstr "Collegamento discendente"
-
-msgid "Download speed (kbit/s)"
-msgstr "Velocità di download (kbit/s)"
-
-msgid "Enable"
-msgstr "Abilita"
-
-msgid "Half-duplex"
-msgstr "Half-duplex"
-
-msgid "Interfaces"
-msgstr "Interfacce"
-
-msgid "Internet Connection"
-msgstr "Connessione Internet"
-
-msgid "Number of bytes"
-msgstr "Numeri di bytes"
-
-msgid "Ports"
-msgstr "Porte"
-
-msgid "Protocol"
-msgstr "Protocollo"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "Qualità del Servizio"
-
-msgid "Service"
-msgstr "Servizi"
-
-msgid "Source host"
-msgstr "Host sorgente"
-
-msgid "Target"
-msgstr "Target"
-
-msgid "Uplink"
-msgstr "Collegamento ascendente"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Velocità di upload (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Con <abbr title=\"Qualità del Servizio\">QoS</abbr> puoi dare priorità al "
-"traffico di rete in base ad un ip, una porta o dei servizi."
-
-msgid "all"
-msgstr "all"
-
-msgid "allf"
-msgstr "allf"
-
-msgid "default"
-msgstr "default"
-
-msgid "express"
-msgstr "express"
-
-msgid "low"
-msgstr "low"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "priority"
-
-msgid "qos_connbytes"
-msgstr "qos_connbytes"
diff --git a/po/it/radvd.po b/po/it/radvd.po
deleted file mode 100644
index cda09b7..0000000
--- a/po/it/radvd.po
+++ /dev/null
@@ -1,374 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-10 19:21+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: German\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "6to4 interface"
-msgstr "Interfaccia 6to4"
-
-msgid "Address"
-msgstr "Indirizzo"
-
-msgid "Addresses"
-msgstr "Indirizzi"
-
-msgid "Advanced"
-msgstr "Avanzato"
-
-msgid "Advertise Home Agent flag"
-msgstr "Advertise Home Agent flag"
-
-msgid "Advertise router address"
-msgstr "Annuncia indirizzo router"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Annuncia Suffissi Dominio"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"Annuncia RDNSS IPv6. Se vuoto, l'indirizzo IPv6 attuale dell'interfaccia "
-"verrà usato"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Prefissi IPv6 Annunciati"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Prefissi IPv6 Annunciati. Se vuoto, il prefisso dell'interfaccia attuale "
-"verrà usato"
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "Annuncia la capacità dell'Agente Home IPv6 Mobile (RFC3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr "Abilita"
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/it/rrdtool.po b/po/it/rrdtool.po
deleted file mode 100644
index 8ae4472..0000000
--- a/po/it/rrdtool.po
+++ /dev/null
@@ -1,359 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-02-03 14:50+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "stat_dg_title_wireless__signal_noise"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "stat_dg_label_wireless__signal_noise"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "stat_ds_signal_noise"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "stat_ds_signal_power"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "stat_dg_title_wireless__signal_quality"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "stat_dg_label_wireless__signal_quality"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "stat_ds_signal_quality"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "stat_dg_title_ping"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "stat_dg_label_ping"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "stat_ds_ping"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "stat_dg_title_iptables__ipt_packets"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "stat_dg_label_iptables__ipt_packets"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "stat_ds_ipt_packets"
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "stat_dg_title_netlink__if_octets"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "stat_dg_label_netlink__if_octets"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "stat_ds_if_octets"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "stat_dg_title_netlink__if_packets"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "stat_dg_label_netlink__if_packets"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "stat_ds_if_packets"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "stat_ds_if_dropped"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "stat_ds_if_errors"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "stat_dg_title_netlink__if_multicast"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "stat_dg_label_netlink__if_multicast"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "stat_ds_if_multicast"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "stat_dg_title_netlink__if_collisions"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "stat_dg_label_netlink__if_collisions"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "stat_ds_if_collisions"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "stat_dg_title_netlink__if_tx_errors"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "stat_dg_label_netlink__if_tx_errors"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "stat_ds_if_tx_errors"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "stat_ds_if_rx_errors"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "stat_dg_title_processes"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "stat_dg_label_processes"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "stat_ds_ps_state"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "stat_dg_title_processes__ps_cputime"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "stat_dg_label_processes__ps_cputime"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "stat_ds_ps_cputime__syst"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "stat_ds_ps_cputime__user"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "stat_dg_title_processes__ps_count"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "stat_dg_label_processes__ps_count"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "stat_ds_ps_count"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "stat_dg_title_processes__ps_pagefaults"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "stat_dg_label_processes__ps_pagefaults"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "stat_ds_ps_pagefaults"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "stat_dg_title_processes__ps_rss"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "stat_dg_label_processes__ps_rss"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "stat_ds_ps_rss"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "stat_dg_title_cpu"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "stat_dg_label_cpu"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "stat_ds_cpu"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "stat_dg_title_interface__if_octets"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "stat_dg_label_interface__if_octets"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "stat_dg_title_interface__if_packets"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "stat_dg_label_interface__if_packets"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "stat_dg_title_tcpconns"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "stat_dg_label_tcpconns"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "stat_ds_tcp_connections"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "stat_dg_title_df"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "stat_dg_label_df"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "stat_ds_df__free"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "stat_ds_df__used"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "stat_dg_title_irq"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "stat_dg_label_irq"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "stat_ds_irq"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "stat_dg_title_load"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "stat_dg_label_load"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "stat_ds_load__shortterm"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "stat_ds_load__midterm"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "stat_ds_load__longterm"
diff --git a/po/it/samba.po b/po/it/samba.po
deleted file mode 100644
index 4645782..0000000
--- a/po/it/samba.po
+++ /dev/null
@@ -1,85 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-19 22:28+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Permetti ospiti"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Autorizza gli utenti del sistema a raggiungere la loro cartella home "
-"attraverso le condivisioni di rete"
-
-msgid "Allowed users"
-msgstr "Utenti ammessi"
-
-msgid "Create mask"
-msgstr "Mask di creazione dei file"
-
-msgid "Description"
-msgstr "Descrizione"
-
-msgid "Directory mask"
-msgstr "Maschera della cartella"
-
-msgid "Edit Template"
-msgstr "Modifica Template"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-"Modifica il template utilizzato per generare la configurazione di samba."
-
-msgid "General Settings"
-msgstr "Opzioni Generali"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Mask for new directories"
-msgstr "Maschera per le nuove cartelle"
-
-msgid "Mask for new files"
-msgstr "Maschera per i nuovi files"
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Network Shares"
-msgstr "Condivisioni di rete"
-
-msgid "Path"
-msgstr "Percorso"
-
-msgid "Read-only"
-msgstr "Solo lettura"
-
-msgid "Share home-directories"
-msgstr "Condividi cartelle home"
-
-msgid "Shared Directories"
-msgstr "Cartelle Condivise"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Questo è il contenuto del file '/etc/samba/smb.conf.template' dal quale sarà "
-"generata la tua configurazione di samba. I valori racchiusi tra il simbolo "
-"('|') non dovrebbero essere toccati. Essi vengono generati dalla schermata "
-"'Opzioni Generali'."
-
-msgid "Workgroup"
-msgstr "Gruppo di lavoro"
diff --git a/po/it/splash.po b/po/it/splash.po
deleted file mode 100644
index e3b0e13..0000000
--- a/po/it/splash.po
+++ /dev/null
@@ -1,361 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-02-10 18:43+0200\n"
-"PO-Revision-Date: 2013-02-10 19:08+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Accept"
-msgstr "Accetta"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-"L'accesso a Internet potrebbe essere possibile, perché alcuni attivisti di "
-"questo progetto condividono le loro connessioni internet private​​. Queste "
-"poche connessioni sono condivise tra tutti gli utenti. Ciò significa che la "
-"larghezza di banda a disposizione è limitato e per questo vi chiediamo di "
-"non fare una delle seguenti operazioni:"
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "Attiva Clienti"
-
-msgid "Allowed hosts/subnets"
-msgstr "Hosts/Sottoreti Consentite"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"Il limite della larghezza di banda per i clienti viene attivato solo quando "
-"entrambi i limiti di upload e download sono impostati. Utilizzare un valore "
-"pari a 0 qui per disattivare completamente questa limitazione. I client "
-"inseriti nell'elenco dei consentiti non sono limitati."
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-"Diventare un membro attivo di questa comunità e aiutaci nell'utilizzo del "
-"proprio nodo"
-
-msgid "Blacklist"
-msgstr "Lista Nera"
-
-msgid "Blocked"
-msgstr "Bloccato"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr "Spazio tempo"
-
-msgid "Client-Splash"
-msgstr "Client-Splash"
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-"Client-Splash è un sistema di autenticazione hotspot per le reti mesh "
-"wireless."
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr "La velocità di download dei clienti è limitata a tale valore (kbyte/s)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-"I clienti che hanno accettato lo splash sono autorizzati ad utilizzare la "
-"rete anche per molte ore."
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr "La velocità di upload dei clienti è limitata a questo valore (kbyte/s)"
-
-msgid "Contact"
-msgstr "Contatto"
-
-msgid "Decline"
-msgstr "Rifiuta"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-"Effettua una donazione per aiutare a mantenere in attività questo progetto."
-
-msgid "Download limit"
-msgstr "Limite di download"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr "Zona Firewall"
-
-msgid "General"
-msgstr "Generale"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nome Host"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-"Le reti e gli host che sono elencate qui sono esclusi dallo splashing, cio* "
-"sono sempre ammessi."
-
-msgid "IP Address"
-msgstr "Indirizzo IP"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-"Se si utilizza una propria apparecchiatura wifi utilizzare canali differenti "
-"dalle nostre."
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-"Se si utilizza questa rete su base regolare vi chiediamo il vostro sostegno:"
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr "Intercettare il traffico cliente su questa interfaccia"
-
-msgid "Interfaces"
-msgstr "Interfacce"
-
-msgid "Interfaces that are used for Splash."
-msgstr "Interfacce usate per lo Splash."
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-"KB/s (Download/Upload). Si può essere in grado di rimuovere questo limite, "
-"contribuendo attivamente a questo progetto."
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "Indirizzo MAC"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "gli indirizzi MAC in questo elenco sono bloccati."
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-"Gli indirizzi MAC dei clienti dell'elenco consentito. Questi non hanno "
-"bisogno di accettare lo splash e non hanno la larghezza di banda limitata."
-
-msgid "Netmask"
-msgstr "Maschera Rete"
-
-msgid "Network"
-msgstr "Rete"
-
-msgid "No clients connected"
-msgstr "Nessun cliente connesso"
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-"Si prega di notare che non siamo un provider di servizi internet, ma una "
-"rete di comunità sperimentale."
-
-msgid "Policy"
-msgstr "Politica"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Salva"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr "Le regole Splash sono integrate in questa zona firewall"
-
-msgid "Splashtext"
-msgstr "Splashtext"
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "Tempo restante"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-"Per richiedere il motivo per cui sono state bloccate o chiedere l'accesso di "
-"nuovo si può provare a contattare il proprietario di questo punto di accesso:"
-
-msgid "Traffic in/out"
-msgstr "Traffico ingresso/uscita"
-
-msgid "Upload limit"
-msgstr "Limite di upload"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr "Benvenuti"
-
-msgid "Whitelist"
-msgstr "Elenco Consentiti"
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr "Ora si è connessi alla rete mesh wireless gratuita"
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-"È possibile inserire il proprio testo che viene visualizzato ai clienti qui "
-"<br/> È possibile utilizzare i seguenti marcatori.: ###COMMUNITY###, "
-"###COMMUNITY_URL###, ###CONTACTURL###, ###LEASETIME###, ###LIMIT### and "
-"###ACCEPT###."
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-"L'accesso a questa rete è stata bloccata, molto probabilmente perché hai "
-"fatto qualcosa che le nostre regole vietano espressamente."
-
-msgid "Your bandwidth is limited to"
-msgstr "La tua larghezza di banda è limitata a"
-
-msgid "blacklisted"
-msgstr "Lista Nera"
-
-msgid "expired"
-msgstr "scaduto"
-
-msgid "optional when using host addresses"
-msgstr "opzionale quando si utilizza indirizzi host"
-
-msgid "perform any kind of illegal activities"
-msgstr "eseguire qualsiasi tipo di attività illegali"
-
-msgid "splashed"
-msgstr "splashed"
-
-msgid "temporarily blocked"
-msgstr "temporaneamente bloccato"
-
-msgid "unknown"
-msgstr "sconosciuto"
-
-msgid "use filesharing applications on this network"
-msgstr "utilizzare le applicazioni di filesharing su questa rete"
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr "sprecate banda con download o flussi inutili"
-
-msgid "whitelisted"
-msgstr "Elenco contensiti"
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "Accettando queste regole è possibile utilizzare questa rete per"
-
-#~ msgid "Edit Splash text"
-#~ msgstr "Modifica il testo Splash"
-
-#~ msgid "hour(s). After this time you need to accept these rules again."
-#~ msgstr ""
-#~ "ora(e). Trascorso questo tempo è necessario accettare queste regole di "
-#~ "nuovo."
-
-#~ msgid "the owner of this access point."
-#~ msgstr "il proprietario di questo punto di accesso."
diff --git a/po/it/statistics.po b/po/it/statistics.po
deleted file mode 100644
index 2097337..0000000
--- a/po/it/statistics.po
+++ /dev/null
@@ -1,608 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-02-10 19:41+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Action (target)"
-msgstr "Azione (destinazione)"
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd è un piccolo demone usato per raccogliere dati da varie fonti "
-"grazie a diversi plugin. Su questa pagina puoi cambiare le opzioni generali "
-"del demone collectd."
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr "Abilita questo plugin"
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr "Gruppo"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Qui puoi definire un comando che sarà avviato da collectd per leggere dei "
-"valori. Il valore sarà letto dallo stdout."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Qui puoi definire un comando che sarà avviato da collectd quando un certo "
-"valore soglia sia raggiunto. Il valore in questione sarà passato al comando "
-"incovato come stdin."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interfaccie"
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-"Lasciare deselezionato per determinare automaticamente l'interfaccia da "
-"monitorare."
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr "Tabella"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/it/tinyproxy.po b/po/it/tinyproxy.po
deleted file mode 100644
index 34528c1..0000000
--- a/po/it/tinyproxy.po
+++ /dev/null
@@ -1,265 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-12-15 19:29+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"Aggiungi una intestazione http \"X-Tinyproxy\" contenente l'IP del client a "
-"cui forwardare la richiesta"
-
-msgid "Allowed clients"
-msgstr "Client permessi"
-
-msgid "Allowed connect ports"
-msgstr "Porte di connessione permesse"
-
-msgid "Bind address"
-msgstr "Bind Address"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-"Di default, il filto è basato sul nome di dominio. Abilita questa opzione "
-"per effettuare il match con URL"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr "Configurazione"
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr "Abilita il server Tinyproxy"
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr "Impossibile recuperare le statistiche dall'url:"
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-"Lista di indirizzi IP o range di indirizzi a cui è permesso l'uso del proxy"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr "Numero massimo di client simultanei permessi"
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/it/transmission.po b/po/it/transmission.po
deleted file mode 100644
index 1008fad..0000000
--- a/po/it/transmission.po
+++ /dev/null
@@ -1,295 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-02-09 21:28+0200\n"
-"PO-Revision-Date: 2013-02-09 21:30+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Alternative download speed"
-msgstr "Velocità di download alternativo"
-
-msgid "Alternative speed enabled"
-msgstr "Velocità alternativa attivata"
-
-msgid "Alternative speed time begin"
-msgstr "Tempo di velocità alternativa inizio"
-
-msgid "Alternative speed time day"
-msgstr "Tempo di velocità alternativa giorno"
-
-msgid "Alternative speed time end"
-msgstr "Tempo di velocità alternativa fine"
-
-msgid "Alternative speed timing enabled"
-msgstr "Periodo di velocità alternativa attiva"
-
-msgid "Alternative upload speed"
-msgstr "Velocità alternativa di upload"
-
-msgid "Automatically start added torrents"
-msgstr "Avvia automaticamente i torrent aggiunti"
-
-msgid "Bandwidth settings"
-msgstr "Impostazioni larghezza della banda"
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/it/upnp.po b/po/it/upnp.po
deleted file mode 100644
index 053e060..0000000
--- a/po/it/upnp.po
+++ /dev/null
@@ -1,155 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-02-03 13:52+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"Le ACL specificano quali porte esterne possono essere redirezionate agli "
-"indirizzi interni e porte."
-
-msgid "Action"
-msgstr "Azione"
-
-msgid "Active UPnP Redirects"
-msgstr "Attiva reindirizzamento UPnP"
-
-msgid "Advanced Settings"
-msgstr "Opzioni Avanzate"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "Permetti l'aggiunta della mappatura solo agli indirizzi IP richiedenti"
-
-msgid "Announced model number"
-msgstr "Numero di modello annunciato"
-
-msgid "Announced serial number"
-msgstr "Numero seriale annunciato"
-
-msgid "Clean rules interval"
-msgstr "Cancella le regole"
-
-msgid "Clean rules threshold"
-msgstr "Pulisci le regole degli eventi"
-
-msgid "Client Address"
-msgstr "Indirizzo IP"
-
-msgid "Client Port"
-msgstr "Porta"
-
-msgid "Collecting data..."
-msgstr "Raccolgo i dati..."
-
-msgid "Comment"
-msgstr "Descrizione"
-
-msgid "Delete Redirect"
-msgstr "Cancella Mappatura"
-
-msgid "Device UUID"
-msgstr "UUID del dispositivo"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Abilita il protocollo NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Abilita il protocollo UPnP"
-
-msgid "Enable additional logging"
-msgstr "Abilita log addizionale"
-
-msgid "Enable secure mode"
-msgstr "Abilita la modalità sicura"
-
-msgid "External Port"
-msgstr "Porta Esterna"
-
-msgid "External ports"
-msgstr "Porte Esterne"
-
-msgid "General Settings"
-msgstr "Opzioni Generali"
-
-msgid "Internal addresses"
-msgstr "Indirizzi Interni"
-
-msgid "Internal ports"
-msgstr "Porte Interne"
-
-msgid "MiniUPnP ACLs"
-msgstr "MiniUPnP ACLs"
-
-msgid "MiniUPnP settings"
-msgstr "Opzioni di MiniUPnP"
-
-msgid "Notify interval"
-msgstr "Intervello di notifica"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Presentation URL"
-msgstr "URL di presentazione"
-
-msgid "Protocol"
-msgstr "Protocollo"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Scrivi nel log di sistema le informazioni di extra debugging"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Mostra l'uptime del sistema invece del demone"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Avvia il servizo UPnP e NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Non ci sono mappature attive."
-
-msgid "UPNP"
-msgstr "UPNP"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permette ai dispositivi nella rete locale di configurare "
-"automaticamente il router."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permette ai dispositivi nella rete locale di configurare "
-"automaticamente il router."
-
-msgid "UPnP lease file"
-msgstr "UPnP lease file"
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Valori in KByte/s, (informativo)"
-
-msgid "enable"
-msgstr "abilita"
diff --git a/po/it/ushare.po b/po/it/ushare.po
deleted file mode 100644
index 5837a11..0000000
--- a/po/it/ushare.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2013-02-03 14:03+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "Percorso dei contenuti"
-
-msgid "Disable telnet console"
-msgstr "Disabilita console telnet"
-
-msgid "Disable webinterface"
-msgstr "Disabilita l'interfaccia web"
-
-msgid "Enable"
-msgstr "Attiva"
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid "Options"
-msgstr "Opzioni"
-
-msgid "Servername"
-msgstr "Nome del server"
-
-msgid "Settings"
-msgstr "Impostazioni"
-
-msgid "Username"
-msgstr "Nome Utente"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"uShare è un Server Multimediale UPnP (TM) A / V e DLNA. Implementa il "
-"componente server che fornisce ai dispositivi multimediali UPnP, le "
-"informazioni su file multimediali disponibili."
diff --git a/po/it/uvc_streamer.po b/po/it/uvc_streamer.po
deleted file mode 100644
index 11cb6c2..0000000
--- a/po/it/uvc_streamer.po
+++ /dev/null
@@ -1,43 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-19 23:17+0200\n"
-"Last-Translator: claudyus <claudyus84@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Frame per secondo"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Risoluzione"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Impostazioni"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Streaming della webcam"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Configura la tua webcam compatibile Linux-UVC. Prova con il browser <a href="
-"\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/it/vnstat.po b/po/it/vnstat.po
deleted file mode 100644
index 8cc6e5b..0000000
--- a/po/it/vnstat.po
+++ /dev/null
@@ -1,68 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-05-17 22:00+0200\n"
-"Last-Translator: coatto87 <coatto87@gmail.com>\n"
-"Language-Team: German\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configuration"
-msgstr "Configurazione"
-
-msgid "Daily traffic"
-msgstr "Traffico giornaliero"
-
-msgid "Graphs"
-msgstr "Grafici"
-
-msgid "Hourly traffic"
-msgstr "Traffico orario"
-
-msgid "Monitor selected interfaces"
-msgstr "Monitora le interfacce selezionate"
-
-msgid "Monthly traffic"
-msgstr "Traffico mensile"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Non è ancora stato configurato un database. Vai nella configurazione di "
-"VnStat e abilita il monitoraggio per una o più interfacce."
-
-msgid "Restart VnStat"
-msgstr "Riavvia VnStat"
-
-msgid "Summary display"
-msgstr "Riassunto"
-
-msgid "Top 10 display"
-msgstr "Top 10 display"
-
-msgid "Update »"
-msgstr "Aggiorna"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Grafici VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Monitor del traffico VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat è un monitor del traffico di rete per Linux che scrive un log per le "
-"interfacce selezionate."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "Il servizio VnStat è stato riavviato."
diff --git a/po/it/voice_core.po b/po/it/voice_core.po
deleted file mode 100644
index 4d22ff0..0000000
--- a/po/it/voice_core.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-03 14:00+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Telefoni"
-
-msgid "Voice"
-msgstr "Voce"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/it/voice_diag.po b/po/it/voice_diag.po
deleted file mode 100644
index 620aedf..0000000
--- a/po/it/voice_diag.po
+++ /dev/null
@@ -1,30 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-03 14:13+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Diagnostics"
-msgstr "Diagnostiche"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Le funzioni di diagnostica disponibili sul dispositivo dipendono i moduli "
-"che sono stati installati."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"In questo menu ci sono delle opzioni che consentono di configurare ed "
-"eseguire test sulle operazioni vocali del sistema. Questi sono noti come "
-"diagnostica."
diff --git a/po/it/watchcat.po b/po/it/watchcat.po
deleted file mode 100644
index 1c74d63..0000000
--- a/po/it/watchcat.po
+++ /dev/null
@@ -1,70 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-02-03 14:12+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Forced reboot delay"
-msgstr "Ritardo riavvio forzato"
-
-msgid "Host address to ping"
-msgstr "Indirizzo dell'host da pingare"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"Ogni quanto si vuole controllare la connessione. Di default espresso in "
-"secondi, puoi usare il sufisso 'm' per i minuti, 'h' per le ore o 'd' per i "
-"giorni"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"In modalità periodica, definisce il periodo di riavvio. In modalità "
-"internet, definisce il più lungo periodo del tempo senza connessione "
-"internet prima di un riavvio è  pianificato. L'unità predefinita è in "
-"secondi, si può usare il suffisso 'm' per i minuti, 'h' per le ore o 'd' per "
-"i giorni."
-
-msgid "Operating mode"
-msgstr "Modalità"
-
-msgid "Period"
-msgstr "Periodo"
-
-msgid "Ping host"
-msgstr "Ping host"
-
-msgid "Ping period"
-msgstr "Periodo del Ping"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Watchcat ti permette di configurare un riavvio periodico quando la "
-"connessione a internet è stata persa per un certo periodo."
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"Quando watchcat vuole riavviare il sistema usa un soft reboot, immetendo un "
-"valore diverso da 0 in questo campo il proverà un hard reboot se il soft "
-"reboot fallisce. Inserire un numero espresso in secondi per abilitare, usa 0 "
-"per disabilitare"
diff --git a/po/it/wol.po b/po/it/wol.po
deleted file mode 100644
index 9c4697c..0000000
--- a/po/it/wol.po
+++ /dev/null
@@ -1,55 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2013-02-03 14:01+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: none\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Broadcast su tutte le interfaccie"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Scegli l'host da \"svegliare\" o inserisci il MAC address da usare"
-
-msgid "Host to wake up"
-msgstr "Host da \"svegliare\""
-
-msgid "Network interface to use"
-msgstr "Interfacci di rete da usare"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Avvolte solo uno dei due tools funziona. Se uno fallisce, tenta di usare il "
-"secondo"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Secifica l'interfaccia su cui il pacchetto \"magico\" WoL è inviato"
-
-msgid "Starting WoL utility:"
-msgstr "Avvia l'utility WoL:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LAN è un meccanismo che ti permette di avviare da remoto un computer "
-"collegato alla LAN."
-
-msgid "Wake up host"
-msgstr "Sveglia Host"
-
-msgid "WoL program"
-msgstr "Programma WoL"
diff --git a/po/it/wshaper.po b/po/it/wshaper.po
deleted file mode 100644
index 719e16a..0000000
--- a/po/it/wshaper.po
+++ /dev/null
@@ -1,58 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-01-28 01:36+0200\n"
-"PO-Revision-Date: 2013-02-03 14:07+0200\n"
-"Last-Translator: Francesco <3gasas@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "Collegamento discendente"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Larghezza di banda in downstream in kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Host o rete in notazione CIDR."
-
-msgid "Interface"
-msgstr "Interfaccia"
-
-msgid "Low priority destination ports"
-msgstr "Porte di destinazione a bassa priorità"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hosts a bassa priorità (Destinazione)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hosts a bassa priorità (Fonte)"
-
-msgid "Low priority source ports"
-msgstr "Porte sorgenti a bassa priorità"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Larghezza di banda in upstream in kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Impostazioni Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"WonderShaper usa la regolazione del traffico per garantire bassa latenza per "
-"il traffico interattivo anche quando la connessione a Internet è molto "
-"satura."
diff --git a/po/ja/ahcp.po b/po/ja/ahcp.po
deleted file mode 100644
index b673619..0000000
--- a/po/ja/ahcp.po
+++ /dev/null
@@ -1,116 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-19 07:54+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "AHCPサーバー"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCPはIPv6及びIPv6/IPv4デュアルスタックを使用するネットワークにおいて、ルー"
-"ターディスカバリの代わりとして使用するためにデザインされた自動設定プロトコル"
-"です。また、AHCPはモバイル・アドホックネットワークのような、リンク層のドメイ"
-"ンブロードキャスト毎に設定を行うことが困難なネットワークでのDHCP機能としても"
-"使用することができます。"
-
-msgid "Active AHCP Leases"
-msgstr "有効なAHCPリース"
-
-msgid "Address"
-msgstr "アドレス"
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Age"
-msgstr "Age"
-
-msgid "Announced DNS servers"
-msgstr "通知するDNSサーバー"
-
-msgid "Announced NTP servers"
-msgstr "通知するNTPサーバー"
-
-msgid "Announced prefixes"
-msgstr "通知するプレフィクス"
-
-msgid "Collecting data..."
-msgstr "データ収集中です..."
-
-msgid "Forwarder"
-msgstr "転送"
-
-msgid "General Setup"
-msgstr "一般設定"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4及びIPv6"
-
-msgid "IPv4 only"
-msgstr "IPv4のみ"
-
-msgid "IPv6 only"
-msgstr "IPv6のみ"
-
-msgid "Lease directory"
-msgstr "リースファイル・ディレクトリ"
-
-msgid "Lease validity time"
-msgstr "リース有効時間"
-
-msgid "Log file"
-msgstr "ログファイル"
-
-msgid "Multicast address"
-msgstr "マルチキャストアドレス"
-
-msgid "Operation mode"
-msgstr "動作モード"
-
-msgid "Port"
-msgstr "ポート"
-
-msgid "Protocol family"
-msgstr "プロトコルファミリ"
-
-msgid "Served interfaces"
-msgstr "対象インターフェース"
-
-msgid "Server"
-msgstr "サーバー"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "通知するNTPサーバーのIPv4及びIPv6アドレスを設定します"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "通知するDNSサーバーのIPv4及びIPv6アドレスを設定します"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-"通知するIPv4及びIPv6アドレスのネットワーク・プレフィクスをCIDR形式で設定しま"
-"す"
-
-msgid "The AHCP Service is not running."
-msgstr "AHCP サービスは稼働していません。"
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "AHCP サービスは稼働中です。(ID %s)"
-
-msgid "There are no active leases."
-msgstr "有効なリースはありません。"
-
-msgid "Unique ID file"
-msgstr "ユニークIDファイル"
diff --git a/po/ja/asterisk.po b/po/ja/asterisk.po
deleted file mode 100644
index 98bd10b..0000000
--- a/po/ja/asterisk.po
+++ /dev/null
@@ -1,44 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-01-08 13:20+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Asterisk の全般オプション"
-
-#~ msgid "AGI directory"
-#~ msgstr "AGI ディレクトリ"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "録音されたサウンドを録音中にキャッシュ"
-
-#~ msgid "Debug Level"
-#~ msgstr "デバッグレベル"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "いくつかの警告を無効にする"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "クラッシュ時にコアダンプを出力する"
-
-#~ msgid "High Priority"
-#~ msgstr "高優先度"
-
-#~ msgid "Log directory"
-#~ msgstr "ログ ディレクトリ"
-
-#~ msgid "Allow transfer"
-#~ msgstr "転送を許可"
-
-#~ msgid "Clear global vars"
-#~ msgstr "グローバル変数を消去"
diff --git a/po/ja/base.po b/po/ja/base.po
deleted file mode 100644
index 08c2d17..0000000
--- a/po/ja/base.po
+++ /dev/null
@@ -1,3876 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-11-17 16:43+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d 分幅, %d 秒間隔)"
-
-msgid "(%s available)"
-msgstr "(%s 使用可能)"
-
-msgid "(empty)"
-msgstr "(空)"
-
-msgid "(no interfaces attached)"
-msgstr "(インターフェースが接続されていません)"
-
-msgid "-- Additional Field --"
-msgstr "-- 追加項目 --"
-
-msgid "-- Please choose --"
-msgstr "-- 選択してください --"
-
-msgid "-- custom --"
-msgstr "-- 手動設定 --"
-
-msgid "1 Minute Load:"
-msgstr "過去1分の負荷:"
-
-msgid "15 Minute Load:"
-msgstr "過去15分の負荷:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz 上側第2チャネル"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz 下側第2チャネル"
-
-msgid "5 Minute Load:"
-msgstr "過去5分の負荷:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> クエリポート"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> サーバーポート"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"リゾルバファイルの順番に、<abbr title=\"Domain Name System\">DNS</abbr>サー"
-"バーに問い合わせを行います"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-アドレス"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-ゲートウェイ"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-ネットマスク"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-アドレス又はネット"
-"ワーク (CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-ゲートウェイ"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 設定"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> 名"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-アドレス"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"maximal\">最大</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> リース"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"maximal\">最大</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> パケットサイズ"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">最大</abbr> 並列処理クエリ"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "ARサポート"
-
-msgid "ARP retry threshold"
-msgstr "ARP再試行しきい値"
-
-msgid "ATM Bridges"
-msgstr "ATMブリッジ"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "ATM仮想チャネル識別子 (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "ATM仮想パス識別子 (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr "ATMデバイス番号"
-
-msgid "Accept router advertisements"
-msgstr "ルーター広告の受信を許可する"
-
-msgid "Access Concentrator"
-msgstr "Access Concentrator"
-
-msgid "Access Point"
-msgstr "アクセスポイント"
-
-msgid "Action"
-msgstr "動作"
-
-msgid "Actions"
-msgstr "動作"
-
-msgid "Activate this network"
-msgstr "このネットワークを有効にする"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"稼働中の <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-経路情報"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"稼働中の <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-経路情報"
-
-msgid "Active Connections"
-msgstr "アクティブコネクション"
-
-msgid "Active DHCP Leases"
-msgstr "現在アクティブなDHCPリース"
-
-msgid "Active DHCPv6 Leases"
-msgstr "現在アクティブなDHCPv6リース"
-
-msgid "Ad-Hoc"
-msgstr "アドホック"
-
-msgid "Add"
-msgstr "追加"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr "インターフェースの新規作成..."
-
-msgid "Additional Hosts files"
-msgstr "追加のホストファイル"
-
-msgid "Address"
-msgstr "アドレス"
-
-msgid "Address to access local relay bridge"
-msgstr "ローカル・リレーブリッジにアクセスするためのIPアドレス"
-
-msgid "Administration"
-msgstr "管理画面"
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Advertise IPv6 on network"
-msgstr "ネットワーク上のにIPv6 アドレスを広告する"
-
-msgid "Advertised network ID"
-msgstr "ネットワークIDを広告する"
-
-msgid "Alert"
-msgstr "警告"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "<abbr title=\"Secure Shell\">SSH</abbr> パスワード認証を許可します"
-
-msgid "Allow all except listed"
-msgstr "リスト内の端末からのアクセスを禁止"
-
-msgid "Allow listed only"
-msgstr "リスト内の端末からのアクセスを許可"
-
-msgid "Allow localhost"
-msgstr "ローカルホストを許可する"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"リモートホストがSSH転送されたローカルのポートに接続することを許可します"
-
-msgid "Allow root logins with password"
-msgstr "パスワードを使用したroot権限でのログインを許可する"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "パスワードを使用した<em>root</em>権限でのログインを許可する"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr "設定可能な範囲は1から65535です"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "チェックボックスがオフの場合、追加のネットワークが作成されます。"
-
-msgid "Antenna 1"
-msgstr "アンテナ 1"
-
-msgid "Antenna 2"
-msgstr "アンテナ 2"
-
-msgid "Antenna Configuration"
-msgstr "アンテナ設定"
-
-msgid "Any zone"
-msgstr "全てのゾーン"
-
-msgid "Apply"
-msgstr "適用"
-
-msgid "Applying changes"
-msgstr "変更を適用"
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr "認証済み端末"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s 無線LANコントローラ"
-
-msgid "Authentication"
-msgstr "認証"
-
-msgid "Authoritative"
-msgstr "Authoritative"
-
-msgid "Authorization Required"
-msgstr "ログイン認証"
-
-msgid "Auto Refresh"
-msgstr "自動更新"
-
-msgid "Available"
-msgstr "使用可"
-
-msgid "Available packages"
-msgstr "インストール可能なパッケージ"
-
-msgid "Average:"
-msgstr "平均値:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "戻る"
-
-msgid "Back to Overview"
-msgstr "概要へ戻る"
-
-msgid "Back to configuration"
-msgstr "設定へ戻る"
-
-msgid "Back to overview"
-msgstr "概要へ戻る"
-
-msgid "Back to scan results"
-msgstr "スキャン結果へ戻る"
-
-msgid "Background Scan"
-msgstr "バックグラウンドスキャン"
-
-msgid "Backup / Flash Firmware"
-msgstr "バックアップ / ファームウェア更新"
-
-msgid "Backup / Restore"
-msgstr "バックアップ / 復元"
-
-msgid "Backup file list"
-msgstr "バックアップ・ファイルリスト"
-
-msgid "Bad address specified!"
-msgstr "無効なアドレスです!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"以下はバックアップの際に含まれるファイルリストです。このリストは、opkgによっ"
-"て認識されている設定ファイル、重要なベースファイル、ユーザーが設定した正規表"
-"現に一致したファイルの一覧です。"
-
-msgid "Bitrate"
-msgstr "ビットレート"
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr "ブリッジ"
-
-msgid "Bridge interfaces"
-msgstr "ブリッジインターフェース"
-
-msgid "Bridge unit number"
-msgstr "ブリッジユニット番号"
-
-msgid "Bring up on boot"
-msgstr "デフォルトで起動する"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Broadcom 802.11%s 無線LANコントローラ"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Broadcom BCM%04x 802.11 無線LANコントローラ"
-
-msgid "Buffered"
-msgstr "バッファ"
-
-msgid "Buttons"
-msgstr "ボタン"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "CPU使用率 (%)"
-
-msgid "Cached"
-msgstr "キャッシュ"
-
-msgid "Cancel"
-msgstr "キャンセル"
-
-msgid "Chain"
-msgstr "チェイン"
-
-msgid "Changes"
-msgstr "変更"
-
-msgid "Changes applied."
-msgstr "変更が適用されました。"
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "デバイスの管理者パスワードを変更します"
-
-msgid "Channel"
-msgstr "チャネル"
-
-msgid "Check"
-msgstr "チェック"
-
-msgid "Checksum"
-msgstr "チェックサム"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"このインターフェースに設定するファイウォール・ゾーンを選択してください。<em>"
-"設定しない</em>を選択すると、設定済みのゾーンを削除します。また、<em>作成</"
-"em>フィールドにゾーン名を入力すると、新しくゾーンを作成し、このインターフェー"
-"スに設定します。"
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"無線インターフェースをアタッチするネットワークを選択してください。または、"
-"<em>作成</em>欄を選択すると新しいネットワークを作成します。"
-
-msgid "Cipher"
-msgstr "暗号化方式"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"\"バックアップアーカイブの作成\"をクリックすると、現在の設定ファイルをtar形式"
-"のアーカイブファイルとしてダウンロードします。設定のリセットを行う場合、\"設"
-"定リセット\"をクリックしてください。(ただし、squashfsをお使いの場合のみ使用可"
-"能です)"
-
-msgid "Client"
-msgstr "クライアント"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "DHCPリクエスト時に送信するクライアントID"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"設定した秒数後に、使用していない接続を閉じます。0を設定した場合、接続を維持し"
-"ます"
-
-msgid "Close list..."
-msgstr "リストを閉じる"
-
-msgid "Collecting data..."
-msgstr "データ収集中です..."
-
-msgid "Command"
-msgstr "コマンド"
-
-msgid "Common Configuration"
-msgstr "一般設定"
-
-msgid "Compression"
-msgstr "圧縮"
-
-msgid "Configuration"
-msgstr "設定"
-
-msgid "Configuration applied."
-msgstr "設定を適用しました。"
-
-msgid "Configuration files will be kept."
-msgstr "設定ファイルは保持されます。"
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "このマウント設定をblock-extrootのオーバーレイ記憶領域として設定する"
-
-msgid "Confirmation"
-msgstr "確認"
-
-msgid "Connect"
-msgstr "接続"
-
-msgid "Connected"
-msgstr "接続中"
-
-msgid "Connection Limit"
-msgstr "接続制限"
-
-msgid "Connections"
-msgstr "ネットワーク接続"
-
-msgid "Country"
-msgstr "国"
-
-msgid "Country Code"
-msgstr "国コード"
-
-msgid "Cover the following interface"
-msgstr "インターフェースの指定"
-
-msgid "Cover the following interfaces"
-msgstr "インターフェースの指定"
-
-msgid "Create / Assign firewall-zone"
-msgstr "ファイアウォールゾーンの作成 / 割り当て"
-
-msgid "Create Interface"
-msgstr "インターフェースの作成"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "複数のインタフェースを指定してブリッジを作成します"
-
-msgid "Critical"
-msgstr "重大"
-
-msgid "Cron Log Level"
-msgstr "Cronのログ出力レベル"
-
-msgid "Custom Interface"
-msgstr "新しいインターフェース"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"<abbr title=\"Light Emitting Diode\">LED</abbr> デバイスの挙動をカスタマイズ"
-"します。"
-
-msgid "DHCP Leases"
-msgstr "DHCPリース"
-
-msgid "DHCP Server"
-msgstr "DHCPサーバー"
-
-msgid "DHCP and DNS"
-msgstr "DHCP 及び DNS"
-
-msgid "DHCP client"
-msgstr "DHCP クライアント"
-
-msgid "DHCP-Options"
-msgstr "DHCPオプション"
-
-msgid "DHCPv6 Leases"
-msgstr "DHCPv6 リース"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "DNSフォワーディング"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "デバッグ"
-
-msgid "Default %d"
-msgstr "標準設定 %d"
-
-msgid "Default gateway"
-msgstr "デフォルトゲートウェイ"
-
-msgid "Default state"
-msgstr "標準状態"
-
-msgid "Define a name for this network."
-msgstr "ネットワーク名を設定してください。"
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"追加のDHCPオプションを設定します。（例：\"<code>6,192.168.2.1,192.168.2.2</"
-"code>\" と設定することで、クライアントに指定のDNSサーバーを通知します。）"
-
-msgid "Delete"
-msgstr "削除"
-
-msgid "Delete this interface"
-msgstr "インターフェースを削除します"
-
-msgid "Delete this network"
-msgstr "ネットワークを削除します"
-
-msgid "Description"
-msgstr "詳細"
-
-msgid "Design"
-msgstr "デザイン"
-
-msgid "Destination"
-msgstr "宛先"
-
-msgid "Device"
-msgstr "デバイス"
-
-msgid "Device Configuration"
-msgstr "デバイス設定"
-
-msgid "Diagnostics"
-msgstr "診断機能"
-
-msgid "Directory"
-msgstr "ディレクトリ"
-
-msgid "Disable"
-msgstr "無効"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"このインターフェースでは<abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>機能を使用しません。"
-
-msgid "Disable DNS setup"
-msgstr "DNSセットアップを無効にする"
-
-msgid "Disable HW-Beacon timer"
-msgstr "HWビーコンタイマーを無効にする"
-
-msgid "Disabled"
-msgstr "無効"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "RFC1918の応答を破棄します"
-
-msgid "Displaying only packages containing"
-msgstr "右記の表示を含んだパッケージのみを表示中"
-
-msgid "Distance Optimization"
-msgstr "距離の最適化"
-
-msgid "Distance to farthest network member in meters."
-msgstr "最も遠い端末との距離(メートル)を設定してください。"
-
-msgid "Diversity"
-msgstr "ダイバシティ"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq は <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-"サーバーと <abbr title=\"Network Address Translation\">NAT</abbr>ファイア"
-"ウォールの為の <abbr title=\"Domain Name System\">DNS</abbr>フォワーダーを複"
-"合したサービスです。"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-"無効なリプライをキャッシュしません (例：存在しないドメインからの返答など)"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr "パブリックDNSサーバーが返答できなかったリクエストを転送しません"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "ローカルネットワークへの逆引きを転送しません"
-
-msgid "Do not send probe responses"
-msgstr "プローブレスポンスを送信しない"
-
-msgid "Domain required"
-msgstr "ドメイン必須"
-
-msgid "Domain whitelist"
-msgstr "ドメイン・ホワイトリスト"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"<abbr title=\"Domain Name System\">DNS</abbr>名の無い <abbr title=\"Domain "
-"Name System\">DNS</abbr>リクエストを転送しません"
-
-msgid "Download and install package"
-msgstr "パッケージのダウンロードとインストール"
-
-msgid "Download backup"
-msgstr "バックアップアーカイブのダウンロード"
-
-msgid "Dropbear Instance"
-msgstr "Dropbear設定"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear は <abbr title=\"Secure Shell\">SSH</abbr> ネットワークへのシェルア"
-"クセスと統合された <abbr title=\"Secure Copy\">SCP</abbr> サーバーを提供しま"
-"す。"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"ダイナミック <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "動的トンネル機能"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"クライアントに対して動的にDHCPアドレスを割り振ります。無効に設定した場合、静"
-"的リースのみを行います。"
-
-msgid "EAP-Method"
-msgstr "EAPメソッド"
-
-msgid "Edit"
-msgstr "編集"
-
-msgid "Edit this interface"
-msgstr "インターフェースを編集"
-
-msgid "Edit this network"
-msgstr "ネットワークを編集"
-
-msgid "Emergency"
-msgstr "緊急"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "<abbr title=\"Spanning Tree Protocol\">STP</abbr>を有効にする"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "HE.netの動的endpoint更新を有効にします"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "PPPリンクのIPv6ネゴシエーションを有効にする"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "ジャンボフレーム・パススルーを有効にする"
-
-msgid "Enable NTP client"
-msgstr "NTPクライアント機能を有効にする"
-
-msgid "Enable TFTP server"
-msgstr "TFTPサーバーを有効にする"
-
-msgid "Enable VLAN functionality"
-msgstr "VLAN機能を有効にする"
-
-msgid "Enable learning and aging"
-msgstr "ラーニング・エイジング機能を有効にする"
-
-msgid "Enable this mount"
-msgstr "マウント設定を有効にする"
-
-msgid "Enable this swap"
-msgstr "スワップ設定を有効にする"
-
-msgid "Enable/Disable"
-msgstr "有効/無効"
-
-msgid "Enabled"
-msgstr "有効"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "スパニングツリー・プロトコルを有効にする"
-
-msgid "Encapsulation mode"
-msgstr "カプセル化モード"
-
-msgid "Encryption"
-msgstr "暗号化モード"
-
-msgid "Erasing..."
-msgstr "消去中..."
-
-msgid "Error"
-msgstr "エラー"
-
-msgid "Ethernet Adapter"
-msgstr "イーサネットアダプタ"
-
-msgid "Ethernet Switch"
-msgstr "イーサネットスイッチ"
-
-msgid "Expand hosts"
-msgstr "拡張ホスト設定"
-
-msgid "Expires"
-msgstr "期限切れ"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"リースアドレスの有効時間を入力します。最小設定値は2分です。 (<code>2m</"
-"code>)."
-
-msgid "External system log server"
-msgstr "外部システムログ・サーバー"
-
-msgid "External system log server port"
-msgstr "外部システムログ・サーバーポート"
-
-msgid "Fast Frames"
-msgstr "ファスト・フレーム"
-
-msgid "File"
-msgstr "ファイル"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "クライアントに通知するブートイメージのファイル名"
-
-msgid "Filesystem"
-msgstr "ファイルシステム"
-
-msgid "Filter"
-msgstr "フィルタ"
-
-msgid "Filter private"
-msgstr "プライベートフィルター"
-
-msgid "Filter useless"
-msgstr "Filter useless"
-
-msgid "Find and join network"
-msgstr "ネットワークを検索して参加"
-
-msgid "Find package"
-msgstr "パッケージを検索"
-
-msgid "Finish"
-msgstr "終了"
-
-msgid "Firewall"
-msgstr "ファイアウォール"
-
-msgid "Firewall Settings"
-msgstr "ファイアウォール設定"
-
-msgid "Firewall Status"
-msgstr "ファイアウォール・ステータス"
-
-msgid "Firmware Version"
-msgstr "ファームウェア・バージョン"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "DNSクエリを送信する送信元ポートを固定します"
-
-msgid "Flags"
-msgstr "フラグ"
-
-msgid "Flash Firmware"
-msgstr "ファームウェアの更新"
-
-msgid "Flash image..."
-msgstr "更新"
-
-msgid "Flash new firmware image"
-msgstr "ファームウェアの更新"
-
-msgid "Flash operations"
-msgstr "更新機能"
-
-msgid "Flashing..."
-msgstr "更新中..."
-
-msgid "Force"
-msgstr "強制"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr "CCMP (AES) を使用"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-"別のDHCPサーバーが検出された場合でも、このDHCPサーバーを強制的に使用します。"
-
-msgid "Force TKIP"
-msgstr "TKIP を使用"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "TKIP 及びCCMP (AES) を使用"
-
-msgid "Forward DHCP traffic"
-msgstr "DHCPトラフィックを転送する"
-
-msgid "Forward broadcast traffic"
-msgstr "ブロードキャスト・トラフィックを転送する"
-
-msgid "Forwarding mode"
-msgstr "転送モード"
-
-msgid "Fragmentation Threshold"
-msgstr "フラグメンテーション閾値"
-
-msgid "Frame Bursting"
-msgstr "フレームバースト"
-
-msgid "Free"
-msgstr "空き"
-
-msgid "Free space"
-msgstr "ディスクの空き容量"
-
-msgid "Frequency Hopping"
-msgstr "周波数ホッピング"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "GPRSのみ"
-
-msgid "Gateway"
-msgstr "ゲートウェイ"
-
-msgid "Gateway ports"
-msgstr "ゲートウェイ・ポート"
-
-msgid "General Settings"
-msgstr "一般設定"
-
-msgid "General Setup"
-msgstr "一般設定"
-
-msgid "Generate archive"
-msgstr "バックアップアーカイブの作成"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "802.11%s 無線LANコントローラ"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "入力されたパスワードが一致しません。パスワードは変更されませんでした!"
-
-msgid "Go to password configuration..."
-msgstr "パスワード設定へ移動..."
-
-msgid "Go to relevant configuration page"
-msgstr "関連する設定ページへ移動"
-
-msgid "HE.net password"
-msgstr "HE.net パスワード"
-
-msgid "HE.net user ID"
-msgstr "HE.net ユーザーID"
-
-msgid "HT capabilities"
-msgstr "HT機能"
-
-msgid "HT mode"
-msgstr "HTモード"
-
-msgid "Handler"
-msgstr "ハンドラ"
-
-msgid "Hang Up"
-msgstr "再起動"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"このページではホスト名やタイムゾーンなどの基本的な設定を行うことが出来ます。"
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr "SSH公開鍵認証で使用するSSH公開鍵を1行づつペーストしてください。"
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Hermes 802.11b 無線LANコントローラ"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>の隠匿"
-
-msgid "Host entries"
-msgstr "ホストエントリー"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"ホスト<abbr title=\"Internet Protocol Address\">IP</abbr> または ネットワーク"
-
-msgid "Hostname"
-msgstr "ホスト名"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "DHCPリクエスト時に送信するホスト名"
-
-msgid "Hostnames"
-msgstr "ホスト名"
-
-msgid "IP address"
-msgstr "IPアドレス"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "IPv4 ファイアウォール"
-
-msgid "IPv4 WAN Status"
-msgstr "IPv4 WAN ステータス"
-
-msgid "IPv4 address"
-msgstr "IPv4 アドレス"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4及びIPv6"
-
-msgid "IPv4 broadcast"
-msgstr "IPv4 ブロードキャスト"
-
-msgid "IPv4 gateway"
-msgstr "IPv4 ゲートウェイ"
-
-msgid "IPv4 netmask"
-msgstr "IPv4 ネットマスク"
-
-msgid "IPv4 only"
-msgstr "IPv4のみ"
-
-msgid "IPv4 prefix length"
-msgstr "IPv4 プレフィクス長"
-
-msgid "IPv4-Address"
-msgstr "IPv4-アドレス"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "IPv6 ファイアウォール"
-
-msgid "IPv6 WAN Status"
-msgstr "IPv6 WAN ステータス"
-
-msgid "IPv6 address"
-msgstr "IPv6 アドレス"
-
-msgid "IPv6 gateway"
-msgstr "IPv6 ゲートウェイ"
-
-msgid "IPv6 only"
-msgstr "IPv6のみ"
-
-msgid "IPv6 prefix"
-msgstr "IPv6 プレフィクス"
-
-msgid "IPv6 prefix length"
-msgstr "IPv6 プレフィクス長"
-
-msgid "IPv6-Address"
-msgstr "IPv6-アドレス"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-in-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-over-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-over-IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "識別子"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr "固定のデバイスノード名のかわりに、設定したUUIDを使用してマウントします"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"固定のデバイスノード名のかわりに、設定したパーティションラベルを使用してマウ"
-"ントします。"
-
-msgid "If unchecked, no default route is configured"
-msgstr "チェックされていない場合、デフォルトルートを設定しません"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr "チェックされていない場合、通知されたDNSサーバーアドレスを無視します"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"物理メモリが不足する場合、一時的にデータをより大容量な<abbr title=\"Random "
-"Access Memory\">RAM</abbr>デバイスにスワップすることが出来ます。ただし、デー"
-"タのスワップは非常に遅い処理であるため、スワップするデバイスには高速に<abbr "
-"title=\"Random Access Memory\">RAM</abbr>にアクセスすることができなくなる恐れ"
-"があります。"
-
-msgid "Ignore Hosts files"
-msgstr "ホストファイルを無視する"
-
-msgid "Ignore interface"
-msgstr "インターフェースを無視する"
-
-msgid "Ignore resolve file"
-msgstr "リゾルバファイルを無視する"
-
-msgid "Image"
-msgstr "イメージ"
-
-msgid "In"
-msgstr "イン"
-
-msgid "Inactivity timeout"
-msgstr "未使用時タイムアウト"
-
-msgid "Inbound:"
-msgstr "受信:"
-
-msgid "Info"
-msgstr "情報"
-
-msgid "Initscript"
-msgstr "起動スクリプト"
-
-msgid "Initscripts"
-msgstr "起動スクリプト"
-
-msgid "Install"
-msgstr "インストール"
-
-msgid "Install package %q"
-msgstr "%q パッケージをインストールします"
-
-msgid "Install protocol extensions..."
-msgstr "プロトコル拡張機能をインストールします..."
-
-msgid "Installed packages"
-msgstr "インストール済みパッケージ"
-
-msgid "Interface"
-msgstr "インターフェース"
-
-msgid "Interface Configuration"
-msgstr "インターフェース設定"
-
-msgid "Interface Overview"
-msgstr "インターフェース概要"
-
-msgid "Interface is reconnecting..."
-msgstr "インターフェース再接続中..."
-
-msgid "Interface is shutting down..."
-msgstr "インターフェース終了中..."
-
-msgid "Interface not present or not connected yet."
-msgstr "インターフェースが存在しないか、接続していません"
-
-msgid "Interface reconnected"
-msgstr "インターフェースの再接続"
-
-msgid "Interface shut down"
-msgstr "インターフェースの終了"
-
-msgid "Interfaces"
-msgstr "インターフェース"
-
-msgid "Internal Server Error"
-msgstr "内部サーバーエラー"
-
-msgid "Invalid"
-msgstr "入力値が不正です"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "無効なVLAN IDです! IDは%dから%dまでの値のみ入力可能です。"
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "無効なVLAN IDです! ユニークなIDを入力してください。"
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "ユーザー名とパスワードが不正です! もう一度入力してください。"
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"更新しようとしたイメージファイルはこのフラッシュメモリに適合しません。もう一"
-"度イメージファイルを確認してください!"
-
-msgid "Java Script required!"
-msgstr "JavaScriptを有効にしてください!"
-
-msgid "Join Network"
-msgstr "ネットワークに接続する"
-
-msgid "Join Network: Settings"
-msgstr "ネットワークに接続する: 設定"
-
-msgid "Join Network: Wireless Scan"
-msgstr "ネットワークに接続する: 無線LANスキャン"
-
-msgid "Keep settings"
-msgstr "設定を保持する"
-
-msgid "Kernel Log"
-msgstr "カーネルログ"
-
-msgid "Kernel Version"
-msgstr "カーネルバージョン"
-
-msgid "Key"
-msgstr "暗号キー"
-
-msgid "Key #%d"
-msgstr "キー #%d"
-
-msgid "Kill"
-msgstr "強制終了"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "L2TP サーバー"
-
-msgid "LCP echo failure threshold"
-msgstr "LCP echo 失敗数しきい値"
-
-msgid "LCP echo interval"
-msgstr "LCP echo 送信間隔"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "ラベル"
-
-msgid "Language"
-msgstr "言語"
-
-msgid "Language and Style"
-msgstr "言語とスタイル"
-
-msgid "Lease validity time"
-msgstr "リース有効時間"
-
-msgid "Leasefile"
-msgstr "リースファイル"
-
-msgid "Leasetime"
-msgstr "リース時間"
-
-msgid "Leasetime remaining"
-msgstr "残りリース時間"
-
-msgid "Leave empty to autodetect"
-msgstr "空欄の場合、自動検知を行います"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "空欄の場合、現在のWANアドレスを使用します"
-
-msgid "Legend:"
-msgstr "凡例:"
-
-msgid "Limit"
-msgstr "割り当て数"
-
-msgid "Link On"
-msgstr "リンクオン"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"問い合わせを転送する<abbr title=\"Domain Name System\">DNS</abbr> サーバーの"
-"リストを設定します"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "RFC1918の応答を許可するリスト"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-"指定したインターフェースでのみアクセスを有効にします。設定しない場合はすべて"
-"のインタフェースが対象です"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "DNSクエリを受信するポート"
-
-msgid "Load"
-msgstr "負荷"
-
-msgid "Load Average"
-msgstr "システム平均負荷"
-
-msgid "Loading"
-msgstr "ロード中"
-
-msgid "Local IPv4 address"
-msgstr "ローカル IPv4 アドレス"
-
-msgid "Local IPv6 address"
-msgstr "ローカル IPv6 アドレス"
-
-msgid "Local Startup"
-msgstr "ローカル Startup"
-
-msgid "Local Time"
-msgstr "時刻"
-
-msgid "Local domain"
-msgstr "ローカルドメイン"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr "ローカルサーバー"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr "ローカライズクエリ"
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr "ログ出力レベル"
-
-msgid "Log queries"
-msgstr "ログクエリー"
-
-msgid "Logging"
-msgstr "ログ"
-
-msgid "Login"
-msgstr "ログイン"
-
-msgid "Logout"
-msgstr "ログアウト"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-"ネットワークアドレスをオフセットとして、最小のアドレスを設定してください"
-
-msgid "MAC-Address"
-msgstr "MAC-アドレス"
-
-msgid "MAC-Address Filter"
-msgstr "MAC-アドレスフィルタ"
-
-msgid "MAC-Filter"
-msgstr "MAC-フィルタ"
-
-msgid "MAC-List"
-msgstr "MAC-リスト"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "最大レート"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "DHCPリースの許可される最大数"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "並列DNSクエリの許可される最大数"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "EDNS.0 UDP パケットサイズの許可される最大数"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "モデムが準備完了状態になるまでの最大待ち時間"
-
-msgid "Maximum hold time"
-msgstr "最大保持時間"
-
-msgid "Maximum number of leased addresses."
-msgstr "リースするアドレスの最大数です"
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "メモリー"
-
-msgid "Memory usage (%)"
-msgstr "メモリ使用率 (%)"
-
-msgid "Metric"
-msgstr "メトリック"
-
-msgid "Minimum Rate"
-msgstr "最小レート"
-
-msgid "Minimum hold time"
-msgstr "最短保持時間"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "プロトコル %qのプロトコル拡張が見つかりません"
-
-msgid "Mode"
-msgstr "モード"
-
-msgid "Modem device"
-msgstr "モデムデバイス"
-
-msgid "Modem init timeout"
-msgstr "モデム初期化タイムアウト"
-
-msgid "Monitor"
-msgstr "モニター"
-
-msgid "Mount Entry"
-msgstr "マウント機能"
-
-msgid "Mount Point"
-msgstr "マウントポイント"
-
-msgid "Mount Points"
-msgstr "マウントポイント"
-
-msgid "Mount Points - Mount Entry"
-msgstr "マウントポイント - マウント"
-
-msgid "Mount Points - Swap Entry"
-msgstr "マウントポイント - スワップ"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"マウントポイントは、記憶デバイスがファイルシステムのどこに接続されているかを"
-"表示しています。"
-
-msgid "Mount options"
-msgstr "マウントオプション"
-
-msgid "Mount point"
-msgstr "マウントポイント"
-
-msgid "Mounted file systems"
-msgstr "マウント中のファイルシステム"
-
-msgid "Move down"
-msgstr "下へ"
-
-msgid "Move up"
-msgstr "上へ"
-
-msgid "Multicast Rate"
-msgstr "マルチキャストレート"
-
-msgid "Multicast address"
-msgstr "マルチキャストアドレス"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "NTPサーバー候補"
-
-msgid "Name"
-msgstr "名前"
-
-msgid "Name of the new interface"
-msgstr "新しいインターフェースの名前"
-
-msgid "Name of the new network"
-msgstr "新しいネットワークの名前"
-
-msgid "Navigation"
-msgstr "ナビゲーション"
-
-msgid "Netmask"
-msgstr "ネットマスク"
-
-msgid "Network"
-msgstr "ネットワーク"
-
-msgid "Network Utilities"
-msgstr "ネットワーク・ユーティリティ"
-
-msgid "Network boot image"
-msgstr "ネットワーク・ブート用イメージ"
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr "次 »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "このインターフェースにはDHCPサーバーが設定されていません"
-
-msgid "No chains in this table"
-msgstr "チェイン内にルールがありません"
-
-msgid "No files found"
-msgstr "ファイルが見つかりませんでした"
-
-msgid "No information available"
-msgstr "情報がありません"
-
-msgid "No negative cache"
-msgstr "ネガティブキャッシュを行なわない"
-
-msgid "No network configured on this device"
-msgstr "このデバイスに設定されているネットワークがありません"
-
-msgid "No network name specified"
-msgstr "ネットワーク名が設定されていません"
-
-msgid "No package lists available"
-msgstr "パッケージリストがありません"
-
-msgid "No password set!"
-msgstr "パスワードが設定されていません!"
-
-msgid "No rules in this chain"
-msgstr "チェイン内にルールがありません"
-
-msgid "No zone assigned"
-msgstr "ゾーンが設定されていません"
-
-msgid "Noise"
-msgstr "ノイズ"
-
-msgid "Noise:"
-msgstr "ノイズ:"
-
-msgid "None"
-msgstr "なし"
-
-msgid "Normal"
-msgstr "標準"
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr "アソシエーションされていません"
-
-msgid "Not connected"
-msgstr "未接続"
-
-msgid "Note: Configuration files will be erased."
-msgstr "注意: 設定ファイルは消去されます。"
-
-msgid "Notice"
-msgstr "注意"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "OPKG-設定"
-
-msgid "Off-State Delay"
-msgstr "消灯時間"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"このページではネットワークインターフェースの設定を行うことが出来ます。\"ブ"
-"リッジインターフェース\"フィールドをチェックし、複数のネットワークインター"
-"フェース名をスペースで区切りで入力することで複数のインターフェースをブリッジ"
-"することが出来ます。また、<samp>INTERFACE.VLANNR</samp>という表記により<abbr "
-"title=\"Virtual Local Area Network\">VLAN</abbr>も使用することが出来ます。"
-"(<abbr title=\"for example\">例</abbr>: <samp>eth0.1</samp>)"
-
-msgid "On-State Delay"
-msgstr "点灯時間"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "1つ以上のフィールドに無効な値が設定されています！"
-
-msgid "One or more required fields have no value!"
-msgstr "1つ以上のフィールドに値が設定されていません！"
-
-msgid "Open list..."
-msgstr "リストを開く"
-
-msgid "Option changed"
-msgstr "変更されるオプション"
-
-msgid "Option removed"
-msgstr "削除されるオプション"
-
-msgid "Options"
-msgstr "オプション"
-
-msgid "Other:"
-msgstr "その他:"
-
-msgid "Out"
-msgstr "アウト"
-
-msgid "Outbound:"
-msgstr "送信:"
-
-msgid "Outdoor Channels"
-msgstr "屋外用周波数"
-
-msgid "Override MAC address"
-msgstr "MACアドレスを上書きする"
-
-msgid "Override MTU"
-msgstr "MTUを上書きする"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "DHCPレスポンス内のゲートウェイアドレスを上書きする"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"クライアントへ通知するネットマスクを上書きします。通常は、設定されているサブ"
-"ネットから計算されます。"
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "概要"
-
-msgid "Owner"
-msgstr "所有者"
-
-msgid "PAP/CHAP password"
-msgstr "PAP/CHAP パスワード"
-
-msgid "PAP/CHAP username"
-msgstr "PAP/CHAP ユーザー名"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "PPPoAカプセル化"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "libiwinfo パッケージをインストールしてください！"
-
-msgid "Package lists are older than 24 hours"
-msgstr "パッケージリストは24時間以上前のものです"
-
-msgid "Package name"
-msgstr "パッケージ名"
-
-msgid "Packets"
-msgstr "パケット"
-
-msgid "Part of zone %q"
-msgstr "ゾーン %qの一部"
-
-msgid "Password"
-msgstr "パスワード"
-
-msgid "Password authentication"
-msgstr "パスワード認証"
-
-msgid "Password of Private Key"
-msgstr "秘密鍵のパスワード"
-
-msgid "Password successfully changed!"
-msgstr "パスワードを変更しました"
-
-msgid "Path to CA-Certificate"
-msgstr "CA証明書のパス"
-
-msgid "Path to Client-Certificate"
-msgstr "クライアント証明書のパス"
-
-msgid "Path to Private Key"
-msgstr "秘密鍵のパス"
-
-msgid "Path to executable which handles the button event"
-msgstr "ボタンイベントをハンドルする実行ファイルのパス"
-
-msgid "Peak:"
-msgstr "ピーク:"
-
-msgid "Perform reboot"
-msgstr "再起動を実行"
-
-msgid "Perform reset"
-msgstr "設定リセットを実行"
-
-msgid "Phy Rate:"
-msgstr "物理レート:"
-
-msgid "Physical Settings"
-msgstr "デバイス設定"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "パケット"
-
-msgid "Please enter your username and password."
-msgstr "ユーザー名とパスワードを入力してください。"
-
-msgid "Please wait: Device rebooting..."
-msgstr "しばらくお待ちください: 再起動中です..."
-
-msgid "Policy"
-msgstr "ポリシー"
-
-msgid "Port"
-msgstr "ポート"
-
-msgid "Port %d"
-msgstr "ポート %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr "ポート ステータス:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"設定回数のLCP echo 確認失敗後、ピアノードがダウンしているものと見なします。0"
-"を設定した場合、失敗しても無視します"
-
-msgid "Prevents client-to-client communication"
-msgstr "クライアント同士の通信を制限します"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Prism2/2.5/3 802.11b 無線LANコントローラ"
-
-msgid "Proceed"
-msgstr "続行"
-
-msgid "Processes"
-msgstr "プロセス"
-
-msgid "Prot."
-msgstr "プロトコル"
-
-msgid "Protocol"
-msgstr "プロトコル"
-
-msgid "Protocol family"
-msgstr "プロトコルファミリ"
-
-msgid "Protocol of the new interface"
-msgstr "新しいインターフェースのプロトコル"
-
-msgid "Protocol support is not installed"
-msgstr "プロトコルサポートがインストールされていません"
-
-msgid "Provide NTP server"
-msgstr "NTPサーバー機能を有効にする"
-
-msgid "Provide new network"
-msgstr "新しいネットワークを設定する"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "擬似アドホック (ahdemo)"
-
-msgid "Quality"
-msgstr "クオリティ"
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS閾値"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "受信レート"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "RaLink 802.11%s 無線LANコントローラ"
-
-msgid "Radius-Accounting-Port"
-msgstr "Radiusアカウントサーバー・ポート番号"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Radiusアカウント秘密鍵"
-
-msgid "Radius-Accounting-Server"
-msgstr "Radiusアカウントサーバー"
-
-msgid "Radius-Authentication-Port"
-msgstr "Radius認証サーバー・ポート番号"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Radius認証秘密鍵"
-
-msgid "Radius-Authentication-Server"
-msgstr "Radius認証サーバー"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>サーバーの設定"
-"として<code>/etc/ethers</code> をロードします"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"本当にこのインターフェースを削除しますか?一度削除すると、元に戻すことはできま"
-"せん!\n"
-"このインターフェースを経由して接続している場合、デバイスにアクセスできなくな"
-"る場合があります。"
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"本当にこの無線ネットワークを削除しますか?一度削除すると、元に戻すことはできま"
-"せん!\n"
-"このネットワークを経由して接続している場合、デバイスにアクセスできなくなる場"
-"合があります。"
-
-msgid "Really reset all changes?"
-msgstr "本当に全ての変更をリセットしますか?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"本当にインターフェース \"%s\" を停止しますか?\n"
-"このインターフェースを経由して接続している場合、デバイスにアクセスできなくな"
-"る場合があります。"
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"本当にネットワークを停止しますか?\n"
-"このネットワークを経由して接続している場合、デバイスにアクセスできなくなる場"
-"合があります。"
-
-msgid "Really switch protocol?"
-msgstr "本当にプロトコルを切り替えますか?"
-
-msgid "Realtime Connections"
-msgstr "リアルタイム・コネクション"
-
-msgid "Realtime Graphs"
-msgstr "リアルタイム・グラフ"
-
-msgid "Realtime Load"
-msgstr "リアルタイム・ロード"
-
-msgid "Realtime Traffic"
-msgstr "リアルタイム・トラフィック"
-
-msgid "Realtime Wireless"
-msgstr "リアルタイム・無線LAN"
-
-msgid "Rebind protection"
-msgstr "DNSリバインディング・プロテクション"
-
-msgid "Reboot"
-msgstr "再起動"
-
-msgid "Rebooting..."
-msgstr "再起動中..."
-
-msgid "Reboots the operating system of your device"
-msgstr "デバイスのオペレーティングシステムを再起動します。"
-
-msgid "Receive"
-msgstr "受信"
-
-msgid "Receiver Antenna"
-msgstr "受信アンテナ"
-
-msgid "Reconnect this interface"
-msgstr "インターフェースの再接続"
-
-msgid "Reconnecting interface"
-msgstr "インターフェース再接続中"
-
-msgid "References"
-msgstr "参照カウンタ"
-
-msgid "Regulatory Domain"
-msgstr "規制ドメイン"
-
-msgid "Relay"
-msgstr "リレー"
-
-msgid "Relay Bridge"
-msgstr "リレーブリッジ"
-
-msgid "Relay between networks"
-msgstr "ネットワーク間のリレー設定"
-
-msgid "Relay bridge"
-msgstr "リレーブリッジ"
-
-msgid "Remote IPv4 address"
-msgstr "リモートIPv4アドレス"
-
-msgid "Remove"
-msgstr "削除"
-
-msgid "Repeat scan"
-msgstr "再スキャン"
-
-msgid "Replace entry"
-msgstr "エントリーの置換"
-
-msgid "Replace wireless configuration"
-msgstr "無線設定を置換する"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "DOCSIS 3.0を使用するいくつかのISPでは必要になります"
-
-msgid "Reset"
-msgstr "リセット"
-
-msgid "Reset Counters"
-msgstr "カウンタのリセット"
-
-msgid "Reset to defaults"
-msgstr "標準設定にリセット"
-
-msgid "Resolv and Hosts Files"
-msgstr "名前解決およびホストファイル設定"
-
-msgid "Resolve file"
-msgstr "リゾルバファイル"
-
-msgid "Restart"
-msgstr "再起動"
-
-msgid "Restart Firewall"
-msgstr "ファイアウォールの再起動"
-
-msgid "Restore backup"
-msgstr "バックアップから復元する"
-
-msgid "Reveal/hide password"
-msgstr "パスワードを表示する/隠す"
-
-msgid "Revert"
-msgstr "元に戻す"
-
-msgid "Root"
-msgstr "ルート"
-
-msgid "Root directory for files served via TFTP"
-msgstr "TFTP経由でファイルを取り扱う際のルートディレクトリ"
-
-msgid "Router Model"
-msgstr "ルーターモデル"
-
-msgid "Router Name"
-msgstr "ルーター名"
-
-msgid "Router Password"
-msgstr "ルーター・パスワード"
-
-msgid "Routes"
-msgstr "経路情報"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"特定のホスト又はネットワークに、どのインターフェース及びゲートウェイを通して"
-"通信を行うか、経路情報を設定します。"
-
-msgid "Rule #"
-msgstr "ルール #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "デバイスのマウントを行う前にファイルシステムチェックを行う"
-
-msgid "Run filesystem check"
-msgstr "ファイルシステムチェックを行う"
-
-msgid "SSH Access"
-msgstr "SSHアクセス"
-
-msgid "SSH-Keys"
-msgstr "SSHキー"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "保存"
-
-msgid "Save & Apply"
-msgstr "保存 & 適用"
-
-msgid "Save &#38; Apply"
-msgstr "保存 &#38; 適用"
-
-msgid "Scan"
-msgstr "スキャン"
-
-msgid "Scheduled Tasks"
-msgstr "スケジュールタスク"
-
-msgid "Section added"
-msgstr "追加されるセクション"
-
-msgid "Section removed"
-msgstr "削除されるセクション"
-
-msgid "See \"mount\" manpage for details"
-msgstr "詳細情報は \"mount\" のmanページを参照してください"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"設定された秒間隔でLCP echoリクエストを送信します。失敗数しきい値を設定した場"
-"合のみ、機能が有効になります。"
-
-msgid "Send router solicitations"
-msgstr "ルータ要請を送信する"
-
-msgid "Separate Clients"
-msgstr "クライアントの分離"
-
-msgid "Separate WDS"
-msgstr "WDSを分離する"
-
-msgid "Server Settings"
-msgstr "サーバー設定"
-
-msgid "Service Name"
-msgstr "サービス名"
-
-msgid "Service Type"
-msgstr "サービスタイプ"
-
-msgid "Services"
-msgstr "サービス"
-
-msgid "Setup DHCP Server"
-msgstr "DHCPサーバーを設定"
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr "現在のバックアップファイルのリストを表示する"
-
-msgid "Shutdown this interface"
-msgstr "インターフェースを終了"
-
-msgid "Shutdown this network"
-msgstr "ネットワークを終了"
-
-msgid "Signal"
-msgstr "信号強度"
-
-msgid "Signal:"
-msgstr "信号:"
-
-msgid "Size"
-msgstr "サイズ"
-
-msgid "Skip"
-msgstr "スキップ"
-
-msgid "Skip to content"
-msgstr "コンテンツへ移動"
-
-msgid "Skip to navigation"
-msgstr "ナビゲーションへ移動"
-
-msgid "Slot time"
-msgstr "スロット時間"
-
-msgid "Software"
-msgstr "ソフトウェア"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "無効な値が設定されているフィールドがあるため、保存できません。"
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "申し訳ありません。サーバーに予期せぬエラーが発生しました。"
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"申し訳ありません。現在このボードではsysupgradeがサポートがされていないため、"
-"ファームウェア更新は手動で行っていただく必要があります。OpenWrt wikiを参照し"
-"て、このデバイスのインストール手順を参照してください。"
-
-msgid "Sort"
-msgstr "ソート"
-
-msgid "Source"
-msgstr "送信元"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "通知する推奨有効時間を設定してください。(秒単位)"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "通知する最終有効時間を設定してください。(秒単位)"
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr "デバイスが接続するディレクトリを設定します"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "<em>Dropbear</em>の受信ポートを設定してください"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr "暗号鍵を設定します。"
-
-msgid "Start"
-msgstr "開始"
-
-msgid "Start priority"
-msgstr "優先順位"
-
-msgid "Startup"
-msgstr "Startup"
-
-msgid "Static IPv4 Routes"
-msgstr "IPv4 静的ルーティング"
-
-msgid "Static IPv6 Routes"
-msgstr "IPv6 静的ルーティング"
-
-msgid "Static Leases"
-msgstr "静的リース"
-
-msgid "Static Routes"
-msgstr "静的ルーティング"
-
-msgid "Static WDS"
-msgstr "静的WDS"
-
-msgid "Static address"
-msgstr "静的アドレス"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"静的リース機能は、DHCPクライアントに対して固定のIPアドレス及び一時的なホスト"
-"名をアサインします。また、クライアントは対応するリースを使用するホストがその1"
-"台のみで、かつ静的なインターフェース設定にする必要があります。"
-
-msgid "Status"
-msgstr "ステータス"
-
-msgid "Stop"
-msgstr "停止"
-
-msgid "Strict order"
-msgstr "問い合わせの制限"
-
-msgid "Submit"
-msgstr "送信"
-
-msgid "Swap Entry"
-msgstr "スワップ機能"
-
-msgid "Switch"
-msgstr "スイッチ"
-
-msgid "Switch %q"
-msgstr "スイッチ %q"
-
-msgid "Switch %q (%s)"
-msgstr "スイッチ %q (%s)"
-
-msgid "Switch protocol"
-msgstr "プロトコルの切り替え"
-
-msgid "Sync with browser"
-msgstr "ブラウザの時刻と同期"
-
-msgid "Synchronizing..."
-msgstr "同期中..."
-
-msgid "System"
-msgstr "システム"
-
-msgid "System Log"
-msgstr "システムログ"
-
-msgid "System Properties"
-msgstr "システム・プロパティ"
-
-msgid "System log buffer size"
-msgstr "システムログ・バッファサイズ"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "TFTP設定"
-
-msgid "TFTP server root"
-msgstr "TFTPサーバー・ルート"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "送信レート"
-
-msgid "Table"
-msgstr "テーブル"
-
-msgid "Target"
-msgstr "ターゲット"
-
-msgid "Terminate"
-msgstr "停止"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"<em>デバイス設定</em>セクションでは、チャネル、送信出力、アンテナ設定などの無"
-"線ハードウェアの設定を行います。また、無線ハードウェアがマルチSSID機能をサ"
-"ポートしている場合、これらの設定は全て共通の設定として扱われます。暗号化設定"
-"や無線モードなどのネットワーク毎の設定は、<em>インターフェース設定</em>で設定"
-"を行います。"
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"<em>libiwinfo-lua</em> パッケージがインストールされていません。無線設定機能を"
-"正しく動作させるために、このパッケージをインストールする必要があります。"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"使用可能な文字は右記の通りです: <code>A-Z</code>, <code>a-z</code>, "
-"<code>0-9</code>, <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"デバイスファイルまたはパーティション(<abbr title=\"for example\">例</abbr> "
-"<code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"記憶領域をフォーマットしているファイルシステムを指定します。(<abbr title="
-"\"for example\">例</abbr> <samp><abbr title=\"Third Extended Filesystem"
-"\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"更新用イメージがアップロードされました。以下はそのチェックサム及びファイルサ"
-"イズです。オリジナルファイルと比較し、整合性を確認してください。<br />\"続行"
-"\"ボタンをクリックすると、更新処理を開始します。"
-
-msgid "The following changes have been committed"
-msgstr "以下の変更が適用されました"
-
-msgid "The following changes have been reverted"
-msgstr "以下の変更が取り消されました"
-
-msgid "The following rules are currently active on this system."
-msgstr "本システムでは、現在以下のルールが有効になっています。"
-
-msgid "The given network name is not unique"
-msgstr "設定されたネットワーク名はユニークなものではありません"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"本ハードウェアではマルチESSIDを設定することができないため、続行した場合、設定"
-"は既存の設定と置き換えられます。"
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr "選択中のプロトコルを使用する場合、デバイスを設定する必要があります"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr "システムは設定領域を消去中です。完了後、自動的に再起動します。"
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"システム更新中です。<br />絶対に電源を切らないでください！<br />ルーターの再"
-"接続まで数分お待ち下さい。システムが更新されることにより、ルーターの設定が変"
-"わる可能性があるため、再接続時にあなたのコンピュータのIPアドレスを変更しなけ"
-"ればならない場合があります。"
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"アップロードされたイメージファイルは、このボードでサポートされているフォー"
-"マットではありません。このプラットフォームに適合したイメージファイルかどう"
-"か、確認してください。"
-
-msgid "There are no active leases."
-msgstr "リース中のIPアドレスはありません。"
-
-msgid "There are no pending changes to apply!"
-msgstr "適用が未完了の変更はありません！"
-
-msgid "There are no pending changes to revert!"
-msgstr "復元が未完了の変更はありません！"
-
-msgid "There are no pending changes!"
-msgstr "未完了の変更はありません！"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"デバイスが設定されていません。\"デバイス設定\"タブで、ネットワークデバイスを"
-"選択してください。"
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"ルーターにパスワードが設定されていません。Webインターフェースの保護及びSSH"
-"サービスを有効にするために、管理者パスワードを設定してください。"
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"以下は、sysupgrade中にバックアップ対象に含めるファイルとディレクトリのパター"
-"ンリストです。/etc/config/内の設定ファイル及びその他特定の設定ファイルは自動"
-"的に保持されます。"
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"ログイン名ではなく、32バイト、16進数でエンコードされたユーザーIDを設定してく"
-"ださい"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"/etc/rc.localを表示しています。あなたの実行したいコマンドを'exit 0'行より上に"
-"入力してください。これらのコマンドはブートプロセスの最後に実行されます。"
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"プロバイダからアサインされた、ローカルのエンドポイント・アドレスです。通常、"
-"<code>:2</code>が終端に設定されます。"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"ローカルネットワーク内のみの <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr>として使用する"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"スケジュールタスクシステムを使用することで、定期的に特定のタスクの実行を行う"
-"ことが可能です。"
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"このリストは現在システムで動作しているプロセスとそのステータスを表示していま"
-"す。"
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "このページでは、ボタンの動作を変更することができます。"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "このページでは、現在アクティブなネットワーク接続を表示します。"
-
-msgid "This section contains no values yet"
-msgstr "このセクションは未設定です。"
-
-msgid "Time Synchronization"
-msgstr "時刻設定"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "時刻同期機能はまだ設定されていません。"
-
-msgid "Timezone"
-msgstr "タイムゾーン"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"設定を復元するには、作成しておいたバックアップアーカイブをアップロードしてく"
-"ださい。"
-
-msgid "Total Available"
-msgstr "合計"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "トラフィック"
-
-msgid "Transfer"
-msgstr "転送"
-
-msgid "Transmission Rate"
-msgstr "転送レート"
-
-msgid "Transmit"
-msgstr "送信"
-
-msgid "Transmit Power"
-msgstr "電波出力"
-
-msgid "Transmitter Antenna"
-msgstr "送信アンテナ"
-
-msgid "Trigger"
-msgstr "トリガー"
-
-msgid "Trigger Mode"
-msgstr "トリガーモード"
-
-msgid "Tunnel ID"
-msgstr "トンネル ID"
-
-msgid "Tunnel Interface"
-msgstr "トンネルインターフェース"
-
-msgid "Turbo Mode"
-msgstr "ターボモード"
-
-msgid "Tx-Power"
-msgstr "送信電力"
-
-msgid "Type"
-msgstr "タイプ"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "UMTSのみ"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "USBデバイス"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr "不明"
-
-msgid "Unknown Error, password not changed!"
-msgstr "不明なエラーです。パスワードは変更されていません！"
-
-msgid "Unmanaged"
-msgstr "Unmanaged"
-
-msgid "Unsaved Changes"
-msgstr "保存されていない変更"
-
-msgid "Unsupported protocol type."
-msgstr "サポートされていないプロトコルタイプ"
-
-msgid "Update lists"
-msgstr "リストの更新"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"使用中のファームウェアをアップデートするために、sysupgrade機能に互換性のある"
-"ファームウェアイメージをアップロードしてください。\"設定の保持\"を有効にする"
-"と、現在の設定を維持してアップデートを行います。ただし、OpenWrt互換のファーム"
-"ウェアイメージの場合のみ、設定は保持されます。"
-
-msgid "Upload archive..."
-msgstr "アーカイブをアップロード"
-
-msgid "Uploaded File"
-msgstr "アップロード完了"
-
-msgid "Uptime"
-msgstr "起動時間"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "<code>/etc/ethers</code> を使用する"
-
-msgid "Use DHCP gateway"
-msgstr "DHCPゲートウェイを使用する"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "ピアから通知されたDNSサーバーを使用する"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "ISO/IEC 3166 alpha2の国コードを使用します。"
-
-msgid "Use MTU on tunnel interface"
-msgstr "トンネルインターフェースのMTUを設定"
-
-msgid "Use TTL on tunnel interface"
-msgstr "トンネルインターフェースのTTLを設定"
-
-msgid "Use as root filesystem"
-msgstr "ルート・ファイルシステムとして使用する"
-
-msgid "Use broadcast flag"
-msgstr "ブロードキャスト・フラグを使用する"
-
-msgid "Use custom DNS servers"
-msgstr "DNSサーバーを手動で設定"
-
-msgid "Use default gateway"
-msgstr "デフォルトゲートウェイを使用する"
-
-msgid "Use gateway metric"
-msgstr "ゲートウェイ・メトリックを使用する"
-
-msgid "Use preferred lifetime"
-msgstr "推奨有効時間"
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"<em>追加</em> ボタンを押して、新しくエントリーを作成してください。<em>MAC-ア"
-"ドレス</em> はそのホストを識別し, <em>IPv4-アドレス</em> には払いだす固定のア"
-"ドレスを設定します。また、<em>ホスト名</em> はそのホストに対して一時的なホス"
-"ト名をアサインします。"
-
-msgid "Use valid lifetime"
-msgstr "最終有効時間"
-
-msgid "Used"
-msgstr "使用"
-
-msgid "Used Key Slot"
-msgstr "使用するキースロット"
-
-msgid "Username"
-msgstr "ユーザー名"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "VLANインターフェース"
-
-msgid "VLANs on %q"
-msgstr "%q上のVLANs"
-
-msgid "VLANs on %q (%s)"
-msgstr "%q上のVLAN (%s)"
-
-msgid "VPN Server"
-msgstr "VPN サーバー"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "DHCPリクエスト送信時のベンダークラスを設定"
-
-msgid "Verify"
-msgstr "確認"
-
-msgid "Version"
-msgstr "バージョン"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "WEP オープンシステム"
-
-msgid "WEP Shared Key"
-msgstr "WEP 共有キー"
-
-msgid "WEP passphrase"
-msgstr "WEP 暗号フレーズ"
-
-msgid "WMM Mode"
-msgstr "WMM モード"
-
-msgid "WPA passphrase"
-msgstr "WPA 暗号フレーズ"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA暗号化を使用する場合、wpa_supplicant (クライアントモードの場合)又は "
-"hostapd (アクセスポイント及びアドホック) がインストールされている必要がありま"
-"す。"
-
-msgid "Waiting for changes to be applied..."
-msgstr "変更を適用中です..."
-
-msgid "Waiting for command to complete..."
-msgstr "コマンド実行中です..."
-
-msgid "Warning"
-msgstr "警告"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "警告: 保存されていない変更は再起動後に失われます!"
-
-msgid "Wifi"
-msgstr "無線LAN"
-
-msgid "Wireless"
-msgstr "無線"
-
-msgid "Wireless Adapter"
-msgstr "無線アダプタ"
-
-msgid "Wireless Network"
-msgstr "無線ネットワーク"
-
-msgid "Wireless Overview"
-msgstr "無線LAN概要"
-
-msgid "Wireless Security"
-msgstr "無線LANセキュリティ"
-
-msgid "Wireless is disabled or not associated"
-msgstr "無線LAN機能が無効になっているか、アソシエーションされていません"
-
-msgid "Wireless is restarting..."
-msgstr "無線LAN機能再起動中..."
-
-msgid "Wireless network is disabled"
-msgstr "無線LAN機能は無効になっています"
-
-msgid "Wireless network is enabled"
-msgstr "無線LAN機能は有効になっています"
-
-msgid "Wireless restarted"
-msgstr "無線LAN機能の再起動"
-
-msgid "Wireless shut down"
-msgstr "無線LAN機能停止"
-
-msgid "Write received DNS requests to syslog"
-msgstr "受信したDNSリクエストをsyslogへ記録します"
-
-msgid "XR Support"
-msgstr "XRサポート"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"ルーターが起動する際のサービスの有効化/無効化を行うことができます。また、変更"
-"は再起動後に適用されます。<br /><strong>警告: \"network\"のような重要なサービ"
-"スを無効にすると, ルーターにアクセスできなくなりますので、注意してください。"
-"</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "Java Scriptを有効にしない場合、LuCIは正しく動作しません。"
-
-msgid "any"
-msgstr "全て"
-
-msgid "auto"
-msgstr "自動"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "ブリッジ"
-
-msgid "create:"
-msgstr "作成:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "指定したインターフェースでブリッジを作成します"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "無効"
-
-msgid "expired"
-msgstr "期限切れ"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>リース情報を記"
-"録するファイル"
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr "全二重"
-
-msgid "half-duplex"
-msgstr "半二重"
-
-msgid "help"
-msgstr "ヘルプ"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "ターゲットがネットワークの場合"
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "ローカル <abbr title=\"Domain Name System\">DNS</abbr>ファイル"
-
-msgid "no"
-msgstr "いいえ"
-
-msgid "no link"
-msgstr "リンクなし"
-
-msgid "none"
-msgstr "なし"
-
-msgid "off"
-msgstr "オフ"
-
-msgid "on"
-msgstr "オン"
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr "routed"
-
-msgid "tagged"
-msgstr "tagged"
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr "無期限"
-
-msgid "unspecified"
-msgstr "設定しない"
-
-msgid "unspecified -or- create:"
-msgstr "設定しない -又は- 作成:"
-
-msgid "untagged"
-msgstr "untagged"
-
-msgid "yes"
-msgstr "はい"
-
-msgid "« Back"
-msgstr "« 戻る"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "ルーターに接続中..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "内蔵のNTPサーバーを有効にする"
-
-#~ msgid "Active Leases"
-#~ msgstr "有効なリース"
-
-#~ msgid "Open"
-#~ msgstr "開く"
-
-#~ msgid "KB"
-#~ msgstr "キロバイト"
-
-#~ msgid "Bit Rate"
-#~ msgstr "ビットレート"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "設定 / 適用"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "設定 / 変更箇所"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "設定 / 変更箇所の復元"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MACアドレス"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">暗号化</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-スキャン"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "この無線インターフェースを接続するネットワークを選択してください。<em>設定"
-#~ "しない</em>を選択すると、設定済みのネットワークを削除します。また、<em>作"
-#~ "成</em>フィールドにネットワーク名を入力すると、新しくネットワークを設定し"
-#~ "ます。"
-
-#~ msgid "Create Network"
-#~ msgstr "ネットワークの作成"
-
-#~ msgid "Link"
-#~ msgstr "リンク"
-
-#~ msgid "Networks"
-#~ msgstr "ネットワーク"
-
-#~ msgid "Power"
-#~ msgstr "出力"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "ローカル環境内の無線ネットワーク"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>表記: アドレス/"
-#~ "プレフィクス"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-サーバー"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr ""
-#~ "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-ブロードキャスト"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-アドレス"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "IPエイリアス"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "IPv6設定"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "注意: 他のネットワークに属するインターフェースを指定した場合, 選択したネッ"
-#~ "トワークへ移動します。"
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "本当にこのインターフェースを削除しますか? 削除すると元に戻すことはできませ"
-#~ "ん!\\nこのインターフェースを介してルーターにアクセスしている場合、ルーター"
-#~ "に接続できなくなる可能性があります。"
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "本当にこの無線ネットワークを削除しますか？ 削除すると元に戻すことはできま"
-#~ "せん!\\nこのネットワークを介してルーターにアクセスしている場合、ルーターに"
-#~ "接続できなくなる可能性があります。"
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "本当にインターフェース \"%s\" を削除しますか?\\nこのインターフェースを介し"
-#~ "てルーターにアクセスしている場合、ルーターに接続できなくなる可能性がありま"
-#~ "す。"
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "本当にこのネットワークを終了しますか?\\nこのインターフェースを介してルー"
-#~ "ターにアクセスしている場合、接続できなくなる可能性があります。"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "ルーターのネットワークポートはコンピューターがお互いに直接通信することが出"
-#~ "来る幾つかの <abbr title=\"Virtual Local Area Network\">VLAN</abbr>s を組"
-#~ "み合わせることが出来ます。<abbr title=\"Virtual Local Area Network"
-#~ "\">VLAN</abbr> は異なるネットワークセグメントに別ける際によく使われます。"
-#~ "例えばデフォルトの1つをインターネットの用な大きなネットワークの為のアップ"
-#~ "リンクポート接続に使用し、その他のポートをローカルネットワークに使用しま"
-#~ "す。"
-
-#~ msgid "Enable buffering"
-#~ msgstr "バッファリングを有効にする"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6-over-IPv4"
-
-#~ msgid "Custom Files"
-#~ msgstr "手動で指定したファイル"
-
-#~ msgid "Custom files"
-#~ msgstr "手動指定ファイル"
-
-#~ msgid "Detected Files"
-#~ msgstr "検出されたファイル"
-
-#~ msgid "Detected files"
-#~ msgstr "検出されたファイル"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "新しいファームウェアを書き込んだ時に維持するファイル"
-
-#~ msgid "General"
-#~ msgstr "一般"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "このページでは<abbr title=\"Lua Configuration Interface\">LuCI</abbr> の機"
-#~ "能と設定をカスタマイズ出来ます。"
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Post-commit actions"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr ""
-#~ "以下のファイルがシステムによって検出されました。これらのファイルはファーム"
-#~ "ウェア更新時に自動的に保存されます。"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "これらのコマンドはコミットされた <abbr title=\"Unified Configuration "
-#~ "Interface\">UCI</abbr>設定の変更を即座に適応する為に、自動的に実行されま"
-#~ "す。"
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr "<abbr title=\"Hypertext Transfer Protocol\">PPTP</abbr>-サーバー"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "AHCP 設定"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "ARP pingリトライ"
-
-#~ msgid "ATM Settings"
-#~ msgstr "ATM設定"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "ルーターアドバタイズを許可する"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "アクセスポイント (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "pppd 追加オプション"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "1からFFFFまで使用可能です。"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "自動切断"
-
-#~ msgid "Backup Archive"
-#~ msgstr "バックアップアーカイブ"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "ローカルDNSサーバーにPPP接続先から通知されたネームサーバーを使用するように"
-#~ "設定します"
-
-#~ msgid "Connect script"
-#~ msgstr "接続スクリプト"
-
-#~ msgid "Create backup"
-#~ msgstr "バックアップの作成"
-
-#~ msgid "Default"
-#~ msgstr "標準"
-
-#~ msgid "Disconnect script"
-#~ msgstr "切断スクリプト"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "パッケージリストとインストールターゲットの編集"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "4K VLANを有効にする"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "IPv6のPPPリンクを有効にする"
-
-#~ msgid "Firmware image"
-#~ msgstr "ファームウェア・イメージ"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "DHCPパケットの転送"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "ブロードキャストの転送"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "HE.net トンネルID"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "このページではルーターの設定のバックアップと復元と、可能であればルーターを"
-#~ "初期状態にリセットします。"
-
-#~ msgid "Installation targets"
-#~ msgstr "インストールターゲット"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "設定ファイルを保持する"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "キープアライブ"
-
-#~ msgid "Kernel"
-#~ msgstr "カーネル"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "接続に成功した後、pppdはデフォルトの経路をPPPインターフェースを使用する様"
-#~ "に変更します"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "PPPリンクの確立後、pppd はこのスクリプトを実行します。"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "PPPリンクの切断後、pppd はこのスクリプトを実行します。"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "PINコードが正しく入力されていることと、SIMカードがロックされていないことを"
-#~ "確認してください！"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "デーモンやサービスは、シェルアクセス、<abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>のようなWEBアクセス機能、メッシュルーティング機能、"
-#~ "メール送信機能など、デバイスやネットワークの機能を提供します。"
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "自動再接続時に行う接続テストの失敗数"
-
-#~ msgid "Override Gateway"
-#~ msgstr "ゲートウェイアドレスを上書きする"
-
-#~ msgid "PIN code"
-#~ msgstr "PINコード"
-
-#~ msgid "PPP Settings"
-#~ msgstr "PPP設定"
-
-#~ msgid "Package lists"
-#~ msgstr "パッケージリスト"
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "ポート PVIDs on %q"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "全ての設定を元に戻し、ファームウェアを初期状態にリセットしますか?"
-
-#~ msgid "Processor"
-#~ msgstr "プロセッサ"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radiusポート"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radiusサーバー"
-
-#~ msgid "Relay Settings"
-#~ msgstr "リレー設定"
-
-#~ msgid "Replace default route"
-#~ msgstr "デフォルトルートを置換する"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "ルーターを初期状態にリセット"
-
-#~ msgid "Routing table ID"
-#~ msgstr "経路テーブルID"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "接続する前に、モデムの準備が完了するための待ち時間を設けます（秒）"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "IPv4-アドレス サーバー"
-
-#~ msgid "Service type"
-#~ msgstr "サービス・タイプ"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "サービスとデーモンはデバイス上で、様々な処理を行ないます。"
-
-#~ msgid "Settings"
-#~ msgstr "設定"
-
-#~ msgid "Setup wait time"
-#~ msgstr "待ち時間の設定"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "申し訳ありません。OpenWrtではこのプラットフォーム上でのシステムアップレー"
-#~ "ドを行うことができません。<br />手動でデバイスを更新してください。"
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "pppd の追加のコマンドライン引数を指定します。"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "モデムのデバイスファイルを設定してください。(例: /dev/ttyUSB0)"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "指定した期間(秒)コネクションが使用されない場合に接続を閉じます"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "時刻サーバー (rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "トンネリング設定"
-
-#~ msgid "Update package lists"
-#~ msgstr "パッケージリストの更新"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "更新用のOpenWrtイメージファイルをアップロードしてください。"
-
-#~ msgid "Upload image"
-#~ msgstr "アップロード"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "ピアDNSを使用する"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr ""
-#~ "複数のDNSサーバーを設定することができます。Enterキーを押すと、エントリーを"
-#~ "追加できます。また、自動的に割り当てられたアドレスを、入力されたサーバーの"
-#~ "アドレスで上書きします。"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "サービスを追加して使用する場合、それぞれ対応するパッケージをインストールす"
-#~ "る必要があります。(UMTS/GPRS - \"comgt\"、PPPoE - \"ppp-mod-pppoe\"、"
-#~ "PPPoA - \"ppp-mod-pppoa\"、PPTP - \"pptp\")"
-
-#~ msgid "back"
-#~ msgstr "戻る"
-
-#~ msgid "buffered"
-#~ msgstr "バッファキャッシュ"
-
-#~ msgid "cached"
-#~ msgstr "ページキャッシュ"
-
-#~ msgid "free"
-#~ msgstr "空き"
-
-#~ msgid "static"
-#~ msgstr "静的"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> は <abbr title="
-#~ "\"Model-View-Controller\">MVC</abbr> ウェブフレームワークや組み込みデバイ"
-#~ "スの為のウェブインターフェースを含む、フリーの Lua ソフトウェアコレクショ"
-#~ "ンです。<abbr title=\"Lua Configuration Interface\">LuCI</abbr> は Apache-"
-#~ "License の元で配布されています。"
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-キー"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "軽量な HTTP/1.1 WEBサーバーはCとLuaで書かれ LuCI に役立つ様に設計されてい"
-#~ "ます"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>を動作させるのに使"
-#~ "用することが出来る小さな WEBサーバーです。"
-
-#~ msgid "About"
-#~ msgstr "情報"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "有効なIP接続"
-
-#~ msgid "Addresses"
-#~ msgstr "アドレス"
-
-#~ msgid "Admin Password"
-#~ msgstr "管理者パスワード"
-
-#~ msgid "Alias"
-#~ msgstr "エイリアス"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "認証レルム"
-
-#~ msgid "Bridge Port"
-#~ msgstr "ブリッジポート"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "システム管理者のパスワードを変更します(ユーザー <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "クライアント + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "設定ファイル"
-
-#~ msgid "Connection timeout"
-#~ msgstr "接続タイムアウト"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "貢献者"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP アサイン"
-
-#~ msgid "Document root"
-#~ msgstr "ドキュメントルート"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "キープアライブ機能を有効にする"
-
-#~ msgid "Enable device"
-#~ msgstr "デバイスを有効にする"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "イーサネットブリッジ"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "<abbr title=\"Secure Shell\">SSH</abbr>公開鍵認証で使用する <abbr title="
-#~ "\"Secure Shell\">SSH</abbr>公開鍵を１行づつ貼り付けてください。"
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP 設定"
-
-#~ msgid "Interface Status"
-#~ msgstr "インターフェース・ステータス"
-
-#~ msgid "Lead Development"
-#~ msgstr "開発リーダー"
-
-#~ msgid "Master"
-#~ msgstr "マスター"
-
-#~ msgid "Master + WDS"
-#~ msgstr "マスター + WDS"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "アドレスが設定されていません"
-
-#~ msgid "Not configured"
-#~ msgstr "未設定"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "パスワードを変更しました"
-
-#~ msgid "Plugin path"
-#~ msgstr "プラグインパス"
-
-#~ msgid "Ports"
-#~ msgstr "ポート"
-
-#~ msgid "Primary"
-#~ msgstr "プライマリ"
-
-#~ msgid "Project Homepage"
-#~ msgstr "プロジェクトホームページ"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "擬似アドホック"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "ありがとう"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr "レルムは保護されたページで認証プロンプトを表示します。"
-
-#~ msgid "Unknown Error"
-#~ msgstr "不明なエラー"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "デフォルトは <code>/etc/httpd.conf</code>"
-
-#~ msgid "Enable this switch"
-#~ msgstr "スイッチを有効にする"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKGエラーコード %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "パッケージリストを更新しました"
-
-#~ msgid "Reset switch during setup"
-#~ msgstr "起動時にスイッチをリセットする"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "インストールされているパッケージのアップグレード"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "また、カーネルやサービスのログファイルも現在の状態を得るために参照する事が"
-#~ "出来ます。"
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "ここでは、<abbr title=\"Central Processing Unit\">CPU</abbr>クロック周波"
-#~ "数、メモリ使用量やネットワークインターフェースデータなどの現在のシステムの"
-#~ "状態に関する情報を見つけることが出来ます。"
-
-#~ msgid "Search file..."
-#~ msgstr "Search file..."
-
-#~ msgid "Server"
-#~ msgstr "サーバー"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> は OpenWrt "
-#~ "Kamikaze の為の自由で、柔軟で、ユーザーフレンドリなグラフィカルインター"
-#~ "フェースです。"
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "それでは、あなたのルーターを楽しんでください!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "私たちとしては、いつでもこのインターフェースを改良したいと望んでおり、あな"
-#~ "たからのフィードバックと提案をお待ちしています。"
-
-#~ msgid "Hello!"
-#~ msgstr "こんにちは!"
-
-#~ msgid "LuCI Components"
-#~ msgstr "LuCIコンポーネント"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "注意: <abbr title=\"Lua Configuration Interface\">LuCI</abbr> で変更を行う"
-#~ "には適用前に「保存 &amp; 適用」をクリックして確認する必要があります。"
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "以下のページからルーターの全ての重要な設定を調整することが出来ます。"
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> チーム"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> の管理パネルです。"
-
-#~ msgid "User Interface"
-#~ msgstr "ユーザーインターフェース"
-
-#~ msgid "enable"
-#~ msgstr "有効"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr " (任意)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>サーバーはリゾルバファイルの"
-#~ "順に問い合わせを行います。"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>リース"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "APの分離"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "物理ネットワークに無線ネットワークを追加します"
-
-#~ msgid "Aliases"
-#~ msgstr "エイリアス"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "ネットワークの作成"
-
-#~ msgid "Devices"
-#~ msgstr "デバイス"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "ローカルネットワークの為の逆引きを転送しません"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "TFTPサーバーを有効にする"
-
-#~ msgid "Errors"
-#~ msgstr "エラー"
-
-#~ msgid "Essentials"
-#~ msgstr "簡易設定"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "ホスト名展開"
-
-#~ msgid "First leased address"
-#~ msgstr "先頭リースアドレス"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-
-#~ msgid "Hardware Address"
-#~ msgstr "ハードウェアアドレス"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "ここではインストールされた無線デバイスの設定を行うことが出来ます。"
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "<code>/etc/hosts</code>を無視"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "アドホック"
-
-#~ msgid "Internet Connection"
-#~ msgstr "インターネット接続"
-
-#~ msgid "Join (Client)"
-#~ msgstr "クライアント"
-
-#~ msgid "Leases"
-#~ msgstr "リース"
-
-#~ msgid "Local Domain"
-#~ msgstr "ローカルドメイン"
-
-#~ msgid "Local Network"
-#~ msgstr "ローカルネットワーク"
-
-#~ msgid "Local Server"
-#~ msgstr "ローカルサーバー"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "ネットワークブートイメージ"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "ネットワーク名(<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "リースアドレス数"
-
-#~ msgid "Path"
-#~ msgstr "パス"
-
-#~ msgid "Perform Actions"
-#~ msgstr "実行"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "クライアント同士の通信を制限します"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "アクセスポイント"
-
-#~ msgid "Resolvfile"
-#~ msgstr "リゾルバファイル"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "TFTPサーバールート"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "以下の変更が適用されました"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> によって新しい"
-#~ "ファームウェアを書き込んだ時に、これらのファイルは新しいファームウェアイン"
-#~ "ストールでも追加されます。"
-
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "無線アダプタ"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> によって"
-#~ "ネットワークメンバは自動的にネットワーク設定(<abbr title=\"Internet "
-#~ "Protocol\">IP</abbr>アドレス、netmask, <abbr title=\"Domain Name System"
-#~ "\">DNS</abbr>サーバー、...)を受信します。"
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "1つのデバイスで複数の無線ネットワークを運用することが出来ます。特定のハー"
-#~ "ドウェアとドライバの仕様の制限が在ることに注意してください。通常では1つの"
-#~ "アドホックモード、もしくは3つまでのマスターモードと1つのクライアントモード"
-#~ "ネットワークを同時に稼働できます。"
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "PPPoE をサポートする為には \"ppp-mod-pppoe\" を、PPtP をサポートする為に "
-#~ "\"pptp\" をインストールする必要があります。"
-
-#~ msgid "additional hostfile"
-#~ msgstr "追加のホストファイル"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "リゾルバファイルのホストエントリにドメイン名を追加します"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "static"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "自動再接続"
-
-#~ msgid "concurrent queries"
-#~ msgstr "並列問い合わせ"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "このインターフェースで <abbr title=\"Dynamic Host Configuration Protocol"
-#~ "\">DHCP</abbr> を無効にします。"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "disconnect when idle for"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "ネガティブキャッシュを行わない"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "Windowsシステムの無駄な <abbr title=\"Domain Name System\">DNS</abbr>クエ"
-#~ "リをフィルタします"
-
-#~ msgid "installed"
-#~ msgstr "インストール済み"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "サブネットに依存したホスト名をローカライズします"
-
-#~ msgid "not installed"
-#~ msgstr "未インストール"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "ネガティブキャッシュの<abbr title=\"Domain Name System\">DNS</abbr>応答を"
-#~ "防ぎます"
-
-#~ msgid "query port"
-#~ msgstr "問い合わせポート"
-
-#~ msgid "transmitted / received"
-#~ msgstr "送信 / 受信"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "ネットワーク"
-
-#~ msgid "all"
-#~ msgstr "全て"
-
-#~ msgid "Code"
-#~ msgstr "コード"
-
-#~ msgid "Distance"
-#~ msgstr "Distance"
-
-#~ msgid "Legend"
-#~ msgstr "Legend"
-
-#~ msgid "Library"
-#~ msgstr "Library"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "see &#39;%s&#39; manpage"
-
-#~ msgid "Package Manager"
-#~ msgstr "パッケージ管理"
-
-#~ msgid "Service"
-#~ msgstr "サービス"
-
-#~ msgid "Statistics"
-#~ msgstr "統計"
-
-#~ msgid "zone"
-#~ msgstr "ゾーン"
diff --git a/po/ja/commands.po b/po/ja/commands.po
deleted file mode 100644
index 4132274..0000000
--- a/po/ja/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/ja/coovachilli.po b/po/ja/coovachilli.po
deleted file mode 100644
index 9415712..0000000
--- a/po/ja/coovachilli.po
+++ /dev/null
@@ -1,25 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "CoovaChilli"
-msgstr ""
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
diff --git a/po/ja/ddns.po b/po/ja/ddns.po
deleted file mode 100644
index 68b5392..0000000
--- a/po/ja/ddns.po
+++ /dev/null
@@ -1,89 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-04-22 17:38+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Check for changed IP every"
-msgstr "IPアドレスが変化したかチェックを行う間隔"
-
-msgid "Check-time unit"
-msgstr "チェックの時間単位"
-
-msgid "Custom update-URL"
-msgstr "手動アップデート-URL"
-
-msgid "Dynamic DNS"
-msgstr "ダイナミックDNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"ダイナミックDNSを使用することで、IPアドレスが変更されても固定のホスト名を使っ"
-"てルーターにアクセスすることができます。"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "強制的にアップデートを行う間隔"
-
-msgid "Force-time unit"
-msgstr "アップデートの時間単位"
-
-msgid "Hostname"
-msgstr "ホスト名"
-
-msgid "Interface"
-msgstr "インターフェース"
-
-msgid "Network"
-msgstr "ネットワーク"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr "パスワード"
-
-msgid "Service"
-msgstr "サービス"
-
-msgid "Source of IP address"
-msgstr "送信元IPアドレス"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "ユーザー名"
-
-msgid "custom"
-msgstr "手動設定"
-
-# Hours
-msgid "h"
-msgstr "時"
-
-msgid "interface"
-msgstr "インターフェース"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "分"
-
-msgid "network"
-msgstr "ネットワーク"
diff --git a/po/ja/diag_core.po b/po/ja/diag_core.po
deleted file mode 100644
index f67657f..0000000
--- a/po/ja/diag_core.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 14:36+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configure Diagnostics"
-msgstr "診断機能設定"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/ja/diag_devinfo.po b/po/ja/diag_devinfo.po
deleted file mode 100644
index 1ef3dad..0000000
--- a/po/ja/diag_devinfo.po
+++ /dev/null
@@ -1,209 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-19 07:59+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr "追加"
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr "設定"
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr "削除"
-
-msgid "Device Scan Config"
-msgstr "デバイススキャン設定"
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr ""
-
-msgid "Devices on Network"
-msgstr "ネットワーク上のデバイス"
-
-msgid "Edit"
-msgstr "編集"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr "IPアドレス"
-
-msgid "Interface"
-msgstr "インターフェース"
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "MACアドレス"
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "リクエスト間のスリープ時間 (単位:ミリ秒, 標準設定:100)"
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr "SIPデバイスは見つかりませんでした。"
-
-msgid "No devices detected"
-msgstr "デバイスは検出されませんでした。"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "リクエスト送信回数 (標準設定:1)"
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr "電話"
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr "リピート回数"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr "SIPデバイス情報"
-
-msgid "SIP Device Scan"
-msgstr "SIPデバイスのスキャン"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "SIPデバイススキャン設定"
-
-msgid "SIP Devices on Network"
-msgstr "ネットワーク上のSIPデバイス"
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr "リクエスト間のスリープ時間"
-
-msgid "Subnet"
-msgstr "サブネット"
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "応答待ち時間 (単位:秒, 標準設定:10)"
-
-msgid "Timeout"
-msgstr "タイムアウト"
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/ja/ffwizard.po b/po/ja/ffwizard.po
deleted file mode 100644
index 408745d..0000000
--- a/po/ja/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/ja/firewall.po b/po/ja/firewall.po
deleted file mode 100644
index 0739c2f..0000000
--- a/po/ja/firewall.po
+++ /dev/null
@@ -1,683 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-11-14 17:32+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr "%s%s ,%s"
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr "(名前設定の無いエントリー)"
-
-msgid "(Unnamed Rule)"
-msgstr "(名前設定の無いルール)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(名前設定の無いSNAT)"
-
-msgid "-- Please choose --"
-msgstr "-- 選択してください --"
-
-msgid "-- custom --"
-msgstr "-- 手動設定 --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> パケット / <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-"<var>%d</var> パケット / <var>%s</var>, バースト <var>%d</var> パケット"
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var>, %s を上限に設定"
-
-msgid "Action"
-msgstr "動作"
-
-msgid "Add"
-msgstr "追加"
-
-msgid "Add and edit..."
-msgstr "追加及び編集..."
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "<em>送信元ゾーン</em>からの転送を許可する:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "<em>宛先ゾーン</em>への転送を許可する:"
-
-msgid "Any"
-msgstr "全て"
-
-msgid "Covered networks"
-msgstr "対象ネットワーク"
-
-msgid "Custom Rules"
-msgstr "手動設定ルール"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"手動設定ルールの設定では、ファイアウォールの設定画面ではサポートされていない"
-"ような、任意のiptablesコマンドを実行することが可能です。これらの任意のコマン"
-"ドは、ファイアウォール機能の起動ごとに、標準のルールが読み込まれた後に実行さ"
-"れます。"
-
-msgid "Destination IP address"
-msgstr "宛先IPアドレス"
-
-msgid "Destination address"
-msgstr "宛先アドレス"
-
-msgid "Destination port"
-msgstr "宛先ポート"
-
-msgid "Destination zone"
-msgstr "宛先ゾーン"
-
-msgid "Do not rewrite"
-msgstr "リライトしない"
-
-msgid "Drop invalid packets"
-msgstr "無効なパケットを遮断する"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "Enable NAT Loopback"
-msgstr "NATループバックを有効にする"
-
-msgid "Enable SYN-flood protection"
-msgstr "SYN-Floodプロテクションを有効にする"
-
-msgid "Enable logging on this zone"
-msgstr "このゾーンのログ記録を有効にする"
-
-msgid "External IP address"
-msgstr "外部IPアドレス"
-
-msgid "External port"
-msgstr "外部ポート"
-
-msgid "External zone"
-msgstr "外部ゾーン"
-
-msgid "Extra arguments"
-msgstr "追加設定"
-
-msgid "Firewall"
-msgstr "ファイアウォール"
-
-msgid "Firewall - Custom Rules"
-msgstr "ファイアウォール - 手動設定ルール"
-
-msgid "Firewall - Port Forwards"
-msgstr "ファイアウォール - ポートフォワーディング"
-
-msgid "Firewall - Traffic Rules"
-msgstr "ファイアウォール - トラフィック・ルール"
-
-msgid "Firewall - Zone Settings"
-msgstr "ファイアウォール - ゾーン設定"
-
-msgid "Force connection tracking"
-msgstr "強制的にコネクション追跡を行う"
-
-msgid "Forward"
-msgstr "転送"
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr "送信元 %s (%s)"
-
-msgid "From %s in %s with source %s"
-msgstr "送信元 %s (%s) , 送信元 %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "送信元 %s (%s) , 送信元 %s, 送信元 %s"
-
-msgid "General Settings"
-msgstr "一般設定"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4及びIPv6"
-
-msgid "IPv4 only"
-msgstr "IPv4のみ"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "IPv6のみ"
-
-msgid "Input"
-msgstr "受信"
-
-msgid "Inter-Zone Forwarding"
-msgstr "内部ゾーン転送"
-
-msgid "Internal IP address"
-msgstr "内部IPアドレス"
-
-msgid "Internal port"
-msgstr "内部ポート"
-
-msgid "Internal zone"
-msgstr "内部ゾーン"
-
-msgid "Limit log messages"
-msgstr "ログメッセージを制限"
-
-msgid "MSS clamping"
-msgstr "MSSクランプ"
-
-msgid "Masquerading"
-msgstr "マスカレード"
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr "ICMPタイプの一致"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-"設定された宛先ポート(またはポート範囲)に一致した転送トラフィックが対象になり"
-"ます"
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"設定された宛先ポート(またはポート範囲)に一致した受信トラフィックが対象になり"
-"ます"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"設定されたクライアントホストの送信元ポート(またはポート範囲)からの受信トラ"
-"フィックと一致したトラフィックが対象になります。"
-
-msgid "Name"
-msgstr "名前"
-
-msgid "New SNAT rule"
-msgstr "SNATルールの新規作成"
-
-msgid "New forward rule"
-msgstr "転送ルールの新規作成"
-
-msgid "New input rule"
-msgstr "受信ルールの新規作成"
-
-msgid "New port forward"
-msgstr "転送設定の新規作成"
-
-msgid "New source NAT"
-msgstr "SNATルールの新規作成"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "設定された宛先IPアドレスと一致した受信トラフィックが対象になります。"
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "設定されたMACアドレスと一致した受信したトラフィックが対象になります。"
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-"設定されたIPアドレス (または範囲) と一致した受信したトラフィックが対象になり"
-"ます。"
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"設定されたクライアントホストの送信元ポート(またはポート範囲)からの受信トラ"
-"フィックと一致したトラフィックのみを対象にします。"
-
-msgid "Open ports on router"
-msgstr "ポートの開放"
-
-msgid "Other..."
-msgstr "その他のプロトコル"
-
-msgid "Output"
-msgstr "送信"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-"iptablesにパススルーする追加の引数を設定してください。ただし、注意して設定し"
-"てください!"
-
-msgid "Port Forwards"
-msgstr "ポートフォワーディング"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"ポートフォワーディングは、インターネット上のリモートコンピュータから、プライ"
-"ベートなネットワーク上の、特定のコンピュータやサービスへのアクセスを可能にし"
-"ます。"
-
-msgid "Protocol"
-msgstr "プロトコル"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"ルールに一致した受信トラフィックを、内部ホストの設定されたポートへ転送します"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "ルールに一致した受信トラフィックを、設定された内部ホストへ転送します"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "設定された宛先サブネットへのマスカレードを制限する"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "設定された送信元サブネットへのマスカレードを制限する"
-
-msgid "Restrict to address family"
-msgstr "アドレスファミリの制限"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-"ルールに一致したトラフィックの送信元アドレスを設定した値にリライトします。"
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"ルールに一致したトラフィックの送信元ポートを設定した値にリライトします。空欄"
-"にした場合、IPアドレスのみを書き直します。"
-
-msgid "Rewrite to source %s"
-msgstr "送信元 %s にリライト"
-
-msgid "Rewrite to source %s, %s"
-msgstr "送信元 %s, %s にリライト"
-
-msgid "SNAT IP address"
-msgstr "SNAT IPアドレス"
-
-msgid "SNAT port"
-msgstr "SNAT ポート"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Traffic Redirection"
-# msgstr ""
-#
-# msgid ""
-# "Traffic redirection allows you to change the destination address of "
-# "forwarded packets."
-# msgstr ""
-#
-# msgid "Overview"
-# msgstr ""
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "Source zone"
-# msgstr ""
-#
-# msgid "Source MAC-address"
-# msgstr ""
-#
-# msgid "Source port"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-msgid "Source IP address"
-msgstr "送信元IPアドレス"
-
-msgid "Source MAC address"
-msgstr "送信元MACアドレス"
-
-msgid "Source NAT"
-msgstr "送信元NAT"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"送信元NAT設定は、複数のWANアドレスを内部のサブネットにマッピングするような、"
-"出力トラフィックに対する送信元IPアドレスのきめ細かい制御を行うマスカレードの"
-"設定フォームです。"
-
-msgid "Source address"
-msgstr "送信元アドレス"
-
-msgid "Source port"
-msgstr "送信元ポート"
-
-msgid "Source zone"
-msgstr "送信元ゾーン"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"ファイアウォール機能は、各ネットワークインターフェース上にゾーンを作成してト"
-"ラフィックの制御を行います。"
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"下記の設定は、このゾーン (%s)とその他のゾーン間の転送ポリシーを制御します。"
-"<em>宛先ゾーンへの転送</em> は、<strong>%q から</strong>転送されたトラフィッ"
-"クに対して転送を許可します。 <em>送信元ゾーンからの転送</em> は、別のゾーンか"
-"ら<strong>%qへ</strong> の転送を許可します。トラフィック転送設定は、<em>一方"
-"向</em>であり、例えばlanからwanへの転送設定は、wanからlanへの転送を<em>許可し"
-"ません。</em>"
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"このページでは、各転送ルールの詳細設定を行うことができます。ただし、ほとんど"
-"のケースは、これらの設定を変更する必要はありません。"
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"このページでは、各トラフィックルールの送信元・宛先ホストの設定などの詳細設定"
-"を行うことができます。"
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"このセクションでは、%sの標準的な動作を設定します。<em>受信</em>及び<em>送信</"
-"em>オプションは、このゾーンに対して入出力するトラフィックに対する標準のポリ"
-"シーを設定し、<em>転送</em>オプションは、ゾーン間の転送トラフィックに対する標"
-"準のポリシーになります。<em>対象ネットワーク</em>は、どのネットワーク設定がこ"
-"のゾーンに属するかを設定します。"
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "宛先 %s, %s (<var>デバイス</var>)"
-
-msgid "To %s in %s"
-msgstr "宛先 %s (%s)"
-
-msgid "To %s on <var>this device</var>"
-msgstr "宛先 %s (<var>デバイス</var>)"
-
-msgid "To %s, %s in %s"
-msgstr "宛先 %s, %s (%s)"
-
-msgid "To source IP"
-msgstr "変換後送信元IP"
-
-msgid "To source port"
-msgstr "変換後送信元ポート"
-
-msgid "Traffic Rules"
-msgstr "トラフィック・ルール"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"トラフィック・ルールの設定では、ゾーン間を行き来するパケットのポリシーを設定"
-"します。例えば、特定のホスト間や、ルーターのWANポートへのトラフィックの拒否を"
-"設定することができます。"
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"\"-- 手動設定 --\"を選択し、プロトコルをスペースで区切って入力することで複数"
-"のプロトコルを指定することができます。"
-
-msgid "Zone %q"
-msgstr "ゾーン %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "ゾーン ⇒ 転送"
-
-msgid "Zones"
-msgstr "ゾーン"
-
-msgid "accept"
-msgstr "許可"
-
-msgid "any"
-msgstr "全て"
-
-msgid "any host"
-msgstr "全てのホスト"
-
-msgid "any router IP"
-msgstr "全てのルーターIP"
-
-msgid "any zone"
-msgstr "全てのゾーン"
-
-msgid "don't track"
-msgstr "コネクション追跡を行わない"
-
-msgid "drop"
-msgstr "遮断"
-
-msgid "reject"
-msgstr "拒否"
-
-#~ msgid "Destination"
-#~ msgstr "宛先"
-
-#~ msgid "Family"
-#~ msgstr "アドレスファミリ"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "転送先 %s (%s)"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "転送先 %s, %s (%s)"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "送信元"
-
-#~ msgid "To %s"
-#~ msgstr "宛先 %s"
-
-#~ msgid "To %s at %s"
-#~ msgstr "宛先 %s, %s"
-
-#~ msgid "Via"
-#~ msgstr "経由"
-
-#~ msgid "Accept forward"
-#~ msgstr "転送を許可"
-
-#~ msgid "Accept input"
-#~ msgstr "受信を許可"
-
-#~ msgid "Disable"
-#~ msgstr "無効"
-
-#~ msgid "Discard forward"
-#~ msgstr "転送を破棄"
-
-#~ msgid "Discard input"
-#~ msgstr "入力を破棄"
-
-#~ msgid "Do not track forward"
-#~ msgstr "転送の追跡を行わない"
-
-#~ msgid "Do not track input"
-#~ msgstr "入力の追跡を行わない"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "IPレンジ"
-
-#~ msgid "IPs"
-#~ msgstr "IP"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MACs"
-#~ msgstr "MAC"
-
-#~ msgid "Refuse forward"
-#~ msgstr "転送を拒否"
-
-#~ msgid "Refuse input"
-#~ msgstr "受信を拒否"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "ルール設定は無効になっています"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "ルール設定は有効になっています"
-
-#~ msgid "day"
-#~ msgstr "日"
-
-#~ msgid "hour"
-#~ msgstr "時"
-
-#~ msgid "minute"
-#~ msgstr "分"
-
-#~ msgid "not"
-#~ msgstr "not"
-
-#~ msgid "port"
-#~ msgstr "ポート"
-
-#~ msgid "ports"
-#~ msgstr "ポート"
-
-#~ msgid "second"
-#~ msgstr "秒"
-
-#~ msgid "type"
-#~ msgstr "タイプ"
-
-#~ msgid "types"
-#~ msgstr "タイプ"
-
-#~ msgid "(optional)"
-#~ msgstr "(オプション)"
-
-#~ msgid "Intended destination address"
-#~ msgstr "意図された宛先アドレス"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "内部ポート（オプション）"
-
-#~ msgid "Advanced Options"
-#~ msgstr "詳細なオプション"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "詳細なルール"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "詳細なルール設定を行うことができます。ただし、すでに接続が行われているパ"
-#~ "ケットに関しては、自動的にファイアウォールの通過を許可されます。"
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "手動設定ルール (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "デバイス"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "DNATの場合、設定された宛先アドレスのトラフィックに対して合致を行います。"
-#~ "SNATの場合、送信元アドレスを設定されたアドレスで上書きします。"
-
-#~ msgid "Overview"
-#~ msgstr "概要"
-
-#~ msgid "Port forwarding"
-#~ msgstr "ポートフォワーディング"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "ポートフォワーディングを使用することで、内部ネットワークのサービスを外部に"
-#~ "提供することができます。"
-
-#~ msgid "Redirection type"
-#~ msgstr "転送タイプ"
-
-#~ msgid "Redirections"
-#~ msgstr "転送"
-
-#~ msgid "Rules"
-#~ msgstr "ルール"
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "トラフィック転送"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "トラフィック転送機能を用いることで、転送したパケットの宛先アドレスを変更す"
-#~ "ることが可能です。"
diff --git a/po/ja/freifunk-policyrouting.po b/po/ja/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/ja/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/ja/freifunk.po b/po/ja/freifunk.po
deleted file mode 100644
index d69b1f1..0000000
--- a/po/ja/freifunk.po
+++ /dev/null
@@ -1,389 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/ja/hd_idle.po b/po/ja/hd_idle.po
deleted file mode 100644
index 0ec9d68..0000000
--- a/po/ja/hd_idle.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-11-14 14:40+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "ディスク"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "Enable debug"
-msgstr "デバッグを有効にする"
-
-msgid "Idle-time"
-msgstr "アイドル時間"
-
-msgid "Idle-time unit"
-msgstr "アイドル時間 (単位)"
-
-msgid "Settings"
-msgstr "設定"
-
-# Hours
-msgid "h"
-msgstr "時"
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idleはアイドル時に外部ディスクをスピンダウンさせるための、ユーティリティプ"
-"ログラムです。"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "分"
diff --git a/po/ja/meshwizard.po b/po/ja/meshwizard.po
deleted file mode 100644
index 180d771..0000000
--- a/po/ja/meshwizard.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/ja/minidlna.po b/po/ja/minidlna.po
deleted file mode 100644
index 4cfc338..0000000
--- a/po/ja/minidlna.po
+++ /dev/null
@@ -1,198 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-10 09:10+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Album art names:"
-msgstr "アルバムアートワーク・ファイル名:"
-
-msgid "Announced model number:"
-msgstr "通知するモデル番号:"
-
-msgid "Announced serial number:"
-msgstr "通知するシリアルナンバー:"
-
-msgid "Browse directory"
-msgstr "Browse directory"
-
-msgid "Collecting data..."
-msgstr "データ収集中です..."
-
-msgid "Database directory:"
-msgstr "データベース・ディレクトリ:"
-
-msgid "Enable TIVO:"
-msgstr "TIVO を有効にする:"
-
-msgid "Enable inotify:"
-msgstr "inotify を有効にする:"
-
-msgid "Enable:"
-msgstr "サービスを有効にする:"
-
-msgid "Friendly name:"
-msgstr "Friendly名:"
-
-msgid "General Settings"
-msgstr "基本設定"
-
-msgid "Interfaces:"
-msgstr "インターフェース:"
-
-msgid "Log directory:"
-msgstr "ログディレクトリ:"
-
-msgid "Media directories:"
-msgstr "メディアディレクトリ:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNAは、DLNA/UPnP-AVクライアントの完全互換を目的としたサーバー・ソフト"
-"ウェアです。"
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr "miniDLNAがクライアントに通知するXML中のモデル番号を設定します。"
-
-msgid "Music"
-msgstr "ミュージック"
-
-msgid "Network interfaces to serve."
-msgstr "サービスが使用するネットワーク・インターフェースを設定します。"
-
-msgid "Notify interval in seconds."
-msgstr "通知間隔を秒単位で設定します。"
-
-msgid "Notify interval:"
-msgstr "通知間隔:"
-
-msgid "Pictures"
-msgstr "ピクチャ"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "ステータス表示のためのHTTPポート番号を設定してください。"
-
-msgid "Port:"
-msgstr "ポート:"
-
-msgid "Presentation URL:"
-msgstr "プレゼンテーションURL:"
-
-msgid "Root container:"
-msgstr "ルート・コンテナ:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr "miniDLNAがクライアントに通知するXML中のシリアルナンバーを設定します。"
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr "クライアント上で表示されるUPnPノード名を設定してください。"
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"miniDLNAが使用するデータベースおよびアルバムアートのキャッシュを保存するディ"
-"レクトリパスを設定してください。"
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr "miniDLNAが書きだすログファイルのディレクトリパスを設定してください。"
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"inotifyを使用した新規ファイルの自動検知を有効にする場合、このオプションを有効"
-"にしてください。"
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"TiVoサポートのための.jpgおよび.mp3ファイルのストリーミングを行う場合、このオ"
-"プションを有効にしてください。"
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"DLNA規格を厳守する場合、このオプションを有効にしてください。オプションを有効"
-"にすると、サーバー側で、大きいサイズのJPEGファイルのダウンスケールを行いま"
-"す。しかし、この機能はSonyなどのDLNA製品において、JPEGサービスのパフォーマン"
-"スを損なう可能性があります。"
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"miniDLNA がスキャンするディレクトリを設定します。ディレクトリを特定のコンテン"
-"ツに制限したい場合、タイプをパスのはじめに付け、コンマ記号で区切ることで設定"
-"できます ('A'=オーディオ \"audio\", 'V'=ビデオ \"video\", 'P'=写真 \"images"
-"\", 例: media_dir=A,/mnt/media/Music)。また、このオプションは複数のディレクト"
-"リを登録可能です。"
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "MiniSSDPd ソケットのパスを設定してください。"
-
-msgid "Standard container"
-msgstr "標準コンテナ"
-
-msgid "Strict to DLNA standard:"
-msgstr "DLNA規格の厳守:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"miniDLNA サービスは稼働中です。%d 個の音楽ファイル , %d 個のビデオファイル, %"
-"d 個の写真ファイルを認識しています。"
-
-msgid "The miniDLNA service is not running."
-msgstr "miniDLNA サービスは稼働していません。"
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr "アルバムアート検索時にチェックするファイル名のリストを設定します。"
-
-msgid "Video"
-msgstr "ビデオ"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "miniDLNA ステータス"
-
-msgid "miniSSDP socket:"
-msgstr "miniSSDP ソケット:"
-
-#~ msgid "Network interfaces to serve, comma delimited list."
-#~ msgstr ""
-#~ "サービスが使用するネットワーク・インターフェースを設定します。カンマ記号 "
-#~ "\",\" で区切ってください。"
-
-#~ msgid ""
-#~ "This is a list of file names to check for when searching for album art. "
-#~ "Note: names must be delimited with a forward slash '/'"
-#~ msgstr ""
-#~ "アルバムアート検索時にチェックするファイル名のリストを設定します。注意: "
-#~ "ファイル名はスラッシュ記号 '/' で区切ってください。"
diff --git a/po/ja/mmc_over_gpio.po b/po/ja/mmc_over_gpio.po
deleted file mode 100644
index bd43e48..0000000
--- a/po/ja/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-08-19 05:35+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "設定"
diff --git a/po/ja/multiwan.po b/po/ja/multiwan.po
deleted file mode 100644
index 6f040bf..0000000
--- a/po/ja/multiwan.po
+++ /dev/null
@@ -1,120 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-05 14:02+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr "自動"
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr "DNSサーバー"
-
-msgid "Default Route"
-msgstr "デフォルトルート"
-
-msgid "Destination Address"
-msgstr "宛先アドレス"
-
-msgid "Disable"
-msgstr "無効"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "ヘルスモニタ ICMP宛先"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "ヘルスモニタ ICMP タイムアウト"
-
-msgid "Health Monitor Interval"
-msgstr "ヘルスモニタ更新間隔"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr "ヘルスモニタは、ネットワークの変更及び接続失敗の検出と調整を行います。"
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr "ロードバランサ ディストリビューション"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "ロードバランサ (互換性)"
-
-msgid "Load Balancer(Performance)"
-msgstr "ロードバランサ (パフォーマンス)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Multi-WAN トラフィック・ルール"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Multi-WANを用いることで、複数の上りリンクを使用してロードバランサとフェイル"
-"オーバー機能を使用することができます。"
-
-msgid "None"
-msgstr "なし"
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr "ポート"
-
-msgid "Protocol"
-msgstr "プロトコル"
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr "送信元アドレス"
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr "WAN インターフェースリスト"
-
-msgid "WAN Uplink"
-msgstr "WAN アップリンク"
-
-msgid "all"
-msgstr "全て"
diff --git a/po/ja/ntpc.po b/po/ja/ntpc.po
deleted file mode 100644
index bb6135c..0000000
--- a/po/ja/ntpc.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-11-14 14:41+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "時刻調整"
-
-msgid "Count of time measurements"
-msgstr "時間計測回数"
-
-msgid "Current system time"
-msgstr "現在時刻"
-
-msgid "General"
-msgstr "一般設定"
-
-msgid "Hostname"
-msgstr "ホスト名"
-
-msgid "Offset frequency"
-msgstr "オフセット周波数"
-
-msgid "Port"
-msgstr "ポート"
-
-msgid "Synchronizes the system time"
-msgstr "システムの時間を同期します。"
-
-msgid "Time Server"
-msgstr "時刻サーバー"
-
-msgid "Time Servers"
-msgstr "時刻サーバー"
-
-msgid "Time Synchronisation"
-msgstr "Time Synchronisation"
-
-msgid "Update interval (in seconds)"
-msgstr "アップデート間隔 (秒)"
-
-msgid "empty = infinite"
-msgstr "空の場合、無限大になります"
diff --git a/po/ja/olsr.po b/po/ja/olsr.po
deleted file mode 100644
index 3c36225..0000000
--- a/po/ja/olsr.po
+++ /dev/null
@@ -1,670 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-11-14 14:40+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Active MID announcements"
-msgstr "アクティブなMID(Multi Interface Declaration) 通知"
-
-msgid "Active OLSR nodes"
-msgstr "アクティブなOLSRノード"
-
-msgid "Active host net announcements"
-msgstr "アクティブなホストネットワーク通知"
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Allow gateways with NAT"
-msgstr "NATを使用するゲートウェイを選択可能にする"
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr "NATを介してパケットを送信するIPv4 ゲートウェイを選択可能にします"
-
-msgid "Announce uplink"
-msgstr "通知するアップリンク"
-
-msgid "Announced network"
-msgstr "通知ネットワーク"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr "どちらの値もドット付き十進数の形式で入力してください。"
-
-msgid "Broadcast address"
-msgstr "ブロードキャストアドレス"
-
-msgid "Configuration"
-msgstr "設定"
-
-msgid "Device"
-msgstr "デバイス"
-
-msgid "Display"
-msgstr "ディスプレイ"
-
-msgid "Downlink"
-msgstr "ダウンリンク"
-
-msgid "Download Config"
-msgstr "設定ダウンロード"
-
-msgid "ETX"
-msgstr "ETX"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-"スマートゲートウェイを有効にします。無効の場合、その他全てのスマートゲート"
-"ウェイの設定値は無視されます。標準設定は\"無効\"です。"
-
-msgid "Enable this interface."
-msgstr "このインターフェースを有効にします。"
-
-msgid "Enabled"
-msgstr "有効"
-
-msgid "Expected retransmission count"
-msgstr "再送数の期待値"
-
-msgid "FIB metric"
-msgstr "FIB メトリック"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-"FIB メトリックは、OLSRdが設定するホスト経路のメトリック値をコントロールしま"
-"す。\"flat\"を選択した場合、メトリック値は常に\"2\"となります。この設定は、"
-"Linuxカーネルが古い経路を消去するのに有効なため、好ましい設定です。\"correct"
-"\"はホップ数をメトリック値として使用します。\"approx\"も同様にホップ数をメト"
-"リック値として使用しますが、次ホップが変更した場合のみ更新を行います。標準設"
-"定は\"flat\"です。"
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr "TCsのfisheyeメカニズムを使用します。標準設定は\"有効\"です。"
-
-msgid "Gateway"
-msgstr "ゲートウェイ"
-
-msgid "General Settings"
-msgstr "一般設定"
-
-msgid "General settings"
-msgstr "一般設定"
-
-msgid "HNA"
-msgstr "HNA"
-
-msgid "HNA Announcements"
-msgstr "HNA 通知"
-
-msgid "HNA interval"
-msgstr "HNA 送信間隔"
-
-msgid "HNA validity time"
-msgstr "HNA 有効時間"
-
-msgid "Hello"
-msgstr "Hello"
-
-msgid "Hello interval"
-msgstr "Hello 送信間隔"
-
-msgid "Hello validity time"
-msgstr "Hello 有効時間"
-
-msgid "Hna4"
-msgstr "Hna4"
-
-msgid "Hna6"
-msgstr "Hna6"
-
-msgid "Hops"
-msgstr "ホップ"
-
-msgid "Hostname"
-msgstr "ホスト名"
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-"リンク検出に対するヒステリシスを設定します (ホップ数メトリックの場合のみ有"
-"効)。ヒステリシスはリンク検出に対するロバスト性を向上させますが、隣接ノードの"
-"登録が遅くなります。標準設定は\"有効\"です。"
-
-msgid "IP Addresses"
-msgstr "IPアドレス"
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-"使用するIPプロトコルバージョンを指定します。6and4が選択された場合、各プロトコ"
-"ルに対して1つづつOLSRdインスタンスが起動します。"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 broadcast"
-msgstr "IPv4 ブロードキャスト"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-"送信するOLSRパケットのIPv4ブロードキャストアドレスです。便利な一例として、"
-"255.255.255.255が挙げられます。標準設定は\"0.0.0.0\"であり、インターフェース"
-"のブロードキャストIPを使用します。"
-
-msgid "IPv4 source"
-msgstr "IPv4 送信元"
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-"送信するOLSRパケットのIPv4送信元アドレスです。標準設定は\"0.0.0.0\"であり、イ"
-"ンターフェースのIPを使用します。"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 multicast"
-msgstr "IPv6 マルチキャスト"
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-"IPv6 マルチキャストアドレスを設定します。標準はMANETルーターが使用するリンク"
-"ローカル・マルチキャストである\"FF02::6D\"です。"
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-"IPv6 ネットワークアドレスは省略せずに入力してください。プレフィクスはCIDR形式"
-"で入力してください。"
-
-msgid "IPv6 source"
-msgstr "IPv6 送信元"
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-"IPv6送信元プレフィクスを設定します。OLSRdはインターフェースの中から、このプレ"
-"フィクス値に一致するものを選択します。標準設定は\"0::/0\"であり、リンクローカ"
-"ルIPでないインターフェースIPを使用します。"
-
-msgid "IPv6-Prefix of the uplink"
-msgstr "アップリンクIPv6 プレフィクス"
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-"現在のゲートウェイへの経路が変わる場合、このゲートウェイのETX値は新しい値と比"
-"較される前に、このパラメータの値と乗算されます。パラメータは0.1から1.0の間で"
-"設定可能です。ただし、変更する場合、1.0に近い値を設定する事をお薦めします。"
-"<br /><b>警告:</b>このパラメータはetx_ffeth メトリックと同時に使用しないでく"
-"ださい!<br />標準設定は\"1.0\"です。"
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-"このノードがNATを使用してインターネットに接続する場合、有効にしてください。標"
-"準設定は\"有効\"です。"
-
-msgid "Interface"
-msgstr "インターフェース"
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-"インターフェースモードは、スイッチ上のイーサネットインターフェースに不必要な"
-"パケットの送信を抑制するために使用します。有効なモードは\"mesh\"及び\"ether"
-"\"です。標準設定は\"mesh\"です。"
-
-msgid "Interfaces"
-msgstr "インターフェース"
-
-msgid "Interfaces Defaults"
-msgstr "インターフェース デフォルト設定"
-
-msgid "Internet protocol"
-msgstr "インターネットプロトコル"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-"ネットワーク・インターフェースの設定が変更されたかをチェックするポーリング間"
-"隔を秒単位で設定します。標準設定は\"2.5\"です。"
-
-msgid "Known OLSR routes"
-msgstr "OLSR ルーティング"
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr "LQ エイジング"
-
-msgid "LQ algorithm"
-msgstr "LQ アルゴリズム"
-
-msgid "LQ fisheye"
-msgstr "LQ fisheye"
-
-msgid "LQ level"
-msgstr "LQ レベル"
-
-msgid "Last hop"
-msgstr "最終ホップ"
-
-msgid "Legend"
-msgstr "凡例"
-
-msgid "Library"
-msgstr "ライブラリ"
-
-msgid "Link Quality Settings"
-msgstr "リンク品質 (LQ) 設定"
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-"リンク品質 (LQ) のエイジング要素の設定を行います (LQ レベルが2の場合のみ有"
-"効)。etx_float及びetx_fpmの値の調整を行います。値が小さくなると、ETX値の変化"
-"が遅くなります。設定可能な値は0.01-1.0です。"
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-"リンク品質 (LQ) アルゴリズムを設定します (LQ レベルが2の場合のみ有効)。<br /"
-"><b>etx_float</b>: 浮動小数点演算＋指数関数エイジング<br /><b>etx_fpm</b> : "
-"etx_floatと同様、ただし整数値演算を行います<br /><b>etx_ff</b> : ETX "
-"freifunk, ETXの変形版であり、ETX算出のためにHelloパケットだけでなく全てのOLSR"
-"トラフィックを使用します<br /><b>etx_ffeth</b>: etx_ffと互換性のない変形版で"
-"す。イーサネットのリンクにETX 0.1を設定することができます<br />標準設定は"
-"\"etx_ff\"です。"
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-"リンク品質(LQ) レベルの設定では、ホップ数ベースまたはコストベース(ETX) のどち"
-"らかにルーティング方法を切り替えます。<br /><b>0</b> = リンク品質を加味しない"
-"<br /><b>2</b> = MPR集合及びルーティングにリンク品質を加味する<br />標準設定"
-"は\"2\"です。"
-
-msgid "LinkQuality Multiplicator"
-msgstr "リンク品質 (LQ) マルチプリケーター"
-
-msgid "Links per node (average)"
-msgstr "ノードあたりのリンク数 (平均)"
-
-msgid "Links total"
-msgstr "リンク数の合計"
-
-msgid "Local interface IP"
-msgstr "ローカルインターフェース IP"
-
-msgid "MID"
-msgstr "MID"
-
-msgid "MID interval"
-msgstr "MID 送信間隔"
-
-msgid "MID validity time"
-msgstr "MID 有効時間"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Main IP"
-msgstr "メインIP"
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"OLSRdが稼働中であること、\"txinfo\"プラグインがロードされていること、ポート"
-"2006番が設定されていること、\"127.0.0.1\"からの接続が許可されていることを確認"
-"してください。"
-
-msgid "Metric"
-msgstr "メトリック"
-
-msgid "Mode"
-msgstr "モード"
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-"経路のLQと設定値の乗算を行います。設定可能な値は0.01-1です。この設定はLQ レベ"
-"ルが0以上の場合のみ設定可能です。<br />例:192.168.0.1へのLQを半分にする場合: "
-"192.168.0.1 0.5<br />このインターフェースから全てのノードへ対して20%減らす場"
-"合: default 0.8"
-
-msgid "NAT threshold"
-msgstr "NAT しきい値"
-
-msgid "NLQ"
-msgstr "NLQ"
-
-msgid "Neighbors"
-msgstr "隣接ノード"
-
-msgid "Neighbour IP"
-msgstr "隣接ノード IP"
-
-msgid "Neighbours"
-msgstr "隣接ノード"
-
-msgid "Netmask"
-msgstr "ネットマスク"
-
-msgid "Network"
-msgstr "ネットワーク"
-
-msgid "Network address"
-msgstr "ネットワークアドレス"
-
-msgid "Nic changes poll interval"
-msgstr "NIC変更ポーリング間隔"
-
-msgid "Nodes"
-msgstr "ノード"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "OLSR - Display Options"
-msgstr "OLSR - 表示オプション"
-
-msgid "OLSR - HNA-Announcements"
-msgstr "OLSR - HNA (Host and Network Association) 通知"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - プラグイン"
-
-msgid "OLSR Daemon"
-msgstr "OLSR デーモン"
-
-msgid "OLSR Daemon - Interface"
-msgstr "OLSR デーモン - インターフェース"
-
-msgid "OLSR connections"
-msgstr "OLSR コネクション"
-
-msgid "OLSR gateway"
-msgstr "OLSR ゲートウェイ"
-
-msgid "OLSR node"
-msgstr "OLSR ノード"
-
-msgid "Overview"
-msgstr "概要"
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "現在アクティブなOLSR HNA 一覧"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "現在確立済のOLSR接続一覧"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "現在既知のOLSRノードの一覧"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "現在のその他のOLSRノードへの経路一覧"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr "OLSR稼働中のインターフェース一覧"
-
-msgid "Overview of known multiple interface announcements"
-msgstr "通知されているマルチ・インターフェースの一覧"
-
-msgid "Overview of smart gateways in this network"
-msgstr "ネットワーク内のスマート・ゲートウェイ一覧"
-
-msgid "Plugin configuration"
-msgstr "プラグイン設定"
-
-msgid "Plugins"
-msgstr "プラグイン"
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr "OLSRソケットのポーリング間隔を秒単位で設定します。標準は0.05です。"
-
-msgid "Pollrate"
-msgstr "ポーリング間隔"
-
-msgid "Port"
-msgstr "ポート"
-
-msgid "Prefix"
-msgstr "プレフィックス"
-
-msgid "Resolve"
-msgstr "名前解決"
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-"ステータス・ページでホスト名の名前解決を行います。一般的には本機能を使用して"
-"も問題が起こることはありませんが、もしあなたがパブリックIPや不安定なDNS設定を"
-"使用している場合、ページの読み込み速度が極端に遅くなります。その場合はこの機"
-"能を無効にしてください。"
-
-msgid "Routes"
-msgstr "経路"
-
-msgid "Secondary OLSR interfaces"
-msgstr "セカンダリOLSR インターフェース"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-"ルーターのメインIP (発信元IP)を設定してください。このIPは、OLSRdの稼働中は決"
-"して変更しません。標準設定は0.0.0.0であり、プライマリ・インターフェースのIPを"
-"自動的に使用します。"
-
-msgid "SmartGW"
-msgstr "SmartGW"
-
-msgid "SmartGW announcements"
-msgstr "SmartGW 通知"
-
-msgid "SmartGateway is not configured on this system."
-msgstr "スマート・ゲートウェイ(SmartGW)は設定されていません。"
-
-msgid "Source address"
-msgstr "送信元アドレス"
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-"アップリンク速度をキロビット/秒で設定してください。1つ目のパラメータは上り、2"
-"つ目のパラメータは下りのストリームです。標準は\"128 1024\"です。"
-
-msgid "Speed of the uplink"
-msgstr "アップリンク速度"
-
-msgid "State"
-msgstr "状態"
-
-msgid "Status"
-msgstr "ステータス"
-
-msgid "Success rate of packages received from the neighbour"
-msgstr "隣接ノードから受信したパケットの受信成功率"
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr "隣接ノードへ送信したパケットの送信成功率"
-
-msgid "TC"
-msgstr "TC"
-
-msgid "TC interval"
-msgstr "TC 送信間隔"
-
-msgid "TC validity time"
-msgstr "TC 有効時間"
-
-msgid "TOS value"
-msgstr "TOS値"
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-"OLSRデーモンは、Optimized Link State Routingプロコトルを実装したサービスで"
-"す。OLSRはどのようなネットワーク環境でもメッシュルーティングを実現します。"
-"OLSRはアドホック・モードをサポートした全ての無線LANカードをサポートし、もちろ"
-"ん全てのイーサネットデバイスでも使用可能です。<a href='http://www.olsr."
-"org'>olsrd.org</a>にアクセスして、ヘルプ及びドキュメントを参照してください。"
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-"willingnessを固定する場合に使用します。willingnessが設定されていない場合、"
-"バッテリや電源のステータスによって動的に計算されます。標準は\"3\"です。"
-
-msgid "The interface OLSRd should serve."
-msgstr "OLSRdが使用するインターフェースです。"
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-"OLSRが使用するポート番号です。通常、このポート番号はIANAがアサインした698番で"
-"あるべきです。1-65535の間で設定可能です。"
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr "送信間隔及び有効時間"
-
-msgid "Topology"
-msgstr "トポロジー"
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-"OLSRコントロールパケットにおける、IPヘッダのTOS (Type Of Service) 値を設定し"
-"ます。標準設定は\"16\"です。"
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "OLSRデーモンに接続できません！"
-
-msgid "Uplink"
-msgstr "アップリンク"
-
-msgid "Uplink uses NAT"
-msgstr "NATを使用して上位ネットワークに接続する"
-
-msgid "Use hysteresis"
-msgstr "ヒステリシスを使用する"
-
-msgid "Version"
-msgstr "バージョン"
-
-msgid "WLAN"
-msgstr "WLAN"
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-"警告: kmod-ipipがインストールされていません。スマートゲートウェイはkmod-ipip"
-"なしでは動作しません。まず初めにインストールを行なってください。"
-
-msgid "Weight"
-msgstr "Weight"
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-"ホスト間において複数の経路が存在する場合に、どちらのリンクを使用するかの決定"
-"を行うために、インターフェースの重み付けを行います。通常、weightはインター"
-"フェースの特性を基に、OLSRdが自動的に計算を行いますが、固定値を設定することも"
-"可能です。OLSRdは最も低い値のリンクを選択します。<br /><b>注意:</b>インター"
-"フェースの重み付けは、LQ レベルが0の場合のみ、設定可能です。LQ レベルが0以外"
-"の値の場合、インターフェース ETX値が代わりに使用されます。"
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-"どのアップリンクを他のメッシュノードへ通知するかを設定します。アップリンクは"
-"ローカルのHNAである0.0.0.0/0、::ffff:0:0/96、2000::/3を探索することで検出しま"
-"す。標準設定は、\"both\"です。"
-
-msgid "Willingness"
-msgstr "Willingness"
diff --git a/po/ja/openvpn.po b/po/ja/openvpn.po
deleted file mode 100644
index c4aaae9..0000000
--- a/po/ja/openvpn.po
+++ /dev/null
@@ -1,551 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-09 08:12+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', または 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr "追加"
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr "クライアント間通信を許可する"
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr "1つのセッションのみを許可する"
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr "現在設定済のOpenVPNの設定とステータスを表示しています。"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr "設定カテゴリ"
-
-msgid "Configure client mode"
-msgstr "クライアントモードに設定"
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr "サーバーモードに設定"
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr "再接続間隔"
-
-msgid "Cryptography"
-msgstr "暗号設定"
-
-msgid "Daemonize after initialization"
-msgstr "初期化後にデーモン化する"
-
-msgid "Delay n seconds after connection"
-msgstr "セッション接続後、n秒ディレイする"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr "Diffie Hellman パラメータ"
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr "ページングを無効にする"
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr "時刻をログに書き込まない"
-
-msgid "Don't re-read key on restart"
-msgstr "再起動時にキーの再読み込みを行わない"
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "OpenSSL暗号化のハードウェアサポートを有効にする"
-
-msgid "Enable Path MTU discovery"
-msgstr "Path MTU discovery を有効にする"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr "有効"
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr "設定 \"%s\""
-
-msgid "Invalid"
-msgstr "無効"
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr "tun デバイスでIPv6機能を有効にする"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr "ネットワーク"
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "OpenVPN 設定"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr "概要"
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "ポート"
-
-msgid "Protocol"
-msgstr "プロトコル"
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr "サービス"
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr "TCP/UDP のMTUを設定"
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr "ログ出力レベルの設定"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "TCP/UDP の受信バッファサイズ"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "TCP/UDP の送信バッファサイズ"
-
-msgid "Set tun/tap TX queue length"
-msgstr "tun/tap デバイスの送信キューサイズ"
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr "tun/tap デバイスのMTU設定"
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr "開始 / 停止"
-
-msgid "Started"
-msgstr "実行中"
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr "詳細設定へ移動 »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "TCP/UDP ポート (ローカル・リモート共用)"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "TCP/UDP ポート (ローカル, 標準設定=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "TCP/UDP ポート (リモート, 標準設定=1194)"
-
-msgid "TLS cipher"
-msgstr "TLS 暗号化方式"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr "高速LZO圧縮機能を使用する"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr "使用するプロトコル"
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr "いいえ"
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr "はい (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« 基本設定へ移動"
diff --git a/po/ja/p2pblock.po b/po/ja/p2pblock.po
deleted file mode 100644
index 00cccc8..0000000
--- a/po/ja/p2pblock.po
+++ /dev/null
@@ -1,28 +0,0 @@
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/ja/p910nd.po b/po/ja/p910nd.po
deleted file mode 100644
index 99dd93b..0000000
--- a/po/ja/p910nd.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-11-04 18:11+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Bidirectional mode"
-msgstr "双方向モード"
-
-msgid "Device"
-msgstr "デバイス"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"まず初めに、USB(kmod-usb-printer)または、パラレルポート(kmod-lp)をサポートす"
-"るためのパッケージをインストールしてください。"
-
-msgid "Port"
-msgstr "ポート番号"
-
-msgid "Settings"
-msgstr "設定"
-
-msgid "TCP listener port."
-msgstr "TCP接続待ちポート"
-
-msgid "enable"
-msgstr "有効"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - プリンタサーバー"
-
-#~ msgid "port_help"
-#~ msgstr "port_help"
diff --git a/po/ja/pbx-voicemail.po b/po/ja/pbx-voicemail.po
deleted file mode 100644
index 19e26bf..0000000
--- a/po/ja/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/ja/pbx.po b/po/ja/pbx.po
deleted file mode 100644
index 4b465e7..0000000
--- a/po/ja/pbx.po
+++ /dev/null
@@ -1,458 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-21 07:57+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr "Eメール"
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr "外部SIPポート"
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr "基本設定"
-
-msgid "Google Accounts"
-msgstr "Google アカウント"
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr "Google Voice/Talk アカウント"
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr "QoS ルール設定を有効にする"
-
-msgid "Makes Outgoing Calls"
-msgstr "発信を許可する"
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr "いいえ"
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr "PBX メインページ"
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "Password"
-msgstr "パスワード"
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr "QoS 設定"
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr "受信を許可する"
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr "SIP アカウント"
-
-msgid "SIP Device/Softphone Accounts"
-msgstr "SIP デバイス/ソフトフォン アカウント"
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr "サーバー設定"
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr "ユーザーエージェント名"
-
-msgid "User Name"
-msgstr "ユーザー名"
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr "はい"
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-#~ msgid "Account Status"
-#~ msgstr "アカウントのステータス"
-
-#~ msgid "Account Status Message"
-#~ msgstr "アカウントステータス・メッセージ"
diff --git a/po/ja/polipo.po b/po/ja/polipo.po
deleted file mode 100644
index 608b7bb..0000000
--- a/po/ja/polipo.po
+++ /dev/null
@@ -1,230 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-20 07:15+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Allowed clients"
-msgstr "アクセスを許可するクライアント"
-
-msgid "Always use system DNS resolver"
-msgstr "常にシステムのDNS名前解決を使用する"
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Basic認証をサポートしています。\"ユーザー名:パスワード\"の形式で入力してくだ"
-"さい。"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr "DNSおよびクエリ設定"
-
-msgid "DNS server address"
-msgstr "DNSサーバーアドレス"
-
-msgid "Delete cache files time"
-msgstr "キャッシュファイルを保持する時間"
-
-msgid "Disk cache location"
-msgstr "ディスクキャッシュの保存場所"
-
-msgid "Do not query IPv6"
-msgstr "IPv6の問い合わせを行わない"
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "複数ユーザーでキャッシュを共有する場合、有効にしてください。"
-
-msgid "First PMM segment size (in bytes)"
-msgstr "ファーストPMM セグメントサイズ (単位:バイト)"
-
-msgid "General Settings"
-msgstr "基本設定"
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "PolipoがRAM上で使用するキャッシュサイズを設定してください。"
-
-msgid "In RAM cache size (in bytes)"
-msgstr "RAM キャッシュサイズ (単位:バイト)"
-
-msgid "Listen address"
-msgstr "待ち受けアドレス"
-
-msgid "Listen port"
-msgstr "待ち受けポート"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Polipoが使用するキャッシュファイルの保存場所を設定します。キャッシュは頻繁に"
-"更新されるため、外部デバイスに保存することを推奨します。空欄に設定した場合、"
-"ディスクキャッシュは無効化されます。"
-
-msgid "Log file location"
-msgstr "ログファイルの保存場所"
-
-msgid "Log to syslog"
-msgstr "syslogにログを記録する"
-
-msgid "Logging and RAM"
-msgstr "ログとRAM設定"
-
-msgid "Never use system DNS resolver"
-msgstr "システムのDNS名前解決を使用しない"
-
-msgid "On-Disk Cache"
-msgstr "ディスクキャッシュ"
-
-msgid "PMM segments size (in bytes)"
-msgstr "PMM セグメントサイズ (単位:バイト)"
-
-msgid "Parent Proxy"
-msgstr "親プロキシ"
-
-msgid "Parent proxy address"
-msgstr "親プロキシ・アドレス"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Polipoがリクエストを転送する、親プロキシサーバーのアドレスを\"ホスト:ポート番"
-"号\"の形式で設定してください。"
-
-msgid "Parent proxy authentication"
-msgstr "親プロキシの認証"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipoは、軽量で高速なWEBプロキシキャッシュサーバーです。"
-
-msgid "Poor Man's Multiplexing"
-msgstr "Poor Man's Multiplexing"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"Poor Man's Multiplexing (PMM) は、複数のセグメントに渡ってインスタンスをリク"
-"エストすることで、多重化をシュミレートする技術であり、HTTPプロトコルの弱点に"
-"よるレイテンシを低減する試みを行います。注意:PMMを有効にしていると、いくつか"
-"のサイトではつながらなくなる可能性があります。"
-
-msgid "Port on which Polipo will listen"
-msgstr "Polipoが待ち受けを行うポート番号です。"
-
-msgid "Proxy"
-msgstr "プロキシ"
-
-msgid "Query DNS by hostname"
-msgstr "ホスト名のDNS問い合わせ"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr "IPv6 DNS問い合わせ"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr "IPv4とIPv6の問い合わせを行う (IPv4を優先)"
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr "IPv4とIPv6の問い合わせを行う (IPv6を優先)"
-
-msgid "Query only IPv6"
-msgstr "IPv6のみ問い合わせを行う"
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Polipoがシステムとは別のDNSサーバーを使用する場合、DNSサーバーのアドレスを設"
-"定してください。"
-
-msgid "Shared cache"
-msgstr "共有キャッシュ"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"最初のPMM セグメントのサイズを設定します。設定されなかった場合、PMM セグメン"
-"トサイズの倍のサイズをデフォルト値として設定します。"
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"Polipoが待ち受けを行うインターフェースです。0.0.0.0 または :: (IPv6) を設定し"
-"た場合、全てのインターフェースで待ち受けを行います。"
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-"PMM を有効にする場合、PMM セグメントサイズにはプラスの値を設定してください。"
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"ログファイルは頻繁に更新されるため、外部デバイスに保存することを推奨します。"
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-"待ち受けアドレスを0.0.0.0 または :: (IPv6) に設定した場合、アクセスを許可する"
-"クライアントアドレスを設定してください。設定フォーマットはIPアドレスかネット"
-"ワークアドレスです。(例:192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 "
-"(IPv6))"
-
-msgid "enable"
-msgstr "サービスを有効にする"
diff --git a/po/ja/qos.po b/po/ja/qos.po
deleted file mode 100644
index 4044abc..0000000
--- a/po/ja/qos.po
+++ /dev/null
@@ -1,105 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2011-10-28 11:02+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Calculate overhead"
-msgstr "オーバーヘッドを考慮する"
-
-msgid "Classification Rules"
-msgstr "区分ルール"
-
-msgid "Classification group"
-msgstr "区分グループ"
-
-msgid "Destination host"
-msgstr "宛先ホスト"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr "ダウンロード速度 (kbit/s)"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "Half-duplex"
-msgstr "半二重"
-
-msgid "Interfaces"
-msgstr "インターフェース"
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr "バイト数"
-
-msgid "Ports"
-msgstr "ポート"
-
-msgid "Protocol"
-msgstr "プロトコル"
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr "Quality of Service"
-
-msgid "Service"
-msgstr "サービス"
-
-msgid "Source host"
-msgstr "送信元ホスト"
-
-msgid "Target"
-msgstr "対象"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr "アップロード速度 (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"<abbr title=\"Quality of Service\">QoS</abbr>はアドレス、ポート、サービスで区"
-"別して、ネットワークトラフィックに優先度を付与することが可能です。"
-
-msgid "all"
-msgstr "全て"
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr "標準"
-
-msgid "express"
-msgstr "高速"
-
-msgid "low"
-msgstr "低速"
-
-msgid "normal"
-msgstr "標準"
-
-msgid "priority"
-msgstr "最優先"
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/ja/radvd.po b/po/ja/radvd.po
deleted file mode 100644
index 35cde34..0000000
--- a/po/ja/radvd.po
+++ /dev/null
@@ -1,378 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-16 09:35+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: German\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "6to4 interface"
-msgstr "6to4 インターフェース"
-
-msgid "Address"
-msgstr "アドレス"
-
-msgid "Addresses"
-msgstr "アドレス"
-
-msgid "Advanced"
-msgstr "詳細設定"
-
-msgid "Advertise Home Agent flag"
-msgstr "ホームエージェントフラグの広告"
-
-msgid "Advertise router address"
-msgstr "ルーターアドレスの広告"
-
-msgid "Advertised Domain Suffixes"
-msgstr "広告するドメインサフィックスを設定します。"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"広告するIPv6 RDNSSを設定します。未設定の場合、現在のインターフェースのIPv6 ア"
-"ドレスに設定します。"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "広告するIPv6 プレフィクスを設定します"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"広告するIPv6 プレフィクスを設定します。未設定の場合、現在のインターフェースの"
-"プレフィクスに設定します。"
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "モバイルIPv6 ホームエージェント機能の広告を行います。 (RFC3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr "広告"
-
-msgid "Autonomous"
-msgstr "Autonomous"
-
-msgid "Clients"
-msgstr "クライアント"
-
-msgid "Configuration flag"
-msgstr "Configuration フラグ"
-
-msgid "Current hop limit"
-msgstr "現在のホップ数制限"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "DNSSL 設定"
-
-msgid "Default lifetime"
-msgstr "標準有効時間"
-
-msgid "Default preference"
-msgstr "標準優先度設定"
-
-msgid "Enable"
-msgstr "有効"
-
-msgid "Enable advertisements"
-msgstr "広告を有効にする"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "ルータ広告および要請を有効にする"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr "基本設定"
-
-msgid "Home Agent information"
-msgstr "ホームエージェント 情報"
-
-msgid "Home Agent lifetime"
-msgstr "ホームエージェント 有効時間"
-
-msgid "Home Agent preference"
-msgstr "ホームエージェント 優先度"
-
-msgid "Include Home Agent Information in the RA"
-msgstr "ルータ広告 (RA) にホームエージェント情報を含める"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr "インターフェース"
-
-msgid "Interface Configuration"
-msgstr "インターフェース設定"
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "インターフェース"
-
-msgid "Lifetime"
-msgstr "有効時間"
-
-msgid "Link MTU"
-msgstr "リンクMTU"
-
-msgid "Managed flag"
-msgstr "Managed フラグ"
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr "ルータ要請最大送信間隔"
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr "ルータ要請最低送信間隔"
-
-msgid "Mobile IPv6"
-msgstr "モバイル IPv6"
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr "モバイル IPv6 ルータ登録"
-
-msgid "Multicast"
-msgstr "マルチキャスト"
-
-msgid "On-link"
-msgstr "On-link"
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr "優先度"
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr "プレフィクス"
-
-msgid "Prefix Configuration"
-msgstr "プレフィクス設定"
-
-msgid "Prefixes"
-msgstr "プレフィクス"
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr "RDNSS 設定"
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr "Radvd - DNSSL"
-
-msgid "Radvd - Interface %q"
-msgstr "Radvd - インターフェース %q"
-
-msgid "Radvd - Prefix"
-msgstr "Radvd - プレフィクス"
-
-msgid "Radvd - RDNSS"
-msgstr "Radvd - RDNSS"
-
-msgid "Radvd - Route"
-msgstr "Radvd - 経路"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-"Radvdは、IPv6用のルータ広告デーモンです。RadvdはRFC 4861に規定されている、"
-"ルータ要請の受信と、ルータ広告の送信を行います。"
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-"設定されたクライアントに対してのみ通信を行います。設定しない場合、マルチキャ"
-"ストを行います。"
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr "経路設定"
-
-msgid "Routes"
-msgstr "経路"
-
-msgid "Source link-layer address"
-msgstr "送信元リンク層アドレス"
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr "このセクションで使用する論理インターフェース名を設定してください。"
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr "サフィックス"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr "タイミング設定"
-
-msgid "Unicast only"
-msgstr "ユニキャストのみ"
-
-msgid "Valid lifetime"
-msgstr "有効時間の設定"
-
-msgid "Validity time"
-msgstr "有効時間"
-
-msgid "default"
-msgstr "default"
-
-msgid "high"
-msgstr "高"
-
-msgid "low"
-msgstr "低"
-
-msgid "medium"
-msgstr "中"
-
-msgid "no"
-msgstr "いいえ"
-
-msgid "yes"
-msgstr "はい"
diff --git a/po/ja/rrdtool.po b/po/ja/rrdtool.po
deleted file mode 100644
index 95545db..0000000
--- a/po/ja/rrdtool.po
+++ /dev/null
@@ -1,358 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/ja/samba.po b/po/ja/samba.po
deleted file mode 100644
index c527507..0000000
--- a/po/ja/samba.po
+++ /dev/null
@@ -1,81 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-11-03 18:09+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "ゲストアクセスを許可"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr "sambaを介してユーザーのホームディレクトリへのアクセスを許可します"
-
-msgid "Allowed users"
-msgstr "許可されたユーザー"
-
-msgid "Create mask"
-msgstr "マスクの作成"
-
-msgid "Description"
-msgstr "説明"
-
-msgid "Directory mask"
-msgstr "ディレクトリのマスク"
-
-msgid "Edit Template"
-msgstr "テンプレートの編集"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "samba設定を生成するテンプレートを編集します。"
-
-msgid "General Settings"
-msgstr "一般設定"
-
-msgid "Hostname"
-msgstr "ホスト名"
-
-msgid "Mask for new directories"
-msgstr "新規ディレクトリのマスク"
-
-msgid "Mask for new files"
-msgstr "新規ファイルのマスク"
-
-msgid "Name"
-msgstr "名前"
-
-msgid "Network Shares"
-msgstr "ネットワーク共有"
-
-msgid "Path"
-msgstr "パス"
-
-msgid "Read-only"
-msgstr "読み込みのみ"
-
-msgid "Share home-directories"
-msgstr "ホームディレクトリの共有"
-
-msgid "Shared Directories"
-msgstr "共有ディレクトリ"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"これは、samba設定を生成するための'/etc/samba/smb.conf.template' ファイルの内"
-"容です。パイプ('|')で閉じられた値は変更しないでください。これらの値は'一般設"
-"定'タブ内の値によって置き換えられます。"
-
-msgid "Workgroup"
-msgstr "ワークグループ"
diff --git a/po/ja/splash.po b/po/ja/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/ja/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/ja/statistics.po b/po/ja/statistics.po
deleted file mode 100644
index 99c5e1b..0000000
--- a/po/ja/statistics.po
+++ /dev/null
@@ -1,601 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-20 08:55+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr "ベース・ディレクトリ"
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr "CSV プラグイン設定"
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Collectd 設定"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr "DF プラグイン設定"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr "データの収集間隔"
-
-msgid "Datasets definition file"
-msgstr "データベース定義ファイル"
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr "collectd プラグインディレクトリ"
-
-msgid "Directory for sub-configurations"
-msgstr "サブ設定ディレクトリ"
-
-msgid "Disk Plugin Configuration"
-msgstr "ディスクプラグイン設定"
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "時間帯表示 »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "E-メールプラグイン設定"
-
-msgid "Email"
-msgstr "Eメール"
-
-msgid "Enable this plugin"
-msgstr "プラグイン設定を有効にする"
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr "ファイアウォール"
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr "グラフ"
-
-msgid "Group"
-msgstr "グループ"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "ホスト名"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr "IRQ プラグイン設定"
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr "設定値以外の全てのインターフェースをモニターする"
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr "モニターするインターフェースの設定"
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Netlink プラグイン設定"
-
-msgid "Network"
-msgstr "ネットワーク"
-
-msgid "Network Plugin Configuration"
-msgstr "ネットワークプラグイン設定"
-
-msgid "Network plugins"
-msgstr "ネットワークプラグイン"
-
-msgid "Network protocol"
-msgstr "ネットワークプロトコル"
-
-msgid "Number of threads for data collection"
-msgstr "データ収集用スレッド数"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr "OLSRd プラグイン設定"
-
-msgid "Only create average RRAs"
-msgstr "平均値のRRAsのみ作成する"
-
-msgid "Options"
-msgstr "オプション"
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr "出力プラグイン"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Ping プラグイン設定"
-
-msgid "Port"
-msgstr "ポート"
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "RRDTool プラグイン設定"
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr "スクリプト"
-
-msgid "Seconds"
-msgstr "秒"
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr "保存先ディレクトリ"
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr "システムプラグイン"
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"インターフェースプラグインは、選択したインターフェースのトラフィックの統計情"
-"報を収集します。"
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-"iwinfo プラグインは、無線信号強度、ノイズ、クオリティ情報を収集します。"
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "負荷プラグインは、システム負荷の統計情報を収集します。"
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr "使用するPIDファイルの保存場所"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr "無線LAN iwinfo プラグイン設定"
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr "rrdファイルのサイズを小さくします。"
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/ja/tinyproxy.po b/po/ja/tinyproxy.po
deleted file mode 100644
index 03ea890..0000000
--- a/po/ja/tinyproxy.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-10-05 17:53+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"転送するリクエストのHTTPヘッダに\"X-Tinyproxy\"及びクライアントIPアドレスを追"
-"加します。"
-
-msgid "Allowed clients"
-msgstr "接続を許可するクライアント"
-
-msgid "Allowed connect ports"
-msgstr "接続を許可するポート番号"
-
-msgid "Bind address"
-msgstr "バインドするIPアドレス"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"標準では、基本的なPOSIX正規表現がフィルタリングに使用されますが、このオプショ"
-"ンが有効に設定されている場合、拡張版のPOSIX正規表現が用いられます。"
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-"標準では、フィルターの文字列は大文字小文字を区別しませんが、このオプションが"
-"有効に設定されている場合、区別してフィルタリングを行います。"
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-"標準では、ドメイン名を使用してフィルタリングを行いますが、このオプションが有"
-"効に設定されている場合、代わりにURLに対してフィルタリングを行います。"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"標準では、フィルタリング・ルールはブラックリストとして動作しますが、このオプ"
-"ションが有効に設定されている場合、URLまたはドメイン名が一致した場合のみ、接続"
-"が許可されます。"
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr "接続タイムアウト"
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr "Tinyproxy サーバーを有効にする"
-
-msgid "Error page"
-msgstr "エラーページ"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr "正規表現フィルタリング"
-
-msgid "Filter by URLs"
-msgstr "URL フィルタリング"
-
-msgid "Filter case-sensitive"
-msgstr "大文字小文字を区別してフィルタリング"
-
-msgid "Filter file"
-msgstr "フィルタファイル"
-
-msgid "Filtering and ACLs"
-msgstr "フィルタリングとアクセス制御"
-
-msgid "General settings"
-msgstr "基本設定"
-
-msgid "Group"
-msgstr "グループ"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr "リクエスト数を表示するHTMLテンプレートファイル"
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "HTTPエラー時に表示するHTMLテンプレートファイル"
-
-msgid "Header whitelist"
-msgstr "ヘッダー・ホワイトリスト"
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr "プロキシサーバーの使用を許可するIPアドレスリストです。"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-"プロキシサーバーから接続可能なポートリストです。\"0\"を設定した場合、すべての"
-"ポートを許可します。"
-
-msgid "Listen address"
-msgstr "待受アドレス"
-
-msgid "Listen port"
-msgstr "待受ポート"
-
-msgid "Log file"
-msgstr "ログファイル"
-
-msgid "Log file to use for dumping messages"
-msgstr "メッセージを書き込むログファイルを指定します。"
-
-msgid "Log level"
-msgstr "ログレベル"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr "Tinyproxyプロセスのログの詳細度を設定"
-
-msgid "Max. clients"
-msgstr "最大クライアント数"
-
-msgid "Max. requests per server"
-msgstr "サーバー毎の最大リクエスト数"
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-"プロセス毎の許可される最大リクエスト数を設定します。設定値を超えた場合、プロ"
-"セスを再起動します。0を入力すると、無制限に設定されます。"
-
-msgid "Maximum number of prepared idle processes"
-msgstr "アイドル状態で準備するプロセスの最大数"
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr "アイドル状態で準備するプロセスの最小数"
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr "ポリシー"
-
-msgid "Privacy settings"
-msgstr "プライバシー設定"
-
-msgid "Reject access"
-msgstr "アクセス拒否"
-
-msgid "Server Settings"
-msgstr "サーバー設定"
-
-msgid "Server limits"
-msgstr "サーバー制限設定"
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr "リクエストに対して、Tinyproxyが待ち受けるHTTPポートを設定します"
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr "リクエストに対して、Tinyproxyが待ち受けるアドレスを設定します。"
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr "Tinyproxyを実行するグループを設定します"
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-"特定のホストにアクセスする際に使用する、上位のプロキシサーバーを設定します。"
-"書式は <code>アドレス:ポート</code> です。"
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr "Tinyproxyを実行するユーザーを設定します"
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr "宛先ホスト"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-"Tinyproxyは、軽量で高速なキャッシュを行わないHTTP(S)-プロキシサーバーです。"
-
-msgid "Upstream Proxies"
-msgstr "上位のプロキシサーバー"
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-"特定のIPアドレスやドメインに接続する場合に、上位のプロキシサーバーを使用する"
-"ように設定することができます。"
-
-msgid "Use syslog"
-msgstr "Syslogを使用する"
-
-msgid "User"
-msgstr "ユーザー"
-
-msgid "Via hostname"
-msgstr "経由するホスト名"
-
-msgid "Via proxy"
-msgstr "経由するプロキシ"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr "ログファイルの代わりにsyslogへメッセージを記録します"
-
-msgid "X-Tinyproxy header"
-msgstr "X-Tinyproxy ヘッダー"
diff --git a/po/ja/transmission.po b/po/ja/transmission.po
deleted file mode 100644
index 76767e9..0000000
--- a/po/ja/transmission.po
+++ /dev/null
@@ -1,295 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-18 11:15+0200\n"
-"PO-Revision-Date: 2012-04-19 04:47+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Alternative download speed"
-msgstr "一時的な下り速度制限"
-
-msgid "Alternative speed enabled"
-msgstr "一時的な速度制限機能を有効にする"
-
-msgid "Alternative speed time begin"
-msgstr "一時的な速度制限 開始時間"
-
-msgid "Alternative speed time day"
-msgstr "一時的な速度制限 制限日"
-
-msgid "Alternative speed time end"
-msgstr "一時的な速度制限 終了時間"
-
-msgid "Alternative speed timing enabled"
-msgstr "一時的な速度制限のスケジューリング機能を有効にする"
-
-msgid "Alternative upload speed"
-msgstr "一時的な上り速度制限"
-
-msgid "Automatically start added torrents"
-msgstr "追加されたtorrent は自動的に開始する"
-
-msgid "Bandwidth settings"
-msgstr "帯域設定"
-
-msgid "Binding address IPv4"
-msgstr "バインドするIPv4 アドレス"
-
-msgid "Binding address IPv6"
-msgstr "バインドするIPv6 アドレス"
-
-msgid "Block list enabled"
-msgstr "ブロックリストを有効にする"
-
-msgid "Blocklist URL"
-msgstr "ブロックリスト URL"
-
-msgid "Blocklists"
-msgstr "ブロックリスト"
-
-msgid "Cache size in MB"
-msgstr "キャッシュサイズ (MB)"
-
-msgid "Config file directory"
-msgstr "コンフィグファイル・ディレクトリ"
-
-msgid "DHT enabled"
-msgstr "DHTを有効にする"
-
-msgid "Debug"
-msgstr "デバッグ情報"
-
-msgid "Download directory"
-msgstr "ダウンロード先のディレクトリ"
-
-msgid "Download queue enabled"
-msgstr "ダウンロード・キュー機能を有効にする"
-
-msgid "Download queue size"
-msgstr "ダウンロード・キューのサイズ"
-
-msgid "Enable watch directory"
-msgstr "ディレクトリ監視機能を有効にする"
-
-msgid "Enabled"
-msgstr "サービスを有効にする"
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr "エラー情報"
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr "ファイルおよびロケーション設定"
-
-msgid "Forced"
-msgstr "強制する"
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr "全体の最大ピア数"
-
-msgid "Global settings"
-msgstr "グローバル設定"
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr "情報"
-
-msgid "LPD enabled"
-msgstr "LPD を有効にする"
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr "メッセージレベル"
-
-msgid "Miscellaneous"
-msgstr "詳細設定"
-
-msgid "None"
-msgstr "なし"
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr "使用しない"
-
-msgid "Open Web Interface"
-msgstr "WEBブラウザで開く"
-
-msgid "PEX enabled"
-msgstr "PEX を有効にする"
-
-msgid "Peer Port settings"
-msgstr "ピアポート設定"
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr "torrent 毎の最大ピア数"
-
-msgid "Peer port"
-msgstr "ピアポート"
-
-msgid "Peer port random high"
-msgstr "ポートをランダムに選択する際の上限値"
-
-msgid "Peer port random low"
-msgstr "ポートをランダムに選択する際の下限値"
-
-msgid "Peer port random on start"
-msgstr "サービススタート時にポートをランダムに選択する"
-
-msgid "Peer settings"
-msgstr "ピア設定"
-
-msgid "Peer socket tos"
-msgstr "ピアソケットのTOS"
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr "優先する"
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr "キューイング設定"
-
-msgid "RPC URL"
-msgstr "RPC URL"
-
-msgid "RPC authentication required"
-msgstr "RPC 認証機能を有効にする"
-
-msgid "RPC bind address"
-msgstr "RPC バインドアドレス"
-
-msgid "RPC enabled"
-msgstr "RPC機能を有効にする"
-
-msgid "RPC password"
-msgstr "RPC パスワード"
-
-msgid "RPC port"
-msgstr "RPC ポート"
-
-msgid "RPC settings"
-msgstr "RPC 設定"
-
-msgid "RPC username"
-msgstr "RPC ユーザー名"
-
-msgid "RPC whitelist"
-msgstr "RPC ホワイトリスト"
-
-msgid "RPC whitelist enabled"
-msgstr "RPC ホワイトリスト機能を有効にする"
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr "デーモンのユーザー権限設定"
-
-msgid "Scheduling"
-msgstr "スケジューラ設定"
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr "torrent 完了時にスクリプトを実行する"
-
-msgid "Script torrent done filename"
-msgstr "torrent 完了時に実行するスクリプト・ファイルパス"
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr "下り速度制限"
-
-msgid "Speed limit down enabled"
-msgstr "下り速度制限機能を有効にする"
-
-msgid "Speed limit up"
-msgstr "上り速度制限"
-
-msgid "Speed limit up enabled"
-msgstr "上り速度制限機能を有効にする"
-
-msgid "Transmission"
-msgstr "Transmission"
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr "Transmissionは、シンプルなbittorrentクライアントです。"
-
-msgid "Trash original torrent files"
-msgstr "オリジナルのtorrent ファイルをゴミ箱に移動する"
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr "監視するディレクトリ"
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr "uTP を有効にする"
diff --git a/po/ja/upnp.po b/po/ja/upnp.po
deleted file mode 100644
index 69cf776..0000000
--- a/po/ja/upnp.po
+++ /dev/null
@@ -1,162 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-19 07:56+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"アクセス制御リスト(ACL) は、どの外部ポートからどの内部アドレス及びポートへリ"
-"ダイレクトするかを設定します。"
-
-msgid "Action"
-msgstr "動作"
-
-msgid "Active UPnP Redirects"
-msgstr "稼働中のUPnPリダイレクト"
-
-msgid "Advanced Settings"
-msgstr "詳細設定"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr "通知するモデル番号"
-
-msgid "Announced serial number"
-msgstr "通知するシリアル番号"
-
-msgid "Clean rules interval"
-msgstr "ルール消去間隔"
-
-msgid "Clean rules threshold"
-msgstr "ルール消去しきい値"
-
-msgid "Client Address"
-msgstr "クライアント・アドレス"
-
-msgid "Client Port"
-msgstr "クライアント・ポート"
-
-msgid "Collecting data..."
-msgstr "データ収集中です..."
-
-msgid "Comment"
-msgstr "コメント"
-
-msgid "Delete Redirect"
-msgstr "リダイレクトを削除"
-
-msgid "Device UUID"
-msgstr "デバイス UUID"
-
-msgid "Downlink"
-msgstr "ダウンリンク"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "NAT-PMP機能を有効にする"
-
-msgid "Enable UPnP functionality"
-msgstr "UPnP機能を有効にする"
-
-msgid "Enable additional logging"
-msgstr "ログ機能を有効にする"
-
-msgid "Enable secure mode"
-msgstr "セキュアモードを有効にする"
-
-msgid "External Port"
-msgstr "外部ポート"
-
-msgid "External ports"
-msgstr "外部ポート"
-
-msgid "General Settings"
-msgstr "一般設定"
-
-msgid "Internal addresses"
-msgstr "内部アドレス"
-
-msgid "Internal ports"
-msgstr "内部ポート"
-
-msgid "MiniUPnP ACLs"
-msgstr "MiniUPnP アクセス制御リスト (ACL)"
-
-msgid "MiniUPnP settings"
-msgstr "MiniUPnP 設定"
-
-msgid "Notify interval"
-msgstr "通知間隔"
-
-msgid "Port"
-msgstr "ポート"
-
-msgid "Presentation URL"
-msgstr "プレゼンテーション URL"
-
-msgid "Protocol"
-msgstr "プロトコル"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "追加のデバッグ情報をシステムログへ挿入する"
-
-msgid "Report system instead of daemon uptime"
-msgstr "サービスの起動時間の代わりにシステムの起動時間を使用する"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "UPnP及びNAT-PMPサービスを開始する"
-
-msgid "There are no active redirects."
-msgstr "有効なリダイレクトはありません。"
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnPを使用することで、ローカルネットワーク内のクライアントが自動的にルータを"
-"構成することができます。"
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnPを使用することで、ローカルネットワーク内のクライアントが自動的にルータを"
-"構成することができます。"
-
-msgid "UPnP lease file"
-msgstr "UPnP リースファイル"
-
-msgid "Universal Plug & Play"
-msgstr "ユニバーサル プラグ &#38; プレイ"
-
-msgid "Uplink"
-msgstr "アップリンク"
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr "有効"
-
-#~ msgid ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
-#~ msgstr ""
-#~ "UPnPはあなたの使用するネットワークに対して、セキュリティリスクが生じる可能"
-#~ "性があるため、必要な場合のみ有効にしてください。"
diff --git a/po/ja/ushare.po b/po/ja/ushare.po
deleted file mode 100644
index 3803e3c..0000000
--- a/po/ja/ushare.po
+++ /dev/null
@@ -1,49 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Content directories"
-msgstr "コンテンツディレクトリ"
-
-msgid "Disable telnet console"
-msgstr "telnelコンソールを無効にする"
-
-msgid "Disable webinterface"
-msgstr "Webインターフェースを無効にする"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "オプション"
-
-msgid "Servername"
-msgstr "サーバー名"
-
-msgid "Settings"
-msgstr "設定"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/ja/uvc_streamer.po b/po/ja/uvc_streamer.po
deleted file mode 100644
index ac20906..0000000
--- a/po/ja/uvc_streamer.po
+++ /dev/null
@@ -1,43 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-06-17 10:56+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "FPS"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "解像度"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "設定"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "ウェブカムストリーミング"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Linux-UVC互換のウェブカムを設定します。ブラウザで<a href=\"http://%s:%i/"
-"\">http://%s:%i/</a>にアクセスしてください。"
diff --git a/po/ja/vnstat.po b/po/ja/vnstat.po
deleted file mode 100644
index 8708c6f..0000000
--- a/po/ja/vnstat.po
+++ /dev/null
@@ -1,68 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-08-19 06:15+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: German\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configuration"
-msgstr "設定"
-
-msgid "Daily traffic"
-msgstr "１日周期のトラフィック"
-
-msgid "Graphs"
-msgstr "グラフ"
-
-msgid "Hourly traffic"
-msgstr "１時間周期のトラフィック"
-
-msgid "Monitor selected interfaces"
-msgstr "モニターするインターフェースを選択"
-
-msgid "Monthly traffic"
-msgstr "１月周期のトラフィック"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"データベースが設定されていません。VnStat設定ページへ移動し、１つ以上のイン"
-"ターフェースのモニタリングを有効にしてください。"
-
-msgid "Restart VnStat"
-msgstr "VnStatを再起動"
-
-msgid "Summary display"
-msgstr "サマリーを表示"
-
-msgid "Top 10 display"
-msgstr "トップ10を表示"
-
-msgid "Update »"
-msgstr "更新 »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "VnStat グラフ"
-
-msgid "VnStat Traffic Monitor"
-msgstr "VnStatトラフィックモニタ"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStatは選択したインタフェースのネットワークトラフィックをロギングするLinuxの"
-"トラフィックモニターです。"
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "VnStatサービスは再起動しました。"
diff --git a/po/ja/voice_core.po b/po/ja/voice_core.po
deleted file mode 100644
index c7e60e2..0000000
--- a/po/ja/voice_core.po
+++ /dev/null
@@ -1,18 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Phones"
-msgstr "電話"
-
-msgid "Voice"
-msgstr ""
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/ja/voice_diag.po b/po/ja/voice_diag.po
deleted file mode 100644
index 715f411..0000000
--- a/po/ja/voice_diag.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/ja/watchcat.po b/po/ja/watchcat.po
deleted file mode 100644
index c4acb26..0000000
--- a/po/ja/watchcat.po
+++ /dev/null
@@ -1,61 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-17 16:19+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Forced reboot delay"
-msgstr "強制再起動ディレイ時間"
-
-msgid "Host address to ping"
-msgstr "ping を実行する宛先を設定してください。"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"どの程度の間隔でインターネット接続をチェックするか設定します。標準の単位は秒"
-"単位ですが、'm'を接尾に付けると分、'h'を付けると時、'd'を付けると日数に設定さ"
-"れます。"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr "動作モード"
-
-msgid "Period"
-msgstr "周期"
-
-msgid "Ping host"
-msgstr "Ping 宛先ホスト"
-
-msgid "Ping period"
-msgstr "Ping 間隔"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Watchcatでは、定期的な再起動や、インターネット接続が一定期間切断された際の再"
-"起動を行うような設定が可能です。"
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/ja/wol.po b/po/ja/wol.po
deleted file mode 100644
index 615239f..0000000
--- a/po/ja/wol.po
+++ /dev/null
@@ -1,55 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2011-08-18 08:57+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: none\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "全てのインターフェースでブロードキャストする"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "起動するホストのMACアドレスを選択または入力してください"
-
-msgid "Host to wake up"
-msgstr "起動するホストを指定"
-
-msgid "Network interface to use"
-msgstr "使用するネットワークインターフェース"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"片方のツールのみが動作する場合があるため、片方が失敗する場合は別のツールを試"
-"してみてください。"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "WoLパケットを送信するインタフェースを指定"
-
-msgid "Starting WoL utility:"
-msgstr "WoLユーティリティを起動:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LANはローカルネットワーク内のコンピュータを遠隔で起動させることができ"
-"る機能です。"
-
-msgid "Wake up host"
-msgstr "ホストを起動"
-
-msgid "WoL program"
-msgstr "WoLプログラム"
diff --git a/po/ja/wshaper.po b/po/ja/wshaper.po
deleted file mode 100644
index ca0e076..0000000
--- a/po/ja/wshaper.po
+++ /dev/null
@@ -1,57 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-17 18:28+0200\n"
-"PO-Revision-Date: 2012-03-18 09:07+0200\n"
-"Last-Translator: Kentaro <kentaro.matsuyama@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "下りリンク"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "下りリンク帯域 (kbit/sec)"
-
-msgid "Host or Network in CIDR notation."
-msgstr "ホスト名またはCIDR表記のネットワークアドレス"
-
-msgid "Interface"
-msgstr "インターフェース"
-
-msgid "Low priority destination ports"
-msgstr "低優先度の宛先ポート"
-
-msgid "Low priority hosts (Destination)"
-msgstr "低優先度の宛先ホスト"
-
-msgid "Low priority hosts (Source)"
-msgstr "低優先度の送信元ホスト"
-
-msgid "Low priority source ports"
-msgstr "低優先度の送信元ポート"
-
-msgid "Uplink"
-msgstr "上りリンク"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "上りリンク帯域 (kbit/sec)"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Wondershaper 設定"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Wondweshaperは、インターネット接続が飽和状態の場合でも、低いレイテンシ・円滑"
-"な通信を実現するためにトラフィック・シェーピングを行います。"
diff --git a/po/ms/ahcp.po b/po/ms/ahcp.po
deleted file mode 100644
index 7217eb8..0000000
--- a/po/ms/ahcp.po
+++ /dev/null
@@ -1,105 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "AHCP Server"
-msgstr ""
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Lease directory"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Served interfaces"
-msgstr ""
-
-msgid "Server"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "Unique ID file"
-msgstr ""
diff --git a/po/ms/asterisk.po b/po/ms/asterisk.po
deleted file mode 100644
index e1260e1..0000000
--- a/po/ms/asterisk.po
+++ /dev/null
@@ -1,611 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-05-03 12:40+1000\n"
-"PO-Revision-Date: 2010-05-05 23:32+1000\n"
-"Last-Translator: Wai Chet Teow <waichet@hotmail.com>\n"
-"Language-Team: LANGUAGE\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Pilihan Umum Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "AGI Direktori"
-
-#, fuzzy
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Cache dicatat semasa rakaman fail bunyi"
-
-#, fuzzy
-#~ msgid "Debug Level"
-#~ msgstr "Tingkatan debug"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Mematikan beberapa amaran"
-
-#, fuzzy
-#~ msgid "Dump core on crash"
-#~ msgstr "Dump teras dalam kemalangan"
-
-#~ msgid "High Priority"
-#~ msgstr "Keutamaan Tinggi"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Menginisialisasinya Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Gunakan Intern pemilihan waktu"
-
-#, fuzzy
-#~ msgid "Log directory"
-#~ msgstr "Direktori log"
-
-#, fuzzy
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Jumlah maksimum panggilan dibenarkan"
-
-#, fuzzy
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "beban maksimum untuk berhenti menerima panggilan baru"
-
-#, fuzzy
-#~ msgid "Disable console colors"
-#~ msgstr "Matikan warna konsol"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Sound fail Direktori Cache"
-
-#, fuzzy
-#~ msgid "The Group to run as"
-#~ msgstr "Kumpulan untuk menjalankan sebagai"
-
-#, fuzzy
-#~ msgid "The User to run as"
-#~ msgstr "Pengguna untuk menjalankan sebagai"
-
-#, fuzzy
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Surat suara spool Direktori"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Awalan UniquID dengan nama sistem"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "Membangun transcode jalan melalui SLINEAR, tidak secara langsung"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Transmit SLINEAR keheningan ketika sedang merakam saluran"
-
-#, fuzzy
-#~ msgid "Verbose Level"
-#~ msgstr "Tingkat verbose"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Bahagian dial rencana"
-
-#~ msgid "include"
-#~ msgstr "memasukkan"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Ekstensi dial rencana"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Pilihan Umum Dialplan"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Membolehkan pemindahan"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Hapus variable global"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "Buka dial rencana"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Persidangan dial rencana"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Masa dial rencana"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Surat suara dial rencana"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Dial Zon untuk dial rencana"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "Prefix untuk menambah pencocokan dial rencana"
-
-#~ msgid "Match International prefix"
-#~ msgstr "Awalan Antarabangsa Match"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Awalan (0) untuk menambah / memadam ke / dari nombor antarabangsa"
-
-#~ msgid "localzone"
-#~ msgstr "zon tempatan"
-
-#~ msgid "Match plan"
-#~ msgstr "Rencana sesuai"
-
-#~ msgid "Connection to use"
-#~ msgstr "Sambungan yang digunakan"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Ciri-ciri kunci peta"
-
-#~ msgid "Attended transfer key"
-#~ msgstr "Mengikuti memindahkan kunci"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "kunci pemindahkan buta"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Kunci untuk Putus panggilan"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Kunci untuk Park panggilan"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Parkir Ciri-ciri"
-
-#~ msgid "ADSI Park"
-#~ msgstr "ADSI Park"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "Mengikuti pemindahan timeout (saat)"
-
-#~ msgid "One touch record key"
-#~ msgstr "Satu nota sentuh butang"
-
-#~ msgid "Name of call context for parking"
-#~ msgstr "Nama konteks panggilan untuk parkir"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Fail bunyi untuk memainkan ke pemanggil parkir"
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr "Maksimum masa (milidetik) antara nombor untuk pengaktifan ciri"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Kaedah untuk Menemukan slot Parkir"
-
-#~ msgid "parkedmusicclass"
-#~ msgstr "parkir muzik kelas"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Nada kebaikan yang dimainkan untuk"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Aktifkan Parkir"
-
-#~ msgid "Extension to dial to park"
-#~ msgstr "Extension untuk dial ke taman"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Parkir waktu (saat)"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "Rentang sambungan untuk parkir panggilan"
-
-#~ msgid "Pickup extension"
-#~ msgstr "Angkat sambungan"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Detik untuk menunggu antara nombor ketika memindahkan"
-
-#~ msgid "sound when attended transfer is complete"
-#~ msgstr "suara saat menghadiri pemindahan selesai"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "Suara saat menghadiri gagal transfer"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Beban kembali menatarajah peranti keras"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Kaedah Reboot"
-
-#~ msgid "Parameter"
-#~ msgstr "Parameter"
-
-#~ msgid "Option type"
-#~ msgstr "Pilihan jenis"
-
-#~ msgid "User name"
-#~ msgstr "Nama pemakai"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Pilihan Umum IAX"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Izinkan Codec"
-
-#~ msgid "Static"
-#~ msgstr "Statik"
-
-#~ msgid "Write Protect"
-#~ msgstr "Dilindungi Menulis"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Persidangan Meetme"
-
-#~ msgid "Admin PIN"
-#~ msgstr "PIN Admin"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "PIN Pertemuan"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Pilihan Umum Persidangan Meetme"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Jumlah buffer audio yang akan digunakan dalam 20 mili detik"
-
-#~ msgid "Modules"
-#~ msgstr "Modul"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Penggera Aplikasi Penerima"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Pengesahan Aplikasi"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "Membuat asterisk yakin tidak menyimpan CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Periksa sama ada saluran sedia"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Mendengar pada setiap saluran"
-
-#~ msgid "Control Playback Application"
-#~ msgstr "Kawalan Main Aplikasi"
-
-#~ msgid "Cuts up variables"
-#~ msgstr "Memotong pembolehubah"
-
-#~ msgid "Database access functions"
-#~ msgstr "fungsi untuk mengakses dasar data"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Aplikasi Panggilan"
-
-#~ msgid "Virtual Dictation Machine Application"
-#~ msgstr "Aplikasi Dikte Virtual Machine"
-
-#~ msgid "Directed Call Pickup Support"
-#~ msgstr "Sokongan Pengarah Angkatan Pangillan"
-
-#~ msgid "Extension Directory"
-#~ msgstr "Extension Direktori"
-
-#~ msgid "DISA (Direct Inward System Access) Application"
-#~ msgstr "Aplikasi DISA (Direct Inward System Access)"
-
-#~ msgid "Dump channel variables Application"
-#~ msgstr "Aplikasi membuang variable saluran"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Echo Aplikasi Mudah"
-
-#~ msgid "ENUM Lookup"
-#~ msgstr "Pencarian ENUM"
-
-#~ msgid "Reevaluates strings"
-#~ msgstr "Menilai semula string"
-
-#~ msgid "Executes applications"
-#~ msgstr "Menjalankan aplikasi"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "IVR aplikasi antara muka luaran"
-
-#~ msgid "Fork The CDR into 2 seperate entities"
-#~ msgstr "CDR garpu menjadi 2 entiti yang berasingan"
-
-#~ msgid "Get ADSI CPE ID"
-#~ msgstr "Dapatkan ADSI CPE ID"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Pengurusan Kumpulan Rutinitas"
-
-#~ msgid "Encode and Stream via icecast and ices"
-#~ msgstr "Menyandi dan Stream melalui icecast dan es"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Aplikasi Transmisi Gambar"
-
-#~ msgid "Look up Caller*ID name/number from black"
-#~ msgstr "Mencari nama / nombor Pemangil dari hitam"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr "Mencari Nama Pemangil dari database tempatan"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Makro Extension"
-
-#~ msgid "A simple math Application"
-#~ msgstr "Sebuah Aplikasi matematik senang"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "Aplikasi MD5 checksum"
-
-#~ msgid "Digital Milliwatt (mu-law) Test Application"
-#~ msgstr "Milliwatt digital (mu-law) Aplikasi Uji"
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Merakam panggilan dan campuran audio semasa rakaman"
-
-#~ msgid "Call Parking and Announce Application"
-#~ msgstr "Panggilan Parkir dan Aplikasi Pengumuman"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Aplikasi Pemain Trivial"
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Nombor telefon diperlukan untuk dimasuk"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "Panggilan antrian benar"
-
-#~ msgid "Random goto"
-#~ msgstr "Pergi ke random"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Aplikasi Baca Variabel"
-
-#~ msgid "Read in a file"
-#~ msgstr "Baca dalam fail"
-
-#~ msgid "Realtime Data Lookup/Rewrite"
-#~ msgstr "Masa benar mencari / menulis kembali data "
-
-#~ msgid "Trivial Record Application"
-#~ msgstr "Aplikasi Trivial Rakam"
-
-#~ msgid "Say time"
-#~ msgstr "Katakan masa"
-
-#~ msgid "Send DTMF digits Application"
-#~ msgstr "Aplikasi Hantar DTMF angka"
-
-#~ msgid "Send Text Applications"
-#~ msgstr "Aplikasi Kirim Mesej"
-
-#~ msgid "Set CallerID Application"
-#~ msgstr "Aplikasi menetapkan CallerID"
-
-#~ msgid "CDR user field apps"
-#~ msgstr "Aplikasi CDR bidang pengguna"
-
-#~ msgid "load => .so ; Set CallerID Name"
-#~ msgstr "beban => .so ; Menetapkan Nama CallerID"
-
-#~ msgid "Set RDNIS Number"
-#~ msgstr "Menetapkan Nombor RDNIS"
-
-#~ msgid "Set ISDN Transfer Capability"
-#~ msgstr "Menetapkan Kemampuan Transfer ISDN"
-
-#~ msgid "SMS/PSTN handler"
-#~ msgstr "Penangan SMS/PSTN"
-
-#~ msgid "Hangs up the requested channel"
-#~ msgstr "Menutup saluran yang diminta"
-
-#~ msgid "Stack Routines"
-#~ msgstr "Rutinitas Stack"
-
-#~ msgid "Generic System() application"
-#~ msgstr "Aplikasi Generic Sistem()"
-
-#~ msgid "Playback with Talk Detection"
-#~ msgstr "Putar dengan Pengesanan Bicara"
-
-#~ msgid "Interface Test Application"
-#~ msgstr "Aplikasi Antarmuka Test"
-
-#~ msgid "Transfer"
-#~ msgstr "Transfer"
-
-#~ msgid "TXTCIDName"
-#~ msgstr "Nama TXTCID"
-
-#~ msgid "Send URL Applications"
-#~ msgstr "Aplikasi Kirim URL"
-
-#~ msgid "Custom User Event Application"
-#~ msgstr "Aplikasi Acara Pengguna Tersuai"
-
-#~ msgid "Send verbose output"
-#~ msgstr "Kirim keluaran verbose"
-
-#~ msgid "Voicemail"
-#~ msgstr "Voicemail"
-
-#~ msgid "Waits until first ring after time"
-#~ msgstr "Menunggu waktu sampai setelah deringan pertama"
-
-#~ msgid "Wait For Silence Application"
-#~ msgstr "Aplikasi Tunggu Untuk Tenang"
-
-#~ msgid "While Loops and Conditional Execution"
-#~ msgstr "Sementara Loops dan Pelaksanaan bersyarat"
-
-#~ msgid "Comma Separated Values CDR Backend"
-#~ msgstr "Hujung belakang nilai-nilai dipisahkan koma CDR"
-
-#~ msgid "Customizable Comma Separated Values CDR Backend"
-#~ msgstr "Nilai-nilai dipisahkan koma CDR hujung belakang yang disesuaikan"
-
-#~ msgid "Asterisk Call Manager CDR Backend"
-#~ msgstr "Hujung belakang asterisk panggilan pengurus CDR "
-
-#~ msgid "MySQL CDR Backend"
-#~ msgstr "Hujung belakang MySQL CDR"
-
-#~ msgid "PostgreSQL CDR Backend"
-#~ msgstr "Hujung belakang PostgreSQL CDR"
-
-#~ msgid "SQLite CDR Backend"
-#~ msgstr "Hujung belakang SQLite CDR"
-
-#~ msgid "Agent Proxy Channel"
-#~ msgstr "Agen Proksi Saluran"
-
-#~ msgid "Option chan_iax2"
-#~ msgstr "Pilihan chan_iax2"
-
-#~ msgid "Local Proxy Channel"
-#~ msgstr "Saluran Proksi Tempatan"
-
-#~ msgid "Session Initiation Protocol (SIP)"
-#~ msgstr "Session Initiation Protocol (SIP)"
-
-#~ msgid "Adaptive Differential PCM Coder/Decoder"
-#~ msgstr "Adaptif Pengkamiran PCM Coder/Decoder"
-
-#~ msgid "GSM/PCM16 (signed linear) Codec Translation"
-#~ msgstr "GSM/PCM16 (ditandatangani linier) Codec Terjemahan"
-
-#~ msgid "Speex/PCM16 (signed linear) Codec Translator"
-#~ msgstr "Speex/PCM16 (ditandatangani linier) Codec Terjemahan"
-
-#~ msgid "Sun Microsystems AU format (signed linear)"
-#~ msgstr "Sun Microsystems AU format (ditandatangani linier)"
-
-#~ msgid "Asterisk Extension Language Compiler"
-#~ msgstr "Asterisk Sambungan Bahasa Compiler"
-
-#~ msgid "Text Extension Configuration"
-#~ msgstr "Teks Sambungan Tatarajah"
-
-#~ msgid "Loopback Switch"
-#~ msgstr "Loop Beralih Kembali"
-
-#~ msgid "MySQL Config Resource"
-#~ msgstr "MySQL menatarajah sumber daya"
-
-#~ msgid "ODBC Config Resource"
-#~ msgstr "ODBC tatarajah sumber daya"
-
-#~ msgid "PGSQL Module"
-#~ msgstr "Modul PGSQL"
-
-#~ msgid "Cryptographic Digital Signatures"
-#~ msgstr "tanda tangan digital kriptografi"
-
-#~ msgid "Call Parking Resource"
-#~ msgstr "Panggilan Parkir Sumber Daya"
-
-#~ msgid "Indications Configuration"
-#~ msgstr "Penunjuk Konfigurasi"
-
-#~ msgid "Call Monitoring Resource"
-#~ msgstr "panggilan pemantauan sumber daya"
-
-#~ msgid "Music On Hold Resource"
-#~ msgstr "Muzik Pada Sumber Daya Tahan"
-
-#~ msgid "ODBC Resource"
-#~ msgstr "Sumber ODBC"
-
-#~ msgid "SMDI Module"
-#~ msgstr "Modul SMDI"
-
-#~ msgid "SNMP Module"
-#~ msgstr "Modul SNMP"
-
-#~ msgid "Music On Hold"
-#~ msgstr "Muzik Di Tahan"
-
-#~ msgid "Application"
-#~ msgstr "Aplikasi"
-
-#~ msgid "Directory of Music"
-#~ msgstr "Direktori Muzik"
-
-#~ msgid "Option mode"
-#~ msgstr "Pilihan mod"
-
-#~ msgid "Random Play"
-#~ msgstr "Bermain Rawak"
-
-#~ msgid "DTMF mode"
-#~ msgstr "Mode DTMF"
-
-#~ msgid "Primary domain identity for From: headers"
-#~ msgstr "Domain utama identiti untuk Dari: header"
-
-#~ msgid "From user (required by many SIP providers)"
-#~ msgstr "Dari pengguna (diperlukan oleh banyak pembekal SIP)"
-
-#~ msgid "Ring on incoming dialplan contexts"
-#~ msgstr "Dering pada konteks rancangan panggilan masuk"
-
-#~ msgid "Allow Insecure for"
-#~ msgstr "Biarkan tidak selamat untuk"
-
-#~ msgid "Mailbox for MWI"
-#~ msgstr "Peti mel untuk MWI"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "NAT antara telefon dan asterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "Menyemak tag di header"
-
-#~ msgid "Reply Timeout (ms) for down connection"
-#~ msgstr "Balas Masa tamat (ms) untuk sambungan ke bawah"
-
-#~ msgid "Register connection"
-#~ msgstr "Register sambungan"
-
-#~ msgid "Dial own extension for mailbox"
-#~ msgstr "Dial perpanjangan sendiri untuk peti mel"
-
-#~ msgid "Client Type"
-#~ msgstr "Pelanggan Jenis"
-
-#~ msgid "Section sipgeneral"
-#~ msgstr "Bahagian sipgeneral"
-
-#~ msgid "Allow codecs"
-#~ msgstr "Membenarkan codec"
-
-#~ msgid "SIP realm"
-#~ msgstr "Dunia SIP"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "Pilihan umum Voicemail"
-
-#~ msgid "From Email address of server"
-#~ msgstr "Dari alamat email server"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "Kotak mail suara"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "Email mengandungi lampiran"
-
-#~ msgid "Display Name"
-#~ msgstr "Nama Paparan"
-
-#~ msgid "Password"
-#~ msgstr "Kata laluan"
-
-#~ msgid "zone"
-#~ msgstr "daerah"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Tetapan Zon Suara"
-
-#~ msgid "Message Format"
-#~ msgstr "Format Mesej"
diff --git a/po/ms/base.po b/po/ms/base.po
deleted file mode 100644
index 6117359..0000000
--- a/po/ms/base.po
+++ /dev/null
@@ -1,3593 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-05-07 17:57+1000\n"
-"PO-Revision-Date: 2010-05-07 17:57+1000\n"
-"Last-Translator: Wai Chet Teow <waichet@hotmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-msgid "(%s available)"
-msgstr "(%s sedia)"
-
-msgid "(empty)"
-msgstr ""
-
-msgid "(no interfaces attached)"
-msgstr "(tiada interface dipasang)"
-
-msgid "-- Additional Field --"
-msgstr "-- Gelanggang Tambahan --"
-
-msgid "-- Please choose --"
-msgstr "-- Sila pilih --"
-
-msgid "-- custom --"
-msgstr "-- memperibadi --"
-
-msgid "1 Minute Load:"
-msgstr ""
-
-msgid "15 Minute Load:"
-msgstr ""
-
-msgid "40MHz 2nd channel above"
-msgstr ""
-
-msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr ""
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"<abbr title=\"perkhidmatan set mengenalpasti diperpanjangkan\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "IPv4-Alamat"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "IPv4-Pintu gerbang"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "IPv4-Netmask"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr "IPv6 Host-Alamat atau Rangkaian (CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "IPv6-Pintu gerbang"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Konfigurasi lampu LED"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "MAC-Alamat"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr "AR-Penyokong"
-
-msgid "ARP retry threshold"
-msgstr ""
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr "Pusat akses"
-
-msgid "Action"
-msgstr "Aksi"
-
-msgid "Actions"
-msgstr "Aksi"
-
-msgid "Activate this network"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Aktive IPv4-Routen"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Aktif IPv6-Laluan"
-
-msgid "Active Connections"
-msgstr "Sambungan Aktif"
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Tambah"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr ""
-
-msgid "Additional Hosts files"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr "Pentadbiran"
-
-msgid "Advanced Settings"
-msgstr "Tetapan Lanjutan"
-
-msgid "Advertise IPv6 on network"
-msgstr ""
-
-msgid "Advertised network ID"
-msgstr ""
-
-msgid "Alert"
-msgstr ""
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "Membenarkan pengesahan kata laluan SSH"
-
-msgid "Allow all except listed"
-msgstr "Izinkan semua kecualian yang disenaraikan"
-
-msgid "Allow listed only"
-msgstr "Izinkan senarai saja"
-
-msgid "Allow localhost"
-msgstr ""
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr "Antena 1"
-
-msgid "Antenna 2"
-msgstr "Antena 2"
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr "Melaksanakan"
-
-msgid "Applying changes"
-msgstr "Melaksanakan perubahan"
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr "Associated Stesen"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr "Authentifizierung"
-
-msgid "Authoritative"
-msgstr "Pengesahan"
-
-msgid "Authorization Required"
-msgstr "Otorisasi Diperlukan"
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr "Boleh didapati"
-
-msgid "Available packages"
-msgstr ""
-
-msgid "Average:"
-msgstr ""
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr ""
-
-msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr "Kembali ke ikhtisar"
-
-msgid "Back to scan results"
-msgstr "Kembali ke keputusan scan"
-
-msgid "Background Scan"
-msgstr "Latar Belakang Scan"
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr "Sandaran / Mengembalikan"
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr ""
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr "Bridge"
-
-msgid "Bridge interfaces"
-msgstr "Antara Muka Bridge"
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr "Butang"
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr "Penggunaan CPU (%)"
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr "Batal"
-
-msgid "Chain"
-msgstr "Rantai"
-
-msgid "Changes"
-msgstr "Laman"
-
-msgid "Changes applied."
-msgstr "Laman diterapkan."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-
-msgid "Channel"
-msgstr "Saluran"
-
-msgid "Check"
-msgstr ""
-
-msgid "Checksum"
-msgstr "Jumlah disemak "
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr "Pilih zon firewall yang anda ingin tetapkan untuk antar muka ini."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-#, fuzzy
-msgid "Client"
-msgstr "Pelanggan"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr "Perintah"
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr "Mampatan"
-
-msgid "Configuration"
-msgstr "Konfigurasi"
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr "Pengesahan"
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr "Sambungan Batas"
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr "Kod negara"
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr "Buat / Menetapkan dinding api-zon"
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr "Mengkustomisasi perilaku peranti LED jika mungkin."
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr "DHCP-Pilihan"
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr "Padam"
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr "Keterangan"
-
-msgid "Design"
-msgstr "Disain"
-
-msgid "Destination"
-msgstr "Tempat tujuan"
-
-msgid "Device"
-msgstr "Alat"
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "Mematikan pemasa HW-Beacon"
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr "Jarak Optimasi"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Jarak ke rangkaian terjauh ahli dalam meter."
-
-msgid "Diversity"
-msgstr "Keanekaragaman"
-
-# Nur für NAT-Firewalls?
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq adalah gabungan <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Pelayan dan<abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder untuk <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewall"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr "Jangan menghantar jawapan penyelidikan"
-
-msgid "Domain required"
-msgstr "Domain diperlukan"
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr "Jangan hantar permintaan DNS tanpa nama DNS"
-
-msgid "Download and install package"
-msgstr "Turun dan memasang pakej"
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear menawarkan SSH kulit rangkaian aksesdan pelayan yang terintegrasi."
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr "Dinamik DHCP"
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr "EAP-Kaedah"
-
-msgid "Edit"
-msgstr "Sunting"
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Mengaktifkan <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Aktifkan spanning Tree Protokol di jambatan ini"
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr "Enkripsi"
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr "Kesalahan"
-
-msgid "Ethernet Adapter"
-msgstr "Ethernet Adapter"
-
-msgid "Ethernet Switch"
-msgstr "Ethernet Beralih"
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "Frame Cepat"
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr "Fail Sistem"
-
-msgid "Filter"
-msgstr "Penapis"
-
-msgid "Filter private"
-msgstr "Penapis swasta"
-
-msgid "Filter useless"
-msgstr "Penapis tak berguna"
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr "Cari pakej"
-
-msgid "Finish"
-msgstr "Selesai"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr "Tetapan Firewall"
-
-msgid "Firewall Status"
-msgstr "Status Firewall"
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr "Parameter"
-
-msgid "Flash Firmware"
-msgstr "Firmware Flash"
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr "Paksa"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr "Fragmentasi Ambang"
-
-msgid "Frame Bursting"
-msgstr "Bingkai Meletup"
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr "Melompat Frekuensi"
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr "Setup Umum"
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr "Menuju ke halaman konfigurasi yang relevan"
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr "Kawalan"
-
-msgid "Hang Up"
-msgstr "Menutup"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Di sini anda boleh mengkonfigurasi aspek asas peranti anda seperti nama host "
-"atau zon."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Menyembunyikan ESSID"
-
-msgid "Host entries"
-msgstr "Entri host"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "IP host atau rangkaian"
-
-msgid "Hostname"
-msgstr "Nama Host"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr "Nama Host"
-
-msgid "IP address"
-msgstr "Alamat IP"
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr "Konfigurasi IPv6"
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Identiti"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Jika memori fizikal anda tidak cukup data yang boleh digunakan sementara "
-"menukar ke peranti-penukar yang dihasilkan dalam jumlah RAM berguna yang "
-"lebih tinggi. Berhati-hatilah bahawa penukaran data adalah proses yang "
-"sangat lambat kerana peranti-penukar tidak boleh diakses dengan datarates "
-"yang tinggi pada RAM."
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr "Abaikan antara muka"
-
-msgid "Ignore resolve file"
-msgstr "Abaikan fail yang selesai"
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr "Masuk"
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr ""
-
-msgid "Initscripts"
-msgstr ""
-
-msgid "Install"
-msgstr "Memasang"
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interface"
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr "Tak Sah"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Username dan / atau password tak sah! Sila cuba lagi."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Tampak bahawa anda cuba untuk flash fail gambar yang tidak sesuai dengan "
-"memori flash, sila buat pengesahan pada fail gambar!"
-
-msgid "Java Script required!"
-msgstr ""
-
-#, fuzzy
-msgid "Join Network"
-msgstr "Gabung Rangkaian"
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr "Log Kernel"
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr "Kunci"
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr "Tamatkan"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr "Bahasa"
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr "Sewa fail"
-
-msgid "Leasetime"
-msgstr "Masa penyewaan"
-
-msgid "Leasetime remaining"
-msgstr "Sisa masa penyewaan"
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr "Batas"
-
-msgid "Link On"
-msgstr "Link Pada"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "Load"
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Masa Tempatan"
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr "Soalan tempatan"
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr "Log soalan"
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr "Login"
-
-msgid "Logout"
-msgstr "Logout"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr "Penapis alamat MAC"
-
-msgid "MAC-Filter"
-msgstr "Penapis MAC"
-
-msgid "MAC-List"
-msgstr "Senarai MAC"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr "Rate Maksimum"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-#, fuzzy
-msgid "Maximum hold time"
-msgstr "Memegang masa maksimum"
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memori"
-
-msgid "Memory usage (%)"
-msgstr "Penggunaan Memori (%)"
-
-msgid "Metric"
-msgstr "Metrik"
-
-msgid "Minimum Rate"
-msgstr "Rate Minimum"
-
-#, fuzzy
-msgid "Minimum hold time"
-msgstr "Memegang masa minimum"
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Mode"
-
-msgid "Modem device"
-msgstr "Alat modem"
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr "Mount Point"
-
-msgid "Mount Points"
-msgstr "Mount Points"
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Mount Points menentukan di mana titik peranti memori akan melekat pada fail "
-"sistem"
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr "Mounted fail sistems"
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr "Multicast Rate"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Nama"
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr "Nama rangkaian baru"
-
-msgid "Navigation"
-msgstr "Navigation"
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "Rangkaian"
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr "Kemudian »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr "Tiada rantai dalam jadual ini"
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr "Tidak ada peraturan dalam rantai ini"
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr "Kebisingan"
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "Baik"
-
-msgid "OPKG-Configuration"
-msgstr "OPKG-Konfigurasi"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Pada halaman ini anda boleh mengkonfigurasi antara muka rangkaian. Anda "
-"boleh menjembatani beberapa antara muka dengan menanda jambatan antara muka "
-"gelanggang dan masukkan beberapa nama antara muka rangkaian dipisahkan "
-"dengan ruang. Anda juga boleh menggunakan antara muka VLAN notasi. Seperti "
-"eth0.1."
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr "Pilihan"
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr "Keluar"
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr "Saluran Outdoor"
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "Keseluruhan"
-
-msgid "Owner"
-msgstr "Pemilik"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr "Pengkapsulan PPPoA"
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "Nama pakej"
-
-msgid "Packets"
-msgstr "Paket"
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr "Kata laluan"
-
-msgid "Password authentication"
-msgstr "Kata laluan pengesahan"
-
-msgid "Password of Private Key"
-msgstr "Kata Laluan Kunci Swasta"
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr "Path ke CA-Sijil"
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "Path ke Kunci Swasta"
-
-msgid "Path to executable which handles the button event"
-msgstr "Path ke eksekusi yang mengendalikan acara butang"
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr "Lakukan reboot"
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr "Tetapan Fizikal"
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr "Pkts."
-
-msgid "Please enter your username and password."
-msgstr "Sila masukkan username dan kata laluan anda."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Sila tunggu: Peranti sedang reboot..."
-
-msgid "Policy"
-msgstr "Dasar"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr "Mencegah komunikasi sesama Pelanggan"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Teruskan"
-
-msgid "Processes"
-msgstr "Proses"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protokol"
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS-Ambang"
-
-# Ein / Aus, eingehend / ausgehend?
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr "Baca /etc/ethers untuk mengkonfigurasikan DHCP-Server"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Reboot"
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr "Reboot sistem operasi peranti anda"
-
-msgid "Receive"
-msgstr "Menerima"
-
-msgid "Receiver Antenna"
-msgstr "Antena Penerima"
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr "Rujukan"
-
-msgid "Regulatory Domain"
-msgstr "Peraturan Domain"
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr "Menghapuskan"
-
-msgid "Repeat scan"
-msgstr "Ulangi scan"
-
-msgid "Replace entry"
-msgstr "Tukar entri"
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Reset"
-
-msgid "Reset Counters"
-msgstr "Reset Loket"
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr "Restart Firewall"
-
-msgid "Restore backup"
-msgstr "Kembalikan sandaran"
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr "Kembali"
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr "Laluan"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Laluan menentukan di mana interface dan gateway host atau rangkaian tertentu "
-"yang boleh dicapai."
-
-msgid "Rule #"
-msgstr "Peraturan #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Simpan"
-
-msgid "Save & Apply"
-msgstr "Simpan & Melaksanakan"
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr "Scan"
-
-msgid "Scheduled Tasks"
-msgstr "Tugas Jadual"
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr "Rujuk \"mount\" laman manual untuk detail"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr "Pisahkan Pelanggan"
-
-msgid "Separate WDS"
-msgstr "Pisahkan WDS"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "Perkhidmatan"
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr "Isyarat"
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr "Saiz"
-
-msgid "Skip"
-msgstr "Skip"
-
-msgid "Skip to content"
-msgstr "Skip ke kadar"
-
-msgid "Skip to navigation"
-msgstr "Skip ke navigation"
-
-msgid "Slot time"
-msgstr "Slot masa"
-
-msgid "Software"
-msgstr "Perisian"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr "Sumber"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-#, fuzzy
-msgid "Specifies the button state to handle"
-msgstr "Menentukan state butang untuk melaku"
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr "Mula"
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr "Laluan IPv4 Statik"
-
-msgid "Static IPv6 Routes"
-msgstr "Laluan IPv6 Statik"
-
-msgid "Static Leases"
-msgstr "Statische Einträge"
-
-msgid "Static Routes"
-msgstr "Laluan Statik"
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr "Order Ketat"
-
-msgid "Submit"
-msgstr "Menyerahkan"
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr "Beralih"
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr "Sistem"
-
-msgid "System Log"
-msgstr "Log Sistem"
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-# same as RX
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr "Meja"
-
-msgid "Target"
-msgstr "Sasaran"
-
-msgid "Terminate"
-msgstr "Menamatkan"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Karakter yang diizinkan adalah: <code>A-Z</code>, <code>a-z</code>, "
-"<code>0-9</code> dan <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr "Fail peranti memori atau partisyen, (contohnya: /dev/sda)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr "Failsistem yang digunakan untuk memformat memori (contohnya: ext3)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Fail gambar flash telah di-upload. Berikut ini adalah checksum dan saiz fail "
-"yang berdaftar, membandingkannya dengan fail gambar asli untuk memastikan "
-"integriti data.<br /> Klik butang terus di bawah untuk memulakan prosedur "
-"flash."
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr "Laman berikut telah kembali"
-
-msgid "The following rules are currently active on this system."
-msgstr "Peraturan berikut sedang aktif pada sistem ini."
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"Sistem ini sekarang mula flash.<br /> JANGAN TUTUP KUASA UNTUK PERANTI!<br /"
-"> Tunggu beberapa minit sehingga anda cuba untuk menyambung kembali. Mungkin "
-"anda perlu mengemas kini alamat komputer anda untuk mencapai peranti lagi, "
-"bergantung pada tetapan anda."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"Format Fail gambar yang diupload tidak disokongkan. Pastikan anda memilih "
-"fail format gambar yang generik untuk platform anda."
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr "Ini adalah DHCP hanya dalam rangkaian tempatan."
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Ini adalah crontab sistem di mana tugas-tugas yang dijadualkan boleh "
-"ditakrifkan."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Senarai ini memberikan gambaran lebih pada proses sistem yang sedang "
-"berjalan dan statusnya."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "Laman ini membolehkan konfigurasi butang tindakan peribadi"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Laman ini memberikan gambaran lebih dari saat ini sambungan rangkaian yang "
-"aktif."
-
-msgid "This section contains no values yet"
-msgstr "Bahagian ini belum mengandungi nilai-nilai lagi"
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Zon masa"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "Lalu lintas"
-
-msgid "Transfer"
-msgstr "Pemindahan"
-
-msgid "Transmission Rate"
-msgstr "Kelajuan Penghantaran"
-
-msgid "Transmit"
-msgstr "Pancar"
-
-msgid "Transmit Power"
-msgstr "Daya Pancar"
-
-msgid "Transmitter Antenna"
-msgstr "Antena Pemancar"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "Mod Turbo"
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr "Jenis"
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Perubahan yang belum disimpan"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr "Uploaded Fail"
-
-msgid "Uptime"
-msgstr "Masa Aktif"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Guna /etc/ethers"
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Diguna"
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr "Username"
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "Versi"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr "WMM Mod"
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA-Enkripsi memerlukan pemohan wpa (untuk mod pelanggan) atau hostapd "
-"(untuk AP dan mod ad-hoc) yang akan dipasangkan."
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Amaran: Ada perubahan yang belum disimpan akan hilang saat reboot!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr "Adapter Wayarles"
-
-msgid "Wireless Network"
-msgstr "Rangkaian Wayarles"
-
-msgid "Wireless Overview"
-msgstr "Gambaran keseluruhan Wayarles"
-
-msgid "Wireless Security"
-msgstr "Keselamatan WLAN"
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr "Sokongan XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "mencipta jambatan di antara muka tertentu"
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "mematikan"
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr "fail dimana DHCP-sewa akan disimpan"
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "Membantu"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "jika target itu ialah rangkaian"
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "Fail DNS tempatan"
-
-msgid "no"
-msgstr ""
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "tidak ada"
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr ""
-
-msgid "unspecified"
-msgstr ""
-
-msgid "unspecified -or- create:"
-msgstr "Tidak dirinci -atau- buat:"
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr ""
-
-msgid "« Back"
-msgstr "« Kembali"
-
-#~ msgid "Active Leases"
-#~ msgstr "Penyewaan Aktif"
-
-#~ msgid "MAC"
-#~ msgstr "Alamat MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Disulitkan\">Vers.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "WLAN-Scan"
-
-#~ msgid "Create Network"
-#~ msgstr "Buat Jaringan"
-
-#~ msgid "Link"
-#~ msgstr "Link"
-
-#~ msgid "Networks"
-#~ msgstr "Rangkaian"
-
-#~ msgid "Power"
-#~ msgstr "Daya"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Rangkaian wifi di lingkungan tempatan"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr "CIDR-Notation: Adresse/Prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "DNS-Server"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "IPv4-Siaran"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "IPv6-Alamat"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Setup IPv6"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Rangkaian port pada router anda boleh digabungkan untuk beberapa VLAN di "
-#~ "mana komputer dapat berkomunikasi secara langsung dengan satu sama lain. "
-#~ "VLAN sering digunakan untuk memisahkan segmen rangkaian yang berbeza. "
-#~ "Seringkali ada secara default satu port Uplink untuk sambungan kepada "
-#~ "rangkaian yang lebih besar seterusnya seperti internet dan port lain "
-#~ "untuk rangkaian tempatan."
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Fail yang akan disimpan saat flash firmware baru"
-
-#~ msgid "General"
-#~ msgstr "Umum"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr "Di sini anda boleh melaraskan tetapan dan fungsi Luci"
-
-#~ msgid "Post-commit actions"
-#~ msgstr "UCI-komit tindakan"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Perintah-perintah ini akan dijalankan secara automatik apabila tatarajah "
-#~ "UCI diberikan komited membolehkan perubahan yang akan diterapkan langsung."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Antarmuka pengguna Web"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Pusat akses (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Pilihan Tambahan Pppd"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Pemutusan automatik"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Arkib Sandaran"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Mengkonfigurasi pelayan DNS tempatan untuk menggunakan pelayan nama "
-#~ "diiklan oleh rakan PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Menyambung script"
-
-#~ msgid "Create backup"
-#~ msgstr "Buat Sandaran"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Putuskan naskah"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Edit senarai pakej dan target pemasangan"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Aktifkan IPv6 di PPP link"
-
-#~ msgid "Firmware image"
-#~ msgstr "Gambar Firmware"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Di sini anda boleh sandaran dan mengembalikan konfigurasi router dan - "
-#~ "jika mungkin - Reset router ke tetapan lalai."
-
-#~ msgid "Installation targets"
-#~ msgstr "Target pemasangan"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Simpan fail konfigurasi"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Biarkan pppd menggantikan laluan asal saat ini untuk menggunakan "
-#~ "antaramuka PPP selepas berjaya menyambung"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "Biarkan pppd menjalankan naskah ini setelah menetapkan link PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Biarkan pppd menjalankan naskah ini sebelum menghancurkan link PPP"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Pastikan bahawa anda mempunyai kod pin yang sah. Kalau tidak anda mungkin "
-#~ "akan terkunci kad sim anda!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "Kebanyakan dari mereka adalah pelayan rangkaian, yang menawarkan "
-#~ "perkhidmatan tertentu untuk peranti anda atau rangkaian seperti akses "
-#~ "shell, melayani laman web seperti LuCI, melakukan mesh routing, "
-#~ "menghantar e-mel, dan lain-lain"
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Jumlah ujian sambungan gagal sebelum memulakan semula sambungan automatik"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN-Code"
-
-#~ msgid "PPP Settings"
-#~ msgstr "Tetapan PPP"
-
-#~ msgid "Package lists"
-#~ msgstr "Senarai pakej"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Teruskan mengembalikan semua tatacara dan ulang ke firmware asal?"
-
-#~ msgid "Processor"
-#~ msgstr "Processor"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-Port"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-Server"
-
-#~ msgid "Replace default route"
-#~ msgstr "Tukar laluan asal"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Reset router ke tetapan lalai"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Detik untuk menunggu modem bersedia sebelum mencuba untuk menyambung"
-
-#~ msgid "Service type"
-#~ msgstr "Jenis Perkhidmatan"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr ""
-#~ "Perkhidmatan dan daemon melakukan tugas tertentu dalam peranti anda."
-
-#~ msgid "Settings"
-#~ msgstr "Tetapan"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Menetapkan masa menunggu"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Maafkan. OpenWRT tidak menyokong meningkatkan sistem pada peron ini. <br /"
-#~ ">Anda perlu flash peranti anda secara manual."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Tentukan arahan tambahan untuk pppd di sini"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "Node peranti modem anda, contohnya /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr ""
-#~ "Waktu (dalam detik) selepas mana sambungan yang tidak terpakai akan "
-#~ "ditutup"
-
-#~ msgid "Update package lists"
-#~ msgstr "Mengemas kini senarai pakej"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Upload fail gambar OpenWRT untuk flash semula peranti."
-
-#~ msgid "Upload image"
-#~ msgstr "Upload fail gambar"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Guna rakan DNS"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Anda perlu memasang \"comgt\" untuk UMTS/GPRS, \"ppp-mod-pppoe\" untuk "
-#~ "PPPoE, \"ppp-mod-pppoa\" untuk PPPoA atau \"pptp\" untuk sokongan PPtP"
-
-#~ msgid "back"
-#~ msgstr "kembali"
-
-#~ msgid "buffered"
-#~ msgstr "buffer"
-
-#~ msgid "cached"
-#~ msgstr "cache"
-
-#~ msgid "free"
-#~ msgstr "Membebaskan"
-
-#~ msgid "static"
-#~ msgstr "statik"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "Luci adalah kumpulan perisian bebas Lua termasuk MVC-Kerangka dan muka "
-#~ "web untuk peranti embedded. LuCI di lesen Lesen Apache."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "SSH-Kunci"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Sebuah webserver HTTP/1.1 ringan ditulis dalam C dan Lua direka untuk "
-#~ "melayani Luci"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Sebuah webserver kecil yang boleh digunakan untuk melayani muka "
-#~ "Konfigurasi Lua LuCI"
-
-#~ msgid "About"
-#~ msgstr "Tentang"
-
-#~ msgid "Addresses"
-#~ msgstr "Alamat"
-
-#~ msgid "Admin Password"
-#~ msgstr "Kata Laluan Admin"
-
-#~ msgid "Alias"
-#~ msgstr "Alias"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Anmeldeaufforderung"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Bridge Port"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "Mengubah kata laluan sistem pentadbir (User \"root\")"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Pelanggan + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "fail konfigurasi"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Sambungan timeout"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Menyumbang Pengembang"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP ditugaskan"
-
-#~ msgid "Document root"
-#~ msgstr "Dokumen root"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Aktifkan Keep-Alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Jambatan Ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr "Di sini anda boleh memasukkan kunci awam SSH untuk pengesahan."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Konfigurasi IP"
-
-#~ msgid "Interface Status"
-#~ msgstr "Status Interface"
-
-#~ msgid "Lead Development"
-#~ msgstr "Pemimpin Pengembangan"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "Belum dikonfigurasikan"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Kata laluan berjaya ditukar"
-
-#~ msgid "Plugin path"
-#~ msgstr "Tunjuk locasi Plugin"
-
-#~ msgid "Ports"
-#~ msgstr "Ports"
-
-#~ msgid "Primary"
-#~ msgstr "Primary"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Tapak Web Projek"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo-Ad-Hoc (Atheros)"
-
-#~ msgid "STP"
-#~ msgstr "Spanning-Tree-Protokol"
-
-#~ msgid "Thanks To"
-#~ msgstr "Terima Kasih kepada"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "Wilayah yang akan dipaparkan di pengesahan prompt untuk laman yang "
-#~ "dilindungi."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Kesalahan tidak diketahui"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "defaultnya <code>/etc/httpd.conf</code>"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG kod kesalahan %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Senarai pakej dikemaskini"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Mengemas kini pakej dipasang"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "kernel atau perkhidmatan logfiles yang juga dapat dilihat di sini untuk "
-#~ "mendapatkan gambaran atassituasi kini."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Di sini anda dapat mencari maklumat tentang sistem saat ini status "
-#~ "seperti frekuensi masa CPU, penggunaan memori atau antara muka rangkaian "
-#~ "data."
-
-#~ msgid "Search file..."
-#~ msgstr "Cari fail ..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "LuCI adalah percuma, fleksibel, dan mempunyai muka pengguna grafik yang "
-#~ "ramah untuk mengkonfigurasikan OpenWRT Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "Nikmati router anda!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Kami ingin selalu memperbaiki interface ini, kita berharap memperolehi "
-#~ "tanggapan dan cadangan anda"
-
-#~ msgid "Hello!"
-#~ msgstr "Halo!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Perhatikan: Pada perubahan Luci harus disahkan dengan mengklik Laman - "
-#~ "Simpan &amp; terap sebelum perubahan diterapkan"
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "Pada halaman berikut, anda boleh menetapkan semua tatacara penting dari "
-#~ "router anda."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "Pasukan LuCI"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr "Ini adalah wilayah pentadbiran LuCI."
-
-#~ msgid "User Interface"
-#~ msgstr "Antara muka pengguna"
-
-#~ msgid "enable"
-#~ msgstr "membolehkan"
-
-#~ msgid "(hidden)"
-#~ msgstr "(tersembunyi)"
-
-#~ msgid "(optional)"
-#~ msgstr "(pilihan)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "DNS-Port"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "DNS-Pelayan akan dipertanyakan pada urutan menyelesaikan jumlah fail"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr "maksimum DHCP untuk disewa"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "maksimum <abbr title=\"Mekanisme perpanjangan untuk DNS\">EDNS.0</abbr> "
-#~ "saiz paket"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP-Isolasi"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Tambah rangkaian Wifi ke rangkaian fizikal"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Attach to existing network"
-#~ msgstr "Lampir rangkaian yang ada"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Saiz Klip Segmen"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Buat Atau Lampir Rangkaian"
-
-#~ msgid "DHCP"
-#~ msgstr "DHCP"
-
-#~ msgid "Devices"
-#~ msgstr "Alat"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Jangan hantar reverse lookup untuk rangkaian tempatan"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Aktifkan Tftp Server"
-
-#~ msgid "Errors"
-#~ msgstr "Kesalahan"
-
-#~ msgid "Essentials"
-#~ msgstr "Keperluan"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Memperluaskan Host"
-
-#~ msgid "First leased address"
-#~ msgstr "Alamat sewaan pertama"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Perbaikan masalah hubungan dengan laman web, menghantar bentuk atau "
-#~ "lainnya perilaku ISP yang tak terduga."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Alamat Peranti"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Di sini anda boleh mengkonfigurasi peranti wifi dipasang."
-
-#~ msgid ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-#~ msgstr ""
-#~ "Jika antara muka dipasang ke rangkaian yang ada akan dijembatani kepada "
-#~ "antara muka yang ada dan ditutupi oleh zon firewall dari rangkaian yang "
-#~ "dipilih. Hapus tanda pada pilihan untuk menentukan melampirkan rangkaian "
-#~ "mandiri baru untuk antara muka ini."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Mengabaikan /etc/hosts"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "(Ad-Hoc) Tersendiri"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Sambungan Internet"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Gabung dengan (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Penyewaan"
-
-#~ msgid "Local Domain"
-#~ msgstr "Domain Tempatan"
-
-#~ msgid "Local Network"
-#~ msgstr "Rangkaian Tempatan"
-
-#~ msgid "Local Server"
-#~ msgstr "Server Tempatan"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Boot fail gambar rangkaian"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr "Nama Rangkaian (ESSID)"
-
-#~ msgid "Network to attach interface to"
-#~ msgstr "Rangkaian untuk melampirkan antara muka ke"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Jumlah alamat disewakan"
-
-#~ msgid "Path"
-#~ msgstr "Path"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Lakukan Tindakan"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Mencegah komunikasi sesama Pelanggan"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Menyediakan (Access Point)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Resolvfail"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "TFTP-Server Root"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Laman berikut telah dilaksanakan"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Ketika flash firmware baru dengan LuCI semua fail akan ditambah ketika "
-#~ "pemasangan firmware baru."
-
-#~ msgid "Wireless Scan"
-#~ msgstr "WLAN-Scan"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Dengan rangkaian <abbr title=\"Dynamic Host Configuration Protocol"
-#~ "\">DHCP</abbr> ahli boleh menerima tetapan rangkaian Alamat-<abbr title="
-#~ "\"Internet Protocol\">IP</abbr>, Awalan, Pelayan-<abbr title=\"Domain "
-#~ "Name System\">DNS</abbr>, dan lain-lain secara automatik"
-
-#~ msgid ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-#~ msgstr ""
-#~ "Anda akan menyertai rangkaian wayarles <em><strong>%s</strong></em>.Untuk "
-#~ "melengkapkan proses, anda perlu memberi beberapa butiran tambahan."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Anda boleh menjalankan beberapa rangkaian wifi dengan satu peranti. Perlu "
-#~ "diketahui bahawa ada peranti keras tertentu dan sekatan driverspecific. "
-#~ "Biasanya anda boleh beroperasi 1 Ad-Hoc atau sampai dengan 3 Master-Mode "
-#~ "dan 1 Client-Mode rangkaian secara serentak."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Anda perlu memasang \"ppp-mod-pppoe\" untuk PPPoE atau \"pptp\" untuk "
-#~ "sokongan PPtP"
-
-#~ msgid ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-#~ msgstr ""
-#~ "Anda perlu memasang <a href='%s'><em>pemohan-wpa</em></a> untuk "
-#~ "menggunakan WPA!"
-
-#~ msgid ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-#~ msgstr ""
-#~ "Anda perlu memasang pemohan <a href='%s'>Broadcom <em>nas</em> untuk "
-#~ "menggunakan WPA!"
-
-#~ msgid "Zone"
-#~ msgstr "Zon"
-
-#~ msgid "additional hostfile"
-#~ msgstr "tambahan hostfail"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "Menambah nama domain ke hostentries di resolv fail"
-
-#~ msgid "automatic"
-#~ msgstr "automatik"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "menyambung semula secara automatik"
-
-#~ msgid "concurrent queries"
-#~ msgstr "konkuren query"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr "mematikan DHCP untuk antara muka ini"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "menamatkan sambungan apabila diam selama"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "jangan cache yang tidak diketahui"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr "menapis soalan-DNS yang tidak berguna untuk Windows-sistem"
-
-#~ msgid "installed"
-#~ msgstr "dipasang"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "Menempatkan nama host yang bergantung pada subnetnya"
-
-#~ msgid "manual"
-#~ msgstr "manual"
-
-#~ msgid "not installed"
-#~ msgstr "tidak dipasang"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr "mencegah caching untuk balasan negatif dari DNS"
-
-#~ msgid "query port"
-#~ msgstr "penyoalan port"
-
-#~ msgid "transmitted / received"
-#~ msgstr "dihantar / diterima"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "Gabung rangkaian"
-
-#~ msgid "all"
-#~ msgstr "semua"
-
-#~ msgid "Code"
-#~ msgstr "Kod"
-
-#~ msgid "Distance"
-#~ msgstr "Jarak"
-
-#~ msgid "Legend"
-#~ msgstr "Legenda"
-
-#~ msgid "Library"
-#~ msgstr "Perpustakaan"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "Rujuk &#39;%s&#39; manpage"
-
-#~ msgid "Package Manager"
-#~ msgstr "Pengurus-Paket"
-
-#~ msgid "Service"
-#~ msgstr "Servis"
-
-#~ msgid "Statistics"
-#~ msgstr "Statistik"
-
-#~ msgid "zone"
-#~ msgstr "Zon"
diff --git a/po/ms/commands.po b/po/ms/commands.po
deleted file mode 100644
index 6fbb983..0000000
--- a/po/ms/commands.po
+++ /dev/null
@@ -1,90 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/ms/coovachilli.po b/po/ms/coovachilli.po
deleted file mode 100644
index d910ef2..0000000
--- a/po/ms/coovachilli.po
+++ /dev/null
@@ -1,22 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "CoovaChilli"
-msgstr ""
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
diff --git a/po/ms/ddns.po b/po/ms/ddns.po
deleted file mode 100644
index 5c584fb..0000000
--- a/po/ms/ddns.po
+++ /dev/null
@@ -1,87 +0,0 @@
-# Generated from applications/luci-ddns/luasrc/model/cbi/ddns/ddns.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2010-04-02 13:44+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Check for changed IP every"
-msgstr ""
-
-msgid "Check-time unit"
-msgstr ""
-
-msgid "Custom update-URL"
-msgstr ""
-
-msgid "Dynamic DNS"
-msgstr ""
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr ""
-
-msgid "Force-time unit"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source of IP address"
-msgstr ""
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/ms/diag_core.po b/po/ms/diag_core.po
deleted file mode 100644
index 90fefc5..0000000
--- a/po/ms/diag_core.po
+++ /dev/null
@@ -1,29 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/ms/diag_devinfo.po b/po/ms/diag_devinfo.po
deleted file mode 100644
index 27d2b46..0000000
--- a/po/ms/diag_devinfo.po
+++ /dev/null
@@ -1,205 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/ms/ffwizard.po b/po/ms/ffwizard.po
deleted file mode 100644
index 6217b8f..0000000
--- a/po/ms/ffwizard.po
+++ /dev/null
@@ -1,158 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/ms/firewall.po b/po/ms/firewall.po
deleted file mode 100644
index 545a4c0..0000000
--- a/po/ms/firewall.po
+++ /dev/null
@@ -1,428 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr ""
-
-msgid "Destination port"
-msgstr ""
-
-msgid "Destination zone"
-msgstr ""
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr ""
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr ""
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr ""
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr ""
-
-msgid "Internal port"
-msgstr ""
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr ""
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr ""
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-msgid "Source IP address"
-msgstr ""
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid "Source port"
-msgstr ""
-
-msgid "Source zone"
-msgstr ""
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr ""
-
-msgid "accept"
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr ""
diff --git a/po/ms/freifunk-policyrouting.po b/po/ms/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/ms/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/ms/freifunk.po b/po/ms/freifunk.po
deleted file mode 100644
index f3e9e94..0000000
--- a/po/ms/freifunk.po
+++ /dev/null
@@ -1,385 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/ms/hd_idle.po b/po/ms/hd_idle.po
deleted file mode 100644
index 7facf69..0000000
--- a/po/ms/hd_idle.po
+++ /dev/null
@@ -1,47 +0,0 @@
-# Generated from applications/luci-hd-idle/luasrc/model/cbi/hd_idle.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2010-04-14 10:33+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Disk"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable debug"
-msgstr ""
-
-msgid "Idle-time"
-msgstr ""
-
-msgid "Idle-time unit"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
diff --git a/po/ms/meshwizard.po b/po/ms/meshwizard.po
deleted file mode 100644
index 180d771..0000000
--- a/po/ms/meshwizard.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/ms/minidlna.po b/po/ms/minidlna.po
deleted file mode 100644
index 8df98a8..0000000
--- a/po/ms/minidlna.po
+++ /dev/null
@@ -1,163 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/ms/mmc_over_gpio.po b/po/ms/mmc_over_gpio.po
deleted file mode 100644
index edbb2ce..0000000
--- a/po/ms/mmc_over_gpio.po
+++ /dev/null
@@ -1,37 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
diff --git a/po/ms/multiwan.po b/po/ms/multiwan.po
deleted file mode 100644
index d175246..0000000
--- a/po/ms/multiwan.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/ms/ntpc.po b/po/ms/ntpc.po
deleted file mode 100644
index abbfdbe..0000000
--- a/po/ms/ntpc.po
+++ /dev/null
@@ -1,52 +0,0 @@
-# Generated from applications/luci-ntpc/luasrc/model/cbi/ntpc/*.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2010-04-14 13:24+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Clock Adjustment"
-msgstr ""
-
-msgid "Count of time measurements"
-msgstr ""
-
-msgid "Current system time"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Offset frequency"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Synchronizes the system time"
-msgstr ""
-
-msgid "Time Server"
-msgstr ""
-
-msgid "Time Servers"
-msgstr ""
-
-msgid "Time Synchronisation"
-msgstr ""
-
-msgid "Update interval (in seconds)"
-msgstr ""
-
-msgid "empty = infinite"
-msgstr ""
diff --git a/po/ms/olsr.po b/po/ms/olsr.po
deleted file mode 100644
index 89e0baa..0000000
--- a/po/ms/olsr.po
+++ /dev/null
@@ -1,575 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/ms/openvpn.po b/po/ms/openvpn.po
deleted file mode 100644
index 5cac2c2..0000000
--- a/po/ms/openvpn.po
+++ /dev/null
@@ -1,546 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/ms/p2pblock.po b/po/ms/p2pblock.po
deleted file mode 100644
index 00cccc8..0000000
--- a/po/ms/p2pblock.po
+++ /dev/null
@@ -1,28 +0,0 @@
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/ms/p910nd.po b/po/ms/p910nd.po
deleted file mode 100644
index 863ab59..0000000
--- a/po/ms/p910nd.po
+++ /dev/null
@@ -1,37 +0,0 @@
-#  p910nd.pot
-#  generated from ./applications/luci-p910nd/luasrc/i18n/p910nd.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Bidirectional mode"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr ""
diff --git a/po/ms/pbx-voicemail.po b/po/ms/pbx-voicemail.po
deleted file mode 100644
index bf633a6..0000000
--- a/po/ms/pbx-voicemail.po
+++ /dev/null
@@ -1,87 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/ms/pbx.po b/po/ms/pbx.po
deleted file mode 100644
index cde9320..0000000
--- a/po/ms/pbx.po
+++ /dev/null
@@ -1,448 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/ms/polipo.po b/po/ms/polipo.po
deleted file mode 100644
index 7517dcc..0000000
--- a/po/ms/polipo.po
+++ /dev/null
@@ -1,201 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/ms/qos.po b/po/ms/qos.po
deleted file mode 100644
index 6343b9a..0000000
--- a/po/ms/qos.po
+++ /dev/null
@@ -1,102 +0,0 @@
-# Generated from applications/luci-qos/luasrc/model/cbi/qos/qos.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2010-03-25 22:10+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/ms/radvd.po b/po/ms/radvd.po
deleted file mode 100644
index 8e0fb01..0000000
--- a/po/ms/radvd.po
+++ /dev/null
@@ -1,368 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-21 04:06+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/ms/rrdtool.po b/po/ms/rrdtool.po
deleted file mode 100644
index 1f81fc6..0000000
--- a/po/ms/rrdtool.po
+++ /dev/null
@@ -1,355 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/ms/samba.po b/po/ms/samba.po
deleted file mode 100644
index e29133e..0000000
--- a/po/ms/samba.po
+++ /dev/null
@@ -1,72 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow guests"
-msgstr ""
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-
-msgid "Allowed users"
-msgstr ""
-
-msgid "Create mask"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Directory mask"
-msgstr ""
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Mask for new directories"
-msgstr ""
-
-msgid "Mask for new files"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr ""
-
-msgid "Path"
-msgstr ""
-
-msgid "Read-only"
-msgstr ""
-
-msgid "Share home-directories"
-msgstr ""
-
-msgid "Shared Directories"
-msgstr ""
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr ""
diff --git a/po/ms/splash.po b/po/ms/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/ms/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/ms/statistics.po b/po/ms/statistics.po
deleted file mode 100644
index e828053..0000000
--- a/po/ms/statistics.po
+++ /dev/null
@@ -1,595 +0,0 @@
-#  statistics.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/statistics.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/ms/tinyproxy.po b/po/ms/tinyproxy.po
deleted file mode 100644
index 08ed7dc..0000000
--- a/po/ms/tinyproxy.po
+++ /dev/null
@@ -1,254 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/ms/transmission.po b/po/ms/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/ms/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/ms/upnp.po b/po/ms/upnp.po
deleted file mode 100644
index 86d20ba..0000000
--- a/po/ms/upnp.po
+++ /dev/null
@@ -1,143 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/ms/ushare.po b/po/ms/ushare.po
deleted file mode 100644
index 40b24f2..0000000
--- a/po/ms/ushare.po
+++ /dev/null
@@ -1,46 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Content directories"
-msgstr ""
-
-msgid "Disable telnet console"
-msgstr ""
-
-msgid "Disable webinterface"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Servername"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/ms/uvc_streamer.po b/po/ms/uvc_streamer.po
deleted file mode 100644
index b88074a..0000000
--- a/po/ms/uvc_streamer.po
+++ /dev/null
@@ -1,37 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/ms/vnstat.po b/po/ms/vnstat.po
deleted file mode 100644
index 9d23778..0000000
--- a/po/ms/vnstat.po
+++ /dev/null
@@ -1,59 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-16 20:54+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/ms/voice_core.po b/po/ms/voice_core.po
deleted file mode 100644
index a866bec..0000000
--- a/po/ms/voice_core.po
+++ /dev/null
@@ -1,14 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/ms/voice_diag.po b/po/ms/voice_diag.po
deleted file mode 100644
index bf65c14..0000000
--- a/po/ms/voice_diag.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/ms/watchcat.po b/po/ms/watchcat.po
deleted file mode 100644
index 91d83b9..0000000
--- a/po/ms/watchcat.po
+++ /dev/null
@@ -1,52 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/ms/wol.po b/po/ms/wol.po
deleted file mode 100644
index 0991ff5..0000000
--- a/po/ms/wol.po
+++ /dev/null
@@ -1,48 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2010-04-19 00:29+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/ms/wshaper.po b/po/ms/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/ms/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/no/ahcp.po b/po/no/ahcp.po
deleted file mode 100644
index d5fc7d3..0000000
--- a/po/no/ahcp.po
+++ /dev/null
@@ -1,117 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-06-14 20:11+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language-Team: none\n"
-"Language: no\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "AHCP Server"
-
-#, fuzzy
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP er en autokonfigurasjon protokoll for IPv6, og dual-stack IPv6/IPv4 "
-"nettverk. Det er laget for bruk der DHCP og Ruter oppdagelse er problematisk "
-"eller umulig å bruke for hvert link-lags broadcast domene, f.eks. mobile ad-"
-"hoc nettverk."
-
-msgid "Active AHCP Leases"
-msgstr "Aktive AHCP Leier"
-
-msgid "Address"
-msgstr "Adresse"
-
-msgid "Advanced Settings"
-msgstr "Avanserte Innstillinger"
-
-msgid "Age"
-msgstr "Alder"
-
-msgid "Announced DNS servers"
-msgstr "Annonserte DNS servere"
-
-msgid "Announced NTP servers"
-msgstr "Annonserte NTP servere"
-
-msgid "Announced prefixes"
-msgstr "Annonserte prefikser"
-
-msgid "Collecting data..."
-msgstr "Henter data..."
-
-#, fuzzy
-msgid "Forwarder"
-msgstr "Sender"
-
-msgid "General Setup"
-msgstr "Generelt Oppsett"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 og IPv6"
-
-msgid "IPv4 only"
-msgstr "Kun IPv4"
-
-msgid "IPv6 only"
-msgstr "Kun IPv6"
-
-#, fuzzy
-msgid "Lease directory"
-msgstr "Leie katalog"
-
-msgid "Lease validity time"
-msgstr "Gyldig leietid"
-
-msgid "Log file"
-msgstr "Logg fil"
-
-msgid "Multicast address"
-msgstr "Multicast adresse"
-
-msgid "Operation mode"
-msgstr "Driftsmodus"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Protokoll familie"
-
-#, fuzzy
-msgid "Served interfaces"
-msgstr "Utdelte grensesnitt"
-
-msgid "Server"
-msgstr "Server"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Angir annonserte IPv4 og IPv6 NTP-servere"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Angir annonserte IPv4 og IPv6 navnetjenere"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Angir annonserte IPv4 og IPv6 nettverk prefikser i CIDR-notasjon"
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr "Det er ingen aktive leieavtaler."
-
-msgid "Unique ID file"
-msgstr "Unik ID fil"
diff --git a/po/no/asterisk.po b/po/no/asterisk.po
deleted file mode 100644
index 5ef6109..0000000
--- a/po/no/asterisk.po
+++ /dev/null
@@ -1,11 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
diff --git a/po/no/base.po b/po/no/base.po
deleted file mode 100644
index d12e0e6..0000000
--- a/po/no/base.po
+++ /dev/null
@@ -1,3518 +0,0 @@
-msgid ""
-msgstr ""
-"PO-Revision-Date: 2013-03-25 23:36+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language: no\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d minutters vindu, %d sekunds intervall)"
-
-msgid "(%s available)"
-msgstr "(%s Tilgjengelig)"
-
-msgid "(empty)"
-msgstr "(tom)"
-
-msgid "(no interfaces attached)"
-msgstr "(ingen grensesnitt tilknyttet)"
-
-msgid "-- Additional Field --"
-msgstr "-- Tilleggs Felt --"
-
-msgid "-- Please choose --"
-msgstr "-- Vennligst velg --"
-
-msgid "-- custom --"
-msgstr "-- egendefinert --"
-
-msgid "1 Minute Load:"
-msgstr "1 minutts belastning:"
-
-msgid "15 Minute Load:"
-msgstr "15 minutters belastning:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz, Sekundær kanal over"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz, Sekundær kanal under"
-
-msgid "5 Minute Load:"
-msgstr "5 minutters belastning:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> spørre port"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servere skal følge rekkefølgen "
-"i oppslagsfilen ved spørringer"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Adresse"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Nettmaske"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Adresse eller "
-"Nettverk (CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Konfigurasjon"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Navn"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-Adresse"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"Maksimalt antall <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> leier"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"Maksimal\">Maks.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> pakke størrelse"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"Maksimal\">Maks.</abbr> samtidige spørringer"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Parvis: %s / Gruppe: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "<abbr title=\"Aksesspunkt Navn\">APN</abbr>"
-
-msgid "AR Support"
-msgstr "AR Støtte"
-
-msgid "ARP retry threshold"
-msgstr "APR terskel for nytt forsøk"
-
-msgid "ATM Bridges"
-msgstr "<abbr title=\"Asynchronous Transfer Mode\">ATM</abbr> Broer"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-"<abbr title=\"Asynchronous Transfer Mode\">ATM</abbr> Virtuell kanal "
-"identifikator <abbr title=\"Virtual Channel Identifier\">(VCI)</abbr>"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-"<abbr title=\"Asynchronous Transfer Mode\">ATM</abbr> Virtuell plasserings "
-"identifikator <abbr title=\"Virtual Path Identifier\">(VPI)</abbr>"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"ATM broer viser innkapslede ethernet i AAL5 forbindelser som virtuelle Linux-"
-"nettverk grensesnitt, dette kan brukes sammen med DHCP eller PPP for å koble "
-"seg mot en leverandørs nettverk."
-
-msgid "ATM device number"
-msgstr "<abbr title=\"Asynchronous Transfer Mode\">ATM</abbr> enhetsnummer"
-
-msgid "Accept router advertisements"
-msgstr "Godta ruterkunngjøringer"
-
-msgid "Access Concentrator"
-msgstr "Tilgangskonsentrator"
-
-msgid "Access Point"
-msgstr "Aksesspunkt"
-
-msgid "Action"
-msgstr "Handling"
-
-msgid "Actions"
-msgstr "Handlinger"
-
-msgid "Activate this network"
-msgstr "Aktiver dette nettverket"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Aktive <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Ruter"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Aktive <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Ruter"
-
-msgid "Active Connections"
-msgstr "Aktive Tilkoblinger"
-
-msgid "Active DHCP Leases"
-msgstr "Aktive DHCP Leier"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Aktive DHCPv6 Leier"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc (Uavhengig)"
-
-msgid "Add"
-msgstr "Legg til"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Legg det lokale domenesuffikset til navn utgitt fra vertsfiler"
-
-msgid "Add new interface..."
-msgstr "Legg til grensesnitt..."
-
-msgid "Additional Hosts files"
-msgstr "Tilleggs vertsfiler"
-
-msgid "Address"
-msgstr "Adresse"
-
-msgid "Address to access local relay bridge"
-msgstr "Adresse for tilgang til lokal relébro"
-
-msgid "Administration"
-msgstr "Administrasjon"
-
-msgid "Advanced Settings"
-msgstr "Avanserte Innstillinger"
-
-msgid "Advertise IPv6 on network"
-msgstr "Annonser IPv6 på nettverket"
-
-msgid "Advertised network ID"
-msgstr "Annonsert nettverks ID"
-
-msgid "Alert"
-msgstr "Varsle"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "Tillat <abbr title=\"Secure Shell\">SSH</abbr> passord godkjenning"
-
-msgid "Allow all except listed"
-msgstr "Tillat alle unntatt oppførte"
-
-msgid "Allow listed only"
-msgstr "Tillat kun oppførte"
-
-msgid "Allow localhost"
-msgstr "Tillat lokalvert"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr "Tillat eksterne verter å koble til lokale SSH videresendt porter"
-
-msgid "Allow root logins with password"
-msgstr "Tillat root pålogginger med passord"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Tillat bruker <em>root</em> å logge inn med passord"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr "Tillat oppstrøms svar i 127.0.0.0/8 nettet, f.eks for RBL tjenester"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Det tillatte området er fra 1 til 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-"Bruk alltid 40MHz kanaler selv om sekundær kanal overlapper. Dette "
-"alternativet er ikke i samsvar med IEEE 802.11n-2009!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Et nytt nettverk vil bli opprettet hvis du tar bort haken."
-
-msgid "Antenna 1"
-msgstr "Antenne 1"
-
-msgid "Antenna 2"
-msgstr "Antenne 2"
-
-msgid "Antenna Configuration"
-msgstr "Antennekonfigurasjon"
-
-msgid "Any zone"
-msgstr "Alle soner"
-
-msgid "Apply"
-msgstr "Bruk"
-
-msgid "Applying changes"
-msgstr "Utfører endringer"
-
-msgid "Assign interfaces..."
-msgstr "Tilknytt grensesnitt..."
-
-msgid "Associated Stations"
-msgstr "Tilkoblede Klienter"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Atheros 802.11%s Trådløs Kontroller"
-
-msgid "Authentication"
-msgstr "Godkjenning"
-
-msgid "Authoritative"
-msgstr "Autoritativ"
-
-msgid "Authorization Required"
-msgstr "Autorisasjon er nødvendig"
-
-msgid "Auto Refresh"
-msgstr "Automatisk oppdatering"
-
-msgid "Available"
-msgstr "Tilgjengelig"
-
-msgid "Available packages"
-msgstr "Tilgjengelige pakker"
-
-msgid "Average:"
-msgstr "Gjennomsnitt:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Tilbake"
-
-msgid "Back to Overview"
-msgstr "Tilbake til oversikt"
-
-msgid "Back to configuration"
-msgstr "Tilbake til konfigurasjon"
-
-msgid "Back to overview"
-msgstr "Tilbake til oversikt"
-
-msgid "Back to scan results"
-msgstr "Tilbake til skanne resultat"
-
-msgid "Background Scan"
-msgstr "Bakgrunns Skanning"
-
-msgid "Backup / Flash Firmware"
-msgstr "Sikkerhetskopiering/Firmware oppgradering"
-
-msgid "Backup / Restore"
-msgstr "Sikkerhetskopi/Gjenoppretting"
-
-msgid "Backup file list"
-msgstr "Sikkerhetskopier filliste"
-
-msgid "Bad address specified!"
-msgstr "Ugyldig adresse oppgitt!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Nedenfor er listen med filer som blir sikkerthetskopiert. Listen består av "
-"konfigurasjonsfiler som er merket av opkg, essensielle enhets filer og andre "
-"filer valgt av bruker."
-
-msgid "Bitrate"
-msgstr "Bitrate"
-
-msgid "Bogus NX Domain Override"
-msgstr "Overstyr falske NX Domener"
-
-msgid "Bridge"
-msgstr "Bro"
-
-msgid "Bridge interfaces"
-msgstr "Sammenkoble grensesnitt"
-
-msgid "Bridge unit number"
-msgstr "Bro enhetsnummer"
-
-msgid "Bring up on boot"
-msgstr "Slå på ved oppstart"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Broadcom 802.11%s Trådløs Kontroller"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Broadcom BCM%04x 802.11 Trådløs Kontroller"
-
-msgid "Buffered"
-msgstr "Bufret"
-
-msgid "Buttons"
-msgstr "Knapper"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "CPU forbruk (%)"
-
-msgid "Cached"
-msgstr "Hurtigbufret"
-
-msgid "Cancel"
-msgstr "Avbryt"
-
-msgid "Chain"
-msgstr "Lenke"
-
-msgid "Changes"
-msgstr "Endringer"
-
-msgid "Changes applied."
-msgstr "Endringer utført."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Endrer administrator passordet for tilgang til enheten"
-
-msgid "Channel"
-msgstr "Kanal"
-
-msgid "Check"
-msgstr "Kontroller"
-
-msgid "Checksum"
-msgstr "Kontrollsum"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Velg brannmur sonen du ønsker å knytte til dette grensesnittet. Velg "
-"<em>uspesifisert</em> for å fjerne grensesnittet fra den tilknyttede sonen. "
-"Eller fyll ut <em>Opprett</em> feltet for å definere en ny sone og tilknytte "
-"grensesnittet til det."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Velg det eller de nettverk du vil legge til dette trådløse grensesnittet, "
-"eller fyll ut <em>Opprett</em> feltet for å definere et nytt nettverk."
-
-msgid "Cipher"
-msgstr "Krypteringsmetode"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Klikk \"Opprett arkiv\" for å laste ned et tar arkiv av de gjeldende "
-"konfigurasjons filer. For å nullstille firmwaren til opprinnelig tilstand, "
-"klikker du på \"Utfør nullstilling\" (kun mulig på squashfs firmwarer)."
-
-msgid "Client"
-msgstr "Klient"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "Klient ID som sendes ved DHCP spørring"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Lukk inaktiver tilkoblinger etter angitt antall sekunder, bruk 0 for en "
-"kontinuerlig tilkobling"
-
-msgid "Close list..."
-msgstr "Lukk liste..."
-
-msgid "Collecting data..."
-msgstr "Henter data..."
-
-msgid "Command"
-msgstr "Kommando"
-
-msgid "Common Configuration"
-msgstr "Vanlige Innstillinger"
-
-msgid "Compression"
-msgstr "Komprimering"
-
-msgid "Configuration"
-msgstr "Konfigurasjon"
-
-msgid "Configuration applied."
-msgstr "Konfigurasjons endring utført."
-
-msgid "Configuration files will be kept."
-msgstr "Konfigurasjonsfiler vil bli bevart."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Konfigurerer dette monteringspunktet som overlay lagringspunkt for block-"
-"extroot"
-
-msgid "Confirmation"
-msgstr "Bekreftelse"
-
-msgid "Connect"
-msgstr "Koble til"
-
-msgid "Connected"
-msgstr "Tilkoblet"
-
-msgid "Connection Limit"
-msgstr "Tilkoblingsgrense (antall)"
-
-msgid "Connections"
-msgstr "Tilkoblinger"
-
-msgid "Country"
-msgstr "Land"
-
-msgid "Country Code"
-msgstr "Landskode"
-
-msgid "Cover the following interface"
-msgstr "Gjelder det følgende grensesnitt"
-
-msgid "Cover the following interfaces"
-msgstr "Gjelder de følgende grensesnitt"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Opprett/Tildel brannmur sone"
-
-msgid "Create Interface"
-msgstr "Opprett Grensesnitt"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Opprett en bro over flere grensesnitt"
-
-msgid "Critical"
-msgstr "Kritisk"
-
-msgid "Cron Log Level"
-msgstr "Cron logg nivå"
-
-msgid "Custom Interface"
-msgstr "Egendefinerte Grensesnitt"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Tilpasser oppførselen til enhetens <abbr title=\"Light Emitting "
-"Diode\">LED</abbr>s om mulig."
-
-msgid "DHCP Leases"
-msgstr "DHCP Leier"
-
-msgid "DHCP Server"
-msgstr "DHCP Server"
-
-msgid "DHCP and DNS"
-msgstr "DHCP og DNS"
-
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-msgid "DHCP-Options"
-msgstr "DHCP-Alternativer"
-
-msgid "DHCPv6 Leases"
-msgstr "DHCPv6 Leier"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "DNS videresendinger"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Feilsøking"
-
-msgid "Default %d"
-msgstr "Standard %d"
-
-msgid "Default gateway"
-msgstr "Standard gateway"
-
-msgid "Default state"
-msgstr "Standard tilstand"
-
-msgid "Define a name for this network."
-msgstr "Definer et navn for dette nettverket."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Definer flere DHCP valg, f.eks \"<code>192.168.2.1,192.168.2.2</code>\" som "
-"annonserer forskjellige DNS servere til klientene."
-
-msgid "Delete"
-msgstr "Fjern"
-
-msgid "Delete this interface"
-msgstr "Fjern dette grensesnitt"
-
-msgid "Delete this network"
-msgstr "Fjern dette nettverket"
-
-msgid "Description"
-msgstr "Beskrivelse"
-
-msgid "Design"
-msgstr "Design"
-
-msgid "Destination"
-msgstr "Destinasjon"
-
-msgid "Device"
-msgstr "Enhet"
-
-msgid "Device Configuration"
-msgstr "Enhet Konfigurasjon"
-
-msgid "Diagnostics"
-msgstr "Nettverksdiagnostikk"
-
-msgid "Directory"
-msgstr "Katalog"
-
-msgid "Disable"
-msgstr "Deaktiver"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Deaktiver <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-"for dette nettverket."
-
-msgid "Disable DNS setup"
-msgstr "Deaktiver DNS oppsett"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Deaktiver HW-Beacon timer"
-
-msgid "Disabled"
-msgstr "Deaktivert"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Forkast oppstrøms RFC1918 svar"
-
-msgid "Displaying only packages containing"
-msgstr "Viser bare pakker som inneholder"
-
-msgid "Distance Optimization"
-msgstr "Avstand Optimalisering"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Avstand i meter til det medlem av nettverket som er lengst unna."
-
-msgid "Diversity"
-msgstr "Antennevariasjon"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq er en kombinert <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server og <abbr title=\"Domain Navn System\">DNS</abbr>-"
-"Fremsender for <abbr title =\"Network Address Translation\">NAT</abbr> "
-"brannmurer"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "Ikke cache negative svar, f.eks for ikke eksisterende domener"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Ikke videresend forespørsler som ikke kan besvares med offentlige "
-"navneservere"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Ikke videresend reverserte oppslag for lokale nettverk"
-
-msgid "Do not send probe responses"
-msgstr "Ikke send probe svar"
-
-msgid "Domain required"
-msgstr "Domene kreves"
-
-msgid "Domain whitelist"
-msgstr "Domene hviteliste"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Ikke videresend <abbr title=\"Domain Name System\">DNS</abbr>-Forespørsler "
-"uten <abbr title=\"Domain Name System\">DNS</abbr>-Navn"
-
-msgid "Download and install package"
-msgstr "Last ned og installer pakken"
-
-msgid "Download backup"
-msgstr "Last ned sikkerhetskopi"
-
-msgid "Dropbear Instance"
-msgstr "Dropbear Instans"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear tilbyr <abbr title=\"Secure Shell\">SSH</abbr>-nettverks shell "
-"tilgang og en integrert <abbr title=\"Secure Copy\">SCP</abbr> server"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Dynamisk <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "Dynamisk tunnel"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Dynamisk tildeling av DHCP adresser til klienter. Om deaktivert, kan en kun "
-"bruke klienter med statisk leie."
-
-msgid "EAP-Method"
-msgstr "EAP-metode"
-
-msgid "Edit"
-msgstr "Endre"
-
-msgid "Edit this interface"
-msgstr "Endre dette grensesnittet"
-
-msgid "Edit this network"
-msgstr "Endre dette nettverket"
-
-msgid "Emergency"
-msgstr "Krisesituasjon"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Aktiver <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Aktiver HE,net dynamisk endepunkt oppdatering"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Aktiver IPv6 på PPP lenke"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Aktiver Jumbo Frames gjennomgang"
-
-msgid "Enable NTP client"
-msgstr "Aktiver NTP klient"
-
-msgid "Enable TFTP server"
-msgstr "Aktiver TFTP server"
-
-msgid "Enable VLAN functionality"
-msgstr "Aktiver VLAN funksjonalitet"
-
-msgid "Enable learning and aging"
-msgstr "Aktiver 'læring' og 'aldring'"
-
-msgid "Enable this mount"
-msgstr "Aktiver dette monteringspunktet"
-
-msgid "Enable this swap"
-msgstr "Aktiver denne swapenhet"
-
-msgid "Enable/Disable"
-msgstr "Aktiver/Deaktiver"
-
-msgid "Enabled"
-msgstr "Aktivert"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Aktiverer Spanning Tree Protocol på denne broen"
-
-msgid "Encapsulation mode"
-msgstr "Innkapsling modus"
-
-msgid "Encryption"
-msgstr "Kryptering"
-
-msgid "Erasing..."
-msgstr "Sletter..."
-
-msgid "Error"
-msgstr "Feil"
-
-msgid "Ethernet Adapter"
-msgstr "Ethernet Tilslutning"
-
-msgid "Ethernet Switch"
-msgstr "Ethernet Svitsj"
-
-msgid "Expand hosts"
-msgstr "Utvid vertsliste"
-
-msgid "Expires"
-msgstr "Utgår"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr "Utløpstid på leide adresser, minimum er 2 minutter (<code>2m</code>)."
-
-msgid "External system log server"
-msgstr "Ekstern systemlogg server"
-
-msgid "External system log server port"
-msgstr "Ekstern systemlogg server port"
-
-msgid "Fast Frames"
-msgstr "Fast Frames"
-
-msgid "File"
-msgstr "Fil"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Filnavn fra boot image annonsert til klienter"
-
-msgid "Filesystem"
-msgstr "Filsystem"
-
-msgid "Filter"
-msgstr "Filter"
-
-msgid "Filter private"
-msgstr "Filtrer private"
-
-msgid "Filter useless"
-msgstr "Filtrer ubrukelige"
-
-msgid "Find and join network"
-msgstr "Finn og koble til nettverk"
-
-msgid "Find package"
-msgstr "Finn pakke"
-
-msgid "Finish"
-msgstr "Fullfør"
-
-msgid "Firewall"
-msgstr "Brannmur"
-
-msgid "Firewall Settings"
-msgstr "Brannmur Innstillinger"
-
-msgid "Firewall Status"
-msgstr "Brannmur Status"
-
-msgid "Firmware Version"
-msgstr "Firmware Versjon"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Fast kilde port for utgående DNS-spørringer"
-
-msgid "Flags"
-msgstr "Flagg"
-
-msgid "Flash Firmware"
-msgstr "Firmware Oppradering"
-
-msgid "Flash image..."
-msgstr "Flash firmware..."
-
-msgid "Flash new firmware image"
-msgstr "Flash nytt firmware image"
-
-msgid "Flash operations"
-msgstr "Flash operasjoner"
-
-msgid "Flashing..."
-msgstr "Flasher..."
-
-msgid "Force"
-msgstr "Bruk"
-
-msgid "Force 40MHz mode"
-msgstr "Bruk 40MHz modus"
-
-msgid "Force CCMP (AES)"
-msgstr "Bruk CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Bruk DHCP i dette nettverket, selv om en annen DHCP server er oppdaget."
-
-msgid "Force TKIP"
-msgstr "Bruk TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Bruk TKIP og CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Videresend DHCP trafikk"
-
-msgid "Forward broadcast traffic"
-msgstr "Videresend kringkastingstrafikk"
-
-msgid "Forwarding mode"
-msgstr "Videresending modus"
-
-msgid "Fragmentation Threshold"
-msgstr "Fragmenterings Terskel"
-
-msgid "Frame Bursting"
-msgstr "Frame Bursting"
-
-msgid "Free"
-msgstr "Ledig"
-
-msgid "Free space"
-msgstr "Ledig plass"
-
-msgid "Frequency Hopping"
-msgstr "Frekvens Hopping"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "Kun GPRS"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "Gateway ports"
-msgstr "Gateway porter"
-
-msgid "General Settings"
-msgstr "Generelle Innstillinger"
-
-msgid "General Setup"
-msgstr "Generelt Oppsett"
-
-msgid "Generate archive"
-msgstr "Opprett arkiv"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Generell 802.11%s Trådløs Kontroller"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "Det oppgitte passordet var ikke korrekt, passord ble ikke endret!"
-
-msgid "Go to password configuration..."
-msgstr "Gå til passord konfigurasjon..."
-
-msgid "Go to relevant configuration page"
-msgstr "Gå til relevant konfigurasjonen side"
-
-msgid "HE.net password"
-msgstr "HE.net passord"
-
-msgid "HE.net user ID"
-msgstr "HE.net bruker ID"
-
-msgid "HT capabilities"
-msgstr "HT Muligheter"
-
-msgid "HT mode"
-msgstr "HT Modus"
-
-msgid "Handler"
-msgstr "Behandler"
-
-msgid "Hang Up"
-msgstr "Slå av"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Her kan du konfigurere grunnleggende aspekter av enheten som f.eks. dens "
-"vertsnavn eller tidssone."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Her kan du lime inn felles SSH-nøkler(en per linje), for SSH godkjenning."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Hermes 802.11b Trådløs Kontroller"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Skjul <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Vertsoppføringer"
-
-msgid "Host expiry timeout"
-msgstr "Verts utløpstid"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"Verts-<abbr title=\"Internet Protocol Address\">IP</abbr> eller Nettverk"
-
-msgid "Hostname"
-msgstr "Vertsnavn"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Vertsnavn som sendes ved DHCP forespørsel"
-
-msgid "Hostnames"
-msgstr "Vertsnavn"
-
-msgid "IP address"
-msgstr "IP adresse"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "IPv4 Brannmur"
-
-msgid "IPv4 WAN Status"
-msgstr "IPv4 WAN Status"
-
-msgid "IPv4 address"
-msgstr "IPv4 adresse"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 og IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "IPv4 kringkasting"
-
-msgid "IPv4 gateway"
-msgstr "IPv4 gateway"
-
-msgid "IPv4 netmask"
-msgstr "IPv4 nettmaske"
-
-msgid "IPv4 only"
-msgstr "Kun IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "IPv4 prefikslengde"
-
-msgid "IPv4-Address"
-msgstr "IPv4-Adresse"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "IPv6 Brannmur"
-
-msgid "IPv6 WAN Status"
-msgstr "IPv6 WAN Status"
-
-msgid "IPv6 address"
-msgstr "IPv6 adresse"
-
-msgid "IPv6 gateway"
-msgstr "IPv6 gateway"
-
-msgid "IPv6 only"
-msgstr "Kun IPv6"
-
-msgid "IPv6 prefix"
-msgstr "IPv6 prefiks"
-
-msgid "IPv6 prefix length"
-msgstr "IPv6 prefikslengde"
-
-msgid "IPv6-Address"
-msgstr "IPv6-Adresse"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-i-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-over-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-over-IPv4 (6til4)"
-
-msgid "Identity"
-msgstr "Identitet"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr "Hvis oppgitt vil denne enhet monteres ut fra dens UUID"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr "Hvis oppgitt vil denne enheten bli montert utfra dens Volumnavn"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Dersom ikke avmerket blir ingen standard rute konfigurert"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr "Dersom ikke avmerket blir de annonserte DNS server adresser ignorert"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Om ruterens fysiske minne er utilstrekkelig, ubrukte data kan midlertidig "
-"gjøres om til en swap-enhet som gir deg mere tilgjengelig <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Vær oppmerksom på at bruk av swap er "
-"mye langsommere en <abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Ignorer vertsfiler"
-
-msgid "Ignore interface"
-msgstr "Ignorer grensesnitt"
-
-msgid "Ignore resolve file"
-msgstr "Ignorer oppslagsfil"
-
-msgid "Image"
-msgstr "Firmware"
-
-msgid "In"
-msgstr "i"
-
-msgid "Inactivity timeout"
-msgstr "Tidsavbrudd etter innaktivitet"
-
-msgid "Inbound:"
-msgstr "Innkommende:"
-
-msgid "Info"
-msgstr "Informasjon"
-
-msgid "Initscript"
-msgstr "Oppstartskript"
-
-msgid "Initscripts"
-msgstr "Oppstartsskript"
-
-msgid "Install"
-msgstr "Installer"
-
-msgid "Install package %q"
-msgstr "Installer pakken %q"
-
-msgid "Install protocol extensions..."
-msgstr "Installer protokoll utvidelser..."
-
-msgid "Installed packages"
-msgstr "Installerte pakker"
-
-msgid "Interface"
-msgstr "Grensesnitt"
-
-msgid "Interface Configuration"
-msgstr "Grensesnitt Konfigurasjon"
-
-msgid "Interface Overview"
-msgstr "Grensesnitt Oversikt"
-
-msgid "Interface is reconnecting..."
-msgstr "Grensesnittet kobler til igjen..."
-
-msgid "Interface is shutting down..."
-msgstr "Grensesnittet slår seg av..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Grensesnittet er ikke tilgjengelig eller er ikke tilknyttet."
-
-msgid "Interface reconnected"
-msgstr "Grensesnittet er koblet til igjen"
-
-msgid "Interface shut down"
-msgstr "Grensesnittet er slått av"
-
-msgid "Interfaces"
-msgstr "Grensesnitt"
-
-msgid "Internal Server Error"
-msgstr "Intern server feil"
-
-msgid "Invalid"
-msgstr "Ugyldig"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "Ugyldig VLAN ID gitt! Bare IDer mellom %d og %d er tillatt."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "Ugyldig VLAN ID gitt! Bare unike ID'er er tillatt"
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Ugyldig brukernavn og/eller passord! Vennligst prøv igjen."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Det virker som du prøver å flashe med en firmware som ikke passer inn i "
-"flash-minnet, vennligst kontroller firmware filen!"
-
-msgid "Java Script required!"
-msgstr "Java Script kreves!"
-
-msgid "Join Network"
-msgstr "Koble til nettverket"
-
-msgid "Join Network: Settings"
-msgstr "Koble til nettverk: Innstilling"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Koble til nettverk: Trådløs Skanning"
-
-msgid "Keep settings"
-msgstr "Behold innstillinger"
-
-msgid "Kernel Log"
-msgstr "Kjerne Logg"
-
-msgid "Kernel Version"
-msgstr "Kjerne Versjon"
-
-msgid "Key"
-msgstr "Nøkkel"
-
-msgid "Key #%d"
-msgstr "Nøkkel #%d"
-
-msgid "Kill"
-msgstr "Drep"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "L2TP Server"
-
-msgid "LCP echo failure threshold"
-msgstr "LCP ekko feil terskel"
-
-msgid "LCP echo interval"
-msgstr "LCP ekko intervall"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Volumnavn"
-
-msgid "Language"
-msgstr "Språk"
-
-msgid "Language and Style"
-msgstr "Språk og Utseende"
-
-msgid "Lease validity time"
-msgstr "Gyldig leietid"
-
-msgid "Leasefile"
-msgstr "<abbr title=\"Leasefile\">Leie-fil</abbr>"
-
-msgid "Leasetime"
-msgstr "<abbr title=\"Leasetime\">Leietid</abbr>"
-
-msgid "Leasetime remaining"
-msgstr "Gjenværende leietid"
-
-msgid "Leave empty to autodetect"
-msgstr "La stå tomt for automatisk oppdagelse"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "La stå tomt for å bruke gjeldene WAN adresse"
-
-msgid "Legend:"
-msgstr "Forklaring:"
-
-msgid "Limit"
-msgstr "Grense"
-
-msgid "Link On"
-msgstr "Forbindelse"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Liste med <abbr title=\"Domain Name System\">DNS</abbr> servere som "
-"forespørsler blir videresendt til"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Liste over domener hvor en tillater RFC1918 svar"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "Liste over verter som returneren falske NX domene resultater"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-"Lytt kun på det angitte grensesnitt, om ingen er angitt lyttes det på alle"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Lytte-port for innkommende DNS-spørring"
-
-msgid "Load"
-msgstr "Belastning"
-
-msgid "Load Average"
-msgstr "Belastning Gjennomsnitt"
-
-msgid "Loading"
-msgstr "Laster"
-
-msgid "Local IPv4 address"
-msgstr "Lokal IPv4 adresse"
-
-msgid "Local IPv6 address"
-msgstr "Lokal IPv6 adresse"
-
-msgid "Local Startup"
-msgstr "Lokal Oppstart"
-
-msgid "Local Time"
-msgstr "Lokal tid"
-
-msgid "Local domain"
-msgstr "Lokalt domene"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Lokalt domene spesifikasjon. Navn som passer dette domenet blir aldri "
-"videresendt, de blir kun løst av DHCP eller vertsfiler"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr "Lokalt domenesuffiks lagt til DHCP navn og vertsfil oppføringer"
-
-msgid "Local server"
-msgstr "Lokal server"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Lokaliser vertsnavn avhengig av subnett hvis flere IP-adresser er "
-"tilgjengelig"
-
-msgid "Localise queries"
-msgstr "Lokalisere søk"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Låst til kanal %d brukt av %s"
-
-msgid "Log output level"
-msgstr "Logg nivå"
-
-msgid "Log queries"
-msgstr "Logg spørringer"
-
-msgid "Logging"
-msgstr "Logging"
-
-msgid "Login"
-msgstr "Logg inn"
-
-msgid "Logout"
-msgstr "Logg ut"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "Laveste leide adresse, forskjøvet fra nettverks adressen."
-
-msgid "MAC-Address"
-msgstr "MAC-Adresse"
-
-msgid "MAC-Address Filter"
-msgstr "MAC-Addresse Filter"
-
-msgid "MAC-Filter"
-msgstr "MAC-Filter"
-
-msgid "MAC-List"
-msgstr "MAC-Liste"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Maksimal hastighet"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Maksimalt antall aktive DHCP leieavtaler"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Maksimalt antall samtidige DNS spørringer"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Maksimal tillatt størrelse på EDNS.0 UDP-pakker"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Maksimalt antall sekunder å vente på at modemet skal bli klart"
-
-msgid "Maximum hold time"
-msgstr "Maksimal holde tid"
-
-msgid "Maximum number of leased addresses."
-msgstr "Maksimalt antall utleide adresser."
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "Minne"
-
-msgid "Memory usage (%)"
-msgstr "Minne forbruk (%)"
-
-msgid "Metric"
-msgstr "Metrisk"
-
-msgid "Minimum Rate"
-msgstr "Minimum hastighet"
-
-msgid "Minimum hold time"
-msgstr "Minimum holde tid"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Mangler protokoll utvidelse for proto %q"
-
-msgid "Mode"
-msgstr "Modus"
-
-msgid "Modem device"
-msgstr "Modem"
-
-msgid "Modem init timeout"
-msgstr "Modem initiering tidsavbrudd"
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr "Monterings Enhet"
-
-msgid "Mount Point"
-msgstr "Monterings Punkt"
-
-msgid "Mount Points"
-msgstr "Monterings Punkter"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Monterings Punkter - Monterings Enhet"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Monterings Punkter - Swap Enhet"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Monterings punkter definerer hvor lagrings enheter blir tilsluttet "
-"filsystemet"
-
-msgid "Mount options"
-msgstr "Monterings alternativer"
-
-msgid "Mount point"
-msgstr "Monterings punkt"
-
-msgid "Mounted file systems"
-msgstr "Monterte Filsystemer"
-
-msgid "Move down"
-msgstr "Flytt ned"
-
-msgid "Move up"
-msgstr "Flytt opp"
-
-msgid "Multicast Rate"
-msgstr "Multicast hastighet"
-
-msgid "Multicast address"
-msgstr "Multicast adresse"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "NTP server kandidater"
-
-msgid "Name"
-msgstr "Navn"
-
-msgid "Name of the new interface"
-msgstr "Navnet til det nye grensesnittet"
-
-msgid "Name of the new network"
-msgstr "Navnet til det nye nettverket"
-
-msgid "Navigation"
-msgstr "Navigasjon"
-
-msgid "Netmask"
-msgstr "Nettmaske"
-
-msgid "Network"
-msgstr "Nettverk"
-
-msgid "Network Utilities"
-msgstr "Nettverks Verktøy"
-
-msgid "Network boot image"
-msgstr "Nettverks boot image"
-
-msgid "Network without interfaces."
-msgstr "Nettverk uten grensesnitt."
-
-msgid "Next »"
-msgstr "Neste »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Ingen DHCP server er konfigurert for dette grensesnittet"
-
-msgid "No chains in this table"
-msgstr "Ingen lenker i denne tabellen"
-
-msgid "No files found"
-msgstr "Ingen filer funnet"
-
-msgid "No information available"
-msgstr "Ingen informasjon tilgjengelig"
-
-msgid "No negative cache"
-msgstr "Ingen negative cache"
-
-msgid "No network configured on this device"
-msgstr "Ingen nettverk er konfigurert på denne enheten"
-
-msgid "No network name specified"
-msgstr "Ingen nettverksnavn spesifisert"
-
-msgid "No package lists available"
-msgstr "Ingen pakkelister tilgjengelig"
-
-msgid "No password set!"
-msgstr "Ruteren er ikke passordbeskyttet!"
-
-msgid "No rules in this chain"
-msgstr "Ingen regler i denne tabellen"
-
-msgid "No zone assigned"
-msgstr "Ingen sone tilknyttet"
-
-msgid "Noise"
-msgstr "Støy"
-
-msgid "Noise:"
-msgstr "Støy:"
-
-msgid "None"
-msgstr "Ingen"
-
-msgid "Normal"
-msgstr "Normal"
-
-msgid "Not Found"
-msgstr "Ikke funnet"
-
-msgid "Not associated"
-msgstr "Ikke tilknyttet"
-
-msgid "Not connected"
-msgstr "Ikke tilkoblet"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Merk: Konfigurasjonsfiler vil bli slettet"
-
-msgid "Notice"
-msgstr "Merk"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "<abbr title=\"Open PacKaGe Management\">OPKG</abbr>-Konfigurasjon"
-
-msgid "Off-State Delay"
-msgstr "Forsinkelse ved tilstand Av"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"På denne siden kan du konfigurere nettverks grensesnittet. Du kan "
-"sammenkoble flere grensesnitt ved å hake av \"Sammekoble grensesnitt\" "
-"feltet og skrive inn navn på grensesnittene atskilt med mellomrom. Du kan "
-"også bruke <abbr title=\"Virtual Local Area Network\">VLAN</abbr> betegnelse "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for eksempel\">f.eks</abbr>: "
-"<samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Forsinkelse ved tilstand -På-"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr "Enten Vertsnavn eller Mac-adresse må oppgis!"
-
-msgid "One or more fields contain invalid values!"
-msgstr "Ett eller flere felt inneholder ugyldige verdier!"
-
-msgid "One or more required fields have no value!"
-msgstr "Ett eller flere obligatoriske felter har ingen verdi!"
-
-msgid "Open list..."
-msgstr "Åpne liste..."
-
-msgid "Option changed"
-msgstr "Innstilling endret"
-
-msgid "Option removed"
-msgstr "Innstilling fjernet"
-
-msgid "Options"
-msgstr "Alternativer"
-
-msgid "Other:"
-msgstr "Andre:"
-
-msgid "Out"
-msgstr "Ut"
-
-msgid "Outbound:"
-msgstr "Ugående:"
-
-msgid "Outdoor Channels"
-msgstr "Utendørs Kanaler"
-
-msgid "Override MAC address"
-msgstr "Overstyr MAC adresse"
-
-msgid "Override MTU"
-msgstr "Overstyr MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Overstyr gatewayen mottatt av DHCP respons"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Overstyr nettmaske sendt til klienter. Normalt er nettmasken beregnet ut fra "
-"subnettet som blir tildelt."
-
-msgid "Override the table used for internal routes"
-msgstr "Overstyr tabellen som brukes for interne ruter"
-
-msgid "Overview"
-msgstr "Oversikt"
-
-msgid "Owner"
-msgstr "Eier"
-
-msgid "PAP/CHAP password"
-msgstr "PAP/CHAP passord"
-
-msgid "PAP/CHAP username"
-msgstr "PAP/CHAP brukernavn"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "PPPoA Innkapsling"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "Pakken libiwinfo er nødvendig!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Pakkelistene er eldre enn 24 timer"
-
-msgid "Package name"
-msgstr "Pakkenavn"
-
-msgid "Packets"
-msgstr "Pakker"
-
-msgid "Part of zone %q"
-msgstr "En del av sone %q"
-
-msgid "Password"
-msgstr "Passord"
-
-msgid "Password authentication"
-msgstr "Passord godkjenning"
-
-msgid "Password of Private Key"
-msgstr "Passord for privatnøkkel"
-
-msgid "Password successfully changed!"
-msgstr "Passordet er endret!"
-
-msgid "Path to CA-Certificate"
-msgstr "Sti til CA-sertifikat"
-
-msgid "Path to Client-Certificate"
-msgstr "Sti til klient-sertifikat"
-
-msgid "Path to Private Key"
-msgstr "Sti til privatnøkkel"
-
-msgid "Path to executable which handles the button event"
-msgstr "Sti til program som håndterer handling ved bruk av knapp"
-
-msgid "Peak:"
-msgstr "Maksimalt:"
-
-msgid "Perform reboot"
-msgstr "Omstart nå"
-
-msgid "Perform reset"
-msgstr "Foreta nullstilling"
-
-msgid "Phy Rate:"
-msgstr "Phy Hastighet:"
-
-msgid "Physical Settings"
-msgstr "Fysiske Innstillinger"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "Pakker."
-
-msgid "Please enter your username and password."
-msgstr "Skriv inn ditt brukernavn og passord."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Vent: Enheten starter på nytt..."
-
-msgid "Policy"
-msgstr "Policy"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr "Port %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "Port %d er utagget i flere VLANs!"
-
-msgid "Port status:"
-msgstr "Port status:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Annta at peer er uten forbindelse om angitt LCP ekko feiler, bruk verdi 0 "
-"for å overse feil"
-
-msgid "Prevents client-to-client communication"
-msgstr "Hindrer klient-til-klient kommunikasjon"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Prism2/2.5/3 802.11b Trådløs Kontroller"
-
-msgid "Proceed"
-msgstr "Fortsett"
-
-msgid "Processes"
-msgstr "Prosesser"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Protocol family"
-msgstr "Protokoll familie"
-
-msgid "Protocol of the new interface"
-msgstr "Protokoll til det nye grensesnittet"
-
-msgid "Protocol support is not installed"
-msgstr "Protokoll støtte er ikke installert"
-
-msgid "Provide NTP server"
-msgstr "Funger som NTP Server"
-
-msgid "Provide new network"
-msgstr "Lag nytt nettverk"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Kvalitet"
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS Terskel"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "RX Rate"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "RaLink 802.11%s Trådløs Kontroller"
-
-msgid "Radius-Accounting-Port"
-msgstr "Radius-Accounting-Port"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Radius-Accounting-Secret"
-
-msgid "Radius-Accounting-Server"
-msgstr "Radius-Accounting-Server"
-
-msgid "Radius-Authentication-Port"
-msgstr "Radius-Authentication-Port"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Radius-Authentication-Secret"
-
-msgid "Radius-Authentication-Server"
-msgstr "Radius-Authentication-Server"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Benytt <code>/etc/ethers</code> for å konfigurere <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Fjerne dette grensesnittet? Slettingen kan ikke omgjøres!\n"
-"Du kan miste kontakten med ruteren om du er tilkoblet via dette "
-"grensesnittet."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Fjerne dette trådløse nettverket? Slettingen kan ikke omgjøres!\n"
-"Du kan miste kontakten med ruteren om du er tilkoblet via dette nettverket."
-
-msgid "Really reset all changes?"
-msgstr "Vil du nullstille alle endringer?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Slå av dette grensesnittet \"%s\" ?\n"
-"Du kan miste kontakten med ruteren om du er tilkoblet via dette "
-"grensesnittet."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Slå av dette nettverket ?\n"
-"Du kan miste kontakten med ruteren om du er tilkoblet via dette "
-"grensesnittet."
-
-msgid "Really switch protocol?"
-msgstr "Vil du endre protokoll?"
-
-msgid "Realtime Connections"
-msgstr "Tilkoblinger Sanntid"
-
-msgid "Realtime Graphs"
-msgstr "Grafer i sanntid"
-
-msgid "Realtime Load"
-msgstr "Belastning Sanntid"
-
-msgid "Realtime Traffic"
-msgstr "Trafikk Sanntid"
-
-msgid "Realtime Wireless"
-msgstr "Trådløst i sanntid"
-
-msgid "Rebind protection"
-msgstr "Binde beskyttelse"
-
-msgid "Reboot"
-msgstr "Omstart"
-
-msgid "Rebooting..."
-msgstr "Starter på nytt..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Omstarter operativsystemet på enheten"
-
-msgid "Receive"
-msgstr "Motta"
-
-msgid "Receiver Antenna"
-msgstr "Mottak antenne"
-
-msgid "Reconnect this interface"
-msgstr "Koble til igjen"
-
-msgid "Reconnecting interface"
-msgstr "Kobler til igjen"
-
-msgid "References"
-msgstr "Referanser"
-
-msgid "Regulatory Domain"
-msgstr "Regulerende Domene"
-
-msgid "Relay"
-msgstr "Relay"
-
-msgid "Relay Bridge"
-msgstr "Relay bro"
-
-msgid "Relay between networks"
-msgstr "Relay mellom nettverk"
-
-msgid "Relay bridge"
-msgstr "Relay bro"
-
-msgid "Remote IPv4 address"
-msgstr "Ekstern IPv4 adresse"
-
-msgid "Remove"
-msgstr "Avinstaller"
-
-msgid "Repeat scan"
-msgstr "Skann på nytt"
-
-msgid "Replace entry"
-msgstr "Erstatt oppføring"
-
-msgid "Replace wireless configuration"
-msgstr "Erstatt trådløs konfigurasjon"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Er nødvendig for noen nettleverandører, f.eks Charter med DOCSIS 3"
-
-msgid "Reset"
-msgstr "Nullstill"
-
-msgid "Reset Counters"
-msgstr "Nullstill Tellere"
-
-msgid "Reset to defaults"
-msgstr "Nullstill til standard innstilling"
-
-msgid "Resolv and Hosts Files"
-msgstr "Oppslag og Vertsfiler"
-
-msgid "Resolve file"
-msgstr "<abbr title=\"Resolvefile\">Oppslagsfil</abbr>"
-
-msgid "Restart"
-msgstr "Omstart"
-
-msgid "Restart Firewall"
-msgstr "Omstart Brannmur"
-
-msgid "Restore backup"
-msgstr "Gjenopprett sikkerhetskopi"
-
-msgid "Reveal/hide password"
-msgstr "Vis/Skjul passord"
-
-msgid "Revert"
-msgstr "Tilbakestill"
-
-msgid "Root"
-msgstr "Rot"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Rot katalog for filer gitt fra TFTP"
-
-msgid "Router Model"
-msgstr "Ruter Modell"
-
-msgid "Router Name"
-msgstr "Ruter Navn"
-
-msgid "Router Password"
-msgstr "Ruter Passord"
-
-msgid "Routes"
-msgstr "Ruter"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Ruter, angir hvilket nettverksgrensesnitt og hvilken gateway som brukes for "
-"å nå et gitt nettverk eller vert."
-
-msgid "Rule #"
-msgstr "Regel #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "Kjør filsystem sjekk før montering av enheten"
-
-msgid "Run filesystem check"
-msgstr "Kjør filsystem sjekk"
-
-msgid "SSH Access"
-msgstr "SSH Tilgang"
-
-msgid "SSH-Keys"
-msgstr "SSH-Nøkler"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Lagre"
-
-msgid "Save & Apply"
-msgstr "Lagre & Aktiver"
-
-msgid "Save &#38; Apply"
-msgstr "Lagre &#38; Aktiver"
-
-msgid "Scan"
-msgstr "Skann"
-
-msgid "Scheduled Tasks"
-msgstr "Planlagte Oppgaver"
-
-msgid "Section added"
-msgstr "Seksjon lagt til"
-
-msgid "Section removed"
-msgstr "Seksjon fjernet"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Se \"mount\" manpage for detaljer"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"Send LCP ekko forespørsler etter angitt intervall i sekunder, dette er kun "
-"gjeldene dersom feilterskelen er nådd"
-
-msgid "Send router solicitations"
-msgstr "Send ruter anmodninger"
-
-msgid "Separate Clients"
-msgstr "Separerte Klienter"
-
-msgid "Separate WDS"
-msgstr "Separert WDS"
-
-msgid "Server Settings"
-msgstr "Server Innstillinger"
-
-msgid "Service Name"
-msgstr "Tjeneste navn"
-
-msgid "Service Type"
-msgstr "Tjeneste type"
-
-msgid "Services"
-msgstr "Tjenester"
-
-msgid "Setup DHCP Server"
-msgstr "Oppsett DHCP server"
-
-msgid "Setup Time Synchronization"
-msgstr "Oppsett tidssynkronisering"
-
-msgid "Show current backup file list"
-msgstr "Vis gjeldende liste med sikkerhetskopifiler"
-
-msgid "Shutdown this interface"
-msgstr "Slå av dette grensesnittet"
-
-msgid "Shutdown this network"
-msgstr "Slå av dette nettverket"
-
-msgid "Signal"
-msgstr "Signal"
-
-msgid "Signal:"
-msgstr "Signal:"
-
-msgid "Size"
-msgstr "Størrelse"
-
-msgid "Skip"
-msgstr "Gå videre"
-
-msgid "Skip to content"
-msgstr "Gå til innhold"
-
-msgid "Skip to navigation"
-msgstr "Gå til navigasjon"
-
-msgid "Slot time"
-msgstr "Slot tid"
-
-msgid "Software"
-msgstr "Programvare"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Noen felt er ugyldige, kan ikke lagre verdier!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Beklager, objektet du spurte om ble ikke funnet."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Beklager, det oppstod en uventet feil på serveren."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"Beklager, men finner ikke støtte for 'sysupgrade', ny firmware må derfor "
-"flashes manuelt. Viser til OpenWrt wiki for installering av firmare på "
-"forskjellige enheter."
-
-msgid "Sort"
-msgstr "Sortering"
-
-msgid "Source"
-msgstr "Kilde"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "Angir den annonserte foretrukne prefikslevetiden i sekunder"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Angir den annonserte gyldige prefikslevetiden i sekunder"
-
-msgid "Specifies the button state to handle"
-msgstr "Spesifiserer knappens handlemønster"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Hvor lagrings enheten blir tilsluttet filsystemet (f.eks. /mnt/sda1)"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Angir den lyttende porten for denne <em>Dropbear</em> instansen"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Angir maksimalt antall feilede ARP forespørsler før verter ansees frakoblet"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr "Angir maksimalt antall sekunder før verter ansees som frakoblet"
-
-msgid "Specify the secret encryption key here."
-msgstr "Angi krypteringsnøkkelen her."
-
-msgid "Start"
-msgstr "Start"
-
-msgid "Start priority"
-msgstr "Start prioritet"
-
-msgid "Startup"
-msgstr "Oppstart"
-
-msgid "Static IPv4 Routes"
-msgstr "Statiske IPv4 Ruter"
-
-msgid "Static IPv6 Routes"
-msgstr "Statiske IPv6 Ruter"
-
-msgid "Static Leases"
-msgstr "Statiske Leier"
-
-msgid "Static Routes"
-msgstr "Statiske Ruter"
-
-msgid "Static WDS"
-msgstr "Statisk WDS"
-
-msgid "Static address"
-msgstr "Statisk adresse"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Statisk leieavtaler brukes til å tildele faste IP adresser og symbolske "
-"vertsnavn til DHCP klienter. Dette er nødvendig om grensesnittet ikke er "
-"dynamisk konfigurert og kun klienter med dhcp leieavtale får IP."
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Stop"
-msgstr "Stop"
-
-msgid "Strict order"
-msgstr "Streng overholdelse"
-
-msgid "Submit"
-msgstr "Send"
-
-msgid "Swap Entry"
-msgstr "Swap Enhet"
-
-msgid "Switch"
-msgstr "Svitsj"
-
-msgid "Switch %q"
-msgstr "Svitsj %q"
-
-msgid "Switch %q (%s)"
-msgstr "Svitsj %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Svitsj protokoll"
-
-msgid "Sync with browser"
-msgstr "Synkroniser med nettleser"
-
-msgid "Synchronizing..."
-msgstr "Synkroniser..."
-
-msgid "System"
-msgstr "System"
-
-msgid "System Log"
-msgstr "System Logg"
-
-msgid "System Properties"
-msgstr "System Egenskaper"
-
-msgid "System log buffer size"
-msgstr "System logg buffer størrelse"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "TFTP Innstillinger"
-
-msgid "TFTP server root"
-msgstr "TFTP server roten"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "TX rate"
-
-msgid "Table"
-msgstr "Tabell"
-
-msgid "Target"
-msgstr "Mål"
-
-msgid "Terminate"
-msgstr "Avslutte"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"<em>Enhet Konfigurasjon</em> seksjonen omhandler innstillingene av den "
-"trådløse enheten som kanaler, sende stryke eller antenne valg. Disse "
-"innstillingene er delt mellom alle definerte trådløse nettverk opprettet "
-"utfra denne enhet. (om den trådløse enheten støtter mulit-SSID). Nettverks "
-"innstillinger som kryptering eller kanaler er gruppert i <em>Grensesnitt "
-"Konfigurasjon</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Pakken <em>libiwinfo-lua</em> er ikke installert. Du må installere denne "
-"pakken for å kunne konfigurerer trådløse enheter!"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"IPv6 prefikset tilordnet mot leverandør, ender som regel med <code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Gyldige tegn er: <code>A-Z</code>, <code>a-z</code>, <code>0-9</code> og "
-"<code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"Filenheten til partisjonen eller minnet (<abbr title=\"for eksempel\">f.eks."
-"</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Filsystemet som ble brukt til å formatere partisjonen eller minnet. (<abbr "
-"title=\"for eksempel\">f.eks.</abbr> <samp><abbr title=\"Third Extended "
-"Filesystem\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Firmwaren ble lastet opp. Nedenfor er kontrollsum og filstørrelse oppført, "
-"sammenlign dem med den opprinnelige filen for å sikre dataintegriteten.<br /"
-"> Klikk \"Fortsett\" nedenfor for å starte flash prosedyren."
-
-msgid "The following changes have been committed"
-msgstr "Følgende endringer er foretatt"
-
-msgid "The following changes have been reverted"
-msgstr "Følgende endringer er forkastet"
-
-msgid "The following rules are currently active on this system."
-msgstr "Følgende regler er aktiver på systemet."
-
-msgid "The given network name is not unique"
-msgstr "Det angitte nettverksnavnet er ikke unikt"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"Maskinvaren er ikke multi-SSID kapabel og den ekisterende konfigurasjonen "
-"vil bli erstattet om du fortsetter."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr "Lengden IPv4 prefikset i bits, resten brukt i IPv6-adresser."
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "Lengden på IPv6 prefikset i bits"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"Nettverks portene på ruteren kan kombineres til flere <abbr title=\"Virtual "
-"Local Area Network\">VLAN</abbr>s der datamaskiner kan kommunisere direkte "
-"med hverandre. <abbr title=\"Virtual Local Area Network\">VLAN</abbr>s brukes "
-"ofte for å skille ulike nettverk segmenter. Det er vanlig og ha en Uplink "
-"port for tilkobling til større nettverk som internett og andre porter til "
-"lokalt nettverk."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "Den valgte protokoll må ha en enhet tilknyttet"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"Systemet sletter konfigurasjonspartisjonen nå, enheten vil bli startet på "
-"nytt når dette er utført."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"Systemet flashes nå.<br /> IKKE SLÅ AV ENHETEN!<br /> Vent noen minutter før "
-"du prøver å koble til igjen. Det kan være nødvendig å fornye ip-adressen "
-"til datamaskinen din for å nå enheten på nytt. (avhengig av innstillingene "
-"dine)"
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"Den opplastede programvaren er av et format som ikke støttes. Sørg for at du "
-"velger det generelle firmware-bildet for din plattform."
-
-msgid "There are no active leases."
-msgstr "Det er ingen aktive leieavtaler."
-
-msgid "There are no pending changes to apply!"
-msgstr "Det finnes ingen endringer som kan utføres!"
-
-msgid "There are no pending changes to revert!"
-msgstr "Det finnes ingen endriger å reversere!"
-
-msgid "There are no pending changes!"
-msgstr "Det finnes ingen endringer!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Det er ingen enhet som er tilordnet ennå, vennligst legg til en "
-"nettverksenhet i \"Fysiske Innstillinger\""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Det er ikke satt noe passord på denne ruter. Vennligst konfigurer et "
-"passord, dette beskytter webgrensesnittet og aktiverer SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr "Dette IPv4 adressen til relayet"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Dette er en liste med 'shell glob patterns' for å matche filer og kataloger "
-"som skal inkluderes under sysupgrade. Endrede filer i /etc/config/ og "
-"enkelte andre konfigurasjoner blir automatisk bevart."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr "Dette er det 32 byte hexkodede bruker ID'en, ikke påloggingsnavnet"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Dette er innholdet i /etc/rc.local. Her kan du legge til egne kommandoer som "
-"blir startet ved slutten av boot sekvensen. (før 'exit 0')"
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"Dette er den lokale endepunkt adressen som ble tildelt av tunnel 'broker', "
-"adressen ender vanligvis med <code>:2</code>"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Dette er den eneste <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> server i det lokale nettverket"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "Dette er systemets crontab, hvor planlagte oppgaver kan defineres."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-"Dette er vanligvis adressen til nærmeste PoP som drives av tunell 'broker'"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr "Denne listen gir en oversikt over kjørende prosesser og deres status."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-"Denne siden gir mulighet for å definerte egne knappers handlingsmønster"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Denne siden gir en oversikt over gjeldende aktive nettverkstilkoblinger."
-
-msgid "This section contains no values yet"
-msgstr "Denne seksjonen inneholder ennå ingen verdier"
-
-msgid "Time Synchronization"
-msgstr "Tidssynkronisering"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "Tiden Synkroniseringen er ikke konfigurert ennå."
-
-msgid "Timezone"
-msgstr "Tidssone"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"For å gjenopprette konfigurasjonsfiler, kan du her laste opp et backup arkiv "
-"som ble opprettet tidligere."
-
-msgid "Total Available"
-msgstr "Totalt Tilgjengelig"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "Trafikk"
-
-msgid "Transfer"
-msgstr "Overføring"
-
-msgid "Transmission Rate"
-msgstr "Overførings rate"
-
-msgid "Transmit"
-msgstr "Sende"
-
-msgid "Transmit Power"
-msgstr "Sende styrke"
-
-msgid "Transmitter Antenna"
-msgstr "Sende Antenne"
-
-msgid "Trigger"
-msgstr "Utløser"
-
-msgid "Trigger Mode"
-msgstr "Utløsende Tilstand"
-
-msgid "Tunnel ID"
-msgstr "Tunnel ID"
-
-msgid "Tunnel Interface"
-msgstr "Tunnel grensesnitt"
-
-msgid "Turbo Mode"
-msgstr "Turbo Modus"
-
-msgid "Tx-Power"
-msgstr "Tx-Styrke"
-
-msgid "Type"
-msgstr "Type"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "Kun UMTS"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "USB Enhet"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Kan ikke sende"
-
-msgid "Unknown"
-msgstr "Ukjent"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Ukjent feil, passordet ble ikke endret!"
-
-msgid "Unmanaged"
-msgstr "Uhåndtert"
-
-msgid "Unsaved Changes"
-msgstr "Ulagrede Endringer"
-
-msgid "Unsupported protocol type."
-msgstr "Protokoll type er ikke støttet."
-
-msgid "Update lists"
-msgstr "Oppdater lister"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Last her opp en sysupgrade-kompatibel firmware som skal erstatte den "
-"kjørende firmware. Merk av \"Behold innstillinger\" for å beholde gjeldene "
-"konfigurasjon. (en OpenWrt kompatibel firmware er nødvendig)"
-
-msgid "Upload archive..."
-msgstr "Last opp arkiv..."
-
-msgid "Uploaded File"
-msgstr "Opplastet Fil"
-
-msgid "Uptime"
-msgstr "Oppetid"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Bruk <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Bruk DHCP gateway"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Bruk DNS servere annonsert av peer"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Bruk ISO/IEC 3166 alpha2 landskoder."
-
-msgid "Use MTU on tunnel interface"
-msgstr "Bruk MTU på tunnel grensesnitt"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Bruk TTL på tunnel grensesnitt"
-
-msgid "Use as root filesystem"
-msgstr "Bruk som rot filsystem"
-
-msgid "Use broadcast flag"
-msgstr "Bruk kringkasting flagg"
-
-msgid "Use custom DNS servers"
-msgstr "Bruk egendefinerte DNS servere"
-
-msgid "Use default gateway"
-msgstr "Bruk standard gateway"
-
-msgid "Use gateway metric"
-msgstr "Bruk gateway metrikk"
-
-msgid "Use preferred lifetime"
-msgstr "Bruk foretrukket levetid"
-
-msgid "Use routing table"
-msgstr "Bruk rutingtabellen"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Bruk <em>Legg til</em> knappen får å legge til en leieavtale. <em>MAC-"
-"Adresse</em> identifiserer verten, <em>IPv4-Adresse</em> angir hvilken "
-"statisk IP adresse som skal brukes og <em>Vertsnavn</em> blir symbolsk "
-"tilknyttet den anmodende verten."
-
-msgid "Use valid lifetime"
-msgstr "Bruk gyldig levetid"
-
-msgid "Used"
-msgstr "Brukt"
-
-msgid "Used Key Slot"
-msgstr "Brukte Nøkler"
-
-msgid "Username"
-msgstr "Brukernavn"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "VLAN grensesnitt"
-
-msgid "VLANs on %q"
-msgstr "VLANs på %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLANs på %q (%s)"
-
-msgid "VPN Server"
-msgstr "VPN server"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "Leverandør klasse som sendes ved DHCP spørring"
-
-msgid "Verify"
-msgstr "Bekreft"
-
-msgid "Version"
-msgstr "Versjon"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "WEP åpent system"
-
-msgid "WEP Shared Key"
-msgstr "WEP delt nøkkel"
-
-msgid "WEP passphrase"
-msgstr "WEP passord"
-
-msgid "WMM Mode"
-msgstr "WMM Modus"
-
-msgid "WPA passphrase"
-msgstr "WPA passord"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA-Kryptering krever at wpa_supplicant (for klient-modus) eller hostapd "
-"(for AP og ad-hoc-modus) er installert."
-
-msgid "Waiting for changes to be applied..."
-msgstr "Venter på at endringer utføres..."
-
-msgid "Waiting for command to complete..."
-msgstr "Venter på at kommando fullføres..."
-
-msgid "Warning"
-msgstr "Advarsel"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Advarsel: Det er ulagrede endringer som vil gå tapt under omstarten!"
-
-msgid "Wifi"
-msgstr "Trådløs"
-
-msgid "Wireless"
-msgstr "Trådløs"
-
-msgid "Wireless Adapter"
-msgstr "Trådløs Tilslutning"
-
-msgid "Wireless Network"
-msgstr "Trådløst Nettverk"
-
-msgid "Wireless Overview"
-msgstr "Trådløs Oversikt"
-
-msgid "Wireless Security"
-msgstr "Trådløs Sikkerhet"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Trådløs er deaktiver eller ikke tilknyttet"
-
-msgid "Wireless is restarting..."
-msgstr "Trådløst starter på nytt..."
-
-msgid "Wireless network is disabled"
-msgstr "Trådløst nettverk er deaktivert"
-
-msgid "Wireless network is enabled"
-msgstr "Trådløst nettverk er aktivert"
-
-msgid "Wireless restarted"
-msgstr "Trådløst startet på nytt"
-
-msgid "Wireless shut down"
-msgstr "Trådløst er slått av"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Skriv mottatte DNS forespørsler til syslog"
-
-msgid "XR Support"
-msgstr "XR Støtte"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Her kan du aktivere eller deaktivere installerte oppstartsskript. Enheten må "
-"omstartes før endringene blir tatt i bruk.<br /><strong>Advarsel: Om du "
-"deaktiverer nødvendige init skript som f.eks. \"nettverk\", kan enheten bli "
-"utilgjengelig! </strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Du må aktivere Java Script i nettleseren din ellers vil ikke LuCI fungere "
-"skikkelig."
-
-msgid "any"
-msgstr "enhver"
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "brokoblet"
-
-msgid "create:"
-msgstr "opprett:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "Oppretter en bro mellom angitte grensesnitt"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "Deaktiver"
-
-msgid "expired"
-msgstr "utgått"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"filen der gitt <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leier vil bli lagret"
-
-msgid "forward"
-msgstr "videresend"
-
-msgid "full-duplex"
-msgstr "full-dupleks"
-
-msgid "half-duplex"
-msgstr "halv-dupleks"
-
-msgid "help"
-msgstr "Hjelp"
-
-msgid "hidden"
-msgstr "skjult"
-
-msgid "if target is a network"
-msgstr "Dersom målet er et nettverk"
-
-msgid "input"
-msgstr "inndata"
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "lokal <abbr title=\"Domain Navn System\">DNS</abbr>-fil"
-
-msgid "no"
-msgstr "nei"
-
-msgid "no link"
-msgstr "ingen forbindelse"
-
-msgid "none"
-msgstr "ingen"
-
-msgid "off"
-msgstr "av"
-
-msgid "on"
-msgstr "på"
-
-msgid "open"
-msgstr "åpen"
-
-msgid "routed"
-msgstr "rutet"
-
-msgid "tagged"
-msgstr "tagget"
-
-msgid "unknown"
-msgstr "ukjent"
-
-msgid "unlimited"
-msgstr "ubegrenset"
-
-msgid "unspecified"
-msgstr "uspesifisert"
-
-msgid "unspecified -or- create:"
-msgstr "uspesifisert --eller-- opprett:"
-
-msgid "untagged"
-msgstr "utagget"
-
-msgid "yes"
-msgstr "ja"
-
-msgid "« Back"
-msgstr "« Tilbake"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Venter på ruter..."
-
-#~ msgid "Active Leases"
-#~ msgstr "Aktive leier"
-
-#~ msgid "Open"
-#~ msgstr "Åpne"
-
-#~ msgid "KB"
-#~ msgstr "KB"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Bithastighet"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Konfigurasjon / Bruk"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Konfigurasjon / Endringer"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Konfigurasjon / Tilbakestill"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC adresse"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">Kryptert</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Skanning"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Velg det nettverket du ønsker å knytte til dette trådløse grensesnittet. "
-#~ "Velg <em>uspesifisert</em> for ikke tilknytte noe nettverk, eller fyll ut "
-#~ "<em>opprett</em> feltet for å definere et nytt nettverk."
-
-#~ msgid "Create Network"
-#~ msgstr "Opprett Nettverk"
-
-#~ msgid "Link"
-#~ msgstr "Link"
-
-#~ msgid "Networks"
-#~ msgstr "Nettverk"
-
-#~ msgid "Power"
-#~ msgstr "Styrke"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Trådløse nettverk i nærheten av deg"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notasjon: "
-#~ "adresse/prefiks"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Kringkasting"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Adresse"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "IP aliaser"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "IPv6 oppsett"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Vær oppmerksom på at om du velger et grensesnitt som allerede er med et "
-#~ "annet nettverk, blir det flyttet til dette nettverket"
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Fjerne dette grensesnittet? Slettingen kan ikke omgjøres!\\nDu kan miste "
-#~ "kontakten med ruteren om du er tilkoblet via dette grensesnittet."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Fjerne dette trådløse nettverket? Slettingen kan ikke omgjøres!\\nDu kan "
-#~ "miste kontakten med ruteren om du er tilkoblet via dette nettverket."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Slå av dette grensesnittet? \"%s\" ?\\nDu kan miste kontakten med ruteren "
-#~ "om du er tilkoblet via dette grensesnittet."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Nettverks portene på ruteren kan kombineres til flere <abbr title=\"Virtual "
-#~ "Lokal Network\">VLAN</abbr>s der datamaskiner kan kommunisere direkte med "
-#~ "hverandre. <abbr title=\"Virtual Lokal Network\">VLAN</abbr>s brukes ofte for "
-#~ "å skille ulike nettverk segmenter. Det er vanlig og ha en uplink-port for "
-#~ "tilkobling til større nettverk som internett og andre porter til lokalt "
-#~ "nettverk."
-
-#~ msgid "Custom Files"
-#~ msgstr "Egendefinerte Filer"
-
-#~ msgid "Custom files"
-#~ msgstr "Egendefinerte filer"
-
-#~ msgid "Detected Files"
-#~ msgstr "Filer funnet"
-
-#~ msgid "Detected files"
-#~ msgstr "Filer funnet"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Beholde filer ved programvare oppgradering"
-
-#~ msgid "General"
-#~ msgstr "Generelt"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr "Her kan du endre innstillinger og funksjonaliteten til LuCI."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Aktiver endringer"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr ""
-#~ "Følgende filer er oppdaget av systemet og vil automatisk bli bevart under "
-#~ "systemoppgradering"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Disse endringene vil bli utført automatisk når en <abbr title=\"Unified "
-#~ "Configuration Interface\">UCI</abbr> konfigurasjon brukes, endringen trer "
-#~ "i kraft umiddelbart."
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr ""
-#~ "Dette er en liste med filer og regler som skal inkluderes ved "
-#~ "systemoppgradering"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web Brukergrensesnitt"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "AHCP Innstillinger"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "ARP ping forsøk"
-
-#~ msgid "ATM Settings"
-#~ msgstr "<abbr title=\"Asynchronous Transfer Mode\">ATM</abbr>Innstillinger"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "Godta Ruter Annonseringer"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Aksesspunkt (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Andre pppd alternativer"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "Det tillatte området er 1 til FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Automatisk nedkobling"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Sikkerhetskopi arkiv"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Konfigurer den lokale DNS-serveren slik at den bruker navnetjeneren som "
-#~ "blir gitt av PPP peer"
-
-#~ msgid "Connect script"
-#~ msgstr "Oppkoblings skript"
-
-#~ msgid "Create backup"
-#~ msgstr "Lag sikkerhetskopi"
-
-#~ msgid "Default"
-#~ msgstr "Standard"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Frakoblings skript"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Endre pakke-liste og installasjon mål"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "Aktiver 4K VLANs"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Aktiver IPv6 på PPP lenke"
-
-#~ msgid "Firmware image"
-#~ msgstr "Firmware fil"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "Videresend DHCP"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "Videresend broadcast"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "HE.net Tunnel ID"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Her kan du ta sikkerhetskopi og gjenopprette ruterens konfigurasjon og -"
-#~ "om mulig- tilbakestille ruteren til standardinnstillingene."
-
-#~ msgid "Installation targets"
-#~ msgstr "Installasjon mål"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Behold konfigurasjonsfiler"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid "Kernel"
-#~ msgstr "Kjerne"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Etter vellykket oppkobling, la pppd erstatte standard rute og sett den "
-#~ "opp for PPP-grensesnittet"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "La pppd kjøre dette skriptet etter PPP oppkobling"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "La pppd kjøre dette skriptet før frakobling av PPP lenke"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Pass på at du oppgir riktig PIN-kode her, om ikke kan du låse SIM-kortet!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "De fleste av dem er nettverkstjenere som tilbyr tjenester på enheten "
-#~ "eller nettverket. Som f.eks. shell tilgang, webserver for <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, mesh ruting, sende e-"
-#~ "post, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Antallet mislykkede forsøk på forbindelse før automatisk oppkobling blir "
-#~ "initiert."
-
-#~ msgid "Override Gateway"
-#~ msgstr "Overstyr Gateway"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN kode"
-
-#~ msgid "PPP Settings"
-#~ msgstr "PPP Innstillinger"
-
-#~ msgid "Package lists"
-#~ msgstr "Pakke-lister"
-
-#~ msgid ""
-#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
-#~ "VLAN ID added to received untagged frames."
-#~ msgstr ""
-#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> spesifiserer standard "
-#~ "VLAN ID som legges på mottatte utaggete ethernet-rammer.<br />"
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "Port PVIDs på %q"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Fortsette tilbakestilling av alle innstillinger til standard?"
-
-#~ msgid "Processor"
-#~ msgstr "Prosessor"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-Port"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-Server"
-
-#~ msgid "Relay Settings"
-#~ msgstr "Relay Innstillinger"
-
-#~ msgid "Replace default route"
-#~ msgstr "Erstatt standard rute"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Tilbakestill ruteren til standard innstilling"
-
-#~ msgid "Routing table ID"
-#~ msgstr "Ruting tabell ID"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "Antall sekunder en må vente før modemet er klar for oppkobling"
-
-#~ msgid "Send Router Solicitiations"
-#~ msgstr "Send Ruter Anmodninger"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "Server IPv4-Adresse"
-
-#~ msgid "Service type"
-#~ msgstr "Tjeneste type"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Tjenester og daemoner utfører forskjellige oppgaver på enheten."
-
-#~ msgid "Settings"
-#~ msgstr "Innstillinger"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Initialiserings ventetid"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Beklager. OpenWrt støtter ikke systemoppgradering på denne plattformen."
-#~ "<br /> Du må flashe enheten manuelt."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Angi flere kommandolinje argumenter for pppd her"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "Node enheten for modemet, f.eks. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "Tid (i sekunder) før ubrukt forbindelse vil bli frakoblet"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "Tids Server (rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "Tunnel Innstillinger"
-
-#~ msgid "Update package lists"
-#~ msgstr "Oppdater pakke-listene"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr ""
-#~ "Last opp en OpenWrt Firmware fil, som deretter blir brukt til å "
-#~ "oppgradere enheten."
-
-#~ msgid "Upload image"
-#~ msgstr "Last opp firmware"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Bruk peer DNS"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr ""
-#~ "Her kan du definere flere DNS servere, trykk 'Enter' for å legge til en "
-#~ "ny oppføring. Servere definert her vil overstyre de automatisk tildelte."
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Du må installere \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA eller \"pptp\" for PPtP støtte"
-
-#~ msgid "back"
-#~ msgstr "tilbake"
-
-#~ msgid "buffered"
-#~ msgstr "bufret"
-
-#~ msgid "cached"
-#~ msgstr "hurtigbufrede"
-
-#~ msgid "free"
-#~ msgstr "tilgjengelig"
-
-#~ msgid "static"
-#~ msgstr "Statisk"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> er en samling av "
-#~ "fri Lua programvare som inkluderer <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework og webgrensnitt for innebygde enheter. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> er lisensert under "
-#~ "Apache-lisensen."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-Nøkler"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr "En lettvekts HTTP/1.1 webserver skrevet i C og Lua laget for LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "En lettvekts webserver som kan brukes til å tjene <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "Om"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "Aktive IP tilkoblinger"
-
-#~ msgid "Addresses"
-#~ msgstr "Adresser"
-
-#~ msgid "Admin Password"
-#~ msgstr "Admin Passord"
-
-#~ msgid "Alias"
-#~ msgstr "Alias"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Passord beskyttet område"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Bro Port"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "Endre passordet for systemansvarlig (Bruker <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Klient + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Konfigurasjonsfil"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Tidsavbrudd for tilkobling"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Medvirkende utviklere"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP tildelt"
-
-#~ msgid "Document root"
-#~ msgstr "Dokument-roten"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Aktiver Keep-Alive"
-
-#~ msgid "Enable device"
-#~ msgstr "Aktiver enhet"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Ethernet Bro"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Her kan du lime inn felles <abbr title=\"Secure Shell\">SSH</abbr>-nøkler "
-#~ "(en per linje) for <abbr title=\"Secure Shell\">SSH</abbr> godkjenning."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP Konfigurasjon"
-
-#~ msgid "Interface Status"
-#~ msgstr "Grensesnitt Status"
-
-#~ msgid "Lead Development"
-#~ msgstr "Hovedutviklere"
-
-#~ msgid "Master"
-#~ msgstr "Aksesspunkt"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Aksesspunkt + WDS"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "Ingen adresse er konfigurert på dette grensesnittet."
-
-#~ msgid "Not configured"
-#~ msgstr "Ikke konfigurert"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Passordet er endret"
-
-#~ msgid "Plugin path"
-#~ msgstr "Plugin sti"
-
-#~ msgid "Ports"
-#~ msgstr "Porter"
-
-#~ msgid "Primary"
-#~ msgstr "Primær"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Prosjektets Hjemmeside"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Takk til"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr "Beskrivelse av passord beskyttet område, vises ved innlogging."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Ukjent feil"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "Standard <code>/etc/httpd.conf</code>"
-
-#~ msgid "Enable this switch"
-#~ msgstr "Aktiver denne svitsj"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG feil kode %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Pakke-listene oppdatert"
-
-#~ msgid "Reset switch during setup"
-#~ msgstr "Nullstill svitsj under oppstart"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Oppgrader installerte pakker"
diff --git a/po/no/commands.po b/po/no/commands.po
deleted file mode 100644
index 29b76e5..0000000
--- a/po/no/commands.po
+++ /dev/null
@@ -1,98 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-25 23:38+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language-Team: none\n"
-"Language: no\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr "En kort tekstlig beskrivelse av den konfigurerte kommandoen"
-
-msgid "Access command with"
-msgstr "Åpne kommandoen med"
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-"Tillat å utføre kommandoen og laste ned resultatet uten forutgående "
-"godkjenning"
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr "Tillat brukeren å gi ytterligere kommandolinjeargumenter"
-
-msgid "Arguments:"
-msgstr "Argumenter:"
-
-msgid "Binary data not displayed, download instead."
-msgstr "Binære data vises ikke, last ned i stedet."
-
-msgid "Code:"
-msgstr "Kode:"
-
-msgid "Collecting data..."
-msgstr "Henter data..."
-
-msgid "Command"
-msgstr "Kommando"
-
-msgid "Command failed"
-msgstr "Kommando feilet"
-
-msgid "Command line to execute"
-msgstr "Kommandolinje å utføre"
-
-msgid "Command successful"
-msgstr "Kommando vellykket"
-
-msgid "Command:"
-msgstr "Kommando:"
-
-msgid "Configure"
-msgstr "Konfigurer"
-
-msgid "Custom Commands"
-msgstr "Egendefinerte Kommandoer"
-
-msgid "Custom arguments"
-msgstr "Egendefinerte argumenter"
-
-msgid "Dashboard"
-msgstr "Dashboard"
-
-msgid "Description"
-msgstr "Beskrivelse"
-
-msgid "Download"
-msgstr "Nedlasting"
-
-msgid "Failed to execute command!"
-msgstr "Kunne ikke utføre kommandoen!"
-
-msgid "Link"
-msgstr "Link"
-
-msgid "Loading"
-msgstr "Laster"
-
-msgid "Public access"
-msgstr "Tilgjengelig for alle"
-
-msgid "Run"
-msgstr "Kjør"
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-"Denne siden lar deg konfigurere egendefinerte shell-kommandoer som lett kan "
-"startes fra webgrensesnittet."
-
-msgid "Waiting for command to complete..."
-msgstr "Venter på at kommandoen fullføres..."
diff --git a/po/no/coovachilli.po b/po/no/coovachilli.po
deleted file mode 100644
index ae42a82..0000000
--- a/po/no/coovachilli.po
+++ /dev/null
@@ -1,23 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "CoovaChilli"
-msgstr ""
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
diff --git a/po/no/ddns.po b/po/no/ddns.po
deleted file mode 100644
index 9744855..0000000
--- a/po/no/ddns.po
+++ /dev/null
@@ -1,78 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Check for changed IP every"
-msgstr "Undersøk om IP er endret hver"
-
-msgid "Check-time unit"
-msgstr "Tidsenhet"
-
-msgid "Custom update-URL"
-msgstr "Egendefinert oppdaterings-URL"
-
-msgid "Dynamic DNS"
-msgstr "Dynamisk DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Dynamisk DNS tillater at enheten kan kontaktes ved hjelp av et fast "
-"vertsnavn, uavhengig av om IP adressen endres dynamisk."
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "Tving oppdatering hver"
-
-msgid "Force-time unit"
-msgstr "Tidsenhet"
-
-msgid "Hostname"
-msgstr "Vertsnavn"
-
-msgid "Interface"
-msgstr "Grensesnitt"
-
-msgid "Network"
-msgstr "Nettverk"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr "Passord"
-
-msgid "Service"
-msgstr "Tjeneste"
-
-msgid "Source of IP address"
-msgstr "Kilden til IP adresse"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Brukernavn"
-
-msgid "custom"
-msgstr "egendefinert"
-
-msgid "h"
-msgstr "timer"
-
-msgid "interface"
-msgstr "grensesnitt"
-
-msgid "min"
-msgstr "minutter"
-
-msgid "network"
-msgstr "nettverk"
diff --git a/po/no/diag_core.po b/po/no/diag_core.po
deleted file mode 100644
index 4955d47..0000000
--- a/po/no/diag_core.po
+++ /dev/null
@@ -1,35 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configure Diagnostics"
-msgstr "Konfigurer Diagnostikk"
-
-msgid "Diagnostics"
-msgstr "Diagnostikk"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Diagnostikken tilgjengelig under denne menyen avhenger av hvilke moduler du "
-"har installert på enheten."
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Oppføringene i menyen lar deg utføre diagnostiske tester på systemet ditt "
-"til hjelp ved feilsøking."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Her kan du konfigurere nettverks diagnostikk, som skanning etter nettverks "
-"enheter og ping tester."
-
-#~ msgid "l_d_diag"
-#~ msgstr "Nettverks Diagnostikk"
diff --git a/po/no/diag_devinfo.po b/po/no/diag_devinfo.po
deleted file mode 100644
index 4ada96b..0000000
--- a/po/no/diag_devinfo.po
+++ /dev/null
@@ -1,213 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Actions"
-msgstr "Handlinger"
-
-msgid "Add"
-msgstr "Legg til"
-
-msgid "Beginning of MAC address range"
-msgstr "Begynnelsen av MAC adresseområde"
-
-msgid "Config Phone Scan"
-msgstr "Konfigurer Telefon Skanning"
-
-msgid "Configure"
-msgstr "Konfigurer"
-
-msgid "Configure Scans"
-msgstr "Konfigurer Skanning"
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-"Konfigurer skanning etter enheter på angitte nettverk. Ved å minske verdiene "
-"til 'Tidsavbrudd', 'Gjentagelser' og/eller Tid mellom forespørsler blir "
-"skanningen utført raskere, men det kan også medføre at noen enheter ikke "
-"blir funnet."
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-"Konfigurer skanning etter støttede SIP enheter på angitte nettverk. Ved å "
-"minske verdiene til 'Tidsavbrudd', 'Gjentagelser' og/eller tid mellom "
-"forespørsler blir skanningen utført raskere, men det kan også medføre at "
-"noen enheter ikke blir funnet."
-
-msgid "Delete"
-msgstr "Slett"
-
-msgid "Device Scan Config"
-msgstr "Enhets skann konfigurasjon"
-
-msgid "Device Type"
-msgstr "Enhets type"
-
-msgid "Devices discovered for"
-msgstr "Enheter oppdaget for"
-
-msgid "Devices on Network"
-msgstr "Enheter i Nettverket"
-
-msgid "Edit"
-msgstr "Rediger"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "End of MAC address range"
-msgstr "Slutten av MAC område"
-
-msgid "Go to relevant configuration page"
-msgstr "Gå til relevant konfigurasjons side"
-
-msgid "IP Address"
-msgstr "IP Adresse"
-
-msgid "Interface"
-msgstr "Grensesnitt"
-
-msgid "Invalid"
-msgstr "Ugyldig"
-
-msgid "Link to Device"
-msgstr "Link til Enhet"
-
-msgid "MAC Address"
-msgstr "MAC Adresse"
-
-msgid "MAC Device Info Overrides"
-msgstr "MAC Enhets Info Overstyring"
-
-msgid "MAC Device Override"
-msgstr "MAC Enhets Overstyring"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"MAC område og informasjon brukt til å overstyre system og IEEE databaser"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Antall millisekunder ventetid mellom forespørsler (standard 100)"
-
-msgid "Model"
-msgstr "Modell"
-
-msgid "Name"
-msgstr "Navn"
-
-msgid "Network Device Scan"
-msgstr "Nettverks Enhets Skanning"
-
-msgid "Network Device Scanning Configuration"
-msgstr "Nettverks Enhets Skanning Konfigurasjon"
-
-msgid "Networks to scan for devices"
-msgstr "Nettverk som blir skannet"
-
-msgid "Networks to scan for supported devices"
-msgstr "Nettverk som blir skannet for støttede enheter"
-
-msgid "No SIP devices"
-msgstr "Ingen SIP enheter"
-
-msgid "No devices detected"
-msgstr "Ingen enheter oppdaget"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Antall ganger å sende forespørsel (standard 1)"
-
-msgid "OUI Owner"
-msgstr "OUI Eier"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Overstyr informasjonen hentet fra MAC til enhets info skriptet (mac-til-"
-"devinfo) for et gitt område med MAC adresser"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr "Utfør Skanning (dette kan ta noen minutter)"
-
-msgid "Phone Information"
-msgstr "Telefon Informasjon"
-
-msgid "Phone Scan"
-msgstr "Telefon skanning"
-
-msgid "Phone Scanning Configuration"
-msgstr "Telefon skanning konfigurasjon"
-
-msgid "Phones"
-msgstr "Telefoner"
-
-msgid "Ports"
-msgstr "Porter"
-
-msgid "Raw"
-msgstr "Rå"
-
-msgid "Repeat Count"
-msgstr "Gjentagelser"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr "Gjennta Skanning (dette kan ta noen minutter)"
-
-msgid "SIP Device Information"
-msgstr "SIP Enhets Informasjon"
-
-msgid "SIP Device Scan"
-msgstr "SIP Enhets Skanning"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "SIP Enhets Skann Konfigurasjon"
-
-msgid "SIP Devices on Network"
-msgstr "SIP Enheter i Nettverket"
-
-msgid "SIP devices discovered for"
-msgstr "SIP enheter oppdaget på"
-
-msgid "Scan for devices on specified networks."
-msgstr "Skann etter enheter på spesifiserte nettverk"
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr "Skann etter SIP enheter på spesifiserte nettverk"
-
-msgid "Scanning Configuration"
-msgstr "Skanning Konfigurasjon"
-
-msgid "Scans for devices on specified networks."
-msgstr "Nettverks Skanning Informasjon"
-
-msgid "Sleep Between Requests"
-msgstr "Tid mellom forespørsler"
-
-msgid "Subnet"
-msgstr "Subnett"
-
-msgid "This section contains no values yet"
-msgstr "Denne seksjonen inneholder ennå ingen verdier"
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Tid for å vente på svar i sekunder (standard 10)"
-
-msgid "Timeout"
-msgstr "Tidsavbrudd"
-
-msgid "Use Configuration"
-msgstr "Bruk Konfigurasjonen"
-
-msgid "Vendor"
-msgstr "Leverandør"
-
-msgid "check other networks"
-msgstr "skjekk andre nettverk"
diff --git a/po/no/ffwizard.po b/po/no/ffwizard.po
deleted file mode 100644
index 3b13704..0000000
--- a/po/no/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/no/firewall.po b/po/no/firewall.po
deleted file mode 100644
index 19b2e77..0000000
--- a/po/no/firewall.po
+++ /dev/null
@@ -1,560 +0,0 @@
-msgid ""
-msgstr ""
-"PO-Revision-Date: 2013-03-25 16:42+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language: no\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr "%s i %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s med %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s i %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(oppføring uten navn)"
-
-msgid "(Unnamed Rule)"
-msgstr "(regel uten navn)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(SNAT uten navn)"
-
-msgid "-- Please choose --"
-msgstr "-- Vennligst velg --"
-
-msgid "-- custom --"
-msgstr "-- egendefinert --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> pakker per <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr "<var>%d</var> pakker per <var>%s</var>, burst <var>%d</var>pakker."
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> og begrens til %s"
-
-msgid "Action"
-msgstr "Handling"
-
-msgid "Add"
-msgstr "Legg til"
-
-msgid "Add and edit..."
-msgstr "Legg til og redigere..."
-
-msgid "Advanced Settings"
-msgstr "Avanserte Innstillinger"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Tillat videresending fra <em>kilde soner</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Tillat videresending til <em>destinasjon soner</em>:"
-
-msgid "Any"
-msgstr "Enhver"
-
-msgid "Covered networks"
-msgstr "Gjeldene nettverk"
-
-msgid "Custom Rules"
-msgstr "Egendefinerte Regler"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Egendefinerte regler tillater deg å utføre vilkårlige iptables kommandoer "
-"som ikke dekkes av brannmurens standardoppsett. Kommandoene utføres etter "
-"hver omstart av brannmuren, rett etter at standard regelsett er lastet."
-
-msgid "Destination IP address"
-msgstr "Destinasjon IP adresse"
-
-msgid "Destination address"
-msgstr "Destinasjon adresse"
-
-msgid "Destination port"
-msgstr "Destinasjon port"
-
-msgid "Destination zone"
-msgstr "Destinasjon sone"
-
-msgid "Do not rewrite"
-msgstr "Ikke omskriv"
-
-msgid "Drop invalid packets"
-msgstr "Forkast ugyldige pakker"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Enable NAT Loopback"
-msgstr "Aktiver NAT <abbr title=\"Loopback\">Tilbakekobling</abbr>"
-
-msgid "Enable SYN-flood protection"
-msgstr "Aktiver SYN-flood beskyttelse"
-
-msgid "Enable logging on this zone"
-msgstr "Aktiver logging av denne sonen"
-
-msgid "External IP address"
-msgstr "Ekstern IP adressse"
-
-msgid "External port"
-msgstr "Ekstern port"
-
-msgid "External zone"
-msgstr "Ekstern sone"
-
-msgid "Extra arguments"
-msgstr "Ekstra argumenter"
-
-msgid "Firewall"
-msgstr "Brannmur"
-
-msgid "Firewall - Custom Rules"
-msgstr "Brannmur - Egendefinerte Regler"
-
-msgid "Firewall - Port Forwards"
-msgstr "Brannmur - Port Videresending"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Brannmur - Trafikk Regler"
-
-msgid "Firewall - Zone Settings"
-msgstr "Brannmur - Sone Innstillinger"
-
-msgid "Force connection tracking"
-msgstr "Bruk <abbr title=\\\"connection tracking\\\">forbindelse sporing</abbr>"
-
-msgid "Forward"
-msgstr "Videresend"
-
-msgid "Forward to"
-msgstr "Videresend til"
-
-msgid "From %s in %s"
-msgstr "Fra %s i %s"
-
-msgid "From %s in %s with source %s"
-msgstr "Fra %s i %s med kilde %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "Fra %s i %s med kilde %s og %s"
-
-msgid "General Settings"
-msgstr "Generelle Innstillinger"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 og IPv6"
-
-msgid "IPv4 only"
-msgstr "Kun IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "Kun IPv6"
-
-msgid "Input"
-msgstr "Inndata"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Sone til Sone Videresending"
-
-msgid "Internal IP address"
-msgstr "Intern IP adresse"
-
-msgid "Internal port"
-msgstr "Intern port"
-
-msgid "Internal zone"
-msgstr "Intern sone"
-
-msgid "Limit log messages"
-msgstr "Begrens logging"
-
-msgid "MSS clamping"
-msgstr "MSS Kontroll (Clamping)"
-
-msgid "Masquerading"
-msgstr "Masquerading"
-
-msgid "Match"
-msgstr "Match"
-
-msgid "Match ICMP type"
-msgstr "Match ICMP type"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-"Match videresendt trafikk til den oppgitte destinasjonsport eller "
-"portområdet."
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Match innkommende trafikk rettet mot den oppgitte destinasjonsport eller "
-"portområdet på denne verten"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Match innkommende trafikk som kommer fra den oppgitte kildeport eller "
-"portområdet på klienten."
-
-msgid "Name"
-msgstr "Navn"
-
-msgid "New SNAT rule"
-msgstr "Ny SNAT regel"
-
-msgid "New forward rule"
-msgstr "Ny videresending regel"
-
-msgid "New input rule"
-msgstr "Ny inndata regel"
-
-msgid "New port forward"
-msgstr "Ny port videresending"
-
-msgid "New source NAT"
-msgstr "Ny kilde NAT"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "Match kun innkommende trafikk rettet mot den oppgitt IP adresse."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Match kun innkommende trafikk fra disse MAC adresser."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr "Match kun innkommende trafikk fra denne IP eller IP område."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Match kun innkommende trafikk som kommer fra den oppgitte kildeport eller "
-"fra portområdet til klienten"
-
-msgid "Open ports on router"
-msgstr "Åpne porter på ruteren"
-
-msgid "Other..."
-msgstr "Andre..."
-
-msgid "Output"
-msgstr "Utdata"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr "Sender flere argumenter til iptables. Bruk med forsiktighet!"
-
-msgid "Port Forwards"
-msgstr "Port Videresendinger"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"Port videresending tillater at eksterne datamaskiner på Internett kan koble "
-"seg til en bestemt maskin eller tjeneste innenfor det private LAN."
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Viderekoble matchet innkommende trafikk til den oppgitte porten på intern "
-"vert"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Viderekoble matchet innkommende trafikk til den angitte interne vert"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Begrens Masquerading til oppgitt destinasjons subnett"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Begrens Masqeuerading til oppgitt kilde subnett"
-
-msgid "Restrict to address family"
-msgstr "Begrens til adresse familie"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "Omskriv matchet trafikk til den oppgitte adressen."
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Omskriv matchet trafikk til den oppgitte kildeport. Kan stå tom for kun "
-"omskriving av IP adressen."
-
-msgid "Rewrite to source %s"
-msgstr "Omskriv til kilde %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "Omskriv til kilde %s, %s"
-
-msgid "SNAT IP address"
-msgstr "SNAT IP adresse"
-
-msgid "SNAT port"
-msgstr "SNAT port"
-
-msgid "Source IP address"
-msgstr "Kilde IP adresse"
-
-msgid "Source MAC address"
-msgstr "Kilde MAC adresse"
-
-msgid "Source NAT"
-msgstr "Kilde NAT"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"Kilde NAT er en spesifikk form for masquerading som tillater finkornet "
-"kontroll over kilde IP adressen som brukes for utgående trafikk, for "
-"eksempel for å mappe flere WAN adresser til interne subnett."
-
-msgid "Source address"
-msgstr "Kilde adresse"
-
-msgid "Source port"
-msgstr "Kilde port"
-
-msgid "Source zone"
-msgstr "Kilde sone"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"Brannmuren skaper soner over nettverkets grensesnitt for å styre "
-"nettverkstrafikken."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"Med valgene under konfigurerer man videresending mellom denne sone (%s) og "
-"andre soner. <em>Destinasjons soner</em> omhandler videresendt trafikk "
-"<strong>med opprinnelse fra %q</strong>. <em>Kilde soner</em> matcher "
-"videresendt trafikk fra andre soner <strong>rettet mot %q</strong>. Reglene "
-"ved videresending er <em>enveis</em>, d.v.s at videresending fra LAN til WAN "
-"<em>ikke</em> automatisk også tillater videresending fra WAN til LAN."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"Denne siden lar deg endre avanserte egenskaper til port videresending "
-"oppføringer. I de fleste tilfeller er det ikke nødvendig å endre disse "
-"innstillingene."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"Denne siden lar deg endre de avanserte egenskapene til trafikken regel "
-"oppføringer, som for eksempel matchet kilde og destinasjons vert."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Denne seksjonen definerer de vanligste valg for %q. Med <em>Inndata</em> og "
-"<em>Utdata</em> fastsetter man vanlige regler for trafikk gjennom sonen, "
-"mens <em>videresend</em> valget definerer regler for videresendt trafikk "
-"mellom forskjellige nettverk i sonen. <em>Gjeldene nettverk</em> "
-"spesifiserer hvilken av de tilgjengelige nettverk som er medlem av denne "
-"sone."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "Til %s på %s på <var>denne enheten</var>"
-
-msgid "To %s in %s"
-msgstr "Til %s i %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "Til %s på <var>denne enheten</var>"
-
-msgid "To %s, %s in %s"
-msgstr "Til %s, %s i %s"
-
-msgid "To source IP"
-msgstr "Til kilde IP"
-
-msgid "To source port"
-msgstr "Til kilde port"
-
-msgid "Traffic Rules"
-msgstr "Trafikk Regler"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"Trafikk regler definerer regler for sending av pakker mellom ulike soner, "
-"for eksempel for å avvise trafikk mellom visse verter eller for å åpne WAN "
-"porter på ruteren."
-
-msgid "Via %s"
-msgstr "Via %s"
-
-msgid "Via %s at %s"
-msgstr "Via %s på %s"
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Du kan spesifisere flere ved å velge \"-- egendefinert --\" og deretter skrive "
-"flere protokoller atskilt med mellomrom."
-
-msgid "Zone %q"
-msgstr "Sone %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Sone = Videresendinger"
-
-msgid "Zones"
-msgstr "Soner"
-
-msgid "accept"
-msgstr "godta"
-
-msgid "any"
-msgstr "enhver"
-
-msgid "any host"
-msgstr "enhver vert"
-
-msgid "any router IP"
-msgstr "enhver ruter IP"
-
-msgid "any zone"
-msgstr "enhver sone"
-
-msgid "don't track"
-msgstr "ikke track"
-
-msgid "drop"
-msgstr "forkast"
-
-msgid "reject"
-msgstr "avslå"
-
-#~ msgid "Destination"
-#~ msgstr "Destinasjon"
-
-#~ msgid "Family"
-#~ msgstr "Adressefamilie"
-
-#~ msgid "Source"
-#~ msgstr "Kilde"
-
-#~ msgid "Via"
-#~ msgstr "Via"
-
-#~ msgid "(optional)"
-#~ msgstr "(valgfritt)"
-
-#~ msgid "Intended destination address"
-#~ msgstr "Ønsket destinasjon adresse"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Intern port (valgfritt)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Avanserte Valg"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Avanserte Regler"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Avanserte regler lar deg tilpasse brannmuren til dine behov. Kun nye "
-#~ "tilkoblinger blir berørt. Pakker som tilhører eksisterende tilkoblinger "
-#~ "slipper derfor igjennom brannmuren."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Egendefinerte Regler (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Enhet"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "DNAT: Matcher innkommende trafikk som er rettet mot destinasjons IP-adressen "
-#~ "du angir her. SNAT: Omskriver kilde IP-adressen slik at den blir lik den "
-#~ "IP-adressen du angir her."
-
-#~ msgid ""
-#~ "Match incoming traffic originating from the given source port or port "
-#~ "range on the client host"
-#~ msgstr "Match innkommende trafikk som kommer fra dette port/portområde"
-
-#~ msgid "Overview"
-#~ msgstr "Oversikt"
-
-#~ msgid "Port forwarding"
-#~ msgstr "Port Videresending"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "<abbr title=\"Port Forwarding\">Port Videresending</abbr> tillater at "
-#~ "tjenester fra det interne nettverket kan tilbys et eksternt nettverk."
-
-#~ msgid "Redirection type"
-#~ msgstr "Omadressering type"
-
-#~ msgid "Redirections"
-#~ msgstr "Omadresseringer"
-
-#~ msgid "Rules"
-#~ msgstr "Regler"
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Trafikk Omadressering"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "<abbr title=\"Traffic Redirection\">Trafikk Omadressering</abbr> lar deg endre "
-#~ "destinasjons adresse på videresendte pakker."
diff --git a/po/no/freifunk-policyrouting.po b/po/no/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/no/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/no/freifunk.po b/po/no/freifunk.po
deleted file mode 100644
index e251b39..0000000
--- a/po/no/freifunk.po
+++ /dev/null
@@ -1,424 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr "Grunnleggende Innstillinger"
-
-msgid "Basic settings"
-msgstr "Grunnleggende innstillinger"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Grunnleggende innstillinger er mangelfull. Gå til"
-
-msgid "Basic system settings"
-msgstr "Grunnleggende system innstillinger"
-
-msgid "Bitrate"
-msgstr "Bithastighet"
-
-msgid "Channel"
-msgstr "Kanal"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr "Se etter nye firmware-versjoner og utfør automatiske oppdatering."
-
-msgid "Client network size"
-msgstr "Klient nettverk størrelse"
-
-msgid "Community"
-msgstr "Sted"
-
-msgid "Community profile"
-msgstr "Sted profil"
-
-msgid "Community settings"
-msgstr "Sted innstillinger"
-
-msgid "Confirm Upgrade"
-msgstr "Bekreft Oppgradering"
-
-msgid "Contact"
-msgstr "Kontakt"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr "Kontaktinformasjonen er mangelfull. Gå til"
-
-msgid "Coordinates"
-msgstr "Koordinater"
-
-msgid "Country code"
-msgstr "Landskode"
-
-msgid "Default routes"
-msgstr "Standard ruter"
-
-msgid "Disable default content"
-msgstr "Deaktiver standard innhold"
-
-msgid "Diversity is enabled for device"
-msgstr "Antennevariasjon er aktivert på enhet"
-
-msgid "E-Mail"
-msgstr "E-Post"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr "Rediger indeks side"
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr "Feil"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "Finn koordinatene dine med OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "Freifunk"
-
-msgid "Freifunk Overview"
-msgstr "Freifunk Oversikt"
-
-msgid "Freifunk Remote Update"
-msgstr "Freifunk Fjernkontrollert Oppgradering"
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "Go to"
-msgstr "Gå til"
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Hei og velkommen til nettverket av"
-
-msgid "Hide OpenStreetMap"
-msgstr "Skjul OpenStreetMap"
-
-msgid "Homepage"
-msgstr "Hjemmeside"
-
-msgid "Hostname"
-msgstr "Vertsnavn"
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr "Om valgt vises ikke det vanlige innholdselementet"
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Hvis du er interessert i prosjektet vårt så ta kontakt med en lokale gruppe "
-"på"
-
-msgid "Index Page"
-msgstr "Indeks Side"
-
-msgid "Interface"
-msgstr "Grensesnitt"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"Internett tilgang er avhengig av tekniske og organisatoriske forhold, defor "
-"er det ikke sikkert det fungerer for deg."
-
-msgid "It is operated by"
-msgstr "Det drives av"
-
-msgid "Keep configuration"
-msgstr "Behold konfigurasjonen"
-
-msgid "Latitude"
-msgstr "Breddegrad"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr "Last"
-
-msgid "Local Time"
-msgstr "Lokal Tid"
-
-msgid "Location"
-msgstr "Sted"
-
-msgid "Longitude"
-msgstr "Lengdegrad"
-
-msgid "Map"
-msgstr "Kart"
-
-msgid "Map Error"
-msgstr "Kart Feil"
-
-msgid "Memory"
-msgstr "Minne"
-
-msgid "Mesh prefix"
-msgstr "Mesh prefiks"
-
-msgid "Metric"
-msgstr "Metrisk"
-
-msgid "Mode"
-msgstr "Modus"
-
-msgid "Network"
-msgstr "Nettverk"
-
-msgid "Network for client DHCP addresses"
-msgstr "Nettverk for klient DHCP adresser"
-
-msgid "Nickname"
-msgstr "Kallenavn"
-
-msgid "No default routes known."
-msgstr "Ingen standard rute er kjent"
-
-msgid "Notice"
-msgstr "Merknad"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr "Oversikt"
-
-msgid "Package libiwinfo required!"
-msgstr "Pakken libiwinfo er nødvendig!"
-
-msgid "Phone"
-msgstr "Telefon"
-
-msgid "Please fill in your contact details below."
-msgstr "Vennligst fyll ut skjema nedenfor."
-
-msgid "Please set your contact information"
-msgstr "Vennligst oppgi din kontaktinformasjon"
-
-msgid "Power"
-msgstr "Styrke"
-
-msgid "Processor"
-msgstr "Prosessor"
-
-msgid "Profile"
-msgstr "Profil"
-
-msgid "Profile (Expert)"
-msgstr "Profil (Ekspert)"
-
-msgid "Realname"
-msgstr "Virkelig Navn"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-"Velg din posisjon med et museklikk på kartet. Kartet vises bare om du er "
-"koblet til internett."
-
-msgid "Show OpenStreetMap"
-msgstr "Vis OpenStreetMap"
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr "Signal"
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr "Start Oppgradering"
-
-msgid "Statistics"
-msgstr "Statistikk"
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr "System"
-
-msgid "TX"
-msgstr "TX"
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-"OLSRd tjenesten er ikke konfigurert til å hente posisjons data fra "
-"nettverket.<br/>Kontroller at navnetjener pluginen er riktig konfigurert og "
-"at <em>latlon_file</em> alternativet er aktivert."
-
-msgid "The installed firmware is the most recent version."
-msgstr "Den installerte firmware er den nyeste versjonen."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-"Dette er de grunnleggende innstillinger for det lokale trådløse stedet. "
-"Disse innstillingene definerer standard verdiene for veiviseren og vil "
-"derfor IKKE gjøre noen endringer på ruteren."
-
-msgid "These are the settings of your local community."
-msgstr "Dette er innstillingene for det lokale stedet"
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-"Disse sidene vil hjelpe deg med å sette opp ruteren til for Freifunk og "
-"lignende trådløse nettverk."
-
-msgid "This is the access point"
-msgstr "Dette er aksess punktet"
-
-msgid "Update Settings"
-msgstr "Oppdater Innstillingene"
-
-msgid "Update available!"
-msgstr "Oppdatering tilgjengelig!"
-
-msgid "Uptime"
-msgstr "Oppetid"
-
-msgid "Verify downloaded images"
-msgstr "Verifiser nedlastede filer"
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Vi er et initiativ for å etablere fri, uavhengig og åpne trådløse mesh-"
-"nettverk."
-
-msgid "Wireless Overview"
-msgstr "Trådløs Oversikt"
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-"Du kan vise ytterligere innhold på den offentlige side ved å legge til "
-"gyldig XHTML med form som vist under.<br />Overskrifter bør legges mellom "
-"&lt;h2&gt; og &lt;/h2&gt;."
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr "Du kan finne mere informasjon om den globale Freifunk initiativ på"
-
-msgid "You can manually edit the selected community profile here."
-msgstr "Du kan manuelt endre den valgte stedsprofilen here"
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-"Du må velge en profil før du kan endre den. For å velge en profil går du til"
-
-msgid "and fill out all required fields."
-msgstr "og fylle ut alle nødvendige felt"
-
-msgid "buffered"
-msgstr "bufret"
-
-msgid "cached"
-msgstr "hurtigbufret"
-
-msgid "e.g."
-msgstr "f.eks."
-
-msgid "free"
-msgstr "tilgjengelig"
-
-msgid "to disable it."
-msgstr "å deaktivere det"
-
-msgid "used"
-msgstr "brukt"
-
-msgid "wireless settings"
-msgstr "trådløse innstillinger"
-
-#~ msgid ""
-#~ "No services can be shown, because olsrd is not running or the olsrd-"
-#~ "nameservice Plugin is not loaded."
-#~ msgstr ""
-#~ "Ingen tjenester kan vises her, dette kan være pga. at olsrd ikke kjører "
-#~ "eller fordi olsrd-navnetjener plugin ikke er lastet."
-
-#~ msgid "Services"
-#~ msgstr "Tjenester"
-
-#~ msgid "Source"
-#~ msgstr "Kilde"
-
-#~ msgid ""
-#~ "The <em>libiwinfo-lua</em> package is not installed. You must install "
-#~ "this component for working wireless configuration!"
-#~ msgstr ""
-#~ "Pakken <em>libiwinfo-lua</em> er ikke installert. Du må installere denne "
-#~ "pakken for å kunne konfigurerer trådløse enheter!"
-
-#~ msgid "Url"
-#~ msgstr "Url"
diff --git a/po/no/hd_idle.po b/po/no/hd_idle.po
deleted file mode 100644
index 24ae1d0..0000000
--- a/po/no/hd_idle.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Disk"
-msgstr "Disk"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Enable debug"
-msgstr "Aktiver feilsøking"
-
-msgid "Idle-time"
-msgstr "Tid inaktiv"
-
-msgid "Idle-time unit"
-msgstr "Tidsenhet"
-
-msgid "Settings"
-msgstr "Innstillinger"
-
-msgid "h"
-msgstr "timer"
-
-msgid "hd-idle"
-msgstr "Hd-Idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle er et verktøy for å spinne ned eksterne disker etter en periode med "
-"inaktivitet."
-
-msgid "min"
-msgstr "minutter"
diff --git a/po/no/meshwizard.po b/po/no/meshwizard.po
deleted file mode 100644
index 180d771..0000000
--- a/po/no/meshwizard.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/no/minidlna.po b/po/no/minidlna.po
deleted file mode 100644
index 4b24712..0000000
--- a/po/no/minidlna.po
+++ /dev/null
@@ -1,189 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-25 17:25+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language-Team: none\n"
-"Language: no\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Avanserte Innstillinger"
-
-msgid "Album art names:"
-msgstr "Albumbilder navn:"
-
-msgid "Announced model number:"
-msgstr "Annonsert modellnummer:"
-
-msgid "Announced serial number:"
-msgstr "Annonsert serienummer:"
-
-msgid "Browse directory"
-msgstr "Bla katalog"
-
-msgid "Collecting data..."
-msgstr "Samler inn data..."
-
-msgid "Database directory:"
-msgstr "Database katalog:"
-
-msgid "Enable TIVO:"
-msgstr "Aktiver TIVO:"
-
-msgid "Enable inotify:"
-msgstr "Aktiver inotify:"
-
-msgid "Enable:"
-msgstr "Aktiver:"
-
-msgid "Friendly name:"
-msgstr "Vennlig navn:"
-
-msgid "General Settings"
-msgstr "Generelle Innstillinger"
-
-msgid "Interfaces:"
-msgstr "Grensesnitt:"
-
-msgid "Log directory:"
-msgstr "Logg katalog:"
-
-msgid "Media directories:"
-msgstr "Media kataloger:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNA er serverprogramvare som sikter på å være fullt kompatibel med DLNA"
-"/UPnP-AV klienter."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Modellnummer som MiniDLNA daemon vil rapportere til klienter. (XML "
-"beskrivelse)"
-
-msgid "Music"
-msgstr "Musikk"
-
-msgid "Network interfaces to serve."
-msgstr "Nettverksgrensesnittene å tjene."
-
-msgid "Notify interval in seconds."
-msgstr "Notify intervall i sekunder."
-
-msgid "Notify interval:"
-msgstr "Notify intervall:"
-
-msgid "Pictures"
-msgstr "Bilder"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "Port for HTTP (beskrivelser, SOAP, media overføring) trafikk."
-
-msgid "Port:"
-msgstr "Port:"
-
-msgid "Presentation URL:"
-msgstr "Presentasjon URL:"
-
-msgid "Root container:"
-msgstr "Root katalog:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Serienummeret miniDLNA daemon vil rapportere til klienter. (XML beskrivelse)"
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr "Her kan en tilpasse navnet som dukker opp på MiniDLNA klientene."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Her kan en spesifisere hvilken katalog som MiniDLNA bruker for å lagre sin "
-"database og albumcover cache."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-"Her kan en definere hvilken katalog som MiniDLNA skal bruke til å lagre log "
-"filen i."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"Her kan en aktivere inotify som overvåker mediakatalogene og dermed "
-"automatisk oppdage om det kommer nytt innhold."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"Her kan en aktivere støtte for strømming av .jpg og .mp3 filer til en TiVo "
-"med HMO støtte."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Her kan en aktivere at en holder seg til DLNA-standarder. Dette vil tillate "
-"server-side nedskalering av svært store JPEG-bilder, noe som kan skade JPEG "
-"serverens ytelse på (minst) Sony DLNA-produkter."
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Her kan en velge den katalogen som blir skannet. Om du ønsker å begrense "
-"katalogen til en spesifikk innholdstype kan sette en bokstav foran ('A' for "
-"lyd, 'V' for video, 'P' for bilder), etterfulgt av et komma og katalogen. "
-"(f.eks media_dir=A,/mnt/media/Musikk). Flere kataloger kan brukes."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "Angi banen til MiniSSDPd socketen."
-
-msgid "Standard container"
-msgstr "Standard container"
-
-msgid "Strict to DLNA standard:"
-msgstr "Streng overholdelse av DLNA-standarden:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"MiniDLNA tjenesten er aktiv, serverer %d lyd, %d video og %d bildefiler."
-
-msgid "The miniDLNA service is not running."
-msgstr "MiniDLNA tjenesten kjører ikke."
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-"Dette er en liste over filnavn for å se etter når du søker etter albumcover."
-
-msgid "Video"
-msgstr "Video"
-
-msgid "miniDLNA"
-msgstr "MiniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "MiniDLNA Status"
-
-msgid "miniSSDP socket:"
-msgstr "miniSSDP socket:"
diff --git a/po/no/mmc_over_gpio.po b/po/no/mmc_over_gpio.po
deleted file mode 100644
index ea9a533..0000000
--- a/po/no/mmc_over_gpio.po
+++ /dev/null
@@ -1,32 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "CLK_pin"
-msgstr "CLK_pin"
-
-msgid "CS_pin"
-msgstr "CS_pin"
-
-msgid "DI_pin"
-msgstr "DI_pin"
-
-msgid "DO_pin"
-msgstr "DO_pin"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "MMC/SD driver configuration"
-msgstr "MMC/SD Konfigurasjon"
-
-msgid "Mode"
-msgstr "Modus"
-
-msgid "Name"
-msgstr "Navn"
-
-msgid "Settings"
-msgstr "Innstillinger"
diff --git a/po/no/multiwan.po b/po/no/multiwan.po
deleted file mode 100644
index a6e8bc4..0000000
--- a/po/no/multiwan.po
+++ /dev/null
@@ -1,117 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Antall forsøk før WAN feilsikkerhet"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Antall forsøk før WAN gjenoppretting"
-
-msgid "Auto"
-msgstr "Auto"
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Konfigurer regler for å styre utgående trafikk gjennom spesifiserte WAN "
-"koblinger."
-
-msgid "DNS Server(s)"
-msgstr "DNS Server(e)"
-
-msgid "Default Route"
-msgstr "Standard rute"
-
-msgid "Destination Address"
-msgstr "Destinasjonsadresse"
-
-msgid "Disable"
-msgstr "Deaktiver"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr "Feilsikkerhet trafikk destinasjon"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "Health monitor ICMP vert(er)"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "Health monitor ICMP tidsavbrudd"
-
-msgid "Health Monitor Interval"
-msgstr "Health monitor intervall"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"Health monitor oppdager og korrigerer nettverks endringer og mislykkede "
-"tilkoblinger."
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr "Lastbalansering fordeling"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Lastbalansering (kompatibilitet)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Lastbalansering (ytelse)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Multi-WAN trafikk regler"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Multi-WAN tillater bruk av flere internett oppkoblinger for lastbalansering "
-"og feilsikkerhet."
-
-msgid "None"
-msgstr "Ingen"
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr "Porter"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr "Kildeadresse"
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr "WAN Grensesnitt"
-
-msgid "WAN Uplink"
-msgstr "WAN Opplinje"
-
-msgid "all"
-msgstr "alle"
diff --git a/po/no/ntpc.po b/po/no/ntpc.po
deleted file mode 100644
index 7b3fd0b..0000000
--- a/po/no/ntpc.po
+++ /dev/null
@@ -1,44 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Clock Adjustment"
-msgstr "Tidskorrigering"
-
-msgid "Count of time measurements"
-msgstr "Antall tidsmålinger"
-
-msgid "Current system time"
-msgstr "Nåværende system tid"
-
-msgid "General"
-msgstr "Generelt"
-
-msgid "Hostname"
-msgstr "Vertsnavn"
-
-msgid "Offset frequency"
-msgstr "Frekvens forskyvning"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "Synkroniserer systemets tid"
-
-msgid "Time Server"
-msgstr "Tids Server"
-
-msgid "Time Servers"
-msgstr "Tids Servere"
-
-msgid "Time Synchronisation"
-msgstr "Tidssynkronisering"
-
-msgid "Update interval (in seconds)"
-msgstr "Oppdateringsintervall (i sek)"
-
-msgid "empty = infinite"
-msgstr "tomt = uendelig"
diff --git a/po/no/olsr.po b/po/no/olsr.po
deleted file mode 100644
index 7c5e5bb..0000000
--- a/po/no/olsr.po
+++ /dev/null
@@ -1,576 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/no/openvpn.po b/po/no/openvpn.po
deleted file mode 100644
index bf02ef3..0000000
--- a/po/no/openvpn.po
+++ /dev/null
@@ -1,547 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/no/p2pblock.po b/po/no/p2pblock.po
deleted file mode 100644
index af9c25e..0000000
--- a/po/no/p2pblock.po
+++ /dev/null
@@ -1,36 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Block Time"
-msgstr "Blokkerings tid"
-
-msgid "Enable P2P-Block"
-msgstr "Aktiver P2P-Blokkering"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Lag7-Protokoller"
-
-msgid "P2P-Block"
-msgstr "P2P-Blokkering"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"P2P-blokkering er en mekanisme for å blokkere ulike peer-to-peer protokoller "
-"for klienter som ikke er hvitelistede."
-
-msgid "Portrange"
-msgstr "Portområde"
-
-msgid "Whitelisted IPs"
-msgstr "Hvitelistede IP'er"
-
-msgid "seconds"
-msgstr "sekunder"
diff --git a/po/no/p910nd.po b/po/no/p910nd.po
deleted file mode 100644
index 72adc4c..0000000
--- a/po/no/p910nd.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid ""
-msgstr ""
-"PO-Revision-Date: 2013-03-21 23:05+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language: no\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Bidirectional mode"
-msgstr "Toveis modus (bidirectional)"
-
-msgid "Device"
-msgstr "Enhet"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Du må først installere pakkene som gir støtte for USB (kmod-usb-printer) "
-"eller parallellport (kmod-lp) skriver."
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Settings"
-msgstr "Innstillinger"
-
-msgid "TCP listener port."
-msgstr "TCP lytte port."
-
-msgid "enable"
-msgstr "Aktiver"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Skriverserver"
-
-#~ msgid "port_help"
-#~ msgstr "p910nd lytter på port 910+N. (N=0 blir port 9100 for første skriver)"
diff --git a/po/no/pbx-voicemail.po b/po/no/pbx-voicemail.po
deleted file mode 100644
index be25f0b..0000000
--- a/po/no/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/no/pbx.po b/po/no/pbx.po
deleted file mode 100644
index de74ec9..0000000
--- a/po/no/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/no/polipo.po b/po/no/polipo.po
deleted file mode 100644
index 931228e..0000000
--- a/po/no/polipo.po
+++ /dev/null
@@ -1,202 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/no/qos.po b/po/no/qos.po
deleted file mode 100644
index f25db68..0000000
--- a/po/no/qos.po
+++ /dev/null
@@ -1,103 +0,0 @@
-msgid ""
-msgstr ""
-"PO-Revision-Date: 2013-03-21 23:04+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language: no\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "Beregn overhead"
-
-msgid "Classification Rules"
-msgstr "Klassifisering Regler"
-
-msgid "Classification group"
-msgstr "Klassifisering gruppe"
-
-msgid "Destination host"
-msgstr "Destinasjon vert"
-
-msgid "Downlink"
-msgstr "Nedlinje"
-
-msgid "Download speed (kbit/s)"
-msgstr "Nedlasting hastighet (kbit/s)"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Half-duplex"
-msgstr "Halv dupleks"
-
-msgid "Interfaces"
-msgstr "Grensesnitt"
-
-msgid "Internet Connection"
-msgstr "Internett Tilkobling"
-
-msgid "Number of bytes"
-msgstr "Antall bytes"
-
-msgid "Ports"
-msgstr "Porter"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "Quality of Service"
-
-msgid "Service"
-msgstr "Service"
-
-msgid "Source host"
-msgstr "Kilde vert"
-
-msgid "Target"
-msgstr "Mål"
-
-msgid "Uplink"
-msgstr "Opplinje"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Opplasting hastighet (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Med <abbr title=\"Quality of Service\">QoS</abbr> kan du prioritere "
-"nettverkstrafikk valgt av adresser, porter eller tjenester."
-
-msgid "all"
-msgstr "alle"
-
-msgid "allf"
-msgstr "alle"
-
-msgid "default"
-msgstr "standard"
-
-msgid "express"
-msgstr "ekspress"
-
-msgid "low"
-msgstr "lav"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "prioritet"
-
-msgid "qos_connbytes"
-msgstr "Bytes sendt"
-
-#~ msgid "Half-Duplex"
-#~ msgstr "Halvdupleks"
diff --git a/po/no/radvd.po b/po/no/radvd.po
deleted file mode 100644
index 1c43442..0000000
--- a/po/no/radvd.po
+++ /dev/null
@@ -1,435 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "6to4 interface"
-msgstr "6til4 grensesnitt"
-
-msgid "Address"
-msgstr "Adresse"
-
-msgid "Addresses"
-msgstr "Adresser"
-
-msgid "Advanced"
-msgstr "Avansert"
-
-msgid "Advertise Home Agent flag"
-msgstr "Annonser Home Agent flagg"
-
-msgid "Advertise router address"
-msgstr "Annonser ruteradressen"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Annonserte Domenesuffikser"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"Annonsert IPv6 RDNSS. Hvis tom, brukes den gjeldende IPv6-adressen til "
-"grensesnittet"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Annonserte IPv6 prefikser"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Annonserte IPv6 prefikser. Hvis tom, brukes gjeldende grensesnitt prefiks"
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "Annonserer Mobile IPv6 Home Agent muligheter (RFC3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr "Annonserer Mobile Router registration muligheter (NEMO Basic)"
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-"Annonserer antatt tilgjengelighet i millisekunder for naboer i RA. 0 "
-"deaktiverer annonsenering av tilgjengelighet"
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-"Annonserer standard Hop Count verdien for utgående unicast pakker i RA. 0 "
-"deaktierer annonsering av hopcount"
-
-msgid "Advertises the default router preference"
-msgstr "Annonserer standard ruter preferanse"
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr "Annonserer angitt link MTU i RA. 0 deaktiverer annonsereing av MTU"
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-"Annonserer levetiden for standard ruter i sekunder. 0 indikerer at noden "
-"ikke er standard ruter"
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-"Annonserer tiden i sekunder der ruteren tilbyr Mobile IPv6 Home Agent "
-"tjenester"
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-"Annonserer ventetiden i millisekunder mellom Neighbor Solicitation meldinger "
-"i RA. 0 deaktiverer omsendte annonseringer"
-
-msgid "Advertising"
-msgstr "Annonsering"
-
-msgid "Autonomous"
-msgstr "Selvstendig"
-
-msgid "Clients"
-msgstr "Klienter"
-
-msgid "Configuration flag"
-msgstr "Konfigurasjon flagg"
-
-msgid "Current hop limit"
-msgstr "Nåværende hop grense"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "DNSSL Konfigurasjon"
-
-msgid "Default lifetime"
-msgstr "Standard levetid"
-
-msgid "Default preference"
-msgstr "Standard prepreferanse"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Enable advertisements"
-msgstr "Aktiver annonsering"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "Aktiverer ruter annonsering og anmodning"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-"Aktiverer den ekstra 'stateful' administrerte autokonfigurasjon protokoll "
-"(RFC2462)"
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-"Aktiverer autokonfigurasjon for annen ikke adresse informasjon (RFC2462)"
-
-msgid "General"
-msgstr "Generell"
-
-msgid "Home Agent information"
-msgstr "Home Agen informasjon"
-
-msgid "Home Agent lifetime"
-msgstr "Home Agent levetid"
-
-msgid "Home Agent preference"
-msgstr "Home Agent preferanse"
-
-msgid "Include Home Agent Information in the RA"
-msgstr "Inkluder Home Agent informasjon i RA"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr "Inkluder Mobile IPv6 annonserings intervall alternativer til RA"
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr "Inkluder utgående grensesnitts link-layer adresse til RA"
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-"Indikerer at grensesnittets adresse er sendt istedet for nettverks "
-"prefikset, noe som er nødvendig for Mobile IPv6"
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-"Indikerer at underliggende link ikke er broadcast kapabel, dette forhindrer "
-"spontane annonsering"
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-"Indikerer at dette prefikset kan bli brukt for autonom adresse konfigurasjon "
-"(RFC4862)"
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-"Indikerer at dette prefikset kan bli brukt for on-link bestemmelse (RFC4861)"
-
-msgid "Interface"
-msgstr "Grensesnitt"
-
-msgid "Interface Configuration"
-msgstr "Grensesnitt Konfigurasjon"
-
-msgid "Interface required"
-msgstr "Grenesnitt er nødvendig"
-
-msgid "Interfaces"
-msgstr "Grensesnitt"
-
-msgid "Lifetime"
-msgstr "Levetid"
-
-msgid "Link MTU"
-msgstr "Link MTU"
-
-msgid "Managed flag"
-msgstr "Managed flagg"
-
-msgid "Max. interval"
-msgstr "Maks. intervall"
-
-msgid "Maximum advertisement interval"
-msgstr "Maksimum annonsering intervall"
-
-msgid "Minimum advertisement delay"
-msgstr "Minimum annonsering forsinkelse"
-
-msgid "Minimum advertisement interval"
-msgstr "Minimum annonsering intervall"
-
-msgid "Mobile IPv6"
-msgstr "Mobile IPv6"
-
-msgid "Mobile IPv6 interval option"
-msgstr "Mobile IPv6 intervall alternativer"
-
-msgid "Mobile IPv6 router registration"
-msgstr "Mobile IPv6 ruter registrering"
-
-msgid "Multicast"
-msgstr "Multicast"
-
-msgid "On-link"
-msgstr "On-link"
-
-msgid "On-link determination"
-msgstr "On-link bestemmelse"
-
-msgid "Preference"
-msgstr "Preferanse"
-
-msgid "Preferred lifetime"
-msgstr "Foretrukket levetid"
-
-msgid "Prefix"
-msgstr "Prefiks"
-
-msgid "Prefix Configuration"
-msgstr "Prefiks Konfigurasjon"
-
-msgid "Prefixes"
-msgstr "Prefikser"
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr "RDNSS Konfigurasjon"
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr "Radvd - DNSSL"
-
-msgid "Radvd - Interface %q"
-msgstr "Radvd - Grensesnitt %q"
-
-msgid "Radvd - Prefix"
-msgstr "Radvd - Prefiks"
-
-msgid "Radvd - RDNSS"
-msgstr "Radvd - RDNSS"
-
-msgid "Radvd - Route"
-msgstr "Radvd - Rute"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-"Radvd er en ruter annonserings tjeneste for IPv6. Den lytter etter ruter "
-"anmodninger og sender ruter annonsering som beskrevet i RFC 4861"
-
-msgid "Reachable time"
-msgstr "Tilgjengelighet tid"
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-"Begrens kommunikasjonen til klienter spesifisert her, la stå tomt for å "
-"bruke multicast"
-
-msgid "Retransmit timer"
-msgstr "Omsendelse tidsmåler"
-
-msgid "Route Configuration"
-msgstr "Rute Konfigurasjon"
-
-msgid "Routes"
-msgstr "Ruter"
-
-msgid "Source link-layer address"
-msgstr "Kilde link-lag adresse"
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-"Angir et logisk grensenittsnavn å hente 6til4 prefiks fra. Grensesnittets "
-"offentlige IPv4 adresse er kombinert med 2002::/3 og verdien av prefiks "
-"alternativet"
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr "Angir det logiske grensesnittsnavnet som denne seksjonen tilhører"
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr "Angir preferanse knyttet til standard ruteren"
-
-msgid "Suffix"
-msgstr "Suffiks"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Maksimal tillatt tid mellom sending av spontane multicast annonseringer fra "
-"grensesnittet, i sekunder"
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-"Minimum tillatt tid mellom sending av multicast annonseringer fra "
-"grensesnittet, i sekunder"
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Minimum tillatt tid mellom sending av spontane multicast annonseringer fra "
-"grensesnittet, i sekunder"
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr "Referansen til Home Agenten som sender denne RA"
-
-msgid "Timing"
-msgstr "Timing"
-
-msgid "Unicast only"
-msgstr "Kun Unikast"
-
-msgid "Valid lifetime"
-msgstr "Gyldig levetid"
-
-msgid "Validity time"
-msgstr "Gyldighetsperiode"
-
-msgid "default"
-msgstr "standard"
-
-msgid "high"
-msgstr "høy"
-
-msgid "low"
-msgstr "lav"
-
-msgid "medium"
-msgstr "medium"
-
-msgid "no"
-msgstr "nei"
-
-msgid "yes"
-msgstr "ja"
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that addresses generated from "
-#~ "the prefix via stateless address autoconfiguration remain preferred. Use "
-#~ "0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Annonserer tiden i sekunder hvor adresser generert ut fra prefikset via "
-#~ "tilstandsløs autokonfigurasjon er foretrukket. Bruk 0 for ubegrenset "
-#~ "levetid"
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that the prefix is valid for the "
-#~ "purpose of on-link determination. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Annonserer tiden i sekunder hvor prefikset er gyldig, hvor formålet er on-"
-#~ "link fastsettelse. Bruk 0 for ubegrenset levetid."
-
-#~ msgid ""
-#~ "Specifies the lifetime associated with the route in seconds. Use 0 to "
-#~ "specify an infinite lifetime"
-#~ msgstr ""
-#~ "Angir levetiden tilknyttet ruten i sekunder. Bruk 0 for ubegrenset levetid"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the DNSSL entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Angir den maksimale varighet av DNSSL navne oppslag. Bruk 0 for "
-#~ "ubegrenset levetid"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the RDNSS entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Angir den maksimale varighet av RDNSS navne oppslag. Bruk 0 for "
-#~ "ubegrenset levetid"
diff --git a/po/no/rrdtool.po b/po/no/rrdtool.po
deleted file mode 100644
index d336ec3..0000000
--- a/po/no/rrdtool.po
+++ /dev/null
@@ -1,354 +0,0 @@
-msgid ""
-msgstr ""
-"PO-Revision-Date: 2013-03-25 14:24+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language: no\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Trådløs - Signal Støy Forhold"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Støy Nivå"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Signal Styrke"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Trådløs - Signal Kvalitet"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Signal Kvalitet"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: ICMP Rundtur Antall"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Brannmur - Pakker Behandlet"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "Pakker/Sek"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Lenke \\\"%di\\\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - Overført på %pi"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "Bytes/Sek"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Bytes (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - Pakker på %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "Pakker/Sek"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Behandlet (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Droppet (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Feil (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - Multicast på %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "Pakker/Sek"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Pakker"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - Kollisjoner på %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "Kollisjoner/Sek"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Kollisjoner"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - Feil på %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "Feil/Sek"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Prosesser"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Prosesser/Sek"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Prosesser %pi - brukt cpu tid"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffier"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "system"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "bruker"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Prosess %pi - tråder og prosesser"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "Telle"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Prosess %pi - sidefeil"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Sidefeil"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "side feil"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Prosess %pi - virtuelt minne størrelse"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bytes"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "virtuelt minne"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Bruk av prosessor #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Overført på %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "Bytes/Sek"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Pakker på %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "Pakker/Sek"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: TCP-tilkoblinger på port %pi"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "Tilkoblinger/Sek"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Disk forbruk på %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Bytes"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: Avbrudd"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "Problemer/Sek"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: System Belastning"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Belastning"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 min"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 min"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 min"
diff --git a/po/no/samba.po b/po/no/samba.po
deleted file mode 100644
index 1c5c807..0000000
--- a/po/no/samba.po
+++ /dev/null
@@ -1,72 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow guests"
-msgstr "Tillat gjester"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr "Tillat systembrukere å nå sine hjemmekataloger via nettverks mapper."
-
-msgid "Allowed users"
-msgstr "Tillatte brukere"
-
-msgid "Create mask"
-msgstr "Opprett Maske"
-
-msgid "Description"
-msgstr "Beskrivelse"
-
-msgid "Directory mask"
-msgstr "Katalog maske"
-
-msgid "Edit Template"
-msgstr "Rediger Mal"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Rediger malen som brukes til å generere samba konfigurasjonen."
-
-msgid "General Settings"
-msgstr "Generelle Innstillinger"
-
-msgid "Hostname"
-msgstr "Vertsnavn"
-
-msgid "Mask for new directories"
-msgstr "Maske for nye kataloger"
-
-msgid "Mask for new files"
-msgstr "Maske for nye filer"
-
-msgid "Name"
-msgstr "Navn"
-
-msgid "Network Shares"
-msgstr "Nettverks Mapper"
-
-msgid "Path"
-msgstr "Fysisk bane"
-
-msgid "Read-only"
-msgstr "Skrivebeskyttet"
-
-msgid "Share home-directories"
-msgstr "Del Hjemmekataloger"
-
-msgid "Shared Directories"
-msgstr "Delte Kataloger"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Dette er innholdet av filen '/etc/samba/smb.conf.template' som din samba "
-"konfigurasjon vil bli generert fra. Verdier omsluttet av ('|') bør ikke "
-"endres. De får sine verdier fra 'Generelle Innstillinger' fanen."
-
-msgid "Workgroup"
-msgstr "Arbeidsgruppe"
diff --git a/po/no/splash.po b/po/no/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/no/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/no/statistics.po b/po/no/statistics.po
deleted file mode 100644
index a4706b7..0000000
--- a/po/no/statistics.po
+++ /dev/null
@@ -1,678 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Action (target)"
-msgstr "Handling (mål)"
-
-msgid "Add command for reading values"
-msgstr "Legg til kommando for lesing av verdier"
-
-msgid "Add matching rule"
-msgstr "Legg til matchende regel"
-
-msgid "Add multiple hosts separated by space."
-msgstr "Legg til flere verter adskilt med mellomrom."
-
-msgid "Add notification command"
-msgstr "Legg til varsling kommando"
-
-msgid "Base Directory"
-msgstr "Hoved Katalog"
-
-msgid "Basic monitoring"
-msgstr "Enkel overvåking"
-
-msgid "CPU Plugin Configuration"
-msgstr "CPU plugin konfigurasjon"
-
-msgid "CSV Output"
-msgstr "CSV Utdata"
-
-msgid "CSV Plugin Configuration"
-msgstr "CSV plugin konfigurasjon"
-
-msgid "Cache collected data for"
-msgstr "Hurtigbufre innsamlede data for"
-
-msgid "Cache flush interval"
-msgstr "Intervall for tømming av hurtigbuffer"
-
-msgid "Chain"
-msgstr "Lenke"
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Collectd Innstillinger"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd er en liten daemon for innsamling av data fra ulike kilder gjennom "
-"ulike plugins. På denne siden kan du endre generelle innstillinger for "
-"collectd daemon."
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr "DF plugin konfigurasjon"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "DNS plugin konfigurasjon"
-
-msgid "Data collection interval"
-msgstr "Datainnsamling intervall"
-
-msgid "Datasets definition file"
-msgstr "Datasett definisjonsfil"
-
-msgid "Destination ip range"
-msgstr "Destinasjon ip område"
-
-msgid "Directory for collectd plugins"
-msgstr "Katalog for collectd plugins"
-
-msgid "Directory for sub-configurations"
-msgstr "Katalog for sub-konfigurasjoner"
-
-msgid "Disk Plugin Configuration"
-msgstr "Disk plugin konfigurasjon"
-
-msgid "Disk Space Usage"
-msgstr "Disk Forbruk"
-
-msgid "Disk Usage"
-msgstr "Disk Anvendelse"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Vis tidsperiode »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "E-Post plugin konfigurasjon"
-
-msgid "Email"
-msgstr "Epost"
-
-msgid "Enable this plugin"
-msgstr "Aktiver denne plugin"
-
-msgid "Exec"
-msgstr "Program"
-
-msgid "Exec Plugin Configuration"
-msgstr "Program plugin konfigurasjon"
-
-msgid "Filter class monitoring"
-msgstr "Filter class overvåking"
-
-msgid "Firewall"
-msgstr "Brannmur"
-
-msgid "Flush cache after"
-msgstr "Tømme hurtigbufferen etter"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "Videresending mellom lyttende og server adresser"
-
-msgid "Graphs"
-msgstr "Grafer"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Her kan du definere eksterne kommandoer som blir startet av collectd for å "
-"lese enkelte verdier. Verdiene skal leses fra stdout."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Her kan du definere eksterne kommandoer som blir startet av collectd når "
-"visse grenseverdier er blitt nådd. Verdiene som fører til aktivering vil bli "
-"overført til det påkallede programs stdin."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr "Her kan du definere kriterier for reglene som overvåker iptables."
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Vertsnavn"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr "IRQ plugin konfigurasjon"
-
-msgid "Ignore source addresses"
-msgstr "Ignorer kilde adresser"
-
-msgid "Incoming interface"
-msgstr "Innkommende grensesnitt"
-
-msgid "Interface Plugin Configuration"
-msgstr "Grensesnitt plugin konfigurasjon"
-
-msgid "Interfaces"
-msgstr "Grensesnitt"
-
-msgid "Interrupts"
-msgstr "Avbrudd"
-
-msgid "Interval for pings"
-msgstr "Intervall ping"
-
-msgid "Iptables Plugin Configuration"
-msgstr "Iptable plugin konfigurasjon"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr "Lyttende vert"
-
-msgid "Listen port"
-msgstr "Lyttende port"
-
-msgid "Listener interfaces"
-msgstr "Lyttende grensesnitt"
-
-msgid "Load Plugin Configuration"
-msgstr "Belastning plugin konfigurasjon"
-
-msgid "Maximum allowed connections"
-msgstr "Maksimum tillatte tilkoblinger"
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr "Overvåk alle lokale lyttende porter"
-
-msgid "Monitor devices"
-msgstr "Overvåk enheter"
-
-msgid "Monitor disks and partitions"
-msgstr "Overvåk disker og partisjoner"
-
-msgid "Monitor filesystem types"
-msgstr "Overvåk filsystem typer"
-
-msgid "Monitor hosts"
-msgstr "Overvåk verter"
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr "Overvåk avbrudd"
-
-msgid "Monitor local ports"
-msgstr "Overvåk lokale porter"
-
-msgid "Monitor mount points"
-msgstr "Overvåk monterings punkter"
-
-msgid "Monitor processes"
-msgstr "Overvåk prosesser"
-
-msgid "Monitor remote ports"
-msgstr "Overvåk eksterne porter"
-
-msgid "Name of the rule"
-msgstr "Navnet på regelen"
-
-msgid "Netlink"
-msgstr "Nettlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Netlink plugin konfigurasjon"
-
-msgid "Network"
-msgstr "Nettverk"
-
-msgid "Network Plugin Configuration"
-msgstr "Nettverks plugin konfigurasjon"
-
-msgid "Network plugins"
-msgstr "Nettverks plugin"
-
-msgid "Network protocol"
-msgstr "Nettverks protokoll"
-
-msgid "Number of threads for data collection"
-msgstr "Antall tråder for datainnsamling"
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr "Lag kun gjennomsnittlige RRAs"
-
-msgid "Options"
-msgstr "Alternativer"
-
-msgid "Outgoing interface"
-msgstr "Utgående grensesnitt"
-
-msgid "Output plugins"
-msgstr "Utdata Plugin"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Ping plugin konfigurasjon"
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Prosesser"
-
-msgid "Processes Plugin Configuration"
-msgstr "Prosess plugin konfigurasjon"
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Prosessor"
-
-msgid "Qdisc monitoring"
-msgstr "Qdisc overvåking"
-
-msgid "RRD XFiles Factor"
-msgstr "RRD XFiles Faktor"
-
-msgid "RRD heart beat interval"
-msgstr "RRD \"heartbeat\" intervall"
-
-msgid "RRD step interval"
-msgstr "RRD steg intervall"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "RRDTool plugin konfigursjon"
-
-msgid "Rows per RRA"
-msgstr "Rader per RRA"
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Sekunder"
-
-msgid "Server host"
-msgstr "Server vert"
-
-msgid "Server port"
-msgstr "Server port"
-
-msgid "Shaping class monitoring"
-msgstr "Shaping class overvåking"
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr "Kilde ip område"
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr "Statistikk"
-
-msgid "Storage directory"
-msgstr "Lagrings katalog"
-
-msgid "Storage directory for the csv files"
-msgstr "Katalog for lagring av CSV filer"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Lagre dataverdier som rater i stedet for absolutte verdier"
-
-msgid "Stored timespans"
-msgstr "Lagrede tidsperioder"
-
-msgid "System Load"
-msgstr "System Belastning"
-
-msgid "System plugins"
-msgstr "System plugins"
-
-msgid "TCP Connections"
-msgstr "TCP Forbindelser"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "TCPConns plugin konfigurasjon"
-
-msgid "TTL for network packets"
-msgstr "TTL for nettverkspakker"
-
-msgid "TTL for ping packets"
-msgstr "TTL for ping pakker"
-
-msgid "Table"
-msgstr "Tabell"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr "CPU plugin samler grunnleggende statistikk om prosessor bruk."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"CSV plugin lagrer de innsamlede dataene i CSV format for videre bearbeiding "
-"av eksterne programmer."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"DF plugin samler statistikk om disker på forskjellige enheter, monterings "
-"punkter eller filsystem typer."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"Disk plugin samler detaljert brukerstatistikk for utvalgte partisjoner og "
-"hele disker."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"DNS pluging samler detaljert statistikk om DNS relatert trafikk på utvalgte "
-"grensesnitt."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"E-Post plugin skaper en unix socket som kan brukes til å sende e-post "
-"statistikk til en kjørende collectd daemon. Denne plugin er primært ment å "
-"bli brukt i forbindelse med Mail::SpamAssasin::Plugin::Collectd men kan også "
-"brukes på andre måter."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"Program plugin starter eksterne kommandoer for å lese verdier fra de, eller "
-"for å varsle eksterne prosesser når visse grenseverdier er blitt nådd."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr "Grensesnitt plugin samler trafikk statistikk på utvalgte grensesnitt."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"Iptables plugin vil overvåke utvalgte brannmurregler og samle informasjon om "
-"bearbeidet data per regel."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"IRQ plugin vil overvåke hastigheten på forespørsler per sekund for hver "
-"valgte avbrudd. Hvis ingen avbrudd er valgt vil alle avbrudd bli overvåket."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "Belastning plugin samler statistikk systemets belastning."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"Netlink plugin samler utvidet informasjon som qdisc-, klasse- og filter-"
-"statistikk for utvalgte grensesnitt."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"Nettverk plugin gir nettverk basert kommunikasjon mellom ulike collectd "
-"forekomster. Collectd kan operere i både klient og server modus. I "
-"klientmodus blir lokalt innsamlede data overført til en collectd server. I "
-"server modus mottar enheten data fra andre klienter."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"Ping plugin sender icmp echo svar til utvalgte verter og måle tiden en "
-"rundtur tar for hver vert."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"Prosess plugin samler informasjon som f.eks. CPU tid, sidefeil og minnebruk "
-"for utvalgte prosesser."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"RRDTool plugin lagrer innsamlede data i rrd databasefiler som er grunnlaget "
-"for diagrammene.<br /><br /><strong>Advarsel: Innsetting av feile verdier "
-"vil kunne resultere i et svært høyt minneforbruk i den midlertidige "
-"katalogen (temp). Dette kan gjøre enheten ubrukelig!</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"Statistikk pakken er basert på <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> og bruker <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> for å tegne diagram bilder fra innsamlede data."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"Tcpconns plugin samler informasjon om åpne TCP tilkoblinger på utvalgte "
-"porter."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"Unixsock plugin skaper en unix socket som kan brukes til å lese innsamlet "
-"data fra collectd prosess."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Denne seksjonen definerer hvilke grensesnitt collectd vil lytte på for "
-"innkommende tilkoblinger."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Denne seksjonen definerer hvilke servere de lokalt innsamlede data blir "
-"sendt til."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Prøv å søk etter fullstendig vertsnavn"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Unixsock plugin konfigurasjon"
-
-msgid "Used PID file"
-msgstr "Brukt PID fil"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr "Detaljert overvåking"
-
-msgid "Wireless"
-msgstr "Trådløs"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr "f.eks. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "f.eks. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "f.eks. forkast med tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "maks. 16 tegn"
-
-msgid "reduces rrd size"
-msgstr "reduserer RRD størrelse"
-
-msgid "seconds; multiple separated by space"
-msgstr "sekunder; flere adskilt med mellomrom"
-
-msgid "server interfaces"
-msgstr "Server grensesnitt"
-
-#~ msgid "Installed network plugins:"
-#~ msgstr "Installerte nettverks plugin:"
-
-#~ msgid "Installed output plugins:"
-#~ msgstr "Installerte utdata plugin:"
-
-#~ msgid ""
-#~ "Network plugins are used to collect information about open tcp "
-#~ "connections, interface traffic, iptables rules etc."
-#~ msgstr ""
-#~ "Nettverks plugin er brukt til å samle inn informasjon om åpne tcp koblinger, "
-#~ "trafikk over grensesnitt, iptables regler osv."
-
-#~ msgid ""
-#~ "Output plugins provide different possibilities to store collected data. "
-#~ "It is possible to enable multiple plugin at one, for example to store "
-#~ "collected data in rrd databases and to transmit the data over the network "
-#~ "to other collectd instances."
-#~ msgstr ""
-#~ "Utdata plugins gir ulike muligheter til å lagre innsamlede data. Det er "
-#~ "mulig å aktivere flere pluginer på en, for eksempel for å lagre innsamlede "
-#~ "data i RRD databaser og å overføre data over nettverket til andre collectd "
-#~ "forekomster."
-
-#~ msgid ""
-#~ "System plugins collecting values about system state and ressource usage "
-#~ "on the device.:"
-#~ msgstr "System plugins samler verdier om systemets tilstand og ressurs-bruk.:"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "Trådløs plugin samler statistikk om trådløs signalstyrke, støy og kvalitet."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Trådløs plugin konfigurasjon"
diff --git a/po/no/tinyproxy.po b/po/no/tinyproxy.po
deleted file mode 100644
index 5c4dddd..0000000
--- a/po/no/tinyproxy.po
+++ /dev/null
@@ -1,255 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/no/transmission.po b/po/no/transmission.po
deleted file mode 100644
index e9717c9..0000000
--- a/po/no/transmission.po
+++ /dev/null
@@ -1,295 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-03-25 21:10+0200\n"
-"PO-Revision-Date: 2013-03-25 21:13+0200\n"
-"Last-Translator: protx <lars.hardy@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: no\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Alternative download speed"
-msgstr "Alternativ nedlastingshastighet"
-
-msgid "Alternative speed enabled"
-msgstr "Alternativ hastighet aktivert"
-
-msgid "Alternative speed time begin"
-msgstr "Alternativ hastighet start tid"
-
-msgid "Alternative speed time day"
-msgstr "Alternativ hastighet tid på dagen"
-
-msgid "Alternative speed time end"
-msgstr "Alternativ hastighet tid når ferdig"
-
-msgid "Alternative speed timing enabled"
-msgstr "Alternativ hastighet tidspunkt aktivert"
-
-msgid "Alternative upload speed"
-msgstr "Alternativ opplastingshastighet"
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/no/upnp.po b/po/no/upnp.po
deleted file mode 100644
index 09a30b8..0000000
--- a/po/no/upnp.po
+++ /dev/null
@@ -1,146 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"ACL angir hvilke eksterne porter som kan bli viderekoblet, og til hvilke "
-"interne adresser og porter."
-
-msgid "Action"
-msgstr "Handling"
-
-msgid "Active UPnP Redirects"
-msgstr "Aktive UPnP Viderekoblinger"
-
-msgid "Advanced Settings"
-msgstr "Avanserte Innstillinger"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "Tillat videkobling kun til IP adresser som ber om det"
-
-msgid "Announced model number"
-msgstr "Annonsert modellnummer"
-
-msgid "Announced serial number"
-msgstr "Annonsert serienummer"
-
-msgid "Clean rules interval"
-msgstr "Nullstill UPnP Viderekoblinger intervall"
-
-msgid "Clean rules threshold"
-msgstr "Nullstill UPnP terskel"
-
-msgid "Client Address"
-msgstr "Klient adresse"
-
-msgid "Client Port"
-msgstr "Klient port"
-
-msgid "Collecting data..."
-msgstr "Henter data..."
-
-msgid "Comment"
-msgstr "Kommentar"
-
-msgid "Delete Redirect"
-msgstr "Fjern Viderekobling"
-
-msgid "Device UUID"
-msgstr "Enhet UUID"
-
-msgid "Downlink"
-msgstr "Nedlinje"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Aktiver NAT-PMP funksjonalitet"
-
-msgid "Enable UPnP functionality"
-msgstr "Aktiver UPnP funksjonalitet"
-
-msgid "Enable additional logging"
-msgstr "Aktiver tilleggs logging"
-
-msgid "Enable secure mode"
-msgstr "Aktiver sikker modus"
-
-msgid "External Port"
-msgstr "Ekstern port"
-
-msgid "External ports"
-msgstr "Eksterne porter"
-
-msgid "General Settings"
-msgstr "Generelle Innstillinger"
-
-msgid "Internal addresses"
-msgstr "Interne adresser"
-
-msgid "Internal ports"
-msgstr "Interne porter"
-
-msgid "MiniUPnP ACLs"
-msgstr "MiniUPnP ACL'er"
-
-msgid "MiniUPnP settings"
-msgstr "MiniUPnP Innstillinger"
-
-msgid "Notify interval"
-msgstr "Informasjons intervall"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Presentation URL"
-msgstr "Presentasjon URL"
-
-msgid "Protocol"
-msgstr "Protokoll"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Setter ekstra debugging informasjon i systemloggen"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Rapporter systemets oppetid istedenfor daemon oppetid"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Start UPnP og NAT-PMP tjenesten"
-
-msgid "There are no active redirects."
-msgstr "Det finnes ingen aktive viderekoblinger"
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP gjør at klientene i det lokale nettverket automatisk kan konfigurere "
-"ruteren."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP gjør at klientene i det lokale nettverket automatisk kan konfigurere "
-"ruteren."
-
-msgid "UPnP lease file"
-msgstr "UPnP leie fil"
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Opplinje"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Verdi i KByte/sek, kun for informasjon"
-
-msgid "enable"
-msgstr "Aktiver"
diff --git a/po/no/ushare.po b/po/no/ushare.po
deleted file mode 100644
index 321d29e..0000000
--- a/po/no/ushare.po
+++ /dev/null
@@ -1,44 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Content directories"
-msgstr "Innholdskataloger"
-
-msgid "Disable telnet console"
-msgstr "Deaktiver telnet konsoll"
-
-msgid "Disable webinterface"
-msgstr "Deaktiver webgrensesnitt"
-
-msgid "Enable"
-msgstr "Aktiver"
-
-msgid "Interface"
-msgstr "Grensesnitt"
-
-msgid "Options"
-msgstr "Alternativer"
-
-msgid "Servername"
-msgstr "Servernavn"
-
-msgid "Settings"
-msgstr "Innstillinger"
-
-msgid "Username"
-msgstr "Brukernavn"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-
-#~ msgid "ushare_desc"
-#~ msgstr "UPnP A/V og DLNA Media Server for Linux."
diff --git a/po/no/uvc_streamer.po b/po/no/uvc_streamer.po
deleted file mode 100644
index fc111f0..0000000
--- a/po/no/uvc_streamer.po
+++ /dev/null
@@ -1,38 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/no/vnstat.po b/po/no/vnstat.po
deleted file mode 100644
index c1e94d2..0000000
--- a/po/no/vnstat.po
+++ /dev/null
@@ -1,58 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configuration"
-msgstr "Konfigurasjon"
-
-msgid "Daily traffic"
-msgstr "Trafikk hver dag"
-
-msgid "Graphs"
-msgstr "Grafer"
-
-msgid "Hourly traffic"
-msgstr "Trafikk hver time"
-
-msgid "Monitor selected interfaces"
-msgstr "Overvåk valgte grensesnitt"
-
-msgid "Monthly traffic"
-msgstr "Trafikk hver måned"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Ingen database har blitt satt opp ennå. Gå til VnStat konfigurasjonen og "
-"aktiver overvåking for ett eller flere grensesnitt."
-
-msgid "Restart VnStat"
-msgstr "Omstart VnStat"
-
-msgid "Summary display"
-msgstr "Visning av sammendrag"
-
-msgid "Top 10 display"
-msgstr "Top 10 visning"
-
-msgid "Update »"
-msgstr "Oppdater »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "VnStat Grafer"
-
-msgid "VnStat Traffic Monitor"
-msgstr "VnStat Trafikk Monitor"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat er en nettverks trafikk monitor for Linux som loggfører "
-"nettverks trafikk for de valgte grensesnitt."
diff --git a/po/no/voice_core.po b/po/no/voice_core.po
deleted file mode 100644
index a0149da..0000000
--- a/po/no/voice_core.po
+++ /dev/null
@@ -1,14 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Phones"
-msgstr "Telefoner"
-
-msgid "Voice"
-msgstr "Voice"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "Admin Telefoner"
diff --git a/po/no/voice_diag.po b/po/no/voice_diag.po
deleted file mode 100644
index de7aaf2..0000000
--- a/po/no/voice_diag.po
+++ /dev/null
@@ -1,25 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Diagnostics"
-msgstr "Diagnostikk"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Diagnostikk tilgjengelig på denne enheten avhenger av hvilken moduler som er "
-"installert."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Under denne meny finner du instillinger som gjør det mulig å konfigurere og "
-"utføre 'Voice' operasjoner på systemet ditt. Dette er kjent som diagnostikk."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "Administrasjon Diagnostikk"
diff --git a/po/no/watchcat.po b/po/no/watchcat.po
deleted file mode 100644
index ceafe5d..0000000
--- a/po/no/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/no/wol.po b/po/no/wol.po
deleted file mode 100644
index bddbdce..0000000
--- a/po/no/wol.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Last-Translator: Lars Hardy <lars.hardy@gmail.com>\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Send på alle grensesnitt"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-"Velg hvilken vert som skal startes opp, eller angi en MAC adresse som "
-"skal brukes"
-
-msgid "Host to wake up"
-msgstr "Vert som skal startes opp"
-
-msgid "Network interface to use"
-msgstr "Nettverksgrensesnitt"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Noen ganger virker bare ett av disse verktøyene. Hvis ett av de ikke "
-"lykkes med å starte opp verten kan du prøve det andre."
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Angir grensesnittet som WoL pakken blir sendt ut på"
-
-msgid "Starting WoL utility:"
-msgstr "Starter WoL:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LAN er en mekanisme for å starte opp datamaskiner i det lokale nettverket."
-
-msgid "Wake up host"
-msgstr "Start vert"
-
-msgid "WoL program"
-msgstr "WoL programm"
diff --git a/po/no/wshaper.po b/po/no/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/no/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/pl/ahcp.po b/po/pl/ahcp.po
deleted file mode 100644
index 5345c7b..0000000
--- a/po/pl/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-14 16:40+0200\n"
-"Last-Translator: Tomecki <przykryweczka@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "Serwer AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP to protokół automatycznej konfiguracji sieci IPv6 i IPv6/IPv4 "
-"przeznaczone do stosowania zamiast DHCP w sieciach, w których jest trudne "
-"lub wręcz niemożliwe, aby skonfigurować serwer w każdej warstwie łącza "
-"domeny rozgłoszeniowej, na przykład w mobilnych sieciach ad-hoc."
-
-msgid "Active AHCP Leases"
-msgstr "Aktywne dzierżawy AHCP"
-
-msgid "Address"
-msgstr "Adres"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-msgid "Age"
-msgstr "Wiek"
-
-msgid "Announced DNS servers"
-msgstr "Rozgłaszane serwery DNS"
-
-msgid "Announced NTP servers"
-msgstr "Rozgłaszane serwery NTP"
-
-msgid "Announced prefixes"
-msgstr "Rozgłaszane prefiksy"
-
-msgid "Collecting data..."
-msgstr "Zbieranie informacji..."
-
-msgid "Forwarder"
-msgstr "Przekierowanie"
-
-msgid "General Setup"
-msgstr "Ustawienia podstawowe"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 oraz IPv6"
-
-msgid "IPv4 only"
-msgstr "Tylko IPv4"
-
-msgid "IPv6 only"
-msgstr "Tylko IPv6"
-
-msgid "Lease directory"
-msgstr "Katalog dzierżaw"
-
-msgid "Lease validity time"
-msgstr "Czas dzierżawy"
-
-msgid "Log file"
-msgstr "Plik dziennika"
-
-msgid "Multicast address"
-msgstr "Adres Multicast"
-
-msgid "Operation mode"
-msgstr "Tryb pracy"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Rodzina protokołów"
-
-msgid "Served interfaces"
-msgstr "Udostępniane interfejsy"
-
-msgid "Server"
-msgstr "Serwer"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Określa rozgłaszane adresy IPv4/6 serwerów NTP"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Określa rozgłaszane adresy IPv4/6 serwerów nazw"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Określa rozgłaszane prefiksy sieciowe w notacji CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr "Usługa AHCP nie jest uruchomiona."
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "Usługa AHCP jest uruchomiona z ID %s."
-
-msgid "There are no active leases."
-msgstr "Nie ma aktywnych dzierżaw."
-
-msgid "Unique ID file"
-msgstr "Unikalny plik ID"
diff --git a/po/pl/asterisk.po b/po/pl/asterisk.po
deleted file mode 100644
index f092853..0000000
--- a/po/pl/asterisk.po
+++ /dev/null
@@ -1,75 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-18 01:39+0200\n"
-"Last-Translator: Michał <msjablonsky@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Ustawienia Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Katalog AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Buforuj nagrane pliki podczas nagrywania"
-
-#~ msgid "Debug Level"
-#~ msgstr "Poziom debugowania"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Wyłącz niektóre ostrzeżenia"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Wykonaj zrzut pamięci podczas awarii"
-
-#~ msgid "High Priority"
-#~ msgstr "Wysoki Priorytet"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Uruchom Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Użyj wbudowanego próbkowania"
-
-#~ msgid "Log directory"
-#~ msgstr "Katalog logów"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Max. dozwolona ilość połączeń"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Max. obciążenie powodujące odrzucanie nowych połączeń"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Wyłącz kolory konsoli"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Katalog tymczasowy dla plików dźwiękowych"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Grupa dla uruchamiania"
-
-#~ msgid "The User to run as"
-#~ msgstr "Użytkownik dla uruchamiania"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Katalog bufora poczty głosowej"
-
-#~ msgid "Time Zone"
-#~ msgstr "Strefa Czasowa"
-
-#~ msgid "localzone"
-#~ msgstr "localzone"
-
-#~ msgid "parkedmusicclass"
-#~ msgstr "parkedmusicclass"
diff --git a/po/pl/base.po b/po/pl/base.po
deleted file mode 100644
index fae550c..0000000
--- a/po/pl/base.po
+++ /dev/null
@@ -1,3010 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-20 09:40+0200\n"
-"PO-Revision-Date: 2013-03-09 17:57+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: Polish\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(okno %d minut, interwał %d sekund)"
-
-msgid "(%s available)"
-msgstr "(dostępne %s)"
-
-msgid "(empty)"
-msgstr "(pusty)"
-
-msgid "(no interfaces attached)"
-msgstr "(brak podłączonych interfejsów)"
-
-msgid "-- Additional Field --"
-msgstr "-- Dodatkowe pole --"
-
-msgid "-- Please choose --"
-msgstr "-- Proszę wybrać --"
-
-msgid "-- custom --"
-msgstr "-- inne --"
-
-msgid "1 Minute Load:"
-msgstr "Obciążenie w ciągu 1 minuty:"
-
-msgid "15 Minute Load:"
-msgstr "Obciążenie w ciągu 15 minut:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz drugi kanał powyżej"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz drugi kanał poniżej"
-
-msgid "5 Minute Load:"
-msgstr "Obciążenie w ciągu 5 minut:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "Port wywołania <abbr title=\"Domain Name System\">DNS</abbr> "
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "Port serwera <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"Nazwa <abbr title=\"Domain Name System\">DNS</abbr> będzie rozwijana przez "
-"kolejne serwery w porządku podanym w resolvfile"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Adres <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "Brama <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "Maska sieci <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"Adres sieci (CIDR) <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "Brama <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Konfiguracja diod <abbr title=\"Light Emitting Diode\">LED</abbr> "
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Nazwa diody <abbr title=\"Light Emitting Diode\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Adres <abbr title=\"Media Access Control\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"Maksymalna ilość\">Maks.</abbr> dzierżaw <abbr title=\"Dynamic "
-"Host Configuration Protocol\">DHCP</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"Maksymalny\">Maks.</abbr> rozmiar pakietu <abbr title="
-"\"Extension Mechanisms for Domain Name System\">EDNS0</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"Maksymalna ilość\">Maks.</abbr> zapytań równoczesnych"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Par: %s / Grup: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "APN"
-
-# Wydaje mi się że brakuje litery R...
-msgid "AR Support"
-msgstr "Wsparcie dla ARP"
-
-msgid "ARP retry threshold"
-msgstr "Próg powtórzeń ARP"
-
-msgid "ATM Bridges"
-msgstr "Mostki ATM"
-
-# Nie wiem czy to powinno się tłumaczyć wg. mnie lepiej zostawić po angielsku
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "Identyfikator kanału wirtualnego ATM (VCI)"
-
-# j.w.
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "Identyfikator ścieżki wirtualnej ATM (VPI)"
-
-# Jak zwykle zakręciłem...niech ktoś poprawi
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"Mostki ATM maskują za-kapsułkowane ramki Ethernet w połączeniach AAL5 jako "
-"wirtualne interfejsy w Linuksie. Interfejsy takie mogą być użyte w "
-"połączeniu z protokołami DHCP lub PPP do wdzwaniania się do sieci provider`a"
-
-msgid "ATM device number"
-msgstr "Numer urządzenia ATM"
-
-msgid "Accept router advertisements"
-msgstr "Akceptuj rozgłoszenia routera"
-
-# co to takiego?
-msgid "Access Concentrator"
-msgstr "Koncentrator dostępowy ATM"
-
-msgid "Access Point"
-msgstr "Punkt dostępowy"
-
-msgid "Action"
-msgstr "Akcja"
-
-msgid "Actions"
-msgstr "Akcje"
-
-msgid "Activate this network"
-msgstr "Aktywuj tą sieć"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Aktywne trasy routingu <abbr title=\"Internet Protocol Version 4\">IPv4</"
-"abbr>"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Aktywne trasy routingu <abbr title=\"Internet Protocol Version 6\">IPv6</"
-"abbr>"
-
-msgid "Active Connections"
-msgstr "Aktywne połączenia"
-
-msgid "Active DHCP Leases"
-msgstr "Aktywne dzierżawy DHCP"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Aktywne dzierżawy DHCPv6"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Dodaj"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Dodaj lokalny sufiks domeny do nazw urządzeń z pliku hosts"
-
-msgid "Add new interface..."
-msgstr "Dodaj nowy interfejs..."
-
-msgid "Additional Hosts files"
-msgstr "Dodatkowe pliki Hosts"
-
-msgid "Address"
-msgstr "Adres"
-
-# Na upartego można by zrobić Adres dostępowy mostu przekaźnikowego - ale kto to zrozumie?
-msgid "Address to access local relay bridge"
-msgstr "Adres dostępowy do \"relay bridge\""
-
-msgid "Administration"
-msgstr "Zarządzanie"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-# Dosłowne tłumaczenie
-msgid "Advertise IPv6 on network"
-msgstr "Rozgłoś protokół IPv6 w sieci"
-
-msgid "Advertised network ID"
-msgstr "Rozgłoś identyfikator sieci (network ID)"
-
-msgid "Alert"
-msgstr "Alarm"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "Pozwól na logowanie <abbr title=\"Secure Shell\">SSH</abbr>"
-
-msgid "Allow all except listed"
-msgstr "Pozwól wszystkim oprócz wyszczególnionych"
-
-msgid "Allow listed only"
-msgstr "Pozwól tylko wyszczególnionym"
-
-msgid "Allow localhost"
-msgstr "Pozwól tylko sobie (localhost)"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Pozwól zdalnym komputerom na połączenia SSH do lokalnych przekierowanych "
-"portów"
-
-msgid "Allow root logins with password"
-msgstr "Zezwól na logowanie root`a przy pomocy hasła"
-
-# Brak spacji...
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Pozwól użytkownikowi <em>root</em> na logowanie przy pomocy hasła"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Pozwól na ruch wychodzący (odpowiedzi) z podsieci 127.0.0.0/8, np. usługi RBL"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Dopuszczony zakres: 1 do 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-"Zawsze używaj kanał 40MHz nawet jeśli drugi kanał pokrywa się. Użycie tej "
-"opcji nie jest zgodne ze standardem IEEE 802.11n-2009!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-"Zostanie utworzona dodatkowa sieć jeśli zostawisz tą opcję niezaznaczoną."
-
-msgid "Antenna 1"
-msgstr "Antena 1"
-
-msgid "Antenna 2"
-msgstr "Antena 2"
-
-msgid "Antenna Configuration"
-msgstr "Ustawienia anteny"
-
-msgid "Any zone"
-msgstr "Jakakolwiek strefa"
-
-msgid "Apply"
-msgstr "Zatwierdź"
-
-msgid "Applying changes"
-msgstr "Wprowadzam zmiany"
-
-msgid "Assign interfaces..."
-msgstr "Przypisuję interfejsy..."
-
-msgid "Associated Stations"
-msgstr "Powiązane stacje"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Bezprzewodowy kontroler Atheros 802.11%s"
-
-msgid "Authentication"
-msgstr "Uwierzytelnianie"
-
-# Nawet M$ tego nie tłumaczy;)
-msgid "Authoritative"
-msgstr "Autorytatywny"
-
-msgid "Authorization Required"
-msgstr "Wymagana autoryzacja"
-
-msgid "Auto Refresh"
-msgstr "Automatyczne odświeżanie"
-
-msgid "Available"
-msgstr "Dostępne"
-
-msgid "Available packages"
-msgstr "Dostępne pakiety"
-
-msgid "Average:"
-msgstr "Średnia:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Wróć"
-
-msgid "Back to Overview"
-msgstr "Powrót do Przeglądu"
-
-msgid "Back to configuration"
-msgstr "Powrót do konfiguracji"
-
-msgid "Back to overview"
-msgstr "Powrót do Przeglądu"
-
-msgid "Back to scan results"
-msgstr "Powrót do wyników skanowania"
-
-msgid "Background Scan"
-msgstr "Skanowanie w tle"
-
-msgid "Backup / Flash Firmware"
-msgstr "Kopia zapasowa / Aktualizacja Firmware`u"
-
-# NIe ma powodu skracać tekstu, zmieści się w polu.
-msgid "Backup / Restore"
-msgstr "Kopia zapasowa/Przywróć"
-
-msgid "Backup file list"
-msgstr "Kopia zapas. listy plików"
-
-msgid "Bad address specified!"
-msgstr "Wprowadzono zły adres"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Poniżej widoczna jest lista plików przeznaczonych do kopii zapasowej. "
-"Zawiera ona zmienione pliki konfiguracyjne oznaczone przez opkg, podstawowe "
-"pliki systemowe, oraz pliki oznaczone do kopiowania przez użytkownika."
-
-msgid "Bitrate"
-msgstr "Przepływność"
-
-msgid "Bogus NX Domain Override"
-msgstr "Podrób statystyki NXDOMAIN"
-
-msgid "Bridge"
-msgstr "Most"
-
-msgid "Bridge interfaces"
-msgstr "Interfejs mostu"
-
-msgid "Bridge unit number"
-msgstr "Numer Mostu (urządzenia)"
-
-# Podejrzewam że chodzi o interfejs? mam rację?
-msgid "Bring up on boot"
-msgstr "Podnieś przy stracie"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Bezprzewodowy kontroler Broadcom 802.11%s"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Bezprzewodowy kontroler Broadcom BCM%04x 802.11"
-
-msgid "Buffered"
-msgstr "Buforowany"
-
-msgid "Buttons"
-msgstr "Przyciski"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "Użycie CPU (%)"
-
-# Niech ktoś zaproponuje coś lepszego
-msgid "Cached"
-msgstr "Zcache`owany"
-
-msgid "Cancel"
-msgstr "Anuluj"
-
-msgid "Chain"
-msgstr "Łańcuch"
-
-msgid "Changes"
-msgstr "Zmiany"
-
-msgid "Changes applied."
-msgstr "Zmiany zostały zastosowane."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Zmienia hasło administratora dostępu do urządzenia"
-
-msgid "Channel"
-msgstr "Kanał"
-
-msgid "Check"
-msgstr "Sprawdź"
-
-msgid "Checksum"
-msgstr "Suma kontrolna"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Wybierz strefę firewalla którą chcesz przypisać do tego interfejsu. Wybierz "
-"<em>unspecified</em> aby usunąć interfejs z przypisanej strefy lub wybierz "
-"pole <em>create</em> aby zdefiniować nową strefę i przypisać ją do "
-"interfejsu."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Wybierz sieć/sieci które chcesz przyłączyć do tego interfejsu "
-"bezprzewodowego lub wypełnij pole <em>utwórz</em> aby utworzyć nową sieć."
-
-# Może razem z angielskim słowem...
-msgid "Cipher"
-msgstr "Szyfr (Cipher)"
-
-# Przyciski nazywają sie "Twórz archiwum" i "Wykonaj reset" a nie Przywróć Ustawienia
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Wciśnij \"Twórz archiwum\" aby pobrać archiwum tar zawierające bieżące pliki "
-"konfiguracyjne. Aby przywrócić ustawienia domyślne wciśnij \"Wykonaj reset"
-"\" (możliwe tylko w przypadku obrazu squashfs)."
-
-msgid "Client"
-msgstr "Klient"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "Nazwa (ID) klienta do wysłania podczas negocjacji DHCP"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Zamykaj nieaktywne połączenia po określonym czasie podanym w sekundach, "
-"wpisz 0 aby uzyskać stałe połączenie."
-
-msgid "Close list..."
-msgstr "Zamknij listę..."
-
-msgid "Collecting data..."
-msgstr "Zbieranie danych..."
-
-msgid "Command"
-msgstr "Polecenie"
-
-msgid "Common Configuration"
-msgstr "Konfiguracja podstawowa"
-
-msgid "Compression"
-msgstr "Kompresja"
-
-msgid "Configuration"
-msgstr "Konfiguracja"
-
-msgid "Configuration applied."
-msgstr "Konfiguracja została zastosowana."
-
-msgid "Configuration files will be kept."
-msgstr "Pliki konfiguracyjne zostaną zachowane."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "Konfiguruje ten zasób jako zasób overlay dla block-extroot"
-
-msgid "Confirmation"
-msgstr "Potwierdzenie"
-
-msgid "Connect"
-msgstr "Połącz"
-
-msgid "Connected"
-msgstr "Połączony"
-
-msgid "Connection Limit"
-msgstr "Limit połączeń"
-
-msgid "Connections"
-msgstr "Połączenia"
-
-msgid "Country"
-msgstr "Kraj"
-
-msgid "Country Code"
-msgstr "Kod kraju"
-
-# Pokrywa następujące interfejsy
-msgid "Cover the following interface"
-msgstr "Pokrywa następujący interfejs"
-
-msgid "Cover the following interfaces"
-msgstr "Pokrywa następujące interfejsy"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Utwórz / Przypisz strefę firewalla"
-
-msgid "Create Interface"
-msgstr "Utwórz interfejs"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Utwórz most pomiędzy wieloma interfejsami"
-
-msgid "Critical"
-msgstr "Krytyczne"
-
-msgid "Cron Log Level"
-msgstr "Poziom logowania Cron`a"
-
-msgid "Custom Interface"
-msgstr "Interfejs Niestandardowy"
-
-# Spacji zabrało i napisy się skleiły
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Dostosuj zachowanie diod <abbr title=\"Light Emitting Diode\">LED</abbr> "
-"urządzenia jeśli jest to możliwe."
-
-msgid "DHCP Leases"
-msgstr "Dzierżawy DHCP"
-
-msgid "DHCP Server"
-msgstr "Serwer DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP i DNS"
-
-msgid "DHCP client"
-msgstr "Klient DHCP"
-
-msgid "DHCP-Options"
-msgstr "Opcje DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "Dzierżawy DHCPv6"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Przekierowania DNS"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Debug"
-
-msgid "Default %d"
-msgstr "Domyślne %d"
-
-msgid "Default gateway"
-msgstr "Brama domyślna"
-
-msgid "Default state"
-msgstr "Stan domyślny"
-
-msgid "Define a name for this network."
-msgstr "Określ nazwę dla tej sieci."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Zdefiniuj dodatkowe opcje DHCP, np. \"<code>6,192.168.2.1,192.168.2.2</code>"
-"\" rozgłasza domyślne serwery DNS klientom DHCP."
-
-msgid "Delete"
-msgstr "Usuń"
-
-msgid "Delete this interface"
-msgstr "Usuń ten interfejs"
-
-msgid "Delete this network"
-msgstr "Usuń tą sieć"
-
-msgid "Description"
-msgstr "Opis"
-
-# Ktoś tłumaczył bez zobaczenia tego w gui. Dotyczy zmiany motywu ten opis.
-msgid "Design"
-msgstr "Motyw"
-
-msgid "Destination"
-msgstr "Przeznaczenie"
-
-msgid "Device"
-msgstr "Urządzenie"
-
-msgid "Device Configuration"
-msgstr "Konfiguracja urządzenia"
-
-msgid "Diagnostics"
-msgstr "Diagnostyka"
-
-msgid "Directory"
-msgstr "Katalog"
-
-msgid "Disable"
-msgstr "Wyłącz"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Wyłącz <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> na "
-"tym interfejsie."
-
-msgid "Disable DNS setup"
-msgstr "Wyłącz konfigurowanie DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Wyłącz zegar HW-Beacon"
-
-msgid "Disabled"
-msgstr "Wyłączony"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Odrzuć wychodzące odpowiedzi RFC1918"
-
-msgid "Displaying only packages containing"
-msgstr "Pokazuję tylko paczki zawierające"
-
-msgid "Distance Optimization"
-msgstr "Optymalizacja odległości"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Odległość do najdalej oddalonego członka sieci w metrach."
-
-# Jak poprzednio trzymam się konwencji
-msgid "Diversity"
-msgstr "Wielorakość"
-
-# Nie wiem czy nie zamotałem ja rozumiem;)
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq jest to serwer <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> połączony z serwerem <abbr title=\"Domain Name "
-"System\">DNS</abbr>. Jest to serwer przekazujący (Fowarder) dla firewalli "
-"<abbr title=\"Network Address Translation\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "Nie cache`uj odpowiedzi negatywnych, np. nie dla bieżących domen"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Nie przekazuj zapytań które nie mogą być zrealizowane przez publiczne "
-"serwery nazw"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Nie przekazuj odwrotnych lookup`ów do sieci lokalnych"
-
-msgid "Do not send probe responses"
-msgstr "Nie wysyłaj ramek probe response"
-
-msgid "Domain required"
-msgstr "Wymagana domena"
-
-msgid "Domain whitelist"
-msgstr "Whitelist domen (Dozwolone domeny)"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Nie przekazuj zapytań <abbr title=\"Domain Name System\">DNS</abbr> bez "
-"nazwy <abbr title=\"Domain Name System\">DNS</abbr>'a"
-
-msgid "Download and install package"
-msgstr "Pobierz i zainstaluj pakiet"
-
-msgid "Download backup"
-msgstr "Pobierz kopię zapasową"
-
-msgid "Dropbear Instance"
-msgstr "Usługa Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear oferuje zdalny dostęp do konsoli (shell`a) poprzez swojego klienta "
-"<abbr title=\"Secure Shell\">SSH</abbr> oraz serwer <abbr title=\"Secure Copy"
-"\">SCP</abbr>"
-
-# "n"  brakowało...
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> dynamiczne"
-
-msgid "Dynamic tunnel"
-msgstr "Tunel dynamiczny"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Dynamicznie rezerwuje adresy DHCP dla klientów. Jeśli jest wyłączone tylko "
-"klienci posiadający stałe dzierżawy będą obsłużeni."
-
-msgid "EAP-Method"
-msgstr "Metoda EAP"
-
-msgid "Edit"
-msgstr "Edycja"
-
-msgid "Edit this interface"
-msgstr "Edytuj ten interfejs"
-
-msgid "Edit this network"
-msgstr "Edytuj tą sieć"
-
-# dosłownie nagły wypadek
-msgid "Emergency"
-msgstr "Zagrożenie"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Włącz <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Włącz dynamiczną aktualizację punktu końcowego sieci HE.net"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Włącz negocjację IPv6 na łączu PPP"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Włącz przechodzenie ramek Jumbo"
-
-msgid "Enable NTP client"
-msgstr "Włącz klienta NTP"
-
-msgid "Enable TFTP server"
-msgstr "Włącz serwer TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "Włącz funkcjonalność VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Włącz uczenie się i starzenie"
-
-msgid "Enable this mount"
-msgstr "Włącz ten punkt montowania"
-
-msgid "Enable this swap"
-msgstr "Włącz ten swap"
-
-msgid "Enable/Disable"
-msgstr "Wlącz/Wyłącz"
-
-msgid "Enabled"
-msgstr "Włączony"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Włącz protokół STP na tym moście "
-
-# a może sposób kapsułkowania byłby lepszy?
-msgid "Encapsulation mode"
-msgstr "Sposób Enkapsulacji"
-
-msgid "Encryption"
-msgstr "Szyfrowanie"
-
-msgid "Erasing..."
-msgstr "Usuwanie..."
-
-msgid "Error"
-msgstr "Błąd"
-
-msgid "Ethernet Adapter"
-msgstr "Karta Ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Switch Ethernet"
-
-msgid "Expand hosts"
-msgstr "Rozwiń hosty"
-
-msgid "Expires"
-msgstr "Wygasa"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Czas wygasania dzierżawy adresu, minimum to 2 Minuty (<code>2m</code>)."
-
-msgid "External system log server"
-msgstr "Zewnętrzny serwer dla loga systemowego"
-
-msgid "External system log server port"
-msgstr "Port zewnętrznego serwera dla loga systemowego"
-
-msgid "Fast Frames"
-msgstr "Szybkie ramki (Fast Frames)"
-
-msgid "File"
-msgstr "Plik"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Rozgłoszono nazwę pliku obrazu startowego do klientów"
-
-msgid "Filesystem"
-msgstr "System plików"
-
-msgid "Filter"
-msgstr "Filtr"
-
-msgid "Filter private"
-msgstr "Filtruj prywatne"
-
-msgid "Filter useless"
-msgstr "Filtruj bezużyteczne"
-
-msgid "Find and join network"
-msgstr "Znajdź i podłącz się do sieci"
-
-msgid "Find package"
-msgstr "Znajdź pakiet"
-
-msgid "Finish"
-msgstr "Zakończ"
-
-msgid "Firewall"
-msgstr "Firewall - zapora ogniowa"
-
-# Nie ma potrzeby pisania z dużej litery
-msgid "Firewall Settings"
-msgstr "Ustawienia firewalla"
-
-msgid "Firewall Status"
-msgstr "Stan firewalla"
-
-msgid "Firmware Version"
-msgstr "Wersja firmware"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Stały port źródłowy dla wychodzących zapytań DNS"
-
-msgid "Flags"
-msgstr "Flagi"
-
-msgid "Flash Firmware"
-msgstr "Aktualizuj Firmware"
-
-msgid "Flash image..."
-msgstr "Aktualizacja obrazu..."
-
-msgid "Flash new firmware image"
-msgstr "Aktualizuj nowym obrazem firmware`u."
-
-msgid "Flash operations"
-msgstr "Operacje aktualizacji"
-
-msgid "Flashing..."
-msgstr "Aktualizuję !!!"
-
-msgid "Force"
-msgstr "Wymuś"
-
-msgid "Force 40MHz mode"
-msgstr "Wymuś tryb 40MHz"
-
-msgid "Force CCMP (AES)"
-msgstr "Wymuś CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-"Wymuś uruchomienie serwera DHCP w tej sieci nawet gdy wykryto inny serwer."
-
-msgid "Force TKIP"
-msgstr "Wymuś TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Wymuś TKIP i CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Przekazuj ruch DHCP"
-
-msgid "Forward broadcast traffic"
-msgstr "Przekazuj broadcast`y"
-
-msgid "Forwarding mode"
-msgstr "Tryb przekazywania"
-
-msgid "Fragmentation Threshold"
-msgstr "Próg Fragmentacji"
-
-msgid "Frame Bursting"
-msgstr "Dzielenie ramek"
-
-msgid "Free"
-msgstr "Wolne"
-
-msgid "Free space"
-msgstr "Wolna przestrzeń"
-
-msgid "Frequency Hopping"
-msgstr "Skakanie po częstotliwościach"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "Tylko GPRS"
-
-msgid "Gateway"
-msgstr "Brama"
-
-msgid "Gateway ports"
-msgstr "Porty bramy"
-
-msgid "General Settings"
-msgstr "Ustawienia główne"
-
-msgid "General Setup"
-msgstr "Ustawienia podstawowe"
-
-msgid "Generate archive"
-msgstr "Twórz archiwum"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Ogólny bezprzewodowy kontroler 802.11%s"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-"Hasło nie zostało zmienione, wpisane poprzednie hasło routera jest "
-"niewłaściwe!"
-
-msgid "Go to password configuration..."
-msgstr "Idź do konfiguracji hasła..."
-
-msgid "Go to relevant configuration page"
-msgstr "Idź do istotnych stron konfiguracyjnych"
-
-msgid "HE.net password"
-msgstr "Hasło HE.net"
-
-msgid "HE.net user ID"
-msgstr "Login (ID) HE.net"
-
-msgid "HT capabilities"
-msgstr "Możliwości HT"
-
-msgid "HT mode"
-msgstr "Tryb HT"
-
-msgid "Handler"
-msgstr "Uchwyt"
-
-msgid "Hang Up"
-msgstr "Rozłącz"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Tutaj możesz skonfigurować podstawowe ustawienia twojego urządzenia, np. "
-"nazwę hosta, strefę czasową."
-
-# nie ma słowa "autentykacji". Uwierzytelnianie!
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Tutaj wklej swoje klucze publiczne SSH (po jednym w linii), dla "
-"uwierzytelniania SSH"
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Kontroler bezprzewodowy Hermes 802.11b"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"Ukryj <abbr title=\"Extended Service Set Identifier (Nazwę sieci)\">ESSID</"
-"abbr>"
-
-msgid "Host entries"
-msgstr "Wpisy PC"
-
-msgid "Host expiry timeout"
-msgstr "Czas wygasania hosta"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "<abbr title=\"Internet Protocol Address\">IP</abbr> lub sieć Hosta"
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Nazwa hosta do wysłania podczas negocjacji DHCP"
-
-msgid "Hostnames"
-msgstr "Nazwy hostów"
-
-msgid "IP address"
-msgstr "Adres IP"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "Firewall IPv4"
-
-msgid "IPv4 WAN Status"
-msgstr "Status IPv4 WAN"
-
-msgid "IPv4 address"
-msgstr "Adres IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 oraz IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "Broadcast IPv4"
-
-msgid "IPv4 gateway"
-msgstr "Brama IPv4"
-
-msgid "IPv4 netmask"
-msgstr "Maska IPv4"
-
-msgid "IPv4 only"
-msgstr "Tylko IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "Długość prefiksu IPv4"
-
-msgid "IPv4-Address"
-msgstr "Adres IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "Firewall IPv6"
-
-msgid "IPv6 WAN Status"
-msgstr "Status WAN IPv6"
-
-msgid "IPv6 address"
-msgstr "Adres IPv6"
-
-msgid "IPv6 gateway"
-msgstr "Brama IPv6"
-
-msgid "IPv6 only"
-msgstr "Tylko IPv6"
-
-msgid "IPv6 prefix"
-msgstr "Prefiks IPv6"
-
-msgid "IPv6 prefix length"
-msgstr "Długość prefiksu IPv6"
-
-msgid "IPv6-Address"
-msgstr "Adres IPv6"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-w-IPv4 (RFC4213)"
-
-# 6rd to nie "szóste", tylko IPv6 rapid deployment
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-przez-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-przez-IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "Tożsamość"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Jeśli podano, zainstaluj urządzenie poprzez jego UUID zamiast <abbr title="
-"\"fixed device node\">ustalonego węzła urządzenia</abbr>"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Jeśli podano, zainstaluj urządzenie poprzez nazwę partycji zamiast <abbr "
-"title=\"fixed device node\">ustalonego węzła urządzenia</abbr>"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Jeśli odznaczone, nie ma zdefiniowanej domyślnej ścieżki routingu"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr "Jeśli odznaczone, rozgłoszane adresy serwerów DNS są ignorowane"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Jeśli ilość twojej pamięci fizycznej jest niewystarczająca, nieużywane "
-"miejsce na dysku może być tymczasowo wykorzystane na urządzenie pliku "
-"wymiany. W rezultacie większa ilość pamięci <abbr title=\"Random Access "
-"Memory\">RAM</abbr> będzie dostępna. Uwaga - plik wymiany jest dużo "
-"wolniejszy niż pamięć <abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Ignoruj pliki Hosts"
-
-msgid "Ignore interface"
-msgstr "Ignoruj interfejs"
-
-msgid "Ignore resolve file"
-msgstr "Ignoruj pliki resolve"
-
-msgid "Image"
-msgstr "Obraz"
-
-msgid "In"
-msgstr "W"
-
-msgid "Inactivity timeout"
-msgstr "Czas bezczynności"
-
-msgid "Inbound:"
-msgstr "Przychodzący:"
-
-msgid "Info"
-msgstr "Info"
-
-msgid "Initscript"
-msgstr "Skrypt startowy"
-
-msgid "Initscripts"
-msgstr "Skrypty startowe"
-
-msgid "Install"
-msgstr "Instaluj"
-
-msgid "Install package %q"
-msgstr "Instaluj pakiet %q"
-
-msgid "Install protocol extensions..."
-msgstr "Instaluj rozszerzenia protokołów..."
-
-msgid "Installed packages"
-msgstr "Zainstalowane pakiety"
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid "Interface Configuration"
-msgstr "Konfiguracja Interfejsu"
-
-# Tam jest lista interfejsów....
-msgid "Interface Overview"
-msgstr "Przegląd Interfejsów"
-
-msgid "Interface is reconnecting..."
-msgstr "Ponowne łączenie interfejsu..."
-
-msgid "Interface is shutting down..."
-msgstr "Interfejs jest wyłączany..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Interfejs nie istnieje lub nie jest jeszcze podłączony."
-
-msgid "Interface reconnected"
-msgstr "Połączono ponownie interfejs"
-
-msgid "Interface shut down"
-msgstr "Wyłączono interfejs"
-
-msgid "Interfaces"
-msgstr "Interfejsy"
-
-# Nadużycie tagu abbr uważam za uzasadnione.
-msgid "Internal Server Error"
-msgstr "Wewnętrzny błąd serwera"
-
-msgid "Invalid"
-msgstr "Niewłaściwy"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "Podano niewłaściwy ID VLAN`u! Dozwolone są tylko ID pomiędzy %d a %d."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "Podano niewłaściwy ID VLAN`u! Dozwolone są tylko unikalne ID."
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Niewłaściwy login i/lub hasło! Spróbuj ponownie."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Wygląda na to, że próbujesz wgrać obraz większy niż twoja pamięć flash, "
-"proszę sprawdź czy to właściwy obraz!"
-
-msgid "Java Script required!"
-msgstr "Java Script jest wymagany!"
-
-msgid "Join Network"
-msgstr "Połącz z siecią"
-
-msgid "Join Network: Settings"
-msgstr "Przyłącz do sieci: Ustawienia"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Przyłącz do sieci: Skanuj sieci WiFi"
-
-msgid "Keep settings"
-msgstr "Zachowaj ustawienia"
-
-msgid "Kernel Log"
-msgstr "Log kernela"
-
-msgid "Kernel Version"
-msgstr "Wersja kernela"
-
-msgid "Key"
-msgstr "Klucz"
-
-msgid "Key #%d"
-msgstr "Klucz #%d"
-
-msgid "Kill"
-msgstr "Zabij"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "Serwer L2TP"
-
-msgid "LCP echo failure threshold"
-msgstr "Próg błędu echa LCP"
-
-msgid "LCP echo interval"
-msgstr "Częstotliwość echa LCP"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Oznaczenie"
-
-msgid "Language"
-msgstr "Język"
-
-msgid "Language and Style"
-msgstr "Styl i język"
-
-msgid "Lease validity time"
-msgstr "Czas ważności dzierżawy"
-
-msgid "Leasefile"
-msgstr "Plik dzierżaw"
-
-msgid "Leasetime"
-msgstr "Czas dzierżawy"
-
-msgid "Leasetime remaining"
-msgstr "Pozostały czas dzierżawy"
-
-msgid "Leave empty to autodetect"
-msgstr "Pozostaw niewypełnione dla autodetekcji"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Pozostaw niewypełnione aby użyć bieżącego adresu WAN"
-
-msgid "Legend:"
-msgstr "Legenda:"
-
-msgid "Limit"
-msgstr "Limit"
-
-msgid "Link On"
-msgstr "Połączenie aktywne"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Lista serwerów <abbr title=\"Domain Name System\">DNS</abbr> do których będą "
-"przekazywane zapytania"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Lista domen zezwalających na odpowiedzi RFC1918"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "Lista hostów które dostarczają zafałszowane wyniki NX domain"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-"Słuchaj tylko na podanym interfejsie, lub jeśli nie podano na wszystkich"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Port nasłuchu dla przychodzących zapytań DNS"
-
-msgid "Load"
-msgstr "Obciążenie"
-
-msgid "Load Average"
-msgstr "Średnie obciążenie"
-
-msgid "Loading"
-msgstr "Ładowanie"
-
-msgid "Local IPv4 address"
-msgstr "Lokalny adres IPv4"
-
-msgid "Local IPv6 address"
-msgstr "Lokalny adres IPv6"
-
-msgid "Local Startup"
-msgstr "Lokalny autostart"
-
-msgid "Local Time"
-msgstr "Czas lokalny"
-
-msgid "Local domain"
-msgstr "Domena lokalna"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Specyfikacja domeny lokalnej. Nazwy należące do tej domeny nie są "
-"przekazywane dalej ani rozwijane przez DHCP lub tylko pliki hosts"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Przyrostek (suffiks) domeny przyłączany do nazw DHCP i wpisów w pliku hosts"
-
-msgid "Local server"
-msgstr "Serwer lokalny"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Zlokalizuj nazwę hosta w zależności od odpytującej podsieci jeśli jest "
-"dostępne więcej niż jedno IP"
-
-msgid "Localise queries"
-msgstr "Zapytania lokalizujące"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Zablokowano dla kanału %d używanego przez %s"
-
-msgid "Log output level"
-msgstr "Poziom logowania"
-
-msgid "Log queries"
-msgstr "Loguj zapytania"
-
-msgid "Logging"
-msgstr "Logowanie"
-
-msgid "Login"
-msgstr "Zaloguj"
-
-msgid "Logout"
-msgstr "Wyloguj"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "Najniższy wydzierżawiony adres jako offset dla adresu sieci."
-
-msgid "MAC-Address"
-msgstr "Adres MAC"
-
-msgid "MAC-Address Filter"
-msgstr "Filtr adresów MAC"
-
-msgid "MAC-Filter"
-msgstr "Filtr adresów MAC"
-
-msgid "MAC-List"
-msgstr "Lista MAC"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Maksymalna Szybkość"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Maksymalna dozwolona liczba aktywnych dzierżaw DHCP"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Maksymalna dozwolona liczba jednoczesnych zapytań DNS"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Maksymalny dozwolony rozmiar pakietu EDNS.0 UDP"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Maksymalny czas podany w sekundach do pełnej gotowości modemu"
-
-msgid "Maximum hold time"
-msgstr "Maksymalny czas podtrzymania"
-
-msgid "Maximum number of leased addresses."
-msgstr "Maksymalna liczba dzierżawionych adresów."
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "Pamięć"
-
-msgid "Memory usage (%)"
-msgstr "Użycie pamięci (%)"
-
-msgid "Metric"
-msgstr "Metryka"
-
-msgid "Minimum Rate"
-msgstr "Minimalna Szybkość"
-
-msgid "Minimum hold time"
-msgstr "Minimalny czas podtrzymania"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Brakujące rozszerzenie protokołu dla protokołu %q"
-
-msgid "Mode"
-msgstr "Tryb"
-
-msgid "Modem device"
-msgstr "Modem"
-
-msgid "Modem init timeout"
-msgstr "Limit czasu inicjacji modemu"
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr "Wpis montowania"
-
-msgid "Mount Point"
-msgstr "Punkt montowania"
-
-msgid "Mount Points"
-msgstr "Punkty montowania"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Punkty montowania - Wpis montownia"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Punkty montowania - Wpis Swap"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Punkty montowania definiują gdzie urządzenie pamięci zostanie podłączone do "
-"systemu plików"
-
-msgid "Mount options"
-msgstr "Opcje montowania"
-
-msgid "Mount point"
-msgstr "Punkt montownia"
-
-msgid "Mounted file systems"
-msgstr "Zamontowane systemy plików"
-
-msgid "Move down"
-msgstr "Przesuń w dół"
-
-msgid "Move up"
-msgstr "Przesuń w górę"
-
-msgid "Multicast Rate"
-msgstr "Szybkość Multicast`u"
-
-msgid "Multicast address"
-msgstr "Adres Multicast`u"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "Lista serwerów NTP"
-
-msgid "Name"
-msgstr "Nazwa"
-
-msgid "Name of the new interface"
-msgstr "Nazwa nowego interfejsu"
-
-msgid "Name of the new network"
-msgstr "Nazwa nowej sieci"
-
-msgid "Navigation"
-msgstr "Nawigacja"
-
-msgid "Netmask"
-msgstr "Maska sieci"
-
-msgid "Network"
-msgstr "Sieć"
-
-msgid "Network Utilities"
-msgstr "Narzędzia sieciowe"
-
-msgid "Network boot image"
-msgstr "Sieciowy obraz startowy"
-
-msgid "Network without interfaces."
-msgstr "Sieć bez interfejsów"
-
-msgid "Next »"
-msgstr "Następna »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Brak skonfigurowanego serwera DHCP dla tego interfejsu"
-
-msgid "No chains in this table"
-msgstr "Brak łańcuchów w tej tablicy"
-
-msgid "No files found"
-msgstr "Nie znaleziono plików"
-
-msgid "No information available"
-msgstr "Brak dostępnych informacji"
-
-msgid "No negative cache"
-msgstr "Brak odwrotnego cache`a"
-
-msgid "No network configured on this device"
-msgstr "Brak skonfigurowanych sieci na tym urządzeniu"
-
-msgid "No network name specified"
-msgstr "Nie określono nazwy sieci"
-
-msgid "No package lists available"
-msgstr "Brak dostępu do listy pakietów"
-
-msgid "No password set!"
-msgstr "NIE USTAWIONO HASŁA!!!"
-
-msgid "No rules in this chain"
-msgstr "Brak zasad w tym łańcuchu"
-
-msgid "No zone assigned"
-msgstr "Brak przypisanej strefy"
-
-msgid "Noise"
-msgstr "Szum"
-
-msgid "Noise:"
-msgstr "Szum:"
-
-msgid "None"
-msgstr "Brak"
-
-msgid "Normal"
-msgstr "Normalny"
-
-msgid "Not Found"
-msgstr "Nie znaleziono"
-
-msgid "Not associated"
-msgstr "Nie powiązany"
-
-msgid "Not connected"
-msgstr "Nie podłączony"
-
-msgid "Note: Configuration files will be erased."
-msgstr "UWAGA: Pliki konfiguracyjne zostaną usunięte."
-
-msgid "Notice"
-msgstr "Spostrzeżenie"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Konfiguracja OPKG"
-
-msgid "Off-State Delay"
-msgstr "Zwłoka wyłączenia"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Na tej stronie można skonfigurować interfejsy urządzenia. Możesz zmostkować "
-"kilka interfejsów zaznaczając pole \"mostkuj interfejsy\", a następnie "
-"wpisując ich nazwy oddzielone spacjami. Można także użyć notacji <abbr title="
-"\"Virtual Local Area Network\">VLAN`ów</abbr> <samp>INTERFACE.VLANNR</samp> "
-"(<abbr title=\"na przykład\">np.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Zwłoka włączenia"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr "Nazwa hosta lub adres MAC musu być podany!"
-
-msgid "One or more fields contain invalid values!"
-msgstr "Jedno lub więcej pól zawiera nieprawidłowe wartości!"
-
-msgid "One or more required fields have no value!"
-msgstr "Jedno lub więcej pól nie posiada wpisanych wartości!"
-
-msgid "Open list..."
-msgstr "Otwórz listę..."
-
-msgid "Option changed"
-msgstr "Wartość zmieniona"
-
-msgid "Option removed"
-msgstr "Usunięto wartość"
-
-msgid "Options"
-msgstr "Opcje"
-
-msgid "Other:"
-msgstr "Inne:"
-
-msgid "Out"
-msgstr "Wychodzące"
-
-msgid "Outbound:"
-msgstr "Wychodzące:"
-
-msgid "Outdoor Channels"
-msgstr "Kanały zewnętrzne"
-
-msgid "Override MAC address"
-msgstr "Nadpisz adres MAC"
-
-msgid "Override MTU"
-msgstr "Nadpisz MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Nadpisz adres bramy w odpowiedziach DHCP"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Nadpisz maskę sieci wysyłaną do klientów. Zazwyczaj jest ona wyliczana z "
-"podsieci która jest rozsyłana."
-
-msgid "Override the table used for internal routes"
-msgstr "Nadpisz tablicę routingu używaną dla wewnętrznych tras routowania"
-
-msgid "Overview"
-msgstr "Przegląd"
-
-msgid "Owner"
-msgstr "Właściciel"
-
-msgid "PAP/CHAP password"
-msgstr "Hasło PAP/CHAP"
-
-msgid "PAP/CHAP username"
-msgstr "Nazwa użytkownika PAP/CHAP"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "Enkapsulacja PPPoA"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "Wymagany pakiet libiwinfo!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Lista pakietów jest starsza niż 24 godziny"
-
-msgid "Package name"
-msgstr "Nazwa pakietu"
-
-msgid "Packets"
-msgstr "Pakiety"
-
-msgid "Part of zone %q"
-msgstr "Część strefy %q"
-
-msgid "Password"
-msgstr "Hasło"
-
-msgid "Password authentication"
-msgstr "Identyfikacja hasłem"
-
-msgid "Password of Private Key"
-msgstr "Hasło lub klucz prywatny"
-
-msgid "Password successfully changed!"
-msgstr "Pomyślnie zmieniono hasło!"
-
-msgid "Path to CA-Certificate"
-msgstr "Ścieżka do certyfikatu CA"
-
-msgid "Path to Client-Certificate"
-msgstr "Ścieżka do certyfikatu Klienta"
-
-msgid "Path to Private Key"
-msgstr "Ścieżka do Klucza Prywatnego"
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-"Ścieżka do pliku wykonywalnego, który obsługuje zdarzenie dla danego "
-"przycisku"
-
-msgid "Peak:"
-msgstr "Szczyt:"
-
-msgid "Perform reboot"
-msgstr "Wykonaj restart"
-
-msgid "Perform reset"
-msgstr "Wykonaj reset"
-
-msgid "Phy Rate:"
-msgstr "Szybkość Phy:"
-
-msgid "Physical Settings"
-msgstr "Ustawienia sprzętowe"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "Pktw."
-
-msgid "Please enter your username and password."
-msgstr "Proszę wprowadź swój login i hasło."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Proszę czekać: Ponowne uruchamianie..."
-
-msgid "Policy"
-msgstr "Zasada"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr "Port %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "Port %d jest nietagowany w wielu VLAN`ach!"
-
-msgid "Port status:"
-msgstr "Status portu:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Zakładaj że klient jest martwy po danej ilości błedów odpowiedzi echa LCP, "
-"wpisz 0 aby zignorować błędy"
-
-msgid "Prevents client-to-client communication"
-msgstr "Zapobiegaj komunikacji klientów pomiędzy sobą"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Kontroler bezprzewodowy Prism2/2.5/3 802.11b"
-
-msgid "Proceed"
-msgstr "Wykonaj"
-
-msgid "Processes"
-msgstr "Procesy"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protokół"
-
-msgid "Protocol family"
-msgstr "Rodzina protokołów"
-
-msgid "Protocol of the new interface"
-msgstr "Protokół nowego interfejsu"
-
-msgid "Protocol support is not installed"
-msgstr "Wsparcie dla protokołu nie jest zainstalowane"
-
-# Opcja dotyczy włączenia serwera czasu, więc "podaj" nie jest właściwym tłumaczeniem w tym miejscu - obsy
-msgid "Provide NTP server"
-msgstr "Włącz serwer NTP"
-
-msgid "Provide new network"
-msgstr "Utwórz nową sieć"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Jakość"
-
-msgid "RTS/CTS Threshold"
-msgstr "Próg RTS/CTS"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "Szybkość RX"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "Kontroler bezprzewodowy RaLink 802.11%s"
-
-msgid "Radius-Accounting-Port"
-msgstr "Port Radius-Accounting"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Sekret Radius-Accounting"
-
-msgid "Radius-Accounting-Server"
-msgstr "Serwer Radius-Accounting"
-
-msgid "Radius-Authentication-Port"
-msgstr "Port Radius-Authentication"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Sekret Radius-Authentication"
-
-msgid "Radius-Authentication-Server"
-msgstr "Serwer Radius-Authentication"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Przejrzyj plik <code>/etc/ethers</code> aby skonfigurować serwer <abbr title="
-"\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Naprawdę usunąć ten interfejs? Usunięcie nie może zostać cofnięte!\n"
-"Możesz stracić dostęp do tego urządzenia, jeśli jesteś połączony przez ten "
-"interfejs!"
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Naprawdę usunąć tę sieć bezprzewodową? Usunięcie nie może zostać cofnięte!\n"
-"Możesz stracić dostęp do tego urządzenia, jeśli jesteś połączony przez tę "
-"sieć!"
-
-msgid "Really reset all changes?"
-msgstr "Naprawdę usunąć wszelkie zmiany?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Naprawdę wyłączyć interfejs \"%s\"?\n"
-"Możesz stracić dostęp do tego urządzenia jeśli jesteś połączony przez ten "
-"interfejs!"
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Naprawdę wyłączyć tę sieć?\n"
-"Możesz stracić dostęp do tego urządzenia jeśli jesteś połączony przez ten "
-"interfejs!"
-
-msgid "Really switch protocol?"
-msgstr "Naprawdę zmienić protokół?"
-
-msgid "Realtime Connections"
-msgstr "Połączenia w czasie rzeczywistym"
-
-msgid "Realtime Graphs"
-msgstr "Wykresy w czasie rzeczywistym"
-
-msgid "Realtime Load"
-msgstr "Obciążenie w czasie rzeczywistym"
-
-msgid "Realtime Traffic"
-msgstr "Ruch w czasie rzeczywistym"
-
-msgid "Realtime Wireless"
-msgstr "WiFi w czasie rzeczywistym"
-
-msgid "Rebind protection"
-msgstr "Przypisz ochronę"
-
-msgid "Reboot"
-msgstr "Restartuj"
-
-msgid "Rebooting..."
-msgstr "Ponowne uruchamianie..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Uruchamia ponownie system na twoim urządzeniu"
-
-msgid "Receive"
-msgstr "Odebrane"
-
-msgid "Receiver Antenna"
-msgstr "Antena odbiorcza"
-
-msgid "Reconnect this interface"
-msgstr "Połącz ponownie ten interfejs"
-
-msgid "Reconnecting interface"
-msgstr "Łączę ponownie interfejs"
-
-msgid "References"
-msgstr "Referencje"
-
-msgid "Regulatory Domain"
-msgstr "Domena regulacji"
-
-msgid "Relay"
-msgstr "Przekaźnik"
-
-msgid "Relay Bridge"
-msgstr "Most przekaźnikowy"
-
-msgid "Relay between networks"
-msgstr "Przekaźnik pomiędzy sieciami"
-
-msgid "Relay bridge"
-msgstr "Most przekaźnikowy"
-
-msgid "Remote IPv4 address"
-msgstr "Zdalny adres IPv4"
-
-msgid "Remove"
-msgstr "Usuń"
-
-msgid "Repeat scan"
-msgstr "Powtórz skanowanie"
-
-msgid "Replace entry"
-msgstr "Zamień wpis"
-
-msgid "Replace wireless configuration"
-msgstr "Zamień konfigurację WiFi"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Wymagany dla niektórych dostawców internetu, np. Charter z DOCSIS 3"
-
-msgid "Reset"
-msgstr "Resetuj"
-
-msgid "Reset Counters"
-msgstr "Wyczyść liczniki"
-
-msgid "Reset to defaults"
-msgstr "Resetuj do domyślnych"
-
-msgid "Resolv and Hosts Files"
-msgstr "Pliki Resolv i Hosts"
-
-msgid "Resolve file"
-msgstr "Plik Resolve"
-
-msgid "Restart"
-msgstr "Uruchom ponownie"
-
-msgid "Restart Firewall"
-msgstr "Uruchom ponownie firewalla"
-
-msgid "Restore backup"
-msgstr "Przywróć kopię zapasową"
-
-msgid "Reveal/hide password"
-msgstr "Odsłoń/Ukryj hasło"
-
-msgid "Revert"
-msgstr "Przywróć"
-
-msgid "Root"
-msgstr "Root"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Katalog Root`a dla plików udostępnianych przez TFTP"
-
-msgid "Router Model"
-msgstr "Model Routera"
-
-msgid "Router Name"
-msgstr "Nazwa Routera"
-
-msgid "Router Password"
-msgstr "Hasło Routera"
-
-msgid "Routes"
-msgstr "Ścieżki routingu"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Ścieżki routingu pokazują routerowi przez który interfejs oraz którą bramę "
-"może skomunikować się z daną siecią lub komputerem."
-
-msgid "Rule #"
-msgstr "Zasada #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-"Sprawdź czy system plików nie zawiera błędów przed zamontowaniem urządzenia"
-
-msgid "Run filesystem check"
-msgstr "Sprawdź czy system plików nie zawiera błędów"
-
-msgid "SSH Access"
-msgstr "Dostęp SSH"
-
-msgid "SSH-Keys"
-msgstr "Klucze SSH"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Zachowaj"
-
-msgid "Save & Apply"
-msgstr "Zastosuj i Zachowaj"
-
-msgid "Save &#38; Apply"
-msgstr "Zachowaj i Zastosuj"
-
-msgid "Scan"
-msgstr "Skanuj"
-
-# Raczej nie stosuje się kilku dużych liter w tym samym
-msgid "Scheduled Tasks"
-msgstr "Zaplanowane zadania"
-
-msgid "Section added"
-msgstr "Dodano sekcję"
-
-msgid "Section removed"
-msgstr "Usunięto sekcję"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Aby poznać szczegóły przeczytaj stronę instrukcji \"mount\""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"Co podany czas (w sekundach) wyślij zapytania LCP echo, to ustawienie działa "
-"tylko gdy ustawiony jest próg błędu LCP echo"
-
-msgid "Send router solicitations"
-msgstr "Wyślij pakiet wymuszający rozgłoszenia routera"
-
-msgid "Separate Clients"
-msgstr "Rozdziel klientów"
-
-msgid "Separate WDS"
-msgstr "Rozdziel WDS"
-
-msgid "Server Settings"
-msgstr "Ustawienia Serwera"
-
-msgid "Service Name"
-msgstr "Nazwa serwisu"
-
-msgid "Service Type"
-msgstr "Typ serwisu"
-
-msgid "Services"
-msgstr "Serwisy"
-
-msgid "Setup DHCP Server"
-msgstr "Ustawienia serwera DHCP"
-
-msgid "Setup Time Synchronization"
-msgstr "Ustawienia synchronizacji czasu"
-
-msgid "Show current backup file list"
-msgstr "Pokaż aktualną listę plików do backupu"
-
-msgid "Shutdown this interface"
-msgstr "Wyłącz ten interfejs"
-
-msgid "Shutdown this network"
-msgstr "Wyłącz tą sieć"
-
-msgid "Signal"
-msgstr "Sygnał"
-
-msgid "Signal:"
-msgstr "Sygnał:"
-
-msgid "Size"
-msgstr "Rozmiar"
-
-msgid "Skip"
-msgstr "Pomiń"
-
-msgid "Skip to content"
-msgstr "Pomiń do zawartości"
-
-msgid "Skip to navigation"
-msgstr "Pomiń do nawigacji"
-
-msgid "Slot time"
-msgstr "Szczelina czasowa"
-
-msgid "Software"
-msgstr "Oprogramowanie"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Wartości pewnych pól są niewłaściwe, nie mogę ich zachować!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Przepraszamy, ale żądany obiekt nie został znaleziony."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Przepraszamy, ale serwer napotkał nieoczekiwany błąd."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"Przepraszamy, ale nie ma wsparcia dla trybu sysupgrade. Nowy firmware musi "
-"być wgrany ręcznie. Sprawdź stronę OpenWrt wiki, aby uzyskać instrukcję dla "
-"danego urządzenia."
-
-msgid "Sort"
-msgstr "Posortuj"
-
-msgid "Source"
-msgstr "Źródło"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "Określa czas życia rozgłoszenia preferowanego prefiksu w sekundach"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Określa czas życia rozgłoszenia obowiązującego prefiksu w sekundach"
-
-msgid "Specifies the button state to handle"
-msgstr "Określa zachowanie w zależności od stanu przycisku"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Podaje katalog do którego jest podłączone urządzenie"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Określa port nasłuchu dla tej instancji <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Określa maksymalną ilość błędów dla zapytania ARP przed założeniem, że host "
-"jest martwy"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-"Określa maksymalny czas w sekundach przed założeniem, że host jest martwy"
-
-msgid "Specify the secret encryption key here."
-msgstr "Określ tajny klucz szyfrowania."
-
-msgid "Start"
-msgstr "Uruchomienie"
-
-msgid "Start priority"
-msgstr "Priorytet uruchomienia"
-
-msgid "Startup"
-msgstr "Autostart"
-
-msgid "Static IPv4 Routes"
-msgstr "Statyczne ścieżki routingu IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Statyczne ścieżki routingu IPv6"
-
-msgid "Static Leases"
-msgstr "Dzierżawy statyczne"
-
-msgid "Static Routes"
-msgstr "Statyczne ścieżki routingu"
-
-msgid "Static WDS"
-msgstr "Statyczny WDS"
-
-msgid "Static address"
-msgstr "Stały adres"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Statyczne dzierżawy są używane do przypisania stałych adresów IP i "
-"symbolicznych nazw klientom DHCP. Są one również wymagane dla "
-"niedynamicznych konfiguracji interfejsu, gdzie obsługiwane są tylko hosty z "
-"odpowiednim dzierżawami."
-
-msgid "Status"
-msgstr "Stan"
-
-msgid "Stop"
-msgstr "Stop"
-
-msgid "Strict order"
-msgstr "Zachowaj kolejność"
-
-msgid "Submit"
-msgstr "Wyślij"
-
-msgid "Swap Entry"
-msgstr "Zamień wpis"
-
-msgid "Switch"
-msgstr "Przełącznik"
-
-msgid "Switch %q"
-msgstr "Przełącznik %q"
-
-msgid "Switch %q (%s)"
-msgstr "Przełącznik %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Protokół przełącznika"
-
-msgid "Sync with browser"
-msgstr "Synchronizuj z przeglądarką"
-
-msgid "Synchronizing..."
-msgstr "Synchronizacja..."
-
-msgid "System"
-msgstr "System"
-
-msgid "System Log"
-msgstr "Log systemowy"
-
-msgid "System Properties"
-msgstr "Właściwości systemu"
-
-# Wszędzie używane jest "loga" z małej litery.
-msgid "System log buffer size"
-msgstr "Rozmiar bufora loga systemu"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Ustawienia TFTP"
-
-msgid "TFTP server root"
-msgstr "root serwera TFTP"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "Szybkość TX"
-
-msgid "Table"
-msgstr "Tablica"
-
-msgid "Target"
-msgstr "Cel"
-
-msgid "Terminate"
-msgstr "Zakończ"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"Sekcja <em>Konfiguracja Urządzenia</em> zawiera sprzętowe ustawienia toru "
-"transmisji radiowej takie jak kanał, moc sygnału, czy wybór anteny, które to "
-"są wspólne dla wszystkich zdefiniowanych sieci bezprzewodowych (jeśli tor "
-"transmisji jest kompatybilny z transmisją multi-SSID). Ustawienia sieci "
-"takie jak szyfrowanie lub tryb operacji są zebrane w sekcji <em>Konfiguracja "
-"Interfejsu</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Pakiet <em>libiwinfo-lua</em> nie jest zainstalowany. Musisz go zainstalować "
-"aby WiFi prawidłowo zadziałało!"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"Prefiks IPv6 przypisany do dostawcy, zazwyczaj kończy się <code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Dozwolone znaki to: <code>A-Z</code>, <code>a-z</code>, <code>0-9</code> "
-"oraz <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"Plik urządzenia - pamięci lub partycji (<abbr title=\"na przykład\">np.</"
-"abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"System plików, który został użyty do sformatowania nośnika (<abbr title=\"na "
-"przykład\">np.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</"
-"abbr></samp>)"
-
-# Przycisk nazywa się "Wykonaj", więc taki sam opis ma być w podpowiedzi.
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Obraz flash`a został przesłany. Poniżej znajduje się suma kontrolna i "
-"rozmiar obrazu, porównaj je z sumą kontrolną i rozmiarem oryginału, aby "
-"upewnić się, że został przesłany poprawnie.<br /> Wciśnij \"Wykonaj\" aby "
-"kontynuować aktualizację."
-
-msgid "The following changes have been committed"
-msgstr "Następujące zmiany zostały zatwierdzone"
-
-msgid "The following changes have been reverted"
-msgstr "Następujące zmiany zostały odrzucone"
-
-msgid "The following rules are currently active on this system."
-msgstr "Następujące zasady są obecnie aktywne w tym systemie."
-
-msgid "The given network name is not unique"
-msgstr "Podana sieć NIE jest unikalna"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"Sprzęt nie jest urządzeniem typu multi-SSID, więc bieżąca konfiguracja "
-"zostanie nadpisana nową jeśli będziesz kontynuować."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-"Długość prefiksu IPv4 w bitach, pozostała część jest używana w adresach IPv6."
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "Długość prefiksu IPv6 w bitach"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"Porty sieciowe na tym urządzeniu mogą być łączone w kilka sieci <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>, w których komputery mogą "
-"komunikować się ze sobą bezpośrednio. Sieci <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr> są często stosowane w celu oddzielenia różnych "
-"segmentów sieci. Często domyślnie jeden port typu Uplink jest wykorzystywany "
-"do połączenia z większą siecią, taką jak Internet, a inne porty dla sieci "
-"lokalnej."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "Wybrany protokół potrzebuje przypisanego urządzenia"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"System usuwa teraz partycję konfiguracji i zrestartuje się po zakończeniu."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"System wykonuje flashowanie.<br /> NIE WYŁĄCZAĆ URZĄDZENIA!<br /> Poczekaj "
-"kilka minut, zanim spróbujesz połączyć się ponownie. W zależności od "
-"ustawień może być konieczne odnowienie adresu Twojego komputera, aby dostać "
-"się do urządzenia."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"Przesłany plik obrazu nie zawiera obsługiwanego formatu. Upewnij się, że "
-"wybrałeś odpowiedni format obrazu dla danej platformy."
-
-msgid "There are no active leases."
-msgstr "Brak aktywnych dzierżaw."
-
-msgid "There are no pending changes to apply!"
-msgstr "Brak oczekujących zmian do zastosowania!"
-
-msgid "There are no pending changes to revert!"
-msgstr "Brak oczekujących zmian do przywrócenia!"
-
-msgid "There are no pending changes!"
-msgstr "Brak oczekujących zmian!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Żadne urządzenie nie jest jeszcze przypisane. Proszę dołączyć urządzenie "
-"sieciowe na karcie \"Ustawienia sprzętowe\""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Na routerze hasło nie jest jeszcze ustawione. Proszę skonfigurować hasło "
-"roota, aby zabezpieczyć interfejs WWW i włączyć SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr "Ten adres IPv4 przekaźnika"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Jest to lista globalnych wzorców dopasowywania plików i katalogów "
-"uwzględnianych podczas przeprowadzania aktualizacji z użyciem \"sysupgrade"
-"\". Zmodyfikowane pliki w /etc/config/ i w niektórych innych ustawieniach są "
-"automatycznie zachowywane."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"To jest 32-bajtowy heksadecymalny zakodowany identyfikator użytkownika, a "
-"nie login"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"To jest zawartość pliku /etc/rc.local. Wstaw tutaj własne komendy (przed "
-"'exit 0'), aby zostały wykonane pod koniec procesu rozruchu."
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"To jest lokalny adres końcowy przypisany przez tunnel broker'a, zwykle "
-"kończący się z <code>:2</code>"
-
-# w tłumaczeniu pojawiła się spacja po DHCP</ abbr> co powoduje niepoprawne wyświetlanie się strony z lang PL
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"To jest jedyny serwer <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr> w sieci lokalnej"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"To jest system crontab, w którym mogą być zdefiniowane zaplanowane zadania."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-"Zwykle jest to adres najbliższego PoP prowadzonego przez tunnel broker'a"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Poniższa lista przedstawia aktualnie uruchomione procesy systemowe i ich "
-"status."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-"Poniższa strona umożliwia konfigurację działania niestandardowych przycisków"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "Poniższa strona przedstawia aktualnie aktywne połączenia sieciowe."
-
-msgid "This section contains no values yet"
-msgstr "Ta sekcja nie zawiera jeszcze żadnych wartości"
-
-msgid "Time Synchronization"
-msgstr "Synchronizacja czasu"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "Synchronizacja czasu nie jest jeszcze skonfigurowana."
-
-msgid "Timezone"
-msgstr "Strefa czasowa"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Aby przywrócić pliki konfiguracyjne, można tutaj wczytać wcześniej utworzone "
-"archiwum kopii zapasowej."
-
-msgid "Total Available"
-msgstr "Całkowicie dostępna"
-
-msgid "Traceroute"
-msgstr "Trasa routowania"
-
-msgid "Traffic"
-msgstr "Ruch"
-
-msgid "Transfer"
-msgstr "Transfer"
-
-msgid "Transmission Rate"
-msgstr "Prędkość transmisji"
-
-msgid "Transmit"
-msgstr "Nadawanie"
-
-msgid "Transmit Power"
-msgstr "Siła nadawania"
-
-msgid "Transmitter Antenna"
-msgstr "Antena nadajnika"
-
-msgid "Trigger"
-msgstr "Trigger"
-
-msgid "Trigger Mode"
-msgstr "Tryb Trigger"
-
-msgid "Tunnel ID"
-msgstr "Numer identyfikacyjny tunelu"
-
-msgid "Tunnel Interface"
-msgstr "Interfejs tunelu"
-
-msgid "Turbo Mode"
-msgstr "Tryb Turbo"
-
-msgid "Tx-Power"
-msgstr "Moc nadawania"
-
-msgid "Type"
-msgstr "Typ"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "Tylko UMTS"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "Urządzenie USB"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Nie można wysłać"
-
-msgid "Unknown"
-msgstr "Nieznany"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Nieznany błąd, hasło nie zostało zmienione"
-
-msgid "Unmanaged"
-msgstr "Niezarządzalny"
-
-msgid "Unsaved Changes"
-msgstr "Niezapisane zmiany"
-
-msgid "Unsupported protocol type."
-msgstr "Nieobsługiwany typ protokołu."
-
-msgid "Update lists"
-msgstr "Aktualizuj listy"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Prześlij zgodny z funkcją sysupgrade obraz tutaj, aby zastąpić aktualnie "
-"działające firmware. Zaznacz opcję \"Zachowaj ustawienia\", aby zachować "
-"bieżącą konfigurację (wymaga zgodnego obrazu firmware OpenWrt)."
-
-msgid "Upload archive..."
-msgstr "Załaduj archiwum..."
-
-msgid "Uploaded File"
-msgstr "Załaduj plik"
-
-msgid "Uptime"
-msgstr "Czas pracy"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Użyj <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Użyj bramy DHCP"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Użyj serwerów DNS rozgłaszanych przez peera"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Użyj kodów kraju ISO/IEC 3166 alpha2"
-
-msgid "Use MTU on tunnel interface"
-msgstr "Użyj MTU na interfejsie tunelu"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Użyj TTL na interfejsie tunelu"
-
-msgid "Use as root filesystem"
-msgstr "Użyj systemu plików root'a"
-
-msgid "Use broadcast flag"
-msgstr "Użyj flagi rozgłaszania"
-
-msgid "Use custom DNS servers"
-msgstr "Użyj własnych serwerów DNS"
-
-msgid "Use default gateway"
-msgstr "Użyj domyślnej bramy"
-
-msgid "Use gateway metric"
-msgstr "Użyj metryki bramy"
-
-msgid "Use preferred lifetime"
-msgstr "Użyj preferowanego czasu życia"
-
-msgid "Use routing table"
-msgstr "Użyj tabeli routingu"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Użyj przycisku <em>Dodaj</em>, aby dodać nowy wpis dzierżawy. <em>Adres "
-"MAC</em> identyfikuje hosta, <em>Adres IPv4</em> określa, którego stałego "
-"adresu użyć, natomiast <em>Nazwa hosta</em> jest przypisana jako symboliczna "
-"nazwa do określonego hosta."
-
-msgid "Use valid lifetime"
-msgstr "Użyj prawidłowego czasu życia"
-
-# Przy liście zamontowanych systemów plików
-msgid "Used"
-msgstr "Użyte"
-
-msgid "Used Key Slot"
-msgstr "Użyte gniazdo klucza"
-
-msgid "Username"
-msgstr "Nazwa użytkownika"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Interfejs VLAN"
-
-msgid "VLANs on %q"
-msgstr "Sieci VLAN na %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "Sieci VLAN na %q (%s)"
-
-msgid "VPN Server"
-msgstr "Serwer VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "Klasa producenta do wysłania podczas żądania DHCP"
-
-msgid "Verify"
-msgstr "Zweryfikuj"
-
-msgid "Version"
-msgstr "Wersja"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "Otwarty system WEP"
-
-msgid "WEP Shared Key"
-msgstr "Współdzielony klucz WEP"
-
-msgid "WEP passphrase"
-msgstr "Hasło WEP"
-
-msgid "WMM Mode"
-msgstr "Tryb WMM"
-
-msgid "WPA passphrase"
-msgstr "Hasło WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"Kodowanie WPA wymaga zainstalowanych modułów wpa_supplicant (na tryb "
-"klienta) lub hostapd (dla trybów AP lub ad-hoc)"
-
-msgid "Waiting for changes to be applied..."
-msgstr "Czekanie na wprowadzenie zmian..."
-
-msgid "Waiting for command to complete..."
-msgstr "Czekanie na wykonanie komendy..."
-
-msgid "Warning"
-msgstr "Ostrzeżenie"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Ostrzeżenie: Pozostały niezapisane zmian, które zostaną utracone podczas "
-"restartu!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr "Sieć bezprzewodowa"
-
-msgid "Wireless Adapter"
-msgstr "Adapter bezprzewodowy"
-
-msgid "Wireless Network"
-msgstr "Sieć bezprzewodowa"
-
-msgid "Wireless Overview"
-msgstr "Przegląd sieci bezprzewodowy"
-
-msgid "Wireless Security"
-msgstr "Zabezpieczenie sieci bezprzewodowej"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Sieć bezprzewodowa jest wyłączona lub niepołączona"
-
-msgid "Wireless is restarting..."
-msgstr "Restart sieci bezprzewodowej..."
-
-msgid "Wireless network is disabled"
-msgstr "Sieć bezprzewodowa jest wyłączona"
-
-msgid "Wireless network is enabled"
-msgstr "Sieć bezprzewodowa jest włączona"
-
-msgid "Wireless restarted"
-msgstr "Zrestartowano sieć bezprzewodową"
-
-msgid "Wireless shut down"
-msgstr "Wyłączanie sieci bezprzewodowej"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Zapisz otrzymane żądania DNS do syslog'a"
-
-msgid "XR Support"
-msgstr "Wsparcie XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Tutaj można włączyć lub wyłączyć zainstalowane skrypty. Zmiany zostaną "
-"zastosowane po ponownym uruchomieniu urządzenia.<br /><strong>Ostrzeżenie: "
-"Jeśli wyłączysz podstawowe skrypty typu \"networks\", urządzenie może stać się "
-"nieosiągalne!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Musisz włączyć obsługę Java Script w swojej przeglądarce, inaczej LuCI nie "
-"będzie działać poprawnie."
-
-msgid "any"
-msgstr "jakikolwiek"
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "bridged"
-
-msgid "create:"
-msgstr "utwórz:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "utwórz bridge na określonych interfejsach"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "wyłącz"
-
-msgid "expired"
-msgstr "wygasły"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"plik, w którym podano żądania <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr>, zostanie zachowany"
-
-msgid "forward"
-msgstr "przekaż"
-
-msgid "full-duplex"
-msgstr "pełny-duplex"
-
-msgid "half-duplex"
-msgstr "pół-duplex"
-
-msgid "help"
-msgstr "pomoc"
-
-msgid "hidden"
-msgstr "ukryty"
-
-msgid "if target is a network"
-msgstr "jeżeli celem jest sieć"
-
-msgid "input"
-msgstr "wejście"
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "lokalny plik <abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "no"
-msgstr "nie"
-
-# skorzystałem z niemieckiego tłumaczenia
-msgid "no link"
-msgstr "niepowiązane"
-
-msgid "none"
-msgstr "żaden"
-
-msgid "off"
-msgstr "wyłączone"
-
-msgid "on"
-msgstr "włączone"
-
-msgid "open"
-msgstr "otwarte"
-
-msgid "routed"
-msgstr "routowane"
-
-msgid "tagged"
-msgstr "tagowane"
-
-msgid "unknown"
-msgstr "nieznane"
-
-msgid "unlimited"
-msgstr "nielimitowane"
-
-msgid "unspecified"
-msgstr "nieokreślone"
-
-msgid "unspecified -or- create:"
-msgstr "nieokreślone -lub- utwórz:"
-
-msgid "untagged"
-msgstr "nietagowane"
-
-msgid "yes"
-msgstr "tak"
-
-msgid "« Back"
-msgstr "« Wróć"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Czekanie na router..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Włącz wbudowany serwer NTP"
-
-#~ msgid "Active Leases"
-#~ msgstr "Aktywne dzierżawy"
-
-#~ msgid "Open"
-#~ msgstr "Otwórz"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Przepływność"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Konfiguracja / Zastosuj"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Konfiguracja / zmiany"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Konfiguracja / cofnięcie zmian"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "Adres MAC"
diff --git a/po/pl/commands.po b/po/pl/commands.po
deleted file mode 100644
index ed181ce..0000000
--- a/po/pl/commands.po
+++ /dev/null
@@ -1,95 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-11 00:00+0200\n"
-"Last-Translator: farmer92 <sebastian.stolorz@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr "Argumenty:"
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr "Zbieram dane:"
-
-msgid "Command"
-msgstr "Komenda"
-
-msgid "Command failed"
-msgstr "Zła komenda"
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr "Konfiguracja"
-
-msgid "Custom Commands"
-msgstr "Własne komendy"
-
-msgid "Custom arguments"
-msgstr "Własne argumenty"
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr "Opis"
-
-msgid "Download"
-msgstr "Download"
-
-msgid "Failed to execute command!"
-msgstr "Nie można wykonać komendy!"
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr "Ładowanie"
-
-msgid "Public access"
-msgstr "Publiczny dostęp"
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/pl/coovachilli.po b/po/pl/coovachilli.po
deleted file mode 100644
index 7dc2ef8..0000000
--- a/po/pl/coovachilli.po
+++ /dev/null
@@ -1,27 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-25 06:22+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Konfiguracja sieci"
-
-msgid "RADIUS configuration"
-msgstr "Konfiguracja RADIUS`a"
-
-msgid "UAM and MAC Authentication"
-msgstr "Uwierzytelnianie UAM oraz MAC"
diff --git a/po/pl/ddns.po b/po/pl/ddns.po
deleted file mode 100644
index 5163918..0000000
--- a/po/pl/ddns.po
+++ /dev/null
@@ -1,90 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2013-01-06 13:08+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "Sprawdzaj zmiany adresu IP co"
-
-msgid "Check-time unit"
-msgstr "Jednostka czasu sprawdzania"
-
-msgid "Custom update-URL"
-msgstr "Niestandardowy adres aktualizacyjny"
-
-msgid "Dynamic DNS"
-msgstr "Dynamiczny DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Dynamiczny DNS umożliwia dostęp do routera z użyciem stałej nazwy hosta, "
-"pomimo posiadania dynamicznie zmieniającego się adresu IP."
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "Event interface"
-msgstr "Interfejs"
-
-msgid "Force update every"
-msgstr "Wymuszaj aktualizację co"
-
-msgid "Force-time unit"
-msgstr "Jednostka czasu wymuszania"
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid "Network"
-msgstr "Sieć"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "Określa interfejs na którym zostanie uruchomiony skrypt ddns."
-
-msgid "Password"
-msgstr "Hasło"
-
-msgid "Service"
-msgstr "Usługa"
-
-msgid "Source of IP address"
-msgstr "Źródło adresu IP"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Nazwa użytkownika"
-
-msgid "custom"
-msgstr "niestandardowe"
-
-# Hours
-msgid "h"
-msgstr "godz."
-
-msgid "interface"
-msgstr "interfejs"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
-
-msgid "network"
-msgstr "sieć"
diff --git a/po/pl/diag_core.po b/po/pl/diag_core.po
deleted file mode 100644
index 0935fdb..0000000
--- a/po/pl/diag_core.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-08 13:17+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr "Konfiguracja diagnostyki"
-
-msgid "Diagnostics"
-msgstr "Diagnostyka"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Liczba testów diagnostycznych dostępnych w tym menu jest uzależniona od "
-"modułów zainstalowanych w tym urządzeniu."
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Wpisy w menu pozwalają na wykonanie testów diagnostycznych systemu pomocnych "
-"w rozwiązywaniu problemów."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"W tym menu można skonfigurować diagnostykę sieci, jak np. skanowanie "
-"urządzeń sieciowych lub testy ping."
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d_diag"
diff --git a/po/pl/diag_devinfo.po b/po/pl/diag_devinfo.po
deleted file mode 100644
index 32ccdce..0000000
--- a/po/pl/diag_devinfo.po
+++ /dev/null
@@ -1,222 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 13:44+0200\n"
-"Last-Translator: mesiu84 <kmesek84@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Actions"
-msgstr "Akcje"
-
-msgid "Add"
-msgstr "Dodaj"
-
-msgid "Beginning of MAC address range"
-msgstr "Początek zakresu MAC adresów"
-
-msgid "Config Phone Scan"
-msgstr "Konfiguruj skanowanie telefonów"
-
-msgid "Configure"
-msgstr "Konfiguruj"
-
-msgid "Configure Scans"
-msgstr "Konfiguruj skany"
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-"Konfiguruj skanowanie dla urządzeń w wybranych sieciach. Zmniejszanie "
-"\"Limitu czasu\", \"Liczby powtórzeń\" i/lub \"Oczekiwania między żądaniami"
-"\" może przyspieszyć skany, ale może też uniemożliwić wykrycie niektórych "
-"urządzeń."
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-"Konfiguruj skanowanie dla wspieranych urządzeń SIP w wybranych sieciach. "
-"Zmniejszanie \"Limitu czasu\", \"Liczby powtórzeń\" i/lub \"Oczekiwania "
-"między żądaniami\" może przyspieszyć skany, ale może też uniemożliwić "
-"wykrycie niektórych urządzeń."
-
-msgid "Delete"
-msgstr "Usuń"
-
-msgid "Device Scan Config"
-msgstr "Konfiguruj skanowanie urządzeń"
-
-msgid "Device Type"
-msgstr "Typ urządzenia"
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr "Urządzenia w sieci"
-
-msgid "Edit"
-msgstr "Edytuj"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "End of MAC address range"
-msgstr "Koniec zakresu adresów MAC"
-
-msgid "Go to relevant configuration page"
-msgstr "Idź do stosownej strony konfiguracyjnej"
-
-msgid "IP Address"
-msgstr "Adres IP"
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid "Invalid"
-msgstr "Nieprawidłowe"
-
-msgid "Link to Device"
-msgstr "Połączenie do urządzenia"
-
-msgid "MAC Address"
-msgstr "Adres MAC"
-
-msgid "MAC Device Info Overrides"
-msgstr "Nadpisywanie informacji o adresie MAC urządzenia"
-
-msgid "MAC Device Override"
-msgstr "Pomijanie adresu MAC urządzenia"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"Zakres adresów MAC i informacje użyte do zastąpienia baz danych systemowych "
-"i IEEE"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Ilośś milisekund pauzy pomiędzy zapytaniami (domyślnie 100)"
-
-msgid "Model"
-msgstr "Model"
-
-msgid "Name"
-msgstr "Nazwa"
-
-msgid "Network Device Scan"
-msgstr "Skan urządzeń w sieci"
-
-msgid "Network Device Scanning Configuration"
-msgstr "Ustawienia skanowania urządzeń w sieci"
-
-msgid "Networks to scan for devices"
-msgstr "Sieci do skanowania w poszukiwaniu urządzeń"
-
-msgid "Networks to scan for supported devices"
-msgstr "Sieci do skanowania w poszukiwaniu wspieranych urządzeń"
-
-msgid "No SIP devices"
-msgstr "Brak urządzeń SIP"
-
-msgid "No devices detected"
-msgstr "Nie wykryto urządzeń"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Ilość powtórzeń wysłania żądania (domyślnie 1)"
-
-msgid "OUI Owner"
-msgstr "Właściciel OUI"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Zastąp informacje zwracanych przez skrypt MAC to Device Info Script (MAC-to-"
-"devinfo) dla określonego zakresu adresów MAC"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr "Wykonaj skany (to może potrwać kilka minut)"
-
-msgid "Phone Information"
-msgstr "Informacje o telefonie"
-
-msgid "Phone Scan"
-msgstr "Skanowanie telefonów"
-
-msgid "Phone Scanning Configuration"
-msgstr "Konfiguracja skanowania telefonu"
-
-msgid "Phones"
-msgstr "Telefony"
-
-msgid "Ports"
-msgstr "Porty"
-
-msgid "Raw"
-msgstr "Surowe"
-
-msgid "Repeat Count"
-msgstr "Ilość powtórzeń"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr "Powtórz skany (to może potrwać kilka minut)"
-
-msgid "SIP Device Information"
-msgstr "Informacje o urządzeniu SIP"
-
-msgid "SIP Device Scan"
-msgstr "Skanowanie urządzeń SIP"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Konfiguracja skanowania urządzeń SIP"
-
-msgid "SIP Devices on Network"
-msgstr "Urządzenia SIP w sieci"
-
-msgid "SIP devices discovered for"
-msgstr "Urządzenia SIP znalezione dla"
-
-msgid "Scan for devices on specified networks."
-msgstr "Skanuj w poszukiwaniu urządzeń w wybranych sieciach."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr "Skanuj w poszukiwaniu wspieranych urządzeń SIP w wybranych sieciach."
-
-msgid "Scanning Configuration"
-msgstr "Ustawienia skanowania"
-
-msgid "Scans for devices on specified networks."
-msgstr "Scans for devices on specified networks."
-
-msgid "Sleep Between Requests"
-msgstr "Pauza pomiędzy zapytaniami"
-
-msgid "Subnet"
-msgstr "Podsieć"
-
-msgid "This section contains no values yet"
-msgstr "Ta sekcja nie zawiera jeszcze wartości"
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Czas oczekiwania na odpowiedź w sekundach (domyślnie 10)"
-
-msgid "Timeout"
-msgstr "Czas oczekiwania"
-
-msgid "Use Configuration"
-msgstr "Użyj konfiguracji"
-
-msgid "Vendor"
-msgstr "Sprzedawca"
-
-msgid "check other networks"
-msgstr "sprawdź inne sieci"
diff --git a/po/pl/ffwizard.po b/po/pl/ffwizard.po
deleted file mode 100644
index a944149..0000000
--- a/po/pl/ffwizard.po
+++ /dev/null
@@ -1,178 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-30 12:42+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Pozwól na wysyłanie anonimowych statystyk o tym węźle"
-
-msgid "Channel"
-msgstr "Kanał"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Zaznacz to, aby chronić Twoją sieć LAN przed innymi węzłami i klientami"
-
-msgid "Configure network"
-msgstr "Skonfiguruj sieć"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr "Połącz swój węzeł z innymi węzłami przez tunel przez internet."
-
-msgid "DHCP IP range"
-msgstr "Zakres IP dla DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP automatycznie przypisze adresy IP klientom"
-
-msgid "DNS Server"
-msgstr "Serwer DNS"
-
-msgid "Enable DHCP"
-msgstr "Włącz DHCP"
-
-msgid "Gateway"
-msgstr "Brama"
-
-msgid "Heartbeat"
-msgstr "Bicie serca"
-
-msgid "IP address"
-msgstr "Adres IP"
-
-# Po polsku dla polaka jest tak samo niezrozumiałe jak po angielsku dla anglika, więc tłumaczenie uważam za dobre.
-msgid "L2gvpn tunnel"
-msgstr "Tunel L2gvpn"
-
-msgid "Limit download bandwidth"
-msgstr "Ogranicz szybkość pobierania"
-
-msgid "Limit upload bandwidth"
-msgstr "Ogranicz szybkość wysyłania"
-
-msgid "Mesh IP address"
-msgstr "Adres IP typu Mesh"
-
-msgid "Mesh IPv6 Address"
-msgstr "Adres IPv6 typu Mesh"
-
-msgid "Netmask"
-msgstr "Maska sieci"
-
-msgid "Password"
-msgstr "Hasło"
-
-msgid "Password confirmation"
-msgstr "Potwierdź hasło"
-
-msgid "Password successfully changed"
-msgstr "Hasło pomyślnie zmienione"
-
-msgid "Protect LAN"
-msgstr "Chroń LAN"
-
-msgid "Protocol"
-msgstr "Protokół"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Zaznacz to pole, aby skonfigurować interfejsy sieciowe."
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Zaznacz to, aby pozwolić innym na używanie Twojego łącza, by korzystać z "
-"internetu."
-
-msgid "Share your internet connection"
-msgstr "Udostępnij swoje łącze innym"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Zakres IP, z którego klientom są przyznawane adresy IP (np. 10.1.2.1/28). "
-"Jeśli to zakres wewnątrz zakresu Twojej sieci mesh, będzie ogłoszony jako "
-"HNA. Każdy inny zakres będzie używał NAT. Jeśli pozostawisz pole puste, "
-"zostanie użyta domyślna wartość z profilu społeczności."
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "Adres IPv6 jest wyliczany automatycznie."
-
-msgid "The protocol to use for internet connectivity."
-msgstr "Protokół używany do łączenia z internetem."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Jest to unikalny adres w sieci mesh (np. 10.1.1.1) i musi być zarejestrowany "
-"w lokalnej społeczności."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"To ustawi nowy wirtualny interfejs bezprzewodowy w trybie punktu dostępowego "
-"(AP)."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Ten kreator pomoże Ci w konfiguracji routera do działania z kratową siecią "
-"typu Freifunk lub innej podobnej wspólnotowej sieci bezprzewodowej."
-
-msgid "Unknown Error"
-msgstr "Nieznany błąd"
-
-msgid "Username"
-msgstr "Nazwa użytkownika"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Wirtualny punkt dostępowy (VAP)"
-
-msgid "Wizard"
-msgstr "Kreator"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Twoje urządzenie i okoliczne węzły muszą używać tego samego kanału."
-
-msgid "dhcp"
-msgstr "DHCP"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "static"
-msgstr "stały"
-
-msgid "Configure this interface."
-msgstr "Skonfiguruj ten interfejs."
-
-msgid "recommended"
-msgstr "zalecane"
-
-msgid "Basic settings"
-msgstr "Podstawowe ustawienia"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Podstawowe ustawienia są niekompletne. Idź do"
-
-msgid "Error"
-msgstr "Błąd"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-"Nie możesz użyć tego kreatora, ponieważ brakuje części niezbędnych danych."
-
-msgid "and fill out all required fields."
-msgstr "i wypełnij wszystkie wymagane pola."
diff --git a/po/pl/firewall.po b/po/pl/firewall.po
deleted file mode 100644
index 41458c8..0000000
--- a/po/pl/firewall.po
+++ /dev/null
@@ -1,616 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2013-01-06 12:43+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr "%s w %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s z %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s w %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(Nienazwany wpis)"
-
-msgid "(Unnamed Rule)"
-msgstr "(Nienazwana reguła)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(Nienazwany SNAT)"
-
-msgid "-- Please choose --"
-msgstr "-- Proszę wybrać --"
-
-msgid "-- custom --"
-msgstr "-- własne --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> pakiet. na <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-"<var>%d</var> pakiet. na <var>%s</var>, popsutych <var>%d</var> pakiet."
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> i ograniczone do %s"
-
-msgid "Action"
-msgstr "Działanie"
-
-msgid "Add"
-msgstr "Dodaj"
-
-msgid "Add and edit..."
-msgstr "Dodaj i edytuj..."
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Zezwól na przekazywanie z <em>source zones</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Zezwól na przekazywanie do <em>destination zones</em>:"
-
-msgid "Any"
-msgstr "Każdy"
-
-msgid "Covered networks"
-msgstr "Objęte sieci"
-
-msgid "Custom Rules"
-msgstr "Własne reguły"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Własne reguły pozwalają na arbitralne wykonanie poleceń iptables, które nie "
-"są objęte składnią zapory. Polecenia wykonywane są po każdym restarcie "
-"zapory, zaraz po załadowaniu zestawu reguł domyślnych."
-
-msgid "Destination IP address"
-msgstr "Docelowy adres IP"
-
-msgid "Destination address"
-msgstr "Adres docelowy"
-
-msgid "Destination port"
-msgstr "Port docelowy"
-
-msgid "Destination zone"
-msgstr "Strefa docelowa"
-
-msgid "Do not rewrite"
-msgstr "Nie przepisuj"
-
-msgid "Drop invalid packets"
-msgstr "Porzuć wadliwe pakiety"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "Enable NAT Loopback"
-msgstr "Włącz NAT Loopback"
-
-msgid "Enable SYN-flood protection"
-msgstr "Włącz ochronę przed atakiem SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr "Włącz logowanie na tej strefy"
-
-msgid "External IP address"
-msgstr "Zewnętrzne adresy IP"
-
-msgid "External port"
-msgstr "Port zewnętrzny"
-
-msgid "External zone"
-msgstr "Strefa zewnętrzna"
-
-msgid "Extra arguments"
-msgstr "Dodatkowe argumenty"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/zones.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-msgid "Firewall"
-msgstr "Zapora"
-
-msgid "Firewall - Custom Rules"
-msgstr "Zapora - Reguły własne"
-
-msgid "Firewall - Port Forwards"
-msgstr "Zapora - Przekazywanie portów"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Zapora - Reguły ruchu"
-
-msgid "Firewall - Zone Settings"
-msgstr "Zapora - Ustawienia strefy"
-
-msgid "Force connection tracking"
-msgstr "Wymuś śledzenie połączeń"
-
-msgid "Forward"
-msgstr "Przekazuj"
-
-msgid "Forward to"
-msgstr "Przekazuj do"
-
-msgid "From %s in %s"
-msgstr "Z %s w %s"
-
-msgid "From %s in %s with source %s"
-msgstr "Z %s w %s ze źródłem %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "Z %s w %s ze źródłem %s i %s"
-
-msgid "General Settings"
-msgstr "Ustawienia ogólne"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 i IPv6"
-
-msgid "IPv4 only"
-msgstr "Tylko IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "Tylko IPv6"
-
-msgid "Input"
-msgstr "Ruch przychodzący"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Przekazywanie pomiędzy strefami"
-
-msgid "Internal IP address"
-msgstr "Wewnętrzny adres IP"
-
-msgid "Internal port"
-msgstr "Wewnętrzny port"
-
-msgid "Internal zone"
-msgstr "Strefa wewnętrzna"
-
-msgid "Limit log messages"
-msgstr "Ograniczenie logowania"
-
-msgid "MSS clamping"
-msgstr "Dostosuj MSS"
-
-msgid "Masquerading"
-msgstr "Maskarada"
-
-msgid "Match"
-msgstr "Dopasuj"
-
-msgid "Match ICMP type"
-msgstr "Dopasuj typ ICMP"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-"Dopasuj przekazywany ruch do danego docelowego portu lub zakresu portów"
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Dopasuj ruch przychodzący do danego portu docelowego lub zakresu portów na "
-"tym hoście"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Dopasuj przychodzący ruch pochodzący z danego portu źródłowego lub zakresu "
-"portów na hoście klienta."
-
-msgid "Name"
-msgstr "Nazwa"
-
-msgid "New SNAT rule"
-msgstr "Nowa reguła SNAT"
-
-msgid "New forward rule"
-msgstr "Nowa reguła przekazywania (forward)"
-
-msgid "New input rule"
-msgstr "Nowa reguła wejściowa (input)"
-
-msgid "New port forward"
-msgstr "Nowe przekierowanie portu"
-
-msgid "New source NAT"
-msgstr "Nowy NAT źródłowy"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "Dopasuj tylko przychodzący ruch skierowany do danego adresu IP."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Dopasuj tylko ruch z tych adresów MAC."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr "Dopasuj tylko ruch przychodzący z tego adresu IP lub zakresu adresów."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Dopasuj tylko ruch przychodzący z podanego portu źródłowego lub zakresu "
-"portów na hoście klienta"
-
-msgid "Open ports on router"
-msgstr "Otwarte porty na routerze"
-
-msgid "Other..."
-msgstr "Inne..."
-
-msgid "Output"
-msgstr "Wyjście (Output)"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-"Przekazuje dodatkowe argumenty do iptables. Zachowaj szczególną ostrożność!"
-
-msgid "Port Forwards"
-msgstr "Przekierowania portów"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"Przekierowanie portów pozwala komputerom z internetu na połączenia z "
-"komputerami z sieci LAN."
-
-msgid "Protocol"
-msgstr "Protokół"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Przekieruj ruch przychodzący na podany port do wskazanego hosta w sieci "
-"wewnętrznej"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Przekieruj ruch przychodzący do wskazanego hosta w sieci wewnętrznej"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Ogranicz maskaradę do wskazanych sieci docelowych"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Ogranicz maskaradę do wskazanych sieci żródłowych"
-
-# Wstawiłem rodzinę gdyż gdzieś wcześniej było tak opisane ale klasa pasuje mi tu bardziej
-msgid "Restrict to address family"
-msgstr "Ogranicz do rodziny adresów"
-
-# Dosłownie przetłumaczone, nie bardzo wiem czy chodzi o czynność przepisywania pakietu przez usługę czy to jakieś ogólne sformułowanie...
-msgid "Rewrite matched traffic to the given address."
-msgstr "Przepisz dopasowany ruch do wskazanych adresów."
-
-# Jak wyżej chodzi o przepisanie pakietu przez usługę?
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Przepisz dopasowany ruch do danego portu żródłowego. Można zostawić puste "
-"aby przepisać tylko adres IP"
-
-msgid "Rewrite to source %s"
-msgstr "Przepisz do źródła %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "Przepisz do źródła %s, %s"
-
-msgid "SNAT IP address"
-msgstr "Adres IP SNAT"
-
-msgid "SNAT port"
-msgstr "Port SNAT"
-
-msgid "Source IP address"
-msgstr "Źródłowy adres IP"
-
-msgid "Source MAC address"
-msgstr "Źródłowy adres MAC"
-
-msgid "Source NAT"
-msgstr "NAT żródłowy"
-
-# http://www.digipedia.pl/def/doc/id/677604507/name/SNAT/
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"SNAT używany jest wtedy, gdy zmieniane są adresy pakietów połączenia "
-"wychodzącego, czyli pakiety żródłowe. Wykonywany jest zawsze po routowaniu "
-"(POSTROUTING), a więc w chwili, gdy pakiety są gotowe opuścić host. "
-"IPmasquerading jest formą SNAT."
-
-msgid "Source address"
-msgstr "Adres źródłowy"
-
-msgid "Source port"
-msgstr "Port źródłowy"
-
-msgid "Source zone"
-msgstr "Strefa źródłowa"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"Firewall tworzy strefy z Twoich interfejsów sieciowych, aby kontrolować ruch "
-"sieciowy."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"Opcje poniżej kontrolują politykę przekazywania pomiędzy tą strefą (%s) a "
-"innymi strefami. <em>Strefy docelowe</em> obejmują przekazywany ruch "
-"<strong>pochodzący z %q</strong>. <em>Strefy źródłowe</em> match forwarded "
-"traffic from other zones <strong>skierowane do %q</strong>. Reguła "
-"przekazywania jest <em>jednokierunkowa</em>, np. przekazywanie z sieci LAN "
-"do WAN <em>nie</em> implikuje pozwolenia na przekazywanie z sieci WAN do LAN."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"Ta strona pozwala zmienić zaawansowane ustawienia przekierowania portów. W "
-"większości przypadków nie ma potrzeby zmieniać tych ustawień."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"Ta strona pozwala zmienić zaawansowane ustawienia reguły ruchu sieciowego, "
-"takie jak pasujące źródło i hosty docelowe."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Ta sekcja definiuje ustawienia ogólne %q. Opcje <em>\"wejście\"</em> i <em>"
-"\"wyjście\"</em> określają domyślną politykę dla ruchu przychodzącego i "
-"wychodzącego w tej strefie, podczas gdy <em>\"przekazywanie\"</em> opisuje "
-"politykę ruchu przekazywanego pomiędzy różnymi sieciami wewnątrz strefy. "
-"<em>Objęte sieci</em> określają dostępne sieci będące członkami tej strefy."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "Do %s w %s na <var>tym urządzeniu</var>"
-
-msgid "To %s in %s"
-msgstr "Do %s w %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "Do %s na <var>tym urządzeniu</var>"
-
-msgid "To %s, %s in %s"
-msgstr "Do %s, %s w %s"
-
-msgid "To source IP"
-msgstr "Do źródłowego IP"
-
-msgid "To source port"
-msgstr "Do źródłowego portu"
-
-msgid "Traffic Rules"
-msgstr "Reguły ruchu sieciowego"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"Reguły ruchu sieciowego definiują politykę dla pakietów przechodzących "
-"między strefami, na przykład aby odrzucać ruch między konkretnymi hostami "
-"albo otworzyć porty WAN routera."
-
-msgid "Via %s"
-msgstr "Przez %s"
-
-msgid "Via %s at %s"
-msgstr "Przez %s w %s"
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Możesz określić kilka wybierając \"-- własne --\" i wpisując protokoły "
-"rozdzielone spacją."
-
-msgid "Zone %q"
-msgstr "Strefa %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Strefa ⇒ Przekazywanie"
-
-msgid "Zones"
-msgstr "Strefy"
-
-msgid "accept"
-msgstr "akceptuj"
-
-msgid "any"
-msgstr "dowolny"
-
-msgid "any host"
-msgstr "dowolny host"
-
-msgid "any router IP"
-msgstr "dowolne IP routera"
-
-msgid "any zone"
-msgstr "dowolna strefa"
-
-msgid "don't track"
-msgstr "nie śledź"
-
-msgid "drop"
-msgstr "porzucaj"
-
-msgid "reject"
-msgstr "odrzucaj"
-
-#~ msgid "Destination"
-#~ msgstr "Miejsce przeznaczenia"
-
-#~ msgid "Family"
-#~ msgstr "Rodzina"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "Przekazuj do %s w %s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "Przekazuj d0 %s, %s w %s"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Źródło"
-
-#~ msgid "To %s"
-#~ msgstr "Do %s"
-
-#~ msgid "Via"
-#~ msgstr "przez"
-
-#~ msgid "Accept forward"
-#~ msgstr "Akceptuj przekazywanie"
-
-#~ msgid "Accept input"
-#~ msgstr "Akceptuj wejście"
-
-#~ msgid "Disable"
-#~ msgstr "Wyłącz"
-
-#~ msgid "Discard forward"
-#~ msgstr "Odrzuć przekazywanie"
-
-#~ msgid "Discard input"
-#~ msgstr "Odrzuć wejście"
-
-#~ msgid "Do not track forward"
-#~ msgstr "Nie śledź przekazywania"
-
-#~ msgid "Do not track input"
-#~ msgstr "Nie śledź wejścia"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "Zakres IP"
-
-#~ msgid "IPs"
-#~ msgstr "Numery IP"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MACs"
-#~ msgstr "Adresy MAC"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "Reguła jest wyłączona"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "Reguła jest włączona"
-
-#~ msgid "day"
-#~ msgstr "dzień"
-
-#~ msgid "port"
-#~ msgstr "port"
-
-#~ msgid "ports"
-#~ msgstr "porty"
-
-#~ msgid "(optional)"
-#~ msgstr "(opcjonalne)"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Wewnętrzny port (opcjonalnie)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Opcje zaawansowane"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/trule.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# msgid "Name"
-# msgstr ""
-# msgid "(optional)"
-# msgstr ""
-# msgid "Protocol"
-# msgstr ""
-# msgid "Source port"
-# msgstr ""
-# msgid "Destination port"
-# msgstr ""
-# msgid "Action"
-# msgstr ""
-# msgid "drop"
-# msgstr ""
-# msgid "accept"
-# msgstr ""
-# msgid "reject"
-# msgstr ""
-#~ msgid "Advanced Rules"
-#~ msgstr "Reguły zaawansowane"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Reguły zaawansowane pozwalają dostosować zaporę do Twoich potrzeb. Tylko "
-#~ "nowe połączenia zostaną nimi objęte. Pakiety należące do połączeń już "
-#~ "otwarte są automatycznie przepuszczane przez zaporę."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Reguły własne (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Urządzenie"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "Dla DNAT, dopasuj ruch przychodzący kierowane na podany adres IP. Dla "
-#~ "SNAT zmienić adres źródłowy na podany adres."
diff --git a/po/pl/freifunk-policyrouting.po b/po/pl/freifunk-policyrouting.po
deleted file mode 100644
index bcb4492..0000000
--- a/po/pl/freifunk-policyrouting.po
+++ /dev/null
@@ -1,69 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-24 07:01+0200\n"
-"PO-Revision-Date: 2012-08-24 08:02+0200\n"
-"Last-Translator: goodgod261 <goodgod261@wp.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-"Cały ruch sieciowy z interfejsów należących do tych stref będzie wysyłany "
-"przez bramę w sieci mesh."
-
-msgid "Enable Policy Routing"
-msgstr "Włącz politykę trasowania (routingu)"
-
-msgid "Fallback to mesh"
-msgstr "Fallback do mesh"
-
-msgid "Firewall zones"
-msgstr "Strefy firewalla"
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-"Jeśli nie otrzymano domyślnej trasy z sieci mesh, ruch sieciowy należący do "
-"wybranej strefy firewalla jest trasowany przez Twoje połączenie z internetem "
-"jako fallback. Jeśli tego nie chcesz i zamiast tego chciałbyś blokować taki "
-"ruch sieciowy, powinieneś zaznaczyć tę opcję."
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-"Jeśli Twoja własna brama nie jest dostępna, wykonaj fallback do domyślnej "
-"bramy sieci mesh."
-
-msgid "Policy Routing"
-msgstr "Polityka trasowania (routingu)"
-
-msgid "Strict Filtering"
-msgstr "Ścisłe filtrowanie"
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
-"Te strony mogą zostać użyte do ustawienia polityki trasowania (routingu) dla "
-"wybranych stref firewalla. Jest to użyteczne jeśli chcesz używać swojego "
-"połączenia z internetem sam i nie chcesz dzielić się nim z innymi (stąd "
-"alternatywna nazwa \"tryb ego\"). Twój własny ruch sieciowy jest wysyłany "
-"przez Twoje połączenie, zaś ruch pochodzący z sieci mesh będzie używać innej "
-"bramy w sieci."
diff --git a/po/pl/freifunk.po b/po/pl/freifunk.po
deleted file mode 100644
index facfb03..0000000
--- a/po/pl/freifunk.po
+++ /dev/null
@@ -1,416 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-18 23:27+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr "Ustawienia Podstawowe"
-
-msgid "Basic settings"
-msgstr "Ustawienia podstawowe"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Niekompletne ustawienia podstawowe. Proszę uzupełnić"
-
-msgid "Basic system settings"
-msgstr "Podstawowe ustawienia systemu"
-
-msgid "Bitrate"
-msgstr "Bitrate"
-
-msgid "Channel"
-msgstr "Kanał"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr "Automatycznie sprawdź i uaktualnij wersję firmware`u"
-
-msgid "Client network size"
-msgstr "Rozmiar sieci klientów"
-
-msgid "Community"
-msgstr "Społeczność"
-
-msgid "Community profile"
-msgstr "Profil w społeczności"
-
-msgid "Community settings"
-msgstr "Ustawienia społeczności"
-
-msgid "Confirm Upgrade"
-msgstr "Potwierdź uaktualnienie"
-
-msgid "Contact"
-msgstr "Dane kontaktowe"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr "Dane kontaktowe są niekompletne. Proszę uzupełnij je"
-
-msgid "Coordinates"
-msgstr "Współrzędne"
-
-msgid "Country code"
-msgstr "Prefiks kraju"
-
-msgid "Default routes"
-msgstr "Domyślne trasy (routes)"
-
-msgid "Disable default content"
-msgstr "Wyłącz domyślną zawartość"
-
-# Nie przetłumaczymy tego lepiej.
-msgid "Diversity is enabled for device"
-msgstr "Różnorodność jest włączona dla urządzenia"
-
-msgid "E-Mail"
-msgstr "E-Mail"
-
-msgid "ESSID"
-msgstr "Nazwa sieci (ESSID)"
-
-msgid "Edit index page"
-msgstr "Edytuj stronę główną"
-
-msgid "Enable IPv6"
-msgstr "Włącz IPv6"
-
-msgid "Error"
-msgstr "Błąd"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "Znajdź swoje współrzędne w OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "Freifunk"
-
-msgid "Freifunk Overview"
-msgstr "Przegląd sieci Freifunk"
-
-msgid "Freifunk Remote Update"
-msgstr "Zdalna aktualizacja Freifunk"
-
-msgid "Gateway"
-msgstr "Brama"
-
-msgid "Go to"
-msgstr "Przejdź do"
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Cześć ! Witamy w sieci "
-
-msgid "Hide OpenStreetMap"
-msgstr "Ukryj OpenStreetMap"
-
-msgid "Homepage"
-msgstr "Strona domowa"
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid "IPv6 Config"
-msgstr "Konfiguracja IPv6"
-
-msgid "IPv6 Prefix"
-msgstr "Prefiks IPv6"
-
-msgid "IPv6 network in CIDR notation."
-msgstr "Sieć IPv6 w notacji CIDR"
-
-msgid "If selected then the default content element is not shown."
-msgstr "Jeśli zaznaczone domyślna zawartość nie jest widoczna"
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Jeśli jesteś zainteresowany projektem kontaktuj się z lokalna społecznością "
-"Freifunk"
-
-msgid "Index Page"
-msgstr "Strona początkowa"
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"Dostęp do internetu zależy od warunków technicznych i organizacyjnych, i "
-"dlatego może nie działać."
-
-msgid "It is operated by"
-msgstr "Jest zarządzany przez"
-
-msgid "Keep configuration"
-msgstr "Zachowaj konfigurację"
-
-msgid "Latitude"
-msgstr "Szerokość"
-
-msgid "Legend"
-msgstr "Legenda"
-
-msgid "Load"
-msgstr "Obciążenie"
-
-msgid "Local Time"
-msgstr "Czas Lokalny"
-
-# Może ktoś ma lepsze słowo?
-msgid "Location"
-msgstr "Lokacja"
-
-msgid "Longitude"
-msgstr "Długość"
-
-msgid "Map"
-msgstr "Mapa"
-
-msgid "Map Error"
-msgstr "Błąd Mapy"
-
-msgid "Memory"
-msgstr "Pamięć"
-
-# Dosłownie prefiks kraty
-msgid "Mesh prefix"
-msgstr "Prefiks komórki"
-
-msgid "Metric"
-msgstr "Metryka"
-
-msgid "Mode"
-msgstr "Tryb"
-
-msgid "Network"
-msgstr "Sieć"
-
-msgid "Network for client DHCP addresses"
-msgstr "Sieć dla adresów klienta DHCP"
-
-msgid "Nickname"
-msgstr "Twoja ksywka"
-
-msgid "No default routes known."
-msgstr "Nie są znane żadne domyślne ścieżki routingu."
-
-msgid "Notice"
-msgstr "Uwaga"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr "Zarządca"
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr "Przegląd"
-
-msgid "Package libiwinfo required!"
-msgstr "Wymagany pakiet libiwinfo !"
-
-msgid "Phone"
-msgstr "Telefon"
-
-msgid "Please fill in your contact details below."
-msgstr "Proszę uzupełnij dane kontaktowe poniżej."
-
-msgid "Please set your contact information"
-msgstr "Proszę uzupełnić swoje dane kontaktowe"
-
-msgid "Power"
-msgstr "Moc"
-
-msgid "Processor"
-msgstr "Procesor"
-
-msgid "Profile"
-msgstr "Profil"
-
-msgid "Profile (Expert)"
-msgstr "Profil (tryb eksperta)"
-
-msgid "Realname"
-msgstr "Imię i Nazwisko (prawdziwe)"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-"Proszę zaznaczyć swoją lokację na mapie. Mapa jest pokazywana tylko jeśli "
-"masz dostęp do internetu."
-
-msgid "Show OpenStreetMap"
-msgstr "Pokaż OpenStreetMap"
-
-msgid "Show on map"
-msgstr "Pokaż na mapie"
-
-msgid "Signal"
-msgstr "Sygnał"
-
-msgid "Splash"
-msgstr "Splash"
-
-msgid "Start Upgrade"
-msgstr "Zacznij aktualizację"
-
-msgid "Statistics"
-msgstr "Statystyki"
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr "System"
-
-msgid "TX"
-msgstr "TX"
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Pakiet <em>libiwinfo</em> nie jest zainstalowany. Musisz go zainstalować, "
-"aby konfiguracja sieci bezprzewodowej mogła być uaktywniona!"
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-"Usługa OLSRd nie jest skonfigurowana do pozyskiwania nazwy z sieci.<br /> "
-"Proszę się upewnić, że plugin nameservice jest poprawnie skonfigurowany, "
-"oraz opcja użycia pliku <em>latlon_file</em> jest zaznaczona."
-
-msgid "The installed firmware is the most recent version."
-msgstr "Zainstalowany firmware jest aktualny."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-"Są to podstawowe ustawienia dla twojej lokalnej bezprzewodowej społeczności. "
-"Te ustawienia określają domyślne wartości dla kreatora i NIE MAJĄ wpływu na "
-"aktualną konfigurację routera."
-
-msgid "These are the settings of your local community."
-msgstr "To są ustawienia twojej lokalnej społeczności (community)."
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-"Te strony pomogą ci skonfigurować twój router do sieci Freifunk, lub innej "
-"sieci społecznościowej ."
-
-msgid "This is the access point"
-msgstr "To jest punk dostępowy (AP)"
-
-msgid "Update Settings"
-msgstr "Uaktualnij ustawienia"
-
-msgid "Update available!"
-msgstr "Aktualizacja dostępna!!!"
-
-msgid "Uptime"
-msgstr "Aktualizacja"
-
-msgid "Verify downloaded images"
-msgstr "Sprawdź pobrane obrazy"
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Jesteśmy inicjatywą na rzecz ustanowienia wolnej, niezależnej i otwartej "
-"bezprzewodowej siatki kratowej."
-
-msgid "Wireless Overview"
-msgstr "Przegląd Ustawień WiFi"
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-"Można wyświetlić dodatkową zawartość na publicznej stronie indeksu "
-"wstawiając poprawny XHTML do formularza poniżej.<br />Nagłówki powinny być "
-"zamknięte tagami &lt;h2&gt; i &lt;/h2&gt;."
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-"Możesz znaleźć więcej informacji o naszej globalnej inicjatywie Freifunk na"
-
-msgid "You can manually edit the selected community profile here."
-msgstr "Możesz ręcznie edytować wybrany profil społeczności tutaj"
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-"Aby edytować profil musisz go najpierw zaznaczyć. Zaznacz profil aby "
-"kontynuować"
-
-msgid "and fill out all required fields."
-msgstr "i wypełnij wszystkie wymagane pola."
-
-msgid "buffered"
-msgstr "buforowany"
-
-msgid "cached"
-msgstr "cachowany"
-
-msgid "e.g."
-msgstr "np."
-
-msgid "free"
-msgstr "darmowy"
-
-msgid "to disable it."
-msgstr "aby wyłączyć"
-
-msgid "used"
-msgstr "używany"
-
-msgid "wireless settings"
-msgstr "ustawienia sieci bezprzewodowej"
diff --git a/po/pl/hd_idle.po b/po/pl/hd_idle.po
deleted file mode 100644
index e66e3a9..0000000
--- a/po/pl/hd_idle.po
+++ /dev/null
@@ -1,51 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2011-06-03 16:09+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Disk"
-msgstr "Dysk"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "Enable debug"
-msgstr "Włącz tryb debugowania"
-
-msgid "Idle-time"
-msgstr "Czas bezczynności"
-
-msgid "Idle-time unit"
-msgstr "Jednostka czasu bezczynności"
-
-msgid "Settings"
-msgstr "Ustawienia"
-
-# Hours
-msgid "h"
-msgstr "godz."
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle jest narzędziem do zwalniania obrotów zewnętrznych dysków po "
-"określonym czasie bezczynności."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
diff --git a/po/pl/meshwizard.po b/po/pl/meshwizard.po
deleted file mode 100644
index c0937c0..0000000
--- a/po/pl/meshwizard.po
+++ /dev/null
@@ -1,141 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-19 21:15+0200\n"
-"PO-Revision-Date: 2012-09-03 20:52+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "Kanał"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Zaznacz, aby zabezpieczyć sieć lokalną przed innymi węzłami lub klientami "
-"sieci"
-
-msgid "Cleanup config"
-msgstr "Wyczyść konfigurację"
-
-msgid "Configure this interface"
-msgstr "Skonfiguruj ten interfejs"
-
-msgid "DHCP IP range"
-msgstr "Pula adresów DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP automatycznie przypisze adresy IP klientom"
-
-msgid "Enable DHCP"
-msgstr "Włącz DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Ustawienia ogólne"
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-"Jeśli ta opcja jest zaznaczona to stara konfiguracja jest usuwana przed "
-"zapisaniem nowych opcji."
-
-msgid "Interfaces"
-msgstr "Interfejsy"
-
-msgid "Mesh IP address"
-msgstr "Adres Mesh IP"
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr "Kreator Mesh"
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr "Chroń LAN"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Zaznacz tę opcję aby inni użytkownicy mogli używać twojego połączenia do "
-"korzystania z internetu"
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr "Współdziel swoje połączenie internetowe"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Zakres adresów IP, z którego klientom są przypisywane adresy IP (np. "
-"10.1.2.1/28). Jeżeli jest to zakres wewnątrz twojej sieci mesh, wówczas "
-"zostanie rozgłoszony jako HNA. Każdy inny zakres będzie używać NAT. Jeżeli "
-"pozostanie pusty, wówczas zostanie użyty domyślny profil społeczności."
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr "Podany adres IP nie należy do zakresu sieci mesh"
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Jest to unikalny adres w sieci mesh (np. 10.1.1.1) i musi być zarejestrowana "
-"w lokalnej społeczności."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Ta opcja skonfiguruje nowy wirtualny interfejs bezprzewodowy w trybie Access "
-"Point`a"
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Ten kreator pomoże skonfigurować router do korzystania z Freifunk lub "
-"podobnej społecznej sieci bezprzewodowej (darmowe WiFi)"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Access Point Wirtualny (VAP)"
-
-msgid "Wizard"
-msgstr "Kreator"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Twój router i sąsiedzkie węzły sieci używają tego samego kanału."
-
-msgid "recommended"
-msgstr "zalecane"
diff --git a/po/pl/minidlna.po b/po/pl/minidlna.po
deleted file mode 100644
index b4a8a6f..0000000
--- a/po/pl/minidlna.po
+++ /dev/null
@@ -1,189 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-24 07:53+0200\n"
-"Last-Translator: goodgod261 <goodgod261@wp.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-msgid "Album art names:"
-msgstr "Nazwy okładek albumów:"
-
-msgid "Announced model number:"
-msgstr "Rozgłaszany model:"
-
-msgid "Announced serial number:"
-msgstr "Rozgłaszany numer seryjny:"
-
-msgid "Browse directory"
-msgstr "Przeglądaj folder"
-
-msgid "Collecting data..."
-msgstr "Zbieranie informacji..."
-
-msgid "Database directory:"
-msgstr "Katalog bazy danych:"
-
-msgid "Enable TIVO:"
-msgstr "Włącz TIVO:"
-
-msgid "Enable inotify:"
-msgstr "Włącz inotify:"
-
-msgid "Enable:"
-msgstr "Włącz:"
-
-msgid "Friendly name:"
-msgstr "Przyjazna nazwa:"
-
-msgid "General Settings"
-msgstr "Ustawienia ogólne"
-
-msgid "Interfaces:"
-msgstr "Interfejsy:"
-
-msgid "Log directory:"
-msgstr "Katalog dzienników (logów):"
-
-msgid "Media directories:"
-msgstr "Katalog mediów:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNA jest oprogramowaniem serwerowym mającym na celu pełną zgodność z "
-"klientami DLNA/UPnP-AV."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr "Model, który demon miniDLNA zgłosi klientom w swoim opisie XML."
-
-msgid "Music"
-msgstr "Muzyka"
-
-msgid "Network interfaces to serve."
-msgstr "Interfejsy sieciowe do obsługiwania."
-
-msgid "Notify interval in seconds."
-msgstr "Interwał powiadamiania w sekundach."
-
-msgid "Notify interval:"
-msgstr "Interwał powiadamiania."
-
-msgid "Pictures"
-msgstr "Obrazy"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "Port dla ruchu HTTP (opisy, SOAP, transfer mediów)."
-
-msgid "Port:"
-msgstr "Port:"
-
-msgid "Presentation URL:"
-msgstr "URL prezentacyjny:"
-
-msgid "Root container:"
-msgstr "Kontener główny (root):"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Numer seryjny, który demon miniDLNA zgłosi klientom w swoim opisie XML."
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr "Ustaw to, jeśli chcesz wybrać własną nazwę pokazującą się w klientach."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Ustaw to, jeśli chcesz podać folder, w którym miniDLNA powinien przechowywać "
-"bazę danych i cache okładek albumów."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-"Ustaw to, jeśli chcesz podać folder, w którym miniDLNA powinien przechowywać "
-"dzienniki (logi)."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"Ustaw to, aby włączyć monitorowanie inotify, by automatycznie wykrywać nowe "
-"pliki."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"Ustaw to, aby włączyć wsparcie dla streamingu plików .jpg i .mp3 do TiVo "
-"obsługującego HMO."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Ustaw to, aby ściśle przestrzegać standardów DLNA. Pozwoli to na "
-"zmniejszanie wielkich plików JPEG po stronie serwera, co może obniżyć "
-"wydajność dostarczania plików JPEG (przynajmniej) na urządzeniach DLNA Sony."
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Ustaw tu folder, który chcesz skanować. Jeśli chcesz ograniczyć folder do "
-"konkretnego typu zawartości, możesz poprzedzić ścieżkę typem (\"A\" dla "
-"audio, \"V\" dla wideo, \"P\" dla obrazów) i przecinkiem (np media_dir=A,/"
-"mnt/media/Muzyka). Możesz podać kilka folderów."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "Podaj ścieżkę do gniazda (socketu) miniSSDPd."
-
-msgid "Standard container"
-msgstr "Standardowy kontener"
-
-msgid "Strict to DLNA standard:"
-msgstr "Ściśle trzymaj się standardów DLNA:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"Usługa miniDLNA jest aktywna, dostarczając %d utworów, %d filmów i %d "
-"obrazów."
-
-msgid "The miniDLNA service is not running."
-msgstr "Usługa miniDLNA nie jest włączona."
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-"To jest lista nazw plików do sprawdzenia podczas wyszukiwania okładki albumu."
-
-msgid "Video"
-msgstr "Wideo"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "Status miniDLNA"
-
-msgid "miniSSDP socket:"
-msgstr "Gniazdo (socket) miniSSDP:"
diff --git a/po/pl/mmc_over_gpio.po b/po/pl/mmc_over_gpio.po
deleted file mode 100644
index ff5b51b..0000000
--- a/po/pl/mmc_over_gpio.po
+++ /dev/null
@@ -1,42 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-08-26 12:23+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CLK_pin"
-msgstr "Pin CLK"
-
-msgid "CS_pin"
-msgstr "Pin CS"
-
-msgid "DI_pin"
-msgstr "Pin DI"
-
-msgid "DO_pin"
-msgstr "Pin DO"
-
-msgid "Enable"
-msgstr "Uaktywnij"
-
-msgid "MMC/SD driver configuration"
-msgstr "Konfiguracja sterownika MMC/SD"
-
-msgid "Mode"
-msgstr "Tryb"
-
-msgid "Name"
-msgstr "Nazwa"
-
-msgid "Settings"
-msgstr "Ustawienia"
diff --git a/po/pl/multiwan.po b/po/pl/multiwan.po
deleted file mode 100644
index 5904aed..0000000
--- a/po/pl/multiwan.po
+++ /dev/null
@@ -1,125 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-01 15:25+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Liczba prób przed procedurą WAN Failover (połączenie awaryjne WAN)"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Liczba prób przed procedurą WAN Recovery (przywrócenie WAN)"
-
-msgid "Auto"
-msgstr "Automatycznie"
-
-msgid "Collecting data..."
-msgstr "Zbieranie informacji..."
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Skonfiguruj zasady kierowania ruchu wychodzącego za pośrednictwem "
-"określonych łączy WAN."
-
-msgid "DNS Server(s)"
-msgstr "Serwer(y) DNS"
-
-msgid "Default Route"
-msgstr "Trasa domyślna"
-
-msgid "Destination Address"
-msgstr "Adres docelowy"
-
-msgid "Disable"
-msgstr "Wyłącz"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "Failing"
-msgstr "Niepowodzenie"
-
-msgid "Failover Traffic Destination"
-msgstr "Cel ruch dla połączenia awaryjnego"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "Monitorowane hosty przy użyciu protokołu ICMP (ping)"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-"Czas nieosiągalności monitorowanych hostów przy użyciu protokołu ICMP (ping)"
-
-msgid "Health Monitor Interval"
-msgstr "Odstęp pomiędzy próbami monitoringu"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"Monitor stanu wykrywa i koryguje zmiany sieci oraz nieudane połączenia."
-
-msgid "KO"
-msgstr "KO"
-
-msgid "Load Balancer Distribution"
-msgstr "Dystrybucja równoważenia obciążenia"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Równoważenie obciążenia (Zgodność)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Równoważenie obciążenia (Wydajność)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr "Status Multi-WAN"
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Reguły ruchu Multi-WAN"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Multi-WAN pozwala na używanie kilku łącz w celu równoważenia obciążenia lub "
-"omijania awarii."
-
-msgid "None"
-msgstr "Żaden"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "Ports"
-msgstr "Porty"
-
-msgid "Protocol"
-msgstr "Protokół"
-
-msgid "Recovering"
-msgstr "Odzyskiwanie"
-
-msgid "Source Address"
-msgstr "Adres źródłowy"
-
-msgid "Unknown"
-msgstr "Nieznany"
-
-msgid "WAN Interfaces"
-msgstr "Interfejsy WAN"
-
-msgid "WAN Uplink"
-msgstr "Łącze WAN"
-
-msgid "all"
-msgstr "wszystkie"
diff --git a/po/pl/ntpc.po b/po/pl/ntpc.po
deleted file mode 100644
index c2cb3e8..0000000
--- a/po/pl/ntpc.po
+++ /dev/null
@@ -1,54 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2011-09-18 02:23+0200\n"
-"Last-Translator: Michał <wispwind@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Clock Adjustment"
-msgstr "Regulacja zegara"
-
-msgid "Count of time measurements"
-msgstr "Liczba pomiarów czasu"
-
-msgid "Current system time"
-msgstr "Aktualny czas systemowy"
-
-msgid "General"
-msgstr "Główne"
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid "Offset frequency"
-msgstr "Przesunięcie częstotliwości"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "Synchronizuje czas systemowy"
-
-msgid "Time Server"
-msgstr "Serwer czasu"
-
-msgid "Time Servers"
-msgstr "Serwery czasu"
-
-msgid "Time Synchronisation"
-msgstr "Synchronizacja czasu"
-
-msgid "Update interval (in seconds)"
-msgstr "Interwał aktualizacji (w sekundach)"
-
-msgid "empty = infinite"
-msgstr "puste = nieskończone"
diff --git a/po/pl/olsr.po b/po/pl/olsr.po
deleted file mode 100644
index 362ebd2..0000000
--- a/po/pl/olsr.po
+++ /dev/null
@@ -1,625 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 14:12+0200\n"
-"Last-Translator: mesiu84 <kmesek84@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Active MID announcements"
-msgstr "Aktywne ogłoszenia MID"
-
-msgid "Active OLSR nodes"
-msgstr "Aktywne węzły OLSR"
-
-msgid "Active host net announcements"
-msgstr "Aktywne ogłoszenia hostnet"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-msgid "Allow gateways with NAT"
-msgstr "Zezwól na bramy z NAT"
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr "Zezwól na wybieranie wychodzącej bramy IPv4 przez NAT"
-
-msgid "Announce uplink"
-msgstr "Ogłaszaj uplink"
-
-msgid "Announced network"
-msgstr "Ogłaszana sieć"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-"Obie wartości muszą używać zapisu dziesiętnego z kropką przed częścią "
-"dziesiętną."
-
-msgid "Broadcast address"
-msgstr "Adres rozgłoszeniowy (broadcast)"
-
-msgid "Configuration"
-msgstr "Konfiguracja"
-
-msgid "Device"
-msgstr "Urządzenie"
-
-msgid "Display"
-msgstr "Wyświetl"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Download Config"
-msgstr "Ustawienia pobierania"
-
-msgid "ETX"
-msgstr "ETX"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-"Włącz SmartGateway. Jeśli wyłączone, wszystkie inne parametry SmartGateway "
-"są ignorowane. Domyślnie jest wyłączone."
-
-msgid "Enable this interface."
-msgstr "Włącz ten interfejs."
-
-msgid "Enabled"
-msgstr "Włączone"
-
-msgid "Expected retransmission count"
-msgstr "Oczekiwana wartość retransmisji"
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-# skorzystałem z niemieckiego tłumaczenia
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-"Mechanizm Fisheye dla TCs (zaznaczone oznacza \"włączone\"). Domyślnie jest "
-"\"włączone\""
-
-msgid "Gateway"
-msgstr "Brama"
-
-msgid "General Settings"
-msgstr "Ustawienia ogólne"
-
-msgid "General settings"
-msgstr "Ustawienia ogólne"
-
-msgid "HNA"
-msgstr "HNA"
-
-msgid "HNA Announcements"
-msgstr "Ogłoszenia HNA"
-
-msgid "HNA interval"
-msgstr "Interwał HNA"
-
-msgid "HNA validity time"
-msgstr "Czas poprawności HNA"
-
-msgid "Hello"
-msgstr "Hello"
-
-msgid "Hello interval"
-msgstr "Interwał Hello"
-
-msgid "Hello validity time"
-msgstr "Czas poprawności Hello"
-
-msgid "Hna4"
-msgstr "Hna4"
-
-msgid "Hna6"
-msgstr "Hna6"
-
-msgid "Hops"
-msgstr "Skoki (hops)"
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-"Hosty w sieci OLSR mogą ogłaszać połączenia z zewnętrznymi sieciami poprzez "
-"wiadomości HNA."
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr "Adresy IP"
-
-#, fuzzy
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-"Wersja protokołu IP. Jeśli jest wybrana 6and4 wtedy instancja olsrd jest "
-"uruchomiona dla każdego protokołu"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 broadcast"
-msgstr "Rozgłaszanie IPv4"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-"Adres rozgłoszeniowy (broadcast) IPv4 dla wychodzących pakietów OLSR. "
-"Przydatnym przykładem byłoby 255.255.255.255. Domyślna wartość to \"0.0.0.0"
-"\" - jest wtedy używany adres rozgłoszeniowy interfejsu."
-
-msgid "IPv4 source"
-msgstr "Źródło IPv4"
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-"Adres źródłowy IPv4 dla wychodzących pakietów. Domyślna wartość to \"0.0.0.0"
-"\" - jest wtedy używany adres IP interfejsu."
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 multicast"
-msgstr "Multicast IPv6"
-
-# Nie mam pojęcia, jak to lepiej przetłumaczyć, ale w moich tłumaczeniach kieruję się zasadą "release early, release often".
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-"Adres multicast IPv6. Domyślna wartość to \"FF02::6D\", multicast lokalnego "
-"routera."
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-"Sieć IPv6 musi być podana w pełnej notacji, prefiks musi być w notacji CIDR."
-
-msgid "IPv6 source"
-msgstr "Źródło IPv6"
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-"Prefiks źródła IPv6. OLSRd wybierze jeden z adresów IP interfejsów, który "
-"będzie pasował do tego prefiksu. Domyślna wartość to \"0::/0\" - jest wtedy "
-"używany adres IP interfejsu."
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr "Czy węzeł korzysta z NAT do połączenia z Internetem. Domyślnie \"Tak\""
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-"Tryb interfejsu jest używany, aby zapobiec niepotrzebnemu przekazywaniu "
-"pakietów. Prawidłowe tryby to \"mesh\" i \"ether\". Domyślna wartość to "
-"\"mesh\"."
-
-msgid "Interfaces"
-msgstr "Interfejsy"
-
-# by Google :D po części
-msgid "Interfaces Defaults"
-msgstr "Standardy interfejsów"
-
-msgid "Internet protocol"
-msgstr "Protokół internetowy"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr "Znane ścieżki OLSR"
-
-msgid "LQ"
-msgstr "LQ"
-
-msgid "LQ aging"
-msgstr "Starzenie się LQ"
-
-msgid "LQ algorithm"
-msgstr "Algorytm LQ"
-
-msgid "LQ fisheye"
-msgstr "LQ-Fisheye"
-
-msgid "LQ level"
-msgstr "Poziom LQ"
-
-msgid "Last hop"
-msgstr "Ostatni skok (hop)"
-
-msgid "Legend"
-msgstr "Legenda"
-
-msgid "Library"
-msgstr "Biblioteka"
-
-#, fuzzy
-msgid "Link Quality Settings"
-msgstr "Ustawienia jakości linków"
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr "Mnożnik LinkQuality"
-
-msgid "Links per node (average)"
-msgstr "Linków na węzeł (średnio)"
-
-msgid "Links total"
-msgstr "Linków w sumie"
-
-msgid "Local interface IP"
-msgstr "IP lokalnego interfejsu"
-
-msgid "MID"
-msgstr "MID"
-
-msgid "MID interval"
-msgstr "Interwał MID"
-
-msgid "MID validity time"
-msgstr "Czas poprawności MID"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Main IP"
-msgstr "Główny IP"
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Upewnij się że OLSRd jest uruchomione, \"txtinfo\" plugin jest załadowany, "
-"skonfigurowany na porcie 2006 i akceptuje połączenia z 127.0.0.1 (localhost)"
-
-#, fuzzy
-msgid "Metric"
-msgstr "Miara"
-
-msgid "Mode"
-msgstr "Tryb"
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr "Próg NAT"
-
-msgid "NLQ"
-msgstr "NLQ"
-
-msgid "Neighbors"
-msgstr "Sąsiedzi"
-
-msgid "Neighbour IP"
-msgstr "IP sąsiadów"
-
-msgid "Neighbours"
-msgstr "Sąsiedzi"
-
-msgid "Netmask"
-msgstr "Maska sieciowa"
-
-msgid "Network"
-msgstr "Sieć"
-
-msgid "Network address"
-msgstr "Adres sieci"
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr "Węzły"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr "OLSR - ogłoszenia HNA"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - pluginy"
-
-msgid "OLSR Daemon"
-msgstr "Demon OLSR"
-
-msgid "OLSR Daemon - Interface"
-msgstr "Demon OLSR - interfejs"
-
-msgid "OLSR connections"
-msgstr "Połączenia OLSR"
-
-msgid "OLSR gateway"
-msgstr "Brama OLSR"
-
-msgid "OLSR node"
-msgstr "Węzeł OLSR"
-
-msgid "Overview"
-msgstr "Przegląd"
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Przegląd aktywnych ogłoszeń hostnet OLSR"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Przegląd nawiązanych połączeń OLSR"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Przegląd znanych węzłów OLSR"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Przegląd znanych tras do innych węzłów OLSR"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr "Przegląd interfejsów z włączonym OLSR"
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Przegląd znanych wielointerfejsowych ogłoszeń"
-
-msgid "Overview of smart gateways in this network"
-msgstr "Przegląd bram SmartGateway w tej sieci"
-
-msgid "Plugin configuration"
-msgstr "Ustawienia pluginu"
-
-msgid "Plugins"
-msgstr "Pluginy"
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Prefix"
-msgstr "Prefiks"
-
-msgid "Resolve"
-msgstr "Rozwiąż"
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr "Trasy (routes)"
-
-msgid "Secondary OLSR interfaces"
-msgstr "Zapasowy interfejs OLSR"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr "SmartGW"
-
-msgid "SmartGW announcements"
-msgstr "Ogłoszenia SmartGW"
-
-msgid "SmartGateway is not configured on this system."
-msgstr "SmartGateway jest nieskonfigurowane."
-
-msgid "Source address"
-msgstr "Adres źródłowy"
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr "Stan"
-
-msgid "Status"
-msgstr "Status"
-
-#, fuzzy
-msgid "Success rate of packages received from the neighbour"
-msgstr "Wartość poprawnie otrzymanych od sąsiada pakietów"
-
-#, fuzzy
-msgid "Success rate of packages sent to the neighbour"
-msgstr "Wartość poprawnie wysłanych pakietów do sąsiada"
-
-msgid "TC"
-msgstr "TC"
-
-msgid "TC interval"
-msgstr "Interwał TC"
-
-msgid "TC validity time"
-msgstr "Czas poprawności TC"
-
-msgid "TOS value"
-msgstr "Wartość TOS"
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr "Interfejs, który powinien oferować OLSRd."
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-"Port używany przez OLSR. Zwykle powinien pozostać na przydzielonym przez "
-"IANA porcie 698. Może mieć wartość pomiędzy 1 a 65535."
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr "Topologia"
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "Połączenie z demonem OLSR nieudane!"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Uplink uses NAT"
-msgstr "Uplink używa NAT"
-
-msgid "Use hysteresis"
-msgstr "Używaj histerezy"
-
-msgid "Version"
-msgstr "Wersja"
-
-msgid "WLAN"
-msgstr "WLAN"
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-"Uwaga: kmod-ipip nie jest zainstalowany. Bez kmod-ipip bramy SmartGateway "
-"nie będą działać. Proszę go zainstalować."
-
-msgid "Weight"
-msgstr "Waga"
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-"Kiedy istnieje wiele połączeń między hostami, waga interfejsów określa, "
-"którego z nich użyć. Zwykle jest liczona automatycznie przez olsrd opartym "
-"na charakterystyce interfejsu, ale tu możesz podać stałą wartość. Olsrd "
-"wybierze połączenie z najniższą wartością.<br /><b>Uwaga:</b> Waga "
-"interfejsu jest używana tylko kiedy LinkQualityLevel jest ustawione na 0. "
-"Dla dowolnej innej wartości LinkQualityLevel, zamiast tego jest używana "
-"wartość ETX."
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr "Gotowość"
diff --git a/po/pl/openvpn.po b/po/pl/openvpn.po
deleted file mode 100644
index 428d17c..0000000
--- a/po/pl/openvpn.po
+++ /dev/null
@@ -1,559 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-18 23:07+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', lub 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Zaakceptuj opcje narzucone przez serwer"
-
-msgid "Add"
-msgstr "Dodaj"
-
-msgid "Add route after establishing connection"
-msgstr "Dodaj trasę po nawiązaniu połączenia"
-
-msgid "Additional authentication over TLS"
-msgstr "Dodatkowe uwierzytelnianie poprzez TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Zezwól na łączność klient-klient"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Zezwól na łączenie wielu klientów z tym samym certyfikatem."
-
-msgid "Allow only one session"
-msgstr "Zezwól tylko na jedną sesję"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Zezwól na zmianę IP lub portu odległemu hostowi."
-
-msgid "Allowed maximum of connected clients"
-msgstr "Maksymalna dozwolona liczba klientów"
-
-msgid "Allowed maximum of internal"
-msgstr "Maksymalna dozwolona liczba wewnętrznych"
-
-msgid "Allowed maximum of new connections"
-msgstr "Maksymalna dozwolona liczba nowych połączeń"
-
-msgid "Append log to file"
-msgstr "Dopisz log do pliku"
-
-msgid "Authenticate using username/password"
-msgstr "Autoryzacja z użyciem loginu oraz hasła"
-
-msgid "Automatically redirect default route"
-msgstr "Automatycznie przekieruj domyślną trasę"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Ponieżej znajduje się lista skonfigurowanych procesów OpenVPN wraz z ich "
-"aktualnymi stanami."
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "Zatrzymaj skrypt przed wyłączeniem interfejsu TUN/TAP"
-
-msgid "Certificate authority"
-msgstr "Urząd certyfikacji"
-
-msgid "Change process priority"
-msgstr "Zmień priorytet procesu"
-
-msgid "Change to directory before initialization"
-msgstr "Przejdź do katalogu przed inicjalizacją"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Sprawdź certyfikat peera na obecność w CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Zmień root (chroot) na katalog po inicjalizacji"
-
-msgid "Client is disabled"
-msgstr "Klient jest wyłączony"
-
-msgid "Configuration category"
-msgstr "Kategoria konfiguracji"
-
-msgid "Configure client mode"
-msgstr "Konfiguruj tryb klienta"
-
-msgid "Configure server bridge"
-msgstr "Konfiguruj serwer w trybie mostu"
-
-msgid "Configure server mode"
-msgstr "Konfiguruj serwer"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Połącz poprzez SOCKS5 proxy"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "Połącz ze zdalnym hostem poprzez HTTP proxy"
-
-msgid "Connection retry interval"
-msgstr "Interwał powtarzania połączeń"
-
-msgid "Cryptography"
-msgstr "Kryptografia"
-
-msgid "Daemonize after initialization"
-msgstr "Przejdź w tryb demona po inicjalizacji"
-
-msgid "Delay n seconds after connection"
-msgstr "Opóźnienie n sekund po nawiązaniu połączenia"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "Opóźnienie otwarcia interfejsu tun/tap i wykonania skryptu"
-
-msgid "Diffie Hellman parameters"
-msgstr "Parametry Diffie Hellman"
-
-msgid "Directory for custom client config files"
-msgstr "Katalog na pliki konfiguracyjne"
-
-msgid "Disable Paging"
-msgstr "Wyłącz stronicowanie"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Wyłącz wektor inicjalizacji szyfru"
-
-msgid "Disable options consistency check"
-msgstr "Wyłącz sprawdzanie poprawności ustawień"
-
-msgid "Disable replay protection"
-msgstr "Wyłącz ochronę odpowiedzi"
-
-msgid "Do not bind to local address and port"
-msgstr "Nie związuj z lokalnym adresem i portem"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Nie uruchamiaj obecnie ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "Nie dodawaj tras (routes) automatycznie"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "Nie cacheuj haseł --askpass lub --auth-user-pass"
-
-msgid "Don't inherit global push options"
-msgstr "Nie dziedzicz globalnej opcji push"
-
-msgid "Don't log timestamps"
-msgstr "Nie zapisuj czasu w logu"
-
-msgid "Don't re-read key on restart"
-msgstr "Nie wczytuj ponownie klucza podczas restartu"
-
-msgid "Don't require client certificate"
-msgstr "Nie wymagaj certyfikatu od klienta"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Nie używaj adaptatywnej kompresji lzo"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "Nie ostrzegaj przed niespójnością w ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Zapisuj parametry w logu"
-
-msgid "Empirically measure MTU"
-msgstr "Mierz MTU empirycznie"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Włącz sprzętowe przyspieszenie OpenSSL"
-
-msgid "Enable Path MTU discovery"
-msgstr "Włącz wykrywanie \"Path MTU\""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Włącz tryb szyfrowania statycznym kluczem (non-TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Włącz TLS i przyjmij rolę klienta"
-
-msgid "Enable TLS and assume server role"
-msgstr "Włącz TLS i przyjmij rolę serwera"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Włącz wewnętrzną fragmentację datagramu"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Włącz interfejs zarządzalny na <em>IP</em> <em>port</em>"
-
-msgid "Enabled"
-msgstr "Włączone"
-
-msgid "Encryption cipher for packets"
-msgstr "Szyfrowanie dla pakietów"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Wykonaj komendę powłoki po dodaniu tras"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Wykonaj komendę powłoki po zmianie zdalnego IP"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-"Wykonane w trybie serwera na nowych połączeniach klienta, gdy klient jest "
-"nadal niezaufany"
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-"Wykonane w trybie serwera, gdy adres IPv4, trasa lub adres MAC są dodane do "
-"wewnętrznej tablicy routingu w OpenVPN"
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Wyjdź przy niepowodzeniu negocjacji TLS"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Uzyskaj hasło PEM z kontroli tty przed demonizacją"
-
-msgid "HMAC authentication for packets"
-msgstr "Autoryzacja HMAC dla pakietów"
-
-msgid "Handling of authentication failures"
-msgstr "Postępowanie z błędami uwierzytelniania"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-"Dyrektywa Helper w celu uproszczenia wyrażenie --ping i --ping-restart w "
-"konfiguracjach w trybie serwera"
-
-msgid "If hostname resolve fails, retry"
-msgstr "Jeżeli ustanowienie nazwy hosta nie powiedzie się, spróbuj ponownie"
-
-msgid "Instance \"%s\""
-msgstr "Instancja \"%s\""
-
-msgid "Invalid"
-msgstr "Nieprawidłowe"
-
-msgid "Keep local IP address on restart"
-msgstr "Zachowaj lokalny adres IP przy restarcie"
-
-msgid "Keep remote IP address on restart"
-msgstr "Zachowaj zdalny adres IP przy restarcie"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Utrzymaj urządzenie tun/tap po restarcie jako otwarte"
-
-msgid "Key transition window"
-msgstr "Okno zmiany klucza"
-
-msgid "Limit repeated log messages"
-msgstr "Limit powtarzających się wiadomości w logu"
-
-msgid "Local certificate"
-msgstr "Certyfikat lokalny"
-
-msgid "Local host name or ip address"
-msgstr "Lokalna nazwa hosta lub adres IP"
-
-msgid "Local private key"
-msgstr "Lokalny klucz prywatny"
-
-msgid "Major mode"
-msgstr "Tryb główny"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Urządzenie tun zgodne z IPv6"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Maksymalna liczba wychodzących pakietów TCP w kolejce"
-
-msgid "Networking"
-msgstr "Ustawienia sieciowe"
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Liczba przydzielonych buforów nadawczych"
-
-msgid "Number of lines for log file history"
-msgstr "Liczba linii w pliku dziennika historii"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Akceptuj tylko połączenia z podanej nazwy X509"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "Wykonaj procedurę \"ping timeout\" tylko jeżeli trasy istnieją"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Instancje OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Optymalizuj wpisy TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Wysyłaj do syslog'a i nie demonizuj"
-
-msgid "Overview"
-msgstr "Przegląd"
-
-msgid "PKCS#12 file containing keys"
-msgstr "Plik PKCS#12 zawierający klucze"
-
-msgid "Pass environment variables to script"
-msgstr "Przekaż zmienne środowiskowe do skryptu"
-
-msgid "Persist replay-protection state"
-msgstr "Utrzymaj status ochrony odpowiedzi"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Pinguj zdalnego co n sekund przez port TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-"Poziom zasad odnoszących się do używania zewnętrznych programów i skryptów"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol"
-msgstr "Protokół"
-
-msgid "Proxy timeout in seconds"
-msgstr "Czas bezczynności proxy w sekundach"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Wyślij opcje ifconfig do zdalnego"
-
-msgid "Push options to peer"
-msgstr "Wyślij opcje do peera"
-
-msgid "Query management channel for private key"
-msgstr "Kanał zarządzania zapytaniami dla klucza prywatnego"
-
-msgid "Randomly choose remote server"
-msgstr "Losowo wybierz serwer zdalny"
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Przemapuj SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Nazwa lub IP zdalnego hosta"
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr "Start/Stop"
-
-msgid "Started"
-msgstr "Uruchomiono"
-
-msgid "Status file format version"
-msgstr "Wersja formatu pliku statusu"
-
-msgid "Switch to advanced configuration »"
-msgstr "Konfiguracja zaawansowana »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Numer portu TCP/UDP zarówno dla lokalnego jak i zdalnego"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Numer portu TCP/UDP dla lokalnego (domyślnie=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Numer portu TCP/UDP dla zdalnego (domyślnie=1194)"
-
-msgid "TLS cipher"
-msgstr "Kodowanie TLS"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "Przepuszczanie TOS (dotyczy tylko IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Katalog tymczasowy dla pliku zwrotnego połączenia klienta"
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr "Typ użytego urządzenia"
-
-msgid "Use fast LZO compression"
-msgstr "Użyj szybkiej kompresji LZO"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Użyj indywidualnego adresu zamiast podsieci /30"
-
-msgid "Use protocol"
-msgstr "Użyj protokołu"
-
-msgid "Use tun/tap device node"
-msgstr "Użyj węzła urządzenia tun/tap"
-
-msgid "Use username as common name"
-msgstr "Użyj nazwy użytkownika jako nazwy wspólnej"
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr "Zapisz log do pliku"
-
-msgid "Write process ID to file"
-msgstr "Zapisz numer ID procesu do pliku"
-
-msgid "Write status to file every n seconds"
-msgstr "Zapisz status do pliku co n sekund"
-
-msgid "no"
-msgstr "nie"
-
-msgid "tun/tap device"
-msgstr "urządzenie tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr "czas bezczynności tun/tap"
-
-msgid "yes (%i)"
-msgstr "tak (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Konfiguracja podstawowa"
diff --git a/po/pl/p2pblock.po b/po/pl/p2pblock.po
deleted file mode 100644
index 9222a08..0000000
--- a/po/pl/p2pblock.po
+++ /dev/null
@@ -1,46 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-03-29 10:53+0200\n"
-"PO-Revision-Date: 2012-03-29 10:55+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Block Time"
-msgstr "Czas blokowania"
-
-msgid "Enable P2P-Block"
-msgstr "Włącz P2P-Block"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Protokoły Layer7"
-
-msgid "P2P-Block"
-msgstr "P2P-Block"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"P2P-Block jest mechanizmem który blokuje rozmaite protokoły peer-to-peer dla "
-"klientów spoza dozwolonej listy."
-
-msgid "Portrange"
-msgstr "Zakres portów"
-
-msgid "Whitelisted IPs"
-msgstr "Dozwolone adresy IP"
-
-msgid "seconds"
-msgstr "sekund"
diff --git a/po/pl/p910nd.po b/po/pl/p910nd.po
deleted file mode 100644
index 54c634a..0000000
--- a/po/pl/p910nd.po
+++ /dev/null
@@ -1,50 +0,0 @@
-#  p910nd.pot
-#  generated from ./applications/luci-p910nd/luasrc/i18n/p910nd.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-06 12:57+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Bidirectional mode"
-msgstr "Tryb dwukierunkowy"
-
-msgid "Device"
-msgstr "Urządzenie"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Po pierwsze, musisz zainstalować pakiety obsługujące USB (kmod-usb-printer) "
-"lub LPT (kmod-lp)."
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Settings"
-msgstr "Ustawienia"
-
-msgid "TCP listener port."
-msgstr "Port nasłuchu TCP"
-
-msgid "enable"
-msgstr "Włączony"
-
-# W sambie usługa też się nazywa "network shares", więc nie ma specjalnie potrzeby używania nazwy własnej demona "p910nd".
-msgid "p910nd - Printer server"
-msgstr "Serwer wydruku"
-
-#~ msgid "port_help"
-#~ msgstr "port_help"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr "p910nd nasłuchuje na porcie 910X, np. 9100 dla pierwszej drukarki."
diff --git a/po/pl/pbx-voicemail.po b/po/pl/pbx-voicemail.po
deleted file mode 100644
index fed8168..0000000
--- a/po/pl/pbx-voicemail.po
+++ /dev/null
@@ -1,98 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-24 09:58+0200\n"
-"Last-Translator: goodgod261 <goodgod261@wp.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr "Adres e-mail do odbierania poczty głosowej"
-
-msgid "Enable Voicemail"
-msgstr "Włącz pocztę głosową"
-
-msgid "Global Voicemail Setup"
-msgstr "Ustawienia globalnej poczty głosowej"
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr "Nie"
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr "Tak"
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-"Możesz też zachować kopie nagrań poczty głosowej na urządzeniu, na którym "
-"działa PBX. Ścieżka określona tutaj zostanie utworzona, jeśli nie istnieje. "
-"Pamiętaj o ograniczonym miejscu na urządzeniach takich jak routery i włącz "
-"tę opcję tylko jeśli wiesz co robisz."
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
-"Twoje prawdziwe hasło SMTP nie jest pokazane dla Twojej ochrony. Zostanie "
-"zmienione tylko jeśli zmienisz wartość w tym polu."
diff --git a/po/pl/pbx.po b/po/pl/pbx.po
deleted file mode 100644
index f84173e..0000000
--- a/po/pl/pbx.po
+++ /dev/null
@@ -1,473 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-08 13:18+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-msgid "Available"
-msgstr "Dostępny"
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr "Unikaj znaków innych niż alfanumeryczne, spacja, przecinek i kropka."
-
-msgid "Away"
-msgstr "Oddalony"
-
-msgid "Blacklisted Numbers"
-msgstr "Numery na czarnej liście"
-
-msgid "Call Routing"
-msgstr "Przekierowanie połączeń"
-
-# Chodzi tu o numery, przez które dzwoni się, aby obniżyć koszta połączeń zagranicznych. Jeśli ktoś ma pomysł na lepsze tłumaczenie, proszę zmienić. W sieci nie znalazłem.
-msgid "Call-through Numbers"
-msgstr "Numery pośredniczące"
-
-msgid "Copy-paste large lists of numbers here."
-msgstr "Wklej tu wielkie listy numerów."
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr "Nie przeszkadzać"
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr "Domena/adres IP/dynamiczna domena"
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr "Dynamiczna czarna lista numerów"
-
-msgid "Email"
-msgstr "E-mail"
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr "Włącz połączenia przychodzące (rejestruj przez SIP)"
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr "Włącz połączenia przychodzące (zobacz status poniżej)"
-
-msgid "Enable Outgoing Calls"
-msgstr "Włącz połączenia wychodzące"
-
-msgid "Enabled"
-msgstr "Włączone"
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-"Podaj numery telefonów, które powinny być automatycznie odrzucane. "
-"Prawdopodobnie powinieneś pominąć numer kierunkowy kraju i zera z przodu, "
-"ale samemu to przetestuj, aby upewnić się, że blokowanie działa prawidłowo "
-"dla Twojego położenia."
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-"Podaj to IP (lub parę IP:port) w ustawieniach serwera/rejestratora urządzeń "
-"SIP których będziesz używać WYŁĄCZNIE lokalnie i nigdy z zewnątrz."
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-"Podaj tę nazwę hosta (lub parę nazwa hosta:port) w ustawieniach serwera/"
-"rejestratora urządzeń SIP których będziesz używać z zewnątrz (będą też "
-"działać lokalnie)."
-
-msgid "External SIP Port"
-msgstr "Zewnętrzny port SIP"
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-"Dla każdego użytkownika z prawem wykonywania połączeń wychodzących możesz "
-"ograniczyć których operatorów mogą używać do tych połączeń. Domyślnie każdy "
-"użytkownik może używać dowolnego operatora. Użytkownik musi mieć prawo "
-"wykonywania połączeń wychodzących ustawione na stronie \"Konta użytkowników"
-"\", aby pojawić się na poniższej liście. Podaj operatorów VoIP w formacie "
-"nazwa.użytkownika@jakaś.nazwa.hosta, tak jak są wypisani w \"Połączeniach "
-"wychodzących\" powyżej. Łatwiej jest skopiować powyższych operatorów. "
-"Nieprawidłowe wpisy, włącznie z operatorami bez prawa do połączeń "
-"wychodzących, będą odrzucani bez komunikatów. Wpisy mogą być rozdzielone "
-"spacjami albo podane po jednym w wierszu."
-
-msgid "Full Name"
-msgstr "Pełne imię i nazwisko"
-
-msgid "General Settings"
-msgstr "Ustawienia ogólne"
-
-msgid "Google Accounts"
-msgstr "Konta Google"
-
-msgid "Google Talk Status"
-msgstr "Status Google Talk"
-
-msgid "Google Talk Status Message"
-msgstr "Opis Google Talk"
-
-msgid "Google Voice/Talk Accounts"
-msgstr "Konta Google Voice/Talk"
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/pl/polipo.po b/po/pl/polipo.po
deleted file mode 100644
index 698edc9..0000000
--- a/po/pl/polipo.po
+++ /dev/null
@@ -1,231 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-01-06 22:57+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-msgid "Allowed clients"
-msgstr "Dozwolone klienty"
-
-msgid "Always use system DNS resolver"
-msgstr "Zawsze używaj systemowej obsługi DNS"
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Obsługiwana podstawowa autoryzacja HTTP. Podaj nazwę użytkownika i hasło w "
-"formie username:hasło."
-
-msgid "Configuration"
-msgstr "Konfiguracja"
-
-msgid "DNS and Query Settings"
-msgstr "Ustawienia DNS i zapytań"
-
-msgid "DNS server address"
-msgstr "Adres serwera DNS"
-
-msgid "Delete cache files time"
-msgstr "Czas usuwania plików cache"
-
-msgid "Disk cache location"
-msgstr "Położenie cache na dysku"
-
-msgid "Do not query IPv6"
-msgstr "Nie wykonuj zapytań IPv6"
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Włącz, aby cache (proxy) był współdzielony przez wielu użytkowników."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Rozmiar pierwszego segmentu PMM (w bajtach)"
-
-msgid "General Settings"
-msgstr "Ustawienia ogólne"
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Ile pamięci RAM powinien używać Polipo jako cache."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "Rozmiar cache w RAM (w bajtach)"
-
-msgid "Listen address"
-msgstr "Nasłuchuj adres"
-
-msgid "Listen port"
-msgstr "Nasłuchuj port"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Miejsce, w którym Polipo będzie przechowywać pliki cache na stałe. Użycie "
-"zewnętrznego magazynu jest zalecane. Cache może się poważnie zwiększyć. "
-"Pozostaw puste, aby wyłączyć cache na dysku."
-
-msgid "Log file location"
-msgstr "Katalog logów"
-
-msgid "Log to syslog"
-msgstr "Loguj do logu systemowego (syslog)"
-
-msgid "Logging and RAM"
-msgstr "Dziennik i RAM"
-
-msgid "Never use system DNS resolver"
-msgstr "Nigdy nie używaj systemowej obsługi DNS"
-
-msgid "On-Disk Cache"
-msgstr "Cache na dysku"
-
-msgid "PMM segments size (in bytes)"
-msgstr "Rozmiar segmentu PMM (w bajtach)"
-
-msgid "Parent Proxy"
-msgstr "Nadrzędne proxy"
-
-msgid "Parent proxy address"
-msgstr "Adres nadrzędnego proxy"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Adres nadrzędnego proxy (podany jako host:port), do którego Polipo będzie "
-"przekierowywać żądania."
-
-msgid "Parent proxy authentication"
-msgstr "Autoryzacja nadrzędnego proxy"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr "Status Polipo"
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipo jest małym i szybkim web proxy z obsługą cache."
-
-# "Multipleksowanie Biedaka" brzmi fajniej, ale nie chcę mieć usuniętego konta.
-msgid "Poor Man's Multiplexing"
-msgstr "Poor Man's Multiplexing"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"Poor Man's Multiplexing (PMM) to technika symulująca multipleksowanie "
-"poprzez żądanie instancji w wielu segmentach. Próbuje obniżyć opóźnienia "
-"spowodowane wadami protokołu HTTP. UWAGA: niektóre strony mogą nie działać "
-"przy włączonym PMM!"
-
-msgid "Port on which Polipo will listen"
-msgstr "Port, na którym Polipo będzie nasłuchiwać."
-
-msgid "Proxy"
-msgstr "Proxy"
-
-msgid "Query DNS by hostname"
-msgstr "Zapytanie DNS po nazwie hosta"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr "Odpytuj DNS bezpośrednio, powracając do resolvera systemu"
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-"Odpytuj DNS bezpośrednio, dla nieznanych hostów powróć do resolvera systemu"
-
-msgid "Query DNS for IPv6"
-msgstr "Zapytanie DNS dla IPv6"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr "Zapytanie DNS dla IPv4 i IPv6, preferowane IPv4"
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr "Zapytanie DNS dla IPv4 i IPv6, preferowane IPv6"
-
-msgid "Query only IPv6"
-msgstr "Zapytanie tylko IPv6"
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Ustaw adres serwera DNS do użycia, jeśli chcesz aby Polipo używał innego "
-"DNS`a niż system hosta."
-
-msgid "Shared cache"
-msgstr "Cache udostępniany"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Rozmiar PIERWSZEGO segmentu PMM. Jeśli nie zdefiniowano, jego domyślny "
-"rozmiar to dwu-krotność rozmiaru segmentu PMM."
-
-msgid "Size to which cached files should be truncated"
-msgstr "Rozmiar do którego pliki cache`owane mają być przycięte"
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Syslog facility"
-msgstr "Funkcja (facility) loga systemowego"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"Interfejs na którym słucha proxy Polipo. Aby słuchać na wszystkich "
-"interfejsach użyj 0.0.0.0 lub :: dla IPv6"
-
-msgid "Time after which cached files will be deleted"
-msgstr "Czas po którym pliki cache będą skasowane"
-
-msgid "Time after which cached files will be truncated"
-msgstr "Czas po którym pliki cache będą przycięte"
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-"Aby włączyć PMM, rozmiar segmentu PMM musi mieć ustawioną wartość dodatnią."
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Rozmiar przycinanych plików w cache(w bajtach)"
-
-msgid "Truncate cache files time"
-msgstr "Czas przycinanych plików w cache"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"Użycie zewnętrznego nośnika danych wysoce zalecane, plik loga jest "
-"zapisywany okresowo i może urosnąć znacząco."
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-"Jeśli adres nasłuchu ustawiony jest na 0.0.0.0 lub ::(IPv6), musisz "
-"wyszczególnić klientów mających pozwolenie na połączenie. Format to adres IP "
-"lub adres sieci (192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-
-msgid "enable"
-msgstr "włączone"
diff --git a/po/pl/qos.po b/po/pl/qos.po
deleted file mode 100644
index 2462869..0000000
--- a/po/pl/qos.po
+++ /dev/null
@@ -1,108 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-08-31 18:14+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "Oblicz narzut"
-
-msgid "Classification Rules"
-msgstr "Reguły klasyfikacji"
-
-msgid "Classification group"
-msgstr "Grupa klasyfikacji"
-
-msgid "Destination host"
-msgstr "Host docelowy"
-
-msgid "Downlink"
-msgstr "Ruch przychodzący"
-
-msgid "Download speed (kbit/s)"
-msgstr "Prędkość pobierania (kbit/s)"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "Half-duplex"
-msgstr "Półdupleks"
-
-msgid "Interfaces"
-msgstr "Interfejsy"
-
-msgid "Internet Connection"
-msgstr "Połączenie Internetowe"
-
-msgid "Number of bytes"
-msgstr "Ilość bajtów"
-
-msgid "Ports"
-msgstr "Porty"
-
-msgid "Protocol"
-msgstr "Protokół"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "Jakość usługi (ang. Quality of Service)"
-
-msgid "Service"
-msgstr "Usługa"
-
-msgid "Source host"
-msgstr "Host źródłowy"
-
-msgid "Target"
-msgstr "Cel"
-
-msgid "Uplink"
-msgstr "Ruch wychodzący"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Prędkość wysyłania (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Z <abbr title=\"Quality of Service\">QoS</abbr> można ustalać priorytet "
-"ruchu sieciowego na podstawie adresów, portów lub usług."
-
-msgid "all"
-msgstr "wszystko"
-
-# Jeśli w ogóle jest to gdzieś używane, to i w angielskiej wersji jest błąd. W takiej sytuacji należy udawać idiotę.
-msgid "allf"
-msgstr "allf"
-
-msgid "default"
-msgstr "domyślna"
-
-msgid "express"
-msgstr "ekspresowy"
-
-msgid "low"
-msgstr "niski"
-
-msgid "normal"
-msgstr "normalny"
-
-msgid "priority"
-msgstr "priorytetowy"
-
-# Patrz - allf.
-msgid "qos_connbytes"
-msgstr "qos_connbytes"
diff --git a/po/pl/radvd.po b/po/pl/radvd.po
deleted file mode 100644
index 7e69d68..0000000
--- a/po/pl/radvd.po
+++ /dev/null
@@ -1,372 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-25 02:47+0200\n"
-"Last-Translator: goodgod261 <goodgod261@wp.pl>\n"
-"Language-Team: German\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-# Na polskiej Wikipedii jest artykuł "6to4", więc chyba ok.
-msgid "6to4 interface"
-msgstr "Interfejs 6to4"
-
-msgid "Address"
-msgstr "Adres"
-
-msgid "Addresses"
-msgstr "Adresy"
-
-msgid "Advanced"
-msgstr "Zaawansowane"
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/pl/rrdtool.po b/po/pl/rrdtool.po
deleted file mode 100644
index bf451ec..0000000
--- a/po/pl/rrdtool.po
+++ /dev/null
@@ -1,360 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-31 11:06+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Sieć bezprzewodowa - Poziom Szumów"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Poziom szumów"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Moc sygnału"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Sieć bezprzewodowa - Jakość sygnału"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Jakość sygnału"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: ICMP - Czasy odpowiedzi"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Firewall - Przetworzone pakiety"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "Pakiety/s"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Łańcuch \"%di\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - Transfer przez %pi"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "Bajty/s"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Bajtów (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - Pakiety na %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "Pakiety/s"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Przetworzone (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Odrzucone (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Błędy (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - Multicasty na %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "Pakiety/s"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Pakiety"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - Kolizje na %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "Kolizje/s"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Kolizje"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - Błędy na %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "Błędy/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Procesy"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Procesy/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Proces %pi - użyty czas Procesora"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffies"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "system"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "użytkownik"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Proces %pi - wątki i procesy"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "Liczba"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Proces %pi - błędy stronnicowania"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Błędy stronnicowania"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "błędy stronnicowania"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Proces %pi - rozmiar pamięci wirtualnej"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bajtów"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "pamięć wirtualna"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Użycie Procesora #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Transfer na %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "Bajtów/s"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Pakietów na %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "Pakietów/s"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: TCP-połączeń na port %pi"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "Połączeń/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Użycie przestrzeni dyskowej na %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Bajtów"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: Przerwania"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "Problem(y)"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: Obciążenie Systemu"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Obciążenie"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 min"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 min"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 min"
diff --git a/po/pl/samba.po b/po/pl/samba.po
deleted file mode 100644
index 7482622..0000000
--- a/po/pl/samba.po
+++ /dev/null
@@ -1,83 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-08-26 09:51+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Zezwalaj Gościom"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Użytkownicy systemu mogą dostać się do swoich katalogów domowych za "
-"pośrednictwem udziałów sieciowych."
-
-msgid "Allowed users"
-msgstr "Użytkownicy z prawem dostępu"
-
-msgid "Create mask"
-msgstr "Utwórz maskę"
-
-msgid "Description"
-msgstr "Opis"
-
-msgid "Directory mask"
-msgstr "Maska katalogu"
-
-msgid "Edit Template"
-msgstr "Edytuj szablon"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Edytuj szablon, który jest używany do generowania konfiguracji samby."
-
-msgid "General Settings"
-msgstr "Ustawienia ogólne"
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid "Mask for new directories"
-msgstr "Maska dla nowych katalogów"
-
-msgid "Mask for new files"
-msgstr "Maska dla nowych plików"
-
-msgid "Name"
-msgstr "Nazwa"
-
-msgid "Network Shares"
-msgstr "Udziały sieciowe"
-
-msgid "Path"
-msgstr "Ścieżka"
-
-msgid "Read-only"
-msgstr "Tylko do odczytu"
-
-msgid "Share home-directories"
-msgstr "Udostępniaj katalogi domowe"
-
-msgid "Shared Directories"
-msgstr "Udostępniane katalogi"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"To jest zawartość pliku '/etc/samba/smb.conf.template\", na podstawie "
-"którego zostanie wygenerowana konfiguracja samby. Wartości otoczone symbolem "
-"kreski pionowej ('|') nie powinny być zmieniane. Wartości ich zostaną "
-"pobrane z zakładki \"Ustawienia ogólne\"."
-
-msgid "Workgroup"
-msgstr "Grupa robocza"
diff --git a/po/pl/splash.po b/po/pl/splash.po
deleted file mode 100644
index e4f36ff..0000000
--- a/po/pl/splash.po
+++ /dev/null
@@ -1,359 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-24 06:17+0200\n"
-"PO-Revision-Date: 2013-01-06 13:10+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Accept"
-msgstr "Akceptuj"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-"Dostęp do internetu może być mimo wszystko możliwy, ponieważ niektórzy "
-"aktywiści tego projektu dzielą się swoimi prywatnymi łączami. Te kilka łącz "
-"jest rozdzielanych między wszystkich użytkowników. Oznacza to, że transfer "
-"jest ograniczony. Z tego powodu prosimy, abyś nie:"
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "Aktywni klienci"
-
-msgid "Allowed hosts/subnets"
-msgstr "Dozwolone hosty/podsieci"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"Limit transferu dla klientów jest aktywny tylko jeśli aktywne są oba limity "
-"- pobierania i wysyłania. Ustaw 0, aby całkowicie wyłączyć to ograniczenie. "
-"Nie dotyczy ono klientów z białej listy."
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-"Zostań aktywnym członkiem tej społeczności i pomóż, zakładając własny węzeł"
-
-msgid "Blacklist"
-msgstr "Czarna lista"
-
-msgid "Blocked"
-msgstr "Zablokowane"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-# z niemieckiego tłumaczenia
-#, fuzzy
-msgid "Clearance time"
-msgstr "Czas wyzwalacza"
-
-msgid "Client-Splash"
-msgstr "Splash kliencki"
-
-# nie ma słowa "autentykacja" - to brzydka kalka z angielskiego. 
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-"Klient Splash - sposób uwierzytelniania użytkowników dla sieci WiFi oparty o "
-"wyświetlanie komunikatów."
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr "Prędkość pobierania dla klienta jest ograniczona do wartości (kb/s)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr "Klienci, którzy zaakceptowali okienko mogą korzystać z sieci przez."
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr "Prędkość pobierania dla klienta jest ograniczona do wartości (kb/s)"
-
-msgid "Contact"
-msgstr "Kontakt"
-
-msgid "Decline"
-msgstr "Odrzuć"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr "Możesz zasposorować ten projekt aby utrzymać go przy życiu"
-
-msgid "Download limit"
-msgstr "Limit ściągania"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr "Strefa firewall"
-
-msgid "General"
-msgstr "Ogólne"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-"Hosty i sieci wylistowane tutaj są wyłączone z konieczności klikania "
-"komunikatu, zawsze mogą połączyć się do sieci."
-
-msgid "IP Address"
-msgstr "Adres IP"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-"Jeśli używasz własnych urządzeń WiFi korzystaj z innych kanałów niż nasze."
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr "Jeśli korzystasz z tej sieci regularnie prosimy cię o wsparcie."
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interfejs"
-
-msgid "Interfaces that are used for Splash."
-msgstr "Interfejsy wykorzystywane przez komunikat (Splash)"
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-"KB/s (Download/Upload). Będziesz w stanie usunąć ten limit jeśli aktywnie "
-"przyłączysz się do tego projektu."
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "Adres MAC"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "Adresy MAC z tej listy są zablokowane."
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-"Biała lista adresów MAC, wszyscy z tej listy nie muszą akceptować komunikatu "
-"(Splash) i nie mają ograniczanego połączenia"
-
-msgid "Netmask"
-msgstr "Maska sieci"
-
-msgid "Network"
-msgstr "Sieć"
-
-msgid "No clients connected"
-msgstr "Nie ma podłączonych klientów"
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-"Zwróć uwagę na to że nie jesteśmy providerem internetowym ale "
-"eksperymentalną siecią"
-
-msgid "Policy"
-msgstr "Zasady"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Zachowaj"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-"Reguły komunikatu (Splash) są integrowane z ustawieniami firewalla tej strefy"
-
-msgid "Splashtext"
-msgstr "Tekst komunikatu (Splash)"
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "Pozostały czas"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-"Aby poznać z jakiego powodu zostałeś zablokowany lub prosić o ponowne "
-"odblokowanie możesz spróbować skontaktować się z właścicielem tego Access "
-"Point'a:"
-
-msgid "Traffic in/out"
-msgstr "Ruch do/od"
-
-msgid "Upload limit"
-msgstr "Limit wysyłania"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr "Witamy"
-
-msgid "Whitelist"
-msgstr "Biała lista"
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr "Jesteś teraz podłączony do darmowej sieci"
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-"Możesz umieścić tutaj własny tekst wyświetlany dla klientów.<br /> "
-"Dopuszczalne jest używanie następujących znaków: ###COMMUNITY###, "
-"###COMMUNITY_URL###, ###CONTACTURL###, ###LEASETIME###, ###LIMIT### and "
-"###ACCEPT###."
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-"Twój dostęp do sieci został zablokowany, najprawdopodobniej dlatego że "
-"wykonałeś jedną z akcji zabronionych przez nasze reguły."
-
-msgid "Your bandwidth is limited to"
-msgstr "Twój transfer jest ograniczony do"
-
-msgid "blacklisted"
-msgstr "czarna lista"
-
-msgid "expired"
-msgstr "wygasło"
-
-msgid "optional when using host addresses"
-msgstr "opcjonalne w przypadku używania adresów hostów"
-
-msgid "perform any kind of illegal activities"
-msgstr "wykonywał którąkolwiek z zakazanych akcji"
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr "tymczasowo zablokowane"
-
-msgid "unknown"
-msgstr "nieznane"
-
-# Zgaduję, że to jest wyświetlane tuż po komunikacie nr 2, więc tak powinno pasować.
-msgid "use filesharing applications on this network"
-msgstr "używał programów do dzielenia się plikami w tej sieci"
-
-# j.w.
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr "marnował transfer na niepotrzebne pobieranie plików i strumieni"
-
-msgid "whitelisted"
-msgstr "biała lista"
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "Akceptując te reguły możesz używać sieci do:"
-
-#~ msgid "Edit Splash text"
-#~ msgstr "Edytuj tekst Komunikatu (Splash)"
-
-#~ msgid "hour(s). After this time you need to accept these rules again."
-#~ msgstr "Czas po jakim musisz zaakceptować te reguły (w godzinach)"
-
-#~ msgid "the owner of this access point."
-#~ msgstr "Właściciel tego Access Point'a"
diff --git a/po/pl/statistics.po b/po/pl/statistics.po
deleted file mode 100644
index 65c383c..0000000
--- a/po/pl/statistics.po
+++ /dev/null
@@ -1,674 +0,0 @@
-#  statistics.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/statistics.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 15:20+0200\n"
-"Last-Translator: mesiu84 <kmesek84@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Action (target)"
-msgstr "Akcja (cel)"
-
-msgid "Add command for reading values"
-msgstr "Dodaj polecenie do odczytywania wartości"
-
-msgid "Add matching rule"
-msgstr "Dodaj pasującą regułę"
-
-msgid "Add multiple hosts separated by space."
-msgstr "Dodaj wiele hostów rozdzielonych spacjami."
-
-msgid "Add notification command"
-msgstr "Dodaj komendę powiadamiającą"
-
-msgid "Base Directory"
-msgstr "Główny katalog"
-
-msgid "Basic monitoring"
-msgstr "Podstawowy monitoring"
-
-msgid "CPU Plugin Configuration"
-msgstr "Konfiguracja CPU"
-
-msgid "CSV Output"
-msgstr "Wyjście CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Konfiguracja CSV"
-
-#, fuzzy
-msgid "Cache collected data for"
-msgstr "Cache dla"
-
-msgid "Cache flush interval"
-msgstr "Odstępy czyszczenia cache"
-
-msgid "Chain"
-msgstr "Łańcuch"
-
-msgid "CollectLinks"
-msgstr "CollectLinks"
-
-msgid "CollectRoutes"
-msgstr "CollectRoutes"
-
-msgid "CollectTopology"
-msgstr "CollectTopology"
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Ustawienia Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd to mały deomon do zbieranie danych z różnych źródeł za pomocą "
-"różnych wtyczek. Na tej stronie można zmienić ogólne ustawienia demona "
-"collectd."
-
-msgid "Conntrack"
-msgstr "Conntrack"
-
-msgid "Conntrack Plugin Configuration"
-msgstr "Konfiguracja wtyczki Conntrack"
-
-msgid "DF Plugin Configuration"
-msgstr "Konfiguracja wtyczki DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Konfiguracja wtyczki DNS"
-
-msgid "Data collection interval"
-msgstr "Odstępy zbierania danych"
-
-msgid "Datasets definition file"
-msgstr "Zdefiniowany plik ustawień"
-
-msgid "Destination ip range"
-msgstr "Zakres docelowych adresów IP"
-
-msgid "Directory for collectd plugins"
-msgstr "Katalog wtyczek collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Katalog podkonfiguracji"
-
-msgid "Disk Plugin Configuration"
-msgstr "Konfiguracja wtyczki dysk"
-
-msgid "Disk Space Usage"
-msgstr "Zużycie przestrzeni dyskowej"
-
-msgid "Disk Usage"
-msgstr "Użycie dysku"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Przedział czasu wyświetlania »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Konfiguracja wtyczki E-mail"
-
-msgid "Email"
-msgstr "E-mail"
-
-msgid "Enable this plugin"
-msgstr "Włącz tę wtyczkę"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Konfiguracja wtyczki Exec"
-
-msgid "Filter class monitoring"
-msgstr "Monitorowanie filtra klas"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr "Opróżnić cache po"
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr "Wykresy"
-
-msgid "Group"
-msgstr "Grupa"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Tutaj można zdefiniować zewnętrzne komendy, które będą włączane przez "
-"collectd, by odczytać konkretne wartości. Będą one odczytywane z stdout."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Tutaj można zdefiniować zewnętrzne komendy, które będą włączane przez "
-"collectd, kiedy zostaną osiągnięte konkretne wartości progowe. Wartości "
-"powodujące włączenie będą wysyłane do programów przez stdin."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Tutaj można zdefiniować różne kryteria według których wybierane są "
-"monitorowane reguły iptables."
-
-msgid "Host"
-msgstr "Host"
-
-msgid "Hostname"
-msgstr "Nazwa hosta"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr "Numer IP lub nazwa hosta jako wyjście txtinfo"
-
-msgid "IRQ Plugin Configuration"
-msgstr "Konfiguracja wtyczki IRQ"
-
-msgid "Ignore source addresses"
-msgstr "Ignoruj adresy źródłowe"
-
-msgid "Incoming interface"
-msgstr "Interfejs przychodzący"
-
-msgid "Interface Plugin Configuration"
-msgstr "Konfiguracja wtyczki Interfejs"
-
-msgid "Interfaces"
-msgstr "Interfejsy"
-
-msgid "Interrupts"
-msgstr "Przerwania"
-
-msgid "Interval for pings"
-msgstr "Odstępy dla pingów"
-
-msgid "Iptables Plugin Configuration"
-msgstr "Konfiguracja wtyczki iptables"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-"Pozostaw niezaznaczone do automatycznego określenia interfejsu do "
-"monitorowania."
-
-msgid "Listen host"
-msgstr "Nasłuchuj host"
-
-msgid "Listen port"
-msgstr "Nasłuchuj port"
-
-msgid "Listener interfaces"
-msgstr "Interfejsy nasłuchującego"
-
-msgid "Load Plugin Configuration"
-msgstr "Konfiguracja wtyczki Obciążenie"
-
-msgid "Maximum allowed connections"
-msgstr "Maksymalna ilość połączeń"
-
-msgid "Memory"
-msgstr "Pamięć"
-
-msgid "Memory Plugin Configuration"
-msgstr "Konfiguracja wtyczki Pamięć"
-
-msgid "Monitor all except specified"
-msgstr "Monitoruj wszystko oprócz podanych"
-
-msgid "Monitor all local listen ports"
-msgstr "Monitoruj wszystkie lokalne otwarte porty"
-
-msgid "Monitor devices"
-msgstr "Monitoruj urządzenia"
-
-msgid "Monitor disks and partitions"
-msgstr "Monitoruj dyski i partycje"
-
-msgid "Monitor filesystem types"
-msgstr "Monitoruj system plików"
-
-msgid "Monitor hosts"
-msgstr "Monitoruj hosty"
-
-msgid "Monitor interfaces"
-msgstr "Monitoruj interfejsy"
-
-msgid "Monitor interrupts"
-msgstr "Monitoruj przerwania"
-
-msgid "Monitor local ports"
-msgstr "Monitoruj porty lokalne"
-
-msgid "Monitor mount points"
-msgstr "Monitoruj punkty zamontowania"
-
-msgid "Monitor processes"
-msgstr "Monitoruj procesy"
-
-msgid "Monitor remote ports"
-msgstr "Monitoruj porty zdalne"
-
-msgid "Name of the rule"
-msgstr "Nazwa tej reguły"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Konfiguracja wtyczki Netlink"
-
-msgid "Network"
-msgstr "Sieć"
-
-msgid "Network Plugin Configuration"
-msgstr "Konfiguracja wtyczki Sieć"
-
-msgid "Network plugins"
-msgstr "Wtyczki sieciowe"
-
-msgid "Network protocol"
-msgstr "Protokoły sieciowe"
-
-msgid "Number of threads for data collection"
-msgstr "Liczba wątków do zbierania danych"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr "Konfiguracja wtyczki OLSRd"
-
-msgid "Only create average RRAs"
-msgstr "Twórz tylko średnie archiwa RRA"
-
-msgid "Options"
-msgstr "Opcje"
-
-msgid "Outgoing interface"
-msgstr "Interfejs wychodzący"
-
-msgid "Output plugins"
-msgstr "Pluginy wyjścia"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Konfiguracja wtyczki Ping"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Processes"
-msgstr "Procesy"
-
-msgid "Processes Plugin Configuration"
-msgstr "Konfiguracja wtyczki Procesy"
-
-msgid "Processes to monitor separated by space"
-msgstr "Monitorowane procesy oddzielone spacją"
-
-msgid "Processor"
-msgstr "Procesor"
-
-msgid "Qdisc monitoring"
-msgstr "Monitorowanie Qdisc"
-
-msgid "RRD XFiles Factor"
-msgstr "RRD XFiles Factor"
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Konfiguracja wtyczki RRDTool"
-
-msgid "Rows per RRA"
-msgstr "Wierszy w archiwum RRA"
-
-msgid "Script"
-msgstr "Skrypt"
-
-msgid "Seconds"
-msgstr "Sekundy"
-
-msgid "Server host"
-msgstr "Host serwer"
-
-msgid "Server port"
-msgstr "Port serwera"
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr "Zakres źródłowych adresów ip"
-
-msgid "Specifies what information to collect about links."
-msgstr "Określa jakie informacje zbierać o linkach."
-
-msgid "Specifies what information to collect about routes."
-msgstr "Określa jakie informacje zbierać o trasach."
-
-msgid "Specifies what information to collect about the global topology."
-msgstr "Określa jakie informacje zbierać o globalnej topologii."
-
-msgid "Statistics"
-msgstr "Statystyki"
-
-msgid "Storage directory"
-msgstr "Katalog przechowywania"
-
-msgid "Storage directory for the csv files"
-msgstr "Katalog przechowywania plików csv"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-"Przechowuj wartości danych jako wskaźniki zamiast wartości bezwzględnych"
-
-msgid "Stored timespans"
-msgstr "Przechowywane okresy czasu"
-
-msgid "System Load"
-msgstr "Obciążenie systemu"
-
-msgid "System plugins"
-msgstr "Wtyczki systemowe"
-
-msgid "TCP Connections"
-msgstr "Połączenia TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Konfiguracja wtyczki Połączenia TCP"
-
-msgid "TTL for network packets"
-msgstr "TTL dla pakietów sieciowych"
-
-msgid "TTL for ping packets"
-msgstr "TTL dla pakietów ping"
-
-msgid "Table"
-msgstr "Tabela"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-"Wtyczka OLSRd odczytuje informacje o sieciach mesh z wtyczki txtinfo dla "
-"OLSRd."
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr "Wtyczka Conntrack zbiera statystyki o liczbie śledzonych połączeń."
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr "Wtyczka CPU zbiera podstawowe statystyki o użyciu procesora"
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"Wtyczka CSV gromadzi zebrane dane w formacie plików csv do dalszej obróbki "
-"przez zewnętrzne programy."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"Wtyczka \"df\" zbiera statystyki dotyczące wykorzystania miejsca na różnych "
-"urządzenia, dyskach i systemach plików."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"Wtyczka \"disk\" zbiera szczegółowe informacje z poszczególnych partycji lub "
-"całych dysków."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"Wtyczka \"dns\" zbiera statystyki odnośnie ruchu DNS dla wybranych "
-"interfejsów."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr "Wtyczka \"interface\" zbiera statystyki z wybranych interfejsów."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"Wtyczka \"iptables\" monitoruje wybrane reguły firewalla i zbiera statystyki "
-"o procesach, bajtach i pakietach przypadających na daną regułę."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-"Wtyczka \"iwinfo\" zbiera statystyki o sygnale, zakłóceniach i jakości sieci "
-"WiFi."
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "Wtyczka \"load\" zbiera statystyki o ogólnych obciążeniu systemu."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-"\"wtyczka \"memory\" zbiera statystyki dotyczące wykorzystania pamięci."
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"Wtyczka \"ping\" wysyła komunikaty icmp i nasłuchuje odpowiedzi z wybranych "
-"hostów oraz mierzy czasy odpowiedzi zwrotnych dla każdego z nich."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"Statystyki bazuja na <a href=\"http://collectd.org/index.shtml\">Collectd</"
-"a> oraz wykorzystują <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD Tool</a> "
-"do generowania diagramów i wykresów z zebranych danych."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"Wtyczka \"tcpconns\" zbiera informacje o otwartych połączeniach tcp dla "
-"wybranych portów."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr "Ta sekcja określa do jakich serwerów zebrane dane zostaną wysłane."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Konfiguracja wtyczki UnixSock"
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr "Uzytkownik"
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr "WiFi"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
-
-#~ msgid "Installed network plugins:"
-#~ msgstr "Zainstalowane wtyczki sieciowe:"
-
-#~ msgid "Installed output plugins:"
-#~ msgstr "Zainstalowane wtyczki wyjścia:"
-
-#~ msgid ""
-#~ "Network plugins are used to collect information about open tcp "
-#~ "connections, interface traffic, iptables rules etc."
-#~ msgstr ""
-#~ "Wtyczki sieciowe służą do zbierania informacji o otwartych połączeniach TCP, "
-#~ "ruchu sieciowym na danym interfejsie, regułach iptables itp."
-
-#~ msgid ""
-#~ "Output plugins provide different possibilities to store collected data. "
-#~ "It is possible to enable multiple plugin at one, for example to store "
-#~ "collected data in rrd databases and to transmit the data over the network "
-#~ "to other collectd instances."
-#~ msgstr ""
-#~ "Pluginy wyjścia dostarczają różnych możliwości przechowywania zgromadzonych "
-#~ "danych. Można włączyć wiele pluginów naraz, na przykład przechowywać dane w "
-#~ "bazach danych RRD i wysyłać je do innych instancji collectd w sieci."
-
-#~ msgid ""
-#~ "System plugins collecting values about system state and ressource usage "
-#~ "on the device.:"
-#~ msgstr ""
-#~ "Wtyczki systemowe zbierają wartości o stanie systemu i użyciu zasobów "
-#~ "urządzenia.:"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "Wtyczka \"wireless\" zbiera dane o sile sygnału, zakłóceniach i jakości WiFi."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "konfiguracja wtyczki WiFi"
diff --git a/po/pl/tinyproxy.po b/po/pl/tinyproxy.po
deleted file mode 100644
index 8e3bfc7..0000000
--- a/po/pl/tinyproxy.po
+++ /dev/null
@@ -1,292 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-04 11:50+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-"<em>Przez proxy</em> kieruje żądania do danego celu przez określone "
-"\"upstream proxy\", <em>Odrzuć dostęp</em> wyłącza jakiekolwiek \"upstream "
-"proxy\" dla danego celu."
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"Dodaje nagłówek http \"X-Tinyproxy\" z adresem IP klienta do przekazywanych "
-"żądań"
-
-msgid "Allowed clients"
-msgstr "Akceptowane klienty"
-
-msgid "Allowed connect ports"
-msgstr "Akceptowane porty połączenia"
-
-msgid "Bind address"
-msgstr "zwiąż adres"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"Domyślnie do filtrowania używane są podstawowe wyrażenia POSIX. Włącz tę "
-"opcję, aby aktywować rozszerzone wyrażenia regularne."
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-"Domyślnie ciągi filtrowania traktowane są jako wrażliwe na wielkość liter. "
-"Włącz tę opcję, aby dopasowania były wrażliwe na wielkości liter."
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-"Domyślnie filtrowanie jest wykonywane w oparciu o nazwy domen. Włącz tę "
-"opcję, aby zamiast tego używać URL-i."
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"Domyślnie, reguły filtra działają jako czarna lista. Zaznacz tę opcję, aby "
-"zezwalać wyłącznie na pasujące URL-e lub nazwy domen."
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-"Może być adresem lub zakresem adresów IP, nazwą domeny lub \".\" dla "
-"dowolnego hosta bez domeny."
-
-msgid "Configuration"
-msgstr "Konfiguracja"
-
-msgid "Connection timeout"
-msgstr "Limit czasu połączenia"
-
-msgid "Default deny"
-msgstr "Domyślnie blokuj"
-
-msgid "Enable Tinyproxy server"
-msgstr "Włącz serwer Tinyproxy"
-
-msgid "Error page"
-msgstr "Strona błędu"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr "Nieudane pobieranie statystyk z URL-a:"
-
-msgid "Filter by RegExp"
-msgstr "Filtruj z użyciem rozszerzonych wyrażeń regularnych"
-
-msgid "Filter by URLs"
-msgstr "Filtruj po adresach URL"
-
-msgid "Filter case-sensitive"
-msgstr "Filtr wrażliwy na wielkość liter"
-
-msgid "Filter file"
-msgstr "Plik z filtrami"
-
-msgid "Filtering and ACLs"
-msgstr "Filtrowanie i Listy kontroli dostępu"
-
-msgid "General settings"
-msgstr "Ustawienia ogólne"
-
-msgid "Group"
-msgstr "Grupa"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr "Plik szablonu HTML używany do prezentacji statystyk"
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "Plik szablonu HTML używany do prezentacji komunikatów błędu"
-
-# Zgaduję, że to ma coś wspólnego z nagłówkami zapytań - stąd takie tłumaczenie.
-msgid "Header whitelist"
-msgstr "Biała lista nagłówków"
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-"Lista adresów IP lub zakresów, które są dopuszczone do korzystania z serwera "
-"proxy"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-"Lista dozwolonych portów dla metody CONNECT. Pojedyncza wartość \"0\" "
-"pozwala użyć wszystkich portów"
-
-msgid "Listen address"
-msgstr "Nasłuchiwany adres"
-
-msgid "Listen port"
-msgstr "Nasłuchiwany port"
-
-msgid "Log file"
-msgstr "Plik logowania"
-
-msgid "Log file to use for dumping messages"
-msgstr "Plik logowania zrzucanych wiadomości"
-
-msgid "Log level"
-msgstr "Poziom logowania"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr "Szczegółowość logowania procesów Tinyproxy"
-
-msgid "Max. clients"
-msgstr "Maks. klientów"
-
-msgid "Max. requests per server"
-msgstr "Maks. żądań na serwer"
-
-msgid "Max. spare servers"
-msgstr "Maks. uruchomionych serwerów"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr "Maksymalna dopuszczalna liczba jednocześnie podłączonych klientów"
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-"Maksymalna dopuszczalna liczba żądań na proces. Jeśli zostanie przekroczona, "
-"proces zostanie ponownie uruchomiony. Zero oznacza bez limitu."
-
-msgid "Maximum number of prepared idle processes"
-msgstr "Maksymalna liczba przygotowanych bezczynnych procesów"
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-"Maksymalna liczba sekund dla podtrzymywania otwartego nieaktywnego połączenie"
-
-msgid "Min. spare servers"
-msgstr "Min. liczba zapasowych serwerów"
-
-msgid "Minimum number of prepared idle processes"
-msgstr "Minimalna liczba przygotowanych bezczynnych procesów"
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-"Liczba bezczynnych procesów do włączenia podczas uruchamiania Tinyproxy"
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-"Plik tekstowy z URL-ami lub domenami do filtowania. Jeden wpis na linię."
-
-msgid "Policy"
-msgstr "Polityka"
-
-msgid "Privacy settings"
-msgstr "Ustawienia prywatności"
-
-msgid "Reject access"
-msgstr "Odmów dostępu"
-
-msgid "Server Settings"
-msgstr "Ustawienia serwera"
-
-msgid "Server limits"
-msgstr "Limity serwera"
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-"Określa nazwy nagłówków HTTP, które mogą zostać przesłane dalej. Pozostałe "
-"będą odrzucone. Pozostaw puste, aby wyłączyć filtrowanie nagłówków."
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr "Określa port, na którym Tinyproxy będzie oczekiwać żądań HTTP."
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr "Określa nazwę hosta używaną przez Tinyproxy w nagłówku HTTP \"Via\"."
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-"Określ adres, z którym zostanie powiązane Tinyproxy dla wychodzących "
-"przekazywanych żądań"
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr "Określa adresy, z których Tinyproxy oczekuje żądań."
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr "Określ nazwę grupy, pod jaką będzie pracował proces Tinyproxy"
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-"Określ serwer proxy typu upstream, który ma zostać użyty w przypadku dostępu "
-"do hosta docelowego. Format to <code>adres:port</code>"
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr "Określ nazwę użytkownika, pod jaką będzie pracował proces Tinyproxy"
-
-msgid "Start spare servers"
-msgstr "Uruchamiane serwery zapasowe"
-
-msgid "Statistics page"
-msgstr "Strona statystyk"
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Target host"
-msgstr "Host docelowy"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr "Status serwera Tinyproxy"
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy to mały i szybki niecacheujący serwer proxy HTTP(S)"
-
-msgid "Upstream Proxies"
-msgstr "Serwery proxy typu upstream"
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-"Reguły serwerów proxy typu upstream definiują serwery proxy, które mają "
-"zostać użyte w przypadku dostępu do określonych adresów IP lub domen."
-
-msgid "Use syslog"
-msgstr "Użyj sysloga"
-
-msgid "User"
-msgstr "Użytkownik"
-
-msgid "Via hostname"
-msgstr "Nazwa hosta via"
-
-msgid "Via proxy"
-msgstr "Proxy via"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr "Zapisuje komunikaty do sysloga zamiast pliku dziennika"
-
-msgid "X-Tinyproxy header"
-msgstr "Nagłówek X-Tinyproxy"
diff --git a/po/pl/transmission.po b/po/pl/transmission.po
deleted file mode 100644
index 1634a69..0000000
--- a/po/pl/transmission.po
+++ /dev/null
@@ -1,309 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-19 21:20+0200\n"
-"PO-Revision-Date: 2013-01-06 13:14+0200\n"
-"Last-Translator: obsy <cezary@eko.one.pl>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Alternative download speed"
-msgstr "Alternatywna prędkość pobierania"
-
-msgid "Alternative speed enabled"
-msgstr "Prędkość alternatywna włączona"
-
-msgid "Alternative speed time begin"
-msgstr "Godzina włączenia prędkości alternatywnej"
-
-msgid "Alternative speed time day"
-msgstr "Dzień prędkości alternatywnej"
-
-msgid "Alternative speed time end"
-msgstr "Godzina wyłączenia prędkości alternatywnej"
-
-msgid "Alternative speed timing enabled"
-msgstr "Włączanie prędkości alternatywnej w podanym czasie"
-
-msgid "Alternative upload speed"
-msgstr "Alternatywna prędkość wysyłania"
-
-msgid "Automatically start added torrents"
-msgstr "Automatyczne rozpoczęcie pobierania nowych torrentów"
-
-msgid "Bandwidth settings"
-msgstr "Ustawienia przepustowości"
-
-msgid "Binding address IPv4"
-msgstr "Przypisanie adresu IPv4"
-
-msgid "Binding address IPv6"
-msgstr "Przypisanie adresu IPv6"
-
-msgid "Block list enabled"
-msgstr "Lista blokowania włączona"
-
-msgid "Blocklist URL"
-msgstr "URL listy blokowania"
-
-msgid "Blocklists"
-msgstr "Listy blokowania"
-
-msgid "Cache size in MB"
-msgstr "Wielkość cache w MB"
-
-msgid "Config file directory"
-msgstr "Katalog z plikiem konfiguracyjnym"
-
-msgid "DHT enabled"
-msgstr "DHT włączone"
-
-msgid "Debug"
-msgstr "Debug"
-
-msgid "Download directory"
-msgstr "Katalog pobierania"
-
-msgid "Download queue enabled"
-msgstr "Kolejka pobierania włączona"
-
-msgid "Download queue size"
-msgstr "Rozmiar kolejki pobierania"
-
-msgid "Enable watch directory"
-msgstr "Włącz folder obserwowany"
-
-msgid "Enabled"
-msgstr "Włączone"
-
-msgid "Encryption"
-msgstr "Szyfrowanie"
-
-msgid "Error"
-msgstr "Błąd"
-
-msgid "Fast"
-msgstr "Szybko"
-
-msgid "Files and Locations"
-msgstr "Pliki i położenia"
-
-msgid "Forced"
-msgstr "Wymuszone"
-
-msgid "Full"
-msgstr "Pełne"
-
-msgid "Global peer limit"
-msgstr "Globalny limit peerów"
-
-msgid "Global settings"
-msgstr "Ustawienia globalne"
-
-msgid "Idle seeding limit"
-msgstr ""
-
-#, fuzzy
-msgid "Idle seeding limit enabled"
-msgstr "Włączony limit transferu podczas bezczynności"
-
-msgid "Incomplete directory"
-msgstr "Niekompletny katalog"
-
-msgid "Incomplete directory enabled"
-msgstr "Opcja \"Niekompletny katalog\" włączona"
-
-msgid "Info"
-msgstr "Info"
-
-msgid "LPD enabled"
-msgstr "LPD włączone"
-
-#, fuzzy
-msgid "Lazy bitfield enabled"
-msgstr "Lazy bitfield włączone"
-
-msgid "Message level"
-msgstr "Poziom komunikatów"
-
-msgid "Miscellaneous"
-msgstr "Różności"
-
-msgid "None"
-msgstr "Żaden"
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-"Liczba/pole bitowe. Zaczyna się od 0, następnie dla każdego dnia dla jakiego "
-"chcesz włączyć harmonogram dodaj odpowiednią wartość. Niedziela - 1, "
-"Poniedziałek - 2, Wtorek - 4, Środa - 8, Czwartek - 16, Piątek - 32, sobota "
-"- 64."
-
-msgid "Off"
-msgstr "Wyłączone"
-
-msgid "Open Web Interface"
-msgstr "Otwórz interfejs Web"
-
-msgid "PEX enabled"
-msgstr "PEX włączony"
-
-msgid "Peer Port settings"
-msgstr "Ustawienia portu peer"
-
-msgid "Peer congestion algorithm"
-msgstr "Algorytm przeciążenia peer"
-
-msgid "Peer limit per torrent"
-msgstr "Limit peer'a dla torrenta"
-
-msgid "Peer port"
-msgstr "Port peer"
-
-#, fuzzy
-msgid "Peer port random high"
-msgstr "Maksymalny losowany port peer`a"
-
-#, fuzzy
-msgid "Peer port random low"
-msgstr "Minimalny losowany port peer`a"
-
-#, fuzzy
-msgid "Peer port random on start"
-msgstr "Losowy port peer`a przy starcie"
-
-msgid "Peer settings"
-msgstr "Ustawienia peer"
-
-msgid "Peer socket tos"
-msgstr "Typ gniazda <abbr title=\"Type-Of-Service w TCP\">TOS</abbr> peer`a"
-
-msgid "Port forwarding enabled"
-msgstr "Przekazywanie portów włączone"
-
-msgid "Preferred"
-msgstr "Preferowany"
-
-msgid "Prefetch enabled"
-msgstr "Pobieranie wstępne włączone"
-
-msgid "Queue stalled enabled"
-msgstr "Blokada kolejki włączona"
-
-msgid "Queue stalled minutes"
-msgstr "Blokada kolejki w min."
-
-msgid "Queueing"
-msgstr "Kolejkowanie"
-
-msgid "RPC URL"
-msgstr "Adres URL RPC"
-
-msgid "RPC authentication required"
-msgstr "Wymagana autoryzacja RPC"
-
-#, fuzzy
-msgid "RPC bind address"
-msgstr "Adres węzła RPC"
-
-msgid "RPC enabled"
-msgstr "RPC włączone"
-
-msgid "RPC password"
-msgstr "Hasło RPC"
-
-msgid "RPC port"
-msgstr "Port RPC"
-
-msgid "RPC settings"
-msgstr "Ustawienia RPC"
-
-msgid "RPC username"
-msgstr "Nazwa użytkownika RPC"
-
-msgid "RPC whitelist"
-msgstr "Biała lista RPC"
-
-msgid "RPC whitelist enabled"
-msgstr "Biała lista RPC włączona"
-
-msgid "Ratio limit"
-msgstr "Dopuszczalna wartość"
-
-msgid "Ratio limit enabled"
-msgstr "Dopuszczalna wartość włączona"
-
-msgid "Rename partial files"
-msgstr "Zmień nazwy plików częściowych"
-
-msgid "Run daemon as user"
-msgstr "Włączaj demona jako użytkownik"
-
-msgid "Scheduling"
-msgstr "Harmonogramowanie"
-
-#, fuzzy
-msgid "Scrape paused torrents enabled"
-msgstr "Zdzieranie wstrzymanych torentów włączone"
-
-msgid "Script torrent done enabled"
-msgstr "Włączenie wykonywania skryptu po zakończeniu pobierania"
-
-msgid "Script torrent done filename"
-msgstr "Nazwa skryptu wykonywanego po zakończeniu pobierania"
-
-msgid "Seed queue enabled"
-msgstr "Kolejkowanie Seed'ów włączone"
-
-msgid "Seed queue size"
-msgstr "Rozmiar kolejki Seed'ów"
-
-msgid "Speed limit down"
-msgstr "Limit prędkości pobierania"
-
-msgid "Speed limit down enabled"
-msgstr "Limit prędkości pobierania włączony"
-
-msgid "Speed limit up"
-msgstr "Limit prędkości wysyłania"
-
-msgid "Speed limit up enabled"
-msgstr "Limit prędkości wysyłania włączony"
-
-msgid "Transmission"
-msgstr "Transmission"
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-"Demon Transmission jest prostym klientem BitTorrent. Tutaj możesz zmienić "
-"jego ustawienia."
-
-msgid "Trash original torrent files"
-msgstr "Usuń oryginalne pliki torrent"
-
-msgid "Upload slots per torrent"
-msgstr "Liczba połączeń na plik torrent - wysyłanie"
-
-msgid "Watch directory"
-msgstr "Obserwowany folder"
-
-msgid "in minutes from midnight"
-msgstr "w minutach od północy"
-
-msgid "preallocation"
-msgstr "prealokacja"
-
-msgid "uTP enabled"
-msgstr "uTP włączone"
diff --git a/po/pl/upnp.po b/po/pl/upnp.po
deleted file mode 100644
index f675c22..0000000
--- a/po/pl/upnp.po
+++ /dev/null
@@ -1,152 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-09-20 16:10+0200\n"
-"Last-Translator: Michał <wispwind@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"ACLki określają jakie porty mogą być przekierowane do jakich wewnętrznych "
-"adresów i portów"
-
-msgid "Action"
-msgstr "Akcja"
-
-msgid "Active UPnP Redirects"
-msgstr "Aktywne przekierowania UPnP"
-
-msgid "Advanced Settings"
-msgstr "Ustawienia zaawansowane"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "Zezwól na dodawanie przekierowań tylko do odpytujących adresów IP"
-
-msgid "Announced model number"
-msgstr "Rozgłaszany nr modelu"
-
-msgid "Announced serial number"
-msgstr "rozgłaszany nr seryjny"
-
-msgid "Clean rules interval"
-msgstr "Interwał czyszczenia reguł"
-
-msgid "Clean rules threshold"
-msgstr "Próg czyszczenia reguł"
-
-msgid "Client Address"
-msgstr "Adres klienta"
-
-msgid "Client Port"
-msgstr "Port klienta"
-
-msgid "Collecting data..."
-msgstr "Zbieranie danych..."
-
-msgid "Comment"
-msgstr "Komentarz"
-
-msgid "Delete Redirect"
-msgstr "Usuń przekierowanie"
-
-msgid "Device UUID"
-msgstr "UUID urządzenia"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Włącz funkcjonalność NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Włącz funkcjonalność UPnP"
-
-msgid "Enable additional logging"
-msgstr "Włącz rozszerzone raportowanie"
-
-msgid "Enable secure mode"
-msgstr "Włącz tryb bezpieczny"
-
-msgid "External Port"
-msgstr "Port zewnętrzny"
-
-msgid "External ports"
-msgstr "Porty zewnętrzne"
-
-msgid "General Settings"
-msgstr "Ustawienia główne"
-
-msgid "Internal addresses"
-msgstr "Adresy wewnętrzne"
-
-msgid "Internal ports"
-msgstr "Porty wewnętrzne"
-
-msgid "MiniUPnP ACLs"
-msgstr "AClki MiniUPnP"
-
-msgid "MiniUPnP settings"
-msgstr "Ustawienia MiniUPnP"
-
-msgid "Notify interval"
-msgstr "Interwał powiadamiania"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Presentation URL"
-msgstr "Przedstawiany URL"
-
-msgid "Protocol"
-msgstr "Protokół"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Dodaje dodatkowe informacje debugowania do loga systemowego"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Zgłaszaj uptime systemowy zamiast uptime'u usługi"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Uruchom usługi UPnP i NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Nie ma aktywnych przekierowań"
-
-msgid "UPNP"
-msgstr "UPNP"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP umożliwia klientom w sieci lokalnej automatyczne konfigurowanie routera."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP umożliwia klientom w sieci lokalnej automatyczne konfigurowanie routera."
-
-msgid "UPnP lease file"
-msgstr "Plik dzierżawy UPnP"
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Wartość w KBajt/s, tylko informacyjnie"
-
-msgid "enable"
-msgstr "enable"
diff --git a/po/pl/ushare.po b/po/pl/ushare.po
deleted file mode 100644
index 2a26404..0000000
--- a/po/pl/ushare.po
+++ /dev/null
@@ -1,54 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-08 13:18+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "Katalogi zawartości"
-
-msgid "Disable telnet console"
-msgstr "Wyłącz konsolę telnet"
-
-msgid "Disable webinterface"
-msgstr "Wyłącz interfejs web"
-
-msgid "Enable"
-msgstr "Włącz"
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid "Options"
-msgstr "Opcje"
-
-msgid "Servername"
-msgstr "Nazwa serwera"
-
-msgid "Settings"
-msgstr "Ustawienia"
-
-msgid "Username"
-msgstr "Użytkownik"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"uShare jest serwerem mediów UPnP (TM) i DLNA. Implementuje serwer, który "
-"udostępnia urządzenia medialne UPnP z informacjami na temat dostępnych "
-"plików multimedialnych."
diff --git a/po/pl/uvc_streamer.po b/po/pl/uvc_streamer.po
deleted file mode 100644
index cd36663..0000000
--- a/po/pl/uvc_streamer.po
+++ /dev/null
@@ -1,44 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-08-25 19:35+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Klatek na sekundę"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Rozdzielczość"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Ustawienia"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Strumieniowanie z kamery internetowej"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Skonfiguruj swoją kamerę internetową zgodną z Linux-UVC. Wpisz w "
-"przeglądarce adres <a href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/pl/vnstat.po b/po/pl/vnstat.po
deleted file mode 100644
index 5b0d8b0..0000000
--- a/po/pl/vnstat.po
+++ /dev/null
@@ -1,69 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-09-20 12:21+0200\n"
-"Last-Translator: Michał <wispwind@gmail.com>\n"
-"Language-Team: German\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configuration"
-msgstr "Konfiguracja"
-
-msgid "Daily traffic"
-msgstr "Obciążenie dzienne"
-
-msgid "Graphs"
-msgstr "Wykresy"
-
-msgid "Hourly traffic"
-msgstr "Obciążenie godzinowe"
-
-msgid "Monitor selected interfaces"
-msgstr "Monitoruj wybrane interfejsy"
-
-msgid "Monthly traffic"
-msgstr "Obciążenie miesięczne"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Nie ustawiono żadnej bazy danych. Idź do konfiguracji VnStat i włącz "
-"monitorowanie dla jednego lub więcej interfejsów."
-
-msgid "Restart VnStat"
-msgstr "Restartuj VnStat"
-
-msgid "Summary display"
-msgstr "Podsumowanie"
-
-msgid "Top 10 display"
-msgstr "TOP 10"
-
-msgid "Update »"
-msgstr "Aktualizuj »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Wykresy VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Monitor obciążenia VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat to aplikacja monitorująca ruch sieciowy w Linuxie, który utrzymuje "
-"loga ruchu sieciowego dla określonych interfejsów."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "Usługa VnStat została uruchomiona ponownie."
diff --git a/po/pl/voice_core.po b/po/pl/voice_core.po
deleted file mode 100644
index 39950f8..0000000
--- a/po/pl/voice_core.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-08-24 07:03+0200\n"
-"Last-Translator: goodgod261 <goodgod261@wp.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Telefony"
-
-msgid "Voice"
-msgstr "Głos"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/pl/voice_diag.po b/po/pl/voice_diag.po
deleted file mode 100644
index cb19e22..0000000
--- a/po/pl/voice_diag.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-09-20 12:16+0200\n"
-"Last-Translator: Michał <wispwind@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Diagnostics"
-msgstr "Diagnostyka"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Diagnostyka dostępna na Twoim urządzeniu zależna jest od zainstalowanych "
-"modułów."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"To menu zawiera opcje pozwalające na konfiguracje i testowanie operacji "
-"głosowych w Twoim systemie. Opcje te nazwamy Diagnostyką."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/pl/watchcat.po b/po/pl/watchcat.po
deleted file mode 100644
index 6e08de5..0000000
--- a/po/pl/watchcat.po
+++ /dev/null
@@ -1,69 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-21 02:13+0200\n"
-"Last-Translator: Tomecki <przykryweczka@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Forced reboot delay"
-msgstr "Wymuszone opóźnienie restartu"
-
-msgid "Host address to ping"
-msgstr "Adres hosta do pingowania"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"Jak często sprawdzać połączenie internetowe. Domyślną jednostką jest "
-"sekunda, można także użyć 'm' dla minut, 'h' dla godzin lub 'd' dla dni"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"W trybie okresowym, określa to restart. W trybie internetowym, określa "
-"najdłuższy okres czasu bez dostępu do internetu przed restartem. Domyślną "
-"jednostką jest sekunda, można także użyć 'm' dla minut, 'h' dla godzin lub "
-"'d' dla dni"
-
-msgid "Operating mode"
-msgstr "Tryb pracy"
-
-msgid "Period"
-msgstr "Okres"
-
-msgid "Ping host"
-msgstr "Host do pingowania"
-
-msgid "Ping period"
-msgstr "Czas pomiędzy wysyłaniem pingów"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Watchcat pozwala na skonfigurowanie okresowych restartów, jeśli połączenie "
-"internetowe zostanie utracone na określony czas."
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"Restart routera Watchcat wykonuje za pomocą tzw. \"miękkiego restartu\". "
-"Wpisując tutaj wartość niezerową, wymusimy \"twardy restart\" jeśli \"miękki "
-"restart\" się nie powiedzie. Podaj czas w sekundach lub wpisz 0 (zero) aby "
-"wyłączyć restarty."
diff --git a/po/pl/wol.po b/po/pl/wol.po
deleted file mode 100644
index e0797b4..0000000
--- a/po/pl/wol.po
+++ /dev/null
@@ -1,56 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2011-08-25 19:04+0200\n"
-"Last-Translator: Staszek <fistaszek@tlen.pl>\n"
-"Language-Team: none\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Rozgłaszaj na wszystkie interfejsy"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Wybierz hosta z listy lub podaj adres MAC maszyny do wybudzenia"
-
-msgid "Host to wake up"
-msgstr "Host do wybudzenia"
-
-msgid "Network interface to use"
-msgstr "Użyty interfejs sieciowy"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Czasem działa tylko jedno z narzędzi. Jeżeli jedno z nich nie zadziała, "
-"proszę użyć drugiego."
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Definiuje interfejs, na który będzie wysłany pakiet WoL"
-
-msgid "Starting WoL utility:"
-msgstr "Uruchamianie narzędzia WoL:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"\"Wake on LAN\" to mechanizm służący do zdalnego włączania komputerów w "
-"sieci lokalnej."
-
-msgid "Wake up host"
-msgstr "Wybudź hosta"
-
-msgid "WoL program"
-msgstr "Narzędzie WoL"
diff --git a/po/pl/wshaper.po b/po/pl/wshaper.po
deleted file mode 100644
index ab074a4..0000000
--- a/po/pl/wshaper.po
+++ /dev/null
@@ -1,58 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-04-14 14:15+0200\n"
-"PO-Revision-Date: 2012-04-14 17:21+0200\n"
-"Last-Translator: Tomecki <przykryweczka@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 "
-"|| n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Przepustowość pobierania w kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Adres hosta lub adres sieci w notacji CIDR"
-
-msgid "Interface"
-msgstr "Interfejs"
-
-msgid "Low priority destination ports"
-msgstr "Porty docelowe o niskim priorytecie"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Hosty docelowe o niskim priorytecie"
-
-msgid "Low priority hosts (Source)"
-msgstr "Hosty źródłowe o niskim priorytecie"
-
-msgid "Low priority source ports"
-msgstr "Porty źródłowe o niskim priorytecie"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Przepustowość wysyłania w kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Ustawienia Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper wykorzystuje kształtowanie ruchu aby zapewnić niskie opóźnienia "
-"nawet wtedy, gdy Twoje połączenie internetowe jest wysycone."
diff --git a/po/pt/ahcp.po b/po/pt/ahcp.po
deleted file mode 100644
index 33e2767..0000000
--- a/po/pt/ahcp.po
+++ /dev/null
@@ -1,106 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "AHCP Server"
-msgstr ""
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Lease directory"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Served interfaces"
-msgstr ""
-
-msgid "Server"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "Unique ID file"
-msgstr ""
diff --git a/po/pt/asterisk.po b/po/pt/asterisk.po
deleted file mode 100644
index d1b9836..0000000
--- a/po/pt/asterisk.po
+++ /dev/null
@@ -1,150 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: 2009-05-20 11:54+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Opções Gerais do Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Directorio AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Guardar em cache os ficheiros de som durante a gravação"
-
-#~ msgid "Debug Level"
-#~ msgstr "Nível de debug"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Desactivar alguns avisos"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Guardar o core quando houver crash"
-
-#~ msgid "High Priority"
-#~ msgstr "Alta Prioridade"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Inicializar Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Usar temporizações internas"
-
-#~ msgid "Log directory"
-#~ msgstr "Directorio de registos"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Maximo de chamadas permitidas"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Maximo de carga para deixar de aceitar novas chamadas"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Desactivar cores na consola"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Directorio de cache para ficheiros de som"
-
-#~ msgid "The Group to run as"
-#~ msgstr "O grupo sob o qual o asterisk será executado"
-
-#~ msgid "The User to run as"
-#~ msgstr "O utilizador sob o qual o asterisk será executado"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Directorio da spool de voicemail"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Prefixar o nome de sistema à UniquID"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr ""
-#~ "Construir os caminhos de transcode atraves de SLINEAR e não directamente"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Transmitir silencio SLINEAR durante a gravação de um canal"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Nivel de verbosidade"
-
-#~ msgid "Time Zone"
-#~ msgstr "Fuso Horário"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Secção do Plano de Marcação"
-
-#~ msgid "include"
-#~ msgstr "incluir"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Extensão do Plano de Marcação"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Opções Gerais do Plano de Marcação"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Permitir transferência"
-
-#~ msgid "Reinvite/redirect media connections"
-#~ msgstr "Redirigir/Repetir ligações multimedia"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Limpar variaveis globais"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "Encaminhamento do Plano de Marcação"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Conferencia do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Dialplan Time"
-#~ msgstr "Conferencia do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Encaminhamento do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Secção do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Connection to use"
-#~ msgstr "Secção do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "IAX General Options"
-#~ msgstr "Opções Gerais do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Allow Codecs"
-#~ msgstr "Opções Gerais do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Section sipgeneral"
-#~ msgstr "Opções Gerais do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Allow codecs"
-#~ msgstr "Opções Gerais do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "SIP realm"
-#~ msgstr "Opções Gerais do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Voicemail general options"
-#~ msgstr "Opções Gerais do Plano de Marcação"
-
-#, fuzzy
-#~ msgid "Voice Zone settings"
-#~ msgstr "Secção do Plano de Marcação"
diff --git a/po/pt/base.po b/po/pt/base.po
deleted file mode 100644
index 4152a1f..0000000
--- a/po/pt/base.po
+++ /dev/null
@@ -1,3592 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: 2009-05-19 17:20+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-msgid "(%s available)"
-msgstr "(%s disponível)"
-
-msgid "(empty)"
-msgstr ""
-
-msgid "(no interfaces attached)"
-msgstr ""
-
-msgid "-- Additional Field --"
-msgstr "-- Campo Adicional --"
-
-msgid "-- Please choose --"
-msgstr "-- Por favor escolha --"
-
-msgid "-- custom --"
-msgstr "-- personalizado --"
-
-msgid "1 Minute Load:"
-msgstr ""
-
-msgid "15 Minute Load:"
-msgstr ""
-
-msgid "40MHz 2nd channel above"
-msgstr ""
-
-msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr ""
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-"<abbr title=\"Identificador de Conjunto Básico de Serviços\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"<abbr title=\"Identificador de Conjunto de Serviços Estendidos\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Endereço <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "Gateway <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-"Máscara de rede <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Endereço do Protocolo de Internet Versão 6\">IPv6</abbr> do "
-"host ou rede"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "Gateway <abbr title=\"Protocolo de Internet Versão 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Configuração do <abbr title=\"Diodo Emissor de Luz\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Endereço <abbr title=\"Controle de Acesso ao Meio\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr "Suporte AR"
-
-msgid "ARP retry threshold"
-msgstr ""
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr "Access Point (AP)"
-
-msgid "Action"
-msgstr "Acção"
-
-msgid "Actions"
-msgstr "Acções"
-
-msgid "Activate this network"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Rotas-<abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr> activas"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Rotas-<abbr title=\"Protocolo de Internet Versão 6\">IPv6</abbr> activas"
-
-msgid "Active Connections"
-msgstr "Ligações Activas"
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Adicionar"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr ""
-
-msgid "Additional Hosts files"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr "Administração"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Advertise IPv6 on network"
-msgstr ""
-
-msgid "Advertised network ID"
-msgstr ""
-
-msgid "Alert"
-msgstr ""
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Permitir autenticação <abbr title=\"Shell Seguro\">SSH</abbr> por senha"
-
-msgid "Allow all except listed"
-msgstr "Permitir todos, excepto os listados"
-
-msgid "Allow listed only"
-msgstr "Permitir somente os listados"
-
-msgid "Allow localhost"
-msgstr ""
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr ""
-
-msgid "Antenna 2"
-msgstr ""
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr "Aplicar"
-
-msgid "Applying changes"
-msgstr "A aplicar as alterações"
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr ""
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr "Autenticação PEAP"
-
-msgid "Authoritative"
-msgstr "Autoritário"
-
-msgid "Authorization Required"
-msgstr "Autorização Requerida"
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr "Disponível"
-
-msgid "Available packages"
-msgstr ""
-
-msgid "Average:"
-msgstr ""
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr ""
-
-msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
-
-msgid "Back to scan results"
-msgstr ""
-
-msgid "Background Scan"
-msgstr "Procurar em Segundo Plano"
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr "Backup / Restauração"
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr ""
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr "Ponte"
-
-msgid "Bridge interfaces"
-msgstr "Activar ponte no interface"
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr ""
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr "Uso da CPU (%)"
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr "Cancelar"
-
-msgid "Chain"
-msgstr "Chain"
-
-msgid "Changes"
-msgstr "Alterações"
-
-msgid "Changes applied."
-msgstr "Alterações aplicadas."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check"
-msgstr ""
-
-msgid "Checksum"
-msgstr "Checksum"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr "Esta interface ainda não pertence a nenhuma zona de firewall."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr "Cliente"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr "Comando"
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr "Compressão"
-
-msgid "Configuration"
-msgstr "Configuração"
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr "Confirmação"
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr "Limite de Ligações"
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr "Código do País"
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr "Criar / Atribuir a uma zona de firewall"
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Customiza o comportamento dos <abbr title=\"Diodo Emissor de Luz\">LED</"
-"abbr>s se possível."
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr "Opções DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr "Apagar"
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr "Descrição"
-
-msgid "Design"
-msgstr "Tema"
-
-msgid "Destination"
-msgstr "Destino"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "Desactivar temporizador de HW-Beacon"
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr "Optimização de Distância"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distância para o último host da rede (em metros)."
-
-msgid "Diversity"
-msgstr "Diversidade"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq é um servidor combinado de <abbr title=\"Protocolo de Configuração "
-"Dinâmica de Hosts\">DHCP</abbr> e <abbr title=\"Sistema de Nomes de Domínios"
-"\">DNS</abbr> para firewalls <abbr title=\"Tradução de Endereço de Rede"
-"\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr "Não enviar respostas a sondas"
-
-msgid "Domain required"
-msgstr "Requerer domínio"
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Não encaminhar consultas <abbr title=\"Sistema de Nomes de Domínios\">DNS</"
-"abbr> sem o nome do <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-msgid "Download and install package"
-msgstr "Descarga e instalação de pacote"
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear oferece um acesso shell seguro à rede <abbr title=\"Shell Seguro\">"
-"(SSH)</abbr> e um servidor <abbr title=\"Cópia Segura\">SCP</abbr> integrado"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"<abbr title=\"Protocolo de Configuração Dinâmica de Hosts\">DHCP</abbr> "
-"Dinâmico"
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr "Tipo de EAP"
-
-msgid "Edit"
-msgstr "Editar"
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr ""
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr "Ativar/Desativar"
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr "Encriptação"
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr "Erro"
-
-msgid "Ethernet Adapter"
-msgstr "Adaptador Ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Switch Ethernet"
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "Frames Rápidas"
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr "Sistema de Ficheiros"
-
-msgid "Filter"
-msgstr "Filtro"
-
-msgid "Filter private"
-msgstr "Filtrar endereços privados"
-
-msgid "Filter useless"
-msgstr "Filtro de consultas inuteis de Windows"
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr "Procurar pacote"
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr "Estado da Firewall"
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr "Flags"
-
-msgid "Flash Firmware"
-msgstr "Gravar Firmware"
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr "Forçar"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr "Fragmentation Threshold"
-
-msgid "Frame Bursting"
-msgstr "Frame Bursting"
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr "Salto de Frequência"
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr "Ir para a página respectiva de configuração"
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr "Suspender"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Aqui pode configurar os aspectos básicos do seu equipamento,  como o nome do "
-"host ou o fuso horário."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"Ocultar <abbr title=\"Identificador de Conjunto de Serviços Estendidos"
-"\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Entradas de Hosts"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"<abbr title=\"Endereço do Protocolo de Internet\">IP</abbr> do host ou rede"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr "Hostnames"
-
-msgid "IP address"
-msgstr "Endereço IP"
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr "Configuração IPv6"
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Identidade PEAP"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Se a sua memória física for insuficiente, os dados poderão ser trocados "
-"temporariamente para um dispositivo swap, resultando em uma maior quantidade "
-"de memória utilizável <abbr title=\"Memória de Acesso Aleatório\">RAM</"
-"abbr>. Esteja ciente de que a troca de dados (swap) é um processo muito "
-"lento pois o dispositivo swap não pode ser acedido com um nível elevado de "
-"memória <abbr title=\"Memória de Acesso Aleatório\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr "Ignorar Interface"
-
-msgid "Ignore resolve file"
-msgstr "Ignorar ficheiro resolv.conf"
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr "Entrada"
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr "Script de inicialização"
-
-msgid "Initscripts"
-msgstr "Scripts de Inicialização"
-
-msgid "Install"
-msgstr "Instalar"
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr "Valor inválido"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Username inválido e/ou a password! Por favor, tente novamente."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"A imagem que está a tentar carregar aparenta nao caber na flash do "
-"equipamento. Por favor verifique o ficheiro de imagem."
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr "Registo do Kernel"
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr "Chave"
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr "Matar"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr "Idioma"
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr "Ficheiro de Atribuições"
-
-msgid "Leasetime"
-msgstr "Tempo de atribuição DHCP"
-
-msgid "Leasetime remaining"
-msgstr "Tempo de atribuição restante"
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr "Limite"
-
-msgid "Link On"
-msgstr "Link Activo"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "Carga"
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Hora Local"
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr "Localizar consultas"
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr "Registo das consultas"
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr "Login"
-
-msgid "Logout"
-msgstr "Logout"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr "Filtro de Endereço-MAC"
-
-msgid "MAC-Filter"
-msgstr "Filtro de MAC"
-
-msgid "MAC-List"
-msgstr "Lista de MAC"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr "Taxa Máxima"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr "Taxa Máxima"
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memória"
-
-msgid "Memory usage (%)"
-msgstr "Uso de memória (%)"
-
-msgid "Metric"
-msgstr "Métrica"
-
-msgid "Minimum Rate"
-msgstr "Taxa Mínima"
-
-msgid "Minimum hold time"
-msgstr "Taxa Mínima"
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid "Modem device"
-msgstr "Dispositivo do Modem"
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr "Ponto de Montagem"
-
-msgid "Mount Points"
-msgstr "Ponto de Montagem"
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Pontos de montagem definem em que ponto um dispositivo de memória será "
-"anexado ao sistema de arquivos"
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr "Sistemas de arquivos montados"
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr "Taxa de Multicast"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr "Navegação"
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr "Tabela sem chains"
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr "Sem regras nesta chain"
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Configuração-OPKG"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Nesta página pode configurar as interfaces de rede. Pode ter várias "
-"interfaces do tipo bridge, assinalando o campo \"interfaces bridge\" e "
-"inserir os nomes de várias interfaces de rede separadas por espaços. Pode "
-"também usar a notação para <abbr title=\"Rede Local Virtual\">VLAN</abbr> "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"por exemplo\">ex.</abbr>: "
-"<samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr "Opções"
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr "Saída"
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr "Canais de Outdoor"
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "Visão geral"
-
-msgid "Owner"
-msgstr "Dono"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr "Encapsulamento PPPoA "
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "Nome do Pacote"
-
-msgid "Packets"
-msgstr "Pacotes"
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr "Senha"
-
-msgid "Password authentication"
-msgstr "Autenticação por senha"
-
-msgid "Password of Private Key"
-msgstr "Senha da Chave Privada"
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr "Directorio do Certificado CA"
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "Directorio da Chave Privada"
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr "Executar reinicialização"
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr "Insira o seu username e password."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Por favor aguarde: Equipamento a reiniciar..."
-
-msgid "Policy"
-msgstr "Política"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr "Impede a comunicação de Cliente para Cliente"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Proceder"
-
-msgid "Processes"
-msgstr "Processos"
-
-msgid "Prot."
-msgstr "Protocolo"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS Threshold"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Ler <code>/etc/ethers</code> para configurar o Servidor-<abbr title="
-"\"Protocolo de Configuração Dinâmica de Hosts\">DHCP</abbr>"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Reboot"
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr "Reinicia o seu equipamento"
-
-msgid "Receive"
-msgstr "Receber"
-
-msgid "Receiver Antenna"
-msgstr "Antena de Recepção"
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr "Referências"
-
-msgid "Regulatory Domain"
-msgstr "Domínio Regulatório"
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr "Remover"
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr "Substituir entrada"
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Reset"
-
-msgid "Reset Counters"
-msgstr "Reiniciar contadores"
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr "Reiniciar Firewall"
-
-msgid "Restore backup"
-msgstr "Restaurar backup"
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr "Reverter"
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr "Rota"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"As rotas especificam através de que interfaces ou gateways podem ser "
-"alcançados determinadas redes ou hosts."
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Salvar"
-
-msgid "Save & Apply"
-msgstr "Salvar & Aplicar"
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr "Procurar"
-
-msgid "Scheduled Tasks"
-msgstr "Tarefas Agendadas"
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr "Isolar Clientes"
-
-msgid "Separate WDS"
-msgstr "Separar WDS"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "Serviços"
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr "Tamanho"
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr "Ir para o conteúdo"
-
-msgid "Skip to navigation"
-msgstr "Ir para a navegação"
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr "Software"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr "Origem"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr "Início"
-
-msgid "Start priority"
-msgstr "Prioridade de inicialização"
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr "Rotas Estáticas IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Rotas Estáticas IPv6"
-
-msgid "Static Leases"
-msgstr "Atribuições Estáticas"
-
-msgid "Static Routes"
-msgstr "Rotas Estáticas"
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr "Ordem Exacta"
-
-msgid "Submit"
-msgstr "Enviar"
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr "Switch"
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "System Log"
-msgstr "Registo do Sistema"
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr "Tabela"
-
-msgid "Target"
-msgstr "Destino"
-
-msgid "Terminate"
-msgstr "Terminar"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"O arquivo do dispositivo de memória ou da partição (<abbr title=\"por exemplo"
-"\">ex.</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"O sistema que foi usado para formatar a memória (<abbr title=\"por exemplo"
-"\">ex.</abbr> <samp><abbr title=\"Sistema de Arquivos ext3\">ext3</abbr></"
-"samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr "Foram recuperadas as seguintes alterações "
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"O sistema está a carregar o firmware para a flash.<br /> NÃO DESLIGUE O "
-"EQUIPAMENTO!<br /> Espere alguns minutos até tentar uma ligação. Dependendo "
-"da sua configuração, ode ser necessário renovar o endereço do seu computador "
-"para poder ligar novamente ao router."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"A imagem carregada não contém um formato suportado. Confirme que escolhe uma "
-"imagem genérica para a sua plataforma."
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Este é o único <abbr title=\"Protocolo de Configuração Dinâmica de Hosts"
-"\">DHCP</abbr> na rede local"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "Este é o sistema de agendamento de tarefas."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Esta lista fornece uma visão geral sobre os processos em execução no sistema."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "Esta página fornece informações sobre as ligações de rede activas."
-
-msgid "This section contains no values yet"
-msgstr "Esta secção ainda não contêm valores"
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Fuso Horário"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "Tráfego"
-
-msgid "Transfer"
-msgstr "Transferências"
-
-msgid "Transmission Rate"
-msgstr "Taxa de Transmissão"
-
-msgid "Transmit"
-msgstr "Transmitir"
-
-msgid "Transmit Power"
-msgstr "Potência de Transmissão"
-
-msgid "Transmitter Antenna"
-msgstr "Antena de Transmissão"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "Modo Turbo"
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr "Tipo"
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Alterações não Salvas"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr "Ficheiro carregado"
-
-msgid "Uptime"
-msgstr "Uptime"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Usar <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Usado"
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr "Utilizador"
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "Versão"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr "Modo WMM"
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Aviso: Existem alterações não salvas que serão perdidas durante a "
-"reinicialização!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr "Dispositivo WiFi"
-
-msgid "Wireless Network"
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr "Suporte XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Você pode ativar ou desativar os scripts de inicialização instalados aqui. "
-"As mudanças serão aplicadas após a reinicialização do equipamento.<br /"
-"><strong>Aviso: Se você desativar algum script de inicialização essencial "
-"como por exemplo \"rede/network\", o dispositivo poderá tornar-se "
-"inacessível!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr "automático"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "cria uma ponte sobre determinada(s) interface(s)"
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "desactivar"
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"Ficheiro onde as atribuições <abbr title=\"Protocolo de Configuração "
-"Dinâmica de Hosts\">DHCP</abbr> são armazenadas"
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr ""
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "se o destino for uma rede"
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-"Ficheiro local de <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-msgid "no"
-msgstr ""
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "nenhum"
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr ""
-
-msgid "unspecified"
-msgstr ""
-
-msgid "unspecified -or- create:"
-msgstr ""
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr ""
-
-msgid "« Back"
-msgstr ""
-
-#~ msgid "Active Leases"
-#~ msgstr "Atribuições Activas"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encriptado\">Encr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Rede Local Wireless\">WLAN</abbr>-Pesquisa"
-
-#~ msgid "Create Network"
-#~ msgstr "Criar Rede"
-
-#~ msgid "Link"
-#~ msgstr "Link"
-
-#~ msgid "Networks"
-#~ msgstr "Redes"
-
-#~ msgid "Power"
-#~ msgstr "Potência"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Redes Wifi no seu ambiente local"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "Notação <abbr title=\"Roteamento entre Domínios sem Classe\">CIDR</abbr>: "
-#~ "endereço/prefixo"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "Servidor <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr ""
-#~ "Broadcast <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Endereço <abbr title=\"Protocolo de Internet Versão 6\">IPv6</abbr>"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "As portas de rede do seu router podem ser combinadas com diversas <abbr "
-#~ "title=\"Rede Local Virtual\">VLAN</abbr>s em que os computadores podem "
-#~ "comunicar directamente entre si. As <abbr title=\"Rede Local Virtual"
-#~ "\">VLAN</abbr>s são frequentemente utilizadas para separar segmentos de "
-#~ "redes diferentes. Muitas vezes é padrão uma porta Uplink para a ligação "
-#~ "com a próxima rede, como a Internet e outras portas para uma rede local."
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Ficheiros que devem ser mantidos quando gravar um novo firmware."
-
-#~ msgid "General"
-#~ msgstr "Geral"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Aqui pode personalizar as configurações e funcionalidades do <abbr title="
-#~ "\"Interface de configuração Lua\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Acções pós-gravação"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Estes comandos são executados automaticamente quando uma determinada "
-#~ "configuração da <abbr title=\"Interface de configuração unificada\">UCI</"
-#~ "abbr> está gravada, permitindo mudanças a serem aplicadas "
-#~ "instantaneamente."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"Interface do Utilizador\">UI</abbr>"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Ponto de acesso (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Opções adicionais do pppd"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Fim automático de ligação"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Arquivo de backup"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configurar o servidor DNS local para usar o servidores de nomes "
-#~ "fornecidos pelo PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Script de ligação"
-
-#~ msgid "Create backup"
-#~ msgstr "Criar backup"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Script de fim de ligação"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Editar listas de pacotes e destinos de instalação"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Activar IPv6 no link PPP"
-
-#~ msgid "Firmware image"
-#~ msgstr "Imagem de Firmware"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Aqui pode fazer o backup e restaurar as configurações do seu router. "
-#~ "Também pode restaurar seu router para as configurações pré-definidas."
-
-#~ msgid "Installation targets"
-#~ msgstr "Destino de Instalação"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Manter ficheiros de configuração"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Manter em Actividade"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Permitir o pppd substituir a rota padrão actual e usar a interface PPP "
-#~ "como padrão após a ligação ser efectuada com sucesso"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr ""
-#~ "Deixar o pppd executar este script após o estabelecimento do link PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Deixar o pppd executar este script antes de terminar o link PPP"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Certifique-se que forneceu o código PIN correcto aqui, ou pode bloquear o "
-#~ "seu cartão SIM"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "A maioria deles são servidores de rede, que oferecem um determinado "
-#~ "serviço para seu equipamento ou rede como acesso shell, servindo páginas "
-#~ "web como o <abbr title=\"Interface de configuração Lua\">LuCI</abbr>, "
-#~ "fazendo roteamento, enviando e-mails, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Número de falhas do teste de ligação para reiniciar uma ligação automática"
-
-#~ msgid "PIN code"
-#~ msgstr "Código PIN"
-
-#~ msgid "Package lists"
-#~ msgstr "Listas de pacotes"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Proceder com a restauração das configurações pré-definidas?"
-
-#~ msgid "Processor"
-#~ msgstr "Processador"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Porta RADIUS"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Servidor RADIUS"
-
-#~ msgid "Replace default route"
-#~ msgstr "Substituir a rota padrão"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Restaurar as configurações pré-definidas do router"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Segundos de espera para o modem ficar pronto antes de tentar uma ligação"
-
-#~ msgid "Service type"
-#~ msgstr "Tipo do serviço"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr ""
-#~ "Serviços e daemons que estão a executar diversas tarefas no seu "
-#~ "equipamento."
-
-#~ msgid "Settings"
-#~ msgstr "Definições"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Configurar tempo de espera"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Lamentamos, mas o OpenWrt não suporta uma actualização do sistema para "
-#~ "esta plataforma.<br /> É necessário carregar manualmente uma imagem para "
-#~ "a flash do seu equipamento."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr ""
-#~ "Especificar argumentos adicionais por linha de comando para o pppd aqui"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "O caminho do dispositivo do seu modem, ex. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "Tempo (em segundos) para fim de uma ligação já não utilizada"
-
-#~ msgid "Update package lists"
-#~ msgstr "Actualizar listas de pacotes"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Carregar uma imagem OpenWrt para a flash do router."
-
-#~ msgid "Upload image"
-#~ msgstr "Carregar imagem"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Utilizar DNS do peer"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Precisa de instalar os pacotes \"comgt\" para UMTS/GPRS, \"ppp-mod-pppoe"
-#~ "\" para PPPoE, \"ppp-mod-pppoa\" para PPPoA ou \"pptp\" para o suporte "
-#~ "PPtP"
-
-#~ msgid "back"
-#~ msgstr "voltar"
-
-#~ msgid "buffered"
-#~ msgstr "em buffer"
-
-#~ msgid "cached"
-#~ msgstr "em cache"
-
-#~ msgid "free"
-#~ msgstr "livre"
-
-#~ msgid "static"
-#~ msgstr "estático"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Interface de configuração Lua\">LuCI</abbr> é uma colecção "
-#~ "gratuita de programas Lua incluindo um Framework Web <abbr title=\"Modelo-"
-#~ "Visualização-Controle\">MVC</abbr> e uma Interface Web para micro-"
-#~ "dispositivos. <abbr title=\"Interface de configuração Lua\">LuCI</abbr> é "
-#~ "licenciado sob a Licença Apache."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "Chaves-<abbr title=\"Shell Seguro\">SSH</abbr>"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Um servidor web HTTP/1.1 ligeiro escrito em C e desenvolvido em Lua para "
-#~ "servir LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Um pequeno servidor web que pode ser utilizado para servir a interface "
-#~ "<abbr title=\"Interface de configuração Lua\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "Sobre"
-
-#~ msgid "Addresses"
-#~ msgstr "Endereços"
-
-#~ msgid "Admin Password"
-#~ msgstr "Password do Administrador"
-
-#~ msgid "Alias"
-#~ msgstr "Configuração IP alternativa"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Área de autenticação"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Porta do interface em ponte"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Altera a senha do administrador do sistema (Login <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Cliente (WDS)"
-
-#~ msgid "Configuration file"
-#~ msgstr "Ficheiro de configuração"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Esgotado o tempo de ligação"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Programadores Contribuintes"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP atribuido"
-
-#~ msgid "Document root"
-#~ msgstr "Diretório raiz"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Activar keep-alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Ponte Ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Aqui pode colar suas Chaves-<abbr title=\"Shell Seguro\">SSH</abbr> "
-#~ "públicas (uma por linha) para a autenticação <abbr title=\"Shell Seguro"
-#~ "\">SSH</abbr> por chave-pública."
-
-#~ msgid "ID"
-#~ msgstr "Identificação de interface em ponte"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Configuração IP"
-
-#~ msgid "Interface Status"
-#~ msgstr ""
-#~ "Aqui encontra informações sobre o estado actual do sistema, como <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr>, frequência do relógio, uso "
-#~ "de memória ou uso da interface de rede de dados."
-
-#~ msgid "Lead Development"
-#~ msgstr "Equipa de Desenvolvimento"
-
-#~ msgid "Master"
-#~ msgstr "AP"
-
-#~ msgid "Master + WDS"
-#~ msgstr "AP+WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "Não configurado"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Senha alterada com sucesso"
-
-#~ msgid "Plugin path"
-#~ msgstr "Directorio de plugins"
-
-#~ msgid "Ports"
-#~ msgstr "Portas"
-
-#~ msgid "Primary"
-#~ msgstr "Primário"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Página do Projecto"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Ahdemo"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Obrigado a"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "A área de autenticação (realm) que será mostrada na prompt de "
-#~ "autenticação das páginas protegidas."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Erro Desconhecido"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "padrão é <code>/etc/httpd.conf</code>"
-
-#~ msgid "Package lists updated"
-#~ msgstr "As listas de pacotes foram actualizadas"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Actualizar os pacotes instalados"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Também os arquivos de logs do kernel ou dos serviços podem ser "
-#~ "consultados aqui para obter uma visão geral sobre o seu estado actual."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Aqui você pode encontrar informações sobre o estado actual do sistema, "
-#~ "tais como <abbr title=\"Central Processing Unit\">CPU</abbr>, frequência "
-#~ "do relógio, uso de memória ou da interface de rede de dados."
-
-#~ msgid "Search file..."
-#~ msgstr "Procurar ficheiro..."
-
-# "free as in freedom" equivale a "livre de liberdade" não de "grátis"
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "O <abbr title=\"Interface de configuração Lua\">LuCI</abbr> é um "
-#~ "interface gráfico livre, flexível e fácil de utilizar para configurar o "
-#~ "OpenWrt Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "E agora divirta-se com o seu router!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Agradecemos os seus comentários e sugestões por forma a podermos "
-#~ "continuar a melhorar este interface."
-
-#~ msgid "Hello!"
-#~ msgstr "Olá!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Aviso: No <abbr title=\"Interface de configuração Lua\">LuCI</abbr> as "
-#~ "alterações devem ser confirmadas clicando em Alterações - Salvar &amp; "
-#~ "Aplicar antes de serem aplicadas."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "Nas próximas páginas, pode ajustar todas as definições importantes do seu "
-#~ "router."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr ""
-#~ "A equipa do <abbr title=\"Interface de configuração Lua\">LuCI</abbr>"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Esta é a área de administração do <abbr title=\"Interface de configuração "
-#~ "Lua\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Interface do Utilizador"
-
-#~ msgid "enable"
-#~ msgstr "activar"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr " (opcional)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "Porta do <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "Servidor <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr> será "
-#~ "consultado na ordem do arquivo resolv.conf"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"máximo\">max.</abbr> de <abbr title=\"Protocolo de "
-#~ "Configuração Dinâmica de Hosts\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "tamanho <abbr title=\"máximo\">max.</abbr> do pacote <abbr title="
-#~ "\"Mecanismos de Extensão do Sistema de Nomes de Domínios\">EDNS0</abbr>"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "Isolamento do AP"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Adicione a rede Wifi à rede física"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Criar Rede"
-
-#~ msgid "Devices"
-#~ msgstr "Dispositivos"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Não encaminhar as pesquisas reversas para redes locais"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Activar servidor TFTP"
-
-#~ msgid "Errors"
-#~ msgstr "Erros"
-
-#~ msgid "Essentials"
-#~ msgstr "Básico"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Expandir Hosts"
-
-#~ msgid "First leased address"
-#~ msgstr "Primeiro endereço de atribuição"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Resolve problemas com websites indisponíveis, submissão de formulários ou "
-#~ "comportamentos inesperados de alguns ISP's."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Endereço do Hardware"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Aqui pode configurar os dispositivos wifi instalados. "
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignorar <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Independente (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Ligação Internet"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Cliente (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Atribuições"
-
-#~ msgid "Local Domain"
-#~ msgstr "Domínio Local"
-
-#~ msgid "Local Network"
-#~ msgstr "Rede Local"
-
-#~ msgid "Local Server"
-#~ msgstr "Servidor Local"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Imagem para o boot remoto (PXE)"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Nome da Rede (<abbr title=\"Identificador de Conjunto de Serviços "
-#~ "Estendidos\">ESSID</abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Número de endereços atribuidos"
-
-#~ msgid "Path"
-#~ msgstr "Directório"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Executar Acções"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Impede a comunicação de Cliente para Cliente"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Ponto de Acesso (Access Point)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Ficheiro resolv.conf"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Directório raiz do servidor TFTP"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Foram aplicadas as seguintes alterações "
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Quando gravar um novo firmware com o <abbr title=\"Interface de "
-#~ "configuração Lua\">LuCI</abbr> estes arquivos serão adicionados ao novo "
-#~ "firmware instalado."
-
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "Wireless"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Com o <abbr title=\"Protocolo de Configuração Dinâmica de Hosts\">DHCP</"
-#~ "abbr> os membros da rede podem automaticamente receber as suas "
-#~ "configurações de rede (endereço-<abbr title=\"Protocolo de Internet\">IP</"
-#~ "abbr>, netmask, servidor-<abbr title=\"Sistema de Nomes de Domínios"
-#~ "\">DNS</abbr>, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Pode servir várias redes wifi com o mesmo dispositivo. Esteja ciente de "
-#~ "que existem certas restrições específicas do hardware e do controlador. "
-#~ "Pode normalmente operar 1 rede Ad-Hoc ou até 3 redes AP e 1 Cliente "
-#~ "simultaneamente."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Precisa de instalar os pacotes \"ppp-mod-pppoe\" para PPPoE ou \"pptp\" "
-#~ "para o suporte PPtP"
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#~ msgid "additional hostfile"
-#~ msgstr "ficheiro de hosts adicional"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr ""
-#~ "Adiciona os nomes dos domínios às entradas de hosts no arquivo resolv.conf"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "estático"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "ligação automática"
-
-#~ msgid "concurrent queries"
-#~ msgstr "Consultas simultâneas"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "desabilitar <abbr title=\"Protocolo de Configuração Dinâmica de Hosts"
-#~ "\">DHCP</abbr> para esta interface"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "desligar quando ocioso por"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "Não fazer cache de desconhecidos"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "Filtro de consultas inuteis-<abbr title=\"Sistema de Nomes de Domínios"
-#~ "\">DNS</abbr> de sistemas windows"
-
-#~ msgid "installed"
-#~ msgstr "instalado"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "Localizar o hostname dependendo de sua sub-rede"
-
-#~ msgid "not installed"
-#~ msgstr "não instalado"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "Impede o cache de respostas-<abbr title=\"Sistema de Nomes de Domínios"
-#~ "\">DNS</abbr> negativas"
-
-#~ msgid "query port"
-#~ msgstr "porta para consultas"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmitido / recebido"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "redes contidas"
-
-#~ msgid "all"
-#~ msgstr "todos"
-
-#~ msgid "Code"
-#~ msgstr "Código"
-
-#~ msgid "Distance"
-#~ msgstr "Distância"
-
-#~ msgid "Legend"
-#~ msgstr "Legenda"
-
-#~ msgid "Library"
-#~ msgstr "Biblioteca"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "veja sobre &#39;%s&#39; na página de manual (man)"
-
-#~ msgid "Package Manager"
-#~ msgstr "Gestor de Pacotes"
-
-#~ msgid "Service"
-#~ msgstr "Serviço"
-
-#~ msgid "Statistics"
-#~ msgstr "Estatísticas"
-
-#~ msgid "zone"
-#~ msgstr "Zona"
diff --git a/po/pt/commands.po b/po/pt/commands.po
deleted file mode 100644
index 0e9e65d..0000000
--- a/po/pt/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/pt/coovachilli.po b/po/pt/coovachilli.po
deleted file mode 100644
index 479996d..0000000
--- a/po/pt/coovachilli.po
+++ /dev/null
@@ -1,370 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: 2009-05-20 12:04+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
-
-#~ msgid "General configuration"
-#~ msgstr "Configuração Geral"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Definições gerais do CoovaChilli"
-
-#~ msgid "Command socket"
-#~ msgstr "Socket de comando"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "Socket UNIX para comunicação com  chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Intervalo de refrescamento da configuração"
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Reler o ficheiro de configuração e executar verificações DNS n segundos "
-#~ "de intervalo. Tem o mesmo efeito que o envio do sinal HUP. Se o intervalo "
-#~ "for 0 (zero) esta funcionalidade será desactivada."
-
-#~ msgid "Pid file"
-#~ msgstr "Ficheiro PID"
-
-#~ msgid "Filename to put the process id"
-#~ msgstr "Nome do ficheiro onde será guardado o PID"
-
-#~ msgid "State directory"
-#~ msgstr "Directorio de estado"
-
-#~ msgid "Directory of non-volatile data"
-#~ msgstr "Directorio para dados não-volateis"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "Configuração tun/tap"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Configuração de rede/tun"
-
-#~ msgid "Network down script"
-#~ msgstr "Script de rede/tun em baixo"
-
-#~ msgid ""
-#~ "Script executed after a session has moved from authorized state to "
-#~ "unauthorized"
-#~ msgstr ""
-#~ "Script executado após o estado de uma sessão ser alterado de autorizado "
-#~ "para não-autorizado "
-
-#~ msgid "Network up script"
-#~ msgstr "Script de rede/tun em cima"
-
-#~ msgid "Script executed after the tun network interface has been brought up"
-#~ msgstr "Script executado apos o interface tun de rede ter sido levantado"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Servidor primário de DNS"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Servidor secundário de DNS"
-
-#~ msgid "Domain name"
-#~ msgstr "Domínio"
-
-#~ msgid ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Servidor primário de DNS"
-
-#, fuzzy
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o endereço de servidor DNS a usar "
-#~ "para a resolução de nomes"
-
-#, fuzzy
-#~ msgid "IP down script"
-#~ msgstr "Script de rede/tun em baixo"
-
-#, fuzzy
-#~ msgid "Script executed after the tun network interface has been taken down"
-#~ msgstr ""
-#~ "Script executado após o estado de uma sessão ser alterado de autorizado "
-#~ "para não-autorizado "
-
-#, fuzzy
-#~ msgid "IP up script"
-#~ msgstr "Script de rede/tun em cima"
-
-#, fuzzy
-#~ msgid ""
-#~ "Script executed after the TUN/TAP network interface has been brought up"
-#~ msgstr "Script executado apos o interface tun de rede ter sido levantado"
-
-#, fuzzy
-#~ msgid "Uplink subnet"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o endereço de servidor DNS a usar "
-#~ "para a resolução de nomes"
-
-#, fuzzy
-#~ msgid "Static IP address pool"
-#~ msgstr "Script de rede/tun em cima"
-
-#, fuzzy
-#~ msgid "Specifies a pool of static IP addresses"
-#~ msgstr "Script executado apos o interface tun de rede ter sido levantado"
-
-#, fuzzy
-#~ msgid "TUN/TAP device"
-#~ msgstr "Script de rede/tun em baixo"
-
-#, fuzzy
-#~ msgid "The specific device to use for the TUN/TAP interface"
-#~ msgstr ""
-#~ "Script executado após o estado de uma sessão ser alterado de autorizado "
-#~ "para não-autorizado "
-
-#, fuzzy
-#~ msgid "TX queue length"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid "The TX queue length to set on the TUN/TAP interface"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "Use TAP device"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Use the TAP interface instead of TUN"
-#~ msgstr "Script executado apos o interface tun de rede ter sido levantado"
-
-#, fuzzy
-#~ msgid "DHCP configuration"
-#~ msgstr "Configuração tun/tap"
-
-#, fuzzy
-#~ msgid "Set DHCP options for connecting clients"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "DHCP end number"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "DHCP interface"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Ethernet interface to listen to for the downlink interface"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Listen MAC address"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Leasetime"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Use a DHCP lease of seconds (default 600)"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Admin user"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "NAS IP"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Value to use in RADIUS NAS-IP-Address attribute"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "NAS MAC"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "MAC address value to use in RADIUS Called-Station-ID attribute"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Allow WPA guests"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "UAM configuration"
-#~ msgstr "Configuração tun/tap"
-
-#, fuzzy
-#~ msgid "Unified Configuration Method settings"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "Allow any DNS server"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "Allow any DNS server for unauthenticated clients"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "Allow any IP address"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid ""
-#~ "Allow clients to use any IP settings they wish by spoofing ARP "
-#~ "(experimental)"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "Allowed domains"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid ""
-#~ "Defines a list of domain names to automatically add to the walled garden"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM homepage"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid "URL of homepage to redirect unauthenticated users to"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM static content port"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid "TCP port to bind to for only serving embedded content"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM listening address"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid "IP address to listen to for authentication of clients"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM logout IP"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults "
-#~ "to 1.1.1.1)"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM listening port"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid "TCP port to bind to for authenticating clients (default 3990)"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM secret"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid "Shared secret between uamserver and chilli"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM server"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid "URL of web server to use for authenticating clients"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "UAM user interface"
-#~ msgstr "Domínio"
-
-#, fuzzy
-#~ msgid ""
-#~ "An init.d style program to handle local content on the uamuiport web "
-#~ "server"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid ""
-#~ "Executable to run as a CGI type program (like haserl) for URLs with "
-#~ "extention .chi"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "Directory where embedded local web content is placed"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o dominio a utilizar para pedidos DNS"
-
-#, fuzzy
-#~ msgid "MAC configuration"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Configure MAC authentication"
-#~ msgstr "Configuração de rede/tun"
-
-#, fuzzy
-#~ msgid "Try to authenticate all users based on their mac address alone"
-#~ msgstr "Configuração de rede/tun"
diff --git a/po/pt/ddns.po b/po/pt/ddns.po
deleted file mode 100644
index 01e88cb..0000000
--- a/po/pt/ddns.po
+++ /dev/null
@@ -1,93 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2009-05-19 17:04+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Check for changed IP every"
-msgstr "Intervalo para verificação de alteração do endereço IP"
-
-#, fuzzy
-msgid "Check-time unit"
-msgstr "Unidade de tempo para verificação"
-
-#, fuzzy
-msgid "Custom update-URL"
-msgstr "URL para actualização personalizada"
-
-msgid "Dynamic DNS"
-msgstr "DNS Dinâmico"
-
-#, fuzzy
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"O DNS dinâmico permite que o seu router possa ser encontrado a partir de um "
-"hostname fixo, mesmo usando um Endereço IP dinâmico."
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "Forçar actualização a cada"
-
-#, fuzzy
-msgid "Force-time unit"
-msgstr "Unidade de tempo para actualização forçada"
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-#, fuzzy
-msgid "Source of IP address"
-msgstr "Origem do Endereço IP"
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/pt/diag_core.po b/po/pt/diag_core.po
deleted file mode 100644
index 347bd2f..0000000
--- a/po/pt/diag_core.po
+++ /dev/null
@@ -1,35 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-16 16:41+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: none\n"
-"Language: pt\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configure Diagnostics"
-msgstr "Configurar Diagnósticos"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Com esse menu você pode configurar diagnósticos de rede, tais como explorar "
-"dispositivos de rede e testes ping."
diff --git a/po/pt/diag_devinfo.po b/po/pt/diag_devinfo.po
deleted file mode 100644
index 7161955..0000000
--- a/po/pt/diag_devinfo.po
+++ /dev/null
@@ -1,206 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/pt/ffwizard.po b/po/pt/ffwizard.po
deleted file mode 100644
index 3b13704..0000000
--- a/po/pt/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/pt/firewall.po b/po/pt/firewall.po
deleted file mode 100644
index 1e13d29..0000000
--- a/po/pt/firewall.po
+++ /dev/null
@@ -1,561 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2009-05-20 11:22+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr "Acção"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr "Endereço de destino"
-
-msgid "Destination port"
-msgstr "Porta de destino"
-
-#, fuzzy
-msgid "Destination zone"
-msgstr "Destino"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr "Dropar pacotes inválidos"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-#, fuzzy
-msgid "Enable SYN-flood protection"
-msgstr "Proteção SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr "Porta Externa"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr "Entrada"
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-#, fuzzy
-msgid "Internal IP address"
-msgstr "Endereço interno"
-
-#, fuzzy
-msgid "Internal port"
-msgstr "Porta Externa"
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-#, fuzzy
-msgid "MSS clamping"
-msgstr "MSS-Correction"
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr "Saída"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-#, fuzzy
-msgid "Source IP address"
-msgstr "Endereço MAC de origem"
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-#, fuzzy
-msgid "Source address"
-msgstr "Endereço MAC de origem"
-
-msgid "Source port"
-msgstr "Porta de origem"
-
-#, fuzzy
-msgid "Source zone"
-msgstr "Porta de origem"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"O firewall cria zonas sobre as interfaces de rede para controlar o fluxo do "
-"tráfego."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr "Zonas"
-
-msgid "accept"
-msgstr "aceitar"
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr "dropar"
-
-msgid "reject"
-msgstr "rejeitar"
-
-#~ msgid "Destination"
-#~ msgstr "Destino"
-
-#~ msgid "Source"
-#~ msgstr "Origem"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Porta interna (opcional)"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Regras Avançadas"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "As regras avançadas permitem a personalização da firewall de acordo com "
-#~ "as necessidades. Apenas as novas ligações serão processadas. Pacotes que "
-#~ "pertençam a ligações já abertas estão automaticamente autorizados a "
-#~ "passar pela firewall."
-
-#~ msgid "Port forwarding"
-#~ msgstr "Redirecionamento de portas"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "O redirecionamento de portas permite disponibilizar serviços na rede "
-#~ "interna para uma rede externa."
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Redirecionamento de Tráfego"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "Redirecionamento do tráfego permite a alteração do endereço de destino "
-#~ "dos pacotes enviados."
-
-#, fuzzy
-#~ msgid "Network"
-#~ msgstr "Redes"
-
-#~ msgid "Traffic Control"
-#~ msgstr "Controle de Tráfego"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Tráfego de Zona-para-Zona"
-
-#, fuzzy
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Aqui você pode especificar qual tráfego de rede será permitido para o "
-#~ "fluxo entre zonas das redes. Somente novas conexões serão processadas. "
-#~ "Pacotes pertencentes à conexões já abertas estão automaticamente "
-#~ "permitidos para passar pelo firewall."
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#, fuzzy
-#~ msgid "Destination IP"
-#~ msgstr "Destino"
-
-#, fuzzy
-#~ msgid "IP address"
-#~ msgstr "Endereço IP"
-
-#, fuzzy
-#~ msgid "Source MAC-address"
-#~ msgstr "Endereço MAC de origem"
-
-#~ msgid "Custom forwarding"
-#~ msgstr "Redirecionamento personalizado"
-
-#~ msgid "Input Zone"
-#~ msgstr "Zona de Entrada"
-
-#~ msgid "Output Zone"
-#~ msgstr "Zona de Saída"
-
-#~ msgid "External Zone"
-#~ msgstr "Zona Externa"
-
-#~ msgid "Source MAC"
-#~ msgstr "MAC de origem"
-
-#~ msgid "Defaults"
-#~ msgstr "Padrões"
-
-#~ msgid ""
-#~ "These are the default settings that are used if no other rules match."
-#~ msgstr ""
-#~ "Estas são as configurações padrões, que serão usadas se não houver outras "
-#~ "regras."
-
-#~ msgid ""
-#~ "Zones part the network interfaces into certain isolated areas to separate "
-#~ "network traffic. One or more networks can belong to a zone. The MASQ-flag "
-#~ "enables NAT masquerading for all outgoing traffic on this zone."
-#~ msgstr ""
-#~ "Zonas são interfaces de redes usadas para separar o tráfego da rede. Uma "
-#~ "ou mais redes podem pertencer a uma zona. A flag-MASQ ativa o "
-#~ "mascaramento NAT para todo o tráfego de saída desta zona."
-
-#~ msgid "MASQ"
-#~ msgstr "MASQ"
-
-#~ msgid "contained networks"
-#~ msgstr "redes contidas"
diff --git a/po/pt/freifunk-policyrouting.po b/po/pt/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/pt/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/pt/freifunk.po b/po/pt/freifunk.po
deleted file mode 100644
index 495d111..0000000
--- a/po/pt/freifunk.po
+++ /dev/null
@@ -1,395 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: 2009-05-19 17:33+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr "Coordenadas"
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr "email"
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Olá e benvindo à rede "
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Se estiver interessado no nosso projecto, entre em contacto com a sua "
-"comunidade local"
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"O acesso à Internet depende de factores técnicos e organizacionais, e pode "
-"funcionar ou não no seu caso."
-
-msgid "It is operated by"
-msgstr "É operado por "
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr "Localização"
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memória"
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr "Nome curto (nick)"
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr "Notas"
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr "Telefone"
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr "Nome"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr "Este é o ponto de acesso "
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Somos uma iniciativa para implementação de uma rede livre, independente e "
-"não-comercial."
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr "Pode encontrar mais informações sobre a iniciativa global Freifunk em "
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/pt/hd_idle.po b/po/pt/hd_idle.po
deleted file mode 100644
index 2e2ccd2..0000000
--- a/po/pt/hd_idle.po
+++ /dev/null
@@ -1,51 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2009-05-20 11:15+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Disk"
-msgstr "Disco"
-
-#, fuzzy
-msgid "Enable"
-msgstr "Activar debug"
-
-msgid "Enable debug"
-msgstr "Activar debug"
-
-#, fuzzy
-msgid "Idle-time"
-msgstr "Tempo de ociosidade"
-
-#, fuzzy
-msgid "Idle-time unit"
-msgstr "Unidade do tempo de ociosidade"
-
-msgid "Settings"
-msgstr "Configurações"
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr "Hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"Hd-idle é um programa utilitário para activar o modo \"economia de energia"
-"\" (spinning-down) de discos externos após um período de ociosidade."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
diff --git a/po/pt/meshwizard.po b/po/pt/meshwizard.po
deleted file mode 100644
index 180d771..0000000
--- a/po/pt/meshwizard.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/pt/minidlna.po b/po/pt/minidlna.po
deleted file mode 100644
index 48c6188..0000000
--- a/po/pt/minidlna.po
+++ /dev/null
@@ -1,164 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/pt/mmc_over_gpio.po b/po/pt/mmc_over_gpio.po
deleted file mode 100644
index af0354b..0000000
--- a/po/pt/mmc_over_gpio.po
+++ /dev/null
@@ -1,40 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "Configurações"
diff --git a/po/pt/multiwan.po b/po/pt/multiwan.po
deleted file mode 100644
index 2188822..0000000
--- a/po/pt/multiwan.po
+++ /dev/null
@@ -1,115 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/pt/ntpc.po b/po/pt/ntpc.po
deleted file mode 100644
index 31e0274..0000000
--- a/po/pt/ntpc.po
+++ /dev/null
@@ -1,55 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2009-05-20 12:07+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Clock Adjustment"
-msgstr "Ajuste do Relógio"
-
-#, fuzzy
-msgid "Count of time measurements"
-msgstr "Quantas vezes irá atualizar"
-
-msgid "Current system time"
-msgstr "Hora actual do sistema"
-
-msgid "General"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-#, fuzzy
-msgid "Offset frequency"
-msgstr "Frequência do Offset"
-
-msgid "Port"
-msgstr ""
-
-msgid "Synchronizes the system time"
-msgstr "Sincroniza a hora do sistema"
-
-msgid "Time Server"
-msgstr ""
-
-#, fuzzy
-msgid "Time Servers"
-msgstr "Servidor de Hora"
-
-msgid "Time Synchronisation"
-msgstr "Sincronização de Horário"
-
-#, fuzzy
-msgid "Update interval (in seconds)"
-msgstr "Intervalo de Actualização (em s)"
-
-msgid "empty = infinite"
-msgstr "vazio = infinito"
diff --git a/po/pt/olsr.po b/po/pt/olsr.po
deleted file mode 100644
index 00afe17..0000000
--- a/po/pt/olsr.po
+++ /dev/null
@@ -1,587 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Active MID announcements"
-msgstr "Anuncios MID activos"
-
-msgid "Active OLSR nodes"
-msgstr "Nós OLSR activos"
-
-#, fuzzy
-msgid "Active host net announcements"
-msgstr "Anuncios activos de hosts"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr "Rede anunciada"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr "Contagem esperada de retransmissões"
-
-msgid "FIB metric"
-msgstr "métrica FIB"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr "Definições gerais"
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr "Intervalo entre HNA"
-
-msgid "HNA validity time"
-msgstr "Validade de HNA"
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr "Intervalo entre Hello"
-
-msgid "Hello validity time"
-msgstr "Validade de Hello"
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr "Endereço IPv4 de Broadcast"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr "Versão IP"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr "Rotas OLSR conhecidas"
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr "Envelhecimento LQ"
-
-msgid "LQ algorithm"
-msgstr "Algoritmo LQ"
-
-#, fuzzy
-msgid "LQ fisheye"
-msgstr "LQ Fisheye"
-
-msgid "LQ level"
-msgstr "Nível LQ"
-
-msgid "Last hop"
-msgstr "Ultimo salto"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr "Biblioteca"
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr "Endereço IP do interface local"
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr "Intervalo de MID"
-
-msgid "MID validity time"
-msgstr "Validade de MID"
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Certifique-se que o processo olsrd está em execução, que o plugin \"txtinfo"
-"\" está carregado e configurado para a porta 2006 e que aceita ligações a "
-"partir de \"127.0.0.1\"."
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr "Endereço IP do Vizinho"
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr "Máscara de subrede"
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr "OLSR - Anuncios HNA4"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - Plugins"
-
-msgid "OLSR Daemon"
-msgstr "Servidor OLSR"
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr "OLSR - Ligações"
-
-msgid "OLSR gateway"
-msgstr "gateway OLSR"
-
-msgid "OLSR node"
-msgstr "Nó OLSR"
-
-msgid "Overview"
-msgstr ""
-
-#, fuzzy
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Resumo de anuncios activos de hosts"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Resumo das ligações OLSR actualmente estabelecidas"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Resumo dos nós OLSR conhecidos"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Resumo das rotas conhecidas para outros nós OLSR"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Resumo de anuncios de nós com multiplos interfaces activos"
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr "Configuração de Plugin"
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr "Pollrate"
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr "Prefixo"
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr "Interfaces OLSR secundários"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr "Intervalo de TC"
-
-msgid "TC validity time"
-msgstr "Validade de TC"
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "Não foi possivel ligar ao servidor OLSR!"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr "Usar histerese"
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr "Disponibilidade"
diff --git a/po/pt/openvpn.po b/po/pt/openvpn.po
deleted file mode 100644
index 5779de6..0000000
--- a/po/pt/openvpn.po
+++ /dev/null
@@ -1,552 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: 2009-05-20 10:32+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', ou 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Aceitar opções enviadas pelo servidor"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr "Adicionar rota após estabelecimento da ligação"
-
-msgid "Additional authentication over TLS"
-msgstr "Autenticação adicional por TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Permitir tráfego cliente-a-cliente"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Permitir multiplos clientes com o mesmo certificado"
-
-msgid "Allow only one session"
-msgstr "Permitir apenas uma sessão"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Permitir a um host remoto que altere o seu IP ou porta"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Máximo permitido de clientes ligados"
-
-msgid "Allowed maximum of internal"
-msgstr "Máximo permitido internamente para rotas de clientes"
-
-msgid "Allowed maximum of new connections"
-msgstr "Maximo permitido de novas ligações"
-
-msgid "Append log to file"
-msgstr "Acrescentar registos ao ficheiro"
-
-msgid "Authenticate using username/password"
-msgstr "Autenticar com username/password"
-
-msgid "Automatically redirect default route"
-msgstr "Redireccionar automaticamente a rota pre-definida"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Abaixo está uma lista de todas as instâncias OpenVPN configuradas e o seu "
-"estado actual"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "Executar o comando/script antes do fecho tun/tap"
-
-msgid "Certificate authority"
-msgstr "Autoridade certificadora"
-
-msgid "Change process priority"
-msgstr "Alterar prioridade do processo"
-
-msgid "Change to directory before initialization"
-msgstr "Mudar para o directório antes da inicialização"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Verificar certificado do remoto conta uma CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Chroot para o directorio apos a inicialização"
-
-msgid "Client is disabled"
-msgstr "Cliente desactivado"
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr "Configurar modo cliente"
-
-msgid "Configure server bridge"
-msgstr "Configurar ponte de servidor"
-
-msgid "Configure server mode"
-msgstr "Configurar modo de servidor"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Ligar através de um proxy Socks5"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr "Intervalo de reestabelecimento de ligação"
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr "Passar a daemon após a inicialização"
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "Retardar o script de abertura/activação tun/tap"
-
-msgid "Diffie Hellman parameters"
-msgstr "Parametros Diffie-Hellman"
-
-msgid "Directory for custom client config files"
-msgstr "Directório para configurações personalizadas dos clientes"
-
-msgid "Disable Paging"
-msgstr "Desactivar Paging"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Desactivar o vector de inicialização da cifra"
-
-msgid "Disable options consistency check"
-msgstr "Desactivar opções de verificação de consistência"
-
-msgid "Disable replay protection"
-msgstr "Desactivar protecção contra replay"
-
-msgid "Do not bind to local address and port"
-msgstr "Não activar no endereço e porta locais"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Não executar ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "Não adicionar rotas automaticamente"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "Não colocar em cache as passwords --askpass ou --auth-user-pass "
-
-msgid "Don't inherit global push options"
-msgstr "Não herdar as opções globais de envio (push)"
-
-msgid "Don't log timestamps"
-msgstr "Não registar timestamps"
-
-msgid "Don't re-read key on restart"
-msgstr "Não reler a chave entre reinicios"
-
-msgid "Don't require client certificate"
-msgstr "Não solicitar certificado ao cliente"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Não usar compressão LZO adaptiva"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "Não avisar quando existirem inconsistencias no ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Escrever parametros no registo"
-
-msgid "Empirically measure MTU"
-msgstr "Medição empírica de MTU"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Activar motor OpenSSL por hardware"
-
-msgid "Enable Path MTU discovery"
-msgstr "Activar a descoberta do MTU do caminho"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Activar modo de encriptação por chave estática (não-TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Activar TLS e assumir papel de cliente"
-
-msgid "Enable TLS and assume server role"
-msgstr "Activar TLS e assumir papel de servidor"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Activar a fragmentação interna de datagramas"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Activar o interface de gestão em <em>IP</em> <em>porta</em>"
-
-msgid "Enabled"
-msgstr "Activado"
-
-msgid "Encryption cipher for packets"
-msgstr "Cifra de encriptação para pacotes"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Executar o comando shell após as rotas serem adicionadas"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Executar o comando shell quando existir alteração do IP remoto"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Fechar quando existir falha na negociacao TLS"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Obter password PEM do terminal de controlo antes de passar a daemon"
-
-msgid "HMAC authentication for packets"
-msgstr "Autenticação HMAC para pacotes"
-
-msgid "Handling of authentication failures"
-msgstr "Gestão de falhas de autenticação"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr "Se a resolução de nomes falhar, tentar novamente"
-
-msgid "Instance \"%s\""
-msgstr "Instância \"%s\""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr "Manter o endereço IP local entre reinicios"
-
-msgid "Keep remote IP address on restart"
-msgstr "Manter o endereço IP remoto entre reinicios"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Manter o dispositivo tun/tap aberto entre reinicios"
-
-msgid "Key transition window"
-msgstr "Janela para transição de chaves"
-
-msgid "Limit repeated log messages"
-msgstr "Limitar repetição de entradas no registo"
-
-msgid "Local certificate"
-msgstr "Certificado local"
-
-msgid "Local host name or ip address"
-msgstr "Hostname ou endereço IP local"
-
-msgid "Local private key"
-msgstr "Chave privada local"
-
-msgid "Major mode"
-msgstr "Modo principal"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Tornar o dispositivo tun capaz de IPv6"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Maximo de pacotes TCP na queue de output"
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Numero de buffers de broadcast alocados"
-
-msgid "Number of lines for log file history"
-msgstr "Numero de linhas para o historico do registo"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Aceitar ligações apenas de um dado nome X509"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "Só processar timeouts de pings se existirem rotas"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Instâncias OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Optimizar as escritas TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Registos para o syslog e não passar a daemon"
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr "Ficheiro PKCS#12 com chaves"
-
-msgid "Pass environment variables to script"
-msgstr "Passar variaveis de ambiente ao script"
-
-msgid "Persist replay-protection state"
-msgstr "Manter persistência da protecção replay"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Manter ou não o conjunto de subredes"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Pingar o remoto a cada n segundos sobre a porta TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Proxy timeout in seconds"
-msgstr "Timeout do proxy em segundos"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Enviar uma opção ifconfig ao remoto"
-
-msgid "Push options to peer"
-msgstr "Enviar opções ao remoto"
-
-msgid "Query management channel for private key"
-msgstr "Solicitar chave privada ao canal de gestão"
-
-msgid "Randomly choose remote server"
-msgstr "Escolher o server remoto aleatoriamente"
-
-msgid "Refuse connection if no custom client config"
-msgstr "Recusar ligações de clientes que não tenham configurações "
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Mapear os sinais SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Hostname endereço IP remoto"
-
-msgid "Remote ping timeout"
-msgstr "Timeout do ping remoto"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Renegociar chave do canal de dados após n bytes "
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Renegociar chave do canal de dados após n pacotes"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "Renegociar chave do canal de dados após n segundos"
-
-msgid "Replay protection sliding window size"
-msgstr "Tamanho da janela de protecção conta replay"
-
-msgid "Require explicit designation on certificate"
-msgstr "Requerer designação específica no certificado"
-
-msgid "Require explicit key usage on certificate"
-msgstr "Requerer utilização explicita de utilização de chave no certificado"
-
-msgid "Restart after remote ping timeout"
-msgstr "Reiniciar após timeout do ping remoto"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Timeout de retransmissão no canal de controlo TLS"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Tentar infinitamente sempre que existam erros de proxy HTTP"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Tentar continuamente a ligação quando existirem erros de proxy Socks"
-
-msgid "Route subnet to client"
-msgstr "Encaminhar rota da subrede para o cliente"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Executar via inetd ou xinetd"
-
-msgid "Run script cmd on client connection"
-msgstr "Executar script quando o cliente ligar"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Executar script quando o cliente desligar"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Executar scripts de abertura/activação para todos os reinicios"
-
-msgid "Send notification to peer on disconnect"
-msgstr "Notificar remoto ao desligar"
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr "Assumir GID para o grupo"
-
-msgid "Set TCP/UDP MTU"
-msgstr "Definir o MTU TCP/UDP"
-
-msgid "Set UID to user"
-msgstr "Assumir UID para o utilizador"
-
-msgid "Set aside a pool of subnets"
-msgstr "Reservar um conjunto de subredes"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Definir opções extra para o proxy HTTP"
-
-msgid "Set output verbosity"
-msgstr "Definir verbosidade do registo"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr "Definir tamanho das tabelas hash de endereços reais e virtuais"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Definir o buffer de recepção TCP/UDP"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Definir o buffer de envio TCP/UDP"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Definir o tamanho da queue de transmissão tun/tap"
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr "Definir o MTU do dispositivo tun/tap"
-
-msgid "Set tun/tap device overhead"
-msgstr "Definir o overhead do dispositivo tun/tap"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Definir tecto do MSS TCP"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Restringir a largura de banda ao remoto"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Comando shell a executar após abertura do dispositivo tun"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Comando shell a executar após fecho do dispositivo tun"
-
-msgid "Shell command to verify X509 name"
-msgstr "Comando shell para verificar o nome X509"
-
-msgid "Silence the output of replay warnings"
-msgstr "Silenciar o output dos avisos de replay"
-
-msgid "Size of cipher key"
-msgstr "Tamanho da chave de cifra"
-
-msgid "Specify a default gateway for routes"
-msgstr "Especificar uma gateway para as rotas"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Iniciar o OpenVPN em estado de hibernação"
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr "Iniciado"
-
-msgid "Status file format version"
-msgstr "Versão de formato do ficheiro de estado"
-
-msgid "Switch to advanced configuration »"
-msgstr "Mudar para configuração avançada"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Porta TCP/UDP para local e remoto"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Porta TCP/UDP para local (predefinição=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Porta TCP/UDP para remoto (predefinição=1194)"
-
-msgid "TLS cipher"
-msgstr "Cifra TLS"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "Passthrough TOS (aplicavel apenas a IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Directório temporário para ficheiro de retorno de ligação-cliente"
-
-msgid "Timeframe for key exchange"
-msgstr "Janela temporal para troca de chaves"
-
-msgid "Type of used device"
-msgstr "Tipo de dispositivo utilizado"
-
-msgid "Use fast LZO compression"
-msgstr "Usar compressão LZO rápida"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Usar endereços individuais em vez de subredes /30"
-
-msgid "Use protocol"
-msgstr "Usar protocolo"
-
-msgid "Use tun/tap device node"
-msgstr "Utilizar dispositivo tun/tap"
-
-msgid "Use username as common name"
-msgstr "Usar o username como nome comum"
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr "Escrever registo para o ficheiro"
-
-msgid "Write process ID to file"
-msgstr "Escrever PID no ficheiro"
-
-msgid "Write status to file every n seconds"
-msgstr "Escrever estado para ficheiro a cada n segundos"
-
-msgid "no"
-msgstr "não"
-
-msgid "tun/tap device"
-msgstr "Dispositivo tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr "Timeout de inactividade tun/tap"
-
-msgid "yes (%i)"
-msgstr "sim (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "Mudar para configuração básica"
diff --git a/po/pt/p2pblock.po b/po/pt/p2pblock.po
deleted file mode 100644
index 00cccc8..0000000
--- a/po/pt/p2pblock.po
+++ /dev/null
@@ -1,28 +0,0 @@
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/pt/p910nd.po b/po/pt/p910nd.po
deleted file mode 100644
index 083ddc4..0000000
--- a/po/pt/p910nd.po
+++ /dev/null
@@ -1,45 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Bidirectional mode"
-msgstr "Modo bidirecional"
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Primeiro você deve instalar os pacotes para obter suporte USB (kmod-usb-"
-"printer) ou porta paralela (kmod-lp)."
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr "P910nd - Servidor de impressão"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr "p910nd escuta na porta 910+N. Ex. 9100 para a primeira impressora."
diff --git a/po/pt/pbx-voicemail.po b/po/pt/pbx-voicemail.po
deleted file mode 100644
index be25f0b..0000000
--- a/po/pt/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/pt/pbx.po b/po/pt/pbx.po
deleted file mode 100644
index de74ec9..0000000
--- a/po/pt/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/pt/polipo.po b/po/pt/polipo.po
deleted file mode 100644
index 6129550..0000000
--- a/po/pt/polipo.po
+++ /dev/null
@@ -1,295 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: 2009-05-20 11:08+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr "Clientes permitidos"
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"É suportada a autenticação basica HTTP. Indique username e password no "
-"formato username:password."
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr "Endereço do servidor DNS"
-
-msgid "Delete cache files time"
-msgstr "Tempo para remoção dos ficheiros de cache"
-
-msgid "Disk cache location"
-msgstr "Localização da cache em disco"
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Activar se a cache (proxy) for partilhada por multiplos utilizadores."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Tamanho do primeiro segmento PMM (em bytes)"
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Quanta memória RAM deverá ser usada pelo polipo para a sua cache."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "Tamanho da cache em RAM (bytes)"
-
-msgid "Listen address"
-msgstr "Endereço local"
-
-msgid "Listen port"
-msgstr "Porta local"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Local onde o polipo guardará permanentemente os ficheiros de cache. É "
-"recomendada a utilização de dispositivos de armazenamento remoto devido ao "
-"grande crescimento da cache. Deixe em branco para desactivar a cache em "
-"disco."
-
-msgid "Log file location"
-msgstr "Localização do ficheiro de registo"
-
-msgid "Log to syslog"
-msgstr "Registar para o syslog"
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr "Cache em disco"
-
-msgid "PMM segments size (in bytes)"
-msgstr "Tamanho do segmento PMM (em bytes)"
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr "Endereço do proxy de hierarquia superior."
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Endereço do proxy de hierarquia superior (no formato host:porta), ao qual o "
-"polipo irá encaminhar os seus pedidos."
-
-msgid "Parent proxy authentication"
-msgstr "Autenticação em cache de hierarquia superior"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "O polipo é um proxy web ligeiro e rápido."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Multiplexagem simples"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"A multiplexagem simples (PMM) consiste na simulação de multiplexagem através "
-"da requesição de um pedido em multiplos segmentos. O método tenta baixar a "
-"latencia causada pela debilidade do protocolo HTTP. Nota: alguns sites web "
-"não funcionam com a activação de PMM."
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr "Pedidos ao DNS através de hostname"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr "Pedidos IPv6 ao DNS"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Define o endereço do servidor de DNS a usar, caso pretenda que o polipo "
-"utilize um servidor alternativo ao do sistema."
-
-msgid "Shared cache"
-msgstr "Cache partilhada"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Tamanho do primeiro segmento PMM. Se não estiver definido, reverte para o "
-"dobro do tamanho do segmento PMM."
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr "Categoria dos eventos polipo no registo do sistema"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"O interface no qual o polipo será activado. Para activar em todos os "
-"endereços, use 0.0.0.0 ou :: (IPv6)."
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Tamanho de trancagem dos ficheiros de cache (bytes)"
-
-msgid "Truncate cache files time"
-msgstr "Tempo de trancagem dos ficheiros de cache"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"É recomendado o recurso a sistemas de armazenamento de ficheiros externos, "
-"devido ao rápido crescimento do ficheiro de registo."
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid ""
-#~ "To enable polipo on-disk cache cleaning (highly recommended), you should "
-#~ "add a cron job in Scheduled Tasks services that will execute /usr/sbin/"
-#~ "polipo_purge script. For example to perform disk cache cleanup every day "
-#~ "at 6:00 in the morning you should add the following line in Scheduled "
-#~ "Tasks \"0 6 * * *\\t/usr/sbin/polipo_purge\" (without quotes)."
-#~ msgstr ""
-#~ "Para activar a limpeza de cache em disco (altamente recomendado), deve "
-#~ "acrescentar uma tarefa cron (\"Serviços\") que execute o script /usr/sbin/"
-#~ "polipo_purge. Como exemplo, para executar uma limpeza da cache "
-#~ "diariamente pelas 06H00 deve acrescentar a seguinte linha: \"0 6 * * * /"
-#~ "usr/sbin/polipo_purge\" (sem as aspas)."
-
-#~ msgid ""
-#~ "Size to which cached files should be truncated. (default value: 1048576)"
-#~ msgstr ""
-#~ "Tamanho com o qual devem ser trancados os ficheiros da cache. (valor pre-"
-#~ "definido: 1048576)"
-
-#~ msgid ""
-#~ "Time after which cached files will be truncated. (default value: 4d12h)"
-#~ msgstr ""
-#~ "Tempo após o qual os ficheiros de cache serão trancados. (valor pre-"
-#~ "definido: 4d12h)"
-
-#~ msgid "Time after which cached files will be deleted. (default value: 32d)"
-#~ msgstr ""
-#~ "Tempo apos o qual os ficheiros de cache serão removidos. (valor pré-"
-#~ "definido: 32d)"
-
-#~ msgid "General"
-#~ msgstr "Geral"
-
-#~ msgid ""
-#~ "When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-#~ "that are allowed to connect. The format is IP address or network address "
-#~ "(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-#~ msgstr ""
-#~ "Quando o endereço de listen fôr 0.0.0.0 (IPv4) ou :: (IPv6), deve listar "
-#~ "os clientes que tiverem permissão para ligação. O formato é endereço de "
-#~ "host ou endereço de rede (192.168.1.123, 192.168.1.0/24, "
-#~ "2001:660:116::/48 (IPv6))."
-
-#~ msgid ""
-#~ "false = Do not query IPv6; reluctantly = Query both, prefer IPv4; happily "
-#~ "= Query both, prefer IPv6; true = Query only IPv6"
-#~ msgstr ""
-#~ "false = Não pedir IPv6; reluctantly=Pedir ambos e preferir IPv4; "
-#~ "happily=Pedir ambos, preferir IPv6; true=Pedir apenas IPv6"
-
-#~ msgid ""
-#~ "false = Never use system DNS resolver; reluctantly = Query DNS directly, "
-#~ "if DNS server is unavailable fail to system DNS resolver; happily = Query "
-#~ "DNS directly, if host could not be found fallback to system DNS resolver; "
-#~ "true = Always use system DNS resolver"
-#~ msgstr ""
-#~ "false=nunca usar o resolver do sistema; reluctantly=pedir DNS "
-#~ "directamente, se o servidor DNS estiver indisponivel recorrer do resolver "
-#~ "DNS do sistema; happily=pedir DNS directamente, se o host nao for "
-#~ "encontrado, recorrer ao resolver DNS do sistema; true=Usar sempre o "
-#~ "resolver DNS do sistema"
-
-#~ msgid "Port on which Polipo will listen. (default value: 8123)"
-#~ msgstr "Porta local na qual o polipo será activado. (pre-definido: 8123)"
-
-#~ msgid "polipo_pmm_pmmsize_desc"
-#~ msgstr ""
-#~ "Para activar PMM, o tamanho do segmento PMM deve ser definido para um "
-#~ "qualquer valor positivo."
diff --git a/po/pt/qos.po b/po/pt/qos.po
deleted file mode 100644
index 476f226..0000000
--- a/po/pt/qos.po
+++ /dev/null
@@ -1,128 +0,0 @@
-#  qos.po
-#  generated from ./applications/luci-qos/luasrc/i18n/qos.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-#, fuzzy
-msgid "Calculate overhead"
-msgstr "Calcular Overhead"
-
-#, fuzzy
-msgid "Classification Rules"
-msgstr "Classificação"
-
-#, fuzzy
-msgid "Classification group"
-msgstr "Classificação"
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr "Link para download"
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-#, fuzzy
-msgid "Half-duplex"
-msgstr "Link para upload"
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-#, fuzzy
-msgid "Ports"
-msgstr "Prioridade"
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr "Qualidade de Serviço"
-
-msgid "Service"
-msgstr ""
-
-#, fuzzy
-msgid "Source host"
-msgstr "Endereço de origem"
-
-#, fuzzy
-msgid "Target"
-msgstr "Endereço de destino"
-
-msgid "Uplink"
-msgstr "Link para upload"
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-#, fuzzy
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Com QoS você pode priozirar o tráfego da rede selecionada por endereços, "
-"portas ou serviços."
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr "expressa"
-
-msgid "low"
-msgstr "baixa"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "alta"
-
-msgid "qos_connbytes"
-msgstr ""
-
-#~ msgid "Prioritization"
-#~ msgstr "Priorização"
-
-#~ msgid "source network / source host"
-#~ msgstr "rede de origem / host de origem"
-
-#~ msgid "target network / target host"
-#~ msgstr "rede de destino / host de destino"
-
-#~ msgid "portrange"
-#~ msgstr "faixa de portas"
-
-#~ msgid "Bytes sent"
-#~ msgstr "Bytes enviados"
diff --git a/po/pt/radvd.po b/po/pt/radvd.po
deleted file mode 100644
index 8e0fb01..0000000
--- a/po/pt/radvd.po
+++ /dev/null
@@ -1,368 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-21 04:06+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/pt/rrdtool.po b/po/pt/rrdtool.po
deleted file mode 100644
index 780e0a0..0000000
--- a/po/pt/rrdtool.po
+++ /dev/null
@@ -1,357 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: 2009-05-20 12:06+0200\n"
-"Last-Translator: Jose Monteiro <jm@unimos.net>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Wireless - Relação Sinal/Ruido"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Nivel de Ruido"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Forca do Sinal"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Wireless - Qualidade do Sinal"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Qualidade do Sinal"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: Tempo de resposta ICMP"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Firewall - Pacotes Processados"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "Pacote/s"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Cadeia \"%di\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - Transferencia na %pi"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "Bytes/s"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Bytes (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - Pacotes na %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "Packets/s"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Processado (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Dropado    (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Erros      (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - Multicast na %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "Pacote/s"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Pacotes"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - Colisoes na %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "Colisao(es)"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Colisoes"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - Erros na %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "Erro/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Processos"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Processo/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Processo %pi - tempo usado da cpu"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffies"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "sistema"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "utilizador"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Processo %pi - threads e processos"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "Contagem"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Prcesso %pi - pagina de erros"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Pagina de erros"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "pagina de erros"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Processo %pi - tamanho da memoria virtual"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bytes"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "memoria virtual"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Usado no Processado #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Transferencia na %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "Bytes/s"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Pacotes na %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "Pacote/s"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: Ligações TCP na Porta %pi"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "Ligação(ões)"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Utilizacao de Espaco em Disco em %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Bytes"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: Interrupcoes"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "Erro/s"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: Carga do Sistema"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Carga"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 min"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 min"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 min"
diff --git a/po/pt/samba.po b/po/pt/samba.po
deleted file mode 100644
index 8fa45e5..0000000
--- a/po/pt/samba.po
+++ /dev/null
@@ -1,95 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-#, fuzzy
-msgid "Allow guests"
-msgstr "Permitir Convidados"
-
-#, fuzzy
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Usuários do sistema poderão acessar seu diretório home através dos "
-"compartilhamentos de rede."
-
-#, fuzzy
-msgid "Allowed users"
-msgstr "Usuários Permitidos"
-
-#, fuzzy
-msgid "Create mask"
-msgstr "Criar Máscara"
-
-msgid "Description"
-msgstr "Descrição"
-
-#, fuzzy
-msgid "Directory mask"
-msgstr "Máscara do Diretório"
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "Mask for new directories"
-msgstr "Máscara para novos diretórios"
-
-msgid "Mask for new files"
-msgstr "Máscara para novos arquivos"
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr "Compartilhamentos de Rede"
-
-msgid "Path"
-msgstr ""
-
-#, fuzzy
-msgid "Read-only"
-msgstr "Somente Leitura"
-
-msgid "Share home-directories"
-msgstr "Compartilhar diretórios home"
-
-msgid "Shared Directories"
-msgstr "Diretórios Compartilhados"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr "Grupo de Trabalho"
-
-#~ msgid "Shared Directory"
-#~ msgstr "Diretório Compartilhado"
-
-#~ msgid "Physical Path"
-#~ msgstr "Caminho Físico"
-
-#~ msgid "optional"
-#~ msgstr "opcional"
diff --git a/po/pt/splash.po b/po/pt/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/pt/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/pt/statistics.po b/po/pt/statistics.po
deleted file mode 100644
index 45564fd..0000000
--- a/po/pt/statistics.po
+++ /dev/null
@@ -1,666 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Action (target)"
-msgstr "Ação (destino)"
-
-msgid "Add command for reading values"
-msgstr "Adicionar comando para leitura de valores"
-
-msgid "Add matching rule"
-msgstr "Adicionar regra"
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr "Adicionar o comando de notificação"
-
-msgid "Base Directory"
-msgstr "Diretório Base"
-
-msgid "Basic monitoring"
-msgstr "Monitoramento básico"
-
-msgid "CPU Plugin Configuration"
-msgstr "Configuração do plugin CPU"
-
-msgid "CSV Output"
-msgstr "Formato CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Configuração do plugin CSV"
-
-msgid "Cache collected data for"
-msgstr "Cache dos dados coletados"
-
-msgid "Cache flush interval"
-msgstr "Intervalo de limpeza do cache"
-
-msgid "Chain"
-msgstr "Cadeia"
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Configurações do Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd é um pequeno daemon que coleta dados de várias fontes através de "
-"diferentes plugins. Nesta página você pode alterar as configurações gerais "
-"do daemon collectd."
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr "Configuração do plugin DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Configuração do plugin DNS"
-
-msgid "Data collection interval"
-msgstr "Intervalo da coleta de dados"
-
-msgid "Datasets definition file"
-msgstr "Arquivo com a definição de dados"
-
-msgid "Destination ip range"
-msgstr "IP de destino"
-
-msgid "Directory for collectd plugins"
-msgstr "Diretório para os plugins do collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Diretório para sub-configurações"
-
-msgid "Disk Plugin Configuration"
-msgstr "Configuração do plugin Disco"
-
-msgid "Disk Space Usage"
-msgstr "Utilização de espaço em disco"
-
-msgid "Disk Usage"
-msgstr "Utilização do Disco"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Mostrar intervalo »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Configuração do plugin E-Mail"
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable this plugin"
-msgstr "Habilitar este plugin"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Configuração do plugin Exec"
-
-msgid "Filter class monitoring"
-msgstr "Monitoramento das Classes de Filtros"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr "Limpar cache após"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "Transmissão entre o endereço de escuta e dos servidores"
-
-msgid "Graphs"
-msgstr "Gráficos"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Aqui você pode definir comandos externos que serão iniciados pelo collectd a "
-"fim de ler determinados valores. Os valores serão lidos a partir do stdout."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Aqui você pode definir os comandos externos que serão iniciados pelo "
-"collectd quando determinados valores limite forem  atingidos. Os valores "
-"passados ao comando serão enviados para o stdin."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Aqui você pode definir diversos critérios para as regras iptables "
-"selecionadas serem monitoradas."
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr "Configuração do plugin IRQ"
-
-msgid "Ignore source addresses"
-msgstr "Ignorar endereços de origem"
-
-msgid "Incoming interface"
-msgstr "Interface de entrada"
-
-msgid "Interface Plugin Configuration"
-msgstr "Configuração do plugin Interface"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interrupts"
-msgstr "Interrupções"
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr "Configuração do plugin Iptables"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr "Endereço de escuta do Host"
-
-msgid "Listen port"
-msgstr "Porta de escuta"
-
-msgid "Listener interfaces"
-msgstr "Escutar na(s) interface(s)"
-
-msgid "Load Plugin Configuration"
-msgstr "Configuração do plugin carga"
-
-msgid "Maximum allowed connections"
-msgstr "Máximo de conexões permitidas"
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr "Monitorar todas as portas locais"
-
-msgid "Monitor devices"
-msgstr "Monitorar dispositivos"
-
-msgid "Monitor disks and partitions"
-msgstr "Monitoras discos e partições"
-
-msgid "Monitor filesystem types"
-msgstr "Monitorar tipos de sistemas de arquivos"
-
-msgid "Monitor hosts"
-msgstr "Monitorar os hosts"
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr "Monitorar interrupções"
-
-msgid "Monitor local ports"
-msgstr "Monitorar as portas locais"
-
-msgid "Monitor mount points"
-msgstr "Monitorar pontos de montagem"
-
-msgid "Monitor processes"
-msgstr "Monitorar processos"
-
-msgid "Monitor remote ports"
-msgstr "Monitorar portas remotas"
-
-msgid "Name of the rule"
-msgstr "Nome da regra"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Configuração do plugin Netlink"
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "Network Plugin Configuration"
-msgstr "Configuração do plugin Rede"
-
-msgid "Network plugins"
-msgstr "Plugins de rede"
-
-msgid "Network protocol"
-msgstr "Protocolo de rede"
-
-msgid "Number of threads for data collection"
-msgstr "Número de threads para o coletor de dados"
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr "Somente criar RRAs de média"
-
-msgid "Options"
-msgstr "Opções"
-
-msgid "Outgoing interface"
-msgstr "Interface de saída"
-
-msgid "Output plugins"
-msgstr "Plugins de saída"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Configuração do plugin Ping"
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Processos"
-
-msgid "Processes Plugin Configuration"
-msgstr "Configuração do plugin Processos"
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Processador"
-
-msgid "Qdisc monitoring"
-msgstr "Monitoramento do Qdisc"
-
-msgid "RRD XFiles Factor"
-msgstr "Arquivos RRD XFiles Factor"
-
-msgid "RRD heart beat interval"
-msgstr "Intervalo entre duas atualizações"
-
-msgid "RRD step interval"
-msgstr "Intervalo de atualização"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Configuração do plugin RRDTool"
-
-msgid "Rows per RRA"
-msgstr "Linhas por RRA"
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Segundos"
-
-msgid "Server host"
-msgstr "IP/Hostname do servidor"
-
-msgid "Server port"
-msgstr "Porta do servidor"
-
-msgid "Shaping class monitoring"
-msgstr "Monitoramento das Classes de Shaping"
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr "IP de origem"
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr "Diretório de armazenamento"
-
-msgid "Storage directory for the csv files"
-msgstr "Diretório para armazenamento dos arquivos csv"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Armazenar os valores dos dados como taxas em vez de valores absolutos"
-
-msgid "Stored timespans"
-msgstr "Intervalos armazenados"
-
-msgid "System Load"
-msgstr "Carga do Sistema"
-
-msgid "System plugins"
-msgstr "Plugis de Sistema"
-
-msgid "TCP Connections"
-msgstr "Conexões TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Configuração do plugin TCPConns"
-
-msgid "TTL for network packets"
-msgstr "TTL para os pacotes de rede"
-
-msgid "TTL for ping packets"
-msgstr "TTL para os pacotes do ping"
-
-msgid "Table"
-msgstr "Tabela"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-"O plugin cpu coleta as estatísticas básicas sobre o uso do processador."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"O plugin csv armazena os dados coletados em um arquivo no formato csv para "
-"um futuro processamento por outros programas."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"O plugin df coleta estatísticas sobre a utilização de espaço em disco em "
-"diferentes dispositivos, pontos de montagem ou tipos de sistemas de arquivos."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"O plugin disco coleta estatísticas de uso detalhadas das partições "
-"selecionadas ou discos inteiros."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"O plugin dns coleta estatísticas detalhadas sobre o tráfego do dns nas "
-"interfaces selecionadas."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"O plugin de email cria um socket unix que pode ser usado para transmitir "
-"estatísticas de email o daemon collectd. Este plugin é essencialmente "
-"destinado a ser utilizado em conjunto com o plugin Mail::SpamAssasin::"
-"Plugin::Collectd mas pode ser utilizado de outras maneiras também."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"O plugin exec inicia comandos externos para leitura de valores ou notificar "
-"processos externos quando um determinado valor limite for atingido."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"O plugin interface plugin coleta estatísticas sobre o tráfego das interfaces "
-"selecionadas."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"O plugin iptables irá monitorar as regras de firewall selecionadas e coletar "
-"informações sobre pacotes e bytes processados pela regra."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"O plugin irq irá monitorar a taxa de erros por segundo de cada interrupção "
-"selecionada. Se nenhuma interrupção for selecionada então todas as "
-"interrupções serão monitoradas."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "O plugin carga coleta estatísticas gerais sobre a carga do sistema."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"O plugin Netlink coleta informações detalhadas como qdisc-, classe- e filtro "
-"de estatísticas das interfaces selecionadas."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"O plugin rede fornece informações de rede baseadas na comunicação entre as "
-"diferentes instâncias do collectd. O Collectd pode operar tanto no modo "
-"cliente quanto no modo servidor. No modo cliente os dados coletados "
-"localmente são transferidos para um servidor collectd, no modo de servidor a "
-"instância local recebe dados de outros hosts."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"O plugin ping irá enviar pacotes ICMP to tipo echo aos hosts selecionados e "
-"medir o tempo de resposta para cada host."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"O plugin processo coleta informações como o tempo da cpu, página falhas e "
-"uso de memória dos processos selecionados."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"O plugin rrdtool armazena os dados coletados no arquivo de banco de dados "
-"rrd.<br /><br /><strong>Aviso: A má configuração desses valores, resultará "
-"em um valor muito elevado no consumo de memória no diretório temporário. "
-"Isso pode tornar o equipamento inutilizável!</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"As estatísticas são baseadas no <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> e é utilizado o <a href=\"http://oss.oetiker.ch/rrdtool/"
-"\">RRD Tool</a> para renderização das imagens à partir dos dados coletados."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"O plugin tcpconns coleta informações sobre as conexões TCP abertas das "
-"portas selecionadas."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"O plugin unixsock cria um socket unix, que pode ser usado para ler os dados "
-"coletados a partir de uma instância do collectd."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Esta seção define em quais interfaces o collectd irá aguardar para receber "
-"conexões."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Esta seção define para qual servidor os dados coletados localmente serão "
-"enviados."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Tentar encontrar o nome do host completo (FQDN)"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Configuração do plugin Unixsock"
-
-msgid "Used PID file"
-msgstr "Arquivo PID usado"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr "Monitoramento no modo verbose"
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr "ex. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "ex. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "ex. rejeitar-com tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "max. 16 caract."
-
-msgid "reduces rrd size"
-msgstr "reduzir o tamanho do rrd"
-
-msgid "seconds; multiple separated by space"
-msgstr "segundos; vários valores, separar com espaço"
-
-msgid "server interfaces"
-msgstr "Interfaces do servidor"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "O plugin wireless coleta estatísticas sobre o nível de sinal wireless, o "
-#~ "ruído e qualidade."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Configuração do plugin Wireless"
diff --git a/po/pt/tinyproxy.po b/po/pt/tinyproxy.po
deleted file mode 100644
index 63ed732..0000000
--- a/po/pt/tinyproxy.po
+++ /dev/null
@@ -1,331 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr "Nível do log"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr "Max. servidores sobressalentes"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr "Min. servidores sobressalentes"
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr "Rejeitar o acesso"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr "Host de destino"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy é um pequeno e rápido Proxy-HTTP(S) sem suporte à cache"
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr "Via proxy"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
-
-#~ msgid "Allow access from"
-#~ msgstr "Permitir acesso de"
-
-#~ msgid "Allowed headers for anonymous proxy"
-#~ msgstr "Cabeçalhos permitidos para proxy anônimo"
-
-#~ msgid "Bind outgoing traffic to address"
-#~ msgstr "Associar o tráfego de saída ao endereço"
-
-#~ msgid "Ports allowed for CONNECT method"
-#~ msgstr "Portas permitidas para o método CONNECT "
-
-#~ msgid "0 = disabled, empty = all"
-#~ msgstr "0 = desativado, vazio = todas"
-
-#~ msgid "Error document"
-#~ msgstr "Documento de erro"
-
-#~ msgid "Filter list"
-#~ msgstr "Lista de filtros"
-
-#~ msgid "Case sensitive filters"
-#~ msgstr "Filtros \"case sensitive\""
-
-#~ msgid "Filter list is a whitelist"
-#~ msgstr "A lista de filtros é uma lista branca"
-
-#~ msgid "Extended regular expression filters"
-#~ msgstr "Filtros com suporte à expressões regulares"
-
-#~ msgid "Filter URLs instead of domains"
-#~ msgstr "Filtrar URLs em vez de domínios"
-
-#~ msgid "Listen on address"
-#~ msgstr "Escutar no endereço"
-
-#~ msgid "Logfile"
-#~ msgstr "Arquivo de log"
-
-#~ msgid "Maximum number of clients"
-#~ msgstr "Número máximo de clientes"
-
-#~ msgid "Maximum requests per thread"
-#~ msgstr "Máximo de solicitações por thread"
-
-#~ msgid "Spare servers to start with"
-#~ msgstr "Servidores sobressalentes iniciar com"
-
-#~ msgid "Statistic document"
-#~ msgstr "Documento de estatísticas"
-
-#~ msgid "Write to syslog"
-#~ msgstr "Escrever para syslog"
-
-#~ msgid "Connection Timeout"
-#~ msgstr "Timeout de conexão"
-
-#~ msgid "Value of Via-Header"
-#~ msgstr "Valor do cabeçalho \"Via-Header\""
-
-#~ msgid "Include client IP"
-#~ msgstr "Incluir o IP do cliente"
-
-#~ msgid "Upstream Control"
-#~ msgstr "Controle de Upstream"
-
-#~ msgid "Type"
-#~ msgstr "Tipo"
-
-#~ msgid "Upstream Proxy"
-#~ msgstr "Proxy para Upstream"
diff --git a/po/pt/transmission.po b/po/pt/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/pt/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/pt/upnp.po b/po/pt/upnp.po
deleted file mode 100644
index ea74caf..0000000
--- a/po/pt/upnp.po
+++ /dev/null
@@ -1,159 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr "Link para download"
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr "Enable secure mode"
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPNP permite os clientes da rede local automaticamente configurar o roteador."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr "Plug & Play Universal"
-
-msgid "Uplink"
-msgstr "Link para Upload"
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid "Log output"
-#~ msgstr "Log de saída"
-
-#~ msgid ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
-#~ msgstr ""
-#~ "O UPNP deve ser ativado apenas se for absolutamente necessário, pois ele "
-#~ "pode resultar em elevados riscos de segurança para sua rede."
diff --git a/po/pt/ushare.po b/po/pt/ushare.po
deleted file mode 100644
index ce7ef72..0000000
--- a/po/pt/ushare.po
+++ /dev/null
@@ -1,49 +0,0 @@
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-26 19:03+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Translate Toolkit 1.1.1\n"
-
-msgid "Content directories"
-msgstr "Diretórios de conteúdo"
-
-msgid "Disable telnet console"
-msgstr "Desativar console telnet"
-
-msgid "Disable webinterface"
-msgstr "Desativar interface web"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "Opções"
-
-msgid "Servername"
-msgstr "Nome do servidor"
-
-msgid "Settings"
-msgstr "Configurações"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/pt/uvc_streamer.po b/po/pt/uvc_streamer.po
deleted file mode 100644
index fc111f0..0000000
--- a/po/pt/uvc_streamer.po
+++ /dev/null
@@ -1,38 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/pt/vnstat.po b/po/pt/vnstat.po
deleted file mode 100644
index 9d23778..0000000
--- a/po/pt/vnstat.po
+++ /dev/null
@@ -1,59 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-16 20:54+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/pt/voice_core.po b/po/pt/voice_core.po
deleted file mode 100644
index 8f7b27a..0000000
--- a/po/pt/voice_core.po
+++ /dev/null
@@ -1,15 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/pt/voice_diag.po b/po/pt/voice_diag.po
deleted file mode 100644
index 3cd1c9f..0000000
--- a/po/pt/voice_diag.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/pt/watchcat.po b/po/pt/watchcat.po
deleted file mode 100644
index ceafe5d..0000000
--- a/po/pt/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/pt/wol.po b/po/pt/wol.po
deleted file mode 100644
index 811596c..0000000
--- a/po/pt/wol.po
+++ /dev/null
@@ -1,49 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2010-04-19 00:29+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/pt/wshaper.po b/po/pt/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/pt/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/pt_BR/ahcp.po b/po/pt_BR/ahcp.po
deleted file mode 100644
index 592cc64..0000000
--- a/po/pt_BR/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-26 23:57+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "Servidor AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP é um protocolo de autoconfiguração para redes IPv6 ou IPv6/IPv4 "
-"projetado para ser usado no lugar da \"descoberta de roteador\" ou DHCP em "
-"redes onde é difícil ou impossível configurar um servidor em cada camada de "
-"enlace de domínio de broadcast, como exemplo as redes móvel ad-hoc."
-
-msgid "Active AHCP Leases"
-msgstr "Atribuições AHCP Ativas"
-
-msgid "Address"
-msgstr "Endereço"
-
-msgid "Advanced Settings"
-msgstr "Configurações Avançadas"
-
-msgid "Age"
-msgstr "Tempo de vida"
-
-msgid "Announced DNS servers"
-msgstr "Servidores DNS anunciados"
-
-msgid "Announced NTP servers"
-msgstr "Servidores NTP anunciados"
-
-msgid "Announced prefixes"
-msgstr "Prefixos anunciados"
-
-msgid "Collecting data..."
-msgstr "Coletando dados..."
-
-msgid "Forwarder"
-msgstr "Forwarder"
-
-msgid "General Setup"
-msgstr "Configurações Gerais"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 only"
-msgstr "Apenas IPv4"
-
-msgid "IPv6 only"
-msgstr "Apenas IPv6"
-
-msgid "Lease directory"
-msgstr "Diretório de atribuições"
-
-msgid "Lease validity time"
-msgstr "Tempo de validade da atribuição"
-
-msgid "Log file"
-msgstr "Arquivo de registro"
-
-msgid "Multicast address"
-msgstr "Endereço multicast"
-
-msgid "Operation mode"
-msgstr "Modo de operação"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Protocol family"
-msgstr "Família de protocolos"
-
-msgid "Served interfaces"
-msgstr "Interfaces configuradas"
-
-msgid "Server"
-msgstr "Servidor"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Especifica os servidores NTP IPv4 e IPv6 anunciados"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Especifica os servidores de nomes IPv4 e IPv6 anunciados"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-"Especifica os prefixos de rede IPv4 e IPv6, em notação CIDR, anunciados"
-
-msgid "The AHCP Service is not running."
-msgstr "O serviço AHCP está parado"
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "O serviço AHCP esta executando com o ID %s."
-
-msgid "There are no active leases."
-msgstr "Não existe concessões ativas."
-
-msgid "Unique ID file"
-msgstr "Arquivo de identificador único"
diff --git a/po/pt_BR/asterisk.po b/po/pt_BR/asterisk.po
deleted file mode 100644
index 07d7052..0000000
--- a/po/pt_BR/asterisk.po
+++ /dev/null
@@ -1,691 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2011-10-18 22:20+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Opções Gerais do Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Diretório do AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Guardar em cache os arquivos de som durante a gravação"
-
-#~ msgid "Debug Level"
-#~ msgstr "Nível de detalhamento"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Desativar alguns avisos"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Guardar o core quando o programa estourar"
-
-#~ msgid "High Priority"
-#~ msgstr "Alta Prioridade"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Inicializar Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Usar Temporização Interna"
-
-#~ msgid "Log directory"
-#~ msgstr "Diretório de registos"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Número máximo de chamadas permitidas"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Carga máxima para deixar de aceitar novas chamadas"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Desativar cores no console"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Diretório de cache para arquivos de som"
-
-#~ msgid "The Group to run as"
-#~ msgstr "O grupo sob o qual o asterisk será executado"
-
-#~ msgid "The User to run as"
-#~ msgstr "O usuário sob o qual o asterisk será executado"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Directorio da spool de voicemail"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Prefixar o nome de sistema à UniquID"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr ""
-#~ "Construir os caminhos de transcode atraves de SLINEAR e não directamente"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Transmitir silencio SLINEAR durante a gravação de um canal"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Nível de Detalhamento"
-
-#~ msgid "Time Zone"
-#~ msgstr "Fuso Horário"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Seção do Plano de Marcação"
-
-#~ msgid "include"
-#~ msgstr "incluir"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Extensão do Plano de Discagem"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Opções Gerais do Plano de Discagem"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Permitir transferência"
-
-#~ msgid "Reinvite/redirect media connections"
-#~ msgstr "Reconvidar/redirecionar conexões multimídia"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Limpar variáveis globais"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "Encaminhamento do Plano de Discagem"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Conferência do Plano de Discagem"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Tempo do Plano de Discagem"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Correio de voz do Plano de Discagem"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Zonas do Plano de Discagem"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "Prefixo para adicionar aos planos de discagem correspondentes"
-
-#~ msgid "Match International prefix"
-#~ msgstr "Coincidir com o prefixo internacional"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Prefixo (0) para adicionar/remover para/de números internacionais"
-
-#~ msgid "localzone"
-#~ msgstr "zona local"
-
-#~ msgid "Match plan"
-#~ msgstr "Plano de combinação"
-
-#~ msgid "Connection to use"
-#~ msgstr "Conexão usada"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Mapeamentos de Tecla de Função"
-
-#~ msgid "Attended transfer key"
-#~ msgstr "Tecla de transferência assistida"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "Tecla de transferência cega"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Tecla para Desligar a chamada"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Tecla para Estacionar a chamada"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Recurso de Estacionamento"
-
-#~ msgid "ADSI Park"
-#~ msgstr "Estacionamento ADSI"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "Tempo limite (seg) da transferência assistida"
-
-#~ msgid "One touch record key"
-#~ msgstr "Tecla de gravação em um toque"
-
-#~ msgid "Name of call context for parking"
-#~ msgstr "Nome do contexto de chamada para o estacionamento"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Arquivo de som para tocar para o chamador estacionado"
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr "Tempo máximo (ms) entre os dígitos para ativação de recursos"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Método para Encontrar uma Vaga de Estacionamento"
-
-#~ msgid "parkedmusicclass"
-#~ msgstr "parkedmusicclass"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Toque o tom de cortesia para"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Habilitar Estacionamento"
-
-#~ msgid "Extension to dial to park"
-#~ msgstr "Extensão para discar para estacionar"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Tempo de estacionamento (seg)"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "faixa de extensões para o estacionamento de chamada"
-
-#~ msgid "Pickup extension"
-#~ msgstr "Extensão de captura"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Segundos para esperar entre os dígitos quando transferindo"
-
-#~ msgid "sound when attended transfer is complete"
-#~ msgstr "emitir som quando a transferência assistida estiver completa"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "Emitir som quando a transferência assistida falhar"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Recarregar a Configuração de Hardware"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Método de Reinicialização"
-
-#~ msgid "Parameter"
-#~ msgstr "Parâmetro"
-
-#~ msgid "Option type"
-#~ msgstr "Tipo de Opção"
-
-#~ msgid "User name"
-#~ msgstr "Nome do usuário"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Opções Gerais do Plano de Discagem"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Permitir Codificadores (codecs)"
-
-#~ msgid "Static"
-#~ msgstr "Estático"
-
-#~ msgid "Write Protect"
-#~ msgstr "Proteção à Escrita"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Conferência Encontre-me"
-
-#~ msgid "Admin PIN"
-#~ msgstr "PIN do Administrador"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "PIN da Conferência"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Opções Gerais da Conferência Encontre-me"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Número de buffers de 20ms que serão usados"
-
-#~ msgid "Modules"
-#~ msgstr "Módulos"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Aplicativo de Recepção de Alarmes"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Aplicativo de Autenticação"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "Garanta que o asterisk não salva o CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Verifique se o canal está disponível"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Escute em qualquer canal"
-
-#~ msgid "Control Playback Application"
-#~ msgstr "Controlar o Aplicativo de Reprodução"
-
-#~ msgid "Cuts up variables"
-#~ msgstr "Variáveis de Cortes"
-
-#~ msgid "Database access functions"
-#~ msgstr "Funções de acesso ao banco de dados"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Aplicativo de Discagem"
-
-#~ msgid "Virtual Dictation Machine Application"
-#~ msgstr "Aplicativo de Máquina de Ditado Virtual"
-
-#~ msgid "Directed Call Pickup Support"
-#~ msgstr "Suporte a Captura de Chamadas Direcionadas"
-
-#~ msgid "Extension Directory"
-#~ msgstr "Diretório de Extensão"
-
-#~ msgid "DISA (Direct Inward System Access) Application"
-#~ msgstr "Aplicativo DISA (Acesso Direto ao Sistema Interior)"
-
-#~ msgid "Dump channel variables Application"
-#~ msgstr "Descarregar Aplicativo de variáveis do canal"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Aplicativo de Eco Simples"
-
-#~ msgid "ENUM Lookup"
-#~ msgstr "Pesquisa ENUM"
-
-#~ msgid "Reevaluates strings"
-#~ msgstr "Reavaliar sequências de caracteres"
-
-#~ msgid "Executes applications"
-#~ msgstr "Executa aplicativos"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "Interface de aplicativo IVR externo"
-
-#~ msgid "Fork The CDR into 2 seperate entities"
-#~ msgstr "Bifurcar o CDR em duas entidades separadas"
-
-#~ msgid "Get ADSI CPE ID"
-#~ msgstr "Pegar o ID do CPE ADSI"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Rotinas de Gerenciamento e Grupo"
-
-#~ msgid "Encode and Stream via icecast and ices"
-#~ msgstr "Codificar e Transmitir através do icecast e ices"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Aplicativo de Transmissão de Imagem"
-
-# what is this black? Seems to be truncated!
-#~ msgid "Look up Caller*ID name/number from black"
-#~ msgstr "Buscar o Identificador de chamadas/nome/número do preto"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr "Buscar o Identificador de chamadas/nome/número do banco de dados"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Macros de extensão"
-
-#~ msgid "A simple math Application"
-#~ msgstr "Um Aplicativo simples de matemática"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "Aplicativo de soma de verificação MD5"
-
-#~ msgid "Digital Milliwatt (mu-law) Test Application"
-#~ msgstr "Aplicativo de Teste de Miliwatt (mu-law) Digital"
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Gravar uma ligação e mixar o áudio durante a gravação"
-
-#~ msgid "Call Parking and Announce Application"
-#~ msgstr "Aplicativo de Anúncio e Estacionamento de Chamada"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Aplicativo de Reprodução Trivial"
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Requer que seja informado um número de telefone"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "Enfileiramento Real da Chamada"
-
-#~ msgid "Random goto"
-#~ msgstr "Vá para aleatório"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Aplicativo de Leitura de Variável"
-
-#~ msgid "Read in a file"
-#~ msgstr "Ler em um arquivo"
-
-#~ msgid "Realtime Data Lookup/Rewrite"
-#~ msgstr "Escrita/Consulta de Dados em Tempo Real"
-
-#~ msgid "Trivial Record Application"
-#~ msgstr "Aplicativo de Gravação Trivial"
-
-#~ msgid "Say time"
-#~ msgstr "Dizer a hora"
-
-#~ msgid "Send DTMF digits Application"
-#~ msgstr "Aplicativo para Enviar dígitos DTMF"
-
-#~ msgid "Send Text Applications"
-#~ msgstr "Aplicativos para Enviar Texto"
-
-#~ msgid "Set CallerID Application"
-#~ msgstr "Aplicativo de Definir a Identificação da Chamada"
-
-# I guess there is something wrong with English here
-#~ msgid "CDR user field apps"
-#~ msgstr "Aplicativos do campo do usuário no CDR"
-
-#~ msgid "load => .so ; Set CallerID Name"
-#~ msgstr "Carregar => .so ; Definir o Nome na Identificação da Chamada"
-
-#~ msgid "load => .so ; Set CallerID Number"
-#~ msgstr "Carregar => .so ; Definir o Número na Identificação da Chamada"
-
-#~ msgid "Set RDNIS Number"
-#~ msgstr "Definir o Número do RDNIS"
-
-#~ msgid "Set ISDN Transfer Capability"
-#~ msgstr "Definir Capacidade de Transferência ISDN"
-
-#~ msgid "SMS/PSTN handler"
-#~ msgstr "Tratador do SMS/PSTN"
-
-#~ msgid "Hangs up the requested channel"
-#~ msgstr "Termina a ligação no canal requisitado"
-
-#~ msgid "Stack Routines"
-#~ msgstr "Rotinas de Empilhamento"
-
-#~ msgid "Generic System() application"
-#~ msgstr "Aplicativo de Sistema Genérico"
-
-#~ msgid "Playback with Talk Detection"
-#~ msgstr "Reprodução com Detecção de Conversa"
-
-#~ msgid "Interface Test Application"
-#~ msgstr "Aplicativo de Teste de Interface"
-
-#~ msgid "Transfer"
-#~ msgstr "Transferir"
-
-#~ msgid "TXTCIDName"
-#~ msgstr "TXTCIDName"
-
-#~ msgid "Send URL Applications"
-#~ msgstr "Aplicativo para Enviar URL"
-
-#~ msgid "Custom User Event Application"
-#~ msgstr "Aplicativo para Eventos do Usuário Personalizados"
-
-#~ msgid "Send verbose output"
-#~ msgstr "Enviar saída detalhada"
-
-#~ msgid "Voicemail"
-#~ msgstr "Correio de Voz"
-
-#~ msgid "Waits until first ring after time"
-#~ msgstr "Espere até o primeiro toque após tempo"
-
-#~ msgid "Wait For Silence Application"
-#~ msgstr "Aplicativo para Esperar Por Silêncio"
-
-#~ msgid "While Loops and Conditional Execution"
-#~ msgstr "Laços de Repetição e Execução Condicional"
-
-#~ msgid "Comma Separated Values CDR Backend"
-#~ msgstr "Serviço de CDR em Valores Separados por Vírgula"
-
-#~ msgid "Customizable Comma Separated Values CDR Backend"
-#~ msgstr "Serviço de CDR em Valores Separados por Vírgula Personalizável"
-
-#~ msgid "Asterisk Call Manager CDR Backend"
-#~ msgstr "Serviço de CDR de Gerenciamento de Chamadas Asterisk"
-
-#~ msgid "MySQL CDR Backend"
-#~ msgstr "Serviço de CDR em MySQL"
-
-#~ msgid "PostgreSQL CDR Backend"
-#~ msgstr "Serviço de CDR em PostgreSQL"
-
-#~ msgid "SQLite CDR Backend"
-#~ msgstr "Serviço de CDR em SQLite"
-
-#~ msgid "Agent Proxy Channel"
-#~ msgstr "Canal de Proxy do Agente"
-
-#~ msgid "Option chan_iax2"
-#~ msgstr "Opção chan_iax2"
-
-#~ msgid "Local Proxy Channel"
-#~ msgstr "Canal de Proxy Local"
-
-#~ msgid "Session Initiation Protocol (SIP)"
-#~ msgstr "Protocolo de Iniciação de Sessão (SIP)"
-
-#~ msgid "Adaptive Differential PCM Coder/Decoder"
-#~ msgstr "Codificador/Decodificador PCM Diferencial Adaptativo"
-
-#~ msgid "A-law Coder/Decoder"
-#~ msgstr "Codificador/Decodificador A-law"
-
-#~ msgid "A-law and Mulaw direct Coder/Decoder"
-#~ msgstr "Codificador/Decodificador direto A-law e Mulaw"
-
-#~ msgid "ITU G.726-32kbps G726 Transcoder"
-#~ msgstr "Transcodificador G726 ITU G.726-32kbps"
-
-#~ msgid "GSM/PCM16 (signed linear) Codec Translation"
-#~ msgstr "Tradutor de codificação GSM/PCM16 (linear com sinal)"
-
-#~ msgid "Speex/PCM16 (signed linear) Codec Translator"
-#~ msgstr "Tradutor de codificação Speex/PCM16 (linear com sinal)"
-
-#~ msgid "Mu-law Coder/Decoder"
-#~ msgstr "Codificador/Decodificador Mu-law"
-
-#~ msgid "Sun Microsystems AU format (signed linear)"
-#~ msgstr "Formato AU Sun Microsystems (linear com sinal)"
-
-#~ msgid "G.723.1 Simple Timestamp File Format"
-#~ msgstr "Formato de Arquivo de Selo Temporal Simples G.723.1"
-
-#~ msgid "Raw G.726 (16/24/32/40kbps) data"
-#~ msgstr "Dado G.726 bruto (16/24/32/40kbps)"
-
-#~ msgid "Raw G729 data"
-#~ msgstr "Dado G729 bruto"
-
-#~ msgid "Raw GSM data"
-#~ msgstr "Dado GSM bruto"
-
-#~ msgid "Raw h263 data"
-#~ msgstr "Dado h263 bruto"
-
-#~ msgid "JPEG (Joint Picture Experts Group) Image"
-#~ msgstr "Imagem JPEG ((Joint Picture Experts Group)"
-
-#~ msgid "Raw uLaw 8khz Audio support (PCM)"
-#~ msgstr "Suporte a uLaw 8khz Áudio bruto (PCM)"
-
-#~ msgid "load => .so ; Raw aLaw 8khz PCM Audio support"
-#~ msgstr "carregar => .so ; Suporte a uLaw 8khz Áudio PCM bruto"
-
-#~ msgid "Raw Signed Linear Audio support (SLN)"
-#~ msgstr "Suporte a Áudio Linear com Sinal (SLN)"
-
-#~ msgid "Dialogic VOX (ADPCM) File Format"
-#~ msgstr "Formato de Arquivo Dialogic VOX (ADPCM)"
-
-#~ msgid "Microsoft WAV format (8000hz Signed Line"
-#~ msgstr "Formato WAV da Microsoft (8000hz Linear com Sinal)"
-
-#~ msgid "Microsoft WAV format (Proprietary GSM)"
-#~ msgstr "Formato WAV da Microsoft (GSM Proprietário) "
-
-#~ msgid "Caller ID related dialplan functions"
-#~ msgstr ""
-#~ "Funções do plano de discagem relacionadas ao identificador da chamada"
-
-#~ msgid "ENUM Functions"
-#~ msgstr "Funções ENUM"
-
-#~ msgid "URI encoding / decoding functions"
-#~ msgstr "Funções de codificação / decodificação de URI"
-
-#~ msgid "Asterisk Extension Language Compiler"
-#~ msgstr "Compilador da Linguagem de Extensão do Asterisk"
-
-#~ msgid "Text Extension Configuration"
-#~ msgstr "Configuração da Extensão de Texto"
-
-#~ msgid "load => .so ; Builtin dialplan functions"
-#~ msgstr "carregar => .so ; Funções de plano de discagem embutidas"
-
-#~ msgid "Loopback Switch"
-#~ msgstr "Interruptor loopback"
-
-#~ msgid "Realtime Switch"
-#~ msgstr "Interruptor de Tempo Real"
-
-#~ msgid "Outgoing Spool Support"
-#~ msgstr "Suporte a bufferização da Saída"
-
-#~ msgid "Wil Cal U (Auto Dialer)"
-#~ msgstr "Wil Cal U (Discador Automático)"
-
-#~ msgid "MySQL Config Resource"
-#~ msgstr "Recurso de Configuração do Mysql"
-
-#~ msgid "ODBC Config Resource"
-#~ msgstr "Recurso de Configuração do ODBC"
-
-#~ msgid "PGSQL Module"
-#~ msgstr "Módulo do PGSQL"
-
-#~ msgid "Cryptographic Digital Signatures"
-#~ msgstr "Assinaturas Digitais Criptográficas"
-
-#~ msgid "Call Parking Resource"
-#~ msgstr "Recurso de Estacionamento de Chamadas"
-
-#~ msgid "Indications Configuration"
-#~ msgstr "Configuração dos Indicadores"
-
-#~ msgid "Call Monitoring Resource"
-#~ msgstr "Recurso de Monitoramento de Chamada"
-
-#~ msgid "Music On Hold Resource"
-#~ msgstr "Recurso da Música de Espera"
-
-#~ msgid "ODBC Resource"
-#~ msgstr "Recurso do ODBC"
-
-#~ msgid "SMDI Module"
-#~ msgstr "Módulo SMDI"
-
-#~ msgid "SNMP Module"
-#~ msgstr "Módulo SNMP"
-
-#~ msgid "Music On Hold"
-#~ msgstr "Música de Espera"
-
-#~ msgid "Application"
-#~ msgstr "Aplicativo"
-
-#~ msgid "Directory of Music"
-#~ msgstr "Diretório de Música"
-
-#~ msgid "Option mode"
-#~ msgstr "Modo da opção"
-
-#~ msgid "Random Play"
-#~ msgstr "Toque Aleatoriamente"
-
-#~ msgid "DTMF mode"
-#~ msgstr "Modo DTMF"
-
-#~ msgid "Primary domain identity for From: headers"
-#~ msgstr "Identidade do primeiro domínio para cabeçalhos De:"
-
-#~ msgid "From user (required by many SIP providers)"
-#~ msgstr "Do usuário (necessário para muitos provedores de SIP)"
-
-# I didn't undestand this one
-#~ msgid "Ring on incoming dialplan contexts"
-#~ msgstr "Tocar no contextos de plano de discagem recebidas"
-
-#~ msgid "Allow Insecure for"
-#~ msgstr "Permitir Inseguro para"
-
-#~ msgid "Mailbox for MWI"
-#~ msgstr "Caixa de Correio para MWI"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "NAT entre o telefone e o Asterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "Verifique as etiquetas nos cabeçalhos"
-
-#~ msgid "Reply Timeout (ms) for down connection"
-#~ msgstr "Tempo Limite da Resposta (ms) para conexões desconectadas"
-
-#~ msgid "Register connection"
-#~ msgstr "Registro da conexão"
-
-#~ msgid "Dial own extension for mailbox"
-#~ msgstr "Discar extensão própria para a caixa de correio"
-
-#~ msgid "Client Type"
-#~ msgstr "Tipo de Cliente"
-
-#~ msgid "Username"
-#~ msgstr "Usuário"
-
-#~ msgid "Section sipgeneral"
-#~ msgstr "Opções Gerais do SIP"
-
-#~ msgid "Allow codecs"
-#~ msgstr "Permitir codificações"
-
-#~ msgid "SIP realm"
-#~ msgstr "Domínio do SIP (realm)"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "Opções gerais do correio de voz"
-
-#~ msgid "From Email address of server"
-#~ msgstr "Endereço do email de origem do servidor"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "Caixas de Correio de Voz"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "O email contém anexos"
-
-#~ msgid "Email"
-#~ msgstr "Email"
-
-#~ msgid "Display Name"
-#~ msgstr "Nome para exibição"
-
-#~ msgid "Password"
-#~ msgstr "Senha"
-
-#~ msgid "zone"
-#~ msgstr "zona"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Configuração de Zona da Voz"
-
-#~ msgid "Message Format"
-#~ msgstr "Formato da Mensagem"
diff --git a/po/pt_BR/base.po b/po/pt_BR/base.po
deleted file mode 100644
index d0e2cf2..0000000
--- a/po/pt_BR/base.po
+++ /dev/null
@@ -1,3954 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-11-11 03:56+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(janela de %d minutos, intervalo de %d segundos)"
-
-msgid "(%s available)"
-msgstr "(%s disponível)"
-
-msgid "(empty)"
-msgstr "(vazio)"
-
-msgid "(no interfaces attached)"
-msgstr "(nenhuma interface conectada)"
-
-msgid "-- Additional Field --"
-msgstr "-- Campo Adicional --"
-
-msgid "-- Please choose --"
-msgstr "-- Por favor, escolha --"
-
-msgid "-- custom --"
-msgstr "-- personalizado --"
-
-msgid "1 Minute Load:"
-msgstr "Carga 1 Minuto:"
-
-msgid "15 Minute Load:"
-msgstr "Carga 15 Minutos:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz, 2º canal acima"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz, 2º canal abaixo"
-
-msgid "5 Minute Load:"
-msgstr "Carga 5 Minutos:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-"<abbr title=\"Identificador de Conjunto Básico de Serviços\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-"Porta de consulta <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-"Porta do servidor <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"O servidor <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr> irá "
-"consultar na ordem do arquivo resolvfile"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"<abbr title=\"Identificador de Conjunto de Serviços Estendidos\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Endereço <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "Roteador <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-"Máscara de rede <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"Endereço do <abbr title=\"Protocolo de Internet Versão 6\">IPv6</abbr> "
-"Endereço ou rede (CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "Roteador <abbr title=\"Protocolo de Internet Versão 6\">IPv6</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Configuração do <abbr title=\"Diodo Emissor de Luz\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Nome do <abbr title=\"Diodo Emissor de Luz\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "Endereço <abbr title=\"Controle de Acesso ao Meio\">MAC</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"Numero máximo de atribuições <abbr title=\"Protocolo de Configuração "
-"Dinâmica de Equipamentos\">DHCP</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"Tamanho máximo do pacote do <abbr title=\"Extension Mechanisms for Domain "
-"Name System\">EDNS0</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "Número máximo de consultas concorrentes"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Par: %s / Grupo: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "<abbr title=\"Access Point Name\">APN</abbr>"
-
-msgid "AR Support"
-msgstr "Suporte AR"
-
-msgid "ARP retry threshold"
-msgstr ""
-"Limite de retentativas do <abbr title=\"Address Resolution Protocol\">ARP</"
-"abbr>"
-
-msgid "ATM Bridges"
-msgstr "Ponte ATM"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "Identificador de Canal Virtual ATM (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "Identificador de Caminho Virtual ATM (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"Pontes ATM expõem ethernet encapsuladas em conexões AAL5 como interfaces de "
-"rede virutais no Linux. Estas podem ser usadas em conjunto com o DHCP ou PPP "
-"para discar em um provedor de rede."
-
-msgid "ATM device number"
-msgstr "Número do dispositivo ATM"
-
-msgid "Accept router advertisements"
-msgstr "Aceita anúncios de roteador"
-
-msgid "Access Concentrator"
-msgstr "Concentrador de Acesso"
-
-msgid "Access Point"
-msgstr "Ponto de Acceso (AP)"
-
-msgid "Action"
-msgstr "Ação"
-
-msgid "Actions"
-msgstr "Ações"
-
-msgid "Activate this network"
-msgstr "Ativar esta rede"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Rotas <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr> ativas"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Rotas <abbr title=\"Protocolo de Internet Versão 6\">IPv6</abbr> ativas"
-
-msgid "Active Connections"
-msgstr "Conexões Ativas"
-
-msgid "Active DHCP Leases"
-msgstr "Atribuições DHCP ativas"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Atribuições DHCPv6 ativas"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Adicionar"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Adiciona um sufixo de domínio local para equipamentos conhecidos"
-
-msgid "Add new interface..."
-msgstr "Adiciona uma nova interface..."
-
-msgid "Additional Hosts files"
-msgstr "Arquivos adicionais de equipamentos conhecidos (hosts)"
-
-msgid "Address"
-msgstr "Endereço"
-
-msgid "Address to access local relay bridge"
-msgstr "Endereço para acessar a ponte por retransmissão local "
-
-msgid "Administration"
-msgstr "Administração"
-
-msgid "Advanced Settings"
-msgstr "Opções Avançadas"
-
-msgid "Advertise IPv6 on network"
-msgstr "Anuncie IPv6 na rede"
-
-msgid "Advertised network ID"
-msgstr "Identificador da rede anunciado"
-
-msgid "Alert"
-msgstr "Alerta"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Permitir autenticação <abbr title=\"Shell Seguro\">SSH</abbr> por senha"
-
-msgid "Allow all except listed"
-msgstr "Permitir todos, exceto os listados"
-
-msgid "Allow listed only"
-msgstr "Permitir somente os listados"
-
-msgid "Allow localhost"
-msgstr "Permitir computador local"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Permitir que equipamentos remotos conectem à portas locais encaminhadas por "
-"SSH"
-
-msgid "Allow root logins with password"
-msgstr "Permite autenticação do root com senha"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Permite que o usuário <em>root</em> se autentique utilizando senha"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Permite respostas que apontem para 127.0.0.0/8 de servidores externos, por "
-"exemplo, para os serviços RBL"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Faixa permitida de 1 a 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Uma rede adicional será criada se você deixar isto desmarcado."
-
-msgid "Antenna 1"
-msgstr "Antena 1"
-
-msgid "Antenna 2"
-msgstr "Antena 2"
-
-msgid "Antenna Configuration"
-msgstr "configuração de antena"
-
-msgid "Any zone"
-msgstr "Qualquer zona"
-
-msgid "Apply"
-msgstr "Aplicar"
-
-msgid "Applying changes"
-msgstr "Aplicar as alterações"
-
-msgid "Assign interfaces..."
-msgstr "atribuir as interfaces"
-
-msgid "Associated Stations"
-msgstr "Estações associadas"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Controlador Wireless Atheros 802.11%s"
-
-msgid "Authentication"
-msgstr "Autenticação"
-
-msgid "Authoritative"
-msgstr "Autoritário"
-
-msgid "Authorization Required"
-msgstr "Autorização Necessária"
-
-msgid "Auto Refresh"
-msgstr "Atualização Automática"
-
-msgid "Available"
-msgstr "Disponível"
-
-msgid "Available packages"
-msgstr "Pacotes disponíveis"
-
-msgid "Average:"
-msgstr "Média:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Voltar"
-
-msgid "Back to Overview"
-msgstr "Voltar para Visão Geral"
-
-msgid "Back to configuration"
-msgstr "Voltar para configuração"
-
-msgid "Back to overview"
-msgstr "Voltar para visão geral"
-
-msgid "Back to scan results"
-msgstr "Voltar para os resultados da busca"
-
-msgid "Background Scan"
-msgstr "Busca em Segundo Plano"
-
-msgid "Backup / Flash Firmware"
-msgstr "Backup / Gravar Firmware"
-
-msgid "Backup / Restore"
-msgstr "Backup / Restauração"
-
-msgid "Backup file list"
-msgstr "Lista de arquivos para backup"
-
-msgid "Bad address specified!"
-msgstr "Endereço especificado está incorreto!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Abaixo estão os arquivos para backup. Ela consiste de arquivos de "
-"configuração alterados marcados pelo opkg, arquivos base essenciais e "
-"padrões para backup definidos pelo usuário."
-
-msgid "Bitrate"
-msgstr "Taxa de bits"
-
-msgid "Bogus NX Domain Override"
-msgstr "Substituir Domínio NX Falsos"
-
-msgid "Bridge"
-msgstr "Ponte"
-
-msgid "Bridge interfaces"
-msgstr "Juntar interfaces em uma ponte"
-
-msgid "Bridge unit number"
-msgstr "Número da ponte"
-
-msgid "Bring up on boot"
-msgstr "Levantar na inicialização"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Controlador Wireless Broadcom 802.11%s"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Broadcom BCM%04x 802.11 Wireless Controlador"
-
-msgid "Buffered"
-msgstr "Buffered"
-
-msgid "Buttons"
-msgstr "Botões"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "Uso da CPU (%)"
-
-msgid "Cached"
-msgstr "Cached"
-
-msgid "Cancel"
-msgstr "Cancelar"
-
-msgid "Chain"
-msgstr "Cadeia"
-
-msgid "Changes"
-msgstr "Alterações"
-
-msgid "Changes applied."
-msgstr "Alterações aplicadas."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Muda a senha do administrador para acessar este dispositivo"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check"
-msgstr "Verificar"
-
-msgid "Checksum"
-msgstr "Soma de verificação"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Escolha a zona do firewall que você quer definir para esta interface. "
-"Selecione <em>não especificado -ou- criar</em> para remover a interface da "
-"zona associada ou preencha o campo para criar uma nova zona associada a esta "
-"interface."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Escolha a rede (s) que deseja anexar a este interface wireless ou preencha o "
-"<em> criar </em> campo para definir uma nova rede."
-
-msgid "Cipher"
-msgstr "Cifra"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Clique em \"Gerar arquivo\" para baixar um arquivo tar com os arquivos de "
-"configuração atuais. Para retornar o roteador para o seu estado inicial, "
-"clique em \"Zerar configuração\" (somente possível para imagens squashfs)."
-
-msgid "Client"
-msgstr "Cliente"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-"Identificador do cliente enviando quando a requisição do DHCP é realizada"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Feche as conexões inativas após uma dada quantidade de segundos. Use 0 para "
-"manter as conexões."
-
-msgid "Close list..."
-msgstr "Fechar a lista..."
-
-msgid "Collecting data..."
-msgstr "Coletando dados..."
-
-msgid "Command"
-msgstr "Comando"
-
-msgid "Common Configuration"
-msgstr "Configuração Comum"
-
-msgid "Compression"
-msgstr "Compressão"
-
-msgid "Configuration"
-msgstr "Configuração"
-
-msgid "Configuration applied."
-msgstr "Configuração aplicada."
-
-msgid "Configuration files will be kept."
-msgstr "Os arquivos de configuração serão mantidos."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Configura esta montagem como um armazenamento sobreposto para o bloco-extroot"
-
-msgid "Confirmation"
-msgstr "Confirmação"
-
-msgid "Connect"
-msgstr "Conectar"
-
-msgid "Connected"
-msgstr "Conectado"
-
-msgid "Connection Limit"
-msgstr "Limite de conexão"
-
-msgid "Connections"
-msgstr "Conexões"
-
-msgid "Country"
-msgstr "País"
-
-msgid "Country Code"
-msgstr "Código do País"
-
-msgid "Cover the following interface"
-msgstr "Utilizando a seguinte interface"
-
-msgid "Cover the following interfaces"
-msgstr "Utilizando as seguintes interfaces"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Criar / Atribuir a uma zona de firewall"
-
-msgid "Create Interface"
-msgstr "Criar Interface"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Criar uma ponte juntando múltiplas interfaces"
-
-msgid "Critical"
-msgstr "Crítico"
-
-msgid "Cron Log Level"
-msgstr "Nível de Registro da Cron"
-
-msgid "Custom Interface"
-msgstr "Interface Personalizada"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Se possível, personaliza o comportamento dos <abbr title=\"Diodo Emissor de "
-"Luz\">LED</abbr>s."
-
-msgid "DHCP Leases"
-msgstr "Atribuições do DHCP"
-
-msgid "DHCP Server"
-msgstr "Servidor DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP e DNS"
-
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-msgid "DHCP-Options"
-msgstr "Opções de DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "DHCPv6 Leases"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Encaminhamentos DNS"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Depurar"
-
-msgid "Default %d"
-msgstr "Padrão %d"
-
-msgid "Default gateway"
-msgstr "Roteador Padrão"
-
-msgid "Default state"
-msgstr "Estado padrão"
-
-msgid "Define a name for this network."
-msgstr "Define um nome para esta rede."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Define opções adicionais do DHCP. Por exemplo "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" que anuncia diferentes servidores "
-"DNS para os clientes."
-
-msgid "Delete"
-msgstr "Apagar"
-
-msgid "Delete this interface"
-msgstr "Apagar esta interface"
-
-msgid "Delete this network"
-msgstr "Apagar esta rede"
-
-msgid "Description"
-msgstr "Descrição"
-
-msgid "Design"
-msgstr "Tema"
-
-msgid "Destination"
-msgstr "Destino"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid "Device Configuration"
-msgstr "Configuração do Dispositivo"
-
-msgid "Diagnostics"
-msgstr "Diagnóstico"
-
-msgid "Directory"
-msgstr "Diretório"
-
-msgid "Disable"
-msgstr "Desabilitar"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Desabilita <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-"para esta interface."
-
-msgid "Disable DNS setup"
-msgstr "Desabilita a configuração do DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Desativar temporizador de Beacon de Hardware"
-
-msgid "Disabled"
-msgstr "Desabilitado"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-"Descartar respostas de servidores externos para redes privadas (RFC1918)"
-
-msgid "Displaying only packages containing"
-msgstr "Mostre somente os pacotes contendo"
-
-msgid "Distance Optimization"
-msgstr "Otimização de Distância"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distância para o computador mais distante da rede (em metros)."
-
-msgid "Diversity"
-msgstr "Diversidade"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq é um servidor combinado de <abbr title=\"Protocolo de Configuração "
-"Dinâmica de Hosts\">DHCP</abbr> e <abbr title=\"Sistema de Nomes de Domínios"
-"\">DNS</abbr> para firewalls <abbr title=\"Tradução de Endereço de Rede"
-"\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-"Não mantenha em cache para respostas negativas, como por exemplo para os "
-"domínios inexistentes"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Não encaminhe requisições que não podem ser respondidas por servidores de "
-"nomes públicos"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Não encaminhe buscas por endereço reverso das redes local"
-
-msgid "Do not send probe responses"
-msgstr "Não enviar respostas de exames"
-
-msgid "Domain required"
-msgstr "Requerer domínio"
-
-msgid "Domain whitelist"
-msgstr "Lista branca de domínios"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Não encaminhar consultas <abbr title=\"Sistema de Nomes de Domínios\">DNS</"
-"abbr> sem o nome completo do <abbr title=\"Sistema de Nomes de Domínios"
-"\">DNS</abbr>"
-
-msgid "Download and install package"
-msgstr "Baixe e instale o pacote"
-
-msgid "Download backup"
-msgstr "Baixar o backup"
-
-msgid "Dropbear Instance"
-msgstr "Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear oferece um acesso shell seguro à rede <abbr title=\"Shell Seguro\">"
-"(SSH)</abbr> e um servidor <abbr title=\"Cópia Segura\">SCP</abbr> integrado"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"<abbr title=\"Protocolo de Configuração Dinâmica de Hosts\">DHCP</abbr> "
-"Dinâmico"
-
-msgid "Dynamic tunnel"
-msgstr "Túnel dinâmico"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Aloca dinamicamente os endereços do DHCP para os clientes. Se desabilitado, "
-"somente os clientes com atribuições estáticas serão servidos. "
-
-msgid "EAP-Method"
-msgstr "Método EAP"
-
-msgid "Edit"
-msgstr "Editar"
-
-msgid "Edit this interface"
-msgstr "Editar esta interface"
-
-msgid "Edit this network"
-msgstr "Editar esta rede"
-
-msgid "Emergency"
-msgstr "Emergência"
-
-msgid "Enable"
-msgstr "Ativar"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Ativar <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Ativar a atualização de ponto final dinâmico HE.net"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Ativar a negociação de IPv6 no enlace PPP"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Ativar o encaminhamento de quadros jumbos (Jumbo Frames)"
-
-msgid "Enable NTP client"
-msgstr "Ativar o cliente <abbr title=\"Network Time Protocol\">NTP</abbr>"
-
-msgid "Enable TFTP server"
-msgstr "Ativar servidor TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "Ativar funcionalidade de VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Ativar o aprendizado e obsolescência"
-
-msgid "Enable this mount"
-msgstr "Ativar esta montagem"
-
-msgid "Enable this swap"
-msgstr "Ativar este espaço de troca (swap)"
-
-msgid "Enable/Disable"
-msgstr "Ativar/Desativar"
-
-msgid "Enabled"
-msgstr "Ativado"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Ativa o protocolo STP nesta ponte"
-
-msgid "Encapsulation mode"
-msgstr "Modo de encapsulamento"
-
-msgid "Encryption"
-msgstr "Cifragem"
-
-msgid "Erasing..."
-msgstr "Apagando..."
-
-msgid "Error"
-msgstr "Erro"
-
-msgid "Ethernet Adapter"
-msgstr "Adaptador Ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Switch Ethernet"
-
-msgid "Expand hosts"
-msgstr "Expandir arquivos de equipamentos conhecidos (hosts)"
-
-msgid "Expires"
-msgstr "Expira"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Tempo de expiração dos endereços atribuídos. Mínimo é 2 minutos (<code>2m</"
-"code>)."
-
-msgid "External system log server"
-msgstr "Servidor de registro do sistema externo"
-
-msgid "External system log server port"
-msgstr "Porta do servidor de registro do sistema externo"
-
-msgid "Fast Frames"
-msgstr "Quadros Rápidos"
-
-msgid "File"
-msgstr "Arquivo"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Nome do arquivo da imagem de boot anunciada para os clientes"
-
-msgid "Filesystem"
-msgstr "Sistema de Arquivos"
-
-msgid "Filter"
-msgstr "Filtro"
-
-msgid "Filter private"
-msgstr "Filtrar endereços privados"
-
-msgid "Filter useless"
-msgstr "Filtrar consultas inúteis"
-
-msgid "Find and join network"
-msgstr "Procurar e conectar à rede"
-
-msgid "Find package"
-msgstr "Procurar pacote"
-
-msgid "Finish"
-msgstr "Terminar"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr "Configurações do Firewall"
-
-msgid "Firewall Status"
-msgstr "Estado do Firewall"
-
-msgid "Firmware Version"
-msgstr "Versão do Firmware"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Porta de origem fixa para saída de consultas DNS"
-
-msgid "Flags"
-msgstr "Marcadores"
-
-msgid "Flash Firmware"
-msgstr "Gravar Firmware"
-
-msgid "Flash image..."
-msgstr "Gravar imagem..."
-
-msgid "Flash new firmware image"
-msgstr "Gravar nova imagem do firmware"
-
-msgid "Flash operations"
-msgstr "Operações na memória flash"
-
-msgid "Flashing..."
-msgstr "Gravando na flash..."
-
-msgid "Force"
-msgstr "Forçar"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr "Forçar CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Forçar o DHCP nesta rede mesmo se outro servidor for detectado."
-
-msgid "Force TKIP"
-msgstr "Forçar TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Forçar TKIP e CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Encaminhar tráfego DHCP"
-
-msgid "Forward broadcast traffic"
-msgstr "Encaminhar tráfego broadcast"
-
-msgid "Forwarding mode"
-msgstr "Modo de encaminhamento"
-
-msgid "Fragmentation Threshold"
-msgstr "Limiar de Fragmentação"
-
-msgid "Frame Bursting"
-msgstr "Explosão de Quadros (Frame Bursting)"
-
-msgid "Free"
-msgstr "Livre"
-
-msgid "Free space"
-msgstr "Espaço livre"
-
-msgid "Frequency Hopping"
-msgstr "Salto de Frequência"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "Somente GPRS"
-
-msgid "Gateway"
-msgstr "Roteador"
-
-msgid "Gateway ports"
-msgstr "Acesso remoto a portas encaminhadas"
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "General Setup"
-msgstr "Configurações Gerais"
-
-msgid "Generate archive"
-msgstr "Gerar arquivo"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Generico 802.11%s Wireless Controlador"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "A senha de confirmação informada não casa. Senha não alterada!"
-
-msgid "Go to password configuration..."
-msgstr "Ir para a configuração de senha..."
-
-msgid "Go to relevant configuration page"
-msgstr "Ir para a página de configuração pertinente"
-
-msgid "HE.net password"
-msgstr "Senha HE.net"
-
-msgid "HE.net user ID"
-msgstr "Identificador do usuário HE.net"
-
-msgid "HT capabilities"
-msgstr "Capacidade de HT"
-
-msgid "HT mode"
-msgstr "Modo HT"
-
-# Não sei que contexto isto está sendo usado
-msgid "Handler"
-msgstr "Responsável"
-
-msgid "Hang Up"
-msgstr "Suspender"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Aqui você pode configurar os aspectos básicos do seu equipamento, como o "
-"nome do equipamento ou o fuso horário."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Aqui você pode colar as chaves públicas do SSH (uma por linha) para a "
-"autenticação por chaves do SSH."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Hermes 802.11b Wireless Controlador"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"Ocultar <abbr title=\"Identificador de Conjunto de Serviços Estendidos"
-"\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Entradas de Equipamentos"
-
-msgid "Host expiry timeout"
-msgstr "Tempo limite de expiração de equipamento"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-"<abbr title=\"Endereço do Protocolo de Internet\">IP</abbr> do Equipamento "
-"ou Rede"
-
-msgid "Hostname"
-msgstr "Nome do equipamento"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Nome do equipamento enviado quando requisitar DHCP"
-
-msgid "Hostnames"
-msgstr "Nome dos equipamentos"
-
-msgid "IP address"
-msgstr "Endereço IP"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "Firewall para IPv4"
-
-msgid "IPv4 WAN Status"
-msgstr "Estado IPv4 da WAN"
-
-msgid "IPv4 address"
-msgstr "Endereço IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "Broadcast IPv4"
-
-msgid "IPv4 gateway"
-msgstr "Roteador padrão IPv4"
-
-msgid "IPv4 netmask"
-msgstr "Máscara de rede IPv4"
-
-msgid "IPv4 only"
-msgstr "Somente IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "Tamanho do prefixo IPv4"
-
-msgid "IPv4-Address"
-msgstr "Endereço IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "Firewall para IPv6"
-
-msgid "IPv6 WAN Status"
-msgstr "Estado IPv6 da WAN"
-
-msgid "IPv6 address"
-msgstr "Endereço IPv6"
-
-msgid "IPv6 gateway"
-msgstr "Roteador padrão do IPv6"
-
-msgid "IPv6 only"
-msgstr "Somente IPv6"
-
-msgid "IPv6 prefix"
-msgstr "Prefixo IPv6"
-
-msgid "IPv6 prefix length"
-msgstr "Tamanho Prefixo IPv6"
-
-msgid "IPv6-Address"
-msgstr "Endereço IPv6"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-in-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-sobre-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-sobre-IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "Identidade PEAP"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Se especificado, monta o dispositivo pelo seu UUID ao invés de um nó de "
-"dispositivo fixo"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Se especificado, monta o dispositivo pela etiqueta da partiçãoo ao invés de "
-"um nó de dispositivo fixo"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Se desmarcado, nenhuma rota padrão será configurada"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-"Se desmarcado, os endereços dos servidores DNS anunciados serão ignorados"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Se a sua memória física for insuficiente, os dados não utilizados poderão "
-"ser armazenados temporariamente em um dispositivo swap, resultando em uma "
-"maior quantidade de memória <abbr title=\"Memória de Acesso Aleatório\">RAM</"
-"abbr> utilizável. Esteja ciente de que a troca de dados (swap) é um processo "
-"muito lento, uma vez que o dispositivo swap não pode ser acessado com taxas "
-"de transferência tão altas com a memória <abbr title=\"Memória de Acesso "
-"Aleatório\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Ignorar arquivos de equipamentos conhecidos (hosts)"
-
-msgid "Ignore interface"
-msgstr "Ignorar interface"
-
-msgid "Ignore resolve file"
-msgstr "Ignorar arquivo de resolução de nomes (resolv.conf)"
-
-msgid "Image"
-msgstr "Imagem"
-
-msgid "In"
-msgstr "Entrada"
-
-msgid "Inactivity timeout"
-msgstr "Tempo limite de inatividade"
-
-msgid "Inbound:"
-msgstr "Entrando:"
-
-msgid "Info"
-msgstr "Informação"
-
-msgid "Initscript"
-msgstr "Script de inicialização"
-
-msgid "Initscripts"
-msgstr "Scripts de Inicialização"
-
-msgid "Install"
-msgstr "Instalar"
-
-msgid "Install package %q"
-msgstr "Instalar pacote %q"
-
-msgid "Install protocol extensions..."
-msgstr "Instalar extensões de protocolo..."
-
-msgid "Installed packages"
-msgstr "Pacotes instalados"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Interface Configuration"
-msgstr "Configuração da Interface"
-
-msgid "Interface Overview"
-msgstr "Visão Geral da Interface"
-
-msgid "Interface is reconnecting..."
-msgstr "A interface está reconectando..."
-
-msgid "Interface is shutting down..."
-msgstr "A interface está desligando..."
-
-msgid "Interface not present or not connected yet."
-msgstr "A interface não está presente ou não está conectada ainda."
-
-msgid "Interface reconnected"
-msgstr "Interface reconectada"
-
-msgid "Interface shut down"
-msgstr "Interface desligada"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internal Server Error"
-msgstr "erro no servidor interno"
-
-msgid "Invalid"
-msgstr "Valor inválido"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-"O valor informado do ID da VLAN é inválido! Somente valores entre %d e %d "
-"são permitidos."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-"O valor informado do ID da VLAN é inválido! Somente valores únicos são "
-"permitidos."
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Usuário e/ou senha inválida! Por favor, tente novamente."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"A imagem que está a tentar carregar aparenta nao caber na flash do "
-"equipamento. Por favor verifique o arquivo da imagem!"
-
-msgid "Java Script required!"
-msgstr "É necessário Java Script!"
-
-msgid "Join Network"
-msgstr "Conectar à Rede"
-
-msgid "Join Network: Settings"
-msgstr "Conectar à Rede: Configurações"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Conectar à Rede: Busca por Rede Sem Fio"
-
-msgid "Keep settings"
-msgstr "Manter configurações"
-
-msgid "Kernel Log"
-msgstr "Registo do Kernel"
-
-msgid "Kernel Version"
-msgstr "Versão do Kernel"
-
-msgid "Key"
-msgstr "Chave"
-
-msgid "Key #%d"
-msgstr "Chave #%d"
-
-msgid "Kill"
-msgstr "Matar"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "Servidor L2TP"
-
-msgid "LCP echo failure threshold"
-msgstr "Limite de falha no eco do LCP"
-
-msgid "LCP echo interval"
-msgstr "Intervalo do eco do LCP"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Etiqueta"
-
-msgid "Language"
-msgstr "Idioma"
-
-msgid "Language and Style"
-msgstr "Idioma e Estilo"
-
-msgid "Lease validity time"
-msgstr "Tempo de validade da atribuição"
-
-msgid "Leasefile"
-msgstr "Arquivo de atribuições"
-
-msgid "Leasetime"
-msgstr "Tempo de atribuição do DHCP"
-
-msgid "Leasetime remaining"
-msgstr "Tempo restante da atribuição"
-
-msgid "Leave empty to autodetect"
-msgstr "Deixe vazio para detectar automaticamente"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Deixe vazio para usar o endereço WAN atual"
-
-msgid "Legend:"
-msgstr "Legenda:"
-
-msgid "Limit"
-msgstr "Limite"
-
-msgid "Link On"
-msgstr "Enlace Ativo"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Lista dos servidores <abbr title=\"Domain Name System\">DNS</abbr> para "
-"encaminhar as requisições"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-"Lista dos domínios para os quais será permitido respostas apontando para "
-"redes privadas (RFC1918)"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-"Lista de servidores <abbr title=\"Domain Name System\">DNS</abbr> que "
-"fornecem resultados errados para consultas a domínios inexistentes (NX)"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-"Escuta apenas na interface especificada. Se não especificado, escuta em todas"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Porta de escuta para a entrada das consultas DNS"
-
-msgid "Load"
-msgstr "Carga"
-
-msgid "Load Average"
-msgstr "Carga Média"
-
-msgid "Loading"
-msgstr "Carregando"
-
-msgid "Local IPv4 address"
-msgstr "Endereço IPv4 local"
-
-msgid "Local IPv6 address"
-msgstr "Endereço IPv6 local"
-
-msgid "Local Startup"
-msgstr "Inicialização Local"
-
-msgid "Local Time"
-msgstr "Hora Local"
-
-msgid "Local domain"
-msgstr "Domínio Local"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Especificação do domínio local. Nomes que casam com este domínio nunca serão "
-"encaminhados e são resolvidos somente pelo DHCP ou pelo arquivos de "
-"equipamentos conhecidos (hosts)"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Sufixo do domínio local adicionado aos nomes no DHCP e nas entradas dos "
-"arquivo de equipamentos conhecidos (hosts)"
-
-msgid "Local server"
-msgstr "Servidor local"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Localizar o nome do equipamento dependendo da subrede requisitante se "
-"mútliplos endereços IPs estiverem disponíveis"
-
-msgid "Localise queries"
-msgstr "Localizar consultas"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Travado para o canal %d usado por %s"
-
-msgid "Log output level"
-msgstr "Nível de detalhamento de saída dos registros"
-
-msgid "Log queries"
-msgstr "Registar as consultas"
-
-msgid "Logging"
-msgstr "Registrando os eventos"
-
-msgid "Login"
-msgstr "Entrar"
-
-msgid "Logout"
-msgstr "Sair"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "O endereço mais baixo concedido como deslocamento do endereço da rede."
-
-msgid "MAC-Address"
-msgstr "Endereço MAC"
-
-msgid "MAC-Address Filter"
-msgstr "Filtro de Endereço MAC"
-
-msgid "MAC-Filter"
-msgstr "Filtro de MAC"
-
-msgid "MAC-List"
-msgstr "Lista de MAC"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Taxa Máxima"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Número máximo permitido de atribuiçoes DHCP ativas"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Número máximo permitido de consultas DNS concorrentes"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Tamanho máximo permitido dos pacotes UDP EDNS.0"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Tempo máximo, em segundos, para esperar que o modem fique pronto"
-
-# Desconheço o uso
-msgid "Maximum hold time"
-msgstr "Tempo máximo de espera"
-
-msgid "Maximum number of leased addresses."
-msgstr "Número máximo de endereços atribuídos."
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "Memória"
-
-msgid "Memory usage (%)"
-msgstr "Uso da memória (%)"
-
-msgid "Metric"
-msgstr "Métrica"
-
-msgid "Minimum Rate"
-msgstr "Taxa Mínima"
-
-msgid "Minimum hold time"
-msgstr "Tempo mínimo de espera"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Extensão para o protocolo %q está ausente"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid "Modem device"
-msgstr "Dispositivo do Modem"
-
-msgid "Modem init timeout"
-msgstr "Estouro de tempo da inicialização do modem"
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr "Entrada de Montagem"
-
-msgid "Mount Point"
-msgstr "Ponto de Montagem"
-
-msgid "Mount Points"
-msgstr "Pontos de Montagem"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Pontos de Montagem - Entrada de Montagem"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Pontos de Montagem - Entrada da Swap"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Pontos de montagem definem em que ponto um dispositivo de armazenamento será "
-"anexado ao sistema de arquivos"
-
-msgid "Mount options"
-msgstr "Opções de montagem"
-
-msgid "Mount point"
-msgstr "Ponto de montagem"
-
-msgid "Mounted file systems"
-msgstr "Sistemas de arquivos montados"
-
-msgid "Move down"
-msgstr "Mover para baixo"
-
-msgid "Move up"
-msgstr "Mover para cima"
-
-msgid "Multicast Rate"
-msgstr "Taxa de Multicast"
-
-msgid "Multicast address"
-msgstr "Endereço de Multicast"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "Candidatos de servidores NTP"
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Name of the new interface"
-msgstr "Nome da nova interface"
-
-msgid "Name of the new network"
-msgstr "Nome da nova rede"
-
-msgid "Navigation"
-msgstr "Navegação"
-
-msgid "Netmask"
-msgstr "Máscara de rede"
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "Network Utilities"
-msgstr "Utilitários de Rede"
-
-msgid "Network boot image"
-msgstr "Imagem de boot pela rede"
-
-msgid "Network without interfaces."
-msgstr "Rede sem interfaces."
-
-msgid "Next »"
-msgstr "Próximo »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Nenhum Servidor DHCP configurado para esta interface"
-
-msgid "No chains in this table"
-msgstr "Nenhuma cadeira nesta tabela"
-
-msgid "No files found"
-msgstr "Nenhum arquivo encontrado"
-
-msgid "No information available"
-msgstr "Nenhuma informação disponível"
-
-msgid "No negative cache"
-msgstr "Nenhum cache negativo"
-
-msgid "No network configured on this device"
-msgstr "Nenhuma rede configurada neste dispositivo"
-
-msgid "No network name specified"
-msgstr "Nenhum nome de rede foi especificado"
-
-msgid "No package lists available"
-msgstr "Nenhuma lista de pacotes disponível"
-
-msgid "No password set!"
-msgstr "Nenhuma senha definida!"
-
-msgid "No rules in this chain"
-msgstr "Sem regras nesta cadeia"
-
-msgid "No zone assigned"
-msgstr "Nenhuma zona definida"
-
-msgid "Noise"
-msgstr "Ruído"
-
-msgid "Noise:"
-msgstr "Ruído:"
-
-msgid "None"
-msgstr "Nenhum"
-
-msgid "Normal"
-msgstr "Normal"
-
-msgid "Not Found"
-msgstr "Não Encontrado"
-
-msgid "Not associated"
-msgstr "Não conectado"
-
-msgid "Not connected"
-msgstr "Não conectado"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Nota: Os arquivos de configuração serão apagados."
-
-msgid "Notice"
-msgstr "Aviso"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Configuração-OPKG"
-
-msgid "Off-State Delay"
-msgstr "Atraso no estado de desligado"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Nesta página pode configurar as interfaces de rede. Esta interface pode "
-"formar uma ponte juntando várias interfaces. Para isto, marque o campo "
-"\"Juntar interfaces em uma ponte\" e informar as várias interfaces de rede. "
-"Pode também usar a notação para <abbr title=\"Rede Local Virtual\">VLAN</"
-"abbr> <samp>INTERFACE.VLANNR</samp> (<abbr title=\"por exemplo\">ex.</abbr>: "
-"<samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Atraso no estado de conexões"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Um ou mais campos contém valores inválidos!"
-
-msgid "One or more required fields have no value!"
-msgstr "Um ou mais campos obrigatórios não tem valor!"
-
-msgid "Open list..."
-msgstr "Abrir lista..."
-
-msgid "Option changed"
-msgstr "Opção alterada"
-
-msgid "Option removed"
-msgstr "Opção removida"
-
-msgid "Options"
-msgstr "Opções"
-
-msgid "Other:"
-msgstr "Outro:"
-
-msgid "Out"
-msgstr "Saída"
-
-msgid "Outbound:"
-msgstr "Saindo:"
-
-msgid "Outdoor Channels"
-msgstr "Canais para externo"
-
-msgid "Override MAC address"
-msgstr "Sobrescrever o endereço MAC"
-
-msgid "Override MTU"
-msgstr "Sobrescrever o MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Sobrescrever o roteador padrão nas respostas do DHCP"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Sobrescrever a máscara de rede enviada aos clientes. Normalmente, ela é "
-"calculada a partir da máscara da subrede de onde o cliente solicitou o "
-"endereço."
-
-msgid "Override the table used for internal routes"
-msgstr "Sobrescrever a tabela usada para as rotas internas"
-
-msgid "Overview"
-msgstr "Visão geral"
-
-msgid "Owner"
-msgstr "Dono"
-
-msgid "PAP/CHAP password"
-msgstr "Senha do PAP/CHAP"
-
-msgid "PAP/CHAP username"
-msgstr "Usuário do PAP/CHAP"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "Encapsulamento PPPoA "
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "O pacote libiwinfo é necessário!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "As listas de pacotes são mais antigas do que 24 horas"
-
-msgid "Package name"
-msgstr "Nome do Pacote"
-
-msgid "Packets"
-msgstr "Pacotes"
-
-msgid "Part of zone %q"
-msgstr "Parte da zona %q"
-
-msgid "Password"
-msgstr "Senha"
-
-msgid "Password authentication"
-msgstr "Autenticação por senha"
-
-msgid "Password of Private Key"
-msgstr "Senha da Chave Privada"
-
-msgid "Password successfully changed!"
-msgstr "A senha foi alterada com sucesso!"
-
-msgid "Path to CA-Certificate"
-msgstr "Caminho para o Certificado da AC"
-
-msgid "Path to Client-Certificate"
-msgstr "Caminho para o Certificado do Cliente"
-
-msgid "Path to Private Key"
-msgstr "Caminho para a Chave Privada"
-
-msgid "Path to executable which handles the button event"
-msgstr "Caminho para o executável que trata o evento do botão"
-
-msgid "Peak:"
-msgstr "Pico:"
-
-msgid "Perform reboot"
-msgstr "Reiniciar o sistema"
-
-msgid "Perform reset"
-msgstr "Zerar configuração"
-
-msgid "Phy Rate:"
-msgstr "Taxa física:"
-
-msgid "Physical Settings"
-msgstr "Configurações Físicas"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "Pcts."
-
-msgid "Please enter your username and password."
-msgstr "Entre com o seu usuário e senha."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Por favor aguarde: Equipamento reiniciando..."
-
-msgid "Policy"
-msgstr "Política"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Port %d"
-msgstr "Porta %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "Porta %d está sem etiqueta para mútliplas VLANs!"
-
-msgid "Port status:"
-msgstr "Status da porta"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Assumir que o parceiro está morto depois de uma data quantidade de falhas de "
-"echo do LCP. Use 0 para ignorar as falhas"
-
-msgid "Prevents client-to-client communication"
-msgstr "Impede a comunicação de cliente para cliente"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Prism2/2.5/3 802.11b Wireless Controlador"
-
-msgid "Proceed"
-msgstr "Proceder"
-
-msgid "Processes"
-msgstr "Processos"
-
-msgid "Prot."
-msgstr "Protocolo"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Protocol family"
-msgstr "Família do protocolo"
-
-msgid "Protocol of the new interface"
-msgstr "Protocolo para a nova interface"
-
-msgid "Protocol support is not installed"
-msgstr "O suporte ao protocolo não está instalado"
-
-msgid "Provide NTP server"
-msgstr "Fornecer servidor <abbr title=\"Network Time Protocol\">NTP</abbr>"
-
-msgid "Provide new network"
-msgstr "Prover nova rede"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Ad-Hoc falso (ahdemo)"
-
-msgid "Quality"
-msgstr "Qualidade"
-
-msgid "RTS/CTS Threshold"
-msgstr "Limiar RTS/CTS"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "Taxa de RX"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "RaLink 802.11%s Wireless Controlador"
-
-msgid "Radius-Accounting-Port"
-msgstr "Porta de contabilidade do RADIUS"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Segredo da contabilidade do RADIUS"
-
-msgid "Radius-Accounting-Server"
-msgstr "Servidor da contabilidade do RADIUS"
-
-msgid "Radius-Authentication-Port"
-msgstr "Porta de autenticação do RADIUS"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Segredo da autenticação do RADIUS"
-
-msgid "Radius-Authentication-Server"
-msgstr "Servidor da autenticação do RADIUS"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Ler <code>/etc/ethers</code> para configurar o Servidor-<abbr title="
-"\"Protocolo de Configuração Dinâmica de Hosts\">DHCP</abbr>"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Realmente excluir esta interface? A exclusão não pode ser desfeita!\n"
-" Você poderá perder o acesso a este dispositivo se você estiver conectado "
-"através desta interface."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Realmente excluir esta interface Wireless? A exclusão não pode ser "
-"desfeita!\n"
-"Você poderá perder o acesso a este dispositivo se você estiver conectado "
-"através desta interface."
-
-msgid "Really reset all changes?"
-msgstr "Realmente limpar todas as mudanças?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Realmente desligar esta interface\"%s\" ?\n"
-"Você poderá perder o acesso a este dispositivo se você estiver conectado "
-"através desta interface."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Realmente desligar esta rede\"%s\" ?\n"
-"Você poderá perder o acesso a este dispositivo se você estiver conectado "
-"através desta interface."
-
-msgid "Really switch protocol?"
-msgstr "Realmente trocar o protocolo?"
-
-msgid "Realtime Connections"
-msgstr "Conexões em Tempo Real"
-
-msgid "Realtime Graphs"
-msgstr "Gráficos em Tempo Real"
-
-msgid "Realtime Load"
-msgstr "Carga em Tempo Real"
-
-msgid "Realtime Traffic"
-msgstr "Tráfego em Tempo Real"
-
-msgid "Realtime Wireless"
-msgstr "Rede sem fio em Tempo Real"
-
-msgid "Rebind protection"
-msgstr "Proteção contra \"Rebind\""
-
-msgid "Reboot"
-msgstr "Reiniciar"
-
-msgid "Rebooting..."
-msgstr "Reiniciando..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Reinicia o sistema operacional do seu dispositivo"
-
-msgid "Receive"
-msgstr "Receber"
-
-msgid "Receiver Antenna"
-msgstr "Antena de Recepção"
-
-msgid "Reconnect this interface"
-msgstr "Reconectar esta interface"
-
-msgid "Reconnecting interface"
-msgstr "Reconectando interface"
-
-msgid "References"
-msgstr "Referências"
-
-msgid "Regulatory Domain"
-msgstr "Domínio Regulatório"
-
-msgid "Relay"
-msgstr "Retransmissor"
-
-msgid "Relay Bridge"
-msgstr "Ponte por Retransmissão"
-
-msgid "Relay between networks"
-msgstr "Encaminha o tráfego entre as redes"
-
-msgid "Relay bridge"
-msgstr "Ponte por retransmissão"
-
-msgid "Remote IPv4 address"
-msgstr "Endereço IPv4 remoto"
-
-msgid "Remove"
-msgstr "Remover"
-
-msgid "Repeat scan"
-msgstr "Repetir busca"
-
-msgid "Replace entry"
-msgstr "Substituir entrada"
-
-msgid "Replace wireless configuration"
-msgstr "Substituir a configuração da rede sem fio"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Requerido para alguns provedores de internet, ex. Charter com DOCSIS 3"
-
-msgid "Reset"
-msgstr "Limpar"
-
-msgid "Reset Counters"
-msgstr "Reiniciar contadores"
-
-msgid "Reset to defaults"
-msgstr "Redefinir para os valores padrão"
-
-msgid "Resolv and Hosts Files"
-msgstr "Arquivos de Resolv e Hosts"
-
-msgid "Resolve file"
-msgstr "Arquivo Resolv"
-
-msgid "Restart"
-msgstr "Reiniciar"
-
-msgid "Restart Firewall"
-msgstr "Reiniciar o firewall"
-
-msgid "Restore backup"
-msgstr "Restaurar backup"
-
-msgid "Reveal/hide password"
-msgstr "Relevar/esconder senha"
-
-msgid "Revert"
-msgstr "Reverter"
-
-msgid "Root"
-msgstr "Raiz"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Diretório raiz para arquivos disponibilizados pelo TFTP"
-
-msgid "Router Model"
-msgstr "Modelo do Roteador"
-
-msgid "Router Name"
-msgstr "Nome do Roteador"
-
-msgid "Router Password"
-msgstr "Senha do Roteador"
-
-msgid "Routes"
-msgstr "Rotas"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"As rotas especificam através de qual interface e roteador um certo destino "
-"podem ser alcançado."
-
-msgid "Rule #"
-msgstr "Regra #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-"Execute a verificação do sistema de arquivos antes da montagem do dispositivo"
-
-msgid "Run filesystem check"
-msgstr "Execute a verificação do sistema de arquivos "
-
-msgid "SSH Access"
-msgstr "Acesso SSH"
-
-msgid "SSH-Keys"
-msgstr "Chaves SSH"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Salvar"
-
-msgid "Save & Apply"
-msgstr "Salvar & Aplicar"
-
-msgid "Save &#38; Apply"
-msgstr "Save &#38; Aplicar"
-
-msgid "Scan"
-msgstr "Procurar"
-
-msgid "Scheduled Tasks"
-msgstr "Tarefas Agendadas"
-
-msgid "Section added"
-msgstr "Seção adicionada"
-
-msgid "Section removed"
-msgstr "Seção removida"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Veja o manual (man) do comando \"mount\" para detalhes"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"Enviar requisições de eco do LCP no dado intervalo em segundos. Somente "
-"efetivo em conjunto com o limite de falhas."
-
-msgid "Send router solicitations"
-msgstr "Enviar solicitações de roteador"
-
-msgid "Separate Clients"
-msgstr "Isolar Clientes"
-
-msgid "Separate WDS"
-msgstr "Separar WDS"
-
-msgid "Server Settings"
-msgstr "Configurações do Servidor"
-
-msgid "Service Name"
-msgstr "Nome do Serviço"
-
-msgid "Service Type"
-msgstr "Tipo do Serviço"
-
-msgid "Services"
-msgstr "Serviços"
-
-msgid "Setup DHCP Server"
-msgstr "Configurar Servidor DHCP"
-
-msgid "Setup Time Synchronization"
-msgstr "Configurar a Sincronização do Horário"
-
-msgid "Show current backup file list"
-msgstr "Mostra alista de arquivos para backup atual"
-
-msgid "Shutdown this interface"
-msgstr "Desligar esta interface"
-
-msgid "Shutdown this network"
-msgstr "Desligar esta rede"
-
-msgid "Signal"
-msgstr "Sinal"
-
-msgid "Signal:"
-msgstr "Sinal:"
-
-msgid "Size"
-msgstr "Tamanho"
-
-msgid "Skip"
-msgstr "Pular"
-
-msgid "Skip to content"
-msgstr "Pular para o conteúdo"
-
-msgid "Skip to navigation"
-msgstr "Pular para a navegação"
-
-msgid "Slot time"
-msgstr "Intervalo de tempo"
-
-msgid "Software"
-msgstr "Software"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Alguns campos estão inválidos e os valores não podem ser salvos!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Desculpe o objeto solicitado não foi encontrado"
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Desculpe, o servidor encontrou um erro inesperado."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"Sinto muito, não existe suporte para o sysupgrade. Uma nova imagem de "
-"firmware deve ser gravada manualmente. Por favor, consulte a wiki do OpenWrt "
-"para instruções específicas da instalação deste dispositivo."
-
-msgid "Sort"
-msgstr "Ordenar"
-
-msgid "Source"
-msgstr "Origem"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-"Especifica o tempo de vida, em segundos, do prefixo preferencial anunciado"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Especifica o tempo de vida, em segundos, do prefixo válido anunciado"
-
-msgid "Specifies the button state to handle"
-msgstr "Especifica o estado do botão para ser tratado"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Especifica o diretório que o dispositivo está conectado"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Especifica a porta de escuta deste <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Especifica a quantidade máxima de requisições ARP falhadas antes de "
-"considerar que um equipamento está morto"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-"Especifica a quantidade máxima de segundos antes de considerar que um "
-"equipamento está morto"
-
-msgid "Specify the secret encryption key here."
-msgstr "Especifique a chave de cifragem secreta aqui."
-
-msgid "Start"
-msgstr "Iniciar"
-
-msgid "Start priority"
-msgstr "Prioridade de inicialização"
-
-msgid "Startup"
-msgstr "Inicialização"
-
-msgid "Static IPv4 Routes"
-msgstr "Rotas Estáticas IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Rotas Estáticas IPv6"
-
-msgid "Static Leases"
-msgstr "Atribuições Estáticas"
-
-msgid "Static Routes"
-msgstr "Rotas Estáticas"
-
-msgid "Static WDS"
-msgstr "WDS Estático"
-
-msgid "Static address"
-msgstr "Endereço Estático"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Atribuições estáticas são usadas para definir um endereço IP fixo e nome "
-"simbólico para os clientes do DHCP. Elas também são necessárias para "
-"configurações não dinâmicas onde um computador com a atribuição "
-"correspondente é provido."
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Stop"
-msgstr "Parar"
-
-msgid "Strict order"
-msgstr "Ordem Exata"
-
-msgid "Submit"
-msgstr "Enviar"
-
-msgid "Swap Entry"
-msgstr "Entrada do espaço de troca (Swap)"
-
-msgid "Switch"
-msgstr "Switch"
-
-msgid "Switch %q"
-msgstr "Switch %q"
-
-msgid "Switch %q (%s)"
-msgstr "Switch %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Trocar o protocolo"
-
-msgid "Sync with browser"
-msgstr "Sincronizar com o navegador"
-
-msgid "Synchronizing..."
-msgstr "Sincronizando..."
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "System Log"
-msgstr "Registo do Sistema"
-
-msgid "System Properties"
-msgstr "Propriedades do Sistema"
-
-msgid "System log buffer size"
-msgstr "Tamanho do buffer de registro do sistema"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Configurações do TFTP"
-
-msgid "TFTP server root"
-msgstr "Raiz do servidor TFTP"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "Taxa de TX"
-
-msgid "Table"
-msgstr "Tabela"
-
-msgid "Target"
-msgstr "Destino"
-
-msgid "Terminate"
-msgstr "Terminar"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"A seção da <em>Configuração do Dispositivo</em> engloba as configurações "
-"físicas do rádio como canal, potência de transmissão ou seleção da antena. "
-"Estas configurações são compartilhadas entre todas as redes sem fio (se o "
-"hardware for capaz de utilizar múltiplas SSID). As configurações específicas "
-"de cada rede, como cifragem ou modo de operação estão agrupadas na "
-"<em>Configuração da Interface</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"O pacote <em>libiwinfo-lua</em> não está instalado. Você precisa instalar "
-"este componente para ter uma configuração da rede sem fio funcional!"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"O prefixo IPv6 atribuído pelo provedor, geralmente termina com<code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Os caracteres permitidos são: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> e <code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"O arquivo do dispositivo de armazenamento ou da partição (<abbr title=\"por "
-"exemplo\">ex.</abbr> <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"O sistema de arquivos que foi usado para formatar a unidade de armazenamento "
-"(<abbr title=\"por exemplo\">ex.</abbr> <samp><abbr title=\"Sistema de "
-"Arquivos ext3\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"A imagem do firmware foi enviada. Abaixo estão a soma de verificação "
-"(checksum) e o tamanho dom arquivo. Compare-os com o arquivo original para "
-"garantir a integridade dos dados. <br /> Clique em \"Proceder\" para iniciar "
-"o procedimetno de gravação."
-
-msgid "The following changes have been committed"
-msgstr "As seguintes mudanças foram aplicadas"
-
-msgid "The following changes have been reverted"
-msgstr "As seguintes alterações foram revertidas"
-
-msgid "The following rules are currently active on this system."
-msgstr "As seguintes regras estão atualmente ativas neste sistema."
-
-msgid "The given network name is not unique"
-msgstr "O nome de rede informado não é único"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"Este equipamento não é capaz de utilizar SSID múltiplos e as configurações "
-"existentes serão substituídas se você proceder."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-"O comprimento do prefixo IPv4 em bits, o restante é usado nos endereços IPv6."
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "O comprimento do prefixo IPv6 em bits"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"As portas de rede neste dispositivo podem ser configuradas em diversas <abbr "
-"title=\"Virtual local Network\">VLAN</abbr>s nas quais computadores em uma "
-"mesma <abbr title=\"Virtual local Network\">VLAN</abbr> podem se comunicar "
-"diretamente. <abbr title=\"Virtual local Network\">VLAN</abbr>s são muitas "
-"vezes utilizadas para separar diferentes segmentos de rede. Em geral, existe "
-"uma porta para o enlace superior (uplink) e as demais portas são utilizadas "
-"para a rede local."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "O protocolo selecionado necessita estar associado a um dispositivo"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"O sistema está apagando agora a partição da configuração e irá reiniciar "
-"quando terminado."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"O sistema está gravando o firmware para a flash.<br /> NÃO DESLIGUE O "
-"EQUIPAMENTO!<br /> Espere alguns minutos até tentar reconectar. Dependendo "
-"da sua configuração, pode ser necessário renovar o endereço do seu "
-"computador para poder conectar novamente ao roteador."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"A imagem carregada não contém um formato suportado. Confirme que você "
-"escolheu uma imagem para a sua plataforma."
-
-msgid "There are no active leases."
-msgstr "Não existem atribuições ativas."
-
-msgid "There are no pending changes to apply!"
-msgstr "Não existem modificações pendentes para aplicar!"
-
-msgid "There are no pending changes to revert!"
-msgstr "Não existem modificações pendentes para reverter!"
-
-msgid "There are no pending changes!"
-msgstr "Não existem modificações pendentes!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Ainda não existe um dispositivo associado. Por favor, associe um dispositivo "
-"de rede na aba \"Configurações Físicas\""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Não existem uma senha definida para este roteador. Por favor, configure uma "
-"senha para o root para proteger a interface WEB e habilitar o SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr "Este endereço IPv4 do repassar"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Esta é a lista dos padrões de expressão shell para casar com os arquivos e "
-"diretórios incluídos durante a atualização do sistema. Arquivos modificados "
-"em /etc/config/ e alguns outros arquivos de configuração são automaticamente "
-"preservados."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"Este é o identificador do usuário de 32 bytes codificado em hexadecimal, não "
-"o nome do usuário"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Este é o conteúdo do /etc/rc.local. Insira seus próprios comandos aqui "
-"(antes de 'exit 0') para executá-los no final do processo de boot."
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"Este é o endereço da ponta local designado pelo agente de túnel. normalmente "
-"ele termina com <code>:2</code>"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Este é o único <abbr title=\"Protocolo de Configuração Dinâmica de Hosts"
-"\">DHCP</abbr> na rede local"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "Este é o sistema de agendamento de tarefas."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-"Este é normalmente o endereço do <abbr title=\"Point of Presence, Ponto de "
-"Presença\">PoP</abbr> mais próximo operado pelo agente de túnel"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"Esta lista fornece uma visão geral sobre os processos em execução no sistema."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-"Esta página permite a configuração de ações personalizadas para os botões"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "Esta página fornece informações sobre as conexões de rede ativas."
-
-msgid "This section contains no values yet"
-msgstr "Esta seção ainda não contêm valores"
-
-msgid "Time Synchronization"
-msgstr "Sincronização de horário"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "A sincronização do horário ainda não está configurada."
-
-msgid "Timezone"
-msgstr "Fuso Horário"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Para recuperar os arquivos de configuração, você pode enviar aqui um backup "
-"anterior."
-
-msgid "Total Available"
-msgstr "Total Disponível"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "Tráfego"
-
-msgid "Transfer"
-msgstr "Transferências"
-
-msgid "Transmission Rate"
-msgstr "Taxa de Transmissão"
-
-msgid "Transmit"
-msgstr "Transmitir"
-
-msgid "Transmit Power"
-msgstr "Potência de Transmissão"
-
-msgid "Transmitter Antenna"
-msgstr "Antena de Transmissão"
-
-msgid "Trigger"
-msgstr "Disparo"
-
-msgid "Trigger Mode"
-msgstr "Modo de disparo"
-
-msgid "Tunnel ID"
-msgstr "Identificador do Túnel"
-
-msgid "Tunnel Interface"
-msgstr "Interface de Tunelamento"
-
-msgid "Turbo Mode"
-msgstr "Modo Turbo"
-
-msgid "Tx-Power"
-msgstr "Potência de transmissão"
-
-msgid "Type"
-msgstr "Tipo"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "UMTS somente"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "Dispositivo USB"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Não é possível a expedição"
-
-msgid "Unknown"
-msgstr "Desconhecido"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Erro Desconhecido, a senha não foi alterada!"
-
-msgid "Unmanaged"
-msgstr "Não gerenciado"
-
-msgid "Unsaved Changes"
-msgstr "Alterações Não Salvas"
-
-msgid "Unsupported protocol type."
-msgstr "Tipo de protocolo não suportado."
-
-msgid "Update lists"
-msgstr "Atualizar listas"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Envia uma imagem compatível do sistema para substituir o firmware em "
-"execução. Marque \"Manter configurações\" para manter as configurações "
-"atuais (requer uma imagem OpenWrt compatível)."
-
-msgid "Upload archive..."
-msgstr "Enviar arquivo..."
-
-msgid "Uploaded File"
-msgstr "Arquivo Carregado"
-
-msgid "Uptime"
-msgstr "Tempo de atividade"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Usar <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Use o roteador do DHCP"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Use os servidores DNS anunciados pelo parceiro"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Usar códigos de países ISO/IEC 3166 alpha2."
-
-msgid "Use MTU on tunnel interface"
-msgstr "Use MTU na interface do túnel"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Use TTL na interface do túnel"
-
-msgid "Use as root filesystem"
-msgstr "Usar como sistema de arquivos raiz"
-
-msgid "Use broadcast flag"
-msgstr "Use a marcação de broadcast"
-
-msgid "Use custom DNS servers"
-msgstr "Use servidores DNS personalizados"
-
-msgid "Use default gateway"
-msgstr "Use o roteador padrão"
-
-msgid "Use gateway metric"
-msgstr "Use a métrica do roteador"
-
-msgid "Use preferred lifetime"
-msgstr "Use o tempo de vida preferencial"
-
-msgid "Use routing table"
-msgstr "Use a tabela de roteamento"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Use o botão <em>Adicionar</em> para adicionar uma nova entrada de "
-"atribuição. O endereço <em>MAC-Address</em> identifica o equipamento, o "
-"endereço <em>IPv4</em> especifica o endereço fixo para usar e o <em>nome do "
-"equipamento</em> é designado como nome simbólico (DNS) para o equipamento "
-"requisitante."
-
-msgid "Use valid lifetime"
-msgstr "Use o tempo de vida válido"
-
-msgid "Used"
-msgstr "Usado"
-
-msgid "Used Key Slot"
-msgstr "Posição da Chave Usada"
-
-msgid "Username"
-msgstr "Usuário"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Interface VLAN"
-
-msgid "VLANs on %q"
-msgstr "VLANs em %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLANs em %q (%s)"
-
-msgid "VPN Server"
-msgstr "Servidor VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "Classe do fabricante para enviar quando requisitar o DHCP"
-
-msgid "Verify"
-msgstr "Verificar"
-
-msgid "Version"
-msgstr "Versão"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "WEP Sistema Aberto"
-
-msgid "WEP Shared Key"
-msgstr "WEP Chave Compartilhada"
-
-msgid "WEP passphrase"
-msgstr "WEP Senha"
-
-msgid "WMM Mode"
-msgstr "Modo WMM"
-
-msgid "WPA passphrase"
-msgstr "WPA Senha"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"A cifragem WPA requer a instalação do wpa_supplicant (para modo cliente) ou "
-"do hostapd (para modo AP ou ad-hoc)."
-
-msgid "Waiting for changes to be applied..."
-msgstr "Esperando a aplicação das mudanças..."
-
-msgid "Waiting for command to complete..."
-msgstr "Esperando o término do comando..."
-
-msgid "Warning"
-msgstr "Atenção"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Aviso: Existem alterações não salvas que serão perdidas durante a "
-"reinicialização!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr "Rede sem fio"
-
-msgid "Wireless Adapter"
-msgstr "Dispositivo de Rede sem Fio"
-
-msgid "Wireless Network"
-msgstr "Rede sem Fio"
-
-msgid "Wireless Overview"
-msgstr "Visão Geral da Rede sem Fio"
-
-msgid "Wireless Security"
-msgstr "Segurança da Rede sem Fio"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Rede sem fio está desabilitada ou não conectada"
-
-msgid "Wireless is restarting..."
-msgstr "A rede sem fio está reiniciando..."
-
-msgid "Wireless network is disabled"
-msgstr "A rede sem fio está desabilitada"
-
-msgid "Wireless network is enabled"
-msgstr "A rede sem fio está habilitada"
-
-msgid "Wireless restarted"
-msgstr "A rede sem fio reiniciou"
-
-msgid "Wireless shut down"
-msgstr "Rede sem fio desligada"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Escreva as requisições DNS para o servidor de registro (syslog)"
-
-msgid "XR Support"
-msgstr "Suporte a XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Neste local, você pode ativar ou desativar os scripts de inicialização "
-"instalados. As mudanças serão aplicadas após a reinicialização do "
-"equipamento.<br /><strong>Aviso: Se você desativar algum script de "
-"inicialização essencial como por exemplo \"rede/network\", o dispositivo "
-"poderá tornar-se inacessível!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Você precisa habilitar o JavaScript no seu navegador ou o LuCI não irá "
-"funcionar corretamente."
-
-msgid "any"
-msgstr "qualquer"
-
-msgid "auto"
-msgstr "automático"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "em ponte"
-
-msgid "create:"
-msgstr "criar"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "cria uma ponte sobre determinada(s) interface(s)"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "desativar"
-
-msgid "expired"
-msgstr "expirado"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"Arquivo onde as atribuições <abbr title=\"Protocolo de Configuração Dinâmica "
-"de Hosts\">DHCP</abbr> são armazenadas"
-
-msgid "forward"
-msgstr "encaminhar"
-
-msgid "full-duplex"
-msgstr "full-duplex"
-
-msgid "half-duplex"
-msgstr "half-duplex"
-
-msgid "help"
-msgstr "ajuda"
-
-msgid "hidden"
-msgstr "ocultar"
-
-msgid "if target is a network"
-msgstr "se o destino for uma rede"
-
-msgid "input"
-msgstr "entrada"
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-"Arquivo local de <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-# Is this yes/no or no like in no one?
-msgid "no"
-msgstr "não"
-
-msgid "no link"
-msgstr "sem link"
-
-msgid "none"
-msgstr "nenhum"
-
-msgid "off"
-msgstr "desligado"
-
-msgid "on"
-msgstr "ligado"
-
-msgid "open"
-msgstr "aberto"
-
-msgid "routed"
-msgstr "roteado"
-
-msgid "tagged"
-msgstr "etiquetado"
-
-msgid "unknown"
-msgstr "desconhecido"
-
-msgid "unlimited"
-msgstr "ilimitado"
-
-msgid "unspecified"
-msgstr "não especificado"
-
-msgid "unspecified -or- create:"
-msgstr "não especificado -ou- criar:"
-
-msgid "untagged"
-msgstr "não etiquetado"
-
-msgid "yes"
-msgstr "sim"
-
-msgid "« Back"
-msgstr "« Voltar"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Esperando pelo roteador..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Ativar o servidor NTP embutido"
-
-#~ msgid "Active Leases"
-#~ msgstr "Atribuições Ativas"
-
-#~ msgid "Open"
-#~ msgstr "Abrir"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Taxa de Bits"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Configuração / Aplicar"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Configuração / Mudanças"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Configuração / Reverter"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "Endereço Físico (MAC)"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encriptado\">Encr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Rede Local Sem FIo\">WLAN</abbr>-Pesquisa"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Escolha a rede que você quer associar com esta interface de rede sem fio. "
-#~ "Selecione <em>não especificado</em> para não ligar a interface a qualquer "
-#~ "rede ou preencha o campo <em>criar</em> para definir uma nova rede."
-
-#~ msgid "Create Network"
-#~ msgstr "Criar Rede"
-
-#~ msgid "Link"
-#~ msgstr "Enlace"
-
-#~ msgid "Networks"
-#~ msgstr "Redes"
-
-#~ msgid "Power"
-#~ msgstr "Potência"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Redes Wifi no seu ambiente local"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "Notação <abbr title=\"Roteamento entre Domínios sem Classe\">CIDR</abbr>: "
-#~ "endereço/prefixo"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "Servidor <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr ""
-#~ "Broadcast <abbr title=\"Protocolo de Internet Versão 4\">IPv4</abbr>"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Endereço <abbr title=\"Protocolo de Internet Versão 6\">IPv6</abbr>"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "Endereços IP alternativos"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Configuração do IPv6"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Nota: Se você escolher a interface aqui que é pertencente a outra rede, "
-#~ "ela será movida para esta rede."
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Você realmente deseja apagar esta interface? A operação não pode ser "
-#~ "revertida!\\nVocê pode perder acesso a este roteador se voc6e está "
-#~ "conectado através desta interface."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Você realmente deseja apagar esta rede sem fio? A operação não pode ser "
-#~ "revertida!\\nVocê pode perder acesso a este roteador se voc6e está "
-#~ "conectado através desta interface."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Você realmente deseja desligar a interface \"%s\"?\\nVocê pode perder "
-#~ "acesso a este roteador se voc6e está conectado através desta interface."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Você realmente deseja desligar a rede?\\nVocê pode perder acesso a este "
-#~ "roteador se voc6e está conectado através desta rede."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "As portas de rede do seu router podem ser combinadas com diversas <abbr "
-#~ "title=\"Rede Local Virtual\">VLAN</abbr>s em que os computadores podem "
-#~ "comunicar diretamente entre si. As <abbr title=\"Rede Local Virtual"
-#~ "\">VLAN</abbr>s são frequentemente utilizadas para separar segmentos de "
-#~ "redes diferentes. Muitas vezes é padrão uma porta para o enlace superior "
-#~ "(Uplink) para a conexão com a próxima rede maior, como a Internet. As "
-#~ "outras portas são, por padrão, utilizadas para conectar uma rede local."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Ativar bufferização"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6-over-IPv4"
-
-#~ msgid "Custom Files"
-#~ msgstr "Arquivos Personalizados"
-
-#~ msgid "Custom files"
-#~ msgstr "Arquivos personalizados"
-
-#~ msgid "Detected Files"
-#~ msgstr "Arquivos Detectados"
-
-#~ msgid "Detected files"
-#~ msgstr "Arquivos detectados"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Arquivos que devem ser mantidos quando gravar um novo firmware"
-
-#~ msgid "General"
-#~ msgstr "Geral"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Aqui você pode personalizar as configurações e funcionalidades do <abbr "
-#~ "title=\"Interface de configuração Lua\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Ações após a gravação"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr ""
-#~ "Os seguintes arquivos foram detectados pelo sistema e serão mantidos "
-#~ "automaticamente durante uma atualização do sistema"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Estes comandos são executados automaticamente quando uma determinada "
-#~ "configuração da <abbr title=\"Interface de configuração unificada\">UCI</"
-#~ "abbr> está gravada, permitindo mudanças a serem aplicadas "
-#~ "instantaneamente."
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr ""
-#~ "Esta é a lista dos padrões de expressão shell para casar com os arquivos "
-#~ "e diretórios incluídos durante a atualização do sistema"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Interface Web"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "Servidor <abbr title=\"Protocolo de Tunelamento Ponto a Ponto\">PPTP</"
-#~ "abbr>"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "Configurações AHCP"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "Retentativa de ping ARP"
-
-#~ msgid "ATM Settings"
-#~ msgstr "Configurações ATM"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "Aceita anúncios de roteador"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Ponto de acesso (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Opções adicionais do pppd"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "A faixa permitida é de 1 a FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Desconexão automática"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Arquivo de Backup"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configurar o servidor DNS local para usar o servidores de nomes "
-#~ "fornecidos pelo PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Script de conexão"
-
-#~ msgid "Create backup"
-#~ msgstr "Criar backup"
-
-#~ msgid "Default"
-#~ msgstr "Padrão"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Script de desconexão"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Editar listas de pacotes e destinos da instalação"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "Ativar VLANs 4K"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Ativar IPv6 na conexão PPP"
-
-#~ msgid "Firmware image"
-#~ msgstr "Imagem de Firmware"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "Encaminhar DHCP"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "Encaminhar broadcast"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "HE.net Tunnel ID"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Aqui você pode fazer o backup e restaurar as configurações do router. "
-#~ "Também pode retornar o router para as configurações padrão."
-
-#~ msgid "Installation targets"
-#~ msgstr "Destinos da Instalação"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Manter arquivos de configuração"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Manter conectada"
-
-#~ msgid "Kernel"
-#~ msgstr "Kernel"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Permitir o pppd substituir a rota padrão atual e usar a interface PPP "
-#~ "como padrão após a conexão ser efeuada com sucesso"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr ""
-#~ "Deixar o pppd executar este script após o estabelecimento do enlace PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Deixar o pppd executar este script antes de terminar o enlace PPP"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Certifique-se que forneceu o código PIN correcto aqui, ou pode bloquear o "
-#~ "seu cartão SIM!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "A maioria deles são servidores de rede, que oferecem um determinado "
-#~ "serviço para seu equipamento ou rede como acesso shell, servindo páginas "
-#~ "web como o <abbr title=\"Interface de configuração Lua\">LuCI</abbr>, "
-#~ "fazendo roteamento, enviando e-mails, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Número de testes de conexão falhadas para iniciar a reconexão automática"
-
-#~ msgid "Override Gateway"
-#~ msgstr "Sobrescrever Gateway"
-
-#~ msgid "PIN code"
-#~ msgstr "Código PIN"
-
-#~ msgid "PPP Settings"
-#~ msgstr "Configurações do PPP"
-
-#~ msgid "Package lists"
-#~ msgstr "Listas de pacotes"
-
-#~ msgid ""
-#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
-#~ "VLAN ID added to received untagged frames."
-#~ msgstr ""
-#~ "O <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> da porta especifica o ID "
-#~ "padrão da VLAN adicionado a quadros sem etiquetas."
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "PVIDs da Porta em %q"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Proceder com a restauração das configurações padrão do firmware?"
-
-#~ msgid "Processor"
-#~ msgstr "Processador"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Porta RADIUS"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Servidor RADIUS"
-
-#~ msgid "Relay Settings"
-#~ msgstr "Configuração de Relay"
-
-#~ msgid "Replace default route"
-#~ msgstr "Substituir a rota padrão"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Restaurar as configurações para o padrão"
-
-#~ msgid "Routing table ID"
-#~ msgstr "ID da tabela de roteamento"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Segundos de espera para o modem ficar pronto antes de tentar uma conexão"
-
-#~ msgid "Send Router Solicitiations"
-#~ msgstr "Enviar Solicitações de Roteador"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "Endereço IPv4 do Servidor"
-
-#~ msgid "Service type"
-#~ msgstr "Tipo de serviço"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Serviços executam diversas tarefas no seu equipamento."
-
-#~ msgid "Settings"
-#~ msgstr "Configurações"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Configurar tempo de espera"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Lamentamos, mas o OpenWrt não suporta uma atualização do sistema para "
-#~ "esta plataforma.<br /> É necessário gravar manualmente seu equipamento."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr ""
-#~ "Especifique os argumentos adicionais de linha de comando para o pppd aqui"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "O caminho do dispositivo do seu modem, ex. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "Tempo (em segundos) para fim de uma conexão já não utilizada"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "Servidor de Hora (rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "Configurações de Tunelamento"
-
-#~ msgid "Update package lists"
-#~ msgstr "Atualizar listas de pacotes"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Carregar uma imagem OpenWrt para a gravar no roteador."
-
-#~ msgid "Upload image"
-#~ msgstr "Carregar imagem"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Utilizar DNS do parceiro"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr ""
-#~ "Você pode especificar aqui múltiplos servidores DNS. Pressione \"enter\" "
-#~ "para adicionar uma nova entrada. Os servidores informados aqui "
-#~ "sobrescreverão automaticamente os designados."
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Você precisa instalar os pacotes \"comgt\" para usar UMTS/GPRS, \"ppp-mod-"
-#~ "pppoe\" para PPPoE, \"ppp-mod-pppoa\" para PPPoA ou \"pptp\" para o "
-#~ "suporte PPtP"
-
-#~ msgid "back"
-#~ msgstr "voltar"
-
-#~ msgid "buffered"
-#~ msgstr "em buffer"
-
-#~ msgid "cached"
-#~ msgstr "em cache"
-
-#~ msgid "free"
-#~ msgstr "livre"
-
-#~ msgid "static"
-#~ msgstr "estático"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Interface de configuração Lua\">LuCI</abbr> é uma colecção "
-#~ "gratuita de programas Lua incluindo um Framework Web <abbr title=\"Modelo-"
-#~ "Visualização-Controle\">MVC</abbr> e uma Interface Web para micro-"
-#~ "dispositivos. <abbr title=\"Interface de configuração Lua\">LuCI</abbr> é "
-#~ "licenciado sob a Licença Apache."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "Chaves-<abbr title=\"Shell Seguro\">SSH</abbr>"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Um servidor web HTTP/1.1 ligeiro escrito em C e desenvolvido em Lua para "
-#~ "servir LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Um pequeno servidor web que pode ser utilizado para servir a interface "
-#~ "<abbr title=\"Interface de configuração Lua\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "Sobre"
-
-#~ msgid "Addresses"
-#~ msgstr "Endereços"
-
-#~ msgid "Admin Password"
-#~ msgstr "Password do Administrador"
-
-#~ msgid "Alias"
-#~ msgstr "Configuração IP alternativa"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Área de autenticação"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Porta do interface em ponte"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Altera a senha do administrador do sistema (Login <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Cliente (WDS)"
-
-#~ msgid "Configuration file"
-#~ msgstr "Ficheiro de configuração"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Esgotado o tempo de ligação"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Programadores Contribuintes"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP atribuido"
-
-#~ msgid "Document root"
-#~ msgstr "Diretório raiz"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Activar keep-alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Ponte Ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Aqui pode colar suas Chaves-<abbr title=\"Shell Seguro\">SSH</abbr> "
-#~ "públicas (uma por linha) para a autenticação <abbr title=\"Shell Seguro"
-#~ "\">SSH</abbr> por chave-pública."
-
-#~ msgid "ID"
-#~ msgstr "Identificação de interface em ponte"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Configuração IP"
-
-#~ msgid "Interface Status"
-#~ msgstr ""
-#~ "Aqui encontra informações sobre o estado actual do sistema, como <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr>, frequência do relógio, uso "
-#~ "de memória ou uso da interface de rede de dados."
-
-#~ msgid "Lead Development"
-#~ msgstr "Equipa de Desenvolvimento"
-
-#~ msgid "Master"
-#~ msgstr "AP"
-
-#~ msgid "Master + WDS"
-#~ msgstr "AP+WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "Não configurado"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Senha alterada com sucesso"
-
-#~ msgid "Plugin path"
-#~ msgstr "Directorio de plugins"
-
-#~ msgid "Ports"
-#~ msgstr "Portas"
-
-#~ msgid "Primary"
-#~ msgstr "Primário"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Página do Projecto"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Ahdemo"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Obrigado a"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "A área de autenticação (realm) que será mostrada na prompt de "
-#~ "autenticação das páginas protegidas."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Erro Desconhecido"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "padrão é <code>/etc/httpd.conf</code>"
-
-#~ msgid "Package lists updated"
-#~ msgstr "As listas de pacotes foram actualizadas"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Actualizar os pacotes instalados"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Também os arquivos de logs do kernel ou dos serviços podem ser "
-#~ "consultados aqui para obter uma visão geral sobre o seu estado actual."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Aqui você pode encontrar informações sobre o estado actual do sistema, "
-#~ "tais como <abbr title=\"Central Processing Unit\">CPU</abbr>, frequência "
-#~ "do relógio, uso de memória ou da interface de rede de dados."
-
-#~ msgid "Search file..."
-#~ msgstr "Procurar ficheiro..."
-
-# "free as in freedom" equivale a "livre de liberdade" não de "grátis"
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "O <abbr title=\"Interface de configuração Lua\">LuCI</abbr> é um "
-#~ "interface gráfico livre, flexível e fácil de utilizar para configurar o "
-#~ "OpenWrt Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "E agora divirta-se com o seu router!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Agradecemos os seus comentários e sugestões por forma a podermos "
-#~ "continuar a melhorar este interface."
-
-#~ msgid "Hello!"
-#~ msgstr "Olá!"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Aviso: No <abbr title=\"Interface de configuração Lua\">LuCI</abbr> as "
-#~ "alterações devem ser confirmadas clicando em Alterações - Salvar &amp; "
-#~ "Aplicar antes de serem aplicadas."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "Nas próximas páginas, pode ajustar todas as definições importantes do seu "
-#~ "router."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr ""
-#~ "A equipa do <abbr title=\"Interface de configuração Lua\">LuCI</abbr>"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Esta é a área de administração do <abbr title=\"Interface de configuração "
-#~ "Lua\">LuCI</abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Interface do Utilizador"
-
-#~ msgid "enable"
-#~ msgstr "activar"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr " (opcional)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "Porta do <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr>"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "Servidor <abbr title=\"Sistema de Nomes de Domínios\">DNS</abbr> será "
-#~ "consultado na ordem do arquivo resolv.conf"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"máximo\">max.</abbr> de <abbr title=\"Protocolo de "
-#~ "Configuração Dinâmica de Hosts\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "tamanho <abbr title=\"máximo\">max.</abbr> do pacote <abbr title="
-#~ "\"Mecanismos de Extensão do Sistema de Nomes de Domínios\">EDNS0</abbr>"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "Isolamento do AP"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Adicione a rede Wifi à rede física"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Criar Rede"
-
-#~ msgid "Devices"
-#~ msgstr "Dispositivos"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Não encaminhar as pesquisas reversas para redes locais"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Activar servidor TFTP"
-
-#~ msgid "Errors"
-#~ msgstr "Erros"
-
-#~ msgid "Essentials"
-#~ msgstr "Básico"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Expandir Hosts"
-
-#~ msgid "First leased address"
-#~ msgstr "Primeiro endereço de atribuição"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Resolve problemas com websites indisponíveis, submissão de formulários ou "
-#~ "comportamentos inesperados de alguns ISP's."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Endereço do Hardware"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Aqui pode configurar os dispositivos wifi instalados. "
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignorar <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Independente (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Ligação Internet"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Cliente (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Atribuições"
-
-#~ msgid "Local Domain"
-#~ msgstr "Domínio Local"
-
-#~ msgid "Local Network"
-#~ msgstr "Rede Local"
-
-#~ msgid "Local Server"
-#~ msgstr "Servidor Local"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Imagem para o boot remoto (PXE)"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Nome da Rede (<abbr title=\"Identificador de Conjunto de Serviços "
-#~ "Estendidos\">ESSID</abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Número de endereços atribuidos"
-
-#~ msgid "Path"
-#~ msgstr "Directório"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Executar Acções"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Impede a comunicação de Cliente para Cliente"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Ponto de Acesso (Access Point)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Ficheiro resolv.conf"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Directório raiz do servidor TFTP"
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Foram aplicadas as seguintes alterações "
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Quando gravar um novo firmware com o <abbr title=\"Interface de "
-#~ "configuração Lua\">LuCI</abbr> estes arquivos serão adicionados ao novo "
-#~ "firmware instalado."
-
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "Wireless"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Com o <abbr title=\"Protocolo de Configuração Dinâmica de Hosts\">DHCP</"
-#~ "abbr> os membros da rede podem automaticamente receber as suas "
-#~ "configurações de rede (endereço-<abbr title=\"Protocolo de Internet\">IP</"
-#~ "abbr>, netmask, servidor-<abbr title=\"Sistema de Nomes de Domínios"
-#~ "\">DNS</abbr>, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Pode servir várias redes wifi com o mesmo dispositivo. Esteja ciente de "
-#~ "que existem certas restrições específicas do hardware e do controlador. "
-#~ "Pode normalmente operar 1 rede Ad-Hoc ou até 3 redes AP e 1 Cliente "
-#~ "simultaneamente."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Precisa de instalar os pacotes \"ppp-mod-pppoe\" para PPPoE ou \"pptp\" "
-#~ "para o suporte PPtP"
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#~ msgid "additional hostfile"
-#~ msgstr "ficheiro de hosts adicional"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr ""
-#~ "Adiciona os nomes dos domínios às entradas de hosts no arquivo resolv.conf"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "estático"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "ligação automática"
-
-#~ msgid "concurrent queries"
-#~ msgstr "Consultas simultâneas"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "desabilitar <abbr title=\"Protocolo de Configuração Dinâmica de Hosts"
-#~ "\">DHCP</abbr> para esta interface"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "desligar quando ocioso por"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "Não fazer cache de desconhecidos"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "Filtro de consultas inuteis-<abbr title=\"Sistema de Nomes de Domínios"
-#~ "\">DNS</abbr> de sistemas windows"
-
-#~ msgid "installed"
-#~ msgstr "instalado"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "Localizar o hostname dependendo de sua sub-rede"
-
-#~ msgid "not installed"
-#~ msgstr "não instalado"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "Impede o cache de respostas-<abbr title=\"Sistema de Nomes de Domínios"
-#~ "\">DNS</abbr> negativas"
-
-#~ msgid "query port"
-#~ msgstr "porta para consultas"
-
-#~ msgid "transmitted / received"
-#~ msgstr "transmitido / recebido"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "redes contidas"
-
-#~ msgid "all"
-#~ msgstr "todos"
-
-#~ msgid "Code"
-#~ msgstr "Código"
-
-#~ msgid "Distance"
-#~ msgstr "Distância"
-
-#~ msgid "Legend"
-#~ msgstr "Legenda"
-
-#~ msgid "Library"
-#~ msgstr "Biblioteca"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "veja sobre &#39;%s&#39; na página de manual (man)"
-
-#~ msgid "Package Manager"
-#~ msgstr "Gestor de Pacotes"
-
-#~ msgid "Service"
-#~ msgstr "Serviço"
-
-#~ msgid "Statistics"
-#~ msgstr "Estatísticas"
-
-#~ msgid "zone"
-#~ msgstr "Zona"
diff --git a/po/pt_BR/commands.po b/po/pt_BR/commands.po
deleted file mode 100644
index 08b3d37..0000000
--- a/po/pt_BR/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/pt_BR/coovachilli.po b/po/pt_BR/coovachilli.po
deleted file mode 100644
index 9c21981..0000000
--- a/po/pt_BR/coovachilli.po
+++ /dev/null
@@ -1,657 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2011-10-18 20:37+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Configuração de rede"
-
-msgid "RADIUS configuration"
-msgstr "Configuração de RADIUS"
-
-msgid "UAM and MAC Authentication"
-msgstr "Autenticação UAM e MAC"
-
-#~ msgid "General configuration"
-#~ msgstr "Configuração Geral"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Definições gerais do CoovaChilli"
-
-#~ msgid "Command socket"
-#~ msgstr "Soquete de comando"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "Soquete UNIX para comunicação com chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Intervalo de atualização da configuração"
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Reler o arquivo de configuração e faça a busca DNS a cada intervalo de "
-#~ "segundos. Isto tem o mesmo efeito que o envio do sinal HUP. Se o "
-#~ "intervalo for 0, (zero) esta funcionalidade será desativada."
-
-#~ msgid "Pid file"
-#~ msgstr "Arquivo de PID"
-
-#~ msgid "Filename to put the process id"
-#~ msgstr "Nome do arquivo onde será armazenado o PID"
-
-#~ msgid "State directory"
-#~ msgstr "Diretório de estado"
-
-#~ msgid "Directory of non-volatile data"
-#~ msgstr "Diretório para dados não-voláteis"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "Configuração TUN/TAP"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Configuração de Rede/Tun"
-
-#~ msgid "Network down script"
-#~ msgstr "Script de descida de rede"
-
-#~ msgid ""
-#~ "Script executed after a session has moved from authorized state to "
-#~ "unauthorized"
-#~ msgstr ""
-#~ "Script executado após o estado de uma sessão ser alterado de autorizado "
-#~ "para não-autorizado"
-
-#~ msgid "Network up script"
-#~ msgstr "Script de subida da rede"
-
-#~ msgid "Script executed after the tun network interface has been brought up"
-#~ msgstr "Script executado após a interface tun de rede ter sido levantada"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Servidor DNS primário"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Servidor DNS secundário"
-
-#~ msgid "Domain name"
-#~ msgstr "Domínio"
-
-#~ msgid ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-#~ msgstr ""
-#~ "Usado para informar o cliente sobre o domínio a ser utilizado para "
-#~ "consultas DNS"
-
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Conjunto de endereços IP dinâmicos"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Especifica um conjunto de endereços IP dinâmicos"
-
-#~ msgid "IP down script"
-#~ msgstr "Script de descida da rede IP"
-
-#~ msgid "Script executed after the tun network interface has been taken down"
-#~ msgstr "Script executado após a rede da interface tun seja baixada"
-
-#~ msgid "IP up script"
-#~ msgstr "Script de subida da rede IP"
-
-#~ msgid ""
-#~ "Script executed after the TUN/TAP network interface has been brought up"
-#~ msgstr "Script executado após a rede da interface TUN/TAP seja levantadas"
-
-#~ msgid "Uplink subnet"
-#~ msgstr "Subrede do enlace superior (uplink)"
-
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr "Endereço de rede da interface do enlace superior (notação CIDR)"
-
-#~ msgid "Static IP address pool"
-#~ msgstr "Conjunto de endereços IP estáticos"
-
-#~ msgid "Specifies a pool of static IP addresses"
-#~ msgstr "Especifica um conjunto de endereços IP estáticos"
-
-#~ msgid "TUN/TAP device"
-#~ msgstr "Dispositivo TUN/TAP"
-
-#~ msgid "The specific device to use for the TUN/TAP interface"
-#~ msgstr "O dispositivo especificado para ser usado pela interface TUN/TAP"
-
-#~ msgid "TX queue length"
-#~ msgstr "Tamanho da fila de envio (TX)"
-
-#~ msgid "The TX queue length to set on the TUN/TAP interface"
-#~ msgstr "O tamanho da fila de envio (TX) para ser usado na interface TUN/TAP"
-
-#~ msgid "Use TAP device"
-#~ msgstr "Use dispositivo TAP"
-
-#~ msgid "Use the TAP interface instead of TUN"
-#~ msgstr "Use o dispositivo TAP ao invés de TUN"
-
-#~ msgid "DHCP configuration"
-#~ msgstr "Configuração do DHCP"
-
-#~ msgid "Set DHCP options for connecting clients"
-#~ msgstr "Ajusta as opções do DHCP para clientes a se conectarem"
-
-#~ msgid "DHCP end number"
-#~ msgstr "Número final do DHCP"
-
-#~ msgid "Where to stop assigning IP addresses (default 254)"
-#~ msgstr "Onde terminar a atribuição de endereços IP (padrão 254)"
-
-#~ msgid "DHCP interface"
-#~ msgstr "Interface DHCP"
-
-#~ msgid "Ethernet interface to listen to for the downlink interface"
-#~ msgstr "Interface Ethernet para escutar por conexões dos clientes"
-
-#~ msgid "Listen MAC address"
-#~ msgstr "Endereço MAC de escuta"
-
-#~ msgid ""
-#~ "MAC address to listen to. If not specified the MAC address of the "
-#~ "interface will be used"
-#~ msgstr ""
-#~ "Endereço MAC de escuta. Se não especificado, o endereço MAC da interface "
-#~ "será usado"
-
-#~ msgid "DHCP start number"
-#~ msgstr "Número inicial do DHCP"
-
-#~ msgid "Where to start assigning IP addresses (default 10)"
-#~ msgstr "A partir de onde iniciará a atribuição de endereços IP (padrão 10)"
-
-#~ msgid "Enable IEEE 802.1x"
-#~ msgstr "Habilite IEEE 802.1x"
-
-#~ msgid "Enable IEEE 802.1x authentication and listen for EAP requests"
-#~ msgstr "Habilite autenticação IEEE 802.1x e escute por requisições EAP"
-
-#~ msgid "Leasetime"
-#~ msgstr "Tempo de atribuição"
-
-#~ msgid "Use a DHCP lease of seconds (default 600)"
-#~ msgstr "Use o tempo de atribuição do DHCP, em segundos (padrão 600)"
-
-#~ msgid "Allow session update through RADIUS"
-#~ msgstr "Permite a atualização da sessão através do RADIUS"
-
-#~ msgid ""
-#~ "Allow updating of session parameters with RADIUS attributes sent in "
-#~ "Accounting-Response"
-#~ msgstr ""
-#~ "Permite a atualização dos parâmetros da sessão com atributos RADIUS "
-#~ "enviados na Contabilidade-Resposta"
-
-#~ msgid "Admin password"
-#~ msgstr "Senha do Administrador"
-
-#~ msgid ""
-#~ "Password to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Senha para a autenticação do usuário administrador para pegar as "
-#~ "configurações do chili e estabelecer uma sessão de dispositivo \"sistema\""
-
-#~ msgid "Admin user"
-#~ msgstr "Usuário administrador"
-
-#~ msgid ""
-#~ "User-name to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Nome do usuário para a autenticação do usuário administrador para pegar "
-#~ "as configurações do chili e estabelecer uma sessão de dispositivo "
-#~ "\"sistema\""
-
-#~ msgid "Do not check disconnection requests"
-#~ msgstr "Não verifique as requisições de desconexão"
-
-#~ msgid "Do not check the source IP address of radius disconnect requests"
-#~ msgstr ""
-#~ "Não verifique o endereço IP de origem das requisições de desconexão do "
-#~ "radius"
-
-#~ msgid "RADIUS disconnect port"
-#~ msgstr "Porta de desconexão do RADIUS"
-
-#~ msgid "UDP port to listen to for accepting radius disconnect requests"
-#~ msgstr ""
-#~ "Porta UDP de escuta para aceitar requisições de desconexão do radius"
-
-#~ msgid "NAS IP"
-#~ msgstr "IP do NAS"
-
-#~ msgid "Value to use in RADIUS NAS-IP-Address attribute"
-#~ msgstr "Valor para usar no atributo NAS-IP-Address do RADIUS"
-
-#~ msgid "NAS MAC"
-#~ msgstr "MAC do NAS"
-
-#~ msgid "MAC address value to use in RADIUS Called-Station-ID attribute"
-#~ msgstr "Endereço MAC para usar no atributo Called-Station-ID do RADIUS"
-
-#~ msgid "Allow OpenID authentication"
-#~ msgstr "Permitir autenticação OpenID"
-
-#~ msgid ""
-#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
-#~ "openidauth in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Permitir autenticação OpenID enviando ChilliSpot-Config=allow-openidauth "
-#~ "na Resquisição de Acesso do Radius"
-
-#~ msgid "RADIUS accounting port"
-#~ msgstr "Porta de contabilidade do RADIUS"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius accounting requests (default 1813)"
-#~ msgstr ""
-#~ "O número da porta UDP para ser usada pela requisição de contabilização do "
-#~ "radius (padrão 1813)"
-
-#~ msgid "RADIUS authentication port"
-#~ msgstr "Porta de autenticação do RADIUS"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius authentication requests (default "
-#~ "1812)"
-#~ msgstr ""
-#~ "O número da porta UDP para ser usada pela requisição de autenticação do "
-#~ "radius (padrão 1812)"
-
-#~ msgid "Option radiuscalled"
-#~ msgstr "Opção radiuscalled"
-
-#~ msgid "RADIUS listen address"
-#~ msgstr "Endereço de escuta do RADIUS"
-
-#~ msgid "Local interface IP address to use for the radius interface"
-#~ msgstr "Endereço IP da interface local para a interface radius"
-
-#~ msgid "RADIUS location ID"
-#~ msgstr "ID da localização do RADIUS"
-
-#~ msgid "WISPr Location ID"
-#~ msgstr "ID da Localização WISPr"
-
-#~ msgid "RADIUS location name"
-#~ msgstr "Nome da localização do RADIUS"
-
-#~ msgid "WISPr Location Name"
-#~ msgstr "Nome da localização WISPr"
-
-#~ msgid "NAS ID"
-#~ msgstr "ID do NAS"
-
-#~ msgid "Network access server identifier"
-#~ msgstr "Identificador do servidor de acesso à rede"
-
-#~ msgid "Option radiusnasip"
-#~ msgstr "Opção radiusnasip"
-
-#~ msgid "NAS port type"
-#~ msgstr "Tipo de porta NAS"
-
-#~ msgid ""
-#~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
-#~ msgstr ""
-#~ "Valor do atributo do NAS-Port-Type. O padrão é 19 (IEEE-802.11-Sem fio)"
-
-#~ msgid "Send RADIUS VSA"
-#~ msgstr "Enviar VSA do RADIUS"
-
-#~ msgid "Send the ChilliSpot-OriginalURL RADIUS VSA in Access-Request"
-#~ msgstr ""
-#~ "Enviar o ChilliSpot-OriginalURL do VSA do RADIUS na Requisição de Acesso"
-
-#~ msgid "RADIUS secret"
-#~ msgstr "Segredo do RADIUS"
-
-#~ msgid "Radius shared secret for both servers"
-#~ msgstr "Segredo compartilhado entre ambos os servidores Radius"
-
-#~ msgid "RADIUS server 1"
-#~ msgstr "Servidor 1 do RADIUS"
-
-#~ msgid "The IP address of radius server 1"
-#~ msgstr "Endereço IP do servidor 1 do radius"
-
-#~ msgid "RADIUS server 2"
-#~ msgstr "Servidor 2 do RADIUS"
-
-#~ msgid "The IP address of radius server 2"
-#~ msgstr "Endereço IP do servidor 2 do radius"
-
-#~ msgid "Swap octets"
-#~ msgstr "Troque octetos"
-
-#~ msgid ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
-#~ "to RADIUS attribtues"
-#~ msgstr ""
-#~ "Troca o significado de \"octetos de entrada\" e \"octetos de saída\" como "
-#~ "está relatado nos atributos RADIUS"
-
-#~ msgid "Allow WPA guests"
-#~ msgstr "Permite convidados WPA"
-
-#~ msgid ""
-#~ "Allows WPA Guest authentication by sending ChilliSpot-Config=allow-wpa-"
-#~ "guests in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Permite a autenticação de convidados WPA enviando ChilliSpot-Config=allow-"
-#~ "wpa-guests na Requisição de Acesso do RADIUS"
-
-#~ msgid "Proxy client"
-#~ msgstr "Cliente proxy"
-
-#~ msgid ""
-#~ "IP address from which radius requests are accepted. If omitted the server "
-#~ "will not accept radius requests"
-#~ msgstr ""
-#~ "Endereço IP do qual as requisições radius serão aceitas. Se omitido, o "
-#~ "servidor não vai aceitar requisições radius"
-
-#~ msgid "Proxy listen address"
-#~ msgstr "Endereço de escuta do proxy"
-
-#~ msgid "Local interface IP address to use for accepting radius requests"
-#~ msgstr ""
-#~ "Endereço IP da interface local usado para aceitar as requisições radius"
-
-#~ msgid "Proxy port"
-#~ msgstr "Porta do Proxy"
-
-#~ msgid "UDP Port to listen to for accepting radius requests"
-#~ msgstr "Porta UDP para aceitar requisições radius"
-
-#~ msgid "Proxy secret"
-#~ msgstr "Segredo do Proxy"
-
-#~ msgid "Radius shared secret for clients"
-#~ msgstr "Segredo compartilhado do Radius para clientes"
-
-#~ msgid "UAM configuration"
-#~ msgstr "Configuração UAM"
-
-#~ msgid "Unified Configuration Method settings"
-#~ msgstr "Configurações do Método de Configuração Unificado"
-
-#~ msgid "Use Chilli XML"
-#~ msgstr "Use XML do Chilli"
-
-#~ msgid "Return the so-called Chilli XML along with WISPr XML"
-#~ msgstr "Retorna o famoso XML do Chili juntamente com o XML do WISPr"
-
-#~ msgid "Default idle timeout"
-#~ msgstr "Estouro de tempo de ociosidade padrão"
-
-#~ msgid "Default idle timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Estouro de tempo de ociosidade padrão, a não ser que seja definido pelo "
-#~ "RADIUS (padrão é 0)"
-
-#~ msgid "Default interim interval"
-#~ msgstr "Intervalo padrão como interino"
-
-#~ msgid ""
-#~ "Default interim-interval for RADIUS accounting unless otherwise set by "
-#~ "RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Intervalo padrão como interino para a contabilidade do RADIUS, a não ser "
-#~ "que seja definido pelo RADIUS (padrão é 0)"
-
-#~ msgid "Default session timeout"
-#~ msgstr "Estouro de tempo padrão da sessão"
-
-#~ msgid ""
-#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Estouro de tempo padrão da sessão, a não ser que seja definido pelo "
-#~ "RADIUS (padrão é 0)"
-
-#~ msgid "Inspect DNS traffic"
-#~ msgstr "Inspeciona tráfego DNS"
-
-#~ msgid ""
-#~ "Inspect DNS packets and drop responses with any non- A, CNAME, SOA, or MX "
-#~ "records to prevent dns tunnels (experimental)"
-#~ msgstr ""
-#~ "Inspeciona os pacotes DNS e descarta respostas para qualquer registro que "
-#~ "não seja A, CNAME, SOA ou MX. Isto evita túneis pelo DNS (experimental)"
-
-#~ msgid "Local users file"
-#~ msgstr "Arquivo de usuários locais"
-
-#~ msgid ""
-#~ "A colon seperated file containing usernames and passwords of locally "
-#~ "authenticated users"
-#~ msgstr ""
-#~ "Um arquivo separado por dois pontos (:) contendo o nome de usuário e "
-#~ "senhas para usuários autenticados localmente"
-
-#~ msgid "Location name"
-#~ msgstr "Nome da localização"
-
-#~ msgid "Human readable location name used in JSON interface"
-#~ msgstr "Nome da localização legível usado na interface JSON"
-
-#~ msgid "Do not redirect to UAM server"
-#~ msgstr "Não redirecionar para servidor UAM"
-
-#~ msgid ""
-#~ "Do not return to UAM server on login success, just redirect to original "
-#~ "URL"
-#~ msgstr ""
-#~ "Não redirecione para o servidor UAM quando o login for bem sucedido. "
-#~ "Somente redirecione para a URL original"
-
-#~ msgid "Do not do WISPr"
-#~ msgstr "Não faça WISPr"
-
-#~ msgid "Do not do any WISPr XML, assume the back-end is doing this instead"
-#~ msgstr ""
-#~ "Não faça qualquer XML do WISPr. Ao invés disto, assuma que o servidor "
-#~ "está fazendo isto"
-
-#~ msgid "Post auth proxy"
-#~ msgstr "Proxy após a autenticação"
-
-#~ msgid ""
-#~ "Used with postauthproxyport to define a post authentication HTTP proxy "
-#~ "server"
-#~ msgstr ""
-#~ "Usado em conjunto com postauthproxyport para definir um servidor PROXY "
-#~ "HTTP após a autenticação"
-
-#~ msgid "Post auth proxy port"
-#~ msgstr "Porta do proxy após a autenticação"
-
-#~ msgid ""
-#~ "Used with postauthproxy to define a post authentication HTTP proxy server"
-#~ msgstr ""
-#~ "Usado em conjunto com postauthproxyport para definir um servidor PROXY "
-#~ "HTTP após a autenticação"
-
-#~ msgid "Allowed resources"
-#~ msgstr "Recursos permitidos"
-
-#~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr ""
-#~ "Lista de recursos que o cliente pode acessar sem antes se autenticar"
-
-#~ msgid "Allow any DNS server"
-#~ msgstr "Permitir qualquer Servidor DNS"
-
-#~ msgid "Allow any DNS server for unauthenticated clients"
-#~ msgstr "Permitir qualquer servidor DNS para clientes não autenticados"
-
-#~ msgid "Allow any IP address"
-#~ msgstr "Permitir qualquer endereço IP"
-
-#~ msgid ""
-#~ "Allow clients to use any IP settings they wish by spoofing ARP "
-#~ "(experimental)"
-#~ msgstr ""
-#~ "Permitir que clientes usem qualquer configuração de IP desejada usando a "
-#~ "técnica de falsificação de APR (experimental)"
-
-#~ msgid "Allowed domains"
-#~ msgstr "Domínios permitidos"
-
-#~ msgid ""
-#~ "Defines a list of domain names to automatically add to the walled garden"
-#~ msgstr ""
-#~ "Define uma lista de domínios automaticamente adicionados para acesso da "
-#~ "zona controlada"
-
-#~ msgid "UAM homepage"
-#~ msgstr "Página do UAM"
-
-#~ msgid "URL of homepage to redirect unauthenticated users to"
-#~ msgstr "URL da página para onde redirecionar os usuários não autenticados"
-
-#~ msgid "UAM static content port"
-#~ msgstr "Porta de conteúdo estático do UAM"
-
-#~ msgid "TCP port to bind to for only serving embedded content"
-#~ msgstr "Porta TCP para somente servidor conteúdo embutido"
-
-#~ msgid "UAM listening address"
-#~ msgstr "Endereço de escuta do UAM"
-
-#~ msgid "IP address to listen to for authentication of clients"
-#~ msgstr "Endereço IP para escutar pela autenticação dos clientes"
-
-#~ msgid "UAM logout IP"
-#~ msgstr "IP de desautenticação do UAM"
-
-#~ msgid ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults "
-#~ "to 1.1.1.1)"
-#~ msgstr ""
-#~ "Use este endereço IP para instantaneamente desautenticar um cliente que a "
-#~ "acessar (padrão é 1.1.1.1)"
-
-#~ msgid "UAM listening port"
-#~ msgstr "Porta de escuta do UAM"
-
-#~ msgid "TCP port to bind to for authenticating clients (default 3990)"
-#~ msgstr "Porta de escuta do UAM para autenticar clientes (padrão é 3990)"
-
-#~ msgid "UAM secret"
-#~ msgstr "Segredo do UAM"
-
-#~ msgid "Shared secret between uamserver and chilli"
-#~ msgstr "Segredo compatilhado entre o servidor UAM e o chilli"
-
-#~ msgid "UAM server"
-#~ msgstr "Servidor UAM"
-
-#~ msgid "URL of web server to use for authenticating clients"
-#~ msgstr "URL do servidor web usado para autenticar os clientes"
-
-#~ msgid "UAM user interface"
-#~ msgstr "Interface do usuário do UAM"
-
-#~ msgid ""
-#~ "An init.d style program to handle local content on the uamuiport web "
-#~ "server"
-#~ msgstr ""
-#~ "Um programa estilo init.d para tratar o conteúdo local no servidor web "
-#~ "uamuiport"
-
-#~ msgid "Use status file"
-#~ msgstr "Usar o arquivo de estado"
-
-#~ msgid ""
-#~ "Write the status of clients in a non-volatile state file (experimental)"
-#~ msgstr ""
-#~ "Escreva o estado dos clientes em um arquivo de estado não volátil "
-#~ "(experimental)"
-
-#~ msgid "WISPr login url"
-#~ msgstr "URL de login do WISPr"
-
-#~ msgid "Specific URL to be given in WISPr XML LoginURL"
-#~ msgstr "Especifica a URL para ser dada no LoginURL do XML do WISPr"
-
-#~ msgid "CGI program"
-#~ msgstr "Programa CGI"
-
-#~ msgid ""
-#~ "Executable to run as a CGI type program (like haserl) for URLs with "
-#~ "extention .chi"
-#~ msgstr ""
-#~ "Executável para rodar como um programa do tipo CGI (como o haserl) para "
-#~ "URLs com a extensão .chi"
-
-#~ msgid "Web content directory"
-#~ msgstr "Diretório de conteúdo Web"
-
-#~ msgid "Directory where embedded local web content is placed"
-#~ msgstr "Diretório onde o conteúdo web local embutido fica localizado"
-
-#~ msgid "MAC configuration"
-#~ msgstr "Configuração do MAC"
-
-#~ msgid "Configure MAC authentication"
-#~ msgstr "Configurar a autenticação MAC"
-
-#~ msgid "Allowed MAC addresses"
-#~ msgstr "Endereços MAC permitidos"
-
-#~ msgid "List of MAC addresses for which MAC authentication will be performed"
-#~ msgstr ""
-#~ "Lista dos endereços MAC permitidos para os quais a autenticação MAC será "
-#~ "realizada"
-
-#~ msgid "Authenticate locally allowed MACs"
-#~ msgstr "Autenticar MACs autorizados localmente"
-
-#~ msgid "Authenticate allowed MAC addresses without the use of RADIUS"
-#~ msgstr "Autenticar os endereços MAC autorizados sem usar o RADIUS"
-
-#~ msgid "Enable MAC authentification"
-#~ msgstr "Habilita a autenticação MAC"
-
-#~ msgid "Try to authenticate all users based on their mac address alone"
-#~ msgstr ""
-#~ "Tente autenticar todos os usuários baseados somente no seu endereço MAC"
-
-#~ msgid "Password"
-#~ msgstr "Senha"
-
-#~ msgid "Password used when performing MAC authentication"
-#~ msgstr "Senha usada para realizar a autenticação MAC"
-
-#~ msgid "Suffix"
-#~ msgstr "Sufixo"
-
-#~ msgid ""
-#~ "Suffix to add to the MAC address in order to form the User-Name, which is "
-#~ "sent to the radius server"
-#~ msgstr ""
-#~ "Sufixo para adicionar ao endereço MAC que forma o nome do usuário, o qual "
-#~ "é enviado ao servidor radius"
diff --git a/po/pt_BR/ddns.po b/po/pt_BR/ddns.po
deleted file mode 100644
index 1921b93..0000000
--- a/po/pt_BR/ddns.po
+++ /dev/null
@@ -1,90 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-11-03 07:02+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "Verifique por alterações no endereço IP a cada"
-
-msgid "Check-time unit"
-msgstr "Unidade de tempo para verificação"
-
-msgid "Custom update-URL"
-msgstr "URL para atualização personalizada"
-
-msgid "Dynamic DNS"
-msgstr "DNS Dinâmico"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"O DNS dinâmico permite que o seu roteador possa ser encontrado a partir de "
-"um nome fixo, mesmo usando um Endereço IP dinâmico."
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid "Event interface"
-msgstr "Interface de eventos"
-
-msgid "Force update every"
-msgstr "Forçar atualização a cada"
-
-msgid "Force-time unit"
-msgstr "Unidade de tempo para atualização forçada"
-
-msgid "Hostname"
-msgstr "Nome do computador"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-"Na subida de qual interface que o processo do script ddns deve ser iniciado"
-
-msgid "Password"
-msgstr "Senha"
-
-msgid "Service"
-msgstr "Serviço"
-
-msgid "Source of IP address"
-msgstr "Origem do Endereço IP"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Usuário"
-
-msgid "custom"
-msgstr "personalizado"
-
-# Hours
-msgid "h"
-msgstr "h"
-
-msgid "interface"
-msgstr "interface"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "min"
-
-msgid "network"
-msgstr "rede"
diff --git a/po/pt_BR/diag_core.po b/po/pt_BR/diag_core.po
deleted file mode 100644
index e27315b..0000000
--- a/po/pt_BR/diag_core.po
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-08 03:14+0200\n"
-"Last-Translator: luizluca <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configure Diagnostics"
-msgstr "Configura os Diagnósticos"
-
-msgid "Diagnostics"
-msgstr "Diagnósticos"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Os diagnósticos disponíveis neste menu dependem de quais módulos você tem "
-"instalado no seu dispositivo."
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"As entradas no menu permitem que você realize diagnósticos em seu sistema "
-"para ajudar na resolução de problemas."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Com este menu, você pode configurar o diagnóstico de rede como varredura de "
-"dispositivos e testes de ping."
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d_diag"
diff --git a/po/pt_BR/diag_devinfo.po b/po/pt_BR/diag_devinfo.po
deleted file mode 100644
index 53face0..0000000
--- a/po/pt_BR/diag_devinfo.po
+++ /dev/null
@@ -1,220 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-17 23:51+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Actions"
-msgstr "Ações"
-
-msgid "Add"
-msgstr "Adicionar"
-
-msgid "Beginning of MAC address range"
-msgstr "Começo da faixa de endereços MAC"
-
-msgid "Config Phone Scan"
-msgstr "Configurar a Busca por Telefone"
-
-msgid "Configure"
-msgstr "Configurar"
-
-msgid "Configure Scans"
-msgstr "Configurar Scans"
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-"Configura busca por dispositivos em redes específicas. Ao se reduzir "
-"'Timeout', 'Repeat Count' e/ou 'Sleep Between Requests' pode-se agilizar "
-"buscas, mas também pode não encontrar alguns dispositivos."
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-"Configura busca por dispositivos com suporte a SIP em redes específicas. Ao "
-"se reduzir 'Timeout', 'Repeat Count' e/ou 'Sleep Between Requests' pode-se "
-"agilizar buscas, mas também pode não encontrar alguns dispositivos."
-
-msgid "Delete"
-msgstr "Apagar"
-
-msgid "Device Scan Config"
-msgstr "Configurar a Busca por Dispositivos"
-
-msgid "Device Type"
-msgstr "Tipo de dispositivo"
-
-msgid "Devices discovered for"
-msgstr "Dispositivos descobertos para"
-
-msgid "Devices on Network"
-msgstr "Dispositivos na Rede"
-
-msgid "Edit"
-msgstr "Editar"
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid "End of MAC address range"
-msgstr "Final da faixa de endereços MAC"
-
-msgid "Go to relevant configuration page"
-msgstr "Vá para página de configuração relevante"
-
-msgid "IP Address"
-msgstr "Endereço IP"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Invalid"
-msgstr "Inválido"
-
-# Link like <a> or network link?
-msgid "Link to Device"
-msgstr "Ligar ao Dispositivo"
-
-msgid "MAC Address"
-msgstr "Endereço MAC"
-
-msgid "MAC Device Info Overrides"
-msgstr "Sobrescrição da informação do dispositivo MAC"
-
-msgid "MAC Device Override"
-msgstr "Sobrescreve o Dispositivo MAC"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"Faixa MAC e informação usada para sobrescrever os bancos de dados do sistema "
-"e IEEE"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Milissegundos para esperar entre requisições (padrão 100)"
-
-msgid "Model"
-msgstr "Modelo"
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Network Device Scan"
-msgstr "Busca por dispositivo de rede"
-
-msgid "Network Device Scanning Configuration"
-msgstr "Configuração de busca por dispositivo de rede"
-
-msgid "Networks to scan for devices"
-msgstr "Redes a serem pesquisadas por dispositivos"
-
-msgid "Networks to scan for supported devices"
-msgstr "Redes a serem pesquisadas por dispositivos suportados"
-
-msgid "No SIP devices"
-msgstr "Nenhum dispositivo SIP"
-
-msgid "No devices detected"
-msgstr "Nenhum dispositivo detectado"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Número de vezes para enviar requisições (padrão 1 )"
-
-msgid "OUI Owner"
-msgstr "Dono da OUI"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Sobrescrever a informação retornada pelo MAC para o Script de Informação do "
-"Dispositivo (mac-to_devinfo) para uma faixa especificada de Endereços MAC"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr "Realiza buscas (pode levar alguns minutos)"
-
-msgid "Phone Information"
-msgstr "Informação do Telefone"
-
-msgid "Phone Scan"
-msgstr "Busca por Telefone"
-
-msgid "Phone Scanning Configuration"
-msgstr "Configuração da Busca por Telefone"
-
-msgid "Phones"
-msgstr "Telefones"
-
-msgid "Ports"
-msgstr "Portas"
-
-msgid "Raw"
-msgstr "Bruto"
-
-msgid "Repeat Count"
-msgstr "Quantidade de Repetições"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr "Buscas Repetidas (pode levar alguns minutos)"
-
-msgid "SIP Device Information"
-msgstr "Informação de Dispositivo SIP"
-
-msgid "SIP Device Scan"
-msgstr "Busca por Dispositivos SIP"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Configuração da Busca por Dispositivos SIP"
-
-msgid "SIP Devices on Network"
-msgstr "Dispositivos SIP na Rede"
-
-msgid "SIP devices discovered for"
-msgstr "Dispositivos SIP descobertos para"
-
-msgid "Scan for devices on specified networks."
-msgstr "Busca por dispositivos nas redes especificadas."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr "Busca por dispositivos com suporte a SIP em redes especificadas."
-
-msgid "Scanning Configuration"
-msgstr "Configuração de busca"
-
-msgid "Scans for devices on specified networks."
-msgstr "Busca por dispositivos nas redes especificadas."
-
-msgid "Sleep Between Requests"
-msgstr "Espera Entre Requisições"
-
-msgid "Subnet"
-msgstr "Subrede"
-
-msgid "This section contains no values yet"
-msgstr "Esta seção contém nenhum valor ainda"
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Tempo para esperar por respostas em segundos (padrão 10)"
-
-msgid "Timeout"
-msgstr "Estouro de tempo"
-
-msgid "Use Configuration"
-msgstr "Usar configuração"
-
-msgid "Vendor"
-msgstr "Fabricante"
-
-msgid "check other networks"
-msgstr "verifique outras redes"
diff --git a/po/pt_BR/ffwizard.po b/po/pt_BR/ffwizard.po
deleted file mode 100644
index 5bc0c11..0000000
--- a/po/pt_BR/ffwizard.po
+++ /dev/null
@@ -1,178 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-27 00:35+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Permitir a transferência de estatísticas anônimas sobre este nó"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Marque isto para proteger sua rede local (LAN) de outros nós ou clientes"
-
-msgid "Configure network"
-msgstr "Configurar a rede"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr "Conecte seu nó com outros nós por um túnel pela internet."
-
-msgid "DHCP IP range"
-msgstr "Faixa de IP do DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "O DHCP irá atribuir automaticamente endereços IP para os clientes"
-
-msgid "DNS Server"
-msgstr "Servidor DNS"
-
-msgid "Enable DHCP"
-msgstr "Habilitar DHCP"
-
-msgid "Gateway"
-msgstr "Roteador"
-
-msgid "Heartbeat"
-msgstr "Pulsação de Monitoramento (Heartbeat)"
-
-msgid "IP address"
-msgstr "Endereço IP"
-
-msgid "L2gvpn tunnel"
-msgstr "Tunel l2gvpn"
-
-msgid "Limit download bandwidth"
-msgstr "Limitar a velocidade para baixar"
-
-msgid "Limit upload bandwidth"
-msgstr "Limitar a velocidade para subir"
-
-msgid "Mesh IP address"
-msgstr "Endereço IP da rede em malha"
-
-msgid "Mesh IPv6 Address"
-msgstr "Endereço IPv6 da rede em malha"
-
-msgid "Netmask"
-msgstr "Máscara de Rede"
-
-msgid "Password"
-msgstr "Senha"
-
-msgid "Password confirmation"
-msgstr "Confirmação da Senha"
-
-msgid "Password successfully changed"
-msgstr "A senha foi alterada com sucesso"
-
-msgid "Protect LAN"
-msgstr "Proteger rede local (LAN)"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Selecione esta opção para configurar suas interfaces de rede."
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Selecione isto para permitir que outros usem sua conexão para acessar a "
-"internet."
-
-msgid "Share your internet connection"
-msgstr "Compartilhar sua conexão com a internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Faixa de endereços IP atribuídos aos clientes (ex: 10.1.2.1/28). Se esta "
-"faixa está dentro da faixa da rede em malha, então ela será anunciada como "
-"<abbr title=\"Host and network association, Associação de equipamentos e "
-"redes\">HNA</abbr>. Qualquer outra faixa irá utilizar NAT. Se deixada vazia, "
-"os padrões do perfil da comunidade será usada."
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr "O endereço IPv6 é calculado automaticamente."
-
-msgid "The protocol to use for internet connectivity."
-msgstr "O protocolo usado para a conectividade com a internet."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Este é um endereço único na rede em malha (ex: 10.1.1.1) e tem que ser "
-"registrado na sua comunidade local."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Isto configurará uma nova interface de rede sem fio virtual em modo de ponto "
-"de acesso."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Este assistente irá ajudá-lo na configuração do seu roteador para Freifunk "
-"outra rede comunitária sem fio similar."
-
-msgid "Unknown Error"
-msgstr "Erro Desconhecido"
-
-msgid "Username"
-msgstr "Usuário"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Ponto de Acesso Virtual (VAP)"
-
-msgid "Wizard"
-msgstr "Assistente"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Seu dispositivo e os nós vizinhos devem utilizar o mesmo canal."
-
-msgid "dhcp"
-msgstr "dhcp"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "static"
-msgstr "estático"
-
-msgid "Configure this interface."
-msgstr "Configurar esta interface."
-
-msgid "recommended"
-msgstr "recomendado"
-
-msgid "Basic settings"
-msgstr "Configuração básica"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "As configurações básicas estão incompletas. Por favor vá para"
-
-msgid "Error"
-msgstr "Erro"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-"Você não pode usar o assistente porque algum dos valores necessários estão "
-"ausentes."
-
-msgid "and fill out all required fields."
-msgstr "e preencha todos os campos necessários."
diff --git a/po/pt_BR/firewall.po b/po/pt_BR/firewall.po
deleted file mode 100644
index 94af82e..0000000
--- a/po/pt_BR/firewall.po
+++ /dev/null
@@ -1,735 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-09-26 23:07+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr "%s in %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s com %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s em %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(Entrada Sem Nome)"
-
-msgid "(Unnamed Rule)"
-msgstr "(Regra Sem Nome)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(SNAT Sem Nome)"
-
-msgid "-- Please choose --"
-msgstr "-- Por favor, escolha --"
-
-msgid "-- custom --"
-msgstr "-- personalizado --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> pcts. por <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr "<var>%d</var> pcts. por <var>%s</var>, pico <var>%d</var> pcts."
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> e limite a %s"
-
-msgid "Action"
-msgstr "Ação"
-
-msgid "Add"
-msgstr "Adicionar"
-
-msgid "Add and edit..."
-msgstr "Adicionar e editar..."
-
-msgid "Advanced Settings"
-msgstr "Configurações Avançadas"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Permite o encaminhamento da <em>zona de origem</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Permite o encaminhamento para a <em>zona de destino</em>:"
-
-msgid "Any"
-msgstr "Qualquer"
-
-msgid "Covered networks"
-msgstr "Redes cobertas"
-
-msgid "Custom Rules"
-msgstr "Regras Personalizadas"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"As regras personalizadas permitem executar comandos iptables arbitrários não "
-"cobertos por esta ferramenta. Os comandos serão executados após cada "
-"reinício do firewall, logo após a carga do conjunto de regras padrão."
-
-msgid "Destination IP address"
-msgstr "Endereço IP de destino"
-
-msgid "Destination address"
-msgstr "Endereço de destino"
-
-msgid "Destination port"
-msgstr "Porta de destino"
-
-msgid "Destination zone"
-msgstr "Zona de destino"
-
-msgid "Do not rewrite"
-msgstr "Não sobrescreva"
-
-msgid "Drop invalid packets"
-msgstr "Descartar pacotes inválidos"
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid "Enable NAT Loopback"
-msgstr "Habilite o Loopback do NAT"
-
-msgid "Enable SYN-flood protection"
-msgstr "Habilite proteção contra SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr "Habilite o registro nesta zona"
-
-msgid "External IP address"
-msgstr "Endereço IP externo"
-
-msgid "External port"
-msgstr "Porta Externa"
-
-msgid "External zone"
-msgstr "Zona externa"
-
-msgid "Extra arguments"
-msgstr "Argumentos extras"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall - Custom Rules"
-msgstr "Firewall - Regras personalizadas"
-
-msgid "Firewall - Port Forwards"
-msgstr "Firewall - Encaminhamento de Portas"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Firewall - Regras de Tráfego"
-
-msgid "Firewall - Zone Settings"
-msgstr "Firewall - Configurações de Zona"
-
-msgid "Force connection tracking"
-msgstr "Force o rastreamento da conexão"
-
-msgid "Forward"
-msgstr "Encaminhar"
-
-msgid "Forward to"
-msgstr "Encaminhar para"
-
-msgid "From %s in %s"
-msgstr "Vindo de %s em %s"
-
-msgid "From %s in %s with source %s"
-msgstr "Vindo de %s em %s com origem %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "Vindo de %s em %s com origem %s e %s"
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 e IPv6"
-
-msgid "IPv4 only"
-msgstr "Somente IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "Somente IPv6"
-
-msgid "Input"
-msgstr "Entrada"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Encaminhamento entre Zonas"
-
-msgid "Internal IP address"
-msgstr "Endereço IP interno"
-
-msgid "Internal port"
-msgstr "Porta Interna"
-
-msgid "Internal zone"
-msgstr "Zona interna"
-
-msgid "Limit log messages"
-msgstr "Limita as mensagens de registro"
-
-msgid "MSS clamping"
-msgstr "Ajuste do MSS"
-
-msgid "Masquerading"
-msgstr "Mascaramento"
-
-msgid "Match"
-msgstr "casol"
-
-msgid "Match ICMP type"
-msgstr "Casa com ICMP tipo"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-"Casa o tráfego encaminhado para uma porta ou faixa de portas de destino "
-"específica."
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Casa o tráfego entrante direcionado para uma porta ou faixa de portas de "
-"destino específica neste computador"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Casa o tráfego entrante originado de uma porta ou faixa de portas no "
-"equipamento cliente."
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "New SNAT rule"
-msgstr "Nova regra de SNAT"
-
-msgid "New forward rule"
-msgstr "Nova regra de encaminhamento"
-
-msgid "New input rule"
-msgstr "Nova regra de entrada"
-
-msgid "New port forward"
-msgstr "Novo encaminhamento de porta"
-
-msgid "New source NAT"
-msgstr "Nova origem NAT"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-"Somente case o tráfego entrante direcionado para o endereço IP fornecido."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Somente case o tráfego entrante destes endereços MAC."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr "Somente case o tráfego entrante desta faixa de endereços IP."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Somente case o tráfego entrante vindo da porta de origem fornecida ou "
-"intervalo de portas no equipamento cliente"
-
-msgid "Open ports on router"
-msgstr "Abrir portas no roteador"
-
-msgid "Other..."
-msgstr "Outro..."
-
-msgid "Output"
-msgstr "Saída"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr "Passa argumentos adicionais para o iptables. Use com cuidado!"
-
-msgid "Port Forwards"
-msgstr "Encaminhamentos de Porta"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"O encaminhamento de portas permite que computadores remotos na Internet "
-"conectem a um computador ou serviço específico dentro da rede local privada."
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Redireciona tráfego entrante para a porta especificada no computador interno"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Redireciona tráfego entrante para o computador interno especificado"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Restringe o mascaramento para uma subrede de destino específica"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Restringe o mascaramento para uma subrede de origem específica"
-
-msgid "Restrict to address family"
-msgstr "Restringe para uma família de endereços"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "Reescreva o tráfego correspondente para o endereço fornecido."
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Reescreva o tráfego correspondente para a porta de origem fornecida. Pode "
-"ficar em branco para somente reescrever o endereço IP."
-
-msgid "Rewrite to source %s"
-msgstr "Reescrever para a origem %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "Reescrever para a origem %s, %s"
-
-msgid "SNAT IP address"
-msgstr "Endereço IP da SNAT"
-
-msgid "SNAT port"
-msgstr "Porta da SNAT"
-
-msgid "Source IP address"
-msgstr "Endereço IP de origem"
-
-msgid "Source MAC address"
-msgstr "Endereço MAC de origem"
-
-msgid "Source NAT"
-msgstr "NAT origem"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"NAT origem é uma forma específica de mascaramento que permite o controle "
-"fino do endereço IP de origem usado no tráfego sainte. Por exemplo, para "
-"mapear múltiplos endereços WAN para subredes internas."
-
-msgid "Source address"
-msgstr "Endereço de origem"
-
-msgid "Source port"
-msgstr "Porta de origem"
-
-msgid "Source zone"
-msgstr "Zona de origem"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"O firewall cria zonas sobre as interfaces de rede para controlar o fluxo do "
-"tráfego de rede."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"As opções abaixo controlam as políticas de encaminhamento entre esta zona (%"
-"s) e outras zonas. <em>Zonas de destino</em> incluem tráfego encaminhado "
-"<strong>originado de %q</strong>. <em>Zonas de origem</em> casam com tráfego "
-"encaminhado de outras zonas <strong>apontando para %q</strong>. A regra de "
-"encaminhamento é <em>unidirecional</em>, ex: um encaminhamento da LAN para "
-"WAN <em>não</em> implica na permissão de encaminhar da WAN para LAN."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"Esta página permite que você mude propriedades avançadas da entrada do "
-"encaminhamento de porta. Na maioria dos casos, não é necessário modificar "
-"estas configurações."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"Esta página permite que você mude propriedades avançadas da entrada da regra "
-"de tráfego, como os equipamentos de origem e destino."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Esta seção define as propriedades comuns de %q. As opções de <em>entrada</"
-"em> e <em>saída</em> definem as políticas padrão para o tráfego entrando e "
-"saindo desta zona, enquanto a opção de <em>encaminhamento</em> descreve a "
-"política para encaminhar o tráfego entre diferentes redes dentro da zona. "
-"<em>Redes Cobertas</em> especificam que redes disponíveis são membros desta "
-"zona."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "Para %s em %s <var>neste dispositivo</var>"
-
-msgid "To %s in %s"
-msgstr "Para %s em %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "Para %s <var>neste dispositivo</var>"
-
-msgid "To %s, %s in %s"
-msgstr "Para %s, %s em %s"
-
-msgid "To source IP"
-msgstr "Para o endereço IP de origem"
-
-msgid "To source port"
-msgstr "Para a porta de origem"
-
-msgid "Traffic Rules"
-msgstr "Regras de tráfego"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"Regras de tráfego definem políticas para a passagem de pacotes entre as "
-"diferentes zonas. Por exemplo, rejeitar o tráfego entre certos equipamentos "
-"ou abrir portas WAN no roteador."
-
-msgid "Via %s"
-msgstr "Via %s"
-
-msgid "Via %s at %s"
-msgstr "Via %s at %s"
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Você pode especificar múltiplas entradas selecionando \"-- personalizado --"
-"\" e então entrando os protocolos separados por espaço."
-
-msgid "Zone %q"
-msgstr "Zona %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Zona ⇒ Encaminhamentos"
-
-msgid "Zones"
-msgstr "Zonas"
-
-msgid "accept"
-msgstr "aceitar"
-
-msgid "any"
-msgstr "qualquer"
-
-msgid "any host"
-msgstr "qualquer equipamento"
-
-msgid "any router IP"
-msgstr "qualquer endereço IP do roteador"
-
-msgid "any zone"
-msgstr "qualquer zona"
-
-msgid "don't track"
-msgstr "não rastrear"
-
-msgid "drop"
-msgstr "descartar"
-
-msgid "reject"
-msgstr "rejeitar"
-
-#~ msgid "Destination"
-#~ msgstr "Destino"
-
-#~ msgid "Family"
-#~ msgstr "Família"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "Encaminhar para %s em %s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "Encaminhar para %s, %s em %s"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Origem"
-
-#~ msgid "To %s"
-#~ msgstr "Para %s"
-
-#~ msgid "To %s at %s"
-#~ msgstr "Para %s em %s"
-
-#~ msgid "Via"
-#~ msgstr "Via"
-
-#~ msgid "Accept forward"
-#~ msgstr "Aceitar encaminhamento"
-
-#~ msgid "Accept input"
-#~ msgstr "Aceitar entrada"
-
-#~ msgid "Disable"
-#~ msgstr "Desabilitado"
-
-#~ msgid "Discard forward"
-#~ msgstr "Descartar o encaminhamento"
-
-#~ msgid "Discard input"
-#~ msgstr "Descartar a entrada"
-
-#~ msgid "Do not track forward"
-#~ msgstr "Não rastreie o encaminhamento"
-
-#~ msgid "Do not track input"
-#~ msgstr "Não rastreie a entrada"
-
-#~ msgid "IP"
-#~ msgstr "Endereço IP"
-
-#~ msgid "IP range"
-#~ msgstr "Faixa de endereço IP"
-
-#~ msgid "IPs"
-#~ msgstr "Endereços IP"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MACs"
-#~ msgstr "MACs"
-
-#~ msgid "Refuse forward"
-#~ msgstr "Rejeitar encaminhamento"
-
-#~ msgid "Refuse input"
-#~ msgstr "Rejeitar entrada"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "A regra está desabilitada"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "A regra está habilitada"
-
-#~ msgid "day"
-#~ msgstr "dia"
-
-#~ msgid "hour"
-#~ msgstr "hora"
-
-#~ msgid "minute"
-#~ msgstr "minuto"
-
-#~ msgid "not"
-#~ msgstr "não"
-
-#~ msgid "port"
-#~ msgstr "porta"
-
-#~ msgid "ports"
-#~ msgstr "portas"
-
-#~ msgid "second"
-#~ msgstr "segundo"
-
-#~ msgid "type"
-#~ msgstr "tipo"
-
-#~ msgid "types"
-#~ msgstr "tipos"
-
-#~ msgid "(optional)"
-#~ msgstr "(opcional)"
-
-#~ msgid "Intended destination address"
-#~ msgstr "Endereço de destino planejado"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Porta interna (opcional)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Opções Avançadas"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Regras Avançadas"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "As regras avançadas permitem a personalização da firewall de acordo com "
-#~ "as necessidades. Apenas as novas conexões serão processadas. Pacotes que "
-#~ "pertençam a conexões já abertas estão automaticamente autorizados a "
-#~ "passar pelo firewall."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Regras Personalizadas (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Dispositivo"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "Para DNAT, casa com tráfego entrante direcionado para um dado endereço IP "
-#~ "de destino. Para SNAT, reescreve o endereço de origem para um dado "
-#~ "endereço."
-
-#~ msgid ""
-#~ "Match incoming traffic originating from the given source port or port "
-#~ "range on the client host"
-#~ msgstr ""
-#~ "Casa o tráfego entrante originado de uma porta ou faixa de portas de "
-#~ "origem específica no computador do cliente"
-
-#~ msgid "Overview"
-#~ msgstr "Visão geral"
-
-#~ msgid "Port forwarding"
-#~ msgstr "Redirecionamento de portas"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "O redirecionamento de portas permite disponibilizar serviços da rede "
-#~ "interna para uma rede externa."
-
-#~ msgid "Redirection type"
-#~ msgstr "Tipo de redirecionamento"
-
-#~ msgid "Redirections"
-#~ msgstr "Redirecionamentos"
-
-#~ msgid "Rules"
-#~ msgstr "Regras"
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Redirecionamento de Tráfego"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "Redirecionamento do tráfego permite a alteração do endereço de destino "
-#~ "dos pacotes encaminhados."
-
-#, fuzzy
-#~ msgid "Network"
-#~ msgstr "Redes"
-
-#~ msgid "Traffic Control"
-#~ msgstr "Controle de Tráfego"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Tráfego de Zona-para-Zona"
-
-#, fuzzy
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Aqui você pode especificar qual tráfego de rede será permitido para o "
-#~ "fluxo entre zonas das redes. Somente novas conexões serão processadas. "
-#~ "Pacotes pertencentes à conexões já abertas estão automaticamente "
-#~ "permitidos para passar pelo firewall."
-
-#~ msgid "Zone"
-#~ msgstr "Zona"
-
-#, fuzzy
-#~ msgid "Destination IP"
-#~ msgstr "Destino"
-
-#, fuzzy
-#~ msgid "IP address"
-#~ msgstr "Endereço IP"
-
-#, fuzzy
-#~ msgid "Source MAC-address"
-#~ msgstr "Endereço MAC de origem"
-
-#~ msgid "Custom forwarding"
-#~ msgstr "Redirecionamento personalizado"
-
-#~ msgid "Input Zone"
-#~ msgstr "Zona de Entrada"
-
-#~ msgid "Output Zone"
-#~ msgstr "Zona de Saída"
-
-#~ msgid "External Zone"
-#~ msgstr "Zona Externa"
-
-#~ msgid "Source MAC"
-#~ msgstr "MAC de origem"
-
-#~ msgid "Defaults"
-#~ msgstr "Padrões"
-
-#~ msgid ""
-#~ "These are the default settings that are used if no other rules match."
-#~ msgstr ""
-#~ "Estas são as configurações padrões, que serão usadas se não houver outras "
-#~ "regras."
-
-#~ msgid ""
-#~ "Zones part the network interfaces into certain isolated areas to separate "
-#~ "network traffic. One or more networks can belong to a zone. The MASQ-flag "
-#~ "enables NAT masquerading for all outgoing traffic on this zone."
-#~ msgstr ""
-#~ "Zonas são interfaces de redes usadas para separar o tráfego da rede. Uma "
-#~ "ou mais redes podem pertencer a uma zona. A flag-MASQ ativa o "
-#~ "mascaramento NAT para todo o tráfego de saída desta zona."
-
-#~ msgid "MASQ"
-#~ msgstr "MASQ"
-
-#~ msgid "contained networks"
-#~ msgstr "redes contidas"
diff --git a/po/pt_BR/freifunk-policyrouting.po b/po/pt_BR/freifunk-policyrouting.po
deleted file mode 100644
index 4aac8ca..0000000
--- a/po/pt_BR/freifunk-policyrouting.po
+++ /dev/null
@@ -1,68 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-10-12 09:13+0200\n"
-"PO-Revision-Date: 2012-09-27 00:40+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-"Todo o tráfego das interfaces pertencentes a estas zonas será enviado "
-"através de um roteador padrão na rede em malha."
-
-msgid "Enable Policy Routing"
-msgstr "Habilitar a Política de Roteamento"
-
-msgid "Fallback to mesh"
-msgstr "Se falhar, usar a malha"
-
-msgid "Firewall zones"
-msgstr "Zonas do firewall"
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-"Se nenhuma rota padrão for recebida da rede em malha, então o tráfego que "
-"pertencer a zona de firewall selecionada através da sua conexão internet "
-"como solução de contorno. Se você não quer isto e, ao contrário, deseja "
-"bloquear este tráfego, então você deve selecionar esta opção."
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-"Se o seu roteador não estiver disponível, usar como alternativa o roteador "
-"padrão da malha."
-
-msgid "Policy Routing"
-msgstr "Política de Roteamento"
-
-msgid "Strict Filtering"
-msgstr "Filtragem Estrita"
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
-"Estas páginas podem ser usadas para configurar a política de roteamento para "
-"certas zonas de firewall. Isto pode ser útil se você precisa usar sua "
-"própria conexão com a internet para si e não quer compartilhá-la com outros "
-"(é por isto que isto pode ser chamado de 'Modo Egocêntrico'). Seu próprio "
-"tráfego é enviado através de sua conexão com a internet enquanto o tráfego "
-"originado da rede em malha irá usar outro roteador na malha."
diff --git a/po/pt_BR/freifunk.po b/po/pt_BR/freifunk.po
deleted file mode 100644
index 00d43bc..0000000
--- a/po/pt_BR/freifunk.po
+++ /dev/null
@@ -1,439 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-27 00:40+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr "Configurações Básicas"
-
-msgid "Basic settings"
-msgstr "Configurações básicas"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "As configurações básicas estão incompletas. Por favor vá para"
-
-msgid "Basic system settings"
-msgstr "Configurações básicas do sistema"
-
-msgid "Bitrate"
-msgstr "Taxa de bit"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-"Verifique a existência de novas versões e realize a atualização "
-"automaticamente."
-
-msgid "Client network size"
-msgstr "Tamanho da rede dos clientes"
-
-msgid "Community"
-msgstr "Comunidade"
-
-msgid "Community profile"
-msgstr "Perfil da comunidade"
-
-msgid "Community settings"
-msgstr "Configurações da comunidade"
-
-msgid "Confirm Upgrade"
-msgstr "Confirmar a atualização"
-
-msgid "Contact"
-msgstr "Contato"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr "A informação de contato está incompleta. Por favor, vá para"
-
-msgid "Coordinates"
-msgstr "Coordenadas"
-
-msgid "Country code"
-msgstr "Código do país"
-
-msgid "Default routes"
-msgstr "Rotas padrão"
-
-msgid "Disable default content"
-msgstr "Desabilitar o conteúdo padrão"
-
-msgid "Diversity is enabled for device"
-msgstr "A diversidade está habilitada neste dispositivo"
-
-msgid "E-Mail"
-msgstr "E-mail"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr "Edita a página índice"
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr "Erro"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "Encontre sua coordenada com o OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "Freifunk"
-
-msgid "Freifunk Overview"
-msgstr "Visão Geral do Freifunk"
-
-msgid "Freifunk Remote Update"
-msgstr "Atualização Remota do Freifunk"
-
-msgid "Gateway"
-msgstr "Roteador"
-
-msgid "Go to"
-msgstr "Vá para"
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Olá e seja bem-vindo à rede do"
-
-msgid "Hide OpenStreetMap"
-msgstr "Esconder o OpenStreetMap"
-
-msgid "Homepage"
-msgstr "Página"
-
-msgid "Hostname"
-msgstr "Nome do equipamento"
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr "Se selecionado, o conteúdo padrão não é mostrado."
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Se estiver interessado no nosso projeto, entre em contacto com a comunidade "
-"local"
-
-msgid "Index Page"
-msgstr "Página Índice"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"O acesso à Internet depende de fatores técnicos e organizacionais, e pode "
-"funcionar ou não no seu caso."
-
-msgid "It is operated by"
-msgstr "É operado por"
-
-msgid "Keep configuration"
-msgstr "Manter a configuração"
-
-msgid "Latitude"
-msgstr "Latitude"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr "Carregar"
-
-msgid "Local Time"
-msgstr "Horário Local"
-
-msgid "Location"
-msgstr "Localização"
-
-msgid "Longitude"
-msgstr "Longitude"
-
-msgid "Map"
-msgstr "Mapa"
-
-msgid "Map Error"
-msgstr "Erro do Mapa"
-
-msgid "Memory"
-msgstr "Memória"
-
-msgid "Mesh prefix"
-msgstr "Prefixo da rede em malha"
-
-msgid "Metric"
-msgstr "Métrica"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "Network for client DHCP addresses"
-msgstr "Rede para os endereços dos clientes DHCP"
-
-msgid "Nickname"
-msgstr "Apelido"
-
-msgid "No default routes known."
-msgstr "Nenhuma rota padrão conhecida."
-
-msgid "Notice"
-msgstr "Aviso"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr "Operador"
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr "Visão Geral"
-
-msgid "Package libiwinfo required!"
-msgstr "O pacote libiwinfo é necessário!"
-
-msgid "Phone"
-msgstr "Telefone"
-
-msgid "Please fill in your contact details below."
-msgstr "Por favor, preencha seus detalhes de contato abaixo."
-
-msgid "Please set your contact information"
-msgstr "Por favor, defina a informação de contato"
-
-msgid "Power"
-msgstr "Potência"
-
-msgid "Processor"
-msgstr "Processador"
-
-msgid "Profile"
-msgstr "Perfil"
-
-msgid "Profile (Expert)"
-msgstr "Perfil (Especialista)"
-
-msgid "Realname"
-msgstr "Nome Real"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-"Selecione a sua localização com o mouse clicando no mapa. O mapa irá mostrar "
-"se você está conectado na internet."
-
-msgid "Show OpenStreetMap"
-msgstr "Mostrar o OpenStreetMap"
-
-msgid "Show on map"
-msgstr "Mostrar no mapa"
-
-msgid "Signal"
-msgstr "Sinal"
-
-msgid "Splash"
-msgstr "Splash"
-
-msgid "Start Upgrade"
-msgstr "Iniciar a Atualização"
-
-msgid "Statistics"
-msgstr "Estatística"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr "Sistema"
-
-msgid "TX"
-msgstr "TX"
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"O pacote <em>libiwinfo</em> não está instalado. Você precisa instalar este "
-"componente para ter uma configuração sem fio funcional!"
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-"O serviço OLSRd não está configurado para capturar os dados de posição da "
-"rede.<br /> Por favor, garnta que o plugin nameservice está corretametne "
-"configurado e que a opção <em>latlon_file</em> está habilitada."
-
-msgid "The installed firmware is the most recent version."
-msgstr "O firmware instalado é a última versão."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-"Estas são as configurações básicas para a comunidade sem fio local. Estas "
-"configurações definem os valores padrão para o assistente e NÃO afetam a "
-"configuração atual do roteador."
-
-msgid "These are the settings of your local community."
-msgstr "Estas são as configurações da sua comunidade local."
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-"Esta página ajudará você na configuração do seu roteador Freifunk ou de "
-"redes comunitárias sem fio similares."
-
-msgid "This is the access point"
-msgstr "Este é o ponto de acesso "
-
-msgid "Update Settings"
-msgstr "Configurações da Atualização"
-
-msgid "Update available!"
-msgstr "Existe uma atualização disponível!"
-
-msgid "Uptime"
-msgstr "Tempo de atividade"
-
-msgid "Verify downloaded images"
-msgstr "Verifique as imagens baixadas"
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Somos uma iniciativa para implementação de uma rede sem fio em malha livre, "
-"independente e não-comercial."
-
-msgid "Wireless Overview"
-msgstr "Visão Geral da Rede Sem Fio"
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-"Você pode mostrar conteúdo adicional na página índice pública inserindo "
-"XHTML válido no formulário abaixo.<br />As manchetes devem ficam entre &lt;"
-"h2&gt; e &lt;/h2&gt;."
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-"Você pode encontrar mais informações sobre a iniciativa global Freifunk em"
-
-msgid "You can manually edit the selected community profile here."
-msgstr "Você pode editar manualmente o perfil da comunidade selecionada aqui."
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-"Você precisa selecionar um perfil antes de poder editá-lo. Para selecionar "
-"um perfil, vá para"
-
-msgid "and fill out all required fields."
-msgstr "e preencher todos os campos obrigatórios."
-
-msgid "buffered"
-msgstr "no Buffer"
-
-msgid "cached"
-msgstr "no Cache"
-
-msgid "e.g."
-msgstr "ex:"
-
-msgid "free"
-msgstr "livre"
-
-msgid "to disable it."
-msgstr "para desabilitá-lo."
-
-msgid "used"
-msgstr "usado"
-
-msgid "wireless settings"
-msgstr "configurações da rede sem fio"
-
-#~ msgid ""
-#~ "No services can be shown, because olsrd is not running or the olsrd-"
-#~ "nameservice Plugin is not loaded."
-#~ msgstr ""
-#~ "Nenhum serviço pode ser mostrado porque o olsrd não está rodando ou o "
-#~ "plugin do olsrd-nameservice não está carregado."
-
-#~ msgid "Services"
-#~ msgstr "Serviços"
-
-#~ msgid "Source"
-#~ msgstr "Origem"
-
-#~ msgid ""
-#~ "The <em>libiwinfo-lua</em> package is not installed. You must install "
-#~ "this component for working wireless configuration!"
-#~ msgstr ""
-#~ "O pacote <em>libiwinfo-lua</em> não está instalado. Você deve instalar "
-#~ "este componente para ter uma configuração sem fio funcional!"
-
-#~ msgid "Url"
-#~ msgstr "URL"
diff --git a/po/pt_BR/hd_idle.po b/po/pt_BR/hd_idle.po
deleted file mode 100644
index 9abeb92..0000000
--- a/po/pt_BR/hd_idle.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2011-10-08 03:12+0200\n"
-"Last-Translator: luizluca <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Disk"
-msgstr "Disco"
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid "Enable debug"
-msgstr "Ativar depuração"
-
-msgid "Idle-time"
-msgstr "Tempo de ociosidade"
-
-msgid "Idle-time unit"
-msgstr "Unidade do tempo da ociosidade"
-
-msgid "Settings"
-msgstr "Configurações"
-
-# Hours
-msgid "h"
-msgstr "horas"
-
-msgid "hd-idle"
-msgstr "Hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"Hd-idle é um programa utilitário para ativar o modo \"economia de energia"
-"\" (spinning-down) de discos externos após um período de ociosidade."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "minutos"
diff --git a/po/pt_BR/meshwizard.po b/po/pt_BR/meshwizard.po
deleted file mode 100644
index e6a4952..0000000
--- a/po/pt_BR/meshwizard.po
+++ /dev/null
@@ -1,141 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-10-11 00:23+0200\n"
-"PO-Revision-Date: 2011-10-18 22:33+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Marque isto para proteger sua rede local (LAN) de outros nós ou clientes"
-
-msgid "Cleanup config"
-msgstr "Limpar configuração"
-
-msgid "Configure this interface"
-msgstr "Configure esta interface"
-
-msgid "DHCP IP range"
-msgstr "Faixa de IP do DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "O DHCP irá atribuir automaticamente endereços IP para os clientes"
-
-msgid "Enable DHCP"
-msgstr "Habilitar DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-"Se selecionado, a configuração é limpa antes de definir as novas opções de "
-"configuração."
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Mesh IP address"
-msgstr "Endereço IP da rede em malha"
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr "Assistente de Configuração da Rede em Malha"
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr "Proteget Rede Local (LAN)"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Selecione isto para permitir que outros usem sua conexão para acessar a "
-"internet."
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr "Compartilhar sua conexão com a internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Faixa de endereços IP atribuídos aos clientes (ex: 10.1.2.1/28). Se esta "
-"faixa está dentro da faixa da rede em malha, então ela será anunciada no "
-"<abbr title=\"Host and network association, Associação de equipamentos e "
-"redes\">HNA</abbr>. Qualquer outra faixa irá utilizar NAT. Se deixada vazia, "
-"os padrões do perfil da comunidade será usada."
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-"O endereço IP informado não está na faixa de endereços da rede em malha"
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Este é um endereço único na rede em malha (ex: 10.1.1.1) e tem que ser "
-"registrado na sua comunidade local."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Isto configurará uma nova interface de rede sem fio virtual em modo de ponto "
-"de acesso."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Este assistente irá ajudá-lo na configuração do seu roteador para Freifunk "
-"ou outra rede comunitária sem fio similar."
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Ponto de Acesso Virtual (VAP)"
-
-msgid "Wizard"
-msgstr "Assistente"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr "Seu dispositivo e os nós vizinhos devem utilizar o mesmo canal."
-
-msgid "recommended"
-msgstr "recomendado"
diff --git a/po/pt_BR/minidlna.po b/po/pt_BR/minidlna.po
deleted file mode 100644
index 3d53abd..0000000
--- a/po/pt_BR/minidlna.po
+++ /dev/null
@@ -1,193 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-msgid "Advanced Settings"
-msgstr "Configuração Avançada"
-
-msgid "Album art names:"
-msgstr "Nomes do Álbum artistico: "
-
-msgid "Announced model number:"
-msgstr "numero de modelo anunciado:"
-
-msgid "Announced serial number:"
-msgstr "Anunciar serial:"
-
-msgid "Browse directory"
-msgstr "Procurar diretório "
-
-msgid "Collecting data..."
-msgstr "Coletando dados..."
-
-msgid "Database directory:"
-msgstr "Banco de dados de diretório:"
-
-msgid "Enable TIVO:"
-msgstr "Ativar TIVO:"
-
-msgid "Enable inotify:"
-msgstr "Ativar inotify:"
-
-msgid "Enable:"
-msgstr "Ativado"
-
-msgid "Friendly name:"
-msgstr "Nome amigável:"
-
-msgid "General Settings"
-msgstr "Configuração Geral"
-
-msgid "Interfaces:"
-msgstr "Interfaces:"
-
-msgid "Log directory:"
-msgstr "Diretório de Log"
-
-msgid "Media directories:"
-msgstr "Diretórios de mídia:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNA é um software de servidor com o objetivo de ser totalmente "
-"compatível com os clientes DLNA / UPnP-AV."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Número do modelo do daemon miniDLNA irá relatar aos clientes em sua "
-"descrição XML."
-
-msgid "Music"
-msgstr "Musica"
-
-msgid "Network interfaces to serve."
-msgstr "As interfaces de rede para servir."
-
-msgid "Notify interval in seconds."
-msgstr "Notificação de intervalo em segundos."
-
-msgid "Notify interval:"
-msgstr "Intervalo de Notificação:"
-
-msgid "Pictures"
-msgstr "Imagems"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "Porta para HTTP (descrições, SOAP, transferência de mídia) de tráfego."
-
-msgid "Port:"
-msgstr "Porta:"
-
-msgid "Presentation URL:"
-msgstr "URL para Apresentação:"
-
-msgid "Root container:"
-msgstr "Root container:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Numero serial do miniDLNA daemon apresentará um relatório a clientes em sua "
-"descrição XML."
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-"Defina esta opção se você quiser personalizar o nome que aparece em seus "
-"clientes."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Defina esta opção se você gostaria de especificar o diretório onde você "
-"deseja MiniDLNA para armazenar seu banco de dados e cache de arte do álbum."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-"Defina esta opção se você gostaria de especificar o diretório onde você "
-"deseja MiniDLNA para armazenar seu arquivo de log."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"Defina esta opção para permitir o monitoramento inotify para descobrir "
-"automaticamente novos arquivos."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"Defina esta opção para habilitar o suporte para streaming. Jpg e. Arquivos "
-"MP3 para um TiVo suporte HMO."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Defina esta opção para aderir estritamente às normas DLNA. Isso permitirá "
-"que do lado do servidor downscaling de imagens muito grandes JPEG, que podem "
-"prejudicar o desempenho servindo em JPEG (pelo menos) os produtos da Sony "
-"DLNA."
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Defina esta opção para o diretório que você deseja verificar. Se você quiser "
-"restringir o diretório para um tipo específico de conteúdo, você pode "
-"prefixar o tipo ('A' para áudio, 'V' para o vídeo, 'P' para imagens), "
-"seguido por uma vírgula, para o diretório (por exemplo media_dir = A, / "
-"mnt / media / Música). Vários diretórios podem ser especificados."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "Especifique o caminho para o soquete MiniSSDPd."
-
-msgid "Standard container"
-msgstr "container padrão"
-
-msgid "Strict to DLNA standard:"
-msgstr "Strict para DLNA padrão:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"O serviço está ativo miniDLNA, servindo% d áudio, vídeo e arquivos% d% d "
-"imagem."
-
-msgid "The miniDLNA service is not running."
-msgstr "O serviço miniDLNA não está funcionando."
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-"Esta é uma lista de nomes de arquivos para verificar quando procurando arte "
-"do álbum."
-
-msgid "Video"
-msgstr "Video"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "miniDLNA Status"
-
-msgid "miniSSDP socket:"
-msgstr "miniSSDP soquete:"
diff --git a/po/pt_BR/mmc_over_gpio.po b/po/pt_BR/mmc_over_gpio.po
deleted file mode 100644
index 9fbbf0f..0000000
--- a/po/pt_BR/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-07-05 06:43+0200\n"
-"Last-Translator: rafaelff1 <rafael.f.f1@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr "CLK_pin"
-
-msgid "CS_pin"
-msgstr "CS_pin"
-
-msgid "DI_pin"
-msgstr "DI_pin"
-
-msgid "DO_pin"
-msgstr "DO_pin"
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid "MMC/SD driver configuration"
-msgstr "Configuração de driver MMC/SD"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Settings"
-msgstr "Configurações"
diff --git a/po/pt_BR/multiwan.po b/po/pt_BR/multiwan.po
deleted file mode 100644
index ba72b82..0000000
--- a/po/pt_BR/multiwan.po
+++ /dev/null
@@ -1,124 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-11 04:01+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Tentativas Antes da Solução de Contorno da WAN"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Tentativas Antes da Recuperação da WAN"
-
-msgid "Auto"
-msgstr "Automático"
-
-msgid "Collecting data..."
-msgstr "Coletando dados..."
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Configurar regras para direcionar a saída de tráfego através de uma conexão "
-"WAN específica."
-
-msgid "DNS Server(s)"
-msgstr "Servidor(es) DNS"
-
-msgid "Default Route"
-msgstr "Rota Padrão"
-
-msgid "Destination Address"
-msgstr "Endereço de Destino"
-
-msgid "Disable"
-msgstr "Desabilitar"
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid "Failing"
-msgstr "Falha"
-
-msgid "Failover Traffic Destination"
-msgstr "Destino do Tráfego para a Recuperação"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "Equipamento(s) para Monitoramento da Saúde por ICMP"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "Limite de tempo do Monitoramento da Saúde por ICMP"
-
-msgid "Health Monitor Interval"
-msgstr "Intervalo do Monitoramento da Saúde"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"O Monitoramento da Saúde detecta e corrige as mudanças de rede e falhas nas "
-"conexões."
-
-msgid "KO"
-msgstr "KO"
-
-msgid "Load Balancer Distribution"
-msgstr "Distribuição do Balanceador de Carga"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Balanceador de Carga(Compatibilidade)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Balanceador de Carga(Desempenho)"
-
-msgid "Multi-WAN"
-msgstr "Multi-WAN"
-
-msgid "Multi-WAN Status"
-msgstr "Status de Multi-WAN"
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Regras de Tráfego Multi-WAN"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"O Multi-WAN permite o use de múltiplas conexões ao enlace superior (ex: "
-"internet) para o balanceamento de carga e tolerância a falha."
-
-msgid "None"
-msgstr "Nenhum"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "Ports"
-msgstr "Portas"
-
-msgid "Protocol"
-msgstr "Procotolo"
-
-msgid "Recovering"
-msgstr "Recuperação"
-
-msgid "Source Address"
-msgstr "Endereço de Origem"
-
-msgid "Unknown"
-msgstr "Desconhecido"
-
-msgid "WAN Interfaces"
-msgstr "Interfaces WAN"
-
-msgid "WAN Uplink"
-msgstr "Conexão WAN"
-
-msgid "all"
-msgstr "todos"
diff --git a/po/pt_BR/ntpc.po b/po/pt_BR/ntpc.po
deleted file mode 100644
index 9e8849a..0000000
--- a/po/pt_BR/ntpc.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2011-10-18 22:38+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Clock Adjustment"
-msgstr "Ajuste do Relógio"
-
-msgid "Count of time measurements"
-msgstr "Quantidade de medições do tempo"
-
-msgid "Current system time"
-msgstr "Hora atual do sistema"
-
-msgid "General"
-msgstr "Geral"
-
-msgid "Hostname"
-msgstr "Nome do computador"
-
-msgid "Offset frequency"
-msgstr "Frequência da compensação"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Synchronizes the system time"
-msgstr "Sincroniza a hora do sistema"
-
-msgid "Time Server"
-msgstr "Servidor de Hora."
-
-msgid "Time Servers"
-msgstr "Servidores de Hora"
-
-msgid "Time Synchronisation"
-msgstr "Sincronização de Horário"
-
-msgid "Update interval (in seconds)"
-msgstr "Intervalo de atualização (em segundos)"
-
-msgid "empty = infinite"
-msgstr "vazio = infinito"
diff --git a/po/pt_BR/olsr.po b/po/pt_BR/olsr.po
deleted file mode 100644
index 03cf8e6..0000000
--- a/po/pt_BR/olsr.po
+++ /dev/null
@@ -1,713 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-27 00:39+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Active MID announcements"
-msgstr ""
-"Anúncios <abbr title=\"Multiple interface declaration,Declaração de "
-"interface múltipla\">MID</abbr> ativos"
-
-msgid "Active OLSR nodes"
-msgstr "Nós OLSR ativos"
-
-msgid "Active host net announcements"
-msgstr "Anúncios ativos de equipamentos"
-
-msgid "Advanced Settings"
-msgstr "Configurações Avançadas"
-
-msgid "Allow gateways with NAT"
-msgstr "Permitir rotadores com NAT"
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr "Permitir a seleção de rotador de saída IPv4 com NAT"
-
-msgid "Announce uplink"
-msgstr "Anunciar enlace superior (uplink)"
-
-msgid "Announced network"
-msgstr "Rede anunciada"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr "Ambos os valores devem usar a notação decimal com pontos."
-
-msgid "Broadcast address"
-msgstr "Endereço de broadcast"
-
-msgid "Configuration"
-msgstr "Configuração"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid "Display"
-msgstr "Visão"
-
-msgid "Downlink"
-msgstr "Enlace inferior (downlink)"
-
-# I didn't find in GUI this one
-msgid "Download Config"
-msgstr "Configuração do Recebimento de Dados "
-
-msgid "ETX"
-msgstr "ETX"
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-"Habilita o SmartGateway. Se isto está desabilitado, então todos os demais "
-"parâmetros do SmartGateway são ignorados. Padrão é \"não\"."
-
-msgid "Enable this interface."
-msgstr "Habilita esta interface."
-
-msgid "Enabled"
-msgstr "Habilitado"
-
-msgid "Expected retransmission count"
-msgstr "Contagem esperada de retransmissões"
-
-msgid "FIB metric"
-msgstr "Métrica FIB"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-"A métrica FIB controla o valor da métrica dos conjuntos de equipamentos-"
-"roteadores. \"flat\" significa que o valor da métrica é sempre 2. Este é o "
-"valor preferido porque ele ajuda o roteamento do kernel do Linux limpar as "
-"rotas antigas. \"correct\" usa a contagem de saltos como valor da métrica. "
-"\"approx\" também usa a contagem de saltos como métrica, mas somente "
-"atualiza a contagem de saltos se o próximo salto também mudar. O padrão é "
-"\"flat\"."
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-"Mecanismo Fisheye para <abbr title=\"Topology Control, Controle de Topologia"
-"\">TC</abbr>s (marcado significa ligado). O padrão é \"ligado\""
-
-msgid "Gateway"
-msgstr "Roteador"
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "General settings"
-msgstr "Configurações gerais"
-
-msgid "HNA"
-msgstr ""
-"<abbr title=\"Host and network association, Associação de equipamentos e "
-"redes\">HNA</abbr>"
-
-msgid "HNA Announcements"
-msgstr ""
-"Anúncios do <abbr title=\"Host and network association, Associação de "
-"equipamentos e redes\">HNA</abbr>"
-
-msgid "HNA interval"
-msgstr ""
-"Intervalo entre <abbr title=\"Host and network association, Associação de "
-"equipamentos e redes\">HNA</abbr>"
-
-msgid "HNA validity time"
-msgstr ""
-"Validade do <abbr title=\"Host and network association, Associação de "
-"equipamentos e redes\">HNA</abbr>"
-
-msgid "Hello"
-msgstr "Saudação (Hello)"
-
-msgid "Hello interval"
-msgstr "Intervalo entre Saudações (Hello)"
-
-msgid "Hello validity time"
-msgstr "Validade da Saudação (Hello)"
-
-msgid "Hna4"
-msgstr "Hna4"
-
-msgid "Hna6"
-msgstr "Hna6"
-
-msgid "Hops"
-msgstr "Saltos"
-
-msgid "Hostname"
-msgstr "Nome do equipamento"
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-"Equipamentos em uma rede roteada por OLSR podem anunciar conectividade para "
-"redes externas usando mensagens HNA."
-
-# Hysteresis é Histerese que significa "retardo"
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-"Retardo para a sensibilidade do enlace (somente para a métrica de contagem "
-"de saltos), Retardo incrementa a robustez da sensibilidade do enlace mas "
-"atrasa o registro dos vizinhos. O padrão é \"sim\""
-
-msgid "IP Addresses"
-msgstr "Endereços IP"
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-"Versão do IP para usar. Se 6and4 for selecionado, então uma instância é "
-"disparada para cada protocolo."
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 broadcast"
-msgstr "Endereço IPv4 de Broadcast"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-"Endereço IPv5 de broadcast para a saída de pacotes OLSR. Um exemplo útil "
-"seria 255.255.255.255. O padrão é \"0.0.0.0\", que indica o uso do endereço "
-"IP de broadcast da interface."
-
-msgid "IPv4 source"
-msgstr "Origem IPv4"
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-"Endereço IPv4 de origem para a saída de pacotes OLSR. Um exemplo útil seria "
-"255.255.255.255. O padrão é \"0.0.0.0\", que indica o uso do endereço IP da "
-"interface."
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 multicast"
-msgstr "Multicast IPv6"
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-"Endereço de multicast IPv6. O padrão é \"FF02::6D\", o multicast do enlace "
-"local do roteador MANET."
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-"A rede IPv6 deve ser informada em notação completa. O prefixo deve ser em "
-"notação CIDR."
-
-msgid "IPv6 source"
-msgstr "Origem IPv6"
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-"Prefixo de origem IPv6. O OLSRd escolherá um dos IPs da interface que casam "
-"com o prefixo do parâmetro. O padrão é \"0::/0\", que faz com que seja usado "
-"um endereço IP não local da interface."
-
-msgid "IPv6-Prefix of the uplink"
-msgstr "Prefixo IPv6 do enlace superior (uplink)"
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-"Se a rota para o roteador está para ser alterada, o valor ETX deste roteador "
-"é multiplicado com o este valor antes que ele seja comparado com o novo "
-"valor. O parâmetro pode ser um valor entre 0.1 e 1.0, mas deve ser próximo a "
-"1.0 se alterado..<br /><b>CUIDADO:</b> Este parâmetro não deve ser usado em "
-"conjunto com a métrica etx_ffeth!<br />O padrão é \"1.0\"."
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr "Se este Nó usa NAT para conexões com a internet. Padrão é \"sim\"."
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-"Modo da Interface é usado para evitar o encaminhamento desnecessário de "
-"pacotes na interface ethernet em ponte. Os modos válidos são \"mesh\" e "
-"\"ether\". O padrão é \"mesh\"."
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interfaces Defaults"
-msgstr "Padrões da Interface"
-
-msgid "Internet protocol"
-msgstr "Protocolo internet"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-"Intervalo para consultar as interfaces de rede por mudanças nas "
-"configurações (em segundos). O padrão é \"2.5\"."
-
-msgid "Known OLSR routes"
-msgstr "Rotas OLSR conhecidas"
-
-msgid "LQ"
-msgstr "<abbr title=\"Link Quality, Qualidade do Enlace\">LQ</abbr>"
-
-msgid "LQ aging"
-msgstr ""
-"Envelhecimento do <abbr title=\"Link Quality, Qualidade do Enlace\">LQ</abbr>"
-
-msgid "LQ algorithm"
-msgstr "Algoritmo <abbr title=\"Link Quality, Qualidade do Enlace\">LQ</abbr>"
-
-msgid "LQ fisheye"
-msgstr "Fisheye <abbr title=\"Link Quality, Qualidade do Enlace\">LQ</abbr>"
-
-msgid "LQ level"
-msgstr "Nível <abbr title=\"Link Quality, Qualidade do Enlace\">LQ</abbr>"
-
-msgid "Last hop"
-msgstr "Último salto"
-
-msgid "Legend"
-msgstr "Legenda"
-
-msgid "Library"
-msgstr "Biblioteca"
-
-msgid "Link Quality Settings"
-msgstr "Configurações da Qualidade do Enlace"
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-"O fator de envelhecimento da qualidade do enlace (somente para <abbr title="
-"\"Link Quality, Qualidade do Enlace\">LQ</abbr> nível 2). Parâmtro de ajuste "
-"para etx_float e etx_fpm, Valores menores significam mudanças mais lentas do "
-"valor ETX. (permitido valores entre 0.01 e 1.0)"
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-"Algoritmo de qualidade do enlace (somente para <abbr title=\"Link Quality, "
-"Qualidade do Enlace\">LQ</abbr> nível 2). <br /><b>etx_float</b>: ETX ponto "
-"flutuante com o envelhecimento exponencial<br /><b>etx_fpm</b> : o mesmo que "
-"etx_float, mas com aritmética inteira<br /><b>etx_ff</b> : ETX freifunk, uma "
-"variante do etx que usa todo tráfego OLSE (ao invés de somente as saudações) "
-"para o cálculo do ETX<br /><b>etx_ffeth</b>: variação incompatível do etx_ff "
-"que permite enlaces ethernet com ETX 0.1.<br />O padrão é \"etx_ff\""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-"O nível de qualidade do enlace escolhe entre o roteamento por contagem de "
-"saltos e o roteamento baseado em custos (na sua maioria, ETX). <br /><b>0</"
-"b> = não use a qualidade do enlace<br /><b>2</b> = use a qualidade do enlace "
-"para a seleção do MPR e roteamento<br />O padrão é \"2\""
-
-msgid "LinkQuality Multiplicator"
-msgstr "Multiplicador da Qualidade do Enlace"
-
-msgid "Links per node (average)"
-msgstr "Enlaces por nó (média)"
-
-msgid "Links total"
-msgstr "Total de enlaces"
-
-msgid "Local interface IP"
-msgstr "Endereço IP da interface local"
-
-msgid "MID"
-msgstr ""
-"<abbr title=\"Multiple interface declaration,Declaração de interface múltipla"
-"\">MID</abbr>"
-
-msgid "MID interval"
-msgstr ""
-"Intervalo do <abbr title=\"Multiple interface declaration,Declaração de "
-"interface múltipla\">MID</abbr>"
-
-msgid "MID validity time"
-msgstr ""
-"Validade do <abbr title=\"Multiple interface declaration,Declaração de "
-"interface múltipla\">MID</abbr>"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Main IP"
-msgstr "IP Principal"
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Certifique-se que o processo OLSRd está em execução, que o plugin \"txtinfo"
-"\" está carregado e configurado para a porta 2006 e que aceita conexões a "
-"partir de \"127.0.0.1\"."
-
-msgid "Metric"
-msgstr "Métrica"
-
-msgid "Mode"
-msgstr "Modo"
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-"Multiplica rotas com o fator informado. Os valores válidos são entre 0.01 e "
-"1. Somente é usado quando o nível <abbr title=\"Link Quality, Qualidade do "
-"Enlace\">LQ</abbr> é maior que 0. Exemplos:<br />reduzir o <abbr title="
-"\"Link Quality, Qualidade do Enlace\">LQ</abbr> para 192.168.0.1 pela "
-"metade: 192.168.0.1 0.5<br />reduzir o <abbr title=\"Link Quality, Qualidade "
-"do Enlace\">LQ</abbr> de todos os nós desta interface para 20%: Padrão 0.8"
-
-msgid "NAT threshold"
-msgstr "Limiar do NAT"
-
-msgid "NLQ"
-msgstr ""
-"<abbr title=\"Neighbor Link Quality, Qualidade do Enlace do Vizinho\">NLQ</"
-"abbr>"
-
-msgid "Neighbors"
-msgstr "Vizinhos"
-
-msgid "Neighbour IP"
-msgstr "Endereço IP do Vizinho"
-
-msgid "Neighbours"
-msgstr "Vizinhos"
-
-msgid "Netmask"
-msgstr "Máscara de rede"
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "Network address"
-msgstr "Endereço de rede"
-
-msgid "Nic changes poll interval"
-msgstr "Intervalo de consulta de mudanças na placa de rede"
-
-msgid "Nodes"
-msgstr "Nós"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "OLSR - Display Options"
-msgstr "OLSR - Opções de Visão"
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-"OLSR - Anúncios <abbr title=\"Host and network association, Associação de "
-"equipamentos e redes\">HNA</abbr>"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - Plugins"
-
-msgid "OLSR Daemon"
-msgstr "Servidor OLSR"
-
-msgid "OLSR Daemon - Interface"
-msgstr "Servidor OLSR - Interface"
-
-msgid "OLSR connections"
-msgstr "Conexões do OLSR"
-
-msgid "OLSR gateway"
-msgstr "Roteador OLSR"
-
-msgid "OLSR node"
-msgstr "Nó OLSR"
-
-msgid "Overview"
-msgstr "Visão Geral"
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Visão geral os anúncios de rede de equipamentos OLSR atualmente ativos"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Visão geral das conexões OLSR atualmente estabelecidas"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Visão geral dos nós OLSR conhecidos atualmente"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Visão geral das rotas conhecidas atualmente para outros nós OLSR"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr "Visão geral das interfaces onde o OLSR está rodando"
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Visão geral de anúncios de nós com múltiplas interfaces conhecidas"
-
-msgid "Overview of smart gateways in this network"
-msgstr "Visão geral dos SmartGateways na rede"
-
-msgid "Plugin configuration"
-msgstr "Configuração do Plugin"
-
-msgid "Plugins"
-msgstr "Plugins"
-
-# Que socket?
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr "Taxa de consulta por conexões OLSR, em segundos. Padrão é 0.05."
-
-msgid "Pollrate"
-msgstr "Taxa de consulta"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Prefix"
-msgstr "Prefixo"
-
-msgid "Resolve"
-msgstr "Resolver"
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-"Resolve os nomes dos equipamentos na página de estado. É geralmente seguro "
-"permitir isto, mas se você usa IPs públicos e tem uma configuração DNS "
-"instável, então estas páginas podem carregar de forma extremamente lenta. "
-"Neste caso, desabilite isto aqui."
-
-msgid "Routes"
-msgstr "Rotas"
-
-msgid "Secondary OLSR interfaces"
-msgstr "Interfaces OLSR secundárias"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-"Define o IP principal (ip originador) do seu roteador. Este IP nunca muda "
-"durante o funcionamento do olsrd. O padrão é 0.0.0.0, que faz com que o "
-"endereço da primeira interface seja usado."
-
-msgid "SmartGW"
-msgstr "SmartGW"
-
-msgid "SmartGW announcements"
-msgstr "Anúncios do SmartGW"
-
-msgid "SmartGateway is not configured on this system."
-msgstr "SmartGateway não está configurado no seu sistema."
-
-msgid "Source address"
-msgstr "Endereço de origem"
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-"Especifica a velocidade do enlace superior (uplink) em kilobits/s. O "
-"primeiro parâmetro é a taxa de envio (upstream) e o segundo parâmetro é a "
-"taxa de recebimento (downstream). O padrão é \"128 1024\"."
-
-msgid "Speed of the uplink"
-msgstr "Velocidade do enlace superior"
-
-msgid "State"
-msgstr "Estado"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Success rate of packages received from the neighbour"
-msgstr "Taxa de sucesso de pacotes recebidos de vizinhos"
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr "Taxa de sucesso de pacotes enviados a vizinhos"
-
-msgid "TC"
-msgstr "<abbr title=\"Topology Control, Controle de Topologia\">TC</abbr>"
-
-msgid "TC interval"
-msgstr ""
-"Intervalo do <abbr title=\"Topology Control, Controle de Topologia\">TC</"
-"abbr>"
-
-msgid "TC validity time"
-msgstr ""
-"Validade do <abbr title=\"Topology Control, Controle de Topologia\">TC</abbr>"
-
-msgid "TOS value"
-msgstr "Valor do TOS"
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-"O servidor OLSR é uma implementação do protoloco de Roteamento de Estado de "
-"Enlace Otimizado. Como tal, ele permite o roteamento em malha para qualquer "
-"equipamento de rede. Ele roda sobre qualquer placa de rede sem fio que "
-"suporte o modo ad-hoc e, é claro, em qualquer dispositivo ethernet. Visite "
-"<a href='http://www.olsr.org'>olsrd.org</a> para ajuda e documentação."
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-"A disponibilidade fixa para ser usada. Se a disponibilidade não for "
-"definida, ela será dinamicamente calculada baseada no estado da energia/"
-"bateria, O padrão é \"3\"."
-
-msgid "The interface OLSRd should serve."
-msgstr "A interface onde o OLSRd deve servir."
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-"A porta que o OLSR usa. Isto geralmente deve ficar na porta 698, designada "
-"pela IANA. Pode ter qualquer valor entre 1 e 65535."
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-"Isto pode ser usado para sinalizar o prefixo IPv6 externo do enlace superior "
-"(uplink) para os clientes. Isto pode permitir que um cliente mude o endereço "
-"IPv6 local para usar o roteador IPv6 sem qualquer tradução de endereços. O "
-"tamanho máximo do prefixo é 64 bits. O padrão é \"::/0\" (nenhum prefixo)."
-
-msgid "Timing and Validity"
-msgstr "Temporização e Validade"
-
-msgid "Topology"
-msgstr "Topologia"
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-"Valor do tipo de serviço para o cabeçalho IP para controle de tráfego. O "
-"padrao é \"16\"."
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "Não foi possível conectar ao servidor OLSR!"
-
-msgid "Uplink"
-msgstr "Enlace superior (uplink)"
-
-msgid "Uplink uses NAT"
-msgstr "Enlace superior (uplink) usa NAT"
-
-msgid "Use hysteresis"
-msgstr "Usar retardo"
-
-msgid "Version"
-msgstr "Versão"
-
-msgid "WLAN"
-msgstr "Rede sem fio (WLAN)"
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-"Atenção: o kmod-ipip não está instalado. Sem o kmod-ipip, o SmartGateway não "
-"irá funcionar. Por favor, instale-o."
-
-msgid "Weight"
-msgstr "Peso"
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-"Quando múltiplos enlaces existirem entre dois equipamentos, o peso da "
-"interface é usado para determinar o enlace usado. Normalmente, o peso é "
-"automaticamente calculado pelo olsrd baseado nas características da "
-"interface, mas aqui você pode especificar um valor fixo. Olsrd escolherá "
-"enlaces com o valor mais baixo.<br /><b>Nota:</b> O peso da interface é "
-"usado somente quando o nível de qualidade do enlace está definido como 0. "
-"Para qualquer outro valor do nível de qualidade do enlace, o valor ETX da "
-"interface é usado."
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-"Que tipo de enlace superior (uplink) é exportado para outros nós da rede em "
-"malha. Um enlace superior é detectado buscando por uma <abbr title=\"Host "
-"and network association, Associação de equipamentos e redes\">HNA</abbr> "
-"local de 0.0.0.0/0, ::ffff:0:0/96 ou 2000::/3. O padrão é \"ambos\"."
-
-msgid "Willingness"
-msgstr "Disponibilidade"
diff --git a/po/pt_BR/openvpn.po b/po/pt_BR/openvpn.po
deleted file mode 100644
index 4c537a7..0000000
--- a/po/pt_BR/openvpn.po
+++ /dev/null
@@ -1,566 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-16 02:31+0200\n"
-"Last-Translator: Julio Cezar <jsilvestree@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', ou 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Aceitar opções enviadas pelo servidor"
-
-msgid "Add"
-msgstr "Adicionar"
-
-msgid "Add route after establishing connection"
-msgstr "Adicionar rota após estabelecimento da conexão"
-
-msgid "Additional authentication over TLS"
-msgstr "Autenticação adicional por TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Permitir tráfego entre os clientes"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Permitir múltiplos clientes com o mesmo certificado"
-
-msgid "Allow only one session"
-msgstr "Permitir apenas uma sessão"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Permitir a um equipamento remoto altere o seu IP ou porta"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Máximo permitido de clientes conectados"
-
-msgid "Allowed maximum of internal"
-msgstr "Máximo permitido internamente para rotas de clientes"
-
-msgid "Allowed maximum of new connections"
-msgstr "Máximo permitido de novas conexões"
-
-msgid "Append log to file"
-msgstr "Acrescentar registos ao arquivo"
-
-msgid "Authenticate using username/password"
-msgstr "Autenticar com usuário/senha"
-
-msgid "Automatically redirect default route"
-msgstr "Redirecionar automaticamente a rota padrão"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Abaixo está uma lista de todas as instâncias OpenVPN configuradas e o seu "
-"estado atual"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "Executar o comando/script antes do tun/tap fechar"
-
-msgid "Certificate authority"
-msgstr "Autoridade certificadora"
-
-msgid "Change process priority"
-msgstr "Alterar prioridade do processo"
-
-msgid "Change to directory before initialization"
-msgstr "Mudar para o directório antes da inicialização"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Verificar certificado do parceiro conta uma CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Chroot para o diretório após a inicialização"
-
-msgid "Client is disabled"
-msgstr "Cliente desativado"
-
-msgid "Configuration category"
-msgstr "Categoria da configuração"
-
-msgid "Configure client mode"
-msgstr "Configurar modo cliente"
-
-msgid "Configure server bridge"
-msgstr "Configurar ponte de servidor"
-
-msgid "Configure server mode"
-msgstr "Configurar modo de servidor"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Conectar através de um proxy Socks5"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "Conectar a equipamento remoto através de um proxy HTTP"
-
-msgid "Connection retry interval"
-msgstr "Intervalo de reestabelecimento de conexão"
-
-msgid "Cryptography"
-msgstr "Criptografia"
-
-msgid "Daemonize after initialization"
-msgstr "Entre em segundo plano após a inicialização"
-
-msgid "Delay n seconds after connection"
-msgstr "Atrase n segundos depois da conexão"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "Retardar o script de abertura e ativação do tun/tap"
-
-msgid "Diffie Hellman parameters"
-msgstr "Parâmetros Diffie-Hellman"
-
-msgid "Directory for custom client config files"
-msgstr "Diretório para configurações personalizadas dos clientes"
-
-msgid "Disable Paging"
-msgstr "Desativar paginação"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Desativar o vector de inicialização da cifra"
-
-msgid "Disable options consistency check"
-msgstr "Desativar opções de verificação de consistência"
-
-msgid "Disable replay protection"
-msgstr "Desativar proteção contra replay"
-
-msgid "Do not bind to local address and port"
-msgstr "Não ativar no endereço e porta locais"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Não executar ifconfig de verdade"
-
-msgid "Don't add routes automatically"
-msgstr "Não adicionar rotas automaticamente"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "Não colocar em cache as senhas do --askpass ou --auth-user-pass "
-
-msgid "Don't inherit global push options"
-msgstr "Não herdar as opções globais de envio (push)"
-
-msgid "Don't log timestamps"
-msgstr "Não registar a data/hora"
-
-msgid "Don't re-read key on restart"
-msgstr "Não reler a chave entre os reinícios"
-
-msgid "Don't require client certificate"
-msgstr "Não solicitar certificado ao cliente"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Não usar compressão LZO adaptiva"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "Não avisar quando existirem inconsistências no ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Escrever parâmetros no registo"
-
-msgid "Empirically measure MTU"
-msgstr "Medir empíricamente o MTU"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Ativar motor OpenSSL por hardware"
-
-msgid "Enable Path MTU discovery"
-msgstr "Ativar a descoberta do MTU do caminho"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Ativar modo de encriptação por chave estática (não-TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Ativar TLS e assumir papel de cliente"
-
-msgid "Enable TLS and assume server role"
-msgstr "Ativar TLS e assumir papel de servidor"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Ativar a fragmentação interna de datagramas"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Ativar o interface de gestão em <em>IP</em> <em>porta</em>"
-
-msgid "Enabled"
-msgstr "Ativado"
-
-msgid "Encryption cipher for packets"
-msgstr "Cifra de encriptação para pacotes"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Executar o comando shell após as rotas serem adicionadas"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Executar o comando shell quando existir alteração do IP remoto"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-"Executado em modo servidor na nova conexão de cliente, enquanto o cliente "
-"ainda não é confiável"
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-"Executado em modo servidor quando um endereço/rota IPv4 é adicionao na "
-"tabela de roteamento interna do OpenVPN"
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Fechar quando existir falha na negociacao TLS"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Obter password PEM do terminal de controlo antes de passar a daemon"
-
-msgid "HMAC authentication for packets"
-msgstr "Autenticação HMAC para pacotes"
-
-msgid "Handling of authentication failures"
-msgstr "Gestão de falhas de autenticação"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-"Diretiva de ajuda para simplificar a expressão --ping e --ping-restart nas "
-"configurações de modo servidor"
-
-msgid "If hostname resolve fails, retry"
-msgstr "Se a resolução de nomes falhar, tentar novamente"
-
-msgid "Instance \"%s\""
-msgstr "Instância \"%s\""
-
-msgid "Invalid"
-msgstr "Inválido"
-
-msgid "Keep local IP address on restart"
-msgstr "Manter o endereço IP local entre os reinícios"
-
-msgid "Keep remote IP address on restart"
-msgstr "Manter o endereço IP remoto entre os reinícios"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Manter o dispositivo tun/tap aberto entre os reinícios"
-
-msgid "Key transition window"
-msgstr "Janela para transição de chaves"
-
-msgid "Limit repeated log messages"
-msgstr "Limitar entradas repetidas no registo"
-
-msgid "Local certificate"
-msgstr "Certificado local"
-
-msgid "Local host name or ip address"
-msgstr "Nome do equipamento ou endereço IP local"
-
-msgid "Local private key"
-msgstr "Chave privada local"
-
-msgid "Major mode"
-msgstr "Modo principal"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Tornar o dispositivo tun capaz de IPv6"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Número máximo de pacotes TCP na fila de saída"
-
-# Which context?
-msgid "Networking"
-msgstr "Rede"
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Número de buffers de broadcast alocados"
-
-msgid "Number of lines for log file history"
-msgstr "Número de linhas para o histórico do registo"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Aceitar conexões apenas de um dado nome X509"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "Só processe os estouros de tempo de pings se as rotas existirem"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Instâncias OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Otimizar as escritas TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Enviar para o syslog os registos e não vá para segundo plano"
-
-msgid "Overview"
-msgstr "Visão Geral"
-
-msgid "PKCS#12 file containing keys"
-msgstr "Arquivo PKCS#12 com as chaves"
-
-msgid "Pass environment variables to script"
-msgstr "Passar variáveis de ambiente ao script"
-
-msgid "Persist replay-protection state"
-msgstr "Manter persistência da proteção replay"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Manter ou não o conjunto de subredes"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Pingar o remoto a cada n segundos sobre a porta TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr "Nível da política sobre o uso de programas e scripts externos"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Proxy timeout in seconds"
-msgstr "Tempo limite do proxy em segundos"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Enviar uma opção ifconfig ao remoto"
-
-msgid "Push options to peer"
-msgstr "Enviar opções ao remoto"
-
-msgid "Query management channel for private key"
-msgstr "Solicitar chave privada ao canal de gestão"
-
-msgid "Randomly choose remote server"
-msgstr "Escolher o server remoto aleatoriamente"
-
-msgid "Refuse connection if no custom client config"
-msgstr "Recusar conexões de clientes que não tenham configuração personalizada"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Remapear os sinais SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Nome do equipamento ou endereço IP remoto"
-
-msgid "Remote ping timeout"
-msgstr "Tempo limite do ping remoto"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Renegociar chave do canal de dados após n bytes"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Renegociar chave do canal de dados após n pacotes"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "Renegociar chave do canal de dados após n segundos"
-
-msgid "Replay protection sliding window size"
-msgstr "Tamanho da janela de proteção conta replay"
-
-msgid "Require explicit designation on certificate"
-msgstr "Requerer designação específica no certificado"
-
-msgid "Require explicit key usage on certificate"
-msgstr "Requerer que o uso da chave seja explicitado no certificado"
-
-msgid "Restart after remote ping timeout"
-msgstr "Reiniciar após estouro do tempo do ping remoto"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Estouro de tempo de retransmissão no canal de controle TLS"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Tentar infinitamente a conexão quando existirem erros de proxy Socks"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Tentar infinitamente a conexão quando existirem erros de proxy Socks"
-
-msgid "Route subnet to client"
-msgstr "Encaminhar rota da subrede para o cliente"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Executar através do inetd ou xinetd"
-
-msgid "Run script cmd on client connection"
-msgstr "Executar script quando o cliente conectar"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Executar script quando o cliente desconectar"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Executar scripts de subida/descida para todos os reinícios"
-
-msgid "Send notification to peer on disconnect"
-msgstr "Notificar parceiro remoto ao desconectar"
-
-msgid "Service"
-msgstr "Serviço"
-
-msgid "Set GID to group"
-msgstr "Usar o GID do grupo"
-
-msgid "Set TCP/UDP MTU"
-msgstr "Definir o MTU TCP/UDP"
-
-msgid "Set UID to user"
-msgstr "Usar o UID do usuário"
-
-msgid "Set aside a pool of subnets"
-msgstr "Reservar um conjunto de subredes"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Definir opções extendidas para o proxy HTTP"
-
-msgid "Set output verbosity"
-msgstr "Definir detalhamento do registo"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr "Definir tamanho das tabelas hash de endereços reais e virtuais"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Definir o tamanho do buffer de recepção TCP/UDP"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Definir o tamanho do buffer de envio TCP/UDP"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Definir o tamanho da fila de transmissão tun/tap"
-
-msgid "Set tun/tap adapter parameters"
-msgstr "Definir parâmetros do adaptador TUN/TAP"
-
-msgid "Set tun/tap device MTU"
-msgstr "Definir o MTU do dispositivo tun/tap"
-
-msgid "Set tun/tap device overhead"
-msgstr "Definir o overhead do dispositivo tun/tap"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Definir teto do MSS TCP"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Restringir a largura de banda ao parceiro"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Comando shell para executar após abertura do dispositivo tun"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Comando shell para executar após o fechamento do dispositivo tun"
-
-msgid "Shell command to verify X509 name"
-msgstr "Comando shell para verificar o nome do X509"
-
-msgid "Silence the output of replay warnings"
-msgstr "Silenciar a saída dos avisos de replay"
-
-msgid "Size of cipher key"
-msgstr "Tamanho da chave de cifragem"
-
-msgid "Specify a default gateway for routes"
-msgstr "Especificar uma roteador padrão para as rotas"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Iniciar o OpenVPN em estado de hibernação"
-
-msgid "Start/Stop"
-msgstr "Iniciar/Parar"
-
-msgid "Started"
-msgstr "Iniciado"
-
-msgid "Status file format version"
-msgstr "Versão de formato do arquivo de estado"
-
-msgid "Switch to advanced configuration »"
-msgstr "Mudar para configuração avançada »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Porta TCP/UDP tanto para local e remoto"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Porta TCP/UDP para local (padrão=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Porta TCP/UDP para remoto (padrão=1194)"
-
-msgid "TLS cipher"
-msgstr "Cifra TLS"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "Encaminhe TOS (aplicável apenas a IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Diretório temporário para arquivo de retorno de conexão-cliente"
-
-msgid "Timeframe for key exchange"
-msgstr "Janela temporal para troca de chaves"
-
-msgid "Type of used device"
-msgstr "Tipo de dispositivo utilizado"
-
-msgid "Use fast LZO compression"
-msgstr "Usar compressão LZO rápida"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Usar endereços individuais em vez de subredes /30"
-
-msgid "Use protocol"
-msgstr "Usar protocolo"
-
-msgid "Use tun/tap device node"
-msgstr "Utilizar dispositivo tun/tap"
-
-msgid "Use username as common name"
-msgstr "Usar o nome do usuário como 'common name' (CN)"
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr "Escrever registo no arquivo"
-
-msgid "Write process ID to file"
-msgstr "Escrever PID no arquivo"
-
-msgid "Write status to file every n seconds"
-msgstr "Escrever estado para arquivo a cada n segundos"
-
-msgid "no"
-msgstr "não"
-
-msgid "tun/tap device"
-msgstr "Dispositivo tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr "Tempo limite de inatividade tun/tap"
-
-msgid "yes (%i)"
-msgstr "sim (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Mudar para configuração básica"
-
-#~ msgid "openvpn_%s"
-#~ msgstr "openvpn_%s"
-
-#~ msgid "openvpn_%s_desc"
-#~ msgstr "openvpn_%s_desc"
diff --git a/po/pt_BR/p2pblock.po b/po/pt_BR/p2pblock.po
deleted file mode 100644
index de36381..0000000
--- a/po/pt_BR/p2pblock.po
+++ /dev/null
@@ -1,30 +0,0 @@
-msgid "Block Time"
-msgstr "Tempo de bloqueio"
-
-msgid "Enable P2P-Block"
-msgstr "Habilite o bloqueio P2P"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Protocolos da camada de aplicação"
-
-msgid "P2P-Block"
-msgstr "P2P-Block"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"P2P-Block é um mecanismo de lista cinza para bloquear vários protocolos "
-"peer-to-peer para clientes fora da lista branca."
-
-msgid "Portrange"
-msgstr "Faixa de porta"
-
-msgid "Whitelisted IPs"
-msgstr "IPs na lista branca"
-
-msgid "seconds"
-msgstr "segundos"
diff --git a/po/pt_BR/p910nd.po b/po/pt_BR/p910nd.po
deleted file mode 100644
index cac5efc..0000000
--- a/po/pt_BR/p910nd.po
+++ /dev/null
@@ -1,49 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2011-10-17 21:47+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Bidirectional mode"
-msgstr "Modo bidirecional"
-
-msgid "Device"
-msgstr "Dispositivo"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Primeiro você deve instalar os pacotes para obter suporte USB (kmod-usb-"
-"printer) ou porta paralela (kmod-lp)."
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Settings"
-msgstr "Configurações"
-
-msgid "TCP listener port."
-msgstr "Porta TCP de escuta."
-
-msgid "enable"
-msgstr "habilitado"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Servidor de impressão"
-
-#~ msgid "port_help"
-#~ msgstr ""
-#~ "p910nd escuta na porta 910x. Por exemplo, 9100 para a primeira impressora."
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr "p910nd escuta na porta 910+N. Ex. 9100 para a primeira impressora."
diff --git a/po/pt_BR/pbx-voicemail.po b/po/pt_BR/pbx-voicemail.po
deleted file mode 100644
index 2e3a51e..0000000
--- a/po/pt_BR/pbx-voicemail.po
+++ /dev/null
@@ -1,175 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-16 02:32+0200\n"
-"Last-Translator: Julio Cezar <jsilvestree@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr "Endereços de correio eletrônicos que Recebem Correio de Voz"
-
-msgid "Enable Voicemail"
-msgstr "Habilitar o Correio de Voz"
-
-msgid "Global Voicemail Setup"
-msgstr "Configuração Global do Correio de Voz"
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-"Aqui você pode configurar um correio de voz global para este PBX. Uma vez "
-"que este sistema é previsto para ser executado em ambientes embarcados como "
-"roteadores, não existe armazenamento local do correio de voz - ele deve ser "
-"enviado por correio eletrônico. Desta maneira, você deve configurar um "
-"servidor (SMTP) de correio eletrônico (por exemplo, o servidor SMTP do seu "
-"provedor de Internet, do Google ou do Yahool), e fornecer uma lista dos "
-"endereços para os quais o correio de voz será enviado."
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-"Para este PBX enviar mensagens eletrônicas contendo as gravações do correio "
-"de voz, você precisa definir aqui um servidor SMTP. Seu provedor de Internet "
-"geralmente fornece um servidor SMTP para este propósito. Você também pode "
-"usar um servidor de terceiros como os fornecidos pelo GMail ou Yahoo."
-
-msgid "Last Sent Voicemail Log"
-msgstr "Registro do Último Correio de Voz Enviado"
-
-msgid "Local Storage Directory"
-msgstr "Diretório de Armazenamento Local"
-
-msgid "No"
-msgstr "Não"
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr "Servidor de correio eletrônico (SMTP) para envio"
-
-msgid "SMTP Password"
-msgstr "Senha do SMTP"
-
-msgid "SMTP Port Number"
-msgstr "Porta do SMTP"
-
-msgid "SMTP Server Authentication"
-msgstr "Autenticação do Servidor SMTP"
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr "Nome do Equipamento ou Endereço IP do Servidor SMTP"
-
-msgid "SMTP User Name"
-msgstr "Nome do Usuário do SMTP"
-
-msgid "Secure Connection Using TLS"
-msgstr "Proteja a Conexão Usando TLS"
-
-msgid "Voicemail Setup"
-msgstr "Configuração do Correio de Voz"
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-"Quando você habilita o correio de voz, você terá a oportunidade de "
-"especificar endereços de correio eletrônio que recebem o correio de voz "
-"gravado. Você precisa também configurar um servidor SMTP abaixo."
-
-msgid "Yes"
-msgstr "Sim"
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-"Você pode também manter cópias das mensagens de correio de voz no "
-"dispositivo executando o seu PBX. O caminho especificado aqui será criado se "
-"ele não existe. Cuidado com espaço limitado em dispositivos embarcados, como "
-"roteadores, e habilite esta opção apenas se você sabe o que você está "
-"fazendo."
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
-"Sua senha real do SMTP não é mostrada para a sua proteção. Ela será alterada "
-"apenas quando você modificar o valor neste campo."
-
-#~ msgid "Directory to save voicemail into"
-#~ msgstr "Diretório para salvar o correio de voz"
-
-#~ msgid "Email addresses to forward to"
-#~ msgstr "Endereços de correio eletrônicos para encaminhar"
-
-#~ msgid "Enabled"
-#~ msgstr "Habilitado"
-
-#~ msgid ""
-#~ "Here you can configure a global voicemail for this PBX. Since this system "
-#~ "is intended to run on embedded systems like routers, there is no local "
-#~ "storage of voicemail - it must be sent out by email. Therefore you need "
-#~ "to configure an outgoing mail (SMTP) server (for example the SMTP server "
-#~ "your ISP provides, or GMail), and provide a list of addresses the "
-#~ "voicemail will be sent to."
-#~ msgstr ""
-#~ "Aqui você pode configurar um correio de voz global para este PBX. Uma vez "
-#~ "que este sistema é previsto para ser executado em ambientes embarcados "
-#~ "como roteadores, não existe armazenamento local do correio de voz - ele "
-#~ "deve ser enviado por correio eletrônico. Desta maneira, você deve "
-#~ "configurar um servidor (SMTP) de correio eletrônico (por exemplo, o "
-#~ "servidor SMTP do seu provedor de Internet, ou o do GMail), e fornecer uma "
-#~ "lista dos endereços para os quais o correio de voz será enviado."
-
-#~ msgid ""
-#~ "In order for this PBX to send emails containing voicemail recordings, you "
-#~ "need to set up an SMTP server here. Your ISP usually provides an SMTP "
-#~ "server for that purpose. You can also set up a GMail, Yahoo, or other 3rd "
-#~ "party SMTP server."
-#~ msgstr ""
-#~ "Para este PBX enviar mensagens eletrônicas contendo as gravações do "
-#~ "correio de voz, você precisa definir aqui um servidor SMTP. Seu provedor "
-#~ "de Internet geralmente fornece um servidor SMTP para este propósito. Você "
-#~ "também pode usar o servidor SMTP do GMail, Yahoo, ou outro de terceiros."
-
-#~ msgid "SMTP port number"
-#~ msgstr "Número da porta do SMTP"
-
-#~ msgid "SMTP server authentication"
-#~ msgstr "Autenticação do servidor SMTP"
-
-#~ msgid "SMTP server hostname or IP"
-#~ msgstr "Nome do equipamento ou endereço IP do servidor SMTP"
-
-#~ msgid "SMTP user name"
-#~ msgstr "Nome do usuário do SMTP"
-
-#~ msgid "Timeout before sending callers to voicemail"
-#~ msgstr "Tempo de espera antes de enviar chamadas para correio de voz"
-
-#~ msgid "Use TLS (secure connection)"
-#~ msgstr "Usar TLS (conexão segura)"
-
-#~ msgid ""
-#~ "When you enable voicemail, you will have the opportunity to specify email "
-#~ "addresses which receive the message. You must also set up an SMTP server "
-#~ "below."
-#~ msgstr ""
-#~ "Quando você habilita o correio de voz, você terá a oportunidade de "
-#~ "especificar endereços de correio eletrônio que recebem a mensagem. Você "
-#~ "também deve configurar um servidor SMTP abaixo."
diff --git a/po/pt_BR/pbx.po b/po/pt_BR/pbx.po
deleted file mode 100644
index ab77743..0000000
--- a/po/pt_BR/pbx.po
+++ /dev/null
@@ -1,653 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-11 04:03+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Configurações Avançadas"
-
-msgid "Available"
-msgstr "Disponível"
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-"Evite usar qualquer carácter que não seja um alfanumérico, espaço, vírgula "
-"ou ponto."
-
-msgid "Away"
-msgstr "Ausente"
-
-msgid "Blacklisted Numbers"
-msgstr "Números na Lista Negra"
-
-msgid "Call Routing"
-msgstr "Roteamento de Chamada"
-
-msgid "Call-through Numbers"
-msgstr "Números de Ligação Direta"
-
-msgid "Copy-paste large lists of numbers here."
-msgstr "Copie e cole aqui listas de números extensas."
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-"Números definidos que poderão realizar chamadas através deste sistema e "
-"quais privilégios o usuário terá."
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr "Disca números que não casam em qualquer lugar."
-
-msgid "Do Not Disturb"
-msgstr "Não Perturbe"
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr "Domínio/Endereço IP/Domínio Dinâmico"
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr "Lista Dinâmica dos Números da Lista Negra"
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr "Habilitar Chamadas Recebidas (Registrar pelo SIP)"
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr "Habilitar Chamadas Recebidas (defina o Estado abaixo)"
-
-msgid "Enable Outgoing Calls"
-msgstr "Habilitar Chamadas para Fora"
-
-msgid "Enabled"
-msgstr "Habilitado"
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-"Entre com os números de telefone que você deseja rejeitar automaticamente. "
-"Você pode omitir o código do país e qualquer zeros no início, mas, por "
-"favor, teste para ter certeza que você está bloqueando da área desejada com "
-"sucesso."
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-"Entre este endereço IP (ou IP:porta) na configuração de servidor/registrador "
-"dos seus dispositivos SIP que você irá usar SOMENTE localmente e nunca de um "
-"local remoto."
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-"Entre com o nome do equipamento (ou equipamento:porta) na configuração de "
-"servidor/Registrar do seus dispositivos SIP que você irá usar de um local "
-"remoto (eles também funcionarão localmente)."
-
-msgid "External SIP Port"
-msgstr "Porta SIP Externa"
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-"Para cada provedor habilitado para receber chamadas, aqui você pode "
-"restringir quais usuários tocarão quando receber chamadas. Se a lista "
-"estiver vazia, o sistema indicará que todos os usuários com recepção de "
-"chamadas habilitada tocarão. Nome de usuários inválidos serão rejeitados "
-"silenciosamente. Além disto, entrar com um nome de usuário aqui sobrescreve "
-"a configuração do usuário para não receber chamadas. Desta forma, você pode "
-"fazer com que alguns usuários toquem somente para alguns provedores "
-"específicos. As entradas podem ser inseridas usando uma lista separada por "
-"espaço ou um por nova linha."
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-"Para cada usuário habilitado para realizar chamadas externas, você pode "
-"restringir quais provedores o usuário poderá usar. Por padrão, todos os "
-"usuários podem usar todos os provedores. Para aparecer na lista abaixo, o "
-"usuário deve estar habilitado para realizar chamadas externas na página de "
-"\"Contas de Usuários\". Entre com os provedores de VoIP no formato "
-"usuário@algum.nome.de.equipamento, como listado em \"Chamadas Efetuadas\" "
-"abaixo. É mais fácil copiar e colar os provedores da lista abaixo. Entradas "
-"inválidas, includindo provedores não habilitados para chamadas externas, "
-"serão rejeitadas silenciosamente. As entradas podem ser inseridas usando uma "
-"lista separada por espaço ou um por nova linha."
-
-msgid "Full Name"
-msgstr "Nome Completo"
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "Google Accounts"
-msgstr "Contas do Google"
-
-msgid "Google Talk Status"
-msgstr "Estado do Google Talk"
-
-msgid "Google Talk Status Message"
-msgstr "Mensagem de Estado do Google Talk"
-
-msgid "Google Voice/Talk Accounts"
-msgstr "Contas do Google Voice/Talk"
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-"Aqui você deve configurar pelo menos uma conta SIP, que você irá usar para "
-"se cadastrar neste serviço. Use essa conta, seja em um adaptador de "
-"telefonia analógica (ATA), ou em um softphone SIP como Linphone, CSipSimple, "
-"ou Sipdroid em seu smartphone, ou o Ekiga, Linphone, ou X-Lite no seu "
-"computador. Por padrão, ao receber uma chamada em uma das suas contas nos "
-"provedores VoIP ou em números GV, todas as contas SIP tocarão "
-"simultaneamente."
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-"Se definir o servidor/registrador como %s ou %s não funcionar para você, "
-"tente defini-lo como %s ou %s e entre com este número de porta em um campo "
-"separado que especifica o número da porta do servidor/registrador. Fique "
-"ciente que alguns dispositivos têm uma configuração confusa que define a "
-"porta de origem das solicitações SIP no dispositivo SIP em si (a porta local "
-"no dispositivo). A porta especificada nesta página não é essa porta de "
-"ligação, mas a porta na qual o serviço escutará serviço."
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-"Se você sentir falhas ou alta latência enquanto baixa conteúdos pesados​​, "
-"você pode querer habilitar o <abbr title=\"Quality of Service, Qualidade de "
-"serviço\">QoS</abbr>. O <abbr title=\"Quality of Service, Qualidade de "
-"serviço\">QoS</abbr> prioriza o tráfego de e para a sua rede para endereços "
-"IP e portas específicas, resultando em melhor latência e redimento de som. "
-"Se ativado, será configurada automaticamente pelo PABX uma regra de <abbr "
-"title=\"Quality of Service, Qualidade de serviço\">QoS</abbr> para este "
-"serviço, mas você deve visitar a página de configuração de <abbr title="
-"\"Quality of Service, Qualidade de serviço\">QoS</abbr> (Rede -> QoS) para "
-"configurar outras configurações críticas de QoS como as velocidades da sua "
-"conexão."
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-"Se você tiver mais de uma conta que pode fazer chamadas externas, você deve "
-"informar uma lista de números de telefone e/ou prefixos nos seguintes campos "
-"para cada provedor listados. Prefixos inválidos são removidos "
-"silênciosamente, e some os caracteres 0-9, X, Z, N, # *,, e + são válidos. A "
-"letra X corresponde a 0-9, Z corresponde a 1-9, e N corresponde a 2-9. Por "
-"exemplo, para fazer chamadas para a Alemanha através de um provedor, você "
-"pode digitar 49. Para fazer chamadas para a América do Norte, você pode "
-"entrar 1NXXNXXXXXX. Se um de seus provedores pode fazer chamadas locais para "
-"um código de área como Nova York (646), você pode entrar com 646NXXXXXX para "
-"esse provedor. Você deve deixar uma conta com uma lista vazia para fazer "
-"chamadas com ele por padrão para o caso do prefixo não casar com nenhum "
-"outro fornecedor. O sistema irá substituir automaticamente uma lista vazia "
-"com uma mensagem que os este provedor será utilizado caso nenhuma das regras "
-"dos demais provedores casem. Seja tão específico quanto possível (isto é "
-"1NXXNXXXXXX é melhor do que 1). Por favor, note que todos os códigos de "
-"discagem internacionais são descartados (por exemplo 00, 011, 010, 0011). As "
-"entradas podem ser feitas em uma lista separada por espaços ou por nova "
-"linha."
-
-msgid "Incoming Calls"
-msgstr "Chamadas Recebidas"
-
-msgid "Insert QoS Rules"
-msgstr "Inserir Regras QoS"
-
-msgid "Makes Outgoing Calls"
-msgstr "Realiza Chamadas para Fora"
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr "NOTA: Não existe uma conta Google ou provedor SIP configurado."
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-"NOTA: Não existe uma conta Google ou provedor SIP habilitado para receber "
-"chamadas."
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-"NOTA: Não existe uma conta Google ou provedor SIP habilitado para efetuar "
-"chamadas externas."
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr "NOTA: Não existe uma conta local configurada."
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-"NOTA: Não existe uma conta local configurada para efetuar chamadas externas."
-
-msgid "No"
-msgstr "Não"
-
-msgid "Number of Seconds to Ring"
-msgstr "Número de Segundos para Tocar"
-
-msgid "Outbound Proxy"
-msgstr "Proxy Externo"
-
-msgid "Outgoing Calls"
-msgstr "Chamadas Efetuadas"
-
-msgid "PBX Main Page"
-msgstr "Página Principal do PBX"
-
-msgid "PBX Service Status"
-msgstr "Estado do Serviço PBX"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "Password"
-msgstr "Senha"
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-"Escolha um número de porta aleatória entre 6500 e 9500 para o serviço "
-"escutar. Não escolher o padrão 5060, porque é frequentemente alvo de ataques "
-"de força bruta. Quando terminar, (1) clique em \"Salvar e Aplicar\", e (2) "
-"clique no \"Reiniciar o serviço VoIP\" acima. Finalmente, (3) olhe na seção "
-"\"Contas de Dispositivos SIP/Telefones em Software\" para atualizar o "
-"endereço e porta do servidor para seu Dispositivos SIP/Telefones em Software."
-
-msgid "Port Setting for SIP Devices"
-msgstr "Configuração da Porta para Dispositivos SIP"
-
-msgid "Providers Used for Outgoing Calls"
-msgstr "Provedores Usados para as Chamadas para Fora"
-
-msgid "QoS Settings"
-msgstr "Configurações de QoS"
-
-msgid "RTP Port Range End"
-msgstr "Final da Faixa de Portas RTP"
-
-msgid "RTP Port Range Start"
-msgstr "Inicio da Faixa de Portas RTP"
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-"O tráfego RTP transporta de fato os pacotes de voz. Este é o início do "
-"intervalo de portas que será usado para a estabelecer uma comunicação RTP. "
-"Geralmente não é um problema deixar esta configuração com o valor padrão."
-
-msgid "Receives Incoming Calls"
-msgstr "Recebe Chamadas para Dentro"
-
-msgid "Remote Usage"
-msgstr "Uso Remoto"
-
-msgid "Rings users enabled for incoming calls"
-msgstr "Toca usuários habilitados para receber chamadas"
-
-msgid "SIP Accounts"
-msgstr "Contas SIP"
-
-msgid "SIP Device/Softphone Accounts"
-msgstr "Contas de Dispositivos SIP/Telefones em Software"
-
-msgid "SIP Provider Accounts"
-msgstr "Contas dos Provedores SIP"
-
-msgid "SIP Realm (needed by some providers)"
-msgstr "Domínio SIP (necessário para alguns provedores)"
-
-msgid "SIP Server/Registrar"
-msgstr "Servidor SIP/Registrador"
-
-msgid "SIP Server/Registrar Port"
-msgstr "Porta do Servidor SIP/Registrador"
-
-msgid "Server Setting"
-msgstr "Configuração do Servidor"
-
-msgid "Server Setting for Local SIP Devices"
-msgstr "Configuração do Servidor para Dispositivos SIP Locais"
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr "Configuração do Servidor para Dispositivos SIP Remotos"
-
-msgid "Service Status"
-msgstr "Estado do Serviço"
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-"Define o número de segundos para tocar o telefone ao receber chamadas antes "
-"de desligar ou ir para a caixa postal, se o correio de voz estiver instalado "
-"e habilitado."
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr "Números na Lista Negra separados por Espaço"
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-"Especifique os números individualmente aqui. Pressione o Enter para "
-"adicionar mais números."
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-"O número(s) acima especificados serão capazes de discar com os provedores "
-"deste usuário. Nomes inválidos, incluindo usuários não habilitados para "
-"chamadas externas, serão descartados silenciosamente. Por favor, verifique "
-"se a entrada foi aceita."
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-"Esta página de configuração permite configurar um sistema de serviço de "
-"telefone (PABX), que permite fazer chamadas telefônicas através do Google "
-"múltipla e SIP (como Sipgate, SipSorcery e Betamax) contas e compartilhá-los "
-"entre diversos dispositivos SIP. Note-se que as contas do Google, contas "
-"SIP, e contas de usuários locais são configurados em \"Contas do Google\", "
-"\"Contas SIP\" e \"Contas de Usuário\" sub-seções. Você deve adicionar pelo "
-"menos uma conta de usuário para este PABX e configurar um dispositivo SIP ou "
-"softphone para usar a conta, a fim de fazer e receber chamadas com o "
-"Google / SIP contas. Configurando vários usuários permitem que você faça "
-"chamadas gratuitas entre todos os usuários, e partilhar o Google configurado "
-"e contas SIP. Se você tem mais de um Google e contas SIP configurado, você "
-"provavelmente deve configurar como as chamadas de e para eles são "
-"encaminhados para a \"Call Routing\" página. Se você está interessado em "
-"usar o seu próprio PABX de qualquer lugar do mundo, então, visitar o "
-"\"Remote Uso\" na seção \"Advanced Settings\" página."
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-"Este é o nome que o servidor VoIP será usado para identificar-se quando se "
-"registrar para VoIP (SIP) fornecedores. Alguns provedores exigem isso para "
-"uma seqüência específica de correspondência de um dispositivo de hardware "
-"SIP."
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-"Este é o local onde você indica quais contas Google/SIP serão usadas para "
-"chamar quais códigos de área/país, que usuários poderão usar quais contas "
-"Google/SIP, como as chamadas recebidas serão roteadas, que números podem ser "
-"recebidos por este PBX com uma senha e qual números estão banidos."
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-"Este é o local onde você configura suas contas Google (Talk e Voice) para "
-"poder usá-las para realizar ou receber chamadas (conversa por voz e chamadas "
-"para telefones reais). Por favor, realize ao menos uma chamada de voz usando "
-"o plugin do Google Talk, instalável na interface do GMail. Após esta "
-"chamada, saia da sua conta em todos os serviços. Clique em \"Adicionar\" "
-"para adicionar quantas contas você desejar."
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-"Este é o local onde você configura suas contas SIP (VoIP) como Sipgate, "
-"SipSorcery, os populares provedores Betamax, e qualquer outro provedor com "
-"suporte a SIP para permitir o uso destas contas para efetuar e receber "
-"chamadas (URI de SIP e chamads para números reais). Clique em \"Adicionar\" "
-"para adicionar quantas contas você desejar."
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-"Esta opção deve estar definida como \"Sim\" se você tem um DDR (Discagem "
-"Direta a Ramal) associado com esta conta SIP or quer receber chamadas URI de "
-"SIP através deste provedor."
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-"Esta seção contém configurações que não precisam ser modificadas em "
-"condições normais. Aqui você pode configurar seu sistema para usar com "
-"dispositivos SIP remotos e resolver problemas com a qualidade das chamadas "
-"através da inserção de regras de <abbr title=\"Quality of Service, Qualidade "
-"de serviço\">QoS</abbr>."
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-"Use o nome de usuário numérico (4 a 5 dígitos) se você estiver conectando "
-"telefones normais com ATAs para este sistema (para que eles possam discar os "
-"nomes de seus usuários)."
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-"Use esta conta para realizar chamadas externas como configurado na seção de "
-"\"Roteamento de Chamada\"."
-
-msgid "Use this account to make outgoing calls."
-msgstr "Use esta conta para realizar chamadas externas."
-
-msgid "User Accounts"
-msgstr "Contas de Usuários"
-
-msgid "User Agent String"
-msgstr "Texto para o Agente do Usuário"
-
-msgid "User Name"
-msgstr "Nome do Usuário"
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr "Usa provedores habilitados para chamadas externas"
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-"Quando alguém iniciar uma conversa por voz com sua conta do GTalk ou chamar "
-"seu número GVoice (se você tiver uma conta Google Voice), a chamada será "
-"encaminhada para qualquer usuários que estão conectados (registados "
-"utilizando um dispositivo SIP ou softphone) e autorizados a receber a "
-"chamada. Se você tiver uma conta Google Voice, você deve ir para as "
-"configurações da sua conta GVoice e encaminhar as chamadas para o Google "
-"Chat, a fim de realmente receber chamadas feitas para o seu número GVoice. "
-"Se você tiver problemas para receber chamadas oriundas do GVoice, "
-"experimente a opção \"Call Screening/Monitoramento de Chamadas\" na "
-"configurações da sua conta GVoice. Finalmente, certifique-se de nenhum outro "
-"cliente está online com essa conta (navegador contado no GMail, aplicativo "
-"Google Talk no Desktop ou Celular), pois isto pode interferir."
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-"Quando a sua senha for salva, ela desaparece deste campo e não será exibida "
-"para sua proteção. A senha será alterada somente quando você informar uma "
-"nova senha diferente da que foi salva anteriormente."
-
-msgid "Yes"
-msgstr "Sim"
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-"Você pode digitar aqui o seu nome de domínio, endereço IP externo, ou nome "
-"de domínio dinâmico. Tenha em mente que se o seu endereço IP é dinâmico e "
-"ele mudar, a sua configuração se tornará inválida. Por isso, é recomendado "
-"configurar um DNS dinâmico neste caso."
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-"Você pode especificar um nome real para aparecer no identificador de "
-"chamadas."
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-"Você pode usar seus dispositivos SIP/softphones com este sistema a partir de "
-"um local remoto, desde que o seu provedor de Internet lhe forneça um "
-"endereço IP público. Você poderá ligar para outros usuários locais sem custo "
-"(por exemplo, outros adaptadores de telefone analógico (ATAs)) e usar seus "
-"provedores de VoIP para fazer chamadas como se fossem originadas do local do "
-"seu PBX. Depois de configurar esta aba, volte para onde os usuários são "
-"configurados e veja as novas configurações de servidor e porta com as quais "
-"você precisa configurar os seus dispositivos SIP remotos. Por favor, note "
-"que se este PABX não está rodando no seu roteador, você terá que configurar "
-"o redirecionamento de portas (NAT) no seu roteador. Por favor, encaminhe as "
-"portas abaixo (porta SIP e intervalo de porta RTP) para o endereço IP do "
-"dispositivo que executa este PBX."
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-"Seu PIN desaparece deste campo quando for salvo e não será exibido para sua "
-"proteção. Ele será alterada somente quando você informar um PIN diferente do "
-"que foi salvo anteriormente. É possível deixá-lo em branco mas fique atento "
-"quanto as implicações na segurança."
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-"Sua senha desaparece deste campo quando for salva e não será exibida para "
-"sua proteção. A senha será alterada somente quando você informar uma nova "
-"senha diferente da que foi salva anteriormente."
-
-#~ msgid "Account Status"
-#~ msgstr "Estado da Conta"
-
-#~ msgid "Account Status Message"
-#~ msgstr "Mensagem do Estado da Conta"
-
-#~ msgid "Domain Name/Dynamic Domain Name"
-#~ msgstr "Nome do Domínio/Nome do Domínio Dinâmico"
-
-#~ msgid "Enable Incoming Calls (See Status, Message below)"
-#~ msgstr "Habilitar Chamadas Recebidas (Veja o Estado, Mensagem abaixo)"
-
-#~ msgid "Service Control and Connection Status"
-#~ msgstr "Controle do Serviço e Estado da Conexão"
diff --git a/po/pt_BR/polipo.po b/po/pt_BR/polipo.po
deleted file mode 100644
index 881d5c0..0000000
--- a/po/pt_BR/polipo.po
+++ /dev/null
@@ -1,306 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-16 02:36+0200\n"
-"Last-Translator: Julio Cezar <jsilvestree@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "Opções Avançadas"
-
-msgid "Allowed clients"
-msgstr "Clientes permitidos"
-
-msgid "Always use system DNS resolver"
-msgstr "Sempre use o resolvedor de DNS do sistema"
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"A autenticação básica HTTP é suportada. Indique o usuário e senha no formato "
-"usuário:senha."
-
-msgid "Configuration"
-msgstr "Configuração"
-
-msgid "DNS and Query Settings"
-msgstr "Configurações de DNS e Consulta"
-
-msgid "DNS server address"
-msgstr "Endereço do servidor DNS"
-
-msgid "Delete cache files time"
-msgstr "Tempo para remoção dos arquivos de cache"
-
-msgid "Disk cache location"
-msgstr "Localização da cache em disco"
-
-msgid "Do not query IPv6"
-msgstr "Não consulte IPv6"
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Ativar se a cache (proxy) for compartilhada por múltiplos usuários."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Tamanho do primeiro segmento PMM (em bytes)"
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Quanta memória RAM deverá ser usada pelo Polipo para a sua cache."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "Tamanho da cache na RAM (bytes)"
-
-msgid "Listen address"
-msgstr "Endereço de escuta"
-
-msgid "Listen port"
-msgstr "Porta de escuta"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Local onde o polipo guardará permanentemente os arquivos de cache. É "
-"recomendada a utilização de dispositivos de armazenamento externo uma vez "
-"que o cache pode crescer consideravelmente. Deixe em branco para desativar a "
-"cache em disco."
-
-msgid "Log file location"
-msgstr "Localização do arquivo de registo"
-
-msgid "Log to syslog"
-msgstr "Registar para o syslog"
-
-msgid "Logging and RAM"
-msgstr "Registro e RAM"
-
-msgid "Never use system DNS resolver"
-msgstr "Nunca use o resolvedor de DNS do sistema"
-
-msgid "On-Disk Cache"
-msgstr "Cache em Disco"
-
-msgid "PMM segments size (in bytes)"
-msgstr "Tamanho do segmento PMM (em bytes)"
-
-msgid "Parent Proxy"
-msgstr "Porxy Superior"
-
-msgid "Parent proxy address"
-msgstr "Endereço do proxy superior"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Endereço do proxy superior (no formato host:porta), ao qual o Polipo irá "
-"encaminhar os seus pedidos."
-
-msgid "Parent proxy authentication"
-msgstr "Autenticação no proxy superior"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr "Estado do Polipo"
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "O polipo é um proxy web pequeno e rápido."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Multiplexagem simples"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"A multiplexagem simples (PMM) consiste na simulação de multiplexagem através "
-"da requisição de um pedido em múltiplos segmentos. O método tenta baixar a "
-"latência causada pela fraqueza do protocolo HTTP. Nota: alguns sites web não "
-"funcionam com a ativação de PMM."
-
-msgid "Port on which Polipo will listen"
-msgstr "Porta na qual o Polipo irá escutar"
-
-msgid "Proxy"
-msgstr "Proxy"
-
-msgid "Query DNS by hostname"
-msgstr "Consultar DNS pelo nome do equipamento"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-"Consulte o DNS diretamente. Alternativamente, use o resolvedor do sistema"
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-"Consulte o DNS diretamente. Para nomes desconhecidos, use o resolvedor do "
-"sistema"
-
-msgid "Query DNS for IPv6"
-msgstr "Consultar DNS para IPv6"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr "Consulta IPv4 e IPv6, prefere IPv4"
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr "Consulta IPv4 e IPv6, prefere IPv6"
-
-msgid "Query only IPv6"
-msgstr "Consulta somente IPv6"
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Define o endereço do servidor de DNS, caso pretenda que o polipo utilize um "
-"servidor DNS diferente do utilizado pelo sistema."
-
-msgid "Shared cache"
-msgstr "Cache compartilhada"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Tamanho do primeiro segmento PMM. Se não estiver definido, reverte para o "
-"dobro do tamanho do segmento PMM."
-
-msgid "Size to which cached files should be truncated"
-msgstr "Tamanho que os arquivos de cache serão truncados"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Syslog facility"
-msgstr "Categoria dos eventos Polipo no registo do sistema (syslog)"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"A interface na qual o Polipo será ativado. Para ativar em todas as "
-"interfaces, use 0.0.0.0 ou :: (IPv6)."
-
-msgid "Time after which cached files will be deleted"
-msgstr "Tempo máximo antes que um arquivo de cache seja apagado"
-
-msgid "Time after which cached files will be truncated"
-msgstr "Tempo máximo antes que um arquivo de cache seja truncado"
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-"Para habilitar o PMM, o tamanho do segmento PMM deve ser definido para algum "
-"valor positivo."
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Tamanho de truncagem dos arquivos de cache (em bytes)"
-
-msgid "Truncate cache files time"
-msgstr "Tempo de truncagem dos arquivos de cache"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"É recomendado o uso de armazenamento de externos pois o arquivo de registro "
-"é escrito frequentemente e pode crescer consideravelmente."
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-"Quando o endereço de escuta for definido como 0.0.0.0 ou :: (IPv6), é "
-"necessário listar quais clientes são permitidos. O formato é o endereço IP "
-"ou o endereço derede (192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 "
-"(IPv6))"
-
-msgid "enable"
-msgstr "habilitado"
-
-#~ msgid ""
-#~ "To enable polipo on-disk cache cleaning (highly recommended), you should "
-#~ "add a cron job in Scheduled Tasks services that will execute /usr/sbin/"
-#~ "polipo_purge script. For example to perform disk cache cleanup every day "
-#~ "at 6:00 in the morning you should add the following line in Scheduled "
-#~ "Tasks \"0 6 * * *\\t/usr/sbin/polipo_purge\" (without quotes)."
-#~ msgstr ""
-#~ "Para activar a limpeza de cache em disco (altamente recomendado), deve "
-#~ "acrescentar uma tarefa cron (\"Serviços\") que execute o script /usr/sbin/"
-#~ "polipo_purge. Como exemplo, para executar uma limpeza da cache "
-#~ "diariamente pelas 06H00 deve acrescentar a seguinte linha: \"0 6 * * * /"
-#~ "usr/sbin/polipo_purge\" (sem as aspas)."
-
-#~ msgid ""
-#~ "Size to which cached files should be truncated. (default value: 1048576)"
-#~ msgstr ""
-#~ "Tamanho com o qual devem ser trancados os ficheiros da cache. (valor pre-"
-#~ "definido: 1048576)"
-
-#~ msgid ""
-#~ "Time after which cached files will be truncated. (default value: 4d12h)"
-#~ msgstr ""
-#~ "Tempo após o qual os ficheiros de cache serão trancados. (valor pre-"
-#~ "definido: 4d12h)"
-
-#~ msgid "Time after which cached files will be deleted. (default value: 32d)"
-#~ msgstr ""
-#~ "Tempo apos o qual os ficheiros de cache serão removidos. (valor pré-"
-#~ "definido: 32d)"
-
-#~ msgid "General"
-#~ msgstr "Geral"
-
-#~ msgid ""
-#~ "When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-#~ "that are allowed to connect. The format is IP address or network address "
-#~ "(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-#~ msgstr ""
-#~ "Quando o endereço de listen fôr 0.0.0.0 (IPv4) ou :: (IPv6), deve listar "
-#~ "os clientes que tiverem permissão para ligação. O formato é endereço de "
-#~ "host ou endereço de rede (192.168.1.123, 192.168.1.0/24, "
-#~ "2001:660:116::/48 (IPv6))."
-
-#~ msgid ""
-#~ "false = Do not query IPv6; reluctantly = Query both, prefer IPv4; happily "
-#~ "= Query both, prefer IPv6; true = Query only IPv6"
-#~ msgstr ""
-#~ "false = Não pedir IPv6; reluctantly=Pedir ambos e preferir IPv4; "
-#~ "happily=Pedir ambos, preferir IPv6; true=Pedir apenas IPv6"
-
-#~ msgid ""
-#~ "false = Never use system DNS resolver; reluctantly = Query DNS directly, "
-#~ "if DNS server is unavailable fail to system DNS resolver; happily = Query "
-#~ "DNS directly, if host could not be found fallback to system DNS resolver; "
-#~ "true = Always use system DNS resolver"
-#~ msgstr ""
-#~ "false=nunca usar o resolver do sistema; reluctantly=pedir DNS "
-#~ "directamente, se o servidor DNS estiver indisponivel recorrer do resolver "
-#~ "DNS do sistema; happily=pedir DNS directamente, se o host nao for "
-#~ "encontrado, recorrer ao resolver DNS do sistema; true=Usar sempre o "
-#~ "resolver DNS do sistema"
-
-#~ msgid "Port on which Polipo will listen. (default value: 8123)"
-#~ msgstr "Porta local na qual o polipo será activado. (pre-definido: 8123)"
-
-#~ msgid "polipo_pmm_pmmsize_desc"
-#~ msgstr ""
-#~ "Para activar PMM, o tamanho do segmento PMM deve ser definido para um "
-#~ "qualquer valor positivo."
diff --git a/po/pt_BR/qos.po b/po/pt_BR/qos.po
deleted file mode 100644
index 7a036d9..0000000
--- a/po/pt_BR/qos.po
+++ /dev/null
@@ -1,123 +0,0 @@
-#  qos.po
-#  generated from ./applications/luci-qos/luasrc/i18n/qos.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-09-16 02:40+0200\n"
-"Last-Translator: Julio Cezar <jsilvestree@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "Calcular overhead"
-
-msgid "Classification Rules"
-msgstr "Classificação"
-
-msgid "Classification group"
-msgstr "Classificação"
-
-msgid "Destination host"
-msgstr "Endereço de destino"
-
-msgid "Downlink"
-msgstr "Link para download"
-
-msgid "Download speed (kbit/s)"
-msgstr "Velocidade de recebimento (kbit/s)"
-
-msgid "Enable"
-msgstr "Habilitado"
-
-msgid "Half-duplex"
-msgstr "Half-duplex"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Internet Connection"
-msgstr "Conexão com a Internet"
-
-msgid "Number of bytes"
-msgstr "Número de bytes"
-
-msgid "Ports"
-msgstr "Portas"
-
-msgid "Protocol"
-msgstr "Prococolo"
-
-msgid "QoS"
-msgstr "<abbr title=\"Quality of Service, Qualidade de serviço\">QoS</abbr>"
-
-msgid "Quality of Service"
-msgstr "Qualidade de Serviço"
-
-msgid "Service"
-msgstr "Serviço"
-
-msgid "Source host"
-msgstr "Endereço de origem"
-
-msgid "Target"
-msgstr "Alvo"
-
-msgid "Uplink"
-msgstr "Link para upload"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Velocidade de envio (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Com <abbr title=\"Quality of Service, Qualidade de serviço\">QoS</abbr>, "
-"você pode priorizar o tráfego da rede selecionada por endereços, portas ou "
-"serviços."
-
-msgid "all"
-msgstr "todos"
-
-msgid "allf"
-msgstr "allf"
-
-msgid "default"
-msgstr "padrão"
-
-msgid "express"
-msgstr "expressa"
-
-msgid "low"
-msgstr "baixa"
-
-msgid "normal"
-msgstr "normal"
-
-msgid "priority"
-msgstr "prioritário"
-
-msgid "qos_connbytes"
-msgstr "qos_connbytes"
-
-#~ msgid "Prioritization"
-#~ msgstr "Priorização"
-
-#~ msgid "source network / source host"
-#~ msgstr "rede de origem / host de origem"
-
-#~ msgid "target network / target host"
-#~ msgstr "rede de destino / host de destino"
-
-#~ msgid "portrange"
-#~ msgstr "faixa de portas"
-
-#~ msgid "Bytes sent"
-#~ msgstr "Bytes enviados"
diff --git a/po/pt_BR/radvd.po b/po/pt_BR/radvd.po
deleted file mode 100644
index 62c63bb..0000000
--- a/po/pt_BR/radvd.po
+++ /dev/null
@@ -1,469 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-17 23:13+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: German\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "6to4 interface"
-msgstr "Interface 6to4"
-
-msgid "Address"
-msgstr "Endereço"
-
-msgid "Addresses"
-msgstr "Endereços"
-
-msgid "Advanced"
-msgstr "Avançado"
-
-msgid "Advertise Home Agent flag"
-msgstr "Anuncie a opção de Agente Local"
-
-msgid "Advertise router address"
-msgstr "Anuncie o endereço do roteador"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Anuncie o Sufixo do Domínio"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"Anuncia IPv6 RDNSS. Se vazio, o endereço IPv6 atual da interface será usado"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Anuncie os prefixos IPv6"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Anuncie os prefixos IPv6. Se vazio, o prefixo da interface atual será usado"
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "Anuncia a capacidade de Agente Local para IPv6 Móvel (RFC3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr "Anuncia a capacidade de registro de Roteador Móvel (NEMO Básico)"
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-"Se especificado, anuncia no RA o tempo assumido de alcance dos vizinhos, em "
-"milissegundos. Especifique 0 para desabilita este anuncio"
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-"Anuncia no RA o valor padrão para a contagem de saltos nos pacotes unicast "
-"saindo da rede. Especifique 0 para desabilita este anuncio"
-
-msgid "Advertises the default router preference"
-msgstr "Anuncia a preferência do roteador padrão"
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-"Anuncia no RA o MTU da conexão. Especifique 0 para desabilita este anuncio"
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-"Divulga a duração do tempo em segundos que endereços gerados a partir do "
-"prefixo através apátridas endereço autoconfiguração permanecem preferido."
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-"Divulga a duração do tempo em segundos que o prefixo é válido para o "
-"propósito de sobre-link determinado."
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-"Anuncia o período de tempo, em segundos, da validade do roteador padrão. "
-"Especifique 0 para período infinito"
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-"Anuncia o período de tempo, em segundos, que o roteador está oferecendo o "
-"serviço de Agente Local para IPv6 Móvel"
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-"Anuncia o tempo de espera, em milissegundos, entre mensagens de Solicitação "
-"de Vizinhos no RA. Especifique 0 para desabilitar a retransmissão do anúncio"
-
-msgid "Advertising"
-msgstr "Anúncio"
-
-msgid "Autonomous"
-msgstr "Autônomo"
-
-msgid "Clients"
-msgstr "Clientes"
-
-msgid "Configuration flag"
-msgstr "Marcação de configuração"
-
-msgid "Current hop limit"
-msgstr "Limite de saltos atual"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "Configuração DNSSL"
-
-msgid "Default lifetime"
-msgstr "Validade padrão"
-
-msgid "Default preference"
-msgstr "Preferências padrão"
-
-msgid "Enable"
-msgstr "Habilita"
-
-msgid "Enable advertisements"
-msgstr "Habilita anúncios"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "Habilita as solicitações e os anúncios do roteador"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-"Habilita o protoloco de autoconfiguração administrada com estado (RFC2462)"
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-"Habilita a autoconfiguração de informação adicional, não endereço (RFC2462)"
-
-msgid "General"
-msgstr "Geral"
-
-msgid "Home Agent information"
-msgstr "Informação do Agente Local"
-
-msgid "Home Agent lifetime"
-msgstr "Validade do Agente Local"
-
-msgid "Home Agent preference"
-msgstr "Preferências do Agente Local"
-
-msgid "Include Home Agent Information in the RA"
-msgstr "Inclui Informação do Agente Local no RA"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr "Inclui a opção de Intervalo de Anúncio de IPv6 Móvel no RA"
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr "Inclui o endereço da camada de rede da interface de saída no RA"
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-"Indica que o endereço da interface é enviado ao invés do prefixo de rede, "
-"como é necessário para IPv6 Móvel"
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-"Indica que a conexão abaixo não é capaz de utilizar broadcast. Isto inibe o "
-"envio de anúncios não solicitados"
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-"Indica que este prefixo pode ser usado para configuração autônoma de "
-"endereços (RFC4862)"
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-"Indica que este prefixo pode ser usado para a determinação da presença no "
-"enlace local (RFC4861)"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Interface Configuration"
-msgstr "Configuração da Interface"
-
-msgid "Interface required"
-msgstr "Requer uma interface"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Lifetime"
-msgstr "Validade"
-
-msgid "Link MTU"
-msgstr "MTU da conexão"
-
-msgid "Managed flag"
-msgstr "Marcação de gerenciado"
-
-msgid "Max. interval"
-msgstr "Intervalo Máximo"
-
-msgid "Maximum advertisement interval"
-msgstr "Intervalo máximo de anúncio"
-
-msgid "Minimum advertisement delay"
-msgstr "Atraso mínimo de anúncio"
-
-msgid "Minimum advertisement interval"
-msgstr "Intervalo mínimo de anúncio"
-
-msgid "Mobile IPv6"
-msgstr "IPv6 Móvel"
-
-msgid "Mobile IPv6 interval option"
-msgstr "Opçao de intervalo de IPv6 móvel"
-
-msgid "Mobile IPv6 router registration"
-msgstr "Registro de roteador IPv6 móvel"
-
-msgid "Multicast"
-msgstr "Multicast"
-
-msgid "On-link"
-msgstr "Presença no enlace local"
-
-msgid "On-link determination"
-msgstr "Determinação da presença no enlace local"
-
-msgid "Preference"
-msgstr "Preferência"
-
-msgid "Preferred lifetime"
-msgstr "Validade preferida"
-
-msgid "Prefix"
-msgstr "Prefixo"
-
-msgid "Prefix Configuration"
-msgstr "Configuração do Prefixo"
-
-msgid "Prefixes"
-msgstr "Prefixos"
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr "Configuração do RDNSS"
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr "Radvd - DNSSL"
-
-msgid "Radvd - Interface %q"
-msgstr "Radvd - Interface %q"
-
-msgid "Radvd - Prefix"
-msgstr "advd - Prefixo"
-
-msgid "Radvd - RDNSS"
-msgstr "Radvd - RDNSS"
-
-msgid "Radvd - Route"
-msgstr "Radvd - Rota"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-"Radvd é um programa de anúncio de rotas para IPv6. Ele escuta por "
-"solicitações de rota e envia anúncios de roteador (RA) como descrito em RFC "
-"4861."
-
-msgid "Reachable time"
-msgstr "Tempo de alcance"
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-"Restringe a comnuicação para clientes específicos. Deixe vazio para usar "
-"multicast"
-
-msgid "Retransmit timer"
-msgstr "Cronômetro de retransmissão"
-
-msgid "Route Configuration"
-msgstr "Configuração da Rota"
-
-msgid "Routes"
-msgstr "Rotas"
-
-msgid "Source link-layer address"
-msgstr "Endereço de origem da camada de enlace"
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-"Especifica o nome da interface lógica da qual será derivada o prefixo 6to4. "
-"O endereço IPv4 público da interface é combinado com 2002::/3 e o valor da "
-"opção de prefixo"
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr "Especifica o tempo de vida associado com o trajecto em segundos."
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr "Especifica o nome da interface lógica que esta seção pertence"
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-"Especifica a duração máxima de quanto tempo as entradas DNSSL são usados ​​"
-"para resolução de nomes."
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-"Especifica a duração máxima de quanto tempo as entradas RDNSS são usados ​​"
-"para resolução de nomes."
-
-msgid "Specifies the preference associated with the default router"
-msgstr "Especifica as preferências associadas com o roteador padrão"
-
-msgid "Suffix"
-msgstr "Sufixo"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"O tempo máximo, em segundos, permitido entre o envio de RAs não solicitados "
-"a partir desta interface"
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-"O tempo mínimo, em segundos, permitido entre o envio de RAs a partir desta "
-"interface"
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"O tempo mínimo, em segundos, permitido entre o envio de RAs não solicitados "
-"a partir desta interface"
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr "As preferencias para o Agente Local enviando este RA"
-
-msgid "Timing"
-msgstr "Cronometragem"
-
-msgid "Unicast only"
-msgstr "Somente Unicast"
-
-msgid "Valid lifetime"
-msgstr "Duração da validade"
-
-msgid "Validity time"
-msgstr "Tempo de validade"
-
-msgid "default"
-msgstr "padrão"
-
-msgid "high"
-msgstr "alto"
-
-msgid "low"
-msgstr "baixo"
-
-msgid "medium"
-msgstr "médio"
-
-msgid "no"
-msgstr "não"
-
-msgid "yes"
-msgstr "sim"
-
-#~ msgid "Advertised IPv6 prefix"
-#~ msgstr "Anuncie o prefixo IPv6"
-
-#~ msgid ""
-#~ "Advertised IPv6 prefix. If empty, the current interface prefix is used"
-#~ msgstr ""
-#~ "Anuncie o prefixo IPv6. Se vazio, o prefixo da interface atual será usado"
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that addresses generated from "
-#~ "the prefix via stateless address autoconfiguration remain preferred. Use "
-#~ "0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Anuncia o período de tempo, em segundos, que endereços gerados a partir "
-#~ "do prefixo através da autoconfiguração de endereço sem estado terão "
-#~ "preferência. Especifique 0 para período infinito"
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that the prefix is valid for the "
-#~ "purpose of on-link determination. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Anuncia o período de tempo, em segundos, que o prefixo é valido para o "
-#~ "propósito de determinação da presença no enlace local. Especifique 0 para "
-#~ "período infinito"
-
-#~ msgid ""
-#~ "Indicates whether that RDNSS continues to be available to hosts even if "
-#~ "they moved to a different subnet"
-#~ msgstr ""
-#~ "Indica se o RDNSS continuará a estar disponível mesmo se o cliente for "
-#~ "movido para uma subrede diferente"
-
-#~ msgid "Open"
-#~ msgstr "Abrir"
-
-#~ msgid ""
-#~ "Specifies the lifetime associated with the route in seconds. Use 0 to "
-#~ "specify an infinite lifetime"
-#~ msgstr "Especifica a validade da rota em segundos. Utilize 0 para infinita"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the DNSSL entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Especifica a validade da entrada DNSSL para a resolução de nomes. Utilize "
-#~ "0 para duração infinita"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the RDNSS entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Especifica a validade da entrada RDNS para a resolução de nomes. Utilize "
-#~ "0 para duração infinita"
diff --git a/po/pt_BR/rrdtool.po b/po/pt_BR/rrdtool.po
deleted file mode 100644
index 510b4a8..0000000
--- a/po/pt_BR/rrdtool.po
+++ /dev/null
@@ -1,359 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2011-10-11 21:17+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Wireless - Relação Sinal/Ruido"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "dBm"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Nivel de Ruído"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Força do Sinal"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Wireless - Qualidade do Sinal"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Qualidade do Sinal"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: Tempo de resposta ICMP"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "ms"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Firewall - Pacotes Processados"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "Pacote/s"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "Cadeia \"%di\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - Transferência na %pi"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "Bytes/s"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Bytes (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - Pacotes na %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "Packets/s"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Processado (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Descartados (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Erros      (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - Multicast na %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "Pacote/s"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Pacotes"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - Colisões na %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "Colisão(es)"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Colisões"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - Erros na %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "Erro/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Processos"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Processo/s"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Processo %pi - tempo usado da cpu"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffies"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "sistema"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "usuário"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Processo %pi - threads e processos"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "Contagem"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Processo %pi - pagina de erros"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Pagina de erros"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "pagina de erros"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Processo %pi - tamanho da memória virtual"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Bytes"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "memória virtual"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Usado no Processado #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Transferência na %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "Bytes/s"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Pacotes na %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "Pacote/s"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: Ligações TCP na Porta %pi"
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "Ligação(ões)"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Utilização de Espaço em Disco em %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Bytes"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: Interrupções"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "Erro/s"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: Carga do Sistema"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Carga"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 min"
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 min"
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 min"
diff --git a/po/pt_BR/samba.po b/po/pt_BR/samba.po
deleted file mode 100644
index 07afc58..0000000
--- a/po/pt_BR/samba.po
+++ /dev/null
@@ -1,93 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2011-10-11 21:03+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Permitir convidados"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Usuários do sistema poderão acessar seu diretório home através dos "
-"compartilhamentos de rede"
-
-msgid "Allowed users"
-msgstr "Usuários permitidos"
-
-msgid "Create mask"
-msgstr "Máscara de criação"
-
-msgid "Description"
-msgstr "Descrição"
-
-msgid "Directory mask"
-msgstr "Máscara do diretório"
-
-msgid "Edit Template"
-msgstr "Editar modelo"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Edita o modelo que é usado para gerar a configuração do samba."
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "Hostname"
-msgstr "Nome do computador"
-
-msgid "Mask for new directories"
-msgstr "Máscara para novos diretórios"
-
-msgid "Mask for new files"
-msgstr "Máscara para novos arquivos"
-
-msgid "Name"
-msgstr "Nome"
-
-msgid "Network Shares"
-msgstr "Compartilhamentos de Rede"
-
-msgid "Path"
-msgstr "Caminho"
-
-msgid "Read-only"
-msgstr "Somente leitura"
-
-msgid "Share home-directories"
-msgstr "Compartilhar diretórios home"
-
-msgid "Shared Directories"
-msgstr "Diretórios Compartilhados"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Este é o conteúdo do arquivo '/etc/samba/smb.conf.template' a partir do qual "
-"sua configuração do samba será gerada. Valores entre simbolos de pipe ('|') "
-"não devem ser alterados. Estes valores serão obtidos a partir da aba "
-"'Configurações Gerais'."
-
-msgid "Workgroup"
-msgstr "Grupo de trabalho"
-
-#~ msgid "Shared Directory"
-#~ msgstr "Diretório Compartilhado"
-
-#~ msgid "Physical Path"
-#~ msgstr "Caminho Físico"
-
-#~ msgid "optional"
-#~ msgstr "opcional"
diff --git a/po/pt_BR/splash.po b/po/pt_BR/splash.po
deleted file mode 100644
index f5dad1d..0000000
--- a/po/pt_BR/splash.po
+++ /dev/null
@@ -1,369 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-11-02 05:36+0200\n"
-"PO-Revision-Date: 2012-02-24 22:45+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Accept"
-msgstr "Aceitar"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-"O acesso à internet, no entanto, pode ser possível porque alguns ativistas "
-"deste projeto compartilham duas conexões privadas com a internet. Estas "
-"poucas conexões são compartilhadas entre todos os usuários. Isto significa "
-"que a banda disponível é limitada e, por este motivo, pedimos que você não "
-"faça qualquer uma destas coisas:"
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "Clientes Ativos"
-
-msgid "Allowed hosts/subnets"
-msgstr "Subredes/equipamentos permitidos"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"O limite da taxa de transferência somente é ativado quando ambos os limites, "
-"para subir e baixar, estão definidos. Use o valor 0 para desabilitar "
-"completamente esta limitação. Clientes na lista branca não são limitados."
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-"Torne-se um membro ativo desta comunidade e ajude operando seu próprio nó."
-
-msgid "Blacklist"
-msgstr "Lista negra"
-
-msgid "Blocked"
-msgstr "Bloqueado"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr "Tempo de eliminação"
-
-msgid "Client-Splash"
-msgstr "Client-Splash"
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-"Client-Splash é um sistema de autenticação de ponto de acesso para redes sem "
-"fio em malha."
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-"A velocidade para baixar dos clientes é limitada por este valor (kbytes/s)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-"Os clientes que aceitarem o termo de uso estarão autorizados a usar a rede "
-"por esta quantidade de horas."
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-"A velocidade para subir dos clientes é limitada por este valor (kbytes/s)"
-
-msgid "Contact"
-msgstr "Contato"
-
-msgid "Decline"
-msgstr "Rejeitar"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr "Doar algum dinheiro para ajudar a manter este projeto vivo."
-
-msgid "Download limit"
-msgstr "Limite para baixar"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr "Zona do Firewall"
-
-msgid "General"
-msgstr "Geral"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "Nome do Equipamento"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-"Equipamentos ou Redes listadas aqui estarão excluídas do termo de uso. Eles "
-"estarão sempre autorizados."
-
-msgid "IP Address"
-msgstr "Endereço IP"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-"Se você opera seu próprio equipamento WiFi, use canais diferentes dos nossos."
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr "Se você usa esta rede regularmente, nós pedimos a sua ajuda:"
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr "Interceptar o tráfego do cliente nesta interface"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interfaces that are used for Splash."
-msgstr "Interfaces usadas pelo Splash."
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-"KB/s (Baixando/Subindo). Você pode remover esta limitação contribuindo "
-"ativamente para este projeto."
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "Endereço MAC"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "Os endereços MAC nesta lista serão bloqueados."
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-"Endereços MAC dos clientes na lista branca. Estes não precisam aceitar o "
-"termo de uso e não possuem limitação na sua taxa de transferência."
-
-msgid "Netmask"
-msgstr "Máscara de Rede"
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "No clients connected"
-msgstr "Nenhum cliente conectado"
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-"Observe que nós não somos um provedor de internet mas uma rede comunitária "
-"experimental."
-
-msgid "Policy"
-msgstr "Política"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Salvar"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr "As regras do Slapsh estão integradas a esta zona do firewall"
-
-msgid "Splashtext"
-msgstr "Texto do termo de uso"
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "Tempo restante"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-"Para perguntar por qual razão você foi bloqueado ou para solicitar novamente "
-"seu acesso, você pode tentar contatar o dono deste ponto de acesso:"
-
-msgid "Traffic in/out"
-msgstr "Tráfego de entrada/saída"
-
-msgid "Upload limit"
-msgstr "Limite de subida"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr "Bem-vindo"
-
-msgid "Whitelist"
-msgstr "Lista branca"
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr "Você está agora conectado à rede livre em malha sem fio"
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-"Vocẽ pode entrar aqui com seu próprio texto que será mostrado para os "
-"clientes.<br />É possível usar os seguintes marcadores: ###COMMUNITY###, "
-"###COMMUNITY_URL###, ###CONTACTURL###, ###LEASETIME###, ###LIMIT### and "
-"###ACCEPT###."
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-"Seu acesso para esta rede foi bloqueado, provavelmente porque você fez algo "
-"que as regras explicitamente proibiam."
-
-msgid "Your bandwidth is limited to"
-msgstr "Sua banda está limitada à"
-
-msgid "blacklisted"
-msgstr "na lista negra"
-
-msgid "expired"
-msgstr "expirado"
-
-msgid "optional when using host addresses"
-msgstr "opcional quando é usado o endereço do equipamento"
-
-msgid "perform any kind of illegal activities"
-msgstr "realizar qualquer tipo de atividades ilegais"
-
-msgid "splashed"
-msgstr "termo mostrado"
-
-msgid "temporarily blocked"
-msgstr "bloqueado temporariamente"
-
-msgid "unknown"
-msgstr "desconhecido"
-
-msgid "use filesharing applications on this network"
-msgstr "usar aplicativos de compartilhamento de arquivos nesta rede"
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr "usar banda com fluxos ou arquivos baixados não necessários"
-
-msgid "whitelisted"
-msgstr "na lista branca"
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "Aceitando estas regras, você pode usar esta rede para"
-
-#~ msgid "Edit Splash text"
-#~ msgstr "Editar texto do termo de uso"
-
-#~ msgid "hour(s). After this time you need to accept these rules again."
-#~ msgstr ""
-#~ "horas(s). Depois deste tempo, você terá que aceitar as regras novamente."
-
-#~ msgid "the owner of this access point."
-#~ msgstr "o dono deste ponto de acesso."
-
-#~ msgid ""
-#~ "You can change the text that is displayed to clients here.<br /> It is "
-#~ "possible to use the following markers: ###COMMUNITY###, "
-#~ "###COMMUNITY_URL###, ###LEASETIME### and ###ACCEPT###.<br />Click here to "
-#~ "<a href='/luci/splash/'>test the splash page</a> after you saved it."
-#~ msgstr ""
-#~ "Aqui você pode mudar o texto do termo de uso que é mostrado aos clientes."
-#~ "<br /> É possível usar as seguintes marcações: ###COMMUNITY###, "
-#~ "###COMMUNITY_URL###, ###LEASETIME### e ###ACCEPT###.<br />Clique aqui "
-#~ "para <a href='/luci/splash/'>testar a página de termo de uso</a> depois "
-#~ "que você salvá-la."
diff --git a/po/pt_BR/statistics.po b/po/pt_BR/statistics.po
deleted file mode 100644
index 1932c9c..0000000
--- a/po/pt_BR/statistics.po
+++ /dev/null
@@ -1,706 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-11-11 04:02+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Action (target)"
-msgstr "Ação (destino)"
-
-msgid "Add command for reading values"
-msgstr "Adicionar comando para leitura de valores"
-
-msgid "Add matching rule"
-msgstr "Adicionar regra"
-
-msgid "Add multiple hosts separated by space."
-msgstr "Adicione múltiplos equipamentos separados por espaço."
-
-msgid "Add notification command"
-msgstr "Adicionar o comando de notificação"
-
-msgid "Base Directory"
-msgstr "Diretório Base"
-
-msgid "Basic monitoring"
-msgstr "Monitoramento básico"
-
-msgid "CPU Plugin Configuration"
-msgstr "Configuração do plugin CPU"
-
-msgid "CSV Output"
-msgstr "Formato CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Configuração do plugin CSV"
-
-msgid "Cache collected data for"
-msgstr "Cache dos dados coletados"
-
-msgid "Cache flush interval"
-msgstr "Intervalo de limpeza do cache"
-
-msgid "Chain"
-msgstr "Cadeia"
-
-msgid "CollectLinks"
-msgstr "Coleção de Links"
-
-msgid "CollectRoutes"
-msgstr "Coleção de Rotas"
-
-msgid "CollectTopology"
-msgstr "Coleção de Topologias"
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Configurações do Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd é um pequeno daemon que coleta dados de várias fontes através de "
-"diferentes plugins. Nesta página você pode alterar as configurações gerais "
-"do daemon collectd."
-
-msgid "Conntrack"
-msgstr "Conntrack"
-
-msgid "Conntrack Plugin Configuration"
-msgstr "Configuração do Plugin do Conntrack"
-
-msgid "DF Plugin Configuration"
-msgstr "Configuração do plugin DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Configuração do plugin DNS"
-
-msgid "Data collection interval"
-msgstr "Intervalo da coleta de dados"
-
-msgid "Datasets definition file"
-msgstr "Arquivo com a definição de dados"
-
-msgid "Destination ip range"
-msgstr "Faixa IP de destino"
-
-msgid "Directory for collectd plugins"
-msgstr "Diretório para os plugins do collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Diretório para sub-configurações"
-
-msgid "Disk Plugin Configuration"
-msgstr "Configuração do plugin Disco"
-
-msgid "Disk Space Usage"
-msgstr "Utilização de espaço em disco"
-
-msgid "Disk Usage"
-msgstr "Utilização do Disco"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Mostrar intervalo »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Configuração do plugin E-Mail"
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable this plugin"
-msgstr "Habilitar este plugin"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Configuração do plugin Exec"
-
-msgid "Filter class monitoring"
-msgstr "Monitoramento das Classes de Filtros"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr "Limpar cache após"
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-"Encaminhamento entre o endereço de escuta e os endereços dos servidores"
-
-msgid "Graphs"
-msgstr "Gráficos"
-
-msgid "Group"
-msgstr "Grupo"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Aqui você pode definir comandos externos que serão iniciados pelo collectd a "
-"fim de ler determinados valores. Os valores serão lidos a partir do stdout."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Aqui você pode definir os comandos externos que serão iniciados pelo "
-"collectd quando determinados valores limite forem atingidos. Os valores "
-"passados ao comando serão enviados para o stdin."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Aqui você pode definir diversos critérios para as regras iptables "
-"selecionadas serem monitoradas."
-
-msgid "Host"
-msgstr "Equipamento"
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr "Endereço IP ou nome do equipamento de onde obter a saída do txtinfo"
-
-msgid "IRQ Plugin Configuration"
-msgstr "Configuração do plugin IRQ"
-
-msgid "Ignore source addresses"
-msgstr "Ignorar endereços de origem"
-
-msgid "Incoming interface"
-msgstr "Interface de entrada"
-
-msgid "Interface Plugin Configuration"
-msgstr "Configuração do plugin Interface"
-
-msgid "Interfaces"
-msgstr "Interfaces"
-
-msgid "Interrupts"
-msgstr "Interrupções"
-
-msgid "Interval for pings"
-msgstr "Intervalo para pings"
-
-msgid "Iptables Plugin Configuration"
-msgstr "Configuração do plugin Iptables"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-"Deixe não selecionado para determinar automaticamente a interface a ser "
-"monitorada"
-
-msgid "Listen host"
-msgstr "Endereço de escuta do Host"
-
-msgid "Listen port"
-msgstr "Porta de escuta"
-
-msgid "Listener interfaces"
-msgstr "Escutar na(s) interface(s)"
-
-msgid "Load Plugin Configuration"
-msgstr "Configuração do plugin carga"
-
-msgid "Maximum allowed connections"
-msgstr "Máximo de conexões permitidas"
-
-msgid "Memory"
-msgstr "Memória"
-
-msgid "Memory Plugin Configuration"
-msgstr "Configuração do Plugin da Memória"
-
-msgid "Monitor all except specified"
-msgstr "Monitore tudo exceto se especificado"
-
-msgid "Monitor all local listen ports"
-msgstr "Monitorar todas as portas locais"
-
-msgid "Monitor devices"
-msgstr "Monitorar dispositivos"
-
-msgid "Monitor disks and partitions"
-msgstr "Monitoras discos e partições"
-
-msgid "Monitor filesystem types"
-msgstr "Monitorar tipos de sistemas de arquivos"
-
-msgid "Monitor hosts"
-msgstr "Monitorar os equipamentos"
-
-msgid "Monitor interfaces"
-msgstr "Monitorar interfaces"
-
-msgid "Monitor interrupts"
-msgstr "Monitorar interrupções"
-
-msgid "Monitor local ports"
-msgstr "Monitorar as portas locais"
-
-msgid "Monitor mount points"
-msgstr "Monitorar pontos de montagem"
-
-msgid "Monitor processes"
-msgstr "Monitorar processos"
-
-msgid "Monitor remote ports"
-msgstr "Monitorar portas remotas"
-
-msgid "Name of the rule"
-msgstr "Nome da regra"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Configuração do plugin Netlink"
-
-msgid "Network"
-msgstr "Rede"
-
-msgid "Network Plugin Configuration"
-msgstr "Configuração do plugin Rede"
-
-msgid "Network plugins"
-msgstr "Plugins de rede"
-
-msgid "Network protocol"
-msgstr "Protocolo de rede"
-
-msgid "Number of threads for data collection"
-msgstr "Número de threads para o coletor de dados"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr "Configuração do Plugin OLSRd"
-
-msgid "Only create average RRAs"
-msgstr "Somente criar RRAs de média"
-
-msgid "Options"
-msgstr "Opções"
-
-msgid "Outgoing interface"
-msgstr "Interface de saída"
-
-msgid "Output plugins"
-msgstr "Plugins de saída"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Configuração do plugin Ping"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Processes"
-msgstr "Processos"
-
-msgid "Processes Plugin Configuration"
-msgstr "Configuração do plugin Processos"
-
-msgid "Processes to monitor separated by space"
-msgstr "Processos para monitorar, separado por espaços"
-
-msgid "Processor"
-msgstr "Processador"
-
-msgid "Qdisc monitoring"
-msgstr "Monitoramento do Qdisc"
-
-msgid "RRD XFiles Factor"
-msgstr "Fator RRD XFiles"
-
-msgid "RRD heart beat interval"
-msgstr "Intervalo entre duas atualizações"
-
-msgid "RRD step interval"
-msgstr "Intervalo de atualização"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Configuração do plugin RRDTool"
-
-msgid "Rows per RRA"
-msgstr "Linhas por RRA"
-
-msgid "Script"
-msgstr "Script"
-
-msgid "Seconds"
-msgstr "Segundos"
-
-msgid "Server host"
-msgstr "Endereço do servidor"
-
-msgid "Server port"
-msgstr "Porta do servidor"
-
-msgid "Shaping class monitoring"
-msgstr "Monitoramento das Classes de Shaping"
-
-msgid "Socket file"
-msgstr "Arquivo do socket"
-
-msgid "Socket group"
-msgstr "Grupo do socket"
-
-msgid "Socket permissions"
-msgstr "Permissões do socket"
-
-msgid "Source ip range"
-msgstr "Faixa de IP de origem"
-
-msgid "Specifies what information to collect about links."
-msgstr "Especifica quais informações serão coletadas sobre os enlaces."
-
-msgid "Specifies what information to collect about routes."
-msgstr "Especifica quais informações serão coletadas sobre as rotas."
-
-msgid "Specifies what information to collect about the global topology."
-msgstr "Especifica quais informações serão coletadas sobre a topologia global."
-
-msgid "Statistics"
-msgstr "Estatística"
-
-msgid "Storage directory"
-msgstr "Diretório de armazenamento"
-
-msgid "Storage directory for the csv files"
-msgstr "Diretório para armazenamento dos arquivos csv"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Armazenar os valores dos dados como taxas em vez de valores absolutos"
-
-msgid "Stored timespans"
-msgstr "Intervalos armazenados"
-
-msgid "System Load"
-msgstr "Carga do Sistema"
-
-msgid "System plugins"
-msgstr "Plugins de sistema"
-
-msgid "TCP Connections"
-msgstr "Conexões TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Configuração do plugin TCPConns"
-
-msgid "TTL for network packets"
-msgstr "TTL para os pacotes de rede"
-
-msgid "TTL for ping packets"
-msgstr "TTL para os pacotes do ping"
-
-msgid "Table"
-msgstr "Tabela"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-"O plugin OLSRd lê informações sobre redes em malha (mesh) a partir do plugin "
-"txtinfo do OLSRd."
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-"O plugin do conntrack coleta estatísticas sobre o número de conexões "
-"rastreadas."
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-"O plugin cpu coleta as estatísticas básicas sobre o uso do processador."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"O plugin csv armazena os dados coletados em um arquivo no formato csv para "
-"um futuro processamento por outros programas."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"O plugin df coleta estatísticas sobre a utilização de espaço em disco em "
-"diferentes dispositivos, pontos de montagem ou tipos de sistemas de arquivos."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"O plugin disco coleta estatísticas de uso detalhadas das partições "
-"selecionadas ou discos inteiros."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"O plugin dns coleta estatísticas detalhadas sobre o tráfego do dns nas "
-"interfaces selecionadas."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"O plugin de email cria um socket unix que pode ser usado para transmitir "
-"estatísticas de email para o collectd. Este plugin é essencialmente "
-"destinado a ser utilizado em conjunto com o plugin Mail::SpamAssasin::"
-"Plugin::Collectd mas pode ser utilizado de outras maneiras também."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"O plugin exec inicia comandos externos para leitura de valores ou notificar "
-"processos externos quando um determinado valor limite for atingido."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"O plugin interface plugin coleta estatísticas sobre o tráfego das interfaces "
-"selecionadas."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"O plugin iptables irá monitorar as regras de firewall selecionadas e coletar "
-"informações sobre pacotes e bytes processados pela regra."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"O plugin irq irá monitorar a taxa de ocorrências por segundo de cada "
-"interrupção selecionada. Se nenhuma interrupção for selecionada então todas "
-"as interrupções serão monitoradas."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-"O plugin iwinfo coleta estatísticas sobre a força, ruído e qualidade do "
-"sinal da rede sem fio."
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "O plugin de carga coleta estatísticas gerais sobre a carga do sistema."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr "O plugin de memória coleta estatísticas sobre o uso da memória."
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"O plugin Netlink coleta informações detalhadas como qdisc-, classe- e "
-"estatísticas de filtro das interfaces selecionadas."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"O plugin rede fornece informações de rede baseadas na comunicação entre as "
-"diferentes instâncias do collectd. O Collectd pode operar tanto no modo "
-"cliente quanto no modo servidor. No modo cliente os dados coletados "
-"localmente são transferidos para um servidor collectd. No modo de servidor, "
-"o servidor local recebe os dados de outros servidores."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"O plugin ping irá enviar pacotes ICMP to tipo echo aos equipamentos "
-"selecionados e medir o tempo de resposta para cada equipamento."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"O plugin de processos coleta informações como o tempo da cpu, falha de "
-"página e uso de memória dos processos selecionados."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"O plugin rrdtool armazena os dados coletados no arquivo de banco de dados "
-"rrd.<br /><br /><strong>Aviso: A má configuração desses valores, resultará "
-"em um valor muito elevado no consumo de memória no diretório temporário. "
-"Isso pode tornar o equipamento inutilizável!</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"As estatísticas são baseadas no <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> e é utilizado o <a href=\"http://oss.oetiker.ch/rrdtool/"
-"\">RRD Tool</a> para renderização das imagens a partir dos dados coletados."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"O plugin tcpconns coleta informações sobre as conexões TCP abertas das "
-"portas selecionadas."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"O plugin unixsock cria um socket unix, que pode ser usado para ler os dados "
-"coletados a partir de uma collectd em execução."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Esta seção define em quais interfaces o collectd irá aguardar para receber "
-"conexões."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Esta seção define para qual servidor os dados coletados localmente serão "
-"enviados."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Tentar encontrar o nome do host completo (FQDN)"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Configuração do plugin Unixsock"
-
-msgid "Used PID file"
-msgstr "Arquivo PID usado"
-
-msgid "User"
-msgstr "usuário"
-
-msgid "Verbose monitoring"
-msgstr "Monitoramento no modo detalhado"
-
-msgid "Wireless"
-msgstr "Rede Sem Fio (Wireless)"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr "Configuração do Plugin iwinfo da Rede Sem Fio (Wireless)"
-
-msgid "e.g. br-ff"
-msgstr "ex: br-ff"
-
-msgid "e.g. br-lan"
-msgstr "ex: br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "ex: rejeitar-com tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "máx. 16 caracteres"
-
-msgid "reduces rrd size"
-msgstr "reduzir o tamanho do rrd"
-
-msgid "seconds; multiple separated by space"
-msgstr "segundos; vários valores, separar com espaço"
-
-msgid "server interfaces"
-msgstr "interfaces do servidor"
-
-#~ msgid "Installed network plugins:"
-#~ msgstr "Plugins de rede instalados:"
-
-#~ msgid "Installed output plugins:"
-#~ msgstr "Plugins de saída instalados:"
-
-#~ msgid ""
-#~ "Network plugins are used to collect information about open tcp "
-#~ "connections, interface traffic, iptables rules etc."
-#~ msgstr ""
-#~ "Os plugins de rede são utilizados para coletar informações sobre conexões "
-#~ "tcp abertas, tráfego da interface, regras do iptables, etc."
-
-#~ msgid ""
-#~ "Output plugins provide different possibilities to store collected data. "
-#~ "It is possible to enable multiple plugin at one, for example to store "
-#~ "collected data in rrd databases and to transmit the data over the network "
-#~ "to other collectd instances."
-#~ msgstr ""
-#~ "Os plugins de saída proveem diferentes possibilidades para armazenar os "
-#~ "dados coletados. É possível habilitar diversos plugin para, por exemplo, "
-#~ "coletar dados em bancos de dados rrd e transmitir os dados através da rede "
-#~ "para outro serviço collectd."
-
-#~ msgid ""
-#~ "System plugins collecting values about system state and ressource usage "
-#~ "on the device.:"
-#~ msgstr ""
-#~ "Plugins do sistema coletando valores sobre o estado do sistema e uso dos "
-#~ "recursos neste dispositivo.:"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "O plugin wireless coleta estatísticas sobre o nível de sinal wireless, o "
-#~ "ruído e qualidade."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Configuração do Plugin da Rede Sem Fio (Wireless)"
diff --git a/po/pt_BR/tinyproxy.po b/po/pt_BR/tinyproxy.po
deleted file mode 100644
index ef7ffda..0000000
--- a/po/pt_BR/tinyproxy.po
+++ /dev/null
@@ -1,367 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-16 02:38+0200\n"
-"Last-Translator: Julio Cezar <jsilvestree@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-"<em>Via proxy</em> encaminha as requisições para um dado destino através do "
-"proxy superior especificado, <em>Rejeitar acesso</em> desabilita qualquer "
-"proxy superior para o alvo"
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"Adiciona no cabeçalho do HTTP o campo \"X-Tinyproxy\" com o endereço IP do "
-"cliente para encaminhar a requisição"
-
-msgid "Allowed clients"
-msgstr "Clientes permitidos"
-
-msgid "Allowed connect ports"
-msgstr "Portas de conexão permitidas"
-
-msgid "Bind address"
-msgstr "Endereço de saída"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"Por padrão, os filtros usam expressões POSIX básicas. Habilite esta opção "
-"para usar expressões regulares extendidas"
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-"Por padrão, as regras são tratadas como insensíveis a caixa. Habilite esta "
-"opção para diferenciar maiúsculas e minúsculas"
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-"Por padrão, a filtragem é feita baseada nos domínios. Habilite esta opção "
-"para, ao invés disto, casar com URLs"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"Por padrão, as regras de filtragem atuam como uma lista negra. Habilite esta "
-"opção para somente permitir URLs ou domínios que casem"
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-"Pode ser tanto um como uma faixa de endereços IP, um nome de dompínio ou \"."
-"\" para qualquer computador sem domínio"
-
-msgid "Configuration"
-msgstr "Configuração"
-
-msgid "Connection timeout"
-msgstr "Tempo limite de conexão"
-
-msgid "Default deny"
-msgstr "Nege por padrão"
-
-msgid "Enable Tinyproxy server"
-msgstr "Habilitar o servidor Tinyproxy"
-
-msgid "Error page"
-msgstr "Página de erro"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr "Falhou ao tentar obter estatísticas da URL:"
-
-msgid "Filter by RegExp"
-msgstr "Filtrar por Expressão Regular"
-
-msgid "Filter by URLs"
-msgstr "Filtrar por URLs"
-
-msgid "Filter case-sensitive"
-msgstr "Diferenciar maiúsculo/minúsculo no filtro"
-
-msgid "Filter file"
-msgstr "Arquivo de filtro"
-
-msgid "Filtering and ACLs"
-msgstr "Filtragem e ACLs"
-
-msgid "General settings"
-msgstr "Configurações gerais"
-
-msgid "Group"
-msgstr "Grupo"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-"Modelo de arquivo HTML para servir para requisições de estado do computador"
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "Modelo de arquivo HTML para servir quando ocorrer error HTTP"
-
-msgid "Header whitelist"
-msgstr "Lista branca do cabeçalho"
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-"Lista ou faixa de endereços IP a quem é permitido o uso do servidor proxy"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-"List as portas que podem utilizar o método CONNECT. Um valor \"0\" único "
-"permitirá todas as portas"
-
-msgid "Listen address"
-msgstr "Endereço de escuta"
-
-msgid "Listen port"
-msgstr "Porta de escuta"
-
-msgid "Log file"
-msgstr "Arquivo de registro"
-
-msgid "Log file to use for dumping messages"
-msgstr "Arquivo de registro usado para despejar as mensagens"
-
-msgid "Log level"
-msgstr "Nível do registro"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr "Detalhamento dos registors do Tinyproxy"
-
-msgid "Max. clients"
-msgstr "Número máximo de clientes"
-
-msgid "Max. requests per server"
-msgstr "Numero máximo de requisições por servidor"
-
-msgid "Max. spare servers"
-msgstr "Max. servidores sobressalentes"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr "Numero máximo permitido de cliente conectados concorrentemente"
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-"Numero máximo de requisições permitidas por processo. Se este limite é "
-"excedido, o processo é redisparado. Zero significa ilimitado."
-
-msgid "Maximum number of prepared idle processes"
-msgstr "Número máximo de processos em espera preparados"
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr "Número máximo de segundos que uma conexão inativa é mantida aberta"
-
-msgid "Min. spare servers"
-msgstr "Número mínimo de servidores sobressalentes"
-
-msgid "Minimum number of prepared idle processes"
-msgstr "Número mínimo de processos em espera preparados"
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr "Número de processos em espera iniciado quando o Tinyproxy é disparado"
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-"Arquivo de texto simples com as URLs ou os domínios para filtrar. Uma "
-"entrada por linha"
-
-msgid "Policy"
-msgstr "Política"
-
-msgid "Privacy settings"
-msgstr "Configurações de privacidade"
-
-msgid "Reject access"
-msgstr "Rejeitar acesso"
-
-msgid "Server Settings"
-msgstr "Configurações do Servidor"
-
-msgid "Server limits"
-msgstr "Limites do servidor"
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-"Especifica os nomes dos cabeçalhos HTTP que serão permitidos. Todos os "
-"demais serão descartados. Deixe em branco para desabilitar a filtragem de "
-"cabeçalho"
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr "Especifica a porta na qual o Tinyproxy escutará pelas requisições"
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-"Especifica o nome do computador que o Tinyproxy usará no cabeçalho HTTP"
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-"Especifica o endereço que o Tinyproxy utilizará para encaminhar as "
-"requisições"
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr "Especifica o endereço no qual o Tinyproxy escutará pelas requisições"
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr "Especifica o nome do grupo com o qual o processo do Tinyproxy rodará"
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-"Especifica o proxy superior para usar quando acessar o alvo. Formato é "
-"<code>address:port</code>"
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr "Especifica o nome do usuário com o qual o processo do Tinyproxy rodará"
-
-msgid "Start spare servers"
-msgstr "Dispare servidores de espera"
-
-msgid "Statistics page"
-msgstr "Página de estatística"
-
-msgid "Status"
-msgstr "Estado"
-
-msgid "Target host"
-msgstr "Host de destino"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr "Estado do Tinyproxy"
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy é um pequeno e rápido Proxy-HTTP(S) sem suporte a cache"
-
-msgid "Upstream Proxies"
-msgstr "Proxies superiores"
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-"As regras do proxy superior define os servidores de proxy para uso quando "
-"certos endereços IP ou domínios forem acessados."
-
-msgid "Use syslog"
-msgstr "Use o syslog"
-
-msgid "User"
-msgstr "Usuário"
-
-msgid "Via hostname"
-msgstr "Via nome do computador"
-
-msgid "Via proxy"
-msgstr "Via proxy"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-"Escreve as mensagens de registros para o syslog ao invéz do arquivo de "
-"registro"
-
-msgid "X-Tinyproxy header"
-msgstr "Cabeçalho do X-Tinyproxy"
-
-#~ msgid "Allow access from"
-#~ msgstr "Permitir acesso de"
-
-#~ msgid "Allowed headers for anonymous proxy"
-#~ msgstr "Cabeçalhos permitidos para proxy anônimo"
-
-#~ msgid "Bind outgoing traffic to address"
-#~ msgstr "Associar o tráfego de saída ao endereço"
-
-#~ msgid "Ports allowed for CONNECT method"
-#~ msgstr "Portas permitidas para o método CONNECT "
-
-#~ msgid "0 = disabled, empty = all"
-#~ msgstr "0 = desativado, vazio = todas"
-
-#~ msgid "Error document"
-#~ msgstr "Documento de erro"
-
-#~ msgid "Filter list"
-#~ msgstr "Lista de filtros"
-
-#~ msgid "Case sensitive filters"
-#~ msgstr "Filtros \"case sensitive\""
-
-#~ msgid "Filter list is a whitelist"
-#~ msgstr "A lista de filtros é uma lista branca"
-
-#~ msgid "Extended regular expression filters"
-#~ msgstr "Filtros com suporte à expressões regulares"
-
-#~ msgid "Filter URLs instead of domains"
-#~ msgstr "Filtrar URLs em vez de domínios"
-
-#~ msgid "Listen on address"
-#~ msgstr "Escutar no endereço"
-
-#~ msgid "Logfile"
-#~ msgstr "Arquivo de log"
-
-#~ msgid "Maximum number of clients"
-#~ msgstr "Número máximo de clientes"
-
-#~ msgid "Maximum requests per thread"
-#~ msgstr "Máximo de solicitações por thread"
-
-#~ msgid "Spare servers to start with"
-#~ msgstr "Servidores sobressalentes iniciar com"
-
-#~ msgid "Statistic document"
-#~ msgstr "Documento de estatísticas"
-
-#~ msgid "Write to syslog"
-#~ msgstr "Escrever para syslog"
-
-#~ msgid "Connection Timeout"
-#~ msgstr "Timeout de conexão"
-
-#~ msgid "Value of Via-Header"
-#~ msgstr "Valor do cabeçalho \"Via-Header\""
-
-#~ msgid "Include client IP"
-#~ msgstr "Incluir o IP do cliente"
-
-#~ msgid "Upstream Control"
-#~ msgstr "Controle de Upstream"
-
-#~ msgid "Type"
-#~ msgstr "Tipo"
-
-#~ msgid "Upstream Proxy"
-#~ msgstr "Proxy para Upstream"
diff --git a/po/pt_BR/transmission.po b/po/pt_BR/transmission.po
deleted file mode 100644
index e9e530d..0000000
--- a/po/pt_BR/transmission.po
+++ /dev/null
@@ -1,300 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-07-06 16:27+0200\n"
-"PO-Revision-Date: 2012-11-11 04:37+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Alternative download speed"
-msgstr "Velocidade alternativa para baixar"
-
-msgid "Alternative speed enabled"
-msgstr "Velocidade alternativa ativada"
-
-msgid "Alternative speed time begin"
-msgstr "Hora de início da velocidade alternativa"
-
-msgid "Alternative speed time day"
-msgstr "Dia da velocidade alternativa"
-
-msgid "Alternative speed time end"
-msgstr "Hora final da velocidade alternativa"
-
-msgid "Alternative speed timing enabled"
-msgstr "Temporização da velocidade alternativa habilitada"
-
-msgid "Alternative upload speed"
-msgstr "Velocidade de subida alternativa"
-
-msgid "Automatically start added torrents"
-msgstr "Iniciar automaticamente os torrents adicionados "
-
-msgid "Bandwidth settings"
-msgstr "Configurações da velocidade do enlace"
-
-msgid "Binding address IPv4"
-msgstr "Endereço de escuta IPv4"
-
-msgid "Binding address IPv6"
-msgstr "Endereço de escuta IPv6"
-
-msgid "Block list enabled"
-msgstr "Lista de Bloqueios habilitada"
-
-msgid "Blocklist URL"
-msgstr "URL da lista de bloqueio"
-
-msgid "Blocklists"
-msgstr "Lista de Bloqueio"
-
-msgid "Cache size in MB"
-msgstr "Tamanho em MB do cache"
-
-msgid "Config file directory"
-msgstr "Diretório dos arquivos de configuração"
-
-msgid "DHT enabled"
-msgstr "DHT habilitado"
-
-msgid "Debug"
-msgstr "Depuração"
-
-msgid "Download directory"
-msgstr "Diretório de arquivos baixados "
-
-msgid "Download queue enabled"
-msgstr "Fila para baixar habilitada"
-
-msgid "Download queue size"
-msgstr "Tamanho da fila para baixar "
-
-msgid "Enable watch directory"
-msgstr "Habilitar monitoramento de diretório"
-
-msgid "Enabled"
-msgstr "Habilitar"
-
-msgid "Encryption"
-msgstr "Cifragem"
-
-msgid "Error"
-msgstr "Erro"
-
-msgid "Fast"
-msgstr "Rápido"
-
-msgid "Files and Locations"
-msgstr "Arquivos e Locais"
-
-msgid "Forced"
-msgstr "forçado"
-
-msgid "Full"
-msgstr "Cheio"
-
-msgid "Global peer limit"
-msgstr "Limite global de parceiros conectados"
-
-msgid "Global settings"
-msgstr "Configurações Globais"
-
-msgid "Idle seeding limit"
-msgstr "Limite para parar de semear se ocioso"
-
-msgid "Idle seeding limit enabled"
-msgstr "Habilitar limite para parar de semear se ocioso"
-
-msgid "Incomplete directory"
-msgstr "Diretório de incompletos"
-
-msgid "Incomplete directory enabled"
-msgstr "Diretório de incompletos habilitado"
-
-msgid "Info"
-msgstr "informação"
-
-msgid "LPD enabled"
-msgstr "LPD habilitado"
-
-msgid "Lazy bitfield enabled"
-msgstr "Envio de campo de bits incompletos habilitado"
-
-msgid "Message level"
-msgstr "Nível de mensagens"
-
-msgid "Miscellaneous"
-msgstr "Diversos"
-
-msgid "None"
-msgstr "Nada"
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-"Número/Campo de bits. Comece com 0 e, então, para cada dia você quer o "
-"agendador habilitado, adicione um valor. Para domingo - 1, segunda-feira - "
-"2, terça-feira - 4, quarta-feira - 8, quinta-feira - 16, sexta-feira - 32, "
-"Sábado - 64"
-
-msgid "Off"
-msgstr "Desligado"
-
-msgid "Open Web Interface"
-msgstr "Abrir interface Web"
-
-msgid "PEX enabled"
-msgstr "PEX habilitado"
-
-msgid "Peer Port settings"
-msgstr "Configuração de porta do parceiro"
-
-msgid "Peer congestion algorithm"
-msgstr "Algoritmo de congestionamento dos parceiro"
-
-msgid "Peer limit per torrent"
-msgstr "Limite de torrents por parceiro"
-
-msgid "Peer port"
-msgstr "Porta do parceiro"
-
-msgid "Peer port random high"
-msgstr "Limite superior da porta aleatória do parceiro"
-
-msgid "Peer port random low"
-msgstr "Limite inferior da porta aleatória do parceiro"
-
-msgid "Peer port random on start"
-msgstr "Porta aleatória inicial do parceiro"
-
-msgid "Peer settings"
-msgstr "Configuração do parceiro"
-
-msgid "Peer socket tos"
-msgstr "TOS da conexão do parceiro"
-
-msgid "Port forwarding enabled"
-msgstr "Encaminhamento de porta ativado"
-
-msgid "Preferred"
-msgstr "Preferencial"
-
-msgid "Prefetch enabled"
-msgstr "Adiantamento de leitura de disco habilitado"
-
-msgid "Queue stalled enabled"
-msgstr "Parada de fila habilitada"
-
-msgid "Queue stalled minutes"
-msgstr "Parada de fila em minutos"
-
-msgid "Queueing"
-msgstr "Filas"
-
-msgid "RPC URL"
-msgstr "RPC URL"
-
-msgid "RPC authentication required"
-msgstr "RPC requer autenticação "
-
-msgid "RPC bind address"
-msgstr "Endereço de escuta do RPC"
-
-msgid "RPC enabled"
-msgstr "RPC habilitado"
-
-msgid "RPC password"
-msgstr "Senha do RPC"
-
-msgid "RPC port"
-msgstr "Porta do RPC"
-
-msgid "RPC settings"
-msgstr "Configuração do RPC"
-
-msgid "RPC username"
-msgstr "Nome do usuario do RPC"
-
-msgid "RPC whitelist"
-msgstr "Lista branca do RPC"
-
-msgid "RPC whitelist enabled"
-msgstr "Lista branca do RPC habilitada"
-
-msgid "Ratio limit"
-msgstr "Limite da relação"
-
-msgid "Ratio limit enabled"
-msgstr "Limite da relação habilitado"
-
-msgid "Rename partial files"
-msgstr "Renomear arquivos parciais"
-
-msgid "Run daemon as user"
-msgstr "Executar serviço como usuário"
-
-msgid "Scheduling"
-msgstr "Agendamento"
-
-msgid "Scrape paused torrents enabled"
-msgstr "Busca de informações de torrents pausados ​​habilitada"
-
-msgid "Script torrent done enabled"
-msgstr "Script de conclusão de torrent habilitado"
-
-msgid "Script torrent done filename"
-msgstr "Nome do arquivo do script de conclusão de torrent"
-
-msgid "Seed queue enabled"
-msgstr "Fila de semeadura habilitada"
-
-msgid "Seed queue size"
-msgstr "Tamanho da fila de semeadura"
-
-msgid "Speed limit down"
-msgstr "Limite inferior de velocidade"
-
-msgid "Speed limit down enabled"
-msgstr "Limite inferior de velocidade habilitado"
-
-msgid "Speed limit up"
-msgstr "Limite superior de velocidade"
-
-msgid "Speed limit up enabled"
-msgstr "Limite superior de velocidade habilitado"
-
-msgid "Transmission"
-msgstr "Transmission"
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-"O Transmission é um cliente BitTorrent simples, aqui você pode configurá-lo."
-
-msgid "Trash original torrent files"
-msgstr "Apague os arquivos torrent originais"
-
-msgid "Upload slots per torrent"
-msgstr "Vagas para conexão de envio por torrent"
-
-msgid "Watch directory"
-msgstr "Monitorar diretório"
-
-msgid "in minutes from midnight"
-msgstr "em minutos a partir da meia-noite"
-
-msgid "preallocation"
-msgstr "pré-alocação"
-
-msgid "uTP enabled"
-msgstr "uTP habilitado"
diff --git a/po/pt_BR/upnp.po b/po/pt_BR/upnp.po
deleted file mode 100644
index 9df27ee..0000000
--- a/po/pt_BR/upnp.po
+++ /dev/null
@@ -1,165 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2011-10-18 22:17+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"ACLs especificam quais portas externas podem ser redirecionadas para quais "
-"endereços e portas internos"
-
-msgid "Action"
-msgstr "Ação"
-
-msgid "Active UPnP Redirects"
-msgstr "Redirecionamentos UPnP Ativos"
-
-msgid "Advanced Settings"
-msgstr "Configurações Avançadas"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-"Permite adicionar encaminhamento apenas para o endereço IP requisitante"
-
-msgid "Announced model number"
-msgstr "Número do modelo anunciado"
-
-msgid "Announced serial number"
-msgstr "Número serial anunciado"
-
-msgid "Clean rules interval"
-msgstr "Intervalo de limpeza das regras"
-
-msgid "Clean rules threshold"
-msgstr "Limiar de limpeza das regras"
-
-msgid "Client Address"
-msgstr "Endereço do cliente"
-
-msgid "Client Port"
-msgstr "Porta do Cliente"
-
-msgid "Collecting data..."
-msgstr "Coletando dados..."
-
-msgid "Comment"
-msgstr "Comentário"
-
-msgid "Delete Redirect"
-msgstr "Apague o Redirecionamento"
-
-msgid "Device UUID"
-msgstr "UUID do Dispositivo"
-
-msgid "Downlink"
-msgstr "Velocidade de recebimento do enlace (downlink)"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Habilite a função NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Habilite a função UPnP"
-
-msgid "Enable additional logging"
-msgstr "Habilite registros adicionais"
-
-msgid "Enable secure mode"
-msgstr "Habilite modo seguro"
-
-msgid "External Port"
-msgstr "Porta Externa"
-
-msgid "External ports"
-msgstr "Portas Externas"
-
-msgid "General Settings"
-msgstr "Configurações Gerais"
-
-msgid "Internal addresses"
-msgstr "Endereços internos"
-
-msgid "Internal ports"
-msgstr "Portas internas"
-
-msgid "MiniUPnP ACLs"
-msgstr "ACLs do MiniUPnP"
-
-msgid "MiniUPnP settings"
-msgstr "Configurações do MiniUPnP"
-
-msgid "Notify interval"
-msgstr "Intervalo de notificação"
-
-msgid "Port"
-msgstr "Porta"
-
-msgid "Presentation URL"
-msgstr "URL de apresentação"
-
-msgid "Protocol"
-msgstr "Protocolo"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Envie informações extra de depuração ao registro do sistema"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Informe o tempo de vida do sistema ao invés do tempo do processo"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Dispare os serviços de UPnP e NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Não existe redirecionamentos ativos."
-
-msgid "UPNP"
-msgstr ""
-"<abbr title=\"Universal Plug and Play, Plugue e Use Universal\">UPnP</abbr>"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permite os clientes da rede local configurem automaticamente o roteador."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP permite os clientes da rede local configurem automaticamente o roteador."
-
-msgid "UPnP lease file"
-msgstr "Arquivo de concessão do UPnP"
-
-msgid "Universal Plug & Play"
-msgstr "Plug & Play Universal"
-
-msgid "Uplink"
-msgstr "Velocidade de envio do enlace (uplink)"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Valores em KByte/s, apenas informativas"
-
-msgid "enable"
-msgstr "habilitar"
-
-#~ msgid "Log output"
-#~ msgstr "Log de saída"
-
-#~ msgid ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
-#~ msgstr ""
-#~ "O UPNP deve ser ativado apenas se for absolutamente necessário, pois ele "
-#~ "pode resultar em elevados riscos de segurança para sua rede."
diff --git a/po/pt_BR/ushare.po b/po/pt_BR/ushare.po
deleted file mode 100644
index 5fc872e..0000000
--- a/po/pt_BR/ushare.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:41+0200\n"
-"PO-Revision-Date: 2012-09-26 23:09+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "Diretórios de conteúdo"
-
-msgid "Disable telnet console"
-msgstr "Desativar console telnet"
-
-msgid "Disable webinterface"
-msgstr "Desativar interface web"
-
-msgid "Enable"
-msgstr "Habilitar"
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Options"
-msgstr "Opções"
-
-msgid "Servername"
-msgstr "Nome do servidor"
-
-msgid "Settings"
-msgstr "Configurações"
-
-msgid "Username"
-msgstr "Nome do usuário"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"uShare é um Servidor de Mídia DLNA & UPnP (TM) A/V. Implementa o componente "
-"do servidor que provê aos dispositivos de mídia UPnP informações sobre os "
-"arquivos multimídias disponíveis."
diff --git a/po/pt_BR/uvc_streamer.po b/po/pt_BR/uvc_streamer.po
deleted file mode 100644
index 9ae2e61..0000000
--- a/po/pt_BR/uvc_streamer.po
+++ /dev/null
@@ -1,40 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Quadros por segundo"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Resolução"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Definições"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Webcam transmitindo"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Configure sua webcam compatível com Linux-UVC. Aponte seu navegador para, "
-"por exemplo, <a href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/pt_BR/vnstat.po b/po/pt_BR/vnstat.po
deleted file mode 100644
index 47cf09a..0000000
--- a/po/pt_BR/vnstat.po
+++ /dev/null
@@ -1,68 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-11 21:02+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: German\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configuration"
-msgstr "Configuração"
-
-msgid "Daily traffic"
-msgstr "Tráfego diário"
-
-msgid "Graphs"
-msgstr "Gráficos"
-
-msgid "Hourly traffic"
-msgstr "Tráfego horário"
-
-msgid "Monitor selected interfaces"
-msgstr "Monitore as interfaces selecionadas"
-
-msgid "Monthly traffic"
-msgstr "Tráfego mensal"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Ainda nenhum banco de dados foi definido. Vá para a configuração do VnStat "
-"ehabilite o monitoramento para um ou mais interfaces."
-
-msgid "Restart VnStat"
-msgstr "Reiniciar VnStat"
-
-msgid "Summary display"
-msgstr "Tela de resumo"
-
-msgid "Top 10 display"
-msgstr "Tela dos 10 mais"
-
-msgid "Update »"
-msgstr "Atualizar »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Gráficos VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Monitor de Tráfego VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat é um monitor de tráfego de rede para Linux que mantém um registro do "
-"tráfego para a(s) interface(s) selecionada(s)."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "O serviço VnStat foi reiniciado."
diff --git a/po/pt_BR/voice_core.po b/po/pt_BR/voice_core.po
deleted file mode 100644
index 18cab72..0000000
--- a/po/pt_BR/voice_core.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-07-05 06:44+0200\n"
-"Last-Translator: rafaelff1 <rafael.f.f1@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Telefones"
-
-msgid "Voice"
-msgstr "Voz"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/pt_BR/voice_diag.po b/po/pt_BR/voice_diag.po
deleted file mode 100644
index c5d426d..0000000
--- a/po/pt_BR/voice_diag.po
+++ /dev/null
@@ -1,32 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-11 20:31+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Diagnostics"
-msgstr "Diagnósticos"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Os diagnósticos disponíveis em seu dispositivo dependem dos módulos que você "
-"instalou."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Neste menu existem opções que permite a configuração e execução de testes "
-"nas operações de voz em seu sistema. Estas são conhecidas como diagósticos."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/pt_BR/watchcat.po b/po/pt_BR/watchcat.po
deleted file mode 100644
index dab45f0..0000000
--- a/po/pt_BR/watchcat.po
+++ /dev/null
@@ -1,69 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-07-06 16:24+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Forced reboot delay"
-msgstr "Atraso para reinício forçado"
-
-msgid "Host address to ping"
-msgstr "Endereço do equipamento para efetuar o PING"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"Com qual frequência deve verificar a conexão com a Internet. A unidade "
-"padrão é segundos, mas você pode usar o sufixo 'm' para minutos, 'h' para "
-"horas ou 'd' para dias"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"No modo periódico, é definido o período para se reiniciar. No modo Internet, "
-"é definido o maior período de tempo sem acesso à Internet até que uma "
-"reinicialização é realizada. A unidade padrão é segundos, mas você pode usar "
-"o sufixo 'm' para minutos, 'h' para horas ou 'd' para dias."
-
-msgid "Operating mode"
-msgstr "Modo de Operação"
-
-msgid "Period"
-msgstr "Período"
-
-msgid "Ping host"
-msgstr "Pingar Máquina"
-
-msgid "Ping period"
-msgstr "Período de ping"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Watchcat permite que se configure um período para reinicializar e/ou quando "
-"a conexão com à Internet foi perdida por um ser período de tempo."
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"Ao se reinicializar o sistema, watchcat acionará uma reinicialização suave. "
-"Ao se inserir um valor diferente de zero aqui, será acionado uma "
-"reinicialização forçada se a reinicialização suave falhar. Insira um número "
-"de segundos para habilitar, use 0 para desabilitar."
diff --git a/po/pt_BR/wol.po b/po/pt_BR/wol.po
deleted file mode 100644
index eda9dcd..0000000
--- a/po/pt_BR/wol.po
+++ /dev/null
@@ -1,55 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2011-10-11 20:31+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: none\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Broadcast em todas as interfaces"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Escolha o computador para acordar ou entre com um endereço MAC"
-
-msgid "Host to wake up"
-msgstr "Computador para acordar"
-
-msgid "Network interface to use"
-msgstr "Interfaces de rede para usar"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Algumas vezes, somente uma das ferramentas funciona. Se uma delas falhar, "
-"tente a outra"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Especifica a interface para onde os pacotes de WoL serão enviados"
-
-msgid "Starting WoL utility:"
-msgstr "Iniciando utilitário WoL:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LAN é um mecanismo para acordar/ligar remotamente computadores na "
-"rede local."
-
-msgid "Wake up host"
-msgstr "Acorda um computador"
-
-msgid "WoL program"
-msgstr "Programa WoL"
diff --git a/po/pt_BR/wshaper.po b/po/pt_BR/wshaper.po
deleted file mode 100644
index 7e402b6..0000000
--- a/po/pt_BR/wshaper.po
+++ /dev/null
@@ -1,58 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-10-18 19:32+0200\n"
-"PO-Revision-Date: 2011-10-18 19:39+0200\n"
-"Last-Translator: Luiz Angelo <luizluca@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Downlink"
-msgstr "Velocidade para baixar (downlink)"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Taxa de transferência para baixar em kbit/s"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Equipamento ou Rede na notação CIDR."
-
-msgid "Interface"
-msgstr "Interface"
-
-msgid "Low priority destination ports"
-msgstr "Portas de destino de baixa prioridade"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Equipamentos de baixa prioridade (Destino)"
-
-msgid "Low priority hosts (Source)"
-msgstr "Equipamentos de baixa prioridade (Origem)"
-
-msgid "Low priority source ports"
-msgstr "Portas de origem de baixa prioridade"
-
-msgid "Uplink"
-msgstr "Velocidade para subir (uplink)"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Taxa de transferência para subir em kbit/s"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Configuração do Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper usa o controle de tráfego para garantir baixa latência para "
-"tráfego interativo mesmo quando sua conexão com a internet está extremamente "
-"saturada."
diff --git a/po/ro/ahcp.po b/po/ro/ahcp.po
deleted file mode 100644
index d96fdfa..0000000
--- a/po/ro/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 00:29+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "AHCP Server"
-msgstr "Server AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP este un protocol de autoconfigurare pentru IPv6 si IPv4 menit sa "
-"inlocuie \"router discovery\" si DHCP in retele unde este dificil de "
-"configurat un server pentru fiecare domeniu de broadcast pe fiecare "
-"legatura, de exemplu pentru retele mobile ad-hoc."
-
-msgid "Active AHCP Leases"
-msgstr "Conexiuni active AHCP"
-
-msgid "Address"
-msgstr "Adresa"
-
-msgid "Advanced Settings"
-msgstr "Setari avansate"
-
-msgid "Age"
-msgstr "Varsta"
-
-msgid "Announced DNS servers"
-msgstr "Servere DNS anuntate"
-
-msgid "Announced NTP servers"
-msgstr "Servere NTP anuntate"
-
-msgid "Announced prefixes"
-msgstr "Prefixe anuntate"
-
-msgid "Collecting data..."
-msgstr "Colectare date.."
-
-msgid "Forwarder"
-msgstr "Forwarder"
-
-msgid "General Setup"
-msgstr "Configurare generala"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 si IPv6"
-
-msgid "IPv4 only"
-msgstr "Doar IPv4 "
-
-msgid "IPv6 only"
-msgstr "Doar IPv6 "
-
-msgid "Lease directory"
-msgstr "Director de conexiuni"
-
-msgid "Lease validity time"
-msgstr "Timpul pentru conexiuni valide"
-
-msgid "Log file"
-msgstr "Fisier log"
-
-msgid "Multicast address"
-msgstr "Adresa multicast"
-
-msgid "Operation mode"
-msgstr "Modul de operare"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Familia de protocol"
-
-msgid "Served interfaces"
-msgstr "Interfetele servite"
-
-msgid "Server"
-msgstr "Server"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Specifica serverele de NTP IPv4 si IPv6 anuntate"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Specifica serverele de DNS IPv4 si IPv6 anuntate"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Specifica prefixele IPv4 si IPv6 anuntate in format CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr "Nu exista conexiuni active."
-
-msgid "Unique ID file"
-msgstr "ID de fisier unic"
diff --git a/po/ro/asterisk.po b/po/ro/asterisk.po
deleted file mode 100644
index e271370..0000000
--- a/po/ro/asterisk.po
+++ /dev/null
@@ -1,54 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 00:35+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Optiunile generale Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Director AGI"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Dezactiveaza cateva avertizari"
-
-#~ msgid "High Priority"
-#~ msgstr "Prioritate inalta"
-
-#~ msgid "Log directory"
-#~ msgstr "Director de loguri"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Incarcarea maxima de cand se refuza apeluri noi"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Dezactiveaza culorile in consola"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Ruleaza sub grupul"
-
-#~ msgid "The User to run as"
-#~ msgstr "Ruleaza sub utilizatorul"
-
-#~ msgid "Time Zone"
-#~ msgstr "Fusul orar"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Permite transferul"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Goleste variabilele globale"
-
-#~ msgid "Connection to use"
-#~ msgstr "Conexiunea pentru folosire"
diff --git a/po/ro/base.po b/po/ro/base.po
deleted file mode 100644
index e832933..0000000
--- a/po/ro/base.po
+++ /dev/null
@@ -1,2950 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-01 16:10+0200\n"
-"Last-Translator: cgherman <cgherman@mandrivausers.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-msgid "(%s available)"
-msgstr ""
-
-msgid "(empty)"
-msgstr ""
-
-msgid "(no interfaces attached)"
-msgstr "(nici o interfata atasata)"
-
-msgid "-- Additional Field --"
-msgstr "-- Camp suplimentar --"
-
-msgid "-- Please choose --"
-msgstr "-- Te rog sa alegi --"
-
-msgid "-- custom --"
-msgstr "-- particularizat --"
-
-msgid "1 Minute Load:"
-msgstr "Incarcarea in ultimul minut"
-
-msgid "15 Minute Load:"
-msgstr "Incarcarea in ultimele 15 minute"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz 2 canale de mai jos"
-
-msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr "Incarcarea in ultimele 5 minute"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr>port de apelare"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "Adresa <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "Masca de retea <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr ""
-
-msgid "ARP retry threshold"
-msgstr ""
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Actions"
-msgstr ""
-
-msgid "Activate this network"
-msgstr "Activeaza aceasta retea"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Rute active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Rute active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-msgid "Active Connections"
-msgstr "Conexiuni active"
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Adauga"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Adauga un sufix local numelor servite din fisierele de tip hosts"
-
-msgid "Add new interface..."
-msgstr "Adauga interfata noua.."
-
-msgid "Additional Hosts files"
-msgstr "Fisiere de tip hosts aditionale"
-
-msgid "Address"
-msgstr "Adresa"
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr "Administrare"
-
-msgid "Advanced Settings"
-msgstr "Setari avansate"
-
-msgid "Advertise IPv6 on network"
-msgstr "Anunta IPv6 in retea"
-
-msgid "Advertised network ID"
-msgstr "ID-ul retelei anuntate"
-
-msgid "Alert"
-msgstr "Alerta"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Permite autentificarea prin parola a <abbr title=\"Secure Shell\">SSH</abbr> "
-
-msgid "Allow all except listed"
-msgstr "Permite toate cu exceptia celor listate"
-
-msgid "Allow listed only"
-msgstr "Permite doar cele listate"
-
-msgid "Allow localhost"
-msgstr "Permite localhost"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr "Permite statiilor externe sa se conecteze la porturile SSH locale"
-
-msgid "Allow root logins with password"
-msgstr "Permite autentificarea contului root cu parola"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Permite contului <em>root</em> sa se autentifice cu parola"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr "Antena 1"
-
-msgid "Antenna 2"
-msgstr "Antena 2"
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr "Aplica"
-
-msgid "Applying changes"
-msgstr "Se aplica modificarile"
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr "Statiile asociate"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr "Autentificare"
-
-msgid "Authoritative"
-msgstr ""
-
-msgid "Authorization Required"
-msgstr ""
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr "Disponibil"
-
-msgid "Available packages"
-msgstr "Pachete disponibile"
-
-msgid "Average:"
-msgstr "Medie:"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr "Inapoi"
-
-msgid "Back to Overview"
-msgstr "Inapoi la sumar"
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
-
-msgid "Back to scan results"
-msgstr "Inapoi la rezultatele scanarii"
-
-msgid "Background Scan"
-msgstr "Scanare in fundal"
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr ""
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr "Adresa specificata gresit !"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr ""
-
-msgid "Bridge interfaces"
-msgstr "Leaga interfetele"
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr "Butoane"
-
-msgid "CPU"
-msgstr "Procesor"
-
-msgid "CPU usage (%)"
-msgstr "Utilizarea procesorului (%)"
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr "Anuleaza"
-
-msgid "Chain"
-msgstr ""
-
-msgid "Changes"
-msgstr "Modificari"
-
-msgid "Changes applied."
-msgstr "Modificari aplicate."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Schimba parola administratorului pentru accesarea dispozitivului"
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check"
-msgstr "Verificare"
-
-msgid "Checksum"
-msgstr ""
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr ""
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr "Colectez datele.."
-
-msgid "Command"
-msgstr "Comanda"
-
-msgid "Common Configuration"
-msgstr "Configurarea obisnuita"
-
-msgid "Compression"
-msgstr "Comprimare"
-
-msgid "Configuration"
-msgstr "Configurare"
-
-msgid "Configuration applied."
-msgstr "Configurarea aplicata."
-
-msgid "Configuration files will be kept."
-msgstr "Fisierele de configurare vor fi pastrate."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr "Confirmare"
-
-msgid "Connect"
-msgstr "Conectare"
-
-msgid "Connected"
-msgstr "Conectat"
-
-msgid "Connection Limit"
-msgstr "Limita de conexiune"
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr "Tara"
-
-msgid "Country Code"
-msgstr "Codul de tara"
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr ""
-
-msgid "Create Interface"
-msgstr "Creaza interfata"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr "Critic"
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-
-msgid "DHCP Leases"
-msgstr "Conexiuni DHCP"
-
-msgid "DHCP Server"
-msgstr "Server DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP si DNS"
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr "Optiuni DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr "Stare implicita"
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr "Sterge"
-
-msgid "Delete this interface"
-msgstr "Sterge aceasta interfata"
-
-msgid "Delete this network"
-msgstr "Sterge aceasta retea"
-
-msgid "Description"
-msgstr "Descriere"
-
-msgid "Design"
-msgstr ""
-
-msgid "Destination"
-msgstr "Destinatie"
-
-msgid "Device"
-msgstr "Dispozitiv"
-
-msgid "Device Configuration"
-msgstr "Configurarea dispozitivului"
-
-msgid "Diagnostics"
-msgstr "Diagnosticuri"
-
-msgid "Directory"
-msgstr "Director"
-
-msgid "Disable"
-msgstr "Dezactiveaza"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Dezactiveaza <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-"pentru aceasta interfata."
-
-msgid "Disable DNS setup"
-msgstr "Dezactiveaza configuratia DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr ""
-
-msgid "Disabled"
-msgstr "Dezactivat"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr "Optimizarea distantei"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Distanta catre cel mai departat membru din retea in metri."
-
-msgid "Diversity"
-msgstr "Diversitate"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr ""
-
-msgid "Domain required"
-msgstr "Domeniul necesar"
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-
-msgid "Download and install package"
-msgstr "Descarca si instaleaza pachetul"
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr "Instanta dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr ""
-
-msgid "Edit"
-msgstr "Editeaza"
-
-msgid "Edit this interface"
-msgstr "Editeaza aceasta interfata"
-
-msgid "Edit this network"
-msgstr "Editeaza aceasta retea"
-
-msgid "Emergency"
-msgstr "Urgenta"
-
-msgid "Enable"
-msgstr "Activeaza"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Activeaza <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr "Activeaza serverul TFTP"
-
-msgid "Enable VLAN functionality"
-msgstr "Activeaza VLAN-urile"
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr "Activeaza/Dezactiveaza"
-
-msgid "Enabled"
-msgstr "Activat"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr "Modul de incapsulare"
-
-msgid "Encryption"
-msgstr "Criptare"
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr "Eroare"
-
-msgid "Ethernet Adapter"
-msgstr "Adaptor de retea ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Switch-ul ethernet"
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr "Expira"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr "Server de log-uri extern"
-
-msgid "External system log server port"
-msgstr "Portul serverului de log-uri extern"
-
-msgid "Fast Frames"
-msgstr ""
-
-msgid "File"
-msgstr "Fisier"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr "Sistem de fisiere"
-
-msgid "Filter"
-msgstr "Filtreaza"
-
-msgid "Filter private"
-msgstr "Filtreaza privatele"
-
-msgid "Filter useless"
-msgstr "Filtreaza nefolositele"
-
-msgid "Find and join network"
-msgstr "Gaseste si alatura in retea"
-
-msgid "Find package"
-msgstr "Gaseste pachet"
-
-msgid "Finish"
-msgstr "Termina"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr "Setarile firewall-ului"
-
-msgid "Firewall Status"
-msgstr "Status la firewall"
-
-msgid "Firmware Version"
-msgstr "Versiunea de firmware"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Portul sursa pentru intrebarile DNS catre exterior"
-
-msgid "Flags"
-msgstr ""
-
-msgid "Flash Firmware"
-msgstr "Rescrie firmware"
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr "Forteaza"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-"Forteaza facilitatea DHCP in aceasta retea chiar daca alt server DHCP exista."
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr ""
-
-msgid "Frame Bursting"
-msgstr ""
-
-msgid "Free"
-msgstr "Liber"
-
-msgid "Free space"
-msgstr "Spatiu liber"
-
-msgid "Frequency Hopping"
-msgstr ""
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr "Gateway"
-
-msgid "Gateway ports"
-msgstr "Porturile gateway"
-
-msgid "General Settings"
-msgstr "Setari principale"
-
-msgid "General Setup"
-msgstr "Configurare generala"
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "Confirmarea parolei nu se potriveste cu prima, parola neschimbata !"
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr "Capabilitati HT"
-
-msgid "HT mode"
-msgstr "Mod HT"
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr ""
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Aici poti configura aspectele de baza ale dispozitivului cum ar fi numele "
-"sau fusul orar."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Ascunde <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Intrari de tip host"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Numele de host"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr "Nume de host"
-
-msgid "IP address"
-msgstr "Adresa IP"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "Firewall IPv4"
-
-msgid "IPv4 WAN Status"
-msgstr "Statusul IPv4 pe WAN"
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 si IPv6"
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr "Doar IPv4"
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr "Adresa IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "Firewall IPv6"
-
-msgid "IPv6 WAN Status"
-msgstr "Statusul IPv6 pe WAN"
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr "Doar IPv6"
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Identitate"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr ""
-
-msgid "Ignore resolve file"
-msgstr ""
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr ""
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr "Intrare:"
-
-msgid "Info"
-msgstr "Informatii"
-
-msgid "Initscript"
-msgstr ""
-
-msgid "Initscripts"
-msgstr ""
-
-msgid "Install"
-msgstr ""
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr "Interfata"
-
-msgid "Interface Configuration"
-msgstr "Configurarea interfetei"
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr "Interfata se reconecteaza.."
-
-msgid "Interface is shutting down..."
-msgstr "Interfata se opreste.."
-
-msgid "Interface not present or not connected yet."
-msgstr "Interfata nu e prezenta sau nu este conectata inca."
-
-msgid "Interface reconnected"
-msgstr "Interfata reconectata"
-
-msgid "Interface shut down"
-msgstr "Interfata oprita"
-
-msgid "Interfaces"
-msgstr "Interfete"
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr "Invalid"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Utilizator si parola invalide ! Incearca iar."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Se pare ca ai incercat sa rescrii o imagine care nu are loc in memoria "
-"flash, verifica fisierul din nou!"
-
-msgid "Java Script required!"
-msgstr "Ai nevoie de Java Script !"
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr "Log-ul kernelului"
-
-msgid "Kernel Version"
-msgstr "Versiunea de kernel"
-
-msgid "Key"
-msgstr ""
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr "Opreste"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr "Limba"
-
-msgid "Language and Style"
-msgstr "Limba si stilul interfetei"
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr ""
-
-msgid "Leasetime"
-msgstr ""
-
-msgid "Leasetime remaining"
-msgstr ""
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr "Legenda:"
-
-msgid "Limit"
-msgstr "Limita"
-
-msgid "Link On"
-msgstr ""
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "Incarcarea"
-
-msgid "Load Average"
-msgstr "Incarcarea medie"
-
-msgid "Loading"
-msgstr "Incarcare"
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr "Server local"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr ""
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr ""
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr ""
-
-msgid "Logout"
-msgstr ""
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr ""
-
-msgid "MAC-Filter"
-msgstr ""
-
-msgid "MAC-List"
-msgstr ""
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr "Rata maxima"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Numarul maxim de intrebari DNS simultane"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr ""
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Memorie"
-
-msgid "Memory usage (%)"
-msgstr "Utilizarea memoriei (%)"
-
-msgid "Metric"
-msgstr "Metrica"
-
-msgid "Minimum Rate"
-msgstr "Rata minima"
-
-msgid "Minimum hold time"
-msgstr ""
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Mod"
-
-msgid "Modem device"
-msgstr ""
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr ""
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr ""
-
-msgid "Mount Points"
-msgstr ""
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr ""
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr "Rata de multicast"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr ""
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Nume"
-
-msgid "Name of the new interface"
-msgstr "Numele interfetei noi"
-
-msgid "Name of the new network"
-msgstr "Numele interfetei noi"
-
-msgid "Navigation"
-msgstr "Navigare"
-
-msgid "Netmask"
-msgstr "Netmask"
-
-msgid "Network"
-msgstr "Retea"
-
-msgid "Network Utilities"
-msgstr "Utilitare de retea"
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr "Mai departe »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Nici un server DHCP configurat pentru aceasta interfata"
-
-msgid "No chains in this table"
-msgstr ""
-
-msgid "No files found"
-msgstr "Nici un fisier gasit"
-
-msgid "No information available"
-msgstr "Nici o informatie disponibila"
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr "Nici o retea configurata pe acest dispozitiv"
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr "Nici o parola setata !"
-
-msgid "No rules in this chain"
-msgstr ""
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr "Zgomot"
-
-msgid "Noise:"
-msgstr "Zgomot:"
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr "Normal"
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr "Ne-asociat."
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr "Nota: fisierele de configurare vor fi sterse."
-
-msgid "Notice"
-msgstr "Notificare"
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Configuratia-OPKG"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Unul sau mai multe campuri contin valori invalide !"
-
-msgid "One or more required fields have no value!"
-msgstr "Unul sau mai multe campuri nu contin valori !"
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr "Optiunea schimbata"
-
-msgid "Option removed"
-msgstr "Optiunea eliminata"
-
-msgid "Options"
-msgstr "Optiuni"
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr "Iesire"
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr ""
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Owner"
-msgstr "Proprietar"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr "Incapsulare PPPoA"
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr "Pachetul libiwinfo este necesar !"
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "Numele pachetului"
-
-msgid "Packets"
-msgstr "Pachete"
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr "Parola"
-
-msgid "Password authentication"
-msgstr "Autentificarea cu parola"
-
-msgid "Password of Private Key"
-msgstr "Parola cheii private"
-
-msgid "Password successfully changed!"
-msgstr "Parola schimbata cu succes !"
-
-msgid "Path to CA-Certificate"
-msgstr "Calea catre certificatul CA"
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "Calea catre cheia privata"
-
-msgid "Path to executable which handles the button event"
-msgstr "Calea catre executabilul care se ocupa de evenimentul butonului"
-
-msgid "Peak:"
-msgstr "Maxim:"
-
-msgid "Perform reboot"
-msgstr "Restarteaza"
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr "Rata phy:"
-
-msgid "Physical Settings"
-msgstr "Setarile fizice"
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr "Packete."
-
-msgid "Please enter your username and password."
-msgstr "Introdu utilizatorul si parola."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Asteapta: dispozitivul se restarteaza.."
-
-msgid "Policy"
-msgstr ""
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Port %d"
-msgstr "Port %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr ""
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Continua"
-
-msgid "Processes"
-msgstr "Procese"
-
-msgid "Prot."
-msgstr ""
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Protocol family"
-msgstr "Familia de protocol"
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr ""
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr ""
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Citeste fisierul <code>/etc/ethers</code> pentru configurarea serverului "
-"<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>-"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr "Conexiuni live"
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr "Incarcarea live"
-
-msgid "Realtime Traffic"
-msgstr "Traficul live"
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Rebooteaza"
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr "Rebooteaza sistemul de operare al dispozitivului tau"
-
-msgid "Receive"
-msgstr ""
-
-msgid "Receiver Antenna"
-msgstr "Antena receptorului"
-
-msgid "Reconnect this interface"
-msgstr "Reconecteaza aceasta interfata"
-
-msgid "Reconnecting interface"
-msgstr "Interfata se reconecteaza chiar acum"
-
-msgid "References"
-msgstr "Referinte"
-
-msgid "Regulatory Domain"
-msgstr "Domeniu regulatoriu"
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr "Elimina"
-
-msgid "Repeat scan"
-msgstr "Repeta scanarea"
-
-msgid "Replace entry"
-msgstr "Inlocuieste intrarea"
-
-msgid "Replace wireless configuration"
-msgstr "Inlocuieste configuratia wireless"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Reset"
-
-msgid "Reset Counters"
-msgstr "Reseteaza counterii"
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr "Fisierele de rezolvare si hosturi DNS"
-
-msgid "Resolve file"
-msgstr "Fisierul de rezolvare"
-
-msgid "Restart"
-msgstr "Restart"
-
-msgid "Restart Firewall"
-msgstr "Restarteaza firewallul"
-
-msgid "Restore backup"
-msgstr "Reface backup-ul"
-
-msgid "Reveal/hide password"
-msgstr "Arata / ascunde parola"
-
-msgid "Revert"
-msgstr ""
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr "Modelul routerului"
-
-msgid "Router Name"
-msgstr "Numele routerului"
-
-msgid "Router Password"
-msgstr "Parola routerului"
-
-msgid "Routes"
-msgstr "Rute"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-
-msgid "Rule #"
-msgstr "Regula #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr "Acces SSH"
-
-msgid "SSH-Keys"
-msgstr "Cheile SSH"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Salveaza"
-
-msgid "Save & Apply"
-msgstr "Salveaza si aplica"
-
-msgid "Save &#38; Apply"
-msgstr "Salveaza &#38; Aplica"
-
-msgid "Scan"
-msgstr "Scan"
-
-msgid "Scheduled Tasks"
-msgstr "Operatiuni programate"
-
-msgid "Section added"
-msgstr "Sectiune adaugata"
-
-msgid "Section removed"
-msgstr "Sectiune eliminata"
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr ""
-
-msgid "Separate WDS"
-msgstr ""
-
-msgid "Server Settings"
-msgstr "Setarile serverului"
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "Servicii"
-
-msgid "Setup DHCP Server"
-msgstr "Seteaza serverul DHCP"
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr "Opreste aceasta interfata"
-
-msgid "Shutdown this network"
-msgstr "Opreste aceasta retea"
-
-msgid "Signal"
-msgstr "Semnal"
-
-msgid "Signal:"
-msgstr "Semnal:"
-
-msgid "Size"
-msgstr "Marime"
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr ""
-
-msgid "Skip to navigation"
-msgstr ""
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr "Software"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr "Sursa"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr "Start"
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr "Pornire"
-
-msgid "Static IPv4 Routes"
-msgstr "Rute statice IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Rute statice IPv6"
-
-msgid "Static Leases"
-msgstr ""
-
-msgid "Static Routes"
-msgstr "Rute statice"
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Status"
-
-msgid "Stop"
-msgstr "Stop"
-
-msgid "Strict order"
-msgstr ""
-
-msgid "Submit"
-msgstr "Trimite"
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr ""
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "System Log"
-msgstr "Log de sistem"
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr "Setarile TFTP"
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr "Tabel"
-
-msgid "Target"
-msgstr "Tinta"
-
-msgid "Terminate"
-msgstr "Termina"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr ""
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr "Nu exista modificari in asteptare de aplicat !"
-
-msgid "There are no pending changes to revert!"
-msgstr "Nu exista modificari in asteptare de anulat !"
-
-msgid "There are no pending changes!"
-msgstr "Nu exista modificari in asteptare !"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Nu exista o parola pe acest router. Configureaza o parola la contul root "
-"pentru a proteja interfata web si porni SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Fusul orar"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr "Total disponibil"
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr "Trafic"
-
-msgid "Transfer"
-msgstr "Transfer"
-
-msgid "Transmission Rate"
-msgstr "Rata de transmitere"
-
-msgid "Transmit"
-msgstr ""
-
-msgid "Transmit Power"
-msgstr "Puterea de transmitere"
-
-msgid "Transmitter Antenna"
-msgstr "Antena de transmitere"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr "Interfata de tunel"
-
-msgid "Turbo Mode"
-msgstr "Mod turbo"
-
-msgid "Tx-Power"
-msgstr "Puterea TX"
-
-msgid "Type"
-msgstr "Tip"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr "Dispozitiv USB"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr "Eroare necunoscuta, parola neschimbata !"
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Modificari nesalvate"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr "Fisier incarcat"
-
-msgid "Uptime"
-msgstr "Uptime"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Foloseste <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Foloseste codurile de tara ISO/IEC 3166 alpha2."
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr "Foloseste ca sistem de fisiere primar"
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Folosit"
-
-msgid "Used Key Slot"
-msgstr "Slot de cheie folosit"
-
-msgid "Username"
-msgstr "Utilizator"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Interfata VLAN"
-
-msgid "VLANs on %q"
-msgstr "VLANuri pe %q"
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "Versiune"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "Sistem deschis WEP"
-
-msgid "WEP Shared Key"
-msgstr "Sistem de cheie impartasita WEP"
-
-msgid "WEP passphrase"
-msgstr "Parola WEP"
-
-msgid "WMM Mode"
-msgstr "Mod WMM"
-
-msgid "WPA passphrase"
-msgstr "Parola WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"Criptarea WPA necesita wpa_supplicant (pentru modul client) sau hostapd "
-"(pentru modul AP sau ad-hoc) instalate."
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr "Avertizare"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Atentie: exista modificari nesalvate care vor fi pierdute la restart !"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless Adapter"
-msgstr "Adaptorul wireless"
-
-msgid "Wireless Network"
-msgstr "Retea wireless"
-
-msgid "Wireless Overview"
-msgstr "Sumarul wireless"
-
-msgid "Wireless Security"
-msgstr "Securitate wireless"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Wireless-ul este dezactivat sau ne-asociat"
-
-msgid "Wireless is restarting..."
-msgstr "Wireless-ul se restarteaza.."
-
-msgid "Wireless network is disabled"
-msgstr "Reteaua wireless este dezactivata"
-
-msgid "Wireless network is enabled"
-msgstr "Reteaua wireless este activata"
-
-msgid "Wireless restarted"
-msgstr "Wireless-ul restartat"
-
-msgid "Wireless shut down"
-msgstr "Wireless-ul oprit"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Scrie cererile DNS primite in syslog"
-
-msgid "XR Support"
-msgstr "Suport XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr "oricare"
-
-msgid "auto"
-msgstr "auto"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr ""
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "dezactiveaza"
-
-msgid "expired"
-msgstr "expirat"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "ajutor"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr ""
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-
-msgid "no"
-msgstr "nu"
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr ""
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr "rutat"
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr "nelimitat"
-
-msgid "unspecified"
-msgstr "nespecificat"
-
-msgid "unspecified -or- create:"
-msgstr ""
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr "da"
-
-msgid "« Back"
-msgstr "« Inapoi"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Asteptam dupa router.."
-
-#~ msgid "Active Leases"
-#~ msgstr "Conexiuni dhcp active"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Configurare / Aplica"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Configurare / Schimbari"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Configurare / Anuleaza schimbarile"
-
-#~ msgid "Create Network"
-#~ msgstr "Creaza retea"
-
-#~ msgid "Networks"
-#~ msgstr "Retele"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Retele wireless in apropiere"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "Adresa <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "Aliasuri IP"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Setarea IPv6"
-
-#~ msgid "Detected Files"
-#~ msgstr "Fisiere detectate"
-
-#~ msgid "Detected files"
-#~ msgstr "Fisiere detectate"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Fisiere de pastrat cand se rescrie firmware-ul"
-
-#~ msgid "General"
-#~ msgstr "General"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Aici poti configura setarile si functionalitatea interfetei web <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "<abbr title=\"User Interface\">Interfata</abbr> web"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Optiuni aditionale pentru pppd"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Deconectare automata"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Configureaza serverul local de DNS sa foloseasca serverele de domeniu "
-#~ "anuntate la conexiunea PPP"
-
-#~ msgid "Connect script"
-#~ msgstr "Script de conectare"
-
-#~ msgid "Default"
-#~ msgstr "Implicit"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Script pentru deconectare"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Editeaza lista de pachete si destinatiile de instalare"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "Activeaza 4 mii de VLAN-uri"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Activeaza IPv6 pe legatura PPP"
-
-#~ msgid "Firmware image"
-#~ msgstr "Imaginea de firmware"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Aici poti face backup si restore la configuratia routerului si daca e "
-#~ "posibil chiar resetarea routerului la modul implicit."
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Pastreaza fisierele de configurare"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid "Kernel"
-#~ msgstr "Kernel"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "PPPD va inlocui ruta default cu cea oferita de interfata PPP dupa "
-#~ "conectarea cu succes"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "PPPD va rula acest script dupa stabilirea conexiunii PPP"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "PPPD va rula acest script inainte sa inchida conexiunea PPP"
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "Numarul de teste de conexiune esuate pentru a reconecta"
-
-#~ msgid "Override Gateway"
-#~ msgstr "Suprascrie gateway"
-
-#~ msgid "PIN code"
-#~ msgstr "Codul PIN"
-
-#~ msgid "PPP Settings"
-#~ msgstr "Setari PPP"
-
-#~ msgid "Package lists"
-#~ msgstr "Lista de pachete"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Continua anuland toate modificarile facute si resetand la default?"
-
-#~ msgid "Processor"
-#~ msgstr "Procesor"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Portul radiusului"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Serverul radius"
-
-#~ msgid "Replace default route"
-#~ msgstr "Inlocuieste ruta default"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Reseteaza routerul la default"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr ""
-#~ "Numarul de secunde de asteptat ca modemul sa devine pregatit inainte de "
-#~ "conectare"
-
-#~ msgid "Send Router Solicitiations"
-#~ msgstr "Trimite solicitari de Router"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "Adresa IPv4 a serverului"
-
-#~ msgid "Service type"
-#~ msgstr "Tipul de serviciu"
-
-#~ msgid "Settings"
-#~ msgstr "Setari"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "Setarile de tunel"
-
-#~ msgid "Update package lists"
-#~ msgstr "Updateaza lista de pachete"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Uploadeaza o imagine OpenWRT pentru rescrierea firmware-ului."
-
-#~ msgid "Upload image"
-#~ msgstr "Uploadeaza firmware"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Foloseste DNS-urile primite pe conexiune"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid "back"
-#~ msgstr "inapoi"
-
-#~ msgid "static"
-#~ msgstr "static"
diff --git a/po/ro/commands.po b/po/ro/commands.po
deleted file mode 100644
index 2b3a72b..0000000
--- a/po/ro/commands.po
+++ /dev/null
@@ -1,99 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-01 16:07+0200\n"
-"Last-Translator: cgherman <cgherman@mandrivausers.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-"Permite executarea comenzii si descarcarea rezultatului fara o autentificare "
-"anterioara"
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr "Permite utilizatorului sa adauge parametrii in linia de comanda"
-
-msgid "Arguments:"
-msgstr "Parametrii:"
-
-msgid "Binary data not displayed, download instead."
-msgstr "Datele binare nu sunt afisate, descarcale in schimb"
-
-msgid "Code:"
-msgstr "Cod:"
-
-msgid "Collecting data..."
-msgstr "Aduna date..."
-
-msgid "Command"
-msgstr "Comanda"
-
-msgid "Command failed"
-msgstr "Comanda esuata"
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr "Comanda reusita"
-
-msgid "Command:"
-msgstr "Comanda:"
-
-msgid "Configure"
-msgstr "Configureaza"
-
-msgid "Custom Commands"
-msgstr "Comenzi particulare"
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr "Dashboard"
-
-msgid "Description"
-msgstr "Descriere"
-
-msgid "Download"
-msgstr "Descarca"
-
-msgid "Failed to execute command!"
-msgstr "S-a esuat executarea comenzii!!"
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr "Se incarca"
-
-msgid "Public access"
-msgstr "Access public"
-
-msgid "Run"
-msgstr "Ruleaza"
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-"Aceasta pagina permite configurarea de comenzi personale ce pot fi usor "
-"apelate din interfata grafica"
-
-msgid "Waiting for command to complete..."
-msgstr "Astept finalizarea comenzii..."
diff --git a/po/ro/coovachilli.po b/po/ro/coovachilli.po
deleted file mode 100644
index 03104c3..0000000
--- a/po/ro/coovachilli.po
+++ /dev/null
@@ -1,27 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-01 15:57+0200\n"
-"Last-Translator: cgherman <cgherman@mandrivausers.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Configurare retea"
-
-msgid "RADIUS configuration"
-msgstr "Configurare RADIUS"
-
-msgid "UAM and MAC Authentication"
-msgstr "Autentificare UAM si MAC"
diff --git a/po/ro/ddns.po b/po/ro/ddns.po
deleted file mode 100644
index cade2fb..0000000
--- a/po/ro/ddns.po
+++ /dev/null
@@ -1,92 +0,0 @@
-# Generated from applications/luci-ddns/luasrc/model/cbi/ddns/ddns.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-12-01 15:59+0200\n"
-"Last-Translator: cgherman <cgherman@mandrivausers.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "Verifica pentru adresa IP schimbata la fiecare"
-
-msgid "Check-time unit"
-msgstr "Unitatea de verificare timp"
-
-msgid "Custom update-URL"
-msgstr "Adresa particularizata de actualizare"
-
-msgid "Dynamic DNS"
-msgstr "DNS dinamic"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"DNS-ul dinamic permite accesarea routerului printr-un nume dns fix legat de "
-"adresa dinamic IP."
-
-msgid "Enable"
-msgstr "Activeaza"
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "Forteaza actualizarea la fiecare"
-
-msgid "Force-time unit"
-msgstr "Unitatea de timp la fortare actualizare"
-
-msgid "Hostname"
-msgstr "Nume host"
-
-msgid "Interface"
-msgstr "Interfata"
-
-msgid "Network"
-msgstr "Retea"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "Pe care interfata trebuie sa porneasca scriptul ddns"
-
-msgid "Password"
-msgstr "Parola"
-
-msgid "Service"
-msgstr "Serviciu"
-
-msgid "Source of IP address"
-msgstr "Sursa adresei IP"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Utilizator"
-
-msgid "custom"
-msgstr "particularizat"
-
-# Hours
-msgid "h"
-msgstr "ore"
-
-msgid "interface"
-msgstr "interfata"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "minut(e)"
-
-msgid "network"
-msgstr "retea"
diff --git a/po/ro/diag_core.po b/po/ro/diag_core.po
deleted file mode 100644
index 81dbd1d..0000000
--- a/po/ro/diag_core.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 00:45+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configure Diagnostics"
-msgstr "Configureaza diagnosticurile"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Intrarile din acest menu permit utilizarea testelor de diagnostic pe sistem "
-"pentru ajutor la probleme."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Cu acest menu poti configura diagnosticuri pe retea cum ar fi scanarea unor "
-"dispozitive sau teste ping."
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d_diag"
diff --git a/po/ro/diag_devinfo.po b/po/ro/diag_devinfo.po
deleted file mode 100644
index a1cf113..0000000
--- a/po/ro/diag_devinfo.po
+++ /dev/null
@@ -1,210 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 00:53+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr "Adauga"
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr "Configureaza scanarea telefonului"
-
-msgid "Configure"
-msgstr "Configureaza"
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr "Sterge"
-
-msgid "Device Scan Config"
-msgstr "Configureaza scanarea dispozitivului"
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Dispozitive descoperite pentru"
-
-msgid "Devices on Network"
-msgstr "Dispozitive in retea"
-
-msgid "Edit"
-msgstr "Editeaza"
-
-msgid "Enable"
-msgstr "Activeaza"
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr "Adresa IP"
-
-msgid "Interface"
-msgstr "Interfata"
-
-msgid "Invalid"
-msgstr "Invalid"
-
-msgid "Link to Device"
-msgstr "Legatura spre dispozitiv"
-
-msgid "MAC Address"
-msgstr "Adresa MAC"
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Milisecunde de asteptare intre cereri (100 implicit)"
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr "Nume"
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr "Nici un device SIP"
-
-msgid "No devices detected"
-msgstr "Nici un dispozitiv detectat"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Numarul de trimiteri cereri (1 implicit)"
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr "Informatii despre telefon"
-
-msgid "Phone Scan"
-msgstr "Scanare telefon"
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr "Telefoane"
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr "Numarul de repetitii"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr "Informatii despre dispozitivul SIP"
-
-msgid "SIP Device Scan"
-msgstr "Scanare dispozitiv SIP"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Configurarea scanarii dispozitivului SIP"
-
-msgid "SIP Devices on Network"
-msgstr "Dispozitive SIP in retea"
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr "Pauza dintre cereri"
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Timpul de asteptare pentru raspunsuri in secunde (10 implicit)"
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr "verifica alte retele"
diff --git a/po/ro/ffwizard.po b/po/ro/ffwizard.po
deleted file mode 100644
index a79494e..0000000
--- a/po/ro/ffwizard.po
+++ /dev/null
@@ -1,165 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:38+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr "Configureaza reteaua"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP va aloca automat adrese ip la clienti"
-
-msgid "DNS Server"
-msgstr "Server DNS"
-
-msgid "Enable DHCP"
-msgstr "Activeaza DHCP"
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr "Adresa IP"
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr "Limiteaza viteza de download"
-
-msgid "Limit upload bandwidth"
-msgstr "Limiteaza viteza de upload"
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr "Parola"
-
-msgid "Password confirmation"
-msgstr "Confirmarea de parola"
-
-msgid "Password successfully changed"
-msgstr "Parola schimbata cu succes"
-
-msgid "Protect LAN"
-msgstr "Protejeaza reteaua locala LAN"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Bifeaza aici pentru a configura interfetele de retea."
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Selecteaza aici pentru a permite altora sa-ti foloseasca legatura ta de "
-"Internet."
-
-msgid "Share your internet connection"
-msgstr "Partajeaza cu altii conexiunea ta de Internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr "Eroare necunoscuta"
-
-msgid "Username"
-msgstr "Utilizator"
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr "Configureaza aceasta interfata"
-
-msgid "recommended"
-msgstr "recomandat"
-
-msgid "Basic settings"
-msgstr "Setari de baza"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr "Eroare"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/ro/firewall.po b/po/ro/firewall.po
deleted file mode 100644
index 133c36e..0000000
--- a/po/ro/firewall.po
+++ /dev/null
@@ -1,500 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:33+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr "Actiune"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr "Setari avansate"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Permite trecerea din <em>zonele sursa</em>."
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Permite trecerea catre <em>zonele sursa</em>."
-
-msgid "Any"
-msgstr "Oricare"
-
-msgid "Covered networks"
-msgstr "Retele acoperite"
-
-msgid "Custom Rules"
-msgstr "Reguli suplimentare"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr "Adresa destinatie"
-
-msgid "Destination port"
-msgstr "Portul destinatie"
-
-msgid "Destination zone"
-msgstr "Zona destinatie"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr "Descarca pachetele invalide"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr "Activeaza loopback NAT"
-
-msgid "Enable SYN-flood protection"
-msgstr "Activeaza protectia SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr "Activeaza log in aceasta zona"
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr "Port extern"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr "Setari zona la firewall"
-
-msgid "Force connection tracking"
-msgstr "Forteaza urmarirea conexiunilor"
-
-msgid "Forward"
-msgstr "Forward"
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Setari generale"
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 si IPv6"
-
-msgid "IPv4 only"
-msgstr "doar IPv4"
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr "doar IPv6"
-
-msgid "Input"
-msgstr "Input"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Forwardare intre-zone"
-
-msgid "Internal IP address"
-msgstr "Adresa IP interna"
-
-msgid "Internal port"
-msgstr "Port intern"
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr "Limiteaza mesaje in log"
-
-msgid "MSS clamping"
-msgstr "Ajustare MSS"
-
-msgid "Masquerading"
-msgstr "Translatare"
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr "Potriveste pe tipul de ICMP"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr "Nume"
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr "Output"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-msgid "Source IP address"
-msgstr "Adresa IP sursa"
-
-msgid "Source MAC address"
-msgstr "Adresa MAC sursa"
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr "Adresa sursa"
-
-msgid "Source port"
-msgstr "Port sursa"
-
-msgid "Source zone"
-msgstr "Zona sursa"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr "Zona %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr "Zone"
-
-msgid "accept"
-msgstr "accept"
-
-msgid "any"
-msgstr "oricare"
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr ""
-
-#~ msgid "Destination"
-#~ msgstr "Destinatie"
-
-#~ msgid "Family"
-#~ msgstr "Familia proto"
-
-#~ msgid "Source"
-#~ msgstr "Sursa"
-
-#~ msgid "Via"
-#~ msgstr "Prin"
-
-#~ msgid "(optional)"
-#~ msgstr "(optional)"
-
-#~ msgid "Intended destination address"
-#~ msgstr "Adresa destinatie intentionata"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Port intern (optional)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Optiuni avansate"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Reguli avansate"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Regulile avansate iti permit particularizarea firewall-ului dupa nevoi. "
-#~ "Numai conexiunile noi vor fi luate in calcul. Pachetele care apartin unor "
-#~ "conexiuni deja stabilite trec deja prin firewall."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Reguli suplimentare (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Dispozitiv"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "Pentru DNAT, leaga traficul venit redirectat catre destinatia IP. Pentru "
-#~ "SNAT rescrie adresa sursa ca fiind adresa IP."
-
-#~ msgid "Overview"
-#~ msgstr "Sumar"
-
-#~ msgid "Port forwarding"
-#~ msgstr "Forwardare catre port"
-
-#~ msgid "Redirection type"
-#~ msgstr "Tipul de redirectare"
-
-#~ msgid "Redirections"
-#~ msgstr "Redirectari"
-
-#~ msgid "Rules"
-#~ msgstr "Reguli"
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Redirectarea traficului"
diff --git a/po/ro/freifunk-policyrouting.po b/po/ro/freifunk-policyrouting.po
deleted file mode 100644
index f1432d6..0000000
--- a/po/ro/freifunk-policyrouting.po
+++ /dev/null
@@ -1,51 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/ro/freifunk.po b/po/ro/freifunk.po
deleted file mode 100644
index 2e7e311..0000000
--- a/po/ro/freifunk.po
+++ /dev/null
@@ -1,387 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/ro/hd_idle.po b/po/ro/hd_idle.po
deleted file mode 100644
index 8ef8bff..0000000
--- a/po/ro/hd_idle.po
+++ /dev/null
@@ -1,53 +0,0 @@
-# Generated from applications/luci-hd-idle/luasrc/model/cbi/hd_idle.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2011-10-07 16:40+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Disk"
-msgstr "Disc"
-
-msgid "Enable"
-msgstr "Activeaza"
-
-msgid "Enable debug"
-msgstr "Activeaza informatii suplimentare de tip \"debug\""
-
-msgid "Idle-time"
-msgstr "Timp de inactivitate"
-
-msgid "Idle-time unit"
-msgstr "Unitatea de timp pentru masurarea inactivitatii"
-
-msgid "Settings"
-msgstr "Setari"
-
-# Hours
-msgid "h"
-msgstr "ore"
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle este un utilitar pentru a oprit din rotatie hard disc-urile externe "
-"dupa o anumita perioada de inactivitate."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "minute"
diff --git a/po/ro/meshwizard.po b/po/ro/meshwizard.po
deleted file mode 100644
index 1a6d15f..0000000
--- a/po/ro/meshwizard.po
+++ /dev/null
@@ -1,126 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:15+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "Canal"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Bifeaza aici sa-ti protejezi reteaua locala LAN de alte noduri sau clienti"
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr "Configureaza aceasta interfata"
-
-msgid "DHCP IP range"
-msgstr "Plaja de adrese IP DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP va aloca automat adrese IP la clienti"
-
-msgid "Enable DHCP"
-msgstr "Activeaza DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Setari generale"
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interfete"
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr "Protejeaza reteaua locala LAN"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Selecteaza aici ca sa permiti si altora sa-ti foloseasca si ei conexiunea ta "
-"de Internet."
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr "Partajeaza cu altii conexiunea ta de Internet"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr "recomandat"
diff --git a/po/ro/minidlna.po b/po/ro/minidlna.po
deleted file mode 100644
index ac227dd..0000000
--- a/po/ro/minidlna.po
+++ /dev/null
@@ -1,165 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/ro/mmc_over_gpio.po b/po/ro/mmc_over_gpio.po
deleted file mode 100644
index ad5b898..0000000
--- a/po/ro/mmc_over_gpio.po
+++ /dev/null
@@ -1,42 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:41+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "Setari"
diff --git a/po/ro/multiwan.po b/po/ro/multiwan.po
deleted file mode 100644
index fcba219..0000000
--- a/po/ro/multiwan.po
+++ /dev/null
@@ -1,119 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:43+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr "Servere DNS"
-
-msgid "Default Route"
-msgstr "Ruta default"
-
-msgid "Destination Address"
-msgstr "Adresa destinatie"
-
-msgid "Disable"
-msgstr "Dezactiveaza"
-
-msgid "Enable"
-msgstr "Activeaza"
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr "Porturi"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr "Adresa sursei"
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr "Interfete WAN"
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/ro/ntpc.po b/po/ro/ntpc.po
deleted file mode 100644
index 893419f..0000000
--- a/po/ro/ntpc.po
+++ /dev/null
@@ -1,56 +0,0 @@
-# Generated from applications/luci-ntpc/luasrc/model/cbi/ntpc/*.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-12-01 16:08+0200\n"
-"Last-Translator: cgherman <cgherman@mandrivausers.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "Ajustarea ceasului"
-
-msgid "Count of time measurements"
-msgstr "Masuratori de timp"
-
-msgid "Current system time"
-msgstr "Timpul curent de sistem"
-
-msgid "General"
-msgstr "General"
-
-msgid "Hostname"
-msgstr "Numele de host"
-
-msgid "Offset frequency"
-msgstr "Frecventa de offset"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "Sincronizeaza timpul sistemului"
-
-msgid "Time Server"
-msgstr "Server de timp"
-
-msgid "Time Servers"
-msgstr "Serverele de timp"
-
-msgid "Time Synchronisation"
-msgstr "Sincronizarea de timp"
-
-msgid "Update interval (in seconds)"
-msgstr "Intervalul de actualizare (in secunde)"
-
-msgid "empty = infinite"
-msgstr "gol = infinit"
diff --git a/po/ro/olsr.po b/po/ro/olsr.po
deleted file mode 100644
index 04cf61f..0000000
--- a/po/ro/olsr.po
+++ /dev/null
@@ -1,577 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/ro/openvpn.po b/po/ro/openvpn.po
deleted file mode 100644
index 9c3be89..0000000
--- a/po/ro/openvpn.po
+++ /dev/null
@@ -1,548 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/ro/p2pblock.po b/po/ro/p2pblock.po
deleted file mode 100644
index 2f7d74e..0000000
--- a/po/ro/p2pblock.po
+++ /dev/null
@@ -1,44 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 17:09+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Block Time"
-msgstr "Durata de blocare"
-
-msgid "Enable P2P-Block"
-msgstr "Activeaza blocarea P2P"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Protocoale Layer7"
-
-msgid "P2P-Block"
-msgstr "Blocare P2P"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"Blocarea P2P este un mecanism de blocare a diferitelor protocoale pentru "
-"clienti necunoscuti."
-
-msgid "Portrange"
-msgstr "Gama de porturi"
-
-msgid "Whitelisted IPs"
-msgstr "Adrese IP de incredere"
-
-msgid "seconds"
-msgstr "secunde"
diff --git a/po/ro/p910nd.po b/po/ro/p910nd.po
deleted file mode 100644
index 8f00b25..0000000
--- a/po/ro/p910nd.po
+++ /dev/null
@@ -1,39 +0,0 @@
-#  p910nd.pot
-#  generated from ./applications/luci-p910nd/luasrc/i18n/p910nd.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Bidirectional mode"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr ""
diff --git a/po/ro/pbx-voicemail.po b/po/ro/pbx-voicemail.po
deleted file mode 100644
index 42b66f6..0000000
--- a/po/ro/pbx-voicemail.po
+++ /dev/null
@@ -1,89 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/ro/pbx.po b/po/ro/pbx.po
deleted file mode 100644
index 39a8cb3..0000000
--- a/po/ro/pbx.po
+++ /dev/null
@@ -1,450 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/ro/polipo.po b/po/ro/polipo.po
deleted file mode 100644
index 7c0b668..0000000
--- a/po/ro/polipo.po
+++ /dev/null
@@ -1,203 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/ro/qos.po b/po/ro/qos.po
deleted file mode 100644
index 8bb7514..0000000
--- a/po/ro/qos.po
+++ /dev/null
@@ -1,104 +0,0 @@
-# Generated from applications/luci-qos/luasrc/model/cbi/qos/qos.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2010-03-25 22:10+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/ro/radvd.po b/po/ro/radvd.po
deleted file mode 100644
index 77e3d9e..0000000
--- a/po/ro/radvd.po
+++ /dev/null
@@ -1,384 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:12+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "6to4 interface"
-msgstr "Interfata 6la4"
-
-msgid "Address"
-msgstr "Adresa"
-
-msgid "Addresses"
-msgstr "Adrese"
-
-msgid "Advanced"
-msgstr "Avansat"
-
-msgid "Advertise Home Agent flag"
-msgstr "Anunta semaforul \"Home Agent\""
-
-msgid "Advertise router address"
-msgstr "Anunta adresa routerului"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Sufixe anuntate de domeniu"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"Server RDNSS IPv6 anuntat. Daca e lasat gol, atunci adresa IPv6 a interfetei "
-"este folosita"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Prefixe IPv6 anuntate"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Prefixe IPv6 anuntate. Daca e neconfigurat atunci prefixul de pe interfata "
-"curenta este folosit"
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "Anunta capabilitatea de \"Home Agent\" IPv6 mobil (RFC3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr "Anunta capacitatea de inregistrare \"Mobile Router\""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr "Anunta preferinta routerului implicit"
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr "Anunta"
-
-msgid "Autonomous"
-msgstr "Autonom"
-
-msgid "Clients"
-msgstr "Clienti"
-
-msgid "Configuration flag"
-msgstr "Semafor de configurare"
-
-msgid "Current hop limit"
-msgstr "Limita hop-ului curent"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "Configurarea DNSSL"
-
-msgid "Default lifetime"
-msgstr "Durata implicita"
-
-msgid "Default preference"
-msgstr "Preferinta implicita"
-
-msgid "Enable"
-msgstr "Activeaza"
-
-msgid "Enable advertisements"
-msgstr "Activeaza anunturile"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "Activeaza anunturile si solicitarile routerului"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr "Informatia despre \"Home Agent\""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr "Preferinta \"Home Agent\""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr "Interfata"
-
-msgid "Interface Configuration"
-msgstr "Configurarea interfetei"
-
-msgid "Interface required"
-msgstr "Interfata necesara"
-
-msgid "Interfaces"
-msgstr "Interfete"
-
-msgid "Lifetime"
-msgstr "Durata de viata"
-
-msgid "Link MTU"
-msgstr "MTU pe legatura"
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr "Interval maxim"
-
-msgid "Maximum advertisement interval"
-msgstr "Intervalul maxim de anuntare"
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr "IPv6 mobil"
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr "Multicast"
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr "Preferinta"
-
-msgid "Preferred lifetime"
-msgstr "Durata de viata preferata"
-
-msgid "Prefix"
-msgstr "Prefix"
-
-msgid "Prefix Configuration"
-msgstr "Configurarea prefixului"
-
-msgid "Prefixes"
-msgstr "Prefixe"
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr "Configurarea rutelor"
-
-msgid "Routes"
-msgstr "Rute"
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr "Sufix"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr "Doar unicast"
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr "nu"
-
-msgid "yes"
-msgstr "da"
-
-#~ msgid "Advertised IPv6 prefix"
-#~ msgstr "Prefixul IPv6 anuntat"
-
-#~ msgid ""
-#~ "Advertised IPv6 prefix. If empty, the current interface prefix is used"
-#~ msgstr ""
-#~ "Prefixul IPv6 anuntat. Daca e lasat gol atunci prefixul de pe interfata "
-#~ "curenta este folosit"
diff --git a/po/ro/rrdtool.po b/po/ro/rrdtool.po
deleted file mode 100644
index 1bd24a8..0000000
--- a/po/ro/rrdtool.po
+++ /dev/null
@@ -1,357 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/ro/samba.po b/po/ro/samba.po
deleted file mode 100644
index 4bc3415..0000000
--- a/po/ro/samba.po
+++ /dev/null
@@ -1,82 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 17:16+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Permite oaspeti"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Permite utilizatorii de sistem sa acceseze directoarele lor peste "
-"partajarile de retea"
-
-msgid "Allowed users"
-msgstr "Utilizatori acceptati"
-
-msgid "Create mask"
-msgstr "Creaza masca"
-
-msgid "Description"
-msgstr "Descriere"
-
-msgid "Directory mask"
-msgstr "Masca director"
-
-msgid "Edit Template"
-msgstr "Editeaza sablon"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Editeaza sablonul care e folosit pentru generarea configuratiei samba."
-
-msgid "General Settings"
-msgstr "Setari generale"
-
-msgid "Hostname"
-msgstr "Numele de host"
-
-msgid "Mask for new directories"
-msgstr "Masca pentru directoarele noi"
-
-msgid "Mask for new files"
-msgstr "Masca pentru fisierele noi"
-
-msgid "Name"
-msgstr "Nume"
-
-msgid "Network Shares"
-msgstr "Partajari pe retea"
-
-msgid "Path"
-msgstr "Cale"
-
-msgid "Read-only"
-msgstr "Doar citire"
-
-msgid "Share home-directories"
-msgstr "Partajeaza directoarele proprii"
-
-msgid "Shared Directories"
-msgstr "Directoare partajate"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Acesta este continutul fisierului '/etc/samba/smb.conf.template' din care se "
-"genereaza configuratia samba. Valorile dintre liniuta verticala ('|') n-ar "
-"trebui schimbate, ele iau valorile direct din tab-ul de \"Setari generale\"."
-
-msgid "Workgroup"
-msgstr "Workgroup"
diff --git a/po/ro/splash.po b/po/ro/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/ro/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/ro/statistics.po b/po/ro/statistics.po
deleted file mode 100644
index ff5d564..0000000
--- a/po/ro/statistics.po
+++ /dev/null
@@ -1,604 +0,0 @@
-#  statistics.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/statistics.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 17:27+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr "Directorul de baza"
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr "Configurarea pluginului CPU"
-
-msgid "CSV Output"
-msgstr "Afisarea CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Configurarea pluginului CVS"
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Setarile Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd e un serviciu mic pentru colectarea de date din diferite surse prin "
-"diferite pluginuri. In aceasta pagina poti schimba setarile generale pentru "
-"Collectd."
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr "Intervalul de colectare date"
-
-msgid "Datasets definition file"
-msgstr "Fisierul de definitii dataseturi"
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr "Directorul pentru pluginurile collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Directorul pentru sub-configuratii"
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr "Utilizarea spatiului pe disc"
-
-msgid "Disk Usage"
-msgstr "Utilizarea discului"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr "Grafice"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Numele de host"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Interfete"
-
-msgid "Interrupts"
-msgstr "Intreruperi"
-
-msgid "Interval for pings"
-msgstr "Interval pentru ping"
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr "Legatura de retea"
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr "Retea"
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr "Pluginuri de retea"
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr "Numarul de threaduri pentru colectarea datelor"
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr "Pluginuri de iesire"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Procese"
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Procesor"
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Secunde"
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr "Incarcarea de sistem"
-
-msgid "System plugins"
-msgstr "Pluginuri de sistem"
-
-msgid "TCP Connections"
-msgstr "Conexiuni TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-"Pluginul pentru CPU colecteaza statistici de baza despre utilizarea "
-"procesorului."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Incearca sa rezolvi numele de domeniu complet"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr "Fisierul pentru PID folosit"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/ro/tinyproxy.po b/po/ro/tinyproxy.po
deleted file mode 100644
index 799fecb..0000000
--- a/po/ro/tinyproxy.po
+++ /dev/null
@@ -1,256 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/ro/transmission.po b/po/ro/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/ro/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/ro/upnp.po b/po/ro/upnp.po
deleted file mode 100644
index f18c54e..0000000
--- a/po/ro/upnp.po
+++ /dev/null
@@ -1,152 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 17:03+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"ACL-urile specifica porturile externe care pot fi redirectate si spre ce "
-"adrese si porturi interne"
-
-msgid "Action"
-msgstr "Actiune"
-
-msgid "Active UPnP Redirects"
-msgstr "Redirecturi active UPnP"
-
-msgid "Advanced Settings"
-msgstr "Setari avansate"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "Permite adaugarea forward-urilor doar catre adresele ip solicitante"
-
-msgid "Announced model number"
-msgstr "Numar de model anuntat"
-
-msgid "Announced serial number"
-msgstr "Numar serial anuntat"
-
-msgid "Clean rules interval"
-msgstr "Intervalul de curatare reguli"
-
-msgid "Clean rules threshold"
-msgstr "Limita de curatare reguli"
-
-msgid "Client Address"
-msgstr "Adresa client"
-
-msgid "Client Port"
-msgstr "Port client"
-
-msgid "Collecting data..."
-msgstr "Colecteaza date.."
-
-msgid "Comment"
-msgstr "Comentariu"
-
-msgid "Delete Redirect"
-msgstr "Sterge redirect"
-
-msgid "Device UUID"
-msgstr "UUID al dispozitivului"
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Activeaza functionalitatea NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Activeaza functionalitatea UPnP"
-
-msgid "Enable additional logging"
-msgstr "Activeaza log-area aditionala"
-
-msgid "Enable secure mode"
-msgstr "Activeaza modul securizat"
-
-msgid "External Port"
-msgstr "Port extern"
-
-msgid "External ports"
-msgstr "Porturi externe"
-
-msgid "General Settings"
-msgstr "Setari generale"
-
-msgid "Internal addresses"
-msgstr "Adrese interne"
-
-msgid "Internal ports"
-msgstr "Porturi interne"
-
-msgid "MiniUPnP ACLs"
-msgstr "Liste de acces mini UPnP"
-
-msgid "MiniUPnP settings"
-msgstr "Setari mini UPnP"
-
-msgid "Notify interval"
-msgstr "Interval de notificare"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Presentation URL"
-msgstr "Adresa de prezentare"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Pune informatii utile suplimentare in log-ul de sistem"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Raporteaza timpul de functionare de sistem in loc de serviciu"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Porneste UPnP si serviciul NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Nu exista redirecturi active."
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPNP permite clientulor din reteaua locala sa configureze automat routerul."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPNP permite clientulor din reteaua locala sa configureze automat routerul."
-
-msgid "UPnP lease file"
-msgstr "Fisierul de conexiuni UPnP"
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Valorea in KOcteti/s , doar informational"
-
-msgid "enable"
-msgstr "activeaza"
diff --git a/po/ro/ushare.po b/po/ro/ushare.po
deleted file mode 100644
index 17622a0..0000000
--- a/po/ro/ushare.po
+++ /dev/null
@@ -1,51 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:53+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Content directories"
-msgstr "Directoarele de continut"
-
-msgid "Disable telnet console"
-msgstr "Dezactiveaza consola telnet"
-
-msgid "Disable webinterface"
-msgstr "Dezactiveaza interfata web"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "Optiuni"
-
-msgid "Servername"
-msgstr "Numele serverului"
-
-msgid "Settings"
-msgstr "Setari"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/ro/uvc_streamer.po b/po/ro/uvc_streamer.po
deleted file mode 100644
index d6f43c2..0000000
--- a/po/ro/uvc_streamer.po
+++ /dev/null
@@ -1,44 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:52+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Frame pe secunda"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Rezolutie"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Setari"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Emisie webcam"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Configureaza-ti webcamul compatibil Linux-UC. Pointeaza browserul catre <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a> de exemplu"
diff --git a/po/ro/vnstat.po b/po/ro/vnstat.po
deleted file mode 100644
index 093182b..0000000
--- a/po/ro/vnstat.po
+++ /dev/null
@@ -1,69 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:01+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Configuration"
-msgstr "Configurare"
-
-msgid "Daily traffic"
-msgstr "Trafic zilnic"
-
-msgid "Graphs"
-msgstr "Grafice"
-
-msgid "Hourly traffic"
-msgstr "Trafic la fiecare ora"
-
-msgid "Monitor selected interfaces"
-msgstr "Monitorizeaza interfetele selectate"
-
-msgid "Monthly traffic"
-msgstr "Trafic lunar"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Nu a fost setata nici o baza de date. La configurarea VnStat se poate activa "
-"monitoriza pentru una sau mai multe interfete."
-
-msgid "Restart VnStat"
-msgstr "Restarteaza VnStat"
-
-msgid "Summary display"
-msgstr "Afiseaza sumarul"
-
-msgid "Top 10 display"
-msgstr "Afiseaza top 10"
-
-msgid "Update »"
-msgstr "Updateaza »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Graficele VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Monitorul de trafic VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"Vnstat este un monitor de retea ce pastreaza detalii legate de traficul pe "
-"interfetele selectate."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "Serviciul VnStat a fost restartat."
diff --git a/po/ro/voice_core.po b/po/ro/voice_core.po
deleted file mode 100644
index c7054ff..0000000
--- a/po/ro/voice_core.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:51+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Phones"
-msgstr "Telefoane"
-
-msgid "Voice"
-msgstr ""
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/ro/voice_diag.po b/po/ro/voice_diag.po
deleted file mode 100644
index e6ee682..0000000
--- a/po/ro/voice_diag.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-10-07 16:50+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Diagnostics"
-msgstr "Diagnosticuri"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Diagnosticurile disponibile pe dispozitivul tau depind de modulele instalate."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"In acest menu sunt optiuni care-ti permit sa configurezi si sa testezi "
-"diferite operatiuni de voce pe sistemul tau. Acestea sunt denumite "
-"diagnostice."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/ro/watchcat.po b/po/ro/watchcat.po
deleted file mode 100644
index f77a9e4..0000000
--- a/po/ro/watchcat.po
+++ /dev/null
@@ -1,54 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2;\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/ro/wol.po b/po/ro/wol.po
deleted file mode 100644
index 26946e3..0000000
--- a/po/ro/wol.po
+++ /dev/null
@@ -1,56 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2011-10-07 16:47+0200\n"
-"Last-Translator: Daniel <daniel.petre@pitesti.rcs-rds.ro>\n"
-"Language-Team: none\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < "
-"20)) ? 1 : 2);;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Broadcast pe toate interfetele"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Alege statie pentru \"trezire\" sau introdu o adresa MAC de folosit"
-
-msgid "Host to wake up"
-msgstr "Statie pentru \"trezire\""
-
-msgid "Network interface to use"
-msgstr "Interfata de retea pentru utilizare"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Uneori doar una dintre metode functioneaza. Daca se intampla, incearc-o pe "
-"cealalta"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Specifica interfata prin care pachetele WoL sunt trimise"
-
-msgid "Starting WoL utility:"
-msgstr "Pornire utilitar WoL:"
-
-msgid "Wake on LAN"
-msgstr "Activarea pe LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Activarea pe LAN e un mecanism pentru a porni de la distanta computere de pe "
-"retea."
-
-msgid "Wake up host"
-msgstr "Statie de \"trezire\""
-
-msgid "WoL program"
-msgstr "Program WoL"
diff --git a/po/ro/wshaper.po b/po/ro/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/ro/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/ru/ahcp.po b/po/ru/ahcp.po
deleted file mode 100644
index e8fb86b..0000000
--- a/po/ru/ahcp.po
+++ /dev/null
@@ -1,119 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: ahcp\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 15:30+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-# Ad-Hoc Configuration Protocol - протокол автоматической конфигурации IPv6 и сетей IPv6/IPv4 двойного стека
-msgid "AHCP Server"
-msgstr "AHCP-сервер"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP - это протокол автоматической конфигурации сетей IPv6 и IPv6/IPv4, "
-"разработанный для использования вместо DHCP и протоколов обнаружения "
-"маршрутизаторов в сетях, где сложно или невозможно настроить сервер внутри "
-"каждой широковещательной зоны канального уровня, например, в мобильных ad-"
-"hoc сетях."
-
-msgid "Active AHCP Leases"
-msgstr "Активные арендованные AHCP-адреса"
-
-msgid "Address"
-msgstr "Адрес"
-
-msgid "Advanced Settings"
-msgstr "Дополнительные настройки"
-
-msgid "Age"
-msgstr "Возраст"
-
-msgid "Announced DNS servers"
-msgstr "Анонсируемые DNS-серверы"
-
-msgid "Announced NTP servers"
-msgstr "Анонсируемые NTP-серверы"
-
-msgid "Announced prefixes"
-msgstr "Анонсируемые префиксы"
-
-msgid "Collecting data..."
-msgstr "Сбор данных..."
-
-#, fuzzy
-msgid "Forwarder"
-msgstr "Перенаправление запросов"
-
-msgid "General Setup"
-msgstr "Общие настройки"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 и IPv6"
-
-msgid "IPv4 only"
-msgstr "Только IPv4"
-
-msgid "IPv6 only"
-msgstr "Только IPv6"
-
-msgid "Lease directory"
-msgstr "Директория арендованных адресов"
-
-msgid "Lease validity time"
-msgstr "Срок действия аренды"
-
-msgid "Log file"
-msgstr "Файл журнала"
-
-msgid "Multicast address"
-msgstr "Групповой адрес"
-
-msgid "Operation mode"
-msgstr "Режим работы"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Protocol family"
-msgstr "Протокол"
-
-msgid "Served interfaces"
-msgstr "Используемые интерфейсы"
-
-msgid "Server"
-msgstr "Сервер"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Определяет IPv4 и IPv6 NTP-серверы"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Определяет IPv4 и IPv6 DNS-серверы"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr "Определяет IPv4- и IPv6-префиксы сети в нотации CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr "Служба AHCP не запущена."
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "Служба AHCP запущена с ID %s."
-
-msgid "There are no active leases."
-msgstr "Нет активных арендованных адресов."
-
-msgid "Unique ID file"
-msgstr "Файл уникального идентификатора"
diff --git a/po/ru/asterisk.po b/po/ru/asterisk.po
deleted file mode 100644
index acedb82..0000000
--- a/po/ru/asterisk.po
+++ /dev/null
@@ -1,515 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-04-02 15:02+0200\n"
-"Last-Translator: Kamal <kamal.aliev@epscom.ru>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Общие настройки Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "Каталог AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Кэшировать звуковые файлы во время записи"
-
-#~ msgid "Debug Level"
-#~ msgstr "Уровень отладки"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Отключить некоторые предупреждения"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Сохранять дамп ядра при фатальной ошибке"
-
-#~ msgid "High Priority"
-#~ msgstr "Высокий приоритет"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Включить шифрование"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Использовать внутренние тайминги"
-
-#~ msgid "Log directory"
-#~ msgstr "Каталог файлов журнала"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Максимальное разрешённое количество вызовов"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Максимальная нагрузка для запрета приёма новых вызовов"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Выключить цвета консоли"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Каталог кэша звуковых файлов"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Группа, от имени которой запускать"
-
-#~ msgid "The User to run as"
-#~ msgstr "Пользователь, от имени которого запускать"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Добавлять имя системы к уникальному идентификатору (UID)"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Передавать тишину в формате SLINEAR при записи канала"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Раздел правил набора"
-
-#~ msgid "include"
-#~ msgstr "включить"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Раcширение правила набора"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Общие настройки правил набора"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Разрешить перевод"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Очистить глобальные переменные"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Правила набора для конференции"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Время правил набора"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Правила набора для голосовой почты"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Зоны для правил набора"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Префикс (0) для добавления/удаления к/из международных номеров"
-
-#~ msgid "localzone"
-#~ msgstr "местная зона"
-
-#~ msgid "Connection to use"
-#~ msgstr "Использовать соединение"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Назначения функцилнальных клавиш"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "Клавиша для разрыва соединения"
-
-#~ msgid "Key to Park call"
-#~ msgstr "Клавиша для \"парковки\" вызова "
-
-#~ msgid "Parking Feature"
-#~ msgstr "Функция \"Парковка\""
-
-#~ msgid "One touch record key"
-#~ msgstr "Клавиша записи в одно касание"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Аудио файл, проигрываемый \"припаркованному\""
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr "Максимальное время (мс) между нажатиями для активации функции"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Метод поиска слота для парковки"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Играть тон вежливости для"
-
-#~ msgid "Enable Parking"
-#~ msgstr "Разрешить \"Парковку\""
-
-#~ msgid "Extension to dial to park"
-#~ msgstr "Расширение набора для \"парковки\""
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Время \"Парковки\" (секунды)"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "Диапазон расширений для \"парковки\" вызова"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Перезагрузить конфигурацию оборудования"
-
-#~ msgid "Reboot Method"
-#~ msgstr "Метод перезагрузки"
-
-#~ msgid "Parameter"
-#~ msgstr "Параметр"
-
-#~ msgid "Option type"
-#~ msgstr "Тип параметра"
-
-#~ msgid "User name"
-#~ msgstr "Имя пользователя"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Общие параметры IAX"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Разрешить кодеки"
-
-#~ msgid "Static"
-#~ msgstr "Статический"
-
-#~ msgid "Write Protect"
-#~ msgstr "Защита от записи"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Конференция Meetme"
-
-#~ msgid "Admin PIN"
-#~ msgstr "PIN администратора"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "PIN совещания"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Общие параметры конференции Meetme"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Количество используемых 20 мс буферов"
-
-#~ msgid "Modules"
-#~ msgstr "Модули"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Приложение сбора сигналов тревоги"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Приложение аутентификации"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "Убедитесь что Asterisk не сохраняет CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Проверить канал на доступность"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Слашать на любом канале"
-
-#~ msgid "Database access functions"
-#~ msgstr "Функции доступа базы данных"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Приложение набора"
-
-#~ msgid "DISA (Direct Inward System Access) Application"
-#~ msgstr ""
-#~ "Приложение доступа к добавочной линии путем прямого установления "
-#~ "входящего соединения (DISA)"
-
-#~ msgid "Dump channel variables Application"
-#~ msgstr "Приложение сбора переменных канала"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Приложение эха"
-
-#~ msgid "Executes applications"
-#~ msgstr "Выполняет приложение"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "Интерфейс внешнего IVR приложения"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Операции управления группой"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Приложение передачи изображений"
-
-#~ msgid "Look up Caller*ID name/number from black"
-#~ msgstr "Искать имя CallerID в \"черном\" списке"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr "Искать имя CallerID в локальной базе"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Макрос расширения"
-
-#~ msgid "A simple math Application"
-#~ msgstr "Простое математическое приложение"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "Приложение MD5"
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Записать вызов и микшировать аудио во время записи"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Приложение для воспроизведения"
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Требовать номер телефона, который необходимо ввести"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "Постановка вызовов на ожидание"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Приложение чтения переменных"
-
-#~ msgid "Read in a file"
-#~ msgstr "Читать в файл"
-
-#~ msgid "Trivial Record Application"
-#~ msgstr "Приложения для записи"
-
-#~ msgid "Send DTMF digits Application"
-#~ msgstr "Приложение отправки DTMF"
-
-#~ msgid "Send Text Applications"
-#~ msgstr "Приложения отправки текста"
-
-#~ msgid "Set CallerID Application"
-#~ msgstr "Приложение установки CallerID"
-
-#~ msgid "Set RDNIS Number"
-#~ msgstr "Установить номер RDNIS"
-
-#~ msgid "Set ISDN Transfer Capability"
-#~ msgstr "Установить возможности передачи ISDN "
-
-#~ msgid "SMS/PSTN handler"
-#~ msgstr "Обработчик SMS/PSTN"
-
-#~ msgid "Hangs up the requested channel"
-#~ msgstr "Отсоединяет запрошенный канал"
-
-#~ msgid "Stack Routines"
-#~ msgstr "Функции стека"
-
-#~ msgid "Generic System() application"
-#~ msgstr "Приложение System()"
-
-#~ msgid "Playback with Talk Detection"
-#~ msgstr "Воспроизведение с обнаружением разговора"
-
-#~ msgid "Interface Test Application"
-#~ msgstr "Приложение для тестирования интерфейса"
-
-#~ msgid "Transfer"
-#~ msgstr "Пересылка"
-
-#~ msgid "TXTCIDName"
-#~ msgstr "Имя TXTCID"
-
-#~ msgid "Send URL Applications"
-#~ msgstr "Приложения отсылки URL"
-
-#~ msgid "Custom User Event Application"
-#~ msgstr "Приложение пользовательских событий"
-
-#~ msgid "Send verbose output"
-#~ msgstr "Отправлять подробный вывод"
-
-#~ msgid "Voicemail"
-#~ msgstr "Голосовая почта"
-
-#~ msgid "While Loops and Conditional Execution"
-#~ msgstr "Циклы while и условное выполнение"
-
-#~ msgid "Asterisk Call Manager CDR Backend"
-#~ msgstr "Бэкенд CDR менеджера вызовов Asterisk"
-
-#~ msgid "MySQL CDR Backend"
-#~ msgstr "Бэкенд MySQL CDR"
-
-#~ msgid "PostgreSQL CDR Backend"
-#~ msgstr "Бэкенд PostgreSQL CDR"
-
-#~ msgid "SQLite CDR Backend"
-#~ msgstr "Бэкенд SQLite CDR"
-
-#~ msgid "Local Proxy Channel"
-#~ msgstr "Локальный прокси-канал"
-
-#~ msgid "Session Initiation Protocol (SIP)"
-#~ msgstr "Session Initiation Protocol - протокол установления сеанса (SIP)"
-
-#~ msgid "Adaptive Differential PCM Coder/Decoder"
-#~ msgstr "Адаптивный дифференциальный PCM кодер/декодер"
-
-#~ msgid "A-law Coder/Decoder"
-#~ msgstr "A-law кодер/декодер"
-
-#~ msgid "A-law and Mulaw direct Coder/Decoder"
-#~ msgstr "A-law и Mu-law прямой кодер/декодер"
-
-#~ msgid "ITU G.726-32kbps G726 Transcoder"
-#~ msgstr "ITU G.726-32кбит/с G726 транскодер"
-
-#~ msgid "GSM/PCM16 (signed linear) Codec Translation"
-#~ msgstr "Транслятор кодека GSM/PCM16 (знаковый линейный)"
-
-#~ msgid "Speex/PCM16 (signed linear) Codec Translator"
-#~ msgstr "Транслятор кодека Speex/PCM16 (знаковый линейный)"
-
-#~ msgid "Mu-law Coder/Decoder"
-#~ msgstr "Mu-law кодер/декодер"
-
-#~ msgid "Sun Microsystems AU format (signed linear)"
-#~ msgstr "Формат Sun Microsystems AU (знаковый линейный)"
-
-#~ msgid "Raw G.726 (16/24/32/40kbps) data"
-#~ msgstr "Необработанные данные G.726 (16/24/32/40кбит/с)"
-
-#~ msgid "Raw G729 data"
-#~ msgstr "Необработанные данные G729"
-
-#~ msgid "Raw GSM data"
-#~ msgstr "Необработанные данные GSM"
-
-#~ msgid "Raw h263 data"
-#~ msgstr "Необработанные данные h263"
-
-#~ msgid "JPEG (Joint Picture Experts Group) Image"
-#~ msgstr "Изображение JPEG (Joint Picture Experts Group) "
-
-#~ msgid "Dialogic VOX (ADPCM) File Format"
-#~ msgstr "Формат Dialogic VOX (ADPCM)"
-
-#~ msgid "Microsoft WAV format (8000hz Signed Line"
-#~ msgstr "Формат Microsoft WAV (800Гц, линейный знаковый)"
-
-#~ msgid "Microsoft WAV format (Proprietary GSM)"
-#~ msgstr "Формат Microsoft WAV (проприетарный GSM)"
-
-#~ msgid "Caller ID related dialplan functions"
-#~ msgstr "Функции правил набора Caller ID"
-
-#~ msgid "ENUM Functions"
-#~ msgstr "Функции ENUM"
-
-#~ msgid "URI encoding / decoding functions"
-#~ msgstr "Функции кодирования/декодирования URI"
-
-#~ msgid "Asterisk Extension Language Compiler"
-#~ msgstr "Компилятор языка расширений Asterisk"
-
-#~ msgid "Text Extension Configuration"
-#~ msgstr "Настройка текстового расширения"
-
-#~ msgid "Wil Cal U (Auto Dialer)"
-#~ msgstr "Позвоню тебе (Wil Cal U, автодозвонщик)"
-
-#~ msgid "MySQL Config Resource"
-#~ msgstr "Ресурс конфигурации MySQL"
-
-#~ msgid "ODBC Config Resource"
-#~ msgstr "Ресурс конфигурации ODBC"
-
-#~ msgid "PGSQL Module"
-#~ msgstr "PGSQL модуль"
-
-#~ msgid "Cryptographic Digital Signatures"
-#~ msgstr "Цифровые подписи"
-
-#~ msgid "Call Parking Resource"
-#~ msgstr "Ресурс \"парковки\""
-
-#~ msgid "Indications Configuration"
-#~ msgstr "Конфигурация индикаций"
-
-#~ msgid "Call Monitoring Resource"
-#~ msgstr "Ресурс мониторинга вызова"
-
-#~ msgid "ODBC Resource"
-#~ msgstr "Ресурс ODBC"
-
-#~ msgid "SMDI Module"
-#~ msgstr "Модуль SMDI"
-
-#~ msgid "SNMP Module"
-#~ msgstr "Модуль SNMP"
-
-#~ msgid "Music On Hold"
-#~ msgstr "Музыка при ожидании"
-
-#~ msgid "Application"
-#~ msgstr "Приложение"
-
-#~ msgid "Directory of Music"
-#~ msgstr "Директория музыки"
-
-#~ msgid "Random Play"
-#~ msgstr "Воспроизведение в случайном порядке"
-
-#~ msgid "DTMF mode"
-#~ msgstr "DTMF режим"
-
-#~ msgid "From user (required by many SIP providers)"
-#~ msgstr "From user (от пользователя, требуется многими SIP-провайдерами)"
-
-#~ msgid "Allow Insecure for"
-#~ msgstr "Разрешить небезопасные для"
-
-#~ msgid "Mailbox for MWI"
-#~ msgstr "Почтовый ящик для MWI"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "NAT между телефоном и Asterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "Проверять метки в заголовках"
-
-#~ msgid "Register connection"
-#~ msgstr "Зарегистрировать соединение"
-
-#~ msgid "Client Type"
-#~ msgstr "Тип клиента"
-
-#~ msgid "Username"
-#~ msgstr "Имя пользователя"
-
-#~ msgid "Section sipgeneral"
-#~ msgstr "Общие SIP"
-
-#~ msgid "SIP realm"
-#~ msgstr "SIP realm"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "Общие настройки голосовой почты"
-
-#~ msgid "From Email address of server"
-#~ msgstr "От адреса эл. почты сервера"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "Ящики голосовой почты"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "Письмо содержит вложение"
-
-#~ msgid "Email"
-#~ msgstr "Эл. почта"
-
-#~ msgid "Display Name"
-#~ msgstr "Отображаемое имя"
-
-#~ msgid "Password"
-#~ msgstr "Пароль"
-
-#~ msgid "zone"
-#~ msgstr "зона"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Настройки голосовой зоны"
-
-#~ msgid "Message Format"
-#~ msgstr "Формат сообщения"
diff --git a/po/ru/base.po b/po/ru/base.po
deleted file mode 100644
index c47e582..0000000
--- a/po/ru/base.po
+++ /dev/null
@@ -1,3890 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: base\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-09-29 16:17+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d минутное окно, %d секундный интервал)"
-
-msgid "(%s available)"
-msgstr "(%s доступно)"
-
-msgid "(empty)"
-msgstr "(пусто)"
-
-msgid "(no interfaces attached)"
-msgstr "(нет связанных интерфейсов)"
-
-msgid "-- Additional Field --"
-msgstr "-- Дополнительное поле --"
-
-msgid "-- Please choose --"
-msgstr "-- Пожалуйста, выберите --"
-
-msgid "-- custom --"
-msgstr "-- пользовательский --"
-
-msgid "1 Minute Load:"
-msgstr "Загрузка за 1 минуту:"
-
-msgid "15 Minute Load:"
-msgstr "Загрузка за 15 минут:"
-
-msgid "40MHz 2nd channel above"
-msgstr "Второй 40МГц канал сверху"
-
-msgid "40MHz 2nd channel below"
-msgstr "Второй 40МГц канал снизу"
-
-msgid "5 Minute Load:"
-msgstr "Загрузка за 5 минут:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Базовый идентификатор обслуживания\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "Порт запроса <abbr title=\"Система доменных имён\">DNS</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "Порт <abbr title=\"Система доменных имён\">DNS</abbr>-сервера"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"<abbr title=\"Система доменных имён\">DNS</abbr> серверы будут опрошены в "
-"порядке, определенном в resolvfile файле"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Расширенный идентификатор обслуживания\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Интернет протокол версии 4\">IPv4</abbr>-адрес"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Интернет протокол версии 4\">IPv4</abbr>-адрес шлюза"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "Маска сети <abbr title=\"Интернет протокол версии 4\">IPv4</abbr>"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Интернет протокол версии 6\">IPv6</abbr>-адрес или сеть (CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Интернет протокол версии 6\">IPv6</abbr>-адрес шлюза"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "Настройка <abbr title=\"Светодиод\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Название <abbr title=\"Светодиод\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Управление доступом к носителю\">MAC</abbr>-адрес"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"максимальное\">Макс.</abbr> кол-во аренд <abbr title="
-"\"Протокол динамической конфигурации узла\">DHCP</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"максимальный\">Макс.</abbr> размер пакета <abbr title="
-"\"Extension Mechanisms for Domain Name System\">EDNS0</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-"<abbr title=\"максимальное\">Макс.</abbr> кол-во одновременных запросов"
-
-# Парный шифр используется для одноадресной передачи, а групповой - для широковещательной и мультикаста
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Парный: %s / Групповой: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "Поддержка AR"
-
-msgid "ARP retry threshold"
-msgstr "Порог повтора ARP"
-
-msgid "ATM Bridges"
-msgstr "Мосты ATM"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "Идентификатор виртуального канала ATM (VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "Идентификатор виртуального пути ATM (VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"ATM-мосты выставляют инкапсулированный Ethernet в соединениях AAL5 в "
-"качестве виртуальных сетевых интерфейсов Linux, которые могут быть "
-"использованы в сочетании с DHCP или PPP для подключения к сети провайдера."
-
-msgid "ATM device number"
-msgstr "Номер устройства ATM"
-
-msgid "Accept router advertisements"
-msgstr "Принимать извещения маршрутизатора"
-
-msgid "Access Concentrator"
-msgstr "Концентратор доступа"
-
-msgid "Access Point"
-msgstr "Точка доступа"
-
-msgid "Action"
-msgstr "Действие"
-
-msgid "Actions"
-msgstr "Действия"
-
-msgid "Activate this network"
-msgstr "Активировать эту сеть"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-"Активные маршруты <abbr title=\"Интернет протокол версии 4\">IPv4</abbr>"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-"Активные маршруты <abbr title=\"Интернет протокол версии 6\">IPv6</abbr>"
-
-msgid "Active Connections"
-msgstr "Активные соединения"
-
-msgid "Active DHCP Leases"
-msgstr "Активные аренды DHCP"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Активные аренды DHCPv6"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Добавить"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-"Добавить суффикс локального домена к именам, полученным из файлов hosts"
-
-msgid "Add new interface..."
-msgstr "Добавить новый интерфейс..."
-
-msgid "Additional Hosts files"
-msgstr "Дополнительные файлы hosts"
-
-msgid "Address"
-msgstr "Адрес"
-
-msgid "Address to access local relay bridge"
-msgstr "Адрес для доступа к локальному мосту-ретранслятору"
-
-msgid "Administration"
-msgstr "Управление"
-
-msgid "Advanced Settings"
-msgstr "Расширенные настройки"
-
-msgid "Advertise IPv6 on network"
-msgstr "Извещать об IPv6 в сети"
-
-msgid "Advertised network ID"
-msgstr "Идентификатор сети"
-
-msgid "Alert"
-msgstr "Тревожная ситуация"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Разрешить <abbr title=\"Secure Shell\">SSH</abbr>-аутентификацию с помощью "
-"пароля"
-
-msgid "Allow all except listed"
-msgstr "Разрешить все, кроме перечисленных"
-
-msgid "Allow listed only"
-msgstr "Разрешить только перечисленные"
-
-msgid "Allow localhost"
-msgstr "Разрешить локальный хост"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Разрешить удалённым хостам подключаться к локальным перенаправленным портам "
-"SSH"
-
-msgid "Allow root logins with password"
-msgstr "Разрешить пользователю root вход с помощью пароля"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-"Разрешить пользователю <em>root</em> входить в систему с помощью пароля"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr "Разрешить ответы в диапазоне 127.0.0.0/8, например, для RBL-сервисов"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Допустимый диапазон от 1 до 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Если вы не выберите эту опцию, то будет создана дополнительная сеть."
-
-msgid "Antenna 1"
-msgstr "Антенна 1"
-
-msgid "Antenna 2"
-msgstr "Антенна 2"
-
-msgid "Antenna Configuration"
-msgstr "Конфигурация антенн"
-
-msgid "Any zone"
-msgstr "Любая зона"
-
-msgid "Apply"
-msgstr "Принять"
-
-msgid "Applying changes"
-msgstr "Применение изменений"
-
-msgid "Assign interfaces..."
-msgstr "Назначить интерфейсы..."
-
-msgid "Associated Stations"
-msgstr "Подключенные клиенты"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Беспроводной 802.11%s контроллер Atheros"
-
-msgid "Authentication"
-msgstr "Аутентификация"
-
-msgid "Authoritative"
-msgstr "Авторитетный"
-
-msgid "Authorization Required"
-msgstr "Требуется авторизация"
-
-msgid "Auto Refresh"
-msgstr "Автообновление"
-
-msgid "Available"
-msgstr "Доступно"
-
-msgid "Available packages"
-msgstr "Доступные пакеты"
-
-msgid "Average:"
-msgstr "Средняя:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Назад"
-
-msgid "Back to Overview"
-msgstr "Назад к обзору"
-
-msgid "Back to configuration"
-msgstr "Назад к настройке"
-
-msgid "Back to overview"
-msgstr "Назад к обзору"
-
-msgid "Back to scan results"
-msgstr "Назад к результатам сканирования"
-
-msgid "Background Scan"
-msgstr "Фоновое сканирование"
-
-msgid "Backup / Flash Firmware"
-msgstr "Резервная копия / прошивка"
-
-msgid "Backup / Restore"
-msgstr "Резервное копирование / Восстановление"
-
-msgid "Backup file list"
-msgstr "Список файлов для резервного копирования"
-
-msgid "Bad address specified!"
-msgstr "Указан неправильный адрес!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Ниже приводится определённый список файлов для резервного копирования. Он "
-"состоит из изменённых конфигурационных файлов, отмеченных opkg, необходимых "
-"базовых файлов, а также шаблонов резервного копирования, определённых "
-"пользователем."
-
-msgid "Bitrate"
-msgstr "Скорость"
-
-msgid "Bogus NX Domain Override"
-msgstr "Переопределение поддельного NX-домена"
-
-msgid "Bridge"
-msgstr "Мост"
-
-msgid "Bridge interfaces"
-msgstr "Объединить в мост"
-
-msgid "Bridge unit number"
-msgstr "Номер моста"
-
-msgid "Bring up on boot"
-msgstr "Запустить при загрузке"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Беспроводной 802.11%s контроллер Broadcom"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Беспроводной 802.11 контроллер Broadcom BCM%04x"
-
-msgid "Buffered"
-msgstr "Буферизировано"
-
-msgid "Buttons"
-msgstr "Кнопки"
-
-msgid "CPU"
-msgstr "ЦП"
-
-msgid "CPU usage (%)"
-msgstr "Загрузка ЦП (%)"
-
-msgid "Cached"
-msgstr "Кэшировано"
-
-msgid "Cancel"
-msgstr "Отменить"
-
-msgid "Chain"
-msgstr "Цепочка"
-
-msgid "Changes"
-msgstr "Изменения"
-
-msgid "Changes applied."
-msgstr "Изменения приняты."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Изменить пароль администратора для доступа к устройству"
-
-msgid "Channel"
-msgstr "Канал"
-
-msgid "Check"
-msgstr "Проверить"
-
-msgid "Checksum"
-msgstr "Контрольная сумма"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Укажите зону, которую вы хотите прикрепить к этому интерфейсу. Выберите "
-"<em>не определено</em>, чтобы удалить этот интерфейс из зоны, или заполните "
-"поле <em>создать</em>, чтобы определить новую зону и прикрепить к ней этот "
-"интерфейс."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Выберите сеть (сети), которые вы хотите прикрепить к этому беспроводному "
-"интерфейсу, или заполните поле <em>создать</em>, чтобы определить новую сеть."
-
-msgid "Cipher"
-msgstr "Шифрование"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Нажмите \"Создать архив\", чтобы загрузить tar-архив текущих "
-"конфигурационных файлов. Для сброса настроек прошивки к исхдному состоянию "
-"нажмите \"Произвести сброс\" (возможно только для squashfs-образов)."
-
-msgid "Client"
-msgstr "Клиент"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "ID клиента при DHCP-запросе"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Завершать неактивное соединение после заданного интервала (сек.), "
-"используйте значение 0 для удержания неактивного соединения"
-
-msgid "Close list..."
-msgstr "Закрыть список..."
-
-msgid "Collecting data..."
-msgstr "Сбор информации..."
-
-msgid "Command"
-msgstr "Команда"
-
-msgid "Common Configuration"
-msgstr "Общая конфигурация"
-
-msgid "Compression"
-msgstr "Сжатие"
-
-msgid "Configuration"
-msgstr "Конфигурация"
-
-msgid "Configuration applied."
-msgstr "Конфигурация применена."
-
-msgid "Configuration files will be kept."
-msgstr "Конфигурационные файлы будут сохранены."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-"Использовать эту точку монтирования в качестве overlay-хранилища для block-"
-"extroot"
-
-msgid "Confirmation"
-msgstr "Подтверждение пароля"
-
-msgid "Connect"
-msgstr "Соединить"
-
-msgid "Connected"
-msgstr "Подключен"
-
-msgid "Connection Limit"
-msgstr "Ограничение соединений"
-
-msgid "Connections"
-msgstr "Соединения"
-
-msgid "Country"
-msgstr "Страна"
-
-msgid "Country Code"
-msgstr "Код страны"
-
-msgid "Cover the following interface"
-msgstr "Включить следующий интерфейс"
-
-msgid "Cover the following interfaces"
-msgstr "Включить следующие интерфейсы"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Создать / назначить зону сетевого экрана"
-
-msgid "Create Interface"
-msgstr "Создать интерфейс"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Создать мост над несколькими интерфейсами"
-
-msgid "Critical"
-msgstr "Критическая ситуация"
-
-msgid "Cron Log Level"
-msgstr "Уровень вывода Cron"
-
-msgid "Custom Interface"
-msgstr "Пользовательский интерфейс"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Настройка поведения <abbr title=\"Светодиод\">LED</abbr> если это возможно."
-
-msgid "DHCP Leases"
-msgstr "Аренды DHCP"
-
-msgid "DHCP Server"
-msgstr "DHCP-сервер"
-
-msgid "DHCP and DNS"
-msgstr "DHCP и DNS"
-
-msgid "DHCP client"
-msgstr "DHCP-клиент"
-
-msgid "DHCP-Options"
-msgstr "DHCP-Настройки"
-
-msgid "DHCPv6 Leases"
-msgstr "Аренды DHCPv6"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Перенаправление запросов DNS"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Отладка"
-
-msgid "Default %d"
-msgstr "По умолчанию %d"
-
-msgid "Default gateway"
-msgstr "Шлюз по умолчанию"
-
-msgid "Default state"
-msgstr "Начальное состояние"
-
-msgid "Define a name for this network."
-msgstr "Укажите имя этой сети."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Определить дополнительные опции DHCP, например, "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\", чтобы известить клиентов о DNS-"
-"серверах."
-
-msgid "Delete"
-msgstr "Удалить"
-
-msgid "Delete this interface"
-msgstr "Удалить этот интерфейс"
-
-msgid "Delete this network"
-msgstr "Удалить эту сеть"
-
-msgid "Description"
-msgstr "Описание"
-
-msgid "Design"
-msgstr "Тема"
-
-msgid "Destination"
-msgstr "Назначение"
-
-msgid "Device"
-msgstr "Устройство"
-
-msgid "Device Configuration"
-msgstr "Конфигурация устройства"
-
-msgid "Diagnostics"
-msgstr "Диагностика"
-
-msgid "Directory"
-msgstr "Директория"
-
-msgid "Disable"
-msgstr "Отключить"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Отключить <abbr title=\"Протокол динамической конфигурации узла\">DHCP</"
-"abbr> для этого интерфейса."
-
-msgid "Disable DNS setup"
-msgstr "Отключить настройку DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Отключить таймер HW-Beacon"
-
-msgid "Disabled"
-msgstr "Отключено"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Отбрасывать ответы RFC1918"
-
-msgid "Displaying only packages containing"
-msgstr "Показываются только пакеты, содержащие"
-
-msgid "Distance Optimization"
-msgstr "Оптимизация расстояния"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Расстояние до самого удалённого сетевого узла в метрах."
-
-msgid "Diversity"
-msgstr "Разновидность антенн"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq содержит в себе <abbr title=\"Протокол динамической конфигурации узла"
-"\">DHCP</abbr>-сервер и <abbr title=\"Служба доменных имён\">DNS</abbr>-"
-"прокси для сетевых экранов <abbr title=\"Преобразование сетевых адресов"
-"\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "Не кешировать отрицательные ответы, в т.ч. для несуществующих доменов"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Не перенаправлять запросы, которые не могут быть обработаны публичными DNS-"
-"серверами"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Не перенаправлять обратные DNS-запросы для локальных сетей"
-
-msgid "Do not send probe responses"
-msgstr "Не посылать тестовые ответы"
-
-msgid "Domain required"
-msgstr "Требуется домен"
-
-msgid "Domain whitelist"
-msgstr "Белый список доменов"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Не перенаправлять <abbr title=\"Служба доменных имён\">DNS</abbr>-запросы "
-"без <abbr title=\"Служба доменных имён\">DNS</abbr>-имени"
-
-msgid "Download and install package"
-msgstr "Загрузить и установить пакет"
-
-msgid "Download backup"
-msgstr "Загрузить резервную копию"
-
-msgid "Dropbear Instance"
-msgstr "Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear - это <abbr title=\"Secure Shell\">SSH</abbr>-сервер со встроенным "
-"<abbr title=\"Secure Copy\">SCP</abbr>"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Динамический <abbr title=\"Протокол динамической конфигурации узла\">DHCP</"
-"abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "Динамический туннель"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Динамически выделять DHCP-адреса клиентам. Если выключено, то будут "
-"обслужены только клиенты с постоянно арендованными адресами."
-
-msgid "EAP-Method"
-msgstr "Метод EAP"
-
-msgid "Edit"
-msgstr "Редактировать"
-
-msgid "Edit this interface"
-msgstr "Редактировать этот интерфейс"
-
-msgid "Edit this network"
-msgstr "Редактировать эту сеть"
-
-msgid "Emergency"
-msgstr "Чрезвычайная ситуация"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Включить <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Включить динамическое обновление оконечной точки HE.net"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Включить IPv6-согласование на PPP-соединении"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Пропускать Jumbo-кадры"
-
-msgid "Enable NTP client"
-msgstr "Включить NTP-клиент"
-
-msgid "Enable TFTP server"
-msgstr "Включить TFTP-сервер"
-
-msgid "Enable VLAN functionality"
-msgstr "Включить поддержку VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Включить изучение и устаревание (learning/aging)"
-
-msgid "Enable this mount"
-msgstr "Включить эту точку монтирования"
-
-msgid "Enable this swap"
-msgstr "Включить этот раздел подкачки"
-
-msgid "Enable/Disable"
-msgstr "Включить/выключить"
-
-msgid "Enabled"
-msgstr "Включено"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Включает Spanning Tree Protocol на этом мосту"
-
-msgid "Encapsulation mode"
-msgstr "Режим инкапсуляции"
-
-msgid "Encryption"
-msgstr "Шифрование"
-
-msgid "Erasing..."
-msgstr "Стирание..."
-
-msgid "Error"
-msgstr "Ошибка"
-
-msgid "Ethernet Adapter"
-msgstr "Ethernet-адаптер"
-
-msgid "Ethernet Switch"
-msgstr "Ethernet-коммутатор"
-
-msgid "Expand hosts"
-msgstr "Расширять имена узлов"
-
-msgid "Expires"
-msgstr "Истекает"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-"Время, через которое истекает аренда адреса, минимум 2 минуты (<code>2m</"
-"code>)."
-
-msgid "External system log server"
-msgstr "Сервер системного журнала"
-
-msgid "External system log server port"
-msgstr "Порт сервера системного журнала"
-
-msgid "Fast Frames"
-msgstr "Быстрые кадры"
-
-msgid "File"
-msgstr "Файл"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "Имя загрузочного образа, извещаемого клиентам"
-
-msgid "Filesystem"
-msgstr "Файловая система"
-
-msgid "Filter"
-msgstr "Фильтр"
-
-msgid "Filter private"
-msgstr "Фильтровать частные"
-
-msgid "Filter useless"
-msgstr "Фильтровать бесполезные"
-
-msgid "Find and join network"
-msgstr "Найти и присоединиться к сети"
-
-msgid "Find package"
-msgstr "Найти пакет"
-
-msgid "Finish"
-msgstr "Завершить"
-
-msgid "Firewall"
-msgstr "Межсетевой экран"
-
-msgid "Firewall Settings"
-msgstr "Настройки межсетевого экрана"
-
-msgid "Firewall Status"
-msgstr "Статус межсетевого экрана"
-
-msgid "Firmware Version"
-msgstr "Версия прошивки"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Фиксированный порт для исходящих DNS-запросов"
-
-msgid "Flags"
-msgstr "Флаги"
-
-msgid "Flash Firmware"
-msgstr "Установить прошивку"
-
-msgid "Flash image..."
-msgstr "Установить..."
-
-msgid "Flash new firmware image"
-msgstr "Установить новый образ прошивки"
-
-msgid "Flash operations"
-msgstr "Операции с прошивкой"
-
-msgid "Flashing..."
-msgstr "Прошивка..."
-
-# Force DHCP on the network
-msgid "Force"
-msgstr "Принудительно"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr "Требовать CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Использовать DHCP в этой сети, даже если найден другой сервер."
-
-msgid "Force TKIP"
-msgstr "Требовать TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "TKIP или CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Перенаправлять трафик DHCP"
-
-msgid "Forward broadcast traffic"
-msgstr "Перенаправлять широковещательный траффик"
-
-msgid "Forwarding mode"
-msgstr "Режим перенаправления"
-
-msgid "Fragmentation Threshold"
-msgstr "Порог фрагментации"
-
-msgid "Frame Bursting"
-msgstr "Пакетная передача кадров"
-
-msgid "Free"
-msgstr "Свободно"
-
-msgid "Free space"
-msgstr "Свободное место"
-
-msgid "Frequency Hopping"
-msgstr "Скачкообразная перестройка частоты"
-
-msgid "GHz"
-msgstr "ГГц"
-
-msgid "GPRS only"
-msgstr "Только GPRS"
-
-msgid "Gateway"
-msgstr "Шлюз"
-
-msgid "Gateway ports"
-msgstr "Порты шлюза"
-
-msgid "General Settings"
-msgstr "Основные настройки"
-
-msgid "General Setup"
-msgstr "Основные настройки"
-
-msgid "Generate archive"
-msgstr "Создать архив"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Беспроводной 802.11%s контроллер"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "Введённые пароли не совпадают, пароль не изменён!"
-
-msgid "Go to password configuration..."
-msgstr "Перейти к настройке пароля..."
-
-msgid "Go to relevant configuration page"
-msgstr "Перейти к странице конфигурации"
-
-msgid "HE.net password"
-msgstr "Пароль HE.net"
-
-msgid "HE.net user ID"
-msgstr "Идентификатор пользователя HE.net"
-
-msgid "HT capabilities"
-msgstr "Возможности HT"
-
-msgid "HT mode"
-msgstr "Режим HT"
-
-msgid "Handler"
-msgstr "Обработчик"
-
-# Вообще, SIGHUP означает, что "пользователь отключился от терминала". Но чаще всего сигнал используется для перезапуска, так что переведу именно так.
-msgid "Hang Up"
-msgstr "Перезапустить"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Здесь вы можете настроить основные параметры вашего устройства такие как имя "
-"хоста или часовой пояс."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Здесь вы можете добавить открытые SSH ключи (один ключ на строку) для SSH "
-"аутентификации."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Беспроводной 802.11b контроллер Hermes"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Скрыть <abbr title=\"Расширенный идентификатор сети\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Записи хостов"
-
-msgid "Host expiry timeout"
-msgstr "Таймаут хоста"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "<abbr title=\"Адрес интернет протокола\">IP</abbr>-адрес или сеть"
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Имя хоста в DHCP-запросах"
-
-msgid "Hostnames"
-msgstr "Имена хостов"
-
-msgid "IP address"
-msgstr "IP-адрес"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "Межсетевой экран IPv4"
-
-msgid "IPv4 WAN Status"
-msgstr "Статус IPv4 WAN"
-
-msgid "IPv4 address"
-msgstr "IPv4-адрес"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 и IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "Широковещательный IPv4-адрес"
-
-msgid "IPv4 gateway"
-msgstr "IPv4-адрес шлюза"
-
-msgid "IPv4 netmask"
-msgstr "Маска сети IPv4"
-
-msgid "IPv4 only"
-msgstr "Только IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "Длина префикса IPv4"
-
-msgid "IPv4-Address"
-msgstr "IPv4-адрес"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "Межсетевой экран IPv6"
-
-msgid "IPv6 WAN Status"
-msgstr "Статус IPv6 WAN"
-
-msgid "IPv6 address"
-msgstr "IPv6-адрес"
-
-msgid "IPv6 gateway"
-msgstr "IPv6-адрес шлюза"
-
-msgid "IPv6 only"
-msgstr "Только IPv6"
-
-msgid "IPv6 prefix"
-msgstr "Префикс IPv6"
-
-msgid "IPv6 prefix length"
-msgstr "Длина префикса IPv6"
-
-msgid "IPv6-Address"
-msgstr "IPv6-адрес"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6 в IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6 через IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6 через IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "Идентификация EAP"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Если выбрано, монтировать устройство, используя его UUID, вместо "
-"фиксированного файла устройства"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Если выбрано, монтировать устройство, используя название его раздела, вместо "
-"фиксированного файла устройства"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Если не выбрано, то маршрут по умолчанию не настраивается"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr "Если не выбрано, то извещаемые адреса DNS-серверов игнорируются"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Если физической памяти не достаточно, то неиспользуемые данные могут быть "
-"временно перемещены в раздел подкачки, что в свою очередь приведет к "
-"увеличению объёму свободной <abbr title=\"Random Access Memory\">RAM</abbr>. "
-"Однако, перемещение в файл - это достаточно долгий процесс, так как "
-"устройство, на котором располагается раздел подкачки, работает гораздо "
-"медленнее, чем <abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Игнорировать файлы hosts"
-
-msgid "Ignore interface"
-msgstr "Игнорировать интерфейс"
-
-msgid "Ignore resolve file"
-msgstr "Игнорировать файл resolv"
-
-msgid "Image"
-msgstr "Образ"
-
-msgid "In"
-msgstr "В"
-
-msgid "Inactivity timeout"
-msgstr "Таймаут бездействия"
-
-msgid "Inbound:"
-msgstr "Входящий:"
-
-msgid "Info"
-msgstr "Информация"
-
-msgid "Initscript"
-msgstr "Скрипт инициализации"
-
-msgid "Initscripts"
-msgstr "Скрипты инциализации"
-
-msgid "Install"
-msgstr "Установить"
-
-msgid "Install package %q"
-msgstr "Установить пакет %q"
-
-msgid "Install protocol extensions..."
-msgstr "Установить расширения протокола..."
-
-msgid "Installed packages"
-msgstr "Установленные пакеты"
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid "Interface Configuration"
-msgstr "Конфигурация интерфейса"
-
-msgid "Interface Overview"
-msgstr "Обзор интерфейса"
-
-msgid "Interface is reconnecting..."
-msgstr "Интерфейс переподключается..."
-
-msgid "Interface is shutting down..."
-msgstr "Интерфейс отключается..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Интерфейс не существует или пока не подключен."
-
-msgid "Interface reconnected"
-msgstr "Интерфейс переподключен"
-
-msgid "Interface shut down"
-msgstr "Интерфейс отключен"
-
-msgid "Interfaces"
-msgstr "Интерфейсы"
-
-msgid "Internal Server Error"
-msgstr "Внутренняя ошибка сервера"
-
-msgid "Invalid"
-msgstr "Введённое значение не верно"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-"Указан неверный VLAN ID! Доступны только идентификаторы в диапазоне от %d до "
-"%d."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "Указан неверный VLAN ID! Доступны только уникальные ID"
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Неверный логин и/или пароль! Пожалуйста попробуйте снова."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Вы пытаетесь обновить прошивку файлом, который не помещается в память "
-"устройства! Пожалуйста, проверьте файл образа."
-
-msgid "Java Script required!"
-msgstr "Требуется Java Script!"
-
-msgid "Join Network"
-msgstr "Подключение к сети"
-
-msgid "Join Network: Settings"
-msgstr "Подключение к сети: настройки"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Подключение к сети: сканирование"
-
-msgid "Keep settings"
-msgstr "Сохранить настройки"
-
-msgid "Kernel Log"
-msgstr "Журнал ядра"
-
-msgid "Kernel Version"
-msgstr "Версия ядра"
-
-msgid "Key"
-msgstr "Ключ"
-
-msgid "Key #%d"
-msgstr "Ключ №%d"
-
-msgid "Kill"
-msgstr "Принудительно завершить"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "L2TP-сервер"
-
-msgid "LCP echo failure threshold"
-msgstr "Порог ошибок эхо-запросов LCP"
-
-msgid "LCP echo interval"
-msgstr "Интервал эхо-запросов LCP"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Метка"
-
-msgid "Language"
-msgstr "Язык"
-
-msgid "Language and Style"
-msgstr "Язык и тема"
-
-msgid "Lease validity time"
-msgstr "Срок действия аренды"
-
-msgid "Leasefile"
-msgstr "Файл аренд"
-
-msgid "Leasetime"
-msgstr "Время аренды"
-
-msgid "Leasetime remaining"
-msgstr "Оставшееся время аренды"
-
-msgid "Leave empty to autodetect"
-msgstr "Оставьте поле пустым для автоопределения"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Оставьте пустым для использования текущего адреса WAN"
-
-msgid "Legend:"
-msgstr "Легенда:"
-
-msgid "Limit"
-msgstr "Предел"
-
-msgid "Link On"
-msgstr "Подключение"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Список <abbr title=\"Domain Name System\">DNS</abbr>-серверов для "
-"перенаправления запросов"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Список доменов, для которых разрешены ответы RFC1918"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "Список хостов, поставляющих поддельные результаты домена NX"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr "Слушать только на данном интерфейсе или, если не определено, на всех"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Порт для входящих DNS-запросов"
-
-msgid "Load"
-msgstr "Загрузка"
-
-msgid "Load Average"
-msgstr "Средняя загрузка"
-
-msgid "Loading"
-msgstr "Загрузка"
-
-msgid "Local IPv4 address"
-msgstr "Локальный IPv4-адрес"
-
-msgid "Local IPv6 address"
-msgstr "Локальный IPv6-адрес"
-
-msgid "Local Startup"
-msgstr "Локальная загрузка"
-
-msgid "Local Time"
-msgstr "Местное время"
-
-msgid "Local domain"
-msgstr "Локальный домен"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Определение локального домена. Имена в этом домене никогда не запрашиваются "
-"у DNS-сервера, а разрешаются на основе данных DHCP и файлов hosts"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Суффикс локального домена, который будет добавлен к DHCP-именам и записям из "
-"файлов hosts"
-
-msgid "Local server"
-msgstr "Локальный сервер"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Локализировать имя хоста в зависимости от запрашиваемой подсети, если "
-"доступно несколько IP-адресов."
-
-msgid "Localise queries"
-msgstr "Локализовывать запросы"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Привязка к каналу %d, используемому %s"
-
-msgid "Log output level"
-msgstr "Уровень вывода"
-
-msgid "Log queries"
-msgstr "Записывать запросы в журнал"
-
-msgid "Logging"
-msgstr "Журналирование"
-
-msgid "Login"
-msgstr "Войти"
-
-msgid "Logout"
-msgstr "Выйти"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "Минимальный адрес аренды."
-
-msgid "MAC-Address"
-msgstr "MAC-адрес"
-
-msgid "MAC-Address Filter"
-msgstr "Фильтр MAC-адресов"
-
-msgid "MAC-Filter"
-msgstr "MAC-фильтр"
-
-msgid "MAC-List"
-msgstr "Список MAC"
-
-msgid "MB/s"
-msgstr "МБ/с"
-
-msgid "MHz"
-msgstr "МГц"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Максимальная скорость"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Максимальное количество активных арендованных DHCP-адресов"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Максимально допустимое количество одновременных DNS-запросов"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Максимально допустимый размер UDP пакетов-EDNS.0"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Максимальное время ожидания готовности модема (секунды)"
-
-msgid "Maximum hold time"
-msgstr "Максимальное время удержания"
-
-msgid "Maximum number of leased addresses."
-msgstr "Максимальное количество арендованных адресов."
-
-msgid "Mbit/s"
-msgstr "Мбит/с"
-
-msgid "Memory"
-msgstr "Память"
-
-msgid "Memory usage (%)"
-msgstr "Использование памяти (%)"
-
-msgid "Metric"
-msgstr "Метрика"
-
-msgid "Minimum Rate"
-msgstr "Минимальная скорость"
-
-msgid "Minimum hold time"
-msgstr "Минимальное время удержания"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Отсутствует расширение протокола %q"
-
-msgid "Mode"
-msgstr "Режим"
-
-msgid "Modem device"
-msgstr "Модем"
-
-msgid "Modem init timeout"
-msgstr "Таймаут инициализации модема"
-
-# 802.11 monitor mode
-msgid "Monitor"
-msgstr "Монитор"
-
-msgid "Mount Entry"
-msgstr "Точка монтирования"
-
-msgid "Mount Point"
-msgstr "Точка монтирования"
-
-msgid "Mount Points"
-msgstr "Точки монтирования"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Точки монтирования - Запись"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Точки монтирования - Запись подкачки"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Точки монтирования определяют, куда в файловой системе будет прикреплено "
-"запоминающее устройство"
-
-msgid "Mount options"
-msgstr "Опции монтирования"
-
-msgid "Mount point"
-msgstr "Точка монтирования"
-
-msgid "Mounted file systems"
-msgstr "Смонтированные файловые системы"
-
-msgid "Move down"
-msgstr "Переместить вниз"
-
-msgid "Move up"
-msgstr "Переместить вверх"
-
-msgid "Multicast Rate"
-msgstr "Скорость групповой передачи"
-
-msgid "Multicast address"
-msgstr "Адрес групповой передачи"
-
-msgid "NAS ID"
-msgstr "Идентификатор NAS"
-
-msgid "NTP server candidates"
-msgstr "Список NTP-серверов"
-
-msgid "Name"
-msgstr "Имя"
-
-msgid "Name of the new interface"
-msgstr "Имя нового интерфейса"
-
-msgid "Name of the new network"
-msgstr "Имя новой сети"
-
-msgid "Navigation"
-msgstr "Навигация"
-
-msgid "Netmask"
-msgstr "Маска сети"
-
-msgid "Network"
-msgstr "Сеть"
-
-msgid "Network Utilities"
-msgstr "Сетевые утилиты"
-
-msgid "Network boot image"
-msgstr "Образ системы для сетевой загрузки"
-
-msgid "Network without interfaces."
-msgstr "Сеть без интерфейсов."
-
-msgid "Next »"
-msgstr "Следующий »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "DHCP-сервер не настроен для этого интерфейса"
-
-msgid "No chains in this table"
-msgstr "Нет цепочек в этой таблице"
-
-msgid "No files found"
-msgstr "Файлы не найдены"
-
-msgid "No information available"
-msgstr "Нет доступной информации"
-
-msgid "No negative cache"
-msgstr "Отключить кэш отрицательных ответов"
-
-msgid "No network configured on this device"
-msgstr "Не настроена сеть на устройстве"
-
-msgid "No network name specified"
-msgstr "Не задано имя сети"
-
-msgid "No package lists available"
-msgstr "Список пакетов не доступен"
-
-msgid "No password set!"
-msgstr "Пароль не установлен!"
-
-msgid "No rules in this chain"
-msgstr "Нет правил в данной цепочке"
-
-msgid "No zone assigned"
-msgstr "Зона не присвоена"
-
-msgid "Noise"
-msgstr "Шум"
-
-msgid "Noise:"
-msgstr "Шум:"
-
-msgid "None"
-msgstr "Нет"
-
-msgid "Normal"
-msgstr "Нормально"
-
-msgid "Not Found"
-msgstr "Не найдено"
-
-msgid "Not associated"
-msgstr "Не связанный"
-
-msgid "Not connected"
-msgstr "Не подключено"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Примечание: конфигурационные файлы будут стёрты."
-
-msgid "Notice"
-msgstr "Заметка"
-
-msgid "Nslookup"
-msgstr "DNS-запрос"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Настройка OPKG"
-
-msgid "Off-State Delay"
-msgstr "Задержка выключенного состояния"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"На этой странице вы можете настроить сетевые интерфейсы. Вы можете "
-"объединить несколько интерфейсов в мост, выбрав опцию \"Объединить в мост\" "
-"и введя список интерфейсов, разделенных пробелами. Вы также можете "
-"использовать <abbr title=\"Виртуальные локальные сети\">VLAN</abbr>-"
-"обозначения вида <samp>ИНТЕРФЕЙС.НОМЕРVLAN</samp> (<abbr title=\"например"
-"\">напр.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Задержка включенного состояния"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Одно или несколько полей содержат недопустимые значения!"
-
-msgid "One or more required fields have no value!"
-msgstr "Одно или несколько обязательных полей не заполнены!"
-
-msgid "Open list..."
-msgstr "Открыть список..."
-
-msgid "Option changed"
-msgstr "Опция изменена"
-
-msgid "Option removed"
-msgstr "Опция удалена"
-
-msgid "Options"
-msgstr "Опции"
-
-msgid "Other:"
-msgstr "Другие:"
-
-msgid "Out"
-msgstr "Вне"
-
-msgid "Outbound:"
-msgstr "Исходящий:"
-
-msgid "Outdoor Channels"
-msgstr "Внешние каналы"
-
-msgid "Override MAC address"
-msgstr "Назначить MAC-адрес"
-
-msgid "Override MTU"
-msgstr "Назначить MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Назначить шлюз в ответах DHCP"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Переопределите сетевую маску, отправленную клиентам. Обычно это вычислено от "
-"подсети, которая подана."
-
-msgid "Override the table used for internal routes"
-msgstr "Назначить таблицу внутренних маршрутов"
-
-msgid "Overview"
-msgstr "Обзор"
-
-msgid "Owner"
-msgstr "Владелец"
-
-msgid "PAP/CHAP password"
-msgstr "Пароль PAP/CHAP"
-
-msgid "PAP/CHAP username"
-msgstr "Имя пользователя PAP/CHAP"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "Инкапсуляция PPPoA"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPTP"
-
-msgid "Package libiwinfo required!"
-msgstr "Требуется пакет libiwinfo!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Список пакетов обновлялся более 24 часов назад"
-
-msgid "Package name"
-msgstr "Имя пакета"
-
-msgid "Packets"
-msgstr "Пакеты"
-
-msgid "Part of zone %q"
-msgstr "Часть зоны %q"
-
-msgid "Password"
-msgstr "Пароль"
-
-msgid "Password authentication"
-msgstr "Аутентификация с помощью пароля"
-
-msgid "Password of Private Key"
-msgstr "Пароль или закрытый ключ"
-
-msgid "Password successfully changed!"
-msgstr "Пароль успешно изменён!"
-
-msgid "Path to CA-Certificate"
-msgstr "Путь к центру сертификации"
-
-msgid "Path to Client-Certificate"
-msgstr "Путь к клиентскому сертификату"
-
-msgid "Path to Private Key"
-msgstr "Путь к личному ключу"
-
-msgid "Path to executable which handles the button event"
-msgstr "Путь к программе, обрабатывающей нажатие кнопки"
-
-msgid "Peak:"
-msgstr "Пиковая:"
-
-msgid "Perform reboot"
-msgstr "Выполнить перезагрузку"
-
-msgid "Perform reset"
-msgstr "Выполнить сброс"
-
-msgid "Phy Rate:"
-msgstr "Скорость:"
-
-msgid "Physical Settings"
-msgstr "Настройки канала"
-
-msgid "Ping"
-msgstr "Эхо-запрос"
-
-msgid "Pkts."
-msgstr "Пакетов."
-
-msgid "Please enter your username and password."
-msgstr "Пожалуйста, введите логин и пароль."
-
-msgid "Please wait: Device rebooting..."
-msgstr "Пожалуйста подождите: устройство перезагружается..."
-
-msgid "Policy"
-msgstr "Политика"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Port %d"
-msgstr "Порт %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "Порт %d нетегирован в нескольких VLANах!"
-
-msgid "Port status:"
-msgstr "Состояние порта:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Предполагать, что узел недоступен после указанного количества ошибок "
-"получения эхо-пакета LCP, введите 0 для игнорирования ошибок"
-
-msgid "Prevents client-to-client communication"
-msgstr "Не позволяет клиентам обмениваться друг с другом информацией"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Беспроводной 802.11b контроллер Prism2/2.5/3"
-
-msgid "Proceed"
-msgstr "Продолжить"
-
-msgid "Processes"
-msgstr "Процессы"
-
-msgid "Prot."
-msgstr "Прот."
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid "Protocol family"
-msgstr "Семейство протоколов"
-
-msgid "Protocol of the new interface"
-msgstr "Протокол нового интерфейса"
-
-msgid "Protocol support is not installed"
-msgstr "Поддержка протокола не установлена"
-
-msgid "Provide NTP server"
-msgstr "Включить NTP-сервер"
-
-msgid "Provide new network"
-msgstr "Предоставлять новую сеть"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Псевдо Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Качество"
-
-msgid "RTS/CTS Threshold"
-msgstr "Порог RTS/CTS"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr "Скорость приёма"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "Беспроводной 802.11%s контроллер RaLink"
-
-msgid "Radius-Accounting-Port"
-msgstr "Порт Radius-Accounting"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Секрет Radius-Accounting"
-
-msgid "Radius-Accounting-Server"
-msgstr "Сервер Radius-Accounting"
-
-msgid "Radius-Authentication-Port"
-msgstr "Порт Radius-Authentication"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Секрет Radius-Authentication"
-
-msgid "Radius-Authentication-Server"
-msgstr "Сервер Radius-Authentication"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Читать <code>/etc/ethers</code> для настройки <abbr title=\"Протокол "
-"динамической конфигурации узла\">DHCP</abbr>-сервера"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Действительно удалить этот интерфейс? Удаление не может быть отменено!\\nВы "
-"можете потерять доступ к этому устройству, если вы подключены через этот "
-"интерфейс."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Действительно удалить эту беспроводную сеть? Удаление не может быть отменено!"
-"\\nВы можете потерять доступ к этому устройству, если вы подключены через "
-"эту сеть."
-
-msgid "Really reset all changes?"
-msgstr "Действительно сбросить все изменения?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Действительно отключить интерфейс \"%s\" ?\\nВы можете потерять доступ к "
-"этому устройству, если вы подключены через этот интерфейс."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Действительно выключить сеть?\\nВы можете потерять доступ к этому "
-"устройству, если вы подключены через этот интерфейс."
-
-msgid "Really switch protocol?"
-msgstr "Вы действительно хотите изменить протокол?"
-
-msgid "Realtime Connections"
-msgstr "Соединения в реальном времени"
-
-msgid "Realtime Graphs"
-msgstr "Графики в реальном времени"
-
-msgid "Realtime Load"
-msgstr "Загрузка в реальном времени"
-
-msgid "Realtime Traffic"
-msgstr "Трафик в реальном времени"
-
-msgid "Realtime Wireless"
-msgstr "Беспроводная сеть в реальном времени"
-
-msgid "Rebind protection"
-msgstr "Защита от DNS Rebinding"
-
-msgid "Reboot"
-msgstr "Перезагрузка"
-
-msgid "Rebooting..."
-msgstr "Перезагрузка..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Перезагрузить операционную систему вашего устройства"
-
-msgid "Receive"
-msgstr "Приём"
-
-msgid "Receiver Antenna"
-msgstr "Приёмная антенна"
-
-msgid "Reconnect this interface"
-msgstr "Переподключить этот интерфейс"
-
-msgid "Reconnecting interface"
-msgstr "Интерфейс переподключается"
-
-# References to firewall chains
-msgid "References"
-msgstr "Ссылки"
-
-msgid "Regulatory Domain"
-msgstr "Нормативная зона"
-
-msgid "Relay"
-msgstr "Ретранслятор"
-
-msgid "Relay Bridge"
-msgstr "Мост-ретранслятор"
-
-msgid "Relay between networks"
-msgstr "Ретранслятор между сетями"
-
-msgid "Relay bridge"
-msgstr "Мост-ретранслятор"
-
-msgid "Remote IPv4 address"
-msgstr "Удалённый IPv4-адрес"
-
-msgid "Remove"
-msgstr "Удалить"
-
-msgid "Repeat scan"
-msgstr "Повторить сканирование"
-
-msgid "Replace entry"
-msgstr "Заменить запись"
-
-msgid "Replace wireless configuration"
-msgstr "Заменить беспроводную конфигурацию"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Требуется для некоторых интернет-провайдеров"
-
-msgid "Reset"
-msgstr "Сбросить"
-
-msgid "Reset Counters"
-msgstr "Сбросить счётчики"
-
-msgid "Reset to defaults"
-msgstr "Сбросить на значения по умолчанию"
-
-msgid "Resolv and Hosts Files"
-msgstr "Файлы resolv и hosts"
-
-msgid "Resolve file"
-msgstr "Файл resolv"
-
-msgid "Restart"
-msgstr "Перезапустить"
-
-msgid "Restart Firewall"
-msgstr "Перезапустить межсетевой экран"
-
-msgid "Restore backup"
-msgstr "Восстановить резервную копию"
-
-msgid "Reveal/hide password"
-msgstr "Показать/скрыть пароль"
-
-msgid "Revert"
-msgstr "Вернуть"
-
-msgid "Root"
-msgstr "Корень"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Корневая директория для TFTP"
-
-msgid "Router Model"
-msgstr "Модель маршрутизатора"
-
-msgid "Router Name"
-msgstr "Название маршрутизатора"
-
-msgid "Router Password"
-msgstr "Пароль маршрутизатора"
-
-msgid "Routes"
-msgstr "Маршруты"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Маршрутизация служит для определения через какой интерфейс и шлюз можно "
-"достичть определённого хоста или сети."
-
-msgid "Rule #"
-msgstr "Правило №"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "Проверять файловую систему перед монтированием устройства"
-
-msgid "Run filesystem check"
-msgstr "Проверять файловую систему"
-
-msgid "SSH Access"
-msgstr "Доступ по SSH"
-
-msgid "SSH-Keys"
-msgstr "SSH-ключи"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Сохранить"
-
-msgid "Save & Apply"
-msgstr "Сохранить и применить"
-
-msgid "Save &#38; Apply"
-msgstr "Сохранить и применить"
-
-msgid "Scan"
-msgstr "Сканировать"
-
-msgid "Scheduled Tasks"
-msgstr "Запланированные задания"
-
-msgid "Section added"
-msgstr "Секция добавлена"
-
-msgid "Section removed"
-msgstr "Секция удалена"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Для подробной информации обратитесь к справке по \"mount\" (man mount)"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"Отправлять эхо-пакеты LCP с указанным интервалом (секунды), эффективно "
-"только в сочетании с порогом ошибок"
-
-msgid "Send router solicitations"
-msgstr "Отправлять извещения маршрутизатора"
-
-msgid "Separate Clients"
-msgstr "Разделять клиентов"
-
-msgid "Separate WDS"
-msgstr "Отдельный WDS"
-
-msgid "Server Settings"
-msgstr "Настройки сервера"
-
-msgid "Service Name"
-msgstr "Имя службы"
-
-msgid "Service Type"
-msgstr "Тип службы"
-
-msgid "Services"
-msgstr "Сервисы"
-
-msgid "Setup DHCP Server"
-msgstr "Настроить сервер DHCP"
-
-msgid "Setup Time Synchronization"
-msgstr "Настроить синхронизацию времени"
-
-msgid "Show current backup file list"
-msgstr "Показать текущий список файлов резервной копии"
-
-msgid "Shutdown this interface"
-msgstr "Выключить этот интерфейс"
-
-msgid "Shutdown this network"
-msgstr "Выключить эту сеть"
-
-msgid "Signal"
-msgstr "Сигнал"
-
-msgid "Signal:"
-msgstr "Сигнал:"
-
-msgid "Size"
-msgstr "Размер"
-
-msgid "Skip"
-msgstr "Пропустить"
-
-msgid "Skip to content"
-msgstr "Перейти к содержимому"
-
-msgid "Skip to navigation"
-msgstr "Перейти к навигации"
-
-msgid "Slot time"
-msgstr "Время слота"
-
-msgid "Software"
-msgstr "Программное обеспечение"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Некоторые значения полей недопустимы, невозможно сохранить информацию!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "Извините, запрошенный объект не был найден."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "Извините, сервер столкнулся с неожиданной ошибкой."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"К сожалению, автоматическое обновление не поддерживается, новая прошивка "
-"должна быть установлена вручную. Обратитесь к вики OpenWrt для получения "
-"конкретных инструкций для вашего устройства."
-
-msgid "Sort"
-msgstr "Сортировка"
-
-msgid "Source"
-msgstr "Источник"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "Анонсируемое предпочитаемое время жизни префикса (сек.)"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Анонсируемое действительное время жизни префикса (сек.)"
-
-msgid "Specifies the button state to handle"
-msgstr "Состояние кнопки, которое необходимо обработать"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Директория, к которой присоединено устройство"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Порт данного процесса <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Максимальное количество неудачных запросов ARP, после которого узлы "
-"считаются отключенными"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-"Максимальное количество секунд, после которого узлы считаются отключенными"
-
-msgid "Specify the secret encryption key here."
-msgstr "Укажите закрытый ключ."
-
-msgid "Start"
-msgstr "Запустить"
-
-msgid "Start priority"
-msgstr "Приоритет"
-
-msgid "Startup"
-msgstr "Загрузка"
-
-msgid "Static IPv4 Routes"
-msgstr "Статические маршруты IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Статические маршруты IPv6"
-
-msgid "Static Leases"
-msgstr "Постоянные аренды"
-
-msgid "Static Routes"
-msgstr "Статические маршруты"
-
-msgid "Static WDS"
-msgstr "Статический WDS"
-
-msgid "Static address"
-msgstr "Статический адрес"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Постоянная аренда используется для присвоения фиксированных IP-адресов и "
-"имён DHCP-клиентам. Постоянная аренда также необходима для статических "
-"интерфейсов, в которых обслуживаются только клиенты с присвоенными адресами."
-
-msgid "Status"
-msgstr "Статус"
-
-msgid "Stop"
-msgstr "Остановить"
-
-msgid "Strict order"
-msgstr "Строгий порядок"
-
-msgid "Submit"
-msgstr "Применить"
-
-msgid "Swap Entry"
-msgstr "Раздел подкачки"
-
-msgid "Switch"
-msgstr "Коммутатор"
-
-msgid "Switch %q"
-msgstr "Коммутатор %q"
-
-msgid "Switch %q (%s)"
-msgstr "Коммутатор %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Изменить протокол"
-
-msgid "Sync with browser"
-msgstr "Синхронизировать с браузером"
-
-msgid "Synchronizing..."
-msgstr "Синхронизация..."
-
-msgid "System"
-msgstr "Система"
-
-msgid "System Log"
-msgstr "Системный журнал"
-
-msgid "System Properties"
-msgstr "Свойства системы"
-
-msgid "System log buffer size"
-msgstr "Размер системного журнала"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Настройки TFTP"
-
-msgid "TFTP server root"
-msgstr "Корень TFTP-сервера"
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr "Скорость передачи"
-
-msgid "Table"
-msgstr "Таблица"
-
-msgid "Target"
-msgstr "Цель"
-
-msgid "Terminate"
-msgstr "Завершить"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"Раздел <em>Конфигурация устройства</em> содержит физические настройки "
-"беспроводного оборудования, такие как канал, мощность передатчика или выбор "
-"антенны, которые являются общими для всех определённых беспроводных сетей "
-"(если оборудование поддерживает несколько SSID). Настройки отдельных сетей, "
-"такие как шифрование или режим работы, сгруппированы в разделе "
-"<em>Конфигурация интерфейса</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Пакет <em>libiwinfo-lua</em> не установлен. Для включения настроек "
-"беспроводных сетей, вам необходимо установить этот компонент!"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"Назначенный провайдеру префикс IPv6, обычно заканчивается на <code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Допустимые символы: <code>A-Z</code>, <code>a-z</code>, <code>0-9</code> и "
-"<code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"Устройство или раздел (<abbr title=\"например\">напр.</abbr> <code>/dev/"
-"sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Формат файловой системы (<abbr title=\"например\">напр.</abbr> <samp><abbr "
-"title=\"Third Extended Filesystem\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Образ загружен. Пожалуйста, сравните размер файла и контрольную сумму, чтобы "
-"удостовериться в целостности данных.<br /> Нажмите \"Продолжить\", чтобы "
-"начать процедуру обновления прошивки."
-
-msgid "The following changes have been committed"
-msgstr "Данные изменения были применены"
-
-msgid "The following changes have been reverted"
-msgstr "Данные изменения были отвергнуты"
-
-msgid "The following rules are currently active on this system."
-msgstr "На данном устройстве активны следующие правила."
-
-msgid "The given network name is not unique"
-msgstr "Заданное имя сети не является уникальным"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"Оборудование не поддерживает несколько SSID, и, если вы продолжите, "
-"существующая конфигурация будет заменена."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-"Длина префикса IPv4 в битах, оставшееся будет использоваться в IPv6-адресах."
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "Длина префикса IPv6 в битах"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"Сетевые порты этого устройства могут быть объединены в несколько <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>ов, в которых компьютеры могут "
-"связываться напрямую между собой. <abbr title=\"Virtual Local Area Network"
-"\">VLAN</abbr>ы часто используются для разделения нескольких сетевых "
-"сегментов. Обычно по умолчанию используется один восходящий порт для "
-"подключения к высшей рангом сети, например к интернету или к другим портам "
-"локальной сети."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "Для выбранного протокола необходимо задать устройство"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"Идёт удаление раздела конфигурации с последующей перезагрузкой сиситемы."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"Система обновляется.<br /> НЕ ОТКЛЮЧАЙТЕ ПИТАНИЕ УСТРОЙСТВА!<br /> Подождите "
-"несколько минут перед тем, как попытаетесь заново соединиться. В зависимости "
-"от ваших настроек, возможно вам понадобится обновить адрес вашего "
-"компьютера, чтобы снова получить доступ к устройству."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"Загруженный файл образа не поддерживается. Пожалуйста, проверьте, что вы "
-"загрузили правильный образ для вашей платформы."
-
-msgid "There are no active leases."
-msgstr "Нет активных арендованных адресов."
-
-msgid "There are no pending changes to apply!"
-msgstr "Нет изменений, которые можно применить!"
-
-msgid "There are no pending changes to revert!"
-msgstr "Нет изменений, которые можно отменить!"
-
-msgid "There are no pending changes!"
-msgstr "Нет изменений, которые можно применить!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Устройство не назначено. Пожалуйста, назначьте сетевое устройство во вкладке "
-"\"Настройки канала\""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Пароль пользователя root не установлен. Пожалуйста, установите пароль, чтобы "
-"защитить веб-интерфейс и включить SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr "IPv4-адрес ретранслятора"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Это список шаблонов для соответствия файлов и директорий для сохранения при "
-"использовании sysupgrade. Изменённые файлы в /etc/config и некоторые другие "
-"конфигурации автоматически сохраняются."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"Это 32-байтный шестнадцатиричный идентификатор пользователя, не имя входа"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Это содержимое /etc/rc.local. Вы можете добавить свои команды (перед 'exit "
-"0'), чтобы выполнить их в конце загрузки."
-
-# Maybe it usually ends with ::2?
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"Это локальный адрес, назначенный туннельным брокером, обычно заканчивается "
-"на <code>:2</code>"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Это единственный <abbr title=\"Протокол динамической конфигурации узла"
-"\">DHCP</abbr>-сервер в локальной сети"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Это таблица cron (crontab), в которой вы можете определить запланированные "
-"задания."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr "Это адрес ближайшей точки присутствия туннельного брокера"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr "Данный список содержит работающие процессы и их статус."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "Данная страница позволяет настроить обработку кнопок"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Данная страница содержит обзор всех активных на данный момент сетевых "
-"соединений."
-
-msgid "This section contains no values yet"
-msgstr "Эта секция пока не содержит значений"
-
-msgid "Time Synchronization"
-msgstr "Синхронизация времени"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "Синхронизация времени ещё не настроена."
-
-msgid "Timezone"
-msgstr "Часовой пояс"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Чтобы восстановить файлы конфигурации, вы можете загрузить ранее созданный "
-"архив здесь."
-
-msgid "Total Available"
-msgstr "Всего доступно"
-
-msgid "Traceroute"
-msgstr "Трассировка"
-
-msgid "Traffic"
-msgstr "Трафик"
-
-msgid "Transfer"
-msgstr "Передача"
-
-msgid "Transmission Rate"
-msgstr "Скорость передачи"
-
-msgid "Transmit"
-msgstr "Передача"
-
-msgid "Transmit Power"
-msgstr "Мощность передатчика"
-
-msgid "Transmitter Antenna"
-msgstr "Передающая антенна"
-
-msgid "Trigger"
-msgstr "Триггер"
-
-msgid "Trigger Mode"
-msgstr "Режим срабатывания"
-
-msgid "Tunnel ID"
-msgstr "Идентификатор туннеля"
-
-msgid "Tunnel Interface"
-msgstr "Интерфейс туннеля"
-
-msgid "Turbo Mode"
-msgstr "Турбо-режим"
-
-msgid "Tx-Power"
-msgstr "Мощность передатчика"
-
-msgid "Type"
-msgstr "Тип"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "Только UMTS"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "USB-устройство"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Невозможно обработать запрос для"
-
-msgid "Unknown"
-msgstr "Неизвестно"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Неизвестная ошибка, пароль не был изменен!"
-
-msgid "Unmanaged"
-msgstr "Неуправляемый"
-
-msgid "Unsaved Changes"
-msgstr "Непринятые изменения"
-
-msgid "Unsupported protocol type."
-msgstr "Неподдерживаемый тип протокола."
-
-msgid "Update lists"
-msgstr "Обновить списки"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Загрузите sysupgrade-совместимый образ, чтобы заменить текущую прошивку. "
-"Установите флажок \"Сохранить настройки\", чтобы сохранить текущую "
-"конфигурацию (требуется совместимый с OpenWrt образ прошивки)."
-
-msgid "Upload archive..."
-msgstr "Загрузить архив..."
-
-msgid "Uploaded File"
-msgstr "Загруженный файл"
-
-msgid "Uptime"
-msgstr "Время работы"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Использовать <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Использовать шлюз DHCP"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Использовать объявляемые узлом DNS-серверы"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Использовать коды стран ISO/IEC 3166 alpha2."
-
-msgid "Use MTU on tunnel interface"
-msgstr "Использовать MTU на интерфейсе туннеля"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Использовать TTL на интерфейсе туннеля"
-
-msgid "Use as root filesystem"
-msgstr "Использовать в качестве корневой файловой системы"
-
-msgid "Use broadcast flag"
-msgstr "Использовать широковещательный флаг"
-
-msgid "Use custom DNS servers"
-msgstr "Использовать собственные DNS-серверы"
-
-msgid "Use default gateway"
-msgstr "Использовать шлюз по умолчанию"
-
-msgid "Use gateway metric"
-msgstr "Использовать метрику шлюза"
-
-msgid "Use preferred lifetime"
-msgstr "Использовать предпочитаемое время жизни"
-
-msgid "Use routing table"
-msgstr "Использовать таблицу маршрутизации"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Нажмите кнопку <em>Добавить</em>, чтобы добавить новую запись аренды. "
-"<em>MAC-адрес</em> идентифицирует хост, <em>IPv4-адрес</em> указывает "
-"фиксированный адрес, а <em>Имя хоста</em> присваивается в качестве "
-"символьного имени для запрашивающего хоста."
-
-msgid "Use valid lifetime"
-msgstr "Использовать действительное время жизни"
-
-msgid "Used"
-msgstr "Использовано"
-
-msgid "Used Key Slot"
-msgstr "Используемый слот ключа"
-
-msgid "Username"
-msgstr "Имя пользователя"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "Интерфейс VLAN"
-
-msgid "VLANs on %q"
-msgstr "VLANы на %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLANы на %q (%s)"
-
-msgid "VPN Server"
-msgstr "Сервер VPN"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-"Класс производителя (Vendor class), который отправлять при DHCP-запросах"
-
-msgid "Verify"
-msgstr "Проверить"
-
-msgid "Version"
-msgstr "Версия"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "Открытая система WEP"
-
-msgid "WEP Shared Key"
-msgstr "Общий ключ WEP"
-
-msgid "WEP passphrase"
-msgstr "Пароль WEP"
-
-msgid "WMM Mode"
-msgstr "Режим WMM"
-
-msgid "WPA passphrase"
-msgstr "Пароль WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"Необходимо установить wpa_supplicant (режим клиента) или hostapd (режим "
-"точки доступа или ad-hoc) для поддержки шифрования WPA."
-
-msgid "Waiting for changes to be applied..."
-msgstr "Ожидание применения изменений..."
-
-msgid "Waiting for command to complete..."
-msgstr "Ожидание завершения выполнения команды..."
-
-msgid "Warning"
-msgstr "Внимание"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-"Внимание: есть несохранённые изменения, которые потеряются после "
-"перезагрузки!"
-
-msgid "Wifi"
-msgstr "Wi-Fi"
-
-msgid "Wireless"
-msgstr "Wi-Fi"
-
-msgid "Wireless Adapter"
-msgstr "Беспроводной адаптер"
-
-msgid "Wireless Network"
-msgstr "Беспроводная сеть"
-
-msgid "Wireless Overview"
-msgstr "Обзор беспроводных сетей"
-
-msgid "Wireless Security"
-msgstr "Безопасность беспроводной сети"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Беспроводная сеть отключена или не связана "
-
-msgid "Wireless is restarting..."
-msgstr "Беспроводная сеть перезапускается..."
-
-msgid "Wireless network is disabled"
-msgstr "Беспроводная сеть отключена"
-
-msgid "Wireless network is enabled"
-msgstr "Беспроводная сеть включена"
-
-msgid "Wireless restarted"
-msgstr "Беспроводная сеть перезапущена"
-
-msgid "Wireless shut down"
-msgstr "Выключение беспроводной сети"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Записывать полученные DNS-запросы в системный журнал"
-
-msgid "XR Support"
-msgstr "Поддержка XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Здесь вы можете включить или выключить установленные скрипты инициализации. "
-"Изменения вступят в силу после перезагрузки устройства.<br /"
-"><strong>Внимание: если вы выключите один из основных скриптов инициализации "
-"(например \"network\"), ваше устройство может оказаться недоступным!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Вам необходимо включить Java Script в вашем браузере для корректной работы "
-"LuCI."
-
-msgid "any"
-msgstr "любой"
-
-msgid "auto"
-msgstr "авто"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "соед. мостом"
-
-msgid "create:"
-msgstr "создать:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "создаёт мост для выбранных сетевых интерфейсов"
-
-msgid "dB"
-msgstr "дБ"
-
-msgid "dBm"
-msgstr "дБм"
-
-msgid "disable"
-msgstr "выключено"
-
-msgid "expired"
-msgstr "истекло"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"файл, где храняться арендованные <abbr title=\"Протокол динамической "
-"конфигурации узла\">DHCP</abbr>-адреса"
-
-msgid "forward"
-msgstr "перенаправить"
-
-msgid "full-duplex"
-msgstr "полный дуплекс"
-
-msgid "half-duplex"
-msgstr "полудуплекс"
-
-msgid "help"
-msgstr "помощь"
-
-msgid "hidden"
-msgstr "скрытый"
-
-msgid "if target is a network"
-msgstr "если сеть"
-
-msgid "input"
-msgstr "ввод"
-
-msgid "kB"
-msgstr "кБ"
-
-msgid "kB/s"
-msgstr "кБ/с"
-
-msgid "kbit/s"
-msgstr "кбит/с"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "локальный <abbr title=\"Служба доменных имён\">DNS</abbr>-файл"
-
-msgid "no"
-msgstr "нет"
-
-msgid "no link"
-msgstr "нет соединения"
-
-msgid "none"
-msgstr "ничего"
-
-msgid "off"
-msgstr "выключено"
-
-msgid "on"
-msgstr "включено"
-
-msgid "open"
-msgstr "открытая"
-
-msgid "routed"
-msgstr "маршрутизируемый"
-
-msgid "tagged"
-msgstr "с тегом"
-
-msgid "unknown"
-msgstr "неизвестный"
-
-msgid "unlimited"
-msgstr "неограниченный"
-
-msgid "unspecified"
-msgstr "не определено"
-
-msgid "unspecified -or- create:"
-msgstr "не определено -или- создать:"
-
-msgid "untagged"
-msgstr "без тега"
-
-msgid "yes"
-msgstr "да"
-
-msgid "« Back"
-msgstr "« Назад"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Ожидание маршрутизатора..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Включить встроенный NTP-сервер"
-
-#~ msgid "Active Leases"
-#~ msgstr "Активные аренды"
-
-#~ msgid "Open"
-#~ msgstr "Открыть"
-
-#~ msgid "KB"
-#~ msgstr "KB"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Скорость передачи в битах"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Конфигурация / Применить"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Конфигурация / Изменения"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Конфигурация / Обратить изменения"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC Адрес"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Зашифрованно\">Шифрование</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr ""
-#~ "<abbr title=\"Беспроводная локальная сеть\">WLAN</abbr>-Сканирование"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Укажите сеть, которую вы хотите прикрепить к этому беспроводному "
-#~ "интерфейсу. Выберите <em>не определено</em> чтобы не прикреплять сеть или "
-#~ "заполните поле <em>создать</em> чтобы определить новую сеть."
-
-#~ msgid "Create Network"
-#~ msgstr "Создать сеть"
-
-#~ msgid "Link"
-#~ msgstr "Соединение"
-
-#~ msgid "Networks"
-#~ msgstr "Сети"
-
-#~ msgid "Power"
-#~ msgstr "Мощность"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Обзор существующих Wi-Fi сетей"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Беcклассовая адресация\">CIDR</abbr>-Обозначение: адрес/"
-#~ "префикс"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Служба Доменных Имён\">DNS</abbr>-Сервер"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr ""
-#~ "<abbr title=\"Интернет протокол версии 4\">IPv4</abbr>-Широковещательный"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Интернет протокол версии 6\">IPv6</abbr>-Адрес"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "IP псевдонимы"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Установки IPv6"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Заметка: Если здесь вы выберете интерфейс, который является частью другой "
-#~ "сети, то он будет перемещен в эту сеть."
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Вы действительно хотите удалить этот интерфейс? Удаление невозможно "
-#~ "отменить!\\nВы можете потерять доступ к этому маршрутизатору, если ваш "
-#~ "компьютер подключен через этот интерфейс."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Вы действительно хотите удалить эту беспроводную сеть? Удаление "
-#~ "невозможно отменить!\\nВы можете потерять доступ к этому маршрутизатору, "
-#~ "если ваш компьютер подключен через этот интерфейс."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Вы действительно хотите выключить интерфейс \"%s\" ?\\nВы можете потерять "
-#~ "доступ к этому маршрутизатору, если ваш компьютер подключен через этот "
-#~ "интерфейс."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Вы действительно хотите выключить сеть?\\nВы можете поторять соединения с "
-#~ "данным маршрутизатором при использовании этого интерфейса."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Сетевые порты на вашем маршрутизаторе могут быть объединены в несколько "
-#~ "<abbr title=\"Виртуальные локальные сети\">VLAN</abbr>&#32;ов, в которых "
-#~ "компьютеры могут напрямую общаться друг с другом. <abbr title="
-#~ "\"Виртуальные локальные сети\">VLAN</abbr>&#32;ы часто используются для "
-#~ "разделения сети на разные сегменты. Обычно один исходящий порт "
-#~ "используется для соединения с другой сетью, такой например, как интернет, "
-#~ "а остальные порты используются для локальной сети."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Включить буферизацию"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6 через IPv4"
-
-#~ msgid "Custom Files"
-#~ msgstr "Пользовательские файлы"
-
-#~ msgid "Custom files"
-#~ msgstr "Пользовательские файлы"
-
-#~ msgid "Detected Files"
-#~ msgstr "Найденные файлы"
-
-#~ msgid "Detected files"
-#~ msgstr "Найденные файлы"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Файлы которые необходимо сохранить при обновлении прошивки"
-
-#~ msgid "General"
-#~ msgstr "Основные"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Здесь вы можете изменить настройки и функциональность <abbr title=\"Lua "
-#~ "Конфигурационный Интерфейс\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Запуск команд"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr ""
-#~ "Эти файлы были найдены системой и будут автоматически сохранены во время "
-#~ "обновления прошивки"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Эти команды будут запущенны автоматически когда данная <abbr title="
-#~ "\"Единый Конфигурационный Интерфейс\">UCI</abbr> конфигурация добавлена и "
-#~ "изменения будут приняты."
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr ""
-#~ "Это список дополнительных файлов и директорий (допустимо использование "
-#~ "регулярных выражений) которые будут сохранены во время обновления прошивки"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"Интерфейс пользователя\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Туннельный протокол типа точка-точка\">PPTP</abbr>-Сервер"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "AHCP Настройки"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "Количество ARP попыток"
-
-#~ msgid "ATM Settings"
-#~ msgstr "Настройки ATM"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Точка доступа (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Дополнительные настройки pppd"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "Разрешен диапазон от 1 до FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Автоматическое разъединение"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Резервная копия"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Настроить локальный DNS сервер таким образом, чтобы он использовал DNS "
-#~ "серверы полученные от PPP пира"
-
-#~ msgid "Connect script"
-#~ msgstr "Скрипт подключения"
-
-#~ msgid "Create backup"
-#~ msgstr "Создать резервную копию"
-
-#~ msgid "Default"
-#~ msgstr "По умолчанию"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Скрипт разъединения"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Изменить список пакетов и путей установки"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "Включить 4K VLANы"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Активировать IPv6 в PPP соединении"
-
-#~ msgid "Firmware image"
-#~ msgstr "Прошивка"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "Перенаправлять DHCP"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "Перенаправлять широковещательные сообщения"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "ID Туннеля HE.net"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Здесь вы можете сделать резервную копию и восстановить конфигурацию "
-#~ "вашего маршрутизатора, если это возможно, или установить настройки по "
-#~ "умолчанию."
-
-#~ msgid "Installation targets"
-#~ msgstr "Путь установки"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Сохранить конфигурационные файлы"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Keep-Alive"
-
-#~ msgid "Kernel"
-#~ msgstr "Ядро"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Позволить pppd после успешного соединения изменить маршрут по умолчанию "
-#~ "для использования PPP интерфейса"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "Позволить pppd запустить скрипт после установления PPP соединения"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Позволить pppd запустить скрипт до установления PPP соединения"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Удостоверьтесь, что вы ввели корректный пин код, иначе вы можете "
-#~ "заблокировать вашу сим карту!"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "Большинство из них сетевые серверы, которые выполняют определённые задачи "
-#~ "для ваших устройств или сетей наподобие shell-доступа, web-страниц таких "
-#~ "как <abbr title=\"Lua Configuration Interface\">LuCI</abbr>, выполняют "
-#~ "mesh-маршрутизацию, отправляют письма , ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr ""
-#~ "Количество неудачных соединений для инициализации переподсоединения к "
-#~ "серверу"
-
-#~ msgid "Override Gateway"
-#~ msgstr "Переопределение шлюза"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN код"
-
-#~ msgid "PPP Settings"
-#~ msgstr "Настройки PPP"
-
-#~ msgid "Package lists"
-#~ msgstr "Список пакетов"
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "PVIDы порта на %q"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr ""
-#~ "Перейти к возврашению всех настроек и установить настройки по умолчанию?"
-
-#~ msgid "Processor"
-#~ msgstr "Процессор"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-Порт"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-Сервер"
-
-#~ msgid "Replace default route"
-#~ msgstr "Заменить маршрут по умолчанию"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Сбросить маршрутизатор к настройкам по умолчанию"
-
-#~ msgid "Routing table ID"
-#~ msgstr "ID таблицы маршрутизации"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "Таймаут в секундах перед попыткой соединения"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "IPv4-Адрес сервера"
-
-#~ msgid "Service type"
-#~ msgstr "Тип службы"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "Сервисы и демоны выполняют определённые задачи на вашем устройстве."
-
-#~ msgid "Settings"
-#~ msgstr "Настройки"
-
-#~ msgid "Setup wait time"
-#~ msgstr "Установить время ожидания"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Извините. OpenWrt не поддерживает обновление прошивки на данном "
-#~ "устройстве.<br /> Вам необходимо вручную обновить прошивку."
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Укажите дополнительные аргументы pppd"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "Файл устройства вашего модема, например /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr ""
-#~ "Время (в сек.) после которого неиспользованное соединение будет закрыто"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "Серверы синхронизации времени (rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "Настройки туннелирования"
-
-#~ msgid "Update package lists"
-#~ msgstr "Обновить список пакетов"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Загрузите образ OpenWRT чтобы обновить прошивку устройства."
-
-#~ msgid "Upload image"
-#~ msgstr "Загрузить образ"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Использовать DNS пиров"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr ""
-#~ "Вы можете указать несколько DNS серверов, нажмите Enter чтобы добавить "
-#~ "новую запись. Введенные серверы переопределят адреса, назначенные "
-#~ "автоматически."
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Вам необходимо установить \"comgt\" для поддержки UMTS/GPRS, \"ppp-mod-"
-#~ "pppoe\" для PPPoE, \"ppp-mod-pppoa\" для PPPoA и \"pptp\" для PPtP"
-
-#~ msgid "back"
-#~ msgstr "назад"
-
-#~ msgid "buffered"
-#~ msgstr "буфферизовано"
-
-#~ msgid "cached"
-#~ msgstr "кэшировано"
-
-#~ msgid "free"
-#~ msgstr "свободно"
-
-#~ msgid "static"
-#~ msgstr "статический"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Конфигурационный Интерфейс\">LuCI</abbr> это свободное "
-#~ "Lua програмное обеспечение включая <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Вебфреймворк и веб интерфейс встраиваемый в устройства. "
-#~ "<abbr title=\"Lua Конфигурационный Интерфейс\">LuCI</abbr> "
-#~ "распространяется под лицензией Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-Ключи"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Простой HTTP/1.1 веб-сервер для LuCI, реализованный на \"Си\" и \"Lua\""
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Маленький веб-сервер, служащий для предоставления <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "О программе"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "Активные IP соединения"
-
-#~ msgid "Addresses"
-#~ msgstr "Адреса"
-
-#~ msgid "Admin Password"
-#~ msgstr "Пароль администратора"
-
-#~ msgid "Alias"
-#~ msgstr "Псевдоним"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Аутентификационная область"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Порт моста"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr ""
-#~ "Изменение пароля системного администратора (Пользователь <code>root</"
-#~ "code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Клиент + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Файл конфигурации"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Таймаут подключения"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Помогавшие в разработке"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "Присвоенный DHCP"
-
-#~ msgid "Document root"
-#~ msgstr "Корневая папка"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Включить Keep-Alive"
-
-#~ msgid "Enable device"
-#~ msgstr "Включить устройство"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Ethernet Мост"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "Здесь вы можете указать публичный <abbr title=\"Secure Shell\">SSH</abbr>-"
-#~ "Ключ (один на строку) для <abbr title=\"Secure Shell\">SSH</abbr> "
-#~ "публичной-ключевой аутентификации."
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP Конфигурация"
-
-#~ msgid "Interface Status"
-#~ msgstr "Статус интерфейса"
-
-#~ msgid "Lead Development"
-#~ msgstr "Ведущие разработчики"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "На этом интерфейсе не сконфигурирован адрес."
-
-#~ msgid "Not configured"
-#~ msgstr "Не настроенный"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Пароль успешно изменён"
-
-#~ msgid "Plugin path"
-#~ msgstr "Путь к плагину"
-
-#~ msgid "Ports"
-#~ msgstr "Порты"
-
-#~ msgid "Primary"
-#~ msgstr "Первичный"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Домашняя страница проекта"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Псевдо Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Благодаря"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr "Что будет показано при авторизации на защищённых страницах."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Неизвестная ошибка"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "по умолчанию <code>/etc/httpd.conf</code>"
-
-#~ msgid "Enable this switch"
-#~ msgstr "Включить этот сетевой коммутатор"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "Код ошибки OPKG %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Список пакетов обновлён"
-
-#~ msgid "Reset switch during setup"
-#~ msgstr "Сбросить коммутатор во время настройки"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "Заменить установленные пакеты"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "А так же ядра или сервисов, системный журнал может быть так же просмотрен "
-#~ "здесь для того что бы получить полный обзор текущего состояния системы."
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Здесь вы можете найти информацию о текущей статистики системы вроде "
-#~ "частоты процессора, использования памяти или сетевого интерфейса."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Конфигурационный Интерфейс\">LuCI</abbr> свободный, "
-#~ "гибкий и дружелюбный графический интерфейс для настройки OpenWrt Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "А теперь повеселитесь со своим роутером!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Так же мы всегда желаем улучшить этот интерфейс, мы всегда обратим "
-#~ "внимание на ваши вопросы и предложения."
-
-#~ msgid "Hello!"
-#~ msgstr "Добро пожаловать."
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Внимание: В <abbr title=\"Lua Конфигурационный Интерфейс\">LuCI</abbr> "
-#~ "изменения принимаются после нажатия  - Принять."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "С помощью этих страниц вы можете изменить основные настройки вашего "
-#~ "роутера."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "Команда <abbr title=\"Lua Конфигурационный Интерфейс\">LuCI</abbr>"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Это зона управления <abbr title=\"Lua Конфигурационный Интерфейс\">LuCI</"
-#~ "abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Пользовательский интерфейс"
-
-#~ msgid "enable"
-#~ msgstr "включено"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr " (дополнительно)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Служба доменных имён\">DNS</abbr>-Port"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "<abbr title=\"Служба доменных имён\">DNS</abbr>-Сервер будет обращаться к "
-#~ "resolvfile"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Протокол динамической "
-#~ "конфигурации узла\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> paket size"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Расширенный механизм "
-#~ "службы доменных имён\">EDNS0</abbr> размер пакета"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP-Isolation"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Добавить Wifi сеть в физическую сеть"
-
-#~ msgid "Aliases"
-#~ msgstr "Ссылка"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#~ msgid "Devices"
-#~ msgstr "Устройства"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "не форвардить реверсные-днс запросы для локальной сети"
-
-#~ msgid "Errors"
-#~ msgstr "Ошибок"
-
-#~ msgid "Essentials"
-#~ msgstr "Essentials"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Expand Hosts"
-
-#~ msgid "First leased address"
-#~ msgstr "Первый арендованный адрес"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Адрес устройства"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Здесь вы можете настроить установленные Wi-Fi устройства."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Ignore <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Незаыисимая (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Интернет соединение"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Присоединиться (Client)"
-
-#~ msgid "Leases"
-#~ msgstr "Leases"
-
-#~ msgid "Local Domain"
-#~ msgstr "Локальный домен"
-
-#~ msgid "Local Network"
-#~ msgstr "Локальная сеть"
-
-#~ msgid "Local Server"
-#~ msgstr "Локальный сервер"
-
-#, fuzzy
-#~ msgid "Network Boot Image"
-#~ msgstr "<abbr title=\"Служба доменных имён\">DNS</abbr>-Port"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Название сети (<abbr title=\"Расширенный идентификатор сети\">ESSID</"
-#~ "abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Количество арендованных адресов"
-
-#~ msgid "Path"
-#~ msgstr "Путь"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Принять изменения"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Не позволяет клиентам обмениваться друг с другом информацией"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Обеспечивает (AP)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Resolvfile"
-
-#, fuzzy
-#~ msgid "TFTP-Server Root"
-#~ msgstr "<abbr title=\"Служба доменных имён\">DNS</abbr>-Port"
-
-#~ msgid "TX / RX"
-#~ msgstr "Перед. / Получ."
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Данные изменения были приняты"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "После перепрошивки <abbr title=\"Lua Конфигурационный Интерфейс\">LuCI</"
-#~ "abbr> эти файлы будут добавлены в обновлённую систему ."
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "С помощью <abbr title=\"Протокол динамической конфигурации узла\">DHCP</"
-#~ "abbr> члены сетей могут автоматически получить такие настройки как (<abbr "
-#~ "title=\"Интернет протокол\">IP</abbr>-Адрес, сетевую маску, <abbr title="
-#~ "\"Служба доменных имён\">DNS</abbr>-имя, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Вы можете настраивать различные wifi сети на одном устройстве. Помните "
-#~ "что есть определённые програмные и аппаратные ограничения. Нормально вы "
-#~ "можете использовать например 1 Ad-Hoc или до 3 Точек и симулированных 1 "
-#~ "Клиента."
-
-#, fuzzy
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr "Ошибок"
-
-#~ msgid "additional hostfile"
-#~ msgstr "дополнительный hostfile"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "Добавлять доменные имена в хосты"
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "статический"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "автоматически переподсоединятся"
-
-#~ msgid "concurrent queries"
-#~ msgstr "concurrent queries"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "отключить <abbr title=\"Протокол динамической конфигурации узла\">DHCP</"
-#~ "abbr> для данного интерфейса"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "отсоединиться когда простой для"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "Don&#39;t cache unknown"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "фильтровать ненужные <abbr title=\"Служба доменных имён\">DNS</abbr>-"
-#~ "запросы Windows-систем"
-
-#~ msgid "installed"
-#~ msgstr "установленные"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "локализировать имя хоста относящегося к данной подсети"
-
-#~ msgid "not installed"
-#~ msgstr "не установленно"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "Запрещать кешировать негативные <abbr title=\"Служба доменных имён\">DNS</"
-#~ "abbr>-ответы"
-
-#~ msgid "query port"
-#~ msgstr "порт запросов"
-
-#~ msgid "transmitted / received"
-#~ msgstr "передано / получено"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "Локальная сеть"
-
-#~ msgid "all"
-#~ msgstr "Все"
-
-#~ msgid "Code"
-#~ msgstr "Код"
-
-#~ msgid "Distance"
-#~ msgstr "Расстояние"
-
-#~ msgid "Legend"
-#~ msgstr "Надпись"
-
-#~ msgid "Library"
-#~ msgstr "Библиотека"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "смотрите &#39;%s&#39; руководство"
-
-#~ msgid "Package Manager"
-#~ msgstr "Менеджер пакетов"
-
-#~ msgid "Service"
-#~ msgstr "Сервис"
-
-#~ msgid "Statistics"
-#~ msgstr "Статистика"
-
-#~ msgid "zone"
-#~ msgstr "Зона"
diff --git a/po/ru/commands.po b/po/ru/commands.po
deleted file mode 100644
index 87841dd..0000000
--- a/po/ru/commands.po
+++ /dev/null
@@ -1,95 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-20 15:23+0200\n"
-"Last-Translator: Kamal <kamal.aliev@epscom.ru>\n"
-"Language-Team: none\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr "Короткое текстовое описание команды"
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr "Аргументы:"
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr "Сбор данных..."
-
-msgid "Command"
-msgstr "Команда"
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr "Команда выполнена"
-
-msgid "Command:"
-msgstr "Команда:"
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr "Описание"
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr "Загрузка"
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/ru/coovachilli.po b/po/ru/coovachilli.po
deleted file mode 100644
index 379ff7e..0000000
--- a/po/ru/coovachilli.po
+++ /dev/null
@@ -1,560 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: coovachilli\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 11:29+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Конфигурация сети"
-
-msgid "RADIUS configuration"
-msgstr "Конфигурация RADIUS"
-
-msgid "UAM and MAC Authentication"
-msgstr "Аутентификация с помощью UAM и MAC"
-
-#~ msgid "General configuration"
-#~ msgstr "Общие настройки"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Общие настройки CoovaChilli"
-
-#~ msgid "Command socket"
-#~ msgstr "Сокет команд"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "UNIX сокет для связи с chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Интервал обновления конфигурации"
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Считывание файла конфигурации и запуск DNS поиска раз в указанный "
-#~ "интервал. Достигается тот же эффект что и при отсылке HUP сигнала. "
-#~ "Значение интервала выражено в секундах. В случае указания нулевого "
-#~ "значения интервала, данная функция становится неактивной."
-
-#~ msgid "Pid file"
-#~ msgstr "Pid файл"
-
-#~ msgid "Filename to put the process id"
-#~ msgstr "Имя файла, который будет содержать идентификатор процесса (PID)"
-
-#~ msgid "State directory"
-#~ msgstr "Директория состояния"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "TUN/TAP конфигурация"
-
-#~ msgid "Network down script"
-#~ msgstr "Скрипт выключения сети"
-
-#~ msgid "Network up script"
-#~ msgstr "Скрипт включения сети"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Первичный DNS сервер"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Вторичный DNS сервер"
-
-#~ msgid "Domain name"
-#~ msgstr "Доменное имя"
-
-#~ msgid ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-#~ msgstr "Используется, чтобы сообщить клиенту имя домена при DNS поисках"
-
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Диапазон динамических IP адресов"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Определяет диапазон динамических IP адресов"
-
-#~ msgid "IP down script"
-#~ msgstr "Скрипт сброса IP-адреса"
-
-#~ msgid "IP up script"
-#~ msgstr "Скрипт установки IP-адреса"
-
-#~ msgid ""
-#~ "Script executed after the TUN/TAP network interface has been brought up"
-#~ msgstr "Скрипт, выполняемый после включения сетевого интерфейса TUN/TAP"
-
-#~ msgid "Uplink subnet"
-#~ msgstr "Подсеть uplink'а"
-
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr "Сетевой адрес uplink-интерфейса (в нотации CIDR)"
-
-#~ msgid "Static IP address pool"
-#~ msgstr "Диапазон статических IP адресов"
-
-#~ msgid "Specifies a pool of static IP addresses"
-#~ msgstr "Определяет диапазон статических IP адресов"
-
-#~ msgid "TUN/TAP device"
-#~ msgstr "TUN/TAP устройство"
-
-#~ msgid "The specific device to use for the TUN/TAP interface"
-#~ msgstr "Устройство для TUN/TAP интерфейса"
-
-#~ msgid "TX queue length"
-#~ msgstr "Длина очереди TX"
-
-#~ msgid "The TX queue length to set on the TUN/TAP interface"
-#~ msgstr "Длина TX очереди TUN/TAP интерфейса"
-
-#~ msgid "Use TAP device"
-#~ msgstr "Использовать устройство TAP"
-
-#~ msgid "Use the TAP interface instead of TUN"
-#~ msgstr "Использовать интерфейс TAP вместо TUN"
-
-#~ msgid "DHCP configuration"
-#~ msgstr "Настройки DHCP"
-
-#~ msgid "Set DHCP options for connecting clients"
-#~ msgstr "Установите параметры DHCP для подключения клиентов"
-
-#~ msgid "DHCP end number"
-#~ msgstr "Конечное значение DHCP"
-
-#~ msgid "DHCP interface"
-#~ msgstr "DHCP интерфейс"
-
-#~ msgid "Ethernet interface to listen to for the downlink interface"
-#~ msgstr "Ethernet интерфейс для прослушивания downlink-интерфеса"
-
-#~ msgid "Listen MAC address"
-#~ msgstr "Прослушиваемые MAC адреса"
-
-#~ msgid "DHCP start number"
-#~ msgstr "Начальное значение DHCP"
-
-#~ msgid "Where to start assigning IP addresses (default 10)"
-#~ msgstr "Начать присвоения IP-адресов с (по умолчанию 10)"
-
-#~ msgid "Enable IEEE 802.1x"
-#~ msgstr "Включить IEEE 802.1x"
-
-#~ msgid "Enable IEEE 802.1x authentication and listen for EAP requests"
-#~ msgstr "Включить IEEE 802.1x аутентификацию и обработку запросов EAP"
-
-#~ msgid "Leasetime"
-#~ msgstr "Время аренды"
-
-#~ msgid "Use a DHCP lease of seconds (default 600)"
-#~ msgstr "Использовать DHCP аренду заданное время (секунды, 600 по умолчанию)"
-
-#~ msgid "Allow session update through RADIUS"
-#~ msgstr "Разрешить обновление сессии через RADIUS"
-
-#~ msgid ""
-#~ "Allow updating of session parameters with RADIUS attributes sent in "
-#~ "Accounting-Response"
-#~ msgstr ""
-#~ "Разрешить обновление параметров сессии используя RADIUS атрибуты "
-#~ "посланные через Accounting-Response"
-
-#~ msgid "Admin password"
-#~ msgstr "Пароль администратора"
-
-#~ msgid ""
-#~ "Password to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Пароль администратора для аутентификации пользователя и применения "
-#~ "настроек chilli с созданием \"системной\" сессии устройства"
-
-#~ msgid "Admin user"
-#~ msgstr "Администратор"
-
-#~ msgid ""
-#~ "User-name to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Имя администратора для аутентификации пользователя и применения настроек "
-#~ "chilli с созданием \"системной\" сессии устройства"
-
-#~ msgid "Do not check disconnection requests"
-#~ msgstr "Не проверять запросы на разъединение"
-
-#~ msgid "Do not check the source IP address of radius disconnect requests"
-#~ msgstr "Не проверять IP-адрес запросов разъединения radius"
-
-#~ msgid "RADIUS disconnect port"
-#~ msgstr "Порт разъединения RADIUS"
-
-#~ msgid "UDP port to listen to for accepting radius disconnect requests"
-#~ msgstr "UDP порт для запросов разъединения RADIUS"
-
-#~ msgid "NAS IP"
-#~ msgstr "IP-адрес NAS"
-
-#~ msgid "Value to use in RADIUS NAS-IP-Address attribute"
-#~ msgstr "Значение RADIUS NAS-IP-Address атрибута"
-
-#~ msgid "NAS MAC"
-#~ msgstr "MAC адрес NAS"
-
-#~ msgid "MAC address value to use in RADIUS Called-Station-ID attribute"
-#~ msgstr "Значение MAC адреса RADIUS Called-Station-ID атрибута"
-
-#~ msgid "Allow OpenID authentication"
-#~ msgstr "Разрешить OpenID аутентификацию"
-
-#~ msgid ""
-#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
-#~ "openidauth in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Разрешает аутентификацию OpenID, посылая ChilliSpot-Config=allow-"
-#~ "openidauth в запросах доступа RADIUS."
-
-#~ msgid "RADIUS accounting port"
-#~ msgstr "Порт RADIUS Accounting"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius accounting requests (default 1813)"
-#~ msgstr "Порт UDP для запросов RADIUS Accounting (1813 по умолчанию)"
-
-#~ msgid "RADIUS authentication port"
-#~ msgstr "Порт аутентификации RADIUS"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius authentication requests (default "
-#~ "1812)"
-#~ msgstr "UDP порт для запросов аутентификации radius (1812 по умолчанию)"
-
-#~ msgid "RADIUS listen address"
-#~ msgstr "Слушающий адрес RADIUS"
-
-#~ msgid "Local interface IP address to use for the radius interface"
-#~ msgstr "IP адрес локального интерфейса для интерфейса radius"
-
-#~ msgid "RADIUS location ID"
-#~ msgstr "Идентификатор расположения RADIUS"
-
-#~ msgid "WISPr Location ID"
-#~ msgstr "Идентификатор расположения WISPr"
-
-#~ msgid "RADIUS location name"
-#~ msgstr "Имя расположения RADIUS"
-
-#~ msgid "WISPr Location Name"
-#~ msgstr "Имя расположения WISPr"
-
-#~ msgid "NAS ID"
-#~ msgstr "Идентификатор NAS"
-
-#~ msgid "Network access server identifier"
-#~ msgstr "Идентификатор сервера доступа к сети (NAS)"
-
-#~ msgid "Option radiusnasip"
-#~ msgstr "Опция radiusnasip"
-
-#~ msgid "NAS port type"
-#~ msgstr "Тип порта NAS"
-
-#~ msgid ""
-#~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
-#~ msgstr "Значение аттрибута NAS-Port-Type. По умолчанию 19 (IEEE-802.11)"
-
-#~ msgid "Send RADIUS VSA"
-#~ msgstr "Отсылать RADIUS VSA"
-
-#~ msgid "Send the ChilliSpot-OriginalURL RADIUS VSA in Access-Request"
-#~ msgstr "Отсылать ChilliSpot-OriginalURL RADIUS VSA в запросах доступа"
-
-#~ msgid "RADIUS secret"
-#~ msgstr "Секрет RADIUS"
-
-#~ msgid "Radius shared secret for both servers"
-#~ msgstr "Общий секрет RADIUS для обоих серверов"
-
-#~ msgid "RADIUS server 1"
-#~ msgstr "RADIUS сервер 1"
-
-#~ msgid "The IP address of radius server 1"
-#~ msgstr "IP адрес RADIUS сервера 1"
-
-#~ msgid "RADIUS server 2"
-#~ msgstr "RADIUS сервер 2"
-
-#~ msgid "The IP address of radius server 2"
-#~ msgstr "IP адрес RADIUS сервера 2"
-
-#~ msgid "Swap octets"
-#~ msgstr "Переставлять октеты"
-
-#~ msgid ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
-#~ "to RADIUS attribtues"
-#~ msgstr "Менять местами значения \"входной октет\" и \"выходной октет\""
-
-#~ msgid "Allow WPA guests"
-#~ msgstr "Разрешить гостевой WPA вход"
-
-#~ msgid ""
-#~ "Allows WPA Guest authentication by sending ChilliSpot-Config=allow-wpa-"
-#~ "guests in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Разрешает гстевую WPA аутентификацию, отсылая ChilliSpot-Config=allow-wpa-"
-#~ "guests в запросах доступа RADIUS"
-
-#~ msgid "Proxy client"
-#~ msgstr "Клиент прокси"
-
-#~ msgid ""
-#~ "IP address from which radius requests are accepted. If omitted the server "
-#~ "will not accept radius requests"
-#~ msgstr ""
-#~ "IP адрес с которого запросы radius принимаются. Если не указан, то сервер "
-#~ "не будет принимать запросы radius"
-
-#~ msgid "Local interface IP address to use for accepting radius requests"
-#~ msgstr "IP адрес локального интерфейса для приема запросов radius"
-
-#~ msgid "Proxy port"
-#~ msgstr "Порт прокси"
-
-#~ msgid "UDP Port to listen to for accepting radius requests"
-#~ msgstr "Порт UDP для запросов RADIUS"
-
-#~ msgid "Proxy secret"
-#~ msgstr "Секрет прокси"
-
-#~ msgid "Radius shared secret for clients"
-#~ msgstr "Общий RADIUS секрет для клиентов"
-
-#~ msgid "UAM configuration"
-#~ msgstr "Конфигурация UAM"
-
-#~ msgid "Unified Configuration Method settings"
-#~ msgstr "Настройки UAM"
-
-#~ msgid "Use Chilli XML"
-#~ msgstr "Использовать Chilli XML"
-
-#~ msgid "Return the so-called Chilli XML along with WISPr XML"
-#~ msgstr "Возвращать так называемый Chilli XML вместе с WISPr XML"
-
-#~ msgid "Default idle timeout"
-#~ msgstr "Таймаут ожидания по умолчанию"
-
-#~ msgid "Default idle timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Таймаут ожидания по умолчанию если не установлен RADIUS'ом (0 по "
-#~ "умолчанию)"
-
-#~ msgid "Default session timeout"
-#~ msgstr "Таймаут сессии (значение по умолчанию)"
-
-#~ msgid ""
-#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Таймаут сессии по умолчанию если не установлено RADIUS'ом (0 по умолчанию)"
-
-#~ msgid "Inspect DNS traffic"
-#~ msgstr "Инспектировать траффик DNS"
-
-#~ msgid ""
-#~ "Inspect DNS packets and drop responses with any non- A, CNAME, SOA, or MX "
-#~ "records to prevent dns tunnels (experimental)"
-#~ msgstr ""
-#~ "Проверять DNS пакеты и отбрасывать ответы без A, CNAME, SOA, или MX "
-#~ "записей для предотвращения DNS туннелей (экспериментальная ф-ция)."
-
-#~ msgid "Local users file"
-#~ msgstr "Локальный файл пользователей"
-
-#~ msgid ""
-#~ "A colon seperated file containing usernames and passwords of locally "
-#~ "authenticated users"
-#~ msgstr ""
-#~ "Файл, содержащий логины и пароли локально авторизованных пользователей "
-#~ "(записи разделены двоеточием)"
-
-#~ msgid "Location name"
-#~ msgstr "Имя расположения"
-
-#~ msgid "Human readable location name used in JSON interface"
-#~ msgstr "Имя расположения, используемой в интерфейсе JSON"
-
-#~ msgid "Do not redirect to UAM server"
-#~ msgstr "Не перенаправлять на сервер UAM"
-
-#~ msgid ""
-#~ "Do not return to UAM server on login success, just redirect to original "
-#~ "URL"
-#~ msgstr ""
-#~ "Не возвращаться на UAM сервер при удачном входе, перенаправить на "
-#~ "исходный URL"
-
-#~ msgid "Do not do WISPr"
-#~ msgstr "Не выполнять WISPr"
-
-#~ msgid "Do not do any WISPr XML, assume the back-end is doing this instead"
-#~ msgstr "Не выполнять WISPr XML, предполагая выполнение в бэкенд'е"
-
-#~ msgid "Post auth proxy"
-#~ msgstr "Прокси пост-аутентификации"
-
-#~ msgid ""
-#~ "Used with postauthproxyport to define a post authentication HTTP proxy "
-#~ "server"
-#~ msgstr ""
-#~ "Используется с портом прокси пост-аутентификации для определения HTTP "
-#~ "прокси-сервера аутентификации"
-
-#~ msgid "Post auth proxy port"
-#~ msgstr "Порт прокси пост-аутентификации"
-
-#~ msgid ""
-#~ "Used with postauthproxy to define a post authentication HTTP proxy server"
-#~ msgstr ""
-#~ "Ипользуется с прокси пост-аутентификации для определения HTTP прокси-"
-#~ "сервера пост-аутентификации"
-
-#~ msgid "Allowed resources"
-#~ msgstr "Разрешенные ресурсы"
-
-#~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr ""
-#~ "Список ресурсов к которым клиент может получить доступ без "
-#~ "предварительной аутентификации"
-
-#~ msgid "Allow any DNS server"
-#~ msgstr "Разрешить любой DNS сервер"
-
-#~ msgid "Allow any DNS server for unauthenticated clients"
-#~ msgstr "Разрешить любой DNS сервер для клиентов не прошедших аутентификацию"
-
-#~ msgid "Allow any IP address"
-#~ msgstr "Разрешить любой IP-адрес"
-
-#~ msgid ""
-#~ "Allow clients to use any IP settings they wish by spoofing ARP "
-#~ "(experimental)"
-#~ msgstr ""
-#~ "Разрешить клиентам использовать любые настройки IP за счет \"спуфинга\" "
-#~ "ARP (экспериментальная ф-ция)"
-
-#~ msgid "Allowed domains"
-#~ msgstr "Разрешенные домены"
-
-#~ msgid "UAM homepage"
-#~ msgstr "Домашняя страница UAM"
-
-#~ msgid "URL of homepage to redirect unauthenticated users to"
-#~ msgstr ""
-#~ "URL домашней страницы для перенаправления пользователей не прошедших "
-#~ "аутентификацию"
-
-#~ msgid "UAM static content port"
-#~ msgstr "Порт UAM статического контента"
-
-#~ msgid "UAM listening address"
-#~ msgstr "Слашающий адрес UAM"
-
-#~ msgid "IP address to listen to for authentication of clients"
-#~ msgstr "IP адрес для приема аутентификации клиентов"
-
-#~ msgid "UAM logout IP"
-#~ msgstr "IP-адрес выхода UAM"
-
-#~ msgid "UAM listening port"
-#~ msgstr "Слушающий порт UAM"
-
-#~ msgid "UAM secret"
-#~ msgstr "Секрет UAM"
-
-#~ msgid "Shared secret between uamserver and chilli"
-#~ msgstr "Общий секрет для сервера UAM и Chilli"
-
-#~ msgid "UAM server"
-#~ msgstr "Сервер UAM"
-
-#~ msgid "URL of web server to use for authenticating clients"
-#~ msgstr "URL или веб-сервер для аутентификации клиентов"
-
-#~ msgid "UAM user interface"
-#~ msgstr "Интерфейс пользователя UAM"
-
-#~ msgid "Use status file"
-#~ msgstr "Использовать статус-файл"
-
-#~ msgid "WISPr login url"
-#~ msgstr "URL входа WISPr"
-
-#~ msgid "Specific URL to be given in WISPr XML LoginURL"
-#~ msgstr "Особый URL в WISPr XML LoginURL"
-
-#~ msgid "CGI program"
-#~ msgstr "Программа GCI"
-
-#~ msgid "Web content directory"
-#~ msgstr "Директория Web-контента"
-
-#~ msgid "Directory where embedded local web content is placed"
-#~ msgstr "Директория куда будет помещен встроенный Web-контент"
-
-#~ msgid "MAC configuration"
-#~ msgstr "Настройка MAC"
-
-#~ msgid "Configure MAC authentication"
-#~ msgstr "Настройка аутентификации по MAC адресу"
-
-#~ msgid "Allowed MAC addresses"
-#~ msgstr "Разрешенные MAC адреса"
-
-#~ msgid "List of MAC addresses for which MAC authentication will be performed"
-#~ msgstr "Список MAC адресов для которых будет производиться аутентификация"
-
-#~ msgid "Authenticate locally allowed MACs"
-#~ msgstr "Аутентифицировать локально разрешенные MAC адреса"
-
-#~ msgid "Authenticate allowed MAC addresses without the use of RADIUS"
-#~ msgstr "Аутентифицировать разрешенные MAC адреса без использования RADIUS"
-
-#~ msgid "Enable MAC authentification"
-#~ msgstr "Разрешить MAC аутентификацию"
-
-#~ msgid "Try to authenticate all users based on their mac address alone"
-#~ msgstr ""
-#~ "Пробовать аутентификацию всех пользователей только на основе их MAC "
-#~ "адресов"
-
-#~ msgid "Password"
-#~ msgstr "Пароль"
-
-#~ msgid "Password used when performing MAC authentication"
-#~ msgstr "Пароль для MAC аутентификации"
-
-#~ msgid "Suffix"
-#~ msgstr "Суффикс"
-
-#~ msgid ""
-#~ "Suffix to add to the MAC address in order to form the User-Name, which is "
-#~ "sent to the radius server"
-#~ msgstr ""
-#~ "Суффикс, добавляемый в MAC адрес, для формирования имени пользователя, "
-#~ "которое посылается radius серверу"
diff --git a/po/ru/ddns.po b/po/ru/ddns.po
deleted file mode 100644
index 558a2a8..0000000
--- a/po/ru/ddns.po
+++ /dev/null
@@ -1,92 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: ddns\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-11-01 21:54+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Check for changed IP every"
-msgstr "Проверять, изменился ли IP адрес каждые"
-
-msgid "Check-time unit"
-msgstr "Единица измерения проверки"
-
-msgid "Custom update-URL"
-msgstr "Пользовательский URL обновления"
-
-msgid "Dynamic DNS"
-msgstr "Динамический DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Динамический DNS позволяет вашему маршрутизатору иметь постоянное доменное "
-"имя при динамическом IP-адресе."
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "Event interface"
-msgstr "Интерфейс события"
-
-msgid "Force update every"
-msgstr "Принудительно обновлять каждые"
-
-msgid "Force-time unit"
-msgstr "Единица измерения обновления"
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid "Network"
-msgstr "Сеть"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-"При включении какого интерфейса должен запускаться процесс скрипта DDNS."
-
-msgid "Password"
-msgstr "Пароль"
-
-msgid "Service"
-msgstr "Сервис"
-
-msgid "Source of IP address"
-msgstr "Источник IP-адреса"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Имя пользователя"
-
-msgid "custom"
-msgstr "пользовательский"
-
-# Hours
-msgid "h"
-msgstr "ч"
-
-msgid "interface"
-msgstr "интерфейс"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "мин"
-
-msgid "network"
-msgstr "сеть"
diff --git a/po/ru/diag_core.po b/po/ru/diag_core.po
deleted file mode 100644
index 1abaa8c..0000000
--- a/po/ru/diag_core.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: diag_core\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 11:44+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Configure Diagnostics"
-msgstr "Настройки диагностики"
-
-msgid "Diagnostics"
-msgstr "Диагностика"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Доступные в данном меню виды диагностики зависят от установленных на вашем "
-"устройстве модулей. "
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Записи в меню позволять вам выполнить диагностику системы, чтобы помочь в "
-"обнаружении проблем."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Используя это меню, вы можете настроить диагностику сети, например, "
-"сканирование сетевых устройств или ping-тест."
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d_diag"
diff --git a/po/ru/diag_devinfo.po b/po/ru/diag_devinfo.po
deleted file mode 100644
index 13d85e8..0000000
--- a/po/ru/diag_devinfo.po
+++ /dev/null
@@ -1,224 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: diag_devinfo\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 18:27+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Actions"
-msgstr "Действия"
-
-msgid "Add"
-msgstr "Добавить"
-
-msgid "Beginning of MAC address range"
-msgstr "Начало диапазона MAC-адресов"
-
-msgid "Config Phone Scan"
-msgstr "Настроить сканирование телефонов"
-
-msgid "Configure"
-msgstr "Настроить"
-
-msgid "Configure Scans"
-msgstr "Настроить сканирование"
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-"Настроить сканирование устройств в указанных сетях. Уменьшение таймаута, "
-"количества повторов и/или паузы между запросами может ускорить сканирование, "
-"но также вызвать проблемы поиска некоторых устройств."
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-"Настроить сканирование поддерживаемых SIP-устройств в указанных сетях. "
-"Уменьшение таймаута, количества повторов и/или паузы между запросами может "
-"ускорить сканирование, но также вызвать проблемы поиска некоторых устройств."
-
-msgid "Delete"
-msgstr "Удалить"
-
-msgid "Device Scan Config"
-msgstr "Конфигурация сканирования устройства"
-
-msgid "Device Type"
-msgstr "Тип устройства"
-
-msgid "Devices discovered for"
-msgstr "Устройства, найденные в"
-
-msgid "Devices on Network"
-msgstr "Устройства в сети"
-
-msgid "Edit"
-msgstr "Редактировать"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "End of MAC address range"
-msgstr "Конец диапазона MAC адресов"
-
-msgid "Go to relevant configuration page"
-msgstr "Перейти на соответствующую страницу конфигурации"
-
-msgid "IP Address"
-msgstr "IP-адрес"
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid "Invalid"
-msgstr "Неверный"
-
-msgid "Link to Device"
-msgstr "Соединение с устройством"
-
-msgid "MAC Address"
-msgstr "MAC-адрес"
-
-#, fuzzy
-msgid "MAC Device Info Overrides"
-msgstr "Переопределение информации о MAC-устройстве"
-
-#, fuzzy
-msgid "MAC Device Override"
-msgstr "Переопределение MAC-устройства"
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-"Диапазон MAC-адресов и информация для переопределения системной базы данных "
-"и базы данных IEEE"
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr "Время бездействия между запросами (мс, 100 по умолчанию)"
-
-msgid "Model"
-msgstr "Модель"
-
-msgid "Name"
-msgstr "Имя"
-
-msgid "Network Device Scan"
-msgstr "Сканирование сетевых устройств"
-
-msgid "Network Device Scanning Configuration"
-msgstr "Конфигурация сканирования сетевых устройств"
-
-msgid "Networks to scan for devices"
-msgstr "Сети, в которых производить сканирование устройств"
-
-msgid "Networks to scan for supported devices"
-msgstr "Сети, в которых производить сканирование поддерживаемых устройств"
-
-msgid "No SIP devices"
-msgstr "SIP-устройства отсутствуют"
-
-msgid "No devices detected"
-msgstr "Устройства не обнаружены"
-
-msgid "Number of times to send requests (default 1)"
-msgstr "Количество запросов (1 по умолчанию)"
-
-msgid "OUI Owner"
-msgstr "Владелец OUI"
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-"Переопределить значения, полученные из скрипта \"MAC to Device\" (mac-to-"
-"devinfo), для заданного диапазона MAC-адресов"
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr "Произвести сканирование (это может занять несколько минут)"
-
-msgid "Phone Information"
-msgstr "Информация о телефоне"
-
-msgid "Phone Scan"
-msgstr "Сканировать телефоны"
-
-msgid "Phone Scanning Configuration"
-msgstr "Конфигурация сканирования телефонов"
-
-msgid "Phones"
-msgstr "Телефоны"
-
-msgid "Ports"
-msgstr "Порты"
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr "Количество повторов"
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr "Повторить сканирование (это может занять несколько минут)"
-
-msgid "SIP Device Information"
-msgstr "Информация о SIP-устройстве"
-
-msgid "SIP Device Scan"
-msgstr "Сканировать SIP-устройства"
-
-msgid "SIP Device Scanning Configuration"
-msgstr "Конфигурация сканирования SIP-устройств"
-
-msgid "SIP Devices on Network"
-msgstr "SIP-устройства в сети"
-
-msgid "SIP devices discovered for"
-msgstr "SIP-устройства, найденные в"
-
-msgid "Scan for devices on specified networks."
-msgstr "Сканировать устройства в заданных сетях."
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr "Сканировать поддерживаемые SIP-устройства в заданных сетях."
-
-msgid "Scanning Configuration"
-msgstr "Конфигурация сканирования"
-
-msgid "Scans for devices on specified networks."
-msgstr "Сканирует устройства в заданных сетях."
-
-msgid "Sleep Between Requests"
-msgstr "Пауза между запросами"
-
-msgid "Subnet"
-msgstr "Подсеть"
-
-msgid "This section contains no values yet"
-msgstr "Эта секция пока не содержит значений."
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr "Время ожидания ответов (сек, 10 по умолчанию)"
-
-msgid "Timeout"
-msgstr "Таймаут"
-
-msgid "Use Configuration"
-msgstr "Использовать конфигурацию"
-
-msgid "Vendor"
-msgstr "Производитель"
-
-msgid "check other networks"
-msgstr "проверить другие сети"
diff --git a/po/ru/ffwizard.po b/po/ru/ffwizard.po
deleted file mode 100644
index afc10b9..0000000
--- a/po/ru/ffwizard.po
+++ /dev/null
@@ -1,183 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: ffwizard\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 17:17+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr "Разрешить передачу анонимной статистики с этого узла"
-
-msgid "Channel"
-msgstr "Канал"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Выберите это для зашиты вашей локальной сети от других узлов и клиентов"
-
-msgid "Configure network"
-msgstr "Конфигурировать сеть"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr "Соединять ваш узел с другими узлами туннелем через интернет."
-
-msgid "DHCP IP range"
-msgstr "Диапазон IP-адресов DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP автоматически назначит IP-адреса клиентам"
-
-msgid "DNS Server"
-msgstr "Сервер DNS"
-
-msgid "Enable DHCP"
-msgstr "Разрешить DHCP"
-
-msgid "Gateway"
-msgstr "Шлюз"
-
-msgid "Heartbeat"
-msgstr "Состояние"
-
-msgid "IP address"
-msgstr "IP-адрес"
-
-msgid "L2gvpn tunnel"
-msgstr "L2gvpn туннель"
-
-msgid "Limit download bandwidth"
-msgstr "Ограничить пропускную способность загрузки"
-
-msgid "Limit upload bandwidth"
-msgstr "Ограничить пропускную способность передачи"
-
-msgid "Mesh IP address"
-msgstr "IP-адрес ячейки"
-
-msgid "Mesh IPv6 Address"
-msgstr "IPv6-адрес ячейки"
-
-msgid "Netmask"
-msgstr "Маска сети"
-
-msgid "Password"
-msgstr "Пароль"
-
-msgid "Password confirmation"
-msgstr "Подтверждение пароля"
-
-msgid "Password successfully changed"
-msgstr "Пароль успешно изменён"
-
-msgid "Protect LAN"
-msgstr "Защитить LAN"
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr "Настроить сетевые интерфейсы"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Разрешить другим пользователям использовать ваше соединение для доступа в "
-"интернет."
-
-msgid "Share your internet connection"
-msgstr "Разрешить другим использовать ваше интернет-соединение"
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Диапазон IP-адресов клиентов (например, 10.1.2.1/28). Если данный диапазон "
-"находится внутри диапазона вашей ячеистой сети, то он будет анонсирован как "
-"HNA. Любой другой диапазон будет использовать NAT. Если значение не задано, "
-"то будут использоваться настройки из профиля сообщества."
-
-# TYPO: auomatically -> automatically
-# ipv6 -> IPv6
-msgid "The ipv6 address is calculated auomatically."
-msgstr "IPv6-адрес рассчитывается автоматически."
-
-msgid "The protocol to use for internet connectivity."
-msgstr "Протокол доступа в интернет."
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Уникальный адрес в ячейке (например, 10.1.1.1). Адрес должен быть "
-"зарегистрирован в вашем местном сообществе."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Установка нового виртуального беспроводного интерфейса в режим \"Точка "
-"доступа\"."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Этот помощник поможет вам в настройке маршрутизатора для Freifunk-сети или "
-"другой аналогичной беспроводного сети."
-
-msgid "Unknown Error"
-msgstr "Неизвестная ошибка"
-
-msgid "Username"
-msgstr "Имя пользователя"
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Виртуальная точка доступа (VAP)"
-
-msgid "Wizard"
-msgstr "Помощник"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-"Ваше устройство и соседние узлы должны использовать один и тот же канал."
-
-msgid "dhcp"
-msgstr "DHCP"
-
-msgid "kbit/s"
-msgstr "кбит/с"
-
-msgid "static"
-msgstr "статический"
-
-msgid "Configure this interface."
-msgstr "Настроить интерфейс."
-
-msgid "recommended"
-msgstr "рекомендуемый"
-
-msgid "Basic settings"
-msgstr "Главные настройки"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Ошибка в главных настройках. Пожалуйста, перейдите в"
-
-msgid "Error"
-msgstr "Ошибка"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-"Вы не можете использовать помощника, так как некоторые необходимые значения "
-"отсутствуют."
-
-msgid "and fill out all required fields."
-msgstr "и заполните все требуемые поля."
diff --git a/po/ru/firewall.po b/po/ru/firewall.po
deleted file mode 100644
index d20cff1..0000000
--- a/po/ru/firewall.po
+++ /dev/null
@@ -1,676 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: firewall\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-10-18 11:50+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "%s in %s"
-msgstr "%s в %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s с %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s в %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(Запись без имени)"
-
-msgid "(Unnamed Rule)"
-msgstr "(Правило без имени)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(SNAT без имени)"
-
-msgid "-- Please choose --"
-msgstr "-- Пожалуйста, выберите --"
-
-msgid "-- custom --"
-msgstr "-- пользовательский --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> пакетов за <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr "<var>%d</var> пакетов за <var>%s</var>, подряд <var>%d</var> пакетов"
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> с пределом в %s"
-
-msgid "Action"
-msgstr "Действие"
-
-msgid "Add"
-msgstr "Добавить"
-
-msgid "Add and edit..."
-msgstr "Добавить и редактировать..."
-
-msgid "Advanced Settings"
-msgstr "Расширенные настройки"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Разрешить перенаправление из <em>зон-источников</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Разрешить перенаправление в <em>зоны назначения</em>:"
-
-msgid "Any"
-msgstr "Любой"
-
-msgid "Covered networks"
-msgstr "Использовать сети"
-
-msgid "Custom Rules"
-msgstr "Пользовательские правила"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Пользовательские правила позволяют выполнять произвольные команды iptables, "
-"которые так или иначе не покрываются данным фреймворком межсетевого экрана. "
-"Команды выполняются при каждом перезапуске межсетевого экрана, сразу после "
-"того, как загружен набор правил по умолчанию."
-
-msgid "Destination IP address"
-msgstr "IP-адрес назначения"
-
-msgid "Destination address"
-msgstr "Адрес назначения"
-
-msgid "Destination port"
-msgstr "Порт назначения"
-
-msgid "Destination zone"
-msgstr "Зона назначения"
-
-msgid "Do not rewrite"
-msgstr "Не перезаписывать"
-
-msgid "Drop invalid packets"
-msgstr "Не пропускать некорректные пакеты"
-
-msgid "Enable"
-msgstr "Включить"
-
-#, fuzzy
-msgid "Enable NAT Loopback"
-msgstr "Включить NAT Loopback"
-
-msgid "Enable SYN-flood protection"
-msgstr "Включить защиту от SYN-flood атак"
-
-msgid "Enable logging on this zone"
-msgstr "Включить журналирование в этой зоне"
-
-msgid "External IP address"
-msgstr "Внешний IP-адрес"
-
-msgid "External port"
-msgstr "Внешний порт"
-
-msgid "External zone"
-msgstr "Внешняя зона"
-
-msgid "Extra arguments"
-msgstr "Дополнительные аргументы"
-
-msgid "Firewall"
-msgstr "Межсетевой экран"
-
-msgid "Firewall - Custom Rules"
-msgstr "Межсетевой экран - Пользовательские правила"
-
-msgid "Firewall - Port Forwards"
-msgstr "Межсетевой экран - Перенаправление портов"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Межсетевой экран - Правила для трафика"
-
-msgid "Firewall - Zone Settings"
-msgstr "Межсетевой экран - Настройка зон"
-
-msgid "Force connection tracking"
-msgstr "Включить отслеживание соединений"
-
-msgid "Forward"
-msgstr "Перенаправление"
-
-msgid "Forward to"
-msgstr "Перенаправлять в"
-
-msgid "From %s in %s"
-msgstr "Из %s в %s"
-
-msgid "From %s in %s with source %s"
-msgstr "Из %s в %s с источником %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "Из %s в %s с источниками %s и %s"
-
-msgid "General Settings"
-msgstr "Общие настройки"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 и IPv6"
-
-msgid "IPv4 only"
-msgstr "Только IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "Только IPv6"
-
-msgid "Input"
-msgstr "Входящий"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Перенаправление между зонами"
-
-msgid "Internal IP address"
-msgstr "Внутренний IP-адрес"
-
-msgid "Internal port"
-msgstr "Внутренний порт"
-
-msgid "Internal zone"
-msgstr "Внутренняя зона"
-
-msgid "Limit log messages"
-msgstr "Ограничить журнал сообщений"
-
-msgid "MSS clamping"
-msgstr "Ограничение MSS"
-
-msgid "Masquerading"
-msgstr "Маскарадинг"
-
-#, fuzzy
-msgid "Match"
-msgstr "Выбирать"
-
-#, fuzzy
-msgid "Match ICMP type"
-msgstr "Выбирать ICMP типа"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-"Перенаправить соответствующий трафик на определённый порт или диапазон "
-"портов. "
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Выбирать входящий трафик, направленный на порт или диапазон портов данного "
-"хоста"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Выбирать входящий трафик, исходящий из порта или диапазона портов "
-"клиентского хоста."
-
-msgid "Name"
-msgstr "Имя"
-
-msgid "New SNAT rule"
-msgstr "Новое правило SNAT"
-
-msgid "New forward rule"
-msgstr "Новое правило перенаправления"
-
-msgid "New input rule"
-msgstr "Новое правило для входящего трафика"
-
-msgid "New port forward"
-msgstr "Новое перенаправление порта"
-
-msgid "New source NAT"
-msgstr "Новый SNAT"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "Выбирать только входящий трафик, направленный на указанный IP-адрес."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Выбирать только входящий трафик от этих MAC-адресов."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-"Выбирать только входящий трафик от этого IP-адреса или диапазона адресов."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Выбирать только входящий трафик, исходящий из указанного порта или диапазона "
-"портов клиентского хоста"
-
-msgid "Open ports on router"
-msgstr "Открыть порты на маршрутизаторе"
-
-msgid "Other..."
-msgstr "Другое..."
-
-msgid "Output"
-msgstr "Исходящий"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-"Передаёт дополнительные аргументы iptables. Используйте с осторожностью!"
-
-msgid "Port Forwards"
-msgstr "Перенаправления портов"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"Перенаправленные портов позволяет удалённым компьютерам из Интернета "
-"соединяться с компьютером или службой внутри частной локальной сети."
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr "Перенаправить входящий трафик на указанный порт хоста внутренней сети"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Перенаправить входящий трафик на указанный хост внутренней сети"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Использовать маскарадинг только для указанных подсетей-получателей"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Использовать маскарадинг только для указанных подсетей-отправителей"
-
-msgid "Restrict to address family"
-msgstr "Использовать только семейство протоколов"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "Перенаправлять соответствующий трафик к указанному адресу."
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Перенаправлять соответствующий трафик к указанному порту источника. Может "
-"быть пустым в случае, если необходимо перенаправить только IP-адрес."
-
-msgid "Rewrite to source %s"
-msgstr "Перенаправлять к источнику %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "Перенаправлять к источнику %s, %s"
-
-msgid "SNAT IP address"
-msgstr "IP-адрес SNAT"
-
-msgid "SNAT port"
-msgstr "Порт SNAT"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# msgid "Traffic Redirection"
-# msgstr ""
-# msgid ""
-# "Traffic redirection allows you to change the destination address of "
-# "forwarded packets."
-# msgstr ""
-# msgid "Overview"
-# msgstr ""
-# msgid "Name"
-# msgstr ""
-# msgid "Source zone"
-# msgstr ""
-# msgid "Source MAC-address"
-# msgstr ""
-# msgid "Source port"
-# msgstr ""
-# msgid "Protocol"
-# msgstr ""
-msgid "Source IP address"
-msgstr "IP-адрес источника"
-
-msgid "Source MAC address"
-msgstr "MAC-адрес источника"
-
-msgid "Source NAT"
-msgstr "SNAT"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"SNAT - это особая форма маскарадинга (masquerading), позволяющая "
-"осуществлять детальный контроль над IP-адресом источника для исходящего "
-"трафика, например, перенаправление нескольких WAN-адресов во внутреннюю "
-"подсеть."
-
-msgid "Source address"
-msgstr "Адрес источника"
-
-msgid "Source port"
-msgstr "Порт источника"
-
-msgid "Source zone"
-msgstr "Зона-источник"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr "Межсетевой экран создает зоны в вашей сети для контроля трафика."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"Данные настройки управляют перенаправлением между этой (%s) и другими "
-"зонами. Трафиком <em>зон-получателей</em> является трафик <strong>исходящий "
-"из %q</strong>. Трафиком <em>зон-источников</em> является трафик "
-"<strong>направленый в %q</strong>. Перенаправление является "
-"<em>однонаправленным</em>, то есть перанаправление из lan в wan <em>не</em> "
-"допускает перенаправление трафика из wan в lan."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"На этой странице можно изменить расширенные настройки перенаправления "
-"портов. В большинстве случаев нет необходимости изменять эти параметры."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"На этой странице можно изменить расширенные настройки правил для трафика. В "
-"большинстве случаев нет необходимости изменять эти параметры."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Данная секция позволяет изменять общие настройки %q. Опции <em>входящий</em> "
-"и <em>исходящий</em> устанавливают политику по умолчанию для входящего и "
-"исходящего трафика. Опция <em>перенаправление</em> позволяет установить "
-"политику для трафика, который перенаправляется через несколько сетей в зоне. "
-"Пункт <em>использовать сети</em> позволяет указать, какие сети являются "
-"частью данной зоны."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "К %s, порту %s на <var>этом устройстве</var>"
-
-msgid "To %s in %s"
-msgstr "К %s в %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "К %s на <var>этом устройстве</var>"
-
-msgid "To %s, %s in %s"
-msgstr "К %s, %s в %s"
-
-msgid "To source IP"
-msgstr "К IP-адресу источника"
-
-msgid "To source port"
-msgstr "К порту источника"
-
-msgid "Traffic Rules"
-msgstr "Правила для трафика"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"Правила для трафика определяют политику прохождения пакетов между разными "
-"зонами, например, запрет трафика между некоторыми хостами или открытие WAN-"
-"портов маршрутизатора."
-
-msgid "Via %s"
-msgstr "Через %s"
-
-msgid "Via %s at %s"
-msgstr "Через %s, порт %s"
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Вы можете указать несколько, выбрав \"-- пользовательский --\" и перечислив "
-"через пробел названия протоколов."
-
-msgid "Zone %q"
-msgstr "Зона %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Зона ⇒ Перенаправления"
-
-msgid "Zones"
-msgstr "Зоны"
-
-msgid "accept"
-msgstr "принимать"
-
-msgid "any"
-msgstr "любой"
-
-msgid "any host"
-msgstr "любого хоста"
-
-msgid "any router IP"
-msgstr "любой IP-адрес маршрутизатора"
-
-msgid "any zone"
-msgstr "любой зоны"
-
-msgid "don't track"
-msgstr "не отслеживать"
-
-msgid "drop"
-msgstr "не обрабатывать"
-
-msgid "reject"
-msgstr "отвергать"
-
-#~ msgid "Destination"
-#~ msgstr "Назначение"
-
-#~ msgid "Family"
-#~ msgstr "Семейство"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Источник"
-
-#~ msgid "To %s"
-#~ msgstr "к %s"
-
-#~ msgid "To %s at %s"
-#~ msgstr "к %s на %s"
-
-#~ msgid "Via"
-#~ msgstr "Через"
-
-#~ msgid "Accept forward"
-#~ msgstr "Принимать перенаправление"
-
-#~ msgid "Accept input"
-#~ msgstr "Принимать входящие"
-
-#~ msgid "Disable"
-#~ msgstr "Отключить"
-
-#~ msgid "Discard forward"
-#~ msgstr "Отвергать перенаправление"
-
-#~ msgid "Discard input"
-#~ msgstr "Выбрасывать входящие пакеты"
-
-#~ msgid "Do not track forward"
-#~ msgstr "Не отслеживать перенаправление"
-
-#~ msgid "Do not track input"
-#~ msgstr "Не отслеживать входные пакеты"
-
-#~ msgid "IP"
-#~ msgstr "IP-адрес"
-
-#~ msgid "IP range"
-#~ msgstr "Диапазон IP-адресов"
-
-#~ msgid "IPs"
-#~ msgstr "IP-адреса"
-
-#~ msgid "MAC"
-#~ msgstr "MAC-адрес"
-
-#~ msgid "MACs"
-#~ msgstr "MAC-адреса"
-
-#~ msgid "Refuse forward"
-#~ msgstr "Отвергать перенаправление"
-
-#~ msgid "Refuse input"
-#~ msgstr "Отвергать входящий трафик"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "Правило выключено"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "Правило включено"
-
-#~ msgid "day"
-#~ msgstr "день"
-
-#~ msgid "hour"
-#~ msgstr "час"
-
-#~ msgid "minute"
-#~ msgstr "мин"
-
-#~ msgid "not"
-#~ msgstr "не"
-
-#~ msgid "port"
-#~ msgstr "порт"
-
-#~ msgid "ports"
-#~ msgstr "порты"
-
-#~ msgid "second"
-#~ msgstr "сек"
-
-#~ msgid "type"
-#~ msgstr "тип"
-
-#~ msgid "types"
-#~ msgstr "типы"
-
-#~ msgid "(optional)"
-#~ msgstr "(необязательно)"
-
-#~ msgid "Intended destination address"
-#~ msgstr "Адрес назначения"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Внутренний порт (необязательно)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Расширенные опции"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Расширенные правила"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Расширенные правила позволяют настроить сетевой экран в соответствии с "
-#~ "вашими потребностями. Только новые соединения будут обработаны. Пакеты, "
-#~ "принадлежащие уже существующим соединениям, будут автоматически пропущены "
-#~ "через сетевой экран."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Пользовательские правила (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Устройство"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "Для DNAT соответствующий трафик перенаправляется на введенный адрес "
-#~ "назначения. Для SNAT подменяется адрес источника на введенный."
-
-#~ msgid ""
-#~ "Match incoming traffic originating from the given source port or port "
-#~ "range on the client host"
-#~ msgstr ""
-#~ "Выбирать исходящий трафик отправленный с порта или диапазона портов "
-#~ "внешнего хоста"
-
-#~ msgid "Overview"
-#~ msgstr "Назад к обзору"
-
-#~ msgid "Port forwarding"
-#~ msgstr "Перенаправление портов"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "Перенаправление портов позволяет открыть доступ к внутренним службам из "
-#~ "внешней сети."
-
-#~ msgid "Redirection type"
-#~ msgstr "Тип перенаправления"
-
-#~ msgid "Redirections"
-#~ msgstr "Перенаправления"
-
-#~ msgid "Rules"
-#~ msgstr "Правила"
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Перенаправление трафика"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "Перенаправление трафика позволяет изменить адрес получателя для "
-#~ "проходящих пакетов."
diff --git a/po/ru/freifunk-policyrouting.po b/po/ru/freifunk-policyrouting.po
deleted file mode 100644
index a4ba704..0000000
--- a/po/ru/freifunk-policyrouting.po
+++ /dev/null
@@ -1,70 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: freifunk-policyrouting\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-07-25 12:26+0200\n"
-"PO-Revision-Date: 2012-08-15 15:27+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-"Весь трафик от интерфейсов, принадлежащих этим зонам, будет послан через "
-"шлюз в ячеистой сети."
-
-msgid "Enable Policy Routing"
-msgstr "Разрешить политику маршрутизации"
-
-#, fuzzy
-msgid "Fallback to mesh"
-msgstr "Откат к ячеистой сети"
-
-msgid "Firewall zones"
-msgstr "Зоны межсетевого экрана"
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-"Трафик, принадлежащий выбранным зонам межсетевого экрана, маршрутизируется "
-"через ваше интернет-соединение, если маршрут по умолчанию не был получен из "
-"ячеистой сети. Если вас это не устраивает, то выберите эту опцию и данный "
-"трафик будет заблокирован."
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-"Если ваш шлюз не доступен, откатиться к использованию шлюза ячеистой сети по "
-"умолчанию."
-
-msgid "Policy Routing"
-msgstr "Политика маршрутизации"
-
-msgid "Strict Filtering"
-msgstr "Строгая фильтрация"
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
-"На этих страницах Вы можете настроить политику маршрутизации для "
-"определённых зон межсетевого экрана. Это может быть полезно, если вы хотите "
-"использовать интернет-соединения только для себя. Ваш трафик в этом случае "
-"будет использовать только ваше интернет-соединение, в то время как трафик "
-"ячеистой сети будет использовать другой шлюз."
diff --git a/po/ru/freifunk.po b/po/ru/freifunk.po
deleted file mode 100644
index c0dd5ab..0000000
--- a/po/ru/freifunk.po
+++ /dev/null
@@ -1,440 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: freifunk\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 20:46+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr "Базовые настройки"
-
-msgid "Basic settings"
-msgstr "Базовые настройки"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "Базовые настройки не верны. Пожалуйста, перейдите в"
-
-msgid "Basic system settings"
-msgstr "Основные настройки системы"
-
-msgid "Bitrate"
-msgstr "Скорость"
-
-msgid "Channel"
-msgstr "Канал"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-"Проверить наличие новой версии прошивки и выполнить автоматическое "
-"обновление."
-
-msgid "Client network size"
-msgstr "Размер клиентской сети"
-
-msgid "Community"
-msgstr "Сообщество"
-
-msgid "Community profile"
-msgstr "Профиль сообщества"
-
-msgid "Community settings"
-msgstr "Настройки сообщества"
-
-msgid "Confirm Upgrade"
-msgstr "Подтвердить обновление"
-
-msgid "Contact"
-msgstr "Контактная информация"
-
-msgid "Contact information is incomplete. Please go to"
-msgstr "Контактная информация не верна. Пожалуйста, перейдите в"
-
-msgid "Coordinates"
-msgstr "Координаты"
-
-msgid "Country code"
-msgstr "Код страны"
-
-msgid "Default routes"
-msgstr "Маршруты по умолчанию"
-
-msgid "Disable default content"
-msgstr "Запретить контент по умолчанию"
-
-msgid "Diversity is enabled for device"
-msgstr "Неопределенность пути включена"
-
-msgid "E-Mail"
-msgstr "Эл. почта"
-
-msgid "ESSID"
-msgstr "ESSID"
-
-msgid "Edit index page"
-msgstr "Редактировать главную страницу"
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr "Ошибка"
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr "Найдите свои координаты с помощью OpenStreetMap"
-
-msgid "Freifunk"
-msgstr "Freifunk"
-
-msgid "Freifunk Overview"
-msgstr "Обзор Freifunk"
-
-msgid "Freifunk Remote Update"
-msgstr "Удалённое обновление Freifunk"
-
-msgid "Gateway"
-msgstr "Шлюз"
-
-msgid "Go to"
-msgstr "Перейти"
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Здравствуйте и добро пожаловать в сеть"
-
-msgid "Hide OpenStreetMap"
-msgstr "Скрыть OpenStreetMap"
-
-msgid "Homepage"
-msgstr "Домашняя страница"
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr "Если выбрано, содержимое по умолчанию не будет показано."
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Если вы заинтересованы в нашем проекте, свяжитесь с местным сообществом"
-
-msgid "Index Page"
-msgstr "Главная страница"
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"Доступ в интернет зависит от технических и организационных условий и может "
-"быть не доступен для вас."
-
-# It - access point
-msgid "It is operated by"
-msgstr "Она управляется"
-
-msgid "Keep configuration"
-msgstr "Сохранить конфигурацию"
-
-msgid "Latitude"
-msgstr "Широта"
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr "Загрузка"
-
-msgid "Local Time"
-msgstr "Местное время"
-
-msgid "Location"
-msgstr "Местоположение"
-
-msgid "Longitude"
-msgstr "Долгота"
-
-msgid "Map"
-msgstr "Карта"
-
-msgid "Map Error"
-msgstr "Ошибка карты"
-
-msgid "Memory"
-msgstr "Память"
-
-msgid "Mesh prefix"
-msgstr "Префикс ячейки"
-
-msgid "Metric"
-msgstr "Метрика"
-
-msgid "Mode"
-msgstr "Режим"
-
-msgid "Network"
-msgstr "Сеть"
-
-msgid "Network for client DHCP addresses"
-msgstr "Сеть для клиентских DHCP-адресов"
-
-msgid "Nickname"
-msgstr "Псевдоним"
-
-msgid "No default routes known."
-msgstr "Маршруты по умолчанию не известны."
-
-msgid "Notice"
-msgstr "Внимание"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "Operator"
-msgstr "Оператор"
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr "Обзор"
-
-msgid "Package libiwinfo required!"
-msgstr "Требуется libiwinfo!"
-
-msgid "Phone"
-msgstr "Телефон"
-
-msgid "Please fill in your contact details below."
-msgstr "Пожалуйста, введите вашу контактную информацию."
-
-msgid "Please set your contact information"
-msgstr "Пожалуйста, введите вашу контактную информацию"
-
-msgid "Power"
-msgstr "Питание"
-
-msgid "Processor"
-msgstr "Процессор"
-
-msgid "Profile"
-msgstr "Профиль"
-
-msgid "Profile (Expert)"
-msgstr "Профиль (эксперт)"
-
-msgid "Realname"
-msgstr "Имя"
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-"Укажите ваше местоположение на карте с помощью щелчка мыши. Карта будет "
-"показана только если вы подключены к интернету."
-
-msgid "Show OpenStreetMap"
-msgstr "Показать карту OpenStreetMap"
-
-msgid "Show on map"
-msgstr "Показать на карте"
-
-msgid "Signal"
-msgstr "Сигнал"
-
-msgid "Splash"
-msgstr "Splash-экран"
-
-msgid "Start Upgrade"
-msgstr "Начать обновление"
-
-msgid "Statistics"
-msgstr "Статистика"
-
-msgid "Status"
-msgstr "Статус"
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr "Система"
-
-msgid "TX"
-msgstr "TX"
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Пакет <em>libiwinfo-lua</em> не установлен. Для включения настроек "
-"беспроводных сетей, вам необходимо установить этот компонент!"
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-"Сервис OLSRd не сконфигурирован на получение данных о местоположении из сети."
-"<br /> Пожалуйста, удостоверьтесь, что модуль пространства имён настроен "
-"правильно и что опция <em>latlon_file</em> включена."
-
-msgid "The installed firmware is the most recent version."
-msgstr "Установлена прошивка самой последней версии."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-"Это базовые настройки вашего сообщества. Они определяют стандартные "
-"настройки для мастера установки и НЕ влияют на конечную конфигурацию "
-"маршрутизатора."
-
-msgid "These are the settings of your local community."
-msgstr "Это настройки для вашего сообщества."
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-"Эти страницы помогут настроить ваш маршрутизатор для Freifunk или подобной "
-"беспроводной сети."
-
-msgid "This is the access point"
-msgstr "Это - точка доступа"
-
-msgid "Update Settings"
-msgstr "Настройки обновления"
-
-msgid "Update available!"
-msgstr "Доступно обновление!"
-
-msgid "Uptime"
-msgstr "Время работы"
-
-msgid "Verify downloaded images"
-msgstr "Проверять загруженные образы"
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-"Мы - это сообщество, цель которого создать бесплатную, независимую и "
-"открытую беспроводную ячеистую сеть."
-
-msgid "Wireless Overview"
-msgstr "Обзор беспроводных сетей"
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-"У вас есть возможность установить дополнительное содержимое публичной "
-"страницы, вставив соответствующий XHTML-код в форму.<br /> Заголовки должны "
-"быть заключены между &lt;h2&gt; и &lt;/h2&gt;."
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr "Вы можете найти дополнительную информацию о Freifunk по адресу"
-
-msgid "You can manually edit the selected community profile here."
-msgstr "Здесь вы можете редактировать выбранный профиль сообщества."
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-"Необходимо выбрать профиль перед его редактированием. Чтобы выбрать профиль, "
-"перейдите в"
-
-msgid "and fill out all required fields."
-msgstr "и заполните все необходимые поля."
-
-msgid "buffered"
-msgstr "буферизировано"
-
-msgid "cached"
-msgstr "кэшировано"
-
-msgid "e.g."
-msgstr "напр."
-
-msgid "free"
-msgstr "свободно"
-
-msgid "to disable it."
-msgstr "чтобы выключить."
-
-msgid "used"
-msgstr "использовано"
-
-msgid "wireless settings"
-msgstr "настройки беспроводной сети"
-
-#~ msgid ""
-#~ "No services can be shown, because olsrd is not running or the olsrd-"
-#~ "nameservice Plugin is not loaded."
-#~ msgstr ""
-#~ "Сервис не может быть показан, так как oslrd не запущен или модуль olsrd-"
-#~ "nameservice не загружен."
-
-#~ msgid "Services"
-#~ msgstr "Службы"
-
-#~ msgid "Source"
-#~ msgstr "Источник"
-
-#~ msgid ""
-#~ "The <em>libiwinfo-lua</em> package is not installed. You must install "
-#~ "this component for working wireless configuration!"
-#~ msgstr ""
-#~ "Пакет <em>libiwinfo-lua</em> не установлен. Вам необходимо установить "
-#~ "этот компонент для настройки беспроводной сети!"
-
-#~ msgid "Url"
-#~ msgstr "Url"
diff --git a/po/ru/hd_idle.po b/po/ru/hd_idle.po
deleted file mode 100644
index 51f1f6c..0000000
--- a/po/ru/hd_idle.po
+++ /dev/null
@@ -1,52 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: hd_idle\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-08-15 11:24+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Disk"
-msgstr "Диск"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "Enable debug"
-msgstr "Включить отладку"
-
-msgid "Idle-time"
-msgstr "Время бездействия"
-
-msgid "Idle-time unit"
-msgstr "Единицы времени бездействия"
-
-msgid "Settings"
-msgstr "Настройки"
-
-# Hours
-msgid "h"
-msgstr "ч"
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"Утилита hd-idle позволяет замедлять внешние диски после определённого "
-"времени бездействия."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "мин"
diff --git a/po/ru/meshwizard.po b/po/ru/meshwizard.po
deleted file mode 100644
index 8b08065..0000000
--- a/po/ru/meshwizard.po
+++ /dev/null
@@ -1,144 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: meshwizard\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-07-20 09:47+0200\n"
-"PO-Revision-Date: 2012-08-15 15:42+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "Канал"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-"Включите эту опцию, чтобы защитить локальную сеть от других узлов или "
-"клиентов"
-
-msgid "Cleanup config"
-msgstr "Очистить конфигурацию"
-
-msgid "Configure this interface"
-msgstr "Настроить этот интерфейс"
-
-msgid "DHCP IP range"
-msgstr "Диапазон IP-адресов DHCP"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP автоматически назначит IP-адреса клиентам"
-
-msgid "Enable DHCP"
-msgstr "Включить DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr "Общие настройки"
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-"Если эта опция включена, то конфигурация очищается перед установкой новых "
-"настроек."
-
-msgid "Interfaces"
-msgstr "Интерфейсы"
-
-msgid "Mesh IP address"
-msgstr "IP-адрес ячейки"
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr "Мастер настройки ячеистой сети"
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr "Защитить LAN"
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-"Включите эту опцию, чтобы позволить другим клиентам использовать ваше "
-"подключение к интернету."
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr "Сделать интернет-подключение общедоступным"
-
-# HNA - Home Network Announcement
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-"Диапазон IP-адресов для использования клиентами сети (например 10.1.2.1/28). "
-"Если указанный диапазон находится внутри вашей сети, тогда он будет объявлен "
-"как HNA. Любой другой диапазон будет использовать NAT. В случае пустого "
-"значение будут использоваться стандартные настройки."
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr "Заданный IP-адрес не находится внутри ячеистой сети"
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-"Это уникальный адрес в ячеистой сети (например 10.1.1.1), который должен "
-"быть зарегистрирован в вашем местном сообществе."
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-"Будет произведена настройка новой виртуальной беспроводной сети в режиме "
-"точки доступа."
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-"Данный мастер поможет настроить ваш маршрутизатор для сети Freifunk или "
-"другой подобной беспроводной сети."
-
-msgid "Virtual Access Point (VAP)"
-msgstr "Виртуальная точка доступа (VAP)"
-
-msgid "Wizard"
-msgstr "Мастер установки"
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-"Ваше устройство и соседние узлы должны использовать один и тот же канал."
-
-msgid "recommended"
-msgstr "рекомендуется"
diff --git a/po/ru/minidlna.po b/po/ru/minidlna.po
deleted file mode 100644
index 62ffaca..0000000
--- a/po/ru/minidlna.po
+++ /dev/null
@@ -1,190 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: minidlna\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Advanced Settings"
-msgstr "Расширенные настройки"
-
-msgid "Album art names:"
-msgstr "Имена обложек альбома:"
-
-msgid "Announced model number:"
-msgstr "Номер модели:"
-
-msgid "Announced serial number:"
-msgstr "Серийный номер:"
-
-msgid "Browse directory"
-msgstr "Обзор директории"
-
-msgid "Collecting data..."
-msgstr "Сбор данных..."
-
-msgid "Database directory:"
-msgstr "Папка базы данных:"
-
-msgid "Enable TIVO:"
-msgstr "Включить TIVO:"
-
-msgid "Enable inotify:"
-msgstr "Включить inotify:"
-
-msgid "Enable:"
-msgstr "Включить:"
-
-msgid "Friendly name:"
-msgstr "Понятное имя:"
-
-msgid "General Settings"
-msgstr "Общие настройки"
-
-msgid "Interfaces:"
-msgstr "Интерфейсы:"
-
-msgid "Log directory:"
-msgstr "Папка журнала:"
-
-msgid "Media directories:"
-msgstr "Папки медиа:"
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-"MiniDLNA - это серверное программное обеспечение, имеющее цель обеспечения "
-"полной совместимости с клиентами DLNA/UPnP-AV."
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Номер модели который, miniDLNA будет сообщать клиентам в своём XML-описании."
-
-msgid "Music"
-msgstr "Музыка"
-
-msgid "Network interfaces to serve."
-msgstr "Обслуживаемые сетевые интерфейсы."
-
-msgid "Notify interval in seconds."
-msgstr "Интервал уведомления (секунды)."
-
-msgid "Notify interval:"
-msgstr "Интервал уведомления:"
-
-msgid "Pictures"
-msgstr "Картинки"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "Порт для HTTP-трафика (описания, SOAP, передача мультимедиа)"
-
-msgid "Port:"
-msgstr "Порт:"
-
-msgid "Presentation URL:"
-msgstr "URL представления:"
-
-msgid "Root container:"
-msgstr "Корневой контейнер:"
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-"Серийный номер, который miniDLNA будет сообщать клиентам в своём XML-"
-"описании."
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr "Изменение имени отображения для клиентов."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-"Папка, в которой miniDLNA будет хранить свою базу данных и кэш обложек "
-"альбомов."
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr "Папка, в которой miniDLNA будет хранить свой файл журнала."
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-"Включение наблюдения inotify для автоматического обнаружения новых файлов."
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-"Установите для включения поддержки потокового воспроизведения файлов .jpg и ."
-"mp3 для TiVo с поддержкой HMO."
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"Установите для строгого соответствия стандартам DLNA. Это разрешит "
-"уменьшение размера слишком больших JPEG-изображений на стороне сервера, что "
-"может повредить производительности (по крайней мере) DLNA-продуктов Sony."
-
-#, fuzzy
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"Директории, которые необходимо сканировать. Если вы хотите установить "
-"ограничение на определённый тип содержимого в директории, вы можете написать "
-"тип ('A' для аудио, 'V' для видео, 'P' для изображений) перед путём к "
-"директории, за которым следует запятая (напр. media_dir=A,/mnt/media/Music). "
-"Может быть указано несколько директорий."
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "Укажите путь к сокету MiniSSDPd."
-
-msgid "Standard container"
-msgstr "Стандартный контейнер"
-
-msgid "Strict to DLNA standard:"
-msgstr "Строгий стандарт DLNA:"
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-"Сервис miniDLNA запущен, обслуживает %d аудио-, %d видео- и %d файлов с "
-"изображениями."
-
-msgid "The miniDLNA service is not running."
-msgstr "Сервис miniDLNA не запущен."
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr "Это список файлов, среди которых необходимо искать обложки альбомов."
-
-msgid "Video"
-msgstr "Видео"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "Статус miniDLNA"
-
-msgid "miniSSDP socket:"
-msgstr "Сокет miniSSDP:"
diff --git a/po/ru/mmc_over_gpio.po b/po/ru/mmc_over_gpio.po
deleted file mode 100644
index dcc2e93..0000000
--- a/po/ru/mmc_over_gpio.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: mmc_over_gpio\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 11:23+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "CLK_pin"
-msgstr "Вывод CLK"
-
-msgid "CS_pin"
-msgstr "Вывод CS"
-
-msgid "DI_pin"
-msgstr "Вывод DI"
-
-msgid "DO_pin"
-msgstr "Вывод DO"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "MMC/SD driver configuration"
-msgstr "Конфигурация драйвера MMC/SD"
-
-msgid "Mode"
-msgstr "Режим"
-
-msgid "Name"
-msgstr "Имя"
-
-msgid "Settings"
-msgstr "Настройки"
diff --git a/po/ru/multiwan.po b/po/ru/multiwan.po
deleted file mode 100644
index c12d920..0000000
--- a/po/ru/multiwan.po
+++ /dev/null
@@ -1,127 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: multiwan\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 14:05+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr "Количество попыток перед обработкой отказа WAN"
-
-msgid "Attempts Before WAN Recovery"
-msgstr "Количество попыток перед восстановлением WAN"
-
-msgid "Auto"
-msgstr "Автоматически"
-
-msgid "Collecting data..."
-msgstr "Сбор данных..."
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-"Укажите правила для направления исходящего трафика через заданные восходящие "
-"каналы WAN."
-
-msgid "DNS Server(s)"
-msgstr "DNS-сервер(ы)"
-
-msgid "Default Route"
-msgstr "Маршрут по умолчанию"
-
-msgid "Destination Address"
-msgstr "Адрес назначения"
-
-msgid "Disable"
-msgstr "Отключить"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "Failing"
-msgstr "Отказ"
-
-msgid "Failover Traffic Destination"
-msgstr "Назначение трафика при обработке отказа"
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "ICMP-хост(ы) для контроля состояния"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "Тайм-аут контроля состояния по ICMP"
-
-msgid "Health Monitor Interval"
-msgstr "Интервал контроля состояния"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-"Контроль состояния определяет и исправляет изменения сети и неисправные "
-"соединения."
-
-msgid "KO"
-msgstr "Не работает"
-
-msgid "Load Balancer Distribution"
-msgstr "Распределение балансировки нагрузки"
-
-msgid "Load Balancer(Compatibility)"
-msgstr "Балансировка нагрузки (совместимость)"
-
-msgid "Load Balancer(Performance)"
-msgstr "Балансировка нагрузки (производительность)"
-
-msgid "Multi-WAN"
-msgstr "Мульти-WAN"
-
-msgid "Multi-WAN Status"
-msgstr "Состояние мульти-WAN"
-
-msgid "Multi-WAN Traffic Rules"
-msgstr "Правила для мульти-WAN трафика"
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-"Мульти-WAN позволяет использовать несколько портов восходящего канала для "
-"балансировки нагрузки и отказоустойчивости."
-
-msgid "None"
-msgstr "Ни один из"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "Ports"
-msgstr "Порты"
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid "Recovering"
-msgstr "Восстановление"
-
-msgid "Source Address"
-msgstr "Адрес отправителя"
-
-msgid "Unknown"
-msgstr "Неизвестно"
-
-msgid "WAN Interfaces"
-msgstr "WAN-интерфейсы"
-
-msgid "WAN Uplink"
-msgstr "Восходящий канал WAN"
-
-msgid "all"
-msgstr "все"
diff --git a/po/ru/ntpc.po b/po/ru/ntpc.po
deleted file mode 100644
index 229b610..0000000
--- a/po/ru/ntpc.po
+++ /dev/null
@@ -1,55 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: ntpc\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-08-15 11:41+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Clock Adjustment"
-msgstr "Корректировка часов"
-
-msgid "Count of time measurements"
-msgstr "Количество измерений времени"
-
-msgid "Current system time"
-msgstr "Текущее время"
-
-msgid "General"
-msgstr "Общие"
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid "Offset frequency"
-msgstr "Смещение частоты"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Synchronizes the system time"
-msgstr "Синхронизирует системное время"
-
-msgid "Time Server"
-msgstr "Сервер времени"
-
-msgid "Time Servers"
-msgstr "Серверы времени"
-
-msgid "Time Synchronisation"
-msgstr "Синхронизация времени"
-
-msgid "Update interval (in seconds)"
-msgstr "Интервал обновления (в секундах)"
-
-msgid "empty = infinite"
-msgstr "пусто = бесконечно"
diff --git a/po/ru/olsr.po b/po/ru/olsr.po
deleted file mode 100644
index 5c0f66e..0000000
--- a/po/ru/olsr.po
+++ /dev/null
@@ -1,681 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: olsr\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-16 16:32+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Active MID announcements"
-msgstr "Активные объявления MID"
-
-msgid "Active OLSR nodes"
-msgstr "Активные OLSR-узлы"
-
-msgid "Active host net announcements"
-msgstr "Активные объявления хост-сети (HNA)"
-
-msgid "Advanced Settings"
-msgstr "Расширенные настройки"
-
-msgid "Allow gateways with NAT"
-msgstr "Разрешить шлюзы с NAT"
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr "Разрешить выбор исходящего IPv4-шлюза с NAT"
-
-msgid "Announce uplink"
-msgstr "Объявлять восходящий канал"
-
-msgid "Announced network"
-msgstr "Объявленная сеть"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-"Оба значения должны быть в десятичном представлении с разделительными "
-"точками."
-
-msgid "Broadcast address"
-msgstr "Широковещательный адрес"
-
-msgid "Configuration"
-msgstr "Конфигурация"
-
-msgid "Device"
-msgstr "Устройство"
-
-msgid "Display"
-msgstr "Показать"
-
-msgid "Downlink"
-msgstr "Нисходящий канал"
-
-msgid "Download Config"
-msgstr "Загрузить конфигурацию"
-
-msgid "ETX"
-msgstr "ETX"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-"Включить SmartGateway. Если выключено, все остальные параметры SmartGateway "
-"игнорируются. По умолчанию \"нет\"."
-
-msgid "Enable this interface."
-msgstr "Использовать этот интерфейс."
-
-msgid "Enabled"
-msgstr "Включено"
-
-msgid "Expected retransmission count"
-msgstr "Ожидаемое количество повторных передач"
-
-msgid "FIB metric"
-msgstr "Метрика FIB"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-"Метрика FIB управляет значением метрики хост-маршрутов, которые "
-"устанавливает OLSRd. При \"flat\" значение метрики всегда равно 2. Это "
-"предпочтительное значение, помогающее ядру Linux очищать устаревшие "
-"маршруты. При \"correct\" используется счётчик прыжков в качестве значения "
-"метрики. \"approx\" также испозьзует счётчик прыжков, но его обновление "
-"происходит только при изменении следующего прыжка. По умолчанию используется "
-"\"flat\"."
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr "Механизм рыбьего глаза для TC. По умолчанию \"включено\""
-
-msgid "Gateway"
-msgstr "Шлюз"
-
-msgid "General Settings"
-msgstr "Общие настройки"
-
-msgid "General settings"
-msgstr "Общие настройки"
-
-msgid "HNA"
-msgstr "HNA"
-
-msgid "HNA Announcements"
-msgstr "Объявления HNA"
-
-msgid "HNA interval"
-msgstr "HNA интервал"
-
-msgid "HNA validity time"
-msgstr "Время действия HNA"
-
-msgid "Hello"
-msgstr "Приветственное сообщение"
-
-msgid "Hello interval"
-msgstr "Интервал приветственных сообщений"
-
-msgid "Hello validity time"
-msgstr "Время действия приветственного сообщения"
-
-msgid "Hna4"
-msgstr "Hna4"
-
-msgid "Hna6"
-msgstr "Hna6"
-
-msgid "Hops"
-msgstr "Прыжки"
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-"Хосты в маршрутизируемой сети OLSR могут извещать о подключении к внешним "
-"сетям с помощью сообщений HNA."
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-"Гистерезис для автоопределения канала (только для метрики кол-ва прыжков). "
-"Гистерезис увеличивает надёжность канала, но вносит задержку в регистрацию "
-"соседних устройств. По умолчанию \"да\""
-
-msgid "IP Addresses"
-msgstr "IP-адреса"
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-"Версия IP, которая будет использована. Если выбрано 6and4, olsrd будет "
-"запущен для каждой версии."
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 broadcast"
-msgstr "Широковещательный IPv4"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-"Широковещательный IPv4-адрес для исходящих OLSR-пакетов, например, "
-"255.255.255.255. Адрес по умолчанию \"0.0.0.0\" ведёт к использованию "
-"широковещательного IP-адреса интерфейса."
-
-msgid "IPv4 source"
-msgstr "IPv4-источник"
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-"IPv4-адрес отправителя для исходящих OLSR-пакетов. Адрес по умолчанию "
-"\"0.0.0.0\" включает использование IP-адреса интерфейса."
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 multicast"
-msgstr "Групповой IPv6"
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr "Групповой IPv6-адрес. По умолчанию \"FF02::6D\"."
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-"IPv6-сеть должна быть указана в полной нотации, префикс должен быть в "
-"нотации CIDR."
-
-msgid "IPv6 source"
-msgstr "IPv6-источник"
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-"Префикс источника IPv6. OLSRd выберет один из IP-адресов интерфейса, "
-"соответствующий данному префиксу. По умолчанию \"0::/0\" включает "
-"использование нелокального IP-адреса интерфейса."
-
-msgid "IPv6-Prefix of the uplink"
-msgstr "IPv6-префикс восходящего канала"
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-"Если маршрут к текущему шлюзу должен быть изменён, значение ETX данного "
-"шлюза умножается на указанное число перед сравнением с новым значением. "
-"Значение данного параметра может быть в пределах от 0.1 до 1.0, но при "
-"изменении должно быть ближе к 1.0.<br /><b>ВНИМАНИЕ:</b>Не используйте "
-"данный параметр вместе с метрикой etx_ffeth!<br />По умолчанию \"1.0\"."
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-"Использует ли данный узел NAT для подключения к интернету. По умолчанию \"да"
-"\"."
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-"Режим интерфейса используется для предотвращения ненужных перенаправлений на "
-"коммутируемых Ethernet-интерфейсах. Возможные значения режима: \"mesh\" и "
-"\"ether\". По умолчанию \"mesh\"."
-
-msgid "Interfaces"
-msgstr "Интерфейсы"
-
-msgid "Interfaces Defaults"
-msgstr "Значения по умолчанию для интерфейсов"
-
-msgid "Internet protocol"
-msgstr "Интернет-протокол"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-"Интервал опроса сетвых интерфейсов на наличие изменений в конфигурации "
-"(сек.). По умолчанию, \"2.5\"."
-
-msgid "Known OLSR routes"
-msgstr "Известные OLSR-маршруты"
-
-msgid "LQ"
-msgstr "LQ"
-
-msgid "LQ aging"
-msgstr "Старение LQ"
-
-msgid "LQ algorithm"
-msgstr "Алгоритм LQ"
-
-#, fuzzy
-msgid "LQ fisheye"
-msgstr "Рыбий глаз LQ"
-
-msgid "LQ level"
-msgstr "Уровень LQ"
-
-msgid "Last hop"
-msgstr "Последний прыжок"
-
-msgid "Legend"
-msgstr "Легенда"
-
-msgid "Library"
-msgstr "Библиотека"
-
-msgid "Link Quality Settings"
-msgstr "Настройки качества соединения (LQ)"
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-"Коэффициент старения LQ (только для уровня LQ, равного 2). Параметр "
-"подстройки для etx_float и etx_fpm. Чем меньше значение, тем меньше "
-"изменения значения ETX. Диапазон допустимых значений от 0.01 до 1.0."
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-"Алгоритм LQ (только для уровня LQ, равного 2).<br /><b>etx_float</b>: ETX с "
-"плавающей точкой и экспоненциальным старением<br /><b>etx_fpm</b> : тоже что "
-"и etx_float, но с целочисленной арифметикой<br /><b>etx_ff</b> : ETX "
-"freifunk, использует весь трафик OLSR для расчета ETX<br /><b>etx_ffeth</b>: "
-"несовместимый вариант etx_ff, разрешающий Ethernet-соединения с ETX 0.1.<br /"
-">По умолчанию \"etx_ff\""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-"Переключатель уровня LQ между маршрутизацией по кол-во прыжков и ETX.<br /"
-"><b>0</b> = не использовать LQ<br /><b>2</b> = использовать LQ для выбора "
-"MPR и маршрутизации<br />По умолчанию \"2\""
-
-msgid "LinkQuality Multiplicator"
-msgstr "Множитель LQ"
-
-msgid "Links per node (average)"
-msgstr "Кол-во соединений на узел (среднее)"
-
-msgid "Links total"
-msgstr "Общее кол-во соединений"
-
-msgid "Local interface IP"
-msgstr "IP-адрес локального интерфейса"
-
-msgid "MID"
-msgstr "MID"
-
-msgid "MID interval"
-msgstr "Интервал MID"
-
-msgid "MID validity time"
-msgstr "Время действия MID"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Main IP"
-msgstr "Основной IP-адрес"
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Удостоверьтесь, что OLSRd работает, модуль \"txtinfo\" загружен, настроен на "
-"порт 2006 и принимает соединения от \"127.0.0.1\"."
-
-msgid "Metric"
-msgstr "Метрика"
-
-msgid "Mode"
-msgstr "Режим"
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-"Умножить маршруты на указанный коэффициент в пределах от 0.01 до 1. Данный "
-"коэффициент используется только в случае, если LQ уровень > 0. Примеры:<br /"
-">уменьшить LQ для 192.168.0.1 на половину: 192.168.0.1 0.5<br />уменьшить LQ "
-"для всех узлов на данном интерфейсе на 20%: default 0.8"
-
-msgid "NAT threshold"
-msgstr "Порог NAT"
-
-msgid "NLQ"
-msgstr "NLQ"
-
-msgid "Neighbors"
-msgstr "Соседние узлы"
-
-msgid "Neighbour IP"
-msgstr "Соседние IP-адреса"
-
-msgid "Neighbours"
-msgstr "Соседние узлы"
-
-msgid "Netmask"
-msgstr "Маска сети"
-
-msgid "Network"
-msgstr "Сеть"
-
-msgid "Network address"
-msgstr "Сетевой адрес"
-
-msgid "Nic changes poll interval"
-msgstr "Интервал опроса изменений NIC"
-
-msgid "Nodes"
-msgstr "Узлы"
-
-msgid "OLSR"
-msgstr "OLSR"
-
-msgid "OLSR - Display Options"
-msgstr "OLSR - Настройки отображения"
-
-msgid "OLSR - HNA-Announcements"
-msgstr "OLSR - HNA-объявления"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - Модули"
-
-msgid "OLSR Daemon"
-msgstr "Сервис OLSR"
-
-msgid "OLSR Daemon - Interface"
-msgstr "Сервис OLSR - Интерфейс"
-
-msgid "OLSR connections"
-msgstr "OLSR-соединения"
-
-msgid "OLSR gateway"
-msgstr "OLSR-шлюз"
-
-msgid "OLSR node"
-msgstr "OLSR-узел"
-
-msgid "Overview"
-msgstr "Обзор"
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Обзор текущих активных OLSR-объявлений HNA"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Обзор установленных OLSR-соединений"
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Обзор текущих известных OLSR-узлов"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Обзор известных маршрутов к OLSR-узлам"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr "Обзор интерфейсов с запущенным OLSR"
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Обзор известных мульти-интерфейсных извещений"
-
-# Может таки "умные" шлюзы? Или вообще SmartGW...
-#, fuzzy
-msgid "Overview of smart gateways in this network"
-msgstr "Обзор смарт-шлюзов в сети"
-
-msgid "Plugin configuration"
-msgstr "Настройки модулей"
-
-msgid "Plugins"
-msgstr "Модули"
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr "Периодичность опроса OLSR-сокетов в секундах. 0.05 по умолчанию."
-
-msgid "Pollrate"
-msgstr "Частота опроса"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Prefix"
-msgstr "Префикс"
-
-msgid "Resolve"
-msgstr "Разрешать имена"
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-"Разрешать имена хостов на страницах состояния. Не используйте данную "
-"функцию, если у вас публичный IP-адрес и нестабильный DNS. В противном "
-"случае загрузка страниц состояния может происходить очень медленно."
-
-msgid "Routes"
-msgstr "Маршруты"
-
-msgid "Secondary OLSR interfaces"
-msgstr "Вторичные OLSR-интерфейсы"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-"Устанавливает основной IP-адрес маршрутизатора. Данный адрес НИКОГДА не "
-"будет изменяться во время работы olsrd. По умолчанию 0.0.0.0 (используется "
-"IP-адрес первого сетевого интерфейса)."
-
-msgid "SmartGW"
-msgstr "SmartGW"
-
-msgid "SmartGW announcements"
-msgstr "Объявления SmartGW"
-
-msgid "SmartGateway is not configured on this system."
-msgstr "SmartGW не сконфигурирован на этой системе."
-
-msgid "Source address"
-msgstr "Адрес источника"
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-"Устанавливает скорость восходящего канала (кбит/с). Первый параметр "
-"указывает на прямое, а второй на обратное направление. По умолчанию \"128 "
-"1024\"."
-
-msgid "Speed of the uplink"
-msgstr "Скорость восходящего канала"
-
-msgid "State"
-msgstr "Состояние"
-
-msgid "Status"
-msgstr "Статус"
-
-#, fuzzy
-msgid "Success rate of packages received from the neighbour"
-msgstr "Скорость посылок, принятых соседним узлом"
-
-#, fuzzy
-msgid "Success rate of packages sent to the neighbour"
-msgstr "Скорость посылок, отправленных соседнему узлу"
-
-msgid "TC"
-msgstr "TC"
-
-msgid "TC interval"
-msgstr "Интервал TC"
-
-msgid "TC validity time"
-msgstr "Время действия TC"
-
-msgid "TOS value"
-msgstr "Значение ToS"
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-"Сервис OLSRd реализует поддержку протокола OLSR (Optimized Link State "
-"Routing) и тем самым обеспечивает ячеистую маршрутизацию для любого сетевого "
-"оборудования. OLSRd может работать на любом Wi-Fi-адаптере или устройстве "
-"Ethernet с поддержкой режима ad-hoc. Более подробную информацию можно найти "
-"на <a href='http://www.olsr.org'>olsr.org</a>."
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-"Фиксированное значение готовности. Если не задано, то будет рассчитываться "
-"динамически на основе состояния батареи/питания. По умолчанию \"3\"."
-
-msgid "The interface OLSRd should serve."
-msgstr "Интерфейс, обслуживаемый OLSRd."
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-"Порт, используемый для OLSR. Рекомендуется использовать присвоенный IANA "
-"порт 698. Допустимо любое значение в диапазоне от 1 до 65535."
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-"Может быть использовано для оповещения клиентов об IPv6-префиксе восходящего "
-"канала. Это может позволить клиентам изменять свой локальный IPv6-адрес для "
-"использования IPv6-шлюза без какой-либо трансляции адресов. Максимальная "
-"длина префикса - 64 бита. По умолчанию \"::/0\" (без префикса)."
-
-msgid "Timing and Validity"
-msgstr "Время и сроки действия"
-
-msgid "Topology"
-msgstr "Топология"
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-"Значение поля ToS IP -аголовка управляющего трафика. По умолчанию \"16\"."
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "Не удалось подключиться к сервису OLSR!"
-
-msgid "Uplink"
-msgstr "Восходящий канал"
-
-msgid "Uplink uses NAT"
-msgstr "Восходящий канал использует NAT"
-
-msgid "Use hysteresis"
-msgstr "Использовать гистерезис"
-
-msgid "Version"
-msgstr "Версия"
-
-msgid "WLAN"
-msgstr "WLAN"
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-"Внимание: kmod-ipip не установлен. Без kmod-ipip SmartGateway не будет "
-"работать, пожалуйста, установите этот пакет."
-
-msgid "Weight"
-msgstr "Вес"
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-"При использовании нескольких соединений между хостами, вес служит для выбора "
-"используемого интерфейса. Обычно, вес рассчитывается автоматически olsrd на "
-"основе характеристик интерфейса, но данное поле позволяет установить вес "
-"вручную. Olsrd выберет соединения с наименьшим значением веса.<br /"
-"><b>Замечание: вес интерфейса используется только в случае установки поля "
-"\"Уровень LQ\" в 0. Для любых других значений поля \"Уровень LQ\", "
-"используется значение поля ETX."
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-"Какой вид восходящего канала экпортируется другим узлам ячеистой сети. "
-"Определение восходящего канала происходит при наличии в локальном HNA "
-"0.0.0.0/0, ::ffff:0:0/96 или 2000::/3. Значение по умолчанию: \"оба\"."
-
-msgid "Willingness"
-msgstr "Готовность"
diff --git a/po/ru/openvpn.po b/po/ru/openvpn.po
deleted file mode 100644
index 7f8afc1..0000000
--- a/po/ru/openvpn.po
+++ /dev/null
@@ -1,575 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: openvpn\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-11-01 21:58+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p' или 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Принимать опции, отправленные с сервера"
-
-msgid "Add"
-msgstr "Добавить"
-
-msgid "Add route after establishing connection"
-msgstr "Добавить маршрут после установки соединения"
-
-msgid "Additional authentication over TLS"
-msgstr "Дополнительная аутентификация через TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Разрешить общение клиентов друг с другом"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Разрешить несколько клиентов с одним сертификатом"
-
-msgid "Allow only one session"
-msgstr "Разрешить только одну сессию"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Позволить удалённому хосту изменять IP-адрес или порт"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Разрешённое максимальное количество подключенных клиентов"
-
-msgid "Allowed maximum of internal"
-msgstr "Разрешённое максимальное количество внутренних"
-
-msgid "Allowed maximum of new connections"
-msgstr "Разрешённое максимальное количество новых соединений"
-
-msgid "Append log to file"
-msgstr "Дописать журнал в файл"
-
-msgid "Authenticate using username/password"
-msgstr "Аутентификация с использованием имени пользователя и пароля"
-
-msgid "Automatically redirect default route"
-msgstr "Автоматически перенаправлять маршруты по умолчанию"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr "Список настроенных процессов OpenVPN и их текущее состояние"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "Команда/скрипт, запускаем(ая/ый) перед закрытием TUN/TAP"
-
-msgid "Certificate authority"
-msgstr "Центр сертификации"
-
-msgid "Change process priority"
-msgstr "Изменить приоритет процесса"
-
-msgid "Change to directory before initialization"
-msgstr "Перейти в указанную директорию перед инициализацией"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Проверить сертификат пира в CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Выполнить chroot на указанную директорию после инициализации"
-
-msgid "Client is disabled"
-msgstr "Клиент выключен"
-
-msgid "Configuration category"
-msgstr "Категория конфигурации"
-
-msgid "Configure client mode"
-msgstr "Настроить режим клиента"
-
-msgid "Configure server bridge"
-msgstr "Настроить мост"
-
-msgid "Configure server mode"
-msgstr "Настроить режим сервера"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Соединяться используя Socks5-прокси"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "Подключиться к удалённому хосту через HTTP-прокси"
-
-msgid "Connection retry interval"
-msgstr "Интервал между попытками подключения"
-
-msgid "Cryptography"
-msgstr "Криптография"
-
-msgid "Daemonize after initialization"
-msgstr "Перейти в режим демона после инициализации"
-
-msgid "Delay n seconds after connection"
-msgstr "Задержка n секунд после подключения"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-"Использовать задержку перед открытием устройства tun и выполнением скрипта"
-
-msgid "Diffie Hellman parameters"
-msgstr "Параметры алгоритма DH"
-
-msgid "Directory for custom client config files"
-msgstr "Директория пользовательских файлов конфигурации клиентов"
-
-msgid "Disable Paging"
-msgstr "Выключить пейджинг"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Выключить вектор инициализации шифра"
-
-msgid "Disable options consistency check"
-msgstr "Выключить проверку целостности опций"
-
-msgid "Disable replay protection"
-msgstr "Отключить проверку повторов"
-
-msgid "Do not bind to local address and port"
-msgstr "Не выполнять привязку к локальному адресу и порту"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Не выполнять ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "Не добавлять маршруты автоматически"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "Не кешировать пароли --askpass или --auth-user-pass"
-
-#, fuzzy
-msgid "Don't inherit global push options"
-msgstr "Не наследовать глобальные параметры push"
-
-msgid "Don't log timestamps"
-msgstr "Не записывать отметки времени в журнал"
-
-msgid "Don't re-read key on restart"
-msgstr "Не считывать заново ключ при перезапуске"
-
-msgid "Don't require client certificate"
-msgstr "Не требовать сертификат у клиента"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Не использовать адаптивное сжатие LZO"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "Не извещать об ошибках ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Выводить параметры в журнал"
-
-msgid "Empirically measure MTU"
-msgstr "Эмпирически измерять MTU"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Включить поддержку аппаратного шифрования OpenSSL"
-
-msgid "Enable Path MTU discovery"
-msgstr "Включить обнаружение пути MTU (PMTUD)"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Включить шифрование с постоянным ключом (не TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Включить TLS в режиме клиента"
-
-msgid "Enable TLS and assume server role"
-msgstr "Включить TLS в режиме сервера"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Включить внутреннюю фрагментацию дейтаграмм"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Включить интерфейс управления на <em>IP</em> <em>порту</em>"
-
-msgid "Enabled"
-msgstr "Включено"
-
-msgid "Encryption cipher for packets"
-msgstr "Шифрование для пакетов"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Выполнить shell-команду после добавления маршрутов"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Выполнить shell-команду при изменении IP-адреса удалённого хоста"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-"Выполняется в режиме сервера при появлении новых клиентских соединений, если "
-"к клиенту ещё нет доверия"
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-"Выполняется в режиме сервера, когда адрес/маршрут IPv4 или MAC-адрес "
-"добавлен в таблицу маршрутизации OpenVPN"
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Выйти при ошибке согласования TLS"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Получить пароль PEM от управляющей консоли перед уходом в фон"
-
-msgid "HMAC authentication for packets"
-msgstr "HMAC-аутентификация для пакетов"
-
-msgid "Handling of authentication failures"
-msgstr "Обработка ошибок аутентификации"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-"Вспомогательная директива для упрощения выражений --ping и --ping-restart в "
-"конфигурациях серверного режима"
-
-msgid "If hostname resolve fails, retry"
-msgstr "Пытаться заново подключиться при ошибке определения имени хоста"
-
-msgid "Instance \"%s\""
-msgstr "Процесс \"%s\""
-
-msgid "Invalid"
-msgstr "Неверный"
-
-msgid "Keep local IP address on restart"
-msgstr "Не изменять локальный IP-адрес при перезапуске"
-
-msgid "Keep remote IP address on restart"
-msgstr "Не изменять удалённый IP-адрес при перезапуске"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Не закрывать устройство tun/tap при перезапуске"
-
-# Может "Окно перехода ключей", надо смотреть контекст
-#, fuzzy
-msgid "Key transition window"
-msgstr "Окно передачи ключей"
-
-msgid "Limit repeated log messages"
-msgstr "Ограничить повторяющиеся сообщения журнала"
-
-msgid "Local certificate"
-msgstr "Локальный сертификат"
-
-msgid "Local host name or ip address"
-msgstr "Имя локального хоста или IP-адрес"
-
-msgid "Local private key"
-msgstr "Локальный секретный ключ"
-
-msgid "Major mode"
-msgstr "Основной режим"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Включить поддержку IPv6 для устройства tun"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Максимальное количество исходящих TCP-пакетов в очереди"
-
-msgid "Networking"
-msgstr "Сеть"
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Количество выделенных широковещательных буферов"
-
-msgid "Number of lines for log file history"
-msgstr "Количество строк в файле журнала"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Принимать соединения только от данного имени X509"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-"Обрабатывать таймаут ping-запросов только в случае, когда существует "
-"необходимый маршрут"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "Процессы OpenVPN"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Оптимизировать запись TUN/TAP/UDP"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Выводить сообщения в системный журнал и не переходить в фоновый режим"
-
-msgid "Overview"
-msgstr "Обзор"
-
-msgid "PKCS#12 file containing keys"
-msgstr "Файл с ключами PKCS#12"
-
-msgid "Pass environment variables to script"
-msgstr "Передавать переменные окружения скрипту"
-
-msgid "Persist replay-protection state"
-msgstr "Сохранять состояние защищённого ответа"
-
-#, fuzzy
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Сохранять/не сохранять пул ifconfig"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Выполнять ping каждые n секунд, используя порт TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr "Уровень безопасности для внешних программ и скриптов"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid "Proxy timeout in seconds"
-msgstr "Таймаут прокси (сек.)"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Передавать опцию ifconfig удалённой стороне"
-
-msgid "Push options to peer"
-msgstr "Передавать опции пиру"
-
-msgid "Query management channel for private key"
-msgstr "Запросить канал управления для закрытого ключа"
-
-msgid "Randomly choose remote server"
-msgstr "Случайно выбирать удалённый сервер"
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-"Разорвать соединение, если пользовательская конфигурация клиента отсутствует"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Обрабатывать сигнал SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Имя удалённого хоста или IP-адрес"
-
-msgid "Remote ping timeout"
-msgstr "Таймаут удалённых ping-запросов"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Пересогласовать ключ канала данных после кол-ва байт"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Пересогласовать ключ канала данных после кол-ва пакетов"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "Пересогласовать ключ канала данных после кол-ва секунд"
-
-#, fuzzy
-msgid "Replay protection sliding window size"
-msgstr "Размер скользящего окна защиты от повторов"
-
-msgid "Require explicit designation on certificate"
-msgstr "Требовать явного указания в сертификате"
-
-msgid "Require explicit key usage on certificate"
-msgstr "Требовать явного использования ключа в сертификате"
-
-msgid "Restart after remote ping timeout"
-msgstr "Начать заново после таймаута ping-запроса"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Таймаут повторной отправки канала управления TLS"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Постоянно пытаться заново подключиться при ошибке HTTP-прокси"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Постоянно пытаться заново подключиться при ошибке Socks-прокси"
-
-msgid "Route subnet to client"
-msgstr "Перенаправить подсеть клиенту"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Запустить как inetd- или xinetd-сервер"
-
-msgid "Run script cmd on client connection"
-msgstr "Выполнить скрипт при подключении клиента"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Выполнить скрипт при отключении клиента"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Запускать up/down скрипты для всех перезапусков"
-
-msgid "Send notification to peer on disconnect"
-msgstr "Послать уведомление пиру при разъединении"
-
-msgid "Service"
-msgstr "Служба"
-
-msgid "Set GID to group"
-msgstr "Установить GID группе"
-
-msgid "Set TCP/UDP MTU"
-msgstr "Установить TCP/UDP MTU"
-
-msgid "Set UID to user"
-msgstr "Установить UID пользователю"
-
-#, fuzzy
-msgid "Set aside a pool of subnets"
-msgstr "Установить пул подсетей"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Установить расширенные настройки HTTP-прокси"
-
-msgid "Set output verbosity"
-msgstr "Установить уровень вывода"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr "Установить размер реальной и виртуальной хеш-таблиц"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Установить размер буфера приёма TCP/UDP"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Установить размер буфера передачи TCP/UDP"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Установить размер очереди передачи tun/tap"
-
-msgid "Set tun/tap adapter parameters"
-msgstr "Установить параметры адаптера tun/tap"
-
-msgid "Set tun/tap device MTU"
-msgstr "Установить MTU для tun/tap устройства"
-
-msgid "Set tun/tap device overhead"
-msgstr "Установить накладные расходы tun/tap устройства"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Установить верхнюю границу для TCP MSS"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Шейпинг пропускной способности пира"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Выполнить shell-команду после открытия устройства tun"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Выполнить shell-команду после закрытия устройства tun"
-
-msgid "Shell command to verify X509 name"
-msgstr "Shell-команда для проверки имени X509"
-
-msgid "Silence the output of replay warnings"
-msgstr "Заглушить вывод предупреждений повторов"
-
-msgid "Size of cipher key"
-msgstr "Размер ключа шифрования"
-
-msgid "Specify a default gateway for routes"
-msgstr "Установить шлюз по умолчанию для маршрутов"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Запустить OpenVPN в спящем режиме"
-
-msgid "Start/Stop"
-msgstr "Старт/Стоп"
-
-msgid "Started"
-msgstr "Запущено"
-
-msgid "Status file format version"
-msgstr "Версия формата статусного файла"
-
-msgid "Switch to advanced configuration »"
-msgstr "Перейти к расширенным настройкам »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Номер локального и удалённого TCP/UDP порта"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Номер локального TCP/UDP порта (1194 по умолчанию)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Номер удалённого TCP/UDP порта (1194 по умолчанию)"
-
-msgid "TLS cipher"
-msgstr "Шифр TLS"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "Пропуск ToS (только для IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Временная директория для файла возрата подключения клиента"
-
-msgid "Timeframe for key exchange"
-msgstr "Временное окно для обмена ключами"
-
-msgid "Type of used device"
-msgstr "Тип используемого устройства"
-
-msgid "Use fast LZO compression"
-msgstr "Использовать быстрое сжатие LZO"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Использовать адреса вместо подсетей /30"
-
-msgid "Use protocol"
-msgstr "Использовать протокол"
-
-msgid "Use tun/tap device node"
-msgstr "Использовать файл устройства tun/tap"
-
-msgid "Use username as common name"
-msgstr "Использовать имя пользователя как общее имя"
-
-msgid "VPN"
-msgstr "VPN"
-
-msgid "Write log to file"
-msgstr "Записать журнал в файл"
-
-msgid "Write process ID to file"
-msgstr "Записать ID процесса в файл"
-
-msgid "Write status to file every n seconds"
-msgstr "Записывать статус в файл каждые n секунд"
-
-msgid "no"
-msgstr "нет"
-
-msgid "tun/tap device"
-msgstr "устройство tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr "таймаут простоя tun/tap"
-
-msgid "yes (%i)"
-msgstr "да (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« Перейти к основным настройкам"
-
-#~ msgid "openvpn_%s"
-#~ msgstr "openvpn_%s"
-
-#~ msgid "openvpn_%s_desc"
-#~ msgstr "openvpn_%s_описание"
diff --git a/po/ru/p2pblock.po b/po/ru/p2pblock.po
deleted file mode 100644
index 71f30e9..0000000
--- a/po/ru/p2pblock.po
+++ /dev/null
@@ -1,48 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: p2pblock\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-06-01 12:02+0200\n"
-"PO-Revision-Date: 2012-08-15 11:26+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Block Time"
-msgstr "Время блокировки"
-
-msgid "Enable P2P-Block"
-msgstr "Включить блокировку P2P"
-
-#, fuzzy
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Протоколы 7-го уровня"
-
-msgid "P2P-Block"
-msgstr "Блокировка P2P"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"Блокировка P2P позволяет запретить P2P-протоколы для клиентов вне белого "
-"списка."
-
-msgid "Portrange"
-msgstr "Диапазон портов"
-
-msgid "Whitelisted IPs"
-msgstr "Белый список IP"
-
-msgid "seconds"
-msgstr "секунды"
diff --git a/po/ru/p910nd.po b/po/ru/p910nd.po
deleted file mode 100644
index 68a345f..0000000
--- a/po/ru/p910nd.po
+++ /dev/null
@@ -1,51 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: p910nd\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 11:42+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Bidirectional mode"
-msgstr "Двунаправленный режим"
-
-msgid "Device"
-msgstr "Устройство"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Для начала вам необходимо установить пакеты для поддержки USB (kmod-usb-"
-"printer) или параллельного порта (kmod-lp)."
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Settings"
-msgstr "Настройки"
-
-msgid "TCP listener port."
-msgstr "Прослушиваемый TCP-порт."
-
-msgid "enable"
-msgstr "включить"
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - сервер печати"
-
-#~ msgid "port_help"
-#~ msgstr "Помощь по портам"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr ""
-#~ "p910nd прослушивает порт 910+N. То есть 9100 - номер первого принтера."
diff --git a/po/ru/pbx-voicemail.po b/po/ru/pbx-voicemail.po
deleted file mode 100644
index ae49c6d..0000000
--- a/po/ru/pbx-voicemail.po
+++ /dev/null
@@ -1,174 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: pbx-voicemail\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 17:42+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr "Адрес эл. почты для получения голосовой почты"
-
-msgid "Enable Voicemail"
-msgstr "Включить голосовую почту"
-
-msgid "Global Voicemail Setup"
-msgstr "Глобальные настройки голосовой почты"
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-"Здесь Вы можете настроить голосовую почту АТС. Так как данная система "
-"является встраиваемой и предназначена для таких устройств как, например, "
-"маршрутизаторы, локальное хранилище голосовой почты отсутствует. Голосовая "
-"почта пересылается через электронную почту. Следовательно, вам нужно указать "
-"сервер исходящей почты (SMTP) и перечислить адреса, на которые будет "
-"пересылаться голосовая почта."
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-"Чтобы отсылать электронную почту с записями голосовой почты, вам необходимо "
-"указать SMTP-сервер. Вы можете использовать SMTP-сервер вашего интернет-"
-"провайдера или любой другой, например, SMTP-сервер Google или Yahoo."
-
-msgid "Last Sent Voicemail Log"
-msgstr "Запись журнала последнего отправленного сообщения голосовой почты"
-
-msgid "Local Storage Directory"
-msgstr "Локальная директория хранения"
-
-msgid "No"
-msgstr "Нет"
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr "Сервер исходящей почты (SMTP)"
-
-msgid "SMTP Password"
-msgstr "Пароль SMTP"
-
-msgid "SMTP Port Number"
-msgstr "Номер порта SMTP"
-
-msgid "SMTP Server Authentication"
-msgstr "Аутентификация SMTP-сервера"
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr "Имя SMTP-сервера или IP-адрес"
-
-msgid "SMTP User Name"
-msgstr "Имя пользователя SMTP"
-
-msgid "Secure Connection Using TLS"
-msgstr "Защищенное соединение с использованием TLS"
-
-msgid "Voicemail Setup"
-msgstr "Настройка голосовой почты"
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-"При включении голосовой почты, у вас будет возможность указать адреса "
-"электронной почты, на которые будут отправляться записи голосовой почты. Вы "
-"также должны указать SMTP-сервер ниже."
-
-msgid "Yes"
-msgstr "Да"
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-"Вы также можете сохранять копии сообщений голосовой почты локально на "
-"устройстве с запущенной АТС. Указанный здесь путь будет создан в случае его "
-"отсутствия. Учитывайте, что пространство для хранения сообщений голосовой "
-"почты может быть ограничено вашим устройством."
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
-"Ваш настоящий пароль SMTP здесь не показан. Он будет изменён только тогда, "
-"когда вы измените значение в этом поле."
-
-#~ msgid "Directory to save voicemail into"
-#~ msgstr "Директория для сохранения голосовой почты"
-
-#~ msgid "Email addresses to forward to"
-#~ msgstr "Адрес эл. почты для перенаправления"
-
-#~ msgid "Enabled"
-#~ msgstr "Включено"
-
-#~ msgid ""
-#~ "Here you can configure a global voicemail for this PBX. Since this system "
-#~ "is intended to run on embedded systems like routers, there is no local "
-#~ "storage of voicemail - it must be sent out by email. Therefore you need "
-#~ "to configure an outgoing mail (SMTP) server (for example the SMTP server "
-#~ "your ISP provides, or GMail), and provide a list of addresses the "
-#~ "voicemail will be sent to."
-#~ msgstr ""
-#~ "Здесь Вы можете настроить голосовую почту АТС. Так как данная система "
-#~ "является встраиваемой и предназначена для таких устройств как, например, "
-#~ "маршрутизаторы, локальное хранилище голосовой почты отсутствует. "
-#~ "Голосовая почта пересылается через электронную почту. Следовательно, Вам "
-#~ "нужно указать сервер (SMTP) исходящей почты и перечислить адреса на "
-#~ "которые будет пересылаться голосовая почта."
-
-#~ msgid ""
-#~ "In order for this PBX to send emails containing voicemail recordings, you "
-#~ "need to set up an SMTP server here. Your ISP usually provides an SMTP "
-#~ "server for that purpose. You can also set up a GMail, Yahoo, or other 3rd "
-#~ "party SMTP server."
-#~ msgstr ""
-#~ "Чтобы отсылать электронную почту с записями голосовой почты, Вам "
-#~ "необходимо указать SMTP сервер. Вы можете использовать SMTP сервер вашего "
-#~ "интернет провайдера или любой другой, например, SMTP сервер GMail или "
-#~ "Yahoo."
-
-#~ msgid "SMTP port number"
-#~ msgstr "Номер порта SMTP"
-
-#~ msgid "SMTP server authentication"
-#~ msgstr "Аутентификация SMTP сервера"
-
-#~ msgid "SMTP server hostname or IP"
-#~ msgstr "Имя SMTP сервера или IP адрес"
-
-#~ msgid "SMTP user name"
-#~ msgstr "Имя пользователя SMTP"
-
-#~ msgid "Timeout before sending callers to voicemail"
-#~ msgstr "Таймаут перед перенаправлением звонящих на голосовую почту"
-
-#~ msgid "Use TLS (secure connection)"
-#~ msgstr "Использовать TLS (защищенное соединение)"
-
-#~ msgid ""
-#~ "When you enable voicemail, you will have the opportunity to specify email "
-#~ "addresses which receive the message. You must also set up an SMTP server "
-#~ "below."
-#~ msgstr ""
-#~ "При включении голосовой почты, у Вас будет возможность указать адреса "
-#~ "электронной почты на которые будут отправляться записи голосовой почты. "
-#~ "Вы также должны указать SMTP сервер ниже."
diff --git a/po/ru/pbx.po b/po/ru/pbx.po
deleted file mode 100644
index b39fd1b..0000000
--- a/po/ru/pbx.po
+++ /dev/null
@@ -1,473 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-02 15:43+0200\n"
-"Last-Translator: Kamal <kamal.aliev@epscom.ru>\n"
-"Language-Team: none\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Advanced Settings"
-msgstr "Расширенные установки"
-
-msgid "Available"
-msgstr "Доступен"
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-"Старайтесь не использовать ничего, кроме алфавитно-цифровых символов, "
-"пробелов, запятых и точек."
-
-msgid "Away"
-msgstr "Отошел"
-
-msgid "Blacklisted Numbers"
-msgstr "Номера в \"черном\" списке"
-
-msgid "Call Routing"
-msgstr "Маршрутизация вызовов"
-
-msgid "Call-through Numbers"
-msgstr "Номера сквозных вызовов"
-
-msgid "Copy-paste large lists of numbers here."
-msgstr "Вставьте большие списки номеров здесь"
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr "Не беспокоить"
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr "Динамический список запрещенных номеров"
-
-msgid "Email"
-msgstr "Эл. почта"
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr "Разрешить входящие вызовы (регистрация через SIP)"
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr "Разрешить исходящие вызовы"
-
-msgid "Enabled"
-msgstr "Включено"
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr "Внешний порт SIP"
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr "Полное имя"
-
-msgid "General Settings"
-msgstr "Общие установки"
-
-msgid "Google Accounts"
-msgstr "Учетные записи Google"
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr "Учетные записи Google Voice/Talk"
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr "Входящие вызовы"
-
-msgid "Insert QoS Rules"
-msgstr "Вставить правила QoS"
-
-msgid "Makes Outgoing Calls"
-msgstr "Совершает исходящие вызовы"
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr "Нет"
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr "Outbound прокси сервер"
-
-msgid "Outgoing Calls"
-msgstr "Исходящие вызовы"
-
-msgid "PBX Main Page"
-msgstr "Главная страница АТС"
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "Password"
-msgstr "Пароль"
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr "Настройки порта устройств SIP"
-
-msgid "Providers Used for Outgoing Calls"
-msgstr "Провайдеры исходящих вызовов"
-
-msgid "QoS Settings"
-msgstr "Установки QoS"
-
-msgid "RTP Port Range End"
-msgstr "Конец диапазона портов RTP"
-
-msgid "RTP Port Range Start"
-msgstr "Начало диапазоно портов RTP"
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr "Принимает входящие вызовы"
-
-msgid "Remote Usage"
-msgstr "Удаленное использование"
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr "Учетные записи SIP"
-
-msgid "SIP Device/Softphone Accounts"
-msgstr "Учетные записи SIP устройства/программного телефона"
-
-msgid "SIP Provider Accounts"
-msgstr "Учетные записи SIP провайдера"
-
-msgid "SIP Realm (needed by some providers)"
-msgstr "SIP Realm (нужен для некоторых провайдеров)"
-
-msgid "SIP Server/Registrar"
-msgstr "SIP Сервер/Регистратор"
-
-msgid "SIP Server/Registrar Port"
-msgstr "Порт SIP Сервера/Регистратора"
-
-msgid "Server Setting"
-msgstr "Настройки сервера"
-
-msgid "Server Setting for Local SIP Devices"
-msgstr "Установки сервера для локальных SIP устройств"
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr "Настройки сервера для удаленных SIP устройств"
-
-msgid "Service Status"
-msgstr "Состояние сервиса"
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr "Черный список номеров (пробел между номерами для разделения)"
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-"Укажите отдельные номера. Нажмите enter, чтобы добавить больше номеров."
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-"Использовать эту учетную запись для исходящих вызовов в соответстии с "
-"наcтройками секции \"Маршрутизация вызовов\"."
-
-msgid "Use this account to make outgoing calls."
-msgstr "Использовать эту учетную запись для исходящих вызовов"
-
-msgid "User Accounts"
-msgstr "Учетные записи пользователя"
-
-msgid "User Agent String"
-msgstr "Строка агента пользователя"
-
-msgid "User Name"
-msgstr "Имя пользователя"
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr "Да"
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr "Здесь Вы можете указать имя для отображения вместо ID звонящего."
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-#~ msgid "Account Status"
-#~ msgstr "Статус учетной записи"
-
-#~ msgid "Account Status Message"
-#~ msgstr "Статус сообщение учетной записи"
-
-#~ msgid "Domain Name/Dynamic Domain Name"
-#~ msgstr "Имя домена/Динамическое имя домена"
-
-#~ msgid "Enable Incoming Calls (See Status, Message below)"
-#~ msgstr "Разрешить входящие вызовы (см. статус, сообщение ниже)"
-
-#~ msgid "Service Control and Connection Status"
-#~ msgstr "Управление сервисом и статус соединения"
diff --git a/po/ru/polipo.po b/po/ru/polipo.po
deleted file mode 100644
index f1d4968..0000000
--- a/po/ru/polipo.po
+++ /dev/null
@@ -1,237 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: polipo\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 17:51+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Advanced Settings"
-msgstr "Расширенные настройки"
-
-msgid "Allowed clients"
-msgstr "Разрешённые клиенты"
-
-msgid "Always use system DNS resolver"
-msgstr "Всегда использовать системный DNS-клиент"
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Поддерживается базовая HTTP-аутентификация. Введите имя пользователя и "
-"пароль в формате имя:пароль."
-
-msgid "Configuration"
-msgstr "Конфигурация"
-
-msgid "DNS and Query Settings"
-msgstr "Настройки DNS"
-
-msgid "DNS server address"
-msgstr "Адрес DNS-сервера"
-
-msgid "Delete cache files time"
-msgstr "Время удаления кэш-файлов"
-
-msgid "Disk cache location"
-msgstr "Местоположение кэша"
-
-msgid "Do not query IPv6"
-msgstr "Не запрашивать IPv6"
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-"Включите, если вы хотите, чтобы кэш (прокси) был общим для нескольких "
-"пользователей."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Размер первого PMM-сегмента (в байтах)"
-
-msgid "General Settings"
-msgstr "Общие настройки"
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Количество RAM, отведенное для кеша."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "Размер кэша в RAM (в байтах)"
-
-msgid "Listen address"
-msgstr "Адрес для входящих соединений"
-
-msgid "Listen port"
-msgstr "Порт для входящих соединений"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Директория, где Polipo хранит кэш-файлы. Рекомендуется использовать внешнее "
-"хранилище, так как размер кэша может увеличиваться. Оставьте пустым, чтобы "
-"отключить хранение кэша на диске."
-
-msgid "Log file location"
-msgstr "Местоположение файла журнала"
-
-msgid "Log to syslog"
-msgstr "Записывать сообщения в системный журнал"
-
-msgid "Logging and RAM"
-msgstr "Журналирование и RAM"
-
-msgid "Never use system DNS resolver"
-msgstr "Не использовать системный DNS-клиент"
-
-msgid "On-Disk Cache"
-msgstr "Кэширование на диске"
-
-msgid "PMM segments size (in bytes)"
-msgstr "Размер PMM-сегментов (в байтах)"
-
-msgid "Parent Proxy"
-msgstr "Родительский прокси"
-
-msgid "Parent proxy address"
-msgstr "Адрес родительского прокси"
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Адрес родительского прокси (в формате хост:порт), на который Polipo будет "
-"перенаправлять запросы."
-
-msgid "Parent proxy authentication"
-msgstr "Аутентификация родительского прокси"
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr "Состояние Polipo"
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipo - небольшой веб-прокси, использующий кэширование."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Poor Man's Multiplexing"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"Poor Man's Multiplexing (PMM) - это техника, которая позволяет запрашивать "
-"данные из нескольких источников. Таким образом, время отклика по HTTP-"
-"протоколу сокращается. ПРИМЕЧАНИЕ: некоторые сайты могут не работать с "
-"включенным PMM."
-
-msgid "Port on which Polipo will listen"
-msgstr "Порт, на котором Polipo будет ожидать входящие соединения"
-
-msgid "Proxy"
-msgstr "Прокси"
-
-msgid "Query DNS by hostname"
-msgstr "Запрашивать DNS, используя имя хоста"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-"Запрашивать DNS напрямую, использовать системный клиент в случае ошибки"
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-"Запрашивать DNS напрямую, использовать системный клиент для неизвестных "
-"хостов"
-
-msgid "Query DNS for IPv6"
-msgstr "Запрашивать DNS для IPv6"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr "Запрашивать IPv4 и IPv6, предпочитать IPv4"
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr "Запрашивать IPv4 и IPv6, предпочитать IPv6"
-
-msgid "Query only IPv6"
-msgstr "Запрашивать только IPv6"
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Установите адрес DNS-сервера для Polipo в случае, если он отличается от "
-"системного."
-
-msgid "Shared cache"
-msgstr "Общий кэш"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Размер первого PMM сегмента. Если не указано, то размер первого сегмента "
-"будет равен двум обычным."
-
-msgid "Size to which cached files should be truncated"
-msgstr "Размер, до которого будут сокращены файлы кэша"
-
-msgid "Status"
-msgstr "Состояние"
-
-msgid "Syslog facility"
-msgstr "Системный журнал"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"Интерфейс, на котором Polipo будет ожидать входящие соединения. Чтобы "
-"ожидать на всех интерфейсах, используйте 0.0.0.0 или :: (IPv6)."
-
-msgid "Time after which cached files will be deleted"
-msgstr "Интервал, после которого файлы кэша будут удалены"
-
-msgid "Time after which cached files will be truncated"
-msgstr "Интервал, после которого файлы кэша будут сокращены"
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr "Чтобы включить PMM, размер PMM сегмента должен быть установлен."
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Сократить размер файлов кэша (в байтах)"
-
-msgid "Truncate cache files time"
-msgstr "Время сокращения файлов кэша"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"Рекомендуется использовать внешнее хранилище, так как журнал часто "
-"обновляется и может значительно увеличиваться в размере."
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-"Если адрес для входящих соединений установлен в 0.0.0.0 или :: (IPv6), вам "
-"необходимо перечислить клиентов, которым разрешено подключаться. В таком "
-"случае формат - это IP-адрес или адрес подсети (192.168.1.123, "
-"192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-
-msgid "enable"
-msgstr "включить"
diff --git a/po/ru/qos.po b/po/ru/qos.po
deleted file mode 100644
index ba0592a..0000000
--- a/po/ru/qos.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: qos\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-08-15 12:02+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Calculate overhead"
-msgstr "Подсчитывать накладные расходы"
-
-msgid "Classification Rules"
-msgstr "Правила классификации"
-
-msgid "Classification group"
-msgstr "Классификация"
-
-msgid "Destination host"
-msgstr "Хост назначения"
-
-msgid "Downlink"
-msgstr "Нисходящий канал"
-
-msgid "Download speed (kbit/s)"
-msgstr "Скорость загрузки (кбит/с)"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "Half-duplex"
-msgstr "Полудуплекс"
-
-msgid "Interfaces"
-msgstr "Интерфейсы"
-
-msgid "Internet Connection"
-msgstr "Интернет-соединение"
-
-msgid "Number of bytes"
-msgstr "Количество байт"
-
-msgid "Ports"
-msgstr "Порты"
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "Качество обслуживания (QoS)"
-
-msgid "Service"
-msgstr "Служба"
-
-msgid "Source host"
-msgstr "Хост источника"
-
-msgid "Target"
-msgstr "Цель"
-
-msgid "Uplink"
-msgstr "Восходящий канал"
-
-msgid "Upload speed (kbit/s)"
-msgstr "Скорость отдачи (кбит/с)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Используя <abbr title=\"Quality of Service\">QoS</abbr>, вы можете "
-"приоритезаровать сетевой трафик по адресам, портам и сервисам."
-
-msgid "all"
-msgstr "все"
-
-# Typo in qosmini.lua, will be removed at a later date
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr "по умолчанию"
-
-msgid "express"
-msgstr "экспресс"
-
-msgid "low"
-msgstr "низкий"
-
-msgid "normal"
-msgstr "обычный"
-
-msgid "priority"
-msgstr "приоритетный"
-
-# Typo in qosmini.lua, will be removed at a later date
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/ru/radvd.po b/po/ru/radvd.po
deleted file mode 100644
index 37cc942..0000000
--- a/po/ru/radvd.po
+++ /dev/null
@@ -1,473 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: radvd\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-16 11:37+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "6to4 interface"
-msgstr "Интерфейс 6to4"
-
-msgid "Address"
-msgstr "Адрес"
-
-msgid "Addresses"
-msgstr "Адреса"
-
-msgid "Advanced"
-msgstr "Расширенные"
-
-msgid "Advertise Home Agent flag"
-msgstr "Извещать индикатор домашнего агента"
-
-msgid "Advertise router address"
-msgstr "Извещать адрес маршрутизатора"
-
-msgid "Advertised Domain Suffixes"
-msgstr "Извещаемые суффиксы домена"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-"Извещаемый IPv6 RDNSS. Если значение не задано, то будет использован текущий "
-"IPv6-адрес интерфейса."
-
-msgid "Advertised IPv6 prefixes"
-msgstr "Извещаемые IPv6-префиксы"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-"Извещаемые IPv6-префиксы. Если значение не задано, то будет использован "
-"текущий префикс интерфейса."
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr "Извещает возможности домашнего агента мобильного IPv6 (RFC3775)"
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-"Извещает возможности регистрации мобильного маршрутизатора (NEMO Basic)"
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-"Извещает предполагаемое время доступа к соседним узлам (мс). При значении 0 "
-"извещение не происходит."
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-"Извещает значение числа переходов по умолчанию для исходящих одноадресных "
-"пакетов. При значении 0 извещение не происходит."
-
-msgid "Advertises the default router preference"
-msgstr "Извещает параметры предпочтения маршрутизатора по умолчанию"
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-"Извещает указанный максимальный размер пакета (MTU) в сообщении RA. 0 "
-"выключает данную функцию"
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-"Извещает период (сек.), в течение которого адреса, созданные из префикса с "
-"помощью SLAAC, остаются предпочтительными."
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-"Извещает период (сек.), в течение которого префикс является действительным "
-"для определения включения соединения."
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-"Извещает период действия (сек.) маршрутизатора по умолчанию. 0 указывает на "
-"то, что узел не является маршрутизатором по умолчанию."
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-"Извещает период (сек.) предоставления служб домашнего агента мобильного IPv6"
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-"Извещает время ожидания (мс) между сообщениями Neighbor Solicitation, если "
-"RA включен. 0 отключает передачу извещений"
-
-msgid "Advertising"
-msgstr "Извещение"
-
-msgid "Autonomous"
-msgstr "Автономный"
-
-msgid "Clients"
-msgstr "Клиенты"
-
-msgid "Configuration flag"
-msgstr "Конфигурационный флаг"
-
-msgid "Current hop limit"
-msgstr "Текущее ограничение кол-ва прыжков"
-
-msgid "DNSSL"
-msgstr "DNSSL"
-
-msgid "DNSSL Configuration"
-msgstr "Конфигурация DNSSL"
-
-msgid "Default lifetime"
-msgstr "Срок действия по умолчанию"
-
-msgid "Default preference"
-msgstr "Приоритет по умолчанию"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "Enable advertisements"
-msgstr "Включить извещения"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "Включает извещения и запросы маршрутизатора"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr "Включает дополнительный протокол автоконфигурации (RFC2462)"
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr "Включает автоконфигурацию дополнительной информации (RFC2462)"
-
-msgid "General"
-msgstr "Общие"
-
-msgid "Home Agent information"
-msgstr "Информация о домашнем агенте"
-
-msgid "Home Agent lifetime"
-msgstr "Срок действия домашнего агента"
-
-msgid "Home Agent preference"
-msgstr "Приоритет домашнего агента"
-
-msgid "Include Home Agent Information in the RA"
-msgstr "Включить информацию о домашнем агенте в сообщения RA"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr "Включить интервал извещения мобильного IPv6 в сообщения RA"
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr "Включает адрес канального уровня исходящего интерфейса в сообщения RA"
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-"Указывает, что адрес интерфейса отправляется вместо префикса сети, как это "
-"требуется в мобильном IPv6"
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-"Указывает, что соединение не является широковещательным, и блокирует отсылку "
-"незапрошенных извещений"
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-"Указывае, что данный префикс может быть использован для автономной настройки "
-"адреса (RFC4862)"
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-"Указывает, что данный префикс может быть использован для определения "
-"включения соединения (RFC4861)"
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid "Interface Configuration"
-msgstr "Конфигурация интерфейса"
-
-msgid "Interface required"
-msgstr "Требуется интерфейс"
-
-msgid "Interfaces"
-msgstr "Интерфейсы"
-
-msgid "Lifetime"
-msgstr "Срок действия"
-
-msgid "Link MTU"
-msgstr "Максимальный размер пакета (MTU)"
-
-msgid "Managed flag"
-msgstr "Управляемый флаг"
-
-msgid "Max. interval"
-msgstr "Макс. интервал"
-
-msgid "Maximum advertisement interval"
-msgstr "Максимальный интервал извещения"
-
-msgid "Minimum advertisement delay"
-msgstr "Минимальная задержка извещения"
-
-msgid "Minimum advertisement interval"
-msgstr "Минимальный интервал извещения"
-
-msgid "Mobile IPv6"
-msgstr "Мобильный IPv6"
-
-msgid "Mobile IPv6 interval option"
-msgstr "Параметры интервала мобильного IPv6"
-
-msgid "Mobile IPv6 router registration"
-msgstr "Регистрация мобильного IPv6 маршрутизатора"
-
-msgid "Multicast"
-msgstr "Групповая рассылка"
-
-#, fuzzy
-msgid "On-link"
-msgstr "Соединение"
-
-msgid "On-link determination"
-msgstr "Определение включения соединения"
-
-msgid "Preference"
-msgstr "Приоритет"
-
-msgid "Preferred lifetime"
-msgstr "Предпочитаемый срок действия"
-
-msgid "Prefix"
-msgstr "Префикс"
-
-msgid "Prefix Configuration"
-msgstr "Конфигурация префикса"
-
-msgid "Prefixes"
-msgstr "Префиксы"
-
-msgid "RDNSS"
-msgstr "RDNSS"
-
-msgid "RDNSS Configuration"
-msgstr "Конфигурация RDNSS"
-
-msgid "Radvd"
-msgstr "Radvd"
-
-msgid "Radvd - DNSSL"
-msgstr "Radvd - DNSSL"
-
-msgid "Radvd - Interface %q"
-msgstr "Radvd - Интерфейс %q"
-
-msgid "Radvd - Prefix"
-msgstr "Radvd - Префикс"
-
-msgid "Radvd - RDNSS"
-msgstr "Radvd - RDNSS"
-
-msgid "Radvd - Route"
-msgstr "Radvd - Маршрут"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-"Radvd - это служба извещений маршрутизатора для IPv6. Она слушает запросы "
-"(Router Solicitations) и отсылает извещения (Router Advertisements), как "
-"описано в RFC 4861."
-
-msgid "Reachable time"
-msgstr "Период доступности"
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-"Связываться только с указанными клиентами. Оставьте пустым, чтобы "
-"использовать групповую рассылку"
-
-msgid "Retransmit timer"
-msgstr "Таймер ретрансляции"
-
-msgid "Route Configuration"
-msgstr "Настройка маршрута"
-
-msgid "Routes"
-msgstr "Маршруты"
-
-msgid "Source link-layer address"
-msgstr "Адрес источника (канальный уровень)"
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-"Устанавливает имя логического интерфейса для получения префикса 6to4. "
-"Публичный IPv4-адрес интерфейса комбинитуется с 2002::/3 и значением префикса"
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr "Указывает период жизни, связанный с маршрутом (сек.)"
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-"Устанавливает имя логического интерфейса, которому принадлежит данная секция"
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-"Указывает максимальную длительность использования записей DNSSL для "
-"разрешения имён."
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-"Указывает максимальную длительность использования записей RDNSS для "
-"разрешения имён."
-
-msgid "Specifies the preference associated with the default router"
-msgstr "Указывает приоритет, связанный с маршрутизатором по умолчанию"
-
-msgid "Suffix"
-msgstr "Суффикс"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Максимальный интервал времени между отсылкой групповых незапрашиваемых "
-"извещений маршрутизатора (сек.)"
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-"Минимальный интервал времени между отсылкой групповых извещений "
-"маршрутизатора с интерфейса (сек.)"
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-"Минимальный интервал времени между отсылкой групповых незапрашиваемых "
-"извещений маршрутизатора (сек.)"
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr "Предпочтение домашнего агента, отсылающего данное извещение RA"
-
-msgid "Timing"
-msgstr "Интервалы"
-
-msgid "Unicast only"
-msgstr "Только одноадресная передача"
-
-msgid "Valid lifetime"
-msgstr "Срок действия"
-
-msgid "Validity time"
-msgstr "Период действия"
-
-msgid "default"
-msgstr "по умолчанию"
-
-msgid "high"
-msgstr "высокий"
-
-msgid "low"
-msgstr "низкий"
-
-msgid "medium"
-msgstr "средний"
-
-msgid "no"
-msgstr "нет"
-
-msgid "yes"
-msgstr "да"
-
-#~ msgid "Advertised IPv6 prefix"
-#~ msgstr "Извещаемый IPv6 префикс"
-
-#~ msgid ""
-#~ "Advertised IPv6 prefix. If empty, the current interface prefix is used"
-#~ msgstr ""
-#~ "Извещаемый IPv6 префикс. Если значение не задано, то будет использован "
-#~ "текущий префикс интерфейса."
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that addresses generated from "
-#~ "the prefix via stateless address autoconfiguration remain preferred. Use "
-#~ "0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Извещает время в секундах, в течение которого адреса сгенерированные "
-#~ "автоматически из префикса остаются предпочтительными. 0 устанавливает "
-#~ "неограниченное время."
-
-#~ msgid ""
-#~ "Advertises the length of time in seconds that the prefix is valid for the "
-#~ "purpose of on-link determination. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Извещает время в секундах, в течение которого используется префикс для "
-#~ "определения включения соединения. 0 устанавливает неограниченное время."
-
-#~ msgid ""
-#~ "Indicates whether that RDNSS continues to be available to hosts even if "
-#~ "they moved to a different subnet"
-#~ msgstr ""
-#~ "Указывает остается ли RDNSS доступным для хостов даже в случае их "
-#~ "перемещения в другую подсеть"
-
-#~ msgid ""
-#~ "Specifies the lifetime associated with the route in seconds. Use 0 to "
-#~ "specify an infinite lifetime"
-#~ msgstr ""
-#~ "Устанавливает срок действия, связанный с маршрутом (секунды). Используйте "
-#~ "0 для установки бесконечного срока действия."
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the DNSSL entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Устанавливает максимальный срок действия DNSSL элементов для разрешения "
-#~ "имен.Используйте 0 для установки бесконечного срока действия"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the RDNSS entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr ""
-#~ "Устанавливает максимальный срок действия DNSSL элементов для разрешения "
-#~ "имен.Используйте 0 для установки бесконечного срока действия"
diff --git a/po/ru/rrdtool.po b/po/ru/rrdtool.po
deleted file mode 100644
index a63a850..0000000
--- a/po/ru/rrdtool.po
+++ /dev/null
@@ -1,360 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-03-26 15:36+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr "%H: Беспроводная связь - отношение сигнал/шум"
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr "дБм"
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr "Уровень шума"
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr "Мощность сигнала"
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr "%H: Беспроводная связь - качество сигнала"
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr "n"
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr "Качество сигнала"
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr "%H: Сквозное время ICMP"
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr "мс"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr "%di"
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr "%H: Межсетевой экран - обработанные пакеты"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr "пакет/c"
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr "\"%di\""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr "%H: Netlink - передача на %pi"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr "байт/c"
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr "Байт (%ds)"
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr "%H: Netlink - пакеты на %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr "пакет/c"
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr "Обработано (%ds)"
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr "Исключено (%ds)"
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr "Ошибок (%ds)"
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr "%H: Netlink - групповые пакеты на %pi"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr "пакет/с"
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr "Пакеты"
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr "%H: Netlink - коллизии на %pi"
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr "коллиз/сек"
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr "Коллизии"
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr "%H: Netlink - Ошибки на %pi"
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr "ошибок/c"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr "%di"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr "%di"
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr "%H: Процессы"
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr "Процессов/с"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr "%di"
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr "%H: Процесс %pi - время ЦП"
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr "Jiffies"
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr "система"
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr "пользователь"
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr "%H: Процесс %pi - потоков и процессов"
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr "Количество"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr "%ds"
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr "%H: Процесс %pi - ошибки страниц"
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr "Ошибки страниц"
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr "ошибки страниц"
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr "%H: Процесс %pi - размер виртуальной памяти"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr "Байт"
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr "виртуальная память"
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr "%H: Использование ЦП #%pi"
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr "%"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr "%di"
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr "%H: Передача на %di"
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr "байт/c"
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr "%H: Пакетов на %di"
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr "пакетов/c"
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr "%H: TCP соединений на порт %pi "
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr "соединений/с"
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr "%di"
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr "%H: Использование дискового пространства на %di"
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr "Байт"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr "%ds"
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr "%ds"
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr "%H: прерывания"
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr "запросов/с"
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr "IRQ %di"
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr "%H: Загрузка системы"
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr "Загрузка"
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr "1 мин."
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr "5 мин."
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr "15 мин."
diff --git a/po/ru/samba.po b/po/ru/samba.po
deleted file mode 100644
index 82906e3..0000000
--- a/po/ru/samba.po
+++ /dev/null
@@ -1,85 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: samba\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 13:48+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Allow guests"
-msgstr "Разрешить гостевой вход"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Разрешить пользователям получать доступ к их домашним директориям через сеть"
-
-msgid "Allowed users"
-msgstr "Разрешённые пользователи"
-
-msgid "Create mask"
-msgstr "Создать маску"
-
-msgid "Description"
-msgstr "Описание"
-
-msgid "Directory mask"
-msgstr "Маска директории"
-
-msgid "Edit Template"
-msgstr "Редактировать шаблон"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "Редактировать шаблон, используемый для генерации конфигурации samba."
-
-msgid "General Settings"
-msgstr "Общие настройки"
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid "Mask for new directories"
-msgstr "Маска для новых директорий"
-
-msgid "Mask for new files"
-msgstr "Маска для новых файлов"
-
-msgid "Name"
-msgstr "Имя"
-
-msgid "Network Shares"
-msgstr "Сетевые ресурсы"
-
-msgid "Path"
-msgstr "Путь"
-
-msgid "Read-only"
-msgstr "Только для чтения"
-
-msgid "Share home-directories"
-msgstr "Совместно использовать домашние директории"
-
-msgid "Shared Directories"
-msgstr "Совместно используемые директории"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Это содержимое файла '/etc/samba/smb.conf.template', из которого "
-"генерируется конфигурация samba. Значения, заключённые в символы \"|\", не "
-"должны быть изменены. Они будут автоматически заменены на значения из "
-"вкладки 'Общие настройки'."
-
-msgid "Workgroup"
-msgstr "Рабочая группа"
diff --git a/po/ru/splash.po b/po/ru/splash.po
deleted file mode 100644
index 96631a6..0000000
--- a/po/ru/splash.po
+++ /dev/null
@@ -1,362 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: splash\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-01-26 15:10+0200\n"
-"PO-Revision-Date: 2012-08-15 19:03+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Accept"
-msgstr "Принять"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-"Доступ к интернету возможен благодаря некоторым активистам данного проекта, "
-"которые делают общедоступным своё личное подключение к интернету. Эти "
-"немногие подключения разделяются среди всех пользователей. Это означает, что "
-"доступная пропускная способность ограничена и поэтому мы просим вас не "
-"делать следующего:"
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "Активные клиенты"
-
-msgid "Allowed hosts/subnets"
-msgstr "Разрешённые хосты/подсети"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"Ограничение полосы для клиентов активируется только при указанных лимитах "
-"нисходящего и восходящего каналов. Значение 0 полностью отключает "
-"ограничение. Клиенты из \"белого\" списка не имеют ограничений."
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-"Станьте активным участником данного сообщества и окажите содействие, "
-"запустив свой узел сети"
-
-msgid "Blacklist"
-msgstr "Чёрный список"
-
-msgid "Blocked"
-msgstr "Заблокирован"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr "Разрешённое время"
-
-msgid "Client-Splash"
-msgstr "Client-Splash"
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-"Client-Splash - это система аутентификации точек доступа для беспроводных "
-"ячеистых сетей."
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-"Скорость нисходящего канала для клиентов ограничена этим значением (КБ/c)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-"Клиенты, принявшие приглашение splash-экрана, могут использовать сеть данное "
-"количество часов."
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-"Скорость восходящего канала для клиентов ограничена этим значением (КБ/c)"
-
-msgid "Contact"
-msgstr "Связаться"
-
-msgid "Decline"
-msgstr "Отклонить"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr "Пожертвовать деньги на поддержку этого проекта."
-
-msgid "Download limit"
-msgstr "Лимит загрузки"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr "Зона межсетевого экрана"
-
-msgid "General"
-msgstr "Общие"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-"Перечисленные хосты и сети не получают приглашения splash-экрана, т.е. они "
-"всегда разрешены."
-
-msgid "IP Address"
-msgstr "IP-адрес"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-"Если вы используете собственное оборудование Wi-Fi, используйте каналы, "
-"отличающиеся от наших."
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr "Если вы используете эту сеть регулярно, мы просим вашей поддержки:"
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr "Перехватывать клиентский трафик на этом интерфейсе"
-
-msgid "Interfaces"
-msgstr "Интерфейсы"
-
-msgid "Interfaces that are used for Splash."
-msgstr "Интерфейсы, используемые для Splash."
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-"КБ/с (загрузка/отдача). Данное ограничение может быть снято при активном "
-"участии в этом проекте."
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr "MAC-адрес"
-
-msgid "MAC addresses in this list are blocked."
-msgstr "MAC-адреса из этого списка заблокированы."
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-"MAC-адреса клиентов из \"белого\" списка. Данные клиенты не имеют "
-"ограничений пропускной способности."
-
-msgid "Netmask"
-msgstr "Маска сети"
-
-msgid "Network"
-msgstr "Сеть"
-
-msgid "No clients connected"
-msgstr "Клиенты не подключены"
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-"Пожалуйста, обратите внимание, что мы не интернет-провайдер, а "
-"экспериментальная сеть сообщества."
-
-msgid "Policy"
-msgstr "Политика"
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr "Сохранить"
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr "Правила Splash интегрированы в зону этого межсетевого экрана"
-
-msgid "Splashtext"
-msgstr "Текст splash-экрана"
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr "Оставшееся время"
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-"Чтобы узнать причину, по которой вас заблокировали, или снова получить "
-"доступ, свяжитесь с владельцем данной точки доступа:"
-
-msgid "Traffic in/out"
-msgstr "Трафик вх/исх"
-
-msgid "Upload limit"
-msgstr "Лимит отдачи"
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr "Добро пожаловать"
-
-msgid "Whitelist"
-msgstr "\"Белый\" список"
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr "Теперь вы подключены к бесплатной беспроводной ячеистой сети"
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-"Здесь вы можете указать свой текст, который будет отображаться клиентам.<br /"
-">Возможно использовать следующие маркеры: ###COMMUNITY###, "
-"###COMMUNITY_URL###, ###CONTACTURL###, ###LEASETIME###, ###LIMIT### and "
-"###ACCEPT###."
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-"Доступ к этой сети был заблокирован, скорее всего, потому, что вы сделали "
-"что-то, что наши правила явно запрещают."
-
-msgid "Your bandwidth is limited to"
-msgstr "Ваша полоса пропускания ограничена значением"
-
-msgid "blacklisted"
-msgstr "в \"чёрном\" списке"
-
-msgid "expired"
-msgstr "истёк"
-
-msgid "optional when using host addresses"
-msgstr "опционально при использовании хост-адресов"
-
-msgid "perform any kind of illegal activities"
-msgstr "выполнять любые незаконные действия"
-
-msgid "splashed"
-msgstr "уже в splash"
-
-msgid "temporarily blocked"
-msgstr "временно заблокирован"
-
-msgid "unknown"
-msgstr "неизвестный"
-
-msgid "use filesharing applications on this network"
-msgstr "использование файлообменных приложений в этой сети"
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr "тратить пропускную способность на ненужные загрузки или потоки"
-
-msgid "whitelisted"
-msgstr "в \"белом\" списке"
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "Принимая эти правила, вы можете использовать данную сеть для"
-
-#~ msgid "Edit Splash text"
-#~ msgstr "Редактировать текст splash-экрана"
-
-#~ msgid "hour(s). After this time you need to accept these rules again."
-#~ msgstr ""
-#~ "час(ы). После указанного времени Вы должны вновь принять эти правила."
-
-# Здесь наверняка нужно склонить в другом падеже, надо смотреть по контексту
-#~ msgid "the owner of this access point."
-#~ msgstr "с владельцем этой точки доступа."
diff --git a/po/ru/statistics.po b/po/ru/statistics.po
deleted file mode 100644
index e0ec9d9..0000000
--- a/po/ru/statistics.po
+++ /dev/null
@@ -1,695 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: statistics\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-16 19:23+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Action (target)"
-msgstr "Действие (цель)"
-
-msgid "Add command for reading values"
-msgstr "Добавить команду для чтения значений"
-
-msgid "Add matching rule"
-msgstr "Добавить правило выборки"
-
-msgid "Add multiple hosts separated by space."
-msgstr "Добавить несколько хостов, разделённых пробелом"
-
-msgid "Add notification command"
-msgstr "Добавить команду уведомления"
-
-msgid "Base Directory"
-msgstr "Базовая директория"
-
-msgid "Basic monitoring"
-msgstr "Базовая статистика"
-
-msgid "CPU Plugin Configuration"
-msgstr "Конфигурация модуля CPU"
-
-msgid "CSV Output"
-msgstr "Вывод в CSV"
-
-msgid "CSV Plugin Configuration"
-msgstr "Конфигурация модуля CSV"
-
-msgid "Cache collected data for"
-msgstr "Кэшировать собранную статистику в течение"
-
-msgid "Cache flush interval"
-msgstr "Интервал сброса кэша"
-
-msgid "Chain"
-msgstr "Цепочка"
-
-msgid "CollectLinks"
-msgstr "Сбор информации о соединениях (CollectLinks)"
-
-msgid "CollectRoutes"
-msgstr "Сбор информации о маршрутах (CollectRoutes)"
-
-msgid "CollectTopology"
-msgstr "Сбор информации о топологии (CollectTopology)"
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Настройки Collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd - это сервис для сбора данных с разных модулей. На этой странице вы "
-"можете изменить настройки Сollectd."
-
-msgid "Conntrack"
-msgstr "Отслеживание подключения (Conntrack)"
-
-msgid "Conntrack Plugin Configuration"
-msgstr "Настройка плагина Conntrack"
-
-msgid "DF Plugin Configuration"
-msgstr "Конфигурация модуля DF"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Конфигурация модуля DNS"
-
-msgid "Data collection interval"
-msgstr "Интервал сбора данных"
-
-msgid "Datasets definition file"
-msgstr "Файл с определением набора данных"
-
-msgid "Destination ip range"
-msgstr "Диапазон IP-адресов назначения"
-
-msgid "Directory for collectd plugins"
-msgstr "Директория с модулями collectd"
-
-msgid "Directory for sub-configurations"
-msgstr "Директория конфигураций"
-
-msgid "Disk Plugin Configuration"
-msgstr "Конфигурация модуля Disk"
-
-msgid "Disk Space Usage"
-msgstr "Использование диска"
-
-msgid "Disk Usage"
-msgstr "Использование диска"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Показать за промежуток »"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Конфигурация модуля E-Mail"
-
-msgid "Email"
-msgstr "E-mail"
-
-msgid "Enable this plugin"
-msgstr "Включить этот модуль"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Конфигурация модуля Exec"
-
-#, fuzzy
-msgid "Filter class monitoring"
-msgstr "Мониторинг классов фильтров"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr "Сбросить кэш после"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "Перенаправление между локальным адресом и адресом сервера"
-
-msgid "Graphs"
-msgstr "Графики"
-
-msgid "Group"
-msgstr "Группа"
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Здесь вы можете определить внешние команды, которые будут выполнены для "
-"чтения определённых значений. Значения будут считаны со стандартного вывода."
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Здесь вы можете определить внешние команды, которые будут выполнены, когда "
-"значения достигнут определённого порога. Значения будут переданы на "
-"стандартный ввод вызванным программам."
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Здесь вы можете указать различные критерии, по которым будут выбраны правила "
-"для сбора статистики."
-
-msgid "Host"
-msgstr "Хост"
-
-msgid "Hostname"
-msgstr "Имя хоста"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr "IP-адрес или имя хоста, с которых получать текстовый вывод"
-
-msgid "IRQ Plugin Configuration"
-msgstr "Конфигурация модуля IRQ"
-
-msgid "Ignore source addresses"
-msgstr "Игнорировать адреса-источники"
-
-msgid "Incoming interface"
-msgstr "Входящий интерфейс"
-
-msgid "Interface Plugin Configuration"
-msgstr "Конфигурация модуля Interface"
-
-msgid "Interfaces"
-msgstr "Интерфейсы"
-
-msgid "Interrupts"
-msgstr "Прерывания"
-
-msgid "Interval for pings"
-msgstr "Интервал для ping-запросов"
-
-msgid "Iptables Plugin Configuration"
-msgstr "Конфигурация модуля Iptables"
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-"Оставьте невыбранным для автоматического определения интерфейсов для "
-"мониторинга."
-
-msgid "Listen host"
-msgstr "Хост"
-
-msgid "Listen port"
-msgstr "Порт"
-
-msgid "Listener interfaces"
-msgstr "Использовать интерфейсы"
-
-msgid "Load Plugin Configuration"
-msgstr "Конфигурация модуля Load"
-
-msgid "Maximum allowed connections"
-msgstr "Максимальное число соединений"
-
-msgid "Memory"
-msgstr "Память"
-
-msgid "Memory Plugin Configuration"
-msgstr "Конфигурация модуля Memory"
-
-msgid "Monitor all except specified"
-msgstr "Собирать статистику со всех, кроме указанных"
-
-msgid "Monitor all local listen ports"
-msgstr "Собирать статистику со всех портов, ожидающих соединения"
-
-msgid "Monitor devices"
-msgstr "Собирать статистику с устройств"
-
-msgid "Monitor disks and partitions"
-msgstr "Собирать статистику с дисков и разделов"
-
-msgid "Monitor filesystem types"
-msgstr "Собирать статистику с файловых систем"
-
-msgid "Monitor hosts"
-msgstr "Собирать статистику с хостов"
-
-msgid "Monitor interfaces"
-msgstr "Собирать статистику с интерфейсов"
-
-msgid "Monitor interrupts"
-msgstr "Собирать статистику по прерываниям"
-
-msgid "Monitor local ports"
-msgstr "Собирать статистику с локальных портов"
-
-msgid "Monitor mount points"
-msgstr "Собирать статистику с точек монтирования"
-
-msgid "Monitor processes"
-msgstr "Собирать статистику с процессов"
-
-msgid "Monitor remote ports"
-msgstr "Собирать статистику с удалённых портов"
-
-msgid "Name of the rule"
-msgstr "Название правила"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Конфигурация модуля Netlink"
-
-msgid "Network"
-msgstr "Network"
-
-msgid "Network Plugin Configuration"
-msgstr "Конфигурация модуля Network"
-
-msgid "Network plugins"
-msgstr "Сетевые модули"
-
-msgid "Network protocol"
-msgstr "Сетевой протокол"
-
-msgid "Number of threads for data collection"
-msgstr "Количество потоков сбора данных"
-
-msgid "OLSRd"
-msgstr "OLSRd"
-
-msgid "OLSRd Plugin Configuration"
-msgstr "Настройка плагина OLSRd"
-
-msgid "Only create average RRAs"
-msgstr "Создавать только средние RRA"
-
-msgid "Options"
-msgstr "Опции"
-
-msgid "Outgoing interface"
-msgstr "Исходящий интерфейс"
-
-msgid "Output plugins"
-msgstr "Модули вывода"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Конфигурация модуля Ping"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Processes"
-msgstr "Процессы"
-
-msgid "Processes Plugin Configuration"
-msgstr "Конфигурация модуля Processes"
-
-msgid "Processes to monitor separated by space"
-msgstr "Процессы для мониторинга (разделённые пробелом)"
-
-msgid "Processor"
-msgstr "Processor"
-
-msgid "Qdisc monitoring"
-msgstr "Мониторинг Qdisc"
-
-#, fuzzy
-msgid "RRD XFiles Factor"
-msgstr "Фактор XFiles RRD"
-
-#, fuzzy
-msgid "RRD heart beat interval"
-msgstr "Интервал heartbeat RRD"
-
-msgid "RRD step interval"
-msgstr "Интервал шага RRD"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Конфигурация модуля RRDTool"
-
-msgid "Rows per RRA"
-msgstr "Количество строк в RRA"
-
-msgid "Script"
-msgstr "Скрипт"
-
-msgid "Seconds"
-msgstr "Секунды"
-
-msgid "Server host"
-msgstr "Хост сервера"
-
-msgid "Server port"
-msgstr "Порт сервера"
-
-msgid "Shaping class monitoring"
-msgstr "Мониторинг классов шейпинга"
-
-msgid "Socket file"
-msgstr "Файл сокета"
-
-msgid "Socket group"
-msgstr "Группа сокета"
-
-msgid "Socket permissions"
-msgstr "Права доступа сокета"
-
-msgid "Source ip range"
-msgstr "Диапазон IP-адресов источника"
-
-msgid "Specifies what information to collect about links."
-msgstr "Указывает, какую информацию собирать о соединениях."
-
-msgid "Specifies what information to collect about routes."
-msgstr "Указывает, какую информацию собирать о маршрутах."
-
-msgid "Specifies what information to collect about the global topology."
-msgstr "Указывает, какую информацию собирать о глобальной топологии."
-
-msgid "Statistics"
-msgstr "Статистика"
-
-msgid "Storage directory"
-msgstr "Директория с данными"
-
-msgid "Storage directory for the csv files"
-msgstr "Директория для CSV-файлов"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Хранить данные в виде коэффициентов вместо абсолютных значений"
-
-msgid "Stored timespans"
-msgstr "Сохранённые промежутки времени"
-
-msgid "System Load"
-msgstr "Загрузка системы"
-
-msgid "System plugins"
-msgstr "Системные модули"
-
-msgid "TCP Connections"
-msgstr "TCPConns"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Конфигурация модуля TCPConns"
-
-msgid "TTL for network packets"
-msgstr "TTL для сетевых пакетов"
-
-msgid "TTL for ping packets"
-msgstr "TTL для ping-пакетов"
-
-msgid "Table"
-msgstr "Таблица"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-"Модуль OLSRd считывает информацию о узловых сетях с модуля txtinfo OLSRd."
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-"Модуль Conntrack собирает статистику о количестве отслеживаемых соединений."
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr "Модуль CPU собирает статистику по использованию процессора."
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"Модуль CSV позволяет сохранить статистику в формате CSV для последующей "
-"обработки."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"Модуль DF собирает статистику о доступном пространстве на различных "
-"устройствах, точках монтирования или файловых системах."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"Модуль Disk собирает подробную статистику для выбранных разделов или дисков."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-"Модуль DNS собирает подробную статистику о DNS-трафике на выбранных "
-"интерфейсах."
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"Модуль E-mail создает Unix-сокет, который может быть использован для "
-"передачи статистики эл. почты работающему сервису collectd. В основном, этот "
-"модуль предназначен для использования вместе с Mail::SpamAssasin::Plugin::"
-"Collectd."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"Модуль Exec выполняет внешнюю команду в случае, когда определённые значения "
-"достигают заданного порога."
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr "Модуль Interface собирает статистику на выбранных сетевых интерфейсах."
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"Модуль Iptables собирает статистику с определённых правил межсетевого экрана."
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"Модуль IRQ собирает статистику по выбранным прерываниям. Если ни одно "
-"прерывание не выбрано, сбор статистики будет проводиться по всем прерываниям."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-"Модуль Iwinfo собирает статистику о беспроводном сигнале, шуме и качестве."
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "Модуль Load собирает статистику о загрузке системы."
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr "Модуль Memory собирает статистику об использовании памяти."
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"Модуль Netlink собирает расширенную статистику с выбранных интерфейсов."
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"Модуль Network предоставляет возможность сетевого обмена данными между "
-"разными сервисами collectd. Collectd может работать в режиме сервера или "
-"клиента. В режиме клиента, локальная статистика передается collectd-серверу, "
-"в режиме сервера collectd собирает статистику с удалённых хостов."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"Модуль Ping посылает ICMP-запросы выбранным хостам и измеряет время отклика."
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"Модуль Processes собирает статистику для выбранных процессов об "
-"использовании ЦП, ошибках обращения к страницам памяти, использовании памяти."
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"Модуль Rrdtool сохраняет статистику в формате rrd для последующего "
-"построения диаграмм.<br /><br /><strong>Внимание: установка неверных "
-"параметров может привезти к высокому потреблению памяти во временной "
-"директории. Это, в свою очередь, может привести к отказу устройства!</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"Данная статистика основана на программе <a href=\"http://collectd.org/index."
-"shtml\">Collectd</a> и использует <a href=\"http://oss.oetiker.ch/rrdtool/"
-"\">RRD Tool</a> для построения диаграмм."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"Модуль TCPConns собирает информацию об открытых TCP-соединениях на выбранных "
-"портах."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"Модуль UnixSock создает Unix-сокет, который может быть использован для "
-"получения статистики от работающего сервиса collectd."
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Эта секция определяет интерфейсы, на которых collectd будет обрабатывать "
-"входящие соединения."
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-"Эта секция определяет серверы, на которые будет передаваться локальная "
-"статистика."
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Пытаться определять имя хоста"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Конфигурация модуля UnixSock"
-
-msgid "Used PID file"
-msgstr "Используемый PID-файл"
-
-msgid "User"
-msgstr "Пользователь"
-
-msgid "Verbose monitoring"
-msgstr "Расширенная статистика"
-
-msgid "Wireless"
-msgstr "Wireless"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr "Конфигурация модуля Iwinfo"
-
-msgid "e.g. br-ff"
-msgstr "напр. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "напр. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "напр. reject-with tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "не более 16 символов"
-
-msgid "reduces rrd size"
-msgstr "уменьшает размер rrd"
-
-#, fuzzy
-msgid "seconds; multiple separated by space"
-msgstr "секунды; разделяются пробелом"
-
-msgid "server interfaces"
-msgstr "интерфейсы сервера"
-
-#~ msgid "Installed network plugins:"
-#~ msgstr "Установленные сетевые модули:"
-
-#~ msgid "Installed output plugins:"
-#~ msgstr "Установленные модули вывода:"
-
-#~ msgid ""
-#~ "Network plugins are used to collect information about open tcp "
-#~ "connections, interface traffic, iptables rules etc."
-#~ msgstr ""
-#~ "Сетевые модули используются для сбора информации об открытых "
-#~ "TCP-соединениях, трафике, правилах iptables и т.п."
-
-#~ msgid ""
-#~ "Output plugins provide different possibilities to store collected data. "
-#~ "It is possible to enable multiple plugin at one, for example to store "
-#~ "collected data in rrd databases and to transmit the data over the network "
-#~ "to other collectd instances."
-#~ msgstr ""
-#~ "Модули вывода обеспечивают различные варианты сохранения собранных данных. "
-#~ "Можно включить несколько модулей, например, чтобы сохранить собранные данные "
-#~ "в базе данных RRD и передать их по сети другим инстанциям collectd."
-
-#~ msgid ""
-#~ "System plugins collecting values about system state and ressource usage "
-#~ "on the device.:"
-#~ msgstr ""
-#~ "Системные модули, собирающие данные о состоянии системы и использовании "
-#~ "ресурсов устройства:"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr "Модуль Wireless собирает статистику о силе, шуме и качестве сигнала."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Конфигурация модуля Wireless"
diff --git a/po/ru/tinyproxy.po b/po/ru/tinyproxy.po
deleted file mode 100644
index f9a3c23..0000000
--- a/po/ru/tinyproxy.po
+++ /dev/null
@@ -1,294 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: tinyproxy\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 20:24+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-"<em>Через прокси</em> перенаправляет запросы на заданные узлы через "
-"указанный прокси, <em>Отклонять доступ</em> отключает использование прокси "
-"для всех узлов"
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-"Добавляет HTTP-заголовок \"X-Tinyproxy\" с IP-адресом клиента ко всем "
-"перенаправленным запросам"
-
-msgid "Allowed clients"
-msgstr "Разрешённые клиенты"
-
-msgid "Allowed connect ports"
-msgstr "Разрешённые порты подключения"
-
-msgid "Bind address"
-msgstr "Адрес привязки"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"Разрешить использование расширенных регулярных выражений для фильтрации. По "
-"умолчанию, используются базовые POSIX-выражения"
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-"По умолчанию, строки фильтрации регистро-независимы. Включите эту опцию, "
-"чтобы сделать сравнение регистро-зависимым"
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-"По умолчанию, фильтрация выполняется на основе имени домена. Включите эту "
-"опцию, чтобы фильтровать при помощи URL"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"По умолчанию, фильтрация работает в режиме чёрного списка. Включите эту "
-"опцию, чтобы разрешить только опредёленные URL или доменные имена"
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-"Может быть IP-адресом, диапазоном, именем домена или \".\" для любого хоста "
-"без домена"
-
-msgid "Configuration"
-msgstr "Конфигурация"
-
-msgid "Connection timeout"
-msgstr "Таймаут соединения"
-
-msgid "Default deny"
-msgstr "Запретить по умолчанию"
-
-msgid "Enable Tinyproxy server"
-msgstr "Включить сервер Tinyproxy"
-
-msgid "Error page"
-msgstr "Страница ошибки"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr "Ошибка получения статистики по URL:"
-
-msgid "Filter by RegExp"
-msgstr "Фильтровать при помощи регулярных выражений"
-
-msgid "Filter by URLs"
-msgstr "Фильтровать по URL"
-
-msgid "Filter case-sensitive"
-msgstr "Фильтровать с учётом регистра"
-
-msgid "Filter file"
-msgstr "Файл фильтрации"
-
-msgid "Filtering and ACLs"
-msgstr "Фильтрация и ACL"
-
-msgid "General settings"
-msgstr "Общие настройки"
-
-msgid "Group"
-msgstr "Группа"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr "HTML-шаблон для статистики хостов"
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "HTML-шаблон для вывода ошибок HTTP"
-
-msgid "Header whitelist"
-msgstr "Белый список заголовков"
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-"Список или диапазон IP-адресов, которым разрешено использовать прокси-сервер"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-"Список разрешённых портов для метода CONNECT. Значение \"0\" разрешает все "
-"порты"
-
-msgid "Listen address"
-msgstr "Адрес"
-
-msgid "Listen port"
-msgstr "Порт"
-
-msgid "Log file"
-msgstr "Файл журналирования"
-
-msgid "Log file to use for dumping messages"
-msgstr "Файл для записи сообщений"
-
-msgid "Log level"
-msgstr "Уровень журналирования"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr "Уровень подробности журналирования процесса Tinyproxy"
-
-msgid "Max. clients"
-msgstr "Макс. кол-во клиентов"
-
-msgid "Max. requests per server"
-msgstr "Макс. кол-во запросов на сервер"
-
-msgid "Max. spare servers"
-msgstr "Макс. кол-во серверов ожидания"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr "Максимально допустимое количество одновременно подключенных клиентов"
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-"Максимально допустимое количество запросов на процесс. Если превышено, "
-"процесс будет перезапущен. Ноль отключает данное ограничение."
-
-msgid "Maximum number of prepared idle processes"
-msgstr "Максимальное количество готовых к обработке процессов"
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-"Максимальное количество секунд, в течение которых неактивное соединение "
-"остаётся открытым"
-
-msgid "Min. spare servers"
-msgstr "Мин. кол-во серверов ожидания"
-
-msgid "Minimum number of prepared idle processes"
-msgstr "Минимальное количество готовых к обработке процессов"
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr "Количество готовых к обработке процессов при старте Tinyproxy"
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr "Файл с URL или доменами для фильтрации. Одна запись на строку"
-
-msgid "Policy"
-msgstr "Политика"
-
-msgid "Privacy settings"
-msgstr "Настройки конфиденциальности"
-
-msgid "Reject access"
-msgstr "Отклонять доступ"
-
-msgid "Server Settings"
-msgstr "Настройки сервера"
-
-msgid "Server limits"
-msgstr "Ограничения сервера"
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-"Определяет HTTP-заголовки, которым разрешено проходить через прокси. "
-"Оставьте пустым, чтобы не фильтровать заголовки"
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr "Определяет порт HTTP, на котором Tinyproxy ожидает запросы"
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-"Определяет имя хоста Tinyproxy, которое будет использовано в HTTP-заголовке "
-"Via"
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-"Определяет адрес, к которому привязывается Tinyproxy для отправки исходящих "
-"запросов"
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr "Определяет адрес, на котором Tinyproxy ожидает запросы"
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr "Определяет имя группы, в которой работает Tinyproxy"
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-"Определяет прокси восходящего канала для доступа к хосту в формате "
-"<code>адрес:порт</code>"
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr "Определяет пользователя, от имени которого работает Tinyproxy"
-
-msgid "Start spare servers"
-msgstr "Запустить указанное количество готовых к обработке процессов"
-
-msgid "Statistics page"
-msgstr "Страница статистики"
-
-msgid "Status"
-msgstr "Состояние"
-
-msgid "Target host"
-msgstr "Хост назначения"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr "Состояние Tinyproxy"
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy - быстрый HTTP(S)-прокси, не использующий кэш"
-
-msgid "Upstream Proxies"
-msgstr "Прокси для исходящего трафика"
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-"Прокси для исходящего трафика при обращении к определённым IP-адресам или "
-"доменам."
-
-msgid "Use syslog"
-msgstr "Использовать системный журнал"
-
-msgid "User"
-msgstr "Пользователь"
-
-msgid "Via hostname"
-msgstr "Имя хоста Via"
-
-msgid "Via proxy"
-msgstr "Через прокси"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr "Записывать сообщения журнала в системный журнал вместо файла"
-
-msgid "X-Tinyproxy header"
-msgstr "Заголовок X-Tinyproxy"
diff --git a/po/ru/transmission.po b/po/ru/transmission.po
deleted file mode 100644
index fac9510..0000000
--- a/po/ru/transmission.po
+++ /dev/null
@@ -1,306 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: transmission\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 17:35+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Alternative download speed"
-msgstr "Альтернативная скорость загрузки"
-
-msgid "Alternative speed enabled"
-msgstr "Альтернативная скорость включена"
-
-msgid "Alternative speed time begin"
-msgstr "Время начала альтернативной скорости"
-
-msgid "Alternative speed time day"
-msgstr "День альтернативной скорости"
-
-msgid "Alternative speed time end"
-msgstr "Время окончания альтернативной скорости"
-
-msgid "Alternative speed timing enabled"
-msgstr "Расписание альтернативной скорости включено"
-
-msgid "Alternative upload speed"
-msgstr "Альтернативная скорость отдачи"
-
-msgid "Automatically start added torrents"
-msgstr "Автоматически запускать добавленные торренты"
-
-msgid "Bandwidth settings"
-msgstr "Настройки скорости"
-
-msgid "Binding address IPv4"
-msgstr "Привязанный адрес IPv4"
-
-msgid "Binding address IPv6"
-msgstr "Привязанный адрес IPv6"
-
-msgid "Block list enabled"
-msgstr "Список блокировок включен"
-
-msgid "Blocklist URL"
-msgstr "URL списка блокировок"
-
-msgid "Blocklists"
-msgstr "Списки блокировок"
-
-msgid "Cache size in MB"
-msgstr "Размер кэша (МБ)"
-
-msgid "Config file directory"
-msgstr "Папка файла конфигурации"
-
-msgid "DHT enabled"
-msgstr "DHT включен"
-
-msgid "Debug"
-msgstr "Отладка"
-
-msgid "Download directory"
-msgstr "Папка для загрузок"
-
-msgid "Download queue enabled"
-msgstr "Очередь загрузок включена"
-
-msgid "Download queue size"
-msgstr "Размер очереди загрузок"
-
-msgid "Enable watch directory"
-msgstr "Включить папку поиска"
-
-msgid "Enabled"
-msgstr "Включено"
-
-msgid "Encryption"
-msgstr "Шифрование"
-
-msgid "Error"
-msgstr "Ошибка"
-
-msgid "Fast"
-msgstr "Быстрый"
-
-msgid "Files and Locations"
-msgstr "Файлы и пути"
-
-msgid "Forced"
-msgstr "Принудительно"
-
-msgid "Full"
-msgstr "Полный"
-
-msgid "Global peer limit"
-msgstr "Глобальный лимит пиров"
-
-msgid "Global settings"
-msgstr "Общие настройки"
-
-msgid "Idle seeding limit"
-msgstr "Ограничение времени сидирования"
-
-msgid "Idle seeding limit enabled"
-msgstr "Ограничение времени сидирования включено"
-
-msgid "Incomplete directory"
-msgstr "Папка для не полностью загруженых файлов"
-
-msgid "Incomplete directory enabled"
-msgstr "Папка для не полностью загруженых файлов включена"
-
-msgid "Info"
-msgstr "Информация"
-
-msgid "LPD enabled"
-msgstr "LPD включено"
-
-#, fuzzy
-msgid "Lazy bitfield enabled"
-msgstr "Lazy bitfield включен"
-
-msgid "Message level"
-msgstr "Уровень сообщений"
-
-msgid "Miscellaneous"
-msgstr "Прочее"
-
-msgid "None"
-msgstr "Отсутствует"
-
-#, fuzzy
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-"Номер/битовое поле. Начните с 0, затем для каждого дня, в который вы хотите "
-"включить планировщик, добавьте значение. Для воскресенья - 1, понедельника - "
-"2, вторника - 4, среды - 8, четверга - 16, пятницы - 32, субботы - 64."
-
-msgid "Off"
-msgstr "Выключено"
-
-msgid "Open Web Interface"
-msgstr "Открыть веб-интерфейс"
-
-msgid "PEX enabled"
-msgstr "PEX включен"
-
-msgid "Peer Port settings"
-msgstr "Настройки порта пира"
-
-msgid "Peer congestion algorithm"
-msgstr "Алгоритм перегрузки пиров"
-
-msgid "Peer limit per torrent"
-msgstr "Ограничение пиров на торрент"
-
-msgid "Peer port"
-msgstr "Порт пира"
-
-msgid "Peer port random high"
-msgstr "Наибольший случайный порт пира"
-
-msgid "Peer port random low"
-msgstr "Наименьший случайный порт пира"
-
-msgid "Peer port random on start"
-msgstr "Случайный порт пира при запуске"
-
-msgid "Peer settings"
-msgstr "Настройки пира"
-
-msgid "Peer socket tos"
-msgstr "Значение ToS сокета пира"
-
-msgid "Port forwarding enabled"
-msgstr "Перенаправление портов включено"
-
-msgid "Preferred"
-msgstr "Предпочитаемо"
-
-msgid "Prefetch enabled"
-msgstr "Предвыборка включена"
-
-#, fuzzy
-msgid "Queue stalled enabled"
-msgstr "Приостановка очереди включена"
-
-#, fuzzy
-msgid "Queue stalled minutes"
-msgstr "Приостановка очереди (мин.)"
-
-msgid "Queueing"
-msgstr "Обслуживание"
-
-msgid "RPC URL"
-msgstr "URL RPC"
-
-msgid "RPC authentication required"
-msgstr "Аутентификация RPC"
-
-msgid "RPC bind address"
-msgstr "RPC-адрес"
-
-msgid "RPC enabled"
-msgstr "RPC включен"
-
-msgid "RPC password"
-msgstr "Пароль RPC"
-
-msgid "RPC port"
-msgstr "Порт RPC"
-
-msgid "RPC settings"
-msgstr "Настройки RPC"
-
-msgid "RPC username"
-msgstr "Имя пользователя RPC"
-
-msgid "RPC whitelist"
-msgstr "\"Белый\" список RPC"
-
-msgid "RPC whitelist enabled"
-msgstr "\"Белый\" список RPC включен"
-
-msgid "Ratio limit"
-msgstr "Коэффициент отдачи"
-
-msgid "Ratio limit enabled"
-msgstr "Коэффициент отдачи включен"
-
-msgid "Rename partial files"
-msgstr "Переименовывать незавершённые файлы"
-
-msgid "Run daemon as user"
-msgstr "Запустить демон от пользователя"
-
-msgid "Scheduling"
-msgstr "Планирование"
-
-msgid "Scrape paused torrents enabled"
-msgstr "Производить scrape-запросы у приостановленных торрентов"
-
-msgid "Script torrent done enabled"
-msgstr "Запуск скрипта после загрузки торрента включён"
-
-msgid "Script torrent done filename"
-msgstr "Скрипт завершения загрузки"
-
-msgid "Seed queue enabled"
-msgstr "Очередь сидов включена"
-
-msgid "Seed queue size"
-msgstr "Размер очереди сидирования"
-
-msgid "Speed limit down"
-msgstr "Лимит скорости загрузки"
-
-msgid "Speed limit down enabled"
-msgstr "Лимит скорости загрузки включен"
-
-msgid "Speed limit up"
-msgstr "Лимит скорости отдачи"
-
-msgid "Speed limit up enabled"
-msgstr "Лимит скорости отдачи включен"
-
-msgid "Transmission"
-msgstr "Transmission"
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-"Transmission - простой bittorrent-клиент. Здесь Вы можете настроить "
-"параметры."
-
-msgid "Trash original torrent files"
-msgstr "Удалить торрент-файлы"
-
-msgid "Upload slots per torrent"
-msgstr "Кол-во слотов отдачи на торрент"
-
-msgid "Watch directory"
-msgstr "Папка поиска"
-
-msgid "in minutes from midnight"
-msgstr "в минутах от полуночи"
-
-msgid "preallocation"
-msgstr "предраспределение"
-
-msgid "uTP enabled"
-msgstr "uTP включен"
diff --git a/po/ru/upnp.po b/po/ru/upnp.po
deleted file mode 100644
index 6174930..0000000
--- a/po/ru/upnp.po
+++ /dev/null
@@ -1,158 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: upnp\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 15:20+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-"Список доступа определяет, какие внешние порты могут быть перенаправлены на "
-"внутренние адреса и порты"
-
-msgid "Action"
-msgstr "Действие"
-
-msgid "Active UPnP Redirects"
-msgstr "Активные UPnP-переадресации"
-
-msgid "Advanced Settings"
-msgstr "Расширенные настройки"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "Разрешить перенаправление только для запрашивающих IP-адресов"
-
-msgid "Announced model number"
-msgstr "Номер модели"
-
-msgid "Announced serial number"
-msgstr "Серийный номер"
-
-msgid "Clean rules interval"
-msgstr "Интервал очистки правил"
-
-msgid "Clean rules threshold"
-msgstr "Порог очистки правил"
-
-msgid "Client Address"
-msgstr "Адрес клиента"
-
-msgid "Client Port"
-msgstr "Порт клиента"
-
-msgid "Collecting data..."
-msgstr "Сбор данных..."
-
-msgid "Comment"
-msgstr "Комментарий"
-
-msgid "Delete Redirect"
-msgstr "Удалить переадресацию"
-
-msgid "Device UUID"
-msgstr "UUID устройства"
-
-msgid "Downlink"
-msgstr "Нисходящий канал"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "Включить NAT-PMP"
-
-msgid "Enable UPnP functionality"
-msgstr "Включить UPnP"
-
-msgid "Enable additional logging"
-msgstr "Включить дополнительное журналирование"
-
-msgid "Enable secure mode"
-msgstr "Использовать защищённый режим"
-
-msgid "External Port"
-msgstr "Внешний порт"
-
-msgid "External ports"
-msgstr "Внешние порты"
-
-msgid "General Settings"
-msgstr "Общие настройки"
-
-msgid "Internal addresses"
-msgstr "Внутренние адреса"
-
-msgid "Internal ports"
-msgstr "Внутренние порты"
-
-msgid "MiniUPnP ACLs"
-msgstr "Список доступа MiniUPnP"
-
-msgid "MiniUPnP settings"
-msgstr "Настройки MiniUPnP"
-
-msgid "Notify interval"
-msgstr "Интервал уведомления"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Presentation URL"
-msgstr "URL представления"
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "Добавлять дополнительную отладочную информацию в системный журнал"
-
-msgid "Report system instead of daemon uptime"
-msgstr "Сообщать время работы системы вместо сервиса"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "Запустить службы UPnP и NAT-PMP"
-
-msgid "There are no active redirects."
-msgstr "Активные переадресации отсутствуют."
-
-msgid "UPNP"
-msgstr "UPnP"
-
-# Used in upnpmini.lua, which is marked broken, thus can be removed
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP позволяет клиентам в локальной сети автоматически настраивать "
-"маршрутизатор."
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPnP позволяет клиентам в локальной сети автоматически настраивать "
-"маршрутизатор."
-
-msgid "UPnP lease file"
-msgstr "Файл аренды UPnP"
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Восходящий канал"
-
-msgid "Value in KByte/s, informational only"
-msgstr "Значение в КБ/с, только для информации"
-
-msgid "enable"
-msgstr "включить"
diff --git a/po/ru/ushare.po b/po/ru/ushare.po
deleted file mode 100644
index ac08e94..0000000
--- a/po/ru/ushare.po
+++ /dev/null
@@ -1,54 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: ushare\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-08-15 11:29+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Content directories"
-msgstr "Директории с содержимым"
-
-msgid "Disable telnet console"
-msgstr "Выключить telnet-консоль"
-
-msgid "Disable webinterface"
-msgstr "Выключить веб-интерфейс"
-
-msgid "Enable"
-msgstr "Включить"
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid "Options"
-msgstr "Опции"
-
-msgid "Servername"
-msgstr "Имя сервера"
-
-msgid "Settings"
-msgstr "Настройки"
-
-msgid "Username"
-msgstr "Имя пользователя"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"uShare - это UPnP (TM) A/V DLNA медиа-сервер, который предоставляет "
-"мультимедийным устройствам информацию о доступных медиа-файлах."
diff --git a/po/ru/uvc_streamer.po b/po/ru/uvc_streamer.po
deleted file mode 100644
index c9e859c..0000000
--- a/po/ru/uvc_streamer.po
+++ /dev/null
@@ -1,46 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: uvc_streamer\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 11:46+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Количество кадров в секунду"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Разрешение"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Настройки"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Потоковое вещание с веб-камеры"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Настройте вашу Linux-UVC-совместимую веб-камеру. Перейдите на страницу <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/ru/vnstat.po b/po/ru/vnstat.po
deleted file mode 100644
index 5254ca1..0000000
--- a/po/ru/vnstat.po
+++ /dev/null
@@ -1,71 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: vnstat\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 11:48+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Configuration"
-msgstr "Конфигурация"
-
-msgid "Daily traffic"
-msgstr "Трафик за день"
-
-msgid "Graphs"
-msgstr "Графики"
-
-msgid "Hourly traffic"
-msgstr "Трафик за час"
-
-msgid "Monitor selected interfaces"
-msgstr "Собирать статистику на выбранных интерфейсах"
-
-msgid "Monthly traffic"
-msgstr "Трафик за месяц"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"База данных не настроена. Перейдите в конфигурацию и укажите интерфейсы для "
-"сбора статистики."
-
-msgid "Restart VnStat"
-msgstr "Перезапустить VnStat"
-
-msgid "Summary display"
-msgstr "Сводная статистика"
-
-msgid "Top 10 display"
-msgstr "Последние 10"
-
-msgid "Update »"
-msgstr "Обновить »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Графики VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Монитор трафика VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat - монитор сетевого трафика для Linux, собирающий статистику по "
-"выбранным интерфейсам."
-
-#~ msgid "The VnStat service has been restarted."
-#~ msgstr "VnStat сервис перезапущен."
diff --git a/po/ru/voice_core.po b/po/ru/voice_core.po
deleted file mode 100644
index b6631df..0000000
--- a/po/ru/voice_core.po
+++ /dev/null
@@ -1,24 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: voice_core\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 11:23+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Phones"
-msgstr "Телефоны"
-
-msgid "Voice"
-msgstr "Голос"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/ru/voice_diag.po b/po/ru/voice_diag.po
deleted file mode 100644
index 5c98de0..0000000
--- a/po/ru/voice_diag.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: voice_diag\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-08-15 11:22+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Diagnostics"
-msgstr "Диагностика"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr "Доступные виды диагностики зависят от установленных модулей."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"В данном меню содержатся опции, которые позволяют вам протестировать "
-"голосовые службы вашей системы. Это известно как \"диагностика\"."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/ru/watchcat.po b/po/ru/watchcat.po
deleted file mode 100644
index 828f65d..0000000
--- a/po/ru/watchcat.po
+++ /dev/null
@@ -1,72 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: watchcat\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Forced reboot delay"
-msgstr "Задержка принудительной перезагрузки"
-
-msgid "Host address to ping"
-msgstr "Адрес хоста для опроса"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"Как часто проверять интернет-соединение. По умолчанию значение в секундах, "
-"вы можете использовать суффикс 'm' для указания минут, 'h' - часов, 'd' - "
-"дней"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"В периодическом режиме, данная настройка определяет период перезагрузки. В "
-"интернет-режиме, данная настройка определяет максимальный период времени без "
-"доступа в интернет, после которого устройство перезагружается. По умолчанию "
-"значение в секундах, вы можете использовать суффикс 'm' для указания минут, "
-"'h' - часов, 'd' - дней"
-
-msgid "Operating mode"
-msgstr "Режим работы"
-
-msgid "Period"
-msgstr "Период"
-
-msgid "Ping host"
-msgstr "Хост опроса"
-
-msgid "Ping period"
-msgstr "Период опроса"
-
-msgid "Watchcat"
-msgstr "Watchcat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-"Watchcat позволяет настроить периодическую перезагрузку устройства и/или "
-"перезагрузку при потере интернет-соединения на определённое время."
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"При необходимости перезагрузке системы, watchcat вызовет программную "
-"перезагрузку. При установке ненулевого значения, будет выполнена отложенная "
-"аппаратная перезагрузка при неудачной программной. Установите количество "
-"секунд для отложенной аппаратной перезагрузки или значение 0 для программной."
diff --git a/po/ru/wol.po b/po/ru/wol.po
deleted file mode 100644
index 6921997..0000000
--- a/po/ru/wol.po
+++ /dev/null
@@ -1,58 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: wol\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2012-08-15 12:07+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Использовать широковещательную передачу на все интерфейсы"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "Выберите хост, который необходимо разбудить, или введите его MAC-адрес"
-
-msgid "Host to wake up"
-msgstr "Хост, который необходимо разбудить"
-
-msgid "Network interface to use"
-msgstr "Используемый сетевой интерфейс"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Иногда только одна из двух утилит работает. В случае ошибки, попробуйте "
-"использовать другую"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Определяет интерфейс, по которому будут посланы пакеты WoL"
-
-msgid "Starting WoL utility:"
-msgstr "Запуск WoL утилиты:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Пробуждение по LAN (Wake on LAN, WoL) - технология, позволяющая удалённо "
-"«разбудить» (включить) компьютер посредством отправки через локальную сеть "
-"специальным образом сформированного пакета данных."
-
-msgid "Wake up host"
-msgstr "Разбудить хост"
-
-msgid "WoL program"
-msgstr "Программа WoL"
diff --git a/po/ru/wshaper.po b/po/ru/wshaper.po
deleted file mode 100644
index ac6b659..0000000
--- a/po/ru/wshaper.po
+++ /dev/null
@@ -1,60 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCI: wsharper\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-01-26 15:09+0200\n"
-"PO-Revision-Date: 2012-08-15 11:53+0300\n"
-"Last-Translator: Roman A. aka BasicXP <x12ozmouse@ya.ru>\n"
-"Language-Team: Russian <x12ozmouse@ya.ru>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-"X-Poedit-SourceCharset: UTF-8\n"
-
-msgid "Downlink"
-msgstr "Нисходящий канал"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Ширина полосы пропускания прямого канала (кбит/с)"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Хост или сеть в нотации CIDR."
-
-msgid "Interface"
-msgstr "Интерфейс"
-
-msgid "Low priority destination ports"
-msgstr "Низкоприоритетные порты назначения"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Низкоприоритетные хосты назначения"
-
-msgid "Low priority hosts (Source)"
-msgstr "Низкоприоритетные хосты источника"
-
-msgid "Low priority source ports"
-msgstr "Низкоприоритетные порты источника"
-
-msgid "Uplink"
-msgstr "Восходящий канал"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Пропускная способность обратного канала (кбит/c)"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Установки Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper использует формирование трафика для обеспечения низких задержек "
-"интерактивного трафика даже в случае высокой загруженности интернет-"
-"соединения."
diff --git a/po/sk/ahcp.po b/po/sk/ahcp.po
deleted file mode 100644
index 26a13cc..0000000
--- a/po/sk/ahcp.po
+++ /dev/null
@@ -1,106 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "AHCP Server"
-msgstr ""
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Lease directory"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Served interfaces"
-msgstr ""
-
-msgid "Server"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "Unique ID file"
-msgstr ""
diff --git a/po/sk/asterisk.po b/po/sk/asterisk.po
deleted file mode 100644
index e69de29..0000000
diff --git a/po/sk/base.po b/po/sk/base.po
deleted file mode 100644
index 495ea6e..0000000
--- a/po/sk/base.po
+++ /dev/null
@@ -1,2736 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-msgid "(%s available)"
-msgstr ""
-
-msgid "(empty)"
-msgstr ""
-
-msgid "(no interfaces attached)"
-msgstr ""
-
-msgid "-- Additional Field --"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "1 Minute Load:"
-msgstr ""
-
-msgid "15 Minute Load:"
-msgstr ""
-
-msgid "40MHz 2nd channel above"
-msgstr ""
-
-msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr ""
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr ""
-
-msgid "ARP retry threshold"
-msgstr ""
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Actions"
-msgstr ""
-
-msgid "Activate this network"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-
-msgid "Active Connections"
-msgstr ""
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr ""
-
-msgid "Additional Hosts files"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Advertise IPv6 on network"
-msgstr ""
-
-msgid "Advertised network ID"
-msgstr ""
-
-msgid "Alert"
-msgstr ""
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-
-msgid "Allow all except listed"
-msgstr ""
-
-msgid "Allow listed only"
-msgstr ""
-
-msgid "Allow localhost"
-msgstr ""
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr ""
-
-msgid "Antenna 2"
-msgstr ""
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr ""
-
-msgid "Applying changes"
-msgstr ""
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr ""
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr ""
-
-msgid "Authoritative"
-msgstr ""
-
-msgid "Authorization Required"
-msgstr ""
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid "Available packages"
-msgstr ""
-
-msgid "Average:"
-msgstr ""
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr ""
-
-msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
-
-msgid "Back to scan results"
-msgstr ""
-
-msgid "Background Scan"
-msgstr ""
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr ""
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr ""
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr ""
-
-msgid "Bridge interfaces"
-msgstr ""
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr ""
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr ""
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "Changes"
-msgstr ""
-
-msgid "Changes applied."
-msgstr ""
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check"
-msgstr ""
-
-msgid "Checksum"
-msgstr ""
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr ""
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr ""
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr ""
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr ""
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr ""
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr ""
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Design"
-msgstr ""
-
-msgid "Destination"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr ""
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr ""
-
-msgid "Distance to farthest network member in meters."
-msgstr ""
-
-msgid "Diversity"
-msgstr ""
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr ""
-
-msgid "Domain required"
-msgstr ""
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-
-msgid "Download and install package"
-msgstr ""
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr ""
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Ethernet Adapter"
-msgstr ""
-
-msgid "Ethernet Switch"
-msgstr ""
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr ""
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr ""
-
-msgid "Filter"
-msgstr ""
-
-msgid "Filter private"
-msgstr ""
-
-msgid "Filter useless"
-msgstr ""
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr ""
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr ""
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr ""
-
-msgid "Flash Firmware"
-msgstr ""
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr ""
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr ""
-
-msgid "Frame Bursting"
-msgstr ""
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr ""
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr ""
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "Host entries"
-msgstr ""
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr ""
-
-msgid "Ignore resolve file"
-msgstr ""
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr ""
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr ""
-
-msgid "Initscripts"
-msgstr ""
-
-msgid "Install"
-msgstr ""
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr ""
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr ""
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr ""
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr ""
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr ""
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr ""
-
-msgid "Leasetime"
-msgstr ""
-
-msgid "Leasetime remaining"
-msgstr ""
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr ""
-
-msgid "Link On"
-msgstr ""
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr ""
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr ""
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr ""
-
-msgid "Logout"
-msgstr ""
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr ""
-
-msgid "MAC-Filter"
-msgstr ""
-
-msgid "MAC-List"
-msgstr ""
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr ""
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr ""
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory usage (%)"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Minimum Rate"
-msgstr ""
-
-msgid "Minimum hold time"
-msgstr ""
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Modem device"
-msgstr ""
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr ""
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr ""
-
-msgid "Mount Points"
-msgstr ""
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr ""
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr ""
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr ""
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr ""
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "OPKG-Configuration"
-msgstr ""
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr ""
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr ""
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Owner"
-msgstr ""
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr ""
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr ""
-
-msgid "Packets"
-msgstr ""
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password authentication"
-msgstr ""
-
-msgid "Password of Private Key"
-msgstr ""
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr ""
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr ""
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr ""
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr ""
-
-msgid "Please wait: Device rebooting..."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr ""
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Prot."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr ""
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr ""
-
-msgid "RX"
-msgstr ""
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr ""
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr ""
-
-msgid "Receive"
-msgstr ""
-
-msgid "Receiver Antenna"
-msgstr ""
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr ""
-
-msgid "Regulatory Domain"
-msgstr ""
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr ""
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr ""
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr ""
-
-msgid "Reset Counters"
-msgstr ""
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr ""
-
-msgid "Restore backup"
-msgstr ""
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr ""
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Save & Apply"
-msgstr ""
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr ""
-
-msgid "Scheduled Tasks"
-msgstr ""
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr ""
-
-msgid "Separate WDS"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr ""
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr ""
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr ""
-
-msgid "Skip to navigation"
-msgstr ""
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr ""
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr ""
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr ""
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr ""
-
-msgid "Static IPv6 Routes"
-msgstr ""
-
-msgid "Static Leases"
-msgstr ""
-
-msgid "Static Routes"
-msgstr ""
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr ""
-
-msgid "Submit"
-msgstr ""
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr ""
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "System Log"
-msgstr ""
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Terminate"
-msgstr ""
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr ""
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr ""
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr ""
-
-msgid "Transfer"
-msgstr ""
-
-msgid "Transmission Rate"
-msgstr ""
-
-msgid "Transmit"
-msgstr ""
-
-msgid "Transmit Power"
-msgstr ""
-
-msgid "Transmitter Antenna"
-msgstr ""
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr ""
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr ""
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr ""
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr ""
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr ""
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WDS"
-msgstr ""
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr ""
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-
-msgid "Wifi"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr ""
-
-msgid "Wireless Network"
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr ""
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr ""
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr ""
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr ""
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr ""
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr ""
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr ""
-
-msgid "unspecified"
-msgstr ""
-
-msgid "unspecified -or- create:"
-msgstr ""
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr ""
-
-msgid "« Back"
-msgstr ""
diff --git a/po/sk/commands.po b/po/sk/commands.po
deleted file mode 100644
index 4133dfb..0000000
--- a/po/sk/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/sk/coovachilli.po b/po/sk/coovachilli.po
deleted file mode 100644
index bb5b1b9..0000000
--- a/po/sk/coovachilli.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "CoovaChilli"
-msgstr ""
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
diff --git a/po/sk/ddns.po b/po/sk/ddns.po
deleted file mode 100644
index f14456d..0000000
--- a/po/sk/ddns.po
+++ /dev/null
@@ -1,80 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Check for changed IP every"
-msgstr ""
-
-msgid "Check-time unit"
-msgstr ""
-
-msgid "Custom update-URL"
-msgstr ""
-
-msgid "Dynamic DNS"
-msgstr ""
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr ""
-
-msgid "Force-time unit"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source of IP address"
-msgstr ""
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/sk/diag_core.po b/po/sk/diag_core.po
deleted file mode 100644
index 389516f..0000000
--- a/po/sk/diag_core.po
+++ /dev/null
@@ -1,30 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/sk/diag_devinfo.po b/po/sk/diag_devinfo.po
deleted file mode 100644
index 0d62204..0000000
--- a/po/sk/diag_devinfo.po
+++ /dev/null
@@ -1,206 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr ""
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/sk/ffwizard.po b/po/sk/ffwizard.po
deleted file mode 100644
index 96ff0d2..0000000
--- a/po/sk/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ASCII\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/sk/firewall.po b/po/sk/firewall.po
deleted file mode 100644
index 162786a..0000000
--- a/po/sk/firewall.po
+++ /dev/null
@@ -1,429 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr ""
-
-msgid "Destination port"
-msgstr ""
-
-msgid "Destination zone"
-msgstr ""
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr ""
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr ""
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr ""
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr ""
-
-msgid "Internal port"
-msgstr ""
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr ""
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr ""
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-msgid "Source IP address"
-msgstr ""
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid "Source port"
-msgstr ""
-
-msgid "Source zone"
-msgstr ""
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr ""
-
-msgid "accept"
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr ""
diff --git a/po/sk/freifunk-policyrouting.po b/po/sk/freifunk-policyrouting.po
deleted file mode 100644
index b1a7810..0000000
--- a/po/sk/freifunk-policyrouting.po
+++ /dev/null
@@ -1,49 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/sk/freifunk.po b/po/sk/freifunk.po
deleted file mode 100644
index f9ce1b7..0000000
--- a/po/sk/freifunk.po
+++ /dev/null
@@ -1,385 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/sk/hd_idle.po b/po/sk/hd_idle.po
deleted file mode 100644
index 6c3a352..0000000
--- a/po/sk/hd_idle.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Disk"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable debug"
-msgstr ""
-
-msgid "Idle-time"
-msgstr ""
-
-msgid "Idle-time unit"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-
-msgid "min"
-msgstr ""
diff --git a/po/sk/meshwizard.po b/po/sk/meshwizard.po
deleted file mode 100644
index 146fac4..0000000
--- a/po/sk/meshwizard.po
+++ /dev/null
@@ -1,119 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/sk/minidlna.po b/po/sk/minidlna.po
deleted file mode 100644
index 19c3e53..0000000
--- a/po/sk/minidlna.po
+++ /dev/null
@@ -1,164 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/sk/mmc_over_gpio.po b/po/sk/mmc_over_gpio.po
deleted file mode 100644
index 587ee42..0000000
--- a/po/sk/mmc_over_gpio.po
+++ /dev/null
@@ -1,36 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
diff --git a/po/sk/multiwan.po b/po/sk/multiwan.po
deleted file mode 100644
index b113eac..0000000
--- a/po/sk/multiwan.po
+++ /dev/null
@@ -1,115 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/sk/ntpc.po b/po/sk/ntpc.po
deleted file mode 100644
index d3f8fb8..0000000
--- a/po/sk/ntpc.po
+++ /dev/null
@@ -1,48 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Clock Adjustment"
-msgstr ""
-
-msgid "Count of time measurements"
-msgstr ""
-
-msgid "Current system time"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Offset frequency"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Synchronizes the system time"
-msgstr ""
-
-msgid "Time Server"
-msgstr ""
-
-msgid "Time Servers"
-msgstr ""
-
-msgid "Time Synchronisation"
-msgstr ""
-
-msgid "Update interval (in seconds)"
-msgstr ""
-
-msgid "empty = infinite"
-msgstr ""
diff --git a/po/sk/olsr.po b/po/sk/olsr.po
deleted file mode 100644
index d65bf5d..0000000
--- a/po/sk/olsr.po
+++ /dev/null
@@ -1,576 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/sk/openvpn.po b/po/sk/openvpn.po
deleted file mode 100644
index f875534..0000000
--- a/po/sk/openvpn.po
+++ /dev/null
@@ -1,546 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/sk/p2pblock.po b/po/sk/p2pblock.po
deleted file mode 100644
index 1881b3c..0000000
--- a/po/sk/p2pblock.po
+++ /dev/null
@@ -1,38 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/sk/p910nd.po b/po/sk/p910nd.po
deleted file mode 100644
index 2d24a13..0000000
--- a/po/sk/p910nd.po
+++ /dev/null
@@ -1,35 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Bidirectional mode"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr ""
diff --git a/po/sk/pbx-voicemail.po b/po/sk/pbx-voicemail.po
deleted file mode 100644
index c3a5c5f..0000000
--- a/po/sk/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/sk/pbx.po b/po/sk/pbx.po
deleted file mode 100644
index 0d256e2..0000000
--- a/po/sk/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/sk/polipo.po b/po/sk/polipo.po
deleted file mode 100644
index e003c17..0000000
--- a/po/sk/polipo.po
+++ /dev/null
@@ -1,202 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/sk/qos.po b/po/sk/qos.po
deleted file mode 100644
index cc0c250..0000000
--- a/po/sk/qos.po
+++ /dev/null
@@ -1,98 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/sk/radvd.po b/po/sk/radvd.po
deleted file mode 100644
index 9bd26fa..0000000
--- a/po/sk/radvd.po
+++ /dev/null
@@ -1,367 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/sk/rrdtool.po b/po/sk/rrdtool.po
deleted file mode 100644
index fd3781f..0000000
--- a/po/sk/rrdtool.po
+++ /dev/null
@@ -1,356 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=ASCII\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/sk/samba.po b/po/sk/samba.po
deleted file mode 100644
index 66ec9e0..0000000
--- a/po/sk/samba.po
+++ /dev/null
@@ -1,73 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Allow guests"
-msgstr ""
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-
-msgid "Allowed users"
-msgstr ""
-
-msgid "Create mask"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Directory mask"
-msgstr ""
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Mask for new directories"
-msgstr ""
-
-msgid "Mask for new files"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr ""
-
-msgid "Path"
-msgstr ""
-
-msgid "Read-only"
-msgstr ""
-
-msgid "Share home-directories"
-msgstr ""
-
-msgid "Shared Directories"
-msgstr ""
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr ""
diff --git a/po/sk/splash.po b/po/sk/splash.po
deleted file mode 100644
index 8cf6f8c..0000000
--- a/po/sk/splash.po
+++ /dev/null
@@ -1,308 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/sk/statistics.po b/po/sk/statistics.po
deleted file mode 100644
index d941336..0000000
--- a/po/sk/statistics.po
+++ /dev/null
@@ -1,593 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/sk/tinyproxy.po b/po/sk/tinyproxy.po
deleted file mode 100644
index 128c71d..0000000
--- a/po/sk/tinyproxy.po
+++ /dev/null
@@ -1,255 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/sk/transmission.po b/po/sk/transmission.po
deleted file mode 100644
index 4b4c3af..0000000
--- a/po/sk/transmission.po
+++ /dev/null
@@ -1,290 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/sk/upnp.po b/po/sk/upnp.po
deleted file mode 100644
index 7d0bc1f..0000000
--- a/po/sk/upnp.po
+++ /dev/null
@@ -1,144 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/sk/ushare.po b/po/sk/ushare.po
deleted file mode 100644
index 4c9022b..0000000
--- a/po/sk/ushare.po
+++ /dev/null
@@ -1,45 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Content directories"
-msgstr ""
-
-msgid "Disable telnet console"
-msgstr ""
-
-msgid "Disable webinterface"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Servername"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/sk/uvc_streamer.po b/po/sk/uvc_streamer.po
deleted file mode 100644
index b251f29..0000000
--- a/po/sk/uvc_streamer.po
+++ /dev/null
@@ -1,38 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/sk/vnstat.po b/po/sk/vnstat.po
deleted file mode 100644
index 5926ecf..0000000
--- a/po/sk/vnstat.po
+++ /dev/null
@@ -1,58 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/sk/voice_core.po b/po/sk/voice_core.po
deleted file mode 100644
index 9c30581..0000000
--- a/po/sk/voice_core.po
+++ /dev/null
@@ -1,15 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/sk/voice_diag.po b/po/sk/voice_diag.po
deleted file mode 100644
index 874e11f..0000000
--- a/po/sk/voice_diag.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/sk/watchcat.po b/po/sk/watchcat.po
deleted file mode 100644
index 9ca2abc..0000000
--- a/po/sk/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/sk/wol.po b/po/sk/wol.po
deleted file mode 100644
index 59032ee..0000000
--- a/po/sk/wol.po
+++ /dev/null
@@ -1,44 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/sk/wshaper.po b/po/sk/wshaper.po
deleted file mode 100644
index c974be4..0000000
--- a/po/sk/wshaper.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/templates/ahcp.pot b/po/templates/ahcp.pot
deleted file mode 100644
index f95a8e9..0000000
--- a/po/templates/ahcp.pot
+++ /dev/null
@@ -1,99 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "AHCP Server"
-msgstr ""
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Lease directory"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Served interfaces"
-msgstr ""
-
-msgid "Server"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "Unique ID file"
-msgstr ""
diff --git a/po/templates/asterisk.pot b/po/templates/asterisk.pot
deleted file mode 100644
index e69de29..0000000
diff --git a/po/templates/base.pot b/po/templates/base.pot
deleted file mode 100644
index fd99616..0000000
--- a/po/templates/base.pot
+++ /dev/null
@@ -1,2729 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-msgid "(%s available)"
-msgstr ""
-
-msgid "(empty)"
-msgstr ""
-
-msgid "(no interfaces attached)"
-msgstr ""
-
-msgid "-- Additional Field --"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "1 Minute Load:"
-msgstr ""
-
-msgid "15 Minute Load:"
-msgstr ""
-
-msgid "40MHz 2nd channel above"
-msgstr ""
-
-msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr ""
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr ""
-
-msgid "ARP retry threshold"
-msgstr ""
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Actions"
-msgstr ""
-
-msgid "Activate this network"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-
-msgid "Active Connections"
-msgstr ""
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr ""
-
-msgid "Additional Hosts files"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Advertise IPv6 on network"
-msgstr ""
-
-msgid "Advertised network ID"
-msgstr ""
-
-msgid "Alert"
-msgstr ""
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-
-msgid "Allow all except listed"
-msgstr ""
-
-msgid "Allow listed only"
-msgstr ""
-
-msgid "Allow localhost"
-msgstr ""
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr ""
-
-msgid "Antenna 2"
-msgstr ""
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr ""
-
-msgid "Applying changes"
-msgstr ""
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr ""
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr ""
-
-msgid "Authoritative"
-msgstr ""
-
-msgid "Authorization Required"
-msgstr ""
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid "Available packages"
-msgstr ""
-
-msgid "Average:"
-msgstr ""
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr ""
-
-msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
-
-msgid "Back to scan results"
-msgstr ""
-
-msgid "Background Scan"
-msgstr ""
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr ""
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr ""
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr ""
-
-msgid "Bridge interfaces"
-msgstr ""
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr ""
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr ""
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "Changes"
-msgstr ""
-
-msgid "Changes applied."
-msgstr ""
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check"
-msgstr ""
-
-msgid "Checksum"
-msgstr ""
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr ""
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr ""
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr ""
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr ""
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr ""
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr ""
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Design"
-msgstr ""
-
-msgid "Destination"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr ""
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr ""
-
-msgid "Distance to farthest network member in meters."
-msgstr ""
-
-msgid "Diversity"
-msgstr ""
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr ""
-
-msgid "Domain required"
-msgstr ""
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-
-msgid "Download and install package"
-msgstr ""
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr ""
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Ethernet Adapter"
-msgstr ""
-
-msgid "Ethernet Switch"
-msgstr ""
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr ""
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr ""
-
-msgid "Filter"
-msgstr ""
-
-msgid "Filter private"
-msgstr ""
-
-msgid "Filter useless"
-msgstr ""
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr ""
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr ""
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr ""
-
-msgid "Flash Firmware"
-msgstr ""
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr ""
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr ""
-
-msgid "Frame Bursting"
-msgstr ""
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr ""
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr ""
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "Host entries"
-msgstr ""
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr ""
-
-msgid "Ignore resolve file"
-msgstr ""
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr ""
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr ""
-
-msgid "Initscripts"
-msgstr ""
-
-msgid "Install"
-msgstr ""
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr ""
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr ""
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr ""
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr ""
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr ""
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr ""
-
-msgid "Leasetime"
-msgstr ""
-
-msgid "Leasetime remaining"
-msgstr ""
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr ""
-
-msgid "Link On"
-msgstr ""
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr ""
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr ""
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr ""
-
-msgid "Logout"
-msgstr ""
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr ""
-
-msgid "MAC-Filter"
-msgstr ""
-
-msgid "MAC-List"
-msgstr ""
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr ""
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr ""
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory usage (%)"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Minimum Rate"
-msgstr ""
-
-msgid "Minimum hold time"
-msgstr ""
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Modem device"
-msgstr ""
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr ""
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr ""
-
-msgid "Mount Points"
-msgstr ""
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr ""
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr ""
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr ""
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr ""
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "OPKG-Configuration"
-msgstr ""
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr ""
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr ""
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Owner"
-msgstr ""
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr ""
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr ""
-
-msgid "Packets"
-msgstr ""
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password authentication"
-msgstr ""
-
-msgid "Password of Private Key"
-msgstr ""
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr ""
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr ""
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr ""
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr ""
-
-msgid "Please wait: Device rebooting..."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr ""
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Prot."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr ""
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr ""
-
-msgid "RX"
-msgstr ""
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr ""
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr ""
-
-msgid "Receive"
-msgstr ""
-
-msgid "Receiver Antenna"
-msgstr ""
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr ""
-
-msgid "Regulatory Domain"
-msgstr ""
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr ""
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr ""
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr ""
-
-msgid "Reset Counters"
-msgstr ""
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr ""
-
-msgid "Restore backup"
-msgstr ""
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr ""
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Save & Apply"
-msgstr ""
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr ""
-
-msgid "Scheduled Tasks"
-msgstr ""
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr ""
-
-msgid "Separate WDS"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr ""
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr ""
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr ""
-
-msgid "Skip to navigation"
-msgstr ""
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr ""
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr ""
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr ""
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr ""
-
-msgid "Static IPv6 Routes"
-msgstr ""
-
-msgid "Static Leases"
-msgstr ""
-
-msgid "Static Routes"
-msgstr ""
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr ""
-
-msgid "Submit"
-msgstr ""
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr ""
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "System Log"
-msgstr ""
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Terminate"
-msgstr ""
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr ""
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr ""
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr ""
-
-msgid "Transfer"
-msgstr ""
-
-msgid "Transmission Rate"
-msgstr ""
-
-msgid "Transmit"
-msgstr ""
-
-msgid "Transmit Power"
-msgstr ""
-
-msgid "Transmitter Antenna"
-msgstr ""
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr ""
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr ""
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr ""
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr ""
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr ""
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WDS"
-msgstr ""
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr ""
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-
-msgid "Wifi"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr ""
-
-msgid "Wireless Network"
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr ""
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr ""
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr ""
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr ""
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr ""
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr ""
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr ""
-
-msgid "unspecified"
-msgstr ""
-
-msgid "unspecified -or- create:"
-msgstr ""
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr ""
-
-msgid "« Back"
-msgstr ""
diff --git a/po/templates/commands.pot b/po/templates/commands.pot
deleted file mode 100644
index 5d2ffae..0000000
--- a/po/templates/commands.pot
+++ /dev/null
@@ -1,84 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/templates/coovachilli.pot b/po/templates/coovachilli.pot
deleted file mode 100644
index c1a2bed..0000000
--- a/po/templates/coovachilli.pot
+++ /dev/null
@@ -1,14 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "CoovaChilli"
-msgstr ""
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
diff --git a/po/templates/ddns.pot b/po/templates/ddns.pot
deleted file mode 100644
index a213d4b..0000000
--- a/po/templates/ddns.pot
+++ /dev/null
@@ -1,73 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Check for changed IP every"
-msgstr ""
-
-msgid "Check-time unit"
-msgstr ""
-
-msgid "Custom update-URL"
-msgstr ""
-
-msgid "Dynamic DNS"
-msgstr ""
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr ""
-
-msgid "Force-time unit"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source of IP address"
-msgstr ""
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/templates/diag_core.pot b/po/templates/diag_core.pot
deleted file mode 100644
index 1b34f83..0000000
--- a/po/templates/diag_core.pot
+++ /dev/null
@@ -1,23 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/templates/diag_devinfo.pot b/po/templates/diag_devinfo.pot
deleted file mode 100644
index 350466c..0000000
--- a/po/templates/diag_devinfo.pot
+++ /dev/null
@@ -1,199 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr ""
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/templates/ffwizard.pot b/po/templates/ffwizard.pot
deleted file mode 100644
index 3da2ddf..0000000
--- a/po/templates/ffwizard.pot
+++ /dev/null
@@ -1,150 +0,0 @@
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
diff --git a/po/templates/firewall.pot b/po/templates/firewall.pot
deleted file mode 100644
index 299dba5..0000000
--- a/po/templates/firewall.pot
+++ /dev/null
@@ -1,422 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr ""
-
-msgid "Destination port"
-msgstr ""
-
-msgid "Destination zone"
-msgstr ""
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr ""
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr ""
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr ""
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr ""
-
-msgid "Internal port"
-msgstr ""
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr ""
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr ""
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-msgid "Source IP address"
-msgstr ""
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid "Source port"
-msgstr ""
-
-msgid "Source zone"
-msgstr ""
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr ""
-
-msgid "accept"
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr ""
diff --git a/po/templates/freifunk-policyrouting.pot b/po/templates/freifunk-policyrouting.pot
deleted file mode 100644
index b4c35c1..0000000
--- a/po/templates/freifunk-policyrouting.pot
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/templates/freifunk.pot b/po/templates/freifunk.pot
deleted file mode 100644
index 270c94b..0000000
--- a/po/templates/freifunk.pot
+++ /dev/null
@@ -1,378 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/templates/hd_idle.pot b/po/templates/hd_idle.pot
deleted file mode 100644
index 2bf38f1..0000000
--- a/po/templates/hd_idle.pot
+++ /dev/null
@@ -1,34 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Disk"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable debug"
-msgstr ""
-
-msgid "Idle-time"
-msgstr ""
-
-msgid "Idle-time unit"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-
-msgid "min"
-msgstr ""
diff --git a/po/templates/meshwizard.pot b/po/templates/meshwizard.pot
deleted file mode 100644
index 63a6563..0000000
--- a/po/templates/meshwizard.pot
+++ /dev/null
@@ -1,112 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/templates/minidlna.pot b/po/templates/minidlna.pot
deleted file mode 100644
index 2b35d1e..0000000
--- a/po/templates/minidlna.pot
+++ /dev/null
@@ -1,157 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/templates/mmc_over_gpio.pot b/po/templates/mmc_over_gpio.pot
deleted file mode 100644
index 1cc8de3..0000000
--- a/po/templates/mmc_over_gpio.pot
+++ /dev/null
@@ -1,29 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
diff --git a/po/templates/multiwan.pot b/po/templates/multiwan.pot
deleted file mode 100644
index 954eed1..0000000
--- a/po/templates/multiwan.pot
+++ /dev/null
@@ -1,108 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/templates/ntpc.pot b/po/templates/ntpc.pot
deleted file mode 100644
index 1ed4c40..0000000
--- a/po/templates/ntpc.pot
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Clock Adjustment"
-msgstr ""
-
-msgid "Count of time measurements"
-msgstr ""
-
-msgid "Current system time"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Offset frequency"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Synchronizes the system time"
-msgstr ""
-
-msgid "Time Server"
-msgstr ""
-
-msgid "Time Servers"
-msgstr ""
-
-msgid "Time Synchronisation"
-msgstr ""
-
-msgid "Update interval (in seconds)"
-msgstr ""
-
-msgid "empty = infinite"
-msgstr ""
diff --git a/po/templates/olsr.pot b/po/templates/olsr.pot
deleted file mode 100644
index c15325c..0000000
--- a/po/templates/olsr.pot
+++ /dev/null
@@ -1,569 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/templates/openvpn.pot b/po/templates/openvpn.pot
deleted file mode 100644
index 001747e..0000000
--- a/po/templates/openvpn.pot
+++ /dev/null
@@ -1,539 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/templates/p2pblock.pot b/po/templates/p2pblock.pot
deleted file mode 100644
index 6fa5da1..0000000
--- a/po/templates/p2pblock.pot
+++ /dev/null
@@ -1,31 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/templates/p910nd.pot b/po/templates/p910nd.pot
deleted file mode 100644
index 1b79f53..0000000
--- a/po/templates/p910nd.pot
+++ /dev/null
@@ -1,28 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Bidirectional mode"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr ""
diff --git a/po/templates/pbx-voicemail.pot b/po/templates/pbx-voicemail.pot
deleted file mode 100644
index 35cdca3..0000000
--- a/po/templates/pbx-voicemail.pot
+++ /dev/null
@@ -1,81 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/templates/pbx.pot b/po/templates/pbx.pot
deleted file mode 100644
index 803c946..0000000
--- a/po/templates/pbx.pot
+++ /dev/null
@@ -1,442 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/templates/polipo.pot b/po/templates/polipo.pot
deleted file mode 100644
index beb0bdb..0000000
--- a/po/templates/polipo.pot
+++ /dev/null
@@ -1,195 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/templates/qos.pot b/po/templates/qos.pot
deleted file mode 100644
index ec0445c..0000000
--- a/po/templates/qos.pot
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/templates/radvd.pot b/po/templates/radvd.pot
deleted file mode 100644
index ff9eb54..0000000
--- a/po/templates/radvd.pot
+++ /dev/null
@@ -1,360 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/templates/rrdtool.pot b/po/templates/rrdtool.pot
deleted file mode 100644
index 0a105ec..0000000
--- a/po/templates/rrdtool.pot
+++ /dev/null
@@ -1,349 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr "Content-Type: text/plain; charset=ISO-8859-1"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/templates/samba.pot b/po/templates/samba.pot
deleted file mode 100644
index d91400b..0000000
--- a/po/templates/samba.pot
+++ /dev/null
@@ -1,66 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Allow guests"
-msgstr ""
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-
-msgid "Allowed users"
-msgstr ""
-
-msgid "Create mask"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Directory mask"
-msgstr ""
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Mask for new directories"
-msgstr ""
-
-msgid "Mask for new files"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr ""
-
-msgid "Path"
-msgstr ""
-
-msgid "Read-only"
-msgstr ""
-
-msgid "Share home-directories"
-msgstr ""
-
-msgid "Shared Directories"
-msgstr ""
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr ""
diff --git a/po/templates/splash.pot b/po/templates/splash.pot
deleted file mode 100644
index d340a88..0000000
--- a/po/templates/splash.pot
+++ /dev/null
@@ -1,300 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/templates/statistics.pot b/po/templates/statistics.pot
deleted file mode 100644
index 5f2e9dd..0000000
--- a/po/templates/statistics.pot
+++ /dev/null
@@ -1,586 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/templates/tinyproxy.pot b/po/templates/tinyproxy.pot
deleted file mode 100644
index 712fad9..0000000
--- a/po/templates/tinyproxy.pot
+++ /dev/null
@@ -1,248 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/templates/transmission.pot b/po/templates/transmission.pot
deleted file mode 100644
index 5892abc..0000000
--- a/po/templates/transmission.pot
+++ /dev/null
@@ -1,283 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/templates/upnp.pot b/po/templates/upnp.pot
deleted file mode 100644
index 25a4f42..0000000
--- a/po/templates/upnp.pot
+++ /dev/null
@@ -1,137 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/templates/ushare.pot b/po/templates/ushare.pot
deleted file mode 100644
index 7e4dbc1..0000000
--- a/po/templates/ushare.pot
+++ /dev/null
@@ -1,38 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Content directories"
-msgstr ""
-
-msgid "Disable telnet console"
-msgstr ""
-
-msgid "Disable webinterface"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Servername"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/templates/uvc_streamer.pot b/po/templates/uvc_streamer.pot
deleted file mode 100644
index 08980eb..0000000
--- a/po/templates/uvc_streamer.pot
+++ /dev/null
@@ -1,29 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid "Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/templates/vnstat.pot b/po/templates/vnstat.pot
deleted file mode 100644
index 4dccf05..0000000
--- a/po/templates/vnstat.pot
+++ /dev/null
@@ -1,51 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/templates/voice_core.pot b/po/templates/voice_core.pot
deleted file mode 100644
index 64c93eb..0000000
--- a/po/templates/voice_core.pot
+++ /dev/null
@@ -1,8 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/templates/voice_diag.pot b/po/templates/voice_diag.pot
deleted file mode 100644
index ba28b45..0000000
--- a/po/templates/voice_diag.pot
+++ /dev/null
@@ -1,15 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/templates/watchcat.pot b/po/templates/watchcat.pot
deleted file mode 100644
index 0005ead..0000000
--- a/po/templates/watchcat.pot
+++ /dev/null
@@ -1,46 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/templates/wol.pot b/po/templates/wol.pot
deleted file mode 100644
index 10db87c..0000000
--- a/po/templates/wol.pot
+++ /dev/null
@@ -1,37 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/templates/wshaper.pot b/po/templates/wshaper.pot
deleted file mode 100644
index f89bd56..0000000
--- a/po/templates/wshaper.pot
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr "Content-Type: text/plain; charset=UTF-8"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/tr/ahcp.po b/po/tr/ahcp.po
deleted file mode 100644
index ffacad9..0000000
--- a/po/tr/ahcp.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 21:59+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "AHCP Sunucu"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr "Aktif ACHP  Kiralamaları"
-
-msgid "Address"
-msgstr "Adres"
-
-msgid "Advanced Settings"
-msgstr "Gelişmiş Ayarlar"
-
-msgid "Age"
-msgstr "Yaş"
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr "Genel Ayarlar"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 ve IPv6"
-
-msgid "IPv4 only"
-msgstr "Sadece IPv4"
-
-msgid "IPv6 only"
-msgstr "Sadece IPv6"
-
-msgid "Lease directory"
-msgstr "Kiralama Dizini"
-
-msgid "Lease validity time"
-msgstr "Kiralama Geçerlilik Süresi"
-
-msgid "Log file"
-msgstr "Kayıt Dosyası"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr "Çalışma Modu"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Protocol family"
-msgstr "Protokol Ailesi"
-
-msgid "Served interfaces"
-msgstr "Sunucu Arayüzleri"
-
-msgid "Server"
-msgstr "Sunucu"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr " AHCP Hizmeti Çalışmıyor"
-
-msgid "The AHCP Service is running with ID %s."
-msgstr " AHCP Hizmeti ID %ile çalışıyor"
-
-msgid "There are no active leases."
-msgstr "Aktif Kiralama Yok"
-
-msgid "Unique ID file"
-msgstr "Benzersiz ID Dosyası"
diff --git a/po/tr/asterisk.po b/po/tr/asterisk.po
deleted file mode 100644
index 9cf9a18..0000000
--- a/po/tr/asterisk.po
+++ /dev/null
@@ -1,11 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
diff --git a/po/tr/base.po b/po/tr/base.po
deleted file mode 100644
index 088d504..0000000
--- a/po/tr/base.po
+++ /dev/null
@@ -1,2763 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d dakika gösteriliyor, %d saniye aralıklı)"
-
-msgid "(%s available)"
-msgstr "(%s uygun)"
-
-msgid "(empty)"
-msgstr "(boş)"
-
-msgid "(no interfaces attached)"
-msgstr "(arayüz eklenmedi)"
-
-msgid "-- Additional Field --"
-msgstr "-- Ek Alan--"
-
-msgid "-- Please choose --"
-msgstr "-- Lütfen seçiniz --"
-
-msgid "-- custom --"
-msgstr "-- özel --"
-
-msgid "1 Minute Load:"
-msgstr "1 Dakikalık Yük:"
-
-msgid "15 Minute Load:"
-msgstr "15 Dakikalık Yük:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz 2. kanal üzerinde"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz 2. kanal altında"
-
-msgid "5 Minute Load:"
-msgstr "5 Dakikalık Yük:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\\\"Temel Servis Ayar Tanımlayıcısı\\\"> BSSID </ abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Alan Adı Sistemi\">DNS</abbr> port sorgula"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Alan Adı Sistemi\">DNS</abbr> sunucu port"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protokolü Sürüm 4\">IPv4</abbr>-Adres"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protokolü Sürüm 4\">IPv4</abbr>-Gateway"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protokolü Sürüm 4\">IPv4</abbr>-Netmask"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protokolü Sürüm 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protokolü Sürüm 6\">IPv6</abbr>-Gateway"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Ayarları"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Adı"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-Adresi"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"maximal\">Maks.</abbr> <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr> leases"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"maximal\">Maks.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> paket boyutu"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">Maks.</abbr> eşzamanlı sorgu"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "AR Desteği"
-
-msgid "ARP retry threshold"
-msgstr "ARP yenileme aralığı"
-
-msgid "ATM Bridges"
-msgstr "ATM Köprüleri"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Actions"
-msgstr ""
-
-msgid "Activate this network"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-
-msgid "Active Connections"
-msgstr ""
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr ""
-
-msgid "Additional Hosts files"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Advertise IPv6 on network"
-msgstr ""
-
-msgid "Advertised network ID"
-msgstr ""
-
-msgid "Alert"
-msgstr ""
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-
-msgid "Allow all except listed"
-msgstr ""
-
-msgid "Allow listed only"
-msgstr ""
-
-msgid "Allow localhost"
-msgstr ""
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr ""
-
-msgid "Antenna 2"
-msgstr ""
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr ""
-
-msgid "Applying changes"
-msgstr ""
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr ""
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr ""
-
-msgid "Authoritative"
-msgstr ""
-
-msgid "Authorization Required"
-msgstr ""
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid "Available packages"
-msgstr ""
-
-msgid "Average:"
-msgstr ""
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr ""
-
-msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
-
-msgid "Back to scan results"
-msgstr ""
-
-msgid "Background Scan"
-msgstr ""
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr ""
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr ""
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr ""
-
-msgid "Bridge interfaces"
-msgstr ""
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr ""
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr ""
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "Changes"
-msgstr ""
-
-msgid "Changes applied."
-msgstr ""
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check"
-msgstr ""
-
-msgid "Checksum"
-msgstr ""
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr ""
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr ""
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr ""
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr ""
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr ""
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr ""
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Design"
-msgstr ""
-
-msgid "Destination"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr ""
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr ""
-
-msgid "Distance to farthest network member in meters."
-msgstr ""
-
-msgid "Diversity"
-msgstr ""
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr ""
-
-msgid "Domain required"
-msgstr ""
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-
-msgid "Download and install package"
-msgstr ""
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr ""
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Ethernet Adapter"
-msgstr ""
-
-msgid "Ethernet Switch"
-msgstr ""
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr ""
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr ""
-
-msgid "Filter"
-msgstr ""
-
-msgid "Filter private"
-msgstr ""
-
-msgid "Filter useless"
-msgstr ""
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr ""
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr ""
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr ""
-
-msgid "Flash Firmware"
-msgstr ""
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr ""
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr ""
-
-msgid "Frame Bursting"
-msgstr ""
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr ""
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr ""
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "Host entries"
-msgstr ""
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr ""
-
-msgid "Ignore resolve file"
-msgstr ""
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr ""
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr ""
-
-msgid "Initscripts"
-msgstr ""
-
-msgid "Install"
-msgstr ""
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr ""
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr ""
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr ""
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr ""
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr ""
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr ""
-
-msgid "Leasetime"
-msgstr ""
-
-msgid "Leasetime remaining"
-msgstr ""
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr ""
-
-msgid "Link On"
-msgstr ""
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr ""
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr ""
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr ""
-
-msgid "Logout"
-msgstr ""
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr ""
-
-msgid "MAC-Filter"
-msgstr ""
-
-msgid "MAC-List"
-msgstr ""
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr ""
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr ""
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory usage (%)"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Minimum Rate"
-msgstr ""
-
-msgid "Minimum hold time"
-msgstr ""
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Modem device"
-msgstr ""
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr ""
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr ""
-
-msgid "Mount Points"
-msgstr ""
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr ""
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr ""
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr ""
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr ""
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "OPKG-Configuration"
-msgstr ""
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr ""
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr ""
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Owner"
-msgstr ""
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr ""
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr ""
-
-msgid "Packets"
-msgstr ""
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password authentication"
-msgstr ""
-
-msgid "Password of Private Key"
-msgstr ""
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr ""
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr ""
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr ""
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr ""
-
-msgid "Please wait: Device rebooting..."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr ""
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Prot."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr ""
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr ""
-
-msgid "RX"
-msgstr ""
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr ""
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr ""
-
-msgid "Receive"
-msgstr ""
-
-msgid "Receiver Antenna"
-msgstr ""
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr ""
-
-msgid "Regulatory Domain"
-msgstr ""
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr ""
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr ""
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr ""
-
-msgid "Reset Counters"
-msgstr ""
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr ""
-
-msgid "Restore backup"
-msgstr ""
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr ""
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Save & Apply"
-msgstr ""
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr ""
-
-msgid "Scheduled Tasks"
-msgstr ""
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr ""
-
-msgid "Separate WDS"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr ""
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr ""
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr ""
-
-msgid "Skip to navigation"
-msgstr ""
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr ""
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr ""
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr ""
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr ""
-
-msgid "Static IPv6 Routes"
-msgstr ""
-
-msgid "Static Leases"
-msgstr ""
-
-msgid "Static Routes"
-msgstr ""
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr ""
-
-msgid "Submit"
-msgstr ""
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr ""
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "System Log"
-msgstr ""
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Terminate"
-msgstr ""
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr ""
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr ""
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr ""
-
-msgid "Transfer"
-msgstr ""
-
-msgid "Transmission Rate"
-msgstr ""
-
-msgid "Transmit"
-msgstr ""
-
-msgid "Transmit Power"
-msgstr ""
-
-msgid "Transmitter Antenna"
-msgstr ""
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr ""
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr ""
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr ""
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr ""
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr ""
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WDS"
-msgstr ""
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr ""
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-
-msgid "Wifi"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr ""
-
-msgid "Wireless Network"
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr ""
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"LuCI'nin düzgün çalışması için tarayıcınızda Java Scripti "
-"etkinleştirmelisiniz."
-
-msgid "any"
-msgstr "herhangi"
-
-msgid "auto"
-msgstr "otomatik"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr "köprülü"
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr ""
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "etkin değil"
-
-msgid "expired"
-msgstr "sona ermiş"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-
-msgid "forward"
-msgstr "ileri"
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr "yardım"
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "eğer hedef ağsa"
-
-msgid "input"
-msgstr "giriş"
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "yerel <abbr title=\"Domain Name System\">DNS</abbr> dosyası"
-
-msgid "no"
-msgstr "hayır"
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "hiçbiri"
-
-msgid "off"
-msgstr "kapalı"
-
-msgid "on"
-msgstr "açık"
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr "yönlendirildi"
-
-msgid "tagged"
-msgstr "etiketlendi"
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr "sınırsız"
-
-msgid "unspecified"
-msgstr "tanımsız"
-
-msgid "unspecified -or- create:"
-msgstr "tanımsız -veya- oluşturun:"
-
-msgid "untagged"
-msgstr "etiketsiz"
-
-msgid "yes"
-msgstr "evet"
-
-msgid "« Back"
-msgstr "« Geri"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Şifrelenmiş\">Şifreli</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Tara"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Not: adres/önek"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protokolü Sürüm 4\">IPv4</abbr>-Broadcast"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protokolü Sürüm 6\">IPv6</abbr>-Address"
diff --git a/po/tr/commands.po b/po/tr/commands.po
deleted file mode 100644
index 4132274..0000000
--- a/po/tr/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/tr/coovachilli.po b/po/tr/coovachilli.po
deleted file mode 100644
index b70a840..0000000
--- a/po/tr/coovachilli.po
+++ /dev/null
@@ -1,26 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 23:09+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Network Yapılandırması"
-
-msgid "RADIUS configuration"
-msgstr "Radius Yapılandırması"
-
-msgid "UAM and MAC Authentication"
-msgstr "UAM ve MAC Kimlik Doğrulaması"
diff --git a/po/tr/ddns.po b/po/tr/ddns.po
deleted file mode 100644
index cfe9d72..0000000
--- a/po/tr/ddns.po
+++ /dev/null
@@ -1,88 +0,0 @@
-# Generated from applications/luci-ddns/luasrc/model/cbi/ddns/ddns.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2010-04-02 13:44+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Check for changed IP every"
-msgstr ""
-
-msgid "Check-time unit"
-msgstr ""
-
-msgid "Custom update-URL"
-msgstr ""
-
-msgid "Dynamic DNS"
-msgstr ""
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr ""
-
-msgid "Force-time unit"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source of IP address"
-msgstr ""
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/tr/diag_core.po b/po/tr/diag_core.po
deleted file mode 100644
index d0b6211..0000000
--- a/po/tr/diag_core.po
+++ /dev/null
@@ -1,30 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/tr/diag_devinfo.po b/po/tr/diag_devinfo.po
deleted file mode 100644
index 3251675..0000000
--- a/po/tr/diag_devinfo.po
+++ /dev/null
@@ -1,206 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/tr/ffwizard.po b/po/tr/ffwizard.po
deleted file mode 100644
index d46f261..0000000
--- a/po/tr/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ASCII\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/tr/firewall.po b/po/tr/firewall.po
deleted file mode 100644
index 95a6bb0..0000000
--- a/po/tr/firewall.po
+++ /dev/null
@@ -1,429 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr ""
-
-msgid "Destination port"
-msgstr ""
-
-msgid "Destination zone"
-msgstr ""
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr ""
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr ""
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr ""
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr ""
-
-msgid "Internal port"
-msgstr ""
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr ""
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr ""
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-msgid "Source IP address"
-msgstr ""
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid "Source port"
-msgstr ""
-
-msgid "Source zone"
-msgstr ""
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr ""
-
-msgid "accept"
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr ""
diff --git a/po/tr/freifunk-policyrouting.po b/po/tr/freifunk-policyrouting.po
deleted file mode 100644
index af1616f..0000000
--- a/po/tr/freifunk-policyrouting.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/tr/freifunk.po b/po/tr/freifunk.po
deleted file mode 100644
index 1fc8b22..0000000
--- a/po/tr/freifunk.po
+++ /dev/null
@@ -1,386 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/tr/hd_idle.po b/po/tr/hd_idle.po
deleted file mode 100644
index d4fdabd..0000000
--- a/po/tr/hd_idle.po
+++ /dev/null
@@ -1,52 +0,0 @@
-# Generated from applications/luci-hd-idle/luasrc/model/cbi/hd_idle.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-10-11 23:15+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "Disk"
-
-msgid "Enable"
-msgstr "Kullanıma Aç"
-
-msgid "Enable debug"
-msgstr "Hata Ayıklama"
-
-msgid "Idle-time"
-msgstr "Bekleme Zamanı"
-
-msgid "Idle-time unit"
-msgstr "bekleme zamanı birimi"
-
-msgid "Settings"
-msgstr "Ayarlar"
-
-# Hours
-msgid "h"
-msgstr "s"
-
-msgid "hd-idle"
-msgstr "Harddisk-Park"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"Harddisk-Park belirli bir zaman sonra diskleri beklemeye alan bir yardımcı "
-"programdır"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "d"
diff --git a/po/tr/meshwizard.po b/po/tr/meshwizard.po
deleted file mode 100644
index b0fcb64..0000000
--- a/po/tr/meshwizard.po
+++ /dev/null
@@ -1,119 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/tr/minidlna.po b/po/tr/minidlna.po
deleted file mode 100644
index 070d64c..0000000
--- a/po/tr/minidlna.po
+++ /dev/null
@@ -1,164 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/tr/mmc_over_gpio.po b/po/tr/mmc_over_gpio.po
deleted file mode 100644
index 349b8fc..0000000
--- a/po/tr/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 23:19+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr "CLK_ayağı"
-
-msgid "CS_pin"
-msgstr "CS_ayağı"
-
-msgid "DI_pin"
-msgstr "DI_ayağı"
-
-msgid "DO_pin"
-msgstr "DO_ayağı"
-
-msgid "Enable"
-msgstr "Etkinleştir"
-
-msgid "MMC/SD driver configuration"
-msgstr "MMC/SD Sürücü Yapılandırması"
-
-msgid "Mode"
-msgstr "Mod"
-
-msgid "Name"
-msgstr "isim"
-
-msgid "Settings"
-msgstr "Ayarlar"
diff --git a/po/tr/multiwan.po b/po/tr/multiwan.po
deleted file mode 100644
index e9d6ece..0000000
--- a/po/tr/multiwan.po
+++ /dev/null
@@ -1,115 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/tr/ntpc.po b/po/tr/ntpc.po
deleted file mode 100644
index 657b2e8..0000000
--- a/po/tr/ntpc.po
+++ /dev/null
@@ -1,55 +0,0 @@
-# Generated from applications/luci-ntpc/luasrc/model/cbi/ntpc/*.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-10-11 22:20+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "Saat Ayarı"
-
-msgid "Count of time measurements"
-msgstr "Zaman Ölçüm Sayacı"
-
-msgid "Current system time"
-msgstr "Mevcut Sistem Saati"
-
-msgid "General"
-msgstr "Genel"
-
-msgid "Hostname"
-msgstr "Sunucu Adı"
-
-msgid "Offset frequency"
-msgstr "Denge Frekansı"
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Synchronizes the system time"
-msgstr "Sistem Saati Senkronizasyonu"
-
-msgid "Time Server"
-msgstr "Zaman Sunucusu"
-
-msgid "Time Servers"
-msgstr "Zaman Sunucuları"
-
-msgid "Time Synchronisation"
-msgstr "Saat Senkronizasyonu"
-
-msgid "Update interval (in seconds)"
-msgstr "Güncelleme Aralığı (Saniye)"
-
-msgid "empty = infinite"
-msgstr "Boş = Sonsuz"
diff --git a/po/tr/olsr.po b/po/tr/olsr.po
deleted file mode 100644
index 3e21fe4..0000000
--- a/po/tr/olsr.po
+++ /dev/null
@@ -1,576 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/tr/openvpn.po b/po/tr/openvpn.po
deleted file mode 100644
index c57805b..0000000
--- a/po/tr/openvpn.po
+++ /dev/null
@@ -1,546 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/tr/p2pblock.po b/po/tr/p2pblock.po
deleted file mode 100644
index 7c670d8..0000000
--- a/po/tr/p2pblock.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 22:45+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Block Time"
-msgstr "Engel Zamanı"
-
-msgid "Enable P2P-Block"
-msgstr "P2P-Bloğu'nu Aç"
-
-msgid "IP-P2P"
-msgstr "iP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Layer7 - Protokolleri"
-
-msgid "P2P-Block"
-msgstr "P2P-Bloğu"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"P2P-Bloğu bir engel (greylist) mekanizmasıdır. izin verilenler listesinde "
-"(Beyaz Liste) olmayan istemciler için p2p protokolünü engeller."
-
-msgid "Portrange"
-msgstr "Portrange"
-
-msgid "Whitelisted IPs"
-msgstr "Beyaz Liste iPleri"
-
-msgid "seconds"
-msgstr "saniye"
diff --git a/po/tr/p910nd.po b/po/tr/p910nd.po
deleted file mode 100644
index 2fe64ad..0000000
--- a/po/tr/p910nd.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 23:24+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Bidirectional mode"
-msgstr "Çift Yönlü Mod"
-
-msgid "Device"
-msgstr "Aygıt"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"USB (kmod-usb-yazıcı) veya paralel port (kmod-lp) kullanabilmek için destek "
-"paketi yüklemeniz gerekebilir."
-
-msgid "Port"
-msgstr "Port"
-
-msgid "Settings"
-msgstr "Ayarlar"
-
-msgid "TCP listener port."
-msgstr "Dinlemedeki TCP portları"
-
-msgid "enable"
-msgstr "Etkinleştir"
-
-msgid "p910nd - Printer server"
-msgstr "P910nd_Yazıcı Sunucusu"
diff --git a/po/tr/pbx-voicemail.po b/po/tr/pbx-voicemail.po
deleted file mode 100644
index 19e26bf..0000000
--- a/po/tr/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/tr/pbx.po b/po/tr/pbx.po
deleted file mode 100644
index 98819b7..0000000
--- a/po/tr/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/tr/polipo.po b/po/tr/polipo.po
deleted file mode 100644
index 25982ec..0000000
--- a/po/tr/polipo.po
+++ /dev/null
@@ -1,202 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/tr/qos.po b/po/tr/qos.po
deleted file mode 100644
index d43300b..0000000
--- a/po/tr/qos.po
+++ /dev/null
@@ -1,103 +0,0 @@
-# Generated from applications/luci-qos/luasrc/model/cbi/qos/qos.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2010-03-25 22:10+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/tr/radvd.po b/po/tr/radvd.po
deleted file mode 100644
index 8b8ed8f..0000000
--- a/po/tr/radvd.po
+++ /dev/null
@@ -1,367 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/tr/rrdtool.po b/po/tr/rrdtool.po
deleted file mode 100644
index cb2187b..0000000
--- a/po/tr/rrdtool.po
+++ /dev/null
@@ -1,356 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ASCII\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/tr/samba.po b/po/tr/samba.po
deleted file mode 100644
index fda2f6e..0000000
--- a/po/tr/samba.po
+++ /dev/null
@@ -1,73 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Allow guests"
-msgstr ""
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-
-msgid "Allowed users"
-msgstr ""
-
-msgid "Create mask"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Directory mask"
-msgstr ""
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Mask for new directories"
-msgstr ""
-
-msgid "Mask for new files"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr ""
-
-msgid "Path"
-msgstr ""
-
-msgid "Read-only"
-msgstr ""
-
-msgid "Share home-directories"
-msgstr ""
-
-msgid "Shared Directories"
-msgstr ""
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr ""
diff --git a/po/tr/splash.po b/po/tr/splash.po
deleted file mode 100644
index 238e028..0000000
--- a/po/tr/splash.po
+++ /dev/null
@@ -1,308 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/tr/statistics.po b/po/tr/statistics.po
deleted file mode 100644
index d963dd8..0000000
--- a/po/tr/statistics.po
+++ /dev/null
@@ -1,594 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/tr/tinyproxy.po b/po/tr/tinyproxy.po
deleted file mode 100644
index a7af49d..0000000
--- a/po/tr/tinyproxy.po
+++ /dev/null
@@ -1,255 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/tr/transmission.po b/po/tr/transmission.po
deleted file mode 100644
index 5a4df01..0000000
--- a/po/tr/transmission.po
+++ /dev/null
@@ -1,290 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/tr/upnp.po b/po/tr/upnp.po
deleted file mode 100644
index 88f65d7..0000000
--- a/po/tr/upnp.po
+++ /dev/null
@@ -1,144 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/tr/ushare.po b/po/tr/ushare.po
deleted file mode 100644
index c905c57..0000000
--- a/po/tr/ushare.po
+++ /dev/null
@@ -1,50 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 22:33+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "İçerik Dizinleri"
-
-msgid "Disable telnet console"
-msgstr "Telnet Konsolunu Kapatma"
-
-msgid "Disable webinterface"
-msgstr "Web Arayüzünü Kapatma"
-
-msgid "Enable"
-msgstr "Aktif Hale Getir"
-
-msgid "Interface"
-msgstr "Arayüz"
-
-msgid "Options"
-msgstr "Seçenekler"
-
-msgid "Servername"
-msgstr "Sunucuadı"
-
-msgid "Settings"
-msgstr "Ayarlar"
-
-msgid "Username"
-msgstr "Kullanıcıadı"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/tr/uvc_streamer.po b/po/tr/uvc_streamer.po
deleted file mode 100644
index 54ec5d0..0000000
--- a/po/tr/uvc_streamer.po
+++ /dev/null
@@ -1,45 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 22:30+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Saniyedeki Kare Sayısı"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Çözünürlük"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Ayarlar"
-
-# akışı yayın olarak çevirdim
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Webcam Yayını"
-
-# Linux-UVC uyumlu web kameranızı yapılandırın.örneği internet tarayıcınıza  <a href="http://%s:%i/">http://%s:%i/</a> yazın.
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Linux-UVC uyumlu web kameranızı yapılandırın.örneği internet tarayıcınıza  "
-"<a href=\"http://%s:%i/\">http://%s:%i/</a> yazın."
diff --git a/po/tr/vnstat.po b/po/tr/vnstat.po
deleted file mode 100644
index 5e001c9..0000000
--- a/po/tr/vnstat.po
+++ /dev/null
@@ -1,58 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/tr/voice_core.po b/po/tr/voice_core.po
deleted file mode 100644
index 642538e..0000000
--- a/po/tr/voice_core.po
+++ /dev/null
@@ -1,18 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-10-11 22:25+0200\n"
-"Last-Translator: vincenzo <tayfun_ozturk@hotmail.com>\n"
-"Language-Team: none\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Telefonlar"
-
-msgid "Voice"
-msgstr "Ses"
diff --git a/po/tr/voice_diag.po b/po/tr/voice_diag.po
deleted file mode 100644
index 715f411..0000000
--- a/po/tr/voice_diag.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/tr/watchcat.po b/po/tr/watchcat.po
deleted file mode 100644
index e62a995..0000000
--- a/po/tr/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/tr/wol.po b/po/tr/wol.po
deleted file mode 100644
index 186ce55..0000000
--- a/po/tr/wol.po
+++ /dev/null
@@ -1,49 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2010-04-19 00:29+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/tr/wshaper.po b/po/tr/wshaper.po
deleted file mode 100644
index 9713be7..0000000
--- a/po/tr/wshaper.po
+++ /dev/null
@@ -1,50 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/uk/ahcp.po b/po/uk/ahcp.po
deleted file mode 100644
index ee25e92..0000000
--- a/po/uk/ahcp.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-28 21:17+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr "Сервер AHCP"
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-"AHCP є протоколом автоматичної конфігурації мереж IPv6 та IPv6/IPv4, що "
-"разраблений для використання замість DHCP. Наприклад, він використовується у "
-"стільникових ad-hoc мережах."
-
-msgid "Active AHCP Leases"
-msgstr "Активні оренди AHCP"
-
-msgid "Address"
-msgstr "Адреса"
-
-msgid "Advanced Settings"
-msgstr "Додаткові параметри"
-
-msgid "Age"
-msgstr "Вік"
-
-msgid "Announced DNS servers"
-msgstr "Оголошені DNS-сервери"
-
-msgid "Announced NTP servers"
-msgstr "Оголошені NTP-сервери"
-
-msgid "Announced prefixes"
-msgstr "Оголошені префікси"
-
-msgid "Collecting data..."
-msgstr "Збирання даних..."
-
-msgid "Forwarder"
-msgstr "Спрямовувач"
-
-msgid "General Setup"
-msgstr "Загальні параметри"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 та IPv6"
-
-msgid "IPv4 only"
-msgstr "Тільки IPv4"
-
-msgid "IPv6 only"
-msgstr "Тільки IPv6"
-
-msgid "Lease directory"
-msgstr "Каталог оренд"
-
-msgid "Lease validity time"
-msgstr "Термін дії оренди"
-
-msgid "Log file"
-msgstr "Файл журналу"
-
-msgid "Multicast address"
-msgstr "Групова адреса"
-
-msgid "Operation mode"
-msgstr "Режим роботи"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Protocol family"
-msgstr "Протокол"
-
-msgid "Served interfaces"
-msgstr "Інтерфейси, які обслуговуються"
-
-msgid "Server"
-msgstr "Сервер"
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr "Дозволяє вказати оголошувані IPv4 та IPv6 NTP-сервери"
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr "Дозволяє вказати оголошувані IPv4 та IPv6 DNS-сервери"
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-"Дозволяє вказати оголошувані IPv4 та IPv6 префікси мережі в нотації CIDR"
-
-msgid "The AHCP Service is not running."
-msgstr "Сервіс AHCP не запущено"
-
-msgid "The AHCP Service is running with ID %s."
-msgstr "Сервіс AHCP запущено з ID %s."
-
-msgid "There are no active leases."
-msgstr "Активних оренд немає."
-
-msgid "Unique ID file"
-msgstr "Файл унікальних ідентифікаторів"
diff --git a/po/uk/asterisk.po b/po/uk/asterisk.po
deleted file mode 100644
index d6dd63e..0000000
--- a/po/uk/asterisk.po
+++ /dev/null
@@ -1,79 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-21 14:22+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Головні налаштування Asterisk"
-
-#~ msgid "AGI directory"
-#~ msgstr "AGI тека "
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Кешувати файли записів поки йде запис"
-
-#~ msgid "Debug Level"
-#~ msgstr "Рівень налагоджування"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Вимкнути деякі попередження"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Зберегти дамп ядра в разі фатальної помилки"
-
-#~ msgid "High Priority"
-#~ msgstr "Високий пріоритет"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Ініціалізувати шифрування"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Використовувати внутрішні таймінги"
-
-#~ msgid "Log directory"
-#~ msgstr "Тека з журналом"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Максимальна кількість дозволених дзвінків"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Максимальне навантаження, при якому зупиняти прийом дзвінків"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Вимкнути кольори в консолі"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Тека з кешованими звуковими файлами"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Запустити з правами Групи"
-
-#~ msgid "The User to run as"
-#~ msgstr "Запустити з правами Користувача"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Тека з голосовою поштою"
-
-#, fuzzy
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Префікс Uniquid з назвою системи "
-
-#~ msgid "Time Zone"
-#~ msgstr "Часовий пояс"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Дозволити переадресацію"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Видалити глобальні змінні"
diff --git a/po/uk/base.po b/po/uk/base.po
deleted file mode 100644
index 6d8a7a3..0000000
--- a/po/uk/base.po
+++ /dev/null
@@ -1,3113 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-29 13:31+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d-хвилинне вікно, %d-секундний інтервал)"
-
-msgid "(%s available)"
-msgstr "(%s доступно)"
-
-msgid "(empty)"
-msgstr "(пусто)"
-
-msgid "(no interfaces attached)"
-msgstr "(нема приєднаних інтерфейсів)"
-
-msgid "-- Additional Field --"
-msgstr "-- Додаткові поля --"
-
-msgid "-- Please choose --"
-msgstr "-- Виберіть --"
-
-msgid "-- custom --"
-msgstr "-- нетипово --"
-
-msgid "1 Minute Load:"
-msgstr "Навантаження за 1 хвилину:"
-
-msgid "15 Minute Load:"
-msgstr "Навантаження за 15 хвилин:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz (2-й канал вище)"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz (2-й канал нижче)"
-
-msgid "5 Minute Load:"
-msgstr "Навантаження за 5 хвилин:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-"<abbr title=\"Basic Service Set Identifier — ідентифікатор основної служби "
-"послуг\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-"Порт <abbr title=\"Domain Name System — система доменних імен\">DNS</abbr>-"
-"запиту"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-"Порт <abbr title=\"Domain Name System — система доменних імен\">DNS</abbr>-"
-"сервера"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-"<abbr title=\"Domain Name System — система доменних імен\">DNS</abbr>-"
-"сервери будуть опитані у порядку, визначеному файлом resolvfile"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"<abbr title=\"Extended Service Set Identifier — ідентифікатор розширеної "
-"служби послуг\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Інтернет-протокол версії 4\">IPv4</abbr>-адреса"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Інтернет-протокол версії 4\">IPv4</abbr>-шлюз"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Інтернет-протокол версії 4\">IPv4</abbr>-маска"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Інтернет-протокол версії 6\">IPv6</abbr>-адреса або мережа "
-"(CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Інтернет-протокол версії 6\">IPv6</abbr>-шлюз"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr ""
-"Настроювання <abbr title=\"Light Emitting Diode — світлодіод\">LED</abbr>"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "Назва <abbr title=\"Light Emitting Diode — світлодіод\">LED</abbr>"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr ""
-"<abbr title=\"Media Access Control — управління доступом до носія\">MAC</"
-"abbr>-адреса"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"<abbr title=\"Максимум\">Max.</abbr> оренд <abbr title=\"Dynamic Host "
-"Configuration Protocol — протокол динамічної конфігурації вузла\">DHCP</abbr>"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-"<abbr title=\"Максимум\">Max.</abbr> розмір пакета <abbr title=\"Extension "
-"Mechanisms for Domain Name System — Механізми розширень для доменної системи "
-"імен\">EDNS0</abbr>"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"Максимум\">Max.</abbr> одночасних запитів"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Парний: %s / Груповий: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr ""
-"<abbr title=\"Access Point Name — символічна назва точки доступу\">APN</abbr>"
-
-msgid "AR Support"
-msgstr "Підтримка AR"
-
-msgid "ARP retry threshold"
-msgstr "Поріг повтору ARP"
-
-msgid "ATM Bridges"
-msgstr "ATM-мости"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-"Ідентифікатор віртуального каналу ATM (<abbr title=\"Virtual Channel "
-"Identifier\">VCI</abbr>)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-"Ідентифікатор віртуального шляху ATM (<abbr title=\"Virtual Path Identifier"
-"\">VPI</abbr>)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"ATM-мости виставляють інкапсульований Ethernet у з'єднаннях AAL5 як "
-"віртуальні мережеві інтерфейси Linux, котрі можуть використовуватися в "
-"поєднанні з DHCP або PPP для підключення до мережі провайдера."
-
-msgid "ATM device number"
-msgstr "Номер ATM-пристрою"
-
-msgid "Accept router advertisements"
-msgstr "Отримувати оголошення маршрутизатора"
-
-msgid "Access Concentrator"
-msgstr "Концентратор доступу"
-
-msgid "Access Point"
-msgstr "Точка доступу"
-
-msgid "Action"
-msgstr "Дія"
-
-msgid "Actions"
-msgstr "Дії"
-
-msgid "Activate this network"
-msgstr "Активувати цю мережу"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "<abbr title=\"Інтернет-протокол версії 4\">IPv4</abbr>-маршрути"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "<abbr title=\"Інтернет-протокол версії 4\">IPv6</abbr>-маршрути"
-
-msgid "Active Connections"
-msgstr "Активні підключення"
-
-msgid "Active DHCP Leases"
-msgstr "Активні оренди DHCP"
-
-msgid "Active DHCPv6 Leases"
-msgstr "Активні оренди DHCPv6"
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Додати"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "Додавати суфікс локального домену до імен, отриманих із файлів hosts"
-
-msgid "Add new interface..."
-msgstr "Додати новий інтерфейс..."
-
-msgid "Additional Hosts files"
-msgstr "Додаткові файли hosts"
-
-msgid "Address"
-msgstr "Адреса"
-
-msgid "Address to access local relay bridge"
-msgstr "Адреса для доступу до мосту локального ретранслятора"
-
-msgid "Administration"
-msgstr "Адміністрування"
-
-msgid "Advanced Settings"
-msgstr "Додаткові параметри"
-
-msgid "Advertise IPv6 on network"
-msgstr "Оголошувати IPv6 у мережі"
-
-msgid "Advertised network ID"
-msgstr "Оголошуваний ідентифікатор мережі"
-
-msgid "Alert"
-msgstr "Тривога"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-"Дозволити <abbr title=\"Secure Shell — безпечна оболонка\">SSH</abbr>-"
-"перевірку пароля"
-
-msgid "Allow all except listed"
-msgstr "Дозволити всі, крім зазначених"
-
-msgid "Allow listed only"
-msgstr "Дозволити тільки зазначені"
-
-msgid "Allow localhost"
-msgstr "Дозволити локальний вузол"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-"Дозволити віддаленим вузлам підключення до локальних SSH-спрямованих портів"
-
-msgid "Allow root logins with password"
-msgstr "Дозволити root-вхід із паролем"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "Дозволити користувачеві <em>root</em> вхід у систему з паролем"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-"Дозволити відповіді від клієнта на сервер у діапазоні 127.0.0.0/8, "
-"наприклад, для RBL-послуг"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "Допустимий діапазон — від 1 до 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-"Завжди використовувати канали 40MHz, навіть якщо вторинний канал "
-"перекривається. Використання цієї опції не відповідає стандарту IEEE "
-"802.11n-2009!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "Якщо ви залишите це невибраним, буде створена додаткова мережа."
-
-msgid "Antenna 1"
-msgstr "Антена 1"
-
-msgid "Antenna 2"
-msgstr "Антена 2"
-
-msgid "Antenna Configuration"
-msgstr "Конфигурація антени"
-
-msgid "Any zone"
-msgstr "Будь-яка зона"
-
-msgid "Apply"
-msgstr "Застосувати"
-
-msgid "Applying changes"
-msgstr "Застосування змін"
-
-msgid "Assign interfaces..."
-msgstr "Призначення інтерфейсів..."
-
-msgid "Associated Stations"
-msgstr "Приєднані станції"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Бездротовий 802.11%s контролер Atheros"
-
-msgid "Authentication"
-msgstr "Автентифікація"
-
-msgid "Authoritative"
-msgstr "Надійний"
-
-msgid "Authorization Required"
-msgstr "Потрібна авторизація"
-
-msgid "Auto Refresh"
-msgstr "Автоматичне оновлення"
-
-msgid "Available"
-msgstr "Доступно"
-
-msgid "Available packages"
-msgstr "Доступні пакети"
-
-msgid "Average:"
-msgstr "Середнє значення:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "Назад"
-
-msgid "Back to Overview"
-msgstr "Повернутися до переліку"
-
-msgid "Back to configuration"
-msgstr "Повернутися до конфігурації"
-
-msgid "Back to overview"
-msgstr "Повернутися до переліку"
-
-msgid "Back to scan results"
-msgstr "Повернутися до результатів сканування"
-
-msgid "Background Scan"
-msgstr "Сканування у фоновому режимі"
-
-msgid "Backup / Flash Firmware"
-msgstr "Резервне копіювання / Оновлення прошивки"
-
-msgid "Backup / Restore"
-msgstr "Резервне копіювання/відновлення"
-
-msgid "Backup file list"
-msgstr "Список файлів резервних копій"
-
-msgid "Bad address specified!"
-msgstr "Вказана неправильна адреса!"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"Нижче наведено визначений список файлів для резервного копіювання. Він "
-"складається із позначених opkg змінених файлів конфігурації, невідокремних "
-"базових файлів, та файлів за користувацькими шаблонами резервного копіювання."
-
-msgid "Bitrate"
-msgstr "Швидкість передачі даних"
-
-msgid "Bogus NX Domain Override"
-msgstr "Відкидати підробки NX-домену"
-
-msgid "Bridge"
-msgstr "Міст"
-
-msgid "Bridge interfaces"
-msgstr "Об'єднати інтерфейси в міст"
-
-msgid "Bridge unit number"
-msgstr "Номер моста"
-
-msgid "Bring up on boot"
-msgstr "Піднімати при завантаженні"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Бездротовий 802.11%s контролер Broadcom"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Бездротовий 802.11 контролер Broadcom BCM%04x"
-
-msgid "Buffered"
-msgstr "Буферизовано"
-
-msgid "Buttons"
-msgstr "Кнопки"
-
-msgid "CPU"
-msgstr "ЦП"
-
-msgid "CPU usage (%)"
-msgstr "Завантаження ЦП, %"
-
-msgid "Cached"
-msgstr "Кешовано"
-
-msgid "Cancel"
-msgstr "Скасувати"
-
-msgid "Chain"
-msgstr "Ланцюжок"
-
-msgid "Changes"
-msgstr "Зміни"
-
-msgid "Changes applied."
-msgstr "Зміни застосовано."
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "Зміна пароля адміністратора для доступу до пристрою"
-
-msgid "Channel"
-msgstr "Канал"
-
-msgid "Check"
-msgstr "Перевірити"
-
-msgid "Checksum"
-msgstr "Контрольна сума"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-"Оберіть зону брандмауера, яку ви хочете призначити на цей інтерфейс. "
-"Виберіть <em>не визначено</em>, щоб видалити інтерфейс з відповідних зон, "
-"або заповніть поле <em>створити</em>, щоб визначити нову зону і прикріпити "
-"до неї інтерфейс."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-"Оберіть мережі, які ви хочете прикріпити до цього бездротового інтерфейсу "
-"або заповніть поле <em>створити</em>, щоб визначити нову мережу."
-
-msgid "Cipher"
-msgstr "Шифр"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-"Натисніть кнопку \\\"Створити архів\\\", щоб завантажити tar-архів поточних "
-"файлів конфігурації. Для відновлення прошивки до її початкового стану, "
-"натисніть кнопку \\\"Відновити\\\" (можливе тільки з образами SquashFS)."
-
-msgid "Client"
-msgstr "Клієнт"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "Ідентифікатор клієнта для відправки при запиті DHCP"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-"Закривати неактивні з'єднання після певного інтервалу часу (секунди). Для "
-"утримання неактивних з'єднань використовуйте 0"
-
-msgid "Close list..."
-msgstr "Згорнути список..."
-
-msgid "Collecting data..."
-msgstr "Збирання даних..."
-
-msgid "Command"
-msgstr "Команда"
-
-msgid "Common Configuration"
-msgstr "Загальна конфігурація"
-
-msgid "Compression"
-msgstr "Стиснення"
-
-msgid "Configuration"
-msgstr "Конфігурація"
-
-msgid "Configuration applied."
-msgstr "Конфігурація застосована."
-
-msgid "Configuration files will be kept."
-msgstr "Конфігураційні файли будуть збережені."
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "Настроїти це монтування, як оверлейне сховище для block-extroot"
-
-msgid "Confirmation"
-msgstr "Підтвердження"
-
-msgid "Connect"
-msgstr "Підключити"
-
-msgid "Connected"
-msgstr "Підключений"
-
-msgid "Connection Limit"
-msgstr "Гранична кількість підключень"
-
-msgid "Connections"
-msgstr "Підключення"
-
-msgid "Country"
-msgstr "Країна"
-
-msgid "Country Code"
-msgstr "Код країни"
-
-msgid "Cover the following interface"
-msgstr "Покривати наступний інтерфейс"
-
-msgid "Cover the following interfaces"
-msgstr "Покривати наступні інтерфейси"
-
-msgid "Create / Assign firewall-zone"
-msgstr "Створити / Визначити зону брандмауера"
-
-msgid "Create Interface"
-msgstr "Створити інтерфейс"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "Створити міст через кілька інтерфейсів"
-
-msgid "Critical"
-msgstr "Критичний"
-
-msgid "Cron Log Level"
-msgstr "Рівень виведення інформації Cron"
-
-msgid "Custom Interface"
-msgstr "Інтерфейс користувача"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Настроювання поведінки <abbr title=\"Light Emitting Diode — світлодіод"
-"\">LED</abbr>, якщо це можливо."
-
-msgid "DHCP Leases"
-msgstr "Оренди DHCP"
-
-msgid "DHCP Server"
-msgstr "Сервер DHCP"
-
-msgid "DHCP and DNS"
-msgstr "DHCP та DNS"
-
-msgid "DHCP client"
-msgstr "Клієнт DHCP"
-
-msgid "DHCP-Options"
-msgstr "Параметри DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr "Оренди DHCPv6"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "Спрямовування DNS-запитів"
-
-msgid "DUID"
-msgstr "DUID"
-
-msgid "Debug"
-msgstr "Зневаджування"
-
-msgid "Default %d"
-msgstr "Типово %d"
-
-msgid "Default gateway"
-msgstr "Типовий шлюз"
-
-msgid "Default state"
-msgstr "Типовий стан"
-
-msgid "Define a name for this network."
-msgstr "Визначення імені для цієї мережі."
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"Визначення додаткових опцій DHCP, наприклад "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\", щоб оголошувати різні DNS-"
-"сервери для клієнтів."
-
-msgid "Delete"
-msgstr "Видалити"
-
-msgid "Delete this interface"
-msgstr "Видалити цей інтерфейс"
-
-msgid "Delete this network"
-msgstr "Видалити цю мережу"
-
-msgid "Description"
-msgstr "Опис"
-
-msgid "Design"
-msgstr "Стиль (тема)"
-
-msgid "Destination"
-msgstr "Призначення"
-
-msgid "Device"
-msgstr "Пристрій"
-
-msgid "Device Configuration"
-msgstr "Конфігурація пристрою"
-
-msgid "Diagnostics"
-msgstr "Діагностика"
-
-msgid "Directory"
-msgstr "Каталог"
-
-msgid "Disable"
-msgstr "Вимкнути"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"Вимкнути <abbr title=\"Dynamic Host Configuration Protocol — протокол "
-"динамічної конфігурації вузла\">DHCP</abbr> для цього інтерфейсу."
-
-msgid "Disable DNS setup"
-msgstr "Вимкнути настроювання DNS"
-
-msgid "Disable HW-Beacon timer"
-msgstr "Вимкнути таймер HW-Beacon"
-
-msgid "Disabled"
-msgstr "Вимкнено"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "Відкидати RFC1918-відповіді від клієнта на сервер"
-
-msgid "Displaying only packages containing"
-msgstr "Показані тільки непорожні пакети"
-
-msgid "Distance Optimization"
-msgstr "Оптимізація за відстанню"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Відстань до найвіддаленішого вузла мережі в метрах."
-
-msgid "Diversity"
-msgstr "Різновидність"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq являє собою комбінований <abbr title=\"Dynamic Host Configuration "
-"Protocol — протокол динамічної конфігурації вузла\">DHCP</abbr>-сервер і "
-"<abbr title=\"Domain Name System — система доменних імен\">DNS</abbr>-"
-"транспортер для брандмауерів <abbr title=\"Network Address Translation — "
-"перетворення (трансляція) мережевих адрес\">NAT</abbr>"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "Не кешувати негативні відповіді, наприклад, за неіснуючих доменів"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-"Не спрямовувати запити, які не можуть бути оброблені публічними серверами "
-"імен"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "Не спрямовувати зворотний перегляд для локальних мереж"
-
-msgid "Do not send probe responses"
-msgstr "Не надсилати відповіді на зондування"
-
-msgid "Domain required"
-msgstr "Потрібен домен"
-
-msgid "Domain whitelist"
-msgstr "\"Білий список\" доменів"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Не пересилати <abbr title=\"Domain Name System — система доменних імен"
-"\">DNS</abbr>-запити без <abbr title=\"Domain Name System — система доменних "
-"імен\">DNS</abbr>-імені"
-
-msgid "Download and install package"
-msgstr "Завантажити та інсталювати пакети"
-
-msgid "Download backup"
-msgstr "Завантажити резервну копію"
-
-msgid "Dropbear Instance"
-msgstr "Реалізація Dropbear"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear — це <abbr title=\"Secure Shell — безпечна оболонка\">SSH</abbr>-"
-"сервер із вбудованим <abbr title=\"Secure Copy\">SCP</abbr>"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Динамічний <abbr title=\"Dynamic Host Configuration Protocol — протокол "
-"динамічної конфігурації вузла\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "Динамічний тунель"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-"Динамічне виділення DHCP-адрес для клієнтів. Якщо вимкнути, будуть "
-"обслуговуватися тільки клієнти, які мають статичні оренди."
-
-msgid "EAP-Method"
-msgstr "EAP-Метод"
-
-msgid "Edit"
-msgstr "Редагувати"
-
-msgid "Edit this interface"
-msgstr "Редагувати цей інтерфейс"
-
-msgid "Edit this network"
-msgstr "Редагувати цю мережу"
-
-msgid "Emergency"
-msgstr "Аварійний"
-
-msgid "Enable"
-msgstr "Увімкнути"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Увімкнути <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "Увімкнути динамічне оновлення кінцевої точки HE.net"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "Увімкнути узгодження IPv6 для PPP-з'єднань"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "Пропускати Jumbo-фрейми"
-
-msgid "Enable NTP client"
-msgstr "Увімкнути NTP-клієнт"
-
-msgid "Enable TFTP server"
-msgstr "Увімкнути TFTP-сервер"
-
-msgid "Enable VLAN functionality"
-msgstr "Увімкнути підтримку VLAN"
-
-msgid "Enable learning and aging"
-msgstr "Увімкнути learning та aging"
-
-msgid "Enable this mount"
-msgstr "Увімкнути це монтування"
-
-msgid "Enable this swap"
-msgstr "Увімкнути це довантаження"
-
-msgid "Enable/Disable"
-msgstr "Увімкнено/Вимкнено"
-
-msgid "Enabled"
-msgstr "Увімкнено"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-"Увімкнути <abbr title=\"Spanning Tree Protocol\">STP</abbr> на цьому мосту"
-
-msgid "Encapsulation mode"
-msgstr "Режим інкапсуляції"
-
-msgid "Encryption"
-msgstr "Шифрування"
-
-msgid "Erasing..."
-msgstr "Видалення..."
-
-msgid "Error"
-msgstr "Помилка"
-
-msgid "Ethernet Adapter"
-msgstr "Адаптер Ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Ethernet-комутатор"
-
-msgid "Expand hosts"
-msgstr "Розширення вузлів"
-
-msgid "Expires"
-msgstr "Дійсний ще"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr "Термін оренди адрес, мінімум 2 хвилини (<code>2m</code>)."
-
-msgid "External system log server"
-msgstr "Зовнішній сервер системного журналу"
-
-msgid "External system log server port"
-msgstr "Порт зовнішнього сервера системного журналу"
-
-msgid "Fast Frames"
-msgstr "Швидкі фрейми"
-
-msgid "File"
-msgstr "Файл"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "І'мя завантажувального образу, що оголощується клієнтам"
-
-msgid "Filesystem"
-msgstr "Файлова система"
-
-msgid "Filter"
-msgstr "Фільтр"
-
-msgid "Filter private"
-msgstr "Фільтрувати приватні"
-
-msgid "Filter useless"
-msgstr "Фільтрувати непридатні"
-
-msgid "Find and join network"
-msgstr "Знайти мережу й приєднатися"
-
-msgid "Find package"
-msgstr "Знайти пакет"
-
-msgid "Finish"
-msgstr "Готово"
-
-msgid "Firewall"
-msgstr "Брандмауер"
-
-msgid "Firewall Settings"
-msgstr "Настройки брандмауера"
-
-msgid "Firewall Status"
-msgstr "Статус брандмауера"
-
-msgid "Firmware Version"
-msgstr "Версія прошивки"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "Фіксований порт для вихідних DNS-запитів"
-
-msgid "Flags"
-msgstr "Позначки"
-
-msgid "Flash Firmware"
-msgstr "Заливаємо прошивку"
-
-msgid "Flash image..."
-msgstr "Відвантажити образ..."
-
-msgid "Flash new firmware image"
-msgstr "Залити новий образ прошивки"
-
-msgid "Flash operations"
-msgstr "Операції заливання"
-
-msgid "Flashing..."
-msgstr "Заливаємо..."
-
-msgid "Force"
-msgstr "Примусово"
-
-msgid "Force 40MHz mode"
-msgstr "Примусово режим 40MHz"
-
-msgid "Force CCMP (AES)"
-msgstr "Примусово CCMP (AES)"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "Примусово DHCP у цій мережі, навіть якщо виявлено інший сервер."
-
-msgid "Force TKIP"
-msgstr "Примусово TKIP"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "Примусово TKIP та CCMP (AES)"
-
-msgid "Forward DHCP traffic"
-msgstr "Спрямовувати DHCP-трафік"
-
-msgid "Forward broadcast traffic"
-msgstr "Спрямовувати широкомовний трафік"
-
-msgid "Forwarding mode"
-msgstr "Режим спрямовування"
-
-msgid "Fragmentation Threshold"
-msgstr "Поріг фрагментації"
-
-msgid "Frame Bursting"
-msgstr "Frame Bursting"
-
-msgid "Free"
-msgstr "Вільно"
-
-msgid "Free space"
-msgstr "Вільне місце"
-
-msgid "Frequency Hopping"
-msgstr "Frequency Hopping"
-
-msgid "GHz"
-msgstr "ГГц"
-
-msgid "GPRS only"
-msgstr "Тільки GPRS"
-
-msgid "Gateway"
-msgstr "Шлюз"
-
-msgid "Gateway ports"
-msgstr "Порти шлюзу"
-
-msgid "General Settings"
-msgstr "Загальні настройки"
-
-msgid "General Setup"
-msgstr "Загальні настройки"
-
-msgid "Generate archive"
-msgstr "Cтворити архів"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Бездротовий 802.11%s контролер"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "Оскільки пароль і підтвердження не співпадають, то пароль не змінено!"
-
-msgid "Go to password configuration..."
-msgstr "Перейти до конфігурації пароля..."
-
-msgid "Go to relevant configuration page"
-msgstr "Перейти до відповідної сторінки конфігурації"
-
-msgid "HE.net password"
-msgstr "Пароль HE.net"
-
-msgid "HE.net user ID"
-msgstr "Ідентифікатор користувача HE.net"
-
-msgid "HT capabilities"
-msgstr "HT-можливості"
-
-msgid "HT mode"
-msgstr "HT-режим"
-
-msgid "Handler"
-msgstr "Обробник"
-
-msgid "Hang Up"
-msgstr "Призупинити"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Тут ви можете настроїти основні параметри вигляду вашого пристрою, такі як "
-"назва (ім’я) вузла або часовий пояс."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-"Тут ви можете вставити відкриті SSH-ключі (по одному на рядок) для SSH з "
-"відкритим ключем автентифікації."
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Бездротовий 802.11b контролер Hermes"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-"Приховати <abbr title=\"Extended Service Set Identifier — ідентифікатор "
-"розширеної служби послуг\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Записи вузлів"
-
-msgid "Host expiry timeout"
-msgstr "Тайм-аут вузла"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "<abbr title=\"Internet Protocol Address\">IP</abbr> вузла або мережа"
-
-msgid "Hostname"
-msgstr "Назва (ім'я) вузла"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "Ім'я вузла для надсилання при запиті DHCP"
-
-msgid "Hostnames"
-msgstr "Імена вузлів"
-
-msgid "IP address"
-msgstr "IP-адреса"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "Брандмауер IPv4"
-
-msgid "IPv4 WAN Status"
-msgstr "Статус IPv4 WAN"
-
-msgid "IPv4 address"
-msgstr "Адреса IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 та IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "Широкомовний IPv4"
-
-msgid "IPv4 gateway"
-msgstr "Шлюз IPv4"
-
-msgid "IPv4 netmask"
-msgstr "Маска мережі IPv4"
-
-msgid "IPv4 only"
-msgstr "Тільки IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "Довжина префікса IPv4"
-
-msgid "IPv4-Address"
-msgstr "IPv4-адреса"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "Брандмауер IPv6"
-
-msgid "IPv6 WAN Status"
-msgstr "Статус IPv6 WAN"
-
-msgid "IPv6 address"
-msgstr "Адреса IPv6"
-
-msgid "IPv6 gateway"
-msgstr "Шлюз IPv6"
-
-msgid "IPv6 only"
-msgstr "Тільки IPv6"
-
-msgid "IPv6 prefix"
-msgstr "Префікс IPv6"
-
-msgid "IPv6 prefix length"
-msgstr "Довжина префікса IPv6"
-
-msgid "IPv6-Address"
-msgstr "IPv6-адреса"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6 у IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6 через IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6 через IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "Ідентичність"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-"Якщо обрано, монтувати пристрій за його UUID замість фіксованого вузла "
-"пристрою"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-"Якщо обрано, монтувати пристрій за назвою його розділу замість фіксованого "
-"вузла пристрою"
-
-msgid "If unchecked, no default route is configured"
-msgstr "Якщо не позначено, типовий маршрут не настроєно"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr "Якщо не позначено, оголошувані адреси DNS-серверів ігноруються"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Якщо фізичної пам'яті недостатньо, невикористовувані дані можуть тимчасово "
-"витіснятися на своп-пристрій, у результаті чого збільшується кількість "
-"корисної оперативної пам'яті (<abbr title=\"Random Access Memory\">RAM</"
-"abbr>). Майте на увазі, що свопінг даних є дуже повільним процесом, оскільки "
-"своп-пристрої не можуть бути доступні з такою високою швидкістю, як <abbr "
-"title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr "Ігнорувати файли hosts"
-
-msgid "Ignore interface"
-msgstr "Ігнорувати интерфейс"
-
-msgid "Ignore resolve file"
-msgstr "Ігнорувати файли resolv"
-
-msgid "Image"
-msgstr "Образ"
-
-msgid "In"
-msgstr "Вх."
-
-msgid "Inactivity timeout"
-msgstr "Тайм-аут бездіяльності"
-
-msgid "Inbound:"
-msgstr "Вхідний:"
-
-msgid "Info"
-msgstr "Інформація"
-
-msgid "Initscript"
-msgstr "Скрипт ініціалізації"
-
-msgid "Initscripts"
-msgstr "Скрипти ініціалізації"
-
-msgid "Install"
-msgstr "Інсталювати"
-
-msgid "Install package %q"
-msgstr "Інсталяція пакета %q"
-
-msgid "Install protocol extensions..."
-msgstr "Інсталяція розширень протоколу..."
-
-msgid "Installed packages"
-msgstr "Інстальовані пакети"
-
-msgid "Interface"
-msgstr "Інтерфейс"
-
-msgid "Interface Configuration"
-msgstr "Конфігурація інтерфейсу"
-
-msgid "Interface Overview"
-msgstr "Огляд інтерфейсів"
-
-msgid "Interface is reconnecting..."
-msgstr "Перепідключення інтерфейсу..."
-
-msgid "Interface is shutting down..."
-msgstr "Інтерфейс завершує роботу..."
-
-msgid "Interface not present or not connected yet."
-msgstr "Інтерфейс відсутній або ще не підключений."
-
-msgid "Interface reconnected"
-msgstr "Інтерфейс перепідключено"
-
-msgid "Interface shut down"
-msgstr "Інтерфейс завершив роботу"
-
-msgid "Interfaces"
-msgstr "Інтерфейси"
-
-msgid "Internal Server Error"
-msgstr "Внутрішня помилка сервера"
-
-msgid "Invalid"
-msgstr "Неприпустимо"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-"Задано невірний VLAN ID! Доступні тільки ідентифікатори в межах між %d і %d."
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "Задано невірний VLAN ID! Доступні тільки унікальні ідентифікатори."
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Неприпустиме ім’я користувача та/або пароль! Спробуйте ще раз."
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Схоже, що ви намагаєтеся залити образ, який не вміщається у флеш-пам'ять! "
-"Перевірте файл образу!"
-
-msgid "Java Script required!"
-msgstr "Потрібен Java Script!"
-
-msgid "Join Network"
-msgstr "Підключення до мережі"
-
-msgid "Join Network: Settings"
-msgstr "Підключення до мережі: Настройки"
-
-msgid "Join Network: Wireless Scan"
-msgstr "Підключення до мережі: Сканування бездротових мереж"
-
-msgid "Keep settings"
-msgstr "Зберегти настройки"
-
-msgid "Kernel Log"
-msgstr "Журнал ядра"
-
-msgid "Kernel Version"
-msgstr "Версія ядра"
-
-msgid "Key"
-msgstr "Ключ"
-
-msgid "Key #%d"
-msgstr "Ключ #%d"
-
-msgid "Kill"
-msgstr "Знищити"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "Сервер L2TP"
-
-msgid "LCP echo failure threshold"
-msgstr "Поріг помилок ехо-запитів LCP"
-
-msgid "LCP echo interval"
-msgstr "Інтервал ехо-запитів LCP"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "Мітка"
-
-msgid "Language"
-msgstr "Мова"
-
-msgid "Language and Style"
-msgstr "Мова та стиль"
-
-msgid "Lease validity time"
-msgstr "Час чинності оренди"
-
-msgid "Leasefile"
-msgstr "Файл оренд"
-
-msgid "Leasetime"
-msgstr "Час оренди"
-
-msgid "Leasetime remaining"
-msgstr "Час оренди, що лишився"
-
-msgid "Leave empty to autodetect"
-msgstr "Залиште поле порожнім для автовизначення"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "Залиште порожнім, щоб використовувати поточну адресу WAN"
-
-msgid "Legend:"
-msgstr "Легенда:"
-
-msgid "Limit"
-msgstr "Межа"
-
-msgid "Link On"
-msgstr "Зв'язок встановлено"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-"Список <abbr title=\"Domain Name System\">DNS</abbr>-серверів, до яких "
-"пересилати запити"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "Список доменів, для яких дозволені RFC1918-відповіді"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "Список доменів, які підтримують результати підробки NX-доменів"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-"Прослуховувати тільки на цьому інтерфейсі, або на всіх (якщо <em>не "
-"визначено</em>)"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "Порт прослуховування для вхідних DNS-запитів"
-
-msgid "Load"
-msgstr "Навантаження"
-
-msgid "Load Average"
-msgstr "Середнє навантаження"
-
-msgid "Loading"
-msgstr "Завантаження"
-
-msgid "Local IPv4 address"
-msgstr "Локальна адреса IPv4"
-
-msgid "Local IPv6 address"
-msgstr "Локальна адреса IPv6"
-
-msgid "Local Startup"
-msgstr "Локальний запуск"
-
-msgid "Local Time"
-msgstr "Місцевий час"
-
-msgid "Local domain"
-msgstr "Локальний домен"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-"Специфікація локальних доменів. Імена, зіставлені цьому домену, ніколи не "
-"спрямовуються і виділяються тільки через DHCP або файли hosts"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-"Суфікс локального домену додається до DHCP-імен вузлів та записів з файлу "
-"hosts"
-
-msgid "Local server"
-msgstr "Локальний сервер"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-"Локалізувати ім'я хоста залежно від запитуючої підмережі, якщо доступні "
-"кілька IP-адрес"
-
-msgid "Localise queries"
-msgstr "Локалізувати запити"
-
-msgid "Locked to channel %d used by %s"
-msgstr "Замкнено на канал %d, використовуваний %s"
-
-msgid "Log output level"
-msgstr "Рівень виведення інформаціі до журналу"
-
-msgid "Log queries"
-msgstr "Журнал запитів"
-
-msgid "Logging"
-msgstr "Журналювання"
-
-msgid "Login"
-msgstr "Увійти"
-
-msgid "Logout"
-msgstr "Вийти"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "Найнижча орендована адреса"
-
-msgid "MAC-Address"
-msgstr "MAC-адреса"
-
-msgid "MAC-Address Filter"
-msgstr "Фільтр MAC-адрес"
-
-msgid "MAC-Filter"
-msgstr "MAC-фільтр"
-
-msgid "MAC-List"
-msgstr "MAC-список"
-
-msgid "MB/s"
-msgstr "MБ/с"
-
-msgid "MHz"
-msgstr "МГц"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "Максимальна швидкість"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "Максимально допустима кількість активних оренд DHCP"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "Максимально допустима кількість одночасних DNS-запитів"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "Максимально допустимий розмір UDP-пакетів EDNS.0"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "Максимальний час очікування готовності модему (секунд)"
-
-msgid "Maximum hold time"
-msgstr "Максимальний час утримування"
-
-msgid "Maximum number of leased addresses."
-msgstr "Максимальна кількість орендованих адрес."
-
-msgid "Mbit/s"
-msgstr "Мбіт/с"
-
-msgid "Memory"
-msgstr "Пам'ять"
-
-msgid "Memory usage (%)"
-msgstr "Використання пам'яті, %"
-
-msgid "Metric"
-msgstr "Метрика"
-
-msgid "Minimum Rate"
-msgstr "Мінімальна швидкість"
-
-msgid "Minimum hold time"
-msgstr "Мінімальний час утримування"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "Відсутні розширення для протоколу %q"
-
-msgid "Mode"
-msgstr "Режим"
-
-msgid "Modem device"
-msgstr "Модем"
-
-msgid "Modem init timeout"
-msgstr "Тайм-аут ініціалізації модему"
-
-msgid "Monitor"
-msgstr "Монітор"
-
-msgid "Mount Entry"
-msgstr "Вхід монтування"
-
-msgid "Mount Point"
-msgstr "Точка монтування"
-
-msgid "Mount Points"
-msgstr "Точки монтування"
-
-msgid "Mount Points - Mount Entry"
-msgstr "Точки монтування - Записи монтування"
-
-msgid "Mount Points - Swap Entry"
-msgstr "Точки монтування - Вхід довантаження"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Точки монтування визначають, до якої точки пристрою пам'яті буде прикріплена "
-"файлова система"
-
-msgid "Mount options"
-msgstr "Опції монтування"
-
-msgid "Mount point"
-msgstr "Точка монтування"
-
-msgid "Mounted file systems"
-msgstr "Змонтовані файлові системи"
-
-msgid "Move down"
-msgstr "Вниз"
-
-msgid "Move up"
-msgstr "Вгору"
-
-msgid "Multicast Rate"
-msgstr "Швидкість багатоадресного потоку"
-
-msgid "Multicast address"
-msgstr "Адреса багатоадресного потоку"
-
-msgid "NAS ID"
-msgstr "Ідентифікатор NAS"
-
-msgid "NTP server candidates"
-msgstr "Кандидати для синхронізації NTP-сервера"
-
-msgid "Name"
-msgstr "Ім'я"
-
-msgid "Name of the new interface"
-msgstr "Ім'я нового інтерфейсу"
-
-msgid "Name of the new network"
-msgstr "Назва (ім'я) нової мережі"
-
-msgid "Navigation"
-msgstr "Навігація"
-
-msgid "Netmask"
-msgstr "Маска мережі"
-
-msgid "Network"
-msgstr "Мережа"
-
-msgid "Network Utilities"
-msgstr "Мережеві утиліти"
-
-msgid "Network boot image"
-msgstr "Образ для мережевого завантаження"
-
-msgid "Network without interfaces."
-msgstr "Мережа без інтерфейсів."
-
-msgid "Next »"
-msgstr "Наступний »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "Немає DHCP-сервера, настроєного для цього інтерфейсу"
-
-msgid "No chains in this table"
-msgstr "У цій таблиці нема ланцюжків"
-
-msgid "No files found"
-msgstr "Файли не знайдено"
-
-msgid "No information available"
-msgstr "Інформація відсутня"
-
-msgid "No negative cache"
-msgstr "Ніяких негативних кешувань"
-
-msgid "No network configured on this device"
-msgstr "На цьому пристрої нема настроєної мережі"
-
-msgid "No network name specified"
-msgstr "Ім'я мережі не визначене"
-
-msgid "No package lists available"
-msgstr "Немає доступних списків пакетів"
-
-msgid "No password set!"
-msgstr "Пароль не встановлено!"
-
-msgid "No rules in this chain"
-msgstr "У цьму ланцюжку нема правил"
-
-msgid "No zone assigned"
-msgstr "Зона не призначена"
-
-msgid "Noise"
-msgstr "Шум"
-
-msgid "Noise:"
-msgstr "Шум:"
-
-msgid "None"
-msgstr "Жоден"
-
-msgid "Normal"
-msgstr "Нормальний"
-
-msgid "Not Found"
-msgstr "Не знайдено"
-
-msgid "Not associated"
-msgstr "Не пов'язаний"
-
-msgid "Not connected"
-msgstr "Не підключено"
-
-msgid "Note: Configuration files will be erased."
-msgstr "Примітка: конфігураційні файли будуть видалені."
-
-msgid "Notice"
-msgstr "Попередження"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "Настройка OPKG"
-
-msgid "Off-State Delay"
-msgstr "Затримка Off-State"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"На цій сторінці ви можете настроїти мережеві інтерфейси. Ви можете "
-"об'єднатиати кілька інтерфейсів мостом, відзначивши поле \"Об'єднати "
-"інтерфейси в міст\" та ввівши імена кількох мережевих інтерфейсів, розділені "
-"пробілами. Також ви можете використовувати <abbr title=\"Virtual Local Area "
-"Network — віртуальна локальна комп'ютерна мережа\">VLAN</abbr>-позначення "
-"<samp>ІНТЕРФЕЙС.НОМЕР_VLAN</samp> (наприклад, <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr "Затримка On-State"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr "Одне або декілька полів містять неприпустимі значення!"
-
-msgid "One or more required fields have no value!"
-msgstr "Одне або декілька обов'язкових полів не мають значень!"
-
-msgid "Open list..."
-msgstr "Відкрити список..."
-
-msgid "Option changed"
-msgstr "Опція змінена"
-
-msgid "Option removed"
-msgstr "Опція видалена"
-
-msgid "Options"
-msgstr "Опції"
-
-msgid "Other:"
-msgstr "Інше:"
-
-msgid "Out"
-msgstr "Вих."
-
-msgid "Outbound:"
-msgstr "Вихідний:"
-
-msgid "Outdoor Channels"
-msgstr "Зовнішні канали"
-
-msgid "Override MAC address"
-msgstr "Перевизначити MAC-адресу"
-
-msgid "Override MTU"
-msgstr "Перевизначити MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "Перевизначення шлюзу у відповідях DHCP"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-"Перевизначення мережевої маски, яка надсилається клієнтам. Зазвичай вона "
-"обчислюється від підмережі, що обслуговується."
-
-msgid "Override the table used for internal routes"
-msgstr ""
-"Перевизначення таблиці, що використовужться для внутрішніх спрямовувань"
-
-msgid "Overview"
-msgstr "Огляд"
-
-msgid "Owner"
-msgstr "Власник"
-
-msgid "PAP/CHAP password"
-msgstr "Пароль PAP/CHAP"
-
-msgid "PAP/CHAP username"
-msgstr "Ім'я користувача PAP/CHAP"
-
-msgid "PID"
-msgstr "<abbr title=\"Process Identifier — Ідентифікатор процесу\">PID</abbr>"
-
-msgid "PIN"
-msgstr ""
-"<abbr title=\"Personal Identification Number — Персональний ідентифікаційний "
-"номер\">>PIN</abbr>"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "Інкапсуляція PPPoA"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "Потрібен пакет libiwinfo!"
-
-msgid "Package lists are older than 24 hours"
-msgstr "Перелік пакетів створеній більше ніж 24 години тому"
-
-msgid "Package name"
-msgstr "Назва пакета"
-
-msgid "Packets"
-msgstr "Пакети"
-
-msgid "Part of zone %q"
-msgstr "Частина зони %q"
-
-msgid "Password"
-msgstr "Пароль"
-
-msgid "Password authentication"
-msgstr "Автентифікація за паролем"
-
-msgid "Password of Private Key"
-msgstr "Пароль закритого ключа"
-
-msgid "Password successfully changed!"
-msgstr "Пароль успішно змінено!"
-
-msgid "Path to CA-Certificate"
-msgstr "Шлях до центру сертифікції"
-
-msgid "Path to Client-Certificate"
-msgstr "Шлях до сертифікату клієнта"
-
-msgid "Path to Private Key"
-msgstr "Шлях до закритого ключа"
-
-msgid "Path to executable which handles the button event"
-msgstr "Шлях до програми, яка обробляє натискання кнопки"
-
-msgid "Peak:"
-msgstr "Пік:"
-
-msgid "Perform reboot"
-msgstr "Виконати перезавантаження"
-
-msgid "Perform reset"
-msgstr "Відновити"
-
-msgid "Phy Rate:"
-msgstr "Фізична швидкість:"
-
-msgid "Physical Settings"
-msgstr "Фізичні параметри"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "пакетів"
-
-msgid "Please enter your username and password."
-msgstr "Введіть ім'я користувача і пароль"
-
-msgid "Please wait: Device rebooting..."
-msgstr "Зачекайте. Пристрій перезавантажується..."
-
-msgid "Policy"
-msgstr "Політика"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Port %d"
-msgstr "Порт %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "Порт %d нетегований у кількох VLAN-ах!"
-
-msgid "Port status:"
-msgstr "Статус порту:"
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-"Вважати вузол недоступним після визначеної кількості невдач отримання "
-"ехо-пакета LCP, використовуйте 0, щоб ігнорувати невдачі"
-
-msgid "Prevents client-to-client communication"
-msgstr "Запобігає зв'язкам клієнт-клієнт"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Бездротовий 802.11b контролер Prism2/2.5/3"
-
-msgid "Proceed"
-msgstr "Продовжити"
-
-msgid "Processes"
-msgstr "Процеси"
-
-msgid "Prot."
-msgstr "Прот."
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid "Protocol family"
-msgstr "Сімейство протоколів"
-
-msgid "Protocol of the new interface"
-msgstr "Протокол нового інтерфейсу"
-
-msgid "Protocol support is not installed"
-msgstr "Підтримка протоколу не інстальована"
-
-msgid "Provide NTP server"
-msgstr "Забезпечувати NTP-сервер"
-
-msgid "Provide new network"
-msgstr "Постачити нову мережу"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Псевдо Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr "Якість"
-
-msgid "RTS/CTS Threshold"
-msgstr "Поріг RTS/CTS"
-
-msgid "RX"
-msgstr "Одержано"
-
-msgid "RX Rate"
-msgstr "Швидкість приймання"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "Бездротовий 802.11%s контролер RaLink"
-
-msgid "Radius-Accounting-Port"
-msgstr "Порт Radius-Accounting"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Секрет Radius-Accounting"
-
-msgid "Radius-Accounting-Server"
-msgstr "Сервер Radius-Accounting"
-
-msgid "Radius-Authentication-Port"
-msgstr "Порт Radius-Authentication"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Секрет Radius-Authentication"
-
-msgid "Radius-Authentication-Server"
-msgstr "Сервер Radius-Authentication"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Читати <code>/etc/ethers</code> для настроювання <abbr title=\"Dynamic Host "
-"Configuration Protocol — Протокол динамічної конфігурації вузла\">DHCP</"
-"abbr>-сервера"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"Дійсно видалити цей інтерфейс? Скасувати видалення неможливо!\n"
-"Ви можете втратити доступ до цього пристрою, якщо ви підключені через цей "
-"інтерфейс."
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"Дійсно видалити цю бездротову мережу? Скасувати видалення неможливо!\n"
-"Ви можете втратити доступ до цього пристрою, якщо ви підключені через цю "
-"мережу."
-
-msgid "Really reset all changes?"
-msgstr "Дійсно скинути всі зміни?"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"Дійсно вимкнути інтерфейс \\\"%s\\\"?\n"
-"Ви можете втратити доступ до цього пристрою, якщо ви підключені через цей "
-"інтерфейс."
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"Дійсно вимкнути мережу?\\\n"
-"Ви можете втратити доступ до цього пристрою, якщо ви підключені через цю "
-"мережу."
-
-msgid "Really switch protocol?"
-msgstr "Дійсно змінити протокол?"
-
-msgid "Realtime Connections"
-msgstr "Підключення у реальному часі"
-
-msgid "Realtime Graphs"
-msgstr "Графіки у реальному часі"
-
-msgid "Realtime Load"
-msgstr "Навантаження у реальному часі"
-
-msgid "Realtime Traffic"
-msgstr "Трафік у реальному часі"
-
-msgid "Realtime Wireless"
-msgstr "Бездротові мережі у реальному часі"
-
-msgid "Rebind protection"
-msgstr "Захист від переприв'язки"
-
-msgid "Reboot"
-msgstr "Перезавантаження"
-
-msgid "Rebooting..."
-msgstr "Перезавантаження..."
-
-msgid "Reboots the operating system of your device"
-msgstr "Перезавантажити операційну систему вашого пристрою"
-
-msgid "Receive"
-msgstr "Прийом"
-
-msgid "Receiver Antenna"
-msgstr "Антена приймача"
-
-msgid "Reconnect this interface"
-msgstr "Перепідключити цей інтерфейс"
-
-msgid "Reconnecting interface"
-msgstr "Перепідключення інтерфейсу"
-
-msgid "References"
-msgstr "Посилання"
-
-msgid "Regulatory Domain"
-msgstr "Регулятивний домен"
-
-msgid "Relay"
-msgstr "Ретранслятор"
-
-msgid "Relay Bridge"
-msgstr "Міст-ретранслятор"
-
-msgid "Relay between networks"
-msgstr "Міжмережевий ретранслятор"
-
-msgid "Relay bridge"
-msgstr "Міст-ретранслятор"
-
-msgid "Remote IPv4 address"
-msgstr "Віддалена адреса IPv4"
-
-msgid "Remove"
-msgstr "Видалити"
-
-msgid "Repeat scan"
-msgstr "Повторити сканування"
-
-msgid "Replace entry"
-msgstr "Замінити запис"
-
-msgid "Replace wireless configuration"
-msgstr "Замінити конфігурацію бездротової мережі"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "Потрібно для деяких провайдерів, наприклад, Charter із DOCSIS 3"
-
-msgid "Reset"
-msgstr "Скинути"
-
-msgid "Reset Counters"
-msgstr "Скинути лічильники"
-
-msgid "Reset to defaults"
-msgstr "Відновити початковий стан"
-
-msgid "Resolv and Hosts Files"
-msgstr "Файли resolv і hosts"
-
-msgid "Resolve file"
-msgstr "Файл resolv"
-
-msgid "Restart"
-msgstr "Перезавантажити"
-
-msgid "Restart Firewall"
-msgstr "Перезавантажити брандмауер"
-
-msgid "Restore backup"
-msgstr "Відновити з резервної копії"
-
-msgid "Reveal/hide password"
-msgstr "Показати/приховати пароль"
-
-msgid "Revert"
-msgstr "Скасувати зміни"
-
-msgid "Root"
-msgstr "Корінь"
-
-msgid "Root directory for files served via TFTP"
-msgstr "Кореневий каталог для файлів TFTP"
-
-msgid "Router Model"
-msgstr "Модель маршрутизатора"
-
-msgid "Router Name"
-msgstr "Назва (ім'я) маршрутизатора"
-
-msgid "Router Password"
-msgstr "Пароль маршрутизатора"
-
-msgid "Routes"
-msgstr "Маршрути"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Маршрути визначають через який інтерфейс і шлюз можна досягнути певного "
-"вузла або мережі."
-
-msgid "Rule #"
-msgstr "Правило #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "Виконати перевірку файлової системи перед монтуванням пристрою"
-
-msgid "Run filesystem check"
-msgstr "Виконати перевірку файлової системи"
-
-msgid "SSH Access"
-msgstr "SSH-доступ"
-
-msgid "SSH-Keys"
-msgstr "SSH-ключі"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Зберегти"
-
-msgid "Save & Apply"
-msgstr "Зберегти і застосувати"
-
-msgid "Save &#38; Apply"
-msgstr "Зберегти і застосувати"
-
-msgid "Scan"
-msgstr "Сканувати"
-
-msgid "Scheduled Tasks"
-msgstr "Заплановані завдання"
-
-msgid "Section added"
-msgstr "Секція додана"
-
-msgid "Section removed"
-msgstr "Секція видалена"
-
-msgid "See \"mount\" manpage for details"
-msgstr "Подробиці див. на сторінці керівництва \"mount\""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-"Надсилати ехо-пакети LCP зі вказаним інтервалом (секунди), ефективно тільки "
-"в поєднанні з порогом помилок"
-
-msgid "Send router solicitations"
-msgstr "Надсилати клопотання маршрутизатора"
-
-msgid "Separate Clients"
-msgstr "Розділяти клієнтів"
-
-msgid "Separate WDS"
-msgstr "Розділяти WDS"
-
-msgid "Server Settings"
-msgstr "Настройки сервера"
-
-msgid "Service Name"
-msgstr "Назва (ім'я) сервісу"
-
-msgid "Service Type"
-msgstr "Тип сервісу"
-
-msgid "Services"
-msgstr "Сервіси"
-
-msgid "Setup DHCP Server"
-msgstr "Настройки DHCP-сервера"
-
-msgid "Setup Time Synchronization"
-msgstr "Настройки синхронізації часу"
-
-msgid "Show current backup file list"
-msgstr "Показати поточний список файлів резервного копіювання"
-
-msgid "Shutdown this interface"
-msgstr "Вимкнути цей інтерфейс"
-
-msgid "Shutdown this network"
-msgstr "Вимкнути цю мережу"
-
-msgid "Signal"
-msgstr "Сигнал"
-
-msgid "Signal:"
-msgstr "Сигнал:"
-
-msgid "Size"
-msgstr "Розмір"
-
-msgid "Skip"
-msgstr "Пропустити"
-
-msgid "Skip to content"
-msgstr "Перейти до вмісту"
-
-msgid "Skip to navigation"
-msgstr "Перейти до навігації"
-
-msgid "Slot time"
-msgstr "Час слота"
-
-msgid "Software"
-msgstr "Програмне забезпечення"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "Деякі поля є неприпустимими, неможливо зберегти значення!"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "На жаль, об'єкт, який ви просили, не знайдено."
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "На жаль, на сервері сталася неочікувана помилка."
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"На жаль, автоматичне оновлення системи не підтримується. Новий образ "
-"прошивки повинен бути залитий вручну. Зверніться до OpenWrt Wiki за "
-"інструкцією з інсталяції для конкретного пристрою."
-
-msgid "Sort"
-msgstr "Сортування"
-
-msgid "Source"
-msgstr "Джерело"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "Визначає час життя оголошеного рекомендованого префіксу в секундах"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "Визначає час життя оголошеного чинного префіксу в секундах"
-
-msgid "Specifies the button state to handle"
-msgstr "Визначає стан кнопки для обробки"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "Визначає каталог, до якого приєднаний пристрій"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "Визначає порт прослуховування цієї реалізації <em>Dropbear</em>"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-"Визначає максимальну кількість невдалих ARP-запитів до вузлів, після якого "
-"вважається, що вузли \"мертві\""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-"Визначає максимальний час (секунди), після якого вважається, що вузли "
-"\"мертві\""
-
-msgid "Specify the secret encryption key here."
-msgstr "Вкажіть тут секретний ключ шифрування."
-
-msgid "Start"
-msgstr "Початок"
-
-msgid "Start priority"
-msgstr "Стартовий пріоритет"
-
-msgid "Startup"
-msgstr "Запуск"
-
-msgid "Static IPv4 Routes"
-msgstr "Статичні маршрути IPv4"
-
-msgid "Static IPv6 Routes"
-msgstr "Статичні маршрути IPv6"
-
-msgid "Static Leases"
-msgstr "Статичні оренди"
-
-msgid "Static Routes"
-msgstr "Статичні маршрути"
-
-msgid "Static WDS"
-msgstr "Статичний WDS"
-
-msgid "Static address"
-msgstr "Статичні адреси"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"Статичні оренди використовуються для призначення фіксованих IP-адрес і "
-"символічних імен вузлів DHCP-клієнтам. Вони також необхідні для статичних "
-"конфігурацій інтерфейсів, коли обслуговуються тільки вузли з відповідною "
-"орендою."
-
-msgid "Status"
-msgstr "Статус"
-
-msgid "Stop"
-msgstr "Зупинити"
-
-msgid "Strict order"
-msgstr "Строгий порядок"
-
-msgid "Submit"
-msgstr "Надіслати"
-
-msgid "Swap Entry"
-msgstr "Вхід довантаження"
-
-msgid "Switch"
-msgstr "Комутатор"
-
-msgid "Switch %q"
-msgstr "Комутатор %q"
-
-msgid "Switch %q (%s)"
-msgstr "Комутатор %q (%s)"
-
-msgid "Switch protocol"
-msgstr "Протокол комутатора"
-
-msgid "Sync with browser"
-msgstr "Синхронізувати з браузером"
-
-msgid "Synchronizing..."
-msgstr "Синхронізація..."
-
-msgid "System"
-msgstr "Система"
-
-msgid "System Log"
-msgstr "Системний журнал"
-
-msgid "System Properties"
-msgstr "Властивосі системи"
-
-msgid "System log buffer size"
-msgstr "Розмір буфера системного журналу"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "Настройки TFTP"
-
-msgid "TFTP server root"
-msgstr "Корінь TFTP-сервера"
-
-msgid "TX"
-msgstr "Передано"
-
-msgid "TX Rate"
-msgstr "Швидкість передавання"
-
-msgid "Table"
-msgstr "Таблиця"
-
-msgid "Target"
-msgstr "Мета"
-
-msgid "Terminate"
-msgstr "Завершити"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"Розділ <em>Конфігурація пристрою</em> охоплює фізичні параметри радіо-"
-"апаратних засобів, такі, як канал, потужність передавача або вибір антени, "
-"які є спільними для всіх визначених бездротових мереж (якщо радіо-апаратні "
-"засоби здатні підтримувати кілька SSID). Параметри окремих мереж, такі, як "
-"шифрування або режим роботи, згруповані в розділі <em>Конфігурація "
-"інтерфейсу</em>."
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-"Пакет <em>libiwinfo-lua</em> не інстальований. Щоб мати можливість "
-"настроювати безпровідні мережі, слід інсталювати цей компонент!"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-"Призначений провайдеру IPv6-префікс, зазвичай закінчується на "
-"<code>::</code>"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"Дозволені символи: <code>A-Z</code>, <code>a-z</code>, <code>0-9</code> та "
-"<code>_</code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr "Файл пристрою пам'яті або розділу (наприклад, <code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Файлова система, яка використовуватиметься для форматування пам'яті "
-"(наприклад, <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-"Образ завантажено. Нижче наведено контрольну суму і розмір файлу. Порівняйте "
-"їх з вихідним файлом для забезпечення цілісності даних.<br /> Натисніть "
-"\"Продовжити\", щоб розпочати процедуру оновлення прошивки."
-
-msgid "The following changes have been committed"
-msgstr "Нижче наведені зміни були застосовані"
-
-msgid "The following changes have been reverted"
-msgstr "Нижче наведені зміни були скасовані"
-
-msgid "The following rules are currently active on this system."
-msgstr "У даний час у цій системі активні такі правила."
-
-msgid "The given network name is not unique"
-msgstr "Задане мережеве ім'я не є унікальним"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-"Обладнання не підтримує мульти-SSID і, якщо ви продовжите, існуюча "
-"конфігурація буде замінена."
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr "Довжина IPv4-префікса в бітах, решта використовується в IPv6-адресах."
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "Довжина IPv6-префікса в бітах"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"Мережеві порти вашого пристрою можуть бути об'єднані у декілька <abbr "
-"title=\"Virtual Local Area Network — віртуальна локальна комп'ютерна "
-"мережа\\\">VLAN</abbr>, у яких комп'ютери можуть напряму спілкуватися один з "
-"одним. <abbr title=\\\"Virtual Local Area Network — віртуальна локальна "
-"комп'ютерна мережа\">VLAN</abbr> часто використовуються для розділення мережі "
-"на окремі сегменти. Зазвичай один виcхідний порт використовується для "
-"з'єднання з більшою мережею, такою наприклад, як Інтернет, а інші порти — "
-"для локальної мережі."
-
-msgid "The selected protocol needs a device assigned"
-msgstr "Обраний протокол потребує призначених пристроїв"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-"Зараз система видаляє розділ конфігурації і коли закінчить, "
-"перезавантажиться."
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"Система перепрошивається.<br /> <strong>НЕ ВИМИКАЙТЕ ЖИВЛЕННЯ ПРИСТРОЮ!</"
-"strong><br /> Зачекайте кілька хвилин перед тим, як пробувати знову "
-"з'єднатися. Залежно від ваших настройок, можливо, вам треба буде оновити "
-"адресу вашого комп'ютера щоб знову отримати доступ до пристрою."
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"Завантажений файл образу не містить підтримуваний формат. Переконайтеся, що "
-"ви вибираєте універсальний формат образу для вашої платформи."
-
-msgid "There are no active leases."
-msgstr "Активних оренд немає."
-
-msgid "There are no pending changes to apply!"
-msgstr "Немає жодних змін до застосування!"
-
-msgid "There are no pending changes to revert!"
-msgstr "Немає жодних змін до скасування!"
-
-msgid "There are no pending changes!"
-msgstr "Немає жодних очікуючих змін!"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-"Немає жодного призначеного пристрою. Призначте мережевийх пристрій у вкладці "
-"\"Фізичні параметри\"."
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-"Цей маршрутизатор не має пароля. Встановіть пароль, шоб захистити веб-"
-"інтерфейс і увімкнути SSH."
-
-msgid "This IPv4 address of the relay"
-msgstr "Це IPv4-адреса ретранслятора"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"Це список шаблонів для відбору файлів і каталогів, які мають увійти до "
-"резервної копії. Змінені файли у <code>/etc/config/</code> та деякі інші "
-"зберігаються автоматично."
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-"Це 32-байтний шістнадцятковий закодований ідентифікатор користувача, не ім'я "
-"для входу"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-"Це вміст файлу <code>/etc/rc.local</code>. Вставте тут ваші власні команди "
-"(перед 'exit 0'), щоб виконати їх у кінці процесу завантаження."
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-"Це локальна адреса кінцевої точки, присвоєна тунельним брокером, зазвичай "
-"закінчується на <code>:2</code>"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Тільки для <abbr title=\"Dynamic Host Configuration Protocol — протокол "
-"динамічної конфігурації вузла\">DHCP</abbr> у локальній мережі"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-"Це системна таблиця Cron (crontab), у якій можна визначити заплановані "
-"завдання."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-"Зазвичай, це адреса найближчої точки присутності, що управляється тунелним "
-"брокером"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"У цьому списку наведені працюючі на даний момент системні процеси та їх "
-"статус."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "Ця сторінка дозволяє настроїти нетипові дії кнопки"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "Ця сторінка надає огляд поточних активних мережних підключень."
-
-msgid "This section contains no values yet"
-msgstr "Ця секція поки що не містить значень"
-
-msgid "Time Synchronization"
-msgstr "Синхронізація часу"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "Синхронізація часу не настроєна."
-
-msgid "Timezone"
-msgstr "Часовий пояс"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-"Щоб відновити файли конфігурації, ви можете відвантажити раніше створений "
-"архів резервної копії."
-
-msgid "Total Available"
-msgstr "Усього доступно"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "Трафік"
-
-msgid "Transfer"
-msgstr "Передано"
-
-msgid "Transmission Rate"
-msgstr "Швидкість передавання"
-
-msgid "Transmit"
-msgstr "Передача"
-
-msgid "Transmit Power"
-msgstr "Потужність передавача"
-
-msgid "Transmitter Antenna"
-msgstr "Антена передавача"
-
-msgid "Trigger"
-msgstr "Тригер"
-
-msgid "Trigger Mode"
-msgstr "Режим запуску"
-
-msgid "Tunnel ID"
-msgstr "Ідентифікатор тунелю"
-
-msgid "Tunnel Interface"
-msgstr "Інтерфейс тунелю"
-
-msgid "Turbo Mode"
-msgstr "Режим Turbo"
-
-msgid "Tx-Power"
-msgstr "Потужність передавача"
-
-msgid "Type"
-msgstr "Тип"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "Тільки UMTS"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "USB-пристрій"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "Не вдалося опрацювати запит"
-
-msgid "Unknown"
-msgstr "Невідомо"
-
-msgid "Unknown Error, password not changed!"
-msgstr "Невідома помилка, пароль не змінився!"
-
-msgid "Unmanaged"
-msgstr "Некерований"
-
-msgid "Unsaved Changes"
-msgstr "Незбережені зміни"
-
-msgid "Unsupported protocol type."
-msgstr "Непідтримуваний тип протоколу."
-
-msgid "Update lists"
-msgstr "Оновити списки..."
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-"Відвантажити sysupgrade-сумісний образ, щоб замінити поточну прошивку. Для "
-"збереження поточної конфігурації встановіть прапорець \"Зберегти настройки\" "
-"(потрібен OpenWrt-сумісний образ прошивки)."
-
-msgid "Upload archive..."
-msgstr "Відвантажити архів..."
-
-msgid "Uploaded File"
-msgstr "Відвантажений файл"
-
-msgid "Uptime"
-msgstr "Час безперервної роботи"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Використовувати <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr "Використовувати DHCP-шлюз"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "Використовувати DNS-сервери, оголошувані вузлом"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "Використовуйте коди країн згідно ISO/IEC 3166 alpha2."
-
-msgid "Use MTU on tunnel interface"
-msgstr "Використовувати на тунельному інтерфейсі MTU"
-
-msgid "Use TTL on tunnel interface"
-msgstr "Використовувати на тунельному інтерфейсі TTL"
-
-msgid "Use as root filesystem"
-msgstr "Використовувати як кореневу файлову систему"
-
-msgid "Use broadcast flag"
-msgstr "Використовувати прапорець широкомовності"
-
-msgid "Use custom DNS servers"
-msgstr "Використовувати особливі DNS-сервери"
-
-msgid "Use default gateway"
-msgstr "Використовувати типовий шлюз"
-
-msgid "Use gateway metric"
-msgstr "Використовувати метрику шлюзу"
-
-msgid "Use preferred lifetime"
-msgstr "Використовувати час життя рекомендованого"
-
-msgid "Use routing table"
-msgstr "Використовувати таблицю маршрутизації"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"Використовуйте кнопку <em>Додати</em>, щоб додати новий запис оренди. "
-"<em>MAC-адреса</em> ідентифікує вузол, <em>IPv4-адреса</em> визначає "
-"фіксовану адресу, яка буде використовуватися, а <em>Назва (ім'я) вузла</em> "
-"призначає символічне ім'я вузла."
-
-msgid "Use valid lifetime"
-msgstr "Використовувати час життя чинного"
-
-msgid "Used"
-msgstr "Використано"
-
-msgid "Used Key Slot"
-msgstr "Використовується слот ключа"
-
-msgid "Username"
-msgstr "Ім'я користувача"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "VLAN-інтерфейс"
-
-msgid "VLANs on %q"
-msgstr "VLAN на %q"
-
-msgid "VLANs on %q (%s)"
-msgstr "VLAN на %q (%s)"
-
-msgid "VPN Server"
-msgstr "VPN-сервер"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "Клас постачальника для відправки при запиті DHCP"
-
-msgid "Verify"
-msgstr "Перевірте"
-
-msgid "Version"
-msgstr "Версія"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "Відкрита система WEP"
-
-msgid "WEP Shared Key"
-msgstr "Спільний ключ WEP"
-
-msgid "WEP passphrase"
-msgstr "Парольна фраза WEP"
-
-msgid "WMM Mode"
-msgstr "Режим WMM"
-
-msgid "WPA passphrase"
-msgstr "Парольна фраза WPA"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA-шифрування потребує інсталяції <em>wpa_supplicant</em> (для режиму "
-"клієнта) або <em>hostapd</em> (для Точки доступу та режиму ad-hoc)."
-
-msgid "Waiting for changes to be applied..."
-msgstr "Очікуємо, доки зміни наберуть чинності..."
-
-msgid "Waiting for command to complete..."
-msgstr "Очікуємо завершення виконання команди..."
-
-msgid "Warning"
-msgstr "Застереження"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Увага: Є незбережені зміни, які будуть втрачені при перезавантаженні!"
-
-msgid "Wifi"
-msgstr "Wi-Fi"
-
-msgid "Wireless"
-msgstr "Бездротові мережі"
-
-msgid "Wireless Adapter"
-msgstr "Бездротовий адаптер"
-
-msgid "Wireless Network"
-msgstr "Бездротова мережа"
-
-msgid "Wireless Overview"
-msgstr "Огляд бездротових мереж"
-
-msgid "Wireless Security"
-msgstr "Безпека бездротової мережі"
-
-msgid "Wireless is disabled or not associated"
-msgstr "Бездротову мережу вимкнено або не пов'язано"
-
-msgid "Wireless is restarting..."
-msgstr "Бездротова мережа перезапускається..."
-
-msgid "Wireless network is disabled"
-msgstr "Бездротова мережа вимкнена"
-
-msgid "Wireless network is enabled"
-msgstr "Бездротова мережа ввімкнена"
-
-msgid "Wireless restarted"
-msgstr "Бездротова мережа перезапущена"
-
-msgid "Wireless shut down"
-msgstr "Бездротова мережа припинила роботу"
-
-msgid "Write received DNS requests to syslog"
-msgstr "Записувати отримані DNS-запити до системного журналу"
-
-msgid "XR Support"
-msgstr "Підтримка XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Тут ви можете увімкнути або вимкнути інстальовані скрипти ініціалізації. "
-"Зміни набудуть чинності після перезавантаження пристрою.<br /><strong>Увага: "
-"Якщо ви вимкнете основний скрипт ініціалізації (наприклад \"network\"), "
-"пристрій може стати недоступним!</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-"Ви повинні увімкнути Java Script у вашому браузері, або LuCI не буде "
-"працювати належним чином."
-
-msgid "any"
-msgstr "будь-який"
-
-msgid "auto"
-msgstr "авто"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "зв'язано"
-
-msgid "create:"
-msgstr "створити:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "Створити міст через вказаний інтерфейс(и)"
-
-msgid "dB"
-msgstr "дБ"
-
-msgid "dBm"
-msgstr "дБм"
-
-msgid "disable"
-msgstr "вимкнено"
-
-msgid "expired"
-msgstr "минув"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"Файл, де зберігаються видані <abbr title=\"Dynamic Host Configuration "
-"Protocol — протокол динамічної конфігурації вузла\">DHCP</abbr>-оренди"
-
-msgid "forward"
-msgstr "переслати"
-
-msgid "full-duplex"
-msgstr "повний дуплекс"
-
-msgid "half-duplex"
-msgstr "напівдуплекс"
-
-msgid "help"
-msgstr "довідка"
-
-msgid "hidden"
-msgstr "прихований"
-
-msgid "if target is a network"
-msgstr "якщо мета — мережа"
-
-msgid "input"
-msgstr "вхід"
-
-msgid "kB"
-msgstr "КБ"
-
-msgid "kB/s"
-msgstr "КБ/с"
-
-msgid "kbit/s"
-msgstr "Кбіт/с"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-"локальний <abbr title=\"Domain Name System — система доменних імен\">DNS</"
-"abbr>-файл"
-
-msgid "no"
-msgstr "ні"
-
-msgid "no link"
-msgstr "нема з'єднання"
-
-msgid "none"
-msgstr "нема нічого"
-
-msgid "off"
-msgstr "вимкнено"
-
-msgid "on"
-msgstr "увімкнено"
-
-msgid "open"
-msgstr "відкрита"
-
-msgid "routed"
-msgstr "спрямовано"
-
-msgid "tagged"
-msgstr "з позначкою"
-
-msgid "unknown"
-msgstr "невідомий"
-
-msgid "unlimited"
-msgstr "необмежений"
-
-msgid "unspecified"
-msgstr "не визначено"
-
-msgid "unspecified -or- create:"
-msgstr "не визначено -або- створити"
-
-msgid "untagged"
-msgstr "без позначки"
-
-msgid "yes"
-msgstr "так"
-
-msgid "« Back"
-msgstr "« Назад"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "Очікування маршрутизатора..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "Увімкнути вбудований NTP-сервер"
-
-#~ msgid "Active Leases"
-#~ msgstr "Активні оренди"
-
-#~ msgid "Open"
-#~ msgstr "Відкрити"
-
-#~ msgid "Bit Rate"
-#~ msgstr "Швидкість передачі даних"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "Конфігурація / Застосування змін"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "Конфігурація / Зміни"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "Конфігурація / Скасування змін"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC-адреса"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Зашифровано\">Зашифр.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr ""
-#~ "<abbr title=\"Wireless Local Area Network — бездротова локальна мережа"
-#~ "\">WLAN</abbr>-сканування"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "Оберіть мережу, яку ви хочете прикріпити до цього бездротового "
-#~ "інтерфейсу. Виберіть <em>не визначено</em>, щоб не прикріпляти ніякої "
-#~ "мережі, або заповніть поле <em>створити</em>, щоб визначити нову мережу."
-
-#~ msgid "Create Network"
-#~ msgstr "Створити мережу"
-
-#~ msgid "Link"
-#~ msgstr "З'єднання"
-
-#~ msgid "Networks"
-#~ msgstr "Мережі"
-
-#~ msgid "Power"
-#~ msgstr "Потужність"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Wi-Fi мережі у вашому оточенні"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing — безкласова міждоменна "
-#~ "маршрутизація\">CIDR</abbr>-запис: адреса/префікс "
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Domain Name System — система доменних імен\">DNS</abbr>-"
-#~ "сервер"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Інтернет-протокол версії 4\">IPv4</abbr>-широкомовний"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Інтернет-протокол версії 6\">IPv6</abbr>-адреса"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "IP-псевдоніми"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "Настройки IPv6"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "Примітка: Якщо ви тут оберете інтерфейс, який є частиною іншої мережі, "
-#~ "він буде переміщений до цієї мережі."
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Дійсно видалити цей інтерфейс? Скасувати видалення неможливо!\\nВи можете "
-#~ "втратити доступ до цього маршрутизатора, якщо ваш комп'ютер підключений "
-#~ "через цей інтерфейс."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Дійсно видалити цю бездротову мережу? Скасувати видалення неможливо!\\nВи "
-#~ "можете втратити доступ до цього маршрутизатора, якщо ваш комп'ютер "
-#~ "підключений через цю мережу."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Дійсно вимкнути інтерфейс \"%s\"?\\nВи можете втратити доступ до цього "
-#~ "маршрутизатора, якщо ваш комп'ютер підключений через цей інтерфейс."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Дійсно вимкнути мережу?\\nВи можете втратити доступ до цього "
-#~ "маршрутизатора, якщо ваш комп'ютер підключений через цей інтерфейс."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Мережеві порти вашого маршрутизатора можуть бути об'єднані у декілька "
-#~ "<abbr title=\"Virtual Local Area Network — віртуальна локальна "
-#~ "комп'ютерна мережа\">VLAN</abbr>, у яких комп'ютери можуть напряму "
-#~ "спілкуватися один з одним. <abbr title=\"Virtual Local Area Network — "
-#~ "віртуальна локальна комп'ютерна мережа\">VLAN</abbr> часто "
-#~ "використовуються для розділення мережі на окремі сегменти. Зазвичай один "
-#~ "вихідний порт використовується для з'єднання з більшою мережею, такою "
-#~ "наприклад, як Інтернет, а інші порти — для локальної мережі."
-
-#~ msgid "Enable buffering"
-#~ msgstr "Увімкнути буферизацію"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6 через IPv4"
diff --git a/po/uk/commands.po b/po/uk/commands.po
deleted file mode 100644
index aaaaaca..0000000
--- a/po/uk/commands.po
+++ /dev/null
@@ -1,95 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-12 21:12+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr "Збирання даних..."
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr "Завантажити"
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/uk/coovachilli.po b/po/uk/coovachilli.po
deleted file mode 100644
index 07ffc55..0000000
--- a/po/uk/coovachilli.po
+++ /dev/null
@@ -1,27 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-29 13:00+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr "Конфігурація мережі"
-
-msgid "RADIUS configuration"
-msgstr "Конфігурація RADIUS"
-
-msgid "UAM and MAC Authentication"
-msgstr "Автентифікація через UAM і MAC"
diff --git a/po/uk/ddns.po b/po/uk/ddns.po
deleted file mode 100644
index ae0e29c..0000000
--- a/po/uk/ddns.po
+++ /dev/null
@@ -1,92 +0,0 @@
-# Generated from applications/luci-ddns/luasrc/model/cbi/ddns/ddns.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2012-12-29 12:47+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "Перевіряти, чи змінилася IP-адреса кожні"
-
-msgid "Check-time unit"
-msgstr "Одиниця часу перевірки"
-
-msgid "Custom update-URL"
-msgstr "Користувацький URL оновлення"
-
-msgid "Dynamic DNS"
-msgstr "Динамічний DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Динамічний DNS дозволяє вашому маршрутизатору бути доступним за фіксованим "
-"доменним ім'ям, маючи динамічну IP-адресу."
-
-msgid "Enable"
-msgstr "Увімкнути"
-
-msgid "Event interface"
-msgstr "Інтерфейс події"
-
-msgid "Force update every"
-msgstr "Примусово оновлювати кожні"
-
-msgid "Force-time unit"
-msgstr "Одиниця часу оновлення"
-
-msgid "Hostname"
-msgstr "Ім'я вузла"
-
-msgid "Interface"
-msgstr "Інтерфейс"
-
-msgid "Network"
-msgstr "Мережа"
-
-msgid "On which interface up should start the ddns script process."
-msgstr "При вмиканні якого інтерфейсу має запускатися процес скрипта DDNS."
-
-msgid "Password"
-msgstr "Пароль"
-
-msgid "Service"
-msgstr "Сервіс"
-
-msgid "Source of IP address"
-msgstr "Джерело IP-адреси"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "Ім'я користувача"
-
-msgid "custom"
-msgstr "користувацький"
-
-# Hours
-msgid "h"
-msgstr "г"
-
-msgid "interface"
-msgstr "інтерфейс"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "хв"
-
-msgid "network"
-msgstr "мережа"
diff --git a/po/uk/diag_core.po b/po/uk/diag_core.po
deleted file mode 100644
index ac50669..0000000
--- a/po/uk/diag_core.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-12 21:17+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr "Налаштування діагностики"
-
-msgid "Diagnostics"
-msgstr "Діагностика"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-"Діагностика доступна в цьому меню залежать від модулів встановлених на "
-"вашому пристрої."
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-"Записи в меню дозволяють виконувати діагностичні тести на вашій системі, щоб "
-"допомогти в усуненні несправностей."
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
-"Використовуючи це меню, ви можете налаштувати діагностику мережі, наприклад, "
-"сканування мережевих пристроїв та пінгів."
diff --git a/po/uk/diag_devinfo.po b/po/uk/diag_devinfo.po
deleted file mode 100644
index 9fa5e3c..0000000
--- a/po/uk/diag_devinfo.po
+++ /dev/null
@@ -1,207 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/uk/ffwizard.po b/po/uk/ffwizard.po
deleted file mode 100644
index a6b101a..0000000
--- a/po/uk/ffwizard.po
+++ /dev/null
@@ -1,163 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-11 20:47+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr "Налаштування мережі"
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr "Пароль"
-
-msgid "Password confirmation"
-msgstr "Підтвердження пароля"
-
-msgid "Password successfully changed"
-msgstr "Пароль успішно змінений"
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr "Невідома помилка"
-
-msgid "Username"
-msgstr "Ім'я користувача"
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr "кбіт/с"
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr "Помилка"
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/uk/firewall.po b/po/uk/firewall.po
deleted file mode 100644
index 170032d..0000000
--- a/po/uk/firewall.po
+++ /dev/null
@@ -1,615 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-29 12:53+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr "%s у %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s із %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s у %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(Запис без імені)"
-
-msgid "(Unnamed Rule)"
-msgstr "(Правило без імені)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(SNAT без імені)"
-
-msgid "-- Please choose --"
-msgstr "-- Виберіть --"
-
-msgid "-- custom --"
-msgstr "-- додатково --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> пакетів за <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr "<var>%d</var> пакетів за <var>%s</var>, підряд <var>%d</var> пакетів"
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> з лімітом %s"
-
-msgid "Action"
-msgstr "Дія"
-
-msgid "Add"
-msgstr "Додати"
-
-msgid "Add and edit..."
-msgstr "Додати та редагувати..."
-
-msgid "Advanced Settings"
-msgstr "Розширені настройки"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "Дозволити спрямовування від <em>зон-джерел</em>:"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "Дозволити спрямовування до <em>зон призначення</em>:"
-
-msgid "Any"
-msgstr "Будь-який"
-
-msgid "Covered networks"
-msgstr "Покриті мережі"
-
-msgid "Custom Rules"
-msgstr "Настроювані правила"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"Настроювані правила дозволяють виконувати довільні команди <em>iptables</"
-"em>, які в іншому випадку не охоплені в межах брандмауера. Команди "
-"виконуються після кожного перезавантаження брандмауера, відразу після "
-"завантаження типового набору правил."
-
-msgid "Destination IP address"
-msgstr "IP-адреса призначення"
-
-msgid "Destination address"
-msgstr "Адреса призначення"
-
-msgid "Destination port"
-msgstr "Порт призначення"
-
-msgid "Destination zone"
-msgstr "Зона призначення"
-
-msgid "Do not rewrite"
-msgstr "Не перезаписувати"
-
-msgid "Drop invalid packets"
-msgstr "Відкидати помилкові пакети"
-
-msgid "Enable"
-msgstr "Увімкнути"
-
-msgid "Enable NAT Loopback"
-msgstr "Увімкнути NAT Loopback"
-
-msgid "Enable SYN-flood protection"
-msgstr "Увімкнути захист від SYN-flood"
-
-msgid "Enable logging on this zone"
-msgstr "Увімкнути реєстрування у цій зоні"
-
-msgid "External IP address"
-msgstr "Зовнішня IP-адреса"
-
-msgid "External port"
-msgstr "Зовнішній порт"
-
-msgid "External zone"
-msgstr "Зовнішня зона"
-
-msgid "Extra arguments"
-msgstr "Додаткові аргументи"
-
-msgid "Firewall"
-msgstr "Брандмауер"
-
-msgid "Firewall - Custom Rules"
-msgstr "Брандмауер — Настроювані правила"
-
-msgid "Firewall - Port Forwards"
-msgstr "Брандмауер — Спрямовування портів"
-
-msgid "Firewall - Traffic Rules"
-msgstr "Брандмауер — Правила трафіка"
-
-msgid "Firewall - Zone Settings"
-msgstr "Брандмауер — Параметри зон"
-
-msgid "Force connection tracking"
-msgstr "Увімкнути відстеження з'єднань"
-
-msgid "Forward"
-msgstr "Спрямовування"
-
-msgid "Forward to"
-msgstr "спрямовування до"
-
-msgid "From %s in %s"
-msgstr "%s у %s"
-
-msgid "From %s in %s with source %s"
-msgstr "%s у %s з вихідним %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "%s у %s з вихідним %s та %s"
-
-msgid "General Settings"
-msgstr "Загальні настройки"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 та IPv6"
-
-msgid "IPv4 only"
-msgstr "Лише IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "Лише IPv6"
-
-msgid "Input"
-msgstr "Вхідний"
-
-msgid "Inter-Zone Forwarding"
-msgstr "Спрямовування крізь зони"
-
-msgid "Internal IP address"
-msgstr "Внутрішня IP-адреса"
-
-msgid "Internal port"
-msgstr "Внутрішній порт"
-
-msgid "Internal zone"
-msgstr "Внутрішня зона"
-
-msgid "Limit log messages"
-msgstr "Обмеження повідомлень журналу"
-
-msgid "MSS clamping"
-msgstr "Затискання MSS"
-
-msgid "Masquerading"
-msgstr "Підміна"
-
-msgid "Match"
-msgstr "Зіставляти"
-
-msgid "Match ICMP type"
-msgstr "Зіставляти ICMP типу"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-"Зіставляти трафік, що спрямовується на заданий порт призначення або діапазон "
-"портів."
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-"Зіставляти вхідний трафік, спрямований на заданий порт призначення або "
-"діапазон портів цього вузла."
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-"Зіставляти вхідний трафік, що виникає на заданому порту джерела або "
-"діапазоні портів вузла клієнта."
-
-msgid "Name"
-msgstr "Ім'я"
-
-msgid "New SNAT rule"
-msgstr "Нове правило SNAT"
-
-msgid "New forward rule"
-msgstr "Нове правило спрямовування"
-
-msgid "New input rule"
-msgstr "Нове вхідне правило"
-
-msgid "New port forward"
-msgstr "Нове спрямовування порту"
-
-msgid "New source NAT"
-msgstr "Новий NAT джерела"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "Зіставляти тільки вхідний трафік, спрямований на задану IP-адресу."
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "Зіставляти тільки вхідний трафік від цих MAC-адрес."
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr "Зіставляти тільки вхідний трафік від цього IP чи діапазону."
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-"Зіставляти тільки вхідний трафік, що виникає на заданому порту джерела або "
-"діапазоні портів вузла клієнта."
-
-msgid "Open ports on router"
-msgstr "Відкрити порти на роутері"
-
-msgid "Other..."
-msgstr "Інше..."
-
-msgid "Output"
-msgstr "Вихідний"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-"Передача додаткових аргументів для IPTables. Використовуйте з обережністю!"
-
-msgid "Port Forwards"
-msgstr "Спрямовування портів"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-"Спрямовування портів дозволяє віддаленим комп'ютерам з Інтернету "
-"підключатися до певного комп'ютера або служби у приватній мережі."
-
-msgid "Protocol"
-msgstr "Протокол"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-"Переспрямувати відповідний вхідний трафік на заданий порт внутрішнього вузла"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "Переспрямувати відповідний вхідний трафік на заданий внутрішній вузол"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "Обмежити підміну заданими підмережами призначення"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "Обмежити підміну заданими вихідними підмережами"
-
-msgid "Restrict to address family"
-msgstr "Обмежити сімейство протоколів"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "Переписувати зіставлений трафік на вказану адресу."
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-"Переписувати зіставлений трафік на вказаний порт джерела. Може залишатися "
-"порожнім, щоб переписувати тільки IP-адресу."
-
-msgid "Rewrite to source %s"
-msgstr "перезапис на вихідний %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "перезапис на вихідний %s, %s"
-
-msgid "SNAT IP address"
-msgstr "IP-адреса SNAT"
-
-msgid "SNAT port"
-msgstr "Порт SNAT"
-
-msgid "Source IP address"
-msgstr "IP-адреса джерела"
-
-msgid "Source MAC address"
-msgstr "MAC-адреса джерела"
-
-msgid "Source NAT"
-msgstr "NAT джерела"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"NAT джерела є специфічною формою маскування, яка дозволяє мати детальний "
-"контроль над IP джерела, що використовуються для вихідного трафіку, "
-"наприклад, для зіставлення кількох WAN-адрес внутрішнім підмережам."
-
-msgid "Source address"
-msgstr "Адреса джерела"
-
-msgid "Source port"
-msgstr "Порт джерела"
-
-msgid "Source zone"
-msgstr "Зона-джерело"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"Брандмауер створює зони поверх ваших мережевих інтерфейсів для управління "
-"потоком мережевого трафіку."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"Опції, наведені нижче, управляють політиками спрямовування між цією (%s) та "
-"іншими зонами. <em>Зони призначення</em> покриваються трафіком, що "
-"<strong>виходить з %q</strong>. <em>Зони-джерела</em> покриваються трафіком "
-"з інших зон, <strong>спрямованим на %q</strong>. Правила спрямування є "
-"<em>односпрямованим</em>, тобто, спрямування від LAN до WAN <em>не</em> "
-"означає, що є також дозвіл спрямовувати від WAN в LAN."
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-"На цій сторінці можна змінити додаткові властивості елемента спрямовування "
-"портів. У більшості випадків змінювати ці параметри немає необхідності."
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-"На цій сторінці можна змінити додаткові властивості елемента правил трафіка, "
-"таких як відповідні параметри джерела та вузлів призначення."
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"Цей розділ визначає загальні властивості %q. Параметри <em>вхідний</em> і "
-"<em>вихідний</em> задають типову політику для трафіку на вході й виході з "
-"цієї зони, а параметр \"спрямовування\" описує політику спрямовування "
-"трафіку між різними мережами в межах зони. Пункт <em>вкриті мережі</em> "
-"визначає, які доступні мережі є членами цієї зони."
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "%s на %s <var>цього пристрою</var>"
-
-msgid "To %s in %s"
-msgstr "%s у %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "%s на <var>цього пристрою</var>"
-
-msgid "To %s, %s in %s"
-msgstr "%s, %s у %s"
-
-msgid "To source IP"
-msgstr "До IP джерела"
-
-msgid "To source port"
-msgstr "До порту джерела"
-
-msgid "Traffic Rules"
-msgstr "Правила трафіка"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"Правила трафіка визначають політику для пакетів, що пересилаються між "
-"різними зонами, наприклад, відхиляти трафік між певними вузлами або відкрити "
-"порти WAN на маршрутизаторі."
-
-msgid "Via %s"
-msgstr "Через %s"
-
-msgid "Via %s at %s"
-msgstr "Через %s на %s"
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-"Ви можете вказати кілька протоколів, вибравши \"-- додатково --\", а потім "
-"увівши їх, розділяючи пробілами."
-
-msgid "Zone %q"
-msgstr "Зона %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "Зона ⇒ Спрямовування"
-
-msgid "Zones"
-msgstr "Зони"
-
-msgid "accept"
-msgstr "приймати"
-
-msgid "any"
-msgstr "будь-який"
-
-msgid "any host"
-msgstr "будь-який вузол"
-
-msgid "any router IP"
-msgstr "будь-який IP роутера"
-
-msgid "any zone"
-msgstr "будь-якій зоні"
-
-msgid "don't track"
-msgstr "не відстеж."
-
-msgid "drop"
-msgstr "опускати"
-
-msgid "reject"
-msgstr "відкидати"
-
-#~ msgid "Destination"
-#~ msgstr "Призначення"
-
-#~ msgid "Family"
-#~ msgstr "Сімейство"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "спрямовування до %s у %s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "спрямовування до %s, %s у %s"
-
-#~ msgid "SNAT"
-#~ msgstr "SNAT"
-
-#~ msgid "Source"
-#~ msgstr "Джерело"
-
-#~ msgid "To %s"
-#~ msgstr "%s"
-
-#~ msgid "To %s at %s"
-#~ msgstr "%s через %s"
-
-#~ msgid "Via"
-#~ msgstr "Через"
-
-#~ msgid "Accept forward"
-#~ msgstr "Приймати спрямовування"
-
-#~ msgid "Accept input"
-#~ msgstr "Приймати вхідні"
-
-#~ msgid "Disable"
-#~ msgstr "Вимкнути"
-
-#~ msgid "Discard forward"
-#~ msgstr "Скасувати спрямовування"
-
-#~ msgid "Discard input"
-#~ msgstr "Скасувати введення"
-
-#~ msgid "Do not track forward"
-#~ msgstr "Не відстежувати спрямовування"
-
-#~ msgid "Do not track input"
-#~ msgstr "Не відстежувати введення"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "діапазон IP"
-
-#~ msgid "IPs"
-#~ msgstr "IP"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MACs"
-#~ msgstr "MAC"
-
-#~ msgid "Refuse forward"
-#~ msgstr "Відкидати спрямовування"
-
-#~ msgid "Refuse input"
-#~ msgstr "Відкидати вхідні дані"
-
-#~ msgid "Rule is disabled"
-#~ msgstr "Правило вимкнене"
-
-#~ msgid "Rule is enabled"
-#~ msgstr "Правило ввімкнене"
-
-#~ msgid "day"
-#~ msgstr "день"
-
-#~ msgid "hour"
-#~ msgstr "годину"
-
-#~ msgid "minute"
-#~ msgstr "хвилину"
-
-#~ msgid "not"
-#~ msgstr "не"
-
-#~ msgid "port"
-#~ msgstr "порт"
-
-#~ msgid "ports"
-#~ msgstr "порти"
-
-#~ msgid "second"
-#~ msgstr "секунду"
-
-#~ msgid "type"
-#~ msgstr "типом"
-
-#~ msgid "types"
-#~ msgstr "типами"
-
-#~ msgid "(optional)"
-#~ msgstr "(необов'язково)"
-
-#~ msgid "Intended destination address"
-#~ msgstr "Адреса призначення"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Внутрішній порт (необов'язково)"
-
-#~ msgid "Advanced Options"
-#~ msgstr "Додаткові параметри"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Розширені правила"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Розширені правила дозволяють налаштувати брандмауер для ваших потреб. "
-#~ "Лише нові з'єднання будуть узгоджені. Пакети, що належать вже відкриті "
-#~ "з'єднання автоматично пропускаються брандмауером."
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "Користувацькі правила (/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "Пристрій"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "Для DNAT узгоджує вхідний трафік, спрямований до відповідної IP адреси "
-#~ "призначення. Для SNAT заміняє адресу джерела на дану адресу"
diff --git a/po/uk/freifunk-policyrouting.po b/po/uk/freifunk-policyrouting.po
deleted file mode 100644
index bb3502f..0000000
--- a/po/uk/freifunk-policyrouting.po
+++ /dev/null
@@ -1,51 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/uk/freifunk.po b/po/uk/freifunk.po
deleted file mode 100644
index 8342186..0000000
--- a/po/uk/freifunk.po
+++ /dev/null
@@ -1,387 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/uk/hd_idle.po b/po/uk/hd_idle.po
deleted file mode 100644
index 4830264..0000000
--- a/po/uk/hd_idle.po
+++ /dev/null
@@ -1,51 +0,0 @@
-# Generated from applications/luci-hd-idle/luasrc/model/cbi/hd_idle.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2013-03-12 21:13+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "Диск"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable debug"
-msgstr ""
-
-msgid "Idle-time"
-msgstr "Час простою"
-
-msgid "Idle-time unit"
-msgstr ""
-
-msgid "Settings"
-msgstr "Налаштування"
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "хв"
diff --git a/po/uk/meshwizard.po b/po/uk/meshwizard.po
deleted file mode 100644
index 9722dd0..0000000
--- a/po/uk/meshwizard.po
+++ /dev/null
@@ -1,120 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/uk/minidlna.po b/po/uk/minidlna.po
deleted file mode 100644
index 7df732f..0000000
--- a/po/uk/minidlna.po
+++ /dev/null
@@ -1,165 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/uk/mmc_over_gpio.po b/po/uk/mmc_over_gpio.po
deleted file mode 100644
index e9b37f2..0000000
--- a/po/uk/mmc_over_gpio.po
+++ /dev/null
@@ -1,42 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-29 13:06+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr "Вивід ВCLK"
-
-msgid "CS_pin"
-msgstr "Вивід CS"
-
-msgid "DI_pin"
-msgstr "Вивід DI"
-
-msgid "DO_pin"
-msgstr "Вивід DO"
-
-msgid "Enable"
-msgstr "Увімкнути"
-
-msgid "MMC/SD driver configuration"
-msgstr "Конфігурація драйвера MMC/SD"
-
-msgid "Mode"
-msgstr "Режим"
-
-msgid "Name"
-msgstr "Ім'я"
-
-msgid "Settings"
-msgstr "Настройки"
diff --git a/po/uk/multiwan.po b/po/uk/multiwan.po
deleted file mode 100644
index 2c34c3d..0000000
--- a/po/uk/multiwan.po
+++ /dev/null
@@ -1,116 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/uk/ntpc.po b/po/uk/ntpc.po
deleted file mode 100644
index 451f783..0000000
--- a/po/uk/ntpc.po
+++ /dev/null
@@ -1,56 +0,0 @@
-# Generated from applications/luci-ntpc/luasrc/model/cbi/ntpc/*.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-03-18 20:32+0200\n"
-"Last-Translator: YuriPet <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Clock Adjustment"
-msgstr "Коригування годинника"
-
-msgid "Count of time measurements"
-msgstr "Кількість вимірювань часу"
-
-msgid "Current system time"
-msgstr "Поточний системний час"
-
-msgid "General"
-msgstr "Загальне"
-
-msgid "Hostname"
-msgstr "Назва (ім'я) вузла"
-
-msgid "Offset frequency"
-msgstr "Зсув частоти"
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Synchronizes the system time"
-msgstr "Синхронізація системного часу"
-
-msgid "Time Server"
-msgstr "Сервер часу"
-
-msgid "Time Servers"
-msgstr "Сервери часу"
-
-msgid "Time Synchronisation"
-msgstr "Синхронізація часу"
-
-msgid "Update interval (in seconds)"
-msgstr "Інтервал оновлення (в секундах)"
-
-msgid "empty = infinite"
-msgstr "пусто = нескінченно"
diff --git a/po/uk/olsr.po b/po/uk/olsr.po
deleted file mode 100644
index 9f50cbb..0000000
--- a/po/uk/olsr.po
+++ /dev/null
@@ -1,577 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/uk/openvpn.po b/po/uk/openvpn.po
deleted file mode 100644
index 129c596..0000000
--- a/po/uk/openvpn.po
+++ /dev/null
@@ -1,550 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2011-11-30 09:14+0200\n"
-"Last-Translator: Pavel <pavel.gumenyuk@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr "Дозволити обмін трафіком між клієнтами"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Дозволити декілька клієнтів з однаковим сертифікатом"
-
-msgid "Allow only one session"
-msgstr "Дозволити лише одну сесію"
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/uk/p2pblock.po b/po/uk/p2pblock.po
deleted file mode 100644
index bcbd62c..0000000
--- a/po/uk/p2pblock.po
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-12 21:31+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr "секунд"
diff --git a/po/uk/p910nd.po b/po/uk/p910nd.po
deleted file mode 100644
index d9683bc..0000000
--- a/po/uk/p910nd.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-12 21:28+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Bidirectional mode"
-msgstr ""
-
-msgid "Device"
-msgstr "Пристрій"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Перш за все ви повинні встановити пакети, щоб отримати підтримку USB (kmod-"
-"usb-printer) або паралельний порт (kmod-lp)."
-
-msgid "Port"
-msgstr "Порт"
-
-msgid "Settings"
-msgstr "Налаштування"
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr "увімкнути"
-
-msgid "p910nd - Printer server"
-msgstr ""
diff --git a/po/uk/pbx-voicemail.po b/po/uk/pbx-voicemail.po
deleted file mode 100644
index 5654183..0000000
--- a/po/uk/pbx-voicemail.po
+++ /dev/null
@@ -1,89 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/uk/pbx.po b/po/uk/pbx.po
deleted file mode 100644
index dbd0643..0000000
--- a/po/uk/pbx.po
+++ /dev/null
@@ -1,453 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-11 21:26+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr "Ні"
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr "Облікові записи користувачів"
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr "Ім'я користувача"
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr "Так"
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/uk/polipo.po b/po/uk/polipo.po
deleted file mode 100644
index d586abb..0000000
--- a/po/uk/polipo.po
+++ /dev/null
@@ -1,203 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/uk/qos.po b/po/uk/qos.po
deleted file mode 100644
index fb80779..0000000
--- a/po/uk/qos.po
+++ /dev/null
@@ -1,104 +0,0 @@
-# Generated from applications/luci-qos/luasrc/model/cbi/qos/qos.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2010-03-25 22:10+0100\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/uk/radvd.po b/po/uk/radvd.po
deleted file mode 100644
index 8478bf5..0000000
--- a/po/uk/radvd.po
+++ /dev/null
@@ -1,368 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/uk/rrdtool.po b/po/uk/rrdtool.po
deleted file mode 100644
index 5a535f1..0000000
--- a/po/uk/rrdtool.po
+++ /dev/null
@@ -1,357 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/uk/samba.po b/po/uk/samba.po
deleted file mode 100644
index 6f2a920..0000000
--- a/po/uk/samba.po
+++ /dev/null
@@ -1,84 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-03-18 20:35+0200\n"
-"Last-Translator: YuriPet <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Allow guests"
-msgstr "Дозволити гостьовий вхід"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Дозволити користувачам системи досягати своїх домашніх каталогів через "
-"загальні мережеві ресурси"
-
-msgid "Allowed users"
-msgstr "Дозволені користувачі"
-
-msgid "Create mask"
-msgstr "Створити маску"
-
-msgid "Description"
-msgstr "Опис"
-
-msgid "Directory mask"
-msgstr "Маска каталогу"
-
-msgid "Edit Template"
-msgstr "Редагувати шаблон"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-"Редагувати шаблон, який використовується для створення конфігурації samba."
-
-msgid "General Settings"
-msgstr "Загальні настройки"
-
-msgid "Hostname"
-msgstr "Назва (ім'я) вузла"
-
-msgid "Mask for new directories"
-msgstr "Маска для нових каталогів"
-
-msgid "Mask for new files"
-msgstr "Маска для нових файлів"
-
-msgid "Name"
-msgstr "Ім'я"
-
-msgid "Network Shares"
-msgstr "Загальні мережеві ресурси"
-
-msgid "Path"
-msgstr "Шлях"
-
-msgid "Read-only"
-msgstr "Тільки читання"
-
-msgid "Share home-directories"
-msgstr "Спільно використовувати домашні каталоги"
-
-msgid "Shared Directories"
-msgstr "Загальні каталоги"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"Це вміст файлу '/etc/samba/smb.conf.template', з якого буде генеруватися "
-"ваша конфігурація samba. Значення, укладені в символи \"вертикальна риска"
-"\" (\"|\") не повинні змінюватися. Вони отримують свої значення з вкладки "
-"\"Загальні налаштування\"."
-
-msgid "Workgroup"
-msgstr "Робоча група"
diff --git a/po/uk/splash.po b/po/uk/splash.po
deleted file mode 100644
index 859e2ff..0000000
--- a/po/uk/splash.po
+++ /dev/null
@@ -1,309 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/uk/statistics.po b/po/uk/statistics.po
deleted file mode 100644
index daa4af2..0000000
--- a/po/uk/statistics.po
+++ /dev/null
@@ -1,599 +0,0 @@
-#  statistics.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/statistics.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-12 23:50+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Інтерфейси"
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr "Мережа"
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr "Мережевий протокол"
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr "Користувач"
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/uk/tinyproxy.po b/po/uk/tinyproxy.po
deleted file mode 100644
index 2e268ba..0000000
--- a/po/uk/tinyproxy.po
+++ /dev/null
@@ -1,256 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/uk/transmission.po b/po/uk/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/uk/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/uk/upnp.po b/po/uk/upnp.po
deleted file mode 100644
index 187e91f..0000000
--- a/po/uk/upnp.po
+++ /dev/null
@@ -1,145 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/uk/ushare.po b/po/uk/ushare.po
deleted file mode 100644
index 3855d26..0000000
--- a/po/uk/ushare.po
+++ /dev/null
@@ -1,51 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-12 21:20+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "Каталоги даних"
-
-msgid "Disable telnet console"
-msgstr "Вимкнути консоль Telnet"
-
-msgid "Disable webinterface"
-msgstr "Вимкнути веб-інтерфейс"
-
-msgid "Enable"
-msgstr "Увімкнути"
-
-msgid "Interface"
-msgstr "Інтерфейс"
-
-msgid "Options"
-msgstr "Опції"
-
-msgid "Servername"
-msgstr "Ім'я сервера"
-
-msgid "Settings"
-msgstr "Налаштування"
-
-msgid "Username"
-msgstr "Ім'я користувача"
-
-msgid "uShare"
-msgstr "uShare"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/uk/uvc_streamer.po b/po/uk/uvc_streamer.po
deleted file mode 100644
index cea0d70..0000000
--- a/po/uk/uvc_streamer.po
+++ /dev/null
@@ -1,44 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-11 20:25+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "Кадрів в секунду"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "Роздільна здатність"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "Налаштування"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "Транслювання з веб-камери"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"Налаштуйте вашу Linux-UVC сумісну веб-камеру. Вкажіть ваш переглядач(), "
-"наприклад, <a href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/uk/vnstat.po b/po/uk/vnstat.po
deleted file mode 100644
index e9b805a..0000000
--- a/po/uk/vnstat.po
+++ /dev/null
@@ -1,66 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-03-11 20:21+0200\n"
-"Last-Translator: zubr_139 <zubr139@ukr.net>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configuration"
-msgstr "Конфігурація"
-
-msgid "Daily traffic"
-msgstr "Список щоденного трафіку"
-
-msgid "Graphs"
-msgstr "Графіки"
-
-msgid "Hourly traffic"
-msgstr "Список погодинного трафіку"
-
-msgid "Monitor selected interfaces"
-msgstr "Моніторинг обраних інтерфейсів"
-
-msgid "Monthly traffic"
-msgstr "Список щомісячного трафіку"
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-"Не була створена база даних. Перейдіть до вкладки конфігурації VnStat та "
-"увімкніть моніторинг для одного або декількох інтерфейсів."
-
-msgid "Restart VnStat"
-msgstr "Перезапуск VnStat"
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr "Список Топ-10"
-
-msgid "Update »"
-msgstr "Оновлення »"
-
-msgid "VnStat"
-msgstr "VnStat"
-
-msgid "VnStat Graphs"
-msgstr "Графіки VnStat"
-
-msgid "VnStat Traffic Monitor"
-msgstr "Моніторінг трафіку VnStat"
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
-"VnStat - монітор мережного трафіку для Linux, який веде журнал мережевого "
-"трафіку для обраного інтерфейсу або декількох інтерфейсів."
diff --git a/po/uk/voice_core.po b/po/uk/voice_core.po
deleted file mode 100644
index 4886d72..0000000
--- a/po/uk/voice_core.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-12-29 12:56+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr "Телефони"
-
-msgid "Voice"
-msgstr "Голос"
-
-#~ msgid "l_v_adminphones"
-#~ msgstr "l_v_adminphones"
diff --git a/po/uk/voice_diag.po b/po/uk/voice_diag.po
deleted file mode 100644
index 60c55ba..0000000
--- a/po/uk/voice_diag.po
+++ /dev/null
@@ -1,33 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-28 22:05+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Diagnostics"
-msgstr "Діагностика"
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-"Доступність засобів діагностики визначається модулями, які ви встановили."
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
-"Це меню містить опції, які дають вам змогу сконфігурувати й виконати "
-"тестування голосових функцій вашої системи. Інша їх назва - засоби "
-"діагностики."
-
-#~ msgid "l_v_d_admindiag"
-#~ msgstr "l_v_d_admindiag"
diff --git a/po/uk/watchcat.po b/po/uk/watchcat.po
deleted file mode 100644
index 6cf9179..0000000
--- a/po/uk/watchcat.po
+++ /dev/null
@@ -1,54 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/uk/wol.po b/po/uk/wol.po
deleted file mode 100644
index 2d9af29..0000000
--- a/po/uk/wol.po
+++ /dev/null
@@ -1,58 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2012-03-18 20:45+0200\n"
-"Last-Translator: YuriPet <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "Широкомовна трансляція на всіх інтерфейсах"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-"Виберіть комп'ютер, який необхідно розбудити або введіть користувацьку MAC-"
-"адресу"
-
-msgid "Host to wake up"
-msgstr "Комп'ютер, який необхідно розбудити"
-
-msgid "Network interface to use"
-msgstr "Використовувати мережевий інтерфейс"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-"Іноді працює тільки одна з цих двох утиліт. Якщо одна з них не працює, "
-"спробуйте іншу."
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "Визначає інтерфейс, яким буде надіслано пакет WoL"
-
-msgid "Starting WoL utility:"
-msgstr "Запуск WoL-утиліти:"
-
-msgid "Wake on LAN"
-msgstr "Wake on LAN"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-"Wake on LAN є технологією завантаження віддалених комп'ютерів у локальній "
-"мережі."
-
-msgid "Wake up host"
-msgstr "Розбудити комп'ютер"
-
-msgid "WoL program"
-msgstr "Программа WoL"
diff --git a/po/uk/wshaper.po b/po/uk/wshaper.po
deleted file mode 100644
index 6b7bb3f..0000000
--- a/po/uk/wshaper.po
+++ /dev/null
@@ -1,57 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-04-28 21:54+0200\n"
-"Last-Translator: Yurii <yuripet@gmail.com>\n"
-"Language-Team: none\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr "Прямий канал"
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr "Ширина смуги пропускання прямого каналу (кбіт/с)"
-
-msgid "Host or Network in CIDR notation."
-msgstr "Вузол або мережа в нотації CIDR."
-
-msgid "Interface"
-msgstr "Інтерфейс"
-
-msgid "Low priority destination ports"
-msgstr "Низькопріоритетні порти призначення"
-
-msgid "Low priority hosts (Destination)"
-msgstr "Низькопріоритетні вузли призначення"
-
-msgid "Low priority hosts (Source)"
-msgstr "Низькопріоритетні вузли джерела"
-
-msgid "Low priority source ports"
-msgstr "Низькопріоритетні порти джерела"
-
-msgid "Uplink"
-msgstr "Зворотній канал"
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr "Ширина смуги пропускання зворотного каналу (кбіт/c)"
-
-msgid "Wondershaper"
-msgstr "Wondershaper"
-
-msgid "Wondershaper settings"
-msgstr "Налаштування Wondershaper"
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
-"Wondershaper використовує формування трафіку для забезпечення низької "
-"затримки інтерактивного трафіку, навіть якщо ваше з'єднання з інтернетом "
-"дуже насичене."
diff --git a/po/vi/ahcp.po b/po/vi/ahcp.po
deleted file mode 100644
index ffb7865..0000000
--- a/po/vi/ahcp.po
+++ /dev/null
@@ -1,106 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "AHCP Server"
-msgstr ""
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Lease directory"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Served interfaces"
-msgstr ""
-
-msgid "Server"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "Unique ID file"
-msgstr ""
diff --git a/po/vi/asterisk.po b/po/vi/asterisk.po
deleted file mode 100644
index d1cc6b2..0000000
--- a/po/vi/asterisk.po
+++ /dev/null
@@ -1,680 +0,0 @@
-#  asterisk.pot
-#  generated from ./applications/luci-asterisk/luasrc/i18n/asterisk.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-16 08:36+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Asterisk những tùy chọn căn bản"
-
-#~ msgid "AGI directory"
-#~ msgstr "Thư mục AGI"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "Cache ghi lại tập tin âm thanh trong suốt qua trình recording"
-
-#~ msgid "Debug Level"
-#~ msgstr "Debug Level"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "Vô hiệu hóa một số cảnh báo"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "Dump core on crash"
-
-#~ msgid "High Priority"
-#~ msgstr "High Priority"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "Initialise Crypto"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "Sử dụng thời gian nội bộ"
-
-#~ msgid "Log directory"
-#~ msgstr "Thư mục log"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "Số lượng cuộc gọi tối đa cho phép"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "Mức độ tải tối đa để ngừng thu nhận cuộc gọi mới"
-
-#~ msgid "Disable console colors"
-#~ msgstr "Vô hiệu hóa bản điều khiển màu sắc"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "Thư mục sound files cache"
-
-#~ msgid "The Group to run as"
-#~ msgstr "Nhóm vận hành như"
-
-#~ msgid "The User to run as"
-#~ msgstr "Người sử dụng vận hành như"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "Thư mục Voicemail Spool "
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "Tiền tố UniquID với tên hệ thống"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "Xây dựng đừng dẫn transcode via SLINEAR, không trực tiếp"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "Truyền SLINEAR silence trong khi recording một channel"
-
-#~ msgid "Verbose Level"
-#~ msgstr "Verbose Level"
-
-#~ msgid "Section dialplan"
-#~ msgstr "Section dialplan"
-
-#~ msgid "include"
-#~ msgstr "bao gồm"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "Dialplan Extension"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "Dialplan tùy chọn tổng quát"
-
-#~ msgid "Allow transfer"
-#~ msgstr "Cho phép chuyển đổi"
-
-#~ msgid "Clear global vars"
-#~ msgstr "Xóa global vars"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "Dialplan Goto"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "Dialplan Conference"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "Dialplan Time"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "Dialplan Voicemail"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "Dial Zones cho Dialplan"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "Tiền tố để thêm vào matching dialplans"
-
-#~ msgid "Match International prefix"
-#~ msgstr "Match tiền tố quốc tê"
-
-#~ msgid "Prefix (0) to add/remove to/from international numbers"
-#~ msgstr "Tiền tố để thêm vào/ bỏ ra/ từ số gọi quốc tế"
-
-#~ msgid "localzone"
-#~ msgstr "vùng địa phương"
-
-#~ msgid "Match plan"
-#~ msgstr "Match plan"
-
-#~ msgid "Connection to use"
-#~ msgstr "Kết nối sử dụng"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "Bản đồ phím tính năng"
-
-#~ msgid "Attended transfer key"
-#~ msgstr "Attended transfer key"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "phím chuyển đổi ẩn"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "phím để vô hiệu hóa cuộc gọi"
-
-#~ msgid "Key to Park call"
-#~ msgstr "phím để định vị cuộc gọi"
-
-#~ msgid "Parking Feature"
-#~ msgstr "Tính năng định vị"
-
-#~ msgid "ADSI Park"
-#~ msgstr "định vị ADSI"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "Attended transfer timeout (sec)"
-
-#~ msgid "One touch record key"
-#~ msgstr "Phím thu chạm một lần"
-
-#~ msgid "Name of call context for parking"
-#~ msgstr "Tên của call context cho parking"
-
-#~ msgid "Sound file to play to parked caller"
-#~ msgstr "Tập tin âm thanh để play to parked caller"
-
-#~ msgid "Max time (ms) between digits for feature activation"
-#~ msgstr "Thời gian tối đa (ms) giữa các digits cho feature activation"
-
-#~ msgid "Method to Find Parking slot"
-#~ msgstr "Phương pháp tìm điểm định vị"
-
-#~ msgid "parkedmusicclass"
-#~ msgstr "parkedmusicclass"
-
-#~ msgid "Play courtesy tone to"
-#~ msgstr "Play courtesy tone để"
-
-#~ msgid "Enable Parking"
-#~ msgstr "cho phép định vị"
-
-#~ msgid "Extension to dial to park"
-#~ msgstr "nhanh số để gọi để định vị"
-
-#~ msgid "Parking time (secs)"
-#~ msgstr "Thời gian định vị"
-
-#~ msgid "Range of extensions for call parking"
-#~ msgstr "Vùng của đuôi mở rộng cho call parking"
-
-#~ msgid "Pickup extension"
-#~ msgstr "Pickup extension"
-
-#~ msgid "Seconds to wait bewteen digits when transferring"
-#~ msgstr "Thời gian chờ giữa những chữ số khi chuyển đổi"
-
-#~ msgid "sound when attended transfer is complete"
-#~ msgstr "âm thanh khi chuyển đổi hoàn tất"
-
-#~ msgid "Sound when attended transfer fails"
-#~ msgstr "âm thanh khi chuyển đổi không thành công"
-
-#~ msgid "Reload Hardware Config"
-#~ msgstr "Tải lại cấu hình phần cứng"
-
-#~ msgid "Reboot Method"
-#~ msgstr "phương pháp khởi động lại"
-
-#~ msgid "Parameter"
-#~ msgstr "Tham số"
-
-#~ msgid "Option type"
-#~ msgstr "Lựa chọn"
-
-#~ msgid "User name"
-#~ msgstr "Tên người dùng"
-
-#~ msgid "IAX General Options"
-#~ msgstr "Những lựa chọn tổng quát IAX"
-
-#~ msgid "Allow Codecs"
-#~ msgstr "Cho phép Codecs"
-
-#~ msgid "Static"
-#~ msgstr "Tĩnh"
-
-#~ msgid "Write Protect"
-#~ msgstr "Viết bảo vệ"
-
-#~ msgid "Meetme Conference"
-#~ msgstr "Gặp mặt thảo luận"
-
-#~ msgid "Admin PIN"
-#~ msgstr "PIN quản trị"
-
-#~ msgid "Meeting PIN"
-#~ msgstr "PIN cuộc gặp"
-
-#~ msgid "Meetme Conference General Options"
-#~ msgstr "Lựu chọn chung về thảo luận trực tiếp"
-
-#~ msgid "Number of 20ms audio buffers to be used"
-#~ msgstr "Số của 20ms audio buffers để được dùng"
-
-#~ msgid "Modules"
-#~ msgstr "Modules"
-
-#~ msgid "Alarm Receiver Application"
-#~ msgstr "Ứng dụng nhận báo thức"
-
-#~ msgid "Authentication Application"
-#~ msgstr "Ứng dụng xác thực"
-
-#~ msgid "Make sure asterisk doesnt save CDR"
-#~ msgstr "Bảo đảm asterisk không lưu CDR"
-
-#~ msgid "Check if channel is available"
-#~ msgstr "Kiểm tra xem nếu kênh đã có sẵn"
-
-#~ msgid "Listen in on any channel"
-#~ msgstr "Nghe trên bất kỳ kênh nào"
-
-#~ msgid "Control Playback Application"
-#~ msgstr "Điều khiển ứng dụng phát lại"
-
-#~ msgid "Cuts up variables"
-#~ msgstr "Cuts up variables"
-
-#~ msgid "Database access functions"
-#~ msgstr "Chức năng truy cập cơ sở dữ liệu"
-
-#~ msgid "Dialing Application"
-#~ msgstr "Ứng dụng quay số"
-
-#~ msgid "Virtual Dictation Machine Application"
-#~ msgstr "Ứng dụng virtual Dictation Machine "
-
-#~ msgid "Directed Call Pickup Support"
-#~ msgstr "Directed hỗ trợ call pickup"
-
-#~ msgid "Extension Directory"
-#~ msgstr "Danh bạ nhánh số"
-
-#~ msgid "DISA (Direct Inward System Access) Application"
-#~ msgstr "Ứng dụng DISA (Direct Inward System Access) "
-
-#~ msgid "Dump channel variables Application"
-#~ msgstr "Dump channel variables Application"
-
-#~ msgid "Simple Echo Application"
-#~ msgstr "Ứng dụng Echo đơn giản"
-
-#~ msgid "ENUM Lookup"
-#~ msgstr "ENUM tra cứu"
-
-#~ msgid "Reevaluates strings"
-#~ msgstr "Đánh giá lại strings"
-
-#~ msgid "Executes applications"
-#~ msgstr "thực thi ứng dụng"
-
-#~ msgid "External IVR application interface"
-#~ msgstr "Ứng dụng giao diện bên ngoài IVR"
-
-#~ msgid "Fork The CDR into 2 seperate entities"
-#~ msgstr "Fork The CDR into 2 nhân riêng biệt"
-
-#~ msgid "Get ADSI CPE ID"
-#~ msgstr "Lấy ADSI CPE ID"
-
-#~ msgid "Group Management Routines"
-#~ msgstr "Group Management Routines"
-
-#~ msgid "Encode and Stream via icecast and ices"
-#~ msgstr "Encode và Stream via icecast và ices"
-
-#~ msgid "Image Transmission Application"
-#~ msgstr "Ứng dụng truyền hình ảnh"
-
-#~ msgid "Look up Caller*ID name/number from black"
-#~ msgstr "Tra cứu tên/số của người gọi"
-
-#~ msgid "Look up CallerID Name from local databas"
-#~ msgstr "Tra cứu tên người gọi từ cơ sở dữ liệu địa phương"
-
-#~ msgid "Extension Macros"
-#~ msgstr "Nhánh số Macro"
-
-#~ msgid "A simple math Application"
-#~ msgstr "Ứng dụng tính toán đơn giản"
-
-#~ msgid "MD5 checksum Application"
-#~ msgstr "Ứng dụng MD5 checksum "
-
-#~ msgid "Digital Milliwatt (mu-law) Test Application"
-#~ msgstr "Ứng dụng kiểm tra Digital Milliwatt (mu-law) "
-
-#~ msgid "Record a call and mix the audio during the recording"
-#~ msgstr "Thu âm cuộc gọi và phối âm trong khi thu"
-
-#~ msgid "Call Parking and Announce Application"
-#~ msgstr "Định vị cuộc gọi và ứng dụng thông báo"
-
-#~ msgid "Trivial Playback Application"
-#~ msgstr "Ứng dụng trivial Playback "
-
-#~ msgid "Require phone number to be entered"
-#~ msgstr "Yêu cầu nhập số điện thoại"
-
-#~ msgid "True Call Queueing"
-#~ msgstr "True Call Queueing"
-
-#~ msgid "Random goto"
-#~ msgstr "Random goto"
-
-#~ msgid "Read Variable Application"
-#~ msgstr "Ứng dụng đọc variable "
-
-#~ msgid "Read in a file"
-#~ msgstr "Đọc trong một tập tin"
-
-#~ msgid "Realtime Data Lookup/Rewrite"
-#~ msgstr "Tra cứu dữ liệu đúng lúc/ Viết lại"
-
-#~ msgid "Trivial Record Application"
-#~ msgstr "Ứng dụng trivial record"
-
-#~ msgid "Say time"
-#~ msgstr "Nói thời gian"
-
-#~ msgid "Send DTMF digits Application"
-#~ msgstr "Ứng dụng gửi những chữ số DTMF"
-
-#~ msgid "Send Text Applications"
-#~ msgstr "Gửi ứng dụng tin nhắn"
-
-#~ msgid "Set CallerID Application"
-#~ msgstr "Ứng dụng cài đặt định dạng cuộc gọi"
-
-#~ msgid "CDR user field apps"
-#~ msgstr "CDR user field apps"
-
-#~ msgid "load => .so ; Set CallerID Name"
-#~ msgstr "load =&amp;gt; .so ; Đặt tên CallerID "
-
-#~ msgid "load => .so ; Set CallerID Number"
-#~ msgstr "load =&amp;gt; .so ; Đặt số CallerID "
-
-#~ msgid "Set RDNIS Number"
-#~ msgstr "Cài đặt số RDNIS"
-
-#~ msgid "Set ISDN Transfer Capability"
-#~ msgstr "Cài đặt công suất truyền tải ISDN"
-
-#~ msgid "SMS/PSTN handler"
-#~ msgstr "SMS/PSTN handler"
-
-#~ msgid "Hangs up the requested channel"
-#~ msgstr "Bãi bỏ kênh yêu cầu"
-
-#~ msgid "Stack Routines"
-#~ msgstr "Ngăn xếp Routines"
-
-#~ msgid "Generic System() application"
-#~ msgstr "Ứng dụng Genetic System"
-
-#~ msgid "Playback with Talk Detection"
-#~ msgstr "Playback với bộ phát hiện tiếng nói"
-
-#~ msgid "Interface Test Application"
-#~ msgstr "Ứng dụng kiểm tra giao diện"
-
-#~ msgid "Transfer"
-#~ msgstr "truyền tải"
-
-#~ msgid "TXTCIDName"
-#~ msgstr "TXTCIDName"
-
-#~ msgid "Send URL Applications"
-#~ msgstr "Gửi những ứng dụng URL"
-
-#~ msgid "Custom User Event Application"
-#~ msgstr "Ứng dụng Custom User Event "
-
-#~ msgid "Send verbose output"
-#~ msgstr "Gửi verbose output"
-
-#~ msgid "Voicemail"
-#~ msgstr "Thư thoại"
-
-#~ msgid "Waits until first ring after time"
-#~ msgstr "Đợi tới tiếng ring đầu tiên sau khi"
-
-#~ msgid "Wait For Silence Application"
-#~ msgstr "Đợi ứng dụng im lặng"
-
-#~ msgid "While Loops and Conditional Execution"
-#~ msgstr "Trong khi Loops và Conditional Execution"
-
-#~ msgid "Comma Separated Values CDR Backend"
-#~ msgstr "Comma Separated Values CDR Backend"
-
-#~ msgid "Customizable Comma Separated Values CDR Backend"
-#~ msgstr "Tùy chỉnh Comma Separated Values CDR Backend"
-
-#~ msgid "Asterisk Call Manager CDR Backend"
-#~ msgstr "Asterisk Call Manager CDR Backend"
-
-#~ msgid "MySQL CDR Backend"
-#~ msgstr "MySQL CDR Backend"
-
-#~ msgid "PostgreSQL CDR Backend"
-#~ msgstr "PostgreSQL CDR Backend"
-
-#~ msgid "SQLite CDR Backend"
-#~ msgstr "SQLite CDR Backend"
-
-#~ msgid "Agent Proxy Channel"
-#~ msgstr "Agent Proxy Channel"
-
-#~ msgid "Option chan_iax2"
-#~ msgstr "Tùy chọn chan_iax2"
-
-#~ msgid "Local Proxy Channel"
-#~ msgstr "Local Proxy Channel"
-
-#~ msgid "Session Initiation Protocol (SIP)"
-#~ msgstr "Session Initiation Protocol (SIP)"
-
-#~ msgid "Adaptive Differential PCM Coder/Decoder"
-#~ msgstr "Adaptive Differential PCM Coder/Decoder"
-
-#~ msgid "A-law Coder/Decoder"
-#~ msgstr "A-law Coder/Decoder"
-
-#~ msgid "A-law and Mulaw direct Coder/Decoder"
-#~ msgstr "A-law and Mulaw direct Coder/Decoder"
-
-#~ msgid "ITU G.726-32kbps G726 Transcoder"
-#~ msgstr "ITU G.726-32kbps G726 Transcoder"
-
-#~ msgid "GSM/PCM16 (signed linear) Codec Translation"
-#~ msgstr "GSM/PCM16 (signed linear) Codec Translation"
-
-#~ msgid "Speex/PCM16 (signed linear) Codec Translator"
-#~ msgstr "Speex/PCM16 (signed linear) Codec Translator"
-
-#~ msgid "Mu-law Coder/Decoder"
-#~ msgstr "Mu-law Coder/Decoder"
-
-#~ msgid "Sun Microsystems AU format (signed linear)"
-#~ msgstr "Sun Microsystems AU format (signed linear)"
-
-#~ msgid "G.723.1 Simple Timestamp File Format"
-#~ msgstr "G.723.1 Simple Timestamp File Format"
-
-#~ msgid "Raw G.726 (16/24/32/40kbps) data"
-#~ msgstr "Raw G.726 (16/24/32/40kbps) data"
-
-#~ msgid "Raw G729 data"
-#~ msgstr "Raw G729 data"
-
-#~ msgid "Raw GSM data"
-#~ msgstr "Raw GSM data"
-
-#~ msgid "Raw h263 data"
-#~ msgstr "Raw h263 data"
-
-#~ msgid "JPEG (Joint Picture Experts Group) Image"
-#~ msgstr "JPEG (Joint Picture Experts Group) Image"
-
-#~ msgid "Raw uLaw 8khz Audio support (PCM)"
-#~ msgstr "Raw uLaw 8khz Audio support (PCM)"
-
-#~ msgid "load => .so ; Raw aLaw 8khz PCM Audio support"
-#~ msgstr "load =&amp;gt; .so ; Raw aLaw 8khz PCM Audio support"
-
-#~ msgid "Raw Signed Linear Audio support (SLN)"
-#~ msgstr "Raw Signed Linear Audio support (SLN)"
-
-#~ msgid "Dialogic VOX (ADPCM) File Format"
-#~ msgstr "Dialogic VOX (ADPCM) File Format"
-
-#~ msgid "Microsoft WAV format (8000hz Signed Line"
-#~ msgstr "Microsoft WAV format (8000hz Signed Line"
-
-#~ msgid "Microsoft WAV format (Proprietary GSM)"
-#~ msgstr "Microsoft WAV format (Proprietary GSM)"
-
-#~ msgid "Caller ID related dialplan functions"
-#~ msgstr "Caller ID liên quan đến chức năng dialplan "
-
-#~ msgid "ENUM Functions"
-#~ msgstr "chức năng ENUM"
-
-#~ msgid "URI encoding / decoding functions"
-#~ msgstr "Chức năng URI encoding / decoding "
-
-#~ msgid "Asterisk Extension Language Compiler"
-#~ msgstr "Asterisk Extension Language Compiler"
-
-#~ msgid "Text Extension Configuration"
-#~ msgstr "Cấu hình Text Extension "
-
-#~ msgid "load => .so ; Builtin dialplan functions"
-#~ msgstr "load =&amp;gt; .so ; chức năng Builtin dialplan "
-
-#~ msgid "Loopback Switch"
-#~ msgstr "Loopback Switch"
-
-#~ msgid "Realtime Switch"
-#~ msgstr "Realtime Switch"
-
-#~ msgid "Outgoing Spool Support"
-#~ msgstr "Hỗ trợ outgoing spool"
-
-#~ msgid "Wil Cal U (Auto Dialer)"
-#~ msgstr "Wil Cal U (Auto Dialer)"
-
-#~ msgid "MySQL Config Resource"
-#~ msgstr "MySQL Config Resource"
-
-#~ msgid "ODBC Config Resource"
-#~ msgstr "ODBC Config Resource"
-
-#~ msgid "PGSQL Module"
-#~ msgstr "PGSQL Module"
-
-#~ msgid "Cryptographic Digital Signatures"
-#~ msgstr "Cryptographic Digital Signatures"
-
-#~ msgid "Call Parking Resource"
-#~ msgstr "Call Parking Resource"
-
-#~ msgid "Indications Configuration"
-#~ msgstr "Cấu hình indications"
-
-#~ msgid "Call Monitoring Resource"
-#~ msgstr "Call Monitoring Resource"
-
-#~ msgid "Music On Hold Resource"
-#~ msgstr "Music On Hold Resource"
-
-#~ msgid "ODBC Resource"
-#~ msgstr "ODBC Resource"
-
-#~ msgid "SMDI Module"
-#~ msgstr "SMDI Module"
-
-#~ msgid "SNMP Module"
-#~ msgstr "SNMP Module"
-
-#~ msgid "Music On Hold"
-#~ msgstr "Music On Hold"
-
-#~ msgid "Application"
-#~ msgstr "Ứng dụng"
-
-#~ msgid "Directory of Music"
-#~ msgstr "Thư mục music"
-
-#~ msgid "Option mode"
-#~ msgstr "Chế độ tùy chọn"
-
-#~ msgid "Random Play"
-#~ msgstr "Random Play"
-
-#~ msgid "DTMF mode"
-#~ msgstr "chế độ DTMF"
-
-#~ msgid "Primary domain identity for From: headers"
-#~ msgstr "Nhận dạng primary domain cho From: headers"
-
-#~ msgid "From user (required by many SIP providers)"
-#~ msgstr "Từ user (yêu cầu bởi nhiều nhà cung cấp SIP)"
-
-#~ msgid "Ring on incoming dialplan contexts"
-#~ msgstr "Ring on incoming dialplan contexts"
-
-#~ msgid "Allow Insecure for"
-#~ msgstr "Cho phép không an toàn cho"
-
-#~ msgid "Mailbox for MWI"
-#~ msgstr "Hộp thư cho MWI"
-
-#~ msgid "NAT between phone and Asterisk"
-#~ msgstr "NAT giữa điện thoại và Asterisk"
-
-#~ msgid "Check tags in headers"
-#~ msgstr "Kiểm tra tags trong headers"
-
-#~ msgid "Reply Timeout (ms) for down connection"
-#~ msgstr "Trả lời Timeout (ms) cho down kết nối"
-
-#~ msgid "Register connection"
-#~ msgstr "Đăng ký kết nối"
-
-#~ msgid "Dial own extension for mailbox"
-#~ msgstr "Gọi nhánh số cho hộp thư"
-
-#~ msgid "Client Type"
-#~ msgstr "Loại Client"
-
-#~ msgid "Username"
-#~ msgstr "Username"
-
-#~ msgid "Section sipgeneral"
-#~ msgstr "Section sipgeneral"
-
-#~ msgid "Allow codecs"
-#~ msgstr "Cho phép Codecs"
-
-#~ msgid "SIP realm"
-#~ msgstr "SIP realm"
-
-#~ msgid "Voicemail general options"
-#~ msgstr "Thư thoại tùy chọn tổng quát"
-
-#~ msgid "From Email address of server"
-#~ msgstr "Từ địa chỉ email của server"
-
-#~ msgid "Voice Mail boxes"
-#~ msgstr "Hộp thư thoại"
-
-#~ msgid "Email contains attachment"
-#~ msgstr "Email bao gồm attachment"
-
-#~ msgid "Email"
-#~ msgstr "Email"
-
-#~ msgid "Display Name"
-#~ msgstr "Tên display"
-
-#~ msgid "Password"
-#~ msgstr "Mật khẩu"
-
-#~ msgid "zone"
-#~ msgstr "zone"
-
-#~ msgid "Voice Zone settings"
-#~ msgstr "Cài đặt voice zone"
-
-#~ msgid "Message Format"
-#~ msgstr "Message Format"
diff --git a/po/vi/base.po b/po/vi/base.po
deleted file mode 100644
index 32d5ddb..0000000
--- a/po/vi/base.po
+++ /dev/null
@@ -1,3565 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:59+0200\n"
-"PO-Revision-Date: 2009-08-14 12:23+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-#, fuzzy
-msgid "(%s available)"
-msgstr "(%s available)"
-
-msgid "(empty)"
-msgstr ""
-
-msgid "(no interfaces attached)"
-msgstr ""
-
-msgid "-- Additional Field --"
-msgstr "---Mục bổ sung---"
-
-msgid "-- Please choose --"
-msgstr "--Hãy chọn--"
-
-msgid "-- custom --"
-msgstr "--tùy chỉnh--"
-
-msgid "1 Minute Load:"
-msgstr ""
-
-msgid "15 Minute Load:"
-msgstr ""
-
-msgid "40MHz 2nd channel above"
-msgstr ""
-
-msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr ""
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Dịch vụ căn bản đặt Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Mở rộng dịch vụ đặt Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr "Hỗ trợ AR"
-
-msgid "ARP retry threshold"
-msgstr ""
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr "Điểm truy cập"
-
-msgid "Action"
-msgstr "Action"
-
-msgid "Actions"
-msgstr "Hành động"
-
-msgid "Activate this network"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-
-msgid "Active Connections"
-msgstr "kết nối đang hoạt động"
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr "Ad-Hoc"
-
-msgid "Add"
-msgstr "Thêm vào"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr ""
-
-msgid "Additional Hosts files"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr "Quản trị"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Advertise IPv6 on network"
-msgstr ""
-
-msgid "Advertised network ID"
-msgstr ""
-
-msgid "Alert"
-msgstr ""
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "Cho phép <abbr title=\"Secure Shell\">SSH</abbr> xác thực mật mã"
-
-msgid "Allow all except listed"
-msgstr "Cho phép tất cả trừ danh sách liệt kê"
-
-msgid "Allow listed only"
-msgstr "Chỉ cho phép danh sách liệt kê"
-
-msgid "Allow localhost"
-msgstr ""
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr ""
-
-msgid "Antenna 2"
-msgstr ""
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr "Áp dụng"
-
-msgid "Applying changes"
-msgstr "Tiến hành thay đổi"
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr ""
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr "Xác thực"
-
-msgid "Authoritative"
-msgstr "Authoritative"
-
-msgid "Authorization Required"
-msgstr "Yêu cầu ủy quyền"
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr "Sẵn có"
-
-msgid "Available packages"
-msgstr ""
-
-msgid "Average:"
-msgstr ""
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr ""
-
-msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
-
-msgid "Back to scan results"
-msgstr ""
-
-msgid "Background Scan"
-msgstr "Background Scan"
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr "Backup/ Restore"
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr ""
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr ""
-
-msgid "Bridge interfaces"
-msgstr "Giao diện cầu nối"
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr ""
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr "CPU usage (%)"
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr "Bỏ qua"
-
-msgid "Chain"
-msgstr "chuỗi"
-
-msgid "Changes"
-msgstr "Thay đổi"
-
-msgid "Changes applied."
-msgstr "Thay đổi đã áp dụng"
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-
-msgid "Channel"
-msgstr "Kênh"
-
-msgid "Check"
-msgstr ""
-
-msgid "Checksum"
-msgstr "Checksum"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr "Giao diện này chưa thuộc về bất kỳ firewall zone nào."
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr "Client"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr "Lệnh"
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr "Sức nén"
-
-msgid "Configuration"
-msgstr "Cấu hình"
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr "Xác nhận"
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr "Giới hạn kết nối"
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr "Mã quốc gia"
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr "Tạo/ gán firewall-zone"
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-"Tùy chỉnh chế độ của thiết bị <abbr title=\"Light Emitting Diode\">LED</"
-"abbr>s nếu có thể."
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr "Tùy chọn DHCP"
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr "Xóa"
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr "Mô tả"
-
-msgid "Design"
-msgstr "Thiết kế"
-
-msgid "Destination"
-msgstr "Điểm đến"
-
-msgid "Device"
-msgstr "Công cụ"
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr "Vô hiệu hóa bộ chỉnh giờ HW-Beacon"
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr "Khoảng cách tối ưu"
-
-msgid "Distance to farthest network member in meters."
-msgstr "Khoảng cách tới thành viên xa nhất trong mạng lưới tính bằng mét"
-
-msgid "Diversity"
-msgstr "Tính đa dạng"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-"Dnsmasq là một phối hợp  <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr "Không gửi nhắc hồi đáp"
-
-msgid "Domain required"
-msgstr "Domain yêu cầu"
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-"Don&amp;#39;t chuyển tiếp <abbr title=\"Hệ thống tên miền\">DNS</abbr>-Yêu "
-"cầu không cần <abbr title=\"Hệ thống tên miền\">DNS</abbr>-Tên"
-
-msgid "Download and install package"
-msgstr "Tải và cài đặt gói"
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear cung cấp <abbr title=\"Secure Shell\">SSH</abbr> mạng lưới shell "
-"truy cập và một <abbr title=\"Secure Copy\">SCP</abbr> server tích hợp"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-"Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr "EAP-Method"
-
-msgid "Edit"
-msgstr "Chỉnh sửa"
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "Kích hoạt <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr "Cho kích hoạt/ Vô hiệu hóa"
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "Kích hoạt Spanning Tree Protocol trên cầu nối này"
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr "Encryption"
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr "Lỗi"
-
-msgid "Ethernet Adapter"
-msgstr "Bộ tương hợp ethernet"
-
-msgid "Ethernet Switch"
-msgstr "Bộ chuyển đảo ethernet"
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr "Khung nhanh"
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr "Tập tin hệ thống"
-
-msgid "Filter"
-msgstr "Lọc"
-
-msgid "Filter private"
-msgstr "Filter private"
-
-msgid "Filter useless"
-msgstr "Lọc không hữu dụng"
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr "Tìm gói"
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr ""
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr "Cờ"
-
-msgid "Flash Firmware"
-msgstr "Phần cứng flash"
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr "Force"
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr "Ngưỡng cửa Phân đoạn"
-
-msgid "Frame Bursting"
-msgstr "Khung nổ"
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr "Tần số Hopping"
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr "Đi tới trang cấu hình thích hợp"
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr "Hang Up"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-"Ở đây bạn có thể cấu hình những đặc tính cơ bản của thiết bị như tên máy chủ "
-"hoặc múi giờ."
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "Giấu <abbr title=\"Chế độ mở rộng đặt Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "Host entries"
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-
-msgid "Hostname"
-msgstr "Tên host"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr "Tên host"
-
-msgid "IP address"
-msgstr "Địa chỉ IP"
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr "Nhận dạng"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-"Nếu bộ nhớ vật lý không đủ dữ liệu không dùng có thể được swap tạm thời đến "
-"một thiết bị swap để tạo ra nhiều khoảng trống hơn trong <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Hãy nhận biết rằng swapping dữ liệu là "
-"một quá trình rất chậm vì một thiết bị swap không thể được truy cập với  "
-"datarates cao hơn của <abbr title=\"Random Access Memory\">RAM</abbr>."
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr "Lờ đi giao diện"
-
-msgid "Ignore resolve file"
-msgstr "Lờ đi tập tin resolve"
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr "Trong"
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr "Initscript"
-
-msgid "Initscripts"
-msgstr "Initscripts"
-
-msgid "Install"
-msgstr "Cài đặt "
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr "Giao diện "
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr "Giao diện "
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr "Giá trị nhập vào không hợp lí"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "Tên và mật mã không đúng. Xin thử lại "
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-"Dường như bạn cố gắng flash một hình ảnh không phù hợp với bộ nhớ flash, xin "
-"vui lòng xác minh các tập tin hình ảnh!"
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr "Kernel Log"
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr "Phím "
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr "Kill"
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr "Ngôn ngữ"
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr "Leasefile"
-
-msgid "Leasetime"
-msgstr "Leasetime"
-
-msgid "Leasetime remaining"
-msgstr "Leasetime còn lại"
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr "Giới hạn "
-
-msgid "Link On"
-msgstr "Link On"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr "Tải "
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr "Giờ địa phương"
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr "Tra vấn địa phương"
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr "Bản ghi tra vấn"
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr "Đăng nhập "
-
-msgid "Logout"
-msgstr "Thoát ra"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr "Lọc địa chỉ MAC"
-
-msgid "MAC-Filter"
-msgstr "Lọc MAC"
-
-msgid "MAC-List"
-msgstr "Danh sách MAC"
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr "Mức cao nhất"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr "Mức cao nhất"
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr "Bộ nhớ"
-
-msgid "Memory usage (%)"
-msgstr "Memory usage (%)"
-
-msgid "Metric"
-msgstr "Metric"
-
-msgid "Minimum Rate"
-msgstr "Mức thấp nhất"
-
-msgid "Minimum hold time"
-msgstr "Mức thấp nhất"
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr "Chế độ"
-
-msgid "Modem device"
-msgstr "Thiết bị modem"
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr "Monitor"
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr "Lắp điểm"
-
-msgid "Mount Points"
-msgstr "Lắp điểm"
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-"Số điểm lắp xác định tại một điểm mà ở đó bộ nhớ sẽ được gắn vào hệ thống "
-"tập tin"
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr "Lắp tập tin hệ thống"
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr "Multicast Rate"
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr "Tên"
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr "Sự điều hướng"
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr "mạng lưới "
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr "Không có chuỗi trong bảng này"
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr "Không có quy luật trong chuỗi này"
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr "OK "
-
-msgid "OPKG-Configuration"
-msgstr "Cấu hình OPKG-"
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-"Trên trang này bạn có thể định cấu hình giao diện network. Bạn có thể bắt "
-"cầu nhiều giao diện bằng cách đánh dấu &amp;quot;bridge interfaces&amp;quot; "
-"field và nhập tên vào của nhiều giao diện network phân tách bởi những khoảng "
-"trống. Bạn có thể cũng dùng <abbr title=\"Virtual Local Area Network\">VLAN</"
-"abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e."
-"g.</abbr>: <samp>eth0.1</samp>)."
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr "Lựa chọn "
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr "Ra khỏi"
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr "Kênh ngoại mạng"
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr "Nhìn chung"
-
-msgid "Owner"
-msgstr "Owner"
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr "PPPoA Encapsulation"
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr "Tên gói"
-
-msgid "Packets"
-msgstr "Gói tin"
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr "Mật mã"
-
-msgid "Password authentication"
-msgstr "Xác thực mật mã"
-
-msgid "Password of Private Key"
-msgstr "Mật mã của private key"
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr "Đường dẫn tới CA-Certificate"
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr "Đường dẫn tới private key"
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr "Tiến hành reboot"
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr "Cài đặt căn bản"
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr "Nhập tên và mật mã"
-
-msgid "Please wait: Device rebooting..."
-msgstr "Xin chờ: Công cụ đang reboot"
-
-msgid "Policy"
-msgstr "Chính sách"
-
-msgid "Port"
-msgstr "Cửa "
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr "Ngăn chặn giao tiếp giữa client-và-client"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr "Proceed"
-
-msgid "Processes"
-msgstr "Processes"
-
-msgid "Prot."
-msgstr "Prot."
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "Pseudo Ad-Hoc (ahdemo)"
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS Threshold"
-
-msgid "RX"
-msgstr "RX"
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"Đọc <code>/etc/ethers</code> để định cấu hình <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr "Reboot"
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr "Reboots hệ điều hành của công cụ"
-
-msgid "Receive"
-msgstr "Receive"
-
-msgid "Receiver Antenna"
-msgstr "Máy thu Antenna"
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr "Tham chiếu"
-
-msgid "Regulatory Domain"
-msgstr "Miền điều chỉnh"
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr "Loại bỏ"
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr "thay đổi nội dung"
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr "Reset"
-
-msgid "Reset Counters"
-msgstr "Reset bộ đếm"
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr "Khởi động lại Firewall"
-
-msgid "Restore backup"
-msgstr "Phục hồi backup"
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr "Revert"
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr "Routes"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-"Routes chỉ định trên giao diện và cổng một host nhất định hay network được "
-"tiếp cận."
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "Lưu"
-
-msgid "Save & Apply"
-msgstr "Lưu & áp dụng "
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr "Scan"
-
-msgid "Scheduled Tasks"
-msgstr "Scheduled Tasks"
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr "Cô lập đối tượng"
-
-msgid "Separate WDS"
-msgstr "Phân tách WDS"
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr "Dịch vụ "
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr "Dung lượng "
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr "Nhảy tới nội dung"
-
-msgid "Skip to navigation"
-msgstr "Chuyển đến mục định hướng"
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr "Phần mềm"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr "Nguồn"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr "Bắt đầu "
-
-msgid "Start priority"
-msgstr "Bắt đầu ưu tiên"
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr "Static IPv4 Routes"
-
-msgid "Static IPv6 Routes"
-msgstr "Static IPv6 Routes"
-
-msgid "Static Leases"
-msgstr "Thống kê leases"
-
-msgid "Static Routes"
-msgstr "Static Routes"
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr "Tình trạng"
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr "Yêu cầu nghiêm ngặt"
-
-msgid "Submit"
-msgstr "Trình "
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr "chuyển đổi"
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr "Hệ thống"
-
-msgid "System Log"
-msgstr "System Log"
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr "TX"
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr "Bảng"
-
-msgid "Target"
-msgstr "Đích"
-
-msgid "Terminate"
-msgstr "Terminate"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"Tập tin công cụ của bộ nhớ hoặc phân vùng (<abbr title=\"Ví dụ\">e.g.</abbr> "
-"<code>/dev/sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"Filesystem mà được dùng để format memory (<abbr title=\"for example\">e.g.</"
-"abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr "Những thay đối sau đây đã được để trở về tình trạng cũ. "
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"Hệ thống bây giờ đang flashing.<br /> DO NOT POWER OFF THE DEVICE!<br /> Chờ "
-"một vài phút cho tới khi kết nối lại. Có thể cần phải làm mới địa chỉ của "
-"máy tính để tiếp cận thiết bị một lần nữa, phụ thuộc vào cài đặt của bạn. "
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-"Tập tin đang tải hình ảnh không bao gồm một hổ trợ format. Bảo đảm rằng bạn "
-"chọn một image format tổng quát cho platform."
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"Đây là <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> duy "
-"nhất trong mạng địa phương. "
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "Đây là system crontab mà scheduled tasks có thể bị định nghĩa."
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-"List này đưa ra một tầm nhìn tổng quát về xử lý hệ thống đang chạy và tình "
-"trạng của chúng."
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-"Trang này cung cấp một tổng quan về đang hoạt động kết nối mạng hiện tại."
-
-msgid "This section contains no values yet"
-msgstr "Phần này chưa có giá trị nào"
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr "Múi giờ "
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr ""
-
-msgid "Transfer"
-msgstr "Chuyển giao"
-
-msgid "Transmission Rate"
-msgstr "Truyền tải rate"
-
-msgid "Transmit"
-msgstr "Transmit"
-
-msgid "Transmit Power"
-msgstr "Truyền tải năng lượng"
-
-msgid "Transmitter Antenna"
-msgstr "Máy phát Antenna"
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr "Turbo Mode"
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr "Loại "
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr "Thay đổi không lưu"
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr "Tập tin đã tải lên"
-
-msgid "Uptime"
-msgstr "Uptime"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "Dùng <code>/etc/ethers</code>"
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr "Đã sử dụng"
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr "Tên người dùng "
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr "Phiên bản"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr "WMM Mode"
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "Cảnh báo: Các thay đổi chưa lưu sẽ bị mất trong khi khởi động lại!"
-
-msgid "Wifi"
-msgstr "Wifi"
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr "Bộ tương hợp không dây"
-
-msgid "Wireless Network"
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr "Hỗ trợ XR"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"Bạn có thể bật hoặc tắt cài đặt init script tại đây. Thay đổi này sẽ được áp "
-"dụng sau khi một thiết bị khởi động lại.<br /><strong>Cảnh báo: Nếu bạn vô "
-"hiệu hoá init script thiết yếu như &amp;quot;network&amp;quot;, công cụ của "
-"bạn chó thể trở nên không truy cập được</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr "tự động"
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "tạo một cầu nối trên một giao diện được chỉ định"
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr "Vô hiệu hóa"
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"Tập tin được cho <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases sẽ được lưu trữ"
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr ""
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr "Nếu mục tiêu là một network"
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "Tập tin <abbr title=\"Domain Name System\">DNS</abbr> địa phương"
-
-msgid "no"
-msgstr ""
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr "không "
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr ""
-
-msgid "unspecified"
-msgstr ""
-
-msgid "unspecified -or- create:"
-msgstr ""
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr ""
-
-msgid "« Back"
-msgstr ""
-
-#~ msgid "Active Leases"
-#~ msgstr "Leases hoạt động"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Mã hóa\">Encr.</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "<abbr title=\"Mạng lưới không dây địa phương\">WLAN</abbr>-Scan"
-
-#~ msgid "Create Network"
-#~ msgstr "Tạo network"
-
-#~ msgid "Link"
-#~ msgstr "Link"
-
-#~ msgid "Networks"
-#~ msgstr "mạng lưới"
-
-#~ msgid "Power"
-#~ msgstr "Power"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "Mạng lưới wifi ở môi trường xung quanh bạn"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Hệ thông tên miền\">DNS</abbr>-Máy chủ"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "Cổng network trên bộ định tuyến có thể phối hợp với nhiều <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s làm máy tính tự giao tiếp "
-#~ "trực tiếp với nhau. <abbr title=\"Virtual Local Area Network\">VLAN</"
-#~ "abbr>s thường được dùng để phân tách những phân đoạn network khác nhau. "
-#~ "Thông thường có một cổng Uplink mặc định cho một kết nối vào mạng lớn hơn "
-#~ "như Internet và các cổng khác cho một mạng lưới địa phương."
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "Tập tin được lưu giữ khi truyền tới một phần cứng mới"
-
-#~ msgid "General"
-#~ msgstr "Tổng quát"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Ở đây bạn có thể tùy chỉnh các cài đặt và các chức năng của <abbr title="
-#~ "\"Cấu hình giao diện Lua\">LuCI</abbr>."
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Đăng _ cam kết hành động"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "Những lệnh này sẽ được thực hiện tự động khi một <abbr title=\"Cấu hình "
-#~ "giao diện thống nhất \">UCI</abbr> được cam kết cho phép các thay đổi "
-#~ "được áp dụng ngay lập tức. "
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "Điểm truy cập (APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "Tùy chọn pppd bổ sung"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "Tự động ngừng kết nối"
-
-#~ msgid "Backup Archive"
-#~ msgstr "Backup Archive"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr ""
-#~ "Định cấu hình DNS server địa phương để dùng tên servers adverticed bởi "
-#~ "PPP peer"
-
-#~ msgid "Connect script"
-#~ msgstr "Kết nối script"
-
-#~ msgid "Create backup"
-#~ msgstr "Tạo backup"
-
-#~ msgid "Disconnect script"
-#~ msgstr "Ngừng script"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "Chỉnh sửa danh sách gói và mục tiêu cài đặt"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "Kích hoạt IPv6 on PPP link"
-
-#~ msgid "Firmware image"
-#~ msgstr "HÌnh ảnh firmware"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr ""
-#~ "Ở đây bạn có thể backup và khôi phục lại cấu hình bộ định tuyến và- nếu "
-#~ "có thể - reset bộ định tuyến ở cài đặt mặc định."
-
-#~ msgid "Installation targets"
-#~ msgstr "Mục tiêu cài đặt"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "Giữ tập tin cấu hình"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "Giữ-alive"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr ""
-#~ "Để pppd thay thế route mặc định hiện tại để dùng giao diện PPP sau khi "
-#~ "kết nối thành công"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "Để pppd chạy script này sau khi thành lập PPP link"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "Để pppd chạy trên script trước khi phá vỡ PPP link"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr ""
-#~ "Bảo đảm rằng bạn cung cấp pin code chính xác ở đây hoặc sim card của bạn "
-#~ "sẽ bị khóa"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "Đa số các mạng server mà cung cấp một service nhất định cho công cụ của "
-#~ "bạn hoặc mạng như shell access, phục vụ các trang web như <abbr title="
-#~ "\"Giao diện cấu hình Lua\">LuCI</abbr>, làm lưới định tuyến, gửi e-"
-#~ "mail, ..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "Kiểm tra số lượng kết nối không thành công để tự động kết nối lại. "
-
-#~ msgid "PIN code"
-#~ msgstr "PIN code"
-
-#~ msgid "PPP Settings"
-#~ msgstr "Cài đặt "
-
-#~ msgid "Package lists"
-#~ msgstr "Danh sách đóng gói"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "Tiến trình này sẽ chuyển mọi thiết lập về firmware mặc định"
-
-#~ msgid "Processor"
-#~ msgstr "Bộ xử lý"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-Port"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-Server"
-
-#~ msgid "Replace default route"
-#~ msgstr "Thay thế route mặc định"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "Đặt lại bộ định tuyến ở chế độ mặc định"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "Giây để chờ cho modem trở nên sẵn sàng trước khi kết nối"
-
-#~ msgid "Service type"
-#~ msgstr "Service type"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr ""
-#~ "Services và daemons tiến hành nhưng công đoạn nhất định trên công cụ của "
-#~ "bạn"
-
-#~ msgid "Settings"
-#~ msgstr "Cài đặt "
-
-#~ msgid "Setup wait time"
-#~ msgstr "Cài đặt thời gian chờ"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr ""
-#~ "Xin lỗi. OpenWrt không hỗ trợ nâng cấp hệ thống trên platform này. <br /> "
-#~ "Bạn cần tự flash thiết bị của bạn. "
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "Chỉ định những dòng lệnh tranh cãi cho pppd ở đây"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "Thiết bị node của modem, e.g. /dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "Thời gian (giây) sau khi một kết nối không sử dụng sẽ bị đóng"
-
-#~ msgid "Update package lists"
-#~ msgstr "Cập nhật danh sách gói"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "Tải một tập tin hình ảnh OpenWrt để reflash thiết bị."
-
-#~ msgid "Upload image"
-#~ msgstr "Tải hình ảnh"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "Dùng peer DNS"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "Bạn cần cài đặt &amp;quot;comgt&amp;quot; for UMTS/GPRS, &amp;quot;ppp-"
-#~ "mod-pppoe&amp;quot; for PPPoE, &amp;quot;ppp-mod-pppoa&amp;quot; for "
-#~ "PPPoA or &amp;quot;pptp&amp;quot; for PPtP support"
-
-#~ msgid "back"
-#~ msgstr "quay lại"
-
-#~ msgid "buffered"
-#~ msgstr "buffered"
-
-#~ msgid "cached"
-#~ msgstr "cached"
-
-#~ msgid "free"
-#~ msgstr "free"
-
-#~ msgid "static"
-#~ msgstr "thống kê"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Cấu hình giao diện Lua \">LuCI</abbr> là một tập hợp của "
-#~ "phần mềm Lua bao gồm <abbr title=\"Model-View-Controller\">MVC</abbr>-"
-#~ "Công cụ Web và giao diện Web cho thiết bị nhúng. <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr> được lưu hành dưới giấy phép Apache."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Vỏ bảo mậtl\">SSH</abbr>-Phím"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr ""
-#~ "Một lightưeight HTTP/1.1 webserver viết bằng C và Lúa được thiết kế để "
-#~ "phục vụ LuCI"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Một webserver nhỏ  có thể dùng để phục vụ <abbr title=\"Giao diện cấu "
-#~ "hình Lua\">LuCI</abbr>."
-
-#~ msgid "About"
-#~ msgstr "Về"
-
-#~ msgid "Addresses"
-#~ msgstr "Địa chỉ"
-
-#~ msgid "Admin Password"
-#~ msgstr "Mật khẩu quản lí"
-
-#~ msgid "Alias"
-#~ msgstr "Bí danh"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "Realm xác định"
-
-#~ msgid "Bridge Port"
-#~ msgstr "Cổng cầu nối"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "Thay đổi mật mã của quản lí hệ thống (User <code>root</code>)"
-
-#~ msgid "Client + WDS"
-#~ msgstr "Đối tượng + WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "Tập tin cấu hình"
-
-#~ msgid "Connection timeout"
-#~ msgstr "Kết nối dừng"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "Phát triển viên"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "Gán DHCP"
-
-#~ msgid "Document root"
-#~ msgstr "Gốc tài liệu "
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "Kích hoạt Keep-Alive"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "Cầu nối ethernet"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "ở đây bạn có thể dán công khai <abbr title=\"Secure Shell\"> SSH</abbr>-"
-#~ "Keys (mỗi cái một dòng) for <abbr title=\"Secure Shell\">SSH</abbr> xác "
-#~ "thực khóa công khai"
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "Cấu hình IP"
-
-#~ msgid "Interface Status"
-#~ msgstr "Tình trạng giao diện"
-
-#~ msgid "Lead Development"
-#~ msgstr "Dẫn đầu phát triển"
-
-#~ msgid "Master"
-#~ msgstr "Chủ"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Chủ + WDS"
-
-#~ msgid "Not configured"
-#~ msgstr "Không định cấu hình"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "Mật mã đã thay đổi thành công"
-
-#~ msgid "Plugin path"
-#~ msgstr "Đường dẫn Plugin"
-
-#~ msgid "Ports"
-#~ msgstr "Cửa"
-
-#~ msgid "Primary"
-#~ msgstr "Chính"
-
-#~ msgid "Project Homepage"
-#~ msgstr "Trang chủ dự án"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "Pseudo Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "Cám ơn"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr ""
-#~ "Realm đó sẽ được hiển thị tại dấu nhắc xác thực cho các trang web được "
-#~ "bảo vệ."
-
-#~ msgid "Unknown Error"
-#~ msgstr "Không hiểu lỗi"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "Mặc định tới <code>/etc/httpd.conf</code>"
-
-#~ msgid "Package lists updated"
-#~ msgstr "Danh sách gói đã được cập nhật"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "nâng cấp gói cài đặt"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr ""
-#~ "Kernel hoặc service logfiles cũng có thể được view ở đây để lấy tầm nhìn "
-#~ "tổng quát của hình trạng hiện tại. "
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "Ở đây bạn có thể tìm thấy thông tin về tình trạng của hệ thống hiện hành  "
-#~ "như là <abbr title=\"Bộ điều khiển trung tâm\">CPU</abbr> đồng hồ tần số, "
-#~ "bộ nhớ hoặc mạng lưới dữ liệu giao diện."
-
-#~ msgid "Search file..."
-#~ msgstr "Tìm tập tin..."
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Cấu hình giao diện Lua \">LuCI</abbr> thì miễn phí, đa "
-#~ "dạng , và đồ họa thân thiện với sử dụng cho các cấu hình OpenWrt Kamikaze."
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "Và bây giờ hãy bắt đầu chơi với bộ định tuyến của bạn!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr ""
-#~ "Vì chúng tôi luôn muốn cải thiện giao diện này, chúng tôi hy vọng  nhận "
-#~ "được đóng góp và ý kiến của các bạn. "
-
-#~ msgid "Hello!"
-#~ msgstr "Xin chào"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "Ghi chú: Trong <abbr title=\"Cấu hình giao diện Lua \">LuCI</abbr> những "
-#~ "thay đổi phải được xác nhận bằng cách nhấn vào Changes - Save &amp; Áp "
-#~ "dụng trước khi được áp dụng."
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr ""
-#~ "Ở những trang kế tiếp, bạn có thể thay đổi những cài đặt quan trong của "
-#~ "bộ định tuyến."
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "Nhóm <abbr title=\"Cấu hình giao diện Lua\">LuCI</abbr> "
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "Đây là vùng quản trị của <abbr title=\"Cấu hình giao diện Lua\">LuCI</"
-#~ "abbr>."
-
-#~ msgid "User Interface"
-#~ msgstr "Giao diện người sử dụng"
-
-#~ msgid "enable"
-#~ msgstr "Kích hoạt"
-
-#, fuzzy
-#~ msgid "(optional)"
-#~ msgstr ""
-#~ "<span class=\"translation-space\"> </span>\n"
-#~ "(tùy ý)"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-Cổng"
-
-#~ msgid ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server will be queried in "
-#~ "the order of the resolvfile"
-#~ msgstr ""
-#~ "<abbr title=\"Domain Name System\">DNS</abbr>-Server sẽ bị tra vấn theo "
-#~ "thứ tự của tập tin resolv. "
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-#~ msgstr ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Dynamic Host "
-#~ "Configuration Protocol\">DHCP</abbr>-Leases"
-
-#~ msgid ""
-#~ "<abbr title=\"maximal\">max.</abbr> <abbr title=\"Extension Mechanisms "
-#~ "for Domain Name System\">EDNS0</abbr> packet size"
-#~ msgstr ""
-#~ "<abbr title=\"tối đal\">max.</abbr> <abbr title=\"Mở rộng cơ chế cho hệ "
-#~ "thống tên miền\">EDNS0</abbr> dung lượng gói tin"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP-Isolation"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "Thêm mạng Wifi vào màng vật lý"
-
-#~ msgid "Aliases"
-#~ msgstr "Aliases"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "Clamp Segment Size"
-
-#, fuzzy
-#~ msgid "Create Or Attach Network"
-#~ msgstr "Tạo network"
-
-#~ msgid "Devices"
-#~ msgstr "Những công cụ"
-
-#~ msgid "Don't forward reverse lookups for local networks"
-#~ msgstr "Don&amp;#39;t chuyển tiếp lookups đảo ngược cho các mạng địa phương"
-
-#~ msgid "Enable TFTP-Server"
-#~ msgstr "Kích hoạt TFTP-Server"
-
-#~ msgid "Errors"
-#~ msgstr "Lỗi"
-
-#~ msgid "Essentials"
-#~ msgstr "Essentials"
-
-#~ msgid "Expand Hosts"
-#~ msgstr "Mở rộng Hosts"
-
-#~ msgid "First leased address"
-#~ msgstr "Địa chỉ lease đầu tiên"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr ""
-#~ "Chỉnh sửa vấn đề với những website không tiếp cận được, trình form hoặc "
-#~ "những hình thức bất ngờ cho một vài ISP."
-
-#~ msgid "Hardware Address"
-#~ msgstr "Địa chỉ phần cứng"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "Ở đây bạn có thể định cấu hình của công cụ wifi được cài đặt."
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "Lờ đi <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "Độc lập (Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "Kết nối Internet"
-
-#~ msgid "Join (Client)"
-#~ msgstr "Tham gia (client)"
-
-#~ msgid "Leases"
-#~ msgstr "Leases"
-
-#~ msgid "Local Domain"
-#~ msgstr "Domain địa phương"
-
-#~ msgid "Local Network"
-#~ msgstr "Network địa phương"
-
-#~ msgid "Local Server"
-#~ msgstr "Server địa phương"
-
-#~ msgid "Network Boot Image"
-#~ msgstr "Hình ảnh khởi động mạng lưới"
-
-#~ msgid ""
-#~ "Network Name (<abbr title=\"Extended Service Set Identifier\">ESSID</"
-#~ "abbr>)"
-#~ msgstr ""
-#~ "Tên mạng (<abbr title=\"Mở rộng dịch vụ đặt Identifier\">ESSID</abbr>)"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "Số của địa chỉ lease"
-
-#~ msgid "Path"
-#~ msgstr "Đường dẫn"
-
-#~ msgid "Perform Actions"
-#~ msgstr "Trình bày hành động"
-
-#~ msgid "Prevents Client to Client communication"
-#~ msgstr "Ngăn chặn giao tiếp giữa client-và-client"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "Cung cấp (Điểm truy cập)"
-
-#~ msgid "Resolvfile"
-#~ msgstr "Tập tin Resolv"
-
-#~ msgid "TFTP-Server Root"
-#~ msgstr "Gốc TFTP-Server "
-
-#~ msgid "TX / RX"
-#~ msgstr "TX / RX"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "Những thay đổi sau đây đã được tiến hành"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "Khi truyền đến phần cứng với  <abbr title=\"Cấu hình giao diện Lua "
-#~ "\">LuCI</abbr> Những tập tin này sẽ được bổ sung vào cài đặt phần cứng "
-#~ "mới."
-
-#, fuzzy
-#~ msgid "Wireless Scan"
-#~ msgstr "Mạng không dây"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "Với <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> thành "
-#~ "viên network có thể tự động nhận cài đặt mạng (<abbr title=\"Internet "
-#~ "Protocol\">IP</abbr>-address, netmask, <abbr title=\"Domain Name System"
-#~ "\">DNS</abbr>-server, ...)."
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "Bạn có thể chạy nhiều mạng wifi với một công cụ. Hãy chú ý rằng một số "
-#~ "phần cứng và driverspecific bị hạn chế. Thông thường, bạn có thể vận hành "
-#~ "1 Ad-Hoc hay tối đa là 3-chế độ master và 1-chế độ client mạng lưới cùng "
-#~ "một lúc."
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr ""
-#~ "Bạn cần cài đặt &amp;quot;ppp-mod-pppoe&amp;quot; for PPPoE or &amp;quot;"
-#~ "pptp&amp;quot; cho hỗ trợ PPtP "
-
-#~ msgid "Zone"
-#~ msgstr "Zone"
-
-#~ msgid "additional hostfile"
-#~ msgstr "Tập tin host bổ sung"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "Thêm tên miền vào hostentries trong tập tin resolv "
-
-#, fuzzy
-#~ msgid "automatic"
-#~ msgstr "thống kê"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "Tự động kết nối lại"
-
-#~ msgid "concurrent queries"
-#~ msgstr "Đồng truy vấn"
-
-#~ msgid ""
-#~ "disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "for this interface"
-#~ msgstr ""
-#~ "Vô hiệu hóa <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr> cho giao diện này"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "Ngừng kết nối khi idle cho"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "don&amp;#39;t cache unknown"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "lọc không hữu dụng <abbr title=\"Hệ thống tên miền\">DNS</abbr>-các tra "
-#~ "vấn của hệ thống Windows"
-
-#~ msgid "installed"
-#~ msgstr "Đã cài đặt "
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "Địa phương hóa các hostname phụ thuộc vào subnet"
-
-#~ msgid "not installed"
-#~ msgstr "không cài đặt "
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr ""
-#~ "Ngăn ngừa tiêu cực trong bộ nhớ đệm <abbr title=\"Hệ thống tên miền"
-#~ "\">DNS</abbr>-trả lời"
-
-#~ msgid "query port"
-#~ msgstr "cổng truy vấn"
-
-#~ msgid "transmitted / received"
-#~ msgstr "Đã truyền/ đã nhận"
-
-#, fuzzy
-#~ msgid "Join network"
-#~ msgstr "contained networks"
-
-#~ msgid "all"
-#~ msgstr "tất cả"
-
-#~ msgid "Code"
-#~ msgstr "Mã"
-
-#~ msgid "Distance"
-#~ msgstr "Khoảng cách "
-
-#~ msgid "Legend"
-#~ msgstr "Legend"
-
-#~ msgid "Library"
-#~ msgstr "thư viện "
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "xem &amp;#39;%s&amp;#39; trang chính"
-
-#~ msgid "Package Manager"
-#~ msgstr "Quản lí gói"
-
-#~ msgid "Service"
-#~ msgstr "Dịch vụ "
-
-#~ msgid "Statistics"
-#~ msgstr "Thống kê"
-
-#~ msgid "zone"
-#~ msgstr "Zone"
diff --git a/po/vi/commands.po b/po/vi/commands.po
deleted file mode 100644
index 4132274..0000000
--- a/po/vi/commands.po
+++ /dev/null
@@ -1,91 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/vi/coovachilli.po b/po/vi/coovachilli.po
deleted file mode 100644
index 66abf0d..0000000
--- a/po/vi/coovachilli.po
+++ /dev/null
@@ -1,607 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:59+0200\n"
-"PO-Revision-Date: 2009-08-16 07:05+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli"
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
-
-#~ msgid "General configuration"
-#~ msgstr "Cấu hình tổng quát"
-
-#~ msgid "General CoovaChilli settings"
-#~ msgstr "Các cài đặt CoovaChilli tổng quát"
-
-#~ msgid "Command socket"
-#~ msgstr "Command socket"
-
-#~ msgid "UNIX socket used for communication with chilli_query"
-#~ msgstr "UNIX socket dùng để giao tiếp với chilli_query"
-
-#~ msgid "Config refresh interval"
-#~ msgstr "Config refresh interval"
-
-#~ msgid ""
-#~ "Re-read configuration file and do DNS lookups every interval seconds. "
-#~ "This has the same effect as sending the HUP signal. If interval is 0 "
-#~ "(zero) this feature is disabled. "
-#~ msgstr ""
-#~ "Đọc lại tập tin cấu hình và tra cưứ DNS mỗi giây. Cái này có ảnh hưởng "
-#~ "giống như đang gửi một tín hiệu HUP. Nếu  interval là 0, tính năng này sẽ "
-#~ "bị vô hiệu hóa. <span class=\"translation-space\"> </span> "
-
-#~ msgid "Pid file"
-#~ msgstr "Tập tin Pid"
-
-#~ msgid "Filename to put the process id"
-#~ msgstr "Tên tập tin để đặt làm ID xử lý"
-
-#~ msgid "State directory"
-#~ msgstr "Dạnh bạ vùng"
-
-#~ msgid "Directory of non-volatile data"
-#~ msgstr "Thư mục của những dữ liệu cố định"
-
-#~ msgid "TUN/TAP configuration"
-#~ msgstr "Cấu hình TUN/TAP"
-
-#~ msgid "Network/Tun configuration"
-#~ msgstr "Mạng lưới/ Cấu hình TUN"
-
-#~ msgid "Network down script"
-#~ msgstr "Network down script"
-
-#~ msgid ""
-#~ "Script executed after a session has moved from authorized state to "
-#~ "unauthorized"
-#~ msgstr ""
-#~ "Script đã thực hiện sau khi một section đã di chuyển từ nơi có thẩm quyền "
-#~ "đến nơi không"
-
-#~ msgid "Network up script"
-#~ msgstr "Network up script"
-
-#~ msgid "Script executed after the tun network interface has been brought up"
-#~ msgstr "Script thi hành sau khi giao diện mạng tun được đưa lên"
-
-#~ msgid "Primary DNS Server"
-#~ msgstr "Primary DNS Server"
-
-#~ msgid "Secondary DNS Server"
-#~ msgstr "Secondary DNS Server"
-
-#~ msgid "Domain name"
-#~ msgstr "Tên miền"
-
-#~ msgid ""
-#~ "Is used to inform the client about the domain name to use for DNS lookups"
-#~ msgstr ""
-#~ "Được sử dụng để thông báo cho khách hàng về tên miền để dùng cho các tra "
-#~ "cứu DNS"
-
-#~ msgid "Dynamic IP address pool"
-#~ msgstr "Dynamic IP address pool"
-
-#~ msgid "Specifies a pool of dynamic IP addresses"
-#~ msgstr "Chỉ định một pool of dynamic IP addresses"
-
-#~ msgid "IP down script"
-#~ msgstr "IP down script"
-
-#~ msgid "Script executed after the tun network interface has been taken down"
-#~ msgstr "Script thực hiện sau khi giao diện mạng tun bị lấy xuống"
-
-#~ msgid "IP up script"
-#~ msgstr "IP up script"
-
-#~ msgid ""
-#~ "Script executed after the TUN/TAP network interface has been brought up"
-#~ msgstr "Script thực hiện sau khi giao diện mạng TUN/TAP đã được đưa lên"
-
-#~ msgid "Uplink subnet"
-#~ msgstr "Uplink subnet"
-
-#~ msgid "Network address of the uplink interface (CIDR notation)"
-#~ msgstr "Địa chỉ mạng của giao diện uplink (CIDR chú thích)"
-
-#~ msgid "Static IP address pool"
-#~ msgstr "Static IP address pool"
-
-#~ msgid "Specifies a pool of static IP addresses"
-#~ msgstr "Chỉ định một pool of static IP addresses"
-
-#~ msgid "TUN/TAP device"
-#~ msgstr "TUN/TAP device"
-
-#~ msgid "The specific device to use for the TUN/TAP interface"
-#~ msgstr "Thiết bị cụ thể để dùng cho giao diện TUN/TAP"
-
-#~ msgid "TX queue length"
-#~ msgstr "Độ dài của TX queue"
-
-#~ msgid "The TX queue length to set on the TUN/TAP interface"
-#~ msgstr "Độ dài TX queue để đặt trên giao diện TUN/TAP "
-
-#~ msgid "Use TAP device"
-#~ msgstr "Dùng dụng cụ TAP"
-
-#~ msgid "Use the TAP interface instead of TUN"
-#~ msgstr "Dùng giao diện TAP thay cho TUN"
-
-#~ msgid "DHCP configuration"
-#~ msgstr "Cấu hình DHCP"
-
-#~ msgid "Set DHCP options for connecting clients"
-#~ msgstr "Đặt lựa chọn DHCP cho đối tượng kết nối"
-
-#~ msgid "DHCP end number"
-#~ msgstr "Số cuối DHCP"
-
-#~ msgid "Where to stop assigning IP addresses (default 254)"
-#~ msgstr "Chỗ để stop những gán IP (mặc định 254)"
-
-#~ msgid "DHCP interface"
-#~ msgstr "Giao diện DHCP"
-
-#~ msgid "Ethernet interface to listen to for the downlink interface"
-#~ msgstr "Giao diện Ethernet để listen cho những giao diện downlink "
-
-#~ msgid "Listen MAC address"
-#~ msgstr "Nghe địa chỉ MAC"
-
-#~ msgid ""
-#~ "MAC address to listen to. If not specified the MAC address of the "
-#~ "interface will be used"
-#~ msgstr ""
-#~ "Địa chỉ MAC để  nghe. Nếu địa chỉ MAC chỉ định của giao diện sẽ được sử "
-#~ "dụng "
-
-#~ msgid "DHCP start number"
-#~ msgstr "Số DHCP bắt đầu "
-
-#~ msgid "Where to start assigning IP addresses (default 10)"
-#~ msgstr "Chỗ để bắt đầu gán địa chỉ IP (mặc định 10)"
-
-#~ msgid "Enable IEEE 802.1x"
-#~ msgstr "Kích hoạt IEEE 802.1x"
-
-#~ msgid "Enable IEEE 802.1x authentication and listen for EAP requests"
-#~ msgstr "Kích hoạt quá trình xác thực IEEE 802.1x và lắng nghe yêu cầu EAP"
-
-#~ msgid "Leasetime"
-#~ msgstr "Leasetime"
-
-#~ msgid "Use a DHCP lease of seconds (default 600)"
-#~ msgstr "Dùng một DHCP lease ở giây (600)"
-
-#~ msgid "Allow session update through RADIUS"
-#~ msgstr "Cho phép phiên cập nhật thông qua RADIUS"
-
-#~ msgid ""
-#~ "Allow updating of session parameters with RADIUS attributes sent in "
-#~ "Accounting-Response"
-#~ msgstr ""
-#~ "Cho phép phiên cập nhật tham số phiên với RADIUS được gửi trong "
-#~ "Accounting-Response"
-
-#~ msgid "Admin password"
-#~ msgstr "Mật mã quản trị "
-
-#~ msgid ""
-#~ "Password to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "Mật mã dùng để xác thực chế độ quản trị để pick up cấu hình chilli và "
-#~ "thành lập một công cụ &amp;quot;system&amp;quot; session"
-
-#~ msgid "Admin user"
-#~ msgstr "Người quản trị "
-
-#~ msgid ""
-#~ "User-name to use for Administrative-User authentication in order to pick "
-#~ "up chilli configurations and establish a device \"system\" session"
-#~ msgstr ""
-#~ "User name dùng để xác thực chế độ quản trị để pick up cấu hình chilli và "
-#~ "thành lập một công cụ &amp;quot;system&amp;quot; session"
-
-#~ msgid "Do not check disconnection requests"
-#~ msgstr "Không kiểm tra yêu cầu ngừng kết nối"
-
-#~ msgid "Do not check the source IP address of radius disconnect requests"
-#~ msgstr ""
-#~ "Không tên kiểm tra nguồn địa chỉ IP trong bán kính yêu cầu ngừng kết nối"
-
-#~ msgid "RADIUS disconnect port"
-#~ msgstr "Cửa ngừng kết nối RADIUS"
-
-#~ msgid "UDP port to listen to for accepting radius disconnect requests"
-#~ msgstr "Cửa UDP để nghe khi chấp nhận một yêu cầu ngừng kết nối"
-
-#~ msgid "NAS IP"
-#~ msgstr "NAS IP "
-
-#~ msgid "Value to use in RADIUS NAS-IP-Address attribute"
-#~ msgstr "Giá trị để dùng trong RADIUS NAS-IP-Address attribute"
-
-#~ msgid "NAS MAC"
-#~ msgstr "NAS MAC"
-
-#~ msgid "MAC address value to use in RADIUS Called-Station-ID attribute"
-#~ msgstr ""
-#~ "Giá trị địa chỉ MAC để dùng trong RADIUS Called-Station-ID attribute"
-
-#~ msgid "Allow OpenID authentication"
-#~ msgstr "Cho phép xác thực OpenID "
-
-#~ msgid ""
-#~ "Allows OpenID authentication by sending ChilliSpot-Config=allow-"
-#~ "openidauth in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Cho phép xác thực OpenID bằng cách gửi ChilliSpot-Config=allow-openidauth "
-#~ "in RADIUS Access-Requests"
-
-#~ msgid "RADIUS accounting port"
-#~ msgstr "Cổng RADIUS accounting"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius accounting requests (default 1813)"
-#~ msgstr "Số của cổng UDP dùng cho yêu cầu radius accounting (mặcđịnh 1813)"
-
-#~ msgid "RADIUS authentication port"
-#~ msgstr "Cổng xác thực RADIUS"
-
-#~ msgid ""
-#~ "The UDP port number to use for radius authentication requests (default "
-#~ "1812)"
-#~ msgstr "Số của cổng UDP để yêu cầu xác thực radius (default 1812)"
-
-#~ msgid "Option radiuscalled"
-#~ msgstr "Tùy chọn radiuscalled"
-
-#~ msgid "RADIUS listen address"
-#~ msgstr "Địa chỉ nghe RADIUS"
-
-#~ msgid "Local interface IP address to use for the radius interface"
-#~ msgstr "Địa chỉ IP giao diện địa phương để dùng cho giao diện radius"
-
-#~ msgid "RADIUS location ID"
-#~ msgstr "RADIUS vị tri ID"
-
-#~ msgid "WISPr Location ID"
-#~ msgstr "WISPr vị trí ID"
-
-#~ msgid "RADIUS location name"
-#~ msgstr "Tên vị trí RADIUS"
-
-#~ msgid "WISPr Location Name"
-#~ msgstr "Tên vị trí WISPr"
-
-#~ msgid "NAS ID"
-#~ msgstr "NAS ID"
-
-#~ msgid "Network access server identifier"
-#~ msgstr "Network truy cập server identifier"
-
-#~ msgid "Option radiusnasip"
-#~ msgstr "Lựa chọn radiusnasip"
-
-#~ msgid "NAS port type"
-#~ msgstr "Loại cổng NAS"
-
-#~ msgid ""
-#~ "Value of NAS-Port-Type attribute. Defaults to 19 (Wireless-IEEE-802.11)"
-#~ msgstr ""
-#~ "Giá trị của NAS-Port-Type attribute. Mặc định tới 19 (Wireless-"
-#~ "IEEE-802.11)"
-
-#~ msgid "Send RADIUS VSA"
-#~ msgstr "Gửi RADIUS VSA"
-
-#~ msgid "Send the ChilliSpot-OriginalURL RADIUS VSA in Access-Request"
-#~ msgstr "Gửi ChilliSpot-OriginalURL RADIUS VSA trong yêu cầu truy cập"
-
-#~ msgid "RADIUS secret"
-#~ msgstr "RADIUS bí mật"
-
-#~ msgid "Radius shared secret for both servers"
-#~ msgstr "Radius chia sẻ bí mật cho cả 2 servers"
-
-#~ msgid "RADIUS server 1"
-#~ msgstr "RADIUS server 1"
-
-#~ msgid "The IP address of radius server 1"
-#~ msgstr "Địa chỉ IP của radius server 1"
-
-#~ msgid "RADIUS server 2"
-#~ msgstr "RADIUS server 2"
-
-#~ msgid "The IP address of radius server 2"
-#~ msgstr "Địa chỉ IP của radius server 2"
-
-#~ msgid "Swap octets"
-#~ msgstr "Swap octets"
-
-#~ msgid ""
-#~ "Swap the meaning of \"input octets\" and \"output octets\" as it related "
-#~ "to RADIUS attribtues"
-#~ msgstr ""
-#~ "Hoán ý nghĩa của &amp;quot;input octets&amp;quot; và &amp;quot;output "
-#~ "octets&amp;quot; khi nó liên quan tới RADIUS attribtues"
-
-#~ msgid "Allow WPA guests"
-#~ msgstr "Cho phép WPA guests"
-
-#~ msgid ""
-#~ "Allows WPA Guest authentication by sending ChilliSpot-Config=allow-wpa-"
-#~ "guests in RADIUS Access-Requests"
-#~ msgstr ""
-#~ "Cho phép xác thực WPA Guest bằng cách gửi ChilliSpot-Config=allow-wpa-"
-#~ "guests trong RADIUS yêu cầu truy cập"
-
-#~ msgid "Proxy client"
-#~ msgstr "Proxy client"
-
-#~ msgid ""
-#~ "IP address from which radius requests are accepted. If omitted the server "
-#~ "will not accept radius requests"
-#~ msgstr ""
-#~ "Địa chỉ IP mà yêu cầu radius được chấp nhận. Nếu bỏ qua server sẽ không "
-#~ "chấp nhận yêu cầu radius."
-
-#~ msgid "Proxy listen address"
-#~ msgstr "Proxy listen address"
-
-#~ msgid "Local interface IP address to use for accepting radius requests"
-#~ msgstr "Địa chỉ giao diện IP  địa phương dùng để chấp nhận yêu cầu radius"
-
-#~ msgid "Proxy port"
-#~ msgstr "Proxy port"
-
-#~ msgid "UDP Port to listen to for accepting radius requests"
-#~ msgstr "Cổng UDP để listen để chấp nhận yêu cầu radius"
-
-#~ msgid "Proxy secret"
-#~ msgstr "Proxy bí mật"
-
-#~ msgid "Radius shared secret for clients"
-#~ msgstr "Radius chia sẻ bí mật cho các client"
-
-#~ msgid "UAM configuration"
-#~ msgstr "Cấu hình UAM"
-
-#~ msgid "Unified Configuration Method settings"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#~ msgid "Use Chilli XML"
-#~ msgstr "Dùng Chilli XML"
-
-#~ msgid "Return the so-called Chilli XML along with WISPr XML"
-#~ msgstr "Trở về cái gọi là Chilli XML cùng với WISPr XML"
-
-#~ msgid "Default idle timeout"
-#~ msgstr "Mặc định idle timeout"
-
-#~ msgid "Default idle timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr "Mặc định idle timeout trừ khi đặt bởi RADIUS (mặc định tới 0)"
-
-#~ msgid "Default interim interval"
-#~ msgstr "Mặc định interim interval"
-
-#~ msgid ""
-#~ "Default interim-interval for RADIUS accounting unless otherwise set by "
-#~ "RADIUS (defaults to 0)"
-#~ msgstr ""
-#~ "Mặc định interim-interval cho RADIUS accounting trừ khi đặt bởi RADIUS "
-#~ "(defaults tới 0)"
-
-#~ msgid "Default session timeout"
-#~ msgstr "Mặc định session timeout"
-
-#~ msgid ""
-#~ "Default session timeout unless otherwise set by RADIUS (defaults to 0)"
-#~ msgstr "Mặc định session timeout trừ khi đặt bởi RADIUS (mặc định tới 0)"
-
-#~ msgid "Inspect DNS traffic"
-#~ msgstr "Kiểm tra lưu thông DNS"
-
-#, fuzzy
-#~ msgid "Do not redirect to UAM server"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid ""
-#~ "Do not return to UAM server on login success, just redirect to original "
-#~ "URL"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Do not do WISPr"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Do not do any WISPr XML, assume the back-end is doing this instead"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "List of resources the client can access without first authenticating"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Allow any DNS server"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Allow any DNS server for unauthenticated clients"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Allow any IP address"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid ""
-#~ "Allow clients to use any IP settings they wish by spoofing ARP "
-#~ "(experimental)"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Allowed domains"
-#~ msgstr "Tên miền"
-
-#, fuzzy
-#~ msgid ""
-#~ "Defines a list of domain names to automatically add to the walled garden"
-#~ msgstr ""
-#~ "Được sử dụng để thông báo cho khách hàng về tên miền để dùng cho các tra "
-#~ "cứu DNS"
-
-#, fuzzy
-#~ msgid "UAM homepage"
-#~ msgstr "Tên miền"
-
-#, fuzzy
-#~ msgid "URL of homepage to redirect unauthenticated users to"
-#~ msgstr ""
-#~ "Được sử dụng để thông báo cho khách hàng về tên miền để dùng cho các tra "
-#~ "cứu DNS"
-
-#, fuzzy
-#~ msgid "UAM static content port"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "TCP port to bind to for only serving embedded content"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "UAM listening address"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "IP address to listen to for authentication of clients"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "UAM logout IP"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid ""
-#~ "Use this IP address to instantly logout a client accessing it (defaults "
-#~ "to 1.1.1.1)"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "UAM listening port"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "TCP port to bind to for authenticating clients (default 3990)"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "UAM secret"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Shared secret between uamserver and chilli"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "UAM server"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "URL of web server to use for authenticating clients"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "UAM user interface"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid ""
-#~ "An init.d style program to handle local content on the uamuiport web "
-#~ "server"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "CGI program"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid ""
-#~ "Executable to run as a CGI type program (like haserl) for URLs with "
-#~ "extention .chi"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Web content directory"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "Directory where embedded local web content is placed"
-#~ msgstr "Thống nhất cấu hình phương pháp cài đặt"
-
-#, fuzzy
-#~ msgid "MAC configuration"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Configure MAC authentication"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Allowed MAC addresses"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "List of MAC addresses for which MAC authentication will be performed"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Authenticate allowed MAC addresses without the use of RADIUS"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Enable MAC authentification"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Try to authenticate all users based on their mac address alone"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Password"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Password used when performing MAC authentication"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "Suffix"
-#~ msgstr "Cấu hình RADIUS"
-
-#, fuzzy
-#~ msgid "coovachilli_macauth_macsuffix_desc"
-#~ msgstr "Cấu hình RADIUS"
diff --git a/po/vi/ddns.po b/po/vi/ddns.po
deleted file mode 100644
index 6a3ecd5..0000000
--- a/po/vi/ddns.po
+++ /dev/null
@@ -1,95 +0,0 @@
-#  ddns.pot
-#  generated from ./applications/luci-ddns/luasrc/i18n/ddns.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2009-08-12 18:06+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Check for changed IP every"
-msgstr "Kiểm tra mỗi thay đổi IP"
-
-#, fuzzy
-msgid "Check-time unit"
-msgstr "Đơn vị kiểm tra thời gian"
-
-#, fuzzy
-msgid "Custom update-URL"
-msgstr "Tùy chỉnh cập nhật - URL"
-
-msgid "Dynamic DNS"
-msgstr "Dynamic DNS"
-
-#, fuzzy
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-"Dynamic DNS cho phép bộ định tuyến có thể được đạt đến với một hostname cố "
-"định, trong khi có một địa chỉ AP thay đổi năng động."
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "Buộc cập nhật mỗi"
-
-#, fuzzy
-msgid "Force-time unit"
-msgstr "Force-đơn vị thời gian"
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-#, fuzzy
-msgid "Source of IP address"
-msgstr "Nguồn của địa chỉ IP"
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/vi/diag_core.po b/po/vi/diag_core.po
deleted file mode 100644
index d0b6211..0000000
--- a/po/vi/diag_core.po
+++ /dev/null
@@ -1,30 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/vi/diag_devinfo.po b/po/vi/diag_devinfo.po
deleted file mode 100644
index 3251675..0000000
--- a/po/vi/diag_devinfo.po
+++ /dev/null
@@ -1,206 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr "Devices discovered for"
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/vi/ffwizard.po b/po/vi/ffwizard.po
deleted file mode 100644
index 408745d..0000000
--- a/po/vi/ffwizard.po
+++ /dev/null
@@ -1,159 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/vi/firewall.po b/po/vi/firewall.po
deleted file mode 100644
index 40cd24b..0000000
--- a/po/vi/firewall.po
+++ /dev/null
@@ -1,562 +0,0 @@
-#  luci-fw.pot
-#  generated from ./applications/luci-fw/luasrc/i18n/luci-fw.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2009-08-16 14:02+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr "Action"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr "Địa chỉ điểm đến"
-
-msgid "Destination port"
-msgstr "Cổng điểm đến"
-
-#, fuzzy
-msgid "Destination zone"
-msgstr "Điểm đến"
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr "Bỏ qua nhưng gói không hợp lý"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-#, fuzzy
-msgid "Enable SYN-flood protection"
-msgstr "SYN-flood bảo vệ "
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr "External port"
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr "Input"
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-#, fuzzy
-msgid "Internal IP address"
-msgstr "Internal address"
-
-#, fuzzy
-msgid "Internal port"
-msgstr "External port"
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-#, fuzzy
-msgid "MSS clamping"
-msgstr "MSS Clamping"
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr "Output"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-#, fuzzy
-msgid "Source IP address"
-msgstr "Đỉa chỉ MAC nguồn"
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-#, fuzzy
-msgid "Source address"
-msgstr "Đỉa chỉ MAC nguồn"
-
-msgid "Source port"
-msgstr "Cổng nguồn"
-
-#, fuzzy
-msgid "Source zone"
-msgstr "Cổng nguồn"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-"The firewall tạo zones trên giao diện mạng lưới để điều triển sự dòng lưu "
-"thông của mạng."
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr "Zones"
-
-msgid "accept"
-msgstr "chấp nhận"
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr "drop"
-
-msgid "reject"
-msgstr "Không chấp nhận"
-
-#~ msgid "Destination"
-#~ msgstr "Điểm đến"
-
-#~ msgid "Source"
-#~ msgstr "Nguồn"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "Internal port (tùy chọn)"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "Luật cấp cao"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "Luật cấp cao để bạn tùy chỉnh firewall mà bạn cần. Chỉ những kết nối mới "
-#~ "sẽ được làm cho phù hợp. Các gói thuộc đã mở các kết nối sẽ tự động cho "
-#~ "phép vượt qua firewall."
-
-#~ msgid "Port forwarding"
-#~ msgstr "Cổng chuyển tiếp"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr ""
-#~ "Cổng chuyển tiếp cho phép cung cấp những dịch vụ mạng trong vùng tới một "
-#~ "ngoại mạng. "
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "Sự chuyển hướng lưu thông"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr ""
-#~ "Sự chuyển hướng lưu thông cho phép bạn thay đổi địa chỉ điểm đến của gói "
-#~ "chuyển tiếp. "
-
-#, fuzzy
-#~ msgid "Network"
-#~ msgstr "Networks"
-
-#~ msgid "Traffic Control"
-#~ msgstr "Điều khiển lưu thông"
-
-#~ msgid "Zone-to-Zone traffic"
-#~ msgstr "Lưu thông Zone- to - Zone"
-
-#, fuzzy
-#~ msgid ""
-#~ "Here you can specify which network traffic is allowed to flow between "
-#~ "network zones. Only new connections will be matched.  Packets belonging "
-#~ "to already open connections are automatically allowed to pass the "
-#~ "firewall. If you experience occasional connection problems try enabling "
-#~ "MSS Clamping otherwise disable it for performance reasons."
-#~ msgstr ""
-#~ "Tại đây bạn có thể xác định được mạng lưới giao thông được phép lưu lượng "
-#~ "qua network zone. Chỉ có kết nối mới sẽ là phù hợp. Các gói thuộc kết nối "
-#~ "đã mở được tự động được cho phép để vượt qua firewall. Nếu bạn gặp vấn đề "
-#~ "kết nối thử kích hoạt MSS Clamping hoặc vô hiệu hóa nó vì lý do thực thi."
-
-#~ msgid "Zone"
-#~ msgstr "Zone"
-
-#, fuzzy
-#~ msgid "Destination IP"
-#~ msgstr "Điểm đến"
-
-#, fuzzy
-#~ msgid "IP address"
-#~ msgstr "Địa chỉ IP"
-
-#, fuzzy
-#~ msgid "Source MAC-address"
-#~ msgstr "Đỉa chỉ MAC nguồn"
-
-#~ msgid "Custom forwarding"
-#~ msgstr "Tùy chỉnh chuyển tiếp"
-
-#~ msgid "Input Zone"
-#~ msgstr "Input Zone"
-
-#~ msgid "Output Zone"
-#~ msgstr "Output Zone"
-
-#~ msgid "External Zone"
-#~ msgstr "External Zone"
-
-#~ msgid "Source MAC"
-#~ msgstr "Nguồn MAC"
-
-#~ msgid "Defaults"
-#~ msgstr "Mặc định"
-
-#~ msgid ""
-#~ "These are the default settings that are used if no other rules match."
-#~ msgstr ""
-#~ "Có những cài đặt mặc định được dùng nếu những cái luật khác không phù hợp"
-
-#~ msgid ""
-#~ "Zones part the network interfaces into certain isolated areas to separate "
-#~ "network traffic. One or more networks can belong to a zone. The MASQ-flag "
-#~ "enables NAT masquerading for all outgoing traffic on this zone."
-#~ msgstr ""
-#~ "Phân vùng các phần giao diện mạng vào những khu vực cô lập nhất định để "
-#~ "phân chia mạng lưới lưu thông. Một hoặc nhiều mạng lưới có thể thuộc vào "
-#~ "một khu. Các MASQ-flag kích hoạt NAT masquerading cho tất cả các lưu "
-#~ "lượng giao thông trên khu vực này."
-
-#~ msgid "MASQ"
-#~ msgstr "MASQ"
-
-#~ msgid "contained networks"
-#~ msgstr "contained networks"
diff --git a/po/vi/freifunk-policyrouting.po b/po/vi/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/vi/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/vi/freifunk.po b/po/vi/freifunk.po
deleted file mode 100644
index a668287..0000000
--- a/po/vi/freifunk.po
+++ /dev/null
@@ -1,392 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-15 11:56+0200\n"
-"Last-Translator: Stefan Pirwitz <i18n@freifunk-bno.de>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr "Kiểm tra  các phiên bản phần cứng mới và thực hiện tự động cập nhật."
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr "Tọa độ"
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr "E-mail"
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr "Freifunk cập nhật từ xa"
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr "Xin chào và chào mừng gia nhập mạng lưới của"
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Hostname"
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-"Nếu bạn quan tâm đến đề án của chúng tôi, hãy liên hệ cộng đồng địa phương"
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-"Truy cập Internet phù thuộc vào kỹ thật và điều kiện tổ chức và có thể hoạt "
-"động hoặc không hoạt động cho bạn"
-
-msgid "It is operated by"
-msgstr "Nó hoạt động bởi "
-
-msgid "Keep configuration"
-msgstr "Giữ cấu hình"
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr "Địa chỉ"
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr "Bộ nhớ"
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr "Tên"
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr "Chú ý"
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr "Điện thoại"
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr "Tên thật "
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr "Bắt đầu cập nhật "
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr "Phần cứng được cài đặt là phiên bản mới nhất."
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr "Đây là điểm truy cập "
-
-msgid "Update Settings"
-msgstr "Cập nhật cài đặt"
-
-msgid "Update available!"
-msgstr "Cập nhật sẵn có!"
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr "Xác minh hình ảnh đã tải"
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr "Chúng tôi là phát triển mạng lưới nguồn mở không dây đầu tiên"
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr "Bạn có thể tìm thấy thông tin về Freifunk toàn cầu tại "
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/vi/hd_idle.po b/po/vi/hd_idle.po
deleted file mode 100644
index 8d8821a..0000000
--- a/po/vi/hd_idle.po
+++ /dev/null
@@ -1,53 +0,0 @@
-#  hd_idle.pot
-#  generated from ./applications/luci-hd_idle/luasrc/i18n/hd_idle.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2009-08-12 17:50+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Disk"
-msgstr "Ổ đĩa"
-
-#, fuzzy
-msgid "Enable"
-msgstr "Kích hoạt debug"
-
-msgid "Enable debug"
-msgstr "Kích hoạt debug"
-
-#, fuzzy
-msgid "Idle-time"
-msgstr "Thời gian Idle"
-
-#, fuzzy
-msgid "Idle-time unit"
-msgstr "Đơn vị thời gian Idle"
-
-msgid "Settings"
-msgstr "Sắp đặt"
-
-# Hours
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr "hd-idle"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-"hd-idle là một chương trình tiện ích để quay các đĩa ngoài sau một khoảng "
-"thời gian idle."
-
-# Minutes (not minimum)
-msgid "min"
-msgstr ""
diff --git a/po/vi/meshwizard.po b/po/vi/meshwizard.po
deleted file mode 100644
index 180d771..0000000
--- a/po/vi/meshwizard.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/vi/minidlna.po b/po/vi/minidlna.po
deleted file mode 100644
index 070d64c..0000000
--- a/po/vi/minidlna.po
+++ /dev/null
@@ -1,164 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/vi/mmc_over_gpio.po b/po/vi/mmc_over_gpio.po
deleted file mode 100644
index febcbc0..0000000
--- a/po/vi/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-#  mmc_over_gpio.pot
-#  generated from ./applications/luci-mmc_over_gpio/luasrc/i18n/mmc_over_gpio.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:59+0200\n"
-"PO-Revision-Date: 2009-08-13 03:43+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr "Sắp đặt"
diff --git a/po/vi/multiwan.po b/po/vi/multiwan.po
deleted file mode 100644
index e9d6ece..0000000
--- a/po/vi/multiwan.po
+++ /dev/null
@@ -1,115 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/vi/ntpc.po b/po/vi/ntpc.po
deleted file mode 100644
index 4de0971..0000000
--- a/po/vi/ntpc.po
+++ /dev/null
@@ -1,57 +0,0 @@
-#  ntpc.pot
-#  generated from ./applications/luci-ntpc/luasrc/i18n/ntpc.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2009-08-13 03:46+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Clock Adjustment"
-msgstr "Điều chỉnh đồng hồ"
-
-#, fuzzy
-msgid "Count of time measurements"
-msgstr "Đếm thời gian"
-
-msgid "Current system time"
-msgstr "Thời gian hiện tại của hệ thống"
-
-msgid "General"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-#, fuzzy
-msgid "Offset frequency"
-msgstr "tần số offset "
-
-msgid "Port"
-msgstr ""
-
-msgid "Synchronizes the system time"
-msgstr "Đồng bộ hóa giờ hệ thống"
-
-msgid "Time Server"
-msgstr ""
-
-#, fuzzy
-msgid "Time Servers"
-msgstr "Giờ server"
-
-msgid "Time Synchronisation"
-msgstr "Thời gian đồng bộ hóa"
-
-#, fuzzy
-msgid "Update interval (in seconds)"
-msgstr "Cập nhật Interval (giây)"
-
-msgid "empty = infinite"
-msgstr "Rỗng = Vô tận"
diff --git a/po/vi/olsr.po b/po/vi/olsr.po
deleted file mode 100644
index 0376b74..0000000
--- a/po/vi/olsr.po
+++ /dev/null
@@ -1,585 +0,0 @@
-#  olsr.pot
-#  generated from ./applications/luci-olsr/luasrc/i18n/olsr.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-16 12:39+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Active MID announcements"
-msgstr "Thông báo của các MID đang hoạt động"
-
-msgid "Active OLSR nodes"
-msgstr "Những OLSR nodes đang hoạt động"
-
-msgid "Active host net announcements"
-msgstr "Thông báo của mạng host đang hoạt động"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr "Mạng lưới thông báo"
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr "Expected retransmission count"
-
-msgid "FIB metric"
-msgstr "FIB metric"
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr "Cài đặt tổng quát"
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr "Khoảng HNA"
-
-msgid "HNA validity time"
-msgstr "Thời gian hợp lệ hóa HNA "
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr "Vùng xin chào"
-
-msgid "Hello validity time"
-msgstr "Thời gian hợp lệ hóa lời chào"
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr "IPv4 broadcast"
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr "Internet protocol"
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr "Tuyến OLRS đã biết"
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr "LQ aging"
-
-msgid "LQ algorithm"
-msgstr "LQ algorithm"
-
-msgid "LQ fisheye"
-msgstr "LQ fisheye"
-
-msgid "LQ level"
-msgstr "LQ level"
-
-msgid "Last hop"
-msgstr "Hop cuối "
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr "Thư viện "
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr "Giao diện địa phương IP"
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr "Khoảng MID"
-
-msgid "MID validity time"
-msgstr "Thời gian hợp lệ hóa MID"
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-"Bảo đảm là OLSRd đang vận hành, the &amp;quot;txtinfo&amp;quot; plugin được "
-"tải, định cấu hình trên cổng 2006 và chấp nhận kết nối từ &amp;"
-"quot;127.0.0.1&amp;quot;."
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr "Lận cận IP"
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr "Netmask"
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr "OLSR - HNA - Thông báo"
-
-msgid "OLSR - Plugins"
-msgstr "OLSR - Plugins"
-
-msgid "OLSR Daemon"
-msgstr "OLSR Daemon"
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr "Kết nối OLSR"
-
-msgid "OLSR gateway"
-msgstr "Cổng OLSR"
-
-msgid "OLSR node"
-msgstr "OLSR node"
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr "Tổng quát về các thông báo của mạng host đang hoạt động"
-
-msgid "Overview of currently established OLSR connections"
-msgstr "Tổng quát về kết nối OLSR hiện tại "
-
-msgid "Overview of currently known OLSR nodes"
-msgstr "Tổng quát của các OLSR nodes đã biết hiện tại"
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr "Tổng quát của các tuyến đã biết hiện tại tới những OLSR nodes khác"
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr "Tổng quát về thông báo của nhiều giao diện đã biết"
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr "Cấu hình Plugin"
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr "Pollrate"
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr "Tiền tố"
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr "Giao diện OLSR thứ nhì"
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr "Khoảng TC"
-
-msgid "TC validity time"
-msgstr "Thời gian hợp lệ hóa TC"
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr "Không thể kết nối với OLSR daemon!"
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr "Dùng hysteresis"
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr "Sẵn sàng"
diff --git a/po/vi/openvpn.po b/po/vi/openvpn.po
deleted file mode 100644
index da4e4f2..0000000
--- a/po/vi/openvpn.po
+++ /dev/null
@@ -1,552 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-16 12:27+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', or 'subnet'"
-
-msgid "Accept options pushed from server"
-msgstr "Chấp nhận tùy chọn được đảy từ server"
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr "Thêm tuyến sau khi kết nối thành lập"
-
-msgid "Additional authentication over TLS"
-msgstr "Xác thực bổ xung trên TLS"
-
-msgid "Allow client-to-client traffic"
-msgstr "Cho phép lưu thông đối tượng - đến - đối tượng"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "Cho phép nhiều đối tượng với cùng một chứng chỉ"
-
-msgid "Allow only one session"
-msgstr "Chỉ cho phép một session"
-
-msgid "Allow remote to change its IP or port"
-msgstr "Cho phép đối tượng ngoài vùng thay đổi IP hoặc cổng"
-
-msgid "Allowed maximum of connected clients"
-msgstr "Cho phép tối đa đối tượng kết nối mới là"
-
-msgid "Allowed maximum of internal"
-msgstr "Internal tối đa được cho phép"
-
-msgid "Allowed maximum of new connections"
-msgstr "Cho phép tối đa kết nối mới là"
-
-msgid "Append log to file"
-msgstr "Nối thêm log lên tập tin"
-
-msgid "Authenticate using username/password"
-msgstr "Xác thực username/password đang sử dụng"
-
-msgid "Automatically redirect default route"
-msgstr "Tự động chuyển hướng tuyến mặc định"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-"Dưới đây là một list của OpenVPN instances đã được cấu hình và tình trạng "
-"hiện tại"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "Call down cmd/script trước khi TUN/TAP đóng"
-
-msgid "Certificate authority"
-msgstr "Giấy chứng nhận ủy quyền"
-
-msgid "Change process priority"
-msgstr "Thay đổi quy trình ưu tiên"
-
-msgid "Change to directory before initialization"
-msgstr "Chuyển qua thư mục trước khi khởi tạo"
-
-msgid "Check peer certificate against a CRL"
-msgstr "Kiểm tra chứng chỉ đối tác với một CRL"
-
-msgid "Chroot to directory after initialization"
-msgstr "Chroot vào thư mục sau khi khởi tạo"
-
-msgid "Client is disabled"
-msgstr "Đối tượng bị vô hiệu hóa"
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr "Định cấu hình chế độ đối tượng "
-
-msgid "Configure server bridge"
-msgstr "Định cấu hình cầu nối server"
-
-msgid "Configure server mode"
-msgstr "Định cấu hình chế độ server"
-
-msgid "Connect through Socks5 proxy"
-msgstr "Kết nối qua Socks5 proxy"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr "Khoảng thử kết nối"
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr "Daemonize sau khi khởi tạo"
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "Trì hoãn tun/tap mở và up script execution"
-
-msgid "Diffie Hellman parameters"
-msgstr "Tham số Diffie Hellman "
-
-msgid "Directory for custom client config files"
-msgstr "Dạnh mục cho các tập tin config đối tương tùy chỉnh"
-
-msgid "Disable Paging"
-msgstr "Vô hiệu hóa Paging"
-
-msgid "Disable cipher initialisation vector"
-msgstr "Vô hiệu hóa cipher initialisation vector"
-
-msgid "Disable options consistency check"
-msgstr "Vô hiệu hóa tùy chọn kiểm tra nhất quán"
-
-msgid "Disable replay protection"
-msgstr "Vô hiệu hóa replay protection"
-
-msgid "Do not bind to local address and port"
-msgstr "Đừng đóng kết địa chỉ địa phương và cổng"
-
-msgid "Don't actually execute ifconfig"
-msgstr "Đừng thực sự thực hiện ifconfig"
-
-msgid "Don't add routes automatically"
-msgstr "Đừng tự động thêm vào đường dẫn"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "Don't cache --askpass or --auth-user-pass passwords"
-
-msgid "Don't inherit global push options"
-msgstr "Đừng thừa hưởng tùy chọn đẩy toàn cầu"
-
-msgid "Don't log timestamps"
-msgstr "Đừng log timestamps"
-
-msgid "Don't re-read key on restart"
-msgstr "Đừng đọc lại key ở chế độ khởi động "
-
-msgid "Don't require client certificate"
-msgstr "Đừng yêu câu  chứng chỉ đối tượng"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "Đừng dùng bộ nén lzo thích ứng"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "Đừng cảnh báo về sự không nhất quán của ifconfig"
-
-msgid "Echo parameters to log"
-msgstr "Báo tham số lên log"
-
-msgid "Empirically measure MTU"
-msgstr "Đo MTU"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "Kích hoạt OpenSSL hardware crypto engines"
-
-msgid "Enable Path MTU discovery"
-msgstr "Kích hoạt khám phá đường dẫn MTU"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "Kích hoạt chế độ mã hóa khóa tĩnh (non-TLS)"
-
-msgid "Enable TLS and assume client role"
-msgstr "Kích hoạt TLS và giả định vải trò của client"
-
-msgid "Enable TLS and assume server role"
-msgstr "Kích hoạt TLS và giả định vải trò của server"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "Kích hoạt internal datagram fragmentation"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "Kích hoạt giao diện điều hành trên <em>IP</em> <em>cổng</em>"
-
-msgid "Enabled"
-msgstr "Kích hoạt "
-
-msgid "Encryption cipher for packets"
-msgstr "Encryption cipher cho các gói"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "Thực hiện shell cmd sau khi tuyến đã thêm vào"
-
-msgid "Execute shell command on remote ip change"
-msgstr "Thực hiện lệnh shell trên ip thay đổi từ xa"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr "Exit trên TLS khi thương lượng thất bại"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "Lấy mật mã PEM từ điều khiển tty trước khi chúng ta daemonize"
-
-msgid "HMAC authentication for packets"
-msgstr "Sự xác thực HMAC cho gói"
-
-msgid "Handling of authentication failures"
-msgstr "Xử lý những sai soát khi xác thực "
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr "Nếu hostname resolve thất bại, thử lại"
-
-msgid "Instance \"%s\""
-msgstr "Instance \"%s\""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr "Giữ địa chỉ IP ở chế độ khởi động"
-
-msgid "Keep remote IP address on restart"
-msgstr "Giữ remote địa chỉ IP ở chế độ khởi động"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "Giữ công cụ tun/tap mở khi khởi động lại  "
-
-msgid "Key transition window"
-msgstr "Key transition window"
-
-msgid "Limit repeated log messages"
-msgstr "Giới hạn lập log tin nhắn"
-
-msgid "Local certificate"
-msgstr "Chứng chỉ địa phương"
-
-msgid "Local host name or ip address"
-msgstr "Tên host địa phương và địa chỉ IP"
-
-msgid "Local private key"
-msgstr "Phím bảo mật địa phương"
-
-msgid "Major mode"
-msgstr "Chế độ chính"
-
-msgid "Make tun device IPv6 capable"
-msgstr "Làm cho tun công cụ IPv6 có khả năng"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "Số lượng tối đa của queued TCP output packets"
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr "Số lượng phân bổ phát sóng buffers"
-
-msgid "Number of lines for log file history"
-msgstr "Số dòng cho tập tin log history"
-
-msgid "Only accept connections from given X509 name"
-msgstr "Chỉ chấp nhận kết nối từ những tên X509 cho sẵn"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "Chỉ xử lý ping timouts nếu tuyến tồn tại"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "OpenVPN instances"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "Tối ưu hóa TUN/TAP/UDP writes"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "Output tới syslog và đừng daemonize"
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr "PKCS # 12 tập tin có chứa key"
-
-msgid "Pass environment variables to script"
-msgstr "Bỏ qua yếu tố môi trường tới script"
-
-msgid "Persist replay-protection state"
-msgstr "Tiếp tục tình trạng replay-protection"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "Persist/unpersist ifconfig-pool"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "Ping remote mỗi n giây trên cổng TCP/UDP"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "Cổng"
-
-msgid "Protocol"
-msgstr "Protocol"
-
-msgid "Proxy timeout in seconds"
-msgstr "Proxy timeout in seconds"
-
-msgid "Push an ifconfig option to remote"
-msgstr "Đảy một tùy chọn ifconfig tới remote"
-
-msgid "Push options to peer"
-msgstr "Đẩy lựa chọn cho đối tác"
-
-msgid "Query management channel for private key"
-msgstr "Tra vấn kênh điều hành cho phím bảo mật "
-
-msgid "Randomly choose remote server"
-msgstr "Ngẫu nhiên chọn server ngoài vùng"
-
-msgid "Refuse connection if no custom client config"
-msgstr "Từ chối kết nối nêu không có config đối tượng tùy chỉnh"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "Remap tín hiệu SIGUSR1"
-
-msgid "Remote host name or ip address"
-msgstr "Tên host ngoài vùng và địa chỉ IP"
-
-msgid "Remote ping timeout"
-msgstr "PING timeout từ xa"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "Thương lượng lại data chan. key sau bytes"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "Thương lượng lại data chan. key sau packets"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "Thương lượng lại data chan. key sau seconds"
-
-msgid "Replay protection sliding window size"
-msgstr "Replay chế độ bảo vệ kích thước window trượt"
-
-msgid "Require explicit designation on certificate"
-msgstr "Yêu cầu rõ ràng về giấy chứng nhận "
-
-msgid "Require explicit key usage on certificate"
-msgstr "Yêu cầu key dùng rõ rãng trên chứng nhận"
-
-msgid "Restart after remote ping timeout"
-msgstr "Khởi động lại sau khi remote ping timeout"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "Retransmit timeout trên kênh kiểm soát TLS"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "Thử lại trên HTTP proxy lỗi"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "Thử lại trên Socks proxy lỗi"
-
-msgid "Route subnet to client"
-msgstr "Tuyến subnet tới khách hàng"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "Chạy như inetd hoặc xinetd server"
-
-msgid "Run script cmd on client connection"
-msgstr "Chạy script cmd trên đối tượng kết nối"
-
-msgid "Run script cmd on client disconnection"
-msgstr "Chạy script cmd trên đối tượng không kết nối"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "Chạy up/down scripts cho tất cả khởi động"
-
-msgid "Send notification to peer on disconnect"
-msgstr "Gửi thông báo cho bạn bè về ngắt kết nối"
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr "Cài đặt GID tới nhóm"
-
-msgid "Set TCP/UDP MTU"
-msgstr "Cài đặt TCP/UDP MTU"
-
-msgid "Set UID to user"
-msgstr "Cài đặt UID tới người dùng"
-
-msgid "Set aside a pool of subnets"
-msgstr "Để sang một bên một pool của subnets"
-
-msgid "Set extended HTTP proxy options"
-msgstr "Thiết lập các tùy chọn mở rộng HTTP proxy"
-
-msgid "Set output verbosity"
-msgstr "Đặt output verbosity"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr "Đặt dung lượng của bảng address hash thực và ảo"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "Đặt TCP/UDP nhận dung lượng buffer"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "Đặt TCP/UDP gửi dung lượng buffer"
-
-msgid "Set tun/tap TX queue length"
-msgstr "Đặt tun/tap độ dài queue"
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr "Đặt công cụ tun/tap MTU"
-
-msgid "Set tun/tap device overhead"
-msgstr "Đặt thiết bị tun/tap overhead"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "Đặt upper bound trên TCP MSS"
-
-msgid "Shaping for peer bandwidth"
-msgstr "Shaping cho peer bandwidth"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "Shell cmd để thực thi sau khi thiết bị tun mở"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "Shell cmd để chạy sau khi thiết bị tun đóng"
-
-msgid "Shell command to verify X509 name"
-msgstr "Shell command để hợp thức hóa tên X509 "
-
-msgid "Silence the output of replay warnings"
-msgstr "Silence the output của các cảnh báo reply"
-
-msgid "Size of cipher key"
-msgstr "Dung lượng của cipher key"
-
-msgid "Specify a default gateway for routes"
-msgstr "Chỉ định một cổng mặc định cho tuyến"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "Bắt đầu OpenVPN trong một hibernating state"
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr "Bắt đầu"
-
-msgid "Status file format version"
-msgstr "Tình trạng tập tin phiên bản format"
-
-msgid "Switch to advanced configuration »"
-msgstr "Chuyển sang cấu hình cấp cao"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "Cổng TCP/UDP # cho cả địa phương và ngoài vùng"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "Cổng TCP/UDP # cho địa phương (default=1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "Cổng TCP/UDP # cho ngoài vùng (default=1194)"
-
-msgid "TLS cipher"
-msgstr "TLS cipher"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "TOS passthrough (chỉ áp dụng cho IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "Danh mục tạm thời cho tập tin client-connect return"
-
-msgid "Timeframe for key exchange"
-msgstr "Timeframe cho trao đổi key"
-
-msgid "Type of used device"
-msgstr "Loại công cụ sử dụng"
-
-msgid "Use fast LZO compression"
-msgstr "Dùng LZO nén nhanh"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "Nên dùng địa chỉ cá nhân hơn là /30 subnets"
-
-msgid "Use protocol"
-msgstr "Dùng protocol"
-
-msgid "Use tun/tap device node"
-msgstr "Dùng chế độ công cụ tun/tap"
-
-msgid "Use username as common name"
-msgstr "Dùng tên đăng nhập như tên thông thường"
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr "Viết log lên tập tin"
-
-msgid "Write process ID to file"
-msgstr "Viết xử lý ID lên tập tin"
-
-msgid "Write status to file every n seconds"
-msgstr "Viết tình trạng tới tập tin mỗi n giây"
-
-msgid "no"
-msgstr "không"
-
-msgid "tun/tap device"
-msgstr "Công cụ tun/tap"
-
-msgid "tun/tap inactivity timeout"
-msgstr "tun/tap timeout không có hành động"
-
-msgid "yes (%i)"
-msgstr "Có (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "Chuyển sang cấu hình căn bản"
diff --git a/po/vi/p2pblock.po b/po/vi/p2pblock.po
deleted file mode 100644
index 4bad090..0000000
--- a/po/vi/p2pblock.po
+++ /dev/null
@@ -1,42 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: \n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: \n"
-"Last-Translator: Manuel Munz <freifunk@somakoma.de>\n"
-"Language-Team: \n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Block Time"
-msgstr "Thá»i gian Block"
-
-msgid "Enable P2P-Block"
-msgstr "KÃ­ch hoáº¡t P2P-Block"
-
-msgid "IP-P2P"
-msgstr "IP-P2P"
-
-msgid "Layer7-Protocols"
-msgstr "Layer7-protocols"
-
-msgid "P2P-Block"
-msgstr "P2P-Block"
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-"P2P-Block lÃ  má»t cÆ¡ cháº¿ greylisting Äá» cháº·n cÃ¡c peer-to-peer "
-"protocols cho khÃ¡ch hÃ ng khÃ´ng náº±m trÃªn whitelisted."
-
-msgid "Portrange"
-msgstr "Portrange"
-
-msgid "Whitelisted IPs"
-msgstr "Whitelisted IPs"
-
-msgid "seconds"
-msgstr "giÃ¢y"
diff --git a/po/vi/p910nd.po b/po/vi/p910nd.po
deleted file mode 100644
index c8c66d1..0000000
--- a/po/vi/p910nd.po
+++ /dev/null
@@ -1,46 +0,0 @@
-#  p910nd.pot
-#  generated from ./applications/luci-p910nd/luasrc/i18n/p910nd.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-13 04:03+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Bidirectional mode"
-msgstr "Chế độ 2 chiều"
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-"Trước tiên, bạn cần phải cài đặt các gói để hỗ trợ cho cổng USB (kmod-usb-"
-"in), hoặc cổng song song (kmod-lp)."
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr "p910nd - Máy in chủ"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr "p910nd tiếp thu ở cổng 910+N. E.g. 9100 cho máy in đầu tiên."
diff --git a/po/vi/pbx-voicemail.po b/po/vi/pbx-voicemail.po
deleted file mode 100644
index 19e26bf..0000000
--- a/po/vi/pbx-voicemail.po
+++ /dev/null
@@ -1,88 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/vi/pbx.po b/po/vi/pbx.po
deleted file mode 100644
index 98819b7..0000000
--- a/po/vi/pbx.po
+++ /dev/null
@@ -1,449 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/vi/polipo.po b/po/vi/polipo.po
deleted file mode 100644
index 0765db3..0000000
--- a/po/vi/polipo.po
+++ /dev/null
@@ -1,290 +0,0 @@
-#  polipo.pot
-#  generated from ./applications/luci-polipo/luasrc/i18n/polipo.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-13 07:49+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr "Đối tượng cho phép"
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-"Sự chứng thực HTTP Cơ bản được hỗ trợ. Cung cấp tên người dùng và mật khẩu "
-"trong tên người dùng: mật khẩu định dạng"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr "Địa chỉ tên miền máy chủ"
-
-msgid "Delete cache files time"
-msgstr "Xóa tập tin cạc khi"
-
-msgid "Disk cache location"
-msgstr "Vị trí cạc đĩa"
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr "Kích hoạt nếu cạc được chia rẻ bởi nhiều người dùng."
-
-msgid "First PMM segment size (in bytes)"
-msgstr "Dung lượng phân đoạn PMM đầu tiên (in bytes)"
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr "Bao nhiêu RAM Polipo nên dùng cho cạc."
-
-msgid "In RAM cache size (in bytes)"
-msgstr "Trong RAM dung lượng cạc (tính theo bytes)"
-
-msgid "Listen address"
-msgstr "Địa chỉ nge"
-
-msgid "Listen port"
-msgstr "Cổng nghe"
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-"Vị trị mà polipo sẽ định các tập tin thường xuyên. Sử dụng thiết bị nhớ "
-"ngoài được khuyến khích, bởi vì cạc có thể lớn lên đáng kể. Để lại nó trống "
-"để vô hiệu hóa Trên cạc trên đĩa."
-
-msgid "Log file location"
-msgstr "Vị trí tập tin sổ ghi"
-
-msgid "Log to syslog"
-msgstr "Log to syslog"
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr "Cạc trên ổ đĩa"
-
-msgid "PMM segments size (in bytes)"
-msgstr "Dung lượng phân đoạn PMM (in bytes)"
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr "Địa chỉ parent proxy "
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-"Địa chỉ parent proxy (in host:port format), cái mà Polipo sẽ chuyển yêu cầu "
-"tới."
-
-msgid "Parent proxy authentication"
-msgstr "Xác thực parent proxy "
-
-msgid "Polipo"
-msgstr "Polipo"
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr "Polipo là một web proxy nhỏ và nhanh caching."
-
-msgid "Poor Man's Multiplexing"
-msgstr "Poor Man&amp;#39;s Multiplexing"
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-"Poor Man&amp;#39;s Multiplexing (PMM) là một kỹ thuật kích thích "
-"multiplexing bằng cách yêu cầu trường hợp trong nhiều phân đoạn. Nó cố gắng "
-"hạ thấp sự trễ nãi do các điểm yếu HTTP protocol gây ra. Chú ý: một số trang "
-"web có thể không hoạt động với PMM bật."
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr "Tra vấn DNS bằng hostname"
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr "Tra vấn DNS cho IPv6"
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-"Cài đặt địa chỉ tên miền máy chủ để sử dụng, nếu bạn muốn Polipo dùng tên "
-"miền khác với hệ thông chính. "
-
-msgid "Shared cache"
-msgstr "Cạc trên ổ đĩa"
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-"Dung lượng của phân đoạn PMM đầu tiên. Nếu không định nghĩa sẽ mặc định dung "
-"lượng của phân đoạn PMM gấp 2 lần"
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr "Syslog facility"
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-"Giao diện mà Polipo sẽ nghe. Để nghe trên tất cả các giao diện dùng 0.0.0.0 "
-"hoặc :: (IPv6)"
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr "Bỏ bớt những tập tin cạc với dung lượng  (bytes)"
-
-msgid "Truncate cache files time"
-msgstr "Cắt bỏ tập tin cạc khi"
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-"Nên dùng bộ nhớ ngoài bởi vì tập tin sổ ghi được viết rất nhiều lần và có "
-"thể phát tán rất mạnh. "
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid ""
-#~ "To enable polipo on-disk cache cleaning (highly recommended), you should "
-#~ "add a cron job in Scheduled Tasks services that will execute /usr/sbin/"
-#~ "polipo_purge script. For example to perform disk cache cleanup every day "
-#~ "at 6:00 in the morning you should add the following line in Scheduled "
-#~ "Tasks \"0 6 * * *\\t/usr/sbin/polipo_purge\" (without quotes)."
-#~ msgstr ""
-#~ "Để kích hoạt tính năng làm sạch trên cạc đĩa polipo (rất khuyến khích), "
-#~ "bạn nên thêm vào một công việc cron trong những công tác đã schedule, nó "
-#~ "sẽ thực hiện / usr / sbin / polipo_purge script. Ví dụ: để thực hiện các "
-#~ "đĩa bộ nhớ cache mỗi ngày vào lúc 6:00 sáng, bạn nên thêm dòng sau trong "
-#~ "Scheduled công việc &amp;quot;0 6 * * * /usr/sbin/polipo_purge&amp;quot; "
-#~ "(không có dấu ngoặc kép)."
-
-#~ msgid ""
-#~ "Size to which cached files should be truncated. (default value: 1048576)"
-#~ msgstr "Dung lượng mà những tập tin cạc bị cắt bỏ. (Giá trị: 1048576)"
-
-#~ msgid ""
-#~ "Time after which cached files will be truncated. (default value: 4d12h)"
-#~ msgstr "Thời gian khi tập tin cạc sẽ bị cắt bỏ (Giá trị: 4d12h)"
-
-#~ msgid "Time after which cached files will be deleted. (default value: 32d)"
-#~ msgstr "Thời gian khi tập tin cạc sẽ bị xóa. (Giá trị: 32d)"
-
-#~ msgid "General"
-#~ msgstr "Tổng quát"
-
-#~ msgid ""
-#~ "When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-#~ "that are allowed to connect. The format is IP address or network address "
-#~ "(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-#~ msgstr ""
-#~ "Khi nghe địa chỉ được đặt ở 0.0.0.0 hoặc :: (IPv6), bạn phải liệt kê "
-#~ "những đối tượng được phép kết nối. Định dạng là địa chỉ IP hoặc địa chỉ "
-#~ "mạng (192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))."
-
-#~ msgid ""
-#~ "false = Do not query IPv6; reluctantly = Query both, prefer IPv4; happily "
-#~ "= Query both, prefer IPv6; true = Query only IPv6"
-#~ msgstr ""
-#~ "False = Đừng truy vấn IPv6; reluctantly = Truy vấn cả hai, IPv4 được "
-#~ "chuộng hơn; happily = truy vấn cả hai, IPv6 chuộng hơn; true = chỉ truy "
-#~ "vấn IPv6"
-
-#~ msgid ""
-#~ "false = Never use system DNS resolver; reluctantly = Query DNS directly, "
-#~ "if DNS server is unavailable fail to system DNS resolver; happily = Query "
-#~ "DNS directly, if host could not be found fallback to system DNS resolver; "
-#~ "true = Always use system DNS resolver"
-#~ msgstr ""
-#~ "false = Đừng bao giờ dùng bộ phân tích hệ thống DNS; reluctantly = Truy "
-#~ "vấn DNS trực tiếp, nếu DNS server không có sẵn trong bộ phân tích hệ "
-#~ "thống DNS; happily = truy vấn DNS trực tiếp, nếu host bị đẩy lùi so với "
-#~ "bộ phân tích hệ thống DNS; true = Luân luân dùng bộ phân tích hệ thống DNS"
-
-#~ msgid "Port on which Polipo will listen. (default value: 8123)"
-#~ msgstr "Cổng mà Polipo sẽ nghe. (giá trị: 8123)"
-
-#~ msgid "polipo_pmm_pmmsize_desc"
-#~ msgstr ""
-#~ "Để kích hoạt PMM, dung lượng phân đoạn PMM phải được đặt những giá trị "
-#~ "dương."
diff --git a/po/vi/qos.po b/po/vi/qos.po
deleted file mode 100644
index 4ef0f72..0000000
--- a/po/vi/qos.po
+++ /dev/null
@@ -1,128 +0,0 @@
-#  qos.pot
-#  generated from ./applications/luci-qos/luasrc/i18n/qos.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2009-08-13 03:56+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#, fuzzy
-msgid "Calculate overhead"
-msgstr "Tính toán tổng quát"
-
-#, fuzzy
-msgid "Classification Rules"
-msgstr "Phân loại"
-
-#, fuzzy
-msgid "Classification group"
-msgstr "Phân loại"
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-#, fuzzy
-msgid "Half-duplex"
-msgstr "Half-Duplex"
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-#, fuzzy
-msgid "Ports"
-msgstr "Ưu tiên"
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr "Chất lượng dịch vụ "
-
-msgid "Service"
-msgstr ""
-
-#, fuzzy
-msgid "Source host"
-msgstr "Địa chỉ nguồn"
-
-#, fuzzy
-msgid "Target"
-msgstr "Địa chỉ mục tiêu"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-#, fuzzy
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-"Với QoS, bạn có thể ưu tiên cho mạng lưới giao thông được chọn bởi địa chỉ, "
-"cổng hay dịch vụ."
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr "cấp tốc"
-
-msgid "low"
-msgstr "thấp"
-
-msgid "normal"
-msgstr "bình thường"
-
-msgid "priority"
-msgstr "ưu tiên"
-
-msgid "qos_connbytes"
-msgstr ""
-
-#~ msgid "Prioritization"
-#~ msgstr "Quá trình ưu tiên"
-
-#~ msgid "source network / source host"
-#~ msgstr "nguồn mạng/ nguồn host"
-
-#~ msgid "target network / target host"
-#~ msgstr "Mục tiêu mạng/ mục tiêu host"
-
-#~ msgid "portrange"
-#~ msgstr "portrange"
-
-#~ msgid "Bytes sent"
-#~ msgstr "Bytes đã gửi"
diff --git a/po/vi/radvd.po b/po/vi/radvd.po
deleted file mode 100644
index 8e0fb01..0000000
--- a/po/vi/radvd.po
+++ /dev/null
@@ -1,368 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-21 04:06+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/vi/rrdtool.po b/po/vi/rrdtool.po
deleted file mode 100644
index ca94cf8..0000000
--- a/po/vi/rrdtool.po
+++ /dev/null
@@ -1,524 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:59+0200\n"
-"PO-Revision-Date: 2009-08-13 14:45+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
-
-#~ msgid "%H: Wireless - Signal Noise Ratio"
-#~ msgstr "%H: Wireless - Signal Noise Ratio"
-
-#~ msgid "dBm"
-#~ msgstr "dBm"
-
-#~ msgid "Noise Level"
-#~ msgstr "Noise Level"
-
-#~ msgid "Signal Strength"
-#~ msgstr "Độ mạnh của tín hiệu"
-
-#~ msgid "%H: Wireless - Signal Quality"
-#~ msgstr "%H: Wireless -Chất lượng tín hiệu"
-
-#~ msgid "n"
-#~ msgstr "n"
-
-#~ msgid "Signal Quality"
-#~ msgstr "Chất lượng tín hiệu "
-
-#~ msgid "%H: ICMP Roundtrip Times"
-#~ msgstr "%H: ICMP thời gian đi một vòng"
-
-#~ msgid "ms"
-#~ msgstr "ms"
-
-#~ msgid "%H: Firewall - Processed Packets"
-#~ msgstr "%H: Firewall - Gói đã xử lý"
-
-#~ msgid "Chain \"%di\""
-#~ msgstr "Chuỗi \"%di\""
-
-#~ msgid "%H: Netlink - Transfer on %pi"
-#~ msgstr "%H: Netlink - chuyển về %pi"
-
-#~ msgid "Bytes (%ds)"
-#~ msgstr "Bytes (%ds)"
-
-#~ msgid "%H: Netlink - Packets on %pi"
-#~ msgstr "%H: Netlink - Đóng gói trên %pi"
-
-#~ msgid "Processed (%ds)"
-#~ msgstr "Đã xử lý (%ds)"
-
-#~ msgid "Dropped (%ds)"
-#~ msgstr ""
-#~ "Dropped<span class=\"translation-space\"> </span>\n"
-#~ "<span class=\"translation-space\"> </span>\n"
-#~ "<span class=\"translation-space\"> </span>\n"
-#~ "(%ds)"
-
-#~ msgid "Errors (%ds)"
-#~ msgstr ""
-#~ "Lỗi<span class=\"translation-space\"> </span>\n"
-#~ "<span class=\"translation-space\"> </span>\n"
-#~ "<span class=\"translation-space\"> </span>\n"
-#~ "<span class=\"translation-space\"> </span>\n"
-#~ "(%ds)"
-
-#~ msgid "%H: Netlink - Multicast on %pi"
-#~ msgstr "%H: Netlink - Multicast on %pi"
-
-#~ msgid "Packets"
-#~ msgstr "Gói"
-
-#~ msgid "%H: Netlink - Collisions on %pi"
-#~ msgstr "%H: Netlink - Collisions on %pi"
-
-#~ msgid "Collisions/s"
-#~ msgstr "Collisions/s"
-
-#~ msgid "Collisions"
-#~ msgstr "Collisions"
-
-#~ msgid "%H: Netlink - Errors on %pi"
-#~ msgstr "%H: Netlink - lỗi trên %pi"
-
-#~ msgid "Errors/s"
-#~ msgstr "Lỗi"
-
-#~ msgid "%H: Processes"
-#~ msgstr "%H: Quá trình"
-
-#~ msgid "Processes/s"
-#~ msgstr "Quy trình"
-
-#~ msgid "%H: Process %pi - used cpu time"
-#~ msgstr "%H: Quá trình %pi - thời gian cpu đã sử dụng"
-
-#~ msgid "Jiffies"
-#~ msgstr "Jiffies"
-
-#~ msgid "System"
-#~ msgstr "Hệ thống"
-
-#~ msgid "user"
-#~ msgstr "Người dùng"
-
-#~ msgid "%H: Process %pi - threads and processes"
-#~ msgstr "%H: quá trình %pi - các luồng và quá trình"
-
-#~ msgid "Count"
-#~ msgstr "Đếm"
-
-#~ msgid "%H: Process %pi - page faults"
-#~ msgstr "%H: quá trình %pi - lỗi trang"
-
-#~ msgid "Pagefaults"
-#~ msgstr "Pagefaults"
-
-#~ msgid "page faults"
-#~ msgstr "page faults"
-
-#~ msgid "%H: Process %pi - virtual memory size"
-#~ msgstr "%H: quá trình %pi - dung lượng bộ nhớ ảo "
-
-#~ msgid "virtual memory"
-#~ msgstr "Bộ nhớ ảo"
-
-#~ msgid "%H: Usage on Processor #%pi"
-#~ msgstr "%H: sử dụng trên bộ xử lý #%pi"
-
-#~ msgid "%"
-#~ msgstr "%"
-
-#~ msgid "%H: Transfer on %di"
-#~ msgstr "%H: Chuyển tải trên %di"
-
-#~ msgid "%H: Packets on %di"
-#~ msgstr "%H: Gói trên %di"
-
-#~ msgid "%H: TCP-Connections to Port %pi"
-#~ msgstr "%H: TCP-kết nối tới cổng %pi"
-
-#~ msgid "Connections/s"
-#~ msgstr "Kết nối"
-
-#~ msgid "%H: Disk Space Usage on %di"
-#~ msgstr "%H: sử dụng không gian trên đĩa ở %di"
-
-#~ msgid "%H: Interrupts"
-#~ msgstr "%H: Cắt ngang"
-
-#~ msgid "Issues/s"
-#~ msgstr "Vấn đề"
-
-#~ msgid "IRQ %di"
-#~ msgstr "IRQ %di"
-
-#~ msgid "%H: System Load"
-#~ msgstr "%H: Tải hệ thống"
-
-#~ msgid "Load"
-#~ msgstr "Tải"
-
-#~ msgid "1 min"
-#~ msgstr "1 phút"
-
-#~ msgid "5 min"
-#~ msgstr "5 phút"
-
-#~ msgid "15 min"
-#~ msgstr "15 phút"
diff --git a/po/vi/samba.po b/po/vi/samba.po
deleted file mode 100644
index 4e5638d..0000000
--- a/po/vi/samba.po
+++ /dev/null
@@ -1,96 +0,0 @@
-#  samba.pot
-#  generated from ./applications/luci-samba/luasrc/i18n/samba.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:59+0200\n"
-"PO-Revision-Date: 2009-08-13 03:54+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-#, fuzzy
-msgid "Allow guests"
-msgstr "Cho phép khách"
-
-#, fuzzy
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-"Những người sử dụng hệ thống có thể tiếp cận những thư mục tại nhà thông qua "
-"mạng lưới chia sẻ trực tuyến."
-
-#, fuzzy
-msgid "Allowed users"
-msgstr "Người sử dụng được cho phép"
-
-#, fuzzy
-msgid "Create mask"
-msgstr "Tạo Mask"
-
-msgid "Description"
-msgstr "Mô tả"
-
-#, fuzzy
-msgid "Directory mask"
-msgstr "Thư mục Mask"
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr "tên máy chủ"
-
-msgid "Mask for new directories"
-msgstr "Mask cho thư mục mới"
-
-msgid "Mask for new files"
-msgstr "Mask cho tập tin mới"
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr "Mạng chia sẻ"
-
-msgid "Path"
-msgstr ""
-
-#, fuzzy
-msgid "Read-only"
-msgstr "Chỉ đọc "
-
-msgid "Share home-directories"
-msgstr "Chia sẻ danh bạ chính"
-
-msgid "Shared Directories"
-msgstr "Thư mục chia sẻ"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr "Nhóm làm việc "
-
-#~ msgid "Shared Directory"
-#~ msgstr "Đã chia sẻ thư mục"
-
-#~ msgid "Physical Path"
-#~ msgstr "Đường dẫn vật lý"
-
-#~ msgid "optional"
-#~ msgstr "Tùy thích"
diff --git a/po/vi/splash.po b/po/vi/splash.po
deleted file mode 100644
index 07c6712..0000000
--- a/po/vi/splash.po
+++ /dev/null
@@ -1,297 +0,0 @@
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/vi/statistics.po b/po/vi/statistics.po
deleted file mode 100644
index c853c8a..0000000
--- a/po/vi/statistics.po
+++ /dev/null
@@ -1,665 +0,0 @@
-#  statistics.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/statistics.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-16 05:50+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Action (target)"
-msgstr "Action (target)"
-
-msgid "Add command for reading values"
-msgstr "Thêm lệnh cho giá trị đang đọc"
-
-msgid "Add matching rule"
-msgstr "Thêm matching rule"
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr "Thêm lệnh thông báo"
-
-msgid "Base Directory"
-msgstr "Thư mục Cơ sở"
-
-msgid "Basic monitoring"
-msgstr "Monitoring căn bản"
-
-msgid "CPU Plugin Configuration"
-msgstr "Cấu hình Plugin CPU"
-
-msgid "CSV Output"
-msgstr "CSV Output"
-
-msgid "CSV Plugin Configuration"
-msgstr "Cấu hình CSV plugin"
-
-msgid "Cache collected data for"
-msgstr "Cache collected data cho"
-
-msgid "Cache flush interval"
-msgstr "Cache flush interval"
-
-msgid "Chain"
-msgstr "Chain"
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr "Collectd"
-
-msgid "Collectd Settings"
-msgstr "Những cài đặt collectd"
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-"Collectd là một daemon nhỏ để thu thập dữ liệu từ nhiều nguồn thông qua các "
-"plugins khác nhau. Trên trang này, bạn có thể thay đổi cài đặt tổng quát cho "
-"cai collectd daemon. "
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr "Cấu hình DF plugin"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS Plugin Configuration"
-msgstr "Cấu hình DNS plugin"
-
-msgid "Data collection interval"
-msgstr "Khoảng thu thập dữ liệu"
-
-msgid "Datasets definition file"
-msgstr "Tập tin định nghĩa cơ sở dữ liệu"
-
-msgid "Destination ip range"
-msgstr "Điểm đến ip range"
-
-msgid "Directory for collectd plugins"
-msgstr "Danh mục cho collectd plugins"
-
-msgid "Directory for sub-configurations"
-msgstr "Danh mục cho sub-configurations"
-
-msgid "Disk Plugin Configuration"
-msgstr "Cấu hình disk plugin"
-
-msgid "Disk Space Usage"
-msgstr "Khoảng trống trên đĩa"
-
-msgid "Disk Usage"
-msgstr "Disk Usage"
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr "Display timespan"
-
-msgid "E-Mail Plugin Configuration"
-msgstr "Cấu hình e-mail plugin"
-
-msgid "Email"
-msgstr "Email"
-
-msgid "Enable this plugin"
-msgstr "Kích hoạt plugin này"
-
-msgid "Exec"
-msgstr "Exec"
-
-msgid "Exec Plugin Configuration"
-msgstr "Cấu hình Exec Plugin"
-
-msgid "Filter class monitoring"
-msgstr "Filter class monitoring"
-
-msgid "Firewall"
-msgstr "Firewall"
-
-msgid "Flush cache after"
-msgstr "Flush cache sau khi"
-
-msgid "Forwarding between listen and server addresses"
-msgstr "chuyển tiếp giữa listen và địa chỉ server"
-
-msgid "Graphs"
-msgstr "Graphs"
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-"Ở đây bạn có thể định nghĩa các lệnh bên ngoài mà sẽ khởi động bằng collectd "
-"để đọc những giá trị nhất định. Những giá trị sẽ được đọc từ stdout"
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-"Ở đây bạn có thể định nghĩa các lệnh  bên ngoài cái mà bắt đầu bằng collectd "
-"khi những giá trị threshold nhất định được tiếp cận. Những giá trị dẫn tới "
-"invokation sẽ được feed tới một chương trình gọi là stdin"
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-"Ở đây bạn có thể định nghĩa những tiêu chuẩn khác nhau để monitor iptables "
-"rules được chọn."
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr "Tên host"
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr "Cấu hình IRQ Plugin "
-
-msgid "Ignore source addresses"
-msgstr "Lờ đi những địa chỉ nguồn"
-
-msgid "Incoming interface"
-msgstr "Giao diện đang tới"
-
-msgid "Interface Plugin Configuration"
-msgstr "Cấu hình giao diện plugin"
-
-msgid "Interfaces"
-msgstr "Giao diện"
-
-msgid "Interrupts"
-msgstr "Cắt ngang"
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr "cấu hình Iptables Plugin "
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr "Listen host"
-
-msgid "Listen port"
-msgstr "Listen port"
-
-msgid "Listener interfaces"
-msgstr "Giao diện listener"
-
-msgid "Load Plugin Configuration"
-msgstr "Tải cấu hình plugin"
-
-msgid "Maximum allowed connections"
-msgstr "Tối đã kết nối cho phép"
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr "Monitor tất cả local listen port"
-
-msgid "Monitor devices"
-msgstr "Monitor devices"
-
-msgid "Monitor disks and partitions"
-msgstr "Kiểm soát đĩa và phân vùng"
-
-msgid "Monitor filesystem types"
-msgstr "Kiểm soát loại filesystem"
-
-msgid "Monitor hosts"
-msgstr "Monitor hosts"
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr "Monitor interrupts"
-
-msgid "Monitor local ports"
-msgstr "Monitor cổng địa phương"
-
-msgid "Monitor mount points"
-msgstr "Monitor mount points"
-
-msgid "Monitor processes"
-msgstr "Monitor processes"
-
-msgid "Monitor remote ports"
-msgstr "Monitor remote ports"
-
-msgid "Name of the rule"
-msgstr "Tên của rule"
-
-msgid "Netlink"
-msgstr "Netlink"
-
-msgid "Netlink Plugin Configuration"
-msgstr "Cấu hình Netlink Plugin "
-
-msgid "Network"
-msgstr "Network"
-
-msgid "Network Plugin Configuration"
-msgstr "Cấu hình network plugin"
-
-msgid "Network plugins"
-msgstr "Network plugins"
-
-msgid "Network protocol"
-msgstr "Network protocol"
-
-msgid "Number of threads for data collection"
-msgstr "Số lượng các chủ đề để thu thập dữ liệu"
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr "Chỉ tạo trung bình RRAs"
-
-msgid "Options"
-msgstr "Tùy chọn"
-
-msgid "Outgoing interface"
-msgstr "Giao diện ra ngoài"
-
-msgid "Output plugins"
-msgstr "Output plugins"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Ping Plugin Configuration"
-msgstr "Cấu hình Ping plugin"
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr "Quá trình xử lý"
-
-msgid "Processes Plugin Configuration"
-msgstr "Cấu hình processes plugin"
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr "Bộ xử lý"
-
-msgid "Qdisc monitoring"
-msgstr "Qdisc monitoring"
-
-msgid "RRD XFiles Factor"
-msgstr "Yếu tố RRD XFiles"
-
-msgid "RRD heart beat interval"
-msgstr "RRD heart beat interval"
-
-msgid "RRD step interval"
-msgstr "RRD step interval"
-
-msgid "RRDTool"
-msgstr "RRDTool"
-
-msgid "RRDTool Plugin Configuration"
-msgstr "Cấu hình RRDTool Plugin "
-
-msgid "Rows per RRA"
-msgstr "Rows per RRA"
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr "Giây"
-
-msgid "Server host"
-msgstr "Server host"
-
-msgid "Server port"
-msgstr "Server port"
-
-msgid "Shaping class monitoring"
-msgstr "Shaping class monitoring"
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr "Nguồn ip range"
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr "Thư mục lưu trữ"
-
-msgid "Storage directory for the csv files"
-msgstr "Thư mục lưu trữ cho nhưng tập tin csv"
-
-msgid "Store data values as rates instead of absolute values"
-msgstr "Những giá trị dữ liệu lưu trữ như một tỉ lệ thay vì giá trị tuyệt đối"
-
-msgid "Stored timespans"
-msgstr "Lưu timspans"
-
-msgid "System Load"
-msgstr "System Load"
-
-msgid "System plugins"
-msgstr "System plugins"
-
-msgid "TCP Connections"
-msgstr "Kết nối TCP"
-
-msgid "TCPConns Plugin Configuration"
-msgstr "Cấu hình TCPConns Plugin "
-
-msgid "TTL for network packets"
-msgstr "TTL cho gói mạng"
-
-msgid "TTL for ping packets"
-msgstr "TTl cho gói ping"
-
-msgid "Table"
-msgstr "Table"
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr "CPU plugin thu thập số liệu thống kê cơ bản về sử dụng bộ việc xử lý"
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-"CSV plugin stores thu thập dữ liệu trong tập tin định dạng csv để tiến hành "
-"xử lý bằng các chương trình bên ngoài."
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-"df plugin thu thập số liệu thông kế về khoảng trống trên đĩa trên những "
-"thiết bị khác,  mount points hoặc những loại filesystem."
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-"Disk plugin thu thập số liệu thống kê chi tiết về cách sử dụng cho những "
-"phân vùng lựa chọn hoặc toàn bộ đĩa."
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-" dns plugin thu thập những thông kê chi tiết về dns liên quan đến lưu thông "
-"trên những giao diện được chọn. "
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-"Email plugin tạo ra một unix socket mà có thể dùng để truyền thông kê e-mail "
-"tới một collectd daemon đang chạy. Cái plugin này chủ yếu được dùng với "
-"Mail::SpamAssasin::Plugin::Collectd nhưng cũng có thể dùng trong những cách  "
-"khác."
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-"Exec plugin bắt đầu những lệnh bên ngoài để đọc những giá trị từ hoặc tới "
-"những quá trình xử lý thông báo bên ngoài khi giá trị của một threshold nhất "
-"định được tiếp cận "
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-"Giao diện plugin thu thập những thống kê lưu thông trên những giao diện được "
-"chọn"
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-"iptables plugin sẽ monitor những cái firewall rules được chọn và thu thập "
-"thông tin về bytes xử lý và gói trên rule. "
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-"irq plugin sẽ monitor tỉ lệ vấn đề trên giây cho những interrupt được chọn. "
-"Nếu không có interrupt được chọn thi tất cả các interrupt sẽ được monitor. "
-"for each selected interrupt. If no interrupt is selected then all interrupts "
-"are monitored."
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr "Plugin tải thu thập thông kê về tổng quát system load"
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-"Netlink plugin thu thập những thông tin mở rộng như qdisc-, class- and "
-"filter-statistics cho những giao diện được chọn"
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-"Network plugin cung cấp network dựa trên giao tiếp giữa những collectd "
-"instances khác nhau. Collectd có thể vận hành trên cả 2 chế độ client và "
-"server. Trong kiểu chế độ client tập hợp ngày tháng địa phương được chuyển "
-"tới một collectd server instance, trong chế độ server, instance địa phương "
-"nhận dữ liệu từ những host khác."
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-"ping plugin sẽ gửi icmp echo trả lời tới những host được chọn và đo thời "
-"gian vận hành qua lại cho từng host"
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-"Processes plugin thu thập thông tin như cpu time, page faults và memory "
-"usage của từng processes được chọn. "
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-"The rrdtool plugin lưu những dữ liệu thu thập trong rrd database files, cơ "
-"sở của biểu đồ.<br /><br /><strong> Cảnh báo: Đặt sai giá trị sẽ tiêu hao bộ "
-"nhớ rất nhiều trong một thư mục tạm thời. Điều này có thể làm thiết bị không "
-"sử dụng được</strong>"
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-"Gói thống kê dựa trên <a href=\"http://collectd.org/index.shtml\">Collectd</"
-"a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD Tool</a> vẽ lại "
-"sơ đồ hình ảnh từ dữ liệu thu thập ."
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-"Tcpconns plugin thu thập thông tin về open tcp kết nối trên những cổng được "
-"chọn."
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-"Unixsock plugin tạo một unix socket mà có thể dùng để đọc dữ liệu thu thập "
-"từ một collectd instance đang vận hành. "
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-"Section này định nghĩa trên giao diện collectd sẽ đợi những kết nối đang tới"
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr "Section này định nghĩa servers thu thập dữ liệu địa phương để gửi đi"
-
-msgid "Try to lookup fully qualified hostname"
-msgstr "Thử tra cứu những tên host đủ điều kiện"
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr "UnixSock"
-
-msgid "Unixsock Plugin Configuration"
-msgstr "Cấu hình Unixsock Plugin "
-
-msgid "Used PID file"
-msgstr "Tập tin PID đã sử dụng"
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr "Verbose monitoring"
-
-msgid "Wireless"
-msgstr "Mạng không dây"
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr "e.g. br-ff"
-
-msgid "e.g. br-lan"
-msgstr "e.g. br-lan"
-
-msgid "e.g. reject-with tcp-reset"
-msgstr "e.g. reject-with tcp-reset"
-
-msgid "max. 16 chars"
-msgstr "max. 16 chars"
-
-msgid "reduces rrd size"
-msgstr "Giảm rrd size"
-
-msgid "seconds; multiple separated by space"
-msgstr "giây; nhiều phân tách bởi khoảng trống"
-
-msgid "server interfaces"
-msgstr "giao diện server"
-
-#~ msgid ""
-#~ "The wireless plugin collects statistics about wireless signal strength, "
-#~ "noise and quality."
-#~ msgstr ""
-#~ "Cấu hình wireless plugin thu thập thống kê về độ mạnh của tín hiệu wireless, "
-#~ "noise và chất lượng."
-
-#~ msgid "Wireless Plugin Configuration"
-#~ msgstr "Cấu hình Wireless Plugin "
diff --git a/po/vi/tinyproxy.po b/po/vi/tinyproxy.po
deleted file mode 100644
index 6c825f5..0000000
--- a/po/vi/tinyproxy.po
+++ /dev/null
@@ -1,332 +0,0 @@
-#  tinyproxy.pot
-#  generated from ./applications/luci-tinyproxy/luasrc/i18n/tinyproxy.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:58+0200\n"
-"PO-Revision-Date: 2009-08-13 03:36+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr "Log level"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr "Tối đa spare servers"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr "Tối thiểu spare servers"
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr "Từ chối truy cập "
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr "Host mục tiêu"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy là một proxy nhỏ và nhanh không-cạc HTTP(S)"
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr "Via proxy"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
-
-#~ msgid "Allow access from"
-#~ msgstr "Cho phép truy cập từ"
-
-#~ msgid "Allowed headers for anonymous proxy"
-#~ msgstr "Cho phép headers cho anonymous proxy"
-
-#~ msgid "Bind outgoing traffic to address"
-#~ msgstr "Blind lưu lượng truy cập ngoài vào địa chỉ"
-
-#~ msgid "Ports allowed for CONNECT method"
-#~ msgstr "Cổng cho phép phương pháp CONNECT"
-
-#~ msgid "0 = disabled, empty = all"
-#~ msgstr "0=vô hiệu hóa, rỗng = tất cả"
-
-#~ msgid "Error document"
-#~ msgstr "Tài liệu lỗi"
-
-#~ msgid "Filter list"
-#~ msgstr "Lọc list"
-
-#~ msgid "Case sensitive filters"
-#~ msgstr "Lọc phím nhạy cảm"
-
-#~ msgid "Filter list is a whitelist"
-#~ msgstr "Lọc list là một whitelist"
-
-#~ msgid "Extended regular expression filters"
-#~ msgstr "Mở rộng các bộ lọc thường xuyên biểu"
-
-#~ msgid "Filter URLs instead of domains"
-#~ msgstr "Lọc URLs thay domain"
-
-#~ msgid "Listen on address"
-#~ msgstr "Nghe trên địa chỉ"
-
-#~ msgid "Logfile"
-#~ msgstr "Logfile"
-
-#~ msgid "Maximum number of clients"
-#~ msgstr "Tối đa số lượng khách hàng"
-
-#~ msgid "Maximum requests per thread"
-#~ msgstr "Tối đa yêu cầu trên thread"
-
-#~ msgid "Spare servers to start with"
-#~ msgstr "Spare servers bắt đầu với"
-
-#~ msgid "Statistic document"
-#~ msgstr "Tài liệu thống kê"
-
-#~ msgid "Write to syslog"
-#~ msgstr "viết tới syslog"
-
-#~ msgid "Connection Timeout"
-#~ msgstr "Kết nối hết hiệu lực"
-
-#~ msgid "Value of Via-Header"
-#~ msgstr "Giá trị của Via-Header"
-
-#~ msgid "Include client IP"
-#~ msgstr "Bao gồm IP của khách hàng"
-
-#~ msgid "Upstream Control"
-#~ msgstr "Điều khiển Upstream "
-
-#~ msgid "Type"
-#~ msgstr "Loại "
-
-#~ msgid "Upstream Proxy"
-#~ msgstr "Upstream Proxy"
diff --git a/po/vi/transmission.po b/po/vi/transmission.po
deleted file mode 100644
index 3125fc2..0000000
--- a/po/vi/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/vi/upnp.po b/po/vi/upnp.po
deleted file mode 100644
index f13b14b..0000000
--- a/po/vi/upnp.po
+++ /dev/null
@@ -1,160 +0,0 @@
-#  upnp.pot
-#  generated from ./applications/luci-upnp/luasrc/i18n/upnp.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:59+0200\n"
-"PO-Revision-Date: 2009-08-13 04:00+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr "Downlink"
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr "Kích hoạt chế độ an toàn"
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-"UPNP cho phép đối tượng trong mạng địa phương tự động định dạng bộ định tuyến"
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr "Universal Plug & Play"
-
-msgid "Uplink"
-msgstr "Uplink"
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-#~ msgid "Log output"
-#~ msgstr "Log output"
-
-#~ msgid ""
-#~ "UPNP should only be enabled if absolutely necessary as it can result in "
-#~ "high security risks for your network."
-#~ msgstr ""
-#~ "Chỉ nên kích hoạt UPNP khi thật cần thiết vì nó có thể gây nguy hiểm cho "
-#~ "mạng lưới"
diff --git a/po/vi/ushare.po b/po/vi/ushare.po
deleted file mode 100644
index 20e5df7..0000000
--- a/po/vi/ushare.po
+++ /dev/null
@@ -1,50 +0,0 @@
-#  ushare.pot
-#  generated from ./applications/luci-ushare/luasrc/i18n/ushare.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-08-16 06:59+0200\n"
-"PO-Revision-Date: 2009-08-13 04:01+0200\n"
-"Last-Translator: Hong Phuc Dang <dhppat@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Pootle 1.1.0\n"
-
-msgid "Content directories"
-msgstr "Danh bạ nội dung "
-
-msgid "Disable telnet console"
-msgstr "Vô hiệu hóa khiển telnet"
-
-msgid "Disable webinterface"
-msgstr "Vô hiệu hóa giao diện web"
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr "Lựa chọn "
-
-msgid "Servername"
-msgstr "tên máy chủ"
-
-msgid "Settings"
-msgstr "Cài đặt"
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/vi/uvc_streamer.po b/po/vi/uvc_streamer.po
deleted file mode 100644
index c38d323..0000000
--- a/po/vi/uvc_streamer.po
+++ /dev/null
@@ -1,38 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/vi/vnstat.po b/po/vi/vnstat.po
deleted file mode 100644
index 9e837ad..0000000
--- a/po/vi/vnstat.po
+++ /dev/null
@@ -1,59 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2010-11-16 20:55+0100\n"
-"Last-Translator:  <xm@subsignal.org>\n"
-"Language-Team: German\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/vi/voice_core.po b/po/vi/voice_core.po
deleted file mode 100644
index 3e45434..0000000
--- a/po/vi/voice_core.po
+++ /dev/null
@@ -1,15 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/vi/voice_diag.po b/po/vi/voice_diag.po
deleted file mode 100644
index 715f411..0000000
--- a/po/vi/voice_diag.po
+++ /dev/null
@@ -1,22 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/vi/watchcat.po b/po/vi/watchcat.po
deleted file mode 100644
index e62a995..0000000
--- a/po/vi/watchcat.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/vi/wol.po b/po/vi/wol.po
deleted file mode 100644
index 186ce55..0000000
--- a/po/vi/wol.po
+++ /dev/null
@@ -1,49 +0,0 @@
-# Generated from applications/luci-wol/luasrc/model/cbi/wol.lua
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2010-04-19 00:29+0200\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/vi/wshaper.po b/po/vi/wshaper.po
deleted file mode 100644
index 4eee2b6..0000000
--- a/po/vi/wshaper.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/zh_CN/ahcp.po b/po/zh_CN/ahcp.po
deleted file mode 100644
index 68c8ce9..0000000
--- a/po/zh_CN/ahcp.po
+++ /dev/null
@@ -1,109 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-04-03 08:56+0200\n"
-"Last-Translator: lyricz <flyhigher@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "AHCP Server"
-msgstr ""
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Lease directory"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr "端口"
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Served interfaces"
-msgstr ""
-
-msgid "Server"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "Unique ID file"
-msgstr ""
diff --git a/po/zh_CN/asterisk.po b/po/zh_CN/asterisk.po
deleted file mode 100644
index 9ef2f1f..0000000
--- a/po/zh_CN/asterisk.po
+++ /dev/null
@@ -1,171 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-04-02 19:34+0200\n"
-"Last-Translator: Anonymous Pootle User\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-#~ msgid "Asterisk General Options"
-#~ msgstr "Asterisk 基本选项"
-
-# test
-#~ msgid "AGI directory"
-#~ msgstr "AGI 目录"
-
-#~ msgid "Cache recorded sound files during recording"
-#~ msgstr "录音时缓存录音文件"
-
-#~ msgid "Debug Level"
-#~ msgstr "调试级别"
-
-#~ msgid "Disable some warnings"
-#~ msgstr "屏蔽部分警告"
-
-#~ msgid "Dump core on crash"
-#~ msgstr "系统崩溃时记录错误信息"
-
-#~ msgid "High Priority"
-#~ msgstr "高优先级"
-
-#~ msgid "Initialise Crypto"
-#~ msgstr "初始化加密"
-
-#~ msgid "Use Internal Timing"
-#~ msgstr "使用内部计时器"
-
-#~ msgid "Log directory"
-#~ msgstr "日志目录"
-
-#~ msgid "Maximum number of calls allowed"
-#~ msgstr "最大允许呼叫数"
-
-#~ msgid "Maximum load to stop accepting new calls"
-#~ msgstr "允许接受新呼叫的最大负载"
-
-#~ msgid "Disable console colors"
-#~ msgstr "禁用控制台色彩"
-
-#~ msgid "Sound files Cache directory"
-#~ msgstr "音效文件缓存目录"
-
-#~ msgid "The Group to run as"
-#~ msgstr "以此“组”权限运行"
-
-#~ msgid "The User to run as"
-#~ msgstr "以此“用户”身份运行"
-
-#~ msgid "Voicemail Spool directory"
-#~ msgstr "语音邮件缓存目录"
-
-#~ msgid "Prefix UniquID with system name"
-#~ msgstr "UniquID前加系统名做前缀"
-
-#~ msgid "Build transcode paths via SLINEAR, not directly"
-#~ msgstr "由SLINEAR间接建立转码路径"
-
-#~ msgid "Transmit SLINEAR silence while recording a channel"
-#~ msgstr "对频道录音时传送SLINEAR静默"
-
-#~ msgid "Verbose Level"
-#~ msgstr "详细级别"
-
-#~ msgid "Time Zone"
-#~ msgstr "时区"
-
-#~ msgid "Section dialplan"
-#~ msgstr "段内拨号计划"
-
-#~ msgid "include"
-#~ msgstr "包含"
-
-#~ msgid "Dialplan Extension"
-#~ msgstr "拨号计划 扩展"
-
-#~ msgid "Dialplan General Options"
-#~ msgstr "拨号计划 基本参数"
-
-#~ msgid "Allow transfer"
-#~ msgstr "允许 呼叫转移"
-
-#~ msgid "Clear global vars"
-#~ msgstr "清除全局变量"
-
-#~ msgid "Dialplan Goto"
-#~ msgstr "拨号计划至"
-
-#~ msgid "Dialplan Conference"
-#~ msgstr "会议拨号计划"
-
-#~ msgid "Dialplan Time"
-#~ msgstr "时间拨号计划"
-
-#~ msgid "Dialplan Voicemail"
-#~ msgstr "语音信箱拨号计划"
-
-#~ msgid "Dial Zones for Dialplan"
-#~ msgstr "适用拨号计划的拨号区域"
-
-#~ msgid "Prefix to add matching dialplans"
-#~ msgstr "用于匹配拨号计划的前缀"
-
-#~ msgid "Match International prefix"
-#~ msgstr "匹配的国际前缀"
-
-#~ msgid "localzone"
-#~ msgstr "本地区域"
-
-#~ msgid "Match plan"
-#~ msgstr "匹配计划"
-
-#~ msgid "Connection to use"
-#~ msgstr "使用连接"
-
-#~ msgid "Feature Key maps"
-#~ msgstr "特殊键映射"
-
-#~ msgid "Attended transfer key"
-#~ msgstr "加入传输键"
-
-#~ msgid "Blind transfer key"
-#~ msgstr "屏蔽传输键"
-
-#~ msgid "Key to Disconnect call"
-#~ msgstr "结束呼叫键"
-
-#~ msgid "Key to Park call"
-#~ msgstr "呼叫驻留键"
-
-#~ msgid "Parking Feature"
-#~ msgstr "驻留特性"
-
-#~ msgid "ADSI Park"
-#~ msgstr "ADSI驻留"
-
-#~ msgid "Attended transfer timeout (sec)"
-#~ msgstr "加入传输超时（秒）"
-
-#~ msgid "One touch record key"
-#~ msgstr "一键录制"
-
-#~ msgid "Email"
-#~ msgstr "Email"
-
-#~ msgid "Display Name"
-#~ msgstr "显示名字"
-
-#~ msgid "Password"
-#~ msgstr "密码"
-
-#~ msgid "zone"
-#~ msgstr "区"
-
-#~ msgid "Message Format"
-#~ msgstr "消息格式"
diff --git a/po/zh_CN/base.po b/po/zh_CN/base.po
deleted file mode 100644
index f0c59df..0000000
--- a/po/zh_CN/base.po
+++ /dev/null
@@ -1,3715 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-12-21 23:08+0200\n"
-"PO-Revision-Date: 2013-02-27 08:13+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: QQ Group:75543259\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr "(%d分钟信息，%d秒刷新)"
-
-msgid "(%s available)"
-msgstr "(%s 可用)"
-
-msgid "(empty)"
-msgstr "(空)"
-
-msgid "(no interfaces attached)"
-msgstr "(未连接接口)"
-
-msgid "-- Additional Field --"
-msgstr "-- 更多选项 --"
-
-msgid "-- Please choose --"
-msgstr "-- 请选择 --"
-
-msgid "-- custom --"
-msgstr "-- 自定义 --"
-
-msgid "1 Minute Load:"
-msgstr "1分钟负载:"
-
-msgid "15 Minute Load:"
-msgstr "15分钟负载:"
-
-msgid "40MHz 2nd channel above"
-msgstr "40MHz HT40+ (仅1-7频道可用）"
-
-msgid "40MHz 2nd channel below"
-msgstr "40MHz HT40- (仅5-13频道可用）"
-
-msgid "5 Minute Load:"
-msgstr "5分钟负载:"
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 查询端口"
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr "<abbr title=\"Domain Name System\">DNS</abbr> 服务器端口"
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr "将会按照指定的顺序查询<abbr title=\"Domain Name System\">DNS</abbr>"
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-地址"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-网关"
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-子网掩码"
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址或超网() (<abbr "
-"title=\"无类别域间路由\">CIDR</abbr>)"
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-网关"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr>配置"
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr "<abbr title=\"Light Emitting Diode\">LED</abbr>名称"
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-地址"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-"最大<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>分配数量"
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr "最大<abbr title=\"DNS扩展名\">EDNS0</abbr>数据包大小"
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr "<abbr title=\"maximal\">最大</abbr>并发查询数"
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-
-msgid "APN"
-msgstr "APN"
-
-msgid "AR Support"
-msgstr "AR支持"
-
-msgid "ARP retry threshold"
-msgstr "ARP重试阈值"
-
-msgid "ATM Bridges"
-msgstr "ATM桥接"
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr "ATM虚拟通道标识(VCI)"
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr "ATM虚拟路径标识(VPI)"
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-"ATM桥是以AAL5协议封装以太网的虚拟Linux网桥，用于协同DHCP或PPP来拨号连接到网络"
-"运营商。"
-
-msgid "ATM device number"
-msgstr "ATM设备号码"
-
-msgid "Accept router advertisements"
-msgstr "接收路由通告"
-
-msgid "Access Concentrator"
-msgstr "接入集中器"
-
-msgid "Access Point"
-msgstr "接入点AP"
-
-msgid "Action"
-msgstr "动作"
-
-msgid "Actions"
-msgstr "动作"
-
-msgid "Activate this network"
-msgstr "激活此网络"
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr "活动的<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-链路"
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr "活动的<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-链路"
-
-msgid "Active Connections"
-msgstr "活动连接"
-
-msgid "Active DHCP Leases"
-msgstr "已分配的DHCP租约"
-
-msgid "Active DHCPv6 Leases"
-msgstr "已分配的DHCPv6租约"
-
-msgid "Ad-Hoc"
-msgstr "点对点Ad-Hoc"
-
-msgid "Add"
-msgstr "添加"
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr "添加本地域名后缀到HOSTS文件中的域名"
-
-msgid "Add new interface..."
-msgstr "添加新接口..."
-
-msgid "Additional Hosts files"
-msgstr "额外的HOSTS文件"
-
-msgid "Address"
-msgstr "地址"
-
-msgid "Address to access local relay bridge"
-msgstr "接入本地中继桥的地址"
-
-msgid "Administration"
-msgstr "管理权"
-
-msgid "Advanced Settings"
-msgstr "高级设置"
-
-msgid "Advertise IPv6 on network"
-msgstr "在网络上通告IPv6"
-
-msgid "Advertised network ID"
-msgstr "通告的网络ID"
-
-msgid "Alert"
-msgstr "警戒"
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr "允许<abbr title=\"Secure Shell\">SSH</abbr>密码验证"
-
-msgid "Allow all except listed"
-msgstr "仅允许列表外"
-
-msgid "Allow listed only"
-msgstr "仅允许列表内"
-
-msgid "Allow localhost"
-msgstr "允许本机"
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr "允许远程主机连接到本地SSH转发端口"
-
-msgid "Allow root logins with password"
-msgstr "root权限登录"
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr "允许<em>root</em>用户凭密码登录"
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr "允许127.0.0.0/8回环范围内的上行响应，例如：RBL服务"
-
-msgid "Allowed range is 1 to 65535"
-msgstr "允许的范围：1 到 65535"
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr "强制启用40MHz频宽并忽略辅助信道重叠。此选项不兼容IEEE 802.11n-2009!"
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr "取消选中将会另外创建一个新网络，而不会覆盖当前网络设置"
-
-msgid "Antenna 1"
-msgstr "天线 1"
-
-msgid "Antenna 2"
-msgstr "天线 2"
-
-msgid "Antenna Configuration"
-msgstr "天线配置"
-
-msgid "Any zone"
-msgstr "任意区域"
-
-msgid "Apply"
-msgstr "应用"
-
-msgid "Applying changes"
-msgstr "正在应用更改"
-
-msgid "Assign interfaces..."
-msgstr "分配接口..."
-
-msgid "Associated Stations"
-msgstr "已连接站点"
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr "Qualcomm/Atheros 802.11%s 无线网卡"
-
-msgid "Authentication"
-msgstr "认证"
-
-msgid "Authoritative"
-msgstr "授权的唯一DHCP服务器"
-
-msgid "Authorization Required"
-msgstr "需要授权"
-
-msgid "Auto Refresh"
-msgstr "自动刷新"
-
-msgid "Available"
-msgstr "可用"
-
-msgid "Available packages"
-msgstr "可用软件包"
-
-msgid "Average:"
-msgstr "平均:"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Back"
-msgstr "返回"
-
-msgid "Back to Overview"
-msgstr "返回至概况"
-
-msgid "Back to configuration"
-msgstr "返回至配置"
-
-msgid "Back to overview"
-msgstr "返回至概况"
-
-msgid "Back to scan results"
-msgstr "返回至扫描结果"
-
-msgid "Background Scan"
-msgstr "后台搜索"
-
-msgid "Backup / Flash Firmware"
-msgstr "备份/升级"
-
-msgid "Backup / Restore"
-msgstr "备份/恢复"
-
-msgid "Backup file list"
-msgstr "文件备份列表"
-
-msgid "Bad address specified!"
-msgstr "指定了错误的地址！"
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-"下面是待备份的文件清单。包含了更改的配置文件、必要的基础文件和用户自定义的需"
-"备份文件。"
-
-msgid "Bitrate"
-msgstr "传输速率"
-
-msgid "Bogus NX Domain Override"
-msgstr "忽略虚假空域名解析"
-
-msgid "Bridge"
-msgstr "桥接"
-
-msgid "Bridge interfaces"
-msgstr "桥接接口"
-
-msgid "Bridge unit number"
-msgstr "桥接号"
-
-msgid "Bring up on boot"
-msgstr "开机自动运行"
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr "Broadcom 802.11%s 无线网卡"
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr "Broadcom BCM%04x 802.11 无线网卡"
-
-msgid "Buffered"
-msgstr "已缓冲"
-
-msgid "Buttons"
-msgstr "按键"
-
-msgid "CPU"
-msgstr "CPU"
-
-msgid "CPU usage (%)"
-msgstr "CPU使用率(%)"
-
-msgid "Cached"
-msgstr "已缓存"
-
-msgid "Cancel"
-msgstr "取消"
-
-msgid "Chain"
-msgstr "链"
-
-msgid "Changes"
-msgstr "修改数"
-
-msgid "Changes applied."
-msgstr "更改已应用"
-
-msgid "Changes the administrator password for accessing the device"
-msgstr "修改访问设备的管理员密码"
-
-msgid "Channel"
-msgstr "信道"
-
-msgid "Check"
-msgstr "检查"
-
-msgid "Checksum"
-msgstr "校验值"
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr "此接口的防火墙区域。填写<em>创建</em>栏可新建防火墙区域。"
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr "选择指派到此无线接口的网络。填写<em>创建</em>栏可新建网络。"
-
-msgid "Cipher"
-msgstr "算法"
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr "备份/恢复当前系统配置文件或重置OpenWrt(仅squashfs固件有效)。"
-
-msgid "Client"
-msgstr "客户端Client"
-
-msgid "Client ID to send when requesting DHCP"
-msgstr "请求DHCP时发送的客户ID"
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr "定时关闭非活动链接(秒)，0为持续连接"
-
-msgid "Close list..."
-msgstr "关闭列表..."
-
-msgid "Collecting data..."
-msgstr "正在收集数据..."
-
-msgid "Command"
-msgstr "进程命令"
-
-msgid "Common Configuration"
-msgstr "一般设置"
-
-msgid "Compression"
-msgstr "压缩"
-
-msgid "Configuration"
-msgstr "配置"
-
-msgid "Configuration applied."
-msgstr "配置已应用"
-
-msgid "Configuration files will be kept."
-msgstr "配置文件将被保留。"
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "设置挂载为extroot"
-
-msgid "Confirmation"
-msgstr "确认密码"
-
-msgid "Connect"
-msgstr "连接"
-
-msgid "Connected"
-msgstr "已连接"
-
-msgid "Connection Limit"
-msgstr "连接数限制"
-
-msgid "Connections"
-msgstr "链接"
-
-msgid "Country"
-msgstr "国家"
-
-msgid "Country Code"
-msgstr "国家代码"
-
-msgid "Cover the following interface"
-msgstr "包括以下接口"
-
-msgid "Cover the following interfaces"
-msgstr "包括以下接口"
-
-msgid "Create / Assign firewall-zone"
-msgstr "创建/分配 防火墙区域"
-
-msgid "Create Interface"
-msgstr "创建新接口"
-
-msgid "Create a bridge over multiple interfaces"
-msgstr "在多个接口上创建桥接"
-
-msgid "Critical"
-msgstr "致命错误"
-
-msgid "Cron Log Level"
-msgstr "Cron日志级别"
-
-msgid "Custom Interface"
-msgstr "自定义接口"
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr "自定义<abbr title=\"Light Emitting Diode\">LED</abbr>的活动状态。"
-
-msgid "DHCP Leases"
-msgstr "DHCP分配"
-
-msgid "DHCP Server"
-msgstr "DHCP服务器"
-
-msgid "DHCP and DNS"
-msgstr "DHCP/DNS"
-
-msgid "DHCP client"
-msgstr "DHCP客户端"
-
-msgid "DHCP-Options"
-msgstr "DHCP-选项"
-
-msgid "DHCPv6 Leases"
-msgstr "DHCPv6分配"
-
-msgid "DNS"
-msgstr "DNS"
-
-msgid "DNS forwardings"
-msgstr "DNS转发"
-
-msgid "DUID"
-msgstr "DUID（DHCP唯一标识符）"
-
-msgid "Debug"
-msgstr "调试"
-
-msgid "Default %d"
-msgstr "默认%d"
-
-msgid "Default gateway"
-msgstr "默认网关"
-
-msgid "Default state"
-msgstr "默认状态"
-
-msgid "Define a name for this network."
-msgstr "为网络定义名称"
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-"设置DHCP的附加选项，例如设定\"<code>6,192.168.2.1,192.168.2.2</code>\"表示通"
-"告不同的DNS服务器给客户端。"
-
-msgid "Delete"
-msgstr "删除"
-
-msgid "Delete this interface"
-msgstr "删除此接口"
-
-msgid "Delete this network"
-msgstr "删除此网络"
-
-msgid "Description"
-msgstr "描述"
-
-msgid "Design"
-msgstr "主题"
-
-msgid "Destination"
-msgstr "目标地址"
-
-msgid "Device"
-msgstr "设备"
-
-msgid "Device Configuration"
-msgstr "设备配置"
-
-msgid "Diagnostics"
-msgstr "网络诊断"
-
-msgid "Directory"
-msgstr "目录"
-
-msgid "Disable"
-msgstr "禁用"
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-"禁用本接口的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>。"
-
-msgid "Disable DNS setup"
-msgstr "停用DNS设定"
-
-msgid "Disable HW-Beacon timer"
-msgstr "停用 HW-Beacon 计时器"
-
-msgid "Disabled"
-msgstr "禁用"
-
-msgid "Discard upstream RFC1918 responses"
-msgstr "丢弃RFC1918上行响应数据"
-
-msgid "Displaying only packages containing"
-msgstr "只显示有内容的软件包"
-
-msgid "Distance Optimization"
-msgstr "距离优化"
-
-msgid "Distance to farthest network member in meters."
-msgstr "最远客户端的距离(米)。"
-
-msgid "Diversity"
-msgstr "分集"
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr "Dnsmasq为NAT防火墙提供了一个集成的DHCP服务器和DNS转发器"
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr "不缓存无用的回应, 比如：不存在的域。"
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr "不转发公共域名服务器无法回应的请求"
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr "不转发反向查询本地网络的Lookups命令"
-
-msgid "Do not send probe responses"
-msgstr "不回送探测响应"
-
-msgid "Domain required"
-msgstr "忽略空域名解析"
-
-msgid "Domain whitelist"
-msgstr "域名白名单"
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr "不转发没有DNS名称的解析请求"
-
-msgid "Download and install package"
-msgstr "下载并安装软件包"
-
-msgid "Download backup"
-msgstr "下载备份"
-
-msgid "Dropbear Instance"
-msgstr "Dropbear设置"
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-"Dropbear提供了集成的<abbr title=\"Secure Copy\">SCP</abbr>服务器和基于<abbr "
-"title=\"Secure Shell\">SSH</abbr>的shell访问"
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr "动态<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-
-msgid "Dynamic tunnel"
-msgstr "动态隧道"
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr "动态分配DHCP地址。如果禁用，则只能为静态租用表中的客户端提供网络服务。"
-
-msgid "EAP-Method"
-msgstr "EAP-Method"
-
-msgid "Edit"
-msgstr "修改"
-
-msgid "Edit this interface"
-msgstr "修改此接口"
-
-msgid "Edit this network"
-msgstr "修改此网络"
-
-msgid "Emergency"
-msgstr "紧急"
-
-msgid "Enable"
-msgstr "启用"
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr "开启<abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr "启用HE.net动态终端更新"
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr "在PPP链路上启用IPv6协商"
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr "启用巨型帧透传"
-
-msgid "Enable NTP client"
-msgstr "启用NTP客户端"
-
-msgid "Enable TFTP server"
-msgstr "启用TFTP服务器"
-
-msgid "Enable VLAN functionality"
-msgstr "启用VLAN"
-
-msgid "Enable learning and aging"
-msgstr "启用智能交换学习"
-
-msgid "Enable this mount"
-msgstr "启用挂载项"
-
-msgid "Enable this swap"
-msgstr "启用swap"
-
-msgid "Enable/Disable"
-msgstr "启用/禁用"
-
-msgid "Enabled"
-msgstr "启用"
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr "在此桥接上启用生成协议树"
-
-msgid "Encapsulation mode"
-msgstr "封装模式"
-
-msgid "Encryption"
-msgstr "加密"
-
-msgid "Erasing..."
-msgstr "擦除中..."
-
-msgid "Error"
-msgstr "错误"
-
-msgid "Ethernet Adapter"
-msgstr "以太网适配器"
-
-msgid "Ethernet Switch"
-msgstr "以太网交换机"
-
-msgid "Expand hosts"
-msgstr "扩展HOSTS文件中的主机后缀"
-
-msgid "Expires"
-msgstr "到期时间"
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr "地址租期，最小2分钟(<code>2m</code>)。"
-
-msgid "External system log server"
-msgstr "远程log服务器"
-
-msgid "External system log server port"
-msgstr "远程log服务器端口"
-
-msgid "Fast Frames"
-msgstr "快速帧"
-
-msgid "File"
-msgstr "文件"
-
-msgid "Filename of the boot image advertised to clients"
-msgstr "向客户端通告的启动镜像文件名"
-
-msgid "Filesystem"
-msgstr "文件系统"
-
-msgid "Filter"
-msgstr "过滤器"
-
-msgid "Filter private"
-msgstr "过滤本地包"
-
-msgid "Filter useless"
-msgstr "过滤无用包"
-
-msgid "Find and join network"
-msgstr "搜索并加入网络"
-
-msgid "Find package"
-msgstr "查找软件包"
-
-msgid "Finish"
-msgstr "完成"
-
-msgid "Firewall"
-msgstr "防火墙"
-
-msgid "Firewall Settings"
-msgstr "防火墙设置"
-
-msgid "Firewall Status"
-msgstr "防火墙状态"
-
-msgid "Firmware Version"
-msgstr "固件版本"
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr "指定的DNS查询源端口"
-
-msgid "Flags"
-msgstr "标识"
-
-msgid "Flash Firmware"
-msgstr "刷新固件"
-
-msgid "Flash image..."
-msgstr "刷写固件..."
-
-msgid "Flash new firmware image"
-msgstr "刷写新的固件"
-
-msgid "Flash operations"
-msgstr "刷新操作"
-
-msgid "Flashing..."
-msgstr "刷写中..."
-
-msgid "Force"
-msgstr "强制开启DHCP"
-
-msgid "Force 40MHz mode"
-msgstr "强制40MHz频宽"
-
-msgid "Force CCMP (AES)"
-msgstr "强制使用CCMP(AES)加密"
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr "强制开启DHCP。"
-
-msgid "Force TKIP"
-msgstr "强制使用TKIP加密"
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr "TKIP和CCMP(AES)混合加密"
-
-msgid "Forward DHCP traffic"
-msgstr "转发DHCP数据包"
-
-msgid "Forward broadcast traffic"
-msgstr "转发广播数据包"
-
-msgid "Forwarding mode"
-msgstr "转发模式"
-
-msgid "Fragmentation Threshold"
-msgstr "分片阈值"
-
-msgid "Frame Bursting"
-msgstr "帧突发"
-
-msgid "Free"
-msgstr "空闲数"
-
-msgid "Free space"
-msgstr "空闲空间"
-
-msgid "Frequency Hopping"
-msgstr "跳频"
-
-msgid "GHz"
-msgstr "GHz"
-
-msgid "GPRS only"
-msgstr "仅GPRS"
-
-msgid "Gateway"
-msgstr "网关"
-
-msgid "Gateway ports"
-msgstr "网关端口"
-
-msgid "General Settings"
-msgstr "基本设置"
-
-msgid "General Setup"
-msgstr "基本设置"
-
-msgid "Generate archive"
-msgstr "生成备份"
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr "Generic 802.11%s 无线网卡"
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr "由于密码验证不匹配，密码没有更改！"
-
-msgid "Go to password configuration..."
-msgstr "跳转到密码配置页..."
-
-msgid "Go to relevant configuration page"
-msgstr "跳转到相关的配置页面"
-
-msgid "HE.net password"
-msgstr "HE.net密码"
-
-msgid "HE.net user ID"
-msgstr "HE.net用户ID"
-
-msgid "HT capabilities"
-msgstr "HT功能"
-
-msgid "HT mode"
-msgstr "HT模式"
-
-msgid "Handler"
-msgstr "处理程序"
-
-msgid "Hang Up"
-msgstr "挂起"
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr "配置路由器的部分基础信息。"
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr "SSH公共密钥认证(每行一个密钥)。"
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr "Hermes 802.11b 无线网卡"
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr "隐藏<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-
-msgid "Host entries"
-msgstr "主机目录"
-
-msgid "Host expiry timeout"
-msgstr "主机到期超时"
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr "主机IP或网络"
-
-msgid "Hostname"
-msgstr "主机名"
-
-msgid "Hostname to send when requesting DHCP"
-msgstr "请求DHCP时发送的主机名"
-
-msgid "Hostnames"
-msgstr "主机名"
-
-msgid "IP address"
-msgstr "IP地址"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 Firewall"
-msgstr "IPv4防火墙"
-
-msgid "IPv4 WAN Status"
-msgstr "IPv4 WAN状态"
-
-msgid "IPv4 address"
-msgstr "IPv4地址"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4和IPv6"
-
-msgid "IPv4 broadcast"
-msgstr "IPv4广播"
-
-msgid "IPv4 gateway"
-msgstr "IPv4网关"
-
-msgid "IPv4 netmask"
-msgstr "IPv4子网掩码"
-
-msgid "IPv4 only"
-msgstr "仅IPv4"
-
-msgid "IPv4 prefix length"
-msgstr "IPv4地址前缀长度"
-
-msgid "IPv4-Address"
-msgstr "IPv4-地址"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 Firewall"
-msgstr "IPv6防火墙"
-
-msgid "IPv6 WAN Status"
-msgstr "IPv6 WAN状态"
-
-msgid "IPv6 address"
-msgstr "IPv6地址"
-
-msgid "IPv6 gateway"
-msgstr "IPv6网关"
-
-msgid "IPv6 only"
-msgstr "仅IPv6"
-
-msgid "IPv6 prefix"
-msgstr "IPv6地址前缀"
-
-msgid "IPv6 prefix length"
-msgstr "IPv6地址前缀长度"
-
-msgid "IPv6-Address"
-msgstr "IPv6-地址"
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr "IPv6-in-IPv4 (RFC4213)"
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr "IPv6-over-IPv4 (6rd)"
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr "IPv6-over-IPv4 (6to4)"
-
-msgid "Identity"
-msgstr "鉴权"
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr "用UUID来挂载设备"
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr "用卷标来挂载设备"
-
-msgid "If unchecked, no default route is configured"
-msgstr "留空则不配置默认路由"
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr "留空则忽略所通告的DNS服务器地址"
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr "如果物理内存不足，闲置数据可交换到swap设备暂存，以提高可用内存。"
-
-msgid "Ignore Hosts files"
-msgstr "忽略HOSTS文件"
-
-msgid "Ignore interface"
-msgstr "关闭DHCP"
-
-msgid "Ignore resolve file"
-msgstr "忽略解析文件"
-
-msgid "Image"
-msgstr "固件文件"
-
-msgid "In"
-msgstr "入口"
-
-msgid "Inactivity timeout"
-msgstr "活动超时"
-
-msgid "Inbound:"
-msgstr "入站:"
-
-msgid "Info"
-msgstr "信息"
-
-msgid "Initscript"
-msgstr "启动脚本"
-
-msgid "Initscripts"
-msgstr "启动脚本"
-
-msgid "Install"
-msgstr "安装"
-
-msgid "Install package %q"
-msgstr "安装软件包%q"
-
-msgid "Install protocol extensions..."
-msgstr "安装扩展协议..."
-
-msgid "Installed packages"
-msgstr "已安装软件包"
-
-msgid "Interface"
-msgstr "接口"
-
-msgid "Interface Configuration"
-msgstr "接口配置"
-
-msgid "Interface Overview"
-msgstr "接口总览"
-
-msgid "Interface is reconnecting..."
-msgstr "正在重新连接接口..."
-
-msgid "Interface is shutting down..."
-msgstr "正在关闭接口..."
-
-msgid "Interface not present or not connected yet."
-msgstr "接口不存在或未连接"
-
-msgid "Interface reconnected"
-msgstr "接口已重新连接"
-
-msgid "Interface shut down"
-msgstr "接口已关闭"
-
-msgid "Interfaces"
-msgstr "接口"
-
-msgid "Internal Server Error"
-msgstr "内部服务器错误"
-
-msgid "Invalid"
-msgstr "无效"
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr "无效的VLAN ID! 只有 %d 和 %d 之间的ID有效。"
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr "无效的VLAN ID! 只允许唯一的ID。"
-
-msgid "Invalid username and/or password! Please try again."
-msgstr "无效的用户名和/或密码! 请重试。"
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr "将要刷新的固件与本路由器不兼容，请重新验证固件文件。"
-
-msgid "Java Script required!"
-msgstr "需要Java Script！"
-
-msgid "Join Network"
-msgstr "加入网络"
-
-msgid "Join Network: Settings"
-msgstr "加入网络:设置"
-
-msgid "Join Network: Wireless Scan"
-msgstr "加入网络:搜索无线"
-
-msgid "Keep settings"
-msgstr "保留配置"
-
-msgid "Kernel Log"
-msgstr "内核日志"
-
-msgid "Kernel Version"
-msgstr "内核版本"
-
-msgid "Key"
-msgstr "密码"
-
-msgid "Key #%d"
-msgstr "密码 #%d"
-
-msgid "Kill"
-msgstr "强制关闭"
-
-msgid "L2TP"
-msgstr "L2TP"
-
-msgid "L2TP Server"
-msgstr "L2TP服务器"
-
-msgid "LCP echo failure threshold"
-msgstr "LCP响应故障阈值"
-
-msgid "LCP echo interval"
-msgstr "LCP响应间隔"
-
-msgid "LLC"
-msgstr "LLC"
-
-msgid "Label"
-msgstr "卷标"
-
-msgid "Language"
-msgstr "语言"
-
-msgid "Language and Style"
-msgstr "语言和界面"
-
-msgid "Lease validity time"
-msgstr "有效租期"
-
-msgid "Leasefile"
-msgstr "租约文件"
-
-msgid "Leasetime"
-msgstr "租用时间"
-
-msgid "Leasetime remaining"
-msgstr "剩余租期"
-
-msgid "Leave empty to autodetect"
-msgstr "留空则自动探测"
-
-msgid "Leave empty to use the current WAN address"
-msgstr "留空则使用当前WAN地址"
-
-msgid "Legend:"
-msgstr "图例："
-
-msgid "Limit"
-msgstr "客户数"
-
-msgid "Link On"
-msgstr "活动链接"
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr "将指定的域名DNS解析转发到指定的DNS服务器（按照示例填写）"
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr "允许RFC1918响应的域名列表"
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr "允许虚假空域名响应的服务器列表"
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr "监听指定的接口；未指定则监听全部"
-
-msgid "Listening port for inbound DNS queries"
-msgstr "入站DNS查询端口"
-
-msgid "Load"
-msgstr "负载"
-
-msgid "Load Average"
-msgstr "平均负载"
-
-msgid "Loading"
-msgstr "加载中"
-
-msgid "Local IPv4 address"
-msgstr "本地IPv4地址"
-
-msgid "Local IPv6 address"
-msgstr "本地IPv6地址"
-
-msgid "Local Startup"
-msgstr "本地启动脚本"
-
-msgid "Local Time"
-msgstr "本地时间"
-
-msgid "Local domain"
-msgstr "本地域名"
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr "本地域名规则。从不转发和处理只源自DHCP或HOSTS文件的本地域名数据"
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr "本地域名后缀将添加到DHCP和HOSTS文件条目"
-
-msgid "Local server"
-msgstr "本地服务器"
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr "如果有多个IP可用，则根据请求来源的子网来本地化主机名"
-
-msgid "Localise queries"
-msgstr "本地化查询"
-
-msgid "Locked to channel %d used by %s"
-msgstr "信道已锁定为:%d ；源于:%s "
-
-msgid "Log output level"
-msgstr "日志记录等级"
-
-msgid "Log queries"
-msgstr "日志查询"
-
-msgid "Logging"
-msgstr "日志"
-
-msgid "Login"
-msgstr "登录"
-
-msgid "Logout"
-msgstr "退出"
-
-msgid "Lowest leased address as offset from the network address."
-msgstr "网络地址的起始分配基址。"
-
-msgid "MAC-Address"
-msgstr "MAC-地址"
-
-msgid "MAC-Address Filter"
-msgstr "MAC-地址过滤"
-
-msgid "MAC-Filter"
-msgstr "MAC-过滤"
-
-msgid "MAC-List"
-msgstr "MAC-列表"
-
-msgid "MB/s"
-msgstr "MB/s"
-
-msgid "MHz"
-msgstr "MHz"
-
-msgid "MTU"
-msgstr "MTU"
-
-msgid "Maximum Rate"
-msgstr "最高速率"
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr "允许的最大DHCP租用数"
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr "允许的最大并发DNS查询数"
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr "允许的最大EDNS.0 UDP报文大小"
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr "调制解调器就绪的最大等待时间(秒)"
-
-msgid "Maximum hold time"
-msgstr "最大持续时间"
-
-msgid "Maximum number of leased addresses."
-msgstr "最大地址分配数量。"
-
-msgid "Mbit/s"
-msgstr "Mbit/s"
-
-msgid "Memory"
-msgstr "内存"
-
-msgid "Memory usage (%)"
-msgstr "内存使用率(%)"
-
-msgid "Metric"
-msgstr "跃点数"
-
-msgid "Minimum Rate"
-msgstr "最低速率"
-
-msgid "Minimum hold time"
-msgstr "最低持续时间"
-
-msgid "Missing protocol extension for proto %q"
-msgstr "缺少协议%q的协议扩展"
-
-msgid "Mode"
-msgstr "模式"
-
-msgid "Modem device"
-msgstr "调制解调器节点"
-
-msgid "Modem init timeout"
-msgstr "调制解调器初始化超时"
-
-msgid "Monitor"
-msgstr "监听Monitor"
-
-msgid "Mount Entry"
-msgstr "挂载项"
-
-msgid "Mount Point"
-msgstr "挂载点"
-
-msgid "Mount Points"
-msgstr "挂载点"
-
-msgid "Mount Points - Mount Entry"
-msgstr "挂载点-Mount"
-
-msgid "Mount Points - Swap Entry"
-msgstr "挂载点-Swap"
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr "配置存储设备挂载到文件系统中的位置和参数。"
-
-msgid "Mount options"
-msgstr "挂载选项"
-
-msgid "Mount point"
-msgstr "挂载点"
-
-msgid "Mounted file systems"
-msgstr "已挂载的文件系统"
-
-msgid "Move down"
-msgstr "下移"
-
-msgid "Move up"
-msgstr "上移"
-
-msgid "Multicast Rate"
-msgstr "多播速率"
-
-msgid "Multicast address"
-msgstr "多播地址"
-
-msgid "NAS ID"
-msgstr "NAS ID"
-
-msgid "NTP server candidates"
-msgstr "候选NTP服务器"
-
-msgid "Name"
-msgstr "名称"
-
-msgid "Name of the new interface"
-msgstr "新接口的名称"
-
-msgid "Name of the new network"
-msgstr "新网络的名称"
-
-msgid "Navigation"
-msgstr "导航"
-
-msgid "Netmask"
-msgstr "子网掩码"
-
-msgid "Network"
-msgstr "网络"
-
-msgid "Network Utilities"
-msgstr "网络工具"
-
-msgid "Network boot image"
-msgstr "网络启动镜像"
-
-msgid "Network without interfaces."
-msgstr "无接口的网络。"
-
-msgid "Next »"
-msgstr "下一步 »"
-
-msgid "No DHCP Server configured for this interface"
-msgstr "本接口未配置DHCP服务器"
-
-msgid "No chains in this table"
-msgstr "本表中没有链"
-
-msgid "No files found"
-msgstr "未找到文件"
-
-msgid "No information available"
-msgstr "无可用信息"
-
-msgid "No negative cache"
-msgstr "禁用无效信息缓存"
-
-msgid "No network configured on this device"
-msgstr "本设备未配置网络"
-
-msgid "No network name specified"
-msgstr "未指定网络名"
-
-msgid "No package lists available"
-msgstr "无可用软件列表"
-
-msgid "No password set!"
-msgstr "未设置密码！"
-
-msgid "No rules in this chain"
-msgstr "本链没有规则"
-
-msgid "No zone assigned"
-msgstr "未指定区域"
-
-msgid "Noise"
-msgstr "噪声"
-
-msgid "Noise:"
-msgstr "噪声:"
-
-msgid "None"
-msgstr "无"
-
-msgid "Normal"
-msgstr "正常"
-
-msgid "Not Found"
-msgstr "未找到"
-
-msgid "Not associated"
-msgstr "未关联"
-
-msgid "Not connected"
-msgstr "未连接"
-
-msgid "Note: Configuration files will be erased."
-msgstr "注意：配置文件将被删除。"
-
-msgid "Notice"
-msgstr "注意"
-
-msgid "Nslookup"
-msgstr "Nslookup"
-
-msgid "OK"
-msgstr "OK"
-
-msgid "OPKG-Configuration"
-msgstr "OPKG-配置"
-
-msgid "Off-State Delay"
-msgstr "关闭时间"
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr "配置网络接口信息。"
-
-msgid "On-State Delay"
-msgstr "通电时间"
-
-msgid "One of hostname or mac address must be specified!"
-msgstr "请指定主机名或MAC地址！"
-
-msgid "One or more fields contain invalid values!"
-msgstr "一个或多个选项值有误！"
-
-msgid "One or more required fields have no value!"
-msgstr "一个或多个必选项值为空！"
-
-msgid "Open list..."
-msgstr "打开列表..."
-
-msgid "Option changed"
-msgstr "修改的选项"
-
-msgid "Option removed"
-msgstr "移除的选项"
-
-msgid "Options"
-msgstr "选项"
-
-msgid "Other:"
-msgstr "其余:"
-
-msgid "Out"
-msgstr "出口"
-
-msgid "Outbound:"
-msgstr "出站:"
-
-msgid "Outdoor Channels"
-msgstr "户外频道"
-
-msgid "Override MAC address"
-msgstr "克隆MAC地址"
-
-msgid "Override MTU"
-msgstr "设置MTU"
-
-msgid "Override the gateway in DHCP responses"
-msgstr "更新网关"
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr "更新子网掩码。"
-
-msgid "Override the table used for internal routes"
-msgstr "更新内部路由表"
-
-msgid "Overview"
-msgstr "总览"
-
-msgid "Owner"
-msgstr "用户名"
-
-msgid "PAP/CHAP password"
-msgstr "PAP/CHAP密码"
-
-msgid "PAP/CHAP username"
-msgstr "PAP/CHAP用户名"
-
-msgid "PID"
-msgstr "PID"
-
-msgid "PIN"
-msgstr "PIN"
-
-msgid "PPP"
-msgstr "PPP"
-
-msgid "PPPoA Encapsulation"
-msgstr "PPPoA封包"
-
-msgid "PPPoATM"
-msgstr "PPPoATM"
-
-msgid "PPPoE"
-msgstr "PPPoE"
-
-msgid "PPtP"
-msgstr "PPtP"
-
-msgid "Package libiwinfo required!"
-msgstr "需要libiwinfo软件包！"
-
-msgid "Package lists are older than 24 hours"
-msgstr "软件包列表已超过24小时未更新"
-
-msgid "Package name"
-msgstr "软件包名称"
-
-msgid "Packets"
-msgstr "数据包"
-
-msgid "Part of zone %q"
-msgstr "区域 %q"
-
-msgid "Password"
-msgstr "密码"
-
-msgid "Password authentication"
-msgstr "密码验证"
-
-msgid "Password of Private Key"
-msgstr "私有密钥"
-
-msgid "Password successfully changed!"
-msgstr "密码修改成功！"
-
-msgid "Path to CA-Certificate"
-msgstr "CA证书路径"
-
-msgid "Path to Client-Certificate"
-msgstr "客户端证书路径"
-
-msgid "Path to Private Key"
-msgstr "私钥路径"
-
-msgid "Path to executable which handles the button event"
-msgstr "处理按键动作的可执行文件路径"
-
-msgid "Peak:"
-msgstr "峰值:"
-
-msgid "Perform reboot"
-msgstr "执行重启"
-
-msgid "Perform reset"
-msgstr "执行复位"
-
-msgid "Phy Rate:"
-msgstr "物理速率:"
-
-msgid "Physical Settings"
-msgstr "物理设置"
-
-msgid "Ping"
-msgstr "Ping"
-
-msgid "Pkts."
-msgstr "数据包"
-
-msgid "Please enter your username and password."
-msgstr "请输入用户名和密码。"
-
-msgid "Please wait: Device rebooting..."
-msgstr "请稍等：设备重启中..."
-
-msgid "Policy"
-msgstr "策略"
-
-msgid "Port"
-msgstr "端口"
-
-msgid "Port %d"
-msgstr "端口 %d"
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr "端口 %d 在多个VLAN中均未关联！"
-
-msgid "Port status:"
-msgstr "端口状态："
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr "在指定数量的LCP响应故障后假定链路已断开，0为忽略故障"
-
-msgid "Prevents client-to-client communication"
-msgstr "禁止客户端间通信"
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr "Prism2/2.5/3 802.11b 无线网卡"
-
-msgid "Proceed"
-msgstr "执行"
-
-msgid "Processes"
-msgstr "系统进程"
-
-msgid "Prot."
-msgstr "协议"
-
-msgid "Protocol"
-msgstr "协议"
-
-msgid "Protocol family"
-msgstr "协议族"
-
-msgid "Protocol of the new interface"
-msgstr "新接口的协议"
-
-msgid "Protocol support is not installed"
-msgstr "未安装协议支持"
-
-msgid "Provide NTP server"
-msgstr "NTP服务器"
-
-msgid "Provide new network"
-msgstr "添加新网络"
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr "伪装Ad-Hoc(ahdemo)"
-
-msgid "Quality"
-msgstr "质量"
-
-msgid "RTS/CTS Threshold"
-msgstr "RTS/CTS阈值"
-
-msgid "RX"
-msgstr "接收"
-
-msgid "RX Rate"
-msgstr "接收速率"
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr "MediaTek/RaLink 802.11%s 无线网卡"
-
-msgid "Radius-Accounting-Port"
-msgstr "Radius 计费端口"
-
-msgid "Radius-Accounting-Secret"
-msgstr "Radius 计费密钥"
-
-msgid "Radius-Accounting-Server"
-msgstr "Radius 计费服务器"
-
-msgid "Radius-Authentication-Port"
-msgstr "Radius 认证端口"
-
-msgid "Radius-Authentication-Secret"
-msgstr "Radius 认证密钥"
-
-msgid "Radius-Authentication-Server"
-msgstr "Radius 认证服务器"
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-"根据<code>/etc/ethers</code>来配置<abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr>-服务器"
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-"确定要删除此接口？删除操作无法撤销！\\\n"
-"删除此接口，可能导致无法再访问路由器！"
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-"确定要删除此无线网络？删除操作无法撤销！\\\n"
-"删除此无线网络，可能导致无法再访问路由器！"
-
-msgid "Really reset all changes?"
-msgstr "确定要放弃所有更改？"
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-"确定要关闭接口\"%s\" ？\\\n"
-"删除此网络，可能导致无法再访问路由器！"
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-"确定要关闭此网络？\\\n"
-"关闭此网络，可能导致无法再访问路由器！"
-
-msgid "Really switch protocol?"
-msgstr "确定要切换协议？"
-
-msgid "Realtime Connections"
-msgstr "实时连接"
-
-msgid "Realtime Graphs"
-msgstr "实时信息"
-
-msgid "Realtime Load"
-msgstr "实时负载"
-
-msgid "Realtime Traffic"
-msgstr "实时流量"
-
-msgid "Realtime Wireless"
-msgstr "实时无线"
-
-msgid "Rebind protection"
-msgstr "重绑定保护"
-
-msgid "Reboot"
-msgstr "重启"
-
-msgid "Rebooting..."
-msgstr "重启中..."
-
-msgid "Reboots the operating system of your device"
-msgstr "重启OpenWrt"
-
-msgid "Receive"
-msgstr "接收"
-
-msgid "Receiver Antenna"
-msgstr "接收天线"
-
-msgid "Reconnect this interface"
-msgstr "重连此接口"
-
-msgid "Reconnecting interface"
-msgstr "重连接口中..."
-
-msgid "References"
-msgstr "引用"
-
-msgid "Regulatory Domain"
-msgstr "无线网络国家区域"
-
-msgid "Relay"
-msgstr "中继"
-
-msgid "Relay Bridge"
-msgstr "中继桥"
-
-msgid "Relay between networks"
-msgstr "网络间中继"
-
-msgid "Relay bridge"
-msgstr "中继桥"
-
-msgid "Remote IPv4 address"
-msgstr "远程IPv4地址"
-
-msgid "Remove"
-msgstr "移除"
-
-msgid "Repeat scan"
-msgstr "重新扫描"
-
-msgid "Replace entry"
-msgstr "重置条目"
-
-msgid "Replace wireless configuration"
-msgstr "重置无线配置"
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr "某些ISP需要，例如:同轴线网络DOCSIS 3"
-
-msgid "Reset"
-msgstr "复位"
-
-msgid "Reset Counters"
-msgstr "复位计数器"
-
-msgid "Reset to defaults"
-msgstr "恢复到出厂设置"
-
-msgid "Resolv and Hosts Files"
-msgstr "HOSTS和解析文件"
-
-msgid "Resolve file"
-msgstr "解析文件"
-
-msgid "Restart"
-msgstr "重启"
-
-msgid "Restart Firewall"
-msgstr "重启防火墙"
-
-msgid "Restore backup"
-msgstr "恢复配置"
-
-msgid "Reveal/hide password"
-msgstr "显示/隐藏 密码"
-
-msgid "Revert"
-msgstr "放弃"
-
-msgid "Root"
-msgstr "Root"
-
-msgid "Root directory for files served via TFTP"
-msgstr "TFTP服务器的根目录"
-
-msgid "Router Model"
-msgstr "主机型号"
-
-msgid "Router Name"
-msgstr "系统名称"
-
-msgid "Router Password"
-msgstr "主机密码"
-
-msgid "Routes"
-msgstr "路由表"
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr "路由表描述了数据包的可达路径。"
-
-msgid "Rule #"
-msgstr "规则 #"
-
-msgid "Run a filesystem check before mounting the device"
-msgstr "挂载设备前运行文件系统检查"
-
-msgid "Run filesystem check"
-msgstr "文件系统检查"
-
-msgid "SSH Access"
-msgstr "SSH访问"
-
-msgid "SSH-Keys"
-msgstr "SSH-密钥"
-
-msgid "SSID"
-msgstr "SSID"
-
-msgid "Save"
-msgstr "保存"
-
-msgid "Save & Apply"
-msgstr "保存&应用"
-
-msgid "Save &#38; Apply"
-msgstr "保存&#38;应用"
-
-msgid "Scan"
-msgstr "搜索"
-
-msgid "Scheduled Tasks"
-msgstr "计划任务"
-
-msgid "Section added"
-msgstr "添加的区域"
-
-msgid "Section removed"
-msgstr "移除的区域"
-
-msgid "See \"mount\" manpage for details"
-msgstr "详参\"mount\"联机帮助"
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr "定时发送LCP响应(秒)，仅在结合了故障阈值时有效"
-
-msgid "Send router solicitations"
-msgstr "发送路由请求"
-
-msgid "Separate Clients"
-msgstr "隔离客户端"
-
-msgid "Separate WDS"
-msgstr "隔离WDS"
-
-msgid "Server Settings"
-msgstr "服务器设置"
-
-msgid "Service Name"
-msgstr "服务名"
-
-msgid "Service Type"
-msgstr "服务类型"
-
-msgid "Services"
-msgstr "服务"
-
-msgid "Setup DHCP Server"
-msgstr "配置DHCP服务器"
-
-msgid "Setup Time Synchronization"
-msgstr "设置时间同步"
-
-msgid "Show current backup file list"
-msgstr "显示当前文件备份列表"
-
-msgid "Shutdown this interface"
-msgstr "关闭此接口"
-
-msgid "Shutdown this network"
-msgstr "关闭此网络"
-
-msgid "Signal"
-msgstr "信号"
-
-msgid "Signal:"
-msgstr "信号:"
-
-msgid "Size"
-msgstr "大小"
-
-msgid "Skip"
-msgstr "跳过"
-
-msgid "Skip to content"
-msgstr "跳到内容"
-
-msgid "Skip to navigation"
-msgstr "跳转到导航"
-
-msgid "Slot time"
-msgstr "时隙"
-
-msgid "Software"
-msgstr "软件包"
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr "一些项目的值无效，无法保存！"
-
-msgid "Sorry, the object you requested was not found."
-msgstr "对不起，请求的目标未找到。"
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr "对不起，服务器遇到未知错误。"
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-"抱歉，当前系统不支持sysupgrade升级，需手动刷新固件。请参考OpenWrt Wiki中此设"
-"备特定的安装向导。"
-
-msgid "Sort"
-msgstr "排序"
-
-msgid "Source"
-msgstr "源地址"
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr "指定通告的首选前缀生存时间(秒)"
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr "指定通告的有效前缀生存时间(秒)"
-
-msgid "Specifies the button state to handle"
-msgstr "指定要处理的按键状态"
-
-msgid "Specifies the directory the device is attached to"
-msgstr "指定设备的挂载目录"
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr "指定<em>Dropbear</em>的监听端口"
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr "指定假设主机已丢失的最大失败ARP请求数"
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr "指定假设主机已丢失的最大时间(秒)"
-
-msgid "Specify the secret encryption key here."
-msgstr "在此指定密钥。"
-
-# 关联了 启动项 和 接口>LAN>DHCP服务器>网址分配基址
-msgid "Start"
-msgstr "开始"
-
-msgid "Start priority"
-msgstr "启动优先级"
-
-msgid "Startup"
-msgstr "启动项"
-
-msgid "Static IPv4 Routes"
-msgstr "静态IPv4路由"
-
-msgid "Static IPv6 Routes"
-msgstr "静态IPv6路由"
-
-msgid "Static Leases"
-msgstr "静态地址分配"
-
-msgid "Static Routes"
-msgstr "静态路由"
-
-msgid "Static WDS"
-msgstr "静态WDS"
-
-msgid "Static address"
-msgstr "静态地址"
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-"静态租约用于给DHCP客户端分配固定的IP地址和主机标识。只有指定的主机才能连接，"
-"并且接口须为非动态配置。"
-
-msgid "Status"
-msgstr "状态"
-
-msgid "Stop"
-msgstr "关闭"
-
-msgid "Strict order"
-msgstr "严谨查序"
-
-msgid "Submit"
-msgstr "提交"
-
-msgid "Swap Entry"
-msgstr "Swap项"
-
-msgid "Switch"
-msgstr "交换机"
-
-msgid "Switch %q"
-msgstr "交换机 %q"
-
-msgid "Switch %q (%s)"
-msgstr "交换机%q (%s)"
-
-msgid "Switch protocol"
-msgstr "切换协议"
-
-msgid "Sync with browser"
-msgstr "同步浏览器时间"
-
-msgid "Synchronizing..."
-msgstr "同步中..."
-
-msgid "System"
-msgstr "系统"
-
-msgid "System Log"
-msgstr "系统日志"
-
-msgid "System Properties"
-msgstr "系统属性"
-
-msgid "System log buffer size"
-msgstr "系统日志缓冲区大小"
-
-msgid "TCP:"
-msgstr "TCP:"
-
-msgid "TFTP Settings"
-msgstr "TFTP设置"
-
-msgid "TFTP server root"
-msgstr "TFTP服务器根目录"
-
-msgid "TX"
-msgstr "发送"
-
-msgid "TX Rate"
-msgstr "发送速率"
-
-msgid "Table"
-msgstr "表"
-
-msgid "Target"
-msgstr "对象"
-
-msgid "Terminate"
-msgstr "关闭"
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-"<em>设备配置</em>区域可配置无线的硬件参数，比如信道、发射功率或发射天线(如果"
-"此无线模块硬件支持多SSID，则全部SSID共用此设备配置)。<em>接口配置</em>区域则"
-"可配置此网络的工作模式和加密等。"
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr "软件包<em>libiwinfo-lua</em>未安装。必需安装此组件以配置无线！"
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr "运营商特定的IPv6前缀，通常以<code>::</code>为结尾"
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-"合法字符：<code>A-Z</code>, <code>a-z</code>, <code>0-9</code> 和 <code>_</"
-"code>"
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-"存储器或分区的设备节点，(<abbr title=\"for example\">例如</abbr> <code>/dev/"
-"sda1</code>)"
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-"用于格式化存储器的文件系统，(<abbr title=\"for example\">例如</abbr> "
-"<samp><abbr title=\"Third Extended Filesystem\">ext4</abbr></samp>)"
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr "固件已上传，请注意核对文件大小和校验值！<br />刷新过程切勿断电！"
-
-msgid "The following changes have been committed"
-msgstr "以下更改已提交"
-
-msgid "The following changes have been reverted"
-msgstr "以下更改已放弃"
-
-msgid "The following rules are currently active on this system."
-msgstr "系统中的活跃连接。"
-
-msgid "The given network name is not unique"
-msgstr "给定的网络名重复"
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr "本机的硬件不支持多SSID，继续进行将会覆盖现有配置。"
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr "bit格式的IPv4前缀长度, 其余的用在IPv6地址."
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr "bit格式的IPv6前缀长度"
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-"本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</abbr>，"
-"并支持电脑间的直接通讯。<abbr title=\"Virtual Local Area Network\">VLAN</"
-"abbr>也常用于分割不同网段。默认通常是一条上行端口连接ISP，其余端口为本地子"
-"网。"
-
-msgid "The selected protocol needs a device assigned"
-msgstr "所选的协议需要分配设备"
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr "系统正在删除配置分区，完成后会自动重启。"
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-"正在刷新系统...<br />切勿关闭电源! DO NOT POWER OFF THE DEVICE!<br />稍等数分"
-"钟即可重新连接到路由。可能需要更改计算机的IP地址以重新连接。"
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr "不支持所上传的文件格式。请确认选择的文件无误。"
-
-msgid "There are no active leases."
-msgstr "没有已分配的租约。"
-
-msgid "There are no pending changes to apply!"
-msgstr "没有待生效的更改！"
-
-msgid "There are no pending changes to revert!"
-msgstr "没有可放弃的更改！"
-
-msgid "There are no pending changes!"
-msgstr "没有待生效的更改！"
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr "尚未分配设备，请在\"物理设置\"选项卡中选择网络设备"
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr "尚未设置密码。请为root用户设置密码以保护主机并开启SSH。"
-
-msgid "This IPv4 address of the relay"
-msgstr "中继的IPv4地址"
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-"系统升级时要保存的配置文件和目录的清单。目录/etc/config/内修改过的文件以及部"
-"分其他配置会被自动保存。"
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr "这是32 byte hex编码的用户ID，不是登录名"
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr "启动脚本插入到'exit 0'之前即可随系统启动运行。"
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr "隧道代理分配的本地终端地址，通常以<code>:2</code>结尾"
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-"这是内网中唯一的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>服务器"
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr "自定义系统crontab中的计划任务。"
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr "这通常是隧道代理所管理的最近的PoP的地址"
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr "系统中正在运行的进程和其状态信息。"
-
-msgid "This page allows the configuration of custom button actions"
-msgstr "自定义按键动作。"
-
-msgid "This page gives an overview over currently active network connections."
-msgstr "活跃的网络连接概况。"
-
-msgid "This section contains no values yet"
-msgstr "尚无任何配置"
-
-msgid "Time Synchronization"
-msgstr "时间同步"
-
-msgid "Time Synchronization is not configured yet."
-msgstr "尚未配置时间同步"
-
-msgid "Timezone"
-msgstr "时区"
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr "上传备份存档以恢复配置。"
-
-msgid "Total Available"
-msgstr "可用数"
-
-msgid "Traceroute"
-msgstr "Traceroute"
-
-msgid "Traffic"
-msgstr "流量"
-
-msgid "Transfer"
-msgstr "传输"
-
-msgid "Transmission Rate"
-msgstr "传送速率"
-
-msgid "Transmit"
-msgstr "传送"
-
-msgid "Transmit Power"
-msgstr "无线电功率"
-
-msgid "Transmitter Antenna"
-msgstr "传送天线"
-
-msgid "Trigger"
-msgstr "触发"
-
-msgid "Trigger Mode"
-msgstr "触发模式"
-
-msgid "Tunnel ID"
-msgstr "隧道ID"
-
-msgid "Tunnel Interface"
-msgstr "隧道接口"
-
-msgid "Turbo Mode"
-msgstr "Turbo模式"
-
-msgid "Tx-Power"
-msgstr "传输功率"
-
-msgid "Type"
-msgstr "类型"
-
-msgid "UDP:"
-msgstr "UDP:"
-
-msgid "UMTS only"
-msgstr "仅UMTS(WCDMA)"
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr "UMTS/GPRS/EV-DO"
-
-msgid "USB Device"
-msgstr "USB设备"
-
-msgid "UUID"
-msgstr "UUID"
-
-msgid "Unable to dispatch"
-msgstr "无法调度"
-
-msgid "Unknown"
-msgstr "未知"
-
-msgid "Unknown Error, password not changed!"
-msgstr "未知错误，密码未更改！"
-
-msgid "Unmanaged"
-msgstr "不配置协议"
-
-msgid "Unsaved Changes"
-msgstr "未保存的配置"
-
-msgid "Unsupported protocol type."
-msgstr "不支持的协议类型"
-
-msgid "Update lists"
-msgstr "刷新列表"
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr "上传兼容的sysupgrade固件以刷新当前系统。"
-
-msgid "Upload archive..."
-msgstr "上传备份..."
-
-msgid "Uploaded File"
-msgstr "上传的文件"
-
-msgid "Uptime"
-msgstr "运行时间"
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr "使用<code>/etc/ethers</code>配置"
-
-msgid "Use DHCP gateway"
-msgstr "使用DHCP网关"
-
-msgid "Use DNS servers advertised by peer"
-msgstr "使用端局通告的DNS服务器"
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr "参考ISO/IEC 3166 alpha2国家代码。"
-
-msgid "Use MTU on tunnel interface"
-msgstr "隧道接口的MTU"
-
-msgid "Use TTL on tunnel interface"
-msgstr "隧道接口的TTL"
-
-msgid "Use as root filesystem"
-msgstr "设置为根文件系统"
-
-msgid "Use broadcast flag"
-msgstr "使用广播标签"
-
-msgid "Use custom DNS servers"
-msgstr "使用自定义的DNS服务器"
-
-msgid "Use default gateway"
-msgstr "使用默认网关"
-
-msgid "Use gateway metric"
-msgstr "使用网关跃点"
-
-msgid "Use preferred lifetime"
-msgstr "使用首选生存时间"
-
-msgid "Use routing table"
-msgstr "使用路由表"
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-"使用<em>添加</em>来增加新的租约条目。使用<em>MAC-地址</em>鉴别主机，<em>IPv4-"
-"地址</em>分配地址，<em>主机名</em>分配标识。"
-
-msgid "Use valid lifetime"
-msgstr "使用有效生存时间"
-
-msgid "Used"
-msgstr "已用"
-
-msgid "Used Key Slot"
-msgstr "启用密码组"
-
-msgid "Username"
-msgstr "用户名"
-
-msgid "VC-Mux"
-msgstr "VC-Mux"
-
-msgid "VLAN Interface"
-msgstr "VLAN接口"
-
-msgid "VLANs on %q"
-msgstr "%q上的VLAN"
-
-msgid "VLANs on %q (%s)"
-msgstr "%q (%s)上的VLAN"
-
-msgid "VPN Server"
-msgstr "VPN服务器"
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr "请求DHCP时发送的Vendor Class"
-
-msgid "Verify"
-msgstr "验证"
-
-msgid "Version"
-msgstr "版本"
-
-msgid "WDS"
-msgstr "WDS"
-
-msgid "WEP Open System"
-msgstr "WEP开放认证"
-
-msgid "WEP Shared Key"
-msgstr "WEP共享密钥"
-
-msgid "WEP passphrase"
-msgstr "WEP密钥"
-
-msgid "WMM Mode"
-msgstr "WMM"
-
-msgid "WPA passphrase"
-msgstr "WPA密钥"
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-"WPA加密需要安装wpa_supplicant(客户端模式)或安装hostapd(接入点AP、点对点ad-hoc"
-"模式)。"
-
-msgid "Waiting for changes to be applied..."
-msgstr "正在应用更改..."
-
-msgid "Waiting for command to complete..."
-msgstr "正在执行命令..."
-
-msgid "Warning"
-msgstr "警告"
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr "警告: 有尚未保存的更改，重启将丢失!"
-
-msgid "Wifi"
-msgstr "无线"
-
-msgid "Wireless"
-msgstr "无线"
-
-msgid "Wireless Adapter"
-msgstr "无线适配器"
-
-msgid "Wireless Network"
-msgstr "无线网络"
-
-msgid "Wireless Overview"
-msgstr "无线概况"
-
-msgid "Wireless Security"
-msgstr "无线安全"
-
-msgid "Wireless is disabled or not associated"
-msgstr "未开启或未关联无线"
-
-msgid "Wireless is restarting..."
-msgstr "重启无线中..."
-
-msgid "Wireless network is disabled"
-msgstr "无线已禁用"
-
-msgid "Wireless network is enabled"
-msgstr "无线网络开关"
-
-msgid "Wireless restarted"
-msgstr "无线已重启"
-
-msgid "Wireless shut down"
-msgstr "无线已关闭"
-
-msgid "Write received DNS requests to syslog"
-msgstr "将收到的DNS请求写入系统日志"
-
-msgid "XR Support"
-msgstr "XR支持"
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-"启用或禁用已安装的启动脚本。更改在设备重启后生效。<br /><strong>警告：如果禁"
-"用了必要的启动脚本，比如\"network\"，可能会导致设备无法访问！</strong>"
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr "LUCI的正常运行需要开启浏览器的Java Script支持。"
-
-msgid "any"
-msgstr "任意"
-
-msgid "auto"
-msgstr "自动"
-
-msgid "baseT"
-msgstr "baseT"
-
-msgid "bridged"
-msgstr "桥接的"
-
-msgid "create:"
-msgstr "创建:"
-
-msgid "creates a bridge over specified interface(s)"
-msgstr "为指定接口创建桥接"
-
-msgid "dB"
-msgstr "dB"
-
-msgid "dBm"
-msgstr "dBm"
-
-msgid "disable"
-msgstr "禁用"
-
-msgid "expired"
-msgstr "过期时间"
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-"存放<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>租约的文件"
-
-msgid "forward"
-msgstr "转发"
-
-msgid "full-duplex"
-msgstr "全双工"
-
-msgid "half-duplex"
-msgstr "半双工"
-
-msgid "help"
-msgstr "帮助"
-
-msgid "hidden"
-msgstr "隐藏"
-
-msgid "if target is a network"
-msgstr "如果对象是一个网络"
-
-msgid "input"
-msgstr "输入"
-
-msgid "kB"
-msgstr "kB"
-
-msgid "kB/s"
-msgstr "kB/s"
-
-msgid "kbit/s"
-msgstr "kbit/s"
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr>解析文件"
-
-msgid "no"
-msgstr "no"
-
-msgid "no link"
-msgstr "未连接"
-
-msgid "none"
-msgstr "无"
-
-msgid "off"
-msgstr "关"
-
-msgid "on"
-msgstr "开"
-
-msgid "open"
-msgstr "开放式"
-
-msgid "routed"
-msgstr "已路由"
-
-msgid "tagged"
-msgstr "关联"
-
-msgid "unknown"
-msgstr "未知"
-
-msgid "unlimited"
-msgstr "无限制"
-
-msgid "unspecified"
-msgstr "未指定"
-
-msgid "unspecified -or- create:"
-msgstr "未指定 // 创建:"
-
-msgid "untagged"
-msgstr "不关联"
-
-msgid "yes"
-msgstr "是"
-
-msgid "« Back"
-msgstr "« 后退"
-
-#~ msgid "Waiting for router..."
-#~ msgstr "等待路由器..."
-
-#~ msgid "Enable builtin NTP server"
-#~ msgstr "开启内置NTP服务器"
-
-#~ msgid "Active Leases"
-#~ msgstr "活动的租约"
-
-#~ msgid "Open"
-#~ msgstr "打开"
-
-#~ msgid "KB"
-#~ msgstr "KB"
-
-#~ msgid "Bit Rate"
-#~ msgstr "比特率"
-
-#~ msgid "Configuration / Apply"
-#~ msgstr "设置 /应用"
-
-#~ msgid "Configuration / Changes"
-#~ msgstr "设置 / 修改"
-
-#~ msgid "Configuration / Revert"
-#~ msgstr "设置 / 重置"
-
-#~ msgid "MAC"
-#~ msgstr "MAC"
-
-#~ msgid "MAC Address"
-#~ msgstr "MAC地址"
-
-#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
-#~ msgstr "<abbr title=\"Encrypted\">加密</abbr>"
-
-#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
-#~ msgstr "搜索<abbr title=\"Wireless Local Area Network\">WLAN</abbr>"
-
-#~ msgid ""
-#~ "Choose the network you want to attach to this wireless interface. Select "
-#~ "<em>unspecified</em> to not attach any network or fill out the "
-#~ "<em>create</em> field to define a new network."
-#~ msgstr ""
-#~ "请选择你需要链接到无线网络接口的网络. 如果不链接到任何网络请选择 <em>未指"
-#~ "定</em>,如果需要创建新网络请点<em>创建</em>."
-
-#~ msgid "Create Network"
-#~ msgstr "创建一个网络"
-
-#~ msgid "Link"
-#~ msgstr "链接"
-
-#~ msgid "Networks"
-#~ msgstr "网络"
-
-#~ msgid "Power"
-#~ msgstr "Power"
-
-#~ msgid "Wifi networks in your local environment"
-#~ msgstr "扫描到的无线热点"
-
-#~ msgid ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-#~ msgstr ""
-#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
-#~ "address/prefix"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-服务器"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
-#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-广播"
-
-#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
-#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址"
-
-#~ msgid "IP-Aliases"
-#~ msgstr "IP-Aliases"
-
-#~ msgid "IPv6 Setup"
-#~ msgstr "IPv6 设置"
-
-#~ msgid ""
-#~ "Note: If you choose an interface here which is part of another network, "
-#~ "it will be moved into this network."
-#~ msgstr ""
-#~ "注意：当你选择一个已经存在与一个网络中的接口时，它将会被移除那个网络。"
-
-#~ msgid ""
-#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
-#~ "lose access to this router if you are connected via this interface."
-#~ msgstr ""
-#~ "Really delete this interface? The deletion cannot be undone!\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
-#~ "might lose access to this router if you are connected via this network."
-#~ msgstr ""
-#~ "Really delete this wireless network? The deletion cannot be undone!\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "network."
-
-#~ msgid ""
-#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
-#~ "if you are connected via this interface."
-#~ msgstr ""
-#~ "Really shutdown interface \"%s\" ?\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might lose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "Really shutdown network ?\n"
-#~ "You might lose access to this router if you are connected via this "
-#~ "interface."
-
-#~ msgid ""
-#~ "The network ports on your router can be combined to several <abbr title="
-#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
-#~ "Network\">VLAN</abbr>s are often used to separate different network "
-#~ "segments. Often there is by default one Uplink port for a connection to "
-#~ "the next greater network like the internet and other ports for a local "
-#~ "network."
-#~ msgstr ""
-#~ "本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</"
-#~ "abbr>，并支持电脑间的直接通讯；<abbr title=\"Virtual Local Area Network"
-#~ "\">VLAN</abbr>也常用于分割不同网段；默认通常是一条上传端口连接ISP，其余端"
-#~ "口为本地子网。"
-
-#~ msgid "Enable buffering"
-#~ msgstr "开启缓冲"
-
-#~ msgid "IPv6-over-IPv4"
-#~ msgstr "IPv6-over-IPv4"
-
-#~ msgid "Custom Files"
-#~ msgstr "自定义文件"
-
-#~ msgid "Custom files"
-#~ msgstr "自定义文件"
-
-#~ msgid "Detected Files"
-#~ msgstr "查询到的文件"
-
-#~ msgid "Detected files"
-#~ msgstr "查询到的文件"
-
-#~ msgid "Files to be kept when flashing a new firmware"
-#~ msgstr "更新固件时被保存的文件"
-
-#~ msgid "General"
-#~ msgstr "基本信息"
-
-#~ msgid ""
-#~ "Here you can customize the settings and the functionality of <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组"
-#~ "件和功能。"
-
-#~ msgid "Post-commit actions"
-#~ msgstr "Post-commit操作"
-
-#~ msgid ""
-#~ "The following files are detected by the system and will be kept "
-#~ "automatically during sysupgrade"
-#~ msgstr "更新固件时要保存的文件"
-
-#~ msgid ""
-#~ "These commands will be executed automatically when a given <abbr title="
-#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-#~ "allowing changes to be applied instantly."
-#~ msgstr ""
-#~ "当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
-#~ "后，这些命令将被自动执行。"
-
-#~ msgid ""
-#~ "This is a list of shell glob patterns for matching files and directories "
-#~ "to include during sysupgrade"
-#~ msgstr "系统升级时要保存的配置文件以及目录的串列清单"
-
-#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
-#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-#~ msgstr ""
-#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
-
-#~ msgid "AHCP Settings"
-#~ msgstr "AHCP设置"
-
-#~ msgid "ARP ping retries"
-#~ msgstr "重试ARP ping"
-
-#~ msgid "ATM Settings"
-#~ msgstr "ATM设置"
-
-#~ msgid "Accept Router Advertisements"
-#~ msgstr "接收路由公告"
-
-#~ msgid "Access point (APN)"
-#~ msgstr "接入点(APN)"
-
-#~ msgid "Additional pppd options"
-#~ msgstr "附加pppd选项"
-
-#~ msgid "Allowed range is 1 to FFFF"
-#~ msgstr "允许范围：1 ~ FFFF"
-
-#~ msgid "Automatic Disconnect"
-#~ msgstr "自动断开"
-
-#~ msgid "Backup Archive"
-#~ msgstr "备份的存档"
-
-#~ msgid ""
-#~ "Configure the local DNS server to use the name servers adverticed by the "
-#~ "PPP peer"
-#~ msgstr "本地DNS服务器使用PPP端局提供的域名服务器"
-
-#~ msgid "Connect script"
-#~ msgstr "连接脚本"
-
-#~ msgid "Create backup"
-#~ msgstr "创建备份"
-
-#~ msgid "Default"
-#~ msgstr "默认"
-
-#~ msgid "Disconnect script"
-#~ msgstr "断开脚本"
-
-#~ msgid "Edit package lists and installation targets"
-#~ msgstr "修改软件包的同步源和安装地址"
-
-#~ msgid "Enable 4K VLANs"
-#~ msgstr "开启4K VLAN"
-
-#~ msgid "Enable IPv6 on PPP link"
-#~ msgstr "在PPP链路上启用IPv6"
-
-#~ msgid "Firmware image"
-#~ msgstr "固件文件"
-
-#~ msgid "Forward DHCP"
-#~ msgstr "转发DHCP"
-
-#~ msgid "Forward broadcasts"
-#~ msgstr "转发广播"
-
-#~ msgid "HE.net Tunnel ID"
-#~ msgstr "HE.net隧道ID"
-
-#~ msgid ""
-#~ "Here you can backup and restore your router configuration and - if "
-#~ "possible - reset the router to the default settings."
-#~ msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
-
-#~ msgid "Installation targets"
-#~ msgstr "安装位置"
-
-#~ msgid "Keep configuration files"
-#~ msgstr "保留配置文件"
-
-#~ msgid "Keep-Alive"
-#~ msgstr "保持活动"
-
-#~ msgid "Kernel"
-#~ msgstr "内核"
-
-#~ msgid ""
-#~ "Let pppd replace the current default route to use the PPP interface after "
-#~ "successful connect"
-#~ msgstr "PPP连接成功后替换当前默认路由为pppd"
-
-#~ msgid "Let pppd run this script after establishing the PPP link"
-#~ msgstr "PPP连接建立后运行此脚本"
-
-#~ msgid "Let pppd run this script before tearing down the PPP link"
-#~ msgstr "PPP连接断开前运行此脚本"
-
-#~ msgid ""
-#~ "Make sure that you provide the correct pin code here or you might lock "
-#~ "your sim card!"
-#~ msgstr "请确认pin码正确，并且没有锁定sim卡！"
-
-#~ msgid ""
-#~ "Most of them are network servers, that offer a certain service for your "
-#~ "device or network like shell access, serving webpages like <abbr title="
-#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
-#~ "e-mails, ..."
-#~ msgstr ""
-#~ "这些大部分是为设备或网络提供特定服务的，比如shell访问，<abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr> App，网间漫游，发送E-mail等..."
-
-#~ msgid "Number of failed connection tests to initiate automatic reconnect"
-#~ msgstr "启动自动重连的失败连接次数"
-
-#~ msgid "Override Gateway"
-#~ msgstr "更新网关"
-
-#~ msgid "PIN code"
-#~ msgstr "PIN码"
-
-#~ msgid "PPP Settings"
-#~ msgstr "PPP设置"
-
-#~ msgid "Package lists"
-#~ msgstr "软件同步源"
-
-#~ msgid ""
-#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
-#~ "VLAN ID added to received untagged frames."
-#~ msgstr ""
-#~ "端口的<abbr title=\"Primary VLAN IDs\">PVID</abbr>指定了添加到所接收的未标"
-#~ "记桢的默认VLAN ID。"
-
-#~ msgid "Port PVIDs on %q"
-#~ msgstr "分配%q的端口PVID"
-
-#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
-#~ msgstr "放弃所有配置并将路由复位到默认状态？"
-
-#~ msgid "Processor"
-#~ msgstr "处理器"
-
-#~ msgid "Radius-Port"
-#~ msgstr "Radius-端口"
-
-#~ msgid "Radius-Server"
-#~ msgstr "Radius-服务器"
-
-#~ msgid ""
-#~ "Really shutdown network ?\\nYou might loose access to this router if you "
-#~ "are connected via this interface."
-#~ msgstr ""
-#~ "真的要关闭此网络？\n"
-#~ "如果正由此网络管理路由，可能导致无法再管理路由器！"
-
-#~ msgid "Relay Settings"
-#~ msgstr "中继设置"
-
-#~ msgid "Replace default route"
-#~ msgstr "重置默认路由"
-
-#~ msgid "Reset router to defaults"
-#~ msgstr "恢复出厂设置"
-
-#~ msgid "Routing table ID"
-#~ msgstr "路由表ID"
-
-#~ msgid ""
-#~ "Seconds to wait for the modem to become ready before attempting to connect"
-#~ msgstr "Modem尝试连接的就绪准备时间"
-
-#~ msgid "Send Router Solicitiations"
-#~ msgstr "发送路由探测"
-
-#~ msgid "Server IPv4-Address"
-#~ msgstr "服务器IPv4-地址"
-
-#~ msgid "Service type"
-#~ msgstr "服务类型"
-
-#~ msgid "Services and daemons perform certain tasks on your device."
-#~ msgstr "路由器上运行的部分任务和服务。"
-
-#~ msgid "Settings"
-#~ msgstr "设置"
-
-#~ msgid "Setup wait time"
-#~ msgstr "设置缓冲时间"
-
-#~ msgid ""
-#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
-#~ "You need to manually flash your device."
-#~ msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
-
-#~ msgid "Specify additional command line arguments for pppd here"
-#~ msgstr "指定附加命令行参数到pppd"
-
-#~ msgid "TTL"
-#~ msgstr "TTL"
-
-#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-#~ msgstr "modem的设备节点。例如/dev/ttyUSB0"
-
-#~ msgid "Time (in seconds) after which an unused connection will be closed"
-#~ msgstr "自动关闭空闲连接的延迟时间(秒)"
-
-#~ msgid "Time Server (rdate)"
-#~ msgstr "校时服务器(rdate)"
-
-#~ msgid "Tunnel Settings"
-#~ msgstr "隧道设置"
-
-#~ msgid "Update package lists"
-#~ msgstr "更新软件列表"
-
-#~ msgid "Upload an OpenWrt image file to reflash the device."
-#~ msgstr "上传OpenWrt固件以刷新设备。"
-
-#~ msgid "Upload image"
-#~ msgstr "上传固件"
-
-#~ msgid "Use peer DNS"
-#~ msgstr "使用对等DNS"
-
-#~ msgid "VLAN %d"
-#~ msgstr "VLAN %d"
-
-#~ msgid ""
-#~ "You can specify multiple DNS servers here, press enter to add a new "
-#~ "entry. Servers entered here will override automatically assigned ones."
-#~ msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
-
-#~ msgid ""
-#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-#~ msgstr ""
-#~ "UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装"
-#~ "\"ppp-mod-pppoa\",PPtP需安装\"pptp\"。"
-
-#~ msgid "back"
-#~ msgstr "后退"
-
-#~ msgid "buffered"
-#~ msgstr "已缓冲"
-
-#~ msgid "cached"
-#~ msgstr "已缓存"
-
-#~ msgid "free"
-#~ msgstr "空闲"
-
-#~ msgid "static"
-#~ msgstr "静态"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
-#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
-#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
-#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
-#~ "Apache-License."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一款嵌入式设备使"
-#~ "用的免费Lua软件，包含web框架和web界面。<abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>遵循Apache-License."
-
-#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
-#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-密钥"
-
-#~ msgid ""
-#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
-#~ "LuCI"
-#~ msgstr "一个用C语言和Lua实现的服务于LuCI的轻量级 HTTP/1.1 web服务器。"
-
-#~ msgid ""
-#~ "A small webserver which can be used to serve <abbr title=\"Lua "
-#~ "Configuration Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "一个用于<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的小型web服"
-#~ "务器。"
-
-#~ msgid "About"
-#~ msgstr "关于"
-
-#~ msgid "Active IP Connections"
-#~ msgstr "活动IP连接"
-
-#~ msgid "Addresses"
-#~ msgstr "地址"
-
-#~ msgid "Admin Password"
-#~ msgstr "管理密码"
-
-#~ msgid "Alias"
-#~ msgstr "别名"
-
-#~ msgid "Authentication Realm"
-#~ msgstr "验证范围"
-
-#~ msgid "Bridge Port"
-#~ msgstr "桥接端口"
-
-#~ msgid ""
-#~ "Change the password of the system administrator (User <code>root</code>)"
-#~ msgstr "修改管理员密码"
-
-#~ msgid "Client + WDS"
-#~ msgstr "客户端+WDS"
-
-#~ msgid "Configuration file"
-#~ msgstr "配置文件"
-
-#~ msgid "Connection timeout"
-#~ msgstr "连接超时"
-
-#~ msgid "Contributing Developers"
-#~ msgstr "特别致谢"
-
-#~ msgid "DHCP assigned"
-#~ msgstr "DHCP有效分配"
-
-#~ msgid "Document root"
-#~ msgstr "根文档"
-
-#~ msgid "Enable Keep-Alive"
-#~ msgstr "开启保持活动"
-
-#~ msgid "Enable device"
-#~ msgstr "开启设备"
-
-#~ msgid "Ethernet Bridge"
-#~ msgstr "以太网桥"
-
-#~ msgid ""
-#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
-#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
-#~ "authentication."
-#~ msgstr ""
-#~ "这里可以粘贴公用<abbr title=\"Secure Shell\">SSH</abbr>密钥以用于<abbr "
-#~ "title=\"Secure Shell\">SSH</abbr>公共密钥认证(每行一个密钥)。"
-
-#~ msgid "ID"
-#~ msgstr "ID"
-
-#~ msgid "IP Configuration"
-#~ msgstr "IP设置"
-
-#~ msgid "Interface Status"
-#~ msgstr "接口状态"
-
-#~ msgid "Lead Development"
-#~ msgstr "开发向导"
-
-#~ msgid "Master"
-#~ msgstr "Master"
-
-#~ msgid "Master + WDS"
-#~ msgstr "Master + WDS"
-
-#~ msgid "No address configured on this interface."
-#~ msgstr "本接口未设置地址"
-
-#~ msgid "Not configured"
-#~ msgstr "未设置"
-
-#~ msgid "Password successfully changed"
-#~ msgstr "密码已修改"
-
-#~ msgid "Plugin path"
-#~ msgstr "插件路径"
-
-#~ msgid "Ports"
-#~ msgstr "端口"
-
-#~ msgid "Primary"
-#~ msgstr "主要的"
-
-#~ msgid "Project Homepage"
-#~ msgstr "项目主页"
-
-#~ msgid "Pseudo Ad-Hoc"
-#~ msgstr "伪装Ad-Hoc"
-
-#~ msgid "STP"
-#~ msgstr "STP"
-
-#~ msgid "Thanks To"
-#~ msgstr "感谢"
-
-#~ msgid ""
-#~ "The realm which will be displayed at the authentication prompt for "
-#~ "protected pages."
-#~ msgstr "在有提示验证保护的网页时显示验证范围。"
-
-#~ msgid "Unknown Error"
-#~ msgstr "未知错误"
-
-#~ msgid "VLAN"
-#~ msgstr "VLAN"
-
-#~ msgid "defaults to <code>/etc/httpd.conf</code>"
-#~ msgstr "默认为<code>/etc/httpd.conf</code>"
-
-#~ msgid "Enable this switch"
-#~ msgstr "开启交换机"
-
-#~ msgid "OPKG error code %i"
-#~ msgstr "OPKG 出错代码 %i"
-
-#~ msgid "Package lists updated"
-#~ msgstr "更新软件包列表"
-
-#~ msgid "Reset switch during setup"
-#~ msgstr "设置时复位交换机"
-
-#~ msgid "Upgrade installed packages"
-#~ msgstr "升级已安装软件"
-
-#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
-#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-端口"
-
-#~ msgid ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
-#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
-#~ "Kamikaze."
-#~ msgstr ""
-#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一个免费的，灵活"
-#~ "的，可视化的用户界面，可用来配置OpenWrt。"
-
-#~ msgid "AP-Isolation"
-#~ msgstr "AP隔离"
-
-#~ msgid "Active IPv4-Routes"
-#~ msgstr "活动的IPv4链路"
-
-#~ msgid "adds domain names to hostentries in the resolv file"
-#~ msgstr "添加域名条目到主机解析文件"
-
-#~ msgid "Add the Wifi network to physical network"
-#~ msgstr "添加无线网络到物理网络"
-
-#~ msgid ""
-#~ "Also kernel or service logfiles can be viewed here to get an overview "
-#~ "over their current state."
-#~ msgstr "这里显示了系统日志，可以了解系统当前的运行状态。"
-
-#~ msgid "And now have fun with your router!"
-#~ msgstr "现在开始体验路由带来的乐趣吧!"
-
-#~ msgid ""
-#~ "As we always want to improve this interface we are looking forward to "
-#~ "your feedback and suggestions."
-#~ msgstr "我们一直在努力提升界面效果，并期待着您的意见与建议。"
-
-#~ msgid "Attach to existing network"
-#~ msgstr "连接现有网络"
-
-#~ msgid "Clamp Segment Size"
-#~ msgstr "固定段大小"
-
-#~ msgid "Configuration applied"
-#~ msgstr "设置已应用"
-
-#~ msgid "Create Or Attach Network"
-#~ msgstr "创建/连接 网络"
-
-#~ msgid "Devices"
-#~ msgstr "设备"
-
-#~ msgid "enable"
-#~ msgstr "启用"
-
-#~ msgid "Errors"
-#~ msgstr "错误"
-
-#~ msgid "Essentials"
-#~ msgstr "概要"
-
-#~ msgid ""
-#~ "Fixes problems with unreachable websites, submitting forms or other "
-#~ "unexpected behaviour for some ISPs."
-#~ msgstr "修复某些ISP的不可达网站或其他未知错误"
-
-#~ msgid ""
-#~ "filter useless <abbr title=\"Domain Name System\">DNS</abbr>-queries of "
-#~ "Windows-systems"
-#~ msgstr ""
-#~ "过滤无用的<abbr title=\"Domain Name System\">DNS</abbr>Windows-systems查询"
-
-#~ msgid "Hardware Address"
-#~ msgstr "硬件地址"
-
-#~ msgid "Hello!"
-#~ msgstr "Hello!"
-
-#~ msgid "Here you can configure installed wifi devices."
-#~ msgstr "这里可以配置已安装的无线设备。"
-
-#~ msgid ""
-#~ "Here you can find information about the current system status like <abbr "
-#~ "title=\"Central Processing Unit\">CPU</abbr> clock frequency, memory "
-#~ "usage or network interface data."
-#~ msgstr ""
-#~ "这里可以查看系统当前的状态信息，比如<abbr title=\"Central Processing Unit"
-#~ "\">CPU</abbr>频率、内存使用率或网络链接数据。"
-
-#~ msgid ""
-#~ "If the interface is attached to an existing network it will be "
-#~ "<em>bridged</em> to the existing interfaces and is covered by the "
-#~ "firewall zone of the choosen network.<br />Uncheck the attach option to "
-#~ "define a new standalone network for this interface."
-#~ msgstr ""
-#~ "如果连接在已有网络，那么它会被<em>桥接</em>到现有接口，并且被所选的防火墙"
-#~ "区域覆盖。取消附加选项可以重定义此接口为新的独立网络。"
-
-#~ msgid "Ignore <code>/etc/hosts</code>"
-#~ msgstr "忽略 <code>/etc/hosts</code>"
-
-#~ msgid "Independent (Ad-Hoc)"
-#~ msgstr "独立(点对点Ad-Hoc)"
-
-#~ msgid "Internet Connection"
-#~ msgstr "网络连接"
-
-#~ msgid "Join (Client)"
-#~ msgstr "加入(客户端)"
-
-#~ msgid "Leases"
-#~ msgstr "租约"
-
-#~ msgid "localises the hostname depending on its subnet"
-#~ msgstr "根据子网本地化主机名"
-
-#~ msgid "LuCI Components"
-#~ msgstr "LuCI 组件"
-
-#~ msgid ""
-#~ "Notice: In <abbr title=\"Lua Configuration Interface\">LuCI</abbr> "
-#~ "changes have to be confirmed by clicking Changes - Save &amp; Apply "
-#~ "before being applied."
-#~ msgstr ""
-#~ "注意：在<abbr title=\"Lua Configuration Interface\">LuCI</abbr>中，点击 保"
-#~ "存&amp;应用 后设置才会生效。"
-
-#~ msgid ""
-#~ "On the following pages you can adjust all important settings of your "
-#~ "router."
-#~ msgstr "本页可以设置路由器的重要参数。"
-
-#~ msgid "Perform Actions"
-#~ msgstr "执行操作"
-
-#~ msgid ""
-#~ "prevents caching of negative <abbr title=\"Domain Name System\">DNS</"
-#~ "abbr>-replies"
-#~ msgstr "阻止缓存无效的<abbr title=\"Domain Name System\">DNS</abbr>应答"
-
-#~ msgid "Prevents client to client communication"
-#~ msgstr "禁止客户端间的通信"
-
-#~ msgid "Provide (Access Point)"
-#~ msgstr "添加(接入点)"
-
-#~ msgid "Search file..."
-#~ msgstr "查找文件..."
-
-#~ msgid "Server"
-#~ msgstr "服务器"
-
-#~ msgid "TX / RX"
-#~ msgstr "发送 / 接收"
-
-#~ msgid "The <abbr title=\"Lua Configuration Interface\">LuCI</abbr> Team"
-#~ msgstr "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>开发团队"
-
-#~ msgid "The following changes have been comitted"
-#~ msgstr "以下更改已提交"
-
-#~ msgid "The following changes have been applied"
-#~ msgstr "以下更改已生效"
-
-#~ msgid ""
-#~ "This is the administration area of <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr>."
-#~ msgstr ""
-#~ "这是<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的管理页面。"
-
-#~ msgid "transmitted / received"
-#~ msgstr "已传输 / 已接收"
-
-#~ msgid ""
-#~ "When flashing a new firmware with <abbr title=\"Lua Configuration "
-#~ "Interface\">LuCI</abbr> these files will be added to the new firmware "
-#~ "installation."
-#~ msgstr ""
-#~ "当刷写带<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的新固件"
-#~ "时，这些文件将被加入到新的固件中。"
-
-#~ msgid ""
-#~ "With <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> "
-#~ "network members can automatically receive their network settings (<abbr "
-#~ "title=\"Internet Protocol\">IP</abbr>-address, netmask, <abbr title="
-#~ "\"Domain Name System\">DNS</abbr>-server, ...)."
-#~ msgstr ""
-#~ "用户可以通过<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-#~ "abbr>自动接收网络的(<abbr title=\"Internet Protocol\">IP</abbr>地址，子网"
-#~ "掩码，<abbr title=\"Domain Name System\">DNS</abbr>服务器, ...)等配置信"
-#~ "息。"
-
-#~ msgid "Wireless Scan"
-#~ msgstr "搜索无线"
-
-#~ msgid ""
-#~ "You are about to join the wireless network <em><strong>%s</strong></em>. "
-#~ "In order to complete the process, you need to provide some additional "
-#~ "details."
-#~ msgstr ""
-#~ "即将加入无线网络<em><strong>%s</strong></em>，这需要填写一些额外信息。"
-
-#~ msgid ""
-#~ "You can run several wifi networks with one device. Be aware that there "
-#~ "are certain hardware and driverspecific restrictions. Normally you can "
-#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network "
-#~ "simultaneously."
-#~ msgstr ""
-#~ "一台设备可以用虚拟方式同时运行几个无线网络。但注意会有硬件或软件限制。通常"
-#~ "可以运行一个点对点无线网络，或同时运行三个Master模式和一个客户端模式的无线"
-#~ "网络。"
-
-#~ msgid ""
-#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP "
-#~ "support"
-#~ msgstr "需要安装\"ppp-mod-pppoe\"以支持PPPoe，\"pptp\"以支持PPtP"
-
-#~ msgid ""
-#~ "You need to install <a href='%s'><em>wpa-supplicant</em></a> to use WPA!"
-#~ msgstr "需要安装<a href='%s'><em>wpa-supplicant</em></a>以支持WPA加密!"
-
-#~ msgid ""
-#~ "You need to install the <a href='%s'>Broadcom <em>nas</em> supplicant</a> "
-#~ "to use WPA!"
-#~ msgstr ""
-#~ "需要安装<a href='%s'>Broadcom<em>nas</em> supplicant</a>以支持WPA加密!"
-
-#~ msgid "User Interface"
-#~ msgstr "用户界面"
-
-#~ msgid "(hidden)"
-#~ msgstr "(隐藏)"
-
-#~ msgid "(optional)"
-#~ msgstr "(任意)"
-
-#~ msgid "Aliases"
-#~ msgstr "别名"
-
-#~ msgid "First leased address"
-#~ msgstr "起始分配地址"
-
-#~ msgid "Local Network"
-#~ msgstr "本地网络"
-
-#~ msgid "Number of leased addresses"
-#~ msgstr "地址租用数"
-
-#~ msgid "Path"
-#~ msgstr "路径"
-
-#~ msgid "Resolvfile"
-#~ msgstr "解析文件"
-
-#~ msgid "Zone"
-#~ msgstr "区域"
-
-#~ msgid "additional hostfile"
-#~ msgstr "附加的主机文件"
-
-#~ msgid "automatic"
-#~ msgstr "自动"
-
-#~ msgid "automatically reconnect"
-#~ msgstr "自动重连"
-
-#~ msgid "concurrent queries"
-#~ msgstr "并发查询"
-
-#~ msgid "disconnect when idle for"
-#~ msgstr "空闲自动断开"
-
-#~ msgid "don't cache unknown"
-#~ msgstr "不缓存未知数据"
-
-#~ msgid "installed"
-#~ msgstr "已安装"
-
-#~ msgid "manual"
-#~ msgstr "手册"
-
-#~ msgid "not installed"
-#~ msgstr "未安装"
-
-#~ msgid "query port"
-#~ msgstr "查询端口"
-
-#~ msgid "all"
-#~ msgstr "全部"
-
-#~ msgid "Code"
-#~ msgstr "代码"
-
-#~ msgid "Distance"
-#~ msgstr "距离"
-
-#~ msgid "Legend"
-#~ msgstr "图例"
-
-#~ msgid "Library"
-#~ msgstr "Library"
-
-#~ msgid "see '%s' manpage"
-#~ msgstr "详参 &#39;%s&#39; 联机帮助"
-
-#~ msgid "Package Manager"
-#~ msgstr "软件包管理"
-
-#~ msgid "Service"
-#~ msgstr "服务"
-
-#~ msgid "Statistics"
-#~ msgstr "统计信息"
diff --git a/po/zh_CN/commands.po b/po/zh_CN/commands.po
deleted file mode 100644
index 6fbb983..0000000
--- a/po/zh_CN/commands.po
+++ /dev/null
@@ -1,90 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/zh_CN/coovachilli.po b/po/zh_CN/coovachilli.po
deleted file mode 100644
index 7ab0032..0000000
--- a/po/zh_CN/coovachilli.po
+++ /dev/null
@@ -1,26 +0,0 @@
-#  coovachilli.pot
-#  generated from ./applications/luci-coovachilli/luasrc/i18n/coovachilli.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-05 14:32+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CoovaChilli"
-msgstr "CoovaChilli 网页认证"
-
-msgid "Network Configuration"
-msgstr "网络配置"
-
-msgid "RADIUS configuration"
-msgstr "RADIUS配置"
-
-msgid "UAM and MAC Authentication"
-msgstr "UAM和MAC认证"
diff --git a/po/zh_CN/ddns.po b/po/zh_CN/ddns.po
deleted file mode 100644
index d8b0118..0000000
--- a/po/zh_CN/ddns.po
+++ /dev/null
@@ -1,87 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2013-02-27 08:13+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: QQ Group 75543259\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Check for changed IP every"
-msgstr "检查IP变动的时间间隔"
-
-msgid "Check-time unit"
-msgstr "时间单位"
-
-msgid "Custom update-URL"
-msgstr "更新的URL"
-
-msgid "Dynamic DNS"
-msgstr "动态DNS"
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr "动态DNS允许为主机配置一个固定的可访问域名， 但该域名对应的IP可以是动态的."
-
-msgid "Enable"
-msgstr "启用"
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr "强制更新间隔"
-
-msgid "Force-time unit"
-msgstr "强制更新的时间单位"
-
-msgid "Hostname"
-msgstr "主机名"
-
-msgid "Interface"
-msgstr "接口"
-
-msgid "Network"
-msgstr "网络"
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr "密码"
-
-msgid "Service"
-msgstr "服务提供商"
-
-msgid "Source of IP address"
-msgstr "IP地址来源"
-
-msgid "URL"
-msgstr "URL"
-
-msgid "Username"
-msgstr "用户名"
-
-msgid "custom"
-msgstr "自定义"
-
-# Hours
-msgid "h"
-msgstr "时"
-
-msgid "interface"
-msgstr "接口"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "分"
-
-msgid "network"
-msgstr "网络"
diff --git a/po/zh_CN/diag_core.po b/po/zh_CN/diag_core.po
deleted file mode 100644
index e857d3d..0000000
--- a/po/zh_CN/diag_core.po
+++ /dev/null
@@ -1,36 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-05 14:39+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configure Diagnostics"
-msgstr "配置诊断"
-
-msgid "Diagnostics"
-msgstr "诊断"
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr "可用的诊断依赖于设备上已经安装的诊断模块"
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr "下面的条目可以诊断测试系统，为排除故障提供信息"
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr "在这里可以配置网络诊断，例如：扫描网络设备，进行ping测试等。"
-
-#~ msgid "l_d_diag"
-#~ msgstr "l_d诊断"
diff --git a/po/zh_CN/diag_devinfo.po b/po/zh_CN/diag_devinfo.po
deleted file mode 100644
index 7346ef9..0000000
--- a/po/zh_CN/diag_devinfo.po
+++ /dev/null
@@ -1,209 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-28 09:15+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr ""
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/zh_CN/ffwizard.po b/po/zh_CN/ffwizard.po
deleted file mode 100644
index 6217b8f..0000000
--- a/po/zh_CN/ffwizard.po
+++ /dev/null
@@ -1,158 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/zh_CN/firewall.po b/po/zh_CN/firewall.po
deleted file mode 100644
index 0174bf1..0000000
--- a/po/zh_CN/firewall.po
+++ /dev/null
@@ -1,585 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2012-09-29 10:37+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "%s in %s"
-msgstr "%s 位于 %s"
-
-msgid "%s%s with %s"
-msgstr "%s%s 和 %s"
-
-msgid "%s, %s in %s"
-msgstr "%s, %s 位于 %s"
-
-msgid "(Unnamed Entry)"
-msgstr "(未命名条目)"
-
-msgid "(Unnamed Rule)"
-msgstr "(未命名规则)"
-
-msgid "(Unnamed SNAT)"
-msgstr "(未命名SNAT)"
-
-msgid "-- Please choose --"
-msgstr "-- 请选择 --"
-
-msgid "-- custom --"
-msgstr "-- 自定义 --"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr "<var>%d</var> 包.每 <var>%s</var>"
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr "<var>%d</var> 包. 每 <var>%s</var>, 突发 <var>%d</var> 包."
-
-msgid "<var>%s</var> and limit to %s"
-msgstr "<var>%s</var> 并且限制到 %s"
-
-msgid "Action"
-msgstr "动作"
-
-msgid "Add"
-msgstr "添加"
-
-msgid "Add and edit..."
-msgstr "添加并编辑..."
-
-msgid "Advanced Settings"
-msgstr "高级设置"
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr "允许从<em>源区域</em>转发"
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr "允许转发到<em>目标区域</em>"
-
-msgid "Any"
-msgstr "任何"
-
-msgid "Covered networks"
-msgstr "覆盖网络"
-
-msgid "Custom Rules"
-msgstr "自定义规则"
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-"自定义规则允许运行一些防火墙没有包含的功能。这些命令将在每次重启防火墙时，在"
-"默认的规则运行后立即执行。"
-
-msgid "Destination IP address"
-msgstr "目标IP地址"
-
-msgid "Destination address"
-msgstr "目标地址"
-
-msgid "Destination port"
-msgstr "目标端口"
-
-msgid "Destination zone"
-msgstr "目标区域"
-
-msgid "Do not rewrite"
-msgstr "不填写=（所有端口）"
-
-msgid "Drop invalid packets"
-msgstr "丢弃无效数据包"
-
-msgid "Enable"
-msgstr "启用"
-
-msgid "Enable NAT Loopback"
-msgstr "启用NAT环回"
-
-msgid "Enable SYN-flood protection"
-msgstr "启用SYN-flood防御"
-
-msgid "Enable logging on this zone"
-msgstr "在此区域允许进入"
-
-msgid "External IP address"
-msgstr "外部IP地址"
-
-msgid "External port"
-msgstr "外部端口"
-
-msgid "External zone"
-msgstr "外部区域"
-
-msgid "Extra arguments"
-msgstr "附加参数"
-
-msgid "Firewall"
-msgstr "防火墙"
-
-msgid "Firewall - Custom Rules"
-msgstr "防火墙 - 自定义规则"
-
-msgid "Firewall - Port Forwards"
-msgstr "防火墙 - 端口转发"
-
-msgid "Firewall - Traffic Rules"
-msgstr "防火墙 - 通信规则"
-
-msgid "Firewall - Zone Settings"
-msgstr "防火墙-区域设置"
-
-msgid "Force connection tracking"
-msgstr "强制连接追踪"
-
-msgid "Forward"
-msgstr "转发"
-
-msgid "Forward to"
-msgstr "转发到"
-
-msgid "From %s in %s"
-msgstr "来自 %s 位于 %s"
-
-msgid "From %s in %s with source %s"
-msgstr "来自 %s 位于 %s 带源 %s"
-
-msgid "From %s in %s with source %s and %s"
-msgstr "来自 %s 位于 %s 带源 %s 并且 %s"
-
-msgid "General Settings"
-msgstr "基本设置"
-
-msgid "IPv4"
-msgstr "IPv4"
-
-msgid "IPv4 and IPv6"
-msgstr "IPv4 和 IPv6"
-
-msgid "IPv4 only"
-msgstr "仅IPv4"
-
-msgid "IPv6"
-msgstr "IPv6"
-
-msgid "IPv6 only"
-msgstr "仅IPv6"
-
-msgid "Input"
-msgstr "入站数据"
-
-msgid "Inter-Zone Forwarding"
-msgstr "端口触发"
-
-msgid "Internal IP address"
-msgstr "内部IP地址"
-
-msgid "Internal port"
-msgstr "内部端口"
-
-msgid "Internal zone"
-msgstr "内部区域"
-
-msgid "Limit log messages"
-msgstr "限制日志信息"
-
-msgid "MSS clamping"
-msgstr "MSS钳制"
-
-msgid "Masquerading"
-msgstr "IP动态伪装"
-
-msgid "Match"
-msgstr "匹配规则"
-
-msgid "Match ICMP type"
-msgstr "匹配ICMP类型"
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr "需要匹配转发流量到的目标端口或端口范围"
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr "需要匹配入站流量到的目标端口或端口范围"
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr "需要匹配入站流量的源端口或端口范围"
-
-msgid "Name"
-msgstr "名字"
-
-msgid "New SNAT rule"
-msgstr "新建SNAT规则"
-
-msgid "New forward rule"
-msgstr "新建转发规则"
-
-msgid "New input rule"
-msgstr "新建进入规则"
-
-msgid "New port forward"
-msgstr "新建端口转发"
-
-msgid "New source NAT"
-msgstr "新建Source NAT"
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr "需要匹配入站流量的源IP"
-
-msgid "Only match incoming traffic from these MACs."
-msgstr "需要匹配入站流量的源MACs（可以为多个）"
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr "需要匹配入站流量的源IP或IP范围"
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr "需要匹配入站流量的源端口或端口范围"
-
-msgid "Open ports on router"
-msgstr "打开路由器端口"
-
-msgid "Other..."
-msgstr "其它..."
-
-msgid "Output"
-msgstr "出站数据"
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr "传递到iptables的额外参数。小心使用！"
-
-msgid "Port Forwards"
-msgstr "端口转发"
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr "端口转发允许来自Internet的计算机访问私有局域网内的计算机或服务"
-
-msgid "Protocol"
-msgstr "协议"
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr "重定向匹配的入站流量到内部主机的端口"
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr "重定向匹配的入站流量到的内部主机"
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr "要限制IP动态伪装的目标子网"
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr "要限制IP动态伪装的源子网"
-
-msgid "Restrict to address family"
-msgstr "限制地址"
-
-msgid "Rewrite matched traffic to the given address."
-msgstr "将匹配流量的源地址改写成指定地址"
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr "将匹配流量的源端口改写成指定端口。也可以留空，只改写IP地址。"
-
-msgid "Rewrite to source %s"
-msgstr "源地址改写成 %s"
-
-msgid "Rewrite to source %s, %s"
-msgstr "源地址改写成 %s, %s"
-
-msgid "SNAT IP address"
-msgstr "SNAT IP地址"
-
-msgid "SNAT port"
-msgstr "SNAT 端口"
-
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua      #
-# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
-#
-# msgid "Traffic Redirection"
-# msgstr ""
-#
-# msgid ""
-# "Traffic redirection allows you to change the destination address of "
-# "forwarded packets."
-# msgstr ""
-#
-# msgid "Overview"
-# msgstr ""
-#
-# msgid "Name"
-# msgstr ""
-#
-# msgid "Source zone"
-# msgstr ""
-#
-# msgid "Source MAC-address"
-# msgstr ""
-#
-# msgid "Source port"
-# msgstr ""
-#
-# msgid "Protocol"
-# msgstr ""
-#
-msgid "Source IP address"
-msgstr "源IP地址"
-
-msgid "Source MAC address"
-msgstr "源MAC地址"
-
-msgid "Source NAT"
-msgstr "Source NAT"
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-"Source NAT是一种特殊形式的封包伪装，它允许精细的控制传出流量的源IP，例如，将"
-"多个WAN地址映射到内部子网。"
-
-msgid "Source address"
-msgstr "源地址"
-
-msgid "Source port"
-msgstr "源端口"
-
-msgid "Source zone"
-msgstr "源区域"
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr "防火墙把网络接口分为不同的区域进行管理"
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-"以下选项可以控制区域(%s)和其它区域间的转发规则。 <em>目标区域</em>接收"
-"<strong>从%q</strong>转发的流量。<em>源区域</em>匹配从<strong>目标为%q</"
-"strong>的区域的需转发流量。以下规则<em>无法转发</em>,例如：转发lan流量到wan，"
-"但是<em>不允许</em>从wan转发到lan。"
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr "本页面可以更改端口转发的高级设置。大多数情况下，不需要更改这些设置。"
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr "本页面可以更改通信规则的高级设置，比如：需匹配的源主机和目标主机。"
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-"本节定义 %q 的通用属性， <em>入站数据</em> 和 <em>出站数据</em>规则用于设置数"
-"据包“进”和“出”路由器（某个接口）默认的转发原则，<em>转发</em>规则用于特定（一"
-"个或多个）区域的不同子网之间的数据包转发。<em>覆盖网络</em>选择从属于这个区域"
-"的网络。"
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr "到 %s at %s 位于<var>本设备</var>"
-
-msgid "To %s in %s"
-msgstr "到 %s 位于 %s"
-
-msgid "To %s on <var>this device</var>"
-msgstr "到 %s 位于<var>本设备</var>"
-
-msgid "To %s, %s in %s"
-msgstr "到 %s, %s 位于 %s"
-
-msgid "To source IP"
-msgstr "到源IP"
-
-msgid "To source port"
-msgstr "到源端口"
-
-msgid "Traffic Rules"
-msgstr "通信规则"
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-"通信规则定义了不同区域间的流量传送，例如：拒绝一些主机之间的通信、打开到WAN的"
-"端口。"
-
-msgid "Via %s"
-msgstr "通过 %s"
-
-msgid "Via %s at %s"
-msgstr "通过 %s at %s"
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr "你也可以选择“--自定义--”来定义多个协议，在多个协议间需加空格。"
-
-msgid "Zone %q"
-msgstr "区域 %q"
-
-msgid "Zone ⇒ Forwardings"
-msgstr "区域 ⇒ 转发"
-
-msgid "Zones"
-msgstr "区域"
-
-msgid "accept"
-msgstr "接受"
-
-msgid "any"
-msgstr "所有"
-
-msgid "any host"
-msgstr "所有主机"
-
-msgid "any router IP"
-msgstr "所有路由地址"
-
-msgid "any zone"
-msgstr "所有区域"
-
-msgid "don't track"
-msgstr "无动作"
-
-msgid "drop"
-msgstr "丢弃"
-
-msgid "reject"
-msgstr "拒绝"
-
-#~ msgid "Destination"
-#~ msgstr "目标"
-
-#~ msgid "Family"
-#~ msgstr "地址集合"
-
-#~ msgid "Forward to %s in %s"
-#~ msgstr "转发到 %s 位于 %s"
-
-#~ msgid "Forward to %s, %s in %s"
-#~ msgstr "转发到 %s, %s 位于 %s"
-
-#~ msgid "Source"
-#~ msgstr "源"
-
-#~ msgid "Via"
-#~ msgstr "通过"
-
-#~ msgid "Disable"
-#~ msgstr "禁用"
-
-#~ msgid "Do not track forward"
-#~ msgstr "不要追踪转发"
-
-#~ msgid "Do not track input"
-#~ msgstr "不要追踪进入"
-
-#~ msgid "IP"
-#~ msgstr "IP"
-
-#~ msgid "IP range"
-#~ msgstr "IP范围"
-
-#~ msgid "(optional)"
-#~ msgstr "（可选）"
-
-#~ msgid "Intended destination address"
-#~ msgstr "目标地址"
-
-#~ msgid "Internal port (optional)"
-#~ msgstr "内部端口（可选）"
-
-#~ msgid "Advanced Options"
-#~ msgstr "高级选项"
-
-#~ msgid "Advanced Rules"
-#~ msgstr "高级规则"
-
-#~ msgid ""
-#~ "Advanced rules let you customize the firewall to your needs. Only new "
-#~ "connections will be matched. Packets belonging to already open "
-#~ "connections are automatically allowed to pass the firewall."
-#~ msgstr ""
-#~ "高级规则允许按需定制防火墙。此规则只限制新建立的连接，对于已建立链路的数据"
-#~ "包会自动允许通过。"
-
-#~ msgid "Custom Rules (/etc/firewall.user)"
-#~ msgstr "自定义规则(/etc/firewall.user)"
-
-#~ msgid "Device"
-#~ msgstr "设备"
-
-#~ msgid ""
-#~ "For DNAT, match incoming traffic directed at the given destination ip "
-#~ "address. For SNAT rewrite the source address to the given address."
-#~ msgstr ""
-#~ "DNAT：将目标地址转换为指定的IP地址；SNAT：将源地址转换为指定的IP地址。"
-
-#~ msgid ""
-#~ "Match incoming traffic originating from the given source port or port "
-#~ "range on the client host"
-#~ msgstr "在客户端上，比较输入通道与给定的源端口是否一致。"
-
-#~ msgid "Overview"
-#~ msgstr "概览"
-
-#~ msgid "Port forwarding"
-#~ msgstr "端口转发"
-
-#~ msgid ""
-#~ "Port forwarding allows to provide network services in the internal "
-#~ "network to an external network."
-#~ msgstr "端口转发-允许外部网络访问内部网络"
-
-#~ msgid "Redirection type"
-#~ msgstr "重定向类型"
-
-#~ msgid "Redirections"
-#~ msgstr "重定向"
-
-#~ msgid "Rules"
-#~ msgstr "规则"
-
-#~ msgid "Traffic Redirection"
-#~ msgstr "流量重定向"
-
-#~ msgid ""
-#~ "Traffic redirection allows you to change the destination address of "
-#~ "forwarded packets."
-#~ msgstr "流量重定向允许你修改数据包转发地址"
-
-#~ msgid "Zone"
-#~ msgstr "区"
-
-#~ msgid "MASQ"
-#~ msgstr "MASQ"
diff --git a/po/zh_CN/freifunk-policyrouting.po b/po/zh_CN/freifunk-policyrouting.po
deleted file mode 100644
index 3c9a17e..0000000
--- a/po/zh_CN/freifunk-policyrouting.po
+++ /dev/null
@@ -1,39 +0,0 @@
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/zh_CN/freifunk.po b/po/zh_CN/freifunk.po
deleted file mode 100644
index 0850bbe..0000000
--- a/po/zh_CN/freifunk.po
+++ /dev/null
@@ -1,390 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-09-05 14:48+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "BSSID"
-msgstr "BSSID"
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr "基础设置"
-
-msgid "Basic settings"
-msgstr "基础设置"
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr "基础设置不完整，请转到"
-
-msgid "Basic system settings"
-msgstr "基础系统设置"
-
-msgid "Bitrate"
-msgstr "速率"
-
-msgid "Channel"
-msgstr "频道"
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr "检查新的固件版本并自动升级。"
-
-msgid "Client network size"
-msgstr "客户端网络容量"
-
-msgid "Community"
-msgstr "群组"
-
-msgid "Community profile"
-msgstr "群组配置文件"
-
-msgid "Community settings"
-msgstr "群组设置"
-
-msgid "Confirm Upgrade"
-msgstr "确认升级"
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr "国家代码"
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/zh_CN/hd_idle.po b/po/zh_CN/hd_idle.po
deleted file mode 100644
index cb3dccd..0000000
--- a/po/zh_CN/hd_idle.po
+++ /dev/null
@@ -1,48 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 10:33+0200\n"
-"PO-Revision-Date: 2012-09-03 17:57+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: QQ Group:75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Disk"
-msgstr "硬盘"
-
-msgid "Enable"
-msgstr "开启"
-
-msgid "Enable debug"
-msgstr "开启调试"
-
-msgid "Idle-time"
-msgstr "空闲时间"
-
-msgid "Idle-time unit"
-msgstr "空闲时间单位"
-
-msgid "Settings"
-msgstr "设置"
-
-# Hours
-msgid "h"
-msgstr "小时"
-
-msgid "hd-idle"
-msgstr "硬盘休眠"
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr "硬盘休眠是一个让硬盘在空闲一段时间后休眠的工具"
-
-# Minutes (not minimum)
-msgid "min"
-msgstr "分钟"
diff --git a/po/zh_CN/meshwizard.po b/po/zh_CN/meshwizard.po
deleted file mode 100644
index cf9926c..0000000
--- a/po/zh_CN/meshwizard.po
+++ /dev/null
@@ -1,124 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-09-24 18:01+0200\n"
-"PO-Revision-Date: 2012-10-30 04:28+0200\n"
-"Last-Translator: yingrui <easygodg@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr "频道"
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr "选择此项，隔离其他节点或客户端的攻击来保护你的局域网"
-
-msgid "Cleanup config"
-msgstr "清空配置"
-
-msgid "Configure this interface"
-msgstr "配置当前界面"
-
-msgid "DHCP IP range"
-msgstr "DHCP IP 范围"
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr "DHCP将自动给客户端分配IP地址"
-
-msgid "Enable DHCP"
-msgstr "启动DHCP"
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr "总体设置"
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr "如果此项被选中，在设置新选项之前，配置将被清空。"
-
-msgid "Interfaces"
-msgstr "界面"
-
-msgid "Mesh IP address"
-msgstr "Mesh IP 地址"
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr "Mesh 导引"
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/zh_CN/minidlna.po b/po/zh_CN/minidlna.po
deleted file mode 100644
index e699392..0000000
--- a/po/zh_CN/minidlna.po
+++ /dev/null
@@ -1,172 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-11-16 06:26+0200\n"
-"Last-Translator: Rui <shenrui01@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr "高级设置"
-
-msgid "Album art names:"
-msgstr "专辑封面名称："
-
-msgid "Announced model number:"
-msgstr "通告型号："
-
-msgid "Announced serial number:"
-msgstr "通告编号："
-
-msgid "Browse directory"
-msgstr "浏览目录"
-
-msgid "Collecting data..."
-msgstr "收集数据..."
-
-msgid "Database directory:"
-msgstr "数据库目录："
-
-msgid "Enable TIVO:"
-msgstr "启用TIVO："
-
-msgid "Enable inotify:"
-msgstr "启用inotify："
-
-msgid "Enable:"
-msgstr "启用："
-
-msgid "Friendly name:"
-msgstr "友好名称："
-
-msgid "General Settings"
-msgstr "基本设置"
-
-msgid "Interfaces:"
-msgstr "接口："
-
-msgid "Log directory:"
-msgstr "日志目录："
-
-msgid "Media directories:"
-msgstr "媒体目录："
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr "MiniDLNA是DLNA / UPnP-AV媒体服务器。"
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr "miniDLNA守护程序将在其XML描述中向客户端通告型号。"
-
-msgid "Music"
-msgstr "音乐"
-
-msgid "Network interfaces to serve."
-msgstr "服务的网络接口。"
-
-msgid "Notify interval in seconds."
-msgstr "通知的时间间隔，以秒为单位。"
-
-msgid "Notify interval:"
-msgstr "通知的时间间隔："
-
-msgid "Pictures"
-msgstr "图片"
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-
-msgid "Port:"
-msgstr "端口："
-
-msgid "Presentation URL:"
-msgstr "服务网址"
-
-msgid "Root container:"
-msgstr "根目录："
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr "miniDLNA守护程序将在其XML描述中向客户端通告编号。"
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr "设置自定义名称。"
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr "设置miniDLNA缓存目录"
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr "设置miniDLNA日志目录"
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr "设定启用inotify监控，自动发现新的文件。"
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr "为HMO TiVo启用JPG和MP3流媒体支持。"
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-"设定严格遵守DLNA标准。这将允许服务器端降小大尺寸JPEG图像，在（至少）索尼DLNA"
-"的产品这可能会降低JPEG服务性能。"
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-"设置要扫描的目录。如果你想限制特定内容类型的目录，你可以在前面加上类型（用于"
-"音频'A'，'V'视频，'P'图片），其次是用逗号分隔的目录（如media_dir = A，/ mnt/"
-"媒体/音乐）。可以指定多个目录。"
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr "指定MiniSSDPd socket的路径。"
-
-msgid "Standard container"
-msgstr "基本目录"
-
-msgid "Strict to DLNA standard:"
-msgstr "严格的DLNA标准："
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr "miniDLNA服务已启用，提供 %d 音频, %d 视频 和 %d 图片."
-
-msgid "The miniDLNA service is not running."
-msgstr "miniDLNA服务未启用"
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr "这是一个文件名列表，为搜索专辑封面。"
-
-msgid "Video"
-msgstr "视频"
-
-msgid "miniDLNA"
-msgstr "miniDLNA"
-
-msgid "miniDLNA Status"
-msgstr "miniDLNA 状态"
-
-msgid "miniSSDP socket:"
-msgstr "miniSSDP socket："
diff --git a/po/zh_CN/mmc_over_gpio.po b/po/zh_CN/mmc_over_gpio.po
deleted file mode 100644
index 1fd8862..0000000
--- a/po/zh_CN/mmc_over_gpio.po
+++ /dev/null
@@ -1,41 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-06-28 08:52+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
diff --git a/po/zh_CN/multiwan.po b/po/zh_CN/multiwan.po
deleted file mode 100644
index 64cbf4c..0000000
--- a/po/zh_CN/multiwan.po
+++ /dev/null
@@ -1,118 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2013-04-03 09:00+0200\n"
-"Last-Translator: lyricz <flyhigher@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr "自动"
-
-msgid "Collecting data..."
-msgstr "正在收集数据…"
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr "DNS服务器"
-
-msgid "Default Route"
-msgstr "缺省路由"
-
-msgid "Destination Address"
-msgstr "目的地址"
-
-msgid "Disable"
-msgstr "禁用"
-
-msgid "Enable"
-msgstr "启用"
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr "健康状况监测ICMP主机"
-
-msgid "Health Monitor ICMP Timeout"
-msgstr "健康状况监测ICMP主机超时"
-
-msgid "Health Monitor Interval"
-msgstr "健康状况监测间隔"
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/zh_CN/ntpc.po b/po/zh_CN/ntpc.po
deleted file mode 100644
index 0821c3f..0000000
--- a/po/zh_CN/ntpc.po
+++ /dev/null
@@ -1,53 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCi Chinese Translation\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-14 13:24+0200\n"
-"PO-Revision-Date: 2012-11-15 21:39+0200\n"
-"Last-Translator: Rui <shenrui01@gmail.com>\n"
-"Language-Team: QQ Group 75543259\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Clock Adjustment"
-msgstr "时钟校对"
-
-msgid "Count of time measurements"
-msgstr "单位时间数"
-
-msgid "Current system time"
-msgstr "当前系统时间"
-
-msgid "General"
-msgstr "基本设置"
-
-msgid "Hostname"
-msgstr "主机名"
-
-msgid "Offset frequency"
-msgstr "偏移量"
-
-msgid "Port"
-msgstr "端口"
-
-msgid "Synchronizes the system time"
-msgstr "同步系统时间"
-
-msgid "Time Server"
-msgstr "时间服务器"
-
-msgid "Time Servers"
-msgstr "时间服务器"
-
-msgid "Time Synchronisation"
-msgstr "时间同步"
-
-msgid "Update interval (in seconds)"
-msgstr "更新间隔(秒)"
-
-msgid "empty = infinite"
-msgstr "空值为无限长度"
diff --git a/po/zh_CN/olsr.po b/po/zh_CN/olsr.po
deleted file mode 100644
index 89e0baa..0000000
--- a/po/zh_CN/olsr.po
+++ /dev/null
@@ -1,575 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is "
-"\"16\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/zh_CN/openvpn.po b/po/zh_CN/openvpn.po
deleted file mode 100644
index 290c656..0000000
--- a/po/zh_CN/openvpn.po
+++ /dev/null
@@ -1,551 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: 2011-11-03 09:03+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "%s"
-msgstr "%s"
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr "'net30', 'p2p', 或 '子网'"
-
-msgid "Accept options pushed from server"
-msgstr "接受从服务器发送过来的选项"
-
-msgid "Add"
-msgstr "添加"
-
-msgid "Add route after establishing connection"
-msgstr "建立连接后添加路由"
-
-msgid "Additional authentication over TLS"
-msgstr "TLS以外的验证"
-
-msgid "Allow client-to-client traffic"
-msgstr "允许客户端到客户端的通信"
-
-msgid "Allow multiple clients with same certificate"
-msgstr "允许多用户共用同一证书"
-
-msgid "Allow only one session"
-msgstr "只允许一个会话"
-
-msgid "Allow remote to change its IP or port"
-msgstr "允许远程修改ip和端口"
-
-msgid "Allowed maximum of connected clients"
-msgstr "允许最大已连接客户端数"
-
-msgid "Allowed maximum of internal"
-msgstr "允许最大内部连接"
-
-msgid "Allowed maximum of new connections"
-msgstr "允许最大新建连接数"
-
-msgid "Append log to file"
-msgstr "添加日志至文件"
-
-msgid "Authenticate using username/password"
-msgstr "以用户名/密码的方式进行验证"
-
-msgid "Automatically redirect default route"
-msgstr "自动重定向至默认路由"
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr "Openvpn已配置实例及其当前状态列表"
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr "TUN/TAP关闭前关闭命令行及脚本"
-
-msgid "Certificate authority"
-msgstr "认证授权"
-
-msgid "Change process priority"
-msgstr "改变进程优先级"
-
-msgid "Change to directory before initialization"
-msgstr "初始化前改变根目录"
-
-msgid "Check peer certificate against a CRL"
-msgstr "验证客户端证书以确保其是否过期"
-
-msgid "Chroot to directory after initialization"
-msgstr "初始化后改变根目录"
-
-msgid "Client is disabled"
-msgstr "客户端已被禁止"
-
-msgid "Configuration category"
-msgstr "配置分类"
-
-msgid "Configure client mode"
-msgstr "配置客户端模式"
-
-msgid "Configure server bridge"
-msgstr "配置服务器桥接"
-
-msgid "Configure server mode"
-msgstr "配置服务器模式"
-
-msgid "Connect through Socks5 proxy"
-msgstr "通过Sock5代理连接"
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr "通过HTTP代理连接到远程主机"
-
-msgid "Connection retry interval"
-msgstr "连接重试时间间隔"
-
-msgid "Cryptography"
-msgstr "加密"
-
-msgid "Daemonize after initialization"
-msgstr "初始化后进入后台运行"
-
-msgid "Delay n seconds after connection"
-msgstr "连接后延迟时间(秒)"
-
-msgid "Delay tun/tap open and up script execution"
-msgstr "延迟tun/tap的打开并加速脚本执行"
-
-msgid "Diffie Hellman parameters"
-msgstr "Diffie–Hellman/DH密钥交换 参数"
-
-msgid "Directory for custom client config files"
-msgstr "自定义客户端配置文件的目录"
-
-msgid "Disable Paging"
-msgstr "禁止分页"
-
-msgid "Disable cipher initialisation vector"
-msgstr "关闭加密的初始化向量"
-
-msgid "Disable options consistency check"
-msgstr "禁止选项一致性检查"
-
-msgid "Disable replay protection"
-msgstr "关闭重播保护"
-
-msgid "Do not bind to local address and port"
-msgstr "不绑定本地地址和端口"
-
-msgid "Don't actually execute ifconfig"
-msgstr "不实际执行ifconfig命令"
-
-msgid "Don't add routes automatically"
-msgstr "不自动添加路由"
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr "不缓存--askpass 或--auth-user-pass passwords"
-
-msgid "Don't inherit global push options"
-msgstr "不继承全局主动发送选项"
-
-msgid "Don't log timestamps"
-msgstr "不记录时间戳"
-
-msgid "Don't re-read key on restart"
-msgstr "服务重启时不重读密钥值"
-
-msgid "Don't require client certificate"
-msgstr "不需要客户的证书"
-
-msgid "Don't use adaptive lzo compression"
-msgstr "不用自适应的lzo压缩"
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr "ifconfig不一致时不警告"
-
-msgid "Echo parameters to log"
-msgstr "把参数写入日志"
-
-msgid "Empirically measure MTU"
-msgstr "以历史值估算MTU值"
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr "打开OpenSSL硬件加密引擎"
-
-msgid "Enable Path MTU discovery"
-msgstr "启用路径MTU发现"
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr "允许静态密钥加密模式"
-
-msgid "Enable TLS and assume client role"
-msgstr "允许TLS并伪装为客户端"
-
-msgid "Enable TLS and assume server role"
-msgstr "允许TLS并伪装为服务器"
-
-msgid "Enable internal datagram fragmentation"
-msgstr "允许内部数据报分片"
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr "在<em>IP</em> <em>port</em>上启用可管理接口"
-
-msgid "Enabled"
-msgstr "启用"
-
-msgid "Encryption cipher for packets"
-msgstr "加密数据包"
-
-msgid "Execute shell cmd after routes are added"
-msgstr "添加路由后执行shell命令"
-
-msgid "Execute shell command on remote ip change"
-msgstr "当远程ip改变时执行shell命令"
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr "TLS验证失败后退出"
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr "后台运行前从控制的tty中获取PEM密码"
-
-msgid "HMAC authentication for packets"
-msgstr "利用HMAC水印算法校验数据包"
-
-msgid "Handling of authentication failures"
-msgstr "处理验证失败"
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr "如果主机名解析错误，重试"
-
-msgid "Instance \"%s\""
-msgstr "实例 \"%s\""
-
-msgid "Invalid"
-msgstr "无效"
-
-msgid "Keep local IP address on restart"
-msgstr "服务重启时保持本地IP地址"
-
-msgid "Keep remote IP address on restart"
-msgstr "服务重启时保持远程IP地址"
-
-msgid "Keep tun/tap device open on restart"
-msgstr "服务重启时自动打开 tun/tap 设备"
-
-msgid "Key transition window"
-msgstr "密钥传输滑动窗口"
-
-msgid "Limit repeated log messages"
-msgstr "限制重复性的日志消息"
-
-msgid "Local certificate"
-msgstr "本地证书"
-
-msgid "Local host name or ip address"
-msgstr "本地主机名或ip地址"
-
-msgid "Local private key"
-msgstr "本地私人密钥"
-
-msgid "Major mode"
-msgstr "主要模式"
-
-msgid "Make tun device IPv6 capable"
-msgstr "使 tun 设备兼容IPv6"
-
-msgid "Maximum number of queued TCP output packets"
-msgstr "TCP队列中输出包的最大数量"
-
-msgid "Networking"
-msgstr "网络"
-
-msgid "Number of allocated broadcast buffers"
-msgstr "已分配的广播缓冲区数量"
-
-msgid "Number of lines for log file history"
-msgstr "历史日志文件的行数"
-
-msgid "Only accept connections from given X509 name"
-msgstr "只接收已给定的X509名称的连接"
-
-msgid "Only process ping timeouts if routes exist"
-msgstr "当且仅当路由存在时处理ping超时"
-
-msgid "OpenVPN"
-msgstr "OpenVPN"
-
-msgid "OpenVPN instances"
-msgstr "OpenVPN 实例"
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr "优化 TUN/TAP/UDP 写入"
-
-msgid "Output to syslog and do not daemonize"
-msgstr "显式输出到syslog"
-
-msgid "Overview"
-msgstr "概览"
-
-msgid "PKCS#12 file containing keys"
-msgstr "PKCS#12文件包含的密钥"
-
-msgid "Pass environment variables to script"
-msgstr "传递环境变量至脚本"
-
-msgid "Persist replay-protection state"
-msgstr "保存重播保护的状态"
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr "持久/非持久ifconfig池"
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr "每n秒ping一次远程 TCP/UDP 端口"
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr "端口"
-
-msgid "Protocol"
-msgstr "协议"
-
-msgid "Proxy timeout in seconds"
-msgstr "代理超时，单位秒"
-
-msgid "Push an ifconfig option to remote"
-msgstr "主动向远程发送ifconfig选项"
-
-msgid "Push options to peer"
-msgstr "主动向端点发送选项"
-
-msgid "Query management channel for private key"
-msgstr "为私人密钥查询管理通道"
-
-msgid "Randomly choose remote server"
-msgstr "随机选择远程服务器"
-
-msgid "Refuse connection if no custom client config"
-msgstr "拒接没有自定义客户端配置的连接"
-
-msgid "Remap SIGUSR1 signals"
-msgstr "重映射SIGUSR1信号"
-
-msgid "Remote host name or ip address"
-msgstr "远程主机名或ip地址"
-
-msgid "Remote ping timeout"
-msgstr "远程ping超时"
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr "传输若干字节后重新验证数据通道密钥"
-
-msgid "Renegotiate data chan. key after packets"
-msgstr "传输若干数据包后重新验证数据通道密钥"
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr "传输若干秒后重新验证数据通道密钥"
-
-msgid "Replay protection sliding window size"
-msgstr "重播保护的滑动窗口大小"
-
-msgid "Require explicit designation on certificate"
-msgstr "证书需要显式指定"
-
-msgid "Require explicit key usage on certificate"
-msgstr "证书需要明确的密钥"
-
-msgid "Restart after remote ping timeout"
-msgstr "远程ping超时后重启"
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr "TLS控制通道超时后重新发送"
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr "无限重试直至代理正确"
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr "无限重试直至Socks代理正确"
-
-msgid "Route subnet to client"
-msgstr "路由子网至客户端"
-
-msgid "Run as an inetd or xinetd server"
-msgstr "以inetd或xinetd服务器的方式运行"
-
-msgid "Run script cmd on client connection"
-msgstr "当客户端连接时在命令行下允许脚本"
-
-msgid "Run script cmd on client disconnection"
-msgstr "当客户端断开时在命令行下允许脚本"
-
-msgid "Run up/down scripts for all restarts"
-msgstr "每次重启都执行启动/关闭脚本"
-
-msgid "Send notification to peer on disconnect"
-msgstr "断开连接时向客户端发送通知"
-
-msgid "Service"
-msgstr "服务"
-
-msgid "Set GID to group"
-msgstr "为群组设置GID值"
-
-msgid "Set TCP/UDP MTU"
-msgstr "设置TCP/UDP的MTU值"
-
-msgid "Set UID to user"
-msgstr "为用户设置UID值"
-
-msgid "Set aside a pool of subnets"
-msgstr "设置为拒绝子网线程池模式"
-
-msgid "Set extended HTTP proxy options"
-msgstr "设置HTTP扩展代理选项"
-
-msgid "Set output verbosity"
-msgstr "设置输出冗余级别"
-
-msgid "Set size of real and virtual address hash tables"
-msgstr "设置实际和虚拟地址的哈希表大小"
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr "设置TCP/UDP接收缓冲区大小"
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr "设置TCP/UDP发送缓冲区大小"
-
-msgid "Set tun/tap TX queue length"
-msgstr "设置tun/tap发送队列长度"
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr "设置tun/tap设备的MTU值"
-
-msgid "Set tun/tap device overhead"
-msgstr "设置tun/tap设备的开销"
-
-msgid "Set upper bound on TCP MSS"
-msgstr "设置TCP MSS的上限"
-
-msgid "Shaping for peer bandwidth"
-msgstr "改变结点带宽"
-
-msgid "Shell cmd to execute after tun device open"
-msgstr "tun设备打开后运行shell命令行"
-
-msgid "Shell cmd to run after tun device close"
-msgstr "tun设备关闭后运行shell命令行e"
-
-msgid "Shell command to verify X509 name"
-msgstr "运行shell命令以验证X509名称"
-
-msgid "Silence the output of replay warnings"
-msgstr "以静音的方式发出重播警告"
-
-msgid "Size of cipher key"
-msgstr "密钥大小"
-
-msgid "Specify a default gateway for routes"
-msgstr "指定路由默认网关"
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr "以休眠的状态打开OpenVPN"
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr "已运行的"
-
-msgid "Status file format version"
-msgstr "显式文件格式版本的状态"
-
-msgid "Switch to advanced configuration »"
-msgstr "高级配置 »"
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr "TCP/UDP 端口 # 同时针对本地和远程"
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr "TCP/UDP 端口 # 本地 (默认 1194)"
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr "TCP/UDP 端口 # 远程 (默认 1194)"
-
-msgid "TLS cipher"
-msgstr "TLS加密"
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr "TOS 穿透 (仅限IPv4)"
-
-msgid "Temporary directory for client-connect return file"
-msgstr "客户端连接返回文件的临时目录"
-
-msgid "Timeframe for key exchange"
-msgstr "密钥交换时间表"
-
-msgid "Type of used device"
-msgstr "使用设备类型"
-
-msgid "Use fast LZO compression"
-msgstr "使用快速LZO压缩"
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr "利用个人地址代替/30 子网"
-
-msgid "Use protocol"
-msgstr "采用协议"
-
-msgid "Use tun/tap device node"
-msgstr "使用 tun/tap 设备节点"
-
-msgid "Use username as common name"
-msgstr "把用户名作为通用名称"
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr "保存日志至文件"
-
-msgid "Write process ID to file"
-msgstr "记录进程ID至文件"
-
-msgid "Write status to file every n seconds"
-msgstr "每n秒后写状态值至文件"
-
-msgid "no"
-msgstr "否"
-
-msgid "tun/tap device"
-msgstr "tun/tap 设备"
-
-msgid "tun/tap inactivity timeout"
-msgstr "tun/tap 休眠超时"
-
-msgid "yes (%i)"
-msgstr "是 (%i)"
-
-msgid "« Switch to basic configuration"
-msgstr "« 基本配置"
diff --git a/po/zh_CN/p2pblock.po b/po/zh_CN/p2pblock.po
deleted file mode 100644
index 97959ae..0000000
--- a/po/zh_CN/p2pblock.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-06-17 19:11+0200\n"
-"PO-Revision-Date: 2012-06-21 18:37+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/zh_CN/p910nd.po b/po/zh_CN/p910nd.po
deleted file mode 100644
index 748aca1..0000000
--- a/po/zh_CN/p910nd.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:35+0200\n"
-"PO-Revision-Date: 2012-11-22 18:17+0200\n"
-"Last-Translator: Rui <shenrui01@gmail.com>\n"
-"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Bidirectional mode"
-msgstr "双向模式"
-
-msgid "Device"
-msgstr "设备"
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr "首先你必须安装支持USB打印机的驱动(kmod-usb-printer)或者并行端口驱动(kmod-lp)"
-
-msgid "Port"
-msgstr "端口"
-
-msgid "Settings"
-msgstr "设置"
-
-msgid "TCP listener port."
-msgstr "监听端口"
-
-msgid "enable"
-msgstr "启用"
-
-msgid "p910nd - Printer server"
-msgstr "打印服务器"
-
-#~ msgid "p910nd listens on port 910+N. E.g. 9100 for the first printer."
-#~ msgstr "p910nd 的监听端口是910+N，举例：9100用于监听第一台打印机"
diff --git a/po/zh_CN/pbx-voicemail.po b/po/zh_CN/pbx-voicemail.po
deleted file mode 100644
index bf633a6..0000000
--- a/po/zh_CN/pbx-voicemail.po
+++ /dev/null
@@ -1,87 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/zh_CN/pbx.po b/po/zh_CN/pbx.po
deleted file mode 100644
index cde9320..0000000
--- a/po/zh_CN/pbx.po
+++ /dev/null
@@ -1,448 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/zh_CN/polipo.po b/po/zh_CN/polipo.po
deleted file mode 100644
index fd7caea..0000000
--- a/po/zh_CN/polipo.po
+++ /dev/null
@@ -1,205 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-21 18:35+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/zh_CN/qos.po b/po/zh_CN/qos.po
deleted file mode 100644
index 0b8e715..0000000
--- a/po/zh_CN/qos.po
+++ /dev/null
@@ -1,103 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: LuCi Chinese Translation\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-03-25 22:10+0100\n"
-"PO-Revision-Date: 2012-09-03 18:00+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: QQ Group 75543259\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Calculate overhead"
-msgstr "计算开销"
-
-msgid "Classification Rules"
-msgstr "分类规则"
-
-msgid "Classification group"
-msgstr "分类组"
-
-msgid "Destination host"
-msgstr "目的主机"
-
-msgid "Downlink"
-msgstr "下行"
-
-msgid "Download speed (kbit/s)"
-msgstr "下载速度 (kbit/s)"
-
-msgid "Enable"
-msgstr "开启"
-
-msgid "Half-duplex"
-msgstr "半双工"
-
-msgid "Interfaces"
-msgstr "接口"
-
-msgid "Internet Connection"
-msgstr "Internet连接"
-
-msgid "Number of bytes"
-msgstr "字节数"
-
-msgid "Ports"
-msgstr "端口"
-
-msgid "Protocol"
-msgstr "协议"
-
-msgid "QoS"
-msgstr "QoS"
-
-msgid "Quality of Service"
-msgstr "QOS服务"
-
-msgid "Service"
-msgstr "服务"
-
-msgid "Source host"
-msgstr "源主机"
-
-msgid "Target"
-msgstr "目标"
-
-msgid "Uplink"
-msgstr "上行"
-
-msgid "Upload speed (kbit/s)"
-msgstr "上传速度 (kbit/s)"
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr "根据网络地址、端口或服务，给流量数据包排序。"
-
-msgid "all"
-msgstr "全部"
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr "默认"
-
-msgid "express"
-msgstr "高"
-
-msgid "low"
-msgstr "低"
-
-msgid "normal"
-msgstr "普通"
-
-msgid "priority"
-msgstr "最高"
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/zh_CN/radvd.po b/po/zh_CN/radvd.po
deleted file mode 100644
index f35268f..0000000
--- a/po/zh_CN/radvd.po
+++ /dev/null
@@ -1,391 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: \n"
-"PO-Revision-Date: 2012-02-06 09:31+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.4\n"
-
-msgid "6to4 interface"
-msgstr "6to4 接口"
-
-msgid "Address"
-msgstr "地址"
-
-msgid "Addresses"
-msgstr "地址"
-
-msgid "Advanced"
-msgstr "进阶选项"
-
-msgid "Advertise Home Agent flag"
-msgstr "广播本地中继标识"
-
-msgid "Advertise router address"
-msgstr "广播路由地址"
-
-msgid "Advertised Domain Suffixes"
-msgstr "区域广播后缀"
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr "IPv6 Recursive DNS服务器(RDNSS)地址。若为空，则为当前IPv6地址"
-
-msgid "Advertised IPv6 prefixes"
-msgstr "IPV6广播前缀群"
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr "客户端"
-
-msgid "Configuration flag"
-msgstr "设置标识"
-
-msgid "Current hop limit"
-msgstr "当前跳数限制"
-
-msgid "DNSSL"
-msgstr "DNS搜索列表"
-
-msgid "DNSSL Configuration"
-msgstr "DNS搜索列表设置"
-
-msgid "Default lifetime"
-msgstr "默认期限"
-
-msgid "Default preference"
-msgstr "默认优先级"
-
-msgid "Enable"
-msgstr "启用"
-
-msgid "Enable advertisements"
-msgstr "启用广播"
-
-msgid "Enables router advertisements and solicitations"
-msgstr "激活路由广播和请求"
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr "启用自动配置，不包括地址信息(RFC2462)"
-
-msgid "General"
-msgstr "概况"
-
-msgid "Home Agent information"
-msgstr "本地中继信息"
-
-msgid "Home Agent lifetime"
-msgstr "本地中继有效期"
-
-msgid "Home Agent preference"
-msgstr "本地中继优先权"
-
-msgid "Include Home Agent Information in the RA"
-msgstr "RA报文中包含本地中继信息"
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr "RA报文中包含移动IPV6广播间隔设置"
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr "RA报文中包含源地址"
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr "接口"
-
-msgid "Interface Configuration"
-msgstr "接口设置"
-
-msgid "Interface required"
-msgstr "接口必要项"
-
-msgid "Interfaces"
-msgstr "接口"
-
-msgid "Lifetime"
-msgstr "有效期"
-
-msgid "Link MTU"
-msgstr "连接MTU"
-
-msgid "Managed flag"
-msgstr "M标识"
-
-msgid "Max. interval"
-msgstr "最大间隔"
-
-msgid "Maximum advertisement interval"
-msgstr "最大广播间隔"
-
-msgid "Minimum advertisement delay"
-msgstr "最小广播延时"
-
-msgid "Minimum advertisement interval"
-msgstr "最小广播间隔"
-
-msgid "Mobile IPv6"
-msgstr "移动IPV6"
-
-msgid "Mobile IPv6 interval option"
-msgstr "移动IPV6间隔选项"
-
-msgid "Mobile IPv6 router registration"
-msgstr "移动IPV6路由注册"
-
-msgid "Multicast"
-msgstr "组播传输"
-
-msgid "On-link"
-msgstr "已连接的"
-
-msgid "On-link determination"
-msgstr "已连接的目标"
-
-msgid "Preference"
-msgstr "优先权"
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr "前缀"
-
-msgid "Prefix Configuration"
-msgstr "前缀设置"
-
-msgid "Prefixes"
-msgstr "前缀群"
-
-msgid "RDNSS"
-msgstr "邻居发现服务器"
-
-msgid "RDNSS Configuration"
-msgstr "邻居发现服务器设置"
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr "RADVD－DNS搜索列表"
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr "RADVD－前缀"
-
-msgid "Radvd - RDNSS"
-msgstr "RADVD－邻居发现服务器"
-
-msgid "Radvd - Route"
-msgstr "RADVD－路由"
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr "RADVD是一个IPV6路由广播软件，按照RFC4861监听路由请求和发送路由广播。"
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr "限制特定会话，留空则使用组播"
-
-msgid "Retransmit timer"
-msgstr "中继转发计时器"
-
-msgid "Route Configuration"
-msgstr "路由设置"
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr "源地址"
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr "说明这个物理接口连接到哪个网络"
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr "后缀"
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr "单播"
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr "有效期"
-
-msgid "default"
-msgstr "默认"
-
-msgid "high"
-msgstr "高"
-
-msgid "low"
-msgstr "低"
-
-msgid "medium"
-msgstr "中等"
-
-msgid "no"
-msgstr "否"
-
-msgid "yes"
-msgstr "是"
-
-#~ msgid "Advertised IPv6 prefix"
-#~ msgstr "IPV6广播前缀"
-
-#~ msgid ""
-#~ "Advertised IPv6 prefix. If empty, the current interface prefix is used"
-#~ msgstr "IPV6广播前缀。若为空，则当前接口前缀已被使用。"
-
-#~ msgid "Open"
-#~ msgstr "打开"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the DNSSL entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr "指定DNSSL解析域名的最长时间，0则为无限长"
-
-#~ msgid ""
-#~ "Specifies the maximum duration how long the RDNSS entries are used for "
-#~ "name resolution. Use 0 to specify an infinite lifetime"
-#~ msgstr "指定RDNSS解析域名的最长时间，0则为无限长"
diff --git a/po/zh_CN/rrdtool.po b/po/zh_CN/rrdtool.po
deleted file mode 100644
index 98df446..0000000
--- a/po/zh_CN/rrdtool.po
+++ /dev/null
@@ -1,359 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-21 18:28+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/zh_CN/samba.po b/po/zh_CN/samba.po
deleted file mode 100644
index 4ff671b..0000000
--- a/po/zh_CN/samba.po
+++ /dev/null
@@ -1,83 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-06-21 18:31+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Allow guests"
-msgstr "允许匿名用户"
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr "允许系统用户通过网络共享访问他们的主目录"
-
-msgid "Allowed users"
-msgstr "允许用户"
-
-msgid "Create mask"
-msgstr "创建权限"
-
-msgid "Description"
-msgstr "描述"
-
-msgid "Directory mask"
-msgstr "目录权限"
-
-msgid "Edit Template"
-msgstr "编辑模板"
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr "编辑用来生成samba设置的模板"
-
-msgid "General Settings"
-msgstr "基本设置"
-
-msgid "Hostname"
-msgstr "主机名"
-
-msgid "Mask for new directories"
-msgstr "新目录权限"
-
-msgid "Mask for new files"
-msgstr "新文件权限"
-
-msgid "Name"
-msgstr "共享名"
-
-msgid "Network Shares"
-msgstr "网络共享"
-
-msgid "Path"
-msgstr "目录"
-
-msgid "Read-only"
-msgstr "只读"
-
-msgid "Share home-directories"
-msgstr "共享主目录"
-
-msgid "Shared Directories"
-msgstr "共享目录"
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-"创建samba设置的 \"/etc/samba/smb.conf.template\" 文件的内容。被通道符|包围的"
-"值可在基本设置中进行配置"
-
-msgid "Workgroup"
-msgstr "工作组"
-
-#~ msgid "Physical Path"
-#~ msgstr "物理路径"
diff --git a/po/zh_CN/splash.po b/po/zh_CN/splash.po
deleted file mode 100644
index 2bd4db7..0000000
--- a/po/zh_CN/splash.po
+++ /dev/null
@@ -1,321 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-06-28 08:58+0200\n"
-"PO-Revision-Date: 2012-09-24 18:37+0200\n"
-"Last-Translator: shanliren <shanliren.net@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Accept"
-msgstr "接收"
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr "活动的客户端"
-
-msgid "Allowed hosts/subnets"
-msgstr "允许的 主机/掩码"
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-"只有当 上传和下载的限制都设置的时候对客户端的带宽限制才会生效。在这里使用0 可"
-"以完全禁用此限制。白名单客户端不受限制。"
-
-# Something wwrong?
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr "成为这个社区的一个活跃成员并且运营你自己的节点以帮助别人。"
-
-msgid "Blacklist"
-msgstr "黑名单"
-
-msgid "Blocked"
-msgstr "锁定"
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr "清理时间"
-
-msgid "Client-Splash"
-msgstr "客户端弹窗"
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr "Client-Splash是无线MESH网络的一个热点认证系统"
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr "客户端下载速度限制为此值(kbyte/s)"
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr "已接受Splash的客户端允许使用这个网络N小时"
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr "客户端上传速度限制为此值(kbyte/s)"
-
-msgid "Contact"
-msgstr "联系"
-
-msgid "Decline"
-msgstr "下降"
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr "捐助我们一些钱以帮助我们维护这个项目。"
-
-msgid "Download limit"
-msgstr "下载限制"
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr "防火墙区域"
-
-msgid "General"
-msgstr "概述"
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr "主机名"
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr "列在这里的主机和网络都排除在Splashing之外，例如:一直被允许访问。"
-
-msgid "IP Address"
-msgstr "IP地址"
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr "如果你操作你自有的wifi设备，使用与我们不同的频道"
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr "如果你经常使用这个网络，我们需要你的支持"
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr "在这个接口上拦截客户端通信流量"
-
-msgid "Interfaces"
-msgstr "接口"
-
-msgid "Interfaces that are used for Splash."
-msgstr "Splash使用的接口"
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
-
-#~ msgid "By accepting these rules you can use this network for"
-#~ msgstr "接受这些条款以便使用这个网络"
-
-#~ msgid "Edit Splash text"
-#~ msgstr "编辑Splash文本"
diff --git a/po/zh_CN/statistics.po b/po/zh_CN/statistics.po
deleted file mode 100644
index dfc1abc..0000000
--- a/po/zh_CN/statistics.po
+++ /dev/null
@@ -1,601 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-06-21 18:23+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
-
-#~ msgid "group name"
-#~ msgstr "群名称"
diff --git a/po/zh_CN/tinyproxy.po b/po/zh_CN/tinyproxy.po
deleted file mode 100644
index af7d365..0000000
--- a/po/zh_CN/tinyproxy.po
+++ /dev/null
@@ -1,262 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-21 18:03+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-"<em>通过代理</em>允许给定的对象经过指定的上行代理的路由请求。<em>拒绝代理</"
-"em> 禁用对象的任何上行代理。"
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr "授权客户端"
-
-msgid "Allowed connect ports"
-msgstr "允许的连接端口"
-
-msgid "Bind address"
-msgstr "绑定地址"
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-"默认情况下，使用基本的POSIX表达式作为滤规则。启用这个以使用正规表达式代替之。"
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr "默认情况下，过滤规则是不区分大小写的。启用它则转为区分大小写。"
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr "默认情况下，过滤器只匹配域名。启用它以匹配URL。"
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-"默认情况下，过滤规则将以黑名单形式匹配。启用它将仅允许过滤规则里的URL或域名。"
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr "可以是IP地址或者范围，也可以是域名或者以\".\"代表任意主机"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr "连接超时时间"
-
-msgid "Default deny"
-msgstr "默认拒绝"
-
-msgid "Enable Tinyproxy server"
-msgstr "启用Tinyproxy"
-
-msgid "Error page"
-msgstr "错误页面"
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr "正则表达式过滤器"
-
-msgid "Filter by URLs"
-msgstr "基于URL的过滤器"
-
-msgid "Filter case-sensitive"
-msgstr "过滤器大小写敏感"
-
-msgid "Filter file"
-msgstr "过滤器文件"
-
-msgid "Filtering and ACLs"
-msgstr "过滤规则和访问控制列表"
-
-msgid "General settings"
-msgstr "基本设置"
-
-msgid "Group"
-msgstr "运行组"
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr "HTTP出错页面HTML模板"
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr "允许访问代理服务器的IP或IP段列表"
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr "允许CONNECT方法连接的端口列表,0代表所有端口。"
-
-msgid "Listen address"
-msgstr "服务地址"
-
-msgid "Listen port"
-msgstr "服务端口"
-
-msgid "Log file"
-msgstr "日志文件"
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr "记录等级"
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr "最大客户端数"
-
-msgid "Max. requests per server"
-msgstr "单进程最大请求数"
-
-msgid "Max. spare servers"
-msgstr "最多备用服务器"
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr "允许同时连接的最大客户端数量"
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr "单个进程允许的最多请求数，超过这个值，进程将重启。0表示不限制。"
-
-msgid "Maximum number of prepared idle processes"
-msgstr "备用进程数的最大值"
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr "最少备用服务器"
-
-msgid "Minimum number of prepared idle processes"
-msgstr "备用进程数的最小值"
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr "启动Tinyproxy时开启的进程数"
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr "用于过滤器的文本，包含URL或者域名，每行一条。"
-
-msgid "Policy"
-msgstr "策略"
-
-msgid "Privacy settings"
-msgstr "策略设置"
-
-msgid "Reject access"
-msgstr "拒绝访问"
-
-msgid "Server Settings"
-msgstr "服务器设置"
-
-msgid "Server limits"
-msgstr "服务器限制"
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr "指定服务器向外转发请求时所使用的地址"
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr "指定服务器接收代理请求所使用的地址"
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr "指定Tinyproxy进程所属组"
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr "指定上级代理. 格式 <code>IP地址:端口</code>"
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr "指定Tinyproxy进程所属用户"
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr "统计页面"
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr "目标主机"
-
-msgid "Tinyproxy"
-msgstr "Tinyproxy"
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr "Tinyproxy是一个轻量级无缓存机制的高速HTTP(S)代理服务器"
-
-msgid "Upstream Proxies"
-msgstr "上级代理"
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr "使用系统日志服务"
-
-msgid "User"
-msgstr "运行用户"
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr "通过代理"
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr "将日志写入系统日志以代替指定的日志文件"
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/zh_CN/transmission.po b/po/zh_CN/transmission.po
deleted file mode 100644
index 2537a5b..0000000
--- a/po/zh_CN/transmission.po
+++ /dev/null
@@ -1,280 +0,0 @@
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr "磁盘预分配"
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/zh_CN/upnp.po b/po/zh_CN/upnp.po
deleted file mode 100644
index 71c5b14..0000000
--- a/po/zh_CN/upnp.po
+++ /dev/null
@@ -1,149 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-10 03:40+0200\n"
-"PO-Revision-Date: 2012-09-03 18:02+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr "指定外部端口的ACL可能会被重定向至某些内部地址及端口"
-
-msgid "Action"
-msgstr "动作"
-
-msgid "Active UPnP Redirects"
-msgstr "活动的UPnP重定向"
-
-msgid "Advanced Settings"
-msgstr "高级设置"
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr "允许添加只转发给请求的IP地址(当启用时，UPnP的客户可以只转发到其IP)"
-
-msgid "Announced model number"
-msgstr "公布的型号"
-
-msgid "Announced serial number"
-msgstr "公布的序列号"
-
-msgid "Clean rules interval"
-msgstr "定时自动清除无效规则"
-
-msgid "Clean rules threshold"
-msgstr "启动时清除端口转发"
-
-msgid "Client Address"
-msgstr "客户端地址"
-
-msgid "Client Port"
-msgstr "客户端端口"
-
-msgid "Collecting data..."
-msgstr "正在收集数据"
-
-msgid "Comment"
-msgstr "备注"
-
-msgid "Delete Redirect"
-msgstr "删除转发规则"
-
-msgid "Device UUID"
-msgstr "设备UUID"
-
-msgid "Downlink"
-msgstr "下行速率"
-
-msgid "Enable NAT-PMP functionality"
-msgstr "启用NAT-PMP功能"
-
-msgid "Enable UPnP functionality"
-msgstr "启用UPnP功能"
-
-msgid "Enable additional logging"
-msgstr "启用额外的日志记录"
-
-msgid "Enable secure mode"
-msgstr "启用安全模式"
-
-msgid "External Port"
-msgstr "外部端口"
-
-msgid "External ports"
-msgstr "外部端口"
-
-msgid "General Settings"
-msgstr "一般设置"
-
-msgid "Internal addresses"
-msgstr "内部地址"
-
-msgid "Internal ports"
-msgstr "内部端口"
-
-msgid "MiniUPnP ACLs"
-msgstr "MiniUPnP的ACL"
-
-msgid "MiniUPnP settings"
-msgstr "MiniUPnP设置"
-
-msgid "Notify interval"
-msgstr "警报间隔"
-
-msgid "Port"
-msgstr "端口"
-
-msgid "Presentation URL"
-msgstr "显示URL"
-
-msgid "Protocol"
-msgstr "协议"
-
-msgid "Puts extra debugging information into the system log"
-msgstr "提取额外的调试信息至系统日志"
-
-msgid "Report system instead of daemon uptime"
-msgstr "用系统运行时间代替进程运行时间"
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr "启动UPnP与NAT-PMP服务"
-
-msgid "There are no active redirects."
-msgstr "没有活动的重定向"
-
-msgid "UPNP"
-msgstr "UPNP"
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr "UPnP允许局域网内客户端自动设置路由上的端口转发。"
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr "UPnP允许局域网内客户端自动设置路由上的端口转发。"
-
-msgid "UPnP lease file"
-msgstr "UPnP租约文件"
-
-msgid "Universal Plug & Play"
-msgstr "通用即插即用(UPnP)"
-
-msgid "Uplink"
-msgstr "上行速率"
-
-msgid "Value in KByte/s, informational only"
-msgstr "值为KByte/s，仅供参考"
-
-msgid "enable"
-msgstr "启用"
diff --git a/po/zh_CN/ushare.po b/po/zh_CN/ushare.po
deleted file mode 100644
index f426526..0000000
--- a/po/zh_CN/ushare.po
+++ /dev/null
@@ -1,52 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-05-19 19:36+0200\n"
-"PO-Revision-Date: 2012-09-18 16:26+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: QQ Group 75543259\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Content directories"
-msgstr "目录"
-
-msgid "Disable telnet console"
-msgstr "关闭telnet管理"
-
-msgid "Disable webinterface"
-msgstr "关闭界面管理"
-
-msgid "Enable"
-msgstr "启用"
-
-msgid "Interface"
-msgstr "网络接口"
-
-msgid "Options"
-msgstr "选项"
-
-msgid "Servername"
-msgstr "服务器名"
-
-msgid "Settings"
-msgstr "设置"
-
-msgid "Username"
-msgstr "用户名"
-
-msgid "uShare"
-msgstr "UPNP流媒体服务"
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
-"uShare是一个UPnP(TM) A/V和DLNA媒体服务器。可以将多媒体文件共享到支持UPnP的设"
-"备上。"
diff --git a/po/zh_CN/uvc_streamer.po b/po/zh_CN/uvc_streamer.po
deleted file mode 100644
index 3e4bb0a..0000000
--- a/po/zh_CN/uvc_streamer.po
+++ /dev/null
@@ -1,42 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-18 16:32+0200\n"
-"Last-Translator: nKsyn <e.nksyn@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr "FPS"
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr "分辨率"
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr "设置"
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr "网络相机流"
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
-"配置兼容的网络相机。用浏览器访问<a href=\"http://%s:%i/\">http://%s:%i/</a>"
diff --git a/po/zh_CN/vnstat.po b/po/zh_CN/vnstat.po
deleted file mode 100644
index 85f911b..0000000
--- a/po/zh_CN/vnstat.po
+++ /dev/null
@@ -1,61 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-21 17:55+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: German\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/zh_CN/voice_core.po b/po/zh_CN/voice_core.po
deleted file mode 100644
index eeeeaab..0000000
--- a/po/zh_CN/voice_core.po
+++ /dev/null
@@ -1,18 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-21 17:53+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/zh_CN/voice_diag.po b/po/zh_CN/voice_diag.po
deleted file mode 100644
index 2fc053e..0000000
--- a/po/zh_CN/voice_diag.po
+++ /dev/null
@@ -1,25 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-06-21 17:53+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/zh_CN/watchcat.po b/po/zh_CN/watchcat.po
deleted file mode 100644
index 0482e95..0000000
--- a/po/zh_CN/watchcat.po
+++ /dev/null
@@ -1,63 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"PO-Revision-Date: 2012-09-24 18:18+0200\n"
-"Last-Translator: shanliren <shanliren.net@gmail.com>\n"
-"Language-Team: none\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Forced reboot delay"
-msgstr "强制重启延时"
-
-msgid "Host address to ping"
-msgstr "ping主机地址"
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-"检测网络连接的频率。默认单位为秒，你可以使用'm'作为后缀表示分钟，‘h’表示小"
-"时‘d’表示天。"
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-"在周期模式，此处定义了重启的周期。在联网模式，这个表示没有网络连接情况下到执"
-"行重启的最长时间间隔。默认单位为秒，你可以使用'm'作为后缀表示分钟，‘h’表示小"
-"时‘d’表示天。"
-
-msgid "Operating mode"
-msgstr "操作模式"
-
-msgid "Period"
-msgstr "周期"
-
-msgid "Ping host"
-msgstr "ping主机"
-
-msgid "Ping period"
-msgstr "ping周期"
-
-msgid "Watchcat"
-msgstr "WatchCat"
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr "WatchCat允许设置周期性的重启 和/或者 当网络连接断开达规定时间。"
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
-"当重启系统的时候WatchCat将会触发一个软重启，在这里输入一个非0的值，如果软重启"
-"失败将会触发一个延迟的硬重启。输入秒数启用，输入0禁止功能。"
diff --git a/po/zh_CN/wol.po b/po/zh_CN/wol.po
deleted file mode 100644
index c44f088..0000000
--- a/po/zh_CN/wol.po
+++ /dev/null
@@ -1,49 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-19 00:29+0200\n"
-"PO-Revision-Date: 2012-06-21 17:52+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Broadcast on all interfaces"
-msgstr "向所有接口广播"
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr "选择要唤醒的主机或者输入自定义mac地址"
-
-msgid "Host to wake up"
-msgstr "选择要唤醒的主机"
-
-msgid "Network interface to use"
-msgstr "选择使用的网络接口"
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr "有时只有一个工具生效。如果其中一个失效，请尝试另一个"
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr "限定网络唤醒数据包将被发送到的接口"
-
-msgid "Starting WoL utility:"
-msgstr "正在启动网络唤醒工具"
-
-msgid "Wake on LAN"
-msgstr "网络唤醒"
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr "网络唤醒提供了从远程启动本地网络内计算机的机制。"
-
-msgid "Wake up host"
-msgstr "唤醒主机"
-
-msgid "WoL program"
-msgstr "网络唤醒程序"
diff --git a/po/zh_CN/wshaper.po b/po/zh_CN/wshaper.po
deleted file mode 100644
index f874d31..0000000
--- a/po/zh_CN/wshaper.po
+++ /dev/null
@@ -1,55 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-11-03 08:25+0200\n"
-"PO-Revision-Date: 2012-06-21 17:51+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Pootle 2.0.6\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
diff --git a/po/zh_TW/ahcp.po b/po/zh_TW/ahcp.po
deleted file mode 100644
index f8e8fcc..0000000
--- a/po/zh_TW/ahcp.po
+++ /dev/null
@@ -1,105 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "AHCP Server"
-msgstr ""
-
-msgid ""
-"AHCP is an autoconfiguration protocol for IPv6 and dual-stack IPv6/IPv4 "
-"networks designed to be used in place of router discovery and DHCP on "
-"networks where it is difficult or impossible to configure a server within "
-"every link-layer broadcast domain, for example mobile ad-hoc networks."
-msgstr ""
-
-msgid "Active AHCP Leases"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Age"
-msgstr ""
-
-msgid "Announced DNS servers"
-msgstr ""
-
-msgid "Announced NTP servers"
-msgstr ""
-
-msgid "Announced prefixes"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Forwarder"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Lease directory"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "Operation mode"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Served interfaces"
-msgstr ""
-
-msgid "Server"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 NTP servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 name servers"
-msgstr ""
-
-msgid "Specifies the announced IPv4 and IPv6 network prefixes in CIDR notation"
-msgstr ""
-
-msgid "The AHCP Service is not running."
-msgstr ""
-
-msgid "The AHCP Service is running with ID %s."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "Unique ID file"
-msgstr ""
diff --git a/po/zh_TW/asterisk.po b/po/zh_TW/asterisk.po
deleted file mode 100644
index e69de29..0000000
diff --git a/po/zh_TW/base.po b/po/zh_TW/base.po
deleted file mode 100644
index b5efb46..0000000
--- a/po/zh_TW/base.po
+++ /dev/null
@@ -1,2735 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "(%d minute window, %d second interval)"
-msgstr ""
-
-msgid "(%s available)"
-msgstr ""
-
-msgid "(empty)"
-msgstr ""
-
-msgid "(no interfaces attached)"
-msgstr ""
-
-msgid "-- Additional Field --"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "1 Minute Load:"
-msgstr ""
-
-msgid "15 Minute Load:"
-msgstr ""
-
-msgid "40MHz 2nd channel above"
-msgstr ""
-
-msgid "40MHz 2nd channel below"
-msgstr ""
-
-msgid "5 Minute Load:"
-msgstr ""
-
-msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> query port"
-msgstr ""
-
-msgid "<abbr title=\"Domain Name System\">DNS</abbr> server port"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Domain Name System\">DNS</abbr> servers will be queried in the "
-"order of the resolvfile"
-msgstr ""
-
-msgid "<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"
-msgstr ""
-
-msgid ""
-"<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address or Network "
-"(CIDR)"
-msgstr ""
-
-msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Configuration"
-msgstr ""
-
-msgid "<abbr title=\"Light Emitting Diode\">LED</abbr> Name"
-msgstr ""
-
-msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Dynamic Host Configuration "
-"Protocol\">DHCP</abbr> leases"
-msgstr ""
-
-msgid ""
-"<abbr title=\"maximal\">Max.</abbr> <abbr title=\"Extension Mechanisms for "
-"Domain Name System\">EDNS0</abbr> packet size"
-msgstr ""
-
-msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
-msgstr ""
-
-msgid "<abbr title='Pairwise: %s / Group: %s'>%s - %s</abbr>"
-msgstr ""
-
-msgid "APN"
-msgstr ""
-
-msgid "AR Support"
-msgstr ""
-
-msgid "ARP retry threshold"
-msgstr ""
-
-msgid "ATM Bridges"
-msgstr ""
-
-msgid "ATM Virtual Channel Identifier (VCI)"
-msgstr ""
-
-msgid "ATM Virtual Path Identifier (VPI)"
-msgstr ""
-
-msgid ""
-"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
-"Linux network interfaces which can be used in conjunction with DHCP or PPP "
-"to dial into the provider network."
-msgstr ""
-
-msgid "ATM device number"
-msgstr ""
-
-msgid "Accept router advertisements"
-msgstr ""
-
-msgid "Access Concentrator"
-msgstr ""
-
-msgid "Access Point"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Actions"
-msgstr ""
-
-msgid "Activate this network"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Routes"
-msgstr ""
-
-msgid "Active <abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Routes"
-msgstr ""
-
-msgid "Active Connections"
-msgstr ""
-
-msgid "Active DHCP Leases"
-msgstr ""
-
-msgid "Active DHCPv6 Leases"
-msgstr ""
-
-msgid "Ad-Hoc"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add local domain suffix to names served from hosts files"
-msgstr ""
-
-msgid "Add new interface..."
-msgstr ""
-
-msgid "Additional Hosts files"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Address to access local relay bridge"
-msgstr ""
-
-msgid "Administration"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Advertise IPv6 on network"
-msgstr ""
-
-msgid "Advertised network ID"
-msgstr ""
-
-msgid "Alert"
-msgstr ""
-
-msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
-msgstr ""
-
-msgid "Allow all except listed"
-msgstr ""
-
-msgid "Allow listed only"
-msgstr ""
-
-msgid "Allow localhost"
-msgstr ""
-
-msgid "Allow remote hosts to connect to local SSH forwarded ports"
-msgstr ""
-
-msgid "Allow root logins with password"
-msgstr ""
-
-msgid "Allow the <em>root</em> user to login with password"
-msgstr ""
-
-msgid ""
-"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
-msgstr ""
-
-msgid "Allowed range is 1 to 65535"
-msgstr ""
-
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
-msgstr ""
-
-msgid "An additional network will be created if you leave this unchecked."
-msgstr ""
-
-msgid "Antenna 1"
-msgstr ""
-
-msgid "Antenna 2"
-msgstr ""
-
-msgid "Antenna Configuration"
-msgstr ""
-
-msgid "Any zone"
-msgstr ""
-
-msgid "Apply"
-msgstr ""
-
-msgid "Applying changes"
-msgstr ""
-
-msgid "Assign interfaces..."
-msgstr ""
-
-msgid "Associated Stations"
-msgstr ""
-
-msgid "Atheros 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Authentication"
-msgstr ""
-
-msgid "Authoritative"
-msgstr ""
-
-msgid "Authorization Required"
-msgstr ""
-
-msgid "Auto Refresh"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid "Available packages"
-msgstr ""
-
-msgid "Average:"
-msgstr ""
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Back"
-msgstr ""
-
-msgid "Back to Overview"
-msgstr ""
-
-msgid "Back to configuration"
-msgstr ""
-
-msgid "Back to overview"
-msgstr ""
-
-msgid "Back to scan results"
-msgstr ""
-
-msgid "Background Scan"
-msgstr ""
-
-msgid "Backup / Flash Firmware"
-msgstr ""
-
-msgid "Backup / Restore"
-msgstr ""
-
-msgid "Backup file list"
-msgstr ""
-
-msgid "Bad address specified!"
-msgstr ""
-
-msgid ""
-"Below is the determined list of files to backup. It consists of changed "
-"configuration files marked by opkg, essential base files and the user "
-"defined backup patterns."
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Bogus NX Domain Override"
-msgstr ""
-
-msgid "Bridge"
-msgstr ""
-
-msgid "Bridge interfaces"
-msgstr ""
-
-msgid "Bridge unit number"
-msgstr ""
-
-msgid "Bring up on boot"
-msgstr ""
-
-msgid "Broadcom 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Broadcom BCM%04x 802.11 Wireless Controller"
-msgstr ""
-
-msgid "Buffered"
-msgstr ""
-
-msgid "Buttons"
-msgstr ""
-
-msgid "CPU"
-msgstr ""
-
-msgid "CPU usage (%)"
-msgstr ""
-
-msgid "Cached"
-msgstr ""
-
-msgid "Cancel"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "Changes"
-msgstr ""
-
-msgid "Changes applied."
-msgstr ""
-
-msgid "Changes the administrator password for accessing the device"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check"
-msgstr ""
-
-msgid "Checksum"
-msgstr ""
-
-msgid ""
-"Choose the firewall zone you want to assign to this interface. Select "
-"<em>unspecified</em> to remove the interface from the associated zone or "
-"fill out the <em>create</em> field to define a new zone and attach the "
-"interface to it."
-msgstr ""
-
-msgid ""
-"Choose the network(s) you want to attach to this wireless interface or fill "
-"out the <em>create</em> field to define a new network."
-msgstr ""
-
-msgid "Cipher"
-msgstr ""
-
-msgid ""
-"Click \"Generate archive\" to download a tar archive of the current "
-"configuration files. To reset the firmware to its initial state, click "
-"\"Perform reset\" (only possible with squashfs images)."
-msgstr ""
-
-msgid "Client"
-msgstr ""
-
-msgid "Client ID to send when requesting DHCP"
-msgstr ""
-
-msgid ""
-"Close inactive connection after the given amount of seconds, use 0 to "
-"persist connection"
-msgstr ""
-
-msgid "Close list..."
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Common Configuration"
-msgstr ""
-
-msgid "Compression"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Configuration applied."
-msgstr ""
-
-msgid "Configuration files will be kept."
-msgstr ""
-
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr ""
-
-msgid "Confirmation"
-msgstr ""
-
-msgid "Connect"
-msgstr ""
-
-msgid "Connected"
-msgstr ""
-
-msgid "Connection Limit"
-msgstr ""
-
-msgid "Connections"
-msgstr ""
-
-msgid "Country"
-msgstr ""
-
-msgid "Country Code"
-msgstr ""
-
-msgid "Cover the following interface"
-msgstr ""
-
-msgid "Cover the following interfaces"
-msgstr ""
-
-msgid "Create / Assign firewall-zone"
-msgstr ""
-
-msgid "Create Interface"
-msgstr ""
-
-msgid "Create a bridge over multiple interfaces"
-msgstr ""
-
-msgid "Critical"
-msgstr ""
-
-msgid "Cron Log Level"
-msgstr ""
-
-msgid "Custom Interface"
-msgstr ""
-
-msgid ""
-"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
-"\">LED</abbr>s if possible."
-msgstr ""
-
-msgid "DHCP Leases"
-msgstr ""
-
-msgid "DHCP Server"
-msgstr ""
-
-msgid "DHCP and DNS"
-msgstr ""
-
-msgid "DHCP client"
-msgstr ""
-
-msgid "DHCP-Options"
-msgstr ""
-
-msgid "DHCPv6 Leases"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS forwardings"
-msgstr ""
-
-msgid "DUID"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Default %d"
-msgstr ""
-
-msgid "Default gateway"
-msgstr ""
-
-msgid "Default state"
-msgstr ""
-
-msgid "Define a name for this network."
-msgstr ""
-
-msgid ""
-"Define additional DHCP options, for example "
-"\"<code>6,192.168.2.1,192.168.2.2</code>\" which advertises different DNS "
-"servers to clients."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Delete this interface"
-msgstr ""
-
-msgid "Delete this network"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Design"
-msgstr ""
-
-msgid "Destination"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Device Configuration"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid "Directory"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid ""
-"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
-"this interface."
-msgstr ""
-
-msgid "Disable DNS setup"
-msgstr ""
-
-msgid "Disable HW-Beacon timer"
-msgstr ""
-
-msgid "Disabled"
-msgstr ""
-
-msgid "Discard upstream RFC1918 responses"
-msgstr ""
-
-msgid "Displaying only packages containing"
-msgstr ""
-
-msgid "Distance Optimization"
-msgstr ""
-
-msgid "Distance to farthest network member in meters."
-msgstr ""
-
-msgid "Diversity"
-msgstr ""
-
-msgid ""
-"Dnsmasq is a combined <abbr title=\"Dynamic Host Configuration Protocol"
-"\">DHCP</abbr>-Server and <abbr title=\"Domain Name System\">DNS</abbr>-"
-"Forwarder for <abbr title=\"Network Address Translation\">NAT</abbr> "
-"firewalls"
-msgstr ""
-
-msgid "Do not cache negative replies, e.g. for not existing domains"
-msgstr ""
-
-msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr ""
-
-msgid "Do not forward reverse lookups for local networks"
-msgstr ""
-
-msgid "Do not send probe responses"
-msgstr ""
-
-msgid "Domain required"
-msgstr ""
-
-msgid "Domain whitelist"
-msgstr ""
-
-msgid ""
-"Don't forward <abbr title=\"Domain Name System\">DNS</abbr>-Requests without "
-"<abbr title=\"Domain Name System\">DNS</abbr>-Name"
-msgstr ""
-
-msgid "Download and install package"
-msgstr ""
-
-msgid "Download backup"
-msgstr ""
-
-msgid "Dropbear Instance"
-msgstr ""
-
-msgid ""
-"Dropbear offers <abbr title=\"Secure Shell\">SSH</abbr> network shell access "
-"and an integrated <abbr title=\"Secure Copy\">SCP</abbr> server"
-msgstr ""
-
-msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
-msgstr ""
-
-msgid "Dynamic tunnel"
-msgstr ""
-
-msgid ""
-"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
-"having static leases will be served."
-msgstr ""
-
-msgid "EAP-Method"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Edit this interface"
-msgstr ""
-
-msgid "Edit this network"
-msgstr ""
-
-msgid "Emergency"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgstr ""
-
-msgid "Enable HE.net dynamic endpoint update"
-msgstr ""
-
-msgid "Enable IPv6 negotiation on the PPP link"
-msgstr ""
-
-msgid "Enable Jumbo Frame passthrough"
-msgstr ""
-
-msgid "Enable NTP client"
-msgstr ""
-
-msgid "Enable TFTP server"
-msgstr ""
-
-msgid "Enable VLAN functionality"
-msgstr ""
-
-msgid "Enable learning and aging"
-msgstr ""
-
-msgid "Enable this mount"
-msgstr ""
-
-msgid "Enable this swap"
-msgstr ""
-
-msgid "Enable/Disable"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Enables the Spanning Tree Protocol on this bridge"
-msgstr ""
-
-msgid "Encapsulation mode"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Erasing..."
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Ethernet Adapter"
-msgstr ""
-
-msgid "Ethernet Switch"
-msgstr ""
-
-msgid "Expand hosts"
-msgstr ""
-
-msgid "Expires"
-msgstr ""
-
-msgid ""
-"Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."
-msgstr ""
-
-msgid "External system log server"
-msgstr ""
-
-msgid "External system log server port"
-msgstr ""
-
-msgid "Fast Frames"
-msgstr ""
-
-msgid "File"
-msgstr ""
-
-msgid "Filename of the boot image advertised to clients"
-msgstr ""
-
-msgid "Filesystem"
-msgstr ""
-
-msgid "Filter"
-msgstr ""
-
-msgid "Filter private"
-msgstr ""
-
-msgid "Filter useless"
-msgstr ""
-
-msgid "Find and join network"
-msgstr ""
-
-msgid "Find package"
-msgstr ""
-
-msgid "Finish"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall Settings"
-msgstr ""
-
-msgid "Firewall Status"
-msgstr ""
-
-msgid "Firmware Version"
-msgstr ""
-
-msgid "Fixed source port for outbound DNS queries"
-msgstr ""
-
-msgid "Flags"
-msgstr ""
-
-msgid "Flash Firmware"
-msgstr ""
-
-msgid "Flash image..."
-msgstr ""
-
-msgid "Flash new firmware image"
-msgstr ""
-
-msgid "Flash operations"
-msgstr ""
-
-msgid "Flashing..."
-msgstr ""
-
-msgid "Force"
-msgstr ""
-
-msgid "Force 40MHz mode"
-msgstr ""
-
-msgid "Force CCMP (AES)"
-msgstr ""
-
-msgid "Force DHCP on this network even if another server is detected."
-msgstr ""
-
-msgid "Force TKIP"
-msgstr ""
-
-msgid "Force TKIP and CCMP (AES)"
-msgstr ""
-
-msgid "Forward DHCP traffic"
-msgstr ""
-
-msgid "Forward broadcast traffic"
-msgstr ""
-
-msgid "Forwarding mode"
-msgstr ""
-
-msgid "Fragmentation Threshold"
-msgstr ""
-
-msgid "Frame Bursting"
-msgstr ""
-
-msgid "Free"
-msgstr ""
-
-msgid "Free space"
-msgstr ""
-
-msgid "Frequency Hopping"
-msgstr ""
-
-msgid "GHz"
-msgstr ""
-
-msgid "GPRS only"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Gateway ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General Setup"
-msgstr ""
-
-msgid "Generate archive"
-msgstr ""
-
-msgid "Generic 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Given password confirmation did not match, password not changed!"
-msgstr ""
-
-msgid "Go to password configuration..."
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "HE.net password"
-msgstr ""
-
-msgid "HE.net user ID"
-msgstr ""
-
-msgid "HT capabilities"
-msgstr ""
-
-msgid "HT mode"
-msgstr ""
-
-msgid "Handler"
-msgstr ""
-
-msgid "Hang Up"
-msgstr ""
-
-msgid ""
-"Here you can configure the basic aspects of your device like its hostname or "
-"the timezone."
-msgstr ""
-
-msgid ""
-"Here you can paste public SSH-Keys (one per line) for SSH public-key "
-"authentication."
-msgstr ""
-
-msgid "Hermes 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"
-msgstr ""
-
-msgid "Host entries"
-msgstr ""
-
-msgid "Host expiry timeout"
-msgstr ""
-
-msgid "Host-<abbr title=\"Internet Protocol Address\">IP</abbr> or Network"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Hostname to send when requesting DHCP"
-msgstr ""
-
-msgid "Hostnames"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 Firewall"
-msgstr ""
-
-msgid "IPv4 WAN Status"
-msgstr ""
-
-msgid "IPv4 address"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid "IPv4 gateway"
-msgstr ""
-
-msgid "IPv4 netmask"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv4 prefix length"
-msgstr ""
-
-msgid "IPv4-Address"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 Firewall"
-msgstr ""
-
-msgid "IPv6 WAN Status"
-msgstr ""
-
-msgid "IPv6 address"
-msgstr ""
-
-msgid "IPv6 gateway"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "IPv6 prefix"
-msgstr ""
-
-msgid "IPv6 prefix length"
-msgstr ""
-
-msgid "IPv6-Address"
-msgstr ""
-
-msgid "IPv6-in-IPv4 (RFC4213)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6rd)"
-msgstr ""
-
-msgid "IPv6-over-IPv4 (6to4)"
-msgstr ""
-
-msgid "Identity"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by its UUID instead of a fixed device node"
-msgstr ""
-
-msgid ""
-"If specified, mount the device by the partition label instead of a fixed "
-"device node"
-msgstr ""
-
-msgid "If unchecked, no default route is configured"
-msgstr ""
-
-msgid "If unchecked, the advertised DNS server addresses are ignored"
-msgstr ""
-
-msgid ""
-"If your physical memory is insufficient unused data can be temporarily "
-"swapped to a swap-device resulting in a higher amount of usable <abbr title="
-"\"Random Access Memory\">RAM</abbr>. Be aware that swapping data is a very "
-"slow process as the swap-device cannot be accessed with the high datarates "
-"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgstr ""
-
-msgid "Ignore Hosts files"
-msgstr ""
-
-msgid "Ignore interface"
-msgstr ""
-
-msgid "Ignore resolve file"
-msgstr ""
-
-msgid "Image"
-msgstr ""
-
-msgid "In"
-msgstr ""
-
-msgid "Inactivity timeout"
-msgstr ""
-
-msgid "Inbound:"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "Initscript"
-msgstr ""
-
-msgid "Initscripts"
-msgstr ""
-
-msgid "Install"
-msgstr ""
-
-msgid "Install package %q"
-msgstr ""
-
-msgid "Install protocol extensions..."
-msgstr ""
-
-msgid "Installed packages"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface Overview"
-msgstr ""
-
-msgid "Interface is reconnecting..."
-msgstr ""
-
-msgid "Interface is shutting down..."
-msgstr ""
-
-msgid "Interface not present or not connected yet."
-msgstr ""
-
-msgid "Interface reconnected"
-msgstr ""
-
-msgid "Interface shut down"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internal Server Error"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
-msgstr ""
-
-msgid "Invalid VLAN ID given! Only unique IDs are allowed"
-msgstr ""
-
-msgid "Invalid username and/or password! Please try again."
-msgstr ""
-
-msgid ""
-"It appears that you try to flash an image that does not fit into the flash "
-"memory, please verify the image file!"
-msgstr ""
-
-msgid "Java Script required!"
-msgstr ""
-
-msgid "Join Network"
-msgstr ""
-
-msgid "Join Network: Settings"
-msgstr ""
-
-msgid "Join Network: Wireless Scan"
-msgstr ""
-
-msgid "Keep settings"
-msgstr ""
-
-msgid "Kernel Log"
-msgstr ""
-
-msgid "Kernel Version"
-msgstr ""
-
-msgid "Key"
-msgstr ""
-
-msgid "Key #%d"
-msgstr ""
-
-msgid "Kill"
-msgstr ""
-
-msgid "L2TP"
-msgstr ""
-
-msgid "L2TP Server"
-msgstr ""
-
-msgid "LCP echo failure threshold"
-msgstr ""
-
-msgid "LCP echo interval"
-msgstr ""
-
-msgid "LLC"
-msgstr ""
-
-msgid "Label"
-msgstr ""
-
-msgid "Language"
-msgstr ""
-
-msgid "Language and Style"
-msgstr ""
-
-msgid "Lease validity time"
-msgstr ""
-
-msgid "Leasefile"
-msgstr ""
-
-msgid "Leasetime"
-msgstr ""
-
-msgid "Leasetime remaining"
-msgstr ""
-
-msgid "Leave empty to autodetect"
-msgstr ""
-
-msgid "Leave empty to use the current WAN address"
-msgstr ""
-
-msgid "Legend:"
-msgstr ""
-
-msgid "Limit"
-msgstr ""
-
-msgid "Link On"
-msgstr ""
-
-msgid ""
-"List of <abbr title=\"Domain Name System\">DNS</abbr> servers to forward "
-"requests to"
-msgstr ""
-
-msgid "List of domains to allow RFC1918 responses for"
-msgstr ""
-
-msgid "List of hosts that supply bogus NX domain results"
-msgstr ""
-
-msgid "Listen only on the given interface or, if unspecified, on all"
-msgstr ""
-
-msgid "Listening port for inbound DNS queries"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Load Average"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Local IPv4 address"
-msgstr ""
-
-msgid "Local IPv6 address"
-msgstr ""
-
-msgid "Local Startup"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Local domain"
-msgstr ""
-
-msgid ""
-"Local domain specification. Names matching this domain are never forwared "
-"and resolved from DHCP or hosts files only"
-msgstr ""
-
-msgid "Local domain suffix appended to DHCP names and hosts file entries"
-msgstr ""
-
-msgid "Local server"
-msgstr ""
-
-msgid ""
-"Localise hostname depending on the requesting subnet if multiple IPs are "
-"available"
-msgstr ""
-
-msgid "Localise queries"
-msgstr ""
-
-msgid "Locked to channel %d used by %s"
-msgstr ""
-
-msgid "Log output level"
-msgstr ""
-
-msgid "Log queries"
-msgstr ""
-
-msgid "Logging"
-msgstr ""
-
-msgid "Login"
-msgstr ""
-
-msgid "Logout"
-msgstr ""
-
-msgid "Lowest leased address as offset from the network address."
-msgstr ""
-
-msgid "MAC-Address"
-msgstr ""
-
-msgid "MAC-Address Filter"
-msgstr ""
-
-msgid "MAC-Filter"
-msgstr ""
-
-msgid "MAC-List"
-msgstr ""
-
-msgid "MB/s"
-msgstr ""
-
-msgid "MHz"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Maximum Rate"
-msgstr ""
-
-msgid "Maximum allowed number of active DHCP leases"
-msgstr ""
-
-msgid "Maximum allowed number of concurrent DNS queries"
-msgstr ""
-
-msgid "Maximum allowed size of EDNS.0 UDP packets"
-msgstr ""
-
-msgid "Maximum amount of seconds to wait for the modem to become ready"
-msgstr ""
-
-msgid "Maximum hold time"
-msgstr ""
-
-msgid "Maximum number of leased addresses."
-msgstr ""
-
-msgid "Mbit/s"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory usage (%)"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Minimum Rate"
-msgstr ""
-
-msgid "Minimum hold time"
-msgstr ""
-
-msgid "Missing protocol extension for proto %q"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Modem device"
-msgstr ""
-
-msgid "Modem init timeout"
-msgstr ""
-
-msgid "Monitor"
-msgstr ""
-
-msgid "Mount Entry"
-msgstr ""
-
-msgid "Mount Point"
-msgstr ""
-
-msgid "Mount Points"
-msgstr ""
-
-msgid "Mount Points - Mount Entry"
-msgstr ""
-
-msgid "Mount Points - Swap Entry"
-msgstr ""
-
-msgid ""
-"Mount Points define at which point a memory device will be attached to the "
-"filesystem"
-msgstr ""
-
-msgid "Mount options"
-msgstr ""
-
-msgid "Mount point"
-msgstr ""
-
-msgid "Mounted file systems"
-msgstr ""
-
-msgid "Move down"
-msgstr ""
-
-msgid "Move up"
-msgstr ""
-
-msgid "Multicast Rate"
-msgstr ""
-
-msgid "Multicast address"
-msgstr ""
-
-msgid "NAS ID"
-msgstr ""
-
-msgid "NTP server candidates"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Name of the new interface"
-msgstr ""
-
-msgid "Name of the new network"
-msgstr ""
-
-msgid "Navigation"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Utilities"
-msgstr ""
-
-msgid "Network boot image"
-msgstr ""
-
-msgid "Network without interfaces."
-msgstr ""
-
-msgid "Next »"
-msgstr ""
-
-msgid "No DHCP Server configured for this interface"
-msgstr ""
-
-msgid "No chains in this table"
-msgstr ""
-
-msgid "No files found"
-msgstr ""
-
-msgid "No information available"
-msgstr ""
-
-msgid "No negative cache"
-msgstr ""
-
-msgid "No network configured on this device"
-msgstr ""
-
-msgid "No network name specified"
-msgstr ""
-
-msgid "No package lists available"
-msgstr ""
-
-msgid "No password set!"
-msgstr ""
-
-msgid "No rules in this chain"
-msgstr ""
-
-msgid "No zone assigned"
-msgstr ""
-
-msgid "Noise"
-msgstr ""
-
-msgid "Noise:"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "Normal"
-msgstr ""
-
-msgid "Not Found"
-msgstr ""
-
-msgid "Not associated"
-msgstr ""
-
-msgid "Not connected"
-msgstr ""
-
-msgid "Note: Configuration files will be erased."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "Nslookup"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "OPKG-Configuration"
-msgstr ""
-
-msgid "Off-State Delay"
-msgstr ""
-
-msgid ""
-"On this page you can configure the network interfaces. You can bridge "
-"several interfaces by ticking the \"bridge interfaces\" field and enter the "
-"names of several network interfaces separated by spaces. You can also use "
-"<abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation "
-"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
-"<samp>eth0.1</samp>)."
-msgstr ""
-
-msgid "On-State Delay"
-msgstr ""
-
-msgid "One of hostname or mac address must be specified!"
-msgstr ""
-
-msgid "One or more fields contain invalid values!"
-msgstr ""
-
-msgid "One or more required fields have no value!"
-msgstr ""
-
-msgid "Open list..."
-msgstr ""
-
-msgid "Option changed"
-msgstr ""
-
-msgid "Option removed"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Other:"
-msgstr ""
-
-msgid "Out"
-msgstr ""
-
-msgid "Outbound:"
-msgstr ""
-
-msgid "Outdoor Channels"
-msgstr ""
-
-msgid "Override MAC address"
-msgstr ""
-
-msgid "Override MTU"
-msgstr ""
-
-msgid "Override the gateway in DHCP responses"
-msgstr ""
-
-msgid ""
-"Override the netmask sent to clients. Normally it is calculated from the "
-"subnet that is served."
-msgstr ""
-
-msgid "Override the table used for internal routes"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Owner"
-msgstr ""
-
-msgid "PAP/CHAP password"
-msgstr ""
-
-msgid "PAP/CHAP username"
-msgstr ""
-
-msgid "PID"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "PPP"
-msgstr ""
-
-msgid "PPPoA Encapsulation"
-msgstr ""
-
-msgid "PPPoATM"
-msgstr ""
-
-msgid "PPPoE"
-msgstr ""
-
-msgid "PPtP"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Package lists are older than 24 hours"
-msgstr ""
-
-msgid "Package name"
-msgstr ""
-
-msgid "Packets"
-msgstr ""
-
-msgid "Part of zone %q"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password authentication"
-msgstr ""
-
-msgid "Password of Private Key"
-msgstr ""
-
-msgid "Password successfully changed!"
-msgstr ""
-
-msgid "Path to CA-Certificate"
-msgstr ""
-
-msgid "Path to Client-Certificate"
-msgstr ""
-
-msgid "Path to Private Key"
-msgstr ""
-
-msgid "Path to executable which handles the button event"
-msgstr ""
-
-msgid "Peak:"
-msgstr ""
-
-msgid "Perform reboot"
-msgstr ""
-
-msgid "Perform reset"
-msgstr ""
-
-msgid "Phy Rate:"
-msgstr ""
-
-msgid "Physical Settings"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Pkts."
-msgstr ""
-
-msgid "Please enter your username and password."
-msgstr ""
-
-msgid "Please wait: Device rebooting..."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Port %d"
-msgstr ""
-
-msgid "Port %d is untagged in multiple VLANs!"
-msgstr ""
-
-msgid "Port status:"
-msgstr ""
-
-msgid ""
-"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
-"ignore failures"
-msgstr ""
-
-msgid "Prevents client-to-client communication"
-msgstr ""
-
-msgid "Prism2/2.5/3 802.11b Wireless Controller"
-msgstr ""
-
-msgid "Proceed"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Prot."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Protocol family"
-msgstr ""
-
-msgid "Protocol of the new interface"
-msgstr ""
-
-msgid "Protocol support is not installed"
-msgstr ""
-
-msgid "Provide NTP server"
-msgstr ""
-
-msgid "Provide new network"
-msgstr ""
-
-msgid "Pseudo Ad-Hoc (ahdemo)"
-msgstr ""
-
-msgid "Quality"
-msgstr ""
-
-msgid "RTS/CTS Threshold"
-msgstr ""
-
-msgid "RX"
-msgstr ""
-
-msgid "RX Rate"
-msgstr ""
-
-msgid "RaLink 802.11%s Wireless Controller"
-msgstr ""
-
-msgid "Radius-Accounting-Port"
-msgstr ""
-
-msgid "Radius-Accounting-Secret"
-msgstr ""
-
-msgid "Radius-Accounting-Server"
-msgstr ""
-
-msgid "Radius-Authentication-Port"
-msgstr ""
-
-msgid "Radius-Authentication-Secret"
-msgstr ""
-
-msgid "Radius-Authentication-Server"
-msgstr ""
-
-msgid ""
-"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
-"Configuration Protocol\">DHCP</abbr>-Server"
-msgstr ""
-
-msgid ""
-"Really delete this interface? The deletion cannot be undone!\\nYou might "
-"lose access to this device if you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really delete this wireless network? The deletion cannot be undone!\\nYou "
-"might lose access to this device if you are connected via this network."
-msgstr ""
-
-msgid "Really reset all changes?"
-msgstr ""
-
-msgid ""
-"Really shutdown interface \"%s\" ?\\nYou might lose access to this device if "
-"you are connected via this interface."
-msgstr ""
-
-msgid ""
-"Really shutdown network ?\\nYou might lose access to this device if you are "
-"connected via this interface."
-msgstr ""
-
-msgid "Really switch protocol?"
-msgstr ""
-
-msgid "Realtime Connections"
-msgstr ""
-
-msgid "Realtime Graphs"
-msgstr ""
-
-msgid "Realtime Load"
-msgstr ""
-
-msgid "Realtime Traffic"
-msgstr ""
-
-msgid "Realtime Wireless"
-msgstr ""
-
-msgid "Rebind protection"
-msgstr ""
-
-msgid "Reboot"
-msgstr ""
-
-msgid "Rebooting..."
-msgstr ""
-
-msgid "Reboots the operating system of your device"
-msgstr ""
-
-msgid "Receive"
-msgstr ""
-
-msgid "Receiver Antenna"
-msgstr ""
-
-msgid "Reconnect this interface"
-msgstr ""
-
-msgid "Reconnecting interface"
-msgstr ""
-
-msgid "References"
-msgstr ""
-
-msgid "Regulatory Domain"
-msgstr ""
-
-msgid "Relay"
-msgstr ""
-
-msgid "Relay Bridge"
-msgstr ""
-
-msgid "Relay between networks"
-msgstr ""
-
-msgid "Relay bridge"
-msgstr ""
-
-msgid "Remote IPv4 address"
-msgstr ""
-
-msgid "Remove"
-msgstr ""
-
-msgid "Repeat scan"
-msgstr ""
-
-msgid "Replace entry"
-msgstr ""
-
-msgid "Replace wireless configuration"
-msgstr ""
-
-msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
-msgstr ""
-
-msgid "Reset"
-msgstr ""
-
-msgid "Reset Counters"
-msgstr ""
-
-msgid "Reset to defaults"
-msgstr ""
-
-msgid "Resolv and Hosts Files"
-msgstr ""
-
-msgid "Resolve file"
-msgstr ""
-
-msgid "Restart"
-msgstr ""
-
-msgid "Restart Firewall"
-msgstr ""
-
-msgid "Restore backup"
-msgstr ""
-
-msgid "Reveal/hide password"
-msgstr ""
-
-msgid "Revert"
-msgstr ""
-
-msgid "Root"
-msgstr ""
-
-msgid "Root directory for files served via TFTP"
-msgstr ""
-
-msgid "Router Model"
-msgstr ""
-
-msgid "Router Name"
-msgstr ""
-
-msgid "Router Password"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid ""
-"Routes specify over which interface and gateway a certain host or network "
-"can be reached."
-msgstr ""
-
-msgid "Rule #"
-msgstr ""
-
-msgid "Run a filesystem check before mounting the device"
-msgstr ""
-
-msgid "Run filesystem check"
-msgstr ""
-
-msgid "SSH Access"
-msgstr ""
-
-msgid "SSH-Keys"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Save & Apply"
-msgstr ""
-
-msgid "Save &#38; Apply"
-msgstr ""
-
-msgid "Scan"
-msgstr ""
-
-msgid "Scheduled Tasks"
-msgstr ""
-
-msgid "Section added"
-msgstr ""
-
-msgid "Section removed"
-msgstr ""
-
-msgid "See \"mount\" manpage for details"
-msgstr ""
-
-msgid ""
-"Send LCP echo requests at the given interval in seconds, only effective in "
-"conjunction with failure threshold"
-msgstr ""
-
-msgid "Send router solicitations"
-msgstr ""
-
-msgid "Separate Clients"
-msgstr ""
-
-msgid "Separate WDS"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Service Name"
-msgstr ""
-
-msgid "Service Type"
-msgstr ""
-
-msgid "Services"
-msgstr ""
-
-msgid "Setup DHCP Server"
-msgstr ""
-
-msgid "Setup Time Synchronization"
-msgstr ""
-
-msgid "Show current backup file list"
-msgstr ""
-
-msgid "Shutdown this interface"
-msgstr ""
-
-msgid "Shutdown this network"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Signal:"
-msgstr ""
-
-msgid "Size"
-msgstr ""
-
-msgid "Skip"
-msgstr ""
-
-msgid "Skip to content"
-msgstr ""
-
-msgid "Skip to navigation"
-msgstr ""
-
-msgid "Slot time"
-msgstr ""
-
-msgid "Software"
-msgstr ""
-
-msgid "Some fields are invalid, cannot save values!"
-msgstr ""
-
-msgid "Sorry, the object you requested was not found."
-msgstr ""
-
-msgid "Sorry, the server encountered an unexpected error."
-msgstr ""
-
-msgid ""
-"Sorry, there is no sysupgrade support present, a new firmware image must be "
-"flashed manually. Please refer to the OpenWrt wiki for device specific "
-"install instructions."
-msgstr ""
-
-msgid "Sort"
-msgstr ""
-
-msgid "Source"
-msgstr ""
-
-msgid "Specifies the advertised preferred prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the advertised valid prefix lifetime in seconds"
-msgstr ""
-
-msgid "Specifies the button state to handle"
-msgstr ""
-
-msgid "Specifies the directory the device is attached to"
-msgstr ""
-
-msgid "Specifies the listening port of this <em>Dropbear</em> instance"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of failed ARP requests until hosts are presumed "
-"to be dead"
-msgstr ""
-
-msgid ""
-"Specifies the maximum amount of seconds after which hosts are presumed to be "
-"dead"
-msgstr ""
-
-msgid "Specify the secret encryption key here."
-msgstr ""
-
-msgid "Start"
-msgstr ""
-
-msgid "Start priority"
-msgstr ""
-
-msgid "Startup"
-msgstr ""
-
-msgid "Static IPv4 Routes"
-msgstr ""
-
-msgid "Static IPv6 Routes"
-msgstr ""
-
-msgid "Static Leases"
-msgstr ""
-
-msgid "Static Routes"
-msgstr ""
-
-msgid "Static WDS"
-msgstr ""
-
-msgid "Static address"
-msgstr ""
-
-msgid ""
-"Static leases are used to assign fixed IP addresses and symbolic hostnames "
-"to DHCP clients. They are also required for non-dynamic interface "
-"configurations where only hosts with a corresponding lease are served."
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Stop"
-msgstr ""
-
-msgid "Strict order"
-msgstr ""
-
-msgid "Submit"
-msgstr ""
-
-msgid "Swap Entry"
-msgstr ""
-
-msgid "Switch"
-msgstr ""
-
-msgid "Switch %q"
-msgstr ""
-
-msgid "Switch %q (%s)"
-msgstr ""
-
-msgid "Switch protocol"
-msgstr ""
-
-msgid "Sync with browser"
-msgstr ""
-
-msgid "Synchronizing..."
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "System Log"
-msgstr ""
-
-msgid "System Properties"
-msgstr ""
-
-msgid "System log buffer size"
-msgstr ""
-
-msgid "TCP:"
-msgstr ""
-
-msgid "TFTP Settings"
-msgstr ""
-
-msgid "TFTP server root"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid "TX Rate"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Terminate"
-msgstr ""
-
-msgid ""
-"The <em>Device Configuration</em> section covers physical settings of the "
-"radio hardware such as channel, transmit power or antenna selection which is "
-"shared among all defined wireless networks (if the radio hardware is multi-"
-"SSID capable). Per network settings like encryption or operation mode are "
-"grouped in the <em>Interface Configuration</em>."
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo-lua</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The IPv6 prefix assigned to the provider, usually ends with <code>::</code>"
-msgstr ""
-
-msgid ""
-"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
-"code> and <code>_</code>"
-msgstr ""
-
-msgid ""
-"The device file of the memory or partition (<abbr title=\"for example\">e.g."
-"</abbr> <code>/dev/sda1</code>)"
-msgstr ""
-
-msgid ""
-"The filesystem that was used to format the memory (<abbr title=\"for example"
-"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
-"samp>)"
-msgstr ""
-
-msgid ""
-"The flash image was uploaded. Below is the checksum and file size listed, "
-"compare them with the original file to ensure data integrity.<br /> Click "
-"\"Proceed\" below to start the flash procedure."
-msgstr ""
-
-msgid "The following changes have been committed"
-msgstr ""
-
-msgid "The following changes have been reverted"
-msgstr ""
-
-msgid "The following rules are currently active on this system."
-msgstr ""
-
-msgid "The given network name is not unique"
-msgstr ""
-
-msgid ""
-"The hardware is not multi-SSID capable and existing configuration will be "
-"replaced if you proceed."
-msgstr ""
-
-msgid ""
-"The length of the IPv4 prefix in bits, the remainder is used in the IPv6 "
-"addresses."
-msgstr ""
-
-msgid "The length of the IPv6 prefix in bits"
-msgstr ""
-
-msgid ""
-"The network ports on this device can be combined to several <abbr title="
-"\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
-"communicate directly with each other. <abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>s are often used to separate different network "
-"segments. Often there is by default one Uplink port for a connection to the "
-"next greater network like the internet and other ports for a local network."
-msgstr ""
-
-msgid "The selected protocol needs a device assigned"
-msgstr ""
-
-msgid ""
-"The system is erasing the configuration partition now and will reboot itself "
-"when finished."
-msgstr ""
-
-msgid ""
-"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
-"few minutes until you try to reconnect. It might be necessary to renew the "
-"address of your computer to reach the device again, depending on your "
-"settings."
-msgstr ""
-
-msgid ""
-"The uploaded image file does not contain a supported format. Make sure that "
-"you choose the generic image format for your platform."
-msgstr ""
-
-msgid "There are no active leases."
-msgstr ""
-
-msgid "There are no pending changes to apply!"
-msgstr ""
-
-msgid "There are no pending changes to revert!"
-msgstr ""
-
-msgid "There are no pending changes!"
-msgstr ""
-
-msgid ""
-"There is no device assigned yet, please attach a network device in the "
-"\"Physical Settings\" tab"
-msgstr ""
-
-msgid ""
-"There is no password set on this router. Please configure a root password to "
-"protect the web interface and enable SSH."
-msgstr ""
-
-msgid "This IPv4 address of the relay"
-msgstr ""
-
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade. Modified files in /etc/config/ and certain other "
-"configurations are automatically preserved."
-msgstr ""
-
-msgid "This is the 32 byte hex encoded user ID, not the login name"
-msgstr ""
-
-msgid ""
-"This is the content of /etc/rc.local. Insert your own commands here (in "
-"front of 'exit 0') to execute them at the end of the boot process."
-msgstr ""
-
-msgid ""
-"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr ""
-
-msgid ""
-"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr> in the local network"
-msgstr ""
-
-msgid "This is the system crontab in which scheduled tasks can be defined."
-msgstr ""
-
-msgid ""
-"This is usually the address of the nearest PoP operated by the tunnel broker"
-msgstr ""
-
-msgid ""
-"This list gives an overview over currently running system processes and "
-"their status."
-msgstr ""
-
-msgid "This page allows the configuration of custom button actions"
-msgstr ""
-
-msgid "This page gives an overview over currently active network connections."
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time Synchronization"
-msgstr ""
-
-msgid "Time Synchronization is not configured yet."
-msgstr ""
-
-msgid "Timezone"
-msgstr ""
-
-msgid ""
-"To restore configuration files, you can upload a previously generated backup "
-"archive here."
-msgstr ""
-
-msgid "Total Available"
-msgstr ""
-
-msgid "Traceroute"
-msgstr ""
-
-msgid "Traffic"
-msgstr ""
-
-msgid "Transfer"
-msgstr ""
-
-msgid "Transmission Rate"
-msgstr ""
-
-msgid "Transmit"
-msgstr ""
-
-msgid "Transmit Power"
-msgstr ""
-
-msgid "Transmitter Antenna"
-msgstr ""
-
-msgid "Trigger"
-msgstr ""
-
-msgid "Trigger Mode"
-msgstr ""
-
-msgid "Tunnel ID"
-msgstr ""
-
-msgid "Tunnel Interface"
-msgstr ""
-
-msgid "Turbo Mode"
-msgstr ""
-
-msgid "Tx-Power"
-msgstr ""
-
-msgid "Type"
-msgstr ""
-
-msgid "UDP:"
-msgstr ""
-
-msgid "UMTS only"
-msgstr ""
-
-msgid "UMTS/GPRS/EV-DO"
-msgstr ""
-
-msgid "USB Device"
-msgstr ""
-
-msgid "UUID"
-msgstr ""
-
-msgid "Unable to dispatch"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "Unknown Error, password not changed!"
-msgstr ""
-
-msgid "Unmanaged"
-msgstr ""
-
-msgid "Unsaved Changes"
-msgstr ""
-
-msgid "Unsupported protocol type."
-msgstr ""
-
-msgid "Update lists"
-msgstr ""
-
-msgid ""
-"Upload a sysupgrade-compatible image here to replace the running firmware. "
-"Check \"Keep settings\" to retain the current configuration (requires an "
-"OpenWrt compatible firmware image)."
-msgstr ""
-
-msgid "Upload archive..."
-msgstr ""
-
-msgid "Uploaded File"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Use <code>/etc/ethers</code>"
-msgstr ""
-
-msgid "Use DHCP gateway"
-msgstr ""
-
-msgid "Use DNS servers advertised by peer"
-msgstr ""
-
-msgid "Use ISO/IEC 3166 alpha2 country codes."
-msgstr ""
-
-msgid "Use MTU on tunnel interface"
-msgstr ""
-
-msgid "Use TTL on tunnel interface"
-msgstr ""
-
-msgid "Use as root filesystem"
-msgstr ""
-
-msgid "Use broadcast flag"
-msgstr ""
-
-msgid "Use custom DNS servers"
-msgstr ""
-
-msgid "Use default gateway"
-msgstr ""
-
-msgid "Use gateway metric"
-msgstr ""
-
-msgid "Use preferred lifetime"
-msgstr ""
-
-msgid "Use routing table"
-msgstr ""
-
-msgid ""
-"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host."
-msgstr ""
-
-msgid "Use valid lifetime"
-msgstr ""
-
-msgid "Used"
-msgstr ""
-
-msgid "Used Key Slot"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "VC-Mux"
-msgstr ""
-
-msgid "VLAN Interface"
-msgstr ""
-
-msgid "VLANs on %q"
-msgstr ""
-
-msgid "VLANs on %q (%s)"
-msgstr ""
-
-msgid "VPN Server"
-msgstr ""
-
-msgid "Vendor Class to send when requesting DHCP"
-msgstr ""
-
-msgid "Verify"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WDS"
-msgstr ""
-
-msgid "WEP Open System"
-msgstr ""
-
-msgid "WEP Shared Key"
-msgstr ""
-
-msgid "WEP passphrase"
-msgstr ""
-
-msgid "WMM Mode"
-msgstr ""
-
-msgid "WPA passphrase"
-msgstr ""
-
-msgid ""
-"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
-"and ad-hoc mode) to be installed."
-msgstr ""
-
-msgid "Waiting for changes to be applied..."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
-
-msgid "Warning"
-msgstr ""
-
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
-msgstr ""
-
-msgid "Wifi"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless Adapter"
-msgstr ""
-
-msgid "Wireless Network"
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Wireless Security"
-msgstr ""
-
-msgid "Wireless is disabled or not associated"
-msgstr ""
-
-msgid "Wireless is restarting..."
-msgstr ""
-
-msgid "Wireless network is disabled"
-msgstr ""
-
-msgid "Wireless network is enabled"
-msgstr ""
-
-msgid "Wireless restarted"
-msgstr ""
-
-msgid "Wireless shut down"
-msgstr ""
-
-msgid "Write received DNS requests to syslog"
-msgstr ""
-
-msgid "XR Support"
-msgstr ""
-
-msgid ""
-"You can enable or disable installed init scripts here. Changes will applied "
-"after a device reboot.<br /><strong>Warning: If you disable essential init "
-"scripts like \"network\", your device might become inaccessible!</strong>"
-msgstr ""
-
-msgid ""
-"You must enable Java Script in your browser or LuCI will not work properly."
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "auto"
-msgstr ""
-
-msgid "baseT"
-msgstr ""
-
-msgid "bridged"
-msgstr ""
-
-msgid "create:"
-msgstr ""
-
-msgid "creates a bridge over specified interface(s)"
-msgstr ""
-
-msgid "dB"
-msgstr ""
-
-msgid "dBm"
-msgstr ""
-
-msgid "disable"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid ""
-"file where given <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
-"abbr>-leases will be stored"
-msgstr ""
-
-msgid "forward"
-msgstr ""
-
-msgid "full-duplex"
-msgstr ""
-
-msgid "half-duplex"
-msgstr ""
-
-msgid "help"
-msgstr ""
-
-msgid "hidden"
-msgstr ""
-
-msgid "if target is a network"
-msgstr ""
-
-msgid "input"
-msgstr ""
-
-msgid "kB"
-msgstr ""
-
-msgid "kB/s"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "no link"
-msgstr ""
-
-msgid "none"
-msgstr ""
-
-msgid "off"
-msgstr ""
-
-msgid "on"
-msgstr ""
-
-msgid "open"
-msgstr ""
-
-msgid "routed"
-msgstr ""
-
-msgid "tagged"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "unlimited"
-msgstr ""
-
-msgid "unspecified"
-msgstr ""
-
-msgid "unspecified -or- create:"
-msgstr ""
-
-msgid "untagged"
-msgstr ""
-
-msgid "yes"
-msgstr ""
-
-msgid "« Back"
-msgstr ""
diff --git a/po/zh_TW/commands.po b/po/zh_TW/commands.po
deleted file mode 100644
index ac0b9de..0000000
--- a/po/zh_TW/commands.po
+++ /dev/null
@@ -1,90 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "A short textual description of the configured command"
-msgstr ""
-
-msgid "Access command with"
-msgstr ""
-
-msgid ""
-"Allow executing the command and downloading its output without prior "
-"authentication"
-msgstr ""
-
-msgid "Allow the user to provide additional command line arguments"
-msgstr ""
-
-msgid "Arguments:"
-msgstr ""
-
-msgid "Binary data not displayed, download instead."
-msgstr ""
-
-msgid "Code:"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Command"
-msgstr ""
-
-msgid "Command failed"
-msgstr ""
-
-msgid "Command line to execute"
-msgstr ""
-
-msgid "Command successful"
-msgstr ""
-
-msgid "Command:"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Custom Commands"
-msgstr ""
-
-msgid "Custom arguments"
-msgstr ""
-
-msgid "Dashboard"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Download"
-msgstr ""
-
-msgid "Failed to execute command!"
-msgstr ""
-
-msgid "Link"
-msgstr ""
-
-msgid "Loading"
-msgstr ""
-
-msgid "Public access"
-msgstr ""
-
-msgid "Run"
-msgstr ""
-
-msgid ""
-"This page allows you to configure custom shell commands which can be easily "
-"invoked from the web interface."
-msgstr ""
-
-msgid "Waiting for command to complete..."
-msgstr ""
diff --git a/po/zh_TW/coovachilli.po b/po/zh_TW/coovachilli.po
deleted file mode 100644
index 7ea9767..0000000
--- a/po/zh_TW/coovachilli.po
+++ /dev/null
@@ -1,20 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "CoovaChilli"
-msgstr ""
-
-msgid "Network Configuration"
-msgstr ""
-
-msgid "RADIUS configuration"
-msgstr ""
-
-msgid "UAM and MAC Authentication"
-msgstr ""
diff --git a/po/zh_TW/ddns.po b/po/zh_TW/ddns.po
deleted file mode 100644
index bd1d1ce..0000000
--- a/po/zh_TW/ddns.po
+++ /dev/null
@@ -1,79 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Check for changed IP every"
-msgstr ""
-
-msgid "Check-time unit"
-msgstr ""
-
-msgid "Custom update-URL"
-msgstr ""
-
-msgid "Dynamic DNS"
-msgstr ""
-
-msgid ""
-"Dynamic DNS allows that your router can be reached with a fixed hostname "
-"while having a dynamically changing IP address."
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Event interface"
-msgstr ""
-
-msgid "Force update every"
-msgstr ""
-
-msgid "Force-time unit"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "On which interface up should start the ddns script process."
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source of IP address"
-msgstr ""
-
-msgid "URL"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "custom"
-msgstr ""
-
-msgid "h"
-msgstr ""
-
-msgid "interface"
-msgstr ""
-
-msgid "min"
-msgstr ""
-
-msgid "network"
-msgstr ""
diff --git a/po/zh_TW/diag_core.po b/po/zh_TW/diag_core.po
deleted file mode 100644
index b1d29e8..0000000
--- a/po/zh_TW/diag_core.po
+++ /dev/null
@@ -1,29 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configure Diagnostics"
-msgstr ""
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available under this menu depend on what modules you have "
-"installed on your device."
-msgstr ""
-
-msgid ""
-"The entries in the menu allow you to perform diagnostic tests on your system "
-"to aid in troubleshooting."
-msgstr ""
-
-msgid ""
-"With this menu you can configure network diagnostics, such as network device "
-"scans and ping tests."
-msgstr ""
diff --git a/po/zh_TW/diag_devinfo.po b/po/zh_TW/diag_devinfo.po
deleted file mode 100644
index 4e2e8eb..0000000
--- a/po/zh_TW/diag_devinfo.po
+++ /dev/null
@@ -1,205 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Actions"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Beginning of MAC address range"
-msgstr ""
-
-msgid "Config Phone Scan"
-msgstr ""
-
-msgid "Configure"
-msgstr ""
-
-msgid "Configure Scans"
-msgstr ""
-
-msgid ""
-"Configure scanning for devices on specified networks. Decreasing 'Timeout', "
-"'Repeat Count', and/or 'Sleep Between Requests' may speed up scans, but also "
-"may fail to find some devices."
-msgstr ""
-
-msgid ""
-"Configure scanning for supported SIP devices on specified networks. "
-"Decreasing 'Timeout', 'Repeat Count', and/or 'Sleep Between Requests' may "
-"speed up scans, but also may fail to find some devices."
-msgstr ""
-
-msgid "Delete"
-msgstr ""
-
-msgid "Device Scan Config"
-msgstr ""
-
-msgid "Device Type"
-msgstr ""
-
-msgid "Devices discovered for"
-msgstr ""
-
-msgid "Devices on Network"
-msgstr ""
-
-msgid "Edit"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "End of MAC address range"
-msgstr ""
-
-msgid "Go to relevant configuration page"
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Link to Device"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC Device Info Overrides"
-msgstr ""
-
-msgid "MAC Device Override"
-msgstr ""
-
-msgid "MAC range and information used to override system and IEEE databases"
-msgstr ""
-
-msgid "Milliseconds to sleep between requests (default 100)"
-msgstr ""
-
-msgid "Model"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Device Scan"
-msgstr ""
-
-msgid "Network Device Scanning Configuration"
-msgstr ""
-
-msgid "Networks to scan for devices"
-msgstr ""
-
-msgid "Networks to scan for supported devices"
-msgstr ""
-
-msgid "No SIP devices"
-msgstr ""
-
-msgid "No devices detected"
-msgstr ""
-
-msgid "Number of times to send requests (default 1)"
-msgstr ""
-
-msgid "OUI Owner"
-msgstr ""
-
-msgid ""
-"Override the information returned by the MAC to Device Info Script (mac-to-"
-"devinfo) for a specified range of MAC Addresses"
-msgstr ""
-
-msgid "Perform Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "Phone Information"
-msgstr ""
-
-msgid "Phone Scan"
-msgstr ""
-
-msgid "Phone Scanning Configuration"
-msgstr ""
-
-msgid "Phones"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Raw"
-msgstr ""
-
-msgid "Repeat Count"
-msgstr ""
-
-msgid "Repeat Scans (this can take a few minutes)"
-msgstr ""
-
-msgid "SIP Device Information"
-msgstr ""
-
-msgid "SIP Device Scan"
-msgstr ""
-
-msgid "SIP Device Scanning Configuration"
-msgstr ""
-
-msgid "SIP Devices on Network"
-msgstr ""
-
-msgid "SIP devices discovered for"
-msgstr ""
-
-msgid "Scan for devices on specified networks."
-msgstr ""
-
-msgid "Scan for supported SIP devices on specified networks."
-msgstr ""
-
-msgid "Scanning Configuration"
-msgstr ""
-
-msgid "Scans for devices on specified networks."
-msgstr ""
-
-msgid "Sleep Between Requests"
-msgstr ""
-
-msgid "Subnet"
-msgstr ""
-
-msgid "This section contains no values yet"
-msgstr ""
-
-msgid "Time to wait for responses in seconds (default 10)"
-msgstr ""
-
-msgid "Timeout"
-msgstr ""
-
-msgid "Use Configuration"
-msgstr ""
-
-msgid "Vendor"
-msgstr ""
-
-msgid "check other networks"
-msgstr ""
diff --git a/po/zh_TW/ffwizard.po b/po/zh_TW/ffwizard.po
deleted file mode 100644
index 709fd71..0000000
--- a/po/zh_TW/ffwizard.po
+++ /dev/null
@@ -1,158 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ASCII\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow to transfer anonymous statistics about this node"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Configure network"
-msgstr ""
-
-msgid "Connect your node with other nodes with a tunnel via the internet."
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "DNS Server"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Heartbeat"
-msgstr ""
-
-msgid "IP address"
-msgstr ""
-
-msgid "L2gvpn tunnel"
-msgstr ""
-
-msgid "Limit download bandwidth"
-msgstr ""
-
-msgid "Limit upload bandwidth"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 Address"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid "Password confirmation"
-msgstr ""
-
-msgid "Password successfully changed"
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Select this checkbox to configure your network interfaces."
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The ipv6 address is calculated auomatically."
-msgstr ""
-
-msgid "The protocol to use for internet connectivity."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Unknown Error"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "dhcp"
-msgstr ""
-
-msgid "kbit/s"
-msgstr ""
-
-msgid "static"
-msgstr ""
-
-msgid "Configure this interface."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "You can not use the wizard because some necessary values are missing."
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
diff --git a/po/zh_TW/firewall.po b/po/zh_TW/firewall.po
deleted file mode 100644
index 39cf056..0000000
--- a/po/zh_TW/firewall.po
+++ /dev/null
@@ -1,428 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "%s in %s"
-msgstr ""
-
-msgid "%s%s with %s"
-msgstr ""
-
-msgid "%s, %s in %s"
-msgstr ""
-
-msgid "(Unnamed Entry)"
-msgstr ""
-
-msgid "(Unnamed Rule)"
-msgstr ""
-
-msgid "(Unnamed SNAT)"
-msgstr ""
-
-msgid "-- Please choose --"
-msgstr ""
-
-msgid "-- custom --"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>"
-msgstr ""
-
-msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
-msgstr ""
-
-msgid "<var>%s</var> and limit to %s"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add and edit..."
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow forward from <em>source zones</em>:"
-msgstr ""
-
-msgid "Allow forward to <em>destination zones</em>:"
-msgstr ""
-
-msgid "Any"
-msgstr ""
-
-msgid "Covered networks"
-msgstr ""
-
-msgid "Custom Rules"
-msgstr ""
-
-msgid ""
-"Custom rules allow you to execute arbritary iptables commands which are not "
-"otherwise covered by the firewall framework. The commands are executed after "
-"each firewall restart, right after the default ruleset has been loaded."
-msgstr ""
-
-msgid "Destination IP address"
-msgstr ""
-
-msgid "Destination address"
-msgstr ""
-
-msgid "Destination port"
-msgstr ""
-
-msgid "Destination zone"
-msgstr ""
-
-msgid "Do not rewrite"
-msgstr ""
-
-msgid "Drop invalid packets"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable NAT Loopback"
-msgstr ""
-
-msgid "Enable SYN-flood protection"
-msgstr ""
-
-msgid "Enable logging on this zone"
-msgstr ""
-
-msgid "External IP address"
-msgstr ""
-
-msgid "External port"
-msgstr ""
-
-msgid "External zone"
-msgstr ""
-
-msgid "Extra arguments"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Firewall - Custom Rules"
-msgstr ""
-
-msgid "Firewall - Port Forwards"
-msgstr ""
-
-msgid "Firewall - Traffic Rules"
-msgstr ""
-
-msgid "Firewall - Zone Settings"
-msgstr ""
-
-msgid "Force connection tracking"
-msgstr ""
-
-msgid "Forward"
-msgstr ""
-
-msgid "Forward to"
-msgstr ""
-
-msgid "From %s in %s"
-msgstr ""
-
-msgid "From %s in %s with source %s"
-msgstr ""
-
-msgid "From %s in %s with source %s and %s"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 and IPv6"
-msgstr ""
-
-msgid "IPv4 only"
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 only"
-msgstr ""
-
-msgid "Input"
-msgstr ""
-
-msgid "Inter-Zone Forwarding"
-msgstr ""
-
-msgid "Internal IP address"
-msgstr ""
-
-msgid "Internal port"
-msgstr ""
-
-msgid "Internal zone"
-msgstr ""
-
-msgid "Limit log messages"
-msgstr ""
-
-msgid "MSS clamping"
-msgstr ""
-
-msgid "Masquerading"
-msgstr ""
-
-msgid "Match"
-msgstr ""
-
-msgid "Match ICMP type"
-msgstr ""
-
-msgid "Match forwarded traffic to the given destination port or port range."
-msgstr ""
-
-msgid ""
-"Match incoming traffic directed at the given destination port or port range "
-"on this host"
-msgstr ""
-
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host."
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "New SNAT rule"
-msgstr ""
-
-msgid "New forward rule"
-msgstr ""
-
-msgid "New input rule"
-msgstr ""
-
-msgid "New port forward"
-msgstr ""
-
-msgid "New source NAT"
-msgstr ""
-
-msgid "Only match incoming traffic directed at the given IP address."
-msgstr ""
-
-msgid "Only match incoming traffic from these MACs."
-msgstr ""
-
-msgid "Only match incoming traffic from this IP or range."
-msgstr ""
-
-msgid ""
-"Only match incoming traffic originating from the given source port or port "
-"range on the client host"
-msgstr ""
-
-msgid "Open ports on router"
-msgstr ""
-
-msgid "Other..."
-msgstr ""
-
-msgid "Output"
-msgstr ""
-
-msgid "Passes additional arguments to iptables. Use with care!"
-msgstr ""
-
-msgid "Port Forwards"
-msgstr ""
-
-msgid ""
-"Port forwarding allows remote computers on the Internet to connect to a "
-"specific computer or service within the private LAN."
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid ""
-"Redirect matched incoming traffic to the given port on the internal host"
-msgstr ""
-
-msgid "Redirect matched incoming traffic to the specified internal host"
-msgstr ""
-
-msgid "Restrict Masquerading to given destination subnets"
-msgstr ""
-
-msgid "Restrict Masquerading to given source subnets"
-msgstr ""
-
-msgid "Restrict to address family"
-msgstr ""
-
-msgid "Rewrite matched traffic to the given address."
-msgstr ""
-
-msgid ""
-"Rewrite matched traffic to the given source port. May be left empty to only "
-"rewrite the IP address."
-msgstr ""
-
-msgid "Rewrite to source %s"
-msgstr ""
-
-msgid "Rewrite to source %s, %s"
-msgstr ""
-
-msgid "SNAT IP address"
-msgstr ""
-
-msgid "SNAT port"
-msgstr ""
-
-msgid "Source IP address"
-msgstr ""
-
-msgid "Source MAC address"
-msgstr ""
-
-msgid "Source NAT"
-msgstr ""
-
-msgid ""
-"Source NAT is a specific form of masquerading which allows fine grained "
-"control over the source IP used for outgoing traffic, for example to map "
-"multiple WAN addresses to internal subnets."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid "Source port"
-msgstr ""
-
-msgid "Source zone"
-msgstr ""
-
-msgid ""
-"The firewall creates zones over your network interfaces to control network "
-"traffic flow."
-msgstr ""
-
-msgid ""
-"The options below control the forwarding policies between this zone (%s) and "
-"other zones. <em>Destination zones</em> cover forwarded traffic "
-"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
-"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
-"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
-"<em>not</em> imply a permission to forward from wan to lan as well."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the port forwarding "
-"entry. In most cases there is no need to modify those settings."
-msgstr ""
-
-msgid ""
-"This page allows you to change advanced properties of the traffic rule "
-"entry, such as matched source and destination hosts."
-msgstr ""
-
-msgid ""
-"This section defines common properties of %q. The <em>input</em> and "
-"<em>output</em> options set the default policies for traffic entering and "
-"leaving this zone while the <em>forward</em> option describes the policy for "
-"forwarded traffic between different networks within the zone. <em>Covered "
-"networks</em> specifies which available networks are member of this zone."
-msgstr ""
-
-msgid "To %s at %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s in %s"
-msgstr ""
-
-msgid "To %s on <var>this device</var>"
-msgstr ""
-
-msgid "To %s, %s in %s"
-msgstr ""
-
-msgid "To source IP"
-msgstr ""
-
-msgid "To source port"
-msgstr ""
-
-msgid "Traffic Rules"
-msgstr ""
-
-msgid ""
-"Traffic rules define policies for packets traveling between different zones, "
-"for example to reject traffic between certain hosts or to open WAN ports on "
-"the router."
-msgstr ""
-
-msgid "Via %s"
-msgstr ""
-
-msgid "Via %s at %s"
-msgstr ""
-
-msgid ""
-"You may specify multiple by selecting \"-- custom --\" and then entering "
-"protocols separated by space."
-msgstr ""
-
-msgid "Zone %q"
-msgstr ""
-
-msgid "Zone ⇒ Forwardings"
-msgstr ""
-
-msgid "Zones"
-msgstr ""
-
-msgid "accept"
-msgstr ""
-
-msgid "any"
-msgstr ""
-
-msgid "any host"
-msgstr ""
-
-msgid "any router IP"
-msgstr ""
-
-msgid "any zone"
-msgstr ""
-
-msgid "don't track"
-msgstr ""
-
-msgid "drop"
-msgstr ""
-
-msgid "reject"
-msgstr ""
diff --git a/po/zh_TW/freifunk-policyrouting.po b/po/zh_TW/freifunk-policyrouting.po
deleted file mode 100644
index 58efa74..0000000
--- a/po/zh_TW/freifunk-policyrouting.po
+++ /dev/null
@@ -1,48 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"All traffic from interfaces belonging to these zones will be sent via a "
-"gateway in the mesh network."
-msgstr ""
-
-msgid "Enable Policy Routing"
-msgstr ""
-
-msgid "Fallback to mesh"
-msgstr ""
-
-msgid "Firewall zones"
-msgstr ""
-
-msgid ""
-"If no default route is received from the mesh network then traffic which "
-"belongs to the selected firewall zones is routed via your internet "
-"connection as a fallback. If you do not want this and instead block that "
-"traffic then you should select this option."
-msgstr ""
-
-msgid ""
-"If your own gateway is not available then fallback to the mesh default "
-"gateway."
-msgstr ""
-
-msgid "Policy Routing"
-msgstr ""
-
-msgid "Strict Filtering"
-msgstr ""
-
-msgid ""
-"These pages can be used to setup policy routing for certain firewall zones. "
-"This is useful if you need to use your own internet connection for yourself "
-"but you don't want to share it with others (thats why it can also be called "
-"'Ego Mode'). Your own traffic is then sent via your internet connection "
-"while traffic originating from the mesh will use another gateway in the mesh."
-msgstr ""
diff --git a/po/zh_TW/freifunk.po b/po/zh_TW/freifunk.po
deleted file mode 100644
index cba0e91..0000000
--- a/po/zh_TW/freifunk.po
+++ /dev/null
@@ -1,384 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "BSSID"
-msgstr ""
-
-msgid "Bad (ETX > 10)"
-msgstr ""
-
-msgid "Basic Settings"
-msgstr ""
-
-msgid "Basic settings"
-msgstr ""
-
-msgid "Basic settings are incomplete. Please go to"
-msgstr ""
-
-msgid "Basic system settings"
-msgstr ""
-
-msgid "Bitrate"
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check for new firmware versions and perform automatic updates."
-msgstr ""
-
-msgid "Client network size"
-msgstr ""
-
-msgid "Community"
-msgstr ""
-
-msgid "Community profile"
-msgstr ""
-
-msgid "Community settings"
-msgstr ""
-
-msgid "Confirm Upgrade"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Contact information is incomplete. Please go to"
-msgstr ""
-
-msgid "Coordinates"
-msgstr ""
-
-msgid "Country code"
-msgstr ""
-
-msgid "Default routes"
-msgstr ""
-
-msgid "Disable default content"
-msgstr ""
-
-msgid "Diversity is enabled for device"
-msgstr ""
-
-msgid "E-Mail"
-msgstr ""
-
-msgid "ESSID"
-msgstr ""
-
-msgid "Edit index page"
-msgstr ""
-
-msgid "Enable IPv6"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Find your coordinates with OpenStreetMap"
-msgstr ""
-
-msgid "Freifunk"
-msgstr ""
-
-msgid "Freifunk Overview"
-msgstr ""
-
-msgid "Freifunk Remote Update"
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "Go to"
-msgstr ""
-
-msgid "Good (2 < ETX < 4)"
-msgstr ""
-
-msgid "Green"
-msgstr ""
-
-msgid "Hello and welcome in the network of"
-msgstr ""
-
-msgid "Hide OpenStreetMap"
-msgstr ""
-
-msgid "Homepage"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IPv6 Config"
-msgstr ""
-
-msgid "IPv6 Prefix"
-msgstr ""
-
-msgid "IPv6 network in CIDR notation."
-msgstr ""
-
-msgid "If selected then the default content element is not shown."
-msgstr ""
-
-msgid "If you are interested in our project then contact the local community"
-msgstr ""
-
-msgid "Index Page"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Internet access depends on technical and organisational conditions and may "
-"or may not work for you."
-msgstr ""
-
-msgid "It is operated by"
-msgstr ""
-
-msgid "Keep configuration"
-msgstr ""
-
-msgid "Latitude"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Load"
-msgstr ""
-
-msgid "Local Time"
-msgstr ""
-
-msgid "Location"
-msgstr ""
-
-msgid "Longitude"
-msgstr ""
-
-msgid "Map"
-msgstr ""
-
-msgid "Map Error"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Mesh prefix"
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network for client DHCP addresses"
-msgstr ""
-
-msgid "Nickname"
-msgstr ""
-
-msgid "No default routes known."
-msgstr ""
-
-msgid "Notice"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "Operator"
-msgstr ""
-
-msgid "Orange"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Package libiwinfo required!"
-msgstr ""
-
-msgid "Phone"
-msgstr ""
-
-msgid "Please fill in your contact details below."
-msgstr ""
-
-msgid "Please set your contact information"
-msgstr ""
-
-msgid "Power"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Profile"
-msgstr ""
-
-msgid "Profile (Expert)"
-msgstr ""
-
-msgid "Realname"
-msgstr ""
-
-msgid "Red"
-msgstr ""
-
-msgid "SSID"
-msgstr ""
-
-msgid ""
-"Select your location with a mouse click on the map. The map will only show "
-"up if you are connected to the Internet."
-msgstr ""
-
-msgid "Show OpenStreetMap"
-msgstr ""
-
-msgid "Show on map"
-msgstr ""
-
-msgid "Signal"
-msgstr ""
-
-msgid "Splash"
-msgstr ""
-
-msgid "Start Upgrade"
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Still usable (4 < ETX < 10)"
-msgstr ""
-
-msgid "System"
-msgstr ""
-
-msgid "TX"
-msgstr ""
-
-msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
-"component for working wireless configuration!"
-msgstr ""
-
-msgid ""
-"The OLSRd service is not configured to capture position data from the "
-"network.<br /> Please make sure that the nameservice plugin is properly "
-"configured and that the <em>latlon_file</em> option is enabled."
-msgstr ""
-
-msgid "The installed firmware is the most recent version."
-msgstr ""
-
-msgid ""
-"These are the basic settings for your local wireless community. These "
-"settings define the default values for the wizard and DO NOT affect the "
-"actual configuration of the router."
-msgstr ""
-
-msgid "These are the settings of your local community."
-msgstr ""
-
-msgid ""
-"These pages will assist you in setting up your router for Freifunk or "
-"similar wireless community networks."
-msgstr ""
-
-msgid "This is the access point"
-msgstr ""
-
-msgid "Update Settings"
-msgstr ""
-
-msgid "Update available!"
-msgstr ""
-
-msgid "Uptime"
-msgstr ""
-
-msgid "Verify downloaded images"
-msgstr ""
-
-msgid "Very good (ETX < 2)"
-msgstr ""
-
-msgid ""
-"We are an initiative to establish a free, independent and open wireless mesh "
-"network."
-msgstr ""
-
-msgid "Wireless Overview"
-msgstr ""
-
-msgid "Yellow"
-msgstr ""
-
-msgid ""
-"You can display additional content on the public index page by inserting "
-"valid XHTML in the form below.<br />Headlines should be enclosed between &lt;"
-"h2&gt; and &lt;/h2&gt;."
-msgstr ""
-
-msgid ""
-"You can find further information about the global Freifunk initiative at"
-msgstr ""
-
-msgid "You can manually edit the selected community profile here."
-msgstr ""
-
-msgid ""
-"You need to select a profile before you can edit it. To select a profile go "
-"to"
-msgstr ""
-
-msgid "and fill out all required fields."
-msgstr ""
-
-msgid "buffered"
-msgstr ""
-
-msgid "cached"
-msgstr ""
-
-msgid "e.g."
-msgstr ""
-
-msgid "free"
-msgstr ""
-
-msgid "to disable it."
-msgstr ""
-
-msgid "used"
-msgstr ""
-
-msgid "wireless settings"
-msgstr ""
diff --git a/po/zh_TW/hd_idle.po b/po/zh_TW/hd_idle.po
deleted file mode 100644
index f4b6853..0000000
--- a/po/zh_TW/hd_idle.po
+++ /dev/null
@@ -1,40 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Disk"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable debug"
-msgstr ""
-
-msgid "Idle-time"
-msgstr ""
-
-msgid "Idle-time unit"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "h"
-msgstr ""
-
-msgid "hd-idle"
-msgstr ""
-
-msgid ""
-"hd-idle is a utility program for spinning-down external disks after a period "
-"of idle time."
-msgstr ""
-
-msgid "min"
-msgstr ""
diff --git a/po/zh_TW/meshwizard.po b/po/zh_TW/meshwizard.po
deleted file mode 100644
index 1d957b3..0000000
--- a/po/zh_TW/meshwizard.po
+++ /dev/null
@@ -1,118 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Activate or deactivate IPv6 config globally."
-msgstr ""
-
-msgid "Channel"
-msgstr ""
-
-msgid "Check this to protect your LAN from other nodes or clients"
-msgstr ""
-
-msgid "Cleanup config"
-msgstr ""
-
-msgid "Configure this interface"
-msgstr ""
-
-msgid "DHCP IP range"
-msgstr ""
-
-msgid "DHCP will automatically assign ip addresses to clients"
-msgstr ""
-
-msgid "Enable DHCP"
-msgstr ""
-
-msgid "Enable RA"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "IPv6 Settings"
-msgstr ""
-
-msgid ""
-"If this is selected then config is cleaned before setting new config options."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Mesh IP address"
-msgstr ""
-
-msgid "Mesh IPv6 address"
-msgstr ""
-
-msgid "Mesh Wizard"
-msgstr ""
-
-msgid ""
-"Note: this will setup this interface for mesh operation, i.e. add to zone "
-"'freifunk' and enable olsr."
-msgstr ""
-
-msgid "Protect LAN"
-msgstr ""
-
-msgid ""
-"Select this to allow others to use your connection to access the internet."
-msgstr ""
-
-msgid "Send router advertisements on this device."
-msgstr ""
-
-msgid "Share your internet connection"
-msgstr ""
-
-msgid ""
-"The IP range from which clients are assigned ip addresses (e.g. "
-"10.1.2.1/28). If this is a range inside your mesh network range, then it "
-"will be announced as HNA. Any other range will use NAT. If left empty then "
-"the defaults from the community profile will be used."
-msgstr ""
-
-msgid "The given IP address is not inside the mesh network range"
-msgstr ""
-
-msgid ""
-"This is a unique IPv6 address in CIDR notation (e.g. 2001:1:2:3::1/64) and "
-"has to be registered at your local community."
-msgstr ""
-
-msgid ""
-"This is a unique address in the mesh (e.g. 10.1.1.1) and has to be "
-"registered at your local community."
-msgstr ""
-
-msgid "This will setup a new virtual wireless interface in Access Point mode."
-msgstr ""
-
-msgid ""
-"This wizard will assist you in setting up your router for Freifunk or "
-"another similar wireless community network."
-msgstr ""
-
-msgid "Virtual Access Point (VAP)"
-msgstr ""
-
-msgid "Wizard"
-msgstr ""
-
-msgid "Your device and neighbouring nodes have to use the same channel."
-msgstr ""
-
-msgid "recommended"
-msgstr ""
diff --git a/po/zh_TW/minidlna.po b/po/zh_TW/minidlna.po
deleted file mode 100644
index d1aa66c..0000000
--- a/po/zh_TW/minidlna.po
+++ /dev/null
@@ -1,163 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Album art names:"
-msgstr ""
-
-msgid "Announced model number:"
-msgstr ""
-
-msgid "Announced serial number:"
-msgstr ""
-
-msgid "Browse directory"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Database directory:"
-msgstr ""
-
-msgid "Enable TIVO:"
-msgstr ""
-
-msgid "Enable inotify:"
-msgstr ""
-
-msgid "Enable:"
-msgstr ""
-
-msgid "Friendly name:"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Interfaces:"
-msgstr ""
-
-msgid "Log directory:"
-msgstr ""
-
-msgid "Media directories:"
-msgstr ""
-
-msgid ""
-"MiniDLNA is server software with the aim of being fully compliant with DLNA/"
-"UPnP-AV clients."
-msgstr ""
-
-msgid ""
-"Model number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid "Music"
-msgstr ""
-
-msgid "Network interfaces to serve."
-msgstr ""
-
-msgid "Notify interval in seconds."
-msgstr ""
-
-msgid "Notify interval:"
-msgstr ""
-
-msgid "Pictures"
-msgstr ""
-
-msgid "Port for HTTP (descriptions, SOAP, media transfer) traffic."
-msgstr ""
-
-msgid "Port:"
-msgstr ""
-
-msgid "Presentation URL:"
-msgstr ""
-
-msgid "Root container:"
-msgstr ""
-
-msgid ""
-"Serial number the miniDLNA daemon will report to clients in its XML "
-"description."
-msgstr ""
-
-msgid ""
-"Set this if you want to customize the name that shows up on your clients."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its database and album art cache."
-msgstr ""
-
-msgid ""
-"Set this if you would like to specify the directory where you want MiniDLNA "
-"to store its log file."
-msgstr ""
-
-msgid ""
-"Set this to enable inotify monitoring to automatically discover new files."
-msgstr ""
-
-msgid ""
-"Set this to enable support for streaming .jpg and .mp3 files to a TiVo "
-"supporting HMO."
-msgstr ""
-
-msgid ""
-"Set this to strictly adhere to DLNA standards. This will allow server-side "
-"downscaling of very large JPEG images, which may hurt JPEG serving "
-"performance on (at least) Sony DLNA products."
-msgstr ""
-
-msgid ""
-"Set this to the directory you want scanned. If you want to restrict the "
-"directory to a specific content type, you can prepend the type ('A' for "
-"audio, 'V' for video, 'P' for images), followed by a comma, to the directory "
-"(eg. media_dir=A,/mnt/media/Music). Multiple directories can be specified."
-msgstr ""
-
-msgid "Specify the path to the MiniSSDPd socket."
-msgstr ""
-
-msgid "Standard container"
-msgstr ""
-
-msgid "Strict to DLNA standard:"
-msgstr ""
-
-msgid ""
-"The miniDLNA service is active, serving %d audio, %d video and %d image "
-"files."
-msgstr ""
-
-msgid "The miniDLNA service is not running."
-msgstr ""
-
-msgid "This is a list of file names to check for when searching for album art."
-msgstr ""
-
-msgid "Video"
-msgstr ""
-
-msgid "miniDLNA"
-msgstr ""
-
-msgid "miniDLNA Status"
-msgstr ""
-
-msgid "miniSSDP socket:"
-msgstr ""
diff --git a/po/zh_TW/mmc_over_gpio.po b/po/zh_TW/mmc_over_gpio.po
deleted file mode 100644
index 76ccd90..0000000
--- a/po/zh_TW/mmc_over_gpio.po
+++ /dev/null
@@ -1,35 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "CLK_pin"
-msgstr ""
-
-msgid "CS_pin"
-msgstr ""
-
-msgid "DI_pin"
-msgstr ""
-
-msgid "DO_pin"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "MMC/SD driver configuration"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
diff --git a/po/zh_TW/multiwan.po b/po/zh_TW/multiwan.po
deleted file mode 100644
index 7f02389..0000000
--- a/po/zh_TW/multiwan.po
+++ /dev/null
@@ -1,114 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Attempts Before WAN Failover"
-msgstr ""
-
-msgid "Attempts Before WAN Recovery"
-msgstr ""
-
-msgid "Auto"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid ""
-"Configure rules for directing outbound traffic through specified WAN Uplinks."
-msgstr ""
-
-msgid "DNS Server(s)"
-msgstr ""
-
-msgid "Default Route"
-msgstr ""
-
-msgid "Destination Address"
-msgstr ""
-
-msgid "Disable"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Failing"
-msgstr ""
-
-msgid "Failover Traffic Destination"
-msgstr ""
-
-msgid "Health Monitor ICMP Host(s)"
-msgstr ""
-
-msgid "Health Monitor ICMP Timeout"
-msgstr ""
-
-msgid "Health Monitor Interval"
-msgstr ""
-
-msgid ""
-"Health Monitor detects and corrects network changes and failed connections."
-msgstr ""
-
-msgid "KO"
-msgstr ""
-
-msgid "Load Balancer Distribution"
-msgstr ""
-
-msgid "Load Balancer(Compatibility)"
-msgstr ""
-
-msgid "Load Balancer(Performance)"
-msgstr ""
-
-msgid "Multi-WAN"
-msgstr ""
-
-msgid "Multi-WAN Status"
-msgstr ""
-
-msgid "Multi-WAN Traffic Rules"
-msgstr ""
-
-msgid ""
-"Multi-WAN allows for the use of multiple uplinks for load balancing and "
-"failover."
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid "OK"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Recovering"
-msgstr ""
-
-msgid "Source Address"
-msgstr ""
-
-msgid "Unknown"
-msgstr ""
-
-msgid "WAN Interfaces"
-msgstr ""
-
-msgid "WAN Uplink"
-msgstr ""
-
-msgid "all"
-msgstr ""
diff --git a/po/zh_TW/ntpc.po b/po/zh_TW/ntpc.po
deleted file mode 100644
index 5b1ead1..0000000
--- a/po/zh_TW/ntpc.po
+++ /dev/null
@@ -1,47 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Clock Adjustment"
-msgstr ""
-
-msgid "Count of time measurements"
-msgstr ""
-
-msgid "Current system time"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Offset frequency"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Synchronizes the system time"
-msgstr ""
-
-msgid "Time Server"
-msgstr ""
-
-msgid "Time Servers"
-msgstr ""
-
-msgid "Time Synchronisation"
-msgstr ""
-
-msgid "Update interval (in seconds)"
-msgstr ""
-
-msgid "empty = infinite"
-msgstr ""
diff --git a/po/zh_TW/olsr.po b/po/zh_TW/olsr.po
deleted file mode 100644
index 620346d..0000000
--- a/po/zh_TW/olsr.po
+++ /dev/null
@@ -1,575 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Active MID announcements"
-msgstr ""
-
-msgid "Active OLSR nodes"
-msgstr ""
-
-msgid "Active host net announcements"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow gateways with NAT"
-msgstr ""
-
-msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
-msgstr ""
-
-msgid "Announce uplink"
-msgstr ""
-
-msgid "Announced network"
-msgstr ""
-
-msgid "Both values must use the dotted decimal notation."
-msgstr ""
-
-msgid "Broadcast address"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid "Display"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download Config"
-msgstr ""
-
-msgid "ETX"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid ""
-"Enable SmartGateway. If it is disabled, then all other SmartGateway "
-"parameters are ignored. Default is \"no\"."
-msgstr ""
-
-msgid "Enable this interface."
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Expected retransmission count"
-msgstr ""
-
-msgid "FIB metric"
-msgstr ""
-
-msgid ""
-"FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
-"means that the metric value is always 2. This is the preferred value because "
-"it helps the linux kernel routing to clean up older routes. \"correct\" uses "
-"the hopcount as the metric value. \"approx\" use the hopcount as the metric "
-"value too, but does only update the hopcount if the nexthop changes too. "
-"Default is \"flat\"."
-msgstr ""
-
-msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
-msgstr ""
-
-msgid "Gateway"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "HNA"
-msgstr ""
-
-msgid "HNA Announcements"
-msgstr ""
-
-msgid "HNA interval"
-msgstr ""
-
-msgid "HNA validity time"
-msgstr ""
-
-msgid "Hello"
-msgstr ""
-
-msgid "Hello interval"
-msgstr ""
-
-msgid "Hello validity time"
-msgstr ""
-
-msgid "Hna4"
-msgstr ""
-
-msgid "Hna6"
-msgstr ""
-
-msgid "Hops"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts in a OLSR routed network can announce connecitivity to external "
-"networks using HNA messages."
-msgstr ""
-
-msgid ""
-"Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
-"robustness to the link sensing but delays neighbor registration. Defaults is "
-"\"yes\""
-msgstr ""
-
-msgid "IP Addresses"
-msgstr ""
-
-msgid ""
-"IP-version to use. If 6and4 is selected then one olsrd instance is started "
-"for each protocol."
-msgstr ""
-
-msgid "IPv4"
-msgstr ""
-
-msgid "IPv4 broadcast"
-msgstr ""
-
-msgid ""
-"IPv4 broadcast address for outgoing OLSR packets. One useful example would "
-"be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
-"interface broadcast IP."
-msgstr ""
-
-msgid "IPv4 source"
-msgstr ""
-
-msgid ""
-"IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
-"triggers usage of the interface IP."
-msgstr ""
-
-msgid "IPv6"
-msgstr ""
-
-msgid "IPv6 multicast"
-msgstr ""
-
-msgid ""
-"IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
-"multicast."
-msgstr ""
-
-msgid ""
-"IPv6 network must be given in full notation, prefix must be in CIDR notation."
-msgstr ""
-
-msgid "IPv6 source"
-msgstr ""
-
-msgid ""
-"IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
-"the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
-"of a not-linklocal interface IP."
-msgstr ""
-
-msgid "IPv6-Prefix of the uplink"
-msgstr ""
-
-msgid ""
-"If the route to the current gateway is to be changed, the ETX value of this "
-"gateway is multiplied with this value before it is compared to the new one. "
-"The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
-"if changed.<br /><b>WARNING:</b> This parameter should not be used together "
-"with the etx_ffeth metric!<br />Defaults to \"1.0\"."
-msgstr ""
-
-msgid ""
-"If this Node uses NAT for connections to the internet. Default is \"yes\"."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid ""
-"Interface Mode is used to prevent unnecessary packet forwarding on switched "
-"ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
-"\"mesh\"."
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces Defaults"
-msgstr ""
-
-msgid "Internet protocol"
-msgstr ""
-
-msgid ""
-"Interval to poll network interfaces for configuration changes (in seconds). "
-"Default is \"2.5\"."
-msgstr ""
-
-msgid "Known OLSR routes"
-msgstr ""
-
-msgid "LQ"
-msgstr ""
-
-msgid "LQ aging"
-msgstr ""
-
-msgid "LQ algorithm"
-msgstr ""
-
-msgid "LQ fisheye"
-msgstr ""
-
-msgid "LQ level"
-msgstr ""
-
-msgid "Last hop"
-msgstr ""
-
-msgid "Legend"
-msgstr ""
-
-msgid "Library"
-msgstr ""
-
-msgid "Link Quality Settings"
-msgstr ""
-
-msgid ""
-"Link quality aging factor (only for lq level 2). Tuning parameter for "
-"etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
-"(allowed values are between 0.01 and 1.0)"
-msgstr ""
-
-msgid ""
-"Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
-"floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
-"etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
-"etx variant which use all OLSR traffic (instead of only hellos) for ETX "
-"calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
-"allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
-msgstr ""
-
-msgid ""
-"Link quality level switch between hopcount and cost-based (mostly ETX) "
-"routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
-"quality for MPR selection and routing<br />Default is \"2\""
-msgstr ""
-
-msgid "LinkQuality Multiplicator"
-msgstr ""
-
-msgid "Links per node (average)"
-msgstr ""
-
-msgid "Links total"
-msgstr ""
-
-msgid "Local interface IP"
-msgstr ""
-
-msgid "MID"
-msgstr ""
-
-msgid "MID interval"
-msgstr ""
-
-msgid "MID validity time"
-msgstr ""
-
-msgid "MTU"
-msgstr ""
-
-msgid "Main IP"
-msgstr ""
-
-msgid ""
-"Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
-"configured on port 2006 and accepts connections from \"127.0.0.1\"."
-msgstr ""
-
-msgid "Metric"
-msgstr ""
-
-msgid "Mode"
-msgstr ""
-
-msgid ""
-"Multiply routes with the factor given here. Allowed values are between 0.01 "
-"and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
-">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
-"nodes on this interface by 20%: default 0.8"
-msgstr ""
-
-msgid "NAT threshold"
-msgstr ""
-
-msgid "NLQ"
-msgstr ""
-
-msgid "Neighbors"
-msgstr ""
-
-msgid "Neighbour IP"
-msgstr ""
-
-msgid "Neighbours"
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network address"
-msgstr ""
-
-msgid "Nic changes poll interval"
-msgstr ""
-
-msgid "Nodes"
-msgstr ""
-
-msgid "OLSR"
-msgstr ""
-
-msgid "OLSR - Display Options"
-msgstr ""
-
-msgid "OLSR - HNA-Announcements"
-msgstr ""
-
-msgid "OLSR - Plugins"
-msgstr ""
-
-msgid "OLSR Daemon"
-msgstr ""
-
-msgid "OLSR Daemon - Interface"
-msgstr ""
-
-msgid "OLSR connections"
-msgstr ""
-
-msgid "OLSR gateway"
-msgstr ""
-
-msgid "OLSR node"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "Overview of currently active OLSR host net announcements"
-msgstr ""
-
-msgid "Overview of currently established OLSR connections"
-msgstr ""
-
-msgid "Overview of currently known OLSR nodes"
-msgstr ""
-
-msgid "Overview of currently known routes to other OLSR nodes"
-msgstr ""
-
-msgid "Overview of interfaces where OLSR is running"
-msgstr ""
-
-msgid "Overview of known multiple interface announcements"
-msgstr ""
-
-msgid "Overview of smart gateways in this network"
-msgstr ""
-
-msgid "Plugin configuration"
-msgstr ""
-
-msgid "Plugins"
-msgstr ""
-
-msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
-msgstr ""
-
-msgid "Pollrate"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Resolve"
-msgstr ""
-
-msgid ""
-"Resolve hostnames on status pages. It is generally safe to allow this, but "
-"if you use public IPs and have unstable DNS-Setup then those pages will load "
-"really slow. In this case disable it here."
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Secondary OLSR interfaces"
-msgstr ""
-
-msgid ""
-"Sets the main IP (originator ip) of the router. This IP will NEVER change "
-"during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
-"IP of the first interface."
-msgstr ""
-
-msgid "SmartGW"
-msgstr ""
-
-msgid "SmartGW announcements"
-msgstr ""
-
-msgid "SmartGateway is not configured on this system."
-msgstr ""
-
-msgid "Source address"
-msgstr ""
-
-msgid ""
-"Specifies the speed of the uplink in kilobits/s. First parameter is "
-"upstream, second parameter is downstream. Default is \"128 1024\"."
-msgstr ""
-
-msgid "Speed of the uplink"
-msgstr ""
-
-msgid "State"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Success rate of packages received from the neighbour"
-msgstr ""
-
-msgid "Success rate of packages sent to the neighbour"
-msgstr ""
-
-msgid "TC"
-msgstr ""
-
-msgid "TC interval"
-msgstr ""
-
-msgid "TC validity time"
-msgstr ""
-
-msgid "TOS value"
-msgstr ""
-
-msgid ""
-"The OLSR daemon is an implementation of the Optimized Link State Routing "
-"protocol. As such it allows mesh routing for any network equipment. It runs "
-"on any wifi card that supports ad-hoc mode and of course on any ethernet "
-"device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
-"documentation."
-msgstr ""
-
-msgid ""
-"The fixed willingness to use. If not set willingness will be calculated "
-"dynamically based on battery/power status. Default is \"3\"."
-msgstr ""
-
-msgid "The interface OLSRd should serve."
-msgstr ""
-
-msgid ""
-"The port OLSR uses. This should usually stay at the IANA assigned port 698. "
-"It can have a value between 1 and 65535."
-msgstr ""
-
-msgid ""
-"This can be used to signal the external IPv6 prefix of the uplink to the "
-"clients. This might allow a client to change it's local IPv6 address to use "
-"the IPv6 gateway without any kind of address translation. The maximum prefix "
-"length is 64 bits. Default is \"::/0\" (no prefix)."
-msgstr ""
-
-msgid "Timing and Validity"
-msgstr ""
-
-msgid "Topology"
-msgstr ""
-
-msgid ""
-"Type of service value for the IP header of control traffic. Default is \"16"
-"\"."
-msgstr ""
-
-msgid "Unable to connect to the OLSR daemon!"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Uplink uses NAT"
-msgstr ""
-
-msgid "Use hysteresis"
-msgstr ""
-
-msgid "Version"
-msgstr ""
-
-msgid "WLAN"
-msgstr ""
-
-msgid ""
-"Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
-"work, please install it."
-msgstr ""
-
-msgid "Weight"
-msgstr ""
-
-msgid ""
-"When multiple links exist between hosts the weight of interface is used to "
-"determine the link to use. Normally the weight is automatically calculated "
-"by olsrd based on the characteristics of the interface, but here you can "
-"specify a fixed value. Olsrd will choose links with the lowest value.<br /"
-"><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
-"0. For any other value of LinkQualityLevel, the interface ETX value is used "
-"instead."
-msgstr ""
-
-msgid ""
-"Which kind of uplink is exported to the other mesh nodes. An uplink is "
-"detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
-"Default setting is \"both\"."
-msgstr ""
-
-msgid "Willingness"
-msgstr ""
diff --git a/po/zh_TW/openvpn.po b/po/zh_TW/openvpn.po
deleted file mode 100644
index bddb9c7..0000000
--- a/po/zh_TW/openvpn.po
+++ /dev/null
@@ -1,545 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "%s"
-msgstr ""
-
-msgid "'net30', 'p2p', or 'subnet'"
-msgstr ""
-
-msgid "Accept options pushed from server"
-msgstr ""
-
-msgid "Add"
-msgstr ""
-
-msgid "Add route after establishing connection"
-msgstr ""
-
-msgid "Additional authentication over TLS"
-msgstr ""
-
-msgid "Allow client-to-client traffic"
-msgstr ""
-
-msgid "Allow multiple clients with same certificate"
-msgstr ""
-
-msgid "Allow only one session"
-msgstr ""
-
-msgid "Allow remote to change its IP or port"
-msgstr ""
-
-msgid "Allowed maximum of connected clients"
-msgstr ""
-
-msgid "Allowed maximum of internal"
-msgstr ""
-
-msgid "Allowed maximum of new connections"
-msgstr ""
-
-msgid "Append log to file"
-msgstr ""
-
-msgid "Authenticate using username/password"
-msgstr ""
-
-msgid "Automatically redirect default route"
-msgstr ""
-
-msgid "Below is a list of configured OpenVPN instances and their current state"
-msgstr ""
-
-msgid "Call down cmd/script before TUN/TAP close"
-msgstr ""
-
-msgid "Certificate authority"
-msgstr ""
-
-msgid "Change process priority"
-msgstr ""
-
-msgid "Change to directory before initialization"
-msgstr ""
-
-msgid "Check peer certificate against a CRL"
-msgstr ""
-
-msgid "Chroot to directory after initialization"
-msgstr ""
-
-msgid "Client is disabled"
-msgstr ""
-
-msgid "Configuration category"
-msgstr ""
-
-msgid "Configure client mode"
-msgstr ""
-
-msgid "Configure server bridge"
-msgstr ""
-
-msgid "Configure server mode"
-msgstr ""
-
-msgid "Connect through Socks5 proxy"
-msgstr ""
-
-msgid "Connect to remote host through an HTTP proxy"
-msgstr ""
-
-msgid "Connection retry interval"
-msgstr ""
-
-msgid "Cryptography"
-msgstr ""
-
-msgid "Daemonize after initialization"
-msgstr ""
-
-msgid "Delay n seconds after connection"
-msgstr ""
-
-msgid "Delay tun/tap open and up script execution"
-msgstr ""
-
-msgid "Diffie Hellman parameters"
-msgstr ""
-
-msgid "Directory for custom client config files"
-msgstr ""
-
-msgid "Disable Paging"
-msgstr ""
-
-msgid "Disable cipher initialisation vector"
-msgstr ""
-
-msgid "Disable options consistency check"
-msgstr ""
-
-msgid "Disable replay protection"
-msgstr ""
-
-msgid "Do not bind to local address and port"
-msgstr ""
-
-msgid "Don't actually execute ifconfig"
-msgstr ""
-
-msgid "Don't add routes automatically"
-msgstr ""
-
-msgid "Don't cache --askpass or --auth-user-pass passwords"
-msgstr ""
-
-msgid "Don't inherit global push options"
-msgstr ""
-
-msgid "Don't log timestamps"
-msgstr ""
-
-msgid "Don't re-read key on restart"
-msgstr ""
-
-msgid "Don't require client certificate"
-msgstr ""
-
-msgid "Don't use adaptive lzo compression"
-msgstr ""
-
-msgid "Don't warn on ifconfig inconsistencies"
-msgstr ""
-
-msgid "Echo parameters to log"
-msgstr ""
-
-msgid "Empirically measure MTU"
-msgstr ""
-
-msgid "Enable OpenSSL hardware crypto engines"
-msgstr ""
-
-msgid "Enable Path MTU discovery"
-msgstr ""
-
-msgid "Enable Static Key encryption mode (non-TLS)"
-msgstr ""
-
-msgid "Enable TLS and assume client role"
-msgstr ""
-
-msgid "Enable TLS and assume server role"
-msgstr ""
-
-msgid "Enable internal datagram fragmentation"
-msgstr ""
-
-msgid "Enable management interface on <em>IP</em> <em>port</em>"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption cipher for packets"
-msgstr ""
-
-msgid "Execute shell cmd after routes are added"
-msgstr ""
-
-msgid "Execute shell command on remote ip change"
-msgstr ""
-
-msgid ""
-"Executed in server mode on new client connections, when the client is still "
-"untrusted"
-msgstr ""
-
-msgid ""
-"Executed in server mode whenever an IPv4 address/route or MAC address is "
-"added to OpenVPN's internal routing table"
-msgstr ""
-
-msgid "Exit on TLS negotiation failure"
-msgstr ""
-
-msgid "Get PEM password from controlling tty before we daemonize"
-msgstr ""
-
-msgid "HMAC authentication for packets"
-msgstr ""
-
-msgid "Handling of authentication failures"
-msgstr ""
-
-msgid ""
-"Helper directive to simplify the expression of --ping and --ping-restart in "
-"server mode configurations"
-msgstr ""
-
-msgid "If hostname resolve fails, retry"
-msgstr ""
-
-msgid "Instance \"%s\""
-msgstr ""
-
-msgid "Invalid"
-msgstr ""
-
-msgid "Keep local IP address on restart"
-msgstr ""
-
-msgid "Keep remote IP address on restart"
-msgstr ""
-
-msgid "Keep tun/tap device open on restart"
-msgstr ""
-
-msgid "Key transition window"
-msgstr ""
-
-msgid "Limit repeated log messages"
-msgstr ""
-
-msgid "Local certificate"
-msgstr ""
-
-msgid "Local host name or ip address"
-msgstr ""
-
-msgid "Local private key"
-msgstr ""
-
-msgid "Major mode"
-msgstr ""
-
-msgid "Make tun device IPv6 capable"
-msgstr ""
-
-msgid "Maximum number of queued TCP output packets"
-msgstr ""
-
-msgid "Networking"
-msgstr ""
-
-msgid "Number of allocated broadcast buffers"
-msgstr ""
-
-msgid "Number of lines for log file history"
-msgstr ""
-
-msgid "Only accept connections from given X509 name"
-msgstr ""
-
-msgid "Only process ping timeouts if routes exist"
-msgstr ""
-
-msgid "OpenVPN"
-msgstr ""
-
-msgid "OpenVPN instances"
-msgstr ""
-
-msgid "Optimize TUN/TAP/UDP writes"
-msgstr ""
-
-msgid "Output to syslog and do not daemonize"
-msgstr ""
-
-msgid "Overview"
-msgstr ""
-
-msgid "PKCS#12 file containing keys"
-msgstr ""
-
-msgid "Pass environment variables to script"
-msgstr ""
-
-msgid "Persist replay-protection state"
-msgstr ""
-
-msgid "Persist/unpersist ifconfig-pool"
-msgstr ""
-
-msgid "Ping remote every n seconds over TCP/UDP port"
-msgstr ""
-
-msgid "Policy level over usage of external programs and scripts"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Proxy timeout in seconds"
-msgstr ""
-
-msgid "Push an ifconfig option to remote"
-msgstr ""
-
-msgid "Push options to peer"
-msgstr ""
-
-msgid "Query management channel for private key"
-msgstr ""
-
-msgid "Randomly choose remote server"
-msgstr ""
-
-msgid "Refuse connection if no custom client config"
-msgstr ""
-
-msgid "Remap SIGUSR1 signals"
-msgstr ""
-
-msgid "Remote host name or ip address"
-msgstr ""
-
-msgid "Remote ping timeout"
-msgstr ""
-
-msgid "Renegotiate data chan. key after bytes"
-msgstr ""
-
-msgid "Renegotiate data chan. key after packets"
-msgstr ""
-
-msgid "Renegotiate data chan. key after seconds"
-msgstr ""
-
-msgid "Replay protection sliding window size"
-msgstr ""
-
-msgid "Require explicit designation on certificate"
-msgstr ""
-
-msgid "Require explicit key usage on certificate"
-msgstr ""
-
-msgid "Restart after remote ping timeout"
-msgstr ""
-
-msgid "Retransmit timeout on TLS control channel"
-msgstr ""
-
-msgid "Retry indefinitely on HTTP proxy errors"
-msgstr ""
-
-msgid "Retry indefinitely on Socks proxy errors"
-msgstr ""
-
-msgid "Route subnet to client"
-msgstr ""
-
-msgid "Run as an inetd or xinetd server"
-msgstr ""
-
-msgid "Run script cmd on client connection"
-msgstr ""
-
-msgid "Run script cmd on client disconnection"
-msgstr ""
-
-msgid "Run up/down scripts for all restarts"
-msgstr ""
-
-msgid "Send notification to peer on disconnect"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Set GID to group"
-msgstr ""
-
-msgid "Set TCP/UDP MTU"
-msgstr ""
-
-msgid "Set UID to user"
-msgstr ""
-
-msgid "Set aside a pool of subnets"
-msgstr ""
-
-msgid "Set extended HTTP proxy options"
-msgstr ""
-
-msgid "Set output verbosity"
-msgstr ""
-
-msgid "Set size of real and virtual address hash tables"
-msgstr ""
-
-msgid "Set the TCP/UDP receive buffer size"
-msgstr ""
-
-msgid "Set the TCP/UDP send buffer size"
-msgstr ""
-
-msgid "Set tun/tap TX queue length"
-msgstr ""
-
-msgid "Set tun/tap adapter parameters"
-msgstr ""
-
-msgid "Set tun/tap device MTU"
-msgstr ""
-
-msgid "Set tun/tap device overhead"
-msgstr ""
-
-msgid "Set upper bound on TCP MSS"
-msgstr ""
-
-msgid "Shaping for peer bandwidth"
-msgstr ""
-
-msgid "Shell cmd to execute after tun device open"
-msgstr ""
-
-msgid "Shell cmd to run after tun device close"
-msgstr ""
-
-msgid "Shell command to verify X509 name"
-msgstr ""
-
-msgid "Silence the output of replay warnings"
-msgstr ""
-
-msgid "Size of cipher key"
-msgstr ""
-
-msgid "Specify a default gateway for routes"
-msgstr ""
-
-msgid "Start OpenVPN in a hibernating state"
-msgstr ""
-
-msgid "Start/Stop"
-msgstr ""
-
-msgid "Started"
-msgstr ""
-
-msgid "Status file format version"
-msgstr ""
-
-msgid "Switch to advanced configuration »"
-msgstr ""
-
-msgid "TCP/UDP port # for both local and remote"
-msgstr ""
-
-msgid "TCP/UDP port # for local (default=1194)"
-msgstr ""
-
-msgid "TCP/UDP port # for remote (default=1194)"
-msgstr ""
-
-msgid "TLS cipher"
-msgstr ""
-
-msgid "TOS passthrough (applies to IPv4 only)"
-msgstr ""
-
-msgid "Temporary directory for client-connect return file"
-msgstr ""
-
-msgid "Timeframe for key exchange"
-msgstr ""
-
-msgid "Type of used device"
-msgstr ""
-
-msgid "Use fast LZO compression"
-msgstr ""
-
-msgid "Use individual addresses rather than /30 subnets"
-msgstr ""
-
-msgid "Use protocol"
-msgstr ""
-
-msgid "Use tun/tap device node"
-msgstr ""
-
-msgid "Use username as common name"
-msgstr ""
-
-msgid "VPN"
-msgstr ""
-
-msgid "Write log to file"
-msgstr ""
-
-msgid "Write process ID to file"
-msgstr ""
-
-msgid "Write status to file every n seconds"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "tun/tap device"
-msgstr ""
-
-msgid "tun/tap inactivity timeout"
-msgstr ""
-
-msgid "yes (%i)"
-msgstr ""
-
-msgid "« Switch to basic configuration"
-msgstr ""
diff --git a/po/zh_TW/p2pblock.po b/po/zh_TW/p2pblock.po
deleted file mode 100644
index a8c09b4..0000000
--- a/po/zh_TW/p2pblock.po
+++ /dev/null
@@ -1,37 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Block Time"
-msgstr ""
-
-msgid "Enable P2P-Block"
-msgstr ""
-
-msgid "IP-P2P"
-msgstr ""
-
-msgid "Layer7-Protocols"
-msgstr ""
-
-msgid "P2P-Block"
-msgstr ""
-
-msgid ""
-"P2P-Block is a greylisting mechanism to block various peer-to-peer protocols "
-"for non-whitelisted clients."
-msgstr ""
-
-msgid "Portrange"
-msgstr ""
-
-msgid "Whitelisted IPs"
-msgstr ""
-
-msgid "seconds"
-msgstr ""
diff --git a/po/zh_TW/p910nd.po b/po/zh_TW/p910nd.po
deleted file mode 100644
index d8b1b32..0000000
--- a/po/zh_TW/p910nd.po
+++ /dev/null
@@ -1,34 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Bidirectional mode"
-msgstr ""
-
-msgid "Device"
-msgstr ""
-
-msgid ""
-"First you have to install the packages to get support for USB (kmod-usb-"
-"printer) or parallel port (kmod-lp)."
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "TCP listener port."
-msgstr ""
-
-msgid "enable"
-msgstr ""
-
-msgid "p910nd - Printer server"
-msgstr ""
diff --git a/po/zh_TW/pbx-voicemail.po b/po/zh_TW/pbx-voicemail.po
deleted file mode 100644
index a933faf..0000000
--- a/po/zh_TW/pbx-voicemail.po
+++ /dev/null
@@ -1,87 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Email Addresses that Receive Voicemail"
-msgstr ""
-
-msgid "Enable Voicemail"
-msgstr ""
-
-msgid "Global Voicemail Setup"
-msgstr ""
-
-msgid ""
-"Here you can configure a global voicemail for this PBX. Since this system is "
-"intended to run on embedded systems like routers, there is no local storage "
-"of voicemail - it must be sent out by email. Therefore you need to configure "
-"an outgoing mail (SMTP) server (for example your ISP's, Google's, or Yahoo's "
-"SMTP server), and provide a list of addresses that receive recorded "
-"voicemail."
-msgstr ""
-
-msgid ""
-"In order for this PBX to send emails containing voicemail recordings, you "
-"need to set up an SMTP server here. Your ISP usually provides an SMTP server "
-"for that purpose. You can also set up a third party SMTP server such as the "
-"one provided by Google or Yahoo."
-msgstr ""
-
-msgid "Last Sent Voicemail Log"
-msgstr ""
-
-msgid "Local Storage Directory"
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Outgoing mail (SMTP) Server"
-msgstr ""
-
-msgid "SMTP Password"
-msgstr ""
-
-msgid "SMTP Port Number"
-msgstr ""
-
-msgid "SMTP Server Authentication"
-msgstr ""
-
-msgid "SMTP Server Hostname or IP Address"
-msgstr ""
-
-msgid "SMTP User Name"
-msgstr ""
-
-msgid "Secure Connection Using TLS"
-msgstr ""
-
-msgid "Voicemail Setup"
-msgstr ""
-
-msgid ""
-"When you enable voicemail, you will have the opportunity to specify email "
-"addresses that receive recorded voicemail. You must also set up an SMTP "
-"server below."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can also retain copies of voicemail messages on the device running your "
-"PBX. The path specified here will be created if it doesn't exist. Beware of "
-"limited space on embedded devices like routers, and enable this option only "
-"if you know what you are doing."
-msgstr ""
-
-msgid ""
-"Your real SMTP password is not shown for your protection. It will be changed "
-"only when you change the value in this box."
-msgstr ""
diff --git a/po/zh_TW/pbx.po b/po/zh_TW/pbx.po
deleted file mode 100644
index 774f284..0000000
--- a/po/zh_TW/pbx.po
+++ /dev/null
@@ -1,448 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Available"
-msgstr ""
-
-msgid ""
-"Avoid using anything but alpha-numeric characters, space, comma, and period."
-msgstr ""
-
-msgid "Away"
-msgstr ""
-
-msgid "Blacklisted Numbers"
-msgstr ""
-
-msgid "Call Routing"
-msgstr ""
-
-msgid "Call-through Numbers"
-msgstr ""
-
-msgid "Copy-paste large lists of numbers here."
-msgstr ""
-
-msgid ""
-"Designate numbers that are allowed to call through this system and which "
-"user's privileges it will have."
-msgstr ""
-
-msgid "Dials numbers unmatched elsewhere"
-msgstr ""
-
-msgid "Do Not Disturb"
-msgstr ""
-
-msgid "Domain/IP Address/Dynamic Domain"
-msgstr ""
-
-msgid "Dynamic List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable Incoming Calls (Register via SIP)"
-msgstr ""
-
-msgid "Enable Incoming Calls (set Status below)"
-msgstr ""
-
-msgid "Enable Outgoing Calls"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid ""
-"Enter phone numbers that you want to decline calls from automatically. You "
-"should probably omit the country code and any leading zeroes, but please "
-"experiment to make sure you are blocking numbers from your desired area "
-"successfully."
-msgstr ""
-
-msgid ""
-"Enter this IP (or IP:port) in the Server/Registrar setting of SIP devices "
-"you will use ONLY locally and never from a remote location."
-msgstr ""
-
-msgid ""
-"Enter this hostname (or hostname:port) in the Server/Registrar setting of "
-"SIP devices you will use from a remote location (they will work locally too)."
-msgstr ""
-
-msgid "External SIP Port"
-msgstr ""
-
-msgid ""
-"For each provider enabled for incoming calls, here you can restrict which "
-"users to ring on incoming calls. If the list is empty, the system will "
-"indicate that all users enabled for incoming calls will ring. Invalid "
-"usernames will be rejected silently. Also, entering a username here "
-"overrides the user's setting to not receive incoming calls. This way, you "
-"can make certain users ring only for specific providers. Entries can be made "
-"in a space-separated list, and/or one per line by hitting enter after every "
-"one."
-msgstr ""
-
-msgid ""
-"For each user enabled for outgoing calls you can restrict what providers the "
-"user can use for outgoing calls. By default all users can use all providers. "
-"To show up in the list below the user should be allowed to make outgoing "
-"calls in the \"User Accounts\" page. Enter VoIP providers in the format "
-"username@some.host.name, as listed in \"Outgoing Calls\" above. It's easiest "
-"to copy and paste the providers from above. Invalid entries, including "
-"providers not enabled for outgoing calls, will be rejected silently. Entries "
-"can be made in a space-separated list, and/or one per line by hitting enter "
-"after every one."
-msgstr ""
-
-msgid "Full Name"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Google Accounts"
-msgstr ""
-
-msgid "Google Talk Status"
-msgstr ""
-
-msgid "Google Talk Status Message"
-msgstr ""
-
-msgid "Google Voice/Talk Accounts"
-msgstr ""
-
-msgid ""
-"Here you must configure at least one SIP account, that you will use to "
-"register with this service. Use this account either in an Analog Telephony "
-"Adapter (ATA), or in a SIP software like CSipSimple, Linphone, or Sipdroid "
-"on your smartphone, or Ekiga, Linphone, or X-Lite on your computer. By "
-"default, all SIP accounts will ring simultaneously if a call is made to one "
-"of your VoIP provider accounts or GV numbers."
-msgstr ""
-
-msgid ""
-"If setting Server/Registrar to %s or %s does not work for you, try setting "
-"it to %s or %s and entering this port number in a separate field that "
-"specifies the Server/Registrar port number. Beware that some devices have a "
-"confusing setting that sets the port where SIP requests originate from on "
-"the SIP device itself (the bind port). The port specified on this page is "
-"NOT this bind port but the port this service listens on."
-msgstr ""
-
-msgid ""
-"If you experience jittery or high latency audio during heavy downloads, you "
-"may want to enable QoS. QoS prioritizes traffic to and from your network for "
-"specified ports and IP addresses, resulting in better latency and throughput "
-"for sound in our case. If enabled below, a QoS rule for this service will be "
-"configured by the PBX automatically, but you must visit the QoS "
-"configuration page (Network->QoS) to configure other critical QoS settings "
-"like Download and Upload speed."
-msgstr ""
-
-msgid ""
-"If you have more than one account that can make outgoing calls, you should "
-"enter a list of phone numbers and/or prefixes in the following fields for "
-"each provider listed. Invalid prefixes are removed silently, and only 0-9, "
-"X, Z, N, #, *, and + are valid characters. The letter X matches 0-9, Z "
-"matches 1-9, and N matches 2-9. For example to make calls to Germany through "
-"a provider, you can enter 49. To make calls to North America, you can enter "
-"1NXXNXXXXXX. If one of your providers can make \"local\" calls to an area "
-"code like New York's 646, you can enter 646NXXXXXX for that provider. You "
-"should leave one account with an empty list to make calls with it by "
-"default, if no other provider's prefixes match. The system will "
-"automatically replace an empty list with a message that the provider dials "
-"all numbers not matched by another provider's prefixes. Be as specific as "
-"possible (i.e. 1NXXNXXXXXX is better than 1). Please note all international "
-"dial codes are discarded (e.g. 00, 011, 010, 0011). Entries can be made in a "
-"space-separated list, and/or one per line by hitting enter after every one."
-msgstr ""
-
-msgid "Incoming Calls"
-msgstr ""
-
-msgid "Insert QoS Rules"
-msgstr ""
-
-msgid "Makes Outgoing Calls"
-msgstr ""
-
-msgid "NOTE: There are no Google or SIP provider accounts configured."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for incoming "
-"calls."
-msgstr ""
-
-msgid ""
-"NOTE: There are no Google or SIP provider accounts enabled for outgoing "
-"calls."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts configured."
-msgstr ""
-
-msgid "NOTE: There are no local user accounts enabled for outgoing calls."
-msgstr ""
-
-msgid "No"
-msgstr ""
-
-msgid "Number of Seconds to Ring"
-msgstr ""
-
-msgid "Outbound Proxy"
-msgstr ""
-
-msgid "Outgoing Calls"
-msgstr ""
-
-msgid "PBX Main Page"
-msgstr ""
-
-msgid "PBX Service Status"
-msgstr ""
-
-msgid "PIN"
-msgstr ""
-
-msgid "Password"
-msgstr ""
-
-msgid ""
-"Pick a random port number between 6500 and 9500 for the service to listen "
-"on. Do not pick the standard 5060, because it is often subject to brute-"
-"force attacks. When finished, (1) click \"Save and Apply\", and (2) click "
-"the \"Restart VoIP Service\" button above. Finally, (3) look in the \"SIP "
-"Device/Softphone Accounts\" section for updated Server and Port settings for "
-"your SIP Devices/Softphones."
-msgstr ""
-
-msgid "Port Setting for SIP Devices"
-msgstr ""
-
-msgid "Providers Used for Outgoing Calls"
-msgstr ""
-
-msgid "QoS Settings"
-msgstr ""
-
-msgid "RTP Port Range End"
-msgstr ""
-
-msgid "RTP Port Range Start"
-msgstr ""
-
-msgid ""
-"RTP traffic carries actual voice packets. This is the start of the port "
-"range that will be used for setting up RTP communication. It's usually OK to "
-"leave this at the default value."
-msgstr ""
-
-msgid "Receives Incoming Calls"
-msgstr ""
-
-msgid "Remote Usage"
-msgstr ""
-
-msgid "Rings users enabled for incoming calls"
-msgstr ""
-
-msgid "SIP Accounts"
-msgstr ""
-
-msgid "SIP Device/Softphone Accounts"
-msgstr ""
-
-msgid "SIP Provider Accounts"
-msgstr ""
-
-msgid "SIP Realm (needed by some providers)"
-msgstr ""
-
-msgid "SIP Server/Registrar"
-msgstr ""
-
-msgid "SIP Server/Registrar Port"
-msgstr ""
-
-msgid "Server Setting"
-msgstr ""
-
-msgid "Server Setting for Local SIP Devices"
-msgstr ""
-
-msgid "Server Setting for Remote SIP Devices"
-msgstr ""
-
-msgid "Service Status"
-msgstr ""
-
-msgid ""
-"Set the number of seconds to ring users upon incoming calls before hanging "
-"up or going to voicemail, if the voicemail is installed and enabled."
-msgstr ""
-
-msgid "Space-Separated List of Blacklisted Numbers"
-msgstr ""
-
-msgid "Specify numbers individually here. Press enter to add more numbers."
-msgstr ""
-
-msgid ""
-"The number(s) specified above will be able to dial out with this user's "
-"providers. Invalid usernames, including users not enabled for outgoing "
-"calls, are dropped silently. Please verify that the entry was accepted."
-msgstr ""
-
-msgid ""
-"This configuration page allows you to configure a phone system (PBX) service "
-"which permits making phone calls through multiple Google and SIP (like "
-"Sipgate, SipSorcery, and Betamax) accounts and sharing them among many SIP "
-"devices. Note that Google accounts, SIP accounts, and local user accounts "
-"are configured in the \"Google Accounts\", \"SIP Accounts\", and \"User "
-"Accounts\" sub-sections. You must add at least one User Account to this PBX, "
-"and then configure a SIP device or softphone to use the account, in order to "
-"make and receive calls with your Google/SIP accounts. Configuring multiple "
-"users will allow you to make free calls between all users, and share the "
-"configured Google and SIP accounts. If you have more than one Google and SIP "
-"accounts set up, you should probably configure how calls to and from them "
-"are routed in the \"Call Routing\" page. If you're interested in using your "
-"own PBX from anywhere in the world, then visit the \"Remote Usage\" section "
-"in the \"Advanced Settings\" page."
-msgstr ""
-
-msgid ""
-"This is the name that the VoIP server will use to identify itself when "
-"registering to VoIP (SIP) providers. Some providers require this to a "
-"specific string matching a hardware SIP device."
-msgstr ""
-
-msgid ""
-"This is where you indicate which Google/SIP accounts are used to call what "
-"country/area codes, which users can use what SIP/Google accounts, how "
-"incoming calls are routed, what numbers can get into this PBX with a "
-"password, and what numbers are blacklisted."
-msgstr ""
-
-msgid ""
-"This is where you set up your Google (Talk and Voice) Accounts, in order to "
-"start using them for dialing and receiving calls (voice chat and real phone "
-"calls). Please make at least one voice call using the Google Talk plugin "
-"installable through the GMail interface, and then log out from your account "
-"everywhere. Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This is where you set up your SIP (VoIP) accounts ts like Sipgate, "
-"SipSorcery, the popular Betamax providers, and any other providers with SIP "
-"settings in order to start using them for dialing and receiving calls (SIP "
-"uri and real phone calls). Click \"Add\" to add as many accounts as you wish."
-msgstr ""
-
-msgid ""
-"This option should be set to \"Yes\" if you have a DID (real telephone "
-"number) associated with this SIP account or want to receive SIP uri calls "
-"through this provider."
-msgstr ""
-
-msgid ""
-"This section contains settings that do not need to be changed under normal "
-"circumstances. In addition, here you can configure your system for use with "
-"remote SIP devices, and resolve call quality issues by enabling the "
-"insertion of QoS rules."
-msgstr ""
-
-msgid ""
-"Use (four to five digit) numeric user name if you are connecting normal "
-"telephones with ATAs to this system (so they can dial user names)."
-msgstr ""
-
-msgid ""
-"Use this account to make outgoing calls as configured in the \"Call Routing"
-"\" section."
-msgstr ""
-
-msgid "Use this account to make outgoing calls."
-msgstr ""
-
-msgid "User Accounts"
-msgstr ""
-
-msgid "User Agent String"
-msgstr ""
-
-msgid "User Name"
-msgstr ""
-
-msgid "Uses providers enabled for outgoing calls"
-msgstr ""
-
-msgid ""
-"When somebody starts voice chat with your GTalk account or calls the GVoice, "
-"number (if you have Google Voice), the call will be forwarded to any users "
-"that are online (registered using a SIP device or softphone) and permitted "
-"to receive the call. If you have Google Voice, you must go to your GVoice "
-"settings and forward calls to Google chat in order to actually receive calls "
-"made to your GVoice number. If you have trouble receiving calls from GVoice, "
-"experiment with the Call Screening option in your GVoice Settings. Finally, "
-"make sure no other client is online with this account (browser in gmail, "
-"mobile/desktop Google Talk App) as it may interfere."
-msgstr ""
-
-msgid ""
-"When your password is saved, it disappears from this field and is not "
-"displayed for your protection. The previously saved password will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
-
-msgid "Yes"
-msgstr ""
-
-msgid ""
-"You can enter your domain name, external IP address, or dynamic domain name "
-"here Please keep in mind that if your IP address is dynamic and it changes "
-"your configuration will become invalid. Hence, it's recommended to set up "
-"Dynamic DNS in this case."
-msgstr ""
-
-msgid "You can specify a real name to show up in the Caller ID here."
-msgstr ""
-
-msgid ""
-"You can use your SIP devices/softphones with this system from a remote "
-"location as well, as long as your Internet Service Provider gives you a "
-"public IP. You will be able to call other local users for free (e.g. other "
-"Analog Telephone Adapters (ATAs)) and use your VoIP providers to make calls "
-"as if you were local to the PBX. After configuring this tab, go back to "
-"where users are configured and see the new Server and Port setting you need "
-"to configure the remote SIP devices with. Please note that if this PBX is "
-"not running on your router/gateway, you will need to configure port "
-"forwarding (NAT) on your router/gateway. Please forward the ports below (SIP "
-"port and RTP range) to the IP address of the device running this PBX."
-msgstr ""
-
-msgid ""
-"Your PIN disappears when saved for your protection. It will be changed only "
-"when you enter a value different from the saved one. Leaving the PIN empty "
-"is possible, but please beware of the security implications."
-msgstr ""
-
-msgid ""
-"Your password disappears when saved for your protection. It will be changed "
-"only when you enter a value different from the saved one."
-msgstr ""
diff --git a/po/zh_TW/polipo.po b/po/zh_TW/polipo.po
deleted file mode 100644
index 664714f..0000000
--- a/po/zh_TW/polipo.po
+++ /dev/null
@@ -1,201 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Always use system DNS resolver"
-msgstr ""
-
-msgid ""
-"Basic HTTP authentication supported. Provide username and password in "
-"username:password format."
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "DNS and Query Settings"
-msgstr ""
-
-msgid "DNS server address"
-msgstr ""
-
-msgid "Delete cache files time"
-msgstr ""
-
-msgid "Disk cache location"
-msgstr ""
-
-msgid "Do not query IPv6"
-msgstr ""
-
-msgid "Enable if cache (proxy) is shared by multiple users."
-msgstr ""
-
-msgid "First PMM segment size (in bytes)"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "How much RAM should Polipo use for its cache."
-msgstr ""
-
-msgid "In RAM cache size (in bytes)"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid ""
-"Location where polipo will cache files permanently. Use of external storage "
-"devices is recommended, because the cache can grow considerably. Leave it "
-"empty to disable on-disk cache."
-msgstr ""
-
-msgid "Log file location"
-msgstr ""
-
-msgid "Log to syslog"
-msgstr ""
-
-msgid "Logging and RAM"
-msgstr ""
-
-msgid "Never use system DNS resolver"
-msgstr ""
-
-msgid "On-Disk Cache"
-msgstr ""
-
-msgid "PMM segments size (in bytes)"
-msgstr ""
-
-msgid "Parent Proxy"
-msgstr ""
-
-msgid "Parent proxy address"
-msgstr ""
-
-msgid ""
-"Parent proxy address (in host:port format), to which Polipo will forward the "
-"requests."
-msgstr ""
-
-msgid "Parent proxy authentication"
-msgstr ""
-
-msgid "Polipo"
-msgstr ""
-
-msgid "Polipo Status"
-msgstr ""
-
-msgid "Polipo is a small and fast caching web proxy."
-msgstr ""
-
-msgid "Poor Man's Multiplexing"
-msgstr ""
-
-msgid ""
-"Poor Man's Multiplexing (PMM) is a technique that simulates multiplexing by "
-"requesting an instance in multiple segments. It tries to lower the latency "
-"caused by the weakness of HTTP protocol. NOTE: some sites may not work with "
-"PMM enabled."
-msgstr ""
-
-msgid "Port on which Polipo will listen"
-msgstr ""
-
-msgid "Proxy"
-msgstr ""
-
-msgid "Query DNS by hostname"
-msgstr ""
-
-msgid "Query DNS directly, fallback to system resolver"
-msgstr ""
-
-msgid "Query DNS directly, for unknown hosts fall back to system resolver"
-msgstr ""
-
-msgid "Query DNS for IPv6"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv4"
-msgstr ""
-
-msgid "Query IPv4 and IPv6, prefer IPv6"
-msgstr ""
-
-msgid "Query only IPv6"
-msgstr ""
-
-msgid ""
-"Set the DNS server address to use, if you want Polipo to use different DNS "
-"server than the host system."
-msgstr ""
-
-msgid "Shared cache"
-msgstr ""
-
-msgid ""
-"Size of the first PMM segment. If not defined, it defaults to twice the PMM "
-"segment size."
-msgstr ""
-
-msgid "Size to which cached files should be truncated"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Syslog facility"
-msgstr ""
-
-msgid ""
-"The interface on which Polipo will listen. To listen on all interfaces use "
-"0.0.0.0 or :: (IPv6)."
-msgstr ""
-
-msgid "Time after which cached files will be deleted"
-msgstr ""
-
-msgid "Time after which cached files will be truncated"
-msgstr ""
-
-msgid "To enable PMM, PMM segment size must be set to some positive value."
-msgstr ""
-
-msgid "Truncate cache files size (in bytes)"
-msgstr ""
-
-msgid "Truncate cache files time"
-msgstr ""
-
-msgid ""
-"Use of external storage device is recommended, because the log file is "
-"written frequently and can grow considerably."
-msgstr ""
-
-msgid ""
-"When listen address is set to 0.0.0.0 or :: (IPv6), you must list clients "
-"that are allowed to connect. The format is IP address or network address "
-"(192.168.1.123, 192.168.1.0/24, 2001:660:116::/48 (IPv6))"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/zh_TW/qos.po b/po/zh_TW/qos.po
deleted file mode 100644
index 1d01d37..0000000
--- a/po/zh_TW/qos.po
+++ /dev/null
@@ -1,97 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Calculate overhead"
-msgstr ""
-
-msgid "Classification Rules"
-msgstr ""
-
-msgid "Classification group"
-msgstr ""
-
-msgid "Destination host"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Download speed (kbit/s)"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Half-duplex"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Internet Connection"
-msgstr ""
-
-msgid "Number of bytes"
-msgstr ""
-
-msgid "Ports"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "QoS"
-msgstr ""
-
-msgid "Quality of Service"
-msgstr ""
-
-msgid "Service"
-msgstr ""
-
-msgid "Source host"
-msgstr ""
-
-msgid "Target"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upload speed (kbit/s)"
-msgstr ""
-
-msgid ""
-"With <abbr title=\"Quality of Service\">QoS</abbr> you can prioritize "
-"network traffic selected by addresses, ports or services."
-msgstr ""
-
-msgid "all"
-msgstr ""
-
-msgid "allf"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "express"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "normal"
-msgstr ""
-
-msgid "priority"
-msgstr ""
-
-msgid "qos_connbytes"
-msgstr ""
diff --git a/po/zh_TW/radvd.po b/po/zh_TW/radvd.po
deleted file mode 100644
index aed76c5..0000000
--- a/po/zh_TW/radvd.po
+++ /dev/null
@@ -1,366 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "6to4 interface"
-msgstr ""
-
-msgid "Address"
-msgstr ""
-
-msgid "Addresses"
-msgstr ""
-
-msgid "Advanced"
-msgstr ""
-
-msgid "Advertise Home Agent flag"
-msgstr ""
-
-msgid "Advertise router address"
-msgstr ""
-
-msgid "Advertised Domain Suffixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 RDNSS. If empty, the current IPv6 address of the interface "
-"is used"
-msgstr ""
-
-msgid "Advertised IPv6 prefixes"
-msgstr ""
-
-msgid ""
-"Advertised IPv6 prefixes. If empty, the current interface prefix is used"
-msgstr ""
-
-msgid "Advertises Mobile IPv6 Home Agent capability (RFC3775)"
-msgstr ""
-
-msgid "Advertises Mobile Router registration capability (NEMO Basic)"
-msgstr ""
-
-msgid ""
-"Advertises assumed reachability time in milliseconds of neighbours in the RA "
-"if specified. 0 disables reachability advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the default Hop Count value for outgoing unicast packets in the "
-"RA. 0 disables hopcount advertisements"
-msgstr ""
-
-msgid "Advertises the default router preference"
-msgstr ""
-
-msgid ""
-"Advertises the given link MTU in the RA if specified. 0 disables MTU "
-"advertisements"
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that addresses generated from the "
-"prefix via stateless address autoconfiguration remain preferred."
-msgstr ""
-
-msgid ""
-"Advertises the length of time in seconds that the prefix is valid for the "
-"purpose of on-link determination."
-msgstr ""
-
-msgid ""
-"Advertises the lifetime of the default router in seconds. 0 indicates that "
-"the node is no default router"
-msgstr ""
-
-msgid ""
-"Advertises the time in seconds the router is offering Mobile IPv6 Home Agent "
-"services"
-msgstr ""
-
-msgid ""
-"Advertises wait time in milliseconds between Neighbor Solicitation messages "
-"in the RA if specified. 0 disables retransmit advertisements"
-msgstr ""
-
-msgid "Advertising"
-msgstr ""
-
-msgid "Autonomous"
-msgstr ""
-
-msgid "Clients"
-msgstr ""
-
-msgid "Configuration flag"
-msgstr ""
-
-msgid "Current hop limit"
-msgstr ""
-
-msgid "DNSSL"
-msgstr ""
-
-msgid "DNSSL Configuration"
-msgstr ""
-
-msgid "Default lifetime"
-msgstr ""
-
-msgid "Default preference"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Enable advertisements"
-msgstr ""
-
-msgid "Enables router advertisements and solicitations"
-msgstr ""
-
-msgid ""
-"Enables the additional stateful administered autoconfiguration protocol "
-"(RFC2462)"
-msgstr ""
-
-msgid ""
-"Enables the autoconfiguration of additional, non address information "
-"(RFC2462)"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Home Agent information"
-msgstr ""
-
-msgid "Home Agent lifetime"
-msgstr ""
-
-msgid "Home Agent preference"
-msgstr ""
-
-msgid "Include Home Agent Information in the RA"
-msgstr ""
-
-msgid "Include Mobile IPv6 Advertisement Interval option to RA"
-msgstr ""
-
-msgid "Includes the link-layer address of the outgoing interface in the RA"
-msgstr ""
-
-msgid ""
-"Indicates that the address of interface is sent instead of network prefix, "
-"as is required by Mobile IPv6"
-msgstr ""
-
-msgid ""
-"Indicates that the underlying link is not broadcast capable, prevents "
-"unsolicited advertisements from being sent"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for autonomous address configuration "
-"(RFC4862)"
-msgstr ""
-
-msgid ""
-"Indicates that this prefix can be used for on-link determination (RFC4861)"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Interface Configuration"
-msgstr ""
-
-msgid "Interface required"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Lifetime"
-msgstr ""
-
-msgid "Link MTU"
-msgstr ""
-
-msgid "Managed flag"
-msgstr ""
-
-msgid "Max. interval"
-msgstr ""
-
-msgid "Maximum advertisement interval"
-msgstr ""
-
-msgid "Minimum advertisement delay"
-msgstr ""
-
-msgid "Minimum advertisement interval"
-msgstr ""
-
-msgid "Mobile IPv6"
-msgstr ""
-
-msgid "Mobile IPv6 interval option"
-msgstr ""
-
-msgid "Mobile IPv6 router registration"
-msgstr ""
-
-msgid "Multicast"
-msgstr ""
-
-msgid "On-link"
-msgstr ""
-
-msgid "On-link determination"
-msgstr ""
-
-msgid "Preference"
-msgstr ""
-
-msgid "Preferred lifetime"
-msgstr ""
-
-msgid "Prefix"
-msgstr ""
-
-msgid "Prefix Configuration"
-msgstr ""
-
-msgid "Prefixes"
-msgstr ""
-
-msgid "RDNSS"
-msgstr ""
-
-msgid "RDNSS Configuration"
-msgstr ""
-
-msgid "Radvd"
-msgstr ""
-
-msgid "Radvd - DNSSL"
-msgstr ""
-
-msgid "Radvd - Interface %q"
-msgstr ""
-
-msgid "Radvd - Prefix"
-msgstr ""
-
-msgid "Radvd - RDNSS"
-msgstr ""
-
-msgid "Radvd - Route"
-msgstr ""
-
-msgid ""
-"Radvd is a router advertisement daemon for IPv6. It listens to router "
-"solicitations and sends router advertisements as described in RFC 4861."
-msgstr ""
-
-msgid "Reachable time"
-msgstr ""
-
-msgid ""
-"Restrict communication to specified clients, leave empty to use multicast"
-msgstr ""
-
-msgid "Retransmit timer"
-msgstr ""
-
-msgid "Route Configuration"
-msgstr ""
-
-msgid "Routes"
-msgstr ""
-
-msgid "Source link-layer address"
-msgstr ""
-
-msgid ""
-"Specifies a logical interface name to derive a 6to4 prefix from. The "
-"interfaces public IPv4 address is combined with 2002::/3 and the value of "
-"the prefix option"
-msgstr ""
-
-msgid "Specifies the lifetime associated with the route in seconds."
-msgstr ""
-
-msgid "Specifies the logical interface name this section belongs to"
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the DNSSL entries are used for name "
-"resolution."
-msgstr ""
-
-msgid ""
-"Specifies the maximum duration how long the RDNSS entries are used for name "
-"resolution."
-msgstr ""
-
-msgid "Specifies the preference associated with the default router"
-msgstr ""
-
-msgid "Suffix"
-msgstr ""
-
-msgid ""
-"The maximum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending multicast router advertisements "
-"from the interface, in seconds"
-msgstr ""
-
-msgid ""
-"The minimum time allowed between sending unsolicited multicast router "
-"advertisements from the interface, in seconds"
-msgstr ""
-
-msgid "The preference for the Home Agent sending this RA"
-msgstr ""
-
-msgid "Timing"
-msgstr ""
-
-msgid "Unicast only"
-msgstr ""
-
-msgid "Valid lifetime"
-msgstr ""
-
-msgid "Validity time"
-msgstr ""
-
-msgid "default"
-msgstr ""
-
-msgid "high"
-msgstr ""
-
-msgid "low"
-msgstr ""
-
-msgid "medium"
-msgstr ""
-
-msgid "no"
-msgstr ""
-
-msgid "yes"
-msgstr ""
diff --git a/po/zh_TW/rrdtool.po b/po/zh_TW/rrdtool.po
deleted file mode 100644
index 9245260..0000000
--- a/po/zh_TW/rrdtool.po
+++ /dev/null
@@ -1,355 +0,0 @@
-#  rrdtool.pot
-#  generated from ./applications/luci-statistics/luasrc/i18n/rrdtool.en.lua
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=ASCII\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. %H: Wireless - Signal Noise Ratio
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:1
-msgid "stat_dg_title_wireless__signal_noise"
-msgstr ""
-
-#. dBm
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:2
-msgid "stat_dg_label_wireless__signal_noise"
-msgstr ""
-
-#. Noise Level
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:3
-msgid "stat_ds_signal_noise"
-msgstr ""
-
-#. Signal Strength
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:4
-msgid "stat_ds_signal_power"
-msgstr ""
-
-#. %H: Wireless - Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:5
-msgid "stat_dg_title_wireless__signal_quality"
-msgstr ""
-
-#. n
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:6
-msgid "stat_dg_label_wireless__signal_quality"
-msgstr ""
-
-#. Signal Quality
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:7
-msgid "stat_ds_signal_quality"
-msgstr ""
-
-#. %H: ICMP Roundtrip Times
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:8
-msgid "stat_dg_title_ping"
-msgstr ""
-
-#. ms
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:9
-msgid "stat_dg_label_ping"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:10
-msgid "stat_ds_ping"
-msgstr ""
-
-#. %H: Firewall - Processed Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:11
-msgid "stat_dg_title_iptables__ipt_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:12
-msgid "stat_dg_label_iptables__ipt_packets"
-msgstr ""
-
-#. Chain \"%di\"
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:13
-msgid "stat_ds_ipt_packets"
-msgstr ""
-
-#. %H: Netlink - Transfer on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:14
-msgid "stat_dg_title_netlink__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:15
-msgid "stat_dg_label_netlink__if_octets"
-msgstr ""
-
-#. Bytes (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:16
-msgid "stat_ds_if_octets"
-msgstr ""
-
-#. %H: Netlink - Packets on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:17
-msgid "stat_dg_title_netlink__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:18
-msgid "stat_dg_label_netlink__if_packets"
-msgstr ""
-
-#. Processed (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:19
-msgid "stat_ds_if_packets"
-msgstr ""
-
-#. Dropped   (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:20
-msgid "stat_ds_if_dropped"
-msgstr ""
-
-#. Errors    (%ds)
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:21
-msgid "stat_ds_if_errors"
-msgstr ""
-
-#. %H: Netlink - Multicast on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:22
-msgid "stat_dg_title_netlink__if_multicast"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:23
-msgid "stat_dg_label_netlink__if_multicast"
-msgstr ""
-
-#. Packets
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:24
-msgid "stat_ds_if_multicast"
-msgstr ""
-
-#. %H: Netlink - Collisions on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:25
-msgid "stat_dg_title_netlink__if_collisions"
-msgstr ""
-
-#. Collisions/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:26
-msgid "stat_dg_label_netlink__if_collisions"
-msgstr ""
-
-#. Collisions
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:27
-msgid "stat_ds_if_collisions"
-msgstr ""
-
-#. %H: Netlink - Errors on %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:28
-msgid "stat_dg_title_netlink__if_tx_errors"
-msgstr ""
-
-#. Errors/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:29
-msgid "stat_dg_label_netlink__if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:30
-msgid "stat_ds_if_tx_errors"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:31
-msgid "stat_ds_if_rx_errors"
-msgstr ""
-
-#. %H: Processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:32
-msgid "stat_dg_title_processes"
-msgstr ""
-
-#. Processes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:33
-msgid "stat_dg_label_processes"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:34
-msgid "stat_ds_ps_state"
-msgstr ""
-
-#. %H: Process %pi - used cpu time
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:35
-msgid "stat_dg_title_processes__ps_cputime"
-msgstr ""
-
-#. Jiffies
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:36
-msgid "stat_dg_label_processes__ps_cputime"
-msgstr ""
-
-#. system
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:37
-msgid "stat_ds_ps_cputime__syst"
-msgstr ""
-
-#. user
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:38
-msgid "stat_ds_ps_cputime__user"
-msgstr ""
-
-#. %H: Process %pi - threads and processes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:39
-msgid "stat_dg_title_processes__ps_count"
-msgstr ""
-
-#. Count
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:40
-msgid "stat_dg_label_processes__ps_count"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:41
-msgid "stat_ds_ps_count"
-msgstr ""
-
-#. %H: Process %pi - page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:42
-msgid "stat_dg_title_processes__ps_pagefaults"
-msgstr ""
-
-#. Pagefaults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:43
-msgid "stat_dg_label_processes__ps_pagefaults"
-msgstr ""
-
-#. page faults
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:44
-msgid "stat_ds_ps_pagefaults"
-msgstr ""
-
-#. %H: Process %pi - virtual memory size
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:45
-msgid "stat_dg_title_processes__ps_rss"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:46
-msgid "stat_dg_label_processes__ps_rss"
-msgstr ""
-
-#. virtual memory
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:47
-msgid "stat_ds_ps_rss"
-msgstr ""
-
-#. %H: Usage on Processor #%pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:48
-msgid "stat_dg_title_cpu"
-msgstr ""
-
-#. %
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:49
-msgid "stat_dg_label_cpu"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:50
-msgid "stat_ds_cpu"
-msgstr ""
-
-#. %H: Transfer on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:51
-msgid "stat_dg_title_interface__if_octets"
-msgstr ""
-
-#. Bytes/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:52
-msgid "stat_dg_label_interface__if_octets"
-msgstr ""
-
-#. %H: Packets on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:53
-msgid "stat_dg_title_interface__if_packets"
-msgstr ""
-
-#. Packets/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:54
-msgid "stat_dg_label_interface__if_packets"
-msgstr ""
-
-#. %H: TCP-Connections to Port %pi
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:55
-msgid "stat_dg_title_tcpconns"
-msgstr ""
-
-#. Connections/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:56
-msgid "stat_dg_label_tcpconns"
-msgstr ""
-
-#. %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:57
-msgid "stat_ds_tcp_connections"
-msgstr ""
-
-#. %H: Disk Space Usage on %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:58
-msgid "stat_dg_title_df"
-msgstr ""
-
-#. Bytes
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:59
-msgid "stat_dg_label_df"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:60
-msgid "stat_ds_df__free"
-msgstr ""
-
-#. %ds
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:61
-msgid "stat_ds_df__used"
-msgstr ""
-
-#. %H: Interrupts
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:62
-msgid "stat_dg_title_irq"
-msgstr ""
-
-#. Issues/s
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:63
-msgid "stat_dg_label_irq"
-msgstr ""
-
-#. IRQ %di
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:64
-msgid "stat_ds_irq"
-msgstr ""
-
-#. %H: System Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:65
-msgid "stat_dg_title_load"
-msgstr ""
-
-#. Load
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:66
-msgid "stat_dg_label_load"
-msgstr ""
-
-#. 1 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:67
-msgid "stat_ds_load__shortterm"
-msgstr ""
-
-#. 5 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:68
-msgid "stat_ds_load__midterm"
-msgstr ""
-
-#. 15 min
-#: applications/luci-statistics/luasrc/i18n/rrdtool.en.lua:69
-msgid "stat_ds_load__longterm"
-msgstr ""
diff --git a/po/zh_TW/samba.po b/po/zh_TW/samba.po
deleted file mode 100644
index 5f3c86e..0000000
--- a/po/zh_TW/samba.po
+++ /dev/null
@@ -1,72 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Allow guests"
-msgstr ""
-
-msgid "Allow system users to reach their home directories via network shares"
-msgstr ""
-
-msgid "Allowed users"
-msgstr ""
-
-msgid "Create mask"
-msgstr ""
-
-msgid "Description"
-msgstr ""
-
-msgid "Directory mask"
-msgstr ""
-
-msgid "Edit Template"
-msgstr ""
-
-msgid "Edit the template that is used for generating the samba configuration."
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "Mask for new directories"
-msgstr ""
-
-msgid "Mask for new files"
-msgstr ""
-
-msgid "Name"
-msgstr ""
-
-msgid "Network Shares"
-msgstr ""
-
-msgid "Path"
-msgstr ""
-
-msgid "Read-only"
-msgstr ""
-
-msgid "Share home-directories"
-msgstr ""
-
-msgid "Shared Directories"
-msgstr ""
-
-msgid ""
-"This is the content of the file '/etc/samba/smb.conf.template' from which "
-"your samba configuration will be generated. Values enclosed by pipe symbols "
-"('|') should not be changed. They get their values from the 'General "
-"Settings' tab."
-msgstr ""
-
-msgid "Workgroup"
-msgstr ""
diff --git a/po/zh_TW/splash.po b/po/zh_TW/splash.po
deleted file mode 100644
index b29ebad..0000000
--- a/po/zh_TW/splash.po
+++ /dev/null
@@ -1,307 +0,0 @@
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Accept"
-msgstr ""
-
-msgid ""
-"Access to the internet might be possible nevertheless, because some "
-"activists of this project share their private internet connections. These "
-"few connections are shared between all users. That means available bandwidth "
-"is limited and because of this we ask you not to do any of the following:"
-msgstr ""
-
-msgid ""
-"Access to the network is not guaranteed. It can be interrupted at any time "
-"without notice for any reason, for certain devices, and/or may be blocked "
-"for certain users."
-msgstr ""
-
-msgid "Active Clients"
-msgstr ""
-
-msgid "Allowed hosts/subnets"
-msgstr ""
-
-msgid ""
-"As an alternative to editing the complete splash text you can also just "
-"include some custom text in the default splash page by entering it here."
-msgstr ""
-
-msgid ""
-"Bandwidth limit for clients is only activated when both up- and download "
-"limit are set. Use a value of 0 here to completely disable this limitation. "
-"Whitelisted clients are not limited."
-msgstr ""
-
-msgid ""
-"Become an active member of this community and help by operating your own node"
-msgstr ""
-
-msgid "Blacklist"
-msgstr ""
-
-msgid "Blocked"
-msgstr ""
-
-msgid ""
-"By accepting these rules you can use this network for %s hour(s). After this "
-"time you need to accept these rules again."
-msgstr ""
-
-msgid "Clearance time"
-msgstr ""
-
-msgid "Client-Splash"
-msgstr ""
-
-msgid ""
-"Client-Splash is a hotspot authentification system for wireless mesh "
-"networks."
-msgstr ""
-
-msgid ""
-"Clients are redirected to this page after they have accepted the splash. If "
-"this is left empty they are redirected to the page they had requested."
-msgstr ""
-
-msgid "Clients download speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid ""
-"Clients that have accepted the splash are allowed to use the network for "
-"that many hours."
-msgstr ""
-
-msgid "Clients upload speed is limited to this value (kbyte/s)"
-msgstr ""
-
-msgid "Contact"
-msgstr ""
-
-msgid "Decline"
-msgstr ""
-
-msgid ""
-"Destination hosts and networks that are excluded from splashing, i.e. they "
-"are always allowed."
-msgstr ""
-
-msgid "Donate some money to help us keep this project alive."
-msgstr ""
-
-msgid "Download limit"
-msgstr ""
-
-msgid "Edit the complete splash text"
-msgstr ""
-
-msgid "Fair Use Policy"
-msgstr ""
-
-msgid "Firewall zone"
-msgstr ""
-
-msgid "General"
-msgstr ""
-
-msgid "Get in %s with the operator of this access point."
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid ""
-"Hosts and Networks that are listed here are excluded from splashing, i.e. "
-"they are always allowed."
-msgstr ""
-
-msgid "IP Address"
-msgstr ""
-
-msgid ""
-"If you operate your own wifi equipment use channels different from ours."
-msgstr ""
-
-msgid "If you use this network on a regular basis we ask for your support:"
-msgstr ""
-
-msgid "Include your own text in the default splash"
-msgstr ""
-
-msgid "Intercept client traffic on this Interface"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interfaces that are used for Splash."
-msgstr ""
-
-msgid ""
-"KB/s (Download/Upload). You may be able to remove this limit by actively "
-"contributing to this project."
-msgstr ""
-
-msgid "Legally Prohibited Activities"
-msgstr ""
-
-msgid "Legally Prohibited content"
-msgstr ""
-
-msgid "MAC Address"
-msgstr ""
-
-msgid "MAC addresses in this list are blocked."
-msgstr ""
-
-msgid ""
-"MAC addresses of whitelisted clients. These do not need to accept the splash "
-"and are not bandwidth limited."
-msgstr ""
-
-msgid "Netmask"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "No clients connected"
-msgstr ""
-
-msgid ""
-"Please note that we are not an internet service provider but an experimental "
-"community network."
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Redirect target"
-msgstr ""
-
-msgid "Safety"
-msgstr ""
-
-msgid "Save"
-msgstr ""
-
-msgid "Splash rules are integrated in this firewall zone"
-msgstr ""
-
-msgid "Splashtext"
-msgstr ""
-
-msgid ""
-"The network, like the Internet, is unencrypted and open. Each participant is "
-"responsible for the safety of their own connections and devices."
-msgstr ""
-
-msgid ""
-"The open and free wireless network of volunteers (\"Operators\") provides "
-"the necessary equipment and Internet connections (\"Infrastructure\") at "
-"their own expense."
-msgstr ""
-
-msgid ""
-"The operator claims no liability for loss of data, unauthorized access/"
-"damage to devices, or financial losses that participants may suffer from the "
-"use of the network."
-msgstr ""
-
-msgid ""
-"The participant agrees to not perform any action and refrain from acts which "
-"may violate the law or infringe upon the rights of third parties."
-msgstr ""
-
-msgid ""
-"The participant agrees to not transfer content over the network which "
-"violates the law."
-msgstr ""
-
-msgid ""
-"The participant agrees to not use the network in any way which will harm the "
-"infrastructure, the network itself, its operators or other participants."
-msgstr ""
-
-msgid ""
-"These Terms of Use govern the use of the network by its participants' "
-"computer, PDA, or similar device (\"Devices\") within the network."
-msgstr ""
-
-msgid "Time remaining"
-msgstr ""
-
-msgid ""
-"To ask for the reason why you have been blocked or ask for access again you "
-"can try to contact the owner of this access point:"
-msgstr ""
-
-msgid "Traffic in/out"
-msgstr ""
-
-msgid "Upload limit"
-msgstr ""
-
-msgid "Usage Agreement"
-msgstr ""
-
-msgid "Welcome"
-msgstr ""
-
-msgid "Whitelist"
-msgstr ""
-
-msgid "You are now connected to the free wireless mesh network"
-msgstr ""
-
-msgid ""
-"You can enter your own text that is displayed to clients here.<br />It is "
-"possible to use the following markers: ###COMMUNITY###, ###COMMUNITY_URL###, "
-"###CONTACTURL###, ###LEASETIME###, ###LIMIT### and ###ACCEPT###."
-msgstr ""
-
-msgid ""
-"Your access to this network has been blocked, most likely because you did "
-"something that our rules explicitly forbid."
-msgstr ""
-
-msgid "Your bandwidth is limited to"
-msgstr ""
-
-msgid "blacklisted"
-msgstr ""
-
-msgid "expired"
-msgstr ""
-
-msgid "optional when using host addresses"
-msgstr ""
-
-msgid "perform any kind of illegal activities"
-msgstr ""
-
-msgid "splashed"
-msgstr ""
-
-msgid "temporarily blocked"
-msgstr ""
-
-msgid "unknown"
-msgstr ""
-
-msgid "use filesharing applications on this network"
-msgstr ""
-
-msgid "waste bandwidth with unneccesary downloads or streams"
-msgstr ""
-
-msgid "whitelisted"
-msgstr ""
diff --git a/po/zh_TW/statistics.po b/po/zh_TW/statistics.po
deleted file mode 100644
index 7f4e7e4..0000000
--- a/po/zh_TW/statistics.po
+++ /dev/null
@@ -1,592 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Action (target)"
-msgstr ""
-
-msgid "Add command for reading values"
-msgstr ""
-
-msgid "Add matching rule"
-msgstr ""
-
-msgid "Add multiple hosts separated by space."
-msgstr ""
-
-msgid "Add notification command"
-msgstr ""
-
-msgid "Base Directory"
-msgstr ""
-
-msgid "Basic monitoring"
-msgstr ""
-
-msgid "CPU Plugin Configuration"
-msgstr ""
-
-msgid "CSV Output"
-msgstr ""
-
-msgid "CSV Plugin Configuration"
-msgstr ""
-
-msgid "Cache collected data for"
-msgstr ""
-
-msgid "Cache flush interval"
-msgstr ""
-
-msgid "Chain"
-msgstr ""
-
-msgid "CollectLinks"
-msgstr ""
-
-msgid "CollectRoutes"
-msgstr ""
-
-msgid "CollectTopology"
-msgstr ""
-
-msgid "Collectd"
-msgstr ""
-
-msgid "Collectd Settings"
-msgstr ""
-
-msgid ""
-"Collectd is a small daemon for collecting data from various sources through "
-"different plugins. On this page you can change general settings for the "
-"collectd daemon."
-msgstr ""
-
-msgid "Conntrack"
-msgstr ""
-
-msgid "Conntrack Plugin Configuration"
-msgstr ""
-
-msgid "DF Plugin Configuration"
-msgstr ""
-
-msgid "DNS"
-msgstr ""
-
-msgid "DNS Plugin Configuration"
-msgstr ""
-
-msgid "Data collection interval"
-msgstr ""
-
-msgid "Datasets definition file"
-msgstr ""
-
-msgid "Destination ip range"
-msgstr ""
-
-msgid "Directory for collectd plugins"
-msgstr ""
-
-msgid "Directory for sub-configurations"
-msgstr ""
-
-msgid "Disk Plugin Configuration"
-msgstr ""
-
-msgid "Disk Space Usage"
-msgstr ""
-
-msgid "Disk Usage"
-msgstr ""
-
-msgid "Display Host »"
-msgstr ""
-
-msgid "Display timespan »"
-msgstr ""
-
-msgid "E-Mail Plugin Configuration"
-msgstr ""
-
-msgid "Email"
-msgstr ""
-
-msgid "Enable this plugin"
-msgstr ""
-
-msgid "Exec"
-msgstr ""
-
-msgid "Exec Plugin Configuration"
-msgstr ""
-
-msgid "Filter class monitoring"
-msgstr ""
-
-msgid "Firewall"
-msgstr ""
-
-msgid "Flush cache after"
-msgstr ""
-
-msgid "Forwarding between listen and server addresses"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd in "
-"order to read certain values. The values will be read from stdout."
-msgstr ""
-
-msgid ""
-"Here you can define external commands which will be started by collectd when "
-"certain threshold values have been reached. The values leading to invokation "
-"will be feeded to the the called programs stdin."
-msgstr ""
-
-msgid ""
-"Here you can define various criteria by which the monitored iptables rules "
-"are selected."
-msgstr ""
-
-msgid "Host"
-msgstr ""
-
-msgid "Hostname"
-msgstr ""
-
-msgid "IP or hostname where to get the txtinfo output from"
-msgstr ""
-
-msgid "IRQ Plugin Configuration"
-msgstr ""
-
-msgid "Ignore source addresses"
-msgstr ""
-
-msgid "Incoming interface"
-msgstr ""
-
-msgid "Interface Plugin Configuration"
-msgstr ""
-
-msgid "Interfaces"
-msgstr ""
-
-msgid "Interrupts"
-msgstr ""
-
-msgid "Interval for pings"
-msgstr ""
-
-msgid "Iptables Plugin Configuration"
-msgstr ""
-
-msgid "Leave unselected to automatically determine interfaces to monitor."
-msgstr ""
-
-msgid "Listen host"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Listener interfaces"
-msgstr ""
-
-msgid "Load Plugin Configuration"
-msgstr ""
-
-msgid "Maximum allowed connections"
-msgstr ""
-
-msgid "Memory"
-msgstr ""
-
-msgid "Memory Plugin Configuration"
-msgstr ""
-
-msgid "Monitor all except specified"
-msgstr ""
-
-msgid "Monitor all local listen ports"
-msgstr ""
-
-msgid "Monitor devices"
-msgstr ""
-
-msgid "Monitor disks and partitions"
-msgstr ""
-
-msgid "Monitor filesystem types"
-msgstr ""
-
-msgid "Monitor hosts"
-msgstr ""
-
-msgid "Monitor interfaces"
-msgstr ""
-
-msgid "Monitor interrupts"
-msgstr ""
-
-msgid "Monitor local ports"
-msgstr ""
-
-msgid "Monitor mount points"
-msgstr ""
-
-msgid "Monitor processes"
-msgstr ""
-
-msgid "Monitor remote ports"
-msgstr ""
-
-msgid "Name of the rule"
-msgstr ""
-
-msgid "Netlink"
-msgstr ""
-
-msgid "Netlink Plugin Configuration"
-msgstr ""
-
-msgid "Network"
-msgstr ""
-
-msgid "Network Plugin Configuration"
-msgstr ""
-
-msgid "Network plugins"
-msgstr ""
-
-msgid "Network protocol"
-msgstr ""
-
-msgid "Number of threads for data collection"
-msgstr ""
-
-msgid "OLSRd"
-msgstr ""
-
-msgid "OLSRd Plugin Configuration"
-msgstr ""
-
-msgid "Only create average RRAs"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Outgoing interface"
-msgstr ""
-
-msgid "Output plugins"
-msgstr ""
-
-msgid "Ping"
-msgstr ""
-
-msgid "Ping Plugin Configuration"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Processes"
-msgstr ""
-
-msgid "Processes Plugin Configuration"
-msgstr ""
-
-msgid "Processes to monitor separated by space"
-msgstr ""
-
-msgid "Processor"
-msgstr ""
-
-msgid "Qdisc monitoring"
-msgstr ""
-
-msgid "RRD XFiles Factor"
-msgstr ""
-
-msgid "RRD heart beat interval"
-msgstr ""
-
-msgid "RRD step interval"
-msgstr ""
-
-msgid "RRDTool"
-msgstr ""
-
-msgid "RRDTool Plugin Configuration"
-msgstr ""
-
-msgid "Rows per RRA"
-msgstr ""
-
-msgid "Script"
-msgstr ""
-
-msgid "Seconds"
-msgstr ""
-
-msgid "Server host"
-msgstr ""
-
-msgid "Server port"
-msgstr ""
-
-msgid "Shaping class monitoring"
-msgstr ""
-
-msgid "Socket file"
-msgstr ""
-
-msgid "Socket group"
-msgstr ""
-
-msgid "Socket permissions"
-msgstr ""
-
-msgid "Source ip range"
-msgstr ""
-
-msgid "Specifies what information to collect about links."
-msgstr ""
-
-msgid "Specifies what information to collect about routes."
-msgstr ""
-
-msgid "Specifies what information to collect about the global topology."
-msgstr ""
-
-msgid "Statistics"
-msgstr ""
-
-msgid "Storage directory"
-msgstr ""
-
-msgid "Storage directory for the csv files"
-msgstr ""
-
-msgid "Store data values as rates instead of absolute values"
-msgstr ""
-
-msgid "Stored timespans"
-msgstr ""
-
-msgid "System Load"
-msgstr ""
-
-msgid "System plugins"
-msgstr ""
-
-msgid "TCP Connections"
-msgstr ""
-
-msgid "TCPConns Plugin Configuration"
-msgstr ""
-
-msgid "TTL for network packets"
-msgstr ""
-
-msgid "TTL for ping packets"
-msgstr ""
-
-msgid "Table"
-msgstr ""
-
-msgid "The NUT plugin reads information about Uninterruptible Power Supplies."
-msgstr ""
-
-msgid ""
-"The OLSRd plugin reads information about meshed networks from the txtinfo "
-"plugin of OLSRd."
-msgstr ""
-
-msgid ""
-"The conntrack plugin collects statistics about the number of tracked "
-"connections."
-msgstr ""
-
-msgid "The cpu plugin collects basic statistics about the processor usage."
-msgstr ""
-
-msgid ""
-"The csv plugin stores collected data in csv file format for further "
-"processing by external programs."
-msgstr ""
-
-msgid ""
-"The df plugin collects statistics about the disk space usage on different "
-"devices, mount points or filesystem types."
-msgstr ""
-
-msgid ""
-"The disk plugin collects detailled usage statistics for selected partitions "
-"or whole disks."
-msgstr ""
-
-msgid ""
-"The dns plugin collects detailled statistics about dns related traffic on "
-"selected interfaces."
-msgstr ""
-
-msgid ""
-"The email plugin creates a unix socket which can be used to transmit email-"
-"statistics to a running collectd daemon. This plugin is primarily intended "
-"to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd but can "
-"be used in other ways as well."
-msgstr ""
-
-msgid ""
-"The exec plugin starts external commands to read values from or to notify "
-"external processes when certain threshold values have been reached."
-msgstr ""
-
-msgid ""
-"The interface plugin collects traffic statistics on selected interfaces."
-msgstr ""
-
-msgid ""
-"The iptables plugin will monitor selected firewall rules and collect "
-"informations about processed bytes and packets per rule."
-msgstr ""
-
-msgid ""
-"The irq plugin will monitor the rate of issues per second for each selected "
-"interrupt. If no interrupt is selected then all interrupts are monitored."
-msgstr ""
-
-msgid ""
-"The iwinfo plugin collects statistics about wireless signal strength, noise "
-"and quality."
-msgstr ""
-
-msgid "The load plugin collects statistics about the general system load."
-msgstr ""
-
-msgid "The memory plugin collects statistics about the memory usage."
-msgstr ""
-
-msgid ""
-"The netlink plugin collects extended informations like qdisc-, class- and "
-"filter-statistics for selected interfaces."
-msgstr ""
-
-msgid ""
-"The network plugin provides network based communication between different "
-"collectd instances. Collectd can operate both in client and server mode. In "
-"client mode locally collected date is transferred to a collectd server "
-"instance, in server mode the local instance receives data from other hosts."
-msgstr ""
-
-msgid ""
-"The ping plugin will send icmp echo replies to selected hosts and measure "
-"the roundtrip time for each host."
-msgstr ""
-
-msgid ""
-"The processes plugin collects informations like cpu time, page faults and "
-"memory usage of selected processes."
-msgstr ""
-
-msgid ""
-"The rrdtool plugin stores the collected data in rrd database files, the "
-"foundation of the diagrams.<br /><br /><strong>Warning: Setting the wrong "
-"values will result in a very high memory consumption in the temporary "
-"directory. This can render the device unusable!</strong>"
-msgstr ""
-
-msgid ""
-"The statistics package is based on <a href=\"http://collectd.org/index.shtml"
-"\">Collectd</a> and uses <a href=\"http://oss.oetiker.ch/rrdtool/\">RRD "
-"Tool</a> to render diagram images from collected data."
-msgstr ""
-
-msgid ""
-"The tcpconns plugin collects informations about open tcp connections on "
-"selected ports."
-msgstr ""
-
-msgid ""
-"The unixsock plugin creates a unix socket which can be used to read "
-"collected data from a running collectd instance."
-msgstr ""
-
-msgid ""
-"This section defines on which interfaces collectd will wait for incoming "
-"connections."
-msgstr ""
-
-msgid ""
-"This section defines to which servers the locally collected data is sent to."
-msgstr ""
-
-msgid "Try to lookup fully qualified hostname"
-msgstr ""
-
-msgid "UPS"
-msgstr ""
-
-msgid "UPS Plugin Configuration"
-msgstr ""
-
-msgid "UPS name in NUT ups@host format"
-msgstr ""
-
-msgid "UnixSock"
-msgstr ""
-
-msgid "Unixsock Plugin Configuration"
-msgstr ""
-
-msgid "Used PID file"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Verbose monitoring"
-msgstr ""
-
-msgid "Wireless"
-msgstr ""
-
-msgid "Wireless iwinfo Plugin Configuration"
-msgstr ""
-
-msgid "e.g. br-ff"
-msgstr ""
-
-msgid "e.g. br-lan"
-msgstr ""
-
-msgid "e.g. reject-with tcp-reset"
-msgstr ""
-
-msgid "max. 16 chars"
-msgstr ""
-
-msgid "reduces rrd size"
-msgstr ""
-
-msgid "seconds; multiple separated by space"
-msgstr ""
-
-msgid "server interfaces"
-msgstr ""
diff --git a/po/zh_TW/tinyproxy.po b/po/zh_TW/tinyproxy.po
deleted file mode 100644
index 849fcde..0000000
--- a/po/zh_TW/tinyproxy.po
+++ /dev/null
@@ -1,254 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"<em>Via proxy</em> routes requests to the given target via the specifed "
-"upstream proxy, <em>Reject access</em> disables any upstream proxy for the "
-"target"
-msgstr ""
-
-msgid ""
-"Adds an \"X-Tinyproxy\" HTTP header with the client IP address to forwarded "
-"requests"
-msgstr ""
-
-msgid "Allowed clients"
-msgstr ""
-
-msgid "Allowed connect ports"
-msgstr ""
-
-msgid "Bind address"
-msgstr ""
-
-msgid ""
-"By default, basic POSIX expressions are used for filtering. Enable this to "
-"activate extended regular expressions"
-msgstr ""
-
-msgid ""
-"By default, filter strings are treated as case-insensitive. Enable this to "
-"make the matching case-sensitive"
-msgstr ""
-
-msgid ""
-"By default, filtering is done based on domain names. Enable this to match "
-"against URLs instead"
-msgstr ""
-
-msgid ""
-"By default, the filter rules act as blacklist. Enable this option to only "
-"allow matched URLs or domain names"
-msgstr ""
-
-msgid ""
-"Can be either an IP address or range, a domain name or \".\" for any host "
-"without domain"
-msgstr ""
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Connection timeout"
-msgstr ""
-
-msgid "Default deny"
-msgstr ""
-
-msgid "Enable Tinyproxy server"
-msgstr ""
-
-msgid "Error page"
-msgstr ""
-
-msgid "Failed to retrieve statistics from url:"
-msgstr ""
-
-msgid "Filter by RegExp"
-msgstr ""
-
-msgid "Filter by URLs"
-msgstr ""
-
-msgid "Filter case-sensitive"
-msgstr ""
-
-msgid "Filter file"
-msgstr ""
-
-msgid "Filtering and ACLs"
-msgstr ""
-
-msgid "General settings"
-msgstr ""
-
-msgid "Group"
-msgstr ""
-
-msgid "HTML template file to serve for stat host requests"
-msgstr ""
-
-msgid "HTML template file to serve when HTTP errors occur"
-msgstr ""
-
-msgid "Header whitelist"
-msgstr ""
-
-msgid ""
-"List of IP addresses or ranges which are allowed to use the proxy server"
-msgstr ""
-
-msgid ""
-"List of allowed ports for the CONNECT method. A single value \"0\" allows "
-"all ports"
-msgstr ""
-
-msgid "Listen address"
-msgstr ""
-
-msgid "Listen port"
-msgstr ""
-
-msgid "Log file"
-msgstr ""
-
-msgid "Log file to use for dumping messages"
-msgstr ""
-
-msgid "Log level"
-msgstr ""
-
-msgid "Logging verbosity of the Tinyproxy process"
-msgstr ""
-
-msgid "Max. clients"
-msgstr ""
-
-msgid "Max. requests per server"
-msgstr ""
-
-msgid "Max. spare servers"
-msgstr ""
-
-msgid "Maximum allowed number of concurrently connected clients"
-msgstr ""
-
-msgid ""
-"Maximum allowed number of requests per process. If it is exeeded, the "
-"process is restarted. Zero means unlimited."
-msgstr ""
-
-msgid "Maximum number of prepared idle processes"
-msgstr ""
-
-msgid "Maximum number of seconds an inactive connection is held open"
-msgstr ""
-
-msgid "Min. spare servers"
-msgstr ""
-
-msgid "Minimum number of prepared idle processes"
-msgstr ""
-
-msgid "Number of idle processes to start when launching Tinyproxy"
-msgstr ""
-
-msgid "Plaintext file with URLs or domains to filter. One entry per line"
-msgstr ""
-
-msgid "Policy"
-msgstr ""
-
-msgid "Privacy settings"
-msgstr ""
-
-msgid "Reject access"
-msgstr ""
-
-msgid "Server Settings"
-msgstr ""
-
-msgid "Server limits"
-msgstr ""
-
-msgid ""
-"Specifies HTTP header names which are allowed to pass-through, all others "
-"are discarded. Leave empty to disable header filtering"
-msgstr ""
-
-msgid "Specifies the HTTP port Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the Tinyproxy hostname to use in the Via HTTP header"
-msgstr ""
-
-msgid ""
-"Specifies the address Tinyproxy binds to for outbound forwarded requests"
-msgstr ""
-
-msgid "Specifies the addresses Tinyproxy is listening on for requests"
-msgstr ""
-
-msgid "Specifies the group name the Tinyproxy process is running as"
-msgstr ""
-
-msgid ""
-"Specifies the upstream proxy to use for accessing the target host. Format is "
-"<code>address:port</code>"
-msgstr ""
-
-msgid "Specifies the user name the Tinyproxy process is running as"
-msgstr ""
-
-msgid "Start spare servers"
-msgstr ""
-
-msgid "Statistics page"
-msgstr ""
-
-msgid "Status"
-msgstr ""
-
-msgid "Target host"
-msgstr ""
-
-msgid "Tinyproxy"
-msgstr ""
-
-msgid "Tinyproxy Status"
-msgstr ""
-
-msgid "Tinyproxy is a small and fast non-caching HTTP(S)-Proxy"
-msgstr ""
-
-msgid "Upstream Proxies"
-msgstr ""
-
-msgid ""
-"Upstream proxy rules define proxy servers to use when accessing certain IP "
-"addresses or domains."
-msgstr ""
-
-msgid "Use syslog"
-msgstr ""
-
-msgid "User"
-msgstr ""
-
-msgid "Via hostname"
-msgstr ""
-
-msgid "Via proxy"
-msgstr ""
-
-msgid "Writes log messages to syslog instead of a log file"
-msgstr ""
-
-msgid "X-Tinyproxy header"
-msgstr ""
diff --git a/po/zh_TW/transmission.po b/po/zh_TW/transmission.po
deleted file mode 100644
index 647bac3..0000000
--- a/po/zh_TW/transmission.po
+++ /dev/null
@@ -1,289 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Alternative download speed"
-msgstr ""
-
-msgid "Alternative speed enabled"
-msgstr ""
-
-msgid "Alternative speed time begin"
-msgstr ""
-
-msgid "Alternative speed time day"
-msgstr ""
-
-msgid "Alternative speed time end"
-msgstr ""
-
-msgid "Alternative speed timing enabled"
-msgstr ""
-
-msgid "Alternative upload speed"
-msgstr ""
-
-msgid "Automatically start added torrents"
-msgstr ""
-
-msgid "Bandwidth settings"
-msgstr ""
-
-msgid "Binding address IPv4"
-msgstr ""
-
-msgid "Binding address IPv6"
-msgstr ""
-
-msgid "Block list enabled"
-msgstr ""
-
-msgid "Blocklist URL"
-msgstr ""
-
-msgid "Blocklists"
-msgstr ""
-
-msgid "Cache size in MB"
-msgstr ""
-
-msgid "Config file directory"
-msgstr ""
-
-msgid "DHT enabled"
-msgstr ""
-
-msgid "Debug"
-msgstr ""
-
-msgid "Download directory"
-msgstr ""
-
-msgid "Download queue enabled"
-msgstr ""
-
-msgid "Download queue size"
-msgstr ""
-
-msgid "Enable watch directory"
-msgstr ""
-
-msgid "Enabled"
-msgstr ""
-
-msgid "Encryption"
-msgstr ""
-
-msgid "Error"
-msgstr ""
-
-msgid "Fast"
-msgstr ""
-
-msgid "Files and Locations"
-msgstr ""
-
-msgid "Forced"
-msgstr ""
-
-msgid "Full"
-msgstr ""
-
-msgid "Global peer limit"
-msgstr ""
-
-msgid "Global settings"
-msgstr ""
-
-msgid "Idle seeding limit"
-msgstr ""
-
-msgid "Idle seeding limit enabled"
-msgstr ""
-
-msgid "Incomplete directory"
-msgstr ""
-
-msgid "Incomplete directory enabled"
-msgstr ""
-
-msgid "Info"
-msgstr ""
-
-msgid "LPD enabled"
-msgstr ""
-
-msgid "Lazy bitfield enabled"
-msgstr ""
-
-msgid "Message level"
-msgstr ""
-
-msgid "Miscellaneous"
-msgstr ""
-
-msgid "None"
-msgstr ""
-
-msgid ""
-"Number/bitfield. Start with 0, then for each day you want the scheduler "
-"enabled, add a value. For Sunday - 1, Monday - 2, Tuesday - 4, Wednesday - "
-"8, Thursday - 16, Friday - 32, Saturday - 64"
-msgstr ""
-
-msgid "Off"
-msgstr ""
-
-msgid "Open Web Interface"
-msgstr ""
-
-msgid "PEX enabled"
-msgstr ""
-
-msgid "Peer Port settings"
-msgstr ""
-
-msgid "Peer congestion algorithm"
-msgstr ""
-
-msgid "Peer limit per torrent"
-msgstr ""
-
-msgid "Peer port"
-msgstr ""
-
-msgid "Peer port random high"
-msgstr ""
-
-msgid "Peer port random low"
-msgstr ""
-
-msgid "Peer port random on start"
-msgstr ""
-
-msgid "Peer settings"
-msgstr ""
-
-msgid "Peer socket tos"
-msgstr ""
-
-msgid "Port forwarding enabled"
-msgstr ""
-
-msgid "Preferred"
-msgstr ""
-
-msgid "Prefetch enabled"
-msgstr ""
-
-msgid "Queue stalled enabled"
-msgstr ""
-
-msgid "Queue stalled minutes"
-msgstr ""
-
-msgid "Queueing"
-msgstr ""
-
-msgid "RPC URL"
-msgstr ""
-
-msgid "RPC authentication required"
-msgstr ""
-
-msgid "RPC bind address"
-msgstr ""
-
-msgid "RPC enabled"
-msgstr ""
-
-msgid "RPC password"
-msgstr ""
-
-msgid "RPC port"
-msgstr ""
-
-msgid "RPC settings"
-msgstr ""
-
-msgid "RPC username"
-msgstr ""
-
-msgid "RPC whitelist"
-msgstr ""
-
-msgid "RPC whitelist enabled"
-msgstr ""
-
-msgid "Ratio limit"
-msgstr ""
-
-msgid "Ratio limit enabled"
-msgstr ""
-
-msgid "Rename partial files"
-msgstr ""
-
-msgid "Run daemon as user"
-msgstr ""
-
-msgid "Scheduling"
-msgstr ""
-
-msgid "Scrape paused torrents enabled"
-msgstr ""
-
-msgid "Script torrent done enabled"
-msgstr ""
-
-msgid "Script torrent done filename"
-msgstr ""
-
-msgid "Seed queue enabled"
-msgstr ""
-
-msgid "Seed queue size"
-msgstr ""
-
-msgid "Speed limit down"
-msgstr ""
-
-msgid "Speed limit down enabled"
-msgstr ""
-
-msgid "Speed limit up"
-msgstr ""
-
-msgid "Speed limit up enabled"
-msgstr ""
-
-msgid "Transmission"
-msgstr ""
-
-msgid ""
-"Transmission daemon is a simple bittorrent client, here you can configure "
-"the settings."
-msgstr ""
-
-msgid "Trash original torrent files"
-msgstr ""
-
-msgid "Upload slots per torrent"
-msgstr ""
-
-msgid "Watch directory"
-msgstr ""
-
-msgid "in minutes from midnight"
-msgstr ""
-
-msgid "preallocation"
-msgstr ""
-
-msgid "uTP enabled"
-msgstr ""
diff --git a/po/zh_TW/upnp.po b/po/zh_TW/upnp.po
deleted file mode 100644
index ad994bf..0000000
--- a/po/zh_TW/upnp.po
+++ /dev/null
@@ -1,143 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid ""
-"ACLs specify which external ports may be redirected to which internal "
-"addresses and ports"
-msgstr ""
-
-msgid "Action"
-msgstr ""
-
-msgid "Active UPnP Redirects"
-msgstr ""
-
-msgid "Advanced Settings"
-msgstr ""
-
-msgid "Allow adding forwards only to requesting ip addresses"
-msgstr ""
-
-msgid "Announced model number"
-msgstr ""
-
-msgid "Announced serial number"
-msgstr ""
-
-msgid "Clean rules interval"
-msgstr ""
-
-msgid "Clean rules threshold"
-msgstr ""
-
-msgid "Client Address"
-msgstr ""
-
-msgid "Client Port"
-msgstr ""
-
-msgid "Collecting data..."
-msgstr ""
-
-msgid "Comment"
-msgstr ""
-
-msgid "Delete Redirect"
-msgstr ""
-
-msgid "Device UUID"
-msgstr ""
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Enable NAT-PMP functionality"
-msgstr ""
-
-msgid "Enable UPnP functionality"
-msgstr ""
-
-msgid "Enable additional logging"
-msgstr ""
-
-msgid "Enable secure mode"
-msgstr ""
-
-msgid "External Port"
-msgstr ""
-
-msgid "External ports"
-msgstr ""
-
-msgid "General Settings"
-msgstr ""
-
-msgid "Internal addresses"
-msgstr ""
-
-msgid "Internal ports"
-msgstr ""
-
-msgid "MiniUPnP ACLs"
-msgstr ""
-
-msgid "MiniUPnP settings"
-msgstr ""
-
-msgid "Notify interval"
-msgstr ""
-
-msgid "Port"
-msgstr ""
-
-msgid "Presentation URL"
-msgstr ""
-
-msgid "Protocol"
-msgstr ""
-
-msgid "Puts extra debugging information into the system log"
-msgstr ""
-
-msgid "Report system instead of daemon uptime"
-msgstr ""
-
-msgid "Start UPnP and NAT-PMP service"
-msgstr ""
-
-msgid "There are no active redirects."
-msgstr ""
-
-msgid "UPNP"
-msgstr ""
-
-msgid ""
-"UPNP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid ""
-"UPnP allows clients in the local network to automatically configure the "
-"router."
-msgstr ""
-
-msgid "UPnP lease file"
-msgstr ""
-
-msgid "Universal Plug & Play"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Value in KByte/s, informational only"
-msgstr ""
-
-msgid "enable"
-msgstr ""
diff --git a/po/zh_TW/ushare.po b/po/zh_TW/ushare.po
deleted file mode 100644
index 0343cf6..0000000
--- a/po/zh_TW/ushare.po
+++ /dev/null
@@ -1,44 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Content directories"
-msgstr ""
-
-msgid "Disable telnet console"
-msgstr ""
-
-msgid "Disable webinterface"
-msgstr ""
-
-msgid "Enable"
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Options"
-msgstr ""
-
-msgid "Servername"
-msgstr ""
-
-msgid "Settings"
-msgstr ""
-
-msgid "Username"
-msgstr ""
-
-msgid "uShare"
-msgstr ""
-
-msgid ""
-"uShare is a UPnP (TM) A/V & DLNA Media Server. It implements the server "
-"component that provides UPnP media devices with information on available "
-"multimedia files."
-msgstr ""
diff --git a/po/zh_TW/uvc_streamer.po b/po/zh_TW/uvc_streamer.po
deleted file mode 100644
index 5620dec..0000000
--- a/po/zh_TW/uvc_streamer.po
+++ /dev/null
@@ -1,37 +0,0 @@
-#  uvc_streamer.pot
-#  generated from ./applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Frames per second
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:1
-msgid "Frames per second"
-msgstr ""
-
-#. Resolution
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:2
-msgid "Resolution"
-msgstr ""
-
-#. Settings
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:3
-msgid "Settings"
-msgstr ""
-
-#. Webcam streaming
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:4
-msgid "Webcam streaming"
-msgstr ""
-
-#. Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a href=\"http://%s:%i/\">http://%s:%i/</a>
-#: applications/luci-uvc_streamer/luasrc/i18n/uvc_streamer.en.lua:5
-msgid ""
-"Configure your Linux-UVC compatible webcam. Point your browser to e.g. <a "
-"href=\"http://%s:%i/\">http://%s:%i/</a>"
-msgstr ""
diff --git a/po/zh_TW/vnstat.po b/po/zh_TW/vnstat.po
deleted file mode 100644
index 30ac388..0000000
--- a/po/zh_TW/vnstat.po
+++ /dev/null
@@ -1,57 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Configuration"
-msgstr ""
-
-msgid "Daily traffic"
-msgstr ""
-
-msgid "Graphs"
-msgstr ""
-
-msgid "Hourly traffic"
-msgstr ""
-
-msgid "Monitor selected interfaces"
-msgstr ""
-
-msgid "Monthly traffic"
-msgstr ""
-
-msgid ""
-"No database has been set up yet. Go to the VnStat configuration and enable "
-"monitoring for one or more interfaces."
-msgstr ""
-
-msgid "Restart VnStat"
-msgstr ""
-
-msgid "Summary display"
-msgstr ""
-
-msgid "Top 10 display"
-msgstr ""
-
-msgid "Update »"
-msgstr ""
-
-msgid "VnStat"
-msgstr ""
-
-msgid "VnStat Graphs"
-msgstr ""
-
-msgid "VnStat Traffic Monitor"
-msgstr ""
-
-msgid ""
-"VnStat is a network traffic monitor for Linux that keeps a log of network "
-"traffic for the selected interface(s)."
-msgstr ""
diff --git a/po/zh_TW/voice_core.po b/po/zh_TW/voice_core.po
deleted file mode 100644
index e9f91fc..0000000
--- a/po/zh_TW/voice_core.po
+++ /dev/null
@@ -1,14 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Phones"
-msgstr ""
-
-msgid "Voice"
-msgstr ""
diff --git a/po/zh_TW/voice_diag.po b/po/zh_TW/voice_diag.po
deleted file mode 100644
index 191fc1a..0000000
--- a/po/zh_TW/voice_diag.po
+++ /dev/null
@@ -1,21 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Diagnostics"
-msgstr ""
-
-msgid ""
-"The diagnostics available on your device depend on the modules that you have "
-"installed."
-msgstr ""
-
-msgid ""
-"Under this menu are options that allow you to configure and perform tests on "
-"the voice operations of your system. These are known as diagnostics."
-msgstr ""
diff --git a/po/zh_TW/watchcat.po b/po/zh_TW/watchcat.po
deleted file mode 100644
index 540a580..0000000
--- a/po/zh_TW/watchcat.po
+++ /dev/null
@@ -1,52 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Forced reboot delay"
-msgstr ""
-
-msgid "Host address to ping"
-msgstr ""
-
-msgid ""
-"How often to check internet connection. Default unit is seconds, you can you "
-"use the suffix 'm' for minutes, 'h' for hours or 'd' for days"
-msgstr ""
-
-msgid ""
-"In periodic mode, it defines the reboot period. In internet mode, it defines "
-"the longest period of time without internet access before a reboot is "
-"engaged.Default unit is seconds, you can use the suffix 'm' for minutes, 'h' "
-"for hours or 'd' for days"
-msgstr ""
-
-msgid "Operating mode"
-msgstr ""
-
-msgid "Period"
-msgstr ""
-
-msgid "Ping host"
-msgstr ""
-
-msgid "Ping period"
-msgstr ""
-
-msgid "Watchcat"
-msgstr ""
-
-msgid ""
-"Watchcat allows to configure a periodic reboot and/or when internet "
-"connection has been lost for a certain period of time."
-msgstr ""
-
-msgid ""
-"When rebooting the system the watchcat will trigger a soft reboot, Entering "
-"a non zero value here, will trigger a delayed hard reboot if the soft reboot "
-"fails. Enter a number of seconds to enable, use 0 to disable"
-msgstr ""
diff --git a/po/zh_TW/wol.po b/po/zh_TW/wol.po
deleted file mode 100644
index b9095bb..0000000
--- a/po/zh_TW/wol.po
+++ /dev/null
@@ -1,43 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Broadcast on all interfaces"
-msgstr ""
-
-msgid "Choose the host to wake up or enter a custom MAC address to use"
-msgstr ""
-
-msgid "Host to wake up"
-msgstr ""
-
-msgid "Network interface to use"
-msgstr ""
-
-msgid ""
-"Sometimes only one of both tools work. If one of fails, try the other one"
-msgstr ""
-
-msgid "Specifies the interface the WoL packet is sent on"
-msgstr ""
-
-msgid "Starting WoL utility:"
-msgstr ""
-
-msgid "Wake on LAN"
-msgstr ""
-
-msgid ""
-"Wake on LAN is a mechanism to remotely boot computers in the local network."
-msgstr ""
-
-msgid "Wake up host"
-msgstr ""
-
-msgid "WoL program"
-msgstr ""
diff --git a/po/zh_TW/wshaper.po b/po/zh_TW/wshaper.po
deleted file mode 100644
index cd90b21..0000000
--- a/po/zh_TW/wshaper.po
+++ /dev/null
@@ -1,49 +0,0 @@
-msgid ""
-msgstr ""
-"Content-Type: text/plain; charset=UTF-8\n"
-"Project-Id-Version: PACKAGE VERSION\n"
-"Last-Translator: Automatically generated\n"
-"Language-Team: none\n"
-"MIME-Version: 1.0\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-msgid "Downlink"
-msgstr ""
-
-msgid "Downstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Host or Network in CIDR notation."
-msgstr ""
-
-msgid "Interface"
-msgstr ""
-
-msgid "Low priority destination ports"
-msgstr ""
-
-msgid "Low priority hosts (Destination)"
-msgstr ""
-
-msgid "Low priority hosts (Source)"
-msgstr ""
-
-msgid "Low priority source ports"
-msgstr ""
-
-msgid "Uplink"
-msgstr ""
-
-msgid "Upstream bandwidth in kbit/s"
-msgstr ""
-
-msgid "Wondershaper"
-msgstr ""
-
-msgid "Wondershaper settings"
-msgstr ""
-
-msgid ""
-"Wondershaper uses traffic shaping to ensure low latencies for interactive "
-"traffic even when your internet connection is highly saturated."
-msgstr ""
